SConstruct

   1 # -*- mode:python -*-
   2
   3 # Copyright (c) 2004-2005 The Regents of The University of Michigan
   4 # All rights reserved.
   5 #
   6 # Redistribution and use in source and binary forms, with or without
   7 # modification, are permitted provided that the following conditions are
   8 # met: redistributions of source code must retain the above copyright
   9 # notice, this list of conditions and the following disclaimer;
  10 # redistributions in binary form must reproduce the above copyright
  11 # notice, this list of conditions and the following disclaimer in the
  12 # documentation and/or other materials provided with the distribution;
  13 # neither the name of the copyright holders nor the names of its
  14 # contributors may be used to endorse or promote products derived from
  15 # this software without specific prior written permission.
  16 #
  17 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  18 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  19 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  20 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  21 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  22 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  23 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  24 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  25 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  27 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28 #
  29 # Authors: Steve Reinhardt
  30
  31 ###################################################
  32 #
  33 # SCons top-level build description (SConstruct) file.
  34 #
  35 # While in this directory ('m5'), just type 'scons' to build the default
  36 # configuration (see below), or type 'scons build/<CONFIG>/<binary>'
  37 # to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
  38 # the optimized full-system version).
  39 #
  40 # You can build M5 in a different directory as long as there is a
  41 # 'build/<CONFIG>' somewhere along the target path.  The build system
  42 # expects that all configs under the same build directory are being
  43 # built for the same host system.
  44 #
  45 # Examples:
  46 #
  47 #   The following two commands are equivalent.  The '-u' option tells
  48 #   scons to search up the directory tree for this SConstruct file.
  49 #   % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
  50 #   % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
  51 #
  52 #   The following two commands are equivalent and demonstrate building
  53 #   in a directory outside of the source tree.  The '-C' option tells
  54 #   scons to chdir to the specified directory to find this SConstruct
  55 #   file.
  56 #   % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
  57 #   % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
  58 #
  59 # You can use 'scons -H' to print scons options.  If you're in this
  60 # 'm5' directory (or use -u or -C to tell scons where to find this
  61 # file), you can use 'scons -h' to print all the M5-specific build
  62 # options as well.
  63 #
  64 ###################################################
  65
  66 # Python library imports
  67 import sys
  68 import os
  69 import subprocess
  70 from os.path import join as joinpath
  71
  72 # Check for recent-enough Python and SCons versions.  If your system's
  73 # default installation of Python is not recent enough, you can use a
  74 # non-default installation of the Python interpreter by either (1)
  75 # rearranging your PATH so that scons finds the non-default 'python'
  76 # first or (2) explicitly invoking an alternative interpreter on the
  77 # scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]".
  78 EnsurePythonVersion(2,4)
  79
  80 # Ironically, SCons 0.96 dies if you give EnsureSconsVersion a
  81 # 3-element version number.
  82 min_scons_version = (0,96,91)
  83 try:
  84     EnsureSConsVersion(*min_scons_version)
  85 except:
  86     print "Error checking current SCons version."
  87     print "SCons", ".".join(map(str,min_scons_version)), "or greater required."
  88     Exit(2)
  89
  90
  91 # The absolute path to the current directory (where this file lives).
  92 ROOT = Dir('.').abspath
  93
  94 # Path to the M5 source tree.
  95 SRCDIR = joinpath(ROOT, 'src')
  96
  97 # tell python where to find m5 python code
  98 sys.path.append(joinpath(ROOT, 'src/python'))
  99
 100 ###################################################
 101 #
 102 # Figure out which configurations to set up based on the path(s) of
 103 # the target(s).
 104 #
 105 ###################################################
 106
 107 # Find default configuration & binary.
 108 Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
 109
 110 # helper function: find last occurrence of element in list
 111 def rfind(l, elt, offs = -1):
 112     for i in range(len(l)+offs, 0, -1):
 113         if l[i] == elt:
 114             return i
 115     raise ValueError, "element not found"
 116
 117 # helper function: compare dotted version numbers.
 118 # E.g., compare_version('1.3.25', '1.4.1')
 119 # returns -1, 0, 1 if v1 is <, ==, > v2
 120 def compare_versions(v1, v2):
 121     # Convert dotted strings to lists
 122     v1 = map(int, v1.split('.'))
 123     v2 = map(int, v2.split('.'))
