1 /* Main header file for the bfd library -- portable access to object files.
2 Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
3 Contributed by Cygnus Support.
5 ** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
6 ** instead, change bfd-in.h or the other BFD source files processed to
7 ** generate these files.
9 This file is part of BFD, the Binary File Descriptor library.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
25 /* bfd.h -- The only header file required by users of the bfd library
27 The bfd.h file is generated from bfd-in.h and various .c files; if you
28 change it, your changes will probably be lost.
30 All the prototypes and definitions following the comment "THE FOLLOWING
31 IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
32 BFD. If you change it, someone oneday will extract it from the source
33 again, and your changes will be lost. To save yourself from this bind,
34 change the definitions in the source in the bfd directory. Type "make
35 docs" and then "make headers" in that directory, and magically this file
36 will change to reflect your changes.
38 If you don't have the tools to perform the extraction, then you are
39 safe from someone on your system trampling over your header files.
40 You should still maintain the equivalence between the source and this
41 file though; every change you make to the .c file should be reflected
44 #ifndef __BFD_H_SEEN__
45 #define __BFD_H_SEEN__
50 /* These two lines get substitutions done by commands in Makefile.in. */
51 #define BFD_VERSION "@VERSION@"
52 #define BFD_ARCH_SIZE @WORDSIZE@
54 #if BFD_ARCH_SIZE >= 64
60 #define INLINE __inline__
66 /* 64-bit type definition (if any) from bfd's sysdep.h goes here */
69 /* forward declaration */
70 typedef struct _bfd bfd
;
72 /* To squelch erroneous compiler warnings ("illegal pointer
73 combination") from the SVR3 compiler, we would like to typedef
74 boolean to int (it doesn't like functions which return boolean.
75 Making sure they are never implicitly declared to return int
76 doesn't seem to help). But this file is not configured based on
78 /* General rules: functions which are boolean return true on success
79 and false on failure (unless they're a predicate). -- bfd.doc */
80 /* I'm sure this is going to break something and someone is going to
81 force me to change it. */
82 /* typedef enum boolean {false, true} boolean; */
83 /* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
84 /* It gets worse if the host also defines a true/false enum... -sts */
85 #ifndef TRUE_FALSE_ALREADY_DEFINED
86 typedef enum bfd_boolean
{false, true} boolean
;
87 #define BFD_TRUE_FALSE
89 typedef enum bfd_boolean
{bfd_false
, bfd_true
} boolean
;
92 /* A pointer to a position in a file. */
93 /* FIXME: This should be using off_t from <sys/types.h>.
94 For now, try to avoid breaking stuff by not including <sys/types.h> here.
95 This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
96 Probably the best long-term answer is to avoid using file_ptr AND off_t
97 in this header file, and to handle this in the BFD implementation
98 rather than in its interface. */
99 /* typedef off_t file_ptr; */
100 typedef long int file_ptr
;
102 /* Support for different sizes of target format ints and addresses. If the
103 host implements 64-bit values, it defines BFD_HOST_64_BIT to be the appropriate
104 type. Otherwise, this code will fall back on gcc's "long long" type if gcc
105 is being used. BFD_HOST_64_BIT must be defined in such a way as to be a valid
106 type name by itself or with "unsigned" prefixed. It should be a signed
109 If neither is the case, then compilation will fail if 64-bit targets are
110 requested. If you don't request any 64-bit targets, you should be safe. */
114 #if defined (__GNUC__) && !defined (BFD_HOST_64_BIT)
115 #define BFD_HOST_64_BIT long long
116 typedef BFD_HOST_64_BIT int64_type
;
117 typedef unsigned BFD_HOST_64_BIT uint64_type
;
120 #if !defined (uint64_type) && defined (__GNUC__)
121 #define uint64_type unsigned long long
122 #define int64_type long long
124 #ifndef uint64_typeLOW
125 #define uint64_typeLOW(x) ((unsigned long)(((x) & 0xffffffff)))
126 #define uint64_typeHIGH(x) ((unsigned long)(((x) >> 32) & 0xffffffff))
129 typedef unsigned BFD_HOST_64_BIT bfd_vma
;
130 typedef BFD_HOST_64_BIT bfd_signed_vma
;
131 typedef unsigned BFD_HOST_64_BIT bfd_size_type
;
132 typedef unsigned BFD_HOST_64_BIT symvalue
;
134 #define fprintf_vma(s,x) \
135 fprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
136 #define sprintf_vma(s,x) \
137 sprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
139 #else /* not BFD64 */
141 /* Represent a target address. Also used as a generic unsigned type
142 which is guaranteed to be big enough to hold any arithmetic types
143 we need to deal with. */
144 typedef unsigned long bfd_vma
;
146 /* A generic signed type which is guaranteed to be big enough to hold any
147 arithmetic types we need to deal with. Can be assumed to be compatible
148 with bfd_vma in the same way that signed and unsigned ints are compatible
149 (as parameters, in assignment, etc). */
150 typedef long bfd_signed_vma
;
152 typedef unsigned long symvalue
;
153 typedef unsigned long bfd_size_type
;
155 /* Print a bfd_vma x on stream s. */
156 #define fprintf_vma(s,x) fprintf(s, "%08lx", x)
157 #define sprintf_vma(s,x) sprintf(s, "%08lx", x)
158 #endif /* not BFD64 */
159 #define printf_vma(x) fprintf_vma(stdout,x)
161 typedef unsigned int flagword
; /* 32 bits of flags */
165 typedef enum bfd_format
{
166 bfd_unknown
= 0, /* file format is unknown */
167 bfd_object
, /* linker/assember/compiler output */
168 bfd_archive
, /* object archive file */
169 bfd_core
, /* core dump */
170 bfd_type_end
} /* marks the end; don't use it! */
173 /* Values that may appear in the flags field of a BFD. These also
174 appear in the object_flags field of the bfd_target structure, where
175 they indicate the set of flags used by that backend (not all flags
176 are meaningful for all object file formats) (FIXME: at the moment,
177 the object_flags values have mostly just been copied from backend
178 to another, and are not necessarily correct). */
181 #define NO_FLAGS 0x00
183 /* BFD contains relocation entries. */
184 #define HAS_RELOC 0x01
186 /* BFD is directly executable. */
189 /* BFD has line number information (basically used for F_LNNO in a
191 #define HAS_LINENO 0x04
193 /* BFD has debugging information. */
194 #define HAS_DEBUG 0x08
196 /* BFD has symbols. */
197 #define HAS_SYMS 0x10
199 /* BFD has local symbols (basically used for F_LSYMS in a COFF
201 #define HAS_LOCALS 0x20
203 /* BFD is a dynamic object. */
206 /* Text section is write protected (if D_PAGED is not set, this is
207 like an a.out NMAGIC file) (the linker sets this by default, but
208 clears it for -r or -N). */
211 /* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
212 linker sets this by default, but clears it for -r or -n or -N). */
213 #define D_PAGED 0x100
215 /* BFD is relaxable (this means that bfd_relax_section may be able to
217 #define BFD_IS_RELAXABLE 0x200
219 /* This may be set before writing out a BFD to request using a
220 traditional format. For example, this is used to request that when
221 writing out an a.out object the symbols not be hashed to eliminate
223 #define BFD_TRADITIONAL_FORMAT 0x400
225 /* symbols and relocation */
227 /* A count of carsyms (canonical archive symbols). */
228 typedef unsigned long symindex
;
230 #define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
232 /* General purpose part of a symbol X;
233 target specific parts are in libcoff.h, libaout.h, etc. */
235 #define bfd_get_section(x) ((x)->section)
236 #define bfd_get_output_section(x) ((x)->section->output_section)
237 #define bfd_set_section(x,y) ((x)->section) = (y)
238 #define bfd_asymbol_base(x) ((x)->section->vma)
239 #define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
240 #define bfd_asymbol_name(x) ((x)->name)
241 /*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
242 #define bfd_asymbol_bfd(x) ((x)->the_bfd)
243 #define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
245 /* A canonical archive symbol. */
246 /* This is a type pun with struct ranlib on purpose! */
247 typedef struct carsym
{
249 file_ptr file_offset
; /* look here to find the file */
250 } carsym
; /* to make these you call a carsymogen */
253 /* Used in generating armaps (archive tables of contents).
254 Perhaps just a forward definition would do? */
255 struct orl
{ /* output ranlib */
256 char **name
; /* symbol name */
257 file_ptr pos
; /* bfd* or file position */
258 int namidx
; /* index into string table */
263 /* Linenumber stuff */
264 typedef struct lineno_cache_entry
{
265 unsigned int line_number
; /* Linenumber from start of function*/
267 struct symbol_cache_entry
*sym
; /* Function name */
268 unsigned long offset
; /* Offset into section */
272 /* object and core file sections */
275 #define align_power(addr, align) \
276 ( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
278 typedef struct sec
*sec_ptr
;
280 #define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
281 #define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
282 #define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
283 #define bfd_section_name(bfd, ptr) ((ptr)->name)
284 #define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
285 #define bfd_section_vma(bfd, ptr) ((ptr)->vma)
286 #define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
287 #define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
288 #define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
290 #define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
292 #define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = true), true)
293 #define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
294 #define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
296 typedef struct stat stat_type
;
298 typedef enum bfd_print_symbol
300 bfd_print_symbol_name
,
301 bfd_print_symbol_more
,
303 } bfd_print_symbol_type
;
305 /* Information about a symbol that nm needs. */
307 typedef struct _symbol_info
311 CONST
char *name
; /* Symbol name. */
312 char stab_other
; /* Unused. */
313 short stab_desc
; /* Info for N_TYPE. */
314 CONST
char *stab_name
;
317 /* Hash table routines. There is no way to free up a hash table. */
319 /* An element in the hash table. Most uses will actually use a larger
320 structure, and an instance of this will be the first field. */
322 struct bfd_hash_entry
324 /* Next entry for this hash code. */
325 struct bfd_hash_entry
*next
;
326 /* String being hashed. */
328 /* Hash code. This is the full hash code, not the index into the
335 struct bfd_hash_table
337 /* The hash array. */
338 struct bfd_hash_entry
**table
;
339 /* The number of slots in the hash table. */
341 /* A function used to create new elements in the hash table. The
342 first entry is itself a pointer to an element. When this
343 function is first invoked, this pointer will be NULL. However,
344 having the pointer permits a hierarchy of method functions to be
345 built each of which calls the function in the superclass. Thus
346 each function should be written to allocate a new block of memory
347 only if the argument is NULL. */
348 struct bfd_hash_entry
*(*newfunc
) PARAMS ((struct bfd_hash_entry
*,
349 struct bfd_hash_table
*,
351 /* An obstack for this hash table. */
352 struct obstack memory
;
355 /* Initialize a hash table. */
356 extern boolean bfd_hash_table_init
357 PARAMS ((struct bfd_hash_table
*,
358 struct bfd_hash_entry
*(*) (struct bfd_hash_entry
*,
359 struct bfd_hash_table
*,
362 /* Initialize a hash table specifying a size. */
363 extern boolean bfd_hash_table_init_n
364 PARAMS ((struct bfd_hash_table
*,
365 struct bfd_hash_entry
*(*) (struct bfd_hash_entry
*,
366 struct bfd_hash_table
*,
370 /* Free up a hash table. */
371 extern void bfd_hash_table_free
PARAMS ((struct bfd_hash_table
*));
373 /* Look up a string in a hash table. If CREATE is true, a new entry
374 will be created for this string if one does not already exist. The
375 COPY argument must be true if this routine should copy the string
376 into newly allocated memory when adding an entry. */
377 extern struct bfd_hash_entry
*bfd_hash_lookup
378 PARAMS ((struct bfd_hash_table
*, const char *, boolean create
,
381 /* Base method for creating a hash table entry. */
382 extern struct bfd_hash_entry
*bfd_hash_newfunc
383 PARAMS ((struct bfd_hash_entry
*, struct bfd_hash_table
*,
386 /* Grab some space for a hash table entry. */
387 extern PTR bfd_hash_allocate
PARAMS ((struct bfd_hash_table
*,
390 /* Traverse a hash table in a random order, calling a function on each
391 element. If the function returns false, the traversal stops. The
392 INFO argument is passed to the function. */
393 extern void bfd_hash_traverse
PARAMS ((struct bfd_hash_table
*,
394 boolean (*) (struct bfd_hash_entry
*,
398 /* Semi-portable string concatenation in cpp.
