3 # Copyright (c) 2013, 2015-2017 ARM Limited
6 # The license below extends only to copyright in the software and shall
7 # not be construed as granting a license to any other intellectual
8 # property including but not limited to intellectual property relating
9 # to a hardware implementation of the functionality of the software
10 # licensed hereunder. You may use the software subject to the license
11 # terms below provided that you ensure that this notice is replicated
12 # unmodified and in its entirety in all distributions of the software,
13 # modified or unmodified, in source code or in binary form.
15 # Copyright (c) 2011 Advanced Micro Devices, Inc.
16 # Copyright (c) 2009 The Hewlett-Packard Development Company
17 # Copyright (c) 2004-2005 The Regents of The University of Michigan
18 # All rights reserved.
20 # Redistribution and use in source and binary forms, with or without
21 # modification, are permitted provided that the following conditions are
22 # met: redistributions of source code must retain the above copyright
23 # notice, this list of conditions and the following disclaimer;
24 # redistributions in binary form must reproduce the above copyright
25 # notice, this list of conditions and the following disclaimer in the
26 # documentation and/or other materials provided with the distribution;
27 # neither the name of the copyright holders nor the names of its
28 # contributors may be used to endorse or promote products derived from
29 # this software without specific prior written permission.
31 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 # Authors: Steve Reinhardt
46 ###################################################
48 # SCons top-level build description (SConstruct) file.
50 # While in this directory ('gem5'), just type 'scons' to build the default
51 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
52 # to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
53 # the optimized full-system version).
55 # You can build gem5 in a different directory as long as there is a
56 # 'build/<CONFIG>' somewhere along the target path. The build system
57 # expects that all configs under the same build directory are being
58 # built for the same host system.
62 # The following two commands are equivalent. The '-u' option tells
63 # scons to search up the directory tree for this SConstruct file.
64 # % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
65 # % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
67 # The following two commands are equivalent and demonstrate building
68 # in a directory outside of the source tree. The '-C' option tells
69 # scons to chdir to the specified directory to find this SConstruct
71 # % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
72 # % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
74 # You can use 'scons -H' to print scons options. If you're in this
75 # 'gem5' directory (or use -u or -C to tell scons where to find this
76 # file), you can use 'scons -h' to print all the gem5-specific build
79 ###################################################
81 # Global Python includes
89 from os
import mkdir
, environ
90 from os
.path
import abspath
, basename
, dirname
, expanduser
, normpath
91 from os
.path
import exists
, isdir
, isfile
92 from os
.path
import join
as joinpath
, split
as splitpath
98 from m5
.util
import compareVersions
, readCommand
109 # There's a bug in scons in that (1) by default, the help texts from
110 # AddOption() are supposed to be displayed when you type 'scons -h'
111 # and (2) you can override the help displayed by 'scons -h' using the
112 # Help() function, but these two features are incompatible: once
113 # you've overridden the help text using Help(), there's no way to get
114 # at the help texts from AddOptions. See:
115 # http://scons.tigris.org/issues/show_bug.cgi?id=2356
116 # http://scons.tigris.org/issues/show_bug.cgi?id=2611
117 # This hack lets us extract the help text from AddOptions and
118 # re-inject it via Help(). Ideally someday this bug will be fixed and
119 # we can just use AddOption directly.
120 def AddLocalOption(*args
, **kwargs
):
123 help = " " + ", ".join(args
)
126 if length
>= col_width
:
127 help += "\n" + " " * col_width
129 help += " " * (col_width
- length
)
130 help += kwargs
["help"]
131 help_texts
["options"] += help + "\n"
133 AddOption(*args
, **kwargs
)
135 AddLocalOption('--colors', dest
='use_colors', action
='store_true',
136 help="Add color to abbreviated scons output")
137 AddLocalOption('--no-colors', dest
='use_colors', action
='store_false',
138 help="Don't add color to abbreviated scons output")
139 AddLocalOption('--with-cxx-config', dest
='with_cxx_config',
141 help="Build with support for C++-based configuration")
142 AddLocalOption('--default', dest
='default', type='string', action
='store',
143 help='Override which build_opts file to use for defaults')
144 AddLocalOption('--ignore-style', dest
='ignore_style', action
='store_true',
145 help='Disable style checking hooks')
146 AddLocalOption('--no-lto', dest
='no_lto', action
='store_true',
147 help='Disable Link-Time Optimization for fast')
148 AddLocalOption('--force-lto', dest
='force_lto', action
='store_true',
149 help='Use Link-Time Optimization instead of partial linking' +
150 ' when the compiler doesn\'t support using them together.')
151 AddLocalOption('--update-ref', dest
='update_ref', action
='store_true',
152 help='Update test reference outputs')
153 AddLocalOption('--verbose', dest
='verbose', action
='store_true',
154 help='Print full tool command lines')
155 AddLocalOption('--without-python', dest
='without_python',
157 help='Build without Python configuration support')
158 AddLocalOption('--without-tcmalloc', dest
='without_tcmalloc',
160 help='Disable linking against tcmalloc')
161 AddLocalOption('--with-ubsan', dest
='with_ubsan', action
='store_true',
162 help='Build with Undefined Behavior Sanitizer if available')
163 AddLocalOption('--with-asan', dest
='with_asan', action
='store_true',
164 help='Build with Address Sanitizer if available')
166 if GetOption('no_lto') and GetOption('force_lto'):
167 print '--no-lto and --force-lto are mutually exclusive'
170 ########################################################################
172 # Set up the main build environment.
174 ########################################################################
178 from gem5_scons
import Transform
179 from gem5_scons
.util
import get_termcap
180 termcap
= get_termcap()
182 main_dict_keys
= main
.Dictionary().keys()
184 # Check that we have a C/C++ compiler
185 if not ('CC' in main_dict_keys
and 'CXX' in main_dict_keys
):
186 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)"
189 ###################################################
191 # Figure out which configurations to set up based on the path(s) of
194 ###################################################
196 # Find default configuration & binary.
197 Default(environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
199 # helper function: find last occurrence of element in list
200 def rfind(l
, elt
, offs
= -1):
201 for i
in range(len(l
)+offs
, 0, -1):
204 raise ValueError, "element not found"
206 # Take a list of paths (or SCons Nodes) and return a list with all
207 # paths made absolute and ~-expanded. Paths will be interpreted
208 # relative to the launch directory unless a different root is provided
209 def makePathListAbsolute(path_list
, root
=GetLaunchDir()):
210 return [abspath(joinpath(root
, expanduser(str(p
))))
213 # Each target must have 'build' in the interior of the path; the
214 # directory below this will determine the build parameters. For
215 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
216 # recognize that ALPHA_SE specifies the configuration because it
217 # follow 'build' in the build path.
219 # The funky assignment to "[:]" is needed to replace the list contents
220 # in place rather than reassign the symbol to a new list, which
221 # doesn't work (obviously!).
222 BUILD_TARGETS
[:] = makePathListAbsolute(BUILD_TARGETS
)
224 # Generate a list of the unique build roots and configs that the
225 # collected targets reference.
228 for t
in BUILD_TARGETS
:
229 path_dirs
= t
.split('/')
231 build_top
= rfind(path_dirs
, 'build', -2)
233 print "Error: no non-leaf 'build' dir found on target path", t
235 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
237 build_root
= this_build_root
239 if this_build_root
!= build_root
:
240 print "Error: build targets not under same build root\n"\
241 " %s\n %s" % (build_root
, this_build_root
)
243 variant_path
= joinpath('/',*path_dirs
[:build_top
+2])
244 if variant_path
not in variant_paths
:
245 variant_paths
.append(variant_path
)
247 # Make sure build_root exists (might not if this is the first build there)
248 if not isdir(build_root
):
250 main
['BUILDROOT'] = build_root
254 main
.SConsignFile(joinpath(build_root
, "sconsign"))
256 # Default duplicate option is to use hard links, but this messes up
257 # when you use emacs to edit a file in the target dir, as emacs moves
258 # file to file~ then copies to file, breaking the link. Symbolic
259 # (soft) links work better.
260 main
.SetOption('duplicate', 'soft-copy')
263 # Set up global sticky variables... these are common to an entire build
264 # tree (not specific to a particular build like ALPHA_SE)
267 global_vars_file
= joinpath(build_root
, 'variables.global')
269 global_vars
= Variables(global_vars_file
, args
=ARGUMENTS
)
271 global_vars
.AddVariables(
272 ('CC', 'C compiler', environ
.get('CC', main
['CC'])),
273 ('CXX', 'C++ compiler', environ
.get('CXX', main
['CXX'])),
274 ('PROTOC', 'protoc tool', environ
.get('PROTOC', 'protoc')),
275 ('BATCH', 'Use batch pool for build and tests', False),
276 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
277 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
278 ('EXTRAS', 'Add extra directories to the compilation', '')
281 # Update main environment with values from ARGUMENTS & global_vars_file
282 global_vars
.Update(main
)
283 help_texts
["global_vars"] += global_vars
.GenerateHelpText(main
)
285 # Save sticky variable settings back to current variables file
286 global_vars
.Save(global_vars_file
, main
)
288 # Parse EXTRAS variable to build list of all directories where we're
289 # look for sources etc. This list is exported as extras_dir_list.
290 base_dir
= main
.srcdir
.abspath
292 extras_dir_list
= makePathListAbsolute(main
['EXTRAS'].split(':'))
297 Export('extras_dir_list')
299 # the ext directory should be on the #includes path
300 main
.Append(CPPPATH
=[Dir('ext')])
302 # Add shared top-level headers
303 main
.Prepend(CPPPATH
=Dir('include'))
305 if GetOption('verbose'):
306 def MakeAction(action
, string
, *args
, **kwargs
):
307 return Action(action
, *args
, **kwargs
)
310 main
['CCCOMSTR'] = Transform("CC")
311 main
['CXXCOMSTR'] = Transform("CXX")
312 main
['ASCOMSTR'] = Transform("AS")
313 main
['ARCOMSTR'] = Transform("AR", 0)
314 main
['LINKCOMSTR'] = Transform("LINK", 0)
315 main
['SHLINKCOMSTR'] = Transform("SHLINK", 0)
316 main
['RANLIBCOMSTR'] = Transform("RANLIB", 0)
317 main
['M4COMSTR'] = Transform("M4")
318 main
['SHCCCOMSTR'] = Transform("SHCC")
319 main
['SHCXXCOMSTR'] = Transform("SHCXX")
322 # Initialize the Link-Time Optimization (LTO) flags
323 main
['LTO_CCFLAGS'] = []
324 main
['LTO_LDFLAGS'] = []
326 # According to the readme, tcmalloc works best if the compiler doesn't
327 # assume that we're using the builtin malloc and friends. These flags
328 # are compiler-specific, so we need to set them after we detect which
329 # compiler we're using.
330 main
['TCMALLOC_CCFLAGS'] = []
332 CXX_version
= readCommand([main
['CXX'],'--version'], exception
=False)
333 CXX_V
= readCommand([main
['CXX'],'-V'], exception
=False)
335 main
['GCC'] = CXX_version
and CXX_version
.find('g++') >= 0
336 main
['CLANG'] = CXX_version
and CXX_version
.find('clang') >= 0
337 if main
['GCC'] + main
['CLANG'] > 1:
338 print 'Error: How can we have two at the same time?'
341 # Set up default C++ compiler flags
342 if main
['GCC'] or main
['CLANG']:
343 # As gcc and clang share many flags, do the common parts here
344 main
.Append(CCFLAGS
=['-pipe'])
345 main
.Append(CCFLAGS
=['-fno-strict-aliasing'])
346 # Enable -Wall and -Wextra and then disable the few warnings that
347 # we consistently violate
348 main
.Append(CCFLAGS
=['-Wall', '-Wundef', '-Wextra',
349 '-Wno-sign-compare', '-Wno-unused-parameter'])
350 # We always compile using C++11
351 main
.Append(CXXFLAGS
=['-std=c++11'])
352 if sys
.platform
.startswith('freebsd'):
353 main
.Append(CCFLAGS
=['-I/usr/local/include'])
354 main
.Append(CXXFLAGS
=['-I/usr/local/include'])
356 main
['FILTER_PSHLINKFLAGS'] = lambda x
: str(x
).replace(' -shared', '')
357 main
['PSHLINKFLAGS'] = main
.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}')
358 main
['PLINKFLAGS'] = main
.subst('${LINKFLAGS}')
359 shared_partial_flags
= ['-r', '-nostdlib']
360 main
.Append(PSHLINKFLAGS
=shared_partial_flags
)
361 main
.Append(PLINKFLAGS
=shared_partial_flags
)
363 # Treat warnings as errors but white list some warnings that we
364 # want to allow (e.g., deprecation warnings).
365 main
.Append(CCFLAGS
=['-Werror',
366 '-Wno-error=deprecated-declarations',
367 '-Wno-error=deprecated',
370 print termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
,
371 print "Don't know what compiler options to use for your compiler."
372 print termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX']
373 print termcap
.Yellow
+ ' version:' + termcap
.Normal
,
375 print termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +\
378 print CXX_version
.replace('\n', '<nl>')
379 print " If you're trying to use a compiler other than GCC"
380 print " or clang, there appears to be something wrong with your"
381 print " environment."
383 print " If you are trying to use a compiler other than those listed"
384 print " above you will need to ease fix SConstruct and "
385 print " src/SConscript to support that compiler."
389 # Check for a supported version of gcc. >= 4.8 is chosen for its
390 # level of c++11 support. See
391 # http://gcc.gnu.org/projects/cxx0x.html for details.
392 gcc_version
= readCommand([main
['CXX'], '-dumpversion'], exception
=False)
393 if compareVersions(gcc_version
, "4.8") < 0:
394 print 'Error: gcc version 4.8 or newer required.'
395 print ' Installed version:', gcc_version
398 main
['GCC_VERSION'] = gcc_version
400 if compareVersions(gcc_version
, '4.9') >= 0:
401 # Incremental linking with LTO is currently broken in gcc versions
402 # 4.9 and above. A version where everything works completely hasn't
403 # yet been identified.
405 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548
406 main
['BROKEN_INCREMENTAL_LTO'] = True
407 if compareVersions(gcc_version
, '6.0') >= 0:
408 # gcc versions 6.0 and greater accept an -flinker-output flag which
409 # selects what type of output the linker should generate. This is
410 # necessary for incremental lto to work, but is also broken in
411 # current versions of gcc. It may not be necessary in future
412 # versions. We add it here since it might be, and as a reminder that
413 # it exists. It's excluded if lto is being forced.
415 # https://gcc.gnu.org/gcc-6/changes.html
416 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html
417 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866
418 if not GetOption('force_lto'):
419 main
.Append(PSHLINKFLAGS
='-flinker-output=rel')
420 main
.Append(PLINKFLAGS
='-flinker-output=rel')
422 # gcc from version 4.8 and above generates "rep; ret" instructions
423 # to avoid performance penalties on certain AMD chips. Older
424 # assemblers detect this as an error, "Error: expecting string
425 # instruction after `rep'"
426 as_version_raw
= readCommand([main
['AS'], '-v', '/dev/null',
428 exception
=False).split()
430 # version strings may contain extra distro-specific
431 # qualifiers, so play it safe and keep only what comes before
433 as_version
= as_version_raw
[-1].split('-')[0] if as_version_raw
else None
435 if not as_version
or compareVersions(as_version
, "2.23") < 0:
436 print termcap
.Yellow
+ termcap
.Bold
+ \
437 'Warning: This combination of gcc and binutils have' + \
438 ' known incompatibilities.\n' + \
439 ' If you encounter build problems, please update ' + \
440 'binutils to 2.23.' + \
443 # Make sure we warn if the user has requested to compile with the
444 # Undefined Benahvior Sanitizer and this version of gcc does not
446 if GetOption('with_ubsan') and \
447 compareVersions(gcc_version
, '4.9') < 0:
448 print termcap
.Yellow
+ termcap
.Bold
+ \
449 'Warning: UBSan is only supported using gcc 4.9 and later.' + \
452 disable_lto
= GetOption('no_lto')
453 if not disable_lto
and main
.get('BROKEN_INCREMENTAL_LTO', False) and \
454 not GetOption('force_lto'):
455 print termcap
.Yellow
+ termcap
.Bold
+ \
456 'Warning: Your compiler doesn\'t support incremental linking' + \
457 ' and lto at the same time, so lto is being disabled. To force' + \
458 ' lto on anyway, use the --force-lto option. That will disable' + \
459 ' partial linking.' + \
463 # Add the appropriate Link-Time Optimization (LTO) flags
464 # unless LTO is explicitly turned off. Note that these flags
465 # are only used by the fast target.
467 # Pass the LTO flag when compiling to produce GIMPLE
468 # output, we merely create the flags here and only append
470 main
['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
472 # Use the same amount of jobs for LTO as we are running
474 main
['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
476 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin-malloc', '-fno-builtin-calloc',
477 '-fno-builtin-realloc', '-fno-builtin-free'])
479 # add option to check for undeclared overrides
480 if compareVersions(gcc_version
, "5.0") > 0:
481 main
.Append(CCFLAGS
=['-Wno-error=suggest-override'])
483 # The address sanitizer is available for gcc >= 4.8
484 if GetOption('with_asan'):
485 if GetOption('with_ubsan') and \
486 compareVersions(env
['GCC_VERSION'], '4.9') >= 0:
487 env
.Append(CCFLAGS
=['-fsanitize=address,undefined',
488 '-fno-omit-frame-pointer'],
489 LINKFLAGS
='-fsanitize=address,undefined')
491 env
.Append(CCFLAGS
=['-fsanitize=address',
492 '-fno-omit-frame-pointer'],
493 LINKFLAGS
='-fsanitize=address')
494 # Only gcc >= 4.9 supports UBSan, so check both the version
495 # and the command-line option before adding the compiler and
497 elif GetOption('with_ubsan') and \
498 compareVersions(env
['GCC_VERSION'], '4.9') >= 0:
499 env
.Append(CCFLAGS
='-fsanitize=undefined')
500 env
.Append(LINKFLAGS
='-fsanitize=undefined')
503 # Check for a supported version of clang, >= 3.1 is needed to
504 # support similar features as gcc 4.8. See
505 # http://clang.llvm.org/cxx_status.html for details
506 clang_version_re
= re
.compile(".* version (\d+\.\d+)")
507 clang_version_match
= clang_version_re
.search(CXX_version
)
508 if (clang_version_match
):
509 clang_version
= clang_version_match
.groups()[0]
510 if compareVersions(clang_version
, "3.1") < 0:
511 print 'Error: clang version 3.1 or newer required.'
512 print ' Installed version:', clang_version
515 print 'Error: Unable to determine clang version.'
518 # clang has a few additional warnings that we disable, extraneous
519 # parantheses are allowed due to Ruby's printing of the AST,
520 # finally self assignments are allowed as the generated CPU code
522 main
.Append(CCFLAGS
=['-Wno-parentheses',
524 # Some versions of libstdc++ (4.8?) seem to
525 # use struct hash and class hash
527 '-Wno-mismatched-tags',
530 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin'])
532 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
533 # opposed to libstdc++, as the later is dated.
534 if sys
.platform
== "darwin":
535 main
.Append(CXXFLAGS
=['-stdlib=libc++'])
536 main
.Append(LIBS
=['c++'])
538 # On FreeBSD we need libthr.
539 if sys
.platform
.startswith('freebsd'):
540 main
.Append(LIBS
=['thr'])
542 # We require clang >= 3.1, so there is no need to check any
544 if GetOption('with_ubsan'):
545 if GetOption('with_asan'):
546 env
.Append(CCFLAGS
=['-fsanitize=address,undefined',
547 '-fno-omit-frame-pointer'],
548 LINKFLAGS
='-fsanitize=address,undefined')
550 env
.Append(CCFLAGS
='-fsanitize=undefined',
551 LINKFLAGS
='-fsanitize=undefined')
553 elif GetOption('with_asan'):
554 env
.Append(CCFLAGS
=['-fsanitize=address',
555 '-fno-omit-frame-pointer'],
556 LINKFLAGS
='-fsanitize=address')
559 print termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
,
560 print "Don't know what compiler options to use for your compiler."
561 print termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX']
562 print termcap
.Yellow
+ ' version:' + termcap
.Normal
,
564 print termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +\
567 print CXX_version
.replace('\n', '<nl>')
568 print " If you're trying to use a compiler other than GCC"
569 print " or clang, there appears to be something wrong with your"
570 print " environment."
572 print " If you are trying to use a compiler other than those listed"
573 print " above you will need to ease fix SConstruct and "
574 print " src/SConscript to support that compiler."
577 # Set up common yacc/bison flags (needed for Ruby)
578 main
['YACCFLAGS'] = '-d'
579 main
['YACCHXXFILESUFFIX'] = '.hh'
581 # Do this after we save setting back, or else we'll tack on an
582 # extra 'qdo' every time we run scons.
584 main
['CC'] = main
['BATCH_CMD'] + ' ' + main
['CC']
585 main
['CXX'] = main
['BATCH_CMD'] + ' ' + main
['CXX']
586 main
['AS'] = main
['BATCH_CMD'] + ' ' + main
['AS']
587 main
['AR'] = main
['BATCH_CMD'] + ' ' + main
['AR']
588 main
['RANLIB'] = main
['BATCH_CMD'] + ' ' + main
['RANLIB']
590 if sys
.platform
== 'cygwin':
591 # cygwin has some header file issues...
592 main
.Append(CCFLAGS
=["-Wno-uninitialized"])
594 # Check for the protobuf compiler
595 protoc_version
= readCommand([main
['PROTOC'], '--version'],
596 exception
='').split()
598 # First two words should be "libprotoc x.y.z"
599 if len(protoc_version
) < 2 or protoc_version
[0] != 'libprotoc':
600 print termcap
.Yellow
+ termcap
.Bold
+ \
601 'Warning: Protocol buffer compiler (protoc) not found.\n' + \
602 ' Please install protobuf-compiler for tracing support.' + \
604 main
['PROTOC'] = False
606 # Based on the availability of the compress stream wrappers,
608 min_protoc_version
= '2.1.0'
609 if compareVersions(protoc_version
[1], min_protoc_version
) < 0:
610 print termcap
.Yellow
+ termcap
.Bold
+ \
611 'Warning: protoc version', min_protoc_version
, \
612 'or newer required.\n' + \
613 ' Installed version:', protoc_version
[1], \
615 main
['PROTOC'] = False
617 # Attempt to determine the appropriate include path and
618 # library path using pkg-config, that means we also need to
619 # check for pkg-config. Note that it is possible to use
620 # protobuf without the involvement of pkg-config. Later on we
621 # check go a library config check and at that point the test
622 # will fail if libprotobuf cannot be found.
623 if readCommand(['pkg-config', '--version'], exception
=''):
625 # Attempt to establish what linking flags to add for protobuf
627 main
.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
629 print termcap
.Yellow
+ termcap
.Bold
+ \
630 'Warning: pkg-config could not get protobuf flags.' + \
634 # Check for 'timeout' from GNU coreutils. If present, regressions will
635 # be run with a time limit. We require version 8.13 since we rely on
636 # support for the '--foreground' option.
637 if sys
.platform
.startswith('freebsd'):
638 timeout_lines
= readCommand(['gtimeout', '--version'],
639 exception
='').splitlines()
641 timeout_lines
= readCommand(['timeout', '--version'],
642 exception
='').splitlines()
643 # Get the first line and tokenize it
644 timeout_version
= timeout_lines
[0].split() if timeout_lines
else []
645 main
['TIMEOUT'] = timeout_version
and \
646 compareVersions(timeout_version
[-1], '8.13') >= 0
648 # Add a custom Check function to test for structure members.
649 def CheckMember(context
, include
, decl
, member
, include_quotes
="<>"):
650 context
.Message("Checking for member %s in %s..." %
656 (void)test.%(member)s;
659 """ % { "header" : include_quotes
[0] + include
+ include_quotes
[1],
664 ret
= context
.TryCompile(text
, extension
=".cc")
668 # Platform-specific configuration. Note again that we assume that all
669 # builds under a given build root run on the same host platform.
670 conf
= Configure(main
,
671 conf_dir
= joinpath(build_root
, '.scons_config'),
672 log_file
= joinpath(build_root
, 'scons_config.log'),
674 'CheckMember' : CheckMember
,
677 # Check if we should compile a 64 bit binary on Mac OS X/Darwin
680 uname
= platform
.uname()
681 if uname
[0] == 'Darwin' and compareVersions(uname
[2], '9.0.0') >= 0:
682 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
683 main
.Append(CCFLAGS
=['-arch', 'x86_64'])
684 main
.Append(CFLAGS
=['-arch', 'x86_64'])
685 main
.Append(LINKFLAGS
=['-arch', 'x86_64'])
686 main
.Append(ASFLAGS
=['-arch', 'x86_64'])
690 # Recent versions of scons substitute a "Null" object for Configure()
691 # when configuration isn't necessary, e.g., if the "--help" option is
692 # present. Unfortuantely this Null object always returns false,
693 # breaking all our configuration checks. We replace it with our own
694 # more optimistic null object that returns True instead.
696 def NullCheck(*args
, **kwargs
):
700 def __init__(self
, env
):
704 def __getattr__(self
, mname
):
707 conf
= NullConf(main
)
709 # Cache build files in the supplied directory.
710 if main
['M5_BUILD_CACHE']:
711 print 'Using build cache located at', main
['M5_BUILD_CACHE']
712 CacheDir(main
['M5_BUILD_CACHE'])
714 main
['USE_PYTHON'] = not GetOption('without_python')
715 if main
['USE_PYTHON']:
716 # Find Python include and library directories for embedding the
717 # interpreter. We rely on python-config to resolve the appropriate
718 # includes and linker flags. ParseConfig does not seem to understand
719 # the more exotic linker flags such as -Xlinker and -export-dynamic so
720 # we add them explicitly below. If you want to link in an alternate
721 # version of python, see above for instructions on how to invoke
722 # scons with the appropriate PATH set.
724 # First we check if python2-config exists, else we use python-config
725 python_config
= readCommand(['which', 'python2-config'],
726 exception
='').strip()
727 if not os
.path
.exists(python_config
):
728 python_config
= readCommand(['which', 'python-config'],
729 exception
='').strip()
730 py_includes
= readCommand([python_config
, '--includes'],
731 exception
='').split()
732 # Strip the -I from the include folders before adding them to the
734 main
.Append(CPPPATH
=map(lambda inc
: inc
[2:], py_includes
))
736 # Read the linker flags and split them into libraries and other link
737 # flags. The libraries are added later through the call the CheckLib.
738 py_ld_flags
= readCommand([python_config
, '--ldflags'],
739 exception
='').split()
741 for lib
in py_ld_flags
:
742 if not lib
.startswith('-l'):
743 main
.Append(LINKFLAGS
=[lib
])
746 if lib
not in py_libs
:
749 # verify that this stuff works
750 if not conf
.CheckHeader('Python.h', '<>'):
751 print "Error: can't find Python.h header in", py_includes
752 print "Install Python headers (package python-dev on Ubuntu and RedHat)"
756 if not conf
.CheckLib(lib
):
757 print "Error: can't find library %s required by python" % lib
760 # On Solaris you need to use libsocket for socket ops
761 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
762 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
763 print "Can't find library with socket calls (e.g. accept())"
766 # Check for zlib. If the check passes, libz will be automatically
767 # added to the LIBS environment variable.
768 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
769 print 'Error: did not find needed zlib compression library '\
770 'and/or zlib.h header file.'
771 print ' Please install zlib and try again.'
774 # If we have the protobuf compiler, also make sure we have the
775 # development libraries. If the check passes, libprotobuf will be
776 # automatically added to the LIBS environment variable. After
777 # this, we can use the HAVE_PROTOBUF flag to determine if we have
778 # got both protoc and libprotobuf available.
779 main
['HAVE_PROTOBUF'] = main
['PROTOC'] and \
780 conf
.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
781 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
783 # If we have the compiler but not the library, print another warning.
784 if main
['PROTOC'] and not main
['HAVE_PROTOBUF']:
785 print termcap
.Yellow
+ termcap
.Bold
+ \
786 'Warning: did not find protocol buffer library and/or headers.\n' + \
787 ' Please install libprotobuf-dev for tracing support.' + \
792 conf
.CheckLibWithHeader(None, 'time.h', 'C',
793 'clock_nanosleep(0,0,NULL,NULL);') or \
794 conf
.CheckLibWithHeader('rt', 'time.h', 'C',
795 'clock_nanosleep(0,0,NULL,NULL);')
797 have_posix_timers
= \
798 conf
.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C',
799 'timer_create(CLOCK_MONOTONIC, NULL, NULL);')
801 if not GetOption('without_tcmalloc'):
802 if conf
.CheckLib('tcmalloc'):
803 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
804 elif conf
.CheckLib('tcmalloc_minimal'):
805 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
807 print termcap
.Yellow
+ termcap
.Bold
+ \
808 "You can get a 12% performance improvement by "\
809 "installing tcmalloc (libgoogle-perftools-dev package "\
810 "on Ubuntu or RedHat)." + termcap
.Normal
813 # Detect back trace implementations. The last implementation in the
814 # list will be used by default.
815 backtrace_impls
= [ "none" ]
817 if conf
.CheckLibWithHeader(None, 'execinfo.h', 'C',
818 'backtrace_symbols_fd((void*)0, 0, 0);'):
819 backtrace_impls
.append("glibc")
820 elif conf
.CheckLibWithHeader('execinfo', 'execinfo.h', 'C',
821 'backtrace_symbols_fd((void*)0, 0, 0);'):
822 # NetBSD and FreeBSD need libexecinfo.
823 backtrace_impls
.append("glibc")
824 main
.Append(LIBS
=['execinfo'])
826 if backtrace_impls
[-1] == "none":
827 default_backtrace_impl
= "none"
828 print termcap
.Yellow
+ termcap
.Bold
+ \
829 "No suitable back trace implementation found." + \
832 if not have_posix_clock
:
833 print "Can't find library for POSIX clocks."
835 # Check for <fenv.h> (C99 FP environment control)
836 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
838 print "Warning: Header file <fenv.h> not found."
839 print " This host has no IEEE FP rounding mode control."
841 # Check for <png.h> (libpng library needed if wanting to dump
842 # frame buffer image in png format)
843 have_png
= conf
.CheckHeader('png.h', '<>')
845 print "Warning: Header file <png.h> not found."
846 print " This host has no libpng library."
847 print " Disabling support for PNG framebuffers."
849 # Check if we should enable KVM-based hardware virtualization. The API
850 # we rely on exists since version 2.6.36 of the kernel, but somehow
851 # the KVM_API_VERSION does not reflect the change. We test for one of
852 # the types as a fall back.
853 have_kvm
= conf
.CheckHeader('linux/kvm.h', '<>')
855 print "Info: Compatible header file <linux/kvm.h> not found, " \
856 "disabling KVM support."
858 # Check if the TUN/TAP driver is available.
859 have_tuntap
= conf
.CheckHeader('linux/if_tun.h', '<>')
861 print "Info: Compatible header file <linux/if_tun.h> not found."
863 # x86 needs support for xsave. We test for the structure here since we
864 # won't be able to run new tests by the time we know which ISA we're
866 have_kvm_xsave
= conf
.CheckTypeSize('struct kvm_xsave',
867 '#include <linux/kvm.h>') != 0
869 # Check if the requested target ISA is compatible with the host
870 def is_isa_kvm_compatible(isa
):
873 host_isa
= platform
.machine()
875 print "Warning: Failed to determine host ISA."
878 if not have_posix_timers
:
879 print "Warning: Can not enable KVM, host seems to lack support " \
884 return host_isa
in ( "armv7l", "aarch64" )
886 if host_isa
!= "x86_64":
889 if not have_kvm_xsave
:
890 print "KVM on x86 requires xsave support in kernel headers."
898 # Check if the exclude_host attribute is available. We want this to
899 # get accurate instruction counts in KVM.
900 main
['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf
.CheckMember(
901 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host')
904 ######################################################################
906 # Finish the configuration
910 ######################################################################
912 # Collect all non-global variables
915 # Define the universe of supported ISAs
917 all_gpu_isa_list
= [ ]
918 Export('all_isa_list')
919 Export('all_gpu_isa_list')
921 class CpuModel(object):
922 '''The CpuModel class encapsulates everything the ISA parser needs to
923 know about a particular CPU model.'''
925 # Dict of available CPU model objects. Accessible as CpuModel.dict.
928 # Constructor. Automatically adds models to CpuModel.dict.
929 def __init__(self
, name
, default
=False):
930 self
.name
= name
# name of model
932 # This cpu is enabled by default
933 self
.default
= default
936 if name
in CpuModel
.dict:
937 raise AttributeError, "CpuModel '%s' already registered" % name
938 CpuModel
.dict[name
] = self
942 # Sticky variables get saved in the variables file so they persist from
943 # one invocation to the next (unless overridden, in which case the new
944 # value becomes sticky).
945 sticky_vars
= Variables(args
=ARGUMENTS
)
946 Export('sticky_vars')
948 # Sticky variables that should be exported
950 Export('export_vars')
954 Export('all_protocols')
956 Export('protocol_dirs')
958 Export('slicc_includes')
960 # Walk the tree and execute all SConsopts scripts that wil add to the
962 if GetOption('verbose'):
963 print "Reading SConsopts"
964 for bdir
in [ base_dir
] + extras_dir_list
:
966 print "Error: directory '%s' does not exist" % bdir
968 for root
, dirs
, files
in os
.walk(bdir
):
969 if 'SConsopts' in files
:
970 if GetOption('verbose'):
971 print "Reading", joinpath(root
, 'SConsopts')
972 SConscript(joinpath(root
, 'SConsopts'))
975 all_gpu_isa_list
.sort()
977 sticky_vars
.AddVariables(
978 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list
),
979 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list
),
980 ListVariable('CPU_MODELS', 'CPU models',
981 sorted(n
for n
,m
in CpuModel
.dict.iteritems() if m
.default
),
982 sorted(CpuModel
.dict.keys())),
983 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
985 BoolVariable('SS_COMPATIBLE_FP',
986 'Make floating-point results compatible with SimpleScalar',
988 BoolVariable('USE_SSE2',
989 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
991 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock
),
992 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
993 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png
),
994 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability',
996 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models',
998 BoolVariable('USE_TUNTAP',
999 'Enable using a tap device to bridge to the host network',
1001 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False),
1002 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
1004 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation',
1005 backtrace_impls
[-1], backtrace_impls
)
1008 # These variables get exported to #defines in config/*.hh (see src/SConscript).
1009 export_vars
+= ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA',
1010 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP',
1011 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST',
1014 ###################################################
1016 # Define a SCons builder for configuration flag headers.
1018 ###################################################
1020 # This function generates a config header file that #defines the
1021 # variable symbol to the current variable setting (0 or 1). The source
1022 # operands are the name of the variable and a Value node containing the
1023 # value of the variable.
1024 def build_config_file(target
, source
, env
):
1025 (variable
, value
) = [s
.get_contents() for s
in source
]
1026 f
= file(str(target
[0]), 'w')
1027 print >> f
, '#define', variable
, value
1031 # Combine the two functions into a scons Action object.
1032 config_action
= MakeAction(build_config_file
, Transform("CONFIG H", 2))
1034 # The emitter munges the source & target node lists to reflect what
1035 # we're really doing.
1036 def config_emitter(target
, source
, env
):
1037 # extract variable name from Builder arg
1038 variable
= str(target
[0])
1039 # True target is config header file
1040 target
= joinpath('config', variable
.lower() + '.hh')
1042 if isinstance(val
, bool):
1043 # Force value to 0/1
1045 elif isinstance(val
, str):
1046 val
= '"' + val
+ '"'
1048 # Sources are variable name & value (packaged in SCons Value nodes)
1049 return ([target
], [Value(variable
), Value(val
)])
1051 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
1053 main
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
1055 ###################################################
1057 # Builders for static and shared partially linked object files.
1059 ###################################################
1061 partial_static_builder
= Builder(action
=SCons
.Defaults
.LinkAction
,
1062 src_suffix
='$OBJSUFFIX',
1063 src_builder
=['StaticObject', 'Object'],
1064 LINKFLAGS
='$PLINKFLAGS',
1067 def partial_shared_emitter(target
, source
, env
):
1069 tgt
.attributes
.shared
= 1
1070 return (target
, source
)
1071 partial_shared_builder
= Builder(action
=SCons
.Defaults
.ShLinkAction
,
1072 emitter
=partial_shared_emitter
,
1073 src_suffix
='$SHOBJSUFFIX',
1074 src_builder
='SharedObject',
1075 SHLINKFLAGS
='$PSHLINKFLAGS',
1078 main
.Append(BUILDERS
= { 'PartialShared' : partial_shared_builder
,
1079 'PartialStatic' : partial_static_builder
})
1081 # builds in ext are shared across all configs in the build root.
1082 ext_dir
= abspath(joinpath(str(main
.root
), 'ext'))
1084 for root
, dirs
, files
in os
.walk(ext_dir
):
1085 if 'SConscript' in files
:
1086 build_dir
= os
.path
.relpath(root
, ext_dir
)
1087 ext_build_dirs
.append(build_dir
)
1088 main
.SConscript(joinpath(root
, 'SConscript'),
1089 variant_dir
=joinpath(build_root
, build_dir
))
1091 main
.Prepend(CPPPATH
=Dir('ext/pybind11/include/'))
1093 ###################################################
1095 # This builder and wrapper method are used to set up a directory with
1096 # switching headers. Those are headers which are in a generic location and
1097 # that include more specific headers from a directory chosen at build time
1098 # based on the current build settings.
1100 ###################################################
1102 def build_switching_header(target
, source
, env
):
1103 path
= str(target
[0])
1104 subdir
= str(source
[0])
1105 dp
, fp
= os
.path
.split(path
)
1106 dp
= os
.path
.relpath(os
.path
.realpath(dp
),
1107 os
.path
.realpath(env
['BUILDDIR']))
1108 with
open(path
, 'w') as hdr
:
1109 print >>hdr
, '#include "%s/%s/%s"' % (dp
, subdir
, fp
)
1111 switching_header_action
= MakeAction(build_switching_header
,
1112 Transform('GENERATE'))
1114 switching_header_builder
= Builder(action
=switching_header_action
,
1115 source_factory
=Value
,
1118 main
.Append(BUILDERS
= { 'SwitchingHeader': switching_header_builder
})
1120 def switching_headers(self
, headers
, source
):
1121 for header
in headers
:
1122 self
.SwitchingHeader(header
, source
)
1124 main
.AddMethod(switching_headers
, 'SwitchingHeaders')
1126 ###################################################
1128 # Define build environments for selected configurations.
1130 ###################################################
1132 for variant_path
in variant_paths
:
1133 if not GetOption('silent'):
1134 print "Building in", variant_path
1136 # Make a copy of the build-root environment to use for this config.
1138 env
['BUILDDIR'] = variant_path
1140 # variant_dir is the tail component of build path, and is used to
1141 # determine the build parameters (e.g., 'ALPHA_SE')
1142 (build_root
, variant_dir
) = splitpath(variant_path
)
1144 # Set env variables according to the build directory config.
1145 sticky_vars
.files
= []
1146 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1147 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1148 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1149 current_vars_file
= joinpath(build_root
, 'variables', variant_dir
)
1150 if isfile(current_vars_file
):
1151 sticky_vars
.files
.append(current_vars_file
)
1152 if not GetOption('silent'):
1153 print "Using saved variables file %s" % current_vars_file
1154 elif variant_dir
in ext_build_dirs
:
1155 # Things in ext are built without a variant directory.
1158 # Build dir-specific variables file doesn't exist.
1160 # Make sure the directory is there so we can create it later
1161 opt_dir
= dirname(current_vars_file
)
1162 if not isdir(opt_dir
):
1165 # Get default build variables from source tree. Variables are
1166 # normally determined by name of $VARIANT_DIR, but can be
1167 # overridden by '--default=' arg on command line.
1168 default
= GetOption('default')
1169 opts_dir
= joinpath(main
.root
.abspath
, 'build_opts')
1171 default_vars_files
= [joinpath(build_root
, 'variables', default
),
1172 joinpath(opts_dir
, default
)]
1174 default_vars_files
= [joinpath(opts_dir
, variant_dir
)]
1175 existing_files
= filter(isfile
, default_vars_files
)
1177 default_vars_file
= existing_files
[0]
1178 sticky_vars
.files
.append(default_vars_file
)
1179 print "Variables file %s not found,\n using defaults in %s" \
1180 % (current_vars_file
, default_vars_file
)
1182 print "Error: cannot find variables file %s or " \
1183 "default file(s) %s" \
1184 % (current_vars_file
, ' or '.join(default_vars_files
))
1187 # Apply current variable settings to env
1188 sticky_vars
.Update(env
)
1190 help_texts
["local_vars"] += \
1191 "Build variables for %s:\n" % variant_dir \
1192 + sticky_vars
.GenerateHelpText(env
)
1194 # Process variable settings.
1196 if not have_fenv
and env
['USE_FENV']:
1197 print "Warning: <fenv.h> not available; " \
1198 "forcing USE_FENV to False in", variant_dir
+ "."
1199 env
['USE_FENV'] = False
1201 if not env
['USE_FENV']:
1202 print "Warning: No IEEE FP rounding mode control in", variant_dir
+ "."
1203 print " FP results may deviate slightly from other platforms."
1205 if not have_png
and env
['USE_PNG']:
1206 print "Warning: <png.h> not available; " \
1207 "forcing USE_PNG to False in", variant_dir
+ "."
1208 env
['USE_PNG'] = False
1211 env
.Append(LIBS
=['png'])
1214 env
.Append(LIBS
=['efence'])
1218 print "Warning: Can not enable KVM, host seems to lack KVM support"
1219 env
['USE_KVM'] = False
1220 elif not is_isa_kvm_compatible(env
['TARGET_ISA']):
1221 print "Info: KVM support disabled due to unsupported host and " \
1222 "target ISA combination"
1223 env
['USE_KVM'] = False
1225 if env
['USE_TUNTAP']:
1227 print "Warning: Can't connect EtherTap with a tap device."
1228 env
['USE_TUNTAP'] = False
1230 if env
['BUILD_GPU']:
1231 env
.Append(CPPDEFINES
=['BUILD_GPU'])
1233 # Warn about missing optional functionality
1235 if not main
['HAVE_PERF_ATTR_EXCLUDE_HOST']:
1236 print "Warning: perf_event headers lack support for the " \
1237 "exclude_host attribute. KVM instruction counts will " \
1240 # Save sticky variable settings back to current variables file
1241 sticky_vars
.Save(current_vars_file
, env
)
1244 env
.Append(CCFLAGS
=['-msse2'])
1246 # The src/SConscript file sets up the build rules in 'env' according
1247 # to the configured variables. It returns a list of environments,
1248 # one for each variant build (debug, opt, etc.)
1249 SConscript('src/SConscript', variant_dir
= variant_path
, exports
= 'env')
1253 Usage: scons [scons options] [build variables] [target(s)]
1255 Extra scons options:
1258 Global build variables: