3 # Copyright (c) 2009 The Hewlett-Packard Development Company
4 # Copyright (c) 2004-2005 The Regents of The University of Michigan
7 # Redistribution and use in source and binary forms, with or without
8 # modification, are permitted provided that the following conditions are
9 # met: redistributions of source code must retain the above copyright
10 # notice, this list of conditions and the following disclaimer;
11 # redistributions in binary form must reproduce the above copyright
12 # notice, this list of conditions and the following disclaimer in the
13 # documentation and/or other materials provided with the distribution;
14 # neither the name of the copyright holders nor the names of its
15 # contributors may be used to endorse or promote products derived from
16 # this software without specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
21 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
22 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
23 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
24 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
28 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 # Authors: Steve Reinhardt
33 ###################################################
35 # SCons top-level build description (SConstruct) file.
37 # While in this directory ('m5'), just type 'scons' to build the default
38 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
39 # to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
40 # the optimized full-system version).
42 # You can build M5 in a different directory as long as there is a
43 # 'build/<CONFIG>' somewhere along the target path. The build system
44 # expects that all configs under the same build directory are being
45 # built for the same host system.
49 # The following two commands are equivalent. The '-u' option tells
50 # scons to search up the directory tree for this SConstruct file.
51 # % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
52 # % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
54 # The following two commands are equivalent and demonstrate building
55 # in a directory outside of the source tree. The '-C' option tells
56 # scons to chdir to the specified directory to find this SConstruct
58 # % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
59 # % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
61 # You can use 'scons -H' to print scons options. If you're in this
62 # 'm5' directory (or use -u or -C to tell scons where to find this
63 # file), you can use 'scons -h' to print all the M5-specific build
66 ###################################################
68 # Check for recent-enough Python and SCons versions.
70 # Really old versions of scons only take two options for the
71 # function, so check once without the revision and once with the
72 # revision, the first instance will fail for stuff other than
73 # 0.98, and the second will fail for 0.98.0
74 EnsureSConsVersion(0, 98)
75 EnsureSConsVersion(0, 98, 1)
78 For more details, see:
79 http://m5sim.org/wiki/index.php/Compiling_M5
83 # We ensure the python version early because we have stuff that
86 EnsurePythonVersion(2, 4)
89 You can use a non-default installation of the Python interpreter by
90 either (1) rearranging your PATH so that scons finds the non-default
91 'python' first or (2) explicitly invoking an alternative interpreter
94 For more details, see:
95 http://m5sim.org/wiki/index.php/Using_a_non-default_Python_installation
99 # Global Python includes
105 from os
import mkdir
, environ
106 from os
.path
import abspath
, basename
, dirname
, expanduser
, normpath
107 from os
.path
import exists
, isdir
, isfile
108 from os
.path
import join
as joinpath
, split
as splitpath
114 extra_python_paths
= [
115 Dir('src/python').srcnode().abspath
, # M5 includes
116 Dir('ext/ply').srcnode().abspath
, # ply is used by several files
119 sys
.path
[1:1] = extra_python_paths
121 from m5
.util
import compareVersions
, readCommand
123 ########################################################################
125 # Set up the main build environment.
127 ########################################################################
128 use_vars
= set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 'PATH',
129 'PYTHONPATH', 'RANLIB' ])
132 for key
,val
in os
.environ
.iteritems():
133 if key
in use_vars
or key
.startswith("M5"):
136 main
= Environment(ENV
=use_env
)
137 main
.root
= Dir(".") # The current directory (where this file lives).
138 main
.srcdir
= Dir("src") # The source directory
140 # add useful python code PYTHONPATH so it can be used by subprocesses
142 main
.AppendENVPath('PYTHONPATH', extra_python_paths
)
144 ########################################################################
148 # If the M5 directory is a mercurial repository, we should do some
151 ########################################################################
153 hgdir
= main
.root
.Dir(".hg")
155 mercurial_style_message
= """
156 You're missing the M5 style hook.
157 Please install the hook so we can ensure that all code fits a common style.
159 All you'd need to do is add the following lines to your repository .hg/hgrc
160 or your personal .hgrc
164 style = %s/util/style.py
167 pretxncommit.style = python:style.check_whitespace
170 mercurial_bin_not_found
= """
171 Mercurial binary cannot be found, unfortunately this means that we
172 cannot easily determine the version of M5 that you are running and
173 this makes error messages more difficult to collect. Please consider
174 installing mercurial if you choose to post an error message
177 mercurial_lib_not_found
= """
178 Mercurial libraries cannot be found, ignoring style hook
179 If you are actually a M5 developer, please fix this and
180 run the style hook. It is important.
185 # 1) Grab repository revision if we know it.
186 cmd
= "hg id -n -i -t -b"
188 hg_info
= readCommand(cmd
, cwd
=main
.root
.abspath
).strip()
190 print mercurial_bin_not_found
192 # 2) Ensure that the style hook is in place.
195 if ARGUMENTS
.get('IGNORE_STYLE') != 'True':
196 from mercurial
import ui
199 print mercurial_lib_not_found
202 ui
.readconfig(hgdir
.File('hgrc').abspath
)
203 style_hook
= ui
.config('hooks', 'pretxncommit.style', None)
206 print mercurial_style_message
209 print ".hg directory not found"
211 main
['HG_INFO'] = hg_info
213 ###################################################
215 # Figure out which configurations to set up based on the path(s) of
218 ###################################################
220 # Find default configuration & binary.
221 Default(environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
223 # helper function: find last occurrence of element in list
224 def rfind(l
, elt
, offs
= -1):
225 for i
in range(len(l
)+offs
, 0, -1):
228 raise ValueError, "element not found"
230 # Each target must have 'build' in the interior of the path; the
231 # directory below this will determine the build parameters. For
232 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
233 # recognize that ALPHA_SE specifies the configuration because it
234 # follow 'build' in the bulid path.
236 # Generate absolute paths to targets so we can see where the build dir is
237 if COMMAND_LINE_TARGETS
:
238 # Ask SCons which directory it was invoked from
239 launch_dir
= GetLaunchDir()
240 # Make targets relative to invocation directory
241 abs_targets
= [ normpath(joinpath(launch_dir
, str(x
))) for x
in \
242 COMMAND_LINE_TARGETS
]
244 # Default targets are relative to root of tree
245 abs_targets
= [ normpath(joinpath(main
.root
.abspath
, str(x
))) for x
in \
249 # Generate a list of the unique build roots and configs that the
250 # collected targets reference.
253 for t
in abs_targets
:
254 path_dirs
= t
.split('/')
256 build_top
= rfind(path_dirs
, 'build', -2)
258 print "Error: no non-leaf 'build' dir found on target path", t
260 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
262 build_root
= this_build_root
264 if this_build_root
!= build_root
:
265 print "Error: build targets not under same build root\n"\
266 " %s\n %s" % (build_root
, this_build_root
)
268 variant_path
= joinpath('/',*path_dirs
[:build_top
+2])
269 if variant_path
not in variant_paths
:
270 variant_paths
.append(variant_path
)
272 # Make sure build_root exists (might not if this is the first build there)
273 if not isdir(build_root
):
278 main
.SConsignFile(joinpath(build_root
, "sconsign"))
280 # Default duplicate option is to use hard links, but this messes up
281 # when you use emacs to edit a file in the target dir, as emacs moves
282 # file to file~ then copies to file, breaking the link. Symbolic
283 # (soft) links work better.
284 main
.SetOption('duplicate', 'soft-copy')
287 # Set up global sticky variables... these are common to an entire build
288 # tree (not specific to a particular build like ALPHA_SE)
291 # Variable validators & converters for global sticky variables
292 def PathListMakeAbsolute(val
):
295 f
= lambda p
: abspath(expanduser(p
))
296 return ':'.join(map(f
, val
.split(':')))
298 def PathListAllExist(key
, val
, env
):
301 paths
= val
.split(':')
304 raise SCons
.Errors
.UserError("Path does not exist: '%s'" % path
)
306 global_sticky_vars_file
= joinpath(build_root
, 'variables.global')
308 global_sticky_vars
= Variables(global_sticky_vars_file
, args
=ARGUMENTS
)
310 global_sticky_vars
.AddVariables(
311 ('CC', 'C compiler', environ
.get('CC', main
['CC'])),
312 ('CXX', 'C++ compiler', environ
.get('CXX', main
['CXX'])),
313 ('BATCH', 'Use batch pool for build and tests', False),
314 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
315 ('EXTRAS', 'Add Extra directories to the compilation', '',
316 PathListAllExist
, PathListMakeAbsolute
),
317 BoolVariable('RUBY', 'Build with Ruby', False),
322 Usage: scons [scons options] [build options] [target(s)]
324 Global sticky options:
327 # Update main environment with values from ARGUMENTS & global_sticky_vars_file
328 global_sticky_vars
.Update(main
)
330 help_text
+= global_sticky_vars
.GenerateHelpText(main
)
332 # Save sticky variable settings back to current variables file
333 global_sticky_vars
.Save(global_sticky_vars_file
, main
)
335 # Parse EXTRAS variable to build list of all directories where we're
336 # look for sources etc. This list is exported as base_dir_list.
337 base_dir
= main
.srcdir
.abspath
339 extras_dir_list
= main
['EXTRAS'].split(':')
344 Export('extras_dir_list')
346 # the ext directory should be on the #includes path
347 main
.Append(CPPPATH
=[Dir('ext')])
349 CXX_version
= readCommand([main
['CXX'],'--version'], exception
=False)
350 CXX_V
= readCommand([main
['CXX'],'-V'], exception
=False)
352 main
['GCC'] = CXX_version
and CXX_version
.find('g++') >= 0
353 main
['SUNCC'] = CXX_V
and CXX_V
.find('Sun C++') >= 0
354 main
['ICC'] = CXX_V
and CXX_V
.find('Intel') >= 0
355 if main
['GCC'] + main
['SUNCC'] + main
['ICC'] > 1:
356 print 'Error: How can we have two at the same time?'
359 # Set up default C++ compiler flags
361 main
.Append(CCFLAGS
='-pipe')
362 main
.Append(CCFLAGS
='-fno-strict-aliasing')
363 main
.Append(CCFLAGS
=['-Wall', '-Wno-sign-compare', '-Wundef'])
364 main
.Append(CXXFLAGS
='-Wno-deprecated')
366 pass #Fix me... add warning flags once we clean up icc warnings
368 main
.Append(CCFLAGS
='-Qoption ccfe')
369 main
.Append(CCFLAGS
='-features=gcc')
370 main
.Append(CCFLAGS
='-features=extensions')
371 main
.Append(CCFLAGS
='-library=stlport4')
372 main
.Append(CCFLAGS
='-xar')
373 #main.Append(CCFLAGS='-instances=semiexplicit')
375 print 'Error: Don\'t know what compiler options to use for your compiler.'
376 print ' Please fix SConstruct and src/SConscript and try again.'
379 # Set up common yacc/bison flags (needed for Ruby)
380 main
['YACCFLAGS'] = '-d'
381 main
['YACCHXXFILESUFFIX'] = '.hh'
383 # Do this after we save setting back, or else we'll tack on an
384 # extra 'qdo' every time we run scons.
386 main
['CC'] = main
['BATCH_CMD'] + ' ' + main
['CC']
387 main
['CXX'] = main
['BATCH_CMD'] + ' ' + main
['CXX']
388 main
['AS'] = main
['BATCH_CMD'] + ' ' + main
['AS']
389 main
['AR'] = main
['BATCH_CMD'] + ' ' + main
['AR']
390 main
['RANLIB'] = main
['BATCH_CMD'] + ' ' + main
['RANLIB']
392 if sys
.platform
== 'cygwin':
393 # cygwin has some header file issues...
394 main
.Append(CCFLAGS
="-Wno-uninitialized")
397 if not main
.has_key('SWIG'):
398 print 'Error: SWIG utility not found.'
399 print ' Please install (see http://www.swig.org) and retry.'
402 # Check for appropriate SWIG version
403 swig_version
= readCommand(('swig', '-version'), exception
='').split()
404 # First 3 words should be "SWIG Version x.y.z"
405 if len(swig_version
) < 3 or \
406 swig_version
[0] != 'SWIG' or swig_version
[1] != 'Version':
407 print 'Error determining SWIG version.'
410 min_swig_version
= '1.3.28'
411 if compareVersions(swig_version
[2], min_swig_version
) < 0:
412 print 'Error: SWIG version', min_swig_version
, 'or newer required.'
413 print ' Installed version:', swig_version
[2]
416 # Set up SWIG flags & scanner
417 swig_flags
=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS')
418 main
.Append(SWIGFLAGS
=swig_flags
)
420 # filter out all existing swig scanners, they mess up the dependency
421 # stuff for some reason
423 for scanner
in main
['SCANNERS']:
424 skeys
= scanner
.skeys
428 if isinstance(skeys
, (list, tuple)) and '.i' in skeys
:
431 scanners
.append(scanner
)
433 # add the new swig scanner that we like better
434 from SCons
.Scanner
import ClassicCPP
as CPPScanner
435 swig_inc_re
= '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
436 scanners
.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re
))
438 # replace the scanners list that has what we want
439 main
['SCANNERS'] = scanners
441 # Add a custom Check function to the Configure context so that we can
442 # figure out if the compiler adds leading underscores to global
443 # variables. This is needed for the autogenerated asm files that we
444 # use for embedding the python code.
445 def CheckLeading(context
):
446 context
.Message("Checking for leading underscore in global variables...")
447 # 1) Define a global variable called x from asm so the C compiler
448 # won't change the symbol at all.
449 # 2) Declare that variable.
450 # 3) Use the variable
452 # If the compiler prepends an underscore, this will successfully
453 # link because the external symbol 'x' will be called '_x' which
454 # was defined by the asm statement. If the compiler does not
455 # prepend an underscore, this will not successfully link because
456 # '_x' will have been defined by assembly, while the C portion of
457 # the code will be trying to use 'x'
458 ret
= context
.TryLink('''
459 asm(".globl _x; _x: .byte 0");
461 int main() { return x; }
463 context
.env
.Append(LEADING_UNDERSCORE
=ret
)
467 # Platform-specific configuration. Note again that we assume that all
468 # builds under a given build root run on the same host platform.
469 conf
= Configure(main
,
470 conf_dir
= joinpath(build_root
, '.scons_config'),
471 log_file
= joinpath(build_root
, 'scons_config.log'),
472 custom_tests
= { 'CheckLeading' : CheckLeading
})
474 # Check for leading underscores. Don't really need to worry either
475 # way so don't need to check the return code.
478 # Check if we should compile a 64 bit binary on Mac OS X/Darwin
481 uname
= platform
.uname()
482 if uname
[0] == 'Darwin' and compareVersions(uname
[2], '9.0.0') >= 0:
483 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
484 main
.Append(CCFLAGS
='-arch x86_64')
485 main
.Append(CFLAGS
='-arch x86_64')
486 main
.Append(LINKFLAGS
='-arch x86_64')
487 main
.Append(ASFLAGS
='-arch x86_64')
491 # Recent versions of scons substitute a "Null" object for Configure()
492 # when configuration isn't necessary, e.g., if the "--help" option is
493 # present. Unfortuantely this Null object always returns false,
494 # breaking all our configuration checks. We replace it with our own
495 # more optimistic null object that returns True instead.
497 def NullCheck(*args
, **kwargs
):
501 def __init__(self
, env
):
505 def __getattr__(self
, mname
):
508 conf
= NullConf(main
)
510 # Find Python include and library directories for embedding the
511 # interpreter. For consistency, we will use the same Python
512 # installation used to run scons (and thus this script). If you want
513 # to link in an alternate version, see above for instructions on how
514 # to invoke scons with a different copy of the Python interpreter.
515 from distutils
import sysconfig
517 py_getvar
= sysconfig
.get_config_var
519 py_version
= 'python' + py_getvar('VERSION')
521 py_general_include
= sysconfig
.get_python_inc()
522 py_platform_include
= sysconfig
.get_python_inc(plat_specific
=True)
523 py_includes
= [ py_general_include
]
524 if py_platform_include
!= py_general_include
:
525 py_includes
.append(py_platform_include
)
527 py_lib_path
= [ py_getvar('LIBDIR') ]
528 # add the prefix/lib/pythonX.Y/config dir, but only if there is no
529 # shared library in prefix/lib/.
530 if not py_getvar('Py_ENABLE_SHARED'):
531 py_lib_path
.append(py_getvar('LIBPL'))
534 for lib
in py_getvar('LIBS').split() + py_getvar('SYSLIBS').split():
535 assert lib
.startswith('-l')
537 if lib
not in py_libs
:
539 py_libs
.append(py_version
)
541 main
.Append(CPPPATH
=py_includes
)
542 main
.Append(LIBPATH
=py_lib_path
)
544 # verify that this stuff works
545 if not conf
.CheckHeader('Python.h', '<>'):
546 print "Error: can't find Python.h header in", py_includes
550 if not conf
.CheckLib(lib
):
551 print "Error: can't find library %s required by python" % lib
554 # On Solaris you need to use libsocket for socket ops
555 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
556 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
557 print "Can't find library with socket calls (e.g. accept())"
560 # Check for zlib. If the check passes, libz will be automatically
561 # added to the LIBS environment variable.
562 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
563 print 'Error: did not find needed zlib compression library '\
564 'and/or zlib.h header file.'
565 print ' Please install zlib and try again.'
568 # Check for <fenv.h> (C99 FP environment control)
569 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
571 print "Warning: Header file <fenv.h> not found."
572 print " This host has no IEEE FP rounding mode control."
574 ######################################################################
578 mysql_config
= WhereIs('mysql_config')
579 have_mysql
= bool(mysql_config
)
581 # Check MySQL version.
583 mysql_version
= readCommand(mysql_config
+ ' --version')
584 min_mysql_version
= '4.1'
585 if compareVersions(mysql_version
, min_mysql_version
) < 0:
586 print 'Warning: MySQL', min_mysql_version
, 'or newer required.'
587 print ' Version', mysql_version
, 'detected.'
590 # Set up mysql_config commands.
592 mysql_config_include
= mysql_config
+ ' --include'
593 if os
.system(mysql_config_include
+ ' > /dev/null') != 0:
594 # older mysql_config versions don't support --include, use
596 mysql_config_include
= mysql_config
+ ' --cflags | sed s/\\\'//g'
597 # This seems to work in all versions
598 mysql_config_libs
= mysql_config
+ ' --libs'
600 ######################################################################
602 # Finish the configuration
606 ######################################################################
608 # Collect all non-global variables
611 # Define the universe of supported ISAs
613 Export('all_isa_list')
615 class CpuModel(object):
616 '''The CpuModel class encapsulates everything the ISA parser needs to
617 know about a particular CPU model.'''
619 # Dict of available CPU model objects. Accessible as CpuModel.dict.
624 # Constructor. Automatically adds models to CpuModel.dict.
625 def __init__(self
, name
, filename
, includes
, strings
, default
=False):
626 self
.name
= name
# name of model
627 self
.filename
= filename
# filename for output exec code
628 self
.includes
= includes
# include files needed in exec file
629 # The 'strings' dict holds all the per-CPU symbols we can
630 # substitute into templates etc.
631 self
.strings
= strings
633 # This cpu is enabled by default
634 self
.default
= default
637 if name
in CpuModel
.dict:
638 raise AttributeError, "CpuModel '%s' already registered" % name
639 CpuModel
.dict[name
] = self
640 CpuModel
.list.append(name
)
644 # Sticky variables get saved in the variables file so they persist from
645 # one invocation to the next (unless overridden, in which case the new
646 # value becomes sticky).
647 sticky_vars
= Variables(args
=ARGUMENTS
)
648 Export('sticky_vars')
650 # Sticky variables that should be exported
652 Export('export_vars')
654 # Non-sticky variables only apply to the current build.
655 nonsticky_vars
= Variables(args
=ARGUMENTS
)
656 Export('nonsticky_vars')
658 # Walk the tree and execute all SConsopts scripts that wil add to the
660 for bdir
in [ base_dir
] + extras_dir_list
:
661 for root
, dirs
, files
in os
.walk(bdir
):
662 if 'SConsopts' in files
:
663 print "Reading", joinpath(root
, 'SConsopts')
664 SConscript(joinpath(root
, 'SConsopts'))
668 sticky_vars
.AddVariables(
669 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list
),
670 BoolVariable('FULL_SYSTEM', 'Full-system support', False),
671 ListVariable('CPU_MODELS', 'CPU models',
672 sorted(n
for n
,m
in CpuModel
.dict.iteritems() if m
.default
),
673 sorted(CpuModel
.list)),
674 BoolVariable('NO_FAST_ALLOC', 'Disable fast object allocator', False),
675 BoolVariable('FAST_ALLOC_DEBUG', 'Enable fast object allocator debugging',
677 BoolVariable('FAST_ALLOC_STATS', 'Enable fast object allocator statistics',
679 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
681 BoolVariable('SS_COMPATIBLE_FP',
682 'Make floating-point results compatible with SimpleScalar',
684 BoolVariable('USE_SSE2',
685 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
687 BoolVariable('USE_MYSQL', 'Use MySQL for stats output', have_mysql
),
688 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
689 BoolVariable('USE_CHECKER', 'Use checker for detailed CPU models', False),
690 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False),
693 nonsticky_vars
.AddVariables(
694 BoolVariable('update_ref', 'Update test reference outputs', False)
697 # These variables get exported to #defines in config/*.hh (see src/SConscript).
698 export_vars
+= ['FULL_SYSTEM', 'USE_FENV', 'USE_MYSQL',
699 'NO_FAST_ALLOC', 'FAST_ALLOC_DEBUG', 'FAST_ALLOC_STATS',
700 'SS_COMPATIBLE_FP', 'USE_CHECKER', 'TARGET_ISA', 'CP_ANNOTATE']
702 ###################################################
704 # Define a SCons builder for configuration flag headers.
706 ###################################################
708 # This function generates a config header file that #defines the
709 # variable symbol to the current variable setting (0 or 1). The source
710 # operands are the name of the variable and a Value node containing the
711 # value of the variable.
712 def build_config_file(target
, source
, env
):
713 (variable
, value
) = [s
.get_contents() for s
in source
]
714 f
= file(str(target
[0]), 'w')
715 print >> f
, '#define', variable
, value
719 # Generate the message to be printed when building the config file.
720 def build_config_file_string(target
, source
, env
):
721 (variable
, value
) = [s
.get_contents() for s
in source
]
722 return "Defining %s as %s in %s." % (variable
, value
, target
[0])
724 # Combine the two functions into a scons Action object.
725 config_action
= Action(build_config_file
, build_config_file_string
)
727 # The emitter munges the source & target node lists to reflect what
728 # we're really doing.
729 def config_emitter(target
, source
, env
):
730 # extract variable name from Builder arg
731 variable
= str(target
[0])
732 # True target is config header file
733 target
= joinpath('config', variable
.lower() + '.hh')
735 if isinstance(val
, bool):
738 elif isinstance(val
, str):
739 val
= '"' + val
+ '"'
741 # Sources are variable name & value (packaged in SCons Value nodes)
742 return ([target
], [Value(variable
), Value(val
)])
744 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
746 main
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
748 # libelf build is shared across all configs in the build root.
749 main
.SConscript('ext/libelf/SConscript',
750 variant_dir
= joinpath(build_root
, 'libelf'))
752 # gzstream build is shared across all configs in the build root.
753 main
.SConscript('ext/gzstream/SConscript',
754 variant_dir
= joinpath(build_root
, 'gzstream'))
756 ###################################################
758 # This function is used to set up a directory with switching headers
760 ###################################################
762 main
['ALL_ISA_LIST'] = all_isa_list
763 def make_switching_dir(dname
, switch_headers
, env
):
764 # Generate the header. target[0] is the full path of the output
765 # header to generate. 'source' is a dummy variable, since we get the
766 # list of ISAs from env['ALL_ISA_LIST'].
767 def gen_switch_hdr(target
, source
, env
):
768 fname
= str(target
[0])
770 isa
= env
['TARGET_ISA'].lower()
771 print >>f
, '#include "%s/%s/%s"' % (dname
, isa
, basename(fname
))
774 # String to print when generating header
775 def gen_switch_hdr_string(target
, source
, env
):
776 return "Generating switch header " + str(target
[0])
778 # Build SCons Action object. 'varlist' specifies env vars that this
779 # action depends on; when env['ALL_ISA_LIST'] changes these actions
780 # should get re-executed.
781 switch_hdr_action
= Action(gen_switch_hdr
, gen_switch_hdr_string
,
782 varlist
=['ALL_ISA_LIST'])
784 # Instantiate actions for each header
785 for hdr
in switch_headers
:
786 env
.Command(hdr
, [], switch_hdr_action
)
787 Export('make_switching_dir')
789 ###################################################
791 # Define build environments for selected configurations.
793 ###################################################
795 for variant_path
in variant_paths
:
796 print "Building in", variant_path
798 # Make a copy of the build-root environment to use for this config.
800 env
['BUILDDIR'] = variant_path
802 # variant_dir is the tail component of build path, and is used to
803 # determine the build parameters (e.g., 'ALPHA_SE')
804 (build_root
, variant_dir
) = splitpath(variant_path
)
806 # Set env variables according to the build directory config.
807 sticky_vars
.files
= []
808 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
809 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
810 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
811 current_vars_file
= joinpath(build_root
, 'variables', variant_dir
)
812 if isfile(current_vars_file
):
813 sticky_vars
.files
.append(current_vars_file
)
814 print "Using saved variables file %s" % current_vars_file
816 # Build dir-specific variables file doesn't exist.
818 # Make sure the directory is there so we can create it later
819 opt_dir
= dirname(current_vars_file
)
820 if not isdir(opt_dir
):
823 # Get default build variables from source tree. Variables are
824 # normally determined by name of $VARIANT_DIR, but can be
825 # overriden by 'default=' arg on command line.
826 default_vars_file
= joinpath('build_opts',
827 ARGUMENTS
.get('default', variant_dir
))
828 if isfile(default_vars_file
):
829 sticky_vars
.files
.append(default_vars_file
)
830 print "Variables file %s not found,\n using defaults in %s" \
831 % (current_vars_file
, default_vars_file
)
833 print "Error: cannot find variables file %s or %s" \
834 % (current_vars_file
, default_vars_file
)
837 # Apply current variable settings to env
838 sticky_vars
.Update(env
)
839 nonsticky_vars
.Update(env
)
841 help_text
+= "\nSticky variables for %s:\n" % variant_dir \
842 + sticky_vars
.GenerateHelpText(env
) \
843 + "\nNon-sticky variables for %s:\n" % variant_dir \
844 + nonsticky_vars
.GenerateHelpText(env
)
846 # Process variable settings.
848 if not have_fenv
and env
['USE_FENV']:
849 print "Warning: <fenv.h> not available; " \
850 "forcing USE_FENV to False in", variant_dir
+ "."
851 env
['USE_FENV'] = False
853 if not env
['USE_FENV']:
854 print "Warning: No IEEE FP rounding mode control in", variant_dir
+ "."
855 print " FP results may deviate slightly from other platforms."
858 env
.Append(LIBS
=['efence'])
862 print "Warning: MySQL not available; " \
863 "forcing USE_MYSQL to False in", variant_dir
+ "."
864 env
['USE_MYSQL'] = False
866 print "Compiling in", variant_dir
, "with MySQL support."
867 env
.ParseConfig(mysql_config_libs
)
868 env
.ParseConfig(mysql_config_include
)
870 # Save sticky variable settings back to current variables file
871 sticky_vars
.Save(current_vars_file
, env
)
874 env
.Append(CCFLAGS
='-msse2')
876 # The src/SConscript file sets up the build rules in 'env' according
877 # to the configured variables. It returns a list of environments,
878 # one for each variant build (debug, opt, etc.)
879 envList
= SConscript('src/SConscript', variant_dir
= variant_path
,
882 # Set up the regression tests for each build.
884 SConscript('tests/SConscript',
885 variant_dir
= joinpath(variant_path
, 'tests', e
.Label
),
886 exports
= { 'env' : e
}, duplicate
= False)