3 # Copyright (c) 2011 Advanced Micro Devices, Inc.
4 # Copyright (c) 2009 The Hewlett-Packard Development Company
5 # Copyright (c) 2004-2005 The Regents of The University of Michigan
8 # Redistribution and use in source and binary forms, with or without
9 # modification, are permitted provided that the following conditions are
10 # met: redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer;
12 # redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in the
14 # documentation and/or other materials provided with the distribution;
15 # neither the name of the copyright holders nor the names of its
16 # contributors may be used to endorse or promote products derived from
17 # this software without specific prior written permission.
19 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
20 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
21 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
22 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
23 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
25 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
29 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 # Authors: Steve Reinhardt
34 ###################################################
36 # SCons top-level build description (SConstruct) file.
38 # While in this directory ('m5'), just type 'scons' to build the default
39 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
40 # to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
41 # the optimized full-system version).
43 # You can build M5 in a different directory as long as there is a
44 # 'build/<CONFIG>' somewhere along the target path. The build system
45 # expects that all configs under the same build directory are being
46 # built for the same host system.
50 # The following two commands are equivalent. The '-u' option tells
51 # scons to search up the directory tree for this SConstruct file.
52 # % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
53 # % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
55 # The following two commands are equivalent and demonstrate building
56 # in a directory outside of the source tree. The '-C' option tells
57 # scons to chdir to the specified directory to find this SConstruct
59 # % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
60 # % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
62 # You can use 'scons -H' to print scons options. If you're in this
63 # 'm5' directory (or use -u or -C to tell scons where to find this
64 # file), you can use 'scons -h' to print all the M5-specific build
67 ###################################################
69 # Check for recent-enough Python and SCons versions.
71 # Really old versions of scons only take two options for the
72 # function, so check once without the revision and once with the
73 # revision, the first instance will fail for stuff other than
74 # 0.98, and the second will fail for 0.98.0
75 EnsureSConsVersion(0, 98)
76 EnsureSConsVersion(0, 98, 1)
79 For more details, see:
80 http://m5sim.org/wiki/index.php/Compiling_M5
84 # We ensure the python version early because we have stuff that
87 EnsurePythonVersion(2, 4)
90 You can use a non-default installation of the Python interpreter by
91 either (1) rearranging your PATH so that scons finds the non-default
92 'python' first or (2) explicitly invoking an alternative interpreter
95 For more details, see:
96 http://m5sim.org/wiki/index.php/Using_a_non-default_Python_installation
100 # Global Python includes
106 from os
import mkdir
, environ
107 from os
.path
import abspath
, basename
, dirname
, expanduser
, normpath
108 from os
.path
import exists
, isdir
, isfile
109 from os
.path
import join
as joinpath
, split
as splitpath
115 extra_python_paths
= [
116 Dir('src/python').srcnode().abspath
, # M5 includes
117 Dir('ext/ply').srcnode().abspath
, # ply is used by several files
120 sys
.path
[1:1] = extra_python_paths
122 from m5
.util
import compareVersions
, readCommand
132 def AddM5Option(*args
, **kwargs
):
135 help = " " + ", ".join(args
)
138 if length
>= col_width
:
139 help += "\n" + " " * col_width
141 help += " " * (col_width
- length
)
142 help += kwargs
["help"]
143 help_texts
["options"] += help + "\n"
145 AddOption(*args
, **kwargs
)
147 AddM5Option('--colors', dest
='use_colors', action
='store_true',
148 help="Add color to abbreviated scons output")
149 AddM5Option('--no-colors', dest
='use_colors', action
='store_false',
150 help="Don't add color to abbreviated scons output")
151 AddM5Option('--default', dest
='default', type='string', action
='store',
152 help='Override which build_opts file to use for defaults')
153 AddM5Option('--ignore-style', dest
='ignore_style', action
='store_true',
154 help='Disable style checking hooks')
155 AddM5Option('--update-ref', dest
='update_ref', action
='store_true',
156 help='Update test reference outputs')
157 AddM5Option('--verbose', dest
='verbose', action
='store_true',
158 help='Print full tool command lines')
160 use_colors
= GetOption('use_colors')
162 from m5
.util
.terminal
import termcap
163 elif use_colors
is None:
164 # option unspecified; default behavior is to use colors iff isatty
165 from m5
.util
.terminal
import tty_termcap
as termcap
167 from m5
.util
.terminal
import no_termcap
as termcap
169 ########################################################################
171 # Set up the main build environment.
173 ########################################################################
174 use_vars
= set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 'PATH',
175 'PYTHONPATH', 'RANLIB' ])
178 for key
,val
in os
.environ
.iteritems():
179 if key
in use_vars
or key
.startswith("M5"):
182 main
= Environment(ENV
=use_env
)
183 main
.root
= Dir(".") # The current directory (where this file lives).
184 main
.srcdir
= Dir("src") # The source directory
186 # add useful python code PYTHONPATH so it can be used by subprocesses
188 main
.AppendENVPath('PYTHONPATH', extra_python_paths
)
190 ########################################################################
194 # If the M5 directory is a mercurial repository, we should do some
197 ########################################################################
199 hgdir
= main
.root
.Dir(".hg")
201 mercurial_style_message
= """
202 You're missing the gem5 style hook, which automatically checks your code
203 against the gem5 style rules on hg commit and qrefresh commands. This
204 script will now install the hook in your .hg/hgrc file.
205 Press enter to continue, or ctrl-c to abort: """
207 mercurial_style_hook
= """
208 # The following lines were automatically added by gem5/SConstruct
209 # to provide the gem5 style-checking hooks
211 style = %s/util/style.py
214 pretxncommit.style = python:style.check_style
215 pre-qrefresh.style = python:style.check_style
216 # End of SConstruct additions
218 """ % (main
.root
.abspath
)
220 mercurial_lib_not_found
= """
221 Mercurial libraries cannot be found, ignoring style hook. If
222 you are a gem5 developer, please fix this and run the style
223 hook. It is important.
226 # Check for style hook and prompt for installation if it's not there.
227 # Skip this if --ignore-style was specified, there's no .hg dir to
228 # install a hook in, or there's no interactive terminal to prompt.
229 if not GetOption('ignore_style') and hgdir
.exists() and sys
.stdin
.isatty():
232 from mercurial
import ui
234 ui
.readconfig(hgdir
.File('hgrc').abspath
)
235 style_hook
= ui
.config('hooks', 'pretxncommit.style', None) and \
236 ui
.config('hooks', 'pre-qrefresh.style', None)
238 print mercurial_lib_not_found
241 print mercurial_style_message
,
242 # continue unless user does ctrl-c/ctrl-d etc.
246 print "Input exception, exiting scons.\n"
248 hgrc_path
= '%s/.hg/hgrc' % main
.root
.abspath
249 print "Adding style hook to", hgrc_path
, "\n"
251 hgrc
= open(hgrc_path
, 'a')
252 hgrc
.write(mercurial_style_hook
)
255 print "Error updating", hgrc_path
259 ###################################################
261 # Figure out which configurations to set up based on the path(s) of
264 ###################################################
266 # Find default configuration & binary.
267 Default(environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
269 # helper function: find last occurrence of element in list
270 def rfind(l
, elt
, offs
= -1):
271 for i
in range(len(l
)+offs
, 0, -1):
274 raise ValueError, "element not found"
276 # Take a list of paths (or SCons Nodes) and return a list with all
277 # paths made absolute and ~-expanded. Paths will be interpreted
278 # relative to the launch directory unless a different root is provided
279 def makePathListAbsolute(path_list
, root
=GetLaunchDir()):
280 return [abspath(joinpath(root
, expanduser(str(p
))))
283 # Each target must have 'build' in the interior of the path; the
284 # directory below this will determine the build parameters. For
285 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
286 # recognize that ALPHA_SE specifies the configuration because it
287 # follow 'build' in the build path.
289 # The funky assignment to "[:]" is needed to replace the list contents
290 # in place rather than reassign the symbol to a new list, which
291 # doesn't work (obviously!).
292 BUILD_TARGETS
[:] = makePathListAbsolute(BUILD_TARGETS
)
294 # Generate a list of the unique build roots and configs that the
295 # collected targets reference.
298 for t
in BUILD_TARGETS
:
299 path_dirs
= t
.split('/')
301 build_top
= rfind(path_dirs
, 'build', -2)
303 print "Error: no non-leaf 'build' dir found on target path", t
305 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
307 build_root
= this_build_root
309 if this_build_root
!= build_root
:
310 print "Error: build targets not under same build root\n"\
311 " %s\n %s" % (build_root
, this_build_root
)
313 variant_path
= joinpath('/',*path_dirs
[:build_top
+2])
314 if variant_path
not in variant_paths
:
315 variant_paths
.append(variant_path
)
317 # Make sure build_root exists (might not if this is the first build there)
318 if not isdir(build_root
):
320 main
['BUILDROOT'] = build_root
324 main
.SConsignFile(joinpath(build_root
, "sconsign"))
326 # Default duplicate option is to use hard links, but this messes up
327 # when you use emacs to edit a file in the target dir, as emacs moves
328 # file to file~ then copies to file, breaking the link. Symbolic
329 # (soft) links work better.
330 main
.SetOption('duplicate', 'soft-copy')
333 # Set up global sticky variables... these are common to an entire build
334 # tree (not specific to a particular build like ALPHA_SE)
337 global_vars_file
= joinpath(build_root
, 'variables.global')
339 global_vars
= Variables(global_vars_file
, args
=ARGUMENTS
)
341 global_vars
.AddVariables(
342 ('CC', 'C compiler', environ
.get('CC', main
['CC'])),
343 ('CXX', 'C++ compiler', environ
.get('CXX', main
['CXX'])),
344 ('BATCH', 'Use batch pool for build and tests', False),
345 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
346 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
347 ('EXTRAS', 'Add extra directories to the compilation', '')
350 # Update main environment with values from ARGUMENTS & global_vars_file
351 global_vars
.Update(main
)
352 help_texts
["global_vars"] += global_vars
.GenerateHelpText(main
)
354 # Save sticky variable settings back to current variables file
355 global_vars
.Save(global_vars_file
, main
)
357 # Parse EXTRAS variable to build list of all directories where we're
358 # look for sources etc. This list is exported as extras_dir_list.
359 base_dir
= main
.srcdir
.abspath
361 extras_dir_list
= makePathListAbsolute(main
['EXTRAS'].split(':'))
366 Export('extras_dir_list')
368 # the ext directory should be on the #includes path
369 main
.Append(CPPPATH
=[Dir('ext')])
371 def strip_build_path(path
, env
):
373 variant_base
= env
['BUILDROOT'] + os
.path
.sep
374 if path
.startswith(variant_base
):
375 path
= path
[len(variant_base
):]
376 elif path
.startswith('build/'):
380 # Generate a string of the form:
381 # common/path/prefix/src1, src2 -> tgt1, tgt2
382 # to print while building.
383 class Transform(object):
384 # all specific color settings should be here and nowhere else
385 tool_color
= termcap
.Normal
386 pfx_color
= termcap
.Yellow
387 srcs_color
= termcap
.Yellow
+ termcap
.Bold
388 arrow_color
= termcap
.Blue
+ termcap
.Bold
389 tgts_color
= termcap
.Yellow
+ termcap
.Bold
391 def __init__(self
, tool
, max_sources
=99):
392 self
.format
= self
.tool_color
+ (" [%8s] " % tool
) \
393 + self
.pfx_color
+ "%s" \
394 + self
.srcs_color
+ "%s" \
395 + self
.arrow_color
+ " -> " \
396 + self
.tgts_color
+ "%s" \
398 self
.max_sources
= max_sources
400 def __call__(self
, target
, source
, env
, for_signature
=None):
401 # truncate source list according to max_sources param
402 source
= source
[0:self
.max_sources
]
404 return strip_build_path(str(f
), env
)
406 srcs
= map(strip
, source
)
409 tgts
= map(strip
, target
)
410 # surprisingly, os.path.commonprefix is a dumb char-by-char string
411 # operation that has nothing to do with paths.
412 com_pfx
= os
.path
.commonprefix(srcs
+ tgts
)
413 com_pfx_len
= len(com_pfx
)
415 # do some cleanup and sanity checking on common prefix
416 if com_pfx
[-1] == ".":
417 # prefix matches all but file extension: ok
418 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o'
419 com_pfx
= com_pfx
[0:-1]
420 elif com_pfx
[-1] == "/":
421 # common prefix is directory path: OK
424 src0_len
= len(srcs
[0])
425 tgt0_len
= len(tgts
[0])
426 if src0_len
== com_pfx_len
:
427 # source is a substring of target, OK
429 elif tgt0_len
== com_pfx_len
:
430 # target is a substring of source, need to back up to
431 # avoid empty string on RHS of arrow
432 sep_idx
= com_pfx
.rfind(".")
434 com_pfx
= com_pfx
[0:sep_idx
]
437 elif src0_len
> com_pfx_len
and srcs
[0][com_pfx_len
] == ".":
438 # still splitting at file extension: ok
441 # probably a fluke; ignore it
443 # recalculate length in case com_pfx was modified
444 com_pfx_len
= len(com_pfx
)
446 f
= map(lambda s
: s
[com_pfx_len
:], files
)
448 return self
.format
% (com_pfx
, fmt(srcs
), fmt(tgts
))
453 if GetOption('verbose'):
454 def MakeAction(action
, string
, *args
, **kwargs
):
455 return Action(action
, *args
, **kwargs
)
458 main
['CCCOMSTR'] = Transform("CC")
459 main
['CXXCOMSTR'] = Transform("CXX")
460 main
['ASCOMSTR'] = Transform("AS")
461 main
['SWIGCOMSTR'] = Transform("SWIG")
462 main
['ARCOMSTR'] = Transform("AR", 0)
463 main
['LINKCOMSTR'] = Transform("LINK", 0)
464 main
['RANLIBCOMSTR'] = Transform("RANLIB", 0)
465 main
['M4COMSTR'] = Transform("M4")
466 main
['SHCCCOMSTR'] = Transform("SHCC")
467 main
['SHCXXCOMSTR'] = Transform("SHCXX")
470 CXX_version
= readCommand([main
['CXX'],'--version'], exception
=False)
471 CXX_V
= readCommand([main
['CXX'],'-V'], exception
=False)
473 main
['GCC'] = CXX_version
and CXX_version
.find('g++') >= 0
474 main
['SUNCC'] = CXX_V
and CXX_V
.find('Sun C++') >= 0
475 main
['ICC'] = CXX_V
and CXX_V
.find('Intel') >= 0
476 main
['CLANG'] = CXX_V
and CXX_V
.find('clang') >= 0
477 if main
['GCC'] + main
['SUNCC'] + main
['ICC'] + main
['CLANG'] > 1:
478 print 'Error: How can we have two at the same time?'
481 # Set up default C++ compiler flags
483 main
.Append(CCFLAGS
=['-pipe'])
484 main
.Append(CCFLAGS
=['-fno-strict-aliasing'])
485 main
.Append(CCFLAGS
=['-Wall', '-Wno-sign-compare', '-Wundef'])
486 main
.Append(CXXFLAGS
=['-Wno-deprecated'])
487 # Read the GCC version to check for versions with bugs
488 # Note CCVERSION doesn't work here because it is run with the CC
489 # before we override it from the command line
490 gcc_version
= readCommand([main
['CXX'], '-dumpversion'], exception
=False)
491 main
['GCC_VERSION'] = gcc_version
492 if not compareVersions(gcc_version
, '4.4.1') or \
493 not compareVersions(gcc_version
, '4.4.2'):
494 print 'Info: Tree vectorizer in GCC 4.4.1 & 4.4.2 is buggy, disabling.'
495 main
.Append(CCFLAGS
=['-fno-tree-vectorize'])
497 pass #Fix me... add warning flags once we clean up icc warnings
499 main
.Append(CCFLAGS
=['-Qoption ccfe'])
500 main
.Append(CCFLAGS
=['-features=gcc'])
501 main
.Append(CCFLAGS
=['-features=extensions'])
502 main
.Append(CCFLAGS
=['-library=stlport4'])
503 main
.Append(CCFLAGS
=['-xar'])
504 #main.Append(CCFLAGS=['-instances=semiexplicit'])
506 clang_version_re
= re
.compile(".* version (\d+\.\d+)")
507 clang_version_match
= clang_version_re
.match(CXX_version
)
508 if (clang_version_match
):
509 clang_version
= clang_version_match
.groups()[0]
510 if compareVersions(clang_version
, "2.9") < 0:
511 print 'Error: clang version 2.9 or newer required.'
512 print ' Installed version:', clang_version
515 print 'Error: Unable to determine clang version.'
518 main
.Append(CCFLAGS
=['-pipe'])
519 main
.Append(CCFLAGS
=['-fno-strict-aliasing'])
520 main
.Append(CCFLAGS
=['-Wall', '-Wno-sign-compare', '-Wundef'])
521 main
.Append(CCFLAGS
=['-Wno-tautological-compare'])
522 main
.Append(CCFLAGS
=['-Wno-self-assign'])
524 print 'Error: Don\'t know what compiler options to use for your compiler.'
525 print ' Please fix SConstruct and src/SConscript and try again.'
528 # Set up common yacc/bison flags (needed for Ruby)
529 main
['YACCFLAGS'] = '-d'
530 main
['YACCHXXFILESUFFIX'] = '.hh'
532 # Do this after we save setting back, or else we'll tack on an
533 # extra 'qdo' every time we run scons.
535 main
['CC'] = main
['BATCH_CMD'] + ' ' + main
['CC']
536 main
['CXX'] = main
['BATCH_CMD'] + ' ' + main
['CXX']
537 main
['AS'] = main
['BATCH_CMD'] + ' ' + main
['AS']
538 main
['AR'] = main
['BATCH_CMD'] + ' ' + main
['AR']
539 main
['RANLIB'] = main
['BATCH_CMD'] + ' ' + main
['RANLIB']
541 if sys
.platform
== 'cygwin':
542 # cygwin has some header file issues...
543 main
.Append(CCFLAGS
=["-Wno-uninitialized"])
546 if not main
.has_key('SWIG'):
547 print 'Error: SWIG utility not found.'
548 print ' Please install (see http://www.swig.org) and retry.'
551 # Check for appropriate SWIG version
552 swig_version
= readCommand(('swig', '-version'), exception
='').split()
553 # First 3 words should be "SWIG Version x.y.z"
554 if len(swig_version
) < 3 or \
555 swig_version
[0] != 'SWIG' or swig_version
[1] != 'Version':
556 print 'Error determining SWIG version.'
559 min_swig_version
= '1.3.28'
560 if compareVersions(swig_version
[2], min_swig_version
) < 0:
561 print 'Error: SWIG version', min_swig_version
, 'or newer required.'
562 print ' Installed version:', swig_version
[2]
565 # Set up SWIG flags & scanner
566 swig_flags
=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS')
567 main
.Append(SWIGFLAGS
=swig_flags
)
569 # filter out all existing swig scanners, they mess up the dependency
570 # stuff for some reason
572 for scanner
in main
['SCANNERS']:
573 skeys
= scanner
.skeys
577 if isinstance(skeys
, (list, tuple)) and '.i' in skeys
:
580 scanners
.append(scanner
)
582 # add the new swig scanner that we like better
583 from SCons
.Scanner
import ClassicCPP
as CPPScanner
584 swig_inc_re
= '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
585 scanners
.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re
))
587 # replace the scanners list that has what we want
588 main
['SCANNERS'] = scanners
590 # Add a custom Check function to the Configure context so that we can
591 # figure out if the compiler adds leading underscores to global
592 # variables. This is needed for the autogenerated asm files that we
593 # use for embedding the python code.
594 def CheckLeading(context
):
595 context
.Message("Checking for leading underscore in global variables...")
596 # 1) Define a global variable called x from asm so the C compiler
597 # won't change the symbol at all.
598 # 2) Declare that variable.
599 # 3) Use the variable
601 # If the compiler prepends an underscore, this will successfully
602 # link because the external symbol 'x' will be called '_x' which
603 # was defined by the asm statement. If the compiler does not
604 # prepend an underscore, this will not successfully link because
605 # '_x' will have been defined by assembly, while the C portion of
606 # the code will be trying to use 'x'
607 ret
= context
.TryLink('''
608 asm(".globl _x; _x: .byte 0");
610 int main() { return x; }
612 context
.env
.Append(LEADING_UNDERSCORE
=ret
)
616 # Platform-specific configuration. Note again that we assume that all
617 # builds under a given build root run on the same host platform.
618 conf
= Configure(main
,
619 conf_dir
= joinpath(build_root
, '.scons_config'),
620 log_file
= joinpath(build_root
, 'scons_config.log'),
621 custom_tests
= { 'CheckLeading' : CheckLeading
})
623 # Check for leading underscores. Don't really need to worry either
624 # way so don't need to check the return code.
627 # Check if we should compile a 64 bit binary on Mac OS X/Darwin
630 uname
= platform
.uname()
631 if uname
[0] == 'Darwin' and compareVersions(uname
[2], '9.0.0') >= 0:
632 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
633 main
.Append(CCFLAGS
=['-arch', 'x86_64'])
634 main
.Append(CFLAGS
=['-arch', 'x86_64'])
635 main
.Append(LINKFLAGS
=['-arch', 'x86_64'])
636 main
.Append(ASFLAGS
=['-arch', 'x86_64'])
640 # Recent versions of scons substitute a "Null" object for Configure()
641 # when configuration isn't necessary, e.g., if the "--help" option is
642 # present. Unfortuantely this Null object always returns false,
643 # breaking all our configuration checks. We replace it with our own
644 # more optimistic null object that returns True instead.
646 def NullCheck(*args
, **kwargs
):
650 def __init__(self
, env
):
654 def __getattr__(self
, mname
):
657 conf
= NullConf(main
)
659 # Find Python include and library directories for embedding the
660 # interpreter. For consistency, we will use the same Python
661 # installation used to run scons (and thus this script). If you want
662 # to link in an alternate version, see above for instructions on how
663 # to invoke scons with a different copy of the Python interpreter.
664 from distutils
import sysconfig
666 py_getvar
= sysconfig
.get_config_var
668 py_debug
= getattr(sys
, 'pydebug', False)
669 py_version
= 'python' + py_getvar('VERSION') + (py_debug
and "_d" or "")
671 py_general_include
= sysconfig
.get_python_inc()
672 py_platform_include
= sysconfig
.get_python_inc(plat_specific
=True)
673 py_includes
= [ py_general_include
]
674 if py_platform_include
!= py_general_include
:
675 py_includes
.append(py_platform_include
)
677 py_lib_path
= [ py_getvar('LIBDIR') ]
678 # add the prefix/lib/pythonX.Y/config dir, but only if there is no
679 # shared library in prefix/lib/.
680 if not py_getvar('Py_ENABLE_SHARED'):
681 py_lib_path
.append(py_getvar('LIBPL'))
684 for lib
in py_getvar('LIBS').split() + py_getvar('SYSLIBS').split():
685 if not lib
.startswith('-l'):
686 # Python requires some special flags to link (e.g. -framework
687 # common on OS X systems), assume appending preserves order
688 main
.Append(LINKFLAGS
=[lib
])
691 if lib
not in py_libs
:
693 py_libs
.append(py_version
)
695 main
.Append(CPPPATH
=py_includes
)
696 main
.Append(LIBPATH
=py_lib_path
)
698 # Cache build files in the supplied directory.
699 if main
['M5_BUILD_CACHE']:
700 print 'Using build cache located at', main
['M5_BUILD_CACHE']
701 CacheDir(main
['M5_BUILD_CACHE'])
704 # verify that this stuff works
705 if not conf
.CheckHeader('Python.h', '<>'):
706 print "Error: can't find Python.h header in", py_includes
710 if not conf
.CheckLib(lib
):
711 print "Error: can't find library %s required by python" % lib
714 # On Solaris you need to use libsocket for socket ops
715 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
716 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
717 print "Can't find library with socket calls (e.g. accept())"
720 # Check for zlib. If the check passes, libz will be automatically
721 # added to the LIBS environment variable.
722 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
723 print 'Error: did not find needed zlib compression library '\
724 'and/or zlib.h header file.'
725 print ' Please install zlib and try again.'
730 conf
.CheckLibWithHeader(None, 'time.h', 'C',
731 'clock_nanosleep(0,0,NULL,NULL);') or \
732 conf
.CheckLibWithHeader('rt', 'time.h', 'C',
733 'clock_nanosleep(0,0,NULL,NULL);')
735 if not have_posix_clock
:
736 print "Can't find library for POSIX clocks."
738 # Check for <fenv.h> (C99 FP environment control)
739 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
741 print "Warning: Header file <fenv.h> not found."
742 print " This host has no IEEE FP rounding mode control."
744 ######################################################################
746 # Finish the configuration
750 ######################################################################
752 # Collect all non-global variables
755 # Define the universe of supported ISAs
757 Export('all_isa_list')
759 class CpuModel(object):
760 '''The CpuModel class encapsulates everything the ISA parser needs to
761 know about a particular CPU model.'''
763 # Dict of available CPU model objects. Accessible as CpuModel.dict.
768 # Constructor. Automatically adds models to CpuModel.dict.
769 def __init__(self
, name
, filename
, includes
, strings
, default
=False):
770 self
.name
= name
# name of model
771 self
.filename
= filename
# filename for output exec code
772 self
.includes
= includes
# include files needed in exec file
773 # The 'strings' dict holds all the per-CPU symbols we can
774 # substitute into templates etc.
775 self
.strings
= strings
777 # This cpu is enabled by default
778 self
.default
= default
781 if name
in CpuModel
.dict:
782 raise AttributeError, "CpuModel '%s' already registered" % name
783 CpuModel
.dict[name
] = self
784 CpuModel
.list.append(name
)
788 # Sticky variables get saved in the variables file so they persist from
789 # one invocation to the next (unless overridden, in which case the new
790 # value becomes sticky).
791 sticky_vars
= Variables(args
=ARGUMENTS
)
792 Export('sticky_vars')
794 # Sticky variables that should be exported
796 Export('export_vars')
798 # Walk the tree and execute all SConsopts scripts that wil add to the
800 if not GetOption('verbose'):
801 print "Reading SConsopts"
802 for bdir
in [ base_dir
] + extras_dir_list
:
804 print "Error: directory '%s' does not exist" % bdir
806 for root
, dirs
, files
in os
.walk(bdir
):
807 if 'SConsopts' in files
:
808 if GetOption('verbose'):
809 print "Reading", joinpath(root
, 'SConsopts')
810 SConscript(joinpath(root
, 'SConsopts'))
814 sticky_vars
.AddVariables(
815 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list
),
816 ListVariable('CPU_MODELS', 'CPU models',
817 sorted(n
for n
,m
in CpuModel
.dict.iteritems() if m
.default
),
818 sorted(CpuModel
.list)),
819 BoolVariable('NO_FAST_ALLOC', 'Disable fast object allocator', False),
820 BoolVariable('FORCE_FAST_ALLOC',
821 'Enable fast object allocator, even for m5.debug', False),
822 BoolVariable('FAST_ALLOC_STATS', 'Enable fast object allocator statistics',
824 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
826 BoolVariable('SS_COMPATIBLE_FP',
827 'Make floating-point results compatible with SimpleScalar',
829 BoolVariable('USE_SSE2',
830 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
832 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock
),
833 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
834 BoolVariable('USE_CHECKER', 'Use checker for detailed CPU models', False),
835 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False),
838 # These variables get exported to #defines in config/*.hh (see src/SConscript).
839 export_vars
+= ['USE_FENV', 'NO_FAST_ALLOC', 'FORCE_FAST_ALLOC',
840 'FAST_ALLOC_STATS', 'SS_COMPATIBLE_FP', 'USE_CHECKER',
841 'TARGET_ISA', 'CP_ANNOTATE', 'USE_POSIX_CLOCK' ]
843 ###################################################
845 # Define a SCons builder for configuration flag headers.
847 ###################################################
849 # This function generates a config header file that #defines the
850 # variable symbol to the current variable setting (0 or 1). The source
851 # operands are the name of the variable and a Value node containing the
852 # value of the variable.
853 def build_config_file(target
, source
, env
):
854 (variable
, value
) = [s
.get_contents() for s
in source
]
855 f
= file(str(target
[0]), 'w')
856 print >> f
, '#define', variable
, value
860 # Combine the two functions into a scons Action object.
861 config_action
= MakeAction(build_config_file
, Transform("CONFIG H", 2))
863 # The emitter munges the source & target node lists to reflect what
864 # we're really doing.
865 def config_emitter(target
, source
, env
):
866 # extract variable name from Builder arg
867 variable
= str(target
[0])
868 # True target is config header file
869 target
= joinpath('config', variable
.lower() + '.hh')
871 if isinstance(val
, bool):
874 elif isinstance(val
, str):
875 val
= '"' + val
+ '"'
877 # Sources are variable name & value (packaged in SCons Value nodes)
878 return ([target
], [Value(variable
), Value(val
)])
880 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
882 main
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
884 # libelf build is shared across all configs in the build root.
885 main
.SConscript('ext/libelf/SConscript',
886 variant_dir
= joinpath(build_root
, 'libelf'))
888 # gzstream build is shared across all configs in the build root.
889 main
.SConscript('ext/gzstream/SConscript',
890 variant_dir
= joinpath(build_root
, 'gzstream'))
892 ###################################################
894 # This function is used to set up a directory with switching headers
896 ###################################################
898 main
['ALL_ISA_LIST'] = all_isa_list
899 def make_switching_dir(dname
, switch_headers
, env
):
900 # Generate the header. target[0] is the full path of the output
901 # header to generate. 'source' is a dummy variable, since we get the
902 # list of ISAs from env['ALL_ISA_LIST'].
903 def gen_switch_hdr(target
, source
, env
):
904 fname
= str(target
[0])
906 isa
= env
['TARGET_ISA'].lower()
907 print >>f
, '#include "%s/%s/%s"' % (dname
, isa
, basename(fname
))
910 # Build SCons Action object. 'varlist' specifies env vars that this
911 # action depends on; when env['ALL_ISA_LIST'] changes these actions
912 # should get re-executed.
913 switch_hdr_action
= MakeAction(gen_switch_hdr
,
914 Transform("GENERATE"), varlist
=['ALL_ISA_LIST'])
916 # Instantiate actions for each header
917 for hdr
in switch_headers
:
918 env
.Command(hdr
, [], switch_hdr_action
)
919 Export('make_switching_dir')
921 ###################################################
923 # Define build environments for selected configurations.
925 ###################################################
927 for variant_path
in variant_paths
:
928 print "Building in", variant_path
930 # Make a copy of the build-root environment to use for this config.
932 env
['BUILDDIR'] = variant_path
934 # variant_dir is the tail component of build path, and is used to
935 # determine the build parameters (e.g., 'ALPHA_SE')
936 (build_root
, variant_dir
) = splitpath(variant_path
)
938 # Set env variables according to the build directory config.
939 sticky_vars
.files
= []
940 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
941 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
942 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
943 current_vars_file
= joinpath(build_root
, 'variables', variant_dir
)
944 if isfile(current_vars_file
):
945 sticky_vars
.files
.append(current_vars_file
)
946 print "Using saved variables file %s" % current_vars_file
948 # Build dir-specific variables file doesn't exist.
950 # Make sure the directory is there so we can create it later
951 opt_dir
= dirname(current_vars_file
)
952 if not isdir(opt_dir
):
955 # Get default build variables from source tree. Variables are
956 # normally determined by name of $VARIANT_DIR, but can be
957 # overridden by '--default=' arg on command line.
958 default
= GetOption('default')
959 opts_dir
= joinpath(main
.root
.abspath
, 'build_opts')
961 default_vars_files
= [joinpath(build_root
, 'variables', default
),
962 joinpath(opts_dir
, default
)]
964 default_vars_files
= [joinpath(opts_dir
, variant_dir
)]
965 existing_files
= filter(isfile
, default_vars_files
)
967 default_vars_file
= existing_files
[0]
968 sticky_vars
.files
.append(default_vars_file
)
969 print "Variables file %s not found,\n using defaults in %s" \
970 % (current_vars_file
, default_vars_file
)
972 print "Error: cannot find variables file %s or " \
973 "default file(s) %s" \
974 % (current_vars_file
, ' or '.join(default_vars_files
))
977 # Apply current variable settings to env
978 sticky_vars
.Update(env
)
980 help_texts
["local_vars"] += \
981 "Build variables for %s:\n" % variant_dir \
982 + sticky_vars
.GenerateHelpText(env
)
984 # Process variable settings.
986 if not have_fenv
and env
['USE_FENV']:
987 print "Warning: <fenv.h> not available; " \
988 "forcing USE_FENV to False in", variant_dir
+ "."
989 env
['USE_FENV'] = False
991 if not env
['USE_FENV']:
992 print "Warning: No IEEE FP rounding mode control in", variant_dir
+ "."
993 print " FP results may deviate slightly from other platforms."
996 env
.Append(LIBS
=['efence'])
998 # Save sticky variable settings back to current variables file
999 sticky_vars
.Save(current_vars_file
, env
)
1002 env
.Append(CCFLAGS
=['-msse2'])
1004 # The src/SConscript file sets up the build rules in 'env' according
1005 # to the configured variables. It returns a list of environments,
1006 # one for each variant build (debug, opt, etc.)
1007 envList
= SConscript('src/SConscript', variant_dir
= variant_path
,
1010 # Set up the regression tests for each build.
1012 SConscript('tests/SConscript',
1013 variant_dir
= joinpath(variant_path
, 'tests', e
.Label
),
1014 exports
= { 'env' : e
}, duplicate
= False)
1018 Usage: scons [scons options] [build variables] [target(s)]
1020 Extra scons options:
1023 Global build variables: