2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
29 program_transform_name
=
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir
= $(datadir)/doc
49 INSTALL_PROGRAM
= $(INSTALL
)
50 INSTALL_DATA
= $(INSTALL
)
57 # start-sanitize-chill
58 CHILLFLAGS
= $(CFLAGS
)
68 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
69 BISON
= `if [ -f $${rootme}/byacc/byacc ] ; \
70 then echo $${rootme}/byacc/byacc ; \
74 LEX
= `if [ -f $${rootme}/flex/flex ] ; \
75 then echo $${rootme}/flex/flex ; \
78 MAKEINFO
= `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
79 then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
80 else echo makeinfo ; fi`
83 # libraries that may need to be augmented on a system-by-system basis
86 # compilers to use to create programs which must be run in the build
89 CXX_FOR_BUILD
= $(CXX
)
91 SUBDIRS
= "this is set via configure, don't edit this"
95 INSTALL_TARGET
= install.
all
98 if [ -f $${rootme}/gcc/Makefile ] ; then \
99 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
101 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
104 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
108 # start-sanitize-chill
109 CHILL_FOR_TARGET
= ` \
110 if [ -f $${rootme}/gcc/Makefile ] ; then \
111 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
113 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
116 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
123 if [ -f $${rootme}/gcc/Makefile ] ; then \
124 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
126 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
129 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
134 if [ -f $${rootme}/gas/Makefile ] ; then \
135 echo $${rootme}/gas/as.new ; \
137 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
140 t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
145 if [ -f $${rootme}/binutils/Makefile ] ; then \
146 echo $${rootme}/binutils/ar ; \
148 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
151 t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
155 RANLIB_FOR_TARGET
= ` \
156 if [ -f $${rootme}/binutils/Makefile ] ; then \
157 echo $${rootme}/binutils/ranlib ; \
159 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
162 t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
167 if [ -f $${rootme}/binutils/Makefile ] ; then \
168 echo $${rootme}/binutils/nm ; \
170 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
173 t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
177 # FIXME: This is badly named.
179 if [ -f $${rootme}/gcc/Makefile ] ; then \
180 if [ -f $${rootme}/newlib/Makefile ] ; then \
181 echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
183 echo -I$${rootme}/gcc/include ; \
191 #### host and target specific makefile fragments come in here.
194 # Flags to pass down to all sub-makes.
195 # Please keep these in alphabetical order.
196 BASE_FLAGS_TO_PASS
= \
197 "AR_FLAGS=$(AR_FLAGS)" \
198 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
199 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
201 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
202 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
204 $(start-sanitize-chill
)\
205 "CHILLFLAGS=$(CHILLFLAGS)" \
206 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
207 "CHILL_LIB=$(CHILL_LIB)" \
208 $(end-sanitize-chill
)\
209 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
210 "CXXFLAGS=$(CXXFLAGS)" \
211 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
212 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
213 "INSTALL=$(INSTALL)" \
214 "INSTALL_DATA=$(INSTALL_DATA)" \
215 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
216 "LDFLAGS=$(LDFLAGS)" \
218 "LOADLIBES=$(LOADLIBES)" \
219 "MAKEINFO=$(MAKEINFO)" \
220 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
222 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
223 "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
224 "exec_prefix=$(exec_prefix)" \
228 # Flags to pass down to most sub-makes, in which we're building with
229 # the host environment.
230 # If any variables are added here, they must be added to do-*, below.
240 FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_HOST_FLAGS
)
242 # Flags that are concerned with the location of the X11 include files
244 X11_FLAGS_TO_PASS
= \
245 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
246 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
249 # Flags to pass down to makes which are built with the target environment.
250 # The double $ decreases the length of the command line; the variables
251 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
252 # If any variables are added here, they must be added to do-*, below.
253 EXTRA_TARGET_FLAGS
= \
254 'AR=$$(AR_FOR_TARGET)' \
255 'AS=$$(AS_FOR_TARGET)' \
256 'CC=$$(CC_FOR_TARGET)' \
257 'CXX=$$(CXX_FOR_TARGET)' \
258 'NM=$$(NM_FOR_TARGET)' \
259 'RANLIB=$$(RANLIB_FOR_TARGET)' \
260 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
262 TARGET_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_TARGET_FLAGS
)
264 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
265 # unfortunately needs the native compiler and the target ar and
267 # If any variables are added here, they must be added to do-*, below.
269 'AR=$$(AR_FOR_TARGET)' \
274 'RANLIB=$$(RANLIB_FOR_TARGET)' \
277 GCC_FLAGS_TO_PASS
= $(BASE_FLAGS_TO_PASS
) $(EXTRA_GCC_FLAGS
)
279 # This is a list of the targets for all the modules which are compiled
280 # using $(FLAGS_TO_PASS).
326 # This is a list of the install targets for all the modules which are
327 # compiled using $(FLAGS_TO_PASS).
374 # This is a list of the targets for all the modules which are compiled
375 # using $(X11_FLAGS_TO_PASS).
382 # This is a list of the install targets for all the modules which are
383 # compiled using $(X11_FLAGS_TO_PASS).
384 INSTALL_X11_MODULES
= \
390 # This is a list of the targets for all the modules which are compiled
391 # using $(TARGET_FLAGS_TO_PASS).
392 ALL_TARGET_MODULES
= \
393 $(start-sanitize-chill
) \
395 $(end-sanitize-chill
) \
400 # This is a list of the install targets for all the modules which are
401 # compiled using $(TARGET_FLAGS_TO_PASS).
402 INSTALL_TARGET_MODULES
= \
403 $(start-sanitize-chill
) \
405 $(end-sanitize-chill
) \
410 # This is a shell case of all modules which are compiled using
411 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
412 TARGET_LIBS
= libg
++ | newlib | xiberty
413 # start-sanitize-chill
414 TARGET_LIBS
= chillrt | libg
++ | newlib | xiberty
417 # The first rule in the file had better be this one. Don't put any above it.
421 # The target built for a native build.
425 $(ALL_TARGET_MODULES
) \
429 # The target built for a cross build.
446 $(ALL_TARGET_MODULES
)
448 # Do a target for all the subdirectories. A ``make do-X'' will do a
449 # ``make X'' in all subdirectories (because, in general, there is a
450 # dependency (below) of X upon do-X, a ``make X'' will also do this,
451 # but it may do additional work as well).
452 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
453 # because it is so large that it can easily overflow the command line
454 # length limit on some systems.
467 @target
=`echo $@ | sed -e 's/^do-//'`; \
468 rootme
=`pwd`; export rootme
; \
469 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
470 for i in
$(SUBDIRS
); do \
471 if
[ -f .
/$$i/Makefile
]; then \
474 for flag in
$(EXTRA_TARGET_FLAGS
); do \
475 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
479 for flag in
$(EXTRA_GCC_FLAGS
); do \
480 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
484 for flag in
$(EXTRA_HOST_FLAGS
); do \
485 eval
`echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
489 export AR AS CC CXX NM RANLIB XTRAFLAGS
; \
491 $(MAKE
) $(BASE_FLAGS_TO_PASS
) "AR=$${AR}" "AS=$${AS}" \
492 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
493 "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
495 then true
; else exit
1; fi
; \
499 # Here are the targets which correspond to the do-X targets.
501 .PHONY
: info check installcheck dvi install-info
502 .PHONY
: clean distclean mostlyclean realclean local-clean local-distclean
505 installcheck: do-installcheck
508 install-info
: install-info-dirs do-install-info
dir.
info
509 if
[ -f
dir.
info ] ; then \
510 $(INSTALL_DATA
) dir.
info $(infodir)/dir.
info ; \
513 do-install-info
: install-info-dirs
516 -rm -f
*.a TEMP errs core
*.o
*~ \
#* TAGS *.E
519 -rm -f Makefile config.status
521 clean: do-clean local-clean
522 mostlyclean: do-mostlyclean local-clean
523 distclean: do-distclean local-clean local-distclean
524 realclean: do-realclean local-clean local-distclean
526 # Installation targets.
528 .PHONY
: install uninstall
529 install: $(INSTALL_TARGET
)
532 @echo
"the uninstall target is not supported in this tree"
535 install.
all: install-no-fixedincludes
536 @if
[ -f .
/gcc
/Makefile
] ; then \
537 rootme
=`pwd` ; export rootme
; \
539 $(MAKE
) $(FLAGS_TO_PASS
) install-headers
) ; \
544 # install-no-fixedincludes is used because Cygnus can not distributed
545 # the fixed header files.
546 .PHONY
: install-no-fixedincludes
547 install-no-fixedincludes
: \
549 gcc-no-fixedincludes \
551 $(INSTALL_TARGET_MODULES
) \
552 $(INSTALL_X11_MODULES
)
554 # Install the gcc headers files, but not the fixed include files,
555 # which Cygnus is not allowed to distribute. This rule is very
556 # dependent on the workings of the gcc Makefile.in.
557 .PHONY
: gcc-no-fixedincludes
558 gcc-no-fixedincludes
:
559 @if
[ -f .
/gcc
/Makefile
]; then \
560 rm -rf gcc
/tmp-include
; \
561 mv gcc
/include gcc
/tmp-include
2>/dev
/null
; \
563 touch gcc
/stmp-fixincludes
; \
564 rm -f gcc
/stmp-headers
; \
565 rootme
=`pwd`; export rootme
; \
566 srcroot
=`cd $(srcdir); pwd` ; export srcroot
; \
568 $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
569 rm -rf gcc
/include; \
570 mv gcc
/tmp-include gcc
/include 2>/dev
/null
; \
573 .PHONY
: install.cross
590 $(INSTALL_TARGET_MODULES
)
592 # This rule is used to build the modules which use FLAGS_TO_PASS. To
593 # build a target all-X means to cd to X and make all.
594 # all-glob is handled specially because it doesn't actually build.
595 .PHONY
: $(ALL_MODULES
) all-glob
596 $(ALL_MODULES
) all-glob
:
597 @
dir=`echo $@ | sed -e 's/all-//'`; \
598 if
[ -f .
/$${dir}/Makefile
] ; then \
599 rootme
=`pwd`; export rootme
; \
600 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
601 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) all); \
606 # This rule is used to install the modules which use FLAGS_TO_PASS.
607 # To build a target install-X means to cd to X and make install.
608 .PHONY
: $(INSTALL_MODULES
)
609 $(INSTALL_MODULES
): install-dirs
610 @
dir=`echo $@ | sed -e 's/install-//'`; \
611 if
[ -f .
/$${dir}/Makefile
] ; then \
612 rootme
=`pwd`; export rootme
; \
613 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
614 (cd
$${dir}; $(MAKE
) $(FLAGS_TO_PASS
) install); \
619 # This rule is used the build the modules which use
620 # TARGET_FLAGS_TO_PASS. To build a target all-X means to cd to X and
622 .PHONY
: $(ALL_TARGET_MODULES
)
623 $(ALL_TARGET_MODULES
):
624 @
dir=`echo $@ | sed -e 's/all-//'`; \
625 if
[ -f .
/$${dir}/Makefile
] ; then \
626 rootme
=`pwd`; export rootme
; \
627 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
628 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) all); \
633 # This rule is used to install the modules which use
634 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
636 .PHONY
: $(INSTALL_TARGET_MODULES
)
637 $(INSTALL_TARGET_MODULES
): install-dirs
638 @
dir=`echo $@ | sed -e 's/install-//'`; \
639 if
[ -f .
/$${dir}/Makefile
] ; then \
640 rootme
=`pwd`; export rootme
; \
641 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
642 (cd
$${dir}; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) install); \
647 # This rule is used the build the modules which use X11_FLAGS_TO_PASS.
648 # To build a target all-X means to cd to X and make all.
649 .PHONY
: $(ALL_X11_MODULES
)
651 @
dir=`echo $@ | sed -e 's/all-//'`; \
652 if
[ -f .
/$${dir}/Makefile
] ; then \
653 rootme
=`pwd`; export rootme
; \
654 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
656 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) all); \
661 # This rule is used the install the modules which use X11_FLAGS_TO_PASS.
662 # To build a target install-X means to cd to X and make install.
663 .PHONY
: $(INSTALL_X11_MODULES
)
664 $(INSTALL_X11_MODULES
):
665 @
dir=`echo $@ | sed -e 's/all-//'`; \
666 if
[ -f .
/$${dir}/Makefile
] ; then \
667 rootme
=`pwd`; export rootme
; \
668 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
670 $(MAKE
) $(FLAGS_TO_PASS
) $(X11_FLAGS_TO_PASS
) install); \
675 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
678 @if
[ -f .
/gcc
/Makefile
] ; then \
679 rootme
=`pwd`; export rootme
; \
680 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
681 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) all); \
688 @if
[ -f .
/gcc
/Makefile
] ; then \
689 rootme
=`pwd`; export rootme
; \
690 srcroot
=`cd $(srcdir); pwd`; export srcroot
; \
691 (cd gcc
; $(MAKE
) $(GCC_FLAGS_TO_PASS
) install); \
696 # This is a list of inter-dependencies among modules.
699 all-binutils
: all-libiberty all-opcodes all-bfd all-flex
701 # start-sanitize-chill
702 all-chillrt
: all-binutils all-gas all-gcc all-newlib
706 all-diff
: all-libiberty
712 all-flex
: all-libiberty all-byacc
713 all-gas
: all-libiberty all-opcodes all-bfd
715 all-gcc
: all-libiberty all-byacc all-binutils all-gas
716 all-gdb
: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc
718 all-gprof
: all-libiberty all-bfd
720 all-gzip
: all-libiberty
721 all-hello
: all-libiberty
723 all-ispell
: all-emacs
724 all-ld
: all-libiberty all-bfd all-byacc all-flex
725 all-libg
++: all-gas all-ld all-gcc all-xiberty all-newlib
727 all-m4
: all-libiberty
728 all-make
: all-libiberty
730 all-newlib
: all-binutils all-gas all-gcc
736 all-recode
: all-libiberty
740 all-sim
: all-libiberty all-bfd
741 all-tar
: all-libiberty
743 all-tclX
: all-tcl all-tk
745 all-texinfo
: all-libiberty
747 all-tgas
: all-libiberty all-bfd
750 all-uudecode
: all-libiberty
751 all-xiberty
: all-gcc all-newlib
753 ### other supporting targets
762 @for i in
$(MAKEDIRS
) ; do \
763 echo Making
$$i...
; \
764 parent
=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
765 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
; \
766 if
[ ! -d
$$i ] ; then \
767 if mkdir
$$i ; then \
777 .PHONY
: install-info-dirs
779 if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; fi
780 -parent
=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
781 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
782 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; fi
784 dir.
info: do-install-info
785 if
[ -f
$(srcdir)/texinfo
/gen-info-dir
] ; then \
786 $(srcdir)/texinfo
/gen-info-dir
$(infodir) $(srcdir)/texinfo
/dir.info-template
> dir.
info.new
; \
787 mv
-f
dir.
info.new
dir.
info ; \
792 @echo
"Building a full distribution of this tree isn't done"
793 @echo
"via 'make dist'. Check out the etc/ subdirectory"
802 @for i in
$(SUBDIRS
); \
806 wd
=`basename $$pwd`; \
807 for j in
`$(MAKE) ls`; \
813 # with the gnu make, this is done automatically.
815 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
816 $(SHELL
) .
/config.status
819 # Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
821 DEVO_SUPPORT
= README Makefile.in configure configure.in \
822 config.guess config.sub config move-if-change
823 ETC_SUPPORT
= Makefile.in cfg-paper.texi configure.in configure.man \
825 GDB_SUPPORT_DIRS
= bfd
include libiberty mmalloc opcodes readline glob sim
826 GDB_SUPPORT_FILES
= $(GDB_SUPPORT_DIRS
)
828 .PHONY
: setup-dirs-gdb gdb.
tar.Z make-gdb.
tar.Z
833 chmod og
=u
`find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
835 gdb.
tar.Z
: setup-dirs-gdb
836 (cd gdb
; $(MAKE
) -f Makefile.in make-proto-gdb.
dir BISON
="byacc")
837 $(MAKE
) $(MFLAGS
) -f Makefile.in make-gdb.
tar.Z
839 make-gdb.
tar.Z
: $(DEVO_SUPPORT
) $(GDB_SUPPORT_DIRS
) gdb texinfo
/texinfo.
tex
840 rm -rf proto-toplev
; mkdir proto-toplev
841 ln
-s ..
/gdb
/proto-gdb.
dir proto-toplev
/gdb
842 (cd proto-toplev
; for i in
$(DEVO_SUPPORT
) $(GDB_SUPPORT_DIRS
); do \
845 mkdir proto-toplev
/etc
846 (cd proto-toplev
/etc
; for i in
$(ETC_SUPPORT
); do \
847 ln
-s ..
/..
/etc
/$$i .
; \
849 # Put only one copy (four hard links) of COPYING in the tar file.
850 rm proto-toplev
/bfd
/COPYING
851 ln proto-toplev
/gdb
/COPYING proto-toplev
/bfd
/COPYING
852 rm proto-toplev
/include/COPYING
853 ln proto-toplev
/gdb
/COPYING proto-toplev
/include/COPYING
854 rm proto-toplev
/readline
/COPYING
855 ln proto-toplev
/gdb
/COPYING proto-toplev
/readline
/COPYING
857 # Take out texinfo and glob from configurable dirs
858 rm proto-toplev
/configure.in
859 sed
-e
'/^host_tools=/s/texinfo //' \
860 -e
'/^host_libs=/s/glob //' \
861 <configure.in
>proto-toplev
/configure.in
863 # Take out texinfo from a few places; make simple BISON=bison line.
864 rm proto-toplev
/Makefile.in
865 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
866 -e
'/^ install-texinfo /d' \
867 -e
'/^BISON = /,/^$$/d' \
868 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
869 <Makefile.in
>proto-toplev
/Makefile.in
871 mkdir proto-toplev
/texinfo
872 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
873 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
874 chmod og
=u
`find proto-toplev -print`
875 (VER
=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
876 ln
-s proto-toplev gdb-
$$VER; \
877 echo
"==> Making gdb-$$VER.tar.Z"; \
878 tar cfh
- gdb-
$$VER |
$(COMPRESS
) -v
>gdb-
$$VER.
tar.Z
; \
879 echo
"==> Making gdb-$$VER.tar.z"; \
880 tar cfh
- gdb-
$$VER |
$(GZIP
) -v
-9 >gdb-
$$VER.
tar.z
)
882 # When you use `make setup-dirs' or `make taz' you should always redefine
884 SUPPORT_FILES
= list-of-support-files-for-tool-in-question
885 # Directories that might want `make proto-dir' run.
888 .PHONY
: setup-dirs taz
893 chmod og
=u
`find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) -print`
894 for d in ..
$(PROTODIRS
) ; do \
895 if
[ $$d != ".." ] && [ -d
$$d ]; then \
896 (cd
$$d ; $(MAKE
) -f Makefile.in proto-dir
) ; \
900 taz
: $(DEVO_SUPPORT
) $(SUPPORT_FILES
) texinfo
/texinfo.
tex
901 rm -rf proto-toplev
; mkdir proto-toplev
902 for d in ..
$(PROTODIRS
) ; do \
903 if
[ $$d != ..
]; then \
904 if
[ -d
$$d ]; then \
905 ln
-s ..
/$$d/proto-
$$d.
dir proto-toplev
/$$d ; \
909 (cd proto-toplev
; for i in
$(TOOL
) $(DEVO_SUPPORT
) $(SUPPORT_FILES
); do \
910 if
[ ! -d
$$i ]; then ln
-s ..
/$$i .
; else true
; fi
; \
912 mkdir proto-toplev
/etc
913 (cd proto-toplev
/etc
; for i in
$(ETC_SUPPORT
); do \
914 ln
-s ..
/..
/etc
/$$i .
; \
916 # Put only one copy (four hard links) of COPYING in the tar file.
919 # Take out texinfo and glob from configurable dirs
920 rm proto-toplev
/configure.in
921 sed
-e
'/^host_tools=/s/texinfo //' \
922 -e
'/^host_libs=/s/glob //' \
923 <configure.in
>proto-toplev
/configure.in
925 # Take out texinfo from a few places; make simple BISON=bison line.
926 rm proto-toplev
/Makefile.in
927 sed
-e
'/^all\.normal: /s/\all-texinfo //' \
928 -e
'/^ install-texinfo /d' \
929 -e
'/^BISON = /,/^$$/d' \
930 -e
'/^# BISON:/s/.*/BISON = bison -y/' \
931 <Makefile.in
>proto-toplev
/Makefile.in
933 mkdir proto-toplev
/texinfo
934 ln
-s ..
/..
/texinfo
/texinfo.
tex proto-toplev
/texinfo
/
935 ln
-s ..
/..
/texinfo
/tex3patch proto-toplev
/texinfo
/
936 chmod og
=u
`find proto-toplev -print`
937 (VER
=`sed <$(TOOL)/Makefile.in -n 's/VERSION *= *//p'`; \
938 echo
"==> Making $(TOOL)-$$VER.tar.z"; \
939 ln
-s proto-toplev
$(TOOL
)-$$VER; \
940 tar cfh
- $(TOOL
)-$$VER \
941 |
$(GZIP
) -v
>$(TOOL
)-$$VER.
tar.z
)
943 GAS_SUPPORT_DIRS
= bfd
include libiberty opcodes
946 gas.
tar.z
: $(DEVO_SUPPORT
) $(GAS_SUPPORT_DIRS
) gas texinfo
/texinfo.
tex
947 $(MAKE
) -f Makefile.in setup-dirs SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)"
948 $(MAKE
) -f Makefile.in taz SUPPORT_FILES
="$(GAS_SUPPORT_DIRS)" TOOL
=gas
954 # start-sanitize-chill
955 ## This is ugly, but I don't want GNU make to put these variables in
956 ## the environment. Older makes will see this as a set of targets
957 ## with no dependencies and no actions.
958 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
: