4 # Copyright (c) 2005-2009 United States Government as represented by
5 # the U.S. Army Research Laboratory.
7 # Redistribution and use in source and binary forms, with or without
8 # modification, are permitted provided that the following conditions
11 # 1. Redistributions of source code must retain the above copyright
12 # notice, this list of conditions and the following disclaimer.
14 # 2. Redistributions in binary form must reproduce the above
15 # copyright notice, this list of conditions and the following
16 # disclaimer in the documentation and/or other materials provided
17 # with the distribution.
19 # 3. The name of the author may not be used to endorse or promote
20 # products derived from this software without specific prior written
23 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
24 # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
27 # DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
29 # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
31 # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
32 # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
33 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 # Script for automatically preparing the sources for compilation by
38 # performing the myriad of necessary steps. The script attempts to
39 # detect proper version support, and outputs warnings about particular
40 # systems that have autotool peculiarities.
42 # Basically, if everything is set up and installed correctly, the
43 # script will validate that minimum versions of the GNU Build System
44 # tools are installed, account for several common configuration
45 # issues, and then simply run autoreconf for you.
47 # If autoreconf fails, which can happen for many valid configurations,
48 # this script proceeds to run manual preparation steps effectively
49 # providing a POSIX shell script (mostly complete) reimplementation of
52 # The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
53 # environment variables and corresponding _OPTIONS variables (e.g.
54 # AUTORECONF_OPTIONS) may be used to override the default automatic
55 # detection behaviors. Similarly the _VERSION variables will override
56 # the minimum required version numbers.
60 # To obtain help on usage:
63 # To obtain verbose output:
64 # ./autogen.sh --verbose
66 # To skip autoreconf and prepare manually:
67 # AUTORECONF=false ./autogen.sh
69 # To verbosely try running with an older (unsupported) autoconf:
70 # AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
73 # Christopher Sean Morrison <morrison@brlcad.org>
76 # Sebastian Pipping <sebastian@pipping.org>
78 ######################################################################
80 # set to minimum acceptable version of autoconf
81 if [ "x$AUTOCONF_VERSION" = "x" ] ; then
82 # AUTOCONF_VERSION=2.52
85 # set to minimum acceptable version of automake
86 if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
87 # AUTOMAKE_VERSION=1.6.0
90 # set to minimum acceptable version of libtool
91 if [ "x$LIBTOOL_VERSION" = "x" ] ; then
92 # LIBTOOL_VERSION=1.4.2
101 # extract copyright from header
102 __copyright
="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
103 if [ "x$__copyright" = "x" ] ; then
104 __copyright
="`date +%Y`"
107 # extract version from CVS Id string
108 __id
="$Id: autogen.sh 33925 2009-03-01 23:27:06Z brlcad $"
109 __version
="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
110 if [ "x$__version" = "x" ] ; then
114 echo "autogen.sh build preparation script by Christopher Sean Morrison"
115 echo " + config.guess download patch by Sebastian Pipping (2008-12-03)"
116 echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
117 echo "script version $__version, ISO/IEC 9945 POSIX shell script"
125 echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [-d|--download] [--version]"
126 echo " --help Help on $NAME_OF_AUTOGEN usage"
127 echo " --verbose Verbose progress output"
128 echo " --quiet Quiet suppressed progress output"
129 echo " --download Download the latest config.guess from gnulib"
130 echo " --version Only perform GNU Build System version checks"
132 echo "Description: This script will validate that minimum versions of the"
133 echo "GNU Build System tools are installed and then run autoreconf for you."
134 echo "Should autoreconf fail, manual preparation steps will be run"
135 echo "potentially accounting for several common preparation issues. The"
137 echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
138 echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
139 echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
140 echo "default automatic detection behavior."
149 ##########################
150 # VERSION_ERROR FUNCTION #
151 ##########################
153 if [ "x$1" = "x" ] ; then
154 echo "INTERNAL ERROR: version_error was not provided a version"
157 if [ "x$2" = "x" ] ; then
158 echo "INTERNAL ERROR: version_error was not provided an application name"
162 $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
163 $ECHO " at least version $1 of $2 must be installed."
165 $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
166 $ECHO "run configure or make. Either the GNU Autotools will need to be installed"
167 $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
168 $ECHO "code on another system and then transferred to here. -- Cheers!"
172 ##########################
173 # VERSION_CHECK FUNCTION #
174 ##########################
176 if [ "x$1" = "x" ] ; then
177 echo "INTERNAL ERROR: version_check was not provided a minimum version"
181 if [ "x$2" = "x" ] ; then
182 echo "INTERNAL ERROR: version check was not provided a comparison version"
187 # needed to handle versions like 1.10 and 1.4-p6
188 _min
="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
189 _cur
="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
191 _min_major
="`echo $_min | cut -d. -f1`"
192 _min_minor
="`echo $_min | cut -d. -f2`"
193 _min_patch
="`echo $_min | cut -d. -f3`"
195 _cur_major
="`echo $_cur | cut -d. -f1`"
196 _cur_minor
="`echo $_cur | cut -d. -f2`"
197 _cur_patch
="`echo $_cur | cut -d. -f3`"
199 if [ "x$_min_major" = "x" ] ; then
202 if [ "x$_min_minor" = "x" ] ; then
205 if [ "x$_min_patch" = "x" ] ; then
208 if [ "x$_cur_minor" = "x" ] ; then
211 if [ "x$_cur_minor" = "x" ] ; then
214 if [ "x$_cur_patch" = "x" ] ; then
218 $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
220 if [ $_min_major -lt $_cur_major ] ; then
222 elif [ $_min_major -eq $_cur_major ] ; then
223 if [ $_min_minor -lt $_cur_minor ] ; then
225 elif [ $_min_minor -eq $_cur_minor ] ; then
226 if [ $_min_patch -lt $_cur_patch ] ; then
228 elif [ $_min_patch -eq $_cur_patch ] ; then
237 ######################################
238 # LOCATE_CONFIGURE_TEMPLATE FUNCTION #
239 ######################################
240 locate_configure_template
( ) {
242 if test -f "./configure.ac" ; then
243 echo "./configure.ac"
244 elif test -f "./configure.in" ; then
245 echo "./configure.in"
246 elif test -f "$_pwd/configure.ac" ; then
247 echo "$_pwd/configure.ac"
248 elif test -f "$_pwd/configure.in" ; then
249 echo "$_pwd/configure.in"
250 elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
251 echo "$PATH_TO_AUTOGEN/configure.ac"
252 elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
253 echo "$PATH_TO_AUTOGEN/configure.in"
262 PATH_TO_AUTOGEN
="`dirname $0`"
263 NAME_OF_AUTOGEN
="`basename $0`"
264 AUTOGEN_SH
="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
266 LIBTOOL_M4
="${PATH_TO_AUTOGEN}/misc/libtool.m4"
268 if [ "x$HELP" = "x" ] ; then
271 if [ "x$QUIET" = "x" ] ; then
274 if [ "x$VERBOSE" = "x" ] ; then
277 if [ "x$VERSION_ONLY" = "x" ] ; then
280 if [ "x$DOWNLOAD" = "x" ] ; then
283 if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
284 AUTORECONF_OPTIONS
="-i -f"
286 if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
287 AUTOCONF_OPTIONS
="-f"
289 if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
290 AUTOMAKE_OPTIONS
="-a -c -f"
292 ALT_AUTOMAKE_OPTIONS
="-a -c"
293 if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
294 LIBTOOLIZE_OPTIONS
="--automake -c -f"
296 ALT_LIBTOOLIZE_OPTIONS
="--automake --copy --force"
297 if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
300 if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
301 AUTOHEADER_OPTIONS
=""
303 if [ "x$CONFIG_GUESS_URL" = "x" ] ; then
304 CONFIG_GUESS_URL
="http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=build-aux/config.guess;hb=HEAD"
306 for arg
in $ARGS ; do
310 x--quiet
) QUIET
=yes ;;
312 x--verbose
) VERBOSE
=yes ;;
313 x-
[dD
]) DOWNLOAD
=yes ;;
314 x--download
) DOWNLOAD
=yes ;;
315 x-
[vV
]) VERBOSE
=yes ;;
316 x--version
) VERSION_ONLY
=yes ;;
318 echo "Unknown option: $arg"
327 #####################
328 # environment check #
329 #####################
331 # sanity check before recursions potentially begin
332 if [ ! -f "$AUTOGEN_SH" ] ; then
333 echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
334 if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
335 echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
340 # force locale setting to C so things like date output as expected
343 # commands that this script expects
344 for __cmd
in echo head tail pwd ; do
345 echo "test" |
$__cmd > /dev
/null
2>&1
346 if [ $?
!= 0 ] ; then
347 echo "INTERNAL ERROR: '${__cmd}' command is required"
351 echo "test" |
grep "test" > /dev
/null
2>&1
352 if test ! x$?
= x0
; then
353 echo "INTERNAL ERROR: grep command is required"
356 echo "test" |
sed "s/test/test/" > /dev
/null
2>&1
357 if test ! x$?
= x0
; then
358 echo "INTERNAL ERROR: sed command is required"
363 # determine the behavior of echo
364 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
365 *c
*,-n*) ECHO_N
= ECHO_C
='
367 *c
*,* ) ECHO_N
=-n ECHO_C
= ECHO_T
= ;;
368 *) ECHO_N
= ECHO_C
='\c' ECHO_T
= ;;
371 # determine the behavior of head
372 case "x`echo 'head' | head -n 1 2>&1`" in
373 *xhead
*) HEAD_N
="n " ;;
377 # determine the behavior of tail
378 case "x`echo 'tail' | tail -n 1 2>&1`" in
379 *xtail
*) TAIL_N
="n " ;;
385 if [ "x$QUIET" = "xyes" ] ; then
386 if [ "x$VERBOSE" = "xyes" ] ; then
387 echo "Verbose output quelled by quiet option. Further output disabled."
391 if [ "x$VERBOSE" = "xyes" ] ; then
392 echo "Verbose output enabled"
398 # allow a recursive run to disable further recursions
399 if [ "x$RUN_RECURSIVE" = "x" ] ; then
404 ################################################
405 # check for help arg and bypass version checks #
406 ################################################
407 if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
410 if [ "x$HELP" = "xyes" ] ; then
413 $ECHO "Help was requested. No preparation or configuration will be performed."
418 #######################
419 # set up signal traps #
420 #######################
421 untrap_abnormal
( ) {
422 for sig
in 1 2 13 15; do
427 # do this cleanup whenever we exit.
429 # start from the root
430 if test -d "$START_PATH" ; then
434 # restore/delete backup files
435 if test "x$PFC_INIT" = "x1" ; then
440 # trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
441 for sig
in 1 2 13 15; do
444 $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
446 # start from the root
447 if test -d "$START_PATH" ; then
451 # clean up on abnormal exit
452 $VERBOSE_ECHO "rm -rf autom4te.cache"
453 rm -rf autom4te.cache
455 if test -f "acinclude.m4.$$.backup" ; then
456 $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
457 chmod u+w acinclude.m4
458 cat acinclude.m4.$$.backup > acinclude.m4
460 $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
461 rm -f acinclude.m4.$$.backup
464 { (exit 1); exit 1; }
469 #############################
470 # look for a configure file #
471 #############################
472 if [ "x$CONFIGURE" = "x" ] ; then
473 CONFIGURE
="`locate_configure_template`"
474 if [ ! "x$CONFIGURE" = "x" ] ; then
475 $VERBOSE_ECHO "Found a configure template: $CONFIGURE"
478 $ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
480 if [ "x$CONFIGURE" = "x" ] ; then
481 if [ "x$VERSION_ONLY" = "xyes" ] ; then
485 $ECHO "A configure.ac or configure.in file could not be located implying"
486 $ECHO "that the GNU Build System is at least not used in this directory. In"
487 $ECHO "any case, there is nothing to do here without one of those files."
489 $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
497 if [ "x$PROJECT" = "x" ] ; then
498 PROJECT
="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
499 if [ "x$PROJECT" = "xAC_INIT" ] ; then
500 # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
501 PROJECT
="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
503 if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
506 if [ "x$PROJECT" = "x" ] ; then
510 $ECHO "Using PROJECT environment variable override: $PROJECT"
512 $ECHO "Preparing the $PROJECT build system...please wait"
516 ########################
517 # check for autoreconf #
518 ########################
520 if [ "x$AUTORECONF" = "x" ] ; then
521 for AUTORECONF
in autoreconf
; do
522 $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
523 $AUTORECONF --version > /dev
/null
2>&1
531 $ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
535 ##########################
536 # autoconf version check #
537 ##########################
539 if [ "x$AUTOCONF" = "x" ] ; then
540 for AUTOCONF
in autoconf
; do
541 $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
542 $AUTOCONF --version > /dev
/null
2>&1
550 $ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
554 if [ ! "x$_acfound" = "xyes" ] ; then
555 $ECHO "ERROR: Unable to locate GNU Autoconf."
558 _version
="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
559 if [ "x$_version" = "x" ] ; then
562 $ECHO "Found GNU Autoconf version $_version"
563 version_check
"$AUTOCONF_VERSION" "$_version"
564 if [ $?
-ne 0 ] ; then
568 if [ "x$_report_error" = "xyes" ] ; then
569 version_error
"$AUTOCONF_VERSION" "GNU Autoconf"
574 ##########################
575 # automake version check #
576 ##########################
578 if [ "x$AUTOMAKE" = "x" ] ; then
579 for AUTOMAKE
in automake
; do
580 $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
581 $AUTOMAKE --version > /dev
/null
2>&1
589 $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
594 if [ ! "x$_amfound" = "xyes" ] ; then
596 $ECHO "ERROR: Unable to locate GNU Automake."
599 _version
="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
600 if [ "x$_version" = "x" ] ; then
603 $ECHO "Found GNU Automake version $_version"
604 version_check
"$AUTOMAKE_VERSION" "$_version"
605 if [ $?
-ne 0 ] ; then
609 if [ "x$_report_error" = "xyes" ] ; then
610 version_error
"$AUTOMAKE_VERSION" "GNU Automake"
615 ########################
616 # check for libtoolize #
617 ########################
619 HAVE_ALT_LIBTOOLIZE
=no
621 if [ "x$LIBTOOLIZE" = "x" ] ; then
622 LIBTOOLIZE
=libtoolize
623 $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
624 $LIBTOOLIZE --version > /dev
/null
2>&1
625 if [ ! $?
= 0 ] ; then
628 if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
629 $ECHO "Warning: libtoolize does not appear to be available."
631 $ECHO "Warning: libtoolize does not appear to be available. This means that"
632 $ECHO "the automatic build preparation via autoreconf will probably not work."
633 $ECHO "Preparing the build by running each step individually, however, should"
634 $ECHO "work and will be done automatically for you if autoreconf fails."
637 # look for some alternates
638 for tool
in glibtoolize libtoolize15 libtoolize14 libtoolize13
; do
639 $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
640 _glibtoolize
="`$tool --version > /dev/null 2>&1`"
642 $VERBOSE_ECHO "Found $tool --version"
643 _glti
="`which $tool`"
644 if [ "x$_glti" = "x" ] ; then
645 $VERBOSE_ECHO "Cannot find $tool with which"
648 if test ! -f "$_glti" ; then
649 $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
652 _gltidir
="`dirname $_glti`"
653 if [ "x$_gltidir" = "x" ] ; then
654 $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
657 if test ! -d "$_gltidir" ; then
658 $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
661 HAVE_ALT_LIBTOOLIZE
=yes
664 $ECHO "Fortunately, $tool was found which means that your system may simply"
665 $ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
666 $ECHO "sufficient system access, it may be possible to quell this warning by"
669 sudo
-V > /dev
/null
2>&1
671 $ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
674 $ECHO " ln -s $_glti $_gltidir/libtoolize"
676 $ECHO "Run that as root or with proper permissions to the $_gltidir directory"
688 $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
692 ############################
693 # libtoolize version check #
694 ############################
696 if [ ! "x$_ltfound" = "xyes" ] ; then
698 $ECHO "ERROR: Unable to locate GNU Libtool."
701 _version
="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
702 if [ "x$_version" = "x" ] ; then
705 $ECHO "Found GNU Libtool version $_version"
706 version_check
"$LIBTOOL_VERSION" "$_version"
707 if [ $?
-ne 0 ] ; then
711 if [ "x$_report_error" = "xyes" ] ; then
712 version_error
"$LIBTOOL_VERSION" "GNU Libtool"
717 #####################
718 # check for aclocal #
719 #####################
720 if [ "x$ACLOCAL" = "x" ] ; then
721 for ACLOCAL
in aclocal
; do
722 $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
723 $ACLOCAL --version > /dev
/null
2>&1
729 $ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
733 ########################
734 # check for autoheader #
735 ########################
736 if [ "x$AUTOHEADER" = "x" ] ; then
737 for AUTOHEADER
in autoheader
; do
738 $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
739 $AUTOHEADER --version > /dev
/null
2>&1
745 $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
749 #########################
750 # check if version only #
751 #########################
752 $VERBOSE_ECHO "Checking whether to only output version information"
753 if [ "x$VERSION_ONLY" = "xyes" ] ; then
757 $ECHO "Version requested. No preparation or configuration will be performed."
762 #################################
763 # PROTECT_FROM_CLOBBER FUNCTION #
764 #################################
765 protect_from_clobber
( ) {
768 # protect COPYING & INSTALL from overwrite by automake. the
769 # automake force option will (inappropriately) ignore the existing
770 # contents of a COPYING and/or INSTALL files (depending on the
771 # version) instead of just forcing *missing* files like it does
772 # for AUTHORS, NEWS, and README. this is broken but extremely
773 # prevalent behavior, so we protect against it by keeping a backup
774 # of the file that can later be restored.
776 for file in COPYING INSTALL
; do
777 if test -f ${file} ; then
778 if test -f ${file}.$$.protect_from_automake.backup
; then
779 $VERBOSE_ECHO "Already backed up ${file} in `pwd`"
781 $VERBOSE_ECHO "Backing up ${file} in `pwd`"
782 $VERBOSE_ECHO "cp -p ${file} ${file}.$$.protect_from_automake.backup"
783 cp -p ${file} ${file}.$$.protect_from_automake.backup
790 ##############################
791 # RECURSIVE_PROTECT FUNCTION #
792 ##############################
793 recursive_protect
( ) {
795 # for projects using recursive configure, run the build
796 # preparation steps for the subdirectories. this function assumes
797 # START_PATH was set to pwd before recursion begins so that
798 # relative paths work.
800 # git 'r done, protect COPYING and INSTALL from being clobbered
803 if test -d autom4te.cache
; then
804 $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
805 $VERBOSE_ECHO "rm -rf autom4te.cache"
806 rm -rf autom4te.cache
809 # find configure template
810 _configure
="`locate_configure_template`"
811 if [ "x$_configure" = "x" ] ; then
814 # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
817 # $VERBOSE_ECHO "Looking for subdirs in `pwd`"
818 _det_config_subdirs
="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
820 for dir
in $_det_config_subdirs ; do
821 if test -d "`pwd`/$dir" ; then
822 CHECK_DIRS
="$CHECK_DIRS \"`pwd`/$dir\""
827 if [ ! "x$CHECK_DIRS" = "x" ] ; then
828 $VERBOSE_ECHO "Recursively scanning the following directories:"
829 $VERBOSE_ECHO " $CHECK_DIRS"
830 for dir
in $CHECK_DIRS ; do
831 $VERBOSE_ECHO "Protecting files from automake in $dir"
835 # recursively git 'r done
839 } # end of recursive_protect
842 #############################
843 # RESTORE_CLOBBERED FUNCION #
844 #############################
845 restore_clobbered
( ) {
847 # The automake (and autoreconf by extension) -f/--force-missing
848 # option may overwrite COPYING and INSTALL even if they do exist.
849 # Here we restore the files if necessary.
853 for file in COPYING INSTALL
; do
854 if test -f ${file}.$$.protect_from_automake.backup
; then
855 if test -f ${file} ; then
856 # compare entire content, restore if needed
857 if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then
858 if test "x$spacer" = "xno" ; then
863 $VERBOSE_ECHO "Restoring ${file} from backup (automake -f likely clobbered it)"
864 $VERBOSE_ECHO "rm -f ${file}"
866 $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}"
867 mv ${file}.$$.protect_from_automake.backup
${file}
869 elif test -f ${file}.$$.protect_from_automake.backup
; then
870 $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}"
871 mv ${file}.$$.protect_from_automake.backup
${file}
875 $VERBOSE_ECHO "rm -f ${file}.$$.protect_from_automake.backup"
876 rm -f ${file}.$$.protect_from_automake.backup
877 fi # -f ${file}.$$.protect_from_automake.backup
880 CONFIGURE
="`locate_configure_template`"
881 if [ "x$CONFIGURE" = "x" ] ; then
885 _aux_dir
="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
886 if test ! -d "$_aux_dir" ; then
890 for file in config.guess config.sub ltmain.sh
; do
891 if test -f "${_aux_dir}/${file}" ; then
892 $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
893 rm -f "${_aux_dir}/${file}.backup"
896 } # end of restore_clobbered
899 ##############################
900 # RECURSIVE_RESTORE FUNCTION #
901 ##############################
902 recursive_restore
( ) {
904 # restore COPYING and INSTALL from backup if they were clobbered
905 # for each directory recursively.
910 # find configure template
911 _configure
="`locate_configure_template`"
912 if [ "x$_configure" = "x" ] ; then
917 _det_config_subdirs
="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
919 for dir
in $_det_config_subdirs ; do
920 if test -d "`pwd`/$dir" ; then
921 CHECK_DIRS
="$CHECK_DIRS \"`pwd`/$dir\""
926 if [ ! "x$CHECK_DIRS" = "x" ] ; then
927 $VERBOSE_ECHO "Recursively scanning the following directories:"
928 $VERBOSE_ECHO " $CHECK_DIRS"
929 for dir
in $CHECK_DIRS ; do
930 $VERBOSE_ECHO "Checking files for automake damage in $dir"
934 # recursively git 'r undone
938 } # end of recursive_restore
941 #######################
942 # INITIALIZE FUNCTION #
943 #######################
946 # this routine performs a variety of directory-specific
947 # initializations. some are sanity checks, some are preventive,
948 # and some are necessary setup detection.
950 # this function sets:
955 ##################################
956 # check for a configure template #
957 ##################################
958 CONFIGURE
="`locate_configure_template`"
959 if [ "x$CONFIGURE" = "x" ] ; then
961 $ECHO "A configure.ac or configure.in file could not be located implying"
962 $ECHO "that the GNU Build System is at least not used in this directory. In"
963 $ECHO "any case, there is nothing to do here without one of those files."
965 $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
969 #####################
970 # detect an aux dir #
971 #####################
972 _aux_dir
="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
973 if test ! -d "$_aux_dir" ; then
976 $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
979 ################################
980 # detect a recursive configure #
981 ################################
983 _det_config_subdirs
="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
984 for dir
in $_det_config_subdirs ; do
985 if test -d "`pwd`/$dir" ; then
986 $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
987 CONFIG_SUBDIRS
="$CONFIG_SUBDIRS `pwd`/$dir"
991 ###########################################################
992 # make sure certain required files exist for GNU projects #
993 ###########################################################
995 _marker_found_message_intro
='Detected non-GNU marker "'
996 _marker_found_message_mid
='" in '
997 for marker
in foreign cygnus
; do
998 _marker_found_message
=${_marker_found_message_intro}${marker}${_marker_found_message_mid}
999 _marker_found
="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`"
1000 if [ ! "x$_marker_found" = "x" ] ; then
1001 $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`"
1004 if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then
1005 _marker_found
="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`"
1006 if [ ! "x$_marker_found" = "x" ] ; then
1007 $VERBOSE_ECHO "${_marker_found_message}Makefile.am"
1012 if [ "x${_marker_found}" = "x" ] ; then
1014 for file in AUTHORS COPYING ChangeLog INSTALL NEWS README
; do
1015 if [ ! -f $file ] ; then
1016 $VERBOSE_ECHO "Touching ${file} since it does not exist"
1017 _suggest_foreign
=yes
1022 if [ "x${_suggest_foreign}" = "xyes" ] ; then
1024 $ECHO "Warning: Several files expected of projects that conform to the GNU"
1025 $ECHO "coding standards were not found. The files were automatically added"
1026 $ECHO "for you since you do not have a 'foreign' declaration specified."
1028 $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`"
1029 if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then
1030 $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file."
1036 ##################################################
1037 # make sure certain generated files do not exist #
1038 ##################################################
1039 for file in config.guess config.sub ltmain.sh
; do
1040 if test -f "${_aux_dir}/${file}" ; then
1041 $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
1042 mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
1046 ############################
1047 # search alternate m4 dirs #
1048 ############################
1051 if [ -d $dir ] ; then
1052 $VERBOSE_ECHO "Found extra aclocal search directory: $dir"
1053 SEARCH_DIRS
="$SEARCH_DIRS -I $dir"
1057 ######################################
1058 # remove any previous build products #
1059 ######################################
1060 if test -d autom4te.cache
; then
1061 $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
1062 $VERBOSE_ECHO "rm -rf autom4te.cache"
1063 rm -rf autom4te.cache
1065 # tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
1066 # if test -f aclocal.m4 ; then
1067 # $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
1068 # $VERBOSE_ECHO "rm -f aclocal.m4"
1072 } # end of initialize()
1082 # Before running autoreconf or manual steps, some prep detection work
1083 # is necessary or useful. Only needs to occur once per directory, but
1084 # does need to traverse the entire subconfigure hierarchy to protect
1085 # files from being clobbered even by autoreconf.
1088 # start from where we started
1091 # get ready to process
1095 #########################################
1096 # DOWNLOAD_GNULIB_CONFIG_GUESS FUNCTION #
1097 #########################################
1099 # TODO - should make sure wget/curl exist and/or work before trying to
1102 download_gnulib_config_guess
() {
1103 # abuse gitweb to download gnulib's latest config.guess via HTTP
1104 config_guess_temp
="config.guess.$$.download"
1106 for __cmd
in wget curl fetch
; do
1107 $VERBOSE_ECHO "Checking for command ${__cmd}"
1108 ${__cmd} --version > /dev
/null
2>&1
1110 if [ ! $ret = 0 ] ; then
1114 __cmd_version
=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'`
1115 $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}"
1130 $VERBOSE_ECHO "Running $__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\""
1131 eval "$__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" > /dev
/null
2>&1
1132 if [ $?
= 0 ] ; then
1133 mv -f "${config_guess_temp}" ${_aux_dir}/config.guess
1139 if [ ! $ret = 0 ] ; then
1140 $ECHO "Warning: config.guess download failed from: $CONFIG_GUESS_URL"
1141 rm -f "${config_guess_temp}"
1146 ##############################
1147 # LIBTOOLIZE_NEEDED FUNCTION #
1148 ##############################
1149 libtoolize_needed
() {
1150 ret
=1 # means no, don't need libtoolize
1151 for feature
in AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT
; do
1152 $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
1153 found
="`grep \"^$feature.*\" $CONFIGURE`"
1154 if [ ! "x$found" = "x" ] ; then
1155 ret
=0 # means yes, need to run libtoolize
1164 ############################################
1165 # prepare build via autoreconf or manually #
1166 ############################################
1167 reconfigure_manually
=no
1168 if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
1170 $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
1172 $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
1173 autoreconf_output
="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
1175 $VERBOSE_ECHO "$autoreconf_output"
1177 if [ ! $ret = 0 ] ; then
1178 if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
1179 if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
1181 $ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
1182 $ECHO "misconfiguration issue. This problem is encountered on systems that"
1183 $ECHO "have installed libtoolize under a different name without providing a"
1184 $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
1186 $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
1190 export RUN_RECURSIVE
1193 $VERBOSE_ECHO sh
$AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
1194 sh
"$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
1199 $ECHO "Warning: $AUTORECONF failed"
1201 if test -f ltmain.sh
; then
1202 $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
1205 $ECHO "Attempting to run the preparation steps individually"
1206 reconfigure_manually
=yes
1208 if [ "x$DOWNLOAD" = "xyes" ] ; then
1209 if libtoolize_needed
; then
1210 download_gnulib_config_guess
1215 reconfigure_manually
=yes
1219 ############################
1220 # LIBTOOL_FAILURE FUNCTION #
1221 ############################
1222 libtool_failure
( ) {
1224 # libtool is rather error-prone in comparison to the other
1225 # autotools and this routine attempts to compensate for some
1226 # common failures. the output after a libtoolize failure is
1227 # parsed for an error related to AC_PROG_LIBTOOL and if found, we
1228 # attempt to inject a project-provided libtool.m4 file.
1230 _autoconf_output
="$1"
1232 if [ "x$RUN_RECURSIVE" = "xno" ] ; then
1233 # we already tried the libtool.m4, don't try again
1237 if test -f "$LIBTOOL_M4" ; then
1238 found_libtool
="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
1239 if test ! "x$found_libtool" = "x" ; then
1240 if test -f acinclude.
m4 ; then
1241 rm -f acinclude.
m4.$$.backup
1242 $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
1243 cat acinclude.
m4 > acinclude.
m4.$$.backup
1245 $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
1246 chmod u
+w acinclude.
m4
1247 cat "$LIBTOOL_M4" >> acinclude.
m4
1249 # don't keep doing this
1251 export RUN_RECURSIVE
1255 $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
1256 $VERBOSE_ECHO sh
$AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
1257 sh
"$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
1264 ###########################
1265 # MANUAL_AUTOGEN FUNCTION #
1266 ###########################
1267 manual_autogen
( ) {
1269 ##################################################
1270 # Manual preparation steps taken are as follows: #
1272 # libtoolize --automake -c -f #
1276 # automake -a -c -f #
1277 ##################################################
1282 $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
1283 aclocal_output
="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
1285 $VERBOSE_ECHO "$aclocal_output"
1286 if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
1291 if libtoolize_needed
; then
1292 if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
1293 $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
1294 libtoolize_output
="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
1296 $VERBOSE_ECHO "$libtoolize_output"
1298 if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
1300 if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
1301 $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
1302 libtoolize_output
="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
1304 $VERBOSE_ECHO "$libtoolize_output"
1306 if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
1313 # re-run again as instructed by libtoolize
1314 $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
1315 aclocal_output
="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
1317 $VERBOSE_ECHO "$aclocal_output"
1319 # libtoolize might put ltmain.sh in the wrong place
1320 if test -f ltmain.sh
; then
1321 if test ! -f "${_aux_dir}/ltmain.sh" ; then
1323 $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
1325 $ECHO "Fortunately, the problem can be worked around by simply copying the"
1326 $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
1328 $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
1329 cp -p ltmain.sh
"${_aux_dir}/ltmain.sh"
1330 $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
1334 if [ "x$DOWNLOAD" = "xyes" ] ; then
1335 download_gnulib_config_guess
1337 fi # libtoolize_needed
1343 $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
1344 autoconf_output
="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
1346 $VERBOSE_ECHO "$autoconf_output"
1348 if [ ! $ret = 0 ] ; then
1349 # retry without the -f and check for usage of macros that are too new
1350 ac2_59_macros
="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
1351 ac2_55_macros
="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
1352 ac2_54_macros
="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
1355 ac_major
="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
1356 ac_minor
="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
1358 if [ $ac_major -lt 2 ] ; then
1359 macros_to_search
="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
1361 if [ $ac_minor -lt 54 ] ; then
1362 macros_to_search
="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
1363 elif [ $ac_minor -lt 55 ] ; then
1364 macros_to_search
="$ac2_59_macros $ac2_55_macros"
1365 elif [ $ac_minor -lt 59 ] ; then
1366 macros_to_search
="$ac2_59_macros"
1370 configure_ac_macros
=__none__
1371 for feature
in $macros_to_search ; do
1372 $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
1373 found
="`grep \"^$feature.*\" $CONFIGURE`"
1374 if [ ! "x$found" = "x" ] ; then
1375 if [ "x$configure_ac_macros" = "x__none__" ] ; then
1376 configure_ac_macros
="$feature"
1378 configure_ac_macros
="$feature $configure_ac_macros"
1382 if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
1384 $ECHO "Warning: Unsupported macros were found in $CONFIGURE"
1386 $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any"
1387 $ECHO "unsupported macros are used that exceed the minimum version"
1388 $ECHO "settings specified within this file. As such, the following macros"
1389 $ECHO "should be removed from configure.ac or the version numbers in this"
1390 $ECHO "file should be increased:"
1392 $ECHO "$configure_ac_macros"
1394 $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
1401 $VERBOSE_ECHO "$AUTOCONF"
1402 autoconf_output
="`$AUTOCONF 2>&1`"
1404 $VERBOSE_ECHO "$autoconf_output"
1406 if [ ! $ret = 0 ] ; then
1407 # test if libtool is busted
1408 libtool_failure
"$autoconf_output"
1410 # let the user know what went wrong
1414 $ECHO "ERROR: $AUTOCONF failed"
1417 # autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
1419 $ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
1420 $ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
1422 $ECHO "Removing those options should not be necessary and indicate some other"
1423 $ECHO "problem with the build system. The build preparation is highly suspect"
1424 $ECHO "and may result in configuration or compilation errors. Consider"
1425 if [ "x$VERBOSE_ECHO" = "x:" ] ; then
1426 $ECHO "rerunning the build preparation with verbose output enabled."
1427 $ECHO " $AUTOGEN_SH --verbose"
1429 $ECHO "reviewing the minimum GNU Autotools version settings contained in"
1430 $ECHO "this script along with the macros being used in your `basename \"$CONFIGURE\"` file."
1433 $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
1434 fi # autoconf ret = 0
1435 fi # autoconf ret = 0
1441 for feature
in AM_CONFIG_HEADER AC_CONFIG_HEADER
; do
1442 $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
1443 found
="`grep \"^$feature.*\" $CONFIGURE`"
1444 if [ ! "x$found" = "x" ] ; then
1449 if [ "x$need_autoheader" = "xyes" ] ; then
1450 $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
1451 autoheader_output
="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
1453 $VERBOSE_ECHO "$autoheader_output"
1454 if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
1455 fi # need_autoheader
1461 for feature
in AM_INIT_AUTOMAKE
; do
1462 $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
1463 found
="`grep \"^$feature.*\" $CONFIGURE`"
1464 if [ ! "x$found" = "x" ] ; then
1470 if [ "x$need_automake" = "xyes" ] ; then
1471 $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
1472 automake_output
="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
1474 $VERBOSE_ECHO "$automake_output"
1476 if [ ! $ret = 0 ] ; then
1482 $VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
1483 # retry without the -f
1484 automake_output
="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
1486 $VERBOSE_ECHO "$automake_output"
1488 if [ ! $ret = 0 ] ; then
1489 # test if libtool is busted
1490 libtool_failure
"$automake_output"
1492 # let the user know what went wrong
1496 $ECHO "ERROR: $AUTOMAKE failed"
1499 fi # automake ret = 0
1501 } # end of manual_autogen
1504 #####################################
1505 # RECURSIVE_MANUAL_AUTOGEN FUNCTION #
1506 #####################################
1507 recursive_manual_autogen
( ) {
1509 # run the build preparation steps manually for this directory
1512 # for projects using recursive configure, run the build
1513 # preparation steps for the subdirectories.
1514 if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
1515 $VERBOSE_ECHO "Recursively configuring the following directories:"
1516 $VERBOSE_ECHO " $CONFIG_SUBDIRS"
1517 for dir
in $CONFIG_SUBDIRS ; do
1518 $VERBOSE_ECHO "Processing recursive configure in $dir"
1522 # new directory, prepare
1525 # run manual steps for the subdir and any others below
1526 recursive_manual_autogen
1532 ################################
1533 # run manual preparation steps #
1534 ################################
1535 if [ "x$reconfigure_manually" = "xyes" ] ; then
1537 $ECHO $ECHO_N "Preparing build ... $ECHO_C"
1539 recursive_manual_autogen
1543 #########################
1544 # restore and summarize #
1545 #########################
1548 # restore COPYING and INSTALL from backup if necessary
1551 # make sure we end up with a configure script
1552 config_ac
="`locate_configure_template`"
1553 config
="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
1554 if [ "x$config" = "x" ] ; then
1555 $VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
1561 if test "x$config" = "x" -o ! -f "$config" ; then
1562 $ECHO "WARNING: The $PROJECT build system should now be prepared but there"
1563 $ECHO "does not seem to be a resulting configure file. This is unexpected"
1564 $ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
1565 $ECHO "with the --verbose option to get more details on a potential"
1566 $ECHO "misconfiguration."
1568 $ECHO "The $PROJECT build system is now prepared. To build here, run:"
1577 # sh-basic-offset: 4
1579 # indent-tabs-mode: t
1581 # ex: shiftwidth=4 tabstop=8