3 # Copyright (c) 2013 ARM Limited
6 # The license below extends only to copyright in the software and shall
7 # not be construed as granting a license to any other intellectual
8 # property including but not limited to intellectual property relating
9 # to a hardware implementation of the functionality of the software
10 # licensed hereunder. You may use the software subject to the license
11 # terms below provided that you ensure that this notice is replicated
12 # unmodified and in its entirety in all distributions of the software,
13 # modified or unmodified, in source code or in binary form.
15 # Copyright (c) 2011 Advanced Micro Devices, Inc.
16 # Copyright (c) 2009 The Hewlett-Packard Development Company
17 # Copyright (c) 2004-2005 The Regents of The University of Michigan
18 # All rights reserved.
20 # Redistribution and use in source and binary forms, with or without
21 # modification, are permitted provided that the following conditions are
22 # met: redistributions of source code must retain the above copyright
23 # notice, this list of conditions and the following disclaimer;
24 # redistributions in binary form must reproduce the above copyright
25 # notice, this list of conditions and the following disclaimer in the
26 # documentation and/or other materials provided with the distribution;
27 # neither the name of the copyright holders nor the names of its
28 # contributors may be used to endorse or promote products derived from
29 # this software without specific prior written permission.
31 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
36 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
37 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
41 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 # Authors: Steve Reinhardt
46 ###################################################
48 # SCons top-level build description (SConstruct) file.
50 # While in this directory ('gem5'), just type 'scons' to build the default
51 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
52 # to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
53 # the optimized full-system version).
55 # You can build gem5 in a different directory as long as there is a
56 # 'build/<CONFIG>' somewhere along the target path. The build system
57 # expects that all configs under the same build directory are being
58 # built for the same host system.
62 # The following two commands are equivalent. The '-u' option tells
63 # scons to search up the directory tree for this SConstruct file.
64 # % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
65 # % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
67 # The following two commands are equivalent and demonstrate building
68 # in a directory outside of the source tree. The '-C' option tells
69 # scons to chdir to the specified directory to find this SConstruct
71 # % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
72 # % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
74 # You can use 'scons -H' to print scons options. If you're in this
75 # 'gem5' directory (or use -u or -C to tell scons where to find this
76 # file), you can use 'scons -h' to print all the gem5-specific build
79 ###################################################
81 # Check for recent-enough Python and SCons versions.
83 # Really old versions of scons only take two options for the
84 # function, so check once without the revision and once with the
85 # revision, the first instance will fail for stuff other than
86 # 0.98, and the second will fail for 0.98.0
87 EnsureSConsVersion(0, 98)
88 EnsureSConsVersion(0, 98, 1)
91 For more details, see:
92 http://gem5.org/Dependencies
96 # We ensure the python version early because because python-config
99 EnsurePythonVersion(2, 5)
100 except SystemExit, e
:
102 You can use a non-default installation of the Python interpreter by
103 rearranging your PATH so that scons finds the non-default 'python' and
104 'python-config' first.
106 For more details, see:
107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation
111 # Global Python includes
118 from os
import mkdir
, environ
119 from os
.path
import abspath
, basename
, dirname
, expanduser
, normpath
120 from os
.path
import exists
, isdir
, isfile
121 from os
.path
import join
as joinpath
, split
as splitpath
127 extra_python_paths
= [
128 Dir('src/python').srcnode().abspath
, # gem5 includes
129 Dir('ext/ply').srcnode().abspath
, # ply is used by several files
132 sys
.path
[1:1] = extra_python_paths
134 from m5
.util
import compareVersions
, readCommand
135 from m5
.util
.terminal
import get_termcap
146 # There's a bug in scons in that (1) by default, the help texts from
147 # AddOption() are supposed to be displayed when you type 'scons -h'
148 # and (2) you can override the help displayed by 'scons -h' using the
149 # Help() function, but these two features are incompatible: once
150 # you've overridden the help text using Help(), there's no way to get
151 # at the help texts from AddOptions. See:
152 # http://scons.tigris.org/issues/show_bug.cgi?id=2356
153 # http://scons.tigris.org/issues/show_bug.cgi?id=2611
154 # This hack lets us extract the help text from AddOptions and
155 # re-inject it via Help(). Ideally someday this bug will be fixed and
156 # we can just use AddOption directly.
157 def AddLocalOption(*args
, **kwargs
):
160 help = " " + ", ".join(args
)
163 if length
>= col_width
:
164 help += "\n" + " " * col_width
166 help += " " * (col_width
- length
)
167 help += kwargs
["help"]
168 help_texts
["options"] += help + "\n"
170 AddOption(*args
, **kwargs
)
172 AddLocalOption('--colors', dest
='use_colors', action
='store_true',
173 help="Add color to abbreviated scons output")
174 AddLocalOption('--no-colors', dest
='use_colors', action
='store_false',
175 help="Don't add color to abbreviated scons output")
176 AddLocalOption('--with-cxx-config', dest
='with_cxx_config',
178 help="Build with support for C++-based configuration")
179 AddLocalOption('--default', dest
='default', type='string', action
='store',
180 help='Override which build_opts file to use for defaults')
181 AddLocalOption('--ignore-style', dest
='ignore_style', action
='store_true',
182 help='Disable style checking hooks')
183 AddLocalOption('--no-lto', dest
='no_lto', action
='store_true',
184 help='Disable Link-Time Optimization for fast')
185 AddLocalOption('--update-ref', dest
='update_ref', action
='store_true',
186 help='Update test reference outputs')
187 AddLocalOption('--verbose', dest
='verbose', action
='store_true',
188 help='Print full tool command lines')
189 AddLocalOption('--without-python', dest
='without_python',
191 help='Build without Python configuration support')
192 AddLocalOption('--without-tcmalloc', dest
='without_tcmalloc',
194 help='Disable linking against tcmalloc')
195 AddLocalOption('--with-ubsan', dest
='with_ubsan', action
='store_true',
196 help='Build with Undefined Behavior Sanitizer if available')
198 termcap
= get_termcap(GetOption('use_colors'))
200 ########################################################################
202 # Set up the main build environment.
204 ########################################################################
206 # export TERM so that clang reports errors in color
207 use_vars
= set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH',
208 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC',
209 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ])
212 "M5", # M5 configuration (e.g., path to kernels)
213 "DISTCC_", # distcc (distributed compiler wrapper) configuration
214 "CCACHE_", # ccache (caching compiler wrapper) configuration
215 "CCC_", # clang static analyzer configuration
219 for key
,val
in sorted(os
.environ
.iteritems()):
220 if key
in use_vars
or \
221 any([key
.startswith(prefix
) for prefix
in use_prefixes
]):
224 # Tell scons to avoid implicit command dependencies to avoid issues
225 # with the param wrappes being compiled twice (see
226 # http://scons.tigris.org/issues/show_bug.cgi?id=2811)
227 main
= Environment(ENV
=use_env
, IMPLICIT_COMMAND_DEPENDENCIES
=0)
228 main
.Decider('MD5-timestamp')
229 main
.root
= Dir(".") # The current directory (where this file lives).
230 main
.srcdir
= Dir("src") # The source directory
232 main_dict_keys
= main
.Dictionary().keys()
234 # Check that we have a C/C++ compiler
235 if not ('CC' in main_dict_keys
and 'CXX' in main_dict_keys
):
236 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)"
239 # Check that swig is present
240 if not 'SWIG' in main_dict_keys
:
241 print "swig is not installed (package swig on Ubuntu and RedHat)"
244 # add useful python code PYTHONPATH so it can be used by subprocesses
246 main
.AppendENVPath('PYTHONPATH', extra_python_paths
)
248 ########################################################################
252 # If the gem5 directory is a mercurial repository, we should do some
255 ########################################################################
257 hgdir
= main
.root
.Dir(".hg")
259 mercurial_style_message
= """
260 You're missing the gem5 style hook, which automatically checks your code
261 against the gem5 style rules on hg commit and qrefresh commands. This
262 script will now install the hook in your .hg/hgrc file.
263 Press enter to continue, or ctrl-c to abort: """
265 mercurial_style_hook
= """
266 # The following lines were automatically added by gem5/SConstruct
267 # to provide the gem5 style-checking hooks
269 style = %s/util/style.py
272 pretxncommit.style = python:style.check_style
273 pre-qrefresh.style = python:style.check_style
274 # End of SConstruct additions
276 """ % (main
.root
.abspath
)
278 mercurial_lib_not_found
= """
279 Mercurial libraries cannot be found, ignoring style hook. If
280 you are a gem5 developer, please fix this and run the style
281 hook. It is important.
284 # Check for style hook and prompt for installation if it's not there.
285 # Skip this if --ignore-style was specified, there's no .hg dir to
286 # install a hook in, or there's no interactive terminal to prompt.
287 if not GetOption('ignore_style') and hgdir
.exists() and sys
.stdin
.isatty():
290 from mercurial
import ui
292 ui
.readconfig(hgdir
.File('hgrc').abspath
)
293 style_hook
= ui
.config('hooks', 'pretxncommit.style', None) and \
294 ui
.config('hooks', 'pre-qrefresh.style', None)
296 print mercurial_lib_not_found
299 print mercurial_style_message
,
300 # continue unless user does ctrl-c/ctrl-d etc.
304 print "Input exception, exiting scons.\n"
306 hgrc_path
= '%s/.hg/hgrc' % main
.root
.abspath
307 print "Adding style hook to", hgrc_path
, "\n"
309 hgrc
= open(hgrc_path
, 'a')
310 hgrc
.write(mercurial_style_hook
)
313 print "Error updating", hgrc_path
317 ###################################################
319 # Figure out which configurations to set up based on the path(s) of
322 ###################################################
324 # Find default configuration & binary.
325 Default(environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
327 # helper function: find last occurrence of element in list
328 def rfind(l
, elt
, offs
= -1):
329 for i
in range(len(l
)+offs
, 0, -1):
332 raise ValueError, "element not found"
334 # Take a list of paths (or SCons Nodes) and return a list with all
335 # paths made absolute and ~-expanded. Paths will be interpreted
336 # relative to the launch directory unless a different root is provided
337 def makePathListAbsolute(path_list
, root
=GetLaunchDir()):
338 return [abspath(joinpath(root
, expanduser(str(p
))))
341 # Each target must have 'build' in the interior of the path; the
342 # directory below this will determine the build parameters. For
343 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
344 # recognize that ALPHA_SE specifies the configuration because it
345 # follow 'build' in the build path.
347 # The funky assignment to "[:]" is needed to replace the list contents
348 # in place rather than reassign the symbol to a new list, which
349 # doesn't work (obviously!).
350 BUILD_TARGETS
[:] = makePathListAbsolute(BUILD_TARGETS
)
352 # Generate a list of the unique build roots and configs that the
353 # collected targets reference.
356 for t
in BUILD_TARGETS
:
357 path_dirs
= t
.split('/')
359 build_top
= rfind(path_dirs
, 'build', -2)
361 print "Error: no non-leaf 'build' dir found on target path", t
363 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
365 build_root
= this_build_root
367 if this_build_root
!= build_root
:
368 print "Error: build targets not under same build root\n"\
369 " %s\n %s" % (build_root
, this_build_root
)
371 variant_path
= joinpath('/',*path_dirs
[:build_top
+2])
372 if variant_path
not in variant_paths
:
373 variant_paths
.append(variant_path
)
375 # Make sure build_root exists (might not if this is the first build there)
376 if not isdir(build_root
):
378 main
['BUILDROOT'] = build_root
382 main
.SConsignFile(joinpath(build_root
, "sconsign"))
384 # Default duplicate option is to use hard links, but this messes up
385 # when you use emacs to edit a file in the target dir, as emacs moves
386 # file to file~ then copies to file, breaking the link. Symbolic
387 # (soft) links work better.
388 main
.SetOption('duplicate', 'soft-copy')
391 # Set up global sticky variables... these are common to an entire build
392 # tree (not specific to a particular build like ALPHA_SE)
395 global_vars_file
= joinpath(build_root
, 'variables.global')
397 global_vars
= Variables(global_vars_file
, args
=ARGUMENTS
)
399 global_vars
.AddVariables(
400 ('CC', 'C compiler', environ
.get('CC', main
['CC'])),
401 ('CXX', 'C++ compiler', environ
.get('CXX', main
['CXX'])),
402 ('SWIG', 'SWIG tool', environ
.get('SWIG', main
['SWIG'])),
403 ('PROTOC', 'protoc tool', environ
.get('PROTOC', 'protoc')),
404 ('BATCH', 'Use batch pool for build and tests', False),
405 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
406 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
407 ('EXTRAS', 'Add extra directories to the compilation', '')
410 # Update main environment with values from ARGUMENTS & global_vars_file
411 global_vars
.Update(main
)
412 help_texts
["global_vars"] += global_vars
.GenerateHelpText(main
)
414 # Save sticky variable settings back to current variables file
415 global_vars
.Save(global_vars_file
, main
)
417 # Parse EXTRAS variable to build list of all directories where we're
418 # look for sources etc. This list is exported as extras_dir_list.
419 base_dir
= main
.srcdir
.abspath
421 extras_dir_list
= makePathListAbsolute(main
['EXTRAS'].split(':'))
426 Export('extras_dir_list')
428 # the ext directory should be on the #includes path
429 main
.Append(CPPPATH
=[Dir('ext')])
431 def strip_build_path(path
, env
):
433 variant_base
= env
['BUILDROOT'] + os
.path
.sep
434 if path
.startswith(variant_base
):
435 path
= path
[len(variant_base
):]
436 elif path
.startswith('build/'):
440 # Generate a string of the form:
441 # common/path/prefix/src1, src2 -> tgt1, tgt2
442 # to print while building.
443 class Transform(object):
444 # all specific color settings should be here and nowhere else
445 tool_color
= termcap
.Normal
446 pfx_color
= termcap
.Yellow
447 srcs_color
= termcap
.Yellow
+ termcap
.Bold
448 arrow_color
= termcap
.Blue
+ termcap
.Bold
449 tgts_color
= termcap
.Yellow
+ termcap
.Bold
451 def __init__(self
, tool
, max_sources
=99):
452 self
.format
= self
.tool_color
+ (" [%8s] " % tool
) \
453 + self
.pfx_color
+ "%s" \
454 + self
.srcs_color
+ "%s" \
455 + self
.arrow_color
+ " -> " \
456 + self
.tgts_color
+ "%s" \
458 self
.max_sources
= max_sources
460 def __call__(self
, target
, source
, env
, for_signature
=None):
461 # truncate source list according to max_sources param
462 source
= source
[0:self
.max_sources
]
464 return strip_build_path(str(f
), env
)
466 srcs
= map(strip
, source
)
469 tgts
= map(strip
, target
)
470 # surprisingly, os.path.commonprefix is a dumb char-by-char string
471 # operation that has nothing to do with paths.
472 com_pfx
= os
.path
.commonprefix(srcs
+ tgts
)
473 com_pfx_len
= len(com_pfx
)
475 # do some cleanup and sanity checking on common prefix
476 if com_pfx
[-1] == ".":
477 # prefix matches all but file extension: ok
478 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o'
479 com_pfx
= com_pfx
[0:-1]
480 elif com_pfx
[-1] == "/":
481 # common prefix is directory path: OK
484 src0_len
= len(srcs
[0])
485 tgt0_len
= len(tgts
[0])
486 if src0_len
== com_pfx_len
:
487 # source is a substring of target, OK
489 elif tgt0_len
== com_pfx_len
:
490 # target is a substring of source, need to back up to
491 # avoid empty string on RHS of arrow
492 sep_idx
= com_pfx
.rfind(".")
494 com_pfx
= com_pfx
[0:sep_idx
]
497 elif src0_len
> com_pfx_len
and srcs
[0][com_pfx_len
] == ".":
498 # still splitting at file extension: ok
501 # probably a fluke; ignore it
503 # recalculate length in case com_pfx was modified
504 com_pfx_len
= len(com_pfx
)
506 f
= map(lambda s
: s
[com_pfx_len
:], files
)
508 return self
.format
% (com_pfx
, fmt(srcs
), fmt(tgts
))
512 # enable the regression script to use the termcap
513 main
['TERMCAP'] = termcap
515 if GetOption('verbose'):
516 def MakeAction(action
, string
, *args
, **kwargs
):
517 return Action(action
, *args
, **kwargs
)
520 main
['CCCOMSTR'] = Transform("CC")
521 main
['CXXCOMSTR'] = Transform("CXX")
522 main
['ASCOMSTR'] = Transform("AS")
523 main
['SWIGCOMSTR'] = Transform("SWIG")
524 main
['ARCOMSTR'] = Transform("AR", 0)
525 main
['LINKCOMSTR'] = Transform("LINK", 0)
526 main
['RANLIBCOMSTR'] = Transform("RANLIB", 0)
527 main
['M4COMSTR'] = Transform("M4")
528 main
['SHCCCOMSTR'] = Transform("SHCC")
529 main
['SHCXXCOMSTR'] = Transform("SHCXX")
532 # Initialize the Link-Time Optimization (LTO) flags
533 main
['LTO_CCFLAGS'] = []
534 main
['LTO_LDFLAGS'] = []
536 # According to the readme, tcmalloc works best if the compiler doesn't
537 # assume that we're using the builtin malloc and friends. These flags
538 # are compiler-specific, so we need to set them after we detect which
539 # compiler we're using.
540 main
['TCMALLOC_CCFLAGS'] = []
542 CXX_version
= readCommand([main
['CXX'],'--version'], exception
=False)
543 CXX_V
= readCommand([main
['CXX'],'-V'], exception
=False)
545 main
['GCC'] = CXX_version
and CXX_version
.find('g++') >= 0
546 main
['CLANG'] = CXX_version
and CXX_version
.find('clang') >= 0
547 if main
['GCC'] + main
['CLANG'] > 1:
548 print 'Error: How can we have two at the same time?'
551 # Set up default C++ compiler flags
552 if main
['GCC'] or main
['CLANG']:
553 # As gcc and clang share many flags, do the common parts here
554 main
.Append(CCFLAGS
=['-pipe'])
555 main
.Append(CCFLAGS
=['-fno-strict-aliasing'])
556 # Enable -Wall and then disable the few warnings that we
557 # consistently violate
558 main
.Append(CCFLAGS
=['-Wall', '-Wno-sign-compare', '-Wundef'])
559 # We always compile using C++11, but only gcc >= 4.7 and clang 3.1
560 # actually use that name, so we stick with c++0x
561 main
.Append(CXXFLAGS
=['-std=c++0x'])
562 # Add selected sanity checks from -Wextra
563 main
.Append(CXXFLAGS
=['-Wmissing-field-initializers',
564 '-Woverloaded-virtual'])
566 print termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
,
567 print "Don't know what compiler options to use for your compiler."
568 print termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX']
569 print termcap
.Yellow
+ ' version:' + termcap
.Normal
,
571 print termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +\
574 print CXX_version
.replace('\n', '<nl>')
575 print " If you're trying to use a compiler other than GCC"
576 print " or clang, there appears to be something wrong with your"
577 print " environment."
579 print " If you are trying to use a compiler other than those listed"
580 print " above you will need to ease fix SConstruct and "
581 print " src/SConscript to support that compiler."
585 # Check for a supported version of gcc. >= 4.6 is chosen for its
586 # level of c++11 support. See
587 # http://gcc.gnu.org/projects/cxx0x.html for details. 4.6 is also
588 # the first version with proper LTO support.
589 gcc_version
= readCommand([main
['CXX'], '-dumpversion'], exception
=False)
590 if compareVersions(gcc_version
, "4.6") < 0:
591 print 'Error: gcc version 4.6 or newer required.'
592 print ' Installed version:', gcc_version
595 main
['GCC_VERSION'] = gcc_version
597 # gcc from version 4.8 and above generates "rep; ret" instructions
598 # to avoid performance penalties on certain AMD chips. Older
599 # assemblers detect this as an error, "Error: expecting string
600 # instruction after `rep'"
601 if compareVersions(gcc_version
, "4.8") > 0:
602 as_version
= readCommand([main
['AS'], '-v', '/dev/null'],
603 exception
=False).split()
605 if not as_version
or compareVersions(as_version
[-1], "2.23") < 0:
606 print termcap
.Yellow
+ termcap
.Bold
+ \
607 'Warning: This combination of gcc and binutils have' + \
608 ' known incompatibilities.\n' + \
609 ' If you encounter build problems, please update ' + \
610 'binutils to 2.23.' + \
613 # Make sure we warn if the user has requested to compile with the
614 # Undefined Benahvior Sanitizer and this version of gcc does not
616 if GetOption('with_ubsan') and \
617 compareVersions(gcc_version
, '4.9') < 0:
618 print termcap
.Yellow
+ termcap
.Bold
+ \
619 'Warning: UBSan is only supported using gcc 4.9 and later.' + \
622 # Add the appropriate Link-Time Optimization (LTO) flags
623 # unless LTO is explicitly turned off. Note that these flags
624 # are only used by the fast target.
625 if not GetOption('no_lto'):
626 # Pass the LTO flag when compiling to produce GIMPLE
627 # output, we merely create the flags here and only append
629 main
['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
631 # Use the same amount of jobs for LTO as we are running
633 main
['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
635 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin-malloc', '-fno-builtin-calloc',
636 '-fno-builtin-realloc', '-fno-builtin-free'])
639 # Check for a supported version of clang, >= 3.0 is needed to
640 # support similar features as gcc 4.6. See
641 # http://clang.llvm.org/cxx_status.html for details
642 clang_version_re
= re
.compile(".* version (\d+\.\d+)")
643 clang_version_match
= clang_version_re
.search(CXX_version
)
644 if (clang_version_match
):
645 clang_version
= clang_version_match
.groups()[0]
646 if compareVersions(clang_version
, "3.0") < 0:
647 print 'Error: clang version 3.0 or newer required.'
648 print ' Installed version:', clang_version
651 print 'Error: Unable to determine clang version.'
654 # clang has a few additional warnings that we disable,
655 # tautological comparisons are allowed due to unsigned integers
656 # being compared to constants that happen to be 0, and extraneous
657 # parantheses are allowed due to Ruby's printing of the AST,
658 # finally self assignments are allowed as the generated CPU code
660 main
.Append(CCFLAGS
=['-Wno-tautological-compare',
663 # Some versions of libstdc++ (4.8?) seem to
664 # use struct hash and class hash
666 '-Wno-mismatched-tags',
669 main
.Append(TCMALLOC_CCFLAGS
=['-fno-builtin'])
671 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
672 # opposed to libstdc++, as the later is dated.
673 if sys
.platform
== "darwin":
674 main
.Append(CXXFLAGS
=['-stdlib=libc++'])
675 main
.Append(LIBS
=['c++'])
678 print termcap
.Yellow
+ termcap
.Bold
+ 'Error' + termcap
.Normal
,
679 print "Don't know what compiler options to use for your compiler."
680 print termcap
.Yellow
+ ' compiler:' + termcap
.Normal
, main
['CXX']
681 print termcap
.Yellow
+ ' version:' + termcap
.Normal
,
683 print termcap
.Yellow
+ termcap
.Bold
+ "COMMAND NOT FOUND!" +\
686 print CXX_version
.replace('\n', '<nl>')
687 print " If you're trying to use a compiler other than GCC"
688 print " or clang, there appears to be something wrong with your"
689 print " environment."
691 print " If you are trying to use a compiler other than those listed"
692 print " above you will need to ease fix SConstruct and "
693 print " src/SConscript to support that compiler."
696 # Set up common yacc/bison flags (needed for Ruby)
697 main
['YACCFLAGS'] = '-d'
698 main
['YACCHXXFILESUFFIX'] = '.hh'
700 # Do this after we save setting back, or else we'll tack on an
701 # extra 'qdo' every time we run scons.
703 main
['CC'] = main
['BATCH_CMD'] + ' ' + main
['CC']
704 main
['CXX'] = main
['BATCH_CMD'] + ' ' + main
['CXX']
705 main
['AS'] = main
['BATCH_CMD'] + ' ' + main
['AS']
706 main
['AR'] = main
['BATCH_CMD'] + ' ' + main
['AR']
707 main
['RANLIB'] = main
['BATCH_CMD'] + ' ' + main
['RANLIB']
709 if sys
.platform
== 'cygwin':
710 # cygwin has some header file issues...
711 main
.Append(CCFLAGS
=["-Wno-uninitialized"])
713 # Check for the protobuf compiler
714 protoc_version
= readCommand([main
['PROTOC'], '--version'],
715 exception
='').split()
717 # First two words should be "libprotoc x.y.z"
718 if len(protoc_version
) < 2 or protoc_version
[0] != 'libprotoc':
719 print termcap
.Yellow
+ termcap
.Bold
+ \
720 'Warning: Protocol buffer compiler (protoc) not found.\n' + \
721 ' Please install protobuf-compiler for tracing support.' + \
723 main
['PROTOC'] = False
725 # Based on the availability of the compress stream wrappers,
727 min_protoc_version
= '2.1.0'
728 if compareVersions(protoc_version
[1], min_protoc_version
) < 0:
729 print termcap
.Yellow
+ termcap
.Bold
+ \
730 'Warning: protoc version', min_protoc_version
, \
731 'or newer required.\n' + \
732 ' Installed version:', protoc_version
[1], \
734 main
['PROTOC'] = False
736 # Attempt to determine the appropriate include path and
737 # library path using pkg-config, that means we also need to
738 # check for pkg-config. Note that it is possible to use
739 # protobuf without the involvement of pkg-config. Later on we
740 # check go a library config check and at that point the test
741 # will fail if libprotobuf cannot be found.
742 if readCommand(['pkg-config', '--version'], exception
=''):
744 # Attempt to establish what linking flags to add for protobuf
746 main
.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
748 print termcap
.Yellow
+ termcap
.Bold
+ \
749 'Warning: pkg-config could not get protobuf flags.' + \
753 if not main
.has_key('SWIG'):
754 print 'Error: SWIG utility not found.'
755 print ' Please install (see http://www.swig.org) and retry.'
758 # Check for appropriate SWIG version
759 swig_version
= readCommand([main
['SWIG'], '-version'], exception
='').split()
760 # First 3 words should be "SWIG Version x.y.z"
761 if len(swig_version
) < 3 or \
762 swig_version
[0] != 'SWIG' or swig_version
[1] != 'Version':
763 print 'Error determining SWIG version.'
766 min_swig_version
= '2.0.4'
767 if compareVersions(swig_version
[2], min_swig_version
) < 0:
768 print 'Error: SWIG version', min_swig_version
, 'or newer required.'
769 print ' Installed version:', swig_version
[2]
772 # Check for known incompatibilities. The standard library shipped with
773 # gcc >= 4.9 does not play well with swig versions prior to 3.0
774 if main
['GCC'] and compareVersions(gcc_version
, '4.9') >= 0 and \
775 compareVersions(swig_version
[2], '3.0') < 0:
776 print termcap
.Yellow
+ termcap
.Bold
+ \
777 'Warning: This combination of gcc and swig have' + \
778 ' known incompatibilities.\n' + \
779 ' If you encounter build problems, please update ' + \
780 'swig to 3.0 or later.' + \
783 # Set up SWIG flags & scanner
784 swig_flags
=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS')
785 main
.Append(SWIGFLAGS
=swig_flags
)
787 # Check for 'timeout' from GNU coreutils. If present, regressions
788 # will be run with a time limit.
789 TIMEOUT_version
= readCommand(['timeout', '--version'], exception
=False)
790 main
['TIMEOUT'] = TIMEOUT_version
and TIMEOUT_version
.find('timeout') == 0
792 # filter out all existing swig scanners, they mess up the dependency
793 # stuff for some reason
795 for scanner
in main
['SCANNERS']:
796 skeys
= scanner
.skeys
800 if isinstance(skeys
, (list, tuple)) and '.i' in skeys
:
803 scanners
.append(scanner
)
805 # add the new swig scanner that we like better
806 from SCons
.Scanner
import ClassicCPP
as CPPScanner
807 swig_inc_re
= '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
808 scanners
.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re
))
810 # replace the scanners list that has what we want
811 main
['SCANNERS'] = scanners
813 # Add a custom Check function to the Configure context so that we can
814 # figure out if the compiler adds leading underscores to global
815 # variables. This is needed for the autogenerated asm files that we
816 # use for embedding the python code.
817 def CheckLeading(context
):
818 context
.Message("Checking for leading underscore in global variables...")
819 # 1) Define a global variable called x from asm so the C compiler
820 # won't change the symbol at all.
821 # 2) Declare that variable.
822 # 3) Use the variable
824 # If the compiler prepends an underscore, this will successfully
825 # link because the external symbol 'x' will be called '_x' which
826 # was defined by the asm statement. If the compiler does not
827 # prepend an underscore, this will not successfully link because
828 # '_x' will have been defined by assembly, while the C portion of
829 # the code will be trying to use 'x'
830 ret
= context
.TryLink('''
831 asm(".globl _x; _x: .byte 0");
833 int main() { return x; }
835 context
.env
.Append(LEADING_UNDERSCORE
=ret
)
839 # Add a custom Check function to test for structure members.
840 def CheckMember(context
, include
, decl
, member
, include_quotes
="<>"):
841 context
.Message("Checking for member %s in %s..." %
847 (void)test.%(member)s;
850 """ % { "header" : include_quotes
[0] + include
+ include_quotes
[1],
855 ret
= context
.TryCompile(text
, extension
=".cc")
859 # Platform-specific configuration. Note again that we assume that all
860 # builds under a given build root run on the same host platform.
861 conf
= Configure(main
,
862 conf_dir
= joinpath(build_root
, '.scons_config'),
863 log_file
= joinpath(build_root
, 'scons_config.log'),
865 'CheckLeading' : CheckLeading
,
866 'CheckMember' : CheckMember
,
869 # Check for leading underscores. Don't really need to worry either
870 # way so don't need to check the return code.
873 # Check if we should compile a 64 bit binary on Mac OS X/Darwin
876 uname
= platform
.uname()
877 if uname
[0] == 'Darwin' and compareVersions(uname
[2], '9.0.0') >= 0:
878 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
879 main
.Append(CCFLAGS
=['-arch', 'x86_64'])
880 main
.Append(CFLAGS
=['-arch', 'x86_64'])
881 main
.Append(LINKFLAGS
=['-arch', 'x86_64'])
882 main
.Append(ASFLAGS
=['-arch', 'x86_64'])
886 # Recent versions of scons substitute a "Null" object for Configure()
887 # when configuration isn't necessary, e.g., if the "--help" option is
888 # present. Unfortuantely this Null object always returns false,
889 # breaking all our configuration checks. We replace it with our own
890 # more optimistic null object that returns True instead.
892 def NullCheck(*args
, **kwargs
):
896 def __init__(self
, env
):
900 def __getattr__(self
, mname
):
903 conf
= NullConf(main
)
905 # Cache build files in the supplied directory.
906 if main
['M5_BUILD_CACHE']:
907 print 'Using build cache located at', main
['M5_BUILD_CACHE']
908 CacheDir(main
['M5_BUILD_CACHE'])
910 if not GetOption('without_python'):
911 # Find Python include and library directories for embedding the
912 # interpreter. We rely on python-config to resolve the appropriate
913 # includes and linker flags. ParseConfig does not seem to understand
914 # the more exotic linker flags such as -Xlinker and -export-dynamic so
915 # we add them explicitly below. If you want to link in an alternate
916 # version of python, see above for instructions on how to invoke
917 # scons with the appropriate PATH set.
919 # First we check if python2-config exists, else we use python-config
920 python_config
= readCommand(['which', 'python2-config'],
921 exception
='').strip()
922 if not os
.path
.exists(python_config
):
923 python_config
= readCommand(['which', 'python-config'],
924 exception
='').strip()
925 py_includes
= readCommand([python_config
, '--includes'],
926 exception
='').split()
927 # Strip the -I from the include folders before adding them to the
929 main
.Append(CPPPATH
=map(lambda inc
: inc
[2:], py_includes
))
931 # Read the linker flags and split them into libraries and other link
932 # flags. The libraries are added later through the call the CheckLib.
933 py_ld_flags
= readCommand([python_config
, '--ldflags'],
934 exception
='').split()
936 for lib
in py_ld_flags
:
937 if not lib
.startswith('-l'):
938 main
.Append(LINKFLAGS
=[lib
])
941 if lib
not in py_libs
:
944 # verify that this stuff works
945 if not conf
.CheckHeader('Python.h', '<>'):
946 print "Error: can't find Python.h header in", py_includes
947 print "Install Python headers (package python-dev on Ubuntu and RedHat)"
951 if not conf
.CheckLib(lib
):
952 print "Error: can't find library %s required by python" % lib
955 # On Solaris you need to use libsocket for socket ops
956 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
957 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
958 print "Can't find library with socket calls (e.g. accept())"
961 # Check for zlib. If the check passes, libz will be automatically
962 # added to the LIBS environment variable.
963 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
964 print 'Error: did not find needed zlib compression library '\
965 'and/or zlib.h header file.'
966 print ' Please install zlib and try again.'
969 # If we have the protobuf compiler, also make sure we have the
970 # development libraries. If the check passes, libprotobuf will be
971 # automatically added to the LIBS environment variable. After
972 # this, we can use the HAVE_PROTOBUF flag to determine if we have
973 # got both protoc and libprotobuf available.
974 main
['HAVE_PROTOBUF'] = main
['PROTOC'] and \
975 conf
.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
976 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
978 # If we have the compiler but not the library, print another warning.
979 if main
['PROTOC'] and not main
['HAVE_PROTOBUF']:
980 print termcap
.Yellow
+ termcap
.Bold
+ \
981 'Warning: did not find protocol buffer library and/or headers.\n' + \
982 ' Please install libprotobuf-dev for tracing support.' + \
987 conf
.CheckLibWithHeader(None, 'time.h', 'C',
988 'clock_nanosleep(0,0,NULL,NULL);') or \
989 conf
.CheckLibWithHeader('rt', 'time.h', 'C',
990 'clock_nanosleep(0,0,NULL,NULL);')
992 have_posix_timers
= \
993 conf
.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C',
994 'timer_create(CLOCK_MONOTONIC, NULL, NULL);')
996 if not GetOption('without_tcmalloc'):
997 if conf
.CheckLib('tcmalloc'):
998 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
999 elif conf
.CheckLib('tcmalloc_minimal'):
1000 main
.Append(CCFLAGS
=main
['TCMALLOC_CCFLAGS'])
1002 print termcap
.Yellow
+ termcap
.Bold
+ \
1003 "You can get a 12% performance improvement by "\
1004 "installing tcmalloc (libgoogle-perftools-dev package "\
1005 "on Ubuntu or RedHat)." + termcap
.Normal
1007 if not have_posix_clock
:
1008 print "Can't find library for POSIX clocks."
1010 # Check for <fenv.h> (C99 FP environment control)
1011 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
1013 print "Warning: Header file <fenv.h> not found."
1014 print " This host has no IEEE FP rounding mode control."
1016 # Check if we should enable KVM-based hardware virtualization. The API
1017 # we rely on exists since version 2.6.36 of the kernel, but somehow
1018 # the KVM_API_VERSION does not reflect the change. We test for one of
1019 # the types as a fall back.
1020 have_kvm
= conf
.CheckHeader('linux/kvm.h', '<>') and \
1021 conf
.CheckTypeSize('struct kvm_xsave', '#include <linux/kvm.h>') != 0
1023 print "Info: Compatible header file <linux/kvm.h> not found, " \
1024 "disabling KVM support."
1026 # Check if the requested target ISA is compatible with the host
1027 def is_isa_kvm_compatible(isa
):
1029 "arm" : ( "armv7l" ),
1030 "x86" : ( "x86_64" ),
1034 host_isa
= platform
.machine()
1036 print "Warning: Failed to determine host ISA."
1039 return host_isa
in isa_comp_table
.get(isa
, [])
1042 # Check if the exclude_host attribute is available. We want this to
1043 # get accurate instruction counts in KVM.
1044 main
['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf
.CheckMember(
1045 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host')
1048 ######################################################################
1050 # Finish the configuration
1052 main
= conf
.Finish()
1054 ######################################################################
1056 # Collect all non-global variables
1059 # Define the universe of supported ISAs
1061 Export('all_isa_list')
1063 class CpuModel(object):
1064 '''The CpuModel class encapsulates everything the ISA parser needs to
1065 know about a particular CPU model.'''
1067 # Dict of available CPU model objects. Accessible as CpuModel.dict.
1070 # Constructor. Automatically adds models to CpuModel.dict.
1071 def __init__(self
, name
, default
=False):
1072 self
.name
= name
# name of model
1074 # This cpu is enabled by default
1075 self
.default
= default
1078 if name
in CpuModel
.dict:
1079 raise AttributeError, "CpuModel '%s' already registered" % name
1080 CpuModel
.dict[name
] = self
1084 # Sticky variables get saved in the variables file so they persist from
1085 # one invocation to the next (unless overridden, in which case the new
1086 # value becomes sticky).
1087 sticky_vars
= Variables(args
=ARGUMENTS
)
1088 Export('sticky_vars')
1090 # Sticky variables that should be exported
1092 Export('export_vars')
1096 Export('all_protocols')
1098 Export('protocol_dirs')
1100 Export('slicc_includes')
1102 # Walk the tree and execute all SConsopts scripts that wil add to the
1104 if GetOption('verbose'):
1105 print "Reading SConsopts"
1106 for bdir
in [ base_dir
] + extras_dir_list
:
1108 print "Error: directory '%s' does not exist" % bdir
1110 for root
, dirs
, files
in os
.walk(bdir
):
1111 if 'SConsopts' in files
:
1112 if GetOption('verbose'):
1113 print "Reading", joinpath(root
, 'SConsopts')
1114 SConscript(joinpath(root
, 'SConsopts'))
1118 sticky_vars
.AddVariables(
1119 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list
),
1120 ListVariable('CPU_MODELS', 'CPU models',
1121 sorted(n
for n
,m
in CpuModel
.dict.iteritems() if m
.default
),
1122 sorted(CpuModel
.dict.keys())),
1123 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
1125 BoolVariable('SS_COMPATIBLE_FP',
1126 'Make floating-point results compatible with SimpleScalar',
1128 BoolVariable('USE_SSE2',
1129 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
1131 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock
),
1132 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
1133 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False),
1134 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm
),
1135 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
1139 # These variables get exported to #defines in config/*.hh (see src/SConscript).
1140 export_vars
+= ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'CP_ANNOTATE',
1141 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 'HAVE_PROTOBUF',
1142 'HAVE_PERF_ATTR_EXCLUDE_HOST']
1144 ###################################################
1146 # Define a SCons builder for configuration flag headers.
1148 ###################################################
1150 # This function generates a config header file that #defines the
1151 # variable symbol to the current variable setting (0 or 1). The source
1152 # operands are the name of the variable and a Value node containing the
1153 # value of the variable.
1154 def build_config_file(target
, source
, env
):
1155 (variable
, value
) = [s
.get_contents() for s
in source
]
1156 f
= file(str(target
[0]), 'w')
1157 print >> f
, '#define', variable
, value
1161 # Combine the two functions into a scons Action object.
1162 config_action
= MakeAction(build_config_file
, Transform("CONFIG H", 2))
1164 # The emitter munges the source & target node lists to reflect what
1165 # we're really doing.
1166 def config_emitter(target
, source
, env
):
1167 # extract variable name from Builder arg
1168 variable
= str(target
[0])
1169 # True target is config header file
1170 target
= joinpath('config', variable
.lower() + '.hh')
1172 if isinstance(val
, bool):
1173 # Force value to 0/1
1175 elif isinstance(val
, str):
1176 val
= '"' + val
+ '"'
1178 # Sources are variable name & value (packaged in SCons Value nodes)
1179 return ([target
], [Value(variable
), Value(val
)])
1181 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
1183 main
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
1185 # libelf build is shared across all configs in the build root.
1186 main
.SConscript('ext/libelf/SConscript',
1187 variant_dir
= joinpath(build_root
, 'libelf'))
1189 # gzstream build is shared across all configs in the build root.
1190 main
.SConscript('ext/gzstream/SConscript',
1191 variant_dir
= joinpath(build_root
, 'gzstream'))
1193 # libfdt build is shared across all configs in the build root.
1194 main
.SConscript('ext/libfdt/SConscript',
1195 variant_dir
= joinpath(build_root
, 'libfdt'))
1197 # fputils build is shared across all configs in the build root.
1198 main
.SConscript('ext/fputils/SConscript',
1199 variant_dir
= joinpath(build_root
, 'fputils'))
1201 # DRAMSim2 build is shared across all configs in the build root.
1202 main
.SConscript('ext/dramsim2/SConscript',
1203 variant_dir
= joinpath(build_root
, 'dramsim2'))
1205 # DRAMPower build is shared across all configs in the build root.
1206 main
.SConscript('ext/drampower/SConscript',
1207 variant_dir
= joinpath(build_root
, 'drampower'))
1209 ###################################################
1211 # This function is used to set up a directory with switching headers
1213 ###################################################
1215 main
['ALL_ISA_LIST'] = all_isa_list
1217 def make_switching_dir(dname
, switch_headers
, env
):
1218 # Generate the header. target[0] is the full path of the output
1219 # header to generate. 'source' is a dummy variable, since we get the
1220 # list of ISAs from env['ALL_ISA_LIST'].
1221 def gen_switch_hdr(target
, source
, env
):
1222 fname
= str(target
[0])
1223 isa
= env
['TARGET_ISA'].lower()
1225 f
= open(fname
, 'w')
1226 print >>f
, '#include "%s/%s/%s"' % (dname
, isa
, basename(fname
))
1229 print "Failed to create %s" % fname
1232 # Build SCons Action object. 'varlist' specifies env vars that this
1233 # action depends on; when env['ALL_ISA_LIST'] changes these actions
1234 # should get re-executed.
1235 switch_hdr_action
= MakeAction(gen_switch_hdr
,
1236 Transform("GENERATE"), varlist
=['ALL_ISA_LIST'])
1238 # Instantiate actions for each header
1239 for hdr
in switch_headers
:
1240 env
.Command(hdr
, [], switch_hdr_action
)
1242 isa_target
= Dir('.').up().name
.lower().replace('_', '-')
1243 env
['PHONY_BASE'] = '#'+isa_target
1244 all_isa_deps
[isa_target
] = None
1246 Export('make_switching_dir')
1248 # all-isas -> all-deps -> all-environs -> all_targets
1249 main
.Alias('#all-isas', [])
1250 main
.Alias('#all-deps', '#all-isas')
1252 # Dummy target to ensure all environments are created before telling
1253 # SCons what to actually make (the command line arguments). We attach
1254 # them to the dependence graph after the environments are complete.
1255 ORIG_BUILD_TARGETS
= list(BUILD_TARGETS
) # force a copy; gets closure to work.
1256 def environsComplete(target
, source
, env
):
1257 for t
in ORIG_BUILD_TARGETS
:
1258 main
.Depends('#all-targets', t
)
1260 # Each build/* switching_dir attaches its *-environs target to #all-environs.
1261 main
.Append(BUILDERS
= {'CompleteEnvirons' :
1262 Builder(action
=MakeAction(environsComplete
, None))})
1263 main
.CompleteEnvirons('#all-environs', [])
1265 def doNothing(**ignored
): pass
1266 main
.Append(BUILDERS
= {'Dummy': Builder(action
=MakeAction(doNothing
, None))})
1268 # The final target to which all the original targets ultimately get attached.
1269 main
.Dummy('#all-targets', '#all-environs')
1270 BUILD_TARGETS
[:] = ['#all-targets']
1272 ###################################################
1274 # Define build environments for selected configurations.
1276 ###################################################
1278 for variant_path
in variant_paths
:
1279 if not GetOption('silent'):
1280 print "Building in", variant_path
1282 # Make a copy of the build-root environment to use for this config.
1284 env
['BUILDDIR'] = variant_path
1286 # variant_dir is the tail component of build path, and is used to
1287 # determine the build parameters (e.g., 'ALPHA_SE')
1288 (build_root
, variant_dir
) = splitpath(variant_path
)
1290 # Set env variables according to the build directory config.
1291 sticky_vars
.files
= []
1292 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1293 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1294 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1295 current_vars_file
= joinpath(build_root
, 'variables', variant_dir
)
1296 if isfile(current_vars_file
):
1297 sticky_vars
.files
.append(current_vars_file
)
1298 if not GetOption('silent'):
1299 print "Using saved variables file %s" % current_vars_file
1301 # Build dir-specific variables file doesn't exist.
1303 # Make sure the directory is there so we can create it later
1304 opt_dir
= dirname(current_vars_file
)
1305 if not isdir(opt_dir
):
1308 # Get default build variables from source tree. Variables are
1309 # normally determined by name of $VARIANT_DIR, but can be
1310 # overridden by '--default=' arg on command line.
1311 default
= GetOption('default')
1312 opts_dir
= joinpath(main
.root
.abspath
, 'build_opts')
1314 default_vars_files
= [joinpath(build_root
, 'variables', default
),
1315 joinpath(opts_dir
, default
)]
1317 default_vars_files
= [joinpath(opts_dir
, variant_dir
)]
1318 existing_files
= filter(isfile
, default_vars_files
)
1320 default_vars_file
= existing_files
[0]
1321 sticky_vars
.files
.append(default_vars_file
)
1322 print "Variables file %s not found,\n using defaults in %s" \
1323 % (current_vars_file
, default_vars_file
)
1325 print "Error: cannot find variables file %s or " \
1326 "default file(s) %s" \
1327 % (current_vars_file
, ' or '.join(default_vars_files
))
1330 # Apply current variable settings to env
1331 sticky_vars
.Update(env
)
1333 help_texts
["local_vars"] += \
1334 "Build variables for %s:\n" % variant_dir \
1335 + sticky_vars
.GenerateHelpText(env
)
1337 # Process variable settings.
1339 if not have_fenv
and env
['USE_FENV']:
1340 print "Warning: <fenv.h> not available; " \
1341 "forcing USE_FENV to False in", variant_dir
+ "."
1342 env
['USE_FENV'] = False
1344 if not env
['USE_FENV']:
1345 print "Warning: No IEEE FP rounding mode control in", variant_dir
+ "."
1346 print " FP results may deviate slightly from other platforms."
1349 env
.Append(LIBS
=['efence'])
1353 print "Warning: Can not enable KVM, host seems to lack KVM support"
1354 env
['USE_KVM'] = False
1355 elif not have_posix_timers
:
1356 print "Warning: Can not enable KVM, host seems to lack support " \
1358 env
['USE_KVM'] = False
1359 elif not is_isa_kvm_compatible(env
['TARGET_ISA']):
1360 print "Info: KVM support disabled due to unsupported host and " \
1361 "target ISA combination"
1362 env
['USE_KVM'] = False
1364 # Warn about missing optional functionality
1366 if not main
['HAVE_PERF_ATTR_EXCLUDE_HOST']:
1367 print "Warning: perf_event headers lack support for the " \
1368 "exclude_host attribute. KVM instruction counts will " \
1371 # Save sticky variable settings back to current variables file
1372 sticky_vars
.Save(current_vars_file
, env
)
1375 env
.Append(CCFLAGS
=['-msse2'])
1377 # The src/SConscript file sets up the build rules in 'env' according
1378 # to the configured variables. It returns a list of environments,
1379 # one for each variant build (debug, opt, etc.)
1380 SConscript('src/SConscript', variant_dir
= variant_path
, exports
= 'env')
1382 def pairwise(iterable
):
1383 "s -> (s0,s1), (s1,s2), (s2, s3), ..."
1384 a
, b
= itertools
.tee(iterable
)
1386 return itertools
.izip(a
, b
)
1388 # Create false dependencies so SCons will parse ISAs, establish
1389 # dependencies, and setup the build Environments serially. Either
1390 # SCons (likely) and/or our SConscripts (possibly) cannot cope with -j
1391 # greater than 1. It appears to be standard race condition stuff; it
1392 # doesn't always fail, but usually, and the behaviors are different.
1393 # Every time I tried to remove this, builds would fail in some
1394 # creative new way. So, don't do that. You'll want to, though, because
1395 # tests/SConscript takes a long time to make its Environments.
1396 for t1
, t2
in pairwise(sorted(all_isa_deps
.iterkeys())):
1397 main
.Depends('#%s-deps' % t2
, '#%s-deps' % t1
)
1398 main
.Depends('#%s-environs' % t2
, '#%s-environs' % t1
)
1402 Usage: scons [scons options] [build variables] [target(s)]
1404 Extra scons options:
1407 Global build variables: