3 # Copyright (c) 2013, 2015-2017 ARM Limited
6 # The license below extends only to copyright in the software and shall
7 # not be construed as granting a license to any other intellectual
8 # property including but not limited to intellectual property relating
9 # to a hardware implementation of the functionality of the software
10 # licensed hereunder. You may use the software subject to the license
11 # terms below provided that you ensure that this notice is replicated
12 # unmodified and in its entirety in all distributions of the software,
13 # modified or unmodified, in source code or in binary form.
15 # Copyright (c) 2011 Advanced Micro Devices, Inc.
16 # Copyright (c) 2009 The Hewlett-Packard Development Company
17 # Copyright (c) 2004-2005 The Regents of The University of Michigan
18 # All rights reserved.
20 # Redistribution and use in source and binary forms, with or without
21 # modification, are permitted provided that the following conditions are
22 # met: redistributions of source code must retain the above copyright
23 # notice, this list of conditions and the following disclaimer;
24 # redistributions in binary form must reproduce the above copyright
25 # notice, this list of conditions and the following disclaimer in the
26 # documentation and/or other materials provided with the distribution;
27 # neither the name of the copyright holders nor the names of its
28 # contributors may be used to endorse or promote products derived from
29 # this software without specific prior written permission.
31 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 # Authors: Steve Reinhardt
46 ###################################################
48 # SCons top-level build description (SConstruct) file.
50 # While in this directory ('gem5'), just type 'scons' to build the default
51 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
52 # to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
53 # the optimized full-system version).
55 # You can build gem5 in a different directory as long as there is a
56 # 'build/<CONFIG>' somewhere along the target path. The build system
57 # expects that all configs under the same build directory are being
58 # built for the same host system.
62 # The following two commands are equivalent. The '-u' option tells
63 # scons to search up the directory tree for this SConstruct file.
64 # % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
65 # % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
67 # The following two commands are equivalent and demonstrate building
68 # in a directory outside of the source tree. The '-C' option tells
69 # scons to chdir to the specified directory to find this SConstruct
71 # % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
72 # % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
74 # You can use 'scons -H' to print scons options. If you're in this
75 # 'gem5' directory (or use -u or -C to tell scons where to find this
76 # file), you can use 'scons -h' to print all the gem5-specific build
79 ###################################################
81 from __future__
import print_function
83 # Global Python includes
91 from os
import mkdir
, environ
92 from os
.path
import abspath
, basename
, dirname
, expanduser
, normpath
93 from os
.path
import exists
, isdir
, isfile
94 from os
.path
import join
as joinpath
, split
as splitpath
100 from m5
.util
import compareVersions
, readCommand
111 # There's a bug in scons in that (1) by default, the help texts from
112 # AddOption() are supposed to be displayed when you type 'scons -h'
113 # and (2) you can override the help displayed by 'scons -h' using the
114 # Help() function, but these two features are incompatible: once
115 # you've overridden the help text using Help(), there's no way to get
116 # at the help texts from AddOptions. See:
117 # http://scons.tigris.org/issues/show_bug.cgi?id=2356
118 # http://scons.tigris.org/issues/show_bug.cgi?id=2611
119 # This hack lets us extract the help text from AddOptions and
120 # re-inject it via Help(). Ideally someday this bug will be fixed and
121 # we can just use AddOption directly.
122 def AddLocalOption(*args
, **kwargs
):
125 help = " " + ", ".join(args
)
128 if length
>= col_width
:
129 help += "\n" + " " * col_width
131 help += " " * (col_width
- length
)
132 help += kwargs
["help"]
133 help_texts
["options"] += help + "\n"
135 AddOption(*args
, **kwargs
)
137 AddLocalOption('--colors', dest
='use_colors', action
='store_true',
138 help="Add color to abbreviated scons output")
139 AddLocalOption('--no-colors', dest
='use_colors', action
='store_false',
140 help="Don't add color to abbreviated scons output")
141 AddLocalOption('--with-cxx-config', dest
='with_cxx_config',
143 help="Build with support for C++-based configuration")
144 AddLocalOption('--default', dest
='default', type='string', action
='store',
145 help='Override which build_opts file to use for defaults')
146 AddLocalOption('--ignore-style', dest
='ignore_style', action
='store_true',
147 help='Disable style checking hooks')
148 AddLocalOption('--no-lto', dest
='no_lto', action
='store_true',
149 help='Disable Link-Time Optimization for fast')
150 AddLocalOption('--force-lto', dest
='force_lto', action
='store_true',
151 help='Use Link-Time Optimization instead of partial linking' +
152 ' when the compiler doesn\'t support using them together.')
153 AddLocalOption('--update-ref', dest
='update_ref', action
='store_true',
154 help='Update test reference outputs')
155 AddLocalOption('--verbose', dest
='verbose', action
='store_true',
156 help='Print full tool command lines')
157 AddLocalOption('--without-python', dest
='without_python',
159 help='Build without Python configuration support')
160 AddLocalOption('--without-tcmalloc', dest
='without_tcmalloc',
162 help='Disable linking against tcmalloc')
163 AddLocalOption('--with-ubsan', dest
='with_ubsan', action
='store_true',
164 help='Build with Undefined Behavior Sanitizer if available')
165 AddLocalOption('--with-asan', dest
='with_asan', action
='store_true',
166 help='Build with Address Sanitizer if available')
168 if GetOption('no_lto') and GetOption('force_lto'):
169 print('--no-lto and --force-lto are mutually exclusive')
172 ########################################################################
174 # Set up the main build environment.
176 ########################################################################
180 from gem5_scons
import Transform
181 from gem5_scons
.util
import get_termcap
182 termcap
= get_termcap()
184 main_dict_keys
= main
.Dictionary().keys()
186 # Check that we have a C/C++ compiler
187 if not ('CC' in main_dict_keys
and 'CXX' in main_dict_keys
):
188 print("No C++ compiler installed (package g++ on Ubuntu and RedHat)")
191 ###################################################
193 # Figure out which configurations to set up based on the path(s) of
196 ###################################################
198 # Find default configuration & binary.
199 Default(environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
201 # helper function: find last occurrence of element in list
202 def rfind(l
, elt
, offs
= -1):
203 for i
in range(len(l
)+offs
, 0, -1):
206 raise ValueError, "element not found"
208 # Take a list of paths (or SCons Nodes) and return a list with all
209 # paths made absolute and ~-expanded. Paths will be interpreted
210 # relative to the launch directory unless a different root is provided
211 def makePathListAbsolute(path_list
, root
=GetLaunchDir()):
212 return [abspath(joinpath(root
, expanduser(str(p
))))
215 # Each target must have 'build' in the interior of the path; the
216 # directory below this will determine the build parameters. For
217 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
218 # recognize that ALPHA_SE specifies the configuration because it
219 # follow 'build' in the build path.
221 # The funky assignment to "[:]" is needed to replace the list contents
222 # in place rather than reassign the symbol to a new list, which
223 # doesn't work (obviously!).
224 BUILD_TARGETS
[:] = makePathListAbsolute(BUILD_TARGETS
)
226 # Generate a list of the unique build roots and configs that the
227 # collected targets reference.
230 for t
in BUILD_TARGETS
:
231 path_dirs
= t
.split('/')
233 build_top
= rfind(path_dirs
, 'build', -2)
235 print("Error: no non-leaf 'build' dir found on target path", t
)
237 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
239 build_root
= this_build_root
241 if this_build_root
!= build_root
:
242 print("Error: build targets not under same build root\n"
243 " %s\n %s" % (build_root
, this_build_root
))
245 variant_path
= joinpath('/',*path_dirs
[:build_top
+2])
246 if variant_path
not in variant_paths
:
247 variant_paths
.append(variant_path
)
249 # Make sure build_root exists (might not if this is the first build there)
250 if not isdir(build_root
):
252 main
['BUILDROOT'] = build_root
256 main
.SConsignFile(joinpath(build_root
, "sconsign"))
258 # Default duplicate option is to use hard links, but this messes up
259 # when you use emacs to edit a file in the target dir, as emacs moves
260 # file to file~ then copies to file, breaking the link. Symbolic
261 # (soft) links work better.
262 main
.SetOption('duplicate', 'soft-copy')
265 # Set up global sticky variables... these are common to an entire build
266 # tree (not specific to a particular build like ALPHA_SE)
269 global_vars_file
= joinpath(build_root
, 'variables.global')
271 global_vars
= Variables(global_vars_file
, args
=ARGUMENTS
)
273 global_vars
.AddVariables(
274 ('CC', 'C compiler', environ
.get('CC', main
['CC'])),
275 ('CXX', 'C++ compiler', environ
.get('CXX', main
['CXX'])),
276 ('PROTOC', 'protoc tool', environ
.get('PROTOC', 'protoc')),
277 ('BATCH', 'Use batch pool for build and tests', False),
278 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
279 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
280 ('EXTRAS', 'Add extra directories to the compilation', '')
283 # Update main environment with values from ARGUMENTS & global_vars_file
284 global_vars
.Update(main
)
285 help_texts
["global_vars"] += global_vars
.GenerateHelpText(main
)
287 # Save sticky variable settings back to current variables file
288 global_vars
.Save(global_vars_file
, main
)
290 # Parse EXTRAS variable to build list of all directories where we're
291 # look for sources etc. This list is exported as extras_dir_list.
292 base_dir
= main
.srcdir
.abspath
294 extras_dir_list
= makePathListAbsolute(main
['EXTRAS'].split(':'))
299 Export('extras_dir_list')
301 # the ext directory should be on the #includes path
302 main
.Append(CPPPATH
=[Dir('ext')])
304 # Add shared top-level headers
305 main
.Prepend(CPPPATH
=Dir('include'))
307 if GetOption('verbose'):
308 def MakeAction(action
, string
, *args
, **kwargs
):
309 return Action(action
, *args
, **kwargs
)
312 main
['CCCOMSTR'] = Transform("CC")
313 main
['CXXCOMSTR'] = Transform("CXX")
314 main
['ASCOMSTR'] = Transform("AS")
315 main
['ARCOMSTR'] = Transform("AR", 0)
316 main
['LINKCOMSTR'] = Transform("LINK", 0)
317 main
['SHLINKCOMSTR'] = Transform("SHLINK", 0)
318 main
['RANLIBCOMSTR'] = Transform("RANLIB", 0)
319 main
['M4COMSTR'] = Transform("M4")
320 main
['SHCCCOMSTR'] = Transform("SHCC")
321 main
['SHCXXCOMSTR'] = Transform("SHCXX")
324 # Initialize the Link-Time Optimization (LTO) flags
325 main
['LTO_CCFLAGS'] = []
326 main
['LTO_LDFLAGS'] = []
328 # According to the readme, tcmalloc works best if the compiler doesn't
329 # assume that we're using the builtin malloc and friends. These flags
330 # are compiler-specific, so we need to set them after we detect which
331 # compiler we're using.
332 main
['TCMALLOC_CCFLAGS'] = []
334 CXX_version
= readCommand([main
['CXX'],'--version'], exception
=False)
335 CXX_V
= readCommand([main
['CXX'],'-V'], exception
=False)
337 main
['GCC'] = CXX_version
and CXX_version
.find('g++') >= 0
338 main
['CLANG'] = CXX_version
and CXX_version
.find('clang') >= 0
339 if main
['GCC'] + main
['CLANG'] > 1:
340 print('Error: How can we have two at the same time?')
343 # Set up default C++ compiler flags
344 if main
['GCC'] or main
['CLANG']:
345 # As gcc and clang share many flags, do the common parts here
346 main
.Append(CCFLAGS
=['-pipe'])
347 main
.Append(CCFLAGS
=['-fno-strict-aliasing'])
348 # Enable -Wall and -Wextra and then disable the few warnings that
349 # we consistently violate
350 main
.Append(CCFLAGS
=['-Wall', '-Wundef', '-Wextra',
351 '-Wno-sign-compare', '-Wno-unused-parameter'])
352 # We always compile using C++11
353 main
.Append(CXXFLAGS
=['-std=c++11'])
354 if sys
.platform
.startswith('freebsd'):
355 main
.Append(CCFLAGS
=['-I/usr/local/include'])
356 main
.Append(CXXFLAGS
=['-I/usr/local/include'])
358 main
['FILTER_PSHLINKFLAGS'] = lambda x
: str(x
).replace(' -shared', '')
359 main
['PSHLINKFLAGS'] = main
.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}')
360 main
['PLINKFLAGS'] = main
.subst('${LINKFLAGS}')
361 shared_partial_flags
= ['-r', '-nostdlib']
362 main
.Append(PSHLINKFLAGS
=shared_partial_flags
)
363 main
.Append(PLINKFLAGS
=shared_partial_flags
)
365 # Treat warnings as errors but white list some warnings that we
366 # want to allow (e.g., deprecation warnings).
367 main
.Append(CCFLAGS
=['-Werror',
368 '-Wno-error=deprecated-declarations',
369 '-Wno-error=deprecated',
372 print(termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
, end
=' ')
373 print("Don't know what compiler options to use for your compiler.")
374 print(termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX'])
375 print(termcap
.Yellow
+ ' version:' + termcap
.Normal
, end
= ' ')
377 print(termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +
380 print(CXX_version
.replace('\n', '<nl>'))
381 print(" If you're trying to use a compiler other than GCC")
382 print(" or clang, there appears to be something wrong with your")
383 print(" environment.")
385 print(" If you are trying to use a compiler other than those listed")
386 print(" above you will need to ease fix SConstruct and ")
387 print(" src/SConscript to support that compiler.")
391 # Check for a supported version of gcc. >= 4.8 is chosen for its
392 # level of c++11 support. See
393 # http://gcc.gnu.org/projects/cxx0x.html for details.
394 gcc_version
= readCommand([main
['CXX'], '-dumpversion'], exception
=False)
395 if compareVersions(gcc_version
, "4.8") < 0:
396 print('Error: gcc version 4.8 or newer required.')
397 print(' Installed version: ', gcc_version
)
400 main
['GCC_VERSION'] = gcc_version
402 if compareVersions(gcc_version
, '4.9') >= 0:
403 # Incremental linking with LTO is currently broken in gcc versions
404 # 4.9 and above. A version where everything works completely hasn't
405 # yet been identified.
407 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67548
408 main
['BROKEN_INCREMENTAL_LTO'] = True
409 if compareVersions(gcc_version
, '6.0') >= 0:
410 # gcc versions 6.0 and greater accept an -flinker-output flag which
411 # selects what type of output the linker should generate. This is
412 # necessary for incremental lto to work, but is also broken in
413 # current versions of gcc. It may not be necessary in future
414 # versions. We add it here since it might be, and as a reminder that
415 # it exists. It's excluded if lto is being forced.
417 # https://gcc.gnu.org/gcc-6/changes.html
418 # https://gcc.gnu.org/ml/gcc-patches/2015-11/msg03161.html
419 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866
420 if not GetOption('force_lto'):
421 main
.Append(PSHLINKFLAGS
='-flinker-output=rel')
422 main
.Append(PLINKFLAGS
='-flinker-output=rel')
424 # gcc from version 4.8 and above generates "rep; ret" instructions
425 # to avoid performance penalties on certain AMD chips. Older
426 # assemblers detect this as an error, "Error: expecting string
427 # instruction after `rep'"
428 as_version_raw
= readCommand([main
['AS'], '-v', '/dev/null',
430 exception
=False).split()
432 # version strings may contain extra distro-specific
433 # qualifiers, so play it safe and keep only what comes before
435 as_version
= as_version_raw
[-1].split('-')[0] if as_version_raw
else None
437 if not as_version
or compareVersions(as_version
, "2.23") < 0:
438 print(termcap
.Yellow
+ termcap
.Bold
+
439 'Warning: This combination of gcc and binutils have' +
440 ' known incompatibilities.\n' +
441 ' If you encounter build problems, please update ' +
442 'binutils to 2.23.' +
445 # Make sure we warn if the user has requested to compile with the
446 # Undefined Benahvior Sanitizer and this version of gcc does not
448 if GetOption('with_ubsan') and \
449 compareVersions(gcc_version
, '4.9') < 0:
450 print(termcap
.Yellow
+ termcap
.Bold
+
451 'Warning: UBSan is only supported using gcc 4.9 and later.' +
454 disable_lto
= GetOption('no_lto')
455 if not disable_lto
and main
.get('BROKEN_INCREMENTAL_LTO', False) and \
456 not GetOption('force_lto'):
457 print(termcap
.Yellow
+ termcap
.Bold
+
458 'Warning: Your compiler doesn\'t support incremental linking' +
459 ' and lto at the same time, so lto is being disabled. To force' +
460 ' lto on anyway, use the --force-lto option. That will disable' +
461 ' partial linking.' +
465 # Add the appropriate Link-Time Optimization (LTO) flags
466 # unless LTO is explicitly turned off. Note that these flags
467 # are only used by the fast target.
469 # Pass the LTO flag when compiling to produce GIMPLE
470 # output, we merely create the flags here and only append
472 main
['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
474 # Use the same amount of jobs for LTO as we are running
476 main
['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
478 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin-malloc', '-fno-builtin-calloc',
479 '-fno-builtin-realloc', '-fno-builtin-free'])
481 # add option to check for undeclared overrides
482 if compareVersions(gcc_version
, "5.0") > 0:
483 main
.Append(CCFLAGS
=['-Wno-error=suggest-override'])
485 # The address sanitizer is available for gcc >= 4.8
486 if GetOption('with_asan'):
487 if GetOption('with_ubsan') and \
488 compareVersions(env
['GCC_VERSION'], '4.9') >= 0:
489 env
.Append(CCFLAGS
=['-fsanitize=address,undefined',
490 '-fno-omit-frame-pointer'],
491 LINKFLAGS
='-fsanitize=address,undefined')
493 env
.Append(CCFLAGS
=['-fsanitize=address',
494 '-fno-omit-frame-pointer'],
495 LINKFLAGS
='-fsanitize=address')
496 # Only gcc >= 4.9 supports UBSan, so check both the version
497 # and the command-line option before adding the compiler and
499 elif GetOption('with_ubsan') and \
500 compareVersions(env
['GCC_VERSION'], '4.9') >= 0:
501 env
.Append(CCFLAGS
='-fsanitize=undefined')
502 env
.Append(LINKFLAGS
='-fsanitize=undefined')
505 # Check for a supported version of clang, >= 3.1 is needed to
506 # support similar features as gcc 4.8. See
507 # http://clang.llvm.org/cxx_status.html for details
508 clang_version_re
= re
.compile(".* version (\d+\.\d+)")
509 clang_version_match
= clang_version_re
.search(CXX_version
)
510 if (clang_version_match
):
511 clang_version
= clang_version_match
.groups()[0]
512 if compareVersions(clang_version
, "3.1") < 0:
513 print('Error: clang version 3.1 or newer required.')
514 print(' Installed version:', clang_version
)
517 print('Error: Unable to determine clang version.')
520 # clang has a few additional warnings that we disable, extraneous
521 # parantheses are allowed due to Ruby's printing of the AST,
522 # finally self assignments are allowed as the generated CPU code
524 main
.Append(CCFLAGS
=['-Wno-parentheses',
526 # Some versions of libstdc++ (4.8?) seem to
527 # use struct hash and class hash
529 '-Wno-mismatched-tags',
532 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin'])
534 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
535 # opposed to libstdc++, as the later is dated.
536 if sys
.platform
== "darwin":
537 main
.Append(CXXFLAGS
=['-stdlib=libc++'])
538 main
.Append(LIBS
=['c++'])
540 # On FreeBSD we need libthr.
541 if sys
.platform
.startswith('freebsd'):
542 main
.Append(LIBS
=['thr'])
544 # We require clang >= 3.1, so there is no need to check any
546 if GetOption('with_ubsan'):
547 if GetOption('with_asan'):
548 env
.Append(CCFLAGS
=['-fsanitize=address,undefined',
549 '-fno-omit-frame-pointer'],
550 LINKFLAGS
='-fsanitize=address,undefined')
552 env
.Append(CCFLAGS
='-fsanitize=undefined',
553 LINKFLAGS
='-fsanitize=undefined')
555 elif GetOption('with_asan'):
556 env
.Append(CCFLAGS
=['-fsanitize=address',
557 '-fno-omit-frame-pointer'],
558 LINKFLAGS
='-fsanitize=address')
561 print(termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
, end
=' ')
562 print("Don't know what compiler options to use for your compiler.")
563 print(termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX'])
564 print(termcap
.Yellow
+ ' version:' + termcap
.Normal
, end
=' ')
566 print(termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +
569 print(CXX_version
.replace('\n', '<nl>'))
570 print(" If you're trying to use a compiler other than GCC")
571 print(" or clang, there appears to be something wrong with your")
572 print(" environment.")
574 print(" If you are trying to use a compiler other than those listed")
575 print(" above you will need to ease fix SConstruct and ")
576 print(" src/SConscript to support that compiler.")
579 # Set up common yacc/bison flags (needed for Ruby)
580 main
['YACCFLAGS'] = '-d'
581 main
['YACCHXXFILESUFFIX'] = '.hh'
583 # Do this after we save setting back, or else we'll tack on an
584 # extra 'qdo' every time we run scons.
586 main
['CC'] = main
['BATCH_CMD'] + ' ' + main
['CC']
587 main
['CXX'] = main
['BATCH_CMD'] + ' ' + main
['CXX']
588 main
['AS'] = main
['BATCH_CMD'] + ' ' + main
['AS']
589 main
['AR'] = main
['BATCH_CMD'] + ' ' + main
['AR']
590 main
['RANLIB'] = main
['BATCH_CMD'] + ' ' + main
['RANLIB']
592 if sys
.platform
== 'cygwin':
593 # cygwin has some header file issues...
594 main
.Append(CCFLAGS
=["-Wno-uninitialized"])
596 # Check for the protobuf compiler
597 protoc_version
= readCommand([main
['PROTOC'], '--version'],
598 exception
='').split()
600 # First two words should be "libprotoc x.y.z"
601 if len(protoc_version
) < 2 or protoc_version
[0] != 'libprotoc':
602 print(termcap
.Yellow
+ termcap
.Bold
+
603 'Warning: Protocol buffer compiler (protoc) not found.\n' +
604 ' Please install protobuf-compiler for tracing support.' +
606 main
['PROTOC'] = False
608 # Based on the availability of the compress stream wrappers,
610 min_protoc_version
= '2.1.0'
611 if compareVersions(protoc_version
[1], min_protoc_version
) < 0:
612 print(termcap
.Yellow
+ termcap
.Bold
+
613 'Warning: protoc version', min_protoc_version
,
614 'or newer required.\n' +
615 ' Installed version:', protoc_version
[1],
617 main
['PROTOC'] = False
619 # Attempt to determine the appropriate include path and
620 # library path using pkg-config, that means we also need to
621 # check for pkg-config. Note that it is possible to use
622 # protobuf without the involvement of pkg-config. Later on we
623 # check go a library config check and at that point the test
624 # will fail if libprotobuf cannot be found.
625 if readCommand(['pkg-config', '--version'], exception
=''):
627 # Attempt to establish what linking flags to add for protobuf
629 main
.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
631 print(termcap
.Yellow
+ termcap
.Bold
+
632 'Warning: pkg-config could not get protobuf flags.' +
636 # Check for 'timeout' from GNU coreutils. If present, regressions will
637 # be run with a time limit. We require version 8.13 since we rely on
638 # support for the '--foreground' option.
639 if sys
.platform
.startswith('freebsd'):
640 timeout_lines
= readCommand(['gtimeout', '--version'],
641 exception
='').splitlines()
643 timeout_lines
= readCommand(['timeout', '--version'],
644 exception
='').splitlines()
645 # Get the first line and tokenize it
646 timeout_version
= timeout_lines
[0].split() if timeout_lines
else []
647 main
['TIMEOUT'] = timeout_version
and \
648 compareVersions(timeout_version
[-1], '8.13') >= 0
650 # Add a custom Check function to test for structure members.
651 def CheckMember(context
, include
, decl
, member
, include_quotes
="<>"):
652 context
.Message("Checking for member %s in %s..." %
658 (void)test.%(member)s;
661 """ % { "header" : include_quotes
[0] + include
+ include_quotes
[1],
666 ret
= context
.TryCompile(text
, extension
=".cc")
670 # Platform-specific configuration. Note again that we assume that all
671 # builds under a given build root run on the same host platform.
672 conf
= Configure(main
,
673 conf_dir
= joinpath(build_root
, '.scons_config'),
674 log_file
= joinpath(build_root
, 'scons_config.log'),
676 'CheckMember' : CheckMember
,
679 # Check if we should compile a 64 bit binary on Mac OS X/Darwin
682 uname
= platform
.uname()
683 if uname
[0] == 'Darwin' and compareVersions(uname
[2], '9.0.0') >= 0:
684 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
685 main
.Append(CCFLAGS
=['-arch', 'x86_64'])
686 main
.Append(CFLAGS
=['-arch', 'x86_64'])
687 main
.Append(LINKFLAGS
=['-arch', 'x86_64'])
688 main
.Append(ASFLAGS
=['-arch', 'x86_64'])
692 # Recent versions of scons substitute a "Null" object for Configure()
693 # when configuration isn't necessary, e.g., if the "--help" option is
694 # present. Unfortuantely this Null object always returns false,
695 # breaking all our configuration checks. We replace it with our own
696 # more optimistic null object that returns True instead.
698 def NullCheck(*args
, **kwargs
):
702 def __init__(self
, env
):
706 def __getattr__(self
, mname
):
709 conf
= NullConf(main
)
711 # Cache build files in the supplied directory.
712 if main
['M5_BUILD_CACHE']:
713 print('Using build cache located at', main
['M5_BUILD_CACHE'])
714 CacheDir(main
['M5_BUILD_CACHE'])
716 main
['USE_PYTHON'] = not GetOption('without_python')
717 if main
['USE_PYTHON']:
718 # Find Python include and library directories for embedding the
719 # interpreter. We rely on python-config to resolve the appropriate
720 # includes and linker flags. ParseConfig does not seem to understand
721 # the more exotic linker flags such as -Xlinker and -export-dynamic so
722 # we add them explicitly below. If you want to link in an alternate
723 # version of python, see above for instructions on how to invoke
724 # scons with the appropriate PATH set.
726 # First we check if python2-config exists, else we use python-config
727 python_config
= readCommand(['which', 'python2-config'],
728 exception
='').strip()
729 if not os
.path
.exists(python_config
):
730 python_config
= readCommand(['which', 'python-config'],
731 exception
='').strip()
732 py_includes
= readCommand([python_config
, '--includes'],
733 exception
='').split()
734 # Strip the -I from the include folders before adding them to the
736 main
.Append(CPPPATH
=map(lambda inc
: inc
[2:], py_includes
))
738 # Read the linker flags and split them into libraries and other link
739 # flags. The libraries are added later through the call the CheckLib.
740 py_ld_flags
= readCommand([python_config
, '--ldflags'],
741 exception
='').split()
743 for lib
in py_ld_flags
:
744 if not lib
.startswith('-l'):
745 main
.Append(LINKFLAGS
=[lib
])
748 if lib
not in py_libs
:
751 # verify that this stuff works
752 if not conf
.CheckHeader('Python.h', '<>'):
753 print("Error: can't find Python.h header in", py_includes
)
754 print("Install Python headers (package python-dev on " +
755 "Ubuntu and RedHat)")
759 if not conf
.CheckLib(lib
):
760 print("Error: can't find library %s required by python" % lib
)
763 # On Solaris you need to use libsocket for socket ops
764 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
765 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
766 print("Can't find library with socket calls (e.g. accept())")
769 # Check for zlib. If the check passes, libz will be automatically
770 # added to the LIBS environment variable.
771 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
772 print('Error: did not find needed zlib compression library '
773 'and/or zlib.h header file.')
774 print(' Please install zlib and try again.')
777 # If we have the protobuf compiler, also make sure we have the
778 # development libraries. If the check passes, libprotobuf will be
779 # automatically added to the LIBS environment variable. After
780 # this, we can use the HAVE_PROTOBUF flag to determine if we have
781 # got both protoc and libprotobuf available.
782 main
['HAVE_PROTOBUF'] = main
['PROTOC'] and \
783 conf
.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
784 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
786 # If we have the compiler but not the library, print another warning.
787 if main
['PROTOC'] and not main
['HAVE_PROTOBUF']:
788 print(termcap
.Yellow
+ termcap
.Bold
+
789 'Warning: did not find protocol buffer library and/or headers.\n' +
790 ' Please install libprotobuf-dev for tracing support.' +
795 conf
.CheckLibWithHeader(None, 'time.h', 'C',
796 'clock_nanosleep(0,0,NULL,NULL);') or \
797 conf
.CheckLibWithHeader('rt', 'time.h', 'C',
798 'clock_nanosleep(0,0,NULL,NULL);')
800 have_posix_timers
= \
801 conf
.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C',
802 'timer_create(CLOCK_MONOTONIC, NULL, NULL);')
804 if not GetOption('without_tcmalloc'):
805 if conf
.CheckLib('tcmalloc'):
806 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
807 elif conf
.CheckLib('tcmalloc_minimal'):
808 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
810 print(termcap
.Yellow
+ termcap
.Bold
+
811 "You can get a 12% performance improvement by "
812 "installing tcmalloc (libgoogle-perftools-dev package "
813 "on Ubuntu or RedHat)." + termcap
.Normal
)
816 # Detect back trace implementations. The last implementation in the
817 # list will be used by default.
818 backtrace_impls
= [ "none" ]
820 backtrace_checker
= 'char temp;' + \
821 ' backtrace_symbols_fd((void*)&temp, 0, 0);'
822 if conf
.CheckLibWithHeader(None, 'execinfo.h', 'C', backtrace_checker
):
823 backtrace_impls
.append("glibc")
824 elif conf
.CheckLibWithHeader('execinfo', 'execinfo.h', 'C',
826 # NetBSD and FreeBSD need libexecinfo.
827 backtrace_impls
.append("glibc")
828 main
.Append(LIBS
=['execinfo'])
830 if backtrace_impls
[-1] == "none":
831 default_backtrace_impl
= "none"
832 print(termcap
.Yellow
+ termcap
.Bold
+
833 "No suitable back trace implementation found." +
836 if not have_posix_clock
:
837 print("Can't find library for POSIX clocks.")
839 # Check for <fenv.h> (C99 FP environment control)
840 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
842 print("Warning: Header file <fenv.h> not found.")
843 print(" This host has no IEEE FP rounding mode control.")
845 # Check for <png.h> (libpng library needed if wanting to dump
846 # frame buffer image in png format)
847 have_png
= conf
.CheckHeader('png.h', '<>')
849 print("Warning: Header file <png.h> not found.")
850 print(" This host has no libpng library.")
851 print(" Disabling support for PNG framebuffers.")
853 # Check if we should enable KVM-based hardware virtualization. The API
854 # we rely on exists since version 2.6.36 of the kernel, but somehow
855 # the KVM_API_VERSION does not reflect the change. We test for one of
856 # the types as a fall back.
857 have_kvm
= conf
.CheckHeader('linux/kvm.h', '<>')
859 print("Info: Compatible header file <linux/kvm.h> not found, "
860 "disabling KVM support.")
862 # Check if the TUN/TAP driver is available.
863 have_tuntap
= conf
.CheckHeader('linux/if_tun.h', '<>')
865 print("Info: Compatible header file <linux/if_tun.h> not found.")
867 # x86 needs support for xsave. We test for the structure here since we
868 # won't be able to run new tests by the time we know which ISA we're
870 have_kvm_xsave
= conf
.CheckTypeSize('struct kvm_xsave',
871 '#include <linux/kvm.h>') != 0
873 # Check if the requested target ISA is compatible with the host
874 def is_isa_kvm_compatible(isa
):
877 host_isa
= platform
.machine()
879 print("Warning: Failed to determine host ISA.")
882 if not have_posix_timers
:
883 print("Warning: Can not enable KVM, host seems to lack support "
888 return host_isa
in ( "armv7l", "aarch64" )
890 if host_isa
!= "x86_64":
893 if not have_kvm_xsave
:
894 print("KVM on x86 requires xsave support in kernel headers.")
902 # Check if the exclude_host attribute is available. We want this to
903 # get accurate instruction counts in KVM.
904 main
['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf
.CheckMember(
905 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host')
908 ######################################################################
910 # Finish the configuration
914 ######################################################################
916 # Collect all non-global variables
919 # Define the universe of supported ISAs
921 all_gpu_isa_list
= [ ]
922 Export('all_isa_list')
923 Export('all_gpu_isa_list')
925 class CpuModel(object):
926 '''The CpuModel class encapsulates everything the ISA parser needs to
927 know about a particular CPU model.'''
929 # Dict of available CPU model objects. Accessible as CpuModel.dict.
932 # Constructor. Automatically adds models to CpuModel.dict.
933 def __init__(self
, name
, default
=False):
934 self
.name
= name
# name of model
936 # This cpu is enabled by default
937 self
.default
= default
940 if name
in CpuModel
.dict:
941 raise AttributeError, "CpuModel '%s' already registered" % name
942 CpuModel
.dict[name
] = self
946 # Sticky variables get saved in the variables file so they persist from
947 # one invocation to the next (unless overridden, in which case the new
948 # value becomes sticky).
949 sticky_vars
= Variables(args
=ARGUMENTS
)
950 Export('sticky_vars')
952 # Sticky variables that should be exported
954 Export('export_vars')
958 Export('all_protocols')
960 Export('protocol_dirs')
962 Export('slicc_includes')
964 # Walk the tree and execute all SConsopts scripts that wil add to the
966 if GetOption('verbose'):
967 print("Reading SConsopts")
968 for bdir
in [ base_dir
] + extras_dir_list
:
970 print("Error: directory '%s' does not exist" % bdir
)
972 for root
, dirs
, files
in os
.walk(bdir
):
973 if 'SConsopts' in files
:
974 if GetOption('verbose'):
975 print("Reading", joinpath(root
, 'SConsopts'))
976 SConscript(joinpath(root
, 'SConsopts'))
979 all_gpu_isa_list
.sort()
981 sticky_vars
.AddVariables(
982 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list
),
983 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list
),
984 ListVariable('CPU_MODELS', 'CPU models',
985 sorted(n
for n
,m
in CpuModel
.dict.iteritems() if m
.default
),
986 sorted(CpuModel
.dict.keys())),
987 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
989 BoolVariable('SS_COMPATIBLE_FP',
990 'Make floating-point results compatible with SimpleScalar',
992 BoolVariable('USE_SSE2',
993 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
995 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock
),
996 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
997 BoolVariable('USE_PNG', 'Enable support for PNG images', have_png
),
998 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability',
1000 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models',
1002 BoolVariable('USE_TUNTAP',
1003 'Enable using a tap device to bridge to the host network',
1005 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False),
1006 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
1008 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation',
1009 backtrace_impls
[-1], backtrace_impls
)
1012 # These variables get exported to #defines in config/*.hh (see src/SConscript).
1013 export_vars
+= ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA',
1014 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'USE_TUNTAP',
1015 'PROTOCOL', 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST',
1018 ###################################################
1020 # Define a SCons builder for configuration flag headers.
1022 ###################################################
1024 # This function generates a config header file that #defines the
1025 # variable symbol to the current variable setting (0 or 1). The source
1026 # operands are the name of the variable and a Value node containing the
1027 # value of the variable.
1028 def build_config_file(target
, source
, env
):
1029 (variable
, value
) = [s
.get_contents() for s
in source
]
1030 f
= file(str(target
[0]), 'w')
1031 print('#define', variable
, value
, file=f
)
1035 # Combine the two functions into a scons Action object.
1036 config_action
= MakeAction(build_config_file
, Transform("CONFIG H", 2))
1038 # The emitter munges the source & target node lists to reflect what
1039 # we're really doing.
1040 def config_emitter(target
, source
, env
):
1041 # extract variable name from Builder arg
1042 variable
= str(target
[0])
1043 # True target is config header file
1044 target
= joinpath('config', variable
.lower() + '.hh')
1046 if isinstance(val
, bool):
1047 # Force value to 0/1
1049 elif isinstance(val
, str):
1050 val
= '"' + val
+ '"'
1052 # Sources are variable name & value (packaged in SCons Value nodes)
1053 return ([target
], [Value(variable
), Value(val
)])
1055 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
1057 main
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
1059 ###################################################
1061 # Builders for static and shared partially linked object files.
1063 ###################################################
1065 partial_static_builder
= Builder(action
=SCons
.Defaults
.LinkAction
,
1066 src_suffix
='$OBJSUFFIX',
1067 src_builder
=['StaticObject', 'Object'],
1068 LINKFLAGS
='$PLINKFLAGS',
1071 def partial_shared_emitter(target
, source
, env
):
1073 tgt
.attributes
.shared
= 1
1074 return (target
, source
)
1075 partial_shared_builder
= Builder(action
=SCons
.Defaults
.ShLinkAction
,
1076 emitter
=partial_shared_emitter
,
1077 src_suffix
='$SHOBJSUFFIX',
1078 src_builder
='SharedObject',
1079 SHLINKFLAGS
='$PSHLINKFLAGS',
1082 main
.Append(BUILDERS
= { 'PartialShared' : partial_shared_builder
,
1083 'PartialStatic' : partial_static_builder
})
1085 # builds in ext are shared across all configs in the build root.
1086 ext_dir
= abspath(joinpath(str(main
.root
), 'ext'))
1088 for root
, dirs
, files
in os
.walk(ext_dir
):
1089 if 'SConscript' in files
:
1090 build_dir
= os
.path
.relpath(root
, ext_dir
)
1091 ext_build_dirs
.append(build_dir
)
1092 main
.SConscript(joinpath(root
, 'SConscript'),
1093 variant_dir
=joinpath(build_root
, build_dir
))
1095 main
.Prepend(CPPPATH
=Dir('ext/pybind11/include/'))
1097 ###################################################
1099 # This builder and wrapper method are used to set up a directory with
1100 # switching headers. Those are headers which are in a generic location and
1101 # that include more specific headers from a directory chosen at build time
1102 # based on the current build settings.
1104 ###################################################
1106 def build_switching_header(target
, source
, env
):
1107 path
= str(target
[0])
1108 subdir
= str(source
[0])
1109 dp
, fp
= os
.path
.split(path
)
1110 dp
= os
.path
.relpath(os
.path
.realpath(dp
),
1111 os
.path
.realpath(env
['BUILDDIR']))
1112 with
open(path
, 'w') as hdr
:
1113 print('#include "%s/%s/%s"' % (dp
, subdir
, fp
), file=hdr
)
1115 switching_header_action
= MakeAction(build_switching_header
,
1116 Transform('GENERATE'))
1118 switching_header_builder
= Builder(action
=switching_header_action
,
1119 source_factory
=Value
,
1122 main
.Append(BUILDERS
= { 'SwitchingHeader': switching_header_builder
})
1124 def switching_headers(self
, headers
, source
):
1125 for header
in headers
:
1126 self
.SwitchingHeader(header
, source
)
1128 main
.AddMethod(switching_headers
, 'SwitchingHeaders')
1130 ###################################################
1132 # Define build environments for selected configurations.
1134 ###################################################
1136 for variant_path
in variant_paths
:
1137 if not GetOption('silent'):
1138 print("Building in", variant_path
)
1140 # Make a copy of the build-root environment to use for this config.
1142 env
['BUILDDIR'] = variant_path
1144 # variant_dir is the tail component of build path, and is used to
1145 # determine the build parameters (e.g., 'ALPHA_SE')
1146 (build_root
, variant_dir
) = splitpath(variant_path
)
1148 # Set env variables according to the build directory config.
1149 sticky_vars
.files
= []
1150 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1151 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1152 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1153 current_vars_file
= joinpath(build_root
, 'variables', variant_dir
)
1154 if isfile(current_vars_file
):
1155 sticky_vars
.files
.append(current_vars_file
)
1156 if not GetOption('silent'):
1157 print("Using saved variables file %s" % current_vars_file
)
1158 elif variant_dir
in ext_build_dirs
:
1159 # Things in ext are built without a variant directory.
1162 # Build dir-specific variables file doesn't exist.
1164 # Make sure the directory is there so we can create it later
1165 opt_dir
= dirname(current_vars_file
)
1166 if not isdir(opt_dir
):
1169 # Get default build variables from source tree. Variables are
1170 # normally determined by name of $VARIANT_DIR, but can be
1171 # overridden by '--default=' arg on command line.
1172 default
= GetOption('default')
1173 opts_dir
= joinpath(main
.root
.abspath
, 'build_opts')
1175 default_vars_files
= [joinpath(build_root
, 'variables', default
),
1176 joinpath(opts_dir
, default
)]
1178 default_vars_files
= [joinpath(opts_dir
, variant_dir
)]
1179 existing_files
= filter(isfile
, default_vars_files
)
1181 default_vars_file
= existing_files
[0]
1182 sticky_vars
.files
.append(default_vars_file
)
1183 print("Variables file %s not found,\n using defaults in %s"
1184 % (current_vars_file
, default_vars_file
))
1186 print("Error: cannot find variables file %s or "
1187 "default file(s) %s"
1188 % (current_vars_file
, ' or '.join(default_vars_files
)))
1191 # Apply current variable settings to env
1192 sticky_vars
.Update(env
)
1194 help_texts
["local_vars"] += \
1195 "Build variables for %s:\n" % variant_dir \
1196 + sticky_vars
.GenerateHelpText(env
)
1198 # Process variable settings.
1200 if not have_fenv
and env
['USE_FENV']:
1201 print("Warning: <fenv.h> not available; "
1202 "forcing USE_FENV to False in", variant_dir
+ ".")
1203 env
['USE_FENV'] = False
1205 if not env
['USE_FENV']:
1206 print("Warning: No IEEE FP rounding mode control in",
1208 print(" FP results may deviate slightly from other platforms.")
1210 if not have_png
and env
['USE_PNG']:
1211 print("Warning: <png.h> not available; "
1212 "forcing USE_PNG to False in", variant_dir
+ ".")
1213 env
['USE_PNG'] = False
1216 env
.Append(LIBS
=['png'])
1219 env
.Append(LIBS
=['efence'])
1223 print("Warning: Can not enable KVM, host seems to "
1225 env
['USE_KVM'] = False
1226 elif not is_isa_kvm_compatible(env
['TARGET_ISA']):
1227 print("Info: KVM support disabled due to unsupported host and "
1228 "target ISA combination")
1229 env
['USE_KVM'] = False
1231 if env
['USE_TUNTAP']:
1233 print("Warning: Can't connect EtherTap with a tap device.")
1234 env
['USE_TUNTAP'] = False
1236 if env
['BUILD_GPU']:
1237 env
.Append(CPPDEFINES
=['BUILD_GPU'])
1239 # Warn about missing optional functionality
1241 if not main
['HAVE_PERF_ATTR_EXCLUDE_HOST']:
1242 print("Warning: perf_event headers lack support for the "
1243 "exclude_host attribute. KVM instruction counts will "
1246 # Save sticky variable settings back to current variables file
1247 sticky_vars
.Save(current_vars_file
, env
)
1250 env
.Append(CCFLAGS
=['-msse2'])
1252 # The src/SConscript file sets up the build rules in 'env' according
1253 # to the configured variables. It returns a list of environments,
1254 # one for each variant build (debug, opt, etc.)
1255 SConscript('src/SConscript', variant_dir
= variant_path
, exports
= 'env')
1259 Usage: scons [scons options] [build variables] [target(s)]
1261 Extra scons options:
1264 Global build variables: