3 # Copyright (c) 2004-2005 The Regents of The University of Michigan
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions are
8 # met: redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer;
10 # redistributions in binary form must reproduce the above copyright
11 # notice, this list of conditions and the following disclaimer in the
12 # documentation and/or other materials provided with the distribution;
13 # neither the name of the copyright holders nor the names of its
14 # contributors may be used to endorse or promote products derived from
15 # this software without specific prior written permission.
17 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 # Authors: Steve Reinhardt
31 ###################################################
33 # SCons top-level build description (SConstruct) file.
35 # While in this directory ('m5'), just type 'scons' to build the default
36 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
37 # to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
38 # the optimized full-system version).
40 # You can build M5 in a different directory as long as there is a
41 # 'build/<CONFIG>' somewhere along the target path. The build system
42 # expects that all configs under the same build directory are being
43 # built for the same host system.
47 # The following two commands are equivalent. The '-u' option tells
48 # scons to search up the directory tree for this SConstruct file.
49 # % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
50 # % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
52 # The following two commands are equivalent and demonstrate building
53 # in a directory outside of the source tree. The '-C' option tells
54 # scons to chdir to the specified directory to find this SConstruct
56 # % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
57 # % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
59 # You can use 'scons -H' to print scons options. If you're in this
60 # 'm5' directory (or use -u or -C to tell scons where to find this
61 # file), you can use 'scons -h' to print all the M5-specific build
64 ###################################################
66 # Python library imports
70 from os
.path
import join
as joinpath
72 # Check for recent-enough Python and SCons versions. If your system's
73 # default installation of Python is not recent enough, you can use a
74 # non-default installation of the Python interpreter by either (1)
75 # rearranging your PATH so that scons finds the non-default 'python'
76 # first or (2) explicitly invoking an alternative interpreter on the
77 # scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]".
78 EnsurePythonVersion(2,4)
80 # Ironically, SCons 0.96 dies if you give EnsureSconsVersion a
81 # 3-element version number.
82 min_scons_version
= (0,96,91)
84 EnsureSConsVersion(*min_scons_version
)
86 print "Error checking current SCons version."
87 print "SCons", ".".join(map(str,min_scons_version
)), "or greater required."
91 # The absolute path to the current directory (where this file lives).
92 ROOT
= Dir('.').abspath
94 # Path to the M5 source tree.
95 SRCDIR
= joinpath(ROOT
, 'src')
97 # tell python where to find m5 python code
98 sys
.path
.append(joinpath(ROOT
, 'src/python'))
100 ###################################################
102 # Figure out which configurations to set up based on the path(s) of
105 ###################################################
107 # Find default configuration & binary.
108 Default(os
.environ
.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
110 # helper function: find last occurrence of element in list
111 def rfind(l
, elt
, offs
= -1):
112 for i
in range(len(l
)+offs
, 0, -1):
115 raise ValueError, "element not found"
117 # helper function: compare dotted version numbers.
118 # E.g., compare_version('1.3.25', '1.4.1')
119 # returns -1, 0, 1 if v1 is <, ==, > v2
120 def compare_versions(v1
, v2
):
121 # Convert dotted strings to lists
122 v1
= map(int, v1
.split('.'))
123 v2
= map(int, v2
.split('.'))
124 # Compare corresponding elements of lists
125 for n1
,n2
in zip(v1
, v2
):
126 if n1
< n2
: return -1
128 # all corresponding values are equal... see if one has extra values
129 if len(v1
) < len(v2
): return -1
130 if len(v1
) > len(v2
): return 1
133 # Each target must have 'build' in the interior of the path; the
134 # directory below this will determine the build parameters. For
135 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
136 # recognize that ALPHA_SE specifies the configuration because it
137 # follow 'build' in the bulid path.
139 # Generate absolute paths to targets so we can see where the build dir is
140 if COMMAND_LINE_TARGETS
:
141 # Ask SCons which directory it was invoked from
142 launch_dir
= GetLaunchDir()
143 # Make targets relative to invocation directory
144 abs_targets
= map(lambda x
: os
.path
.normpath(joinpath(launch_dir
, str(x
))),
145 COMMAND_LINE_TARGETS
)
147 # Default targets are relative to root of tree
148 abs_targets
= map(lambda x
: os
.path
.normpath(joinpath(ROOT
, str(x
))),
152 # Generate a list of the unique build roots and configs that the
153 # collected targets reference.
156 for t
in abs_targets
:
157 path_dirs
= t
.split('/')
159 build_top
= rfind(path_dirs
, 'build', -2)
161 print "Error: no non-leaf 'build' dir found on target path", t
163 this_build_root
= joinpath('/',*path_dirs
[:build_top
+1])
165 build_root
= this_build_root
167 if this_build_root
!= build_root
:
168 print "Error: build targets not under same build root\n"\
169 " %s\n %s" % (build_root
, this_build_root
)
171 build_path
= joinpath('/',*path_dirs
[:build_top
+2])
172 if build_path
not in build_paths
:
173 build_paths
.append(build_path
)
175 ###################################################
177 # Set up the default build environment. This environment is copied
178 # and modified according to each selected configuration.
180 ###################################################
182 env
= Environment(ENV
= os
.environ
, # inherit user's environment vars
186 #Parse CC/CXX early so that we use the correct compiler for
187 # to test for dependencies/versions/libraries/includes
188 if ARGUMENTS
.get('CC', None):
189 env
['CC'] = ARGUMENTS
.get('CC')
191 if ARGUMENTS
.get('CXX', None):
192 env
['CXX'] = ARGUMENTS
.get('CXX')
194 env
.SConsignFile(joinpath(build_root
,"sconsign"))
196 # Default duplicate option is to use hard links, but this messes up
197 # when you use emacs to edit a file in the target dir, as emacs moves
198 # file to file~ then copies to file, breaking the link. Symbolic
199 # (soft) links work better.
200 env
.SetOption('duplicate', 'soft-copy')
202 # I waffle on this setting... it does avoid a few painful but
203 # unnecessary builds, but it also seems to make trivial builds take
206 env
.TargetSignatures('content')
208 # M5_PLY is used by isa_parser.py to find the PLY package.
209 env
.Append(ENV
= { 'M5_PLY' : Dir('ext/ply') })
213 env
['GCC'] = subprocess
.Popen(env
['CXX'] + ' --version', shell
=True,
214 stdout
=subprocess
.PIPE
, stderr
=subprocess
.STDOUT
,
215 close_fds
=True).communicate()[0].find('GCC') >= 0
216 env
['SUNCC'] = subprocess
.Popen(env
['CXX'] + ' -V', shell
=True,
217 stdout
=subprocess
.PIPE
, stderr
=subprocess
.STDOUT
,
218 close_fds
=True).communicate()[0].find('Sun C++') >= 0
219 env
['ICC'] = subprocess
.Popen(env
['CXX'] + ' -V', shell
=True,
220 stdout
=subprocess
.PIPE
, stderr
=subprocess
.STDOUT
,
221 close_fds
=True).communicate()[0].find('Intel') >= 0
222 if env
['GCC'] + env
['SUNCC'] env
['ICC'] > 1:
223 print 'Error: How can we have two at the same time?'
227 # Set up default C++ compiler flags
229 env
.Append(CCFLAGS
='-pipe')
230 env
.Append(CCFLAGS
='-fno-strict-aliasing')
231 env
.Append(CCFLAGS
=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
233 pass #Fix me... add warning flags once we clean up icc warnings
235 env
.Append(CCFLAGS
='-Qoption ccfe')
236 env
.Append(CCFLAGS
='-features=gcc')
237 env
.Append(CCFLAGS
='-features=extensions')
238 env
.Append(CCFLAGS
='-library=stlport4')
239 env
.Append(CCFLAGS
='-xar')
240 # env.Append(CCFLAGS='-instances=semiexplicit')
242 print 'Error: Don\'t know what compiler options to use for your compiler.'
243 print ' Please fix SConstruct and src/SConscript and try again.'
246 if sys
.platform
== 'cygwin':
247 # cygwin has some header file issues...
248 env
.Append(CCFLAGS
=Split("-Wno-uninitialized"))
249 env
.Append(CPPPATH
=[Dir('ext/dnet')])
252 if not env
.has_key('SWIG'):
253 print 'Error: SWIG utility not found.'
254 print ' Please install (see http://www.swig.org) and retry.'
257 # Check for appropriate SWIG version
258 swig_version
= os
.popen('swig -version').read().split()
259 # First 3 words should be "SWIG Version x.y.z"
260 if swig_version
[0] != 'SWIG' or swig_version
[1] != 'Version':
261 print 'Error determining SWIG version.'
264 min_swig_version
= '1.3.28'
265 if compare_versions(swig_version
[2], min_swig_version
) < 0:
266 print 'Error: SWIG version', min_swig_version
, 'or newer required.'
267 print ' Installed version:', swig_version
[2]
270 # Set up SWIG flags & scanner
271 env
.Append(SWIGFLAGS
=Split('-c++ -python -modern $_CPPINCFLAGS'))
275 swig_inc_re
= '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
277 swig_scanner
= SCons
.Scanner
.ClassicCPP("SwigScan", ".i", "CPPPATH",
280 env
.Append(SCANNERS
= swig_scanner
)
282 # Platform-specific configuration. Note again that we assume that all
283 # builds under a given build root run on the same host platform.
284 conf
= Configure(env
,
285 conf_dir
= joinpath(build_root
, '.scons_config'),
286 log_file
= joinpath(build_root
, 'scons_config.log'))
288 # Find Python include and library directories for embedding the
289 # interpreter. For consistency, we will use the same Python
290 # installation used to run scons (and thus this script). If you want
291 # to link in an alternate version, see above for instructions on how
292 # to invoke scons with a different copy of the Python interpreter.
294 # Get brief Python version name (e.g., "python2.4") for locating
295 # include & library files
296 py_version_name
= 'python' + sys
.version
[:3]
298 # include path, e.g. /usr/local/include/python2.4
299 py_header_path
= joinpath(sys
.exec_prefix
, 'include', py_version_name
)
300 env
.Append(CPPPATH
= py_header_path
)
301 # verify that it works
302 if not conf
.CheckHeader('Python.h', '<>'):
303 print "Error: can't find Python.h header in", py_header_path
306 # add library path too if it's not in the default place
308 if sys
.exec_prefix
!= '/usr':
309 py_lib_path
= joinpath(sys
.exec_prefix
, 'lib')
310 elif sys
.platform
== 'cygwin':
311 # cygwin puts the .dll in /bin for some reason
314 env
.Append(LIBPATH
= py_lib_path
)
315 print 'Adding', py_lib_path
, 'to LIBPATH for', py_version_name
316 if not conf
.CheckLib(py_version_name
):
317 print "Error: can't find Python library", py_version_name
320 # On Solaris you need to use libsocket for socket ops
321 if not conf
.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
322 if not conf
.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
323 print "Can't find library with socket calls (e.g. accept())"
326 # Check for zlib. If the check passes, libz will be automatically
327 # added to the LIBS environment variable.
328 if not conf
.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
329 print 'Error: did not find needed zlib compression library '\
330 'and/or zlib.h header file.'
331 print ' Please install zlib and try again.'
334 # Check for <fenv.h> (C99 FP environment control)
335 have_fenv
= conf
.CheckHeader('fenv.h', '<>')
337 print "Warning: Header file <fenv.h> not found."
338 print " This host has no IEEE FP rounding mode control."
341 mysql_config
= WhereIs('mysql_config')
342 have_mysql
= mysql_config
!= None
344 # Check MySQL version.
346 mysql_version
= os
.popen(mysql_config
+ ' --version').read()
347 min_mysql_version
= '4.1'
348 if compare_versions(mysql_version
, min_mysql_version
) < 0:
349 print 'Warning: MySQL', min_mysql_version
, 'or newer required.'
350 print ' Version', mysql_version
, 'detected.'
353 # Set up mysql_config commands.
355 mysql_config_include
= mysql_config
+ ' --include'
356 if os
.system(mysql_config_include
+ ' > /dev/null') != 0:
357 # older mysql_config versions don't support --include, use
359 mysql_config_include
= mysql_config
+ ' --cflags | sed s/\\\'//g'
360 # This seems to work in all versions
361 mysql_config_libs
= mysql_config
+ ' --libs'
365 # Define the universe of supported ISAs
366 env
['ALL_ISA_LIST'] = ['alpha', 'sparc', 'mips']
368 # Define the universe of supported CPU models
369 env
['ALL_CPU_LIST'] = ['AtomicSimpleCPU', 'TimingSimpleCPU',
372 if os
.path
.isdir(joinpath(SRCDIR
, 'encumbered/cpu/full')):
373 env
['ALL_CPU_LIST'] += ['FullCPU']
375 # Sticky options get saved in the options file so they persist from
376 # one invocation to the next (unless overridden, in which case the new
377 # value becomes sticky).
378 sticky_opts
= Options(args
=ARGUMENTS
)
379 sticky_opts
.AddOptions(
380 EnumOption('TARGET_ISA', 'Target ISA', 'alpha', env
['ALL_ISA_LIST']),
381 BoolOption('FULL_SYSTEM', 'Full-system support', False),
382 # There's a bug in scons 0.96.1 that causes ListOptions with list
383 # values (more than one value) not to be able to be restored from
384 # a saved option file. If this causes trouble then upgrade to
385 # scons 0.96.90 or later.
386 ListOption('CPU_MODELS', 'CPU models', 'AtomicSimpleCPU,TimingSimpleCPU,O3CPU',
387 env
['ALL_CPU_LIST']),
388 BoolOption('ALPHA_TLASER',
389 'Model Alpha TurboLaser platform (vs. Tsunami)', False),
390 BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False),
391 BoolOption('EFENCE', 'Link with Electric Fence malloc debugger',
393 BoolOption('SS_COMPATIBLE_FP',
394 'Make floating-point results compatible with SimpleScalar',
396 BoolOption('USE_SSE2',
397 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
399 BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql
),
400 BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv
),
401 BoolOption('USE_CHECKER', 'Use checker for detailed CPU models', False),
402 ('CC', 'C compiler', os
.environ
.get('CC', env
['CC'])),
403 ('CXX', 'C++ compiler', os
.environ
.get('CXX', env
['CXX'])),
404 BoolOption('BATCH', 'Use batch pool for build and tests', False),
405 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
407 'Override the default PYTHONHOME for this system (use with caution)',
408 '%s:%s' % (sys
.prefix
, sys
.exec_prefix
))
411 # Non-sticky options only apply to the current build.
412 nonsticky_opts
= Options(args
=ARGUMENTS
)
413 nonsticky_opts
.AddOptions(
414 BoolOption('update_ref', 'Update test reference outputs', False)
417 # These options get exported to #defines in config/*.hh (see src/SConscript).
418 env
.ExportOptions
= ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \
419 'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \
420 'USE_CHECKER', 'PYTHONHOME', 'TARGET_ISA']
422 # Define a handy 'no-op' action
423 def no_action(target
, source
, env
):
426 env
.NoAction
= Action(no_action
, None)
428 ###################################################
430 # Define a SCons builder for configuration flag headers.
432 ###################################################
434 # This function generates a config header file that #defines the
435 # option symbol to the current option setting (0 or 1). The source
436 # operands are the name of the option and a Value node containing the
437 # value of the option.
438 def build_config_file(target
, source
, env
):
439 (option
, value
) = [s
.get_contents() for s
in source
]
440 f
= file(str(target
[0]), 'w')
441 print >> f
, '#define', option
, value
445 # Generate the message to be printed when building the config file.
446 def build_config_file_string(target
, source
, env
):
447 (option
, value
) = [s
.get_contents() for s
in source
]
448 return "Defining %s as %s in %s." % (option
, value
, target
[0])
450 # Combine the two functions into a scons Action object.
451 config_action
= Action(build_config_file
, build_config_file_string
)
453 # The emitter munges the source & target node lists to reflect what
454 # we're really doing.
455 def config_emitter(target
, source
, env
):
456 # extract option name from Builder arg
457 option
= str(target
[0])
458 # True target is config header file
459 target
= joinpath('config', option
.lower() + '.hh')
461 if isinstance(val
, bool):
464 elif isinstance(val
, str):
465 val
= '"' + val
+ '"'
467 # Sources are option name & value (packaged in SCons Value nodes)
468 return ([target
], [Value(option
), Value(val
)])
470 config_builder
= Builder(emitter
= config_emitter
, action
= config_action
)
472 env
.Append(BUILDERS
= { 'ConfigFile' : config_builder
})
474 ###################################################
476 # Define a SCons builder for copying files. This is used by the
477 # Python zipfile code in src/python/SConscript, but is placed up here
478 # since it's potentially more generally applicable.
480 ###################################################
482 copy_builder
= Builder(action
= Copy("$TARGET", "$SOURCE"))
484 env
.Append(BUILDERS
= { 'CopyFile' : copy_builder
})
486 ###################################################
488 # Define a simple SCons builder to concatenate files.
490 # Used to append the Python zip archive to the executable.
492 ###################################################
494 concat_builder
= Builder(action
= Action(['cat $SOURCES > $TARGET',
495 'chmod +x $TARGET']))
497 env
.Append(BUILDERS
= { 'Concat' : concat_builder
})
502 Usage: scons [scons options] [build options] [target(s)]
506 # libelf build is shared across all configs in the build root.
507 env
.SConscript('ext/libelf/SConscript',
508 build_dir
= joinpath(build_root
, 'libelf'),
511 ###################################################
513 # This function is used to set up a directory with switching headers
515 ###################################################
517 def make_switching_dir(dirname
, switch_headers
, env
):
518 # Generate the header. target[0] is the full path of the output
519 # header to generate. 'source' is a dummy variable, since we get the
520 # list of ISAs from env['ALL_ISA_LIST'].
521 def gen_switch_hdr(target
, source
, env
):
522 fname
= str(target
[0])
523 basename
= os
.path
.basename(fname
)
525 f
.write('#include "arch/isa_specific.hh"\n')
527 for isa
in env
['ALL_ISA_LIST']:
528 f
.write('%s THE_ISA == %s_ISA\n#include "%s/%s/%s"\n'
529 % (cond
, isa
.upper(), dirname
, isa
, basename
))
531 f
.write('#else\n#error "THE_ISA not set"\n#endif\n')
535 # String to print when generating header
536 def gen_switch_hdr_string(target
, source
, env
):
537 return "Generating switch header " + str(target
[0])
539 # Build SCons Action object. 'varlist' specifies env vars that this
540 # action depends on; when env['ALL_ISA_LIST'] changes these actions
541 # should get re-executed.
542 switch_hdr_action
= Action(gen_switch_hdr
, gen_switch_hdr_string
,
543 varlist
=['ALL_ISA_LIST'])
545 # Instantiate actions for each header
546 for hdr
in switch_headers
:
547 env
.Command(hdr
, [], switch_hdr_action
)
549 env
.make_switching_dir
= make_switching_dir
551 ###################################################
553 # Define build environments for selected configurations.
555 ###################################################
560 for build_path
in build_paths
:
561 print "Building in", build_path
562 # build_dir is the tail component of build path, and is used to
563 # determine the build parameters (e.g., 'ALPHA_SE')
564 (build_root
, build_dir
) = os
.path
.split(build_path
)
565 # Make a copy of the build-root environment to use for this config.
566 env
= base_env
.Copy()
568 # Set env options according to the build directory config.
569 sticky_opts
.files
= []
570 # Options for $BUILD_ROOT/$BUILD_DIR are stored in
571 # $BUILD_ROOT/options/$BUILD_DIR so you can nuke
572 # $BUILD_ROOT/$BUILD_DIR without losing your options settings.
573 current_opts_file
= joinpath(build_root
, 'options', build_dir
)
574 if os
.path
.isfile(current_opts_file
):
575 sticky_opts
.files
.append(current_opts_file
)
576 print "Using saved options file %s" % current_opts_file
578 # Build dir-specific options file doesn't exist.
580 # Make sure the directory is there so we can create it later
581 opt_dir
= os
.path
.dirname(current_opts_file
)
582 if not os
.path
.isdir(opt_dir
):
585 # Get default build options from source tree. Options are
586 # normally determined by name of $BUILD_DIR, but can be
587 # overriden by 'default=' arg on command line.
588 default_opts_file
= joinpath('build_opts',
589 ARGUMENTS
.get('default', build_dir
))
590 if os
.path
.isfile(default_opts_file
):
591 sticky_opts
.files
.append(default_opts_file
)
592 print "Options file %s not found,\n using defaults in %s" \
593 % (current_opts_file
, default_opts_file
)
595 print "Error: cannot find options file %s or %s" \
596 % (current_opts_file
, default_opts_file
)
599 # Apply current option settings to env
600 sticky_opts
.Update(env
)
601 nonsticky_opts
.Update(env
)
603 help_text
+= "Sticky options for %s:\n" % build_dir \
604 + sticky_opts
.GenerateHelpText(env
) \
605 + "\nNon-sticky options for %s:\n" % build_dir \
606 + nonsticky_opts
.GenerateHelpText(env
)
608 # Process option settings.
610 if not have_fenv
and env
['USE_FENV']:
611 print "Warning: <fenv.h> not available; " \
612 "forcing USE_FENV to False in", build_dir
+ "."
613 env
['USE_FENV'] = False
615 if not env
['USE_FENV']:
616 print "Warning: No IEEE FP rounding mode control in", build_dir
+ "."
617 print " FP results may deviate slightly from other platforms."
620 env
.Append(LIBS
=['efence'])
624 print "Warning: MySQL not available; " \
625 "forcing USE_MYSQL to False in", build_dir
+ "."
626 env
['USE_MYSQL'] = False
628 print "Compiling in", build_dir
, "with MySQL support."
629 env
.ParseConfig(mysql_config_libs
)
630 env
.ParseConfig(mysql_config_include
)
632 # Save sticky option settings back to current options file
633 sticky_opts
.Save(current_opts_file
, env
)
635 # Do this after we save setting back, or else we'll tack on an
636 # extra 'qdo' every time we run scons.
638 env
['CC'] = env
['BATCH_CMD'] + ' ' + env
['CC']
639 env
['CXX'] = env
['BATCH_CMD'] + ' ' + env
['CXX']
642 env
.Append(CCFLAGS
='-msse2')
644 # The src/SConscript file sets up the build rules in 'env' according
645 # to the configured options. It returns a list of environments,
646 # one for each variant build (debug, opt, etc.)
647 envList
= SConscript('src/SConscript', build_dir
= build_path
,
650 # Set up the regression tests for each build.
652 SConscript('tests/SConscript',
653 build_dir
= joinpath(build_path
, 'tests', e
.Label
),
654 exports
= { 'env' : e
}, duplicate
= False)
659 ###################################################
661 # Let SCons do its thing. At this point SCons will use the defined
662 # build environments to build the requested targets.
664 ###################################################