* coff-mips.c: Include libaout.h and aout/aout64.h to get

[binutils-gdb.git] / bfd / ChangeLog

Wed May 12 14:39:59 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c: Include libaout.h and aout/aout64.h to get
        definitions for N_SET[ATDB].
        (ecoff_howto_table): Moved near top of file.
        (ecoff_set_symbol_info): If a STABS symbol of type N_SET[ATDB] is
        seen, cook up a constructor section of the same name and put in a
        reloc pointing to the symbol.  This lets the GNU linker build
        global constructors and destructors without using collect.

Tue May 11 00:33:31 1993  John Gilmore  (gnu@cygnus.com)

        * coff-m88k.c (m88kbcs_vec):  Symbols have underbars.

Sun May  9 16:36:59 1993  Fred Fish  (fnf@cygnus.com)

        * configure.in (hppa*-*-bsd):  Change to hppa*-*-bsd*
        * configure.in (hppa*-*-hpux):  Change to hppa*-*-hpux*
        * configure.in (m68*-hp-bsd):  Change to m68*-hp-bsd*
        * configure.in (m68*-*-hpux):  Change to m68*-*-hpux*
        * configure.in (*-*-bsd):  Change to *-*-bsd*

Wed May  5 16:08:32 1993  Per Bothner  (bothner@cygnus.com)

        * elf32-hppa.c (elf_hppa_reloc_type_lookup):  Cast enums to
        int, for the sake of the old Portable C Compiler.

Mon May  3 14:37:01 1993  Stu Grossman  (grossman@cygnus.com)

        * Makefile.in (CFILES):  Add cpu-sh.c and coff-sh.c.

Mon May  3 14:03:21 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * configure.in: Get target name right for m68*-*-hpux.

Sun May  2 11:39:44 1993  Fred Fish  (fnf@cygnus.com)

        * trad-core.c (NO_SIGNED_GET):  New macro.
        * trad-core.c (trad_core_vec):  Use new NO_SIGNED_GET instead of
        signed NO_GET, where appropriate.

        * configure.in (i[34]86-*-linux*):  Add; bfd_target = i386-linux.
        * configure.in (*-*-linux*):  Remove until linux port for a
        non-i386/i486 system is actually available.

Fri Apr 30 20:04:10 1993  Stu Grossman  (grossman@cygnus.com)

        * libhppa.h:  #undef e_* symbols which come from <machine/som.h>
        when compiling under HPUX.

Fri Apr 30 17:25:23 1993  Stu Grossman  (grossman@cygnus.com)

        * The following patches are from Jeffrey Law <law@cs.utah.edu>.
        * hppa.c (hppa_core_file_p): Provide a temporary dummy routine
        for HOST_HPPABSD.
        * bfd/hosts/hppabsd.h: Fix declarations of malloc and free.
        * bfd/libhppa.h: Include sysdep here.  Conditionalize
        includes based on HOST_HPPAHPUX or HOST_HPPABSD.
        Provide definitions for MAXCOMLEN and _PA_RISC_ID suitable
        for BSD.

Fri Apr 30 17:34:11 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * elf32-hppa.c: Don't include a.out.h.  Apparently not even the
        GNU version is needed.

Fri Apr 30 09:38:59 1993  Jim Kingdon  (kingdon@cygnus.com)

        * coffcode.h: use dummy_reloc16_extra_cases rather than casting abort.

Thu Apr 29 11:30:32 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * Makefile.in: Build elf32-hppa.o.

        * syms.c (BSF_FUNCTION): New symbol flag.

        * elf32-hppa.c: Fixed to work with elf32-target.h.

        * hp300hpux.c (NAME, NAME_swap_exec_header_in): Fix for
        traditional C.
        * libaout.h (NAME): Don't define if already defined.

        * libelf.h: Protect against multiple inclusions.
        (elf_symbol_type): Moved here, added new fields.
        (struct elf_backend_data): New field `global_sym'; I suspect this
        may be misplaced.
        * elf32.c (elf_symbol_type): Deleted from here.
        (struct elf_obj_tdata): New fields raw_syms and internal_syms, to
        point to backend versions of symbols.
        (obj_symbols, obj_raw_syms, obj_internal_syms): New macros.
        (elf_swap_phdr_out, elf_build_phdrs, elf_write_phdrs): New
        functions.
        (elf_write_object_contents): Write program headers if appropriate.
        (bfd_section_from_shdr): Unnamed sections get empty string for
        name, not "unnamed".  Handle SHT_NOBITS separately from
        SHT_PROGBITS, and set some different flags.
        (elf_file_p): New routine.
        (elf_object_p, elf_core_file_p): Call it.
        (elf_object_p): Handle EM_HPPA.
        (elf_symbol_from, elf_idx_of_sym): New functions.
        (elf_make_sections): Get symbol number right for relocations.  Set
        SHF_ALLOC, SHF_WRITE, SHF_EXECINSTR when appropriate.
        (elf_fake_sections): BSS section should be SHT_NOBITS, not
        SHT_PROGBITS.  Always generate symtab and strtab, not only if
        relocations are needed.  Set SHF_* flags as appropriate.
        (elf_compute_section_file_positions): Handle bfd_arch_hppa.
        (elf_write_object_contents): Fix off-by-one error in symbol count.
        Store a correct value for the symbol; write the size field
        properly; make some guesses about the type field.  Set section
        type correctly for string tables.
        (section_from_elf_index): Check for absolute and common sections
        first.
        (elf_section_from_bfd_section): Ditto.
        (elf_slurp_symbol_table): Use elf_symbol_type instead of asymbol.
        Use empty string instead of "unnamed" for nameless symbols.
        Handle STTY_FUNC type, and weirdness with "$global$" symbol for
        HPPA (only?).  Don't free raw symbols; keep the pointer around for
        later.
        (elf_set_arch_mach): Handle bfd_arch_hppa.
        (elf_find_nearest_line): Just return false.
        (elf_write_object_contents, elf_set_section_contents): Set
        output_has_begun field after computing file positions.
        (elf_set_section_contents): Write section contents immediately,
        rather than caching the whole file and writing it at close time.

        * libhppa.h (enum hppa_reloc_field_selector_type, enum
        hppa_reloc_field_selector_typ_alt, enum hppa_reloc_expr_type, enum
        hppa_reloc_expr_type_alt): New enumerator types.

        * config/hppa-elf.mt,. config/hppaosf.mh: HP PA/OSF support.
        * configure.in, configure.host: Use them.

Wed Apr 28 23:21:01 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * elf32-target.h: Allow overrides of armap defaults.

        * elf32-hppa.c, elf32-hppa.h: New files.

        * config/hp300hpux.mt: New file.

Tue Apr 27 05:39:40 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

        * aix386-core.c (NO_GETS): New macro; NO_GET for signed values.
        (aix386_core_vec): Update for new fields.

        * archive.c (bfd_generic_archive_p): Call target-specific
        slurp_armap code, instead of bfd_slurp_armap.
        (bfd_slurp_bsd_armap_f2): New function.
        * libbfd-in.h (bfd_slurp_bsd_armap_f2): Declare it.
        * aout-target.h (AR_PAD_CHAR): Define it if not already defined.
        (vec): Use it.
        * libaout.h (struct aoutdata): New field for subformat, for
        differentiating between highly similar a.out formats.
        * aoutx.h (NAME_swap_exec_header_in): New macro, defaults to local
        version of function.
        (swap_exec_header_in): Don't define if NAME_swap_exec_header_in is
        already defined.
        * hp300hpux.c: New file.
        * Makefile.in: Include it.

Mon Apr 26 13:24:43 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * Makefile.in, archures.c, coffcode.h, targets.c: Support for
        Hitachi SH.

Mon Apr 26 13:55:42 1993  Jim Kingdon  (kingdon@cygnus.com)

        * trad-core.c (trad_unix_core_file_p): Check the file size.

Mon Apr 26 13:24:43 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-alpha.c: Remove duplicate function and add warnings.

Mon Apr 26 11:25:58 1993  Ian Lance Taylor  (ian@cygnus.com)

        * sco-core.c (sco_core_vec): Add initializers for new target
        fields.

Sat Apr 24 21:33:45 1993  Jim Kingdon  (kingdon@cygnus.com)

        * coffcode.h [_LIT]: Recognize .lit section.

Fri Apr 23 19:00:36 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-alpha.c, cpu-alpha.c, config/alphaosf.mt,
        config/alphaosf.mt, hosts/alphaosf.h:  New files.

Fri Apr 23 16:48:46 1993  Stu Grossman  (grossman@cygnus.com)

        * Merge in HPPA/BSD changes from Utah.
        * hppa.c:  Use this for both HPUX & BSD.
        * targets.c:  Enable hppa_vec for both HPUX & BSD.
        * config/hppabsd.mt:  TDEFINES => TDEFAULTS.
        * hosts/hppabsd.h:  #define HOST_HPPABSD.

Wed Apr 21 01:50:10 1993  John Gilmore  (gnu@cygnus.com)

        * libbfd.c:  Whitespace changes around byteswap macros.
        * libbfd-in.h:  Whitespace changes around byteswap declarations.

Tue Apr 20 15:59:07 1993  Stu Grossman  (grossman@cygnus.com)

        * aoutf1.h (sunos4_core_file_p):  Don't default bfd_error to
        system_error anymore.  It confuses bfd_check_format().

Mon Apr 19 23:03:08 1993  Stu Grossman  (grossman@cygnus.com)

        * bfd.c:  Add sgi_core_data to tdata union.
        * coff-mips.c:  Add Irix 4.x core file support.
        * hosts/irix4.h:  #define HOST_IRIX4.

Mon Apr 19 18:52:52 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * aoutx.h (translate_from_native_sym_flags): Check that the
        symbol's section does get set.
        (slurp_symbol_table): Zero index means null-string name.

        * aoutx.h (struct stringtab_entry, struct stringtab_data): New
        data structures.
        (hash, stringtab_init, add_to_stringtab, emit_strtab, compare):
        New functions.
        (write_syms): Use them, to reduce string table size.

Mon Apr 19 16:45:12 1993  Fred Fish  (fnf@cygnus.com)

        * trad-core.c (trad_core_vec):  Add 6 new initializers to match
          new signed get/put fields.  Minor reformatting to label
          some fields.

Mon Apr 19 06:09:41 1993  Jim Kingdon  (kingdon@cygnus.com)

        * bfd-in.h: Insert comment about SVR3 compiler warnings.

        * hosts/{hp300,i386isc,i386v}.h: Remove unused #defines of {r,}index
        (bfd uses strchr and the broken SVR3.2 cpp loses with the defines).

        * libbfd.c: bfd_put*: Remove casts to bfd_vma.

Fri Apr 16 17:49:27 1993  Jim Kingdon  (kingdon@cygnus.com)

        * aoutf1.h (internal_sunos_core): Make c_stacktop a bfd_vma.
        (swapcore_sparc): Make sp a bfd_vma.

Thu Apr 15 09:09:18 1993  Jim Kingdon  (kingdon@cygnus.com)

        * libbfd.c: Add signed versions of bfd_{h_,}{get,put}_signed_<size>.
        libbfd.c, libbfd-in.h: Add _do*signed*.
        targets.c, all targets: Add bfd*signed*.
        bfd-in.h: Add bfd_signed_vma.  Add comments.

        * bfd-in.h (bfd_error), bfd.c (bfd_errmsgs): Add file_truncated.

        * format.c (bfd_check_error): Check error return from
        _bfd_check_format routines.

Wed Apr 14 23:48:25 1993  Jim Kingdon  (kingdon@cygnus.com)

        * rs6000-core.c (rs6000coff_core_p): Improve error checking and
        recognize .data section if present. 

Thu Apr 15 01:00:29 1993  John Gilmore  (gnu@cygnus.com)

        * aoutx.h (aout_*_adjust_sizes_and_vmas):  Avoid `sanity'
        check for the case where the user sets the address of the BSS
        section (and the file header can't specify this).  Let the user
        set it wherever they want, regardless of what goes in the header.

        * ieee.c (ieee_slurp_sections):  Pass all ieee section names
        straight through into BFD sections.  Add comments.

Wed Apr 14 20:34:54 1993  John Gilmore  (gnu@cygnus.com)

        Cleanup in preparation for better 64-bit host support.

        * bfd-in.h (bfd_64_type):  Remove.
        * libbfd.c (_do_getb64, _do_putb64):  Use bfd_vma, not bfd_64_type.

        * bfd-in.h (bfd_size):  Remove.

        * bfd-in.h (bfd_offset):  Remove, after fixing ld/ldlang.[ch].

        * bfd-in.h (bfd_word):  Remove.
        * reloc.c (reloc_howto_type):  Replace bfd_word with bfd_vma.

        * bfd-in.h (rawdata_offset):  Remove.
        * reloc.c (arelent):  Replace rawdata_offset with bfd_size_type.
        (bfd_perform_relocation):  Lint.
        (enum bfd_reloc_status):  Comment cleanup.

        * aout-adobe.c, cpu-h8300.c, mipsbsd.c, srec.c: lint -Wall.

Tue Apr 13 11:19:52 1993  Jim Kingdon  (kingdon@cygnus.com)

        * aoutf1.h (swapcore_sparc): Guess the right value of USRSTACK.

Mon Apr 12 14:18:00 1993  John Gilmore  (gnu@cygnus.com)

        * elf32.c:  Clean up old comments.

Fri Apr  9 10:43:20 1993  Ian Lance Taylor  (ian@cygnus.com)

        * config/sun3.h: String argument to fprintf is const.

        * coff-mips.c: Renamed PAGE_SIZE to ROUND_SIZE, to avoid confusion
        on systems which define PAGE_SIZE in <limits.h>.

Thu Apr  8 10:28:00 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * trad-core.c (trad_unix_core_file_failing_signal): Use new macro
        TRAD_UNIX_CORE_FILE_FAILING_SIGNAL to allow host files to specify
        the core file failing signal.
        * hosts/decstation.h (TRAD_UNIX_CORE_FILE_FAILING_SIGNAL): Define
        to supply the core file failing signal.

Thu Apr  8 09:17:35 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (styp_to_sec_flags): Only set SEC_SHARED_LIBRARY for
        a STYP_NOLOAD | STYP_BSS section if BSS_NOLOAD_IS_SHARED_LIBRARY
        is defined.  On many COFF targets STYP_BSS is always STYP_NOLOAD.
        * coff-i386.h (BSS_NOLOAD_IS_SHARED_LIBRARY): Define.

Wed Apr  7 11:33:06 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (PAGESIZE): Correct value.

Tue Apr  6 12:05:44 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_find_nearest_line): Address of first PDR is
        an offset (patch from Jean-Daniel Fekete <jdf@lri.lri.fr>).

Mon Apr  5 12:07:12 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (styp_to_sec_flags): Set SEC_SHARED_LIBRARY for a
        STYP_NOLOAD | STYP_BSS section.  Don't set SEC_NEVER_LOAD for a
        STYP_INFO section.
        (coff_compute_section_file_positions): Force vma and lma of _LIB
        section to be zero.
        (coff_set_section_contents): Count number of entries in new lma
        field, not in vma.
        * coffgen.c (make_a_section_from_file): Force lineno_count of
        SEC_SHARED_LIBRARY section to be zero, since it is non-zero on the
        SCO 3.2v4 shared library.
        * seclet.c (rel): Copy over any section with contents, not just
        loadable sections.

        * coff-mips.c (ecoff_make_empty_symbol): Zero out newly allocated
        symbol.

        * coff-i386.c (coff_i386_reloc): New function, to generate
        relocateable output correctly.
        (howto_table): Use coff_i386_reloc for all reloc types.
        (CALC_ADDEND): Use a more efficient hack to get the correct addend
        for a common symbol.
        (i386comm_value): Removed; no longer needed.

Sun Apr  4 15:08:48 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coffcode.h (coff_set_section_contents): Don't write out
        sections without a filepos.

Fri Apr  2 14:35:05 1993  Ian Lance Taylor  (ian@cygnus.com)

        * seclet.c (seclet_dump_seclet): Correct SEC_HAS_CONTENTS test.

Wed Mar 31 17:41:05 1993  Ian Lance Taylor  (ian@cygnus.com)

        * reloc.c (bfd_reloc_code_real_type): Added BFD_RELOC_MIPS_GPREL.
        * libecoff.h (ecoff_data_type): Added gp_size field.
        * coff-mips.c (ecoff_mkobject_hook): Initialize gp_size to 8.
        (ecoff_set_symbol_info): Compare against gp_size, not hardcoded 8.
        Set flags to 0 for large common symbols.
        (ecoff_gprel_reloc): Handle non-zero addend for external symbols,
        which can occur for gas-generated relocs.
        (ecoff_bfd_reloc_type_lookup): Added BFD_RELOC_MIPS_GPREL case.
        * bfd.c (bfd_get_gp_size, bfd_set_gp_size): New functions.
        * Makefile.in (bfd.o): Now depends on coff/sym.h and libecoff.h.

Tue Mar 30 09:33:16 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * srec.c (srec_set_section_contents): Use lma field for load
        address.
        * section.c: Add declaration of lma field to section structure.
        * coffcode.h (coff_write_object_contents): Use lma field for load
        address.
        * bfd-in.h (bfd_set_section_vma): Set lma along with vma.       

        * aoutx.h (translate_from_native_sym_flags): Now handles indirect
        symbols in a better way. (translate_to_native_sym_flag): Set the
        N_INDR bit when necessary. (aout<>slurp_symbol_table): Maintain
        indirect state.
        * section.c: Added BFD_IND_SECTION_NAME and bfd_ind_section.
        (bfd_make_section): Cope with new builtin section.
        * syms.c (bfd_decode_symclass): Can now print indirect section
        info.

Wed Mar 24 13:36:33 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * aout-target.h (MY(object_p)):  Fail if MACHTYPE_OK is
        defined, and yields false.
        * aout-mipsbsd.c, i386bsd.c:  Define MACHTYPE_OK appropriately.

        * archive.c (snarf_ar_hdr):  Add support for reading (only,
        so far) BSD-4.4-style extended headers.
        * archive.c:  Some more comments.

Wed Mar 24 02:05:10 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

        * Makefile.in: fix rule for dvi and info, so that the recursive
        makes does the right thing, instead of always info

Wed Mar 24 02:56:44 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * libbfd.c (bfd_seek): Disable optimized handling for archives and
        archive members; they need more special reatment.  For now, verify
        that computed and actual file positions correspond.

Tue Mar 23 08:45:33 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * mipsbsd.c: Renamed from aout-mipsbsd.c.
        (set_arch_mach): Delete non-MIPS code.
        (reloc_howto_type_lookup): Ditto.
        * Makefile.in: Adjusted.

        * libbfd.c (bfd_tell): Update `where' field.
        (bfd_seek): Don't do anything if we're not changing the file
        position.  If FILE_OFFSET_IS_CHAR_INDEX is defined, check `where'
        field against a SEEK_SET request.  Call bfd_tell to re-update
        `where' field when done.
        (bfd_read, bfd_write) [FILE_OFFSET_IS_CHAR_INDEX]: Maintain
        `where' field.
        * hosts/sparc.h: Define FILE_OFFSET_IS_CHAR_INDEX.

Mon Mar 22 23:18:10 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: added installcheck target

Mon Mar 22 14:57:18 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_set_symbol_info): Relocate encapsulated stabs
        if the type is not stNil.

Tue Mar 16 10:35:27 1993  Ken Raeburn  (raeburn@cygnus.com)

        * elf32.c (elf_little_vec, elf_big_vec): Delete now-invalid
        forward declarations.

        * elf32-sparc.c (elf_sparc_howto_table): Don't use CONST here,
        it's implied by the type.

Fri Mar 12 18:58:08 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.host: recognize sparc-sun-solaris2* instead of sparc-sun-solaris*

Tue Mar  9 09:23:12 1993  Jim Kingdon  (kingdon@cygnus.com)

        * rs6000-core.c: Add .ldinfo section.

Fri Mar 12 11:57:52 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (MAKEOVERRIDES): Define to be empty.

Fri Mar 12 08:32:11 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * section.c (bfd_set_section_contents): whitespace
        * seclet.c (seclet_dump_seclet): Don't try and fill sections with
        no contents.

Thu Mar 11 19:26:15 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * hosts/go32.h: don't define POSIX_UTIME

Tue Mar  9 10:52:01 1993  Fred Fish  (fnf@cygnus.com)

        * elf32.c (elf_object_p):  Use ELF_ARCH stored in xvec to match
        against machine architecture stored in the ELF header, to resolve
        ambiguities.
        * elf32.c (bfd_section_from_shdr):  Bfd_make_section can return
        NULL, so only use results when non-NULL.
        * targets.c (elf32_m68k_vec, elf32_i860_vec):  Add extern decls
        and add to vector of targets.

Mon Mar  8 15:13:44 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_set_symbol_info): Encapsulated STABS symbols
        are always just debugging symbols.

        * coff-mips.c (ecoff_[gs]et_sym_index): Moved macros from here...
        libecoff.h (ecoff_[gs]et_sym_index): ...to here.

Mon Mar  8 14:55:13 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * hppa.c (_PA_RISC_ID): Defined if not already defined (e.g., for
        hpux 7).  Patch from friedman@gnu.ai.mit.edu.
        (hppa_object_p): Only check for DL_MAGIC and SHL_MAGIC if they're
        defined, which they aren't in hpux 7.0.

        * aix386-core.c: Include uinfo.h and coredump.h.  Patch from Minh
        Tran-Le, tranle@intellicorp.com.

Fri Mar  5 14:54:21 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_generic_reloc): If the addend is non-zero, go
        ahead and do the relocation.
        (ecoff_refhi_reloc): Don't to the relocation here, just remember
        what needs to be done.
        (ecoff_reflo_reloc): Do the REFHI relocation here.

Thu Mar  4 14:44:01 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_bfd_reloc_type_lookup): New function.
        (ecoff_write_object_contents): Added BFD_ASSERT calls to ensure
        relocs are reasonable.
        * coff-msym.c: Eliminated uses of DEFUN.
        (ecoff_swap_tir_out): New function.     

Tue Mar  2 17:52:58 1993  Fred Fish  (fnf@cygnus.com)

        (Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
        * configure.host (vax-*-ultrix2*):  Add triplet.
        * hosts/vaxult2.h:  New file.
        * config/vaxult2.mh:  New file.

        * aoutx.h (string.h):  Include for strchr and friends.
        * archive.c (string.h):  Include for memchr and friends.
        * elf32.c (string.h):  Include for strrchr and friends.

Sat Feb 27 00:44:24 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * aoutf1.c (sunos4_reloc_type_lookup): Unused; deleted.
        (MY_set_sizes): Use sunos4_set_sizes.

        * elf32.c: Renamed from elf.c.  Several CPU-specific functions
        deleted, as well as elf-big and elf-little targets.
        * libelf.h: New file.
        * elf32-sparc.c, elf32-i386.c, elf32-i860.c, elf32-m68k.c: New
        files, new targets.
        * Makefile.in, config/*-elf.mt, targets.c: Adjusted.

        * i386linux.c (TARGETNAME): Use hyphens instead of parentheses.

        * coffcode.h (coff_compute_section_file_positions): Don't need
        variable "old_sofar" if compiling for i960.

        * reloc.c (bfd_default_reloc_type_lookup): First argument is now a
        bfd pointer.
        * libbfd.h: Updated.

        * ieee.c (exten, envi): "static" belongs first in declaration.

Fri Feb 26 17:37:34 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * srec.c: add support for symbolsrec, srecords with symbols in
        them.

Thu Feb 25 11:43:30 1993  John Gilmore  (gnu@cacophony.cygnus.com)

        * ieee.c:  cast all arguments of ieee_write_byte to bfd_byte
        to avoid lint complaints.

Thu Feb 25 02:15:52 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * elf.c (elf_write_object_contents): Section ".shstrtab" should be
        type SHT_STRTAB.  Don't alter file offset for section 0.
        (reloc_type_names): Now an array instead of a macro.  Still inside
        "#if 0", since it's used only in debugging code also in "#if 0".
        (struct elf_reloc_map_elt, struct elf_reloc_map): New types.
        (sort_reloc_map): New function.
        (sparc_reloc_map): New variable.
        (elf_bfd_reloc_type_lookup): New function.

Tue Feb 23 12:17:16 1993  Ian Lance Taylor  (ian@cygnus.com)

        * bfd-in.h (JUMP_TABLE): Added bfd_reloc_type_lookup and
        bfd_make_debug_symbol; they were already in the target structure.
        * Adjusted all uses of JUMP_TABLE.
        * coffgen.c, libcoff-in.h (coff_bfd_make_debug_symbol): Renamed
        from coff_make_debug_symbol.
        * libcoff.h: Updated accordingly.

        * Minor cleanups provoked by gcc warnings:
        * aoutx.h (NAME(aout, reloc_type_lookup)),
        cpu-h8300.c (local_bfd_reloc_type_lookup),
        cpu-z8k.c (local_bfd_reloc_type_lookup): Added default case to
        switches.
        * archive.c (do_slurp_bsd_armap, do_slurp_coff_armap),
        ieee.c (ieee_slurp_section_data),
        elf.c (elf_make_sections, elf_fake_sections,
        elf_compute_section_file_positions, elf_write_object_contents):
        Removed unused variables.
        * archures.c: Removed /* from within comment.
        * bout.c (b_out_squirt_out_relocs): Initialize r_extern.
        * oasys.c (oasys_write_data): Initialize i.

Mon Feb 22 18:40:06 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * libcoff.h (obj_raw_syment_coun):  New macro.
        * coffgen.c (coff_get_normalized_symtab):  Initialize
        raw_syment_count.
        * coffgen.c (coff_find_nearest_line):  Numerous little fixes.

Mon Feb 22 15:03:07 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c (ecoff_set_symbol_info): stBlock symbols are always
        debugging symbols.
        (ecoff_get_debug): Offset the fdr adr by the adr of the first pdr,
        for compatibility with tools from MIPS.

        * config/bigmips.mt: New file; default vector is ecoff_big_vec.
        * config/irix3.mt, config/irix4.mt: Removed.
        * configure.in (mips-*-ecoff): New target; uses bigmips.mt.
        (mips-sgi-*, mips-big-*): Use bigmips rather than irix3.

Wed Feb 17 23:40:41 1993  John Gilmore  (gnu@cygnus.com)

        * hosts/hp300bsd.h:  Add gross hack to determine whether we
        are running on BSD 4.3 or BSD 4.4, and use appropriate include
        files (and set other parameters) to match.

Wed Feb 17 12:28:13 1993  K. Richard Pixley  (rich@cygnus.com)

        * trad-core.c (trad_unix_make_empty_symbol): wrap PARAMS around an
          ansi definition which otherwise confuses non-ansi compilers.

        * aout-adobe.c (aout_adobe_object_p): eliminate a warning from vax
          ultrix cc by forward declaring getenv as is done in
          bfd_find_target.

Tue Feb 16 17:56:58 1993  K. Richard Pixley  (rich@cygnus.com)

        * elf.c (elf_info_to_howto): cast an enum into unsigned char
          avoiding a fatal error in vax ultrix 4.2 cc.

Tue Feb 16 00:44:54 1993  John Gilmore  (gnu@cygnus.com)

        * bfd-in.h, VERSION:  Roll to version 2.1.

Mon Feb 15 20:43:51 1993  John Gilmore  (gnu@cygnus.com)

        * oasys.c (oasys_write_object_contents):  Lint.
        * srec.c:  Whitespace cleanup.

Fri Feb 12 14:23:07 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coffgen.c (coff_print_symbol): Print correct tagndx value;
        cleaned up output formatting a bit.

Fri Feb 12 08:28:56 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coffcode.h (coff_set_arch_mach_hook): *FIXME* the H8/300 is always
        relaxable.  Should be moved somewhere else.

Thu Feb 11 14:09:42 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * aout-mipsbsd.c: Eliminated uses of DEFUN.
        (aout_mips_*_vec): Added seclet_link element.

        * Makefile.in (BFD_BACKENDS, CFILES, aout-mipsbsd.o): Added
        support for aout-mipsbsd target.

        * bout.c (get_value): Don't truncate 32-bit addend to 16 bits.

Fri Feb  5 08:08:43 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * cpu-h8500.c (scan_mach): return false if it's not an H8/500

Thu Feb  4 12:52:40 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        Add support for the H8/500

        * coff-h8500.c, cpu-h8500.c, archures.c, coffcode.h, targets.c

Thu Feb  4 12:35:02 1993  Ian Lance Taylor  (ian@cygnus.com)

        * libecoff.h: New file.  Defines ECOFF backend data for gdb.
        * coff-mips.c: Now includes libecoff.h.
        (ecoff_data_type): Moved to libecoff.h.
        (ecoff_slurp_symbolic_info): Made globally visible so that gdb can
        call it.  If there is ever another ECOFF target, this and the
        swapping functions should be accessed via an ECOFF specific target
        vector.
        * Makefile.in (coff-mips.o): Depends on libecoff.h.

Wed Feb  3 09:14:36 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h: Removed MIPS specific information, since coff-mips.c
        no longer includes this file.

        * coff-msym.c (ecoff_swap_fdr_in, ecoff_swap_ext_in): Set reserved
        bits to 0 to make comparison test useful.

        * config/irix3.mh, config/irix4.mh (HDEFINES): Set to -G 4 to
        avoid overflowing GP accessible sections in binutils/objdump.

Tue Feb  2 15:36:55 1993  Per Bothner  (bothner@cygnus.com)

        * aoutx.h (NAME(aout,slurp_symbol_table)):  Made symbol
        reading more robust:  Fail if string index is out of string
        table range.

Tue Feb  2 11:43:25 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * bout.c (b_out_get_relocated_section_contents, cases PCREL24 and
        PCREL13): Don't take dst_address into account; the input file has
        already taken care of that.

Tue Feb  2 11:41:06 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coff-mips.c: Completed support for linker and binutils.

Mon Feb  1 14:45:38 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * bout.c (b_out_get_relocated_section_contents, case ABS32): Keep
        original addend from section contents.

Thu Jan 28 21:01:37 1993  John Gilmore  (gnu@cygnus.com)

        Fix minor bugs reported by Carl Greco, <cgreco@parrot.creighton.edu>:
        * hosts/delta88.h (strtol):  Fix prototype.
        * config/m88k-coff.mt (SELECT_ARCHITECTURES):  Fix name.

Wed Jan 27 17:16:51 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * elf.c: Get rid of "#ifdef sparc".
        (RELOC_TYPE_NAMES): Never used (currently), so don't include it.
        (elf_sparc_howto_table): Renamed from elf_howto_table, and always
        used.
        (elf_info_to_howto): Use runtime conditionals on CPU type, not
        compile type conditionals on host CPU.
        (elf_little_vec, elf_big_vec): Use bfd_default_reloc_type_lookup,
        not null pointer.
        (reloc_type, RELOC_TYPE_NAMES): Include i386 values.

Tue Jan 26 11:43:14 1993  Ian Lance Taylor  (ian@cygnus.com)

        * section.c (SEC_IS_COMMON): New section flag, needed for MIPS
        ECOFF which has two common sections.
        (bfd_com_section): Set SEC_IS_COMMON flag.
        * bfd-in.h (bfd_is_com_section): New macro to test SEC_IS_COMMON.
        * aoutx.h, archive.c, bout.c, coff-a29k.c, coff-m88k.c,
        coff-mips.c, coffgen.c, ieee.c, oasys.c, reloc.c, syms.: Use
        bfd_is_com_section macro rather than checking for equality to
        bfd_com_section.

Mon Jan 25 15:27:36 1993  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (_bfd_coff_mkobject_hook): Pass aouthdr argument.
        (coff_mkobject_hook): Accept aouthdr argument.
        * coffgen.c (coff_real_object_p): Pass aouthdr to mkobject_hook.
        Handle NULL aouthdr argument.
        (coff_object_p): If there is no aouthdr, pass it as NULL to
        coff_real_object_p.
        * libcoff.h: Rebuilt for mkobject_hook changes.

        * coffswap.h (coff_swap_aouthdr_in, coff_swap_aouthdr_in): Swap
        additional MIPS ECOFF fields.

Sat Jan 23 18:36:20 PST 1993  Ralph Campbell  (ralphc@pyramid.com)

        * configure.host: added mips-dec-bsd*
        * configure.in: added mips-dec-bsd*
        * aout-mipsbsd.c: new file for mips-dec-bsd*
        * aout-target.h: don't define '' if 'MY_BFD_TARGET' is defined.
        * aoutx.h: added mips support.
        * archures.c: added mips support to bfd_default_scan().
        * cpu-mips.c: added support for R4000 (untested).
        * libaout.h: added MIPS1 & MIPS2 magic numbers.
        * reloc.c: fix typo's in comments. Added BFD_RELOC entries which I
                hope will make it into include/bfd.h.
        * targets.c: added aout_mips_*_vec.

Wed Jan 20 17:15:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * config/decstation.mt: Set DEFAULT_VECTOR to ecoff_little_vec.

Tue Jan 19 09:06:14 1993  Ian Lance Taylor  (ian@cygnus.com)

        * bfd-in.h (bfd_asymbol_value): Add needed parentheses.

        * libcoff-in.h: Update prototype for coff_count_linenumbers.

Fri Jan 15 18:13:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * coff-msym.c (ecoff_swap_hdr_out, ecoff_swap_fdr_out,
        ecoff_swap_pdr_out, ecoff_swap_sym_out, ecoff_swap_ext_out,
        ecoff_swap_rndx_out, ecoff_swap_rfd_out, ecoff_swap_opt_in,
        ecoff_swap_opt_out, ecoff_swap_dnr_in, ecoff_swap_dnr_out): New
        functions.
        * coffswap.h: If NO_COFF_RELOCS is defined, don't define
        bfd_swap_reloc_in or coff_swap_reloc_out.
        * coff-mips.c: Added code to link and write out symbolic debugging
        information, and to swap relocs in and out.

Thu Jan 14 15:51:58 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * libcoff.h, coffgen.c (coff_count_linenumbers), coffcode.h
        (coff_write_object_contents): coff_count_linenumbers returns the
        number of line number records it found.

        * coffgen.c (coff_write_linenumbers): only write out line numbers
        in the section they belong to.

Mon Jan 11 18:32:22 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * targets.c (bfd_target): Added relocateable argument to
        _bfd_get_relocated_section_contents.  Added _bfd_seclet_link
        target vector for linker use.
        * bfd.c (bfd_seclet_link): New macro.
        * bfd-in.h (JUMP_TABLE): Added _bfd_seclet_link.
        * seclet.c (rel, seclet_dump_seclet): Added relocateable argument
        and boolean return value.  Made static.
        (bfd_generic_seclet_link): Renamed from seclet_dump.  Added
        relocateable argument.
        * reloc.c (bfd_generic_get_relocated_section_contents): Added
        relocateable argument (if relocateable, saves relocs).
        * bout.c (b_out_get_relocated_section_contents),
        reloc16.c (bfd_coff_reloc16_get_relocated_section_contents): Added
        relocateable argument (if relocateable, just calls
        bfd_generic_get_relocated_section_contents).
        * libcoff-in.h (bfd_coff_reloc16_get_value): Added relocateable
        argument to prototype.
        * All targets: Set new _bfd_seclet_link vector to
        bfd_generic_seclet_link.

Sat Jan  9 21:29:32 1993  Stu Grossman  (grossman at cygnus.com)

        * coffgen.c:  #include seclet.h.

Sat Jan  9 19:48:14 1993  Stu Grossman  (grossman at cygnus.com)

        * hppa.c (hppa_object_setup):  Get rid of all knowledge of stabs
        debug info.  Setup info about linker symbols only, and use
        standard bfd fields to hold the info.
        * (hppa_object_p):  Remove unneeded decls.
        * (hppa_new_section_hook):  Get rid of most of this.
        * libhppa.h (struct hppadata):  Remove ten pounds of useless ugly
        fat.  Remove all knowledge of stabs, remove redundant knowledge of
        linker symbols.
        * Remove macros for accessing fields which are now gone.

Fri Jan  8 15:20:00 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coffcode.h (sec_to_styp_flags): allow SEC_NEVER_LOAD to turn on
        STYP_NOLOAD bit.
        * coff-z8k.c: delete unused reloc functions

Fri Jan  8 15:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * bfd.c (struct _bfd): Added ecoff_tdata to tdata union.
        * targets.c (enum target_flavour): Added bfd_target_ecoff_flavour.
        * coff-msym.c: Use DEFUN for function definitons.
        * coff-mips.c: Added code to read and print symbols, and to find
        line numbers.

        * coffcode.h: Moved many generic functions into coffgen.c.  Moved
        swapping functions into coffswap.h for ECOFF use.  Moved
        relocation functions, only used by h8300 and z8k, into reloc16.c.
        Added hooks for coffgen.c functions to backend data structure, and
        added hook functions.  Still more could be done.
        * coffswap.h: New file to hold COFF swapping routines.
        * coffgen.c: New file to hold generic COFF functions.
        * reloc16.c: New file to hold h8300 and z8k specific relocation
        functions.
        * libcoff-in.h: Added declarations for functions in coffgen.c.
        * libcoff.h: Rebuilt to incorporate changes.
        * coff-h8300.c: Function name changes.
        * coff-z8k.c: Function name changes.  Use coff_reloc16_extra_cases
        hook rather than defining EXTRA_CASES.
        * Makefile.in: Build new files coffgen and reloc16.  Added
        dependencies of coff-*.o on coffswap.h and seclet.h.

Thu Jan  7 16:16:26 1993  Per Bothner  (bothner@cygnus.com)

        * ieee.c (ieee_slurp_sections):  Add cast to avoid warning
        about discarding const.

Wed Jan  6 00:16:49 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * archive.c, seclet.c, elf.c use bfd_xmalloc instead of malloc

Tue Jan  5 09:35:57 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * configure.in (post-target): If --with-minimal-bfd is specified,
        set MINIMIZE=1.

Mon Jan  4 07:20:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * srec.c (srec_write_records): one of my boards wants a CR between
        records.

Wed Dec 30 12:46:30 1992  Ian Lance Taylor  (ian@cygnus.com)

        * archive.c (do_slurp_coff_armap): set symdef_count correctly
        (it broke a couple of weeks ago).

Tue Dec 29 21:41:05 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * elf.c (bfd_elf_find_section): Switch back to "struct ..." for
        return type, so libbfd.h doesn't reference undefined typedefnames.

Tue Dec 29 13:54:35 1992  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (coff_real_object_p): use name I386AIXMAGIC rather
        than I386SVMAGIC.
        (coff_pointerize_aux): don't pointerize a negative tagndx
        (sometimes generated by SCO 3.2v4 cc).

        * bout.c (calljx_callback, callj_callback,
        b_out_get_relocated_section_contents): warn if relocating against
        an undefined symbol.

Mon Dec 28 14:30:55 1992  Stu Grossman  (grossman at cygnus.com)

        * hppa.c:  Get rid of DEFUN, use more conventional prolog stuff.
        Make a bunch more routines be static.
        * hppa.c (fill_spaces):  Get rid of this, replace with much better
        written setup_sections().
        * (setup_sections):  New routine to create BFD sections for each
        space and subspace in SOM files.
        * (hppa_object_setup):  Use BFD sections created by
        setup_sections() to locate GDB symbol table info.
        * (make_unique_section):  New routine to create a BFD section.  It
        ensures that the given name is unique, and will generate a unique
        one if necessary.
        * (hppa_object_p):  Become much more paranoid about file header.
        * (make_bfd_asection):  Call bfd_make_section to do the dirty
        work.  Simplify code somewhat.
        * (hppa_core_file_p):  Use proper name for stack section.
        * libhppa.h:  Remove millicode_start, millicode_end decls.

Mon Dec 28 11:03:22 1992  Ken Raeburn  (raeburn@cygnus.com)

        * Makefile.in (coff-we32k.o, coff-z8k.o): Note dependencies.

        * reloc.c (bfd_perform_relocation): For normal 2- or 4-byte
        relocs, don't bother doing the adjustment if the value to add is
        zero.

Sun Dec 27 17:45:05 1992  Fred Fish  (fnf@cygnus.com)

        * bfd.c (bfd_get_size):  New function that gets an upper bound
        on the possible size of any object in a bfd.
        * elf.c (bfd_elf_find_section, elf_get_str_section,
        elf_get_symtab_upper_bound):  Rewrite to avoid NULL pointer
        dereferences.
        * elf.c (elf_big_vec, elf_little_vec):  Document last three
        members initialized to NULL.

Thu Dec 24 17:49:09 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * hppa.c: change a 'const' to 'CONST', or else HP C compiler dies

Mon Dec 21 16:33:34 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * hosts/std-host.h:  New file.  Attempt at a generic/default
        set of definitions, to discourage porting to new hosts by copying.
        * hosts/news.h:  Removed.
        * hosts/sparc.h:  Use std-host.h.
        * bfd-in.h:  New macros bfd_asymbol_bfd and bfd_asymbol_flavour;
        perhaps we can later remove the the_bfd field from each symbol.
        * syms.c (struct symbol_cache_entry):  Remove unused field
        app_data.  Add comment noting that the_bfd is almost redundant,
        but not quite.
        * aoutx.h, coff-a29k.c, coff-i386.c, coff-i960.c, coffcode.h:
        Use new macros bfd_asymbol_bfd and bfd_asymbol_flavour.
        * hppa.c (fill_spaces):  Make slightly more rebust.
        * configure.in:  Allow std-host as the "default" host.

Mon Dec 21 17:24:13 1992  Stu Grossman  (grossman at cygnus.com)

        * bfd.c:  Add struct hppa_core_data to tdata union.
        * hppa.c:  Conditionalize on HOST_HPPAHPUX instead of hp9000s800.
        Get rid of HPPA/BSD specific code.  That will go somewhere else
        someday.
        * (fill_spaces):  Don't spin forever and die if you don't find
        $MILLICODE$ subspace.
        * (hppa_object_p):  Make sure that we have a real honest-to-cthulu
        exec file!
        * (hppa_core_file_failing_signal, hppa_core_file_failing_command):
        Make these work for HPUX.
        * (make_bfd_asection):  New routine to make section creation a
        little easier.
        * (hppa_core_file_p):  Completely rewrite, leave out bugs.
        * libhppa.h:  #include the right system files.  Redefine all of
        the structs/macros for hacking core files to use more sensible
        HPUX core file structures.
        * targets.c (target_vector):  Conditionalize hppa_vec on
        HOST_HPPAHPUX, not hp9000s800.
        * hosts/hppahpux.h:  #include stdlib.h to get correct decls for
        malloc and realloc.  #define HOST_HPPAHPUX.

Mon Dec 21 12:40:10 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Patches from Minh Tran-le <mtranle@paris.intellicorp.com>.
        * configure.in (i386-*-isc*, i386-*-aix*): New targets.
        * configure.host (i386-*-isc*, i386-*-aix*): New hosts.
        * hosts/i386isc.h, config/i386isc.mh: New files for Interactive
        Unix.
        * hosts/i386aix.h, config/i386aix.mh: New files for AIX on PS/2.
        * aix386-core.c: New file for handling core files on AIX on PS/2.
        * targets.c: if AIX386_CORE, use aix386_core_vec.
        * coffcode.h (coff_real_object_p): check for I386SVMAGIC as well
        as I386MAGIC.

Fri Dec 18 10:20:27 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * aoutf1.h (sunos4_write_object_contents): set flags to 0, fixing
        1927.
            
Thu Dec 17 19:35:32 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: added dvi target

Thu Dec 17 00:36:24 1992  John Gilmore  (gnu@cygnus.com)

        * bfd.c:  Use right name for tekhex tdata struct.
        * tekhex.c:  Insert leading_char (0) into bfd_target struct.  Style.
        * libcoff.h:  Updated to get spacing change from coffcode.h.
        * trad-core.c:  leading_char is 0 (no symbols!), not '_'.

Tue Dec 15 15:40:30 1992  Per Bothner  (bothner@cygnus.com)

        * archive.c (do_slurp_bsd_armap, do_slurp_coff_armap):  New
        functions, with the "guts" of the old bfd_slurp_bsd_armap
        and bfd_slurp_coff_armap, but assuming we've already checked
        if the armap is present or not.
        Also, rewrite a bit to avoid keeping around obstack data
        that we don't need.
        * archive.c (snarf_ar_header, _bfd_slurp_extended_name_table):
        Various fixes to correctly handle COFF_style archives names.
        (Note that because these have a trailing '/', the names can
        have embedded spaces.)
        * archive.c (bfd_slurp_armap):  New function, replaces old
        bfd_slurp_bsd_armap and bfd_slurp_coff_armap.  Recognizes
        _either_ format, and calls do_slurp_bsd_armap or
        do_slurp_coff_armap if either form of map is seen.
        * libbfd-in.h:  Changed bfd_slurp_bsd_armap and
        bfd_slurp_coff_armap into macro synonyms for bfd_slurp_armap.
        * elf.c (elf_slurp_armap, elf_write_armap):  Fix.
        * Makefile.in (AR_FLAGS):  Use rc instead of non-standard qc.

Mon Dec 14 17:08:08 1992  Stu Grossman  (grossman at cygnus.com)

        * hppa.c:  #include "sysdep.h", not <sysdep.h>.
        * libhppa.h:  Make millicode_start and millicode_end be unsigned
        int to be same type as CORE_ADDR in GDB.  Why are these here?

Sat Dec 12 15:54:36 1992  Ian Lance Taylor  (ian@cygnus.com)

        * coff-i386.c (CALC_ADDEND): if reloc is PC relative, add the
        vaddr of the section to the addend.
        * targets.c: if MINIMIZE is 1, and SCO_CORE is defined, add
        SCO_CORE to SELECT_VECS.
        (target_vector): add sco_core_vec.
        * sco-core.c (sco_core_vec): add leading underscore initializer.
        * configure.in (i[34]86-*-sco*): use target i386-sco.
        * config/i386-sco.mt: new file; define SCO_CORE.

Thu Dec 10 02:13:15 1992  John Gilmore  (gnu@cygnus.com)

        * aout-adobe.c (aout_adobe_object_p):  Fix !strcmp thinko.

Fri Dec  4 14:02:49 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * coffcode.h (bfd_coff_std_swap_table): Now static and const.

Thu Dec  3 16:54:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * hosts/i386linux.h: Include unistd.h.

        * aoutx.h (print_symbol): aout_stab_name returns a constant
        string.
        * libaout.h (aout_stab_name): Fix prototype.
        * stab-syms.c (aout_stab_names): Array is now const.
        (aout_stab_name): Return value is now pointer to const.

        * aoutx.h, archive.c, archures.c, coffcode.h, ctor.c, reloc.c,
        syms.c: Doc fixes.

        * syms.c (asymbol): Added new field "app_data", for data
        particular to the application.  Some of the linker flags ought to
        get moved to this field someday.

        * archures.c (bfd_default_scan): Recognize a few more numbers:
        80486, 80960, and 960.

        * bfd-in.h (COFF_SWAP_TABLE): New is just address of
        bfd_coff_std_swap_table, cast to PTR.
        * bfd.c (bfd_coff_swap_*): Deleted macros.
        * targets.c (struct bfd_target): Deleted COFF-specific swapping
        routine pointers.
        * coffcode.h (type bfd_coff_backend_data): New structure type,
        contains pointers to the COFF-specific swapping routines.
        (bfd_coff_std_swap_table): New data structure, to be used when
        NO_COFF_SYMBOLS and NO_COFF_LINENOS are not defined.
        (bfd_coff_swap_*): New macros.
        * coff-mips.c (mips_coff_swap_table): New data structure.
        (ecoff_big_vec): Use it.
        * All COFF targets: Moved COFF_SWAP_TABLE to target-specific data.
        * All other targets: Deleted coff-specific vector entries.

        * trad-core.c: Fixed some `PARAMS' uses that were missing
        parentheses.

Sun Nov 29 08:37:13 1992  Fred Fish  (fnf@cygnus.com)

        * aoutx.h (some_aout_object_p):  Protect arg prototype in
        callback_to_real_object_p with PARAMS macro for non-ANSI compilers.

Sat Nov 28 04:01:21 1992  John Gilmore  (gnu@cygnus.com)

        * aout-target.h, aoutf1.h, trad-core.c, coffcode.h, libaout.h,
        libbfd-in.h, bfd-in.h: Eliminate all PROTO calls, replace with
        PARAMS for readability.

        * aoutx.h:  Add type to callback parameter.
        * coff-mips.c:  Don't call trad-core.h, not needed.
        * trad-core.c:  Incorporate trad-core.h declarations.  Fix comments.
        * trad-core.h:  Eliminate, unused.

Wed Nov 18 13:16:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * format.c (bfd_check_format): if default target isn't found
        then look through the entire list rather than return early.

Mon Nov 16 14:33:03 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config/i960-coff.mt: reorder vec to match bfd_check_format (from Per)

Thu Nov 12 17:01:41 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: pass down prefix and exec_prefix in FLAGS_TO_PASS

Thu Nov 12 09:46:47 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-z8k.c: checkpoint, more addressing modes handled
        * coffcode.h (get_value): don't truncate reloc->addend field, it's
        a long now.

Wed Nov 11 23:57:55 1992  Brendan Kehoe  (brendan@cygnus.com)

        * we32k.mt (TDEFAULTS): Use we32kcoff_vec, not i386coff_vec.

Tue Nov 10 14:04:38 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: minor tweaks to make $(CC) command lines more consistent

Mon Nov  9 23:58:17 1992  John Gilmore  (gnu@cygnus.com)

        * opncls.c (bfd_fdopenr, bfd_close):  Add doc about cacheing
        and about when file descriptors are closed.

Sat Nov  7 00:42:20 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * bout.c (b_out_squirt_out_relocs): Make sure alignment relocs get
        written out correctly.

Thu Nov  5 15:34:19 1992  Ian Lance Taylor  (ian@cygnus.com)

        * section.c: New section bit SEC_SHARED_LIBRARY.
        coffcode.h (styp_to_sec_flags): if STYP_NOLOAD && (STYP_TEXT ||
        STYP_DATA), set SEC_SHARED_LIBRARY.  This seems to be correct for
        i386-sysv.

Thu Nov  5 04:43:09 1992  John Gilmore  (gnu@cygnus.com)

        * target.c (struct bfd_target):  Eliminate the SDEF and SDEF_FMT
        macros; use PARAMS to declare the function pointers involved.

        * bfd-in.h, bfd.c, libbfd.h, reloc.c, seclet.h, section.c,
        targets.c: Rename struct bfd_seclet_struct to struct bfd_seclet.

Thu Nov  5 02:59:09 1992  John Gilmore  (gnu@cygnus.com)

        Cleanup:  Replace all uses of EXFUN in the BFD sources, with PARAMS.

        * archures.c, reloc.c, section.c, tekhex.c:  Use PARAMS in
        declaring pointers to functions.
        * cache.c, elf.c:  Move static function decls to top, use PARAMS.
        * seclet.h:  Declare external function with PARAMS.

        * doc/chew.c (exfunstuff):  Eliminate.
        (paramstuff):  Replace exfunstuff with function to generate PARAMS.
        * doc/proto.str:  Use paramstuff rather than exfunstuff.

        * libbfd.h:  Update, based on changes in source code and chew.

Wed Nov  4 22:47:29 1992  John Gilmore  (gnu@cygnus.com)

        * libieee.h:  Add FIXME about removing limit on number of sections.
        * bfd-in.h:  Improve comments to make it clear that bfd.h is
        the wrong place to edit this file.
        * Makefile.in (install):  Install ansidecl.h and obstack.h in the
        same places where we install bfd.h.

Wed Nov  4 13:40:23 1992  Sean Eric Fagan  (sef@cygnus.com)

        * coffcode.h (coff_swap_aux_out, coff_swap_aux_in):  check for
        symbol type before blindly modifying the auxent.  Specifically,
        only modify the endndx fields for types that need it, and don't
        set the array information for non-arrays.

Wed Nov  4 09:30:50 1992  Ken Raeburn  (raeburn@cygnus.com)

        * aoutx.h (some_aout_object_p): Section list should be set up
        correctly anyways; don't have to set up "next" pointers manually.

Mon Nov  2 12:36:14 1992  Ian Lance Taylor  (ian@cygnus.com)

        * config/delta88.mh, config/hp300.mh, config/hppahpux.mh,
        config/i386v.mh: removed -DUSG from HDEFINES.
        hosts/delta88.h, hosts/hp300.h, hosts/hppahpux.h, hosts/i386v.h:
        defined USE_UTIME.
        hosts/i386v.h: don't define POSIX_UTIME.

Fri Oct 30 16:13:52 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * ieee.c (ieee_slurp_sections): make a private copy of the
        section's name before truncating it.

Thu Oct 29 08:30:50 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * hppa.c: add symbol_leading_char entry in transfer vec

,Wed Oct 28 16:11:57 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * ieee.c (get_symbol): can now cope when two symbols of a
        different class, but the same index number occur consecutively.
        (get_section_entry): nicer name for sections being forward
        referenced. (ieee_archive_p): don't free the filename string,
        since it was never malloced.

Wed Oct 28 13:42:09 1992  John Gilmore  (gnu@cygnus.com)

        * coffcode.h (coff_write_object_contents):  Zero timestamp field.

Tue Oct 27 12:24:34 1992  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (coff_swap_aux_out): set the fcnary info before
        optionally setting the dimen info, since they are in the same
        memory locations.  Also zero out external auxent.
        (coff_write_symbol): don't zero external auxent; now done in
        coff_swap_aux_out.

Fri Oct 23 13:55:35 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Check fclose return value for errors.
        libbfd.h: bfd_cache_close now returns a boolean.
        cache.c (bfd_cache_delete): return fclose success value.
        (bfd_cache_close): return bfd_cache_delete return value.
        opncls.c (bfd_close, bfd_close_all_done): return result of
        bfd_cache_close.

Fri Oct 23 10:32:36 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * seclet.c (rel): don't load sections without the SEC_LOAD bit.

Thu Oct 15 10:16:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-m68k.c (m68k_howto2type, SELECT_RELOC): new function to
        work out a coff relocation type from a howto's attributes rather
        than using the input r_type field. This fixes PR1677 and allows 
        conversion of a.out relocs to coff relocs.

        * coffcode.h (coff_write_relocs): if supplied a relocation
        relative to an absolute symbol, use the right symbol index.

        * reloc.c (bfd_perform_relocation): do a partial link for coff
        relocs right.

Fri Oct 23 08:15:56 1992  Ian Lance Taylor  (ian@cygnus.com)

        * changes to support i386-sysv with shared libraries:
        * coffcode.h (sec_to_styp_flags): if TWO_DATA_SECS is defined,
        check for .data2; if _LIB is defined, check for it; map
        SEC_NEVER_LOAD to STYP_NOLOAD.
        (styp_to_sec_flags): map STYP_NOLOAD to SEC_NEVER_LOAD.
        (make_a_section_from_file): if TWO_DATA_SECS, accept .data2.
        (coff_write_object_contents): force vaddr of .lib to 0; set scnptr
        if section has contents, not just if it is loadable; if
        TWO_DATA_SECS, check for .data2
        (coff_set_section_contents): set vma of .lib section to number of
        .lib sections.
        * coff-i386.c: define TWO_DATA_SECS; use a special CALC_ADDEND;
        don't define coff_write_armap to bsd_write_armap.
        * hosts/i386v.h: don't include <utime.h>, since it is not provided
        by SVR3.2.

Thu Oct 22 22:40:20 1992  Brendan Kehoe  (brendan@lisa.cygnus.com)

        * solaris2.h: Get the definition of alloca from alloca.h if we
        aren't using gcc.

Thu Oct 22 03:07:28 1992  John Gilmore  (gnu@cygnus.com)

        * configure.in (i960-*-{aout,bout}):  Support these.

Wed Oct 21 03:46:34 1992  John Gilmore  (gnu@cygnus.com)

        * config/a29k-aout.mt (DEFAULT_TARGET):  Set to one that exists.

Thu Oct 15 15:05:39 1992  Per Bothner  (bothner@cygnus.com)

        * apollo68.h, apollov68.h, hp300.h, i386v.h, irix3.h: Remove
        no-longer-used definitions of L_SET and L_INCR.
        * i386linux.h:  Tweaks to smooth Linux build.

Thu Oct 15 01:32:22 1992  John Gilmore  (gnu@cygnus.com)

        * seclet.h:  Add enum tag to bfd_seclet_enum_type.

        * bfd-in.h (file_ptr):  Update comments, make FIXME re off_t.

        * aout-adobe.c, aoutf1.h, archive.c, bout.c, coff-rs6000.c,
        coffcode.h, elf.c, ieee.c, libaout.h, libbfd.c, oasys.c,
        sco-core.c:  Lint:  Second argument of bfd_seek is always file_ptr.
        Third argument is SEEK_SET or SEEK_CUR.  Result is always 0 or -1.

        * aout-adobe.c, aoutf1.h, aoutx.h, bout.c coff-m68k.c, coff-z8k.c,
        coffcode.h, elf.c, libaout.h, libbfd-in.h, srec.c:  Lint.

Fri Oct  9 03:46:37 1992  John Gilmore  (gnu@cygnus.com)

        * configure.host:  New file, contains mapping of host configs
        to host support file names for bfd, binutils, opcodes.
        * configure.in:  Use it.
        * i386aout.c:  Cleanup, dump TARGET_IS_LITTLE_ENDIAN_P.
        * i386bsd.c:  Cleanup, reformat.
        * config/i386-bsd.mt:  Comment changes.
        * config/i386bsd.mh:  New file for core file support.
        * hosts/i386bsd.h:  Merge changes from Peter Schauer.
        * bout.c (ALIGN):  Rename to ALIGNER, since system header files
        on BSD 4.4 define ALIGN (sigh!).

Thu Oct  8 22:18:10 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)

        * libaout.h (aout_backend_data): added exec_header_not_counted
        field. For ZMAGIC files only, when text_includes_header is set, by
        default the length of the exec header is counted in the text
        section size. For go32, exec header is mapped in but does *not*
        contribute to the size of section.
        * aoutx.h (aout_adjust_sizes_and_vmas): if exec_header_not_counted
        is not set, but ztih is, add the size of the exec header to the
        recorded size of the text section.
        * aoutf1.h (sunos4_aout_backend): clear exec_header_not_counted.
        * i386aout.c (i386aout_backend_data): set exec_header_not_counted.
        Also set text_includes_header.
        * aout-target.h (*_backend_data): cleare exec_header_not_counted
        by default in MY(backend_data).

Thu Oct  8 18:12:49 1992  Ken Raeburn  (raeburn@cygnus.com)

        * aout-target.h (callback): Don't define this function if it won't be
        used.

        * aoutx.h (some_aout_object_p): Restore old aout_data value if this
        type doesn't match.  Don't lose if file sections have already been
        created.
        (set_arch_mach): Set reloc_entry_size.
        (slurp_symbol_table): Use bfd_h_get_{16,8} for reaeding symbol data.

        * hosts/i386bsd.h: New file.
        * configure.in: Recognize i[34]86-*-bsd host.

        * aout-target.h (callback, write_object_contents): Delete unused
        variables.

        * aoutx.h (reloc_type_lookup): New function.
        * aout-target.h (MY_reloc_howto_type_lookup): Use it as default.
        * aoutf1.h (sunos4_reloc_type_lookup): Deleted.
        (MY_reloc_howto_type_lookup): Don't define it.

        * aoutx.h (adjust_sizes_and_vmas): Don't bother with padding for
        OMAGIC files.
        (slurp_symbol_table): Use header byte order, not target byte
        order, for reading symbol data.

Thu Oct  8 17:33:39 1992  John Gilmore  (gnu@cygnus.com)

        * configure.in:  Undo some brain damage in the host section.
        * configure.in:  Reformat the target section, test many configs.
        * Makefile.in (make):  Remove obsolete `make make'.
        * aoutx.h (some_aout_object_p):  Make defines line up.

Thu Oct  8 08:52:48 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        Now a bfd knows whether underscores are normally prepended
        to symbols in its file format.

        * aout-adobe.c, aout-target.h, bout.c, coff-a29k.c, coff-h8300.c,
        coff-z8k.c: targets set so they have leading underscore
        * coff-i386.c, coff-i960.c, coff-m68k.c, coff-mips.c, coff-m88k.c,
        coff-rs6000.c, coff-we32k.c, elf.c, ieee.c, srec.c: targets set 
        without leading underscore flag
        * targets.c: add symbol leading char to xvec description
        * bfd-in.h (bfd_get_symbol_leading_char): new macro.

Mon Oct  5 14:32:55 1992  Per Bothner  (bothner@cygnus.com)

        * archive.c:  Make errno global.
        * archive.c (_bfd_write_archive_contents):  If read fails (and
        errno!=0) set bfd_error to malformed_archive (since this probably
        indicates a truncated archive), rather than system_call_error.

Mon Oct  5 03:33:39 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)

        * Makefile.in: added rules for i386bsd.c
        * i386bsd.c: new file, supporting 386bsd.
        * configure.in: recognize i386-*-bsd target.
        * config/i386-bsd.mt: new file - 386bsd target configuration.

Thu Oct  1 17:51:07 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: re-arrange host section to use *-*-* notation,
        clean up some of the target section as well

        * seclet.c: cast result of bfd_get_relocated_section_contents to
        avoid compiler warnings

Tue Sep 29 13:24:09 1992  Ken Raeburn  (raeburn@cygnus.com)

        * coffcode.h (coff_section_symbol): Create section if it doesn't
        already exist.

        * bout.c: Removed some unused variables.

Tue Sep 29 08:30:21 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Portability fixes from p3:
        coffcode.h (coff_write_relocs): removed sanity check until it
        works on all targets (per advice from sac).
        config/hp9000.mh: new file to define USG.
        hppa.c: #undef hppa before the JUMP_TABLE.
        hosts/hppahpux.h: #define NATIVE_HPPAHPUX_COMPILER if not
        __STDC__.
        targets.c (bfd_target_list): if NATIVE_HPPAHPUX_COMPILER, make
        local variable target volatile to avoid mysterious bug in
        HP9000/700 cc.

Sat Sep 26 03:58:49 1992  John Gilmore  (gnu@cygnus.com)

        * config/hppabsd.mh, config.hppahpux.mh:  Remove various bogosity.
        * hosts/hppahpux.h:  Remove bcopy and index circumventions.

Fri Sep 25 22:36:52 1992  John Gilmore  (gnu@cygnus.com)

        * coff-z8k.c (func_da, func_jr):  Lint.
        * coffcode.h:  Use memset rather than bzero.
        * elf.c:  Use memcpy rather than bcopy.
        * tekhex.c:  Use memset rather than bzero.

Fri Sep 25 19:14:48 1992  John Gilmore  (gnu@cygnus.com)

        Add Adobe a.out support.

        * aout-adobe.c:  New file.  So far, only reads a.out.adobe.  FIXME.
        * config/adobe.mt:  Add.
        * configure.in (*-adobe-* target):  Add.
        * targets.c (a_out_adobe_vec):  Add.
        * Makefile.in:  add aout-adobe.c.

        * configure.in:  Put two dashes in all entries to be matched.
        Add comments to remind people to do this.
        Reorder all entries that match manufacturer names, to occur
        last, so they will only be matched if no more specific match
        occurs.  Remove manufacturers `aout', `bout', `coff', and `elf'.

Fri Sep 25 15:03:22 1992  Brendan Kehoe  (brendan@rtl.cygnus.com)

        * elf.c (section_from_elf_index): Return bfd_abs_section, not 0,
        since we should never have a NULL section.
        (elf_slurp_symbol_table): If st_shndx doesn't match any of our
        tests, set the section to bfd_abs_section.

Fri Sep 25 11:11:57 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-z8k.c: getting closer
        * coffcode.h (coff_get_relocated_section_contents): allow
        EXTRA_CASES hooks for different arches to provide different reloc
        types.
        * seclet.h: #ifndef around it to allow multiple inclusion
        * srec.c: minor doc fix

Mon Sep 21 14:33:58 1992  Ian Lance Taylor  (ian@cygnus.com)

        * hosts/hp9000.h, hosts/irix3.h: changes from WRS.

Sun Sep 20 08:48:25 1992  Fred Fish  (fnf@cygnus.com)

        * configure.in:  Use i386-elf for all i386/i486 sysv4 hosts, not
        just ncr.

Thu Sep 17 06:40:46 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * bout.c (b_out_slurp_reloc_table): Clear howto field before
        filling in reloc, in case immediately following code doesn't set
        it.

Fri Sep 11 15:37:06 1992  Ian Lance Taylor  (ian@cygnus.com)

        * coffcode.h (coff_renumber_symbols): set the last renumbered
        symbol pointer to NULL, as expected by coff_write_linenumbers.
        (coff_write_relocs): apparently a non-zero addend is OK for reloc
        type R_IHCONST used on the 29k.

Thu Sep 10 13:28:24 1992  John Gilmore  (gnu@cygnus.com)

        * opncls.c (bfd_fdopenr):  Determine whether to fdopen for
        update, based on how the underlying file was opened.  Obsoletes
        FASCIST_FDOPEN.
        * hosts/rs6000.h, hosts/tahoe.h, hosts/vaxbsd.h:  Remove
        all FASCIST_FDOPEN config defines.

Tue Sep  8 21:37:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * sparc-opc.c: Moved to opcodes library, now that we have one.
        * Makefile: Don't compile it.

Tue Sep  8 10:10:34 1992  Ian Lance Taylor  (ian@cygnus.com)

        * aoutx.h: adjust_sizes_and_vmas did not return anything.

Thu Sep  3 19:29:04 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * section.c (bfd_set_section_flags):  Remove a sanity check.
        It is unfortunately broken, and prevents strip from working.

Thu Sep  3 16:14:40 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

        * sparc-opc.c (condr): Remove extraneous, but harmless, backlash
        created by last change.

Thu Sep  3 13:52:38 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * reloc.c (reloc_howto_struct):  Make size field be unsigned.
        * bfd-in.h:  Bump to version 2.0.

Thu Sep  3 09:05:37 1992  Stu Grossman  (grossman at cygnus.com)

        * bout.c, cpu-z8k.c:  Use enums when initializing structs to keep
        braindamaged HP/Apollo compiler happy.

Wed Sep  2 02:53:29 1992  John Gilmore  (gnu@cygnus.com)

        * format.c:  Fix description of search for matching target.
        * aoutx.h (some_aout_object_p):  Set SEC_CODE and SEC_DATA.
        * targets.c:  Update description of search for matching target.
        * Makefile.in (do_clean, clean):  Fix infant mortality typo.
        (docdir):  Set to ./doc, not ${srcdir}/doc, which has no makefile.
        (z8k and we32k files):  `*.o: *.c': avoid Sun Make bug.

Wed Sep  2 00:26:32 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Added mostlyclean/clean/distclean rules.

Tue Sep  1 13:38:40 1992  Per Bothner  (bothner@cygnus.com)

        * targets.c (target_vector):  Take out oasys (unless that is
        the default):  Because there is no magic number in archives,
        there can be annoying target mis-matches.

Mon Aug 31 10:11:37 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

        * sparc-opc.c: Rigorously updated to match architecture manual.

Mon Aug 31 08:07:58 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * aoutx.h (aout<n>swap_ext_reloc_out), bout.c
        (b_out_squirt_out_relocs): fix bug 1506 where abs symbols attached
        to the built-in abs_section were not written out correctly.

Fri Aug 28 16:29:15 1992  Ian Lance Taylor  (ian@cygnus.com)

        * archive.c (bfd_slurp_bsd_armap): if the symdef_count is too
        large, assume we're using a swapped byte order and fail with
        wrong_format rather than dumping core.

Fri Aug 28 15:38:03 1992  Ken Raeburn  (raeburn@cygnus.com)

        * Renamed opc-sparc.c to sparc-opc.c for systems with short
        filename constraints.
        * Makefile.in: Updated to reflect change.

Thu Aug 27 13:05:28 1992  Brendan Kehoe  (brendan@cygnus.com)

        Add preliminary support for the we32k:

        * Makefile.in, archures.c, coffocode.h, configure.in, targets.c:
        Minor edits.
        * coff-we32k.c, cpu-we32k.c, config/we32k.mt, hosts/we32k.h: New files.

Wed Aug 26 14:20:16 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * bout.c: added support for relaxable alignment relocs.

        * seclet.c (rel, seclet_dump_seclet, seclet_dump): get the app to
        pass down pointer to play area rather than use alloca

        * cpu-z8k.c (compatible): made static to reduce name space
        polution.

Tue Aug 25 08:39:10 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        Add basic support for the z8k:

        * Makefile.in, archures.c, coffcode.h, configure.in, reloc.c,
        section.c, targets.c, 

        * syms.c: move mis-inserted patch.

Fri Aug 14 15:39:29 PDT 1992  Howard Chu  (hyc@hanauma.jpl.nasa.gov)

        Documentation fixes:
        * ctors.c, format.c, section.c, reloc.c: append " -" to item tags.
        * reloc.c, section.c, syms.c, targets.c: add DOCDD before @node
                comments.
        * reloc.c: break out addend item from surrounding text.

        * doc.str (DOCDD): Defined. Adds text to output.
        (bodytext): Put bulletize before kill_bogus_lines.
        * chew.c (bulletize): End itemization after a blank line, to
        prevent following text from being swallowed up in an item.

Mon Aug 24 20:50:22 1992  Stu Grossman  (grossman at cygnus.com)

        * configure.in:  Add sparclite as a target.

Mon Aug 24 12:06:31 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * ieee.c (ieee_get_symtab): always null terminate the symbol list,
        lint.

        * coffcode.h (coff_add_missing_symbols): if symbols don't come
        from a coff file (csym is null), dont deref them

        * ieee.c (parse_expression): get the answer right when adding an
        abs+(sec+off), (ieee_generic_stat_arch_elt): call ieee_object_p
        on elts so that filename is filled in.

Thu Aug 20 19:05:48 1992  Ken Raeburn  (raeburn@cygnus.com)

        * bout.c (howto_align_table): New set of relocs, with enough
        data for "objdump -r" to work.
        (b_out_reloc_type_lookup): Recognize alignment relocs.

Tue Aug 18 12:57:45 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in: added FLAGS_TO_PASS, and used it for all recursive
        invocations of make.  Also, always create installation
        directories.

        * config/apollov68.mh: removed -g from CC definition.

Mon Aug 17 13:40:08 1992  Ken Raeburn  (raeburn@cygnus.com)

        * config/decstation.mh (HDEFINES): Specify "-G 4" to avoid
        overflowing gp-offset range.

Mon Aug 17 11:44:28 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * srec.c (srec_set_section_contents): don't write out sections
        without the LOAD and ALLOC attributes

Mon Aug 17 11:55:07 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * archures.c, cpu-m68k.c, cpu-sparc.c: Undo 16 June changes.
        * libaout.h (struct aout_backend_data): New callback "set_sizes".
        * aout-target.h (callback): Don't set page/seg sizes.
        (mkobject): Ditto.
        (set_sizes): New routine.
        (backend_data): Point to it.
        * aoutf1.h (sunos4_set_sizes): Heed architecture when setting sizes.
        (sunos4_aout_backend): Point to it.
        * aoutx.h (set_arch_mach): Call set_sizes callback.

Fri Aug 14 19:22:18 1992  Per Bothner  (bothner@cygnus.com)

        * aout-target.h:  Make _bfd_slurp_extended_name_table be
        the default.  Given that we *write* the suckers (for long
        archive member names), we really ought to be able to read them!
        * trad-core.c:  Don't include <machine/reg.h>.  It doesn't
        seem to be needed, and many machines don't have it.

Thu Aug 13 09:53:39 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-m68k.c (vector): read and write archives in coff format.

Tue Aug 11 12:19:42 1992  Ken Raeburn  (raeburn@cygnus.com)

        * opc-sparc.c: New file.

Sat Aug  8 23:15:35 1992  Fred Fish  (fnf@cygnus.com)

        * bout.c (bfd_reloc_status_type, callj_callback):  Cast void*
        pointers to bfd_byte* before performing arithmetic on them.  Such
        use with bare void* pointers is a gcc extension.
        * cache.c (bfd_cache_delete):  Forward decl with prototype form.
        * archive (normalize):  Add to CONST to match actual usages with
        CONST.

Mon Aug  3 00:35:29 1992  Fred Fish  (fnf@cygnus.com)

        * configure.in:  Recognize i486 host cpu, and use i386-elf
        for i486-ncr-sysv4.

Sat Aug  1 13:49:59 1992  Fred Fish  (fnf@cygnus.com)

        * config/stratus.mt (CC):  Remove definition.
        * elf.c (bfd_section_from_shdr):  Test for the possibility that
        section_from_elf_index returns NULL and don't dereference it.

Mon Jul 20 02:46:09 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

        * add hppa_data to bfd tdata (indirectly via sef).

        * config/hppahpux.mh: hpux is -DUSG (patch by sef)

Sat Jul 18 15:50:11 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: error messages to stderr, not stdout

Fri Jul 17 18:32:46 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * bfd.c, cache.c, coff-a29k.c, coff-i386.c, coff-i960.c,
          coff-m68k.c, coff-m88k.c, demo64.c, libaout.h, libbfd.c,
          oasys.c, opncls.c, sunos.c, targets.c: removed rcsid's.

Fri Jul 17 17:06:56 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: recognize hppa* instead of hppa

Thu Jul 16 16:39:25 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-m68k.c: added R_RELLONG_NEG reloc type, and changed
        RTYPE2HOWTO to cope with same.
        * reloc.c (bfd_perform_relocation): added support for size of -2
        (subtract a word reloc type). Updated doc.

Thu Jul 16 16:28:09 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: merged changes from progressive, removed rcsid.

        * archures.c, archive.c, Makefile.dos: removed rcsid.

Thu Jul 16 08:08:25 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * bfd-in.h : add BFD_IS_RELAXABLE flag
        * bout.c (bout_swap_exec_header_[in_out]): new field in exec
        header e_relaxable, major hackery in callbacks
        * libaout.h : add space for a_relaxable.
        * seclet.c (rel): don't relax empty sections
        

Wed Jul 15 07:57:46 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * section.c (STD_SECTION): add some casts to the initializers for
        dumb compilers

Tue Jul 14 14:06:28 1992  Stu Grossman  (grossman at cygnus.com)

        * rs6000-core.c (rs6000coff_core_p):  Greatly simplify expression,
        and add appropriate casts to keep (picayune) aix-cc happy.

Mon Jul 13 05:06:51 1992  John Gilmore  (gnu at cygnus.com)

        * elf.c (elf_slurp_symbol_table):  Now 2nd arg is where to write
        symbol pointers.  Punt expensive & useless bfd_realloc.  Use
        malloc for raw symbols, and free it before returning.
        (bfd_section_from_shdr):  Do not slurp symbol table until politely
        asked.  Do not even slurp string tables.
        (elf_get_symtab_upper_bound):  Count 'em without reading them.  
        (elf_get_symtab):  This is how to politely ask.  Schlurp!
        This should probably just *become* elf_slurp_symbol_table, FIXME.

Wed Jul  8 16:24:33 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * archive.c (bsd_write_armap): write the timestamp of the
        archive header to be just a little bit later than the timestamp of
        the file, otherwise the linker will complain that the index is
        out of date.

Tue Jul  7 00:23:23 1992  Fred Fish  (fnf@cygnus.com)

        * configure.in: Add m68k-ericsson-*.

Sat Jul  4 03:29:41 1992  John Gilmore  (gnu at cygnus.com)

        * syms.h:  Define BSF_FILE, update BSF_SECTION_SYM desc.
        * elf.c:  Remove unconditional debug printf's.
        (elf_write_object_contents, elf_slurp_symbol_table):  Handle
        BSF_SECTION_SYM <=> STT_SECTION, BSF_FILE <=> STT_FILE.
        (elf_slurp_symbol_table):  Hand out symbols in forward, not
        reverse order.  Simplify duplicate code.

Fri Jul  3 20:23:34 1992  Fred Fish  (fnf@cygnus.com)

        * elf.c:  Remove "(void)" casts from function calls where the
        return value is ignored, in accordance with GNU coding standards.

Tue Jun 30 16:49:12 1992  Fred Fish  (fnf@cygnus.com)

        * hppa.c:  Apply John's standard fix to avoid "empty translation
        unit" warnings from some ANSI-C compilers.

Thu Jun 25 04:39:25 1992  John Gilmore  (gnu at cygnus.com)

        * hosts/solaris2.h:  Configure same as sysv4.

Tue Jun 23 21:54:44 1992  Fred Fish  (fnf@cygnus.com)

        * libbfd.h, libbfd-in.h (bfd_seek):  Make prototype match definition.
        * reloc.c (bfd_default_reloc_type_lookup):  Make cast on return
        type match actual return type.
        * elf_print_symbol (section_name):  Make CONST.

Mon Jun 22 17:35:24 1992  Per Bothner  (bothner@cygnus.com)

        * i386linux.c, hosts/i386linux.h, config/i386-linux.mt:
        New files, for Linux (a free Unix clone for 386 machines).
        * Makefile.in, configure.in, targets.c:  Update accordingly.

Fri Jun 19 20:23:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
        Lints for bfd_reloc_code_type->bfd_reloc_code_real_type, and
        correct calling of howto special functions and fixes from Raeburn
        for gas<>bfdness
        * archures.c: nuke bfd_reloc_code_type
        * bout.c, cpu-h8300.c, coff-i960.c, coff-m88k.c: special function lint
        * coffcode.h (styp_to_sec_flags): STYP_INFO is marked as
        SEC_NEVER_LOAD, various other bfdgas newness
        * reloc.c->libbfd.h: change protype of bfd_default_reloc_type_lookup
        * targets.c: change jump table vector to above


Fri Jun 19 19:00:45 1992  John Gilmore  (gnu at cygnus.com)

        * elf.c (bfd_elf_find_section):  Mark as INTERNAL_FUNCTION so
        its prototype will be included in libbfd.h.  Change result type
        to struct * (rather than equivalent typedef) so it can be used in
        the prototype, where they typedef won't be known.
        * libbfd.h:  Updated version.

Fri Jun 19 15:21:56 1992  Stu Grossman  (grossman at cygnus.com)

        * Makefile.in, archures.c, configure.in, cpu-hppa.c, hppa.c, libhppa.h,
        targets.c:  HPPA merge.

Fri Jun 19 12:21:38 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Separate Solaris2 from SYSV4 on SPARC.
        * config/solaris2.mh:  Kludge around Sun compiler bug.

Wed Jun 17 14:02:46 1992  Stu Grossman  (grossman at cygnus.com)

        * libaout.h (aout_backend_data):  Change defs of two bitfields to
        be unsigned chars instead to get around rs6000 compiler problem.

Wed Jun 17 13:55:31 1992  Fred Fish  (fnf@cygnus.com)

        * elf.c (bfd_section_from_shdr, elf_slurp_symbol_table):
        Correct misconception that there can be only one symbol table.
        Only call elf_slurp_symbol_table on the full symbol table, not
        the dynamic one which is only a subset of the full one.

Wed Jun 17 15:54:57 1992  Ken Raeburn  (Raeburn@Cygnus.COM)

        * coffcode.h (coff_compute_section_file_positions): For I960,
        don't align sections in file.

Tue Jun 16 06:28:21 1992  Ken Raeburn  (Raeburn@Cygnus.COM)

        * targets.c (struct bfd_target): Added field for target-specific
        (but not file-specific) data, for distinguishing minor
        characteristics between (e.g.) a.out formats.

        * section.c (struct sec): New field user_set_vma indicates vma
        field should be heeded, not assumed to be unset.
        (STD_SECTION): Initialize that field of standard sections to zero.
        * bfd-in.h (bfd_set_section_vma): Set user_set_vma to true.

        * coffcode.h (coff_write_relocs): Write out swapped reloc, not
        pre-swapped version.

        * archures.c (struct bfd_arch_info): Fixed order of comment and
        field decl.  New fields indicate size of page and segment for
        architecture.
        * cpu-m68k.c (N): Fill in values.
        * cpu-sparc.c (arch_info_struct): Ditto.

        * libaout.h (struct aout_backend_data): Various bits of data (not
        all used currently) with characteristics of a.out implementation.
        Important field for now is text_includes_header, indicating that
        the text section starts immediately after the file header, which
        gets mapped in with it.
        (struct aout_data): New fields indicate whether vma has been
        adjusted yet (not yet used), and what magic number will be used in
        the output file (should go away in favor of vma_adjusted).
        (WRITE_HEADERS): Code for dealing with section sizes and related
        header fields replaced with call to adjust_sizes_and_vmas.
        * aoutx.h (some_aout_object_p): Fill in magic number field.
        Set WP_TEXT flag for ZMAGIC as well as NMAGIC files.
        (set_arch_mach): Set page size and segment size once CPU
        type is known.
        (adjust_sizes_and_vmas): New function; has much code moved
        from set_section_contents and WRITE_HEADERS.  Sets or adjusts vma
        and size parameters, as well as many header fields, after deciding
        on magic number for output file.  Checks to ensure that this
        adjustment has only been done once.
        (set_section_contents): Call adjust_sizes_and_vmas instead of
        doing much of the work here.

        * aout-target.h (MY_make_debug_symbol, MY_backend_data): Provide
        default (null) values of these fields.
        * aoutf1.h (sunos4_write_object_contents): Don't override a_text
        value in exec header.
        (sunos4_aout_backend, MY_backend_data): Define backend data
        indicating file header is included in text section.

        * aoutf1.h (MY_reloc_howto_type_lookup): Fix typo.

        * hosts/sparc.h (abort, exit): Hide these names if compiling with
        gcc version 2, to avoid warnings.

Mon Jun 15 12:26:56 1992  Fred Fish  (fnf@cygnus.com)

        * config/ncr3000.mh (INSTALL, RANLIB):  Don't use /usr/ucb/install,
        it's broken on ncr 3000's.  Use simple "true" for RANLIB.

Sat Jun 13 09:16:43 1992  Michael Tiemann  (tiemann@rtl.cygnus.com)

        * configure.in (m680[01234]0-wrs-*): Fix typo in match pattern.

Fri Jun 12 19:48:34 1992  John Gilmore  (gnu at cygnus.com)

        * section.c (STD_SECTION):  Remove extra semicolon in declarations.
        * configure.in:  Rewrite target parsing to use simple format.
        Handle sparc-sun-solaris2 configuration.
        * aout64.h:  Avoid ANSI C brain death warning.
        * elf.c:  Avoid trigraph (???) or /* in comments.

Fri Jun 12 14:51:14 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config/sysv4.mh: new file, RANLIB=echo

        * configure.in: handle Solaris2 as -sysv4 or -solaris2

Thu Jun 11 00:52:03 1992  John Gilmore  (gnu at cygnus.com)

        * elf.c (elf_obj_tdata):  Merge elf_obj_tdata_struct and
        elf_core_tdata_struct into a single common struct.  Core files
        wouldn't have worked at all without this.
        (bfd_elf_find_section):  New function for GDB's undercover use
        to find string sections that BFD hides from it.
        (elf_get_str_section):  Avoid multiple alloc&reads for same data;
        lint.
        (elf_object_p, elf_core_file_p):  Allocate internal file header
        storage dynamically.
        * bfd.c (union {...} tdata):  Remove elf_core_tdata_struct.
        * demo64.c:  Prevent "empty translation unit" warnings from idiots.

Tue Jun  9 17:15:26 1992  Fred Fish  (fnf at cygnus.com)

        * config/{i386v4.mh, ncr3000.mh}:  Update RANLIB, add INSTALL.

Sat Jun  6 17:02:51 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Handle Solaris2 as *-sun-sysv4 or as *-sun-sunos5.

Sun May 31 05:45:00 1992  david d `zoo' zuhn (zoo@cygnus.com)

        * configure.in: handle m680[01234]0 as aliases for m68k

Tue May 26 16:50:59 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
        
        * coff-a29k.c: do byte relocs correctly
        * coffcode.h (styp_to_sec_flags): never load INFO sections
        * seclet.c (rel): don't relocate INFO sections

Wed May 20 08:18:18 1992  Ken Raeburn  (Raeburn@Cygnus.COM)

        * section.c (bfd_*_symbol, bfd_*_section): Initialize statically.
        Make the symbols unmodifiable.
        (bfd_section_init): Deleted.
        * init.c (bfd_init): Don't call bfd_section_init.

        * section.c (bfd_set_section_contents): Ensure that range to be
        written is within section boundaries.
        (bfd_get_section_contents): Likewise.  Don't bother dispatching if
        size is zero.

        * libbfd.c (bfd_xmalloc): Text of error message should be const.

        * coff-i960.c (howto_table): Deleted.
        (howto_rellong, howto_iprmed, howto_optcall): New vars;
        interesting entries from old howto_table.
        (RTYPE2HOWTO): Adjusted to use switch.
        (coff_i960_reloc_type_lookup): New function.

        * coffcode.h (coff_new_section_hook): Allocate storage for aux
        records for section symbol.
        (make_abs_section): Unused; deleted.
        (renumber_symbols): Re-order symbols so undefined symbols come
        last, as COFF format desires.
        (coff_write_symbol): Put C_FILE symbols in debug section always.
        (coff_section_symbol): New function; creates a symbol with the
        same name as a section, and sets up aux records for it.
        (coff_add_missing_symbols): New function; adds section symbols to
        symbol table if they aren't there already.  Should someday also
        add a dummy C_FILE symbol if none is present.
        (coff_write_object_contents): Add missing symbols before preparing
        symbol table to be written.
        (coff_slurp_reloc_table): Verify that symbol indices read in are
        in a reasonable range.
        * libcoff-in.h (struct coff_tdata): New field conv_table_size.
        (obj_conv_table_size): Accessor macro.

        * bout.c (b_out_reloc_type_lookup): New function.  Handles three
        reloc types on i960.

        * bfd-in.h (bfd_get_section_name): New macro.  Like
        bfd_section_name, but returns rvalue, not lvalue.
        (bfd_get_section_vma, bfd_get_section_alignment): Similar.
        (bfd_get_section_flags): Now returns rvalue.

        * reloc.c (enum bfd_reloc_code_real): Add several new values, some
        general, some specific to sparc or i960.

        * aoutx.h (set_section_contents): Set VMA for each section based
        on previous section.  If text section VMA doesn't appear to have
        been set, make a best guess from the type of file.

        * aout-target.h (MY_reloc_howto_type_lookup): Define as zero if
        not defined.
        (MY(vec)): Initialize reloc_type_lookup field.

        * aoutx.h (howto_table_*): Export as aout_#_*_howto_table.
        (bfd_error_trap, bfd_error_vector): Extern, not common.

        * aoutf1.h (sunos4_reloc_type_lookup): New function.  Handles a
        few types of relocs for sparc; will need enhancement.

        * bout.c (callj_callback): Use DEFUN macro in definition.
        * coff-i960.c (optcall_callback): Likewise.

        * targets.c (bfd_target): Added fields reloc_type_lookup and
        _bfd_make_debug_symbol.  Also minor comment changes.
        * syms.c (bfd_make_debug_symbol): New dispatching macro.
        * reloc.c (bfd_reloc_type_lookup): Take a BFD ptr as arg rather
        than arch info, and dispatch with BFD_SEND.  Callers changed.
        * archures.c (struct bfd_arch_info): Deleted field
        reloc_type_lookup.
        * cpu-*.c: Don't initialize that field.

        * bfd-in.h (enum bfd_error): Add new value "bad_value".
        * bfd.c (bfd_errmsgs): Now const; added entry for bad_value.
        (bfd_errmsg): Now returns ptr to const.
        * bfd-in.h (bfd_errmsg): Fix prototype.

        * cache.c (BFD_CACHE_MAX_OPEN): Fix typo in doc.
        * reloc.c (bfd_generic_relax_section): Ditto.

        * section.c (Section Output doc): Improve description of use of
        output_section and output_offset.

Tue May 19 23:42:10 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

        * sco-core.c: new file from net.
        * aoutx.h (translate_to_native_sym_flags): bugfix from net:
          Now we have the hairy linker, it's possible to move symbols from
          one section into another.  Actually make that work!

Sat May 16 17:57:59 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * hosts/sun3.h: fix declaration of free.

Tue May 12 14:08:59 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-a29k.c (perform_reloc): fix bug in jmp/call evaluation
        * coff-h8300.c (reloc_processing): all relocs are relative to
        section start.
        * opncls.c: don't use fdopen on DOS systems

        short patches from Glenn Kasten (glenn@ready.com)
        * target.c: enabled oasys support
        * oasys.c:  Insert . when UNDERSCORE_HACK is enabled, 
        fix problem where a relocation which crossed a modification byte
        boundary did not work. Fix problem where a relocation near the end
        of a data record did not work.
        

Tue May  5 18:11:25 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * archive.c (bfd_slurp_coff_armap): old versions of BFD wrote
        archvie header string counts the endian way, this heuristic sees
        how big an archive string to read by trying it one way and if the
        string table is unreasonably big, trying it the other. *FIXME*.
        * opncls.c (bfd_fdopenr): can't do fdopens on VMS

Tue May  5 14:18:24 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * bfd-in.h:  Increase version number to 1.97, for consistency
        with ../binutils.
        * Makefile.in:  docdir is ./doc, not ${srcdir}/doc.

Mon May  4 11:49:15 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * bfd-in.h: bump version to 1.96
         Major change; changed calling convention for
         bfd_get_relocated_section_contents so that caller allocates
         memory for section data.
        * coffcode.h (bfd_coff_get_relocated_section_contents), reloc.c,
        seclet.c, targets.c, bfd.c: reflect new convention.
        * coffcode.h (styp_to_sec_flags): if styp_flags is not a special
        case, then use reasonable default values for SEC_* flags.

Fri May  1 12:58:34 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coffcode.h (coff_write_object_contents): use RELSZ to work out
        size of output reloc struct.
        * targets.c, Makefile.in: comment out tekhex for the moment.
        * ieee.c: if some places where null pointers were used instead of &bfd_abs_section.
        * configure.in: tandem target is st2000
        * coff-m68k.c: rename static howto_table to global
        m68kcoff_howto_table.
        * bout.c: remove unnecessary abort
        * coff-a29k.c: various changes to the way relocations work to cope
        with the "new order" and latent bugs.
        * coffcode.h: lint

Wed Apr 29 12:37:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * aoutx.h (aout_swap_ext_reloc_out, aout_swap_std_reloc_out)
        bout.c (b_out_squirt_out_relocs): treat abs sumbols the right way.
        * reloc.c (bfd_perform-relocation): don't relocate refs to
        absolute symbols if doing a partial link.

Fri Apr 24 07:35:26 1992  Stu Grossman  (grossman at cygnus.com)

        * configure.in:  Add a29k-amd-udi.

Thu Apr 23 18:37:55 1992  Fred Fish  (fnf@cygnus.com)

        * aoutx.h (aout_<bits>_swap_exec_header_in):  Zero out the
        internal_exec structure before initializing the fields that
        are used, so that the unused fields are in a known state.

Wed Apr 22 09:36:08 1992  Fred Fish  (fnf@cygnus.com)

        * tekhex.c (struct data_struct):  Convert from typedef that
        typedefs nothing to a normal structure declaration.
        * tekhex.c (pass_over):  Prototype args for function that 
        second arg points to.

Mon Apr 20 22:22:51 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: remove old style staging.  Do not print recursion
          lines.

        * Makefile.in: rework CFLAGS so that CFLAGS can be passed from the
          Makefile command line.  Remove MINUS_G.  Default CFLAGS to -g.
          Pass CFLAGS.

Fri Apr 17 09:15:31 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * bfd.c, Makefile.in: added tekhex
        * aoutx.h (set_section_contents): pages should be padded to the
        size of a page, not the size of a segment.
        * configure.in: added go32 host and i386-aout target.
        * i386aout.c, libaout.h: now works for go32 target
        * ieee.c: fix bit rot.
        * seclet.c: support for padding seclet type.

Wed Apr 15 18:11:58 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: added .NOEXPORT:

Tue Apr 14 14:34:42 1992  Fred Fish  (fnf@cygnus.com)

        * elf.c (bfd_add_strtab, bfd_add_2_to_strtab):  CONST spreads
        like ooze.
        * elf.c (elf_compute_section_file_positions,
        elf_write_object_contents):  Return boolean, not NULL (which
        can be void *).
        * elf.c (bfd_section_from_shdr):  Ifdef-out debugging code.
        Also ifdef-out code that aborts on unhandled section types.

Fri Apr 10 22:29:18 1992  Fred Fish  (fnf@cygnus.com)

        * configure.in:  Recognize ncr3000 config
        * Makefile.in (MINUS_G):  Pass on to recursive makes.
        * hosts/ncr3000.h, config/ncr3000.mh:  Add host config files.

Thu Apr  2 17:42:45 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Now that we have sym.h and symconst.h, compile
        coff-msym.c on all systems.
        * config/{decstation.mh, irix3.mh, irix4.mh}:  Remove coff-msym.o dep.
        * coff-msym.c:  Update include files and comments; add weakext bit.

Wed Apr  1 23:16:38 1992  John Gilmore  (gnu at cygnus.com)

        * archive.c, bfd.c, bout.c, coffcode.h, init.c, reloc.c,
        section.c, srec.c, syms.c, coff-h8300.c:  Lint.

Sun Mar 29 09:37:59 1992  John Gilmore  (gnu at cygnus.com)

        * bout.c, coff-a29k.c, coff-i960.c:  Lint.
        * configure.in:  Add new host and target configs.
        * elf.c (bfd_prstatus, bfd_fpregset):  Avoid typename of register
        structs, which vary; just use member name. 
        (elf_object_p, elf_core_file_p):  Lint, fix comments.
        * config/sparc-elf.mt, hosts/sysv4.h:  New config files.        

Sat Mar 28 13:07:02 1992  Fred Fish  (fnf@cygnus.com)

        * elf.c (elf_object_p, elf_core_file_p):  Fix to use only a single
        local, disposable, copy of the external form of section header
        table and program header table entries.

Thu Mar 26 16:59:58 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Set MINIMIZE back to 0 for a real release.

Tue Mar 24 15:57:03 1992  K. Richard Pixley  (rich@cygnus.com)

        * configure.in: config/irix4.m[ht], hosts/irix4.h: add support for
          irix4.

Mon Mar 23 22:37:34 1992  Stu Grossman  (grossman at cygnus.com)

        * coff-msym.c (ecoff_swap_rfd_in):  remove & for array ref.

Tue Mar 17 14:12:25 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * bout.c (b_out_slurp_reloc_table):  Use BFD_ASSERT macro,
        not internal bfd_assert function (twice).

Tue Mar 17 10:45:12 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * aout-target.h: change ar_max_namelen to 15 (the right value)
        * coff-a29k, coffcode.h: more hangovers from the bfd_abs_section
        change

Mon Mar 16 14:57:22 1992  Steve Chamberlain  (sac@rtl.cygnus.com)

        * archive.c (bfd_generic_archive_p): check for bout archives too.
        * bout.c: make it work again.

Sat Mar 14 17:30:40 1992  Fred Fish  (fnf@cygnus.com)

        * elf.c (elf_corefile_note):  Call bfd_xmalloc() instead of bare
        malloc().
        * reloc.c (bfd_generic_get_relocated_section_contents):  Call
        bfd_xmalloc() instead of bare malloc().

Fri Mar 13 15:44:37 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: pass down MAKEINFO on info.

Fri Mar 13 07:41:13 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * config/mt-<foo> now <foo>.mt, config/mh-<foo> now <foo>.mh.
        host/h-<foo> now just <foo>. 
        * configure.in: reflect changes

Thu Mar 12 11:15:02 1992  Per Bothner  (bothner@cygnus.com)

        * libbfd-in.h (set_tdata):  Make change of Feb 27 in the
        actual source file, not just the generated libbfd.h.

Sat Mar  7 10:33:41 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * coff-i960.c (icoff_little_vec): add COFF_SWAP_TABLE so we can run
        gdb on little-endian 960 code. 
        * archive.c (compute_and_write_armap): indirect symbols should go
        into the archive header too.

Fri Mar  6 21:55:16 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: added check target.

Thu Mar  5 23:51:42 1992  John Gilmore  (gnu at cygnus.com)

        * coff-msym.c:  Move this file from gdb/ecoff.c.  It
        handles byte-swapping for ECOFF (MIPS symbol) files.
        * config/mh-decstation, config/mh-irix3:  Add coff-msym.o
        to the files built on MIPS-based hosts.
        * Makefile.in:  Add rule for coff-msym.

Thu Mar  5 21:36:05 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: added clean-info target.  MINIMIZE=1.

Sun Mar  1 22:32:58 1992  Per Bothner  (bothner@cygnus.com)

        * coff-rs6000.c:  Move core file functions into separate
        new file rs6000-core.c.  This is needed because reading
        core files depends on native include files that conflict
        with ../include/coff/rs6000.h.
        * config/mh-rs6000:  Add rs6000-core.o to HDEPFILES.

Thu Feb 27 22:19:55 1992  Per Bothner  (bothner@cygnus.com)

        * aoutx.h (NAME(aout,print_symbol)): Don't print
        symbol addresss for undefined symbols.
        * coff-rs6000.c:  Various updates (due to target-
        independent changes).
        * libbfd.h:  Ditto (tdata field is now a union).
        * hosts/h-sparc.h:  Removed prototype for bogus function
        'emset' (presumably should have been 'memset' - which is there).

Thu Feb 27 11:46:33 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in (mips-big-* target):  Same is Iris.

Thu Feb 27 09:24:56 1992  Steve Chamberlain  (sac at thepub.cygnus.com)

        * aoutx.h (translate_from_native_sym_flags): when creating an
        alias symbol, fill in the section as undefined, rather than
        leaving it blank. If an output section can't be found for a
        symbol, then don't core dump.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in, configure.in: removed traces of namesubdir,
          -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
          copyrights to '92, changed some from Cygnus to FSF.

Wed Feb 26 19:40:59 1992  Steve Chamberlain  (sac at thepub.cygnus.com)

        * bfd.c: lint
        * coff-h8300.c: fix stupid reloc subtraction bug
        * coffcode.h (coff_swap_aux_out): only swap a tvndx by 2 bytes,
        since that's how wide it is. (coff_slurp_symbol_table): always zero out
        the symbol.flags and done_lineno fields.

Tue Feb 25 14:29:24 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * coffcode.h (coff_write_symbol): write out the correct number of
        auxents. 
        * cpu-h8300.c: fix disassembly bug

Fri Feb 21 21:39:56 1992  John Gilmore  (gnu at cygnus.com)

        * bfd-in.h (bfd_errmsg), coffcode.h (coff_swap_aux_in,
        section_from_bfd_index), cpu-h8300.c (howto*_callback),
        reloc.c, section.c (bfd_map_over_sections), targets.c
        (bfd_target_list):  Protolint.
        * libbfd.h:  Update to match a libbfd-in.h from a month ago.

Fri Feb 21 10:57:54 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * coffcode.h (coff_swap_aux_in): lint, (coff_print_symbol): prints
        out tagndx too.
        * aoutx.h (swap_std_reloc_out, swap_ext_reloc_out): use the output
        section of a symbol rather than the section of a reffed symbol to
        determine the r_index of an emmitted reloc.

Thu Feb 20 18:10:34 1992  Per Bothner  (bothner at cygnus.com)

        * PORTING: New (preliminary) porting guide.

Wed Feb 19 21:39:37 1992  John Gilmore  (gnu at cygnus.com)

        * bout.c (callj_callback), coff-a29k.c (a29k_reloc), coff-m88k.c
        (howto_hvrt16):  lint.

Mon Feb 17 12:02:17 1992  Per Bothner  (bothner at cygnus.com)

        * hp300bsd.c (new), config/mt-hp300bsd:  Make hp300bsd
        a full configuration (with possible cross-development),
        instead of using host-aout.c.

Sun Feb 16 13:01:49 1992  Per Bothner  (bothner at cygnus.com)

        * aout-target.h (MY(write_object_contents):
        Set obj_reloc_entry_size (abfd).
        * gen-aout.c:  Change to emit a .c files, not a .h file.

Thu Feb 13 20:11:47 1992  Fred Fish  (fnf at cygnus.com)

        * elf.c (elf_slurp_symbol_table):  Remove obsolete use of
        BSF_ABSOLUTE and replace with bfd_abs_section reference.

Thu Feb 13 17:22:44 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * coffcode.h (get_normalized_symtab): fixed bug where symbols
        with more than one auxent can cause nasty core dumps. 

        * coffcode.h, libcoff.c: added new fielded to coff_symbol_struct
        "done_lineno" so that a symbol which appears twice in the symbol
        table only gets it's linenumbers relocated once. Modifed
        (coff_write_native_symbol) and (coff_make_empty_symbol) to make
        use of it.

Tue Feb  4 15:39:55 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * aoutx.h: (translate_from_native_sym_flags): fix constructor
        stuff to use the New Order.

Fri Jan 31 01:34:45 1992  Stu Grossman  (grossman at cygnus.com)

        * ieee.c:  Change type of envi[] to unsigned char.

        * configure.in:  fix vax ultrix configuration.

        * elf.c (bfd_section_from_shdr):  Deal with null return from
        bfd_make_section().  (elf_object_p):  Select endianess properly.

Fri Jan 31 01:19:55 1992  John Gilmore  (gnu at cygnus.com)

        * hosts/h-tahoe.h, h-vaxbsd.h:  Fix stack in core files.

Thu Jan 30 23:51:07 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  host-aout.c doesn't depend on aout-params.h.
        * aout-target.h:  Use TARGET_BIG_ENDIAN_P to set up vector.
        * host-aout.c:  Don't use aout-params.h; configure these systems
        in their xm files, not in a randomly generated file.
        * hosts/h-hp300bsd.h, h-tahoe.h, h-vaxbsd.h, h-vaxult.h:
        Specify byte order.
        * hosts/h-vaxbsd.h:  Define the form of exec and core files.

Thu Jan 30 13:02:41 1992  Per Bothner  (bothner at cygnus.com)

        * config/mt-tahoe, config/mt-vax:  Change DEFAULT_VECTOR to
        host_aout_vec here as well.

Thu Jan 30 11:41:45 1992  Stu Grossman  (grossman at cygnus.com)

        * host-aout.c:  Change TARGETNAME to "a.out" to be compatible with
        gdb.  config/mt-hp300bsd:  Change DEFAULT_VECTOR to host_aout_vec
        to prevent undefined symbol.

Thu Jan 30 07:26:53 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        Various lints found on PersSony
        * aoutx.h: cast an enum 
        * coff-a29k.c: many ints in reloc structure turned to enum
        * coffcode.h: more enums
        * cpu-h8300.c: more enums
        * opncls.c: more enums

Thu Jan 30 01:19:56 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Make Tahoe configuration work again.
        * bfd-in.h:  Remove trailing comma from enum declaration.
        * ieee.c:  Can't put byte values >0x7F into a signed char.

Tue Jan 28 21:10:51 1992  Fred Fish  (fnf at cygnus.com)

        * Makefile.in:  Add dependencies for various coff-*.o files.

        * elf.c:  Remove extraneous paren from core_prpsinfo and
        core_prpstatus macros, rename core_prpstatus to core_prstatus.
        Replace references to old section "size" member with new
        "_raw_size" member.  Implement elf_make_empty_symbol, which
        is now used.

Tue Jan 28 14:51:40 1992  Stu Grossman  (grossman at cygnus.com)

        * trad-core.c, bfd.c, ../include/bfd.h:  Various fixes for PMAX
        core reading.

Tue Jan 28 10:46:32 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * coffcode.h (bfd_coff_relax_section): now static.
        (bfd_coff_get_relocated_section_contents): various type lints.

Mon Jan 27 19:44:08 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        New entry point in the transfer vector - bfd_relax_section.

        * aout-target.h: add to vector, call generic_relax
        * bfd-in.h: add to vector
        * bfd.c: add #define for vector
        * bout.c: add to vector, call generic_relax
        * coffcode.h: add to vector, also now has coff specific relax code
        for the relaxable H8/300 relocs. Also clean up abs section cruft.
        * elf.c: call generic_relax
        * ieee.c: call new vector, clean up some bugs due to the creation
        of bfd_abs_section
        * libbfd.h: add bfd_generic_relax_section EXFUN
        * oasys.c: call generic_relax
        * reloc.c: implement generic_relax
        * seclet.c: moved much of this into coffcode.h
        * srec.c: call generic_relax
        * targets.c: define new transfer vector

Fri Jan 24 14:40:17 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * everything: now modified to use smaller reloc type. Self hosts
        on sun3 & sun4.

Sat Jan 18 17:00:16 1992  Fred Fish  (fnf at cygnus.com)

        * config/mh-stratus, config/mt-i860-elf, hosts/h-stratus:
        New files for stratus.

        * configure.in:  Add configuration fragments for stratus.

Wed Jan 15 10:02:43 1992  Fred Fish  (fnf at cygnus.com)

        * aoutx.h (NAME(aout,find_nearest_line)): Declare various filename
        variables as CONST since they are set to point to a const char
        string.  Fixes compiler complaints.

Fri Jan 10 17:44:53 1992  Fred Fish  (fnf at cygnus.com)

        * hosts/h-amix.h hosts/h-i386v4.h:  Change abort() to a function
        returning void.

Fri Jan 10 14:33:32 1992  Per Bothner  (bothner at cygnus.com)

        * aoutx.h (NAME(aout,find_nearest_line)):  Recognize N_SOL
        symbols, so that we can emit the correct file name even
        if it's an include file.

Thu Jan  2 16:43:34 1992  John Gilmore  (gnu at cygnus.com)

        * coff-i960.c:  Add COFF_SWAP_TABLE to little_vec as well as big_vec.
        (Reported by john@labtam.labtam.oz.au (John Carey)).

Wed Jan  1 04:23:06 1992  Fred Fish  (fnf at cygnus.com)

        * elf.c:  Change all '#if HAVE_PROCFS' to '#ifdef HAVE_PROCFS'.

        * config/mh-amix, config/mh-i386v4:  Remove HDEFINES that was
        being used to -DHAVE_PROCFS.

        * hosts/h-amix, hosts/h-i386v4:  Add '#define HAVE_PROCFS'.  Move
        '#include "fopen-same.h"' to end of file to match other h-* files.

Fri Dec 20 12:06:17 1991  Fred Fish  (fnf at cygnus.com)

        * configure.in:  Change svr4 references to sysv4.  Add case
        "unknown" for target vendor and infer some targets based
        on the specified operating system.

Wed Dec 18 17:17:59 1991  Stu Grossman  (grossman at cygnus.com)

        * bfd-in.h, libaout.h:  ANSIfy enums.

Wed Dec 18 16:12:25 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * archive.c (normalize): created version for VMS which removes the
        VMS directory crap from the front and end of a filename, eg turn
        [-.foo]bar.obj;123 into bar.obj
        (bfd_construct_extended_name_table): now writes index into an
        extended name table in decimal - the same base used to read an
        extended name table.

Wed Dec 18 14:40:39 1991  Per Bothner  (bothner at cygnus.com)

        * aout-encap.c:  Fix to use aout-target.h.
        * aoutf1.h:  Use standard MY_object_p and MY_callback
        in aout-target.h.  Remove target-specific versions.
        * host-aout.c:  Re-write to use aout-target.h.
        * gen-aout.c:  New files use with host-aout.c to generate
        host-specific a.out-related parameters.
        * Makefile.in:  host-aout.o depends on aout-params.h, which is
        generated by gen-aout.
        * aout-target.h:  Make a little more flexible.
        * libaout.h, aout-target.h:  Removed WORK_OUT_FILE_POSTIONS
        macro.  Instead, inline it in aout-target.h.
        * newsos3.c:  Define N_SHARED_LIB(x) as 0 to avoid
        a gcc -Wall warning.
        * archive.c:  Add missing commas in DEFUN macro (2 places).
        * elf.c, coffcode.h, aoutf1.h:  Use ANSI functions instead of
        Berkeley ones, now that libiberty has them:
        bcopy->memcpy, bzero->memset, bcmp->memcmp.
        * aoutx.h:  Various touch-ups:  Re-formatting, fix a cast,
        remove unused variable.

Tue Dec 17 19:48:59 1991  Fred Fish  (fnf at cygnus.com)

        * elf.c (elf_core_file_matches_executable_p):  Enclose corename
        and execname inside HAVE_PROCFS ifdef since they are unused
        when it is not defined.

Mon Dec 16 12:00:10 1991  Fred Fish  (fnf at cygnus.com)

        * elf.c:  Flag all sections as either code or data.  We can't
        be sure what they are anyway, since ELF doesn't fit the
        traditional model of text+data+bss very well.  Add new local
        function elf_read() to simplify code.  Record entry point in
        the bfd structure.

Thu Dec 12 21:01:22 1991  John Gilmore  (gnu at cygnus.com)

        * hosts/h-*.h:  Configure fopen using ../include/fopen-*.h
        rather than N copies of the same lines.

Wed Dec 11 16:39:45 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * cpu-h8300.c: disassemble branch displacements correctly
        * coff-h8300.c: put reloc offsets out in 32bits

        * makefile.dos, configdj.bat: New files from DJ
        * cache.c: fopen with new macros is needed for DOS.
        * ieee.c: environ renamed to envi to stop an include file
        conflict.
        * opncls.c, coff-rs6000.c: more fopens with macros.

Tue Dec 10 04:07:24 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: infodir belongs in datadir.

Sat Dec  7 16:39:23 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

         * Makefile.in: fix where docdir lives

         * aoutx.h, archive.c, archures.c, bfd.c, cache.c, coff-m88k.c,
         coffcode.h, core.c, ctor.c, elf.c, format.c, ieee.c, init.c,
         libbfd.c, libbfd.h, libcoff.h, opncls.c, reloc.c, section.c,
         srec.c, syms.c, targets.c : all new documentation and lint
         removal.


Sat Dec  7 07:22:09 1991  John Gilmore  (gnu at cygnus.com)

        * coffcode.h, srec.c:  Lint.

Fri Dec  6 22:58:48 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: install using INSTALL_DATA, added standards.text
          support.

        * configure.in: mark directory as target dependent.  configure
          nows works in objdir always so make file existence checks
          against ${srcdir}.

Thu Dec  5 22:46:19 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: idestdir and ddestdir go away.  Added copyrights
          and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
          and mandir now keyed off datadir by default.

Wed Dec  4 10:14:17 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * aoutf1.h (sunos_<size>_object_p, sunos4_callback): moved the
        computation of arch and machine type so it's worked out before
        some_aout_object_p is called. 
        * aoutx.h: (some_aout_object_p): don't set arch and mach to
        unknown.
        * archures.c: add extra field 'section_align_power' to hold
        default section alignment in object files.
        * cpu-a29k.c, cpu-h8300.c, cpu-i386.c, cpu-i960.c, cpu-m68k.c,
        cpu-m88k.c, cpu-mips.c, cpu-rs6000.c, cpu-sparc.c, cpu-vax.c:
        initialize the new field.
        * bout.c (b_out_callback): replace the text size, since aout
        fries them.
        * aoutx.h: Documentation in the new style

Wed Dec  4 02:00:30 1991  John Gilmore  (gnu at cygnus.com)

        * bfd.c (bfd_get_mtime):  Don't cache mtime any more; only
        use the saved value if mtime_set is already set (intended
        for archive files, though apparently not used yet).

Tue Dec  3 22:54:50 1991  John Gilmore  (gnu at cygnus.com)

        * targets.c:  Revise comments about how to configure the target
        vector, to match reality.  Remove mention of obsolete methods.
        Remove long lists of capitalized macros that turn into the same
        thing in lowercase.  Normal vector simply lists all known
        lowercase xvec names; all other cases are handled by SELECT_VECS.

        * config/mt-i386-coff:  Set DEFAULT_VECTOR to real identifier,
        not macro name.

        * config/mt-i960-{coff,bout}:  Use SELECT_VECS to make a short
        list of supported targets.

Tue Dec  3 14:06:15 1991  Per Bothner  (bothner at cygnus.com)

        * archive.c (bsd_write_armap):  The pad byte sometimes added to
        the string table in a __.SYMDEF member is now
        counted as part of the size of the string table.
        This is compatible with the old ranlib, as well as Sun's.

Tue Dec  3 10:53:30 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * srec.c: Rewrote to fix many bugs; now gets the record type
        right, doesn't choke on input, sets the start address in an S9 and
        fills in the filename on an S0.

Sat Nov 30 21:19:15 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * cpu-h8300.c: Add support for MEMIND addressing mode

        * coff-a29k.c: defined RELOC_PROCESSING to take the #ifdef out of
        coffcode.h
        * coffcode.h: use the new macro if available

        * elf.c (elf_corefile_note): cast malloc to avoid warning.
        * Makefile.in: Fixed dependencies due to file rename

        * aout-encap.c, aoutf1.h, aoutx.h, archive.c, bout.c, coff-a29k.c,
        coff-h8300.c, coff-i386.c, coff-i960.c, coff-m68k.c, coff-m88k.c,
        coff-mips.c, coff-rs6000.c, cpu-h300.c, elf.c, i386aout.c,
        newos3.c, stab-syms.c, syms.c: All these files have had their
        #includes altered to point to the new places.

Fri Nov 29 20:04:49 1991  Fred Fish  (fnf at cygnus.com)

        * config/mh-i386v4, config/mh-i386-elf, hosts/h-i386v4.h:  New files.

        * configure.in:  Add vendor "ncr" as supported per-target vendor.
        Add svr4 case for i386 per-host case.

        * elf.c (elf_object_p, elf_core_file_p):  Add missing "break" to
        ELFDATA2LSB cases.

Fri Nov 29 12:16:51 1991  Per Bothner  (bothner at cygnus.com)

        * syms.c (bfd_decode_symclass):  Return 'A'
        for symbols that are both absolute and global.
        * archive.c (bfd_special_undocumented_glue):  Return NULL
        if bfd_ar_hdr_from_filesystem returns NULL.

Tue Nov 26 09:10:55 1991  Steve Chamberlain  (sac at cygnus.com)

        * Makefile.in: added coff-h8300
        * configure.in: now h8 is a coff target
        * cpu-h8300.c: fix various disassembly problems
        * libcoff.h: took out some code which has been #0ed for a long
        time.
        * targets.c: added h8 coff 
        * coff-a29k.c, coff-i386.c, coff-i960.c, coff-m68k.c, coff-m88k.c
        added new macro RTYPE2HOWTO to take a load of #ifdefs out of
        coffcode.h
        * coffcode.h: Started to change the way machine dependencies are
        handled, from the nest of #ifdefs to macros defined in the
        including coff-<foo>.c

Fri Nov 22 08:11:42 1991  John Gilmore  (gnu at cygnus.com)

        * aoutx.h (some_aout_object_p):  Set the `executable' bit
        if the entry point is contained in the text segment, even if the
        text segment is at location 0.

        * coff-mips.c, coffcode.h:  Peter Schauer's patch to kludge in
        nonstandard MIPS sections (.rdata, .sdata, etc).

        * aoutx.h, bfd.c, coffcode.h, ieee.c, oasys.c, targets.c: CONST lint.
        * libbfd-in.h, libbfd.h, aoutx.h, coffcode.h, elf.c, libaout.h:
        Rename ALIGN to BFD_ALIGN to avoid conflict with BSD <sys/param.h>.
        * libbfd.c:  Lint.
        * host-aout.c, trad-core.c:  Fix write_armap prototypes.  Lint.

Thu Nov 21 19:56:40 1991  Per Bothner  (bothner at cygnus.com)

        * stab-syms.c, syms.c:  Moved bfd_stab_name() and bfd_stab_names[]
        from syms.c to new file stab-syms.c.  Also, since GNU extended
        type codes such as N_SETT are no longer in ../include/stab.def,
        include them manually.
        * stab-syms.c, aoutx.h: Renamed bfd_stab_name() and
        bfd_stab_names[] to aout_stab_name() and aout_stab_names[].
        * libaout.h: Added prototype for aout_stab_name().
        * Makefile.in:  Update Makefile for new stab-syms.[co].

Thu Nov 21 11:50:49 1991  John Gilmore  (gnu at cygnus.com)

        * libaout.h (WORK_OUT_FILE_POSITIONS):  One more try at this
        rather complicated seeming problem.  Eliminate LOGICAL_ versions,
        just make N_XXX work by excluding the header from the text segment.
        * aoutx.h:  Fix comments to match.

Tue Nov 19 18:49:01 1991  Per Bothner  (bothner at cygnus.com)

        * libaout.h (WORK_OUT_FILE_POSITIONS):  Use new LOGICAL_TXTADDR,
        LOGICAL_TXTOFF, LOGICAL_TXTSIZE macros to figure out numbers
        for the "logical" text segment (i.e. never consider the exec
        header to be part of the text segment).  This change is
        needed for consistency with various other parts of bfd and ld.
        * aoutx.h (NAME(aout,soe_aout_object_p)):  Fix comment,
        and move calculation of obj_textsec(abfd)->size to libaout.h.
        * bfd-in.h:  Removed bogus ';'.

        * Makefile.in:  Add MINIMIZE flag to select lean
        or bloated target_vector.
        * targets.c:  Use new MINIMIZE macro, and add trad_core if needed.
        * newsos3.c:  Fixes to ../include/aout64.h remove need
        for special N_TXTOFF macro, but require N_HEADER_IN_TEXT.

Mon Nov 18 12:00:59 1991  Per Bothner  (bothner at cygnus.com)

        * aout-target.h, aoutf1.h, newsos3.c:  Make aout-target.h
        handle both little and big-endian targets, with little
        the default unless TARGET_IS_BIG_ENDIAN_P is defined.
        * host-aout.c:  Add FIXME note.

Sun Nov 17 13:29:39 1991  Per Bothner  (bothner at cygnus.com)

        * targets.c:  Make the default target_vector contain
        just &DEFAULT_VECTOR.  This makes executables a lot smaller.
        Old behavior can be gotten by defining ALL_TARGETS.
        * aoutf1.h, demo64.c, i386aout.c, newsos3.c, sunos.c:
        Factored out common code into new file aout-target.h.
        Saves a lot of duplicate code for a.out variants.

Fri Nov 15 13:00:43 1991  Per Bothner  (bothner at cygnus.com)

        Get 'make headers' to work when configured with +subdirs.
        * Makefile.in: Add $(subdir) to docdir path.
        * doc/Makefile.in (protos): Add $(srcdir) prefix
        to name of sed scripts.

Thu Nov 14 19:49:10 1991  Per Bothner  (bothner at cygnus.com)

        * aoutx.h (NAME(aout,print_symbol)):  Fix thinko.
        * syms.c (bfd_stab_names):  Turn on new GNU_EXTRA_STABS macro
        to include names of N_SETT etc.

Thu Nov 14 19:11:13 1991  Fred Fish  (fnf at cygnus.com)

        * elf.c:  Add minimal support for ELF symbol tables.  Generates
        canonical bfd symbol tables from ELF symbol tables.  Change the
        name of some functions from bfd_<name> to elf_<name>.

        * syms.c:  Trivial fix to comment to remove a redundant "to".

Wed Nov 13 17:02:01 1991  John Gilmore  (gnu at cygnus.com)

        * coff-{i386,m68k,m88k}.c:  Change name of file format to standard
        form that GDB recognizes as COFF.

Wed Nov 13 09:09:41 1991  Steve Chamberlain  (sac at cygnus.com)

        * ieee.c (ieee_object_p):  cast NULL correctly.
        * configure.in: added harris host

        * coff-a29k.c: Lots of changes, most from David Wood.

Tue Nov 12 07:21:41 1991  John Gilmore  (gnu at cygnus.com)

        * coff-m88k.c (coff_write_armap):  Just #undef it.

Mon Nov 11 20:30:18 1991  Steve Chamberlain  (sac at cygnus.com)

        * Makefile.in: standardize on MINUS_G to disable debugging
        * coff-m88k.c: create coff armaps instead of bsd ones.
        * opncls.c (bfd_close_all_done), (bfd_close): Mask out random bits
        when calling chmod.

Mon Nov 11 19:07:32 1991  Fred Fish  (fnf at cygnus.com)

        * elf.c:  Additions to support ELF format core files.
        * config/mh-amix:  Add -DHAVE_PROCFS to HDEFINES, since host
        has support for /proc (all the include files in particular).

Mon Nov 11 18:36:47 1991  Per Bothner  (bothner at cygnus.com)

        * aoutx.h (NAME(aout,find_nearest_line)):  Handle the case
        of two N_SO stabs, one for directory, and one for filename.

        * bfd-in.h (print_vma):  Factor out duplicate definition.

        Exit a little more gracefully when malloc returns NULL.
        * libbfd.c: New function bfd_xmalloc (malloc wrapper).
        * opncls.c, syms.c, bout.c, aoutx.h:  Replace malloc by bfd_xmalloc.
        * libbfd.h: Rre-generated due to libbfd.c update.

Sat Nov  9 13:45:01 1991  Fred Fish  (fnf at cygnus.com)

        * config/mt-m68k-elf:  Define DEFAULT_VECTOR as elf_big_vec.

        * elf.c (elf_object_p):  Don't try to create a bfd section for
        the first ELF section header.  It is just a placeholder.

Sat Nov  9 03:04:26 1991  John Gilmore  (gnu at cygnus.com)

        * coff-rs6000.c, config/mh-rs6000:  Make it work on archive and
        core files, when compiling native.
        * hosts/h-rs6000.h:  Define FASCIST_FDOPEN for bfd_fdopenr.

        FIXME:  The aoutf1.h change below needs to be reversed back
        to the way it was.

Thu Nov  7 11:03:55 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * coffcode.h: Defined new macros [PUT|GET]LINENO_LNNO for
        manipulation of lnno fields in lineno structs in a coff-<f>.h
        independent way. Override it in coff-<f>.h to your favourite
        number if you don't have a 16bit lnno field. (coff_swap_lineno_in)
        (coff_swap_lineno_out): modified to use the new macros.

Mon Nov  4 11:38:33 1991  Steve Chamberlain  (sac at cygnus.com)

        * aoutf1.h (sunos4_callback): Now defaults to 68020 rather than
        unknown arch when the magic number doesn't specify the
        architecture, since some OSs (eg old sun3s) don't set the number, and
        020 is probably the right answer anyway.

Sun Nov  3 12:07:08 1991  Per Bothner  (bothner at cygnus.com)

        * hosts/h-news.h, hosts/h-rtbsd.h:
        Get rid of MISSING_VFPRINTF, since libiberty provides one.
        * bfd-in.h (bfd_print_symbol_type_hopw enum):   Add new option
        bfd_print_symbol_nm, for use by nm.
        * aoutx.h (NAME(aout,print_symbol)):  Add code for new
        bfd_print_symbol_nm option, to print in nm format.
        * coffcode.h (coff_print_symbol), ieee.c (ieee_print_symbol)
        oasys.c (oasys_print_symbol):  Provide stub implementations
        for bfd_print_symbol_nm.
        * syms.c:  New function bfd_decode_symclass, used by nm printer.
        New function bfd_stab_name to look up string name of stab code.

Sat Nov  2 14:26:03 1991  Steve Chamberlain  (steve at cygnus.com)

        * Makefile.in: Added ctor.c 
        * archures.c (bfd_default_arch_struct) added
        bfd_default_reloc_type_lookup.
        * coffcode.h: removed a load of #if 0ed code.
        (coff_compute_file_section_positions): now works out the section
        alignment and size correctly in all cases.
        (coff_get_symtab): looks for constructor symbols and calls the
        right function when they're found. (coff_canonicalize_reloc):
        knows when a section is full of constructors and does the right
        thing. 
        * cpu-m88k.c: Added default_reloc_type lookup to the architecture
        description.
        * libbfd-in.h: (bfd_default_reloc_type_lookup) defun  added.
        * libcoff.h: removed #if 0ed code
        * reloc.c: (bfd_reloc_code_real_type) added BFD_RELOC_CTOR for
        arch independent constructor relocation type.
        (bfd_reloc_type_lookup): removed the comment "this will go away"
        since it won't. (bfd_howto_32): stolen from 88k, this is a 32bit
        reloc which is used when BFD_RELOC_CTOR falls through to give a
        default 32bit reloc for constructors.
        (bfd_default_reloc_type_lookup): added.
        * aoutf1.h: fixed SEGMENT_SIZE typo.

Thu Oct 31 18:23:06 1991  John Gilmore  (gnu at cygnus.com)

        * coff-rs6000.c:  Change name to "aixcoff-rs6000", to avoid
        matching prefix "coff".
        * coffcode.h (coff_swap_aux_in, coff_swap_aux_out):  Handle
        rs/6000 csect records.

Sun Oct 27 16:56:58 1991  Steve Chamberlain  (steve at cygnus.com)

        * coff-m88k.c, targets.c: change name of m88k_bcs to m88kbcs
        * configure.in: add motorola delta88 cases
        * libbfd.h, libbfd-in.h, archive.c, ieee.c, elf.c, srec.c: fix
        write_armap prototype
        * libbfd.c: add doc on bfd_write_bigendian_4byte_int

Fri Oct 25 02:48:19 1991  John Gilmore  (gnu at cygnus.com)

        * Rename COFF-related files in `coff-ARCH.c' form.
        coff-a29k.c, coff-i386.c, coff-i960.c, coff-m68k.c, coff-m88k.c,
        coff-mips.c, coff-rs6000.c to be exact.

        * Makefile.in:  Only supply TARGET_DEFAULTS to targets.c, reducing
        make output clutter.
        * config/mt-*:  Ditto.

Thu Oct 24 22:40:07 1991  John Gilmore  (gnu at cygnus.com)

        RS/6000 support, by Metin G. Ozisik, Mimi Phûông-Thåo Võ, and
        John Gilmore.  Archive support from Damon A. Permezel.

        * Makefile.in:  Add cpu-rs6000.c and rs6000coff.c.
        * configure.in:  Add rs6000 case.
        * targets.c:  Add rs6000 vector.
        * archures.c:  Add rs6000, fix comment on romp.
        * bfd-in.h (enum bfd_error):  Add no_debug_section error.
        * libcoff-in.h (struct coff_tdata):  Remove unused string_table.
        * bfd.c (bfd_errmsgs):  Add no_debug_section error message.
        * section.c (bfd_make_section):  Return NULL on attempt to create
        a section twice.
        * coffcode.h (bfd_swap_reloc_in):  Handle r_type and r_size.
        (bfd_swap_aouthdr_in):  Handle lots more members.
        (make_a_section_from_file):  If section has already been seen,
        just return false rather than overwriting it.
        (coff_real_object_p):  Understand incoming magic numbers.
        (coff_set_flags):  Understand outgoing magic numbers.
        (coff_compute_section_file_positions):  outgoing aouthdr magic #.
        (build_debug_section):  Add fn for reading debug string section.
        (get_normalized_symtab):  Handle symbol names in debug string section.
        Remove unused obj_string_table.
        (coff_slurp_symbol_table):  Handle rs6000-specific storage classes.
        * aoutx.h (translate_from_native_sym_flags, N_SET*):  Check for
        existing section before making one.
        * cpu-rs6000.c:  New file.
        * rs6000coff.c:  New file.

Thu Oct 24 02:03:24 1991  Fred Fish  (fnf at cygnus.com)

        * elf.c: Add partial support for ELF format corefiles. Still needs
        support for extracting registers from corefiles.

        * config/t-m68k-elf:  Set DEFAULT_VECTOR to elf_big_vec.

        * config/{h-amix,h-dgux,h-irix3,h-ultra3}: For systems where
        RANLIB is defined as echo, send the output to /dev/null to help
        reduce clutter in the output from doing a make.

Mon Oct 21 17:48:48 1991  John Gilmore  (gnu at cygnus.com)

        * hosts/h-vaxult.h:  Remove malloc/free decls covered in stdlib.h.
        Fix HOST_PAGE_SIZE and HOST_SEGMENT_SIZE.  From David Taylor.

Mon Oct 21 09:34:11 1991  Steve Chamberlain  (steve at rtl.cygnus.com)

        * coffcode.h (coff_compute_section_file_positions): make it pad
        section size out if there are alignment restrictions so that the
        image will be ok on a system where section positions are worked
        out by accumulating sizes rather than from the section headers.
        * targets.c (proto write_armap). Changed orl_count to unsigned.
        * opncls.c (bfd_close_all_done). Added so that generative
        programs like gas can close a bfd without causing bfd confusion.
        * libbfd.h (changed becuase of protos)
        * amdcoff.c: messed with the way that jmp displacements are
        calcualated. This may not yet be totally correct.
        * archive.c (coff_write_armap): rewrote the way that ranlibs are
        written out.
        * coffcode.h (fixup_symbol_value): now doesn't core dump if a non
        abs symbol has no section (like a register symbol).
        (coff_write_symbol) now zeros auxent before filling it up to help
        with sensitive applications.
        * libbfd.c (bfd_write_bigendian_4byte_int): added.
        
Wed Oct 16 22:58:45 1991  John Gilmore  (gnu at cygnus.com)

        * bfd.c:  Make sure we don't get a macro strerror().
        * opncls.c (bfd_fdopenr):  If FASCIST_FDOPEN, use "r", not "r+".
        * trad-core.c (trad_unix_core_file_failing_command):  Suppress
        attempt to recover command, ifdef NO_CORE_COMMAND.
        * hosts/h-tahoe.h:  Add FASCIST_FDOPEN and NO_CORE_COMMAND;
        revamp HOST_*, etc.
        * hosts/h-i386v.h:  Use <utime.h>, not <sys/utime.h>, unlike POSIX.

Wed Oct 16 12:43:49 1991  Per Bothner  (bothner at cygnus.com)

        * archive.c (bsd_write_argmap): The size of the ranlib structures
        should not include the size field itself.
        * aoutx.h, libaout.h (NAME(aout, sizeof_headers)):  Use
        adata(abfd)->exec_bytes_size field instead of constant macro,
        because aoutx.h compiles to a simple .o file shared by
        all 32-bits a.out targets.

Wed Oct 16 11:11:05 1991  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Allow i386-sco-sysv.
        * bout.c:  Remove unused i960_align; lint dummy core file handlers.
        * cpu-h8300.c:  lint.

        * host-aout.c:  New strategy.  We use common code, include files,
        and data structures to handle the file, but set a few parameters
        from the host's config file (page size, text start addr, etc).
        * libaout.h:  Define HP BSD machine types.
        * aoutf1.h:  Handle reading a.outs with these types.

        * trad-core.c:  Pass the u.u_ar0 value as the negative of the
        virtual-memory-address of the .reg section.  We can't just make a
        section for "all the regs and nothing else" because only GDB knows
        exactly where the regs are (scattered around the upage and stack).
        Clean up memory allocation.  Remove big- and little-endian
        vectors, replace with single vector; this only runs on the host,
        in host byte order.  Replace byteswap routines with aborts in case
        anyone calls them.
        * targets.c:  There's only one trad_core_vec now.
        * aoutf1.h (sunos_core_file_p):  VMA of .reg* now needs to be 0.

Tue Oct 15 08:29:03 1991  John Gilmore  (gnu at cygnus.com)

        * hosts/h-amix.h (free):  Fix prototype.

        * aoutx.h:  Don't use NULL as an integer, for braindead systems
        that declare it as (void *)0.  (From Peter Schauer.)

Mon Oct 14 17:20:47 1991  Per Bothner  (bothner at cygnus.com)

        * opncls.c (bfd_fdopenr):  Add parentheses to avoid reported
        problem with bad Ultrix system headers.
        * aoutx.h (NAME(aout,set_section_contents)):  Try to handle the
        various kinds of alignments for the various kinds of
        magic numbers.

Mon Oct 14 14:23:10 1991  John Gilmore  (gnu at cygnus.com)

        * doc/Makefile:  Don't assume . is on the path (from James Clark).

Fri Oct 11 22:45:14 1991  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Avoid Sun Make VPATH bugs.
        * targets.c:  Declare trad_core vectors extern.

Fri Oct 11 13:03:02 1991  Per Bothner  (bothner at cygnus.com)

        * coffcode.h: Moved ALIGN macro to libbfd.h. Removed i960_align.
        * libbfd.h: Moved ALIGN macro here.
        * bout.c (b_out_callback): Replace i960_align by align_power.

        * libaout.h (struct aoutdata):  Added fields page_size,
        segment_size and exec_bytes_size.  These help generic code
        (in aoutx.h and libaout.h) to figure out where to align
        the various segments in a demand paged file.
        * libaout.h (WRITE_HEADER):  Use new (struct aoutdata) fields
        to decide if the exec header counts in a_text (text segment size).
        Also, assume D_PAGED flag is set; don't set it here.
        * bout.c (b_out_callback): Add initialization of
        adata fields page_size, segment_size, and exec_bytes_size.
        * host-aout.c (NAME(host_aout, callback) and
        NAME(host_aout,mkobject): Ditto.
        * i386aout.c (aout386_callback) and new aout386_mkobject): Ditto.
        * newos3.c (newsos3_callback) and new newsos_mkobject): Ditto.
        * aoutf1.c (sunos4_callback) and new sunos_mkobject): Ditto.
        * aoutx.h (NAME(aout,some_aout_object_p)): Don't subtract
        EXEC_BYTES_SIZE from the a_test size; this is only appropriate
        for some systems (mainly sunos), so do it in the callback instead.
        Same routine: Add stuff to the THIS_IS_ONLY_DOCUMENTATION comment.
        * aoutx.h (NAME(aout,set_section_contents): Change the way
        filepos and size of sections are carried out to support
        older styles of demand paged executables.
        

Fri Oct 11 12:33:36 1991  Steve Chamberlain  (steve at cygnus.com)

        * bfd-in.h: Added more macros to COFF_SWAP_TABLE.
        * bfd.c: Added macros to enable gas to swap coff records.
        * coffcode.h: Make the coff_swap_*_out routines return the number
        of bytes swapped, and cleaned up their prototypes.
        * configure.in: Added ebmon/coff support
        * ecoff.c: Changed null definitions of coff_swap_*_out to conform
        to new prototypes
        * targets.c: Added new entry points for coff swapping

Fri Oct 11 03:01:52 1991  John Gilmore  (gnu at cygnus.com)

        Restructure configuration scheme for bfd, binutils, ld.

        * include/sys/h-*.h:  Move to bfd/hosts/h-*.h.
        * configure.in:  Revise to symlink sysdep.h to hosts/h-xxx.h.
        Change some config names to match other dirs.
        * *.c:  Include bfd.h before sysdep.h, so ansidecl and PROTO()
        get defined first.
        * Makefile.in:  Use -I. to get sysdep.h.  Remove refs to
        ../include/sysdep.h.
        * cpu-i960.c:  Strncmp needed a length arg.
        * ecoff.c:  Don't ever call trad_unix_core_file_p from here.
        * i386aout.c:  Remove dead N_TXTOFF override.
        * trad-core.c:  Don't disable the whole file if SUN4_SYS.
        * config/:  Rename some config files to match up h-*.h names.
        Remove all the HOST_SYS definitions from the config files.
        * hosts/h-amix.h, h-i386v.h:  Define POSIX_UTIME, not USG.
        * hosts/h-hp9000.h:  Remove USG comment.
        * hosts/h-rs6000.h:  Include <stdlib.h> for malloc.
        * hosts/h-news.h, h-sparc-64.h:  New config files that had
        previously been kludged in the <sysdep.h> file.

Thu Oct 10 17:54:08 1991  John Gilmore  (gnu at cygnus.com)

        * config/*:  trad-core support is HOST dependent, not target
        dependent.  Target config files only set DEFAULT_VECTOR and/or
        other vector elements.  Exception:  when host-aout.c is in use,
        in which case we're forced to assume we're native (hp, vax,
        tahoe).  Rename XDEPFILES to HDEPFILES.
        * Makefile.in:  Rename XDEPFILES.
        * config/h-sun*:  Don't force static linking.
        * trad-core.c:  Document how to use it nowadays.
        * i386aout.c, newsos3.c:  Clean up.
        * i386coff.c:  Allow 386 coff files to be used as core files too
        (for reading core files from embedded systems).

Tue Oct  8 15:30:39 1991  John Gilmore  (gnu at cygnus.com)

        * Add i386aout.c for a.out support on the i386.

Tue Oct  8 12:18:54 1991  Roland H. Pesch  (pesch at cygnus.com)

        * reloc.c, section.c, syms.c, targets.c: correct info-node
        structure in *doc* comments.
        doc/Makefile: stop hiding complaints from makeinfo.

Sun Oct  6 19:10:06 1991  John Gilmore  (gnu at cygnus.com)

        * aoutx.h (...some_aout_object_p):  Take a third parameter,
        the internal_exec struct, and avoid ever looking at an
        external_exec.  All callers changed to read the entire
        external_exec struct, swap and check its magic number, 
        swap in the whole structure, and pass the swapped-in version to
        some_aout_object_p.
        * bout.c:  Bring into modern era.  Use single _object_p routine
        for big- aand little-endian.  Provide internal and external
        exec header structs.  Use separate swap-in and swap-out routines.

        * libaout.h:  Move struct internal_exec from ../include/aout64.h
        to here.  Add obj_symbol_entry_size to struct aoutdata.
        * aoutx.h (...some_aout_object_p):  Set obj_symbol_entry_size.

        * ../include/aout64.h:  Change EXTERNAL_LIST_SIZE to
        EXTERNAL_NLIST_SIZE.  Callers changed.
        
Fri Oct  4 18:18:46 1991  John Gilmore  (gnu at cygnus.com)

        * bfd.c:  Remove strerror() to libiberty.

        * elf.c:  Remove elf_set_section_contents, use generic one.  Lint.
        * libbfd-in.h, libbfd.c:  Add bfd_generic_set_section_contents.
        * libbfd.c (bfd_generic_{get,set}_section_contents):  Check that
        last byte of transfer, not first byte, is within the section.

        * host-aout.c:  Remove `BSD' archive support.  Lint.

        * archures.c: Rename `struct bfd_arch_info_struct' to `struct
        bfd_arch_info'.  Rename `typedef bfd_arch_info_struct_type' to
        `bfd_arch_info_type'.  All uses changed.
        * reloc.c:  Rename `bfd_reloc_status_enum_type' to
        `bfd_reloc_status_type'.  Rename `bfd_reloc_code_enum_real_type'
        to `bfd_reloc_code_real_type'.  (This seems to be a misnomer,
        it needs a better name.)  All uses changed.
        * targets.c:  Rename `enum target_flavour_enum' to `enum
        target_flavour', and remove the `_enum' from all of the enum
        values themselves.  All uses changed.

        * configure.in, config/h-i386mach:  i386 mach host.
        * config/t-i386-aout:  Use host-aout.c.

        * trad-core.c:  Give it its own xvec's to make it independent
        of other file formats.
        * ecoff.c, host-aout.c:  Remove refs to trad-core.
        * config/t-dec3100, t-hp300bsd, t-tahoe, t-vax:  Define TRAD_CORE.
        * targets.c:  #ifdef TRAD_CORE, include it in the vector.

Fri Oct  4 17:38:03 1991  Steve Chamberlain  (steve at cygnus.com)

        * reloc.c: Extended NEWHOWTO macro
        * ieee.c: Changed the way 8bit pcrel is done
        * cpu-h8300.c: got the registers in the right order

Thu Oct  3 19:39:55 1991  John Gilmore  (gnu at cygnus.com)

        * bfd-in.h:  enum boolean => enum bfd_boolean for SVR4.  Gumby's
        prediction is vindicated!

        * bfd-in.h, libbfd-in.h, doc/Makefile, doc/tolibbfd, doc/intobfd:
        Remove refs to howto.c, since Steve forgot.

Thu Oct  3 07:49:21 1991  Steve Chamberlain  (steve at cygnus.com)

        * elf.c: took the abort out of set_arch_mach so that objdump -i will
        still work. Now allows any architecture/machine to be set.

Wed Oct  2 13:50:35 1991  Steve Chamberlain  (steve at cygnus.com)

        * howto.c deleted and moved code to reloc.c

        * libbfd.h, libbfd-in.h removed $id stuff for real

        * cpu-h8300.c Made it match various different spellings of h8300.

        * archures.c: Took out the first char filter which made it only
        look for a cpu/arch match when the first chars of supplied and
        tested names were the same.
        
        * targets.c removed oasys stuff, pending someone to fix the bugs
        in it.


Tue Oct  1 12:29:44 1991  John Gilmore  (gnu at cygnus.com)

        * Makefile.in, configure.in, targets.c, elf.c:  Add preliminary
        ELF support good enough for GDB.
        * configure.in, config/h-amix, config/t-m68k-elf:  Handle
        m68k-cbm-svr4 host and target.
        * config/t-m68k-coff, t-m88k-coff, t-m88k-aout:  Make files nonempty
        so `diff' and `patch' can cope.

Tue Oct  1 11:24:31 1991  Steve Chamberlain  (steve at cygnus.com)

        * archures.c: removed texinfo error

        * init.c: added texinfo hooks, and removed initialization error
        message.

        * libcoff-in.h, libbfd-in.h removed $id field so cvs can merge
        without complaints.

Tue Oct  1 05:02:53 1991  John Gilmore  (gnu at cygnus.com)

        * cpu-i960.c:  Avoid numerical count of initializers.

        Vax Ultrix changes from David Taylor <taylor@think.com>:
        * host-aout.c:  Make little-endian vector really little-endian.
        * configure.in:  Separate vax and tahoe cases, handle ultrix.
        * config/t-vax:  Add trad-core.o.
        * config/h-vaxult:  New host system.

Mon Sep 30 15:13:46 1991  Steve Chamberlain  (steve at cygnus.com)

        * bfd-in.h VERSION, change version number to 0.18, this makes a
        gap, but now is the same as the linker version number.

        * cpu-a29k.c, cpu-i386.c, cpu-m68k.c, cpu-mips.c, cpu-vax.c,
        cpu-h8300.c, cpu-i960.c, cpu-m88k.c, cpu-sparc.c: added. These
        files will eventually contain processor specific bits for bfd,
        like strange relocation information and dis/assembly.  So far only
        the H8 has been even partially done.  This work also ties in with
        the change in handling architectures.

        * amdcoff.c: (a29k_reloc) fix error message.

        * aout-f1.h: (choose_reloc_size) now calls bfd_get_arch to
        discover the architecture of the bfd. (sunos4_callback) calls the
        function bfd_set_arch_mach rather than stuffing stuff directly
        into the bfd. (sunos4_write_object_contents), changed names of
        accessor functions.

        * aoutx.h: (set_arch_mach) now calls bfd_default_set_arch_mach to
        setup the environment.

        * archive.c: (bfd_slurp_coff_armap) coff archives always have the
        headers in big endian format, regardless of the endianess of the
        host or target.

        * archures.c: totally changed. Now an architecture is represented
        with a pointer to an info structure rather than an enumerated type
        and a long. The old info is available as two elements in the
        structure.  Future enhancements to architecure support will
        involve pointers to methods being placed into the info structure.

        * bfd.c: changed the definition of the bfd structure for the new
        architecture stuff.

        * bout.c: (b_out_set_arch_mach) changed to use the new
        architecture mechanism.

        * coffcode.h: (coff_set_arch_mach, coff_set_flags) changed to use
        the new architecture mechanism.

        * configure.in: added h8 stuff.

        * ieee.c: too many changes to note.  Now ieee files written with
        bfd gas and ld can be read by gld and ieee only linkers and
        simulators.

        * libbfd.c, libbfd.h: changed prototype of bfd_write.
        
        * newsos3.c: (newos3_callback) now calls bfd_set_arch_mach rather
        than fixing the structure directly.

        * oasys.c: (oasys_object_p) now calls bfd_default_set_arch_mach rather
        than fixing the structure directly.

        * opncls.c: (new_bfd) makes sure that bfd_init has been called
        before opening a bfd.

        * srec.c: (srec_set_arch_mach) now calls bfd_default_set_arch_mach
        rather than fixing the structure directly.

        * targets.c: (target_vector) now by defining SELECT_VECS (perhaps
        in the t/hmake file) a user can select which backends they want
        linked with bfd without changing the source.

        * init.c: new, looks after initializing modules.

        * howto.c: for future use, will allow an application to work out
        what cookie to use as a handle on a relcoatio howto.
        
Mon Sep 30 13:31:15 1991  John Gilmore  (gnu at cygnus.com)

        * srec.c:  Better error checking, partly from Peter Schauer.
        (srec_object_p):  Avoid assuming any file that starts with 'S' is
        an S-record file!  (Check for 3 uppercase-hex digits after it.)
        (ISHEX):  Define new macro for checking supposedly hex characters.
        (pass_over):  Treat as EOF any S-record line that:
            *  doesn't have hex in either size character
            *  produces a size larger than 0x7F
            *  has an unrecognized type number

Thu Sep 26 15:27:29 1991  John Gilmore  (gnu at cygnus.com)

        * aoutf1.h, aoutx.h, bout.c, coffcode.h, host-aout.c, oasys.c,
        opncls.c:  Lint (saber actually).

Thu Sep 26 11:24:24 1991  Per Bothner  (bothner at cygnus.com)

        * libaout.h (WRITE_HEADERS): Set header's a_text field always.
        * newsos3.c: Fixed two types: newos3 -> newsos3.
        * reloc.c (bfd_perform_relocation): Fix pc-relative relocation
        to use correct segment.

Mon Sep 23 18:24:34 1991  Per Bothner  (bothner at cygnus.com)

        * aoutx.h (print_symbol):  Handle missing symbol->name.

Fri Sep 20 12:26:01 1991  Stu Grossman  (grossman at cygnus.com)

        * aoutf1.h (swapcore_sparc):  Change name of USRSTACK, fix comment
        at top of routine.

Tue Sep 17 17:23:49 1991  Stu Grossman  (grossman at cygnus.com)

        * oasys.c, configure.in, config/h-irix3, config/t-irix3:
        add sgi/irix support.

Thu Sep 12 14:29:09 1991  John Gilmore  (gnu at cygint.cygnus.com)

        Changes for the AMD 29000 Ultracomputer port from David Wood.
        (wood@nyu.edu).

        * opncls.c (bfd_fdopenr):  Handle NO_FCNTL.

        * Makefile.in:  Make subdirs work by using $(INCDIR) in the
        crude dependencies.

        * coffcode.h (coff_real_object_p):  Pass information about the
        current file's coff symbol format to BFD via the coff_data struct.
        (coff_find_nearest_line):  obj_icof => coff_data.
        (coff_swap_sym_{in,out}):  Check that SYMNMLEN == E_SYMNMLEN.
        (coff_swap_aux_{in,out}):  Check that FILNMLEN == E_FILNMLEN
        and DIMNUM == E_DIMNUM.
        * configure.in:  Handle a29k-*-* hosts, and targets 
        a29k-*-coff, a29k-*-aout, and a29k-*-sym1.
        * libcoff-in.h:  Add local_n_btmask, local_n_btshft,
        local_n_tmask, local_n_tshift, local_symesz, local_auxesz,
        local_linesz to `coff_data' (tdata) struct.     
        (coff_data, coff_data_type, coff_tdata):  Rename struct icofdata.
        * config/h-ultra3:  Handle a29k-*-* hosts as Ultracomputers.

Thu Sep 12 14:07:22 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)

        * Makefile.in: $(MAKE) for make, $(docdir) for doc
        * doc/Makefile: redundant dependencies for Sun-make VPATH bug

Tue Sep 10 20:34:12 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * aoutf1.h (sunos4_core_file_p):  Release the right storage in
        error case.
        (sunos4_core_file_matches_executable_p):  Fix header comparison.
        * aoutx.h:  Avoid shifts of 32 bits, undefined in C.  Lint.
        * bout.c, icoff.c, ieee.c, libbfd.c, oasys.c:  gcc -O -W lint.

Wed Sep  4 00:44:52 1991  John Gilmore  (gnu at cygint.cygnus.com)

        Allow GDB to patch object files.

        * aoutf1.h (sunos_core_file_p):  Set SEC_HAS_CONTENTS on all sections.
        * trad-core.h (trad_unix_core_file_p):  Ditto.
        * aoutx.h (aout_set_section_contents):  On first output, check
        abfd->direction and complain if erroneous.

        * Makefile.in:  Add crude dependencies.

Tue Sep  3 13:46:19 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * config/* aoutx.h configure* shortened all the h/tmake-xxxx
        to h/t-xxxx files so that everything will work on System V.

Fri Aug 23 13:51:06 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * aoutx.h:  Add information on host-aout.c and how to configure
        to use it, to the manual.
        * configure.in:  Tix typo.
        * ecoff.c:  If compiling for DEC3100, use trad_unix core files,
        else dummy out the core file support.
        * trad-core.c (trad_unix_core_file_p):  If HOST_DATA_START_ADDR is
        specified, use it to locate the data section.
        * coffcode.h (coff_write_symbols):  Declare buffer as bfd_bytes
        rather than as chars (lint).

Thu Aug 22 22:20:19 1991  Stu Grossman  (grossman at cygint.cygnus.com)

        * aoutx.h, coffcode.h:  saberized.

Thu Aug 22 11:27:06 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)

        * bfd.texinfo: some cleanup, reincorporated more intro matter from
        bfd.doc 
        bfd.c, targets.c: minor rewording of doc segments


Wed Aug 21 19:13:22 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * trad-core.c (trad_unix_core_file_p):  Use HOST_TEXT_START_ADDR,
        etc, rather than TEXT_START_ADDR.
        * host-aout.c:  Remove #if 0 around whole thing.
        Update to modern (32/64-bit) a.out naming conventions.
        Include a large chunk of ../include/a.out.gnu.h to get macros that
        are not defined by the system include files.
        (host_aout_{32,64}_write_object_contents):  Use the WRITE_HEADERS
        macro used by the other a.out implementations.
        * Makefile.in:  Give dependencies to OPTIONAL_BACKENDS.

Wed Aug 21 14:33:06 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)

        * Makefile.in: use targets "bfd.dvi" and "bfd.ps" instead of
        texdoc and psdoc; make these depend on generated .texi's
        
        * scanit, (new) unPROTO: turn PROTO macros into ANSI declarations in
        doc
        
        * bfd.c, reloc.c, syms.c: minor spelling/wording fixes in doc
        portions         

        * Makefile.in, awkscan-ip, awkscan-p, intobfd,
        libbfd.h, libcoff.h, tolibcoff; new bfd-in.h, libbfd-in.h,
        libcoff-in.h: (a) use separate files for invariant parts of bfd.h,
        libbfd.h, and libcoff.h; (b) in generated parts of same, use less
        obtrusive marks indicating .c origins.

        * bfd.texinfo: generalize most references to linker

Tue Aug 20 15:18:02 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)

        * Makefile.in: include core.p in PROTOS (building better bfd.h)
        * archures.c: remove empty foo() definition (crept in at vn1.9)

Mon Aug 19 13:48:22 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)

        * bfd.texinfo: use @setchapternewpage on instead of lots of
        @page's; minor rephrasing in Introduction.

        * aoutx.h, archive.c, archures.c, bfd.c, bfd.texinfo, cache.c,
        coffcode.h, core.c, format.c, ieee.c, libbfd.c, libbfd.h, libcoff.h,
        oasys.c, opncls.c, reloc.c, section.c, syms.c, targets.c (documentation
        segments): used BFD (caps) more consistently as a name in
        discourse, fixed a few other minor typos and uses of fonts
        

Thu Aug  8 16:47:43 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * coffcode.h: fixed bug where string table size wasn't being swapped.

Thu Aug  1 16:35:28 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * section.c: added SEC_CONSTRUCTOR_TEXT|DATA|BSS flags

        * syms.c: added BSF_CONSTRUCTOR, BSF_WARNING and BSF_INDIRECT
        flags. (bfd_print_symbol_vandf) now knows what to do with the
        above flags.

        * aoutx.h: made translate_from_native_sym_flags and
        translate_to_native_sym_flags produce the above flags.
                

Wed Jul 31 09:53:52 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * all files:  update copyright notices for GPL version 2.
        Install header comments and attribute most modules to their
        authors.  BFD's name is now officially "Binary File Descriptor",
        so remove any conflicting pejoratives.
        archures.h:  Consists solely of comments; remove it.

Fri Jul 26 18:11:34 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * Makefile.in, bfd.c: Made it compile again.

Fri Jul 19 08:17:09 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * newsos3.c, targets.c, coffcode.h: new patches from David Wood


Mon Jul 15 16:27:42 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * aoutf1.h archive.c bfd.c coffcode.h core.c ecoff.c ieee.c
        bfd.texinfo oasys.c opncls.c reloc.c srec.c: More documentation on
        lint fixes.

        * amdcoff.c bfd.texinfo Makefile.in : Folded in changes for amd
        29k coff by David Wood (wood@lab.ultra.nyu.edu).

Thu Jul  4 09:53:16 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * Everything: created some new files, core.c format.c, reloc.c,
        section.c and syms.c to split the functionality a bit better.
        Cleaned up the rest of the files a bit, and added some
        documentation.


Mon Jul  1 13:29:47 1991  David Wood (wood at david.ultra.nya.edu)

        * opncls.c, ../include/sys/h-sun3.h ../include/sys/h-sun4.h: fcntl
        really takes 3 arguments, patched code and ammended prototypes.

Fri Jun 14 13:19:40 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * ../include/bfd.h (struct bfd_target): Added new field
        "align_power_min" which contains the minimum alignment for a
        section. This is used in coff_new_section_hook. The field
        insertion necessitates an update of all backends..

        * aoutf1.h jump table field inserted
        
        * archive.c(snarf_ar_hdr)(bfd_slurp_coff_armap) can now parse dgux style extended
        filenames too.

        * bout.c(b_out_squirt_out_relocs) fix to assertion tests. Jump
        table field inserted.
        
        * coffcode.h(just about everything) Now patches up symbol tables
        using a different mechanism. The Intel major bug has been fixed,
        and the linker can self host on the Aviion and be debugged with
        gdb.

        * ecoff.c: new include and jump table patch, i386coff.c: new
        include and jump table patch,  icoff.c: new include and jump table
        patch, ieee.c: can now read archives containing ieee modules.,
        libcoff.h: added (combined_entry_type), libieee.h: uped max
        sections to 20, m68kcoff.c: new include and jump table patch,
        m88kbcs.c: new include and jump table patch, oasys.c: various bugs
        fixed. opncls.c: added bfd_alloc_grow and bfd_alloc_finish.
        srec.c: jump table patch. trad-code.c fixed #IF typeo

Fri Jun  7 12:35:46 1991  Sean Fagan  (sef at cygint.cygnus.com)
 
        * coffcode.h (coff_swap_aux_in): added else case to deal with
        filenames less than 9 characters.
 

Thu Jun  6 18:27:38 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * ../include/oasys.h oasys.c (oasys_archive_p): fixed so it works
        
        * srec.c: now allows any number of sections to be created in a
        file. Outputs addresses of the right length.

Thu May 30 15:30:10 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * bfd.c (bfd_check_format): Fixed problem where when a defaulted
        target didn't match, the format got set to the attempted match,
        breaking a future test.

        *../include/i386coff.h : fixed typo in type field with size

        * i386coff.c icoff.c m88k-bcs.c ecoff.c ../include/bfd.h : Added
        support in the jump table for the swapping routines exported to
        gdb. Now gdb works with the 386.

Tue May 28 17:21:43 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * Merge in changes from gdb-3.95 release.
        Makefile.in:  Allow hmake and tmake files to add OFILES.
        aoutf1.h:  
        bfd.c:  support specific targets as well as searching.  When
        searching, take default target in preference to others.
        bfd.doc:  typos
        ieee.c, oasys.c:  Avoid using the "tdata" macros left of assignment.
        liba.out.h:  Don't hard-code file offsets; use N_ macros for them.
        libbfd.h:  Support specific targets as well as searching.
        opncls.c:  Support specific targets as well as searching.
        targets.c:  Search is short-circuited if default target matches.
        liboasys.c, libieee.c:  Undo bothner changes that make macros
        work to the left of assignment, but which depend on the
        representations of different pointer types being the same.

Fri May 24 18:56:52 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * i386coff.c: created.
        * coffcode.h: added support for 386. 
        * Makefile.in: added support for 386. 
        * ../include/i386coff.h: created

Wed May 22 07:26:38 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * coffcode.h: removed all put_x_<sizes>
        * libbfd.c: Changed #ifdef __GNUC__ to #ifdef HOST_64_BIT, Added
        DEFUNS 


Tue May 21 08:58:58 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
        (bothner)
        * opncls.c: Changed obstack_chunk_alloc use xmalloc

Mon May 20 17:12:17 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * everything: Removed sysdep.h from bfd.h and put back into files
        from which it was split out. Now 64 bit version is built with a
        -DHOST_64_BIT="long long" on the compile line.

Fri May 17 19:35:26 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        Changed all the [get|put][name] routines to use  [get|put]_[size
        in bytes].  

        Put in support for 64 bit work. Now two versions of bfd may be
        generated, according to the state of TARGET_64_BIT, one which is
        32 bit only, and one which is 64/32 bits. 
        Created new back end 'demo64' to test 64 bit functionality.

        Renamed some files to work on DOS.

        * archive.c: lint * bfd.c: prototypes and lint. * ecoff.c: added
        64bit transfer  * icoff.c: added 64bit transfer * ieee.c: name
        chage, 64 bit transfer. * liba.out.h: Split out common code from
        sunos and newsos into liba.out. Name changes and prototype mods. *
        libbfd.c: lint and prototypes, extra 64bit swaps. * libbfd.h:
        prototypes for new functions. * libcoff.h: lint * libieee.h: make
        work on DOS * liboasys.h: make work on DOS * m88k-bcs.c: Name
        change and 64bit stuff.* newsos3.c: common code removed, new jump
        table. * oasys.c: Name change * opncls.c: Portability fixes *
        srec.c: Name changes * sunos.c: Removed comon code. * targets.c:
        Added demo * aout32, aout64.c include  aoutx.h * bout.c: used to
        be called b.out.c * coffcode.h: used to be called coff-code.h, now
        64bit ized. * demo64.c: 64 bit a.out back end

Thu May 16 16:02:07 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
        from bothner
        * libieee.h: Make ieee_data and ieee_ar_data macros usable
        on LHS of assignment, even when using old compilers.
        * liboasys.h: Ditto for oasys_data and oasys_ar_data.
        * m68kcoff.c: Add enum-to-int casts to accomodate old compilers.
        * newsos3.c: Fix definitions of SEGMENT_SIZE and TEXT_START_ADDR.
        * opncls.c: Define S_IXUSR, S_IXGRP, S_IXOTH if undefined.
        * targets.c: Add declaration of newsos3_vec.

Mon May 13 10:03:29 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * aout.c: fixxed some of the problems with filepos calculation.
        (swap_ext_reloc): fixed problem with creation of relocs.
        (aout_set_section_contents): fixed filepos problem

        * coff-code.h: (swap_filehdr_in, swap_filehdr_out) add.
        (swap_filehdr) delete. Changed all the usage of bfd_h_put_x.
        (swap_aouthdr_in, swap_aouthdr_out) add. (swap_aouthdr) delete.
        (coff_real_object_p) cleaned up, added MIPS. (coff_object_p)
        cleaned up. (coff_write_object_contents) cleaned up. 

        * ecoff.c: Totally different. Now supports ecoff fully.

        * icoff.c: fixed problems in relocation callout.

        * libcoff.h: (struct icofdata) removed hdr structure from tdata.

        * m68kcoff.c: updated target vector.

        * sunos.c: (choose_reloc_size) added: (sunos4_callback) calls
        choose_reloc_size. (sunos4_write_object_contents) now calls
        choose_reloc_size so outputs relocs correctly, also calculates the
        size of the sections correctly.



Fri May 10 16:58:53 1991  John Gilmore  (gnu at cygint.cygnus.com)

        Merge Per Bothner's changes to modularize BFD a.out a bit.

        * libbfd.h, libbfd.c (bfd_generic_get_section_contents):  Add.
        * ieee.c:  Cast enums to int before comparing them, for brain-
        dead compilers.
        * coff-code.h:  Remove coff_get_section_contents, and use the
        generic one instead.

        * aout.c:  Derive new module from sunos.c, containing generic
        support code for all kinds of a.out files.

        * sunos.c: Remove all code that goes in aout.c.  Split out
        machine dependent followup in sunos4_object_p into
        sunos4_callback.  Use JUMP_TABLE(aout) for the transver vector,
        and redefine only the names we CHANGE, not all the names.  Drop
        the little-endian vector, and rename the vector as sunos4 rather
        than generic.

        * b.out.c:  Use aout.c routines for most of the work.  Slight
        changes for the new regime.  Remove close_and_cleanup and
        get_section_contents in favor of generics.  New transfer vector
        regime.

        * newsos.c:  New support for Sony NEWS, another a.out format.

        * ecoff.c:  Remove close_and_cleanup.  New tvec regime.
        * icoff.c, m88k-bcs.c:  Add write_contents to tvec.
        * ieee.c, oasys.c:  Remove close_and_cleanup, add write_contents
        to tvec. 
        * opncls.c (bfd_close):  Call format-dependent write_contents
        routine, if writing, before calling target-dependent
        close_and_cleanup routine (which is now always generic, I think).
        * srec.c:  Use bfd_alloc instead of malloc.  Remove
        close_and_cleanup and move code from it to
        srec_write_object_contents.  Add write_contents to tvec.
        * targets.c:  Remove a.out little vector, replace a.out big
        vector with SunOS vector.  FIXME:  Need Vax support again now.

        * libbfd.h:  Add write_contents format-dependent-vector to the
        bfd_target vector.  Supply a generic close_and_cleanup routine.
        * liba.out.h:  Handle the new aout.c split.  Add prototypes for
        all routines defined in aout.c.  Rename "sunos" things to "aout"
        things.  Add a few fields where needed for various formats.
        * Makefile.in:  Add aout.c and newsos.c.

        * archive.c, ieee.c, oasys.c:  Lint.

Fri May 10 12:34:48 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * ../include/bfd.h
        changed forward declaration struct stat; to reduce warnings. Changed
        comment on bfd_h_<x>_x.

        * ../include/m68kcoff.h, ../include/intel-coff.h,
        ../include/m88k-bcs.h
        Now there are two incarnations of relocs, linenos and syments. One for
        internal digestion, and one full of char arrays for I/O. The original
        names have gone to detect errors.

        * Makefile.in, m68kcoff.c, targets.c
        Test new structure code with a 68k coff implementaion

        * coff-code.h, icoff.c, coffswap.c, libcoff.h 
        Fixed all the places where there were problems with the size and
        alignments of structures on disk and structures in memory. #ifed out
        all the code in coffswap.c, since it should be done using the target
        swap routines now.

Thu May  9 11:00:45 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * ieee.c (do_one, ieee_slurp_section_data): now supports the load
        multiple reloc command.

        * sunos.c (sunos4_set_section_contents): Made it so that sections
        are always padded to their alignment size.

Sat May  4 15:49:43 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * archive.c, bfd.c, coff-code.h, opncls.c, sunos.c, trad-core.c:
        Clean up types and such (saber C problems).
        * ecoff.c:  Clean up types and such.  Remove routines that are
        not used.  Fix up reading and swapping of shorts from files.

   Notes on bfd-0.5.2-patch1a, from Per Bothner:

        * a.out.vax.c: Remove two bogus "static" from prototypes.

        * ecoff.c: Got rid of lots of non-working junk (that had
        been copied directly from coff-code.h).
        Updated to be consistent with updates to icoff.c and coff-code.h.

        * libbfd.h: Added definitions for S_IXUSR, S_IXGRP, and S_IXOTH
        if they're missing (as they are in (BDS-4.3-based) NewsOS-3).

        * sunos.c (n_txtoff): (Re-)Add support for sony. This is a kludge,
        but until the target_vector is automatically generated,
        it's as good as any. Note that the text offset is the only
        difference between NewsOS and SunOs (including magic numbers).
        (Most of the sunos_* routines should to renamed bsd_*
        and move to a bsd.c file. Then (and when the target_vector
        is automatically generated) it might make sense to create
        a separate Sony target.)

        * sysdep.h: Don't declare fread and fwrite. Causes trouble
        on some systems, and doesn't help on others.
        Similarly, only define X_OK if not already defined.

        * trad-core.c: Don't include sys/stat.h - at least
        on NewsOS 3, it has already been included.

Tue Mar  5 01:47:57 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * coff-code.h (bfd_coff_swap_sym, bfd_coff_swap_aux,
        bfd_coff_swap_lineno):  Export the routines that byte-swap COFF
        symbol tables if necessary when reading them in, so gdb can use
        them.  Add "bfd_coff_" to the names so they won't conflict with
        names in calling programs.  FIXME-soon:  if coff-code.h is
        included in two BFD modules, this will cause duplicate
        definitions; the routines should be exported to a separate,
        common, module (probably along with a mess of other ones).

Sat Mar  2 12:11:26 1991  John Gilmore  (gnu at cygint.cygnus.com)

        Improve modtime support.

        * bfd.h:  Add boolean mtime_set, and declare bfd_get_mtime.
        Remove #define for bfd_get_mtime.  Remove gratuitous comment.
        * bfd.c (bfd_get_mtime):  New fn, caches mtime, gets if not cached.
        BUG:  archive members still do not get correct mod times.

        Improve floating point support for core files.

        * sunos.c (struct core):  Change void *fpa_dummy to double fp_stuff.
        (sunos4_core_file_p):  Create a second registers section in the
        core file, called ".reg2", for the float registers.

Thu Feb 14 15:49:06 1991  Gumby Vinayak Wallace  (gumby at cygint.cygnus.com)

        * many changes to improve archive handling; found a logic flaw in
          bfd_check_format which only just happened to work by cooncidence.

Thu Feb 14 07:53:16 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * bfd.c (bfd_perform_relocation): fixed to use output_offsets
        correctly.
        
        * bfd.h: changed type of udata in asymbol to void *, like it
        should be. Added bfd_reloc_dangerous enum member.

        * coff-code.h: Fixed it so that internally generated symbols get
        their values relocated correctly in all cases. Removed calls to
        xmalloc.

        * icoff.c: Not understanding the destination symbol of a reloc is
        not a failure any more, just 'dangerous'. This allows linking of
        b.out and coff images.

        * sunos.c: Cleaned up the way that ZMAGIC section sizes are
        calculated.


Tue Feb 12 13:25:46 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * sunos.c (translate_to_native_sym_flags): fixed
        sym_pointer->n_value so that symbols on the way out get their
        section relative values calculated correctly.

        * coff-code.h (mangle_symbols): fixed problem where tags were not
        being relocated for structs, enums, unions. Also various lints.

Mon Feb 11 19:52:26 1991  Gumby Vinayak Wallace  (gumby at cygint.cygnus.com)

        * archive.c (get_elt_at_filepos): system_call_error returned
          incorrectly.

Sun Feb 10 23:18:40 1991  Gumby Vinayak Wallace  (gumby at cygint.cygnus.com)

        * Resolve the use of no_error and system_call_error.
          The bfd library itself now will never set bfd_error to
          no_error.

          The code still needs to be combed to make sure all the error
          codes are correct.  I suspect they are not always set correctly.

        * The names of all the messages have _ prepended because the sun
          bundled compiler can't distinguish from a macro which takes an
          argument and the same identifier in a non-macro context.

        * The reason for the above being that entry points which used to
          be trampoline functions are now just macros which expand to a
          direct call through the bfd's xfer vector.

        * (../include/intel-coff.h) F_AR32WR: fix this constant.  Why
          must gas have its own version of everything (the gas version
          had the correct value)

Tue Feb  5 11:46:53 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        * b.out.c: Added patches supplied by chrisb@mipon2.intel.com to
        properly support i960 architecture and output correct reloc stuff.

        * bfd.h: added prototype for bfd_printable_arch_mach, added
        BFD_FAIL

        * coff-code.h: Applied patches from chrisb to support i960
        architecture, zero relocs and swap them correcly and conditionally
        compiled the timestamp.

        * sunos.c: Made the default section alignment 2^3 so that doubles
        are done properly. Fixed the same reloc bug that was in b.out.c

        * sysdep.h: Now compiles on a Posix box

Wed Jan 30 21:36:26 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * icoff.c:  Fix comment on big-endian version.
        * coff-code.h:  Make HAS_RELOC really work (it's backwards from
        F_RELFLG).  Set F_AR32WR in output files if little endian
        architecture.

Tue Jan 29 20:56:10 PST 1991 steve@cygnus.com
        
        * archures.c fixed =/== typo
        
        * sunos.c added architecture stuff for output. Fixed
        bug where files where vma(data) != size(text) 
        were processed wrong.

        * coff-code.h added a lint cast

        * (../include/a.out.sun4.h) fixed it so zmagic
        worked

Mon Jan 28 19:15:29 PST 1991 steve@cygnus.com

        * archive.c removed loads of includes, and fixed bug where string
        table didn't have a null at the end.

        * bfd.c fixed includes, added symbols argument to 
        canonicalize_reloc entry point.

        * libbfd.c fixed includes and added some lint patches.
        
        * targets.c added both sorts of intel coff.

        * b.out.c fixed included, changed was the canonical
        relocs were done.

        * icoff.c added support for callj and big and little
        enidian tables.

        * opncls.c added chmod+xing for files with EXEC_P set.

        * sunos.c fixed includes. Changed default section
        alignement to words. Fixed relocation stuff to work with
        new scheme

        * bfd.h various new types added, prototype for new
        reloc calls, changed bfd->iostream to a void *
        to including files don't need stdio.h.

        * libcoff.h added conversion table to tie relocs to
        canonical symbols
                
        * sysdep.h created

        * coff-code.h fixed includes. Added code to support
        big and little endian formats. Various lints. Better
        processing of symbols. Changed reloc stuff to new
        order

        * libbfd.h fixed includes


Mon Jan 21 11:53:51 PST 1991 steve@cygnus.com
        
        * bfd.h changed name of alignment entry in sec_struct to
        alignment_power, because of conflicting uses within bfd.
        Now it should be obvious that it's a 2**n alignment
        specifier. Removed start_pad, end_alignment, block, minsize,
        output_file_alignment, subsection_alignment and original_vma fields.
        Added align_power() macro. Fixed bfd_section_alignment
        acessor macros. Added bfd_symbol_same_target macro.

        * b.out.c (b_out_write_object_contents) fixed to use
        new alignment member. Fixed (callj_callback) to use section
        relative symbols properly.

        * sunos.c (sunos4_object_p) fixed to use new alignment_power.
        Fixed (translate_from_native_sym_flags) to correctly make       
        symbols section relative.

        * bfd.c (bfd_errmsg) fixed various enum cast problems. 
        (bfd_make_section) took out initialization of obsolete members.
        (bfd_print_symbol_vandf) added

        * opncls.c (bfd_create) created.

        * coff-code.h (coff_new_section_hook) took away refs
        to obsolete members. (make_a_section_from_file) added
        conversion between alignment types. (coff_symbol_from)
        added. (coff_count_linenumbers) only counts linenumbers
        if symbol is of coff-type. (coff_mangle_symbols) only
        heavily mangles symbols if symbol is coff-type.
        (coff_write_symbols) various lints. (coff_write_object_contents)
        various lints and modification for alignment conversion.
        (coff_slurp_relocs) fixed for use with new asection shape.

Sat Jan 19 16:10:42 PST 1991 steve@cygnus.com

        * archive.c lots of lint

        * b.out.c added callj relocation support, upgrated reloc howto.
        Fixed so that asymbol and reloc records are output 
        correctly.

        * bfd.c lots of lint, support for new bfd entry point
        bfd_print_symbol.

        * bfd.h changed definition of asymbol to contain pointer to
        owning bfd, removed target dependencies.

        * cache.c took out print statements, put in BFD_ASSERT calls.

        * coff-code.h various lints, corrected linenumber output
        functionality. Added support for new style asymbols and
        bfd_print_symbol. Fixed so that asymbol and
        reloc records are handled correctly. Added timestamp.

        * icoff.c Added support for new howto shape.
        
        * liba.out.h Added support for new asymbol shape

        * libbfd.c various lints

        * libbfd.h various lints

        * libcoff.h added support for new asymbol shape.

        * sunos.c  various lints. Added support for new asymbol shape
        and bfd_print_symbol.

Wed Jan 16 21:38:09 PST 1991 steve@cygnus.com

        * b.out.c removed prototype of sunos4_ennativate_symtab, lots of
        pointer lint. Added support for callj relocation. Fixed bug where
        the last 32 bytes of the text section were overwritten by data. Fixed bug
        where archives of b.out didn't work due bfd_slurp_extended_name_table
        returning false.

        * sunos.c added support for n_other field. Braced the howto table so
        that it won't be affected by any lengthing of the howto struct typedef.
        Various lints

        * bfd.h added support for n_other field, added special_function         
        reloc type, modified bfd_perform_relocation prototype. Added bfd_h_get_x
        macros.

        * bfd.c upgraded bfd_perform_relocation, various lints.

Wed Jan 16 01:55:53 1991  John Gilmore  (gnu at rtl)

        * ChangeLog:  Started ChangeLog for BFD.
        * ToDo:  Create file for suggestions.

        * Makefile:  Support easy loading into Saber C.
        Add dependencies for icoff.o and bcs88kcoff.o.
        Rename coff.c to coff-code.h.  Change callers.

        * bfd.c (bfd_check_format):  Allow the check_format routines
        to return the desired target vector, rather than just a Boolean.
        bfd.h (bfd_check_format):  Change function pointer return type.
        archive.c (bfd_generic_archive_p):  change callee.
        b.out.c (b_out_little_object_p, b_out_big_object_p,
        b_out_real_object_p):  change callee.
        libbfd.c (_bfd_dummy_target):  Dummy routine replacing bfd_false
        in check_format transfer vectors that need a filler.
        libbfd.h (bfd_generic_archive_p, _bfd_dummy_target):  Fix decls.
        bcs88kcoff.c:  change callee.
        coff-code.h (coff_real_object_p, coff_big_object_p):  change callee.
        icoff.c:  change callee.
        sunos.c (sunos4_object_p, sunos4_core_file_p):  change callee.

        * libbfd.c (zalloc):  It should actually zero the storage!
        This was commented out for some reason.

        * libbfd.h:  Add malloc, xmalloc, memcpy, and fatal decls.
        This is so callers can avoid <stdlib.h> which doesn't exist
        on older systems.

        * bfd.c (map_over_sections):  Add debugging code, since I
        noticed the section count for sunos core files was bad, but only
        GDB had detected the problem.
        (bfd_set_section_lineno_size, bfd_set_section_linenos,
        bfd_get_section_linenos):  Remove obsolete functions.
        (bfd_apply_relocations):  Use longs, not ints, for the math.

        * bfd.h:  Declare enum boolean and struct bfd_target as well
        as typedefs for them.  Remove obsolete
        bfd_get_section_lineno_size.

        * cache.c:  Make the "fdopen" support work.  Keep better track
        of how many files are open.  Centralize the opening of files
        and be sure bfd_open[rw] actually try to open the file.  Evade
        linked list initialization problems.

        * b.out.c, coff-code.h, opncls.c, sunos.c:  lint.

        * coff-code.h (coff_slurp_symbol_table):  Null-terminate symtab names.

        * cplus-dem.c:  Delete file, since it is not part of BFD.

        * opncls.c (bfd_openr):  Eliminate misplaced #if 0 code.
        (bfd_openr, bfd_openw):  Actually open the file, give error now.
        
        * sunos.c (sunos4_core_file_p):  Set section count.
        (sunos4_set_section_linenos, stab_names, fprint_name):  Eliminiate
        obsolete definitions.
        (_write_symbol_table):  Initialize <idx> counter.
        (foop):  Eliminate debugging code.