12 - XORG_RELEASES=https://xorg.freedesktop.org/releases/individual
13 - XCB_RELEASES=https://xcb.freedesktop.org/dist
14 - WAYLAND_RELEASES=https://wayland.freedesktop.org/releases
15 - XORGMACROS_VERSION=util-macros-1.19.0
16 - GLPROTO_VERSION=glproto-1.4.17
17 - DRI2PROTO_VERSION=dri2proto-2.8
18 - LIBPCIACCESS_VERSION=libpciaccess-0.13.4
19 - LIBDRM_VERSION=libdrm-2.4.74
20 - XCBPROTO_VERSION=xcb-proto-1.13
21 - RANDRPROTO_VERSION=randrproto-1.3.0
22 - LIBXRANDR_VERSION=libXrandr-1.3.0
23 - LIBXCB_VERSION=libxcb-1.13
24 - LIBXSHMFENCE_VERSION=libxshmfence-1.2
25 - LIBVDPAU_VERSION=libvdpau-1.1
26 - LIBVA_VERSION=libva-1.7.0
27 - LIBWAYLAND_VERSION=wayland-1.15.0
28 - WAYLAND_PROTOCOLS_VERSION=wayland-protocols-1.8
29 - PKG_CONFIG_PATH=$HOME/prefix/lib/pkgconfig:$HOME/prefix/share/pkgconfig
30 - LD_LIBRARY_PATH="$HOME/prefix/lib:$LD_LIBRARY_PATH"
31 - PATH="$HOME/prefix/bin:$PATH"
36 - LABEL="meson Vulkan"
40 - VULKAN_DRIVERS="intel,amd"
42 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
46 - llvm-toolchain-trusty-6.0
47 # llvm-6 depends on gcc-4.9 which is not in main repo
48 - ubuntu-toolchain-r-test
58 - LABEL="meson loaders/classic DRI"
60 - DRI_DRIVERS="i915,i965,r100,r200,swrast,nouveau"
67 - x11proto-xf86vidmode-dev
74 - LABEL="make loaders/classic DRI"
77 - MAKE_CHECK_COMMAND="make check"
78 - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa"
79 - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau"
80 - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
83 - LIBUNWIND_FLAGS="--disable-libunwind"
88 - x11proto-xf86vidmode-dev
94 # NOTE: Building SWR is 2x (yes two) times slower than all the other
95 # gallium drivers combined.
96 # Start this early so that it doesn't hunder the run time.
97 - LABEL="make Gallium Drivers SWR"
100 - MAKE_CHECK_COMMAND="true"
102 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
103 - OVERRIDE_CC="gcc-4.8"
104 - OVERRIDE_CXX="g++-4.8"
105 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
107 - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
108 - GALLIUM_DRIVERS="swr"
110 - LIBUNWIND_FLAGS="--enable-libunwind"
114 - llvm-toolchain-trusty-5.0
116 # LLVM packaging is broken and misses these dependencies
122 - x11proto-xf86vidmode-dev
128 - LABEL="make Gallium Drivers RadeonSI"
131 - MAKE_CHECK_COMMAND="true"
133 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
134 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
136 - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
137 - GALLIUM_DRIVERS="radeonsi"
139 - LIBUNWIND_FLAGS="--enable-libunwind"
143 - llvm-toolchain-trusty-6.0
144 # llvm-6 depends on gcc-4.9 which is not in main repo
145 - ubuntu-toolchain-r-test
151 - x11proto-xf86vidmode-dev
157 - LABEL="make Gallium Drivers Other"
160 - MAKE_CHECK_COMMAND="true"
162 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
163 # New binutils linker is required for llvm-3.9
164 - OVERRIDE_PATH=/usr/lib/binutils-2.26/bin
165 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
167 - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
168 - GALLIUM_DRIVERS="i915,nouveau,pl111,r300,r600,freedreno,svga,swrast,v3d,vc4,virgl,etnaviv,imx"
170 - LIBUNWIND_FLAGS="--enable-libunwind"
174 - llvm-toolchain-trusty-3.9
177 # LLVM packaging is broken and misses these dependencies
183 - x11proto-xf86vidmode-dev
189 # NOTE: Analogous to SWR above, building Clover is quite slow.
190 - LABEL="make Gallium ST Clover LLVM-3.9"
193 - MAKE_CHECK_COMMAND="true"
195 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
196 - OVERRIDE_CC=gcc-4.7
197 - OVERRIDE_CXX=g++-4.7
198 # New binutils linker is required for llvm-3.9
199 - OVERRIDE_PATH=/usr/lib/binutils-2.26/bin
200 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
202 - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
203 - GALLIUM_DRIVERS="r600"
205 - LIBUNWIND_FLAGS="--enable-libunwind"
209 - llvm-toolchain-trusty-3.9
213 # LLVM packaging is broken and misses these dependencies
222 - x11proto-xf86vidmode-dev
228 # NOTE: Analogous to SWR above, building Clover is quite slow.
229 - LABEL="make Gallium ST Clover LLVM-4.0"
232 - MAKE_CHECK_COMMAND="true"
234 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
235 - OVERRIDE_CC=gcc-4.8
236 - OVERRIDE_CXX=g++-4.8
237 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
239 - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
240 - GALLIUM_DRIVERS="r600"
242 - LIBUNWIND_FLAGS="--enable-libunwind"
246 - llvm-toolchain-trusty-4.0
249 # LLVM packaging is broken and misses these dependencies
258 - x11proto-xf86vidmode-dev
264 # NOTE: Analogous to SWR above, building Clover is quite slow.
265 - LABEL="make Gallium ST Clover LLVM-5.0"
268 - MAKE_CHECK_COMMAND="true"
270 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
271 - OVERRIDE_CC=gcc-4.8
272 - OVERRIDE_CXX=g++-4.8
273 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
275 - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
276 - GALLIUM_DRIVERS="r600"
278 - LIBUNWIND_FLAGS="--enable-libunwind"
282 - llvm-toolchain-trusty-5.0
285 # LLVM packaging is broken and misses these dependencies
294 - x11proto-xf86vidmode-dev
300 # NOTE: Analogous to SWR above, building Clover is quite slow.
301 - LABEL="make Gallium ST Clover LLVM-6.0"
304 - MAKE_CHECK_COMMAND="true"
306 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
307 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
309 - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
310 - GALLIUM_DRIVERS="r600,radeonsi"
312 - LIBUNWIND_FLAGS="--enable-libunwind"
316 - llvm-toolchain-trusty-6.0
317 # llvm-6 depends on gcc-4.9 which is not in main repo
318 - ubuntu-toolchain-r-test
327 - x11proto-xf86vidmode-dev
333 - LABEL="make Gallium ST Other"
336 - MAKE_CHECK_COMMAND="true"
338 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
339 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl"
341 - GALLIUM_ST="--enable-dri --disable-opencl --enable-xa --enable-nine --enable-xvmc --enable-vdpau --enable-va --enable-omx-bellagio --enable-gallium-osmesa"
342 # We need swrast for osmesa and nine.
343 # i915 most likely doesn't work with most ST.
344 # Regardless - we're doing a quick build test here.
345 - GALLIUM_DRIVERS="i915,swrast"
347 - LIBUNWIND_FLAGS="--enable-libunwind"
351 # We actually want to test against llvm-3.3
353 # Nine requires gcc 4.6... which is the one we have right ?
355 # Build locally, for now.
358 - libomxil-bellagio-dev
359 # LLVM packaging is broken and misses these dependencies
363 - x11proto-xf86vidmode-dev
369 - LABEL="make Vulkan"
372 - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check"
374 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
375 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland"
377 - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx-bellagio --disable-gallium-osmesa"
379 - VULKAN_DRIVERS="intel,radeon"
380 - LIBUNWIND_FLAGS="--disable-libunwind"
384 - llvm-toolchain-trusty-6.0
385 # llvm-6 depends on gcc-4.9 which is not in main repo
386 - ubuntu-toolchain-r-test
392 - x11proto-xf86vidmode-dev
400 # Explicitly disable.
401 - SCONS_TARGET="llvm=0"
402 # Keep it symmetrical to the make build.
403 - SCONS_CHECK_COMMAND="scons llvm=0 check"
409 - x11proto-xf86vidmode-dev
417 - SCONS_TARGET="llvm=1"
418 # Keep it symmetrical to the make build.
419 - SCONS_CHECK_COMMAND="scons llvm=1 check"
421 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
425 # LLVM packaging is broken and misses these dependencies
430 - x11proto-xf86vidmode-dev
438 - SCONS_TARGET="swr=1"
440 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}"
441 # Keep it symmetrical to the make build. There's no actual SWR, yet.
442 - SCONS_CHECK_COMMAND="true"
443 - OVERRIDE_CC="gcc-4.8"
444 - OVERRIDE_CXX="g++-4.8"
448 - llvm-toolchain-trusty-5.0
450 # LLVM packaging is broken and misses these dependencies
456 - x11proto-xf86vidmode-dev
464 - MAKE_CHECK_COMMAND="make check"
465 - DRI_LOADERS="--with-platforms=x11 --disable-egl"
468 - LABEL="macOS meson"
474 if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
475 HOMEBREW_NO_AUTO_UPDATE=1 brew install python3 ninja expat gettext
476 # Set PATH for homebrew pip3 installs
477 PATH="$HOME/Library/Python/3.6/bin:${PATH}"
478 # Set PKG_CONFIG_PATH for keg-only expat
479 PKG_CONFIG_PATH="/usr/local/opt/expat/lib/pkgconfig:${PKG_CONFIG_PATH}"
480 # Set PATH for keg-only gettext
481 PATH="/usr/local/opt/gettext/bin:${PATH}"
483 # Install xquartz for prereqs ...
484 XQUARTZ_VERSION="2.7.11"
485 wget -nv https://dl.bintray.com/xquartz/downloads/XQuartz-${XQUARTZ_VERSION}.dmg
486 hdiutil attach XQuartz-${XQUARTZ_VERSION}.dmg
487 sudo installer -pkg /Volumes/XQuartz-${XQUARTZ_VERSION}/XQuartz.pkg -target /
488 hdiutil detach /Volumes/XQuartz-${XQUARTZ_VERSION}
490 PATH="/opt/X11/bin:${PATH}"
491 PKG_CONFIG_PATH="/opt/X11/share/pkgconfig:/opt/X11/lib/pkgconfig:${PKG_CONFIG_PATH}"
492 ACLOCAL="aclocal -I /opt/X11/share/aclocal -I /usr/local/share/aclocal"
496 # Install a more modern meson from pip, since the version in the
497 # ubuntu repos is often quite old. Avoid >=0.45.0 as it needs python
499 - if test "x$BUILD" = xmeson; then
500 pip3 install --user "meson<0.45.0";
501 pip3 install --user mako;
504 # Install autotools build dependencies
505 - if test "x$BUILD" = xmake; then
506 pip2 install --user mako;
509 # Install a more modern scons from pip.
510 - if test "x$BUILD" = xscons; then
511 pip2 install --user "scons>=2.4";
512 pip2 install --user mako;
515 # Since libdrm gets updated in configure.ac regularly, try to pick up the
516 # latest version from there.
517 - for line in `grep "^LIBDRM.*_REQUIRED=" configure.ac`; do
518 old_ver=`echo $LIBDRM_VERSION | sed 's/libdrm-//'`;
519 new_ver=`echo $line | sed 's/.*REQUIRED=//'`;
520 if `echo "$old_ver,$new_ver" | tr ',' '\n' | sort -Vc 2> /dev/null`; then
521 export LIBDRM_VERSION="libdrm-$new_ver";
525 # Install dependencies where we require specific versions (or where
526 # disallowed by Travis CI's package whitelisting).
529 if [[ "$TRAVIS_OS_NAME" == "linux" ]]; then
530 wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2
531 tar -jxvf $XORGMACROS_VERSION.tar.bz2
532 (cd $XORGMACROS_VERSION && ./configure --prefix=$HOME/prefix && make install)
534 wget $XORG_RELEASES/proto/$GLPROTO_VERSION.tar.bz2
535 tar -jxvf $GLPROTO_VERSION.tar.bz2
536 (cd $GLPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
538 wget $XORG_RELEASES/proto/$DRI2PROTO_VERSION.tar.bz2
539 tar -jxvf $DRI2PROTO_VERSION.tar.bz2
540 (cd $DRI2PROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
542 wget $XCB_RELEASES/$XCBPROTO_VERSION.tar.bz2
543 tar -jxvf $XCBPROTO_VERSION.tar.bz2
544 (cd $XCBPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
546 wget $XCB_RELEASES/$LIBXCB_VERSION.tar.bz2
547 tar -jxvf $LIBXCB_VERSION.tar.bz2
548 (cd $LIBXCB_VERSION && ./configure --prefix=$HOME/prefix && make install)
550 wget $XORG_RELEASES/lib/$LIBPCIACCESS_VERSION.tar.bz2
551 tar -jxvf $LIBPCIACCESS_VERSION.tar.bz2
552 (cd $LIBPCIACCESS_VERSION && ./configure --prefix=$HOME/prefix && make install)
554 wget https://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.bz2
555 tar -jxvf $LIBDRM_VERSION.tar.bz2
556 (cd $LIBDRM_VERSION && ./configure --prefix=$HOME/prefix --enable-vc4 --enable-freedreno --enable-etnaviv-experimental-api && make install)
558 wget $XORG_RELEASES/proto/$RANDRPROTO_VERSION.tar.bz2
559 tar -jxvf $RANDRPROTO_VERSION.tar.bz2
560 (cd $RANDRPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install)
562 wget $XORG_RELEASES/lib/$LIBXRANDR_VERSION.tar.bz2
563 tar -jxvf $LIBXRANDR_VERSION.tar.bz2
564 (cd $LIBXRANDR_VERSION && ./configure --prefix=$HOME/prefix && make install)
566 wget $XORG_RELEASES/lib/$LIBXSHMFENCE_VERSION.tar.bz2
567 tar -jxvf $LIBXSHMFENCE_VERSION.tar.bz2
568 (cd $LIBXSHMFENCE_VERSION && ./configure --prefix=$HOME/prefix && make install)
570 wget https://people.freedesktop.org/~aplattner/vdpau/$LIBVDPAU_VERSION.tar.bz2
571 tar -jxvf $LIBVDPAU_VERSION.tar.bz2
572 (cd $LIBVDPAU_VERSION && ./configure --prefix=$HOME/prefix && make install)
574 wget https://www.freedesktop.org/software/vaapi/releases/libva/$LIBVA_VERSION.tar.bz2
575 tar -jxvf $LIBVA_VERSION.tar.bz2
576 (cd $LIBVA_VERSION && ./configure --prefix=$HOME/prefix --disable-wayland --disable-dummy-driver && make install)
578 wget $WAYLAND_RELEASES/$LIBWAYLAND_VERSION.tar.xz
579 tar -axvf $LIBWAYLAND_VERSION.tar.xz
580 (cd $LIBWAYLAND_VERSION && ./configure --prefix=$HOME/prefix --enable-libraries --without-host-scanner --disable-documentation --disable-dtd-validation && make install)
582 wget $WAYLAND_RELEASES/$WAYLAND_PROTOCOLS_VERSION.tar.xz
583 tar -axvf $WAYLAND_PROTOCOLS_VERSION.tar.xz
584 (cd $WAYLAND_PROTOCOLS_VERSION && ./configure --prefix=$HOME/prefix && make install)
586 # Meson requires ninja >= 1.6, but trusty has 1.3.x
587 wget https://github.com/ninja-build/ninja/releases/download/v1.6.0/ninja-linux.zip
588 unzip ninja-linux.zip
589 mv ninja $HOME/prefix/bin/
591 # Generate this header since one is missing on the Travis instance
594 "#ifndef _LINUX_MEMFD_H" \
595 "#define _LINUX_MEMFD_H" \
597 "#define MFD_CLOEXEC 0x0001U" \
598 "#define MFD_ALLOW_SEALING 0x0002U" \
600 "#endif /* _LINUX_MEMFD_H */" > linux/memfd.h
602 # Generate this header, including the missing SYS_memfd_create
603 # macro, which is not provided by the header in the Travis
607 "#ifndef _SYSCALL_H" \
608 "#define _SYSCALL_H 1" \
610 "#include <asm/unistd.h>" \
613 "# include <bits/syscall.h>" \
616 "#ifndef __NR_memfd_create" \
617 "# define __NR_memfd_create 319 /* Taken from <asm/unistd_64.h> */" \
620 "#ifndef SYS_memfd_create" \
621 "# define SYS_memfd_create __NR_memfd_create" \
624 "#endif" > sys/syscall.h
628 - if test "x$BUILD" = xmake; then
629 test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC";
630 test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX";
631 test -n "$OVERRIDE_PATH" && export PATH="$OVERRIDE_PATH:$PATH";
633 export CFLAGS="$CFLAGS -isystem`pwd`";
637 ../autogen.sh --enable-debug
640 --with-dri-drivers=$DRI_DRIVERS
642 --with-gallium-drivers=$GALLIUM_DRIVERS
643 --with-vulkan-drivers=$VULKAN_DRIVERS
644 --disable-llvm-shared-libs
646 make && eval $MAKE_CHECK_COMMAND;
649 - if test "x$BUILD" = xscons; then
650 test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC";
651 test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX";
652 scons $SCONS_TARGET && eval $SCONS_CHECK_COMMAND;
656 if test "x$BUILD" = xmeson; then
658 if test "x$TRAVIS_OS_NAME" == xosx; then
659 MESON_OPTIONS="-Degl=false"
662 if test "x$TRAVIS_OS_NAME" == xlinux; then
663 MESON_OPTIONS="-Ddri-drivers=${DRI_DRIVERS:-[]} -Dgallium-drivers=${GALLIUM_DRIVERS:-[]} -Dvulkan-drivers=${VULKAN_DRIVERS:-[]}"
666 # Travis CI has moved to LLVM 5.0, and meson is detecting
667 # automatically the available version in /usr/local/bin based on
668 # the PATH env variable order preference.
670 # As for 0.44.x, Meson cannot receive the path to the
671 # llvm-config binary as a configuration parameter. See
672 # https://github.com/mesonbuild/meson/issues/2887 and
673 # https://github.com/dcbaker/meson/commit/7c8b6ee3fa42f43c9ac7dcacc61a77eca3f1bcef
675 # We want to use the custom (APT) installed version. Therefore,
676 # let's make Meson find our wanted version sooner than the one
679 # Once this is corrected, we would still need a patch similar
681 # https://lists.freedesktop.org/archives/mesa-dev/2017-December/180217.html
682 test -f /usr/bin/$LLVM_CONFIG && ln -s /usr/bin/$LLVM_CONFIG $HOME/prefix/bin/llvm-config
684 export CFLAGS="$CFLAGS -isystem`pwd`"
685 meson _build $MESON_OPTIONS