 124     # Compare corresponding elements of lists
 125     for n1,n2 in zip(v1, v2):
 126         if n1 < n2: return -1
 127         if n1 > n2: return  1
 128     # all corresponding values are equal... see if one has extra values
 129     if len(v1) < len(v2): return -1
 130     if len(v1) > len(v2): return  1
 131     return 0
 132
 133 # Each target must have 'build' in the interior of the path; the
 134 # directory below this will determine the build parameters.  For
 135 # example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
 136 # recognize that ALPHA_SE specifies the configuration because it
 137 # follow 'build' in the bulid path.
 138
 139 # Generate absolute paths to targets so we can see where the build dir is
 140 if COMMAND_LINE_TARGETS:
 141     # Ask SCons which directory it was invoked from
 142     launch_dir = GetLaunchDir()
 143     # Make targets relative to invocation directory
 144     abs_targets = map(lambda x: os.path.normpath(joinpath(launch_dir, str(x))),
 145                       COMMAND_LINE_TARGETS)
 146 else:
 147     # Default targets are relative to root of tree
 148     abs_targets = map(lambda x: os.path.normpath(joinpath(ROOT, str(x))),
 149                       DEFAULT_TARGETS)
 150
 151
 152 # Generate a list of the unique build roots and configs that the
 153 # collected targets reference.
 154 build_paths = []
 155 build_root = None
 156 for t in abs_targets:
 157     path_dirs = t.split('/')
 158     try:
 159         build_top = rfind(path_dirs, 'build', -2)
 160     except:
 161         print "Error: no non-leaf 'build' dir found on target path", t
 162         Exit(1)
 163     this_build_root = joinpath('/',*path_dirs[:build_top+1])
 164     if not build_root:
 165         build_root = this_build_root
 166     else:
 167         if this_build_root != build_root:
 168             print "Error: build targets not under same build root\n"\
 169                   "  %s\n  %s" % (build_root, this_build_root)
 170             Exit(1)
 171     build_path = joinpath('/',*path_dirs[:build_top+2])
 172     if build_path not in build_paths:
 173         build_paths.append(build_path)
 174
 175 ###################################################
 176 #
 177 # Set up the default build environment.  This environment is copied
 178 # and modified according to each selected configuration.
 179 #
 180 ###################################################
 181
 182 env = Environment(ENV = os.environ,  # inherit user's environment vars
 183                   ROOT = ROOT,
 184                   SRCDIR = SRCDIR)
 185
 186 #Parse CC/CXX early so that we use the correct compiler for
 187 # to test for dependencies/versions/libraries/includes
 188 if ARGUMENTS.get('CC', None):
 189     env['CC'] = ARGUMENTS.get('CC')
 190
 191 if ARGUMENTS.get('CXX', None):
 192     env['CXX'] = ARGUMENTS.get('CXX')
 193
 194 env.SConsignFile(joinpath(build_root,"sconsign"))
 195
 196 # Default duplicate option is to use hard links, but this messes up
 197 # when you use emacs to edit a file in the target dir, as emacs moves
 198 # file to file~ then copies to file, breaking the link.  Symbolic
 199 # (soft) links work better.
 200 env.SetOption('duplicate', 'soft-copy')
 201
 202 # I waffle on this setting... it does avoid a few painful but
 203 # unnecessary builds, but it also seems to make trivial builds take
 204 # noticeably longer.
 205 if False:
 206     env.TargetSignatures('content')
 207
 208 # M5_PLY is used by isa_parser.py to find the PLY package.
 209 env.Append(ENV = { 'M5_PLY' : Dir('ext/ply') })
 210 env['GCC'] = False
 211 env['SUNCC'] = False
 212 env['ICC'] = False
 213 env['GCC'] = subprocess.Popen(env['CXX'] + ' --version', shell=True,
 214         stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
 215         close_fds=True).communicate()[0].find('GCC') >= 0
 216 env['SUNCC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True,
 217         stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
 218         close_fds=True).communicate()[0].find('Sun C++') >= 0
 219 env['ICC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True,
 220         stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
 221         close_fds=True).communicate()[0].find('Intel') >= 0
 222 if env['GCC'] + env['SUNCC'] + env['ICC'] > 1:
 223     print 'Error: How can we have two at the same time?'
 224     Exit(1)
 225
 226
 227 # Set up default C++ compiler flags
 228 if env['GCC']:
 229     env.Append(CCFLAGS='-pipe')
 230     env.Append(CCFLAGS='-fno-strict-aliasing')
 231     env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
 232 elif env['ICC']:
 233     pass #Fix me... add warning flags once we clean up icc warnings
 234 elif env['SUNCC']:
 235     env.Append(CCFLAGS='-Qoption ccfe')
 236     env.Append(CCFLAGS='-features=gcc')
 237     env.Append(CCFLAGS='-features=extensions')
 238     env.Append(CCFLAGS='-library=stlport4')
 239     env.Append(CCFLAGS='-xar')
 240 #    env.Append(CCFLAGS='-instances=semiexplicit')
 241 else:
 242     print 'Error: Don\'t know what compiler options to use for your compiler.'
 243     print '       Please fix SConstruct and src/SConscript and try again.'
 244     Exit(1)
 245
 246 if sys.platform == 'cygwin':
 247     # cygwin has some header file issues...
 248     env.Append(CCFLAGS=Split("-Wno-uninitialized"))
 249 env.Append(CPPPATH=[Dir('ext/dnet')])
 250
 251 # Check for SWIG
 252 if not env.has_key('SWIG'):
 253     print 'Error: SWIG utility not found.'
 254     print '       Please install (see http://www.swig.org) and retry.'
 255     Exit(1)
 256
 257 # Check for appropriate SWIG version
 258 swig_version = os.popen('swig -version').read().split()
 259 # First 3 words should be "SWIG Version x.y.z"
 260 if swig_version[0] != 'SWIG' or swig_version[1] != 'Version':
 261     print 'Error determining SWIG version.'
 262     Exit(1)
 263
 264 min_swig_version = '1.3.28'
 265 if compare_versions(swig_version[2], min_swig_version) < 0:
 266     print 'Error: SWIG version', min_swig_version, 'or newer required.'
 267     print '       Installed version:', swig_version[2]
 268     Exit(1)
 269
 270 # Set up SWIG flags & scanner
 271 env.Append(SWIGFLAGS=Split('-c++ -python -modern $_CPPINCFLAGS'))
 272
 273 import SCons.Scanner
 274
 275 swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
 276
 277 swig_scanner = SCons.Scanner.ClassicCPP("SwigScan", ".i", "CPPPATH",
 278                                         swig_inc_re)
 279
 280 env.Append(SCANNERS = swig_scanner)
 281
 282 # Platform-specific configuration.  Note again that we assume that all
 283 # builds under a given build root run on the same host platform.
 284 conf = Configure(env,
 285                  conf_dir = joinpath(build_root, '.scons_config'),
 286                  log_file = joinpath(build_root, 'scons_config.log'))
 287
 288 # Find Python include and library directories for embedding the
 289 # interpreter.  For consistency, we will use the same Python
 290 # installation used to run scons (and thus this script).  If you want
 291 # to link in an alternate version, see above for instructions on how
 292 # to invoke scons with a different copy of the Python interpreter.
 293
 294 # Get brief Python version name (e.g., "python2.4") for locating
 295 # include & library files
 296 py_version_name = 'python' + sys.version[:3]
 297
 298 # include path, e.g. /usr/local/include/python2.4
 299 py_header_path = joinpath(sys.exec_prefix, 'include', py_version_name)
 300 env.Append(CPPPATH = py_header_path)
 301 # verify that it works
 302 if not conf.CheckHeader('Python.h', '<>'):
 303     print "Error: can't find Python.h header in", py_header_path
 304     Exit(1)
 305
 306 # add library path too if it's not in the default place
 307 py_lib_path = None
 308 if sys.exec_prefix != '/usr':
 309     py_lib_path = joinpath(sys.exec_prefix, 'lib')
 310 elif sys.platform == 'cygwin':
 311     # cygwin puts the .dll in /bin for some reason
 312     py_lib_path = '/bin'
 313 if py_lib_path:
 314     env.Append(LIBPATH = py_lib_path)
 315     print 'Adding', py_lib_path, 'to LIBPATH for', py_version_name
 316 if not conf.CheckLib(py_version_name):
 317     print "Error: can't find Python library", py_version_name
 318     Exit(1)
 319
 320 # On Solaris you need to use libsocket for socket ops
 321 if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
 322    if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
 323        print "Can't find library with socket calls (e.g. accept())"
 324        Exit(1)
 325
 326 # Check for zlib.  If the check passes, libz will be automatically
 327 # added to the LIBS environment variable.
 328 if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
 329     print 'Error: did not find needed zlib compression library '\
 330           'and/or zlib.h header file.'
 331     print '       Please install zlib and try again.'
 332     Exit(1)
 333
 334 # Check for <fenv.h> (C99 FP environment control)
 335 have_fenv = conf.CheckHeader('fenv.h', '<>')
 336 if not have_fenv:
 337     print "Warning: Header file <fenv.h> not found."
 338     print "         This host has no IEEE FP rounding mode control."
 339
 340 # Check for mysql.
 341 mysql_config = WhereIs('mysql_config')
 342 have_mysql = mysql_config != None
 343
 344 # Check MySQL version.
 345 if have_mysql:
 346     mysql_version = os.popen(mysql_config + ' --version').read()
 347     min_mysql_version = '4.1'
 348     if compare_versions(mysql_version, min_mysql_version) < 0:
 349         print 'Warning: MySQL', min_mysql_version, 'or newer required.'
 350         print '         Version', mysql_version, 'detected.'
 351         have_mysql = False
 352
 353 # Set up mysql_config commands.
 354 if have_mysql:
 355     mysql_config_include = mysql_config + ' --include'
 356     if os.system(mysql_config_include + ' > /dev/null') != 0:
 357         # older mysql_config versions don't support --include, use
 358         # --cflags instead
 359         mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g'
 360     # This seems to work in all versions
 361     mysql_config_libs = mysql_config + ' --libs'
 362
 363 env = conf.Finish()
 364
 365 # Define the universe of supported ISAs
 366 env['ALL_ISA_LIST'] = ['alpha', 'sparc', 'mips']
 367
 368 # Define the universe of supported CPU models
 369 env['ALL_CPU_LIST'] = ['AtomicSimpleCPU', 'TimingSimpleCPU',
 370                        'O3CPU', 'OzoneCPU']
 371
 372 if os.path.isdir(joinpath(SRCDIR, 'encumbered/cpu/full')):
 373     env['ALL_CPU_LIST'] += ['FullCPU']
 374
 375 # Sticky options get saved in the options file so they persist from
 376 # one invocation to the next (unless overridden, in which case the new
 377 # value becomes sticky).
 378 sticky_opts = Options(args=ARGUMENTS)
 379 sticky_opts.AddOptions(
 380     EnumOption('TARGET_ISA', 'Target ISA', 'alpha', env['ALL_ISA_LIST']),
 381     BoolOption('FULL_SYSTEM', 'Full-system support', False),
 382     # There's a bug in scons 0.96.1 that causes ListOptions with list
 383     # values (more than one value) not to be able to be restored from
 384     # a saved option file.  If this causes trouble then upgrade to
 385     # scons 0.96.90 or later.
 386     ListOption('CPU_MODELS', 'CPU models', 'AtomicSimpleCPU,TimingSimpleCPU,O3CPU',
 387                env['ALL_CPU_LIST']),
 388     BoolOption('ALPHA_TLASER',
 389                'Model Alpha TurboLaser platform (vs. Tsunami)', False),
 390     BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False),
 391     BoolOption('EFENCE', 'Link with Electric Fence malloc debugger',
 392                False),
 393     BoolOption('SS_COMPATIBLE_FP',
 394                'Make floating-point results compatible with SimpleScalar',
 395                False),
 396     BoolOption('USE_SSE2',
 397                'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
 398                False),
 399     BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql),
 400     BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
 401     BoolOption('USE_CHECKER', 'Use checker for detailed CPU models', False),
 402     ('CC', 'C compiler', os.environ.get('CC', env['CC'])),
 403     ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])),
 404     BoolOption('BATCH', 'Use batch pool for build and tests', False),
 405     ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
 406     ('PYTHONHOME',
 407      'Override the default PYTHONHOME for this system (use with caution)',
 408      '%s:%s' % (sys.prefix, sys.exec_prefix))
 409     )
 410
 411 # Non-sticky options only apply to the current build.
 412 nonsticky_opts = Options(args=ARGUMENTS)
 413 nonsticky_opts.AddOptions(
 414     BoolOption('update_ref', 'Update test reference outputs', False)
 415     )
 416
 417 # These options get exported to #defines in config/*.hh (see src/SConscript).
 418 env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \
 419                      'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \
 420                      'USE_CHECKER', 'PYTHONHOME', 'TARGET_ISA']
 421
 422 # Define a handy 'no-op' action
 423 def no_action(target, source, env):
 424     return 0
 425
 426 env.NoAction = Action(no_action, None)
 427
 428 ###################################################
 429 #
 430 # Define a SCons builder for configuration flag headers.
 431 #
 432 ###################################################
 433
 434 # This function generates a config header file that #defines the
 435 # option symbol to the current option setting (0 or 1).  The source
 436 # operands are the name of the option and a Value node containing the
 437 # value of the option.
 438 def build_config_file(target, source, env):
 439     (option, value) = [s.get_contents() for s in source]
 440     f = file(str(target[0]), 'w')
 441     print >> f, '#define', option, value
 442     f.close()
 443     return None
 444
 445 # Generate the message to be printed when building the config file.
 446 def build_config_file_string(target, source, env):
 447     (option, value) = [s.get_contents() for s in source]
 448     return "Defining %s as %s in %s." % (option, value, target[0])
 449
 450 # Combine the two functions into a scons Action object.
 451 config_action = Action(build_config_file, build_config_file_string)
 452
 453 # The emitter munges the source & target node lists to reflect what
 454 # we're really doing.
 455 def config_emitter(target, source, env):
 456     # extract option name from Builder arg
 457     option = str(target[0])
 458     # True target is config header file
 459     target = joinpath('config', option.lower() + '.hh')
 460     val = env[option]
 461     if isinstance(val, bool):
 462         # Force value to 0/1
 463         val = int(val)
 464     elif isinstance(val, str):
 465         val = '"' + val + '"'
 466
 467     # Sources are option name & value (packaged in SCons Value nodes)
 468     return ([target], [Value(option), Value(val)])
 469
 470 config_builder = Builder(emitter = config_emitter, action = config_action)
 471
 472 env.Append(BUILDERS = { 'ConfigFile' : config_builder })
 473
 474 ###################################################
 475 #
 476 # Define a SCons builder for copying files.  This is used by the
 477 # Python zipfile code in src/python/SConscript, but is placed up here
 478 # since it's potentially more generally applicable.
 479 #
 480 ###################################################
 481
 482 copy_builder = Builder(action = Copy("$TARGET", "$SOURCE"))
 483
 484 env.Append(BUILDERS = { 'CopyFile' : copy_builder })
 485
 486 ###################################################
 487 #
 488 # Define a simple SCons builder to concatenate files.
 489 #
 490 # Used to append the Python zip archive to the executable.
 491 #
 492 ###################################################
 493
 494 concat_builder = Builder(action = Action(['cat $SOURCES > $TARGET',
 495                                           'chmod +x $TARGET']))
 496
 497 env.Append(BUILDERS = { 'Concat' : concat_builder })
 498
 499
 500 # base help text
 501 help_text = '''
 502 Usage: scons [scons options] [build options] [target(s)]
 503
 504 '''
 505
 506 # libelf build is shared across all configs in the build root.
 507 env.SConscript('ext/libelf/SConscript',
 508                build_dir = joinpath(build_root, 'libelf'),
 509                exports = 'env')
 510
 511 ###################################################
 512 #
 513 # This function is used to set up a directory with switching headers
 514 #
 515 ###################################################
 516
 517 def make_switching_dir(dirname, switch_headers, env):
 518     # Generate the header.  target[0] is the full path of the output
 519     # header to generate.  'source' is a dummy variable, since we get the
 520     # list of ISAs from env['ALL_ISA_LIST'].
 521     def gen_switch_hdr(target, source, env):
 522         fname = str(target[0])
 523         basename = os.path.basename(fname)
 524         f = open(fname, 'w')
 525         f.write('#include "arch/isa_specific.hh"\n')
 526         cond = '#if'
 527         for isa in env['ALL_ISA_LIST']:
 528             f.write('%s THE_ISA == %s_ISA\n#include "%s/%s/%s"\n'
 529                     % (cond, isa.upper(), dirname, isa, basename))
 530             cond = '#elif'
 531         f.write('#else\n#error "THE_ISA not set"\n#endif\n')
 532         f.close()
 533         return 0
 534
 535     # String to print when generating header
 536     def gen_switch_hdr_string(target, source, env):
 537         return "Generating switch header " + str(target[0])
 538
 539     # Build SCons Action object. 'varlist' specifies env vars that this
 540     # action depends on; when env['ALL_ISA_LIST'] changes these actions
 541     # should get re-executed.
 542     switch_hdr_action = Action(gen_switch_hdr, gen_switch_hdr_string,
 543                                varlist=['ALL_ISA_LIST'])
 544
 545     # Instantiate actions for each header
 546     for hdr in switch_headers:
 547         env.Command(hdr, [], switch_hdr_action)
 548
 549 env.make_switching_dir = make_switching_dir
 550
 551 ###################################################
 552 #
 553 # Define build environments for selected configurations.
 554 #
 555 ###################################################
 556
 557 # rename base env
 558 base_env = env
 559
 560 for build_path in build_paths:
 561     print "Building in", build_path
 562     # build_dir is the tail component of build path, and is used to
 563     # determine the build parameters (e.g., 'ALPHA_SE')
 564     (build_root, build_dir) = os.path.split(build_path)
 565     # Make a copy of the build-root environment to use for this config.
 566     env = base_env.Copy()
 567
 568     # Set env options according to the build directory config.
 569     sticky_opts.files = []
 570     # Options for $BUILD_ROOT/$BUILD_DIR are stored in
 571     # $BUILD_ROOT/options/$BUILD_DIR so you can nuke
 572     # $BUILD_ROOT/$BUILD_DIR without losing your options settings.
 573     current_opts_file = joinpath(build_root, 'options', build_dir)
 574     if os.path.isfile(current_opts_file):
 575         sticky_opts.files.append(current_opts_file)
 576         print "Using saved options file %s" % current_opts_file
 577     else:
 578         # Build dir-specific options file doesn't exist.
 579
 580         # Make sure the directory is there so we can create it later
 581         opt_dir = os.path.dirname(current_opts_file)
 582         if not os.path.isdir(opt_dir):
 583             os.mkdir(opt_dir)
 584
 585         # Get default build options from source tree.  Options are
 586         # normally determined by name of $BUILD_DIR, but can be
 587         # overriden by 'default=' arg on command line.
 588         default_opts_file = joinpath('build_opts',
 589                                      ARGUMENTS.get('default', build_dir))
 590         if os.path.isfile(default_opts_file):
 591             sticky_opts.files.append(default_opts_file)
 592             print "Options file %s not found,\n  using defaults in %s" \
 593                   % (current_opts_file, default_opts_file)
 594         else:
 595             print "Error: cannot find options file %s or %s" \
 596                   % (current_opts_file, default_opts_file)
 597             Exit(1)
 598
 599     # Apply current option settings to env
 600     sticky_opts.Update(env)
 601     nonsticky_opts.Update(env)
 602
 603     help_text += "Sticky options for %s:\n" % build_dir \
 604                  + sticky_opts.GenerateHelpText(env) \
 605                  + "\nNon-sticky options for %s:\n" % build_dir \
 606                  + nonsticky_opts.GenerateHelpText(env)
 607
 608     # Process option settings.
 609
 610     if not have_fenv and env['USE_FENV']:
 611         print "Warning: <fenv.h> not available; " \
 612               "forcing USE_FENV to False in", build_dir + "."
 613         env['USE_FENV'] = False
 614
 615     if not env['USE_FENV']:
 616         print "Warning: No IEEE FP rounding mode control in", build_dir + "."
 617         print "         FP results may deviate slightly from other platforms."
 618
 619     if env['EFENCE']:
 620         env.Append(LIBS=['efence'])
 621
 622     if env['USE_MYSQL']:
 623         if not have_mysql:
 624             print "Warning: MySQL not available; " \
 625                   "forcing USE_MYSQL to False in", build_dir + "."
 626             env['USE_MYSQL'] = False
 627         else:
 628             print "Compiling in", build_dir, "with MySQL support."
 629             env.ParseConfig(mysql_config_libs)
 630             env.ParseConfig(mysql_config_include)
 631
 632     # Save sticky option settings back to current options file
 633     sticky_opts.Save(current_opts_file, env)
 634
 635     # Do this after we save setting back, or else we'll tack on an
 636     # extra 'qdo' every time we run scons.
 637     if env['BATCH']:
 638         env['CC']  = env['BATCH_CMD'] + ' ' + env['CC']
 639         env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX']
 640
 641     if env['USE_SSE2']:
 642         env.Append(CCFLAGS='-msse2')
 643
 644     # The src/SConscript file sets up the build rules in 'env' according
 645     # to the configured options.  It returns a list of environments,
 646     # one for each variant build (debug, opt, etc.)
 647     envList = SConscript('src/SConscript', build_dir = build_path,
 648                          exports = 'env')
 649
 650     # Set up the regression tests for each build.
 651     for e in envList:
 652         SConscript('tests/SConscript',
 653                    build_dir = joinpath(build_path, 'tests', e.Label),
 654                    exports = { 'env' : e }, duplicate = False)
 655
 656 Help(help_text)
 657
 658
 659 ###################################################
 660 #
 661 # Let SCons do its thing.  At this point SCons will use the defined
 662 # build environments to build the requested targets.
 663 #
 664 ###################################################
 665