399 The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
400 The problem is, "32_" is not a valid preprocessing token, and we don't
401 want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the
402 inner CAT macros to be evaluated first, producing still-valid pp-tokens.
403 Then the final concatenation can be done. (Sigh.) */
406 #define CAT(a,b) a##b
407 #define CAT3(a,b,c) a##b##c
408 #define CAT4(a,b,c,d) a##b##c##d
410 #if defined(__STDC__) || defined(ALMOST_STDC)
411 #define CAT(a,b) a##b
412 #define CAT3(a,b,c) a##b##c
413 #define XCAT2(a,b) CAT(a,b)
414 #define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d))
416 #define CAT(a,b) a/**/b
417 #define CAT3(a,b,c) a/**/b/**/c
418 #define CAT4(a,b,c,d) a/**/b/**/c/**/d
423 #define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
425 /* User program access to BFD facilities */
427 /* Cast from const char * to char * so that caller can assign to
428 a char * without a warning. */
429 #define bfd_get_filename(abfd) ((char *) (abfd)->filename)
430 #define bfd_get_cacheable(abfd) ((abfd)->cacheable)
431 #define bfd_get_format(abfd) ((abfd)->format)
432 #define bfd_get_target(abfd) ((abfd)->xvec->name)
433 #define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
434 #define bfd_get_file_flags(abfd) ((abfd)->flags)
435 #define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
436 #define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
437 #define bfd_my_archive(abfd) ((abfd)->my_archive)
438 #define bfd_has_map(abfd) ((abfd)->has_armap)
440 #define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
441 #define bfd_usrdata(abfd) ((abfd)->usrdata)
443 #define bfd_get_start_address(abfd) ((abfd)->start_address)
444 #define bfd_get_symcount(abfd) ((abfd)->symcount)
445 #define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
446 #define bfd_count_sections(abfd) ((abfd)->section_count)
448 #define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
450 #define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (bool)), true)
452 /* Byte swapping routines. */
454 bfd_vma bfd_getb64
PARAMS ((const unsigned char *));
455 bfd_vma bfd_getl64
PARAMS ((const unsigned char *));
456 bfd_signed_vma bfd_getb_signed_64
PARAMS ((const unsigned char *));
457 bfd_signed_vma bfd_getl_signed_64
PARAMS ((const unsigned char *));
458 bfd_vma bfd_getb32
PARAMS ((const unsigned char *));
459 bfd_vma bfd_getl32
PARAMS ((const unsigned char *));
460 bfd_signed_vma bfd_getb_signed_32
PARAMS ((const unsigned char *));
461 bfd_signed_vma bfd_getl_signed_32
PARAMS ((const unsigned char *));
462 bfd_vma bfd_getb16
PARAMS ((const unsigned char *));
463 bfd_vma bfd_getl16
PARAMS ((const unsigned char *));
464 bfd_signed_vma bfd_getb_signed_16
PARAMS ((const unsigned char *));
465 bfd_signed_vma bfd_getl_signed_16
PARAMS ((const unsigned char *));
466 void bfd_putb64
PARAMS ((bfd_vma
, unsigned char *));
467 void bfd_putl64
PARAMS ((bfd_vma
, unsigned char *));
468 void bfd_putb32
PARAMS ((bfd_vma
, unsigned char *));
469 void bfd_putl32
PARAMS ((bfd_vma
, unsigned char *));
470 void bfd_putb16
PARAMS ((bfd_vma
, unsigned char *));
471 void bfd_putl16
PARAMS ((bfd_vma
, unsigned char *));
473 /* Externally visible ECOFF routines. */
475 #if defined(__STDC__) || defined(ALMOST_STDC)
476 struct ecoff_debug_info
;
477 struct ecoff_debug_swap
;
479 struct symbol_cache_entry
;
480 struct bfd_link_info
;
482 extern bfd_vma bfd_ecoff_get_gp_value
PARAMS ((bfd
* abfd
));
483 extern boolean bfd_ecoff_set_gp_value
PARAMS ((bfd
*abfd
, bfd_vma gp_value
));
484 extern boolean bfd_ecoff_set_regmasks
485 PARAMS ((bfd
*abfd
, unsigned long gprmask
, unsigned long fprmask
,
486 unsigned long *cprmask
));
487 extern PTR bfd_ecoff_debug_init
488 PARAMS ((bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
489 const struct ecoff_debug_swap
*output_swap
,
490 struct bfd_link_info
*));
491 extern void bfd_ecoff_debug_free
492 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
493 const struct ecoff_debug_swap
*output_swap
,
494 struct bfd_link_info
*));
495 extern boolean bfd_ecoff_debug_accumulate
496 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
497 const struct ecoff_debug_swap
*output_swap
,
498 bfd
*input_bfd
, struct ecoff_debug_info
*input_debug
,
499 const struct ecoff_debug_swap
*input_swap
,
500 struct bfd_link_info
*));
501 extern boolean bfd_ecoff_debug_accumulate_other
502 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
503 const struct ecoff_debug_swap
*output_swap
, bfd
*input_bfd
,
504 struct bfd_link_info
*));
505 extern boolean bfd_ecoff_debug_externals
506 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
507 const struct ecoff_debug_swap
*swap
,
508 boolean relocateable
,
509 boolean (*get_extr
) (struct symbol_cache_entry
*,
510 struct ecoff_extr
*),
511 void (*set_index
) (struct symbol_cache_entry
*,
513 extern boolean bfd_ecoff_debug_one_external
514 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
515 const struct ecoff_debug_swap
*swap
,
516 const char *name
, struct ecoff_extr
*esym
));
517 extern bfd_size_type bfd_ecoff_debug_size
518 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
519 const struct ecoff_debug_swap
*swap
));
520 extern boolean bfd_ecoff_write_debug
521 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
522 const struct ecoff_debug_swap
*swap
, file_ptr where
));
523 extern boolean bfd_ecoff_write_accumulated_debug
524 PARAMS ((PTR handle
, bfd
*abfd
, struct ecoff_debug_info
*debug
,
525 const struct ecoff_debug_swap
*swap
,
526 struct bfd_link_info
*info
, file_ptr where
));
528 /* Externally visible ELF routines. */
530 extern boolean bfd_elf32_record_link_assignment
531 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
532 extern boolean bfd_elf64_record_link_assignment
533 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
534 extern boolean bfd_elf32_size_dynamic_sections
535 PARAMS ((bfd
*, struct bfd_link_info
*));
536 extern boolean bfd_elf64_size_dynamic_sections
537 PARAMS ((bfd
*, struct bfd_link_info
*));
539 /* SunOS shared library support routines for the linker. */
541 extern boolean bfd_sunos_record_link_assignment
542 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
543 extern boolean bfd_sunos_size_dynamic_sections
544 PARAMS ((bfd
*, struct bfd_link_info
*, struct sec
**, struct sec
**,
547 /* And more from the source. */
549 bfd_init
PARAMS ((void));
552 bfd_openr
PARAMS ((CONST
char *filename
, CONST
char *target
));
555 bfd_fdopenr
PARAMS ((CONST
char *filename
, CONST
char *target
, int fd
));
558 bfd_openw
PARAMS ((CONST
char *filename
, CONST
char *target
));
561 bfd_close
PARAMS ((bfd
*abfd
));
564 bfd_close_all_done
PARAMS ((bfd
*));
567 bfd_alloc_size
PARAMS ((bfd
*abfd
));
570 bfd_create
PARAMS ((CONST
char *filename
, bfd
*templ
));
573 /* Byte swapping macros for user section data. */
575 #define bfd_put_8(abfd, val, ptr) \
576 (*((unsigned char *)(ptr)) = (unsigned char)(val))
577 #define bfd_put_signed_8 \
579 #define bfd_get_8(abfd, ptr) \
580 (*(unsigned char *)(ptr))
581 #define bfd_get_signed_8(abfd, ptr) \
582 ((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
584 #define bfd_put_16(abfd, val, ptr) \
585 BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
586 #define bfd_put_signed_16 \
588 #define bfd_get_16(abfd, ptr) \
589 BFD_SEND(abfd, bfd_getx16, (ptr))
590 #define bfd_get_signed_16(abfd, ptr) \
591 BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
593 #define bfd_put_32(abfd, val, ptr) \
594 BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
595 #define bfd_put_signed_32 \
597 #define bfd_get_32(abfd, ptr) \
598 BFD_SEND(abfd, bfd_getx32, (ptr))
599 #define bfd_get_signed_32(abfd, ptr) \
600 BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
602 #define bfd_put_64(abfd, val, ptr) \
603 BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
604 #define bfd_put_signed_64 \
606 #define bfd_get_64(abfd, ptr) \
607 BFD_SEND(abfd, bfd_getx64, (ptr))
608 #define bfd_get_signed_64(abfd, ptr) \
609 BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
612 /* Byte swapping macros for file header data. */
614 #define bfd_h_put_8(abfd, val, ptr) \
615 bfd_put_8 (abfd, val, ptr)
616 #define bfd_h_put_signed_8(abfd, val, ptr) \
617 bfd_put_8 (abfd, val, ptr)
618 #define bfd_h_get_8(abfd, ptr) \
619 bfd_get_8 (abfd, ptr)
620 #define bfd_h_get_signed_8(abfd, ptr) \
621 bfd_get_signed_8 (abfd, ptr)
623 #define bfd_h_put_16(abfd, val, ptr) \
624 BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
625 #define bfd_h_put_signed_16 \
627 #define bfd_h_get_16(abfd, ptr) \
628 BFD_SEND(abfd, bfd_h_getx16,(ptr))
629 #define bfd_h_get_signed_16(abfd, ptr) \
630 BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
632 #define bfd_h_put_32(abfd, val, ptr) \
633 BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
634 #define bfd_h_put_signed_32 \
636 #define bfd_h_get_32(abfd, ptr) \
637 BFD_SEND(abfd, bfd_h_getx32,(ptr))
638 #define bfd_h_get_signed_32(abfd, ptr) \
639 BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
641 #define bfd_h_put_64(abfd, val, ptr) \
642 BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
643 #define bfd_h_put_signed_64 \
645 #define bfd_h_get_64(abfd, ptr) \
646 BFD_SEND(abfd, bfd_h_getx64,(ptr))
647 #define bfd_h_get_signed_64(abfd, ptr) \
648 BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
652 /* The name of the section; the name isn't a copy, the pointer is
653 the same as that passed to bfd_make_section. */
657 /* Which section is it; 0..nth. */
661 /* The next section in the list belonging to the BFD, or NULL. */
665 /* The field flags contains attributes of the section. Some
666 flags are read in from the object file, and some are
667 synthesized from other information. */
671 #define SEC_NO_FLAGS 0x000
673 /* Tells the OS to allocate space for this section when loading.
674 This is clear for a section containing debug information
676 #define SEC_ALLOC 0x001
678 /* Tells the OS to load the section from the file when loading.
679 This is clear for a .bss section. */
680 #define SEC_LOAD 0x002
682 /* The section contains data still to be relocated, so there is
683 some relocation information too. */
684 #define SEC_RELOC 0x004
686 #if 0 /* Obsolete ? */
687 #define SEC_BALIGN 0x008
690 /* A signal to the OS that the section contains read only
692 #define SEC_READONLY 0x010
694 /* The section contains code only. */
695 #define SEC_CODE 0x020
697 /* The section contains data only. */
698 #define SEC_DATA 0x040
700 /* The section will reside in ROM. */
701 #define SEC_ROM 0x080
703 /* The section contains constructor information. This section
704 type is used by the linker to create lists of constructors and
705 destructors used by <<g++>>. When a back end sees a symbol
706 which should be used in a constructor list, it creates a new
707 section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
708 the symbol to it, and builds a relocation. To build the lists
709 of constructors, all the linker has to do is catenate all the
710 sections called <<__CTOR_LIST__>> and relocate the data
711 contained within - exactly the operations it would peform on
713 #define SEC_CONSTRUCTOR 0x100
715 /* The section is a constuctor, and should be placed at the
716 end of the text, data, or bss section(?). */
717 #define SEC_CONSTRUCTOR_TEXT 0x1100
718 #define SEC_CONSTRUCTOR_DATA 0x2100
719 #define SEC_CONSTRUCTOR_BSS 0x3100
721 /* The section has contents - a data section could be
722 <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
723 <<SEC_HAS_CONTENTS>> */
724 #define SEC_HAS_CONTENTS 0x200
726 /* An instruction to the linker to not output the section
727 even if it has information which would normally be written. */
728 #define SEC_NEVER_LOAD 0x400
730 /* The section is a COFF shared library section. This flag is
731 only for the linker. If this type of section appears in
732 the input file, the linker must copy it to the output file
733 without changing the vma or size. FIXME: Although this
734 was originally intended to be general, it really is COFF
735 specific (and the flag was renamed to indicate this). It
736 might be cleaner to have some more general mechanism to
737 allow the back end to control what the linker does with
739 #define SEC_COFF_SHARED_LIBRARY 0x800
741 /* The section is a common section (symbols may be defined
742 multiple times, the value of a symbol is the amount of
743 space it requires, and the largest symbol value is the one
744 used). Most targets have exactly one of these (which we
745 translate to bfd_com_section), but ECOFF has two. */
746 #define SEC_IS_COMMON 0x8000
748 /* The section contains only debugging information. For
749 example, this is set for ELF .debug and .stab sections.
750 strip tests this flag to see if a section can be
752 #define SEC_DEBUGGING 0x10000
754 /* The contents of this section are held in memory pointed to
755 by the contents field. This is checked by
756 bfd_get_section_contents, and the data is retrieved from
757 memory if appropriate. */
758 #define SEC_IN_MEMORY 0x20000
760 /* End of section flags. */
762 /* The virtual memory address of the section - where it will be
763 at run time. The symbols are relocated against this. The
764 user_set_vma flag is maintained by bfd; if it's not set, the
765 backend can assign addresses (for example, in <<a.out>>, where
766 the default address for <<.data>> is dependent on the specific
767 target and various flags). */
770 boolean user_set_vma
;
772 /* The load address of the section - where it would be in a
773 rom image; really only used for writing section header
778 /* The size of the section in bytes, as it will be output.
779 contains a value even if the section has no contents (e.g., the
780 size of <<.bss>>). This will be filled in after relocation */
782 bfd_size_type _cooked_size
;
784 /* The original size on disk of the section, in bytes. Normally this
785 value is the same as the size, but if some relaxing has
786 been done, then this value will be bigger. */
788 bfd_size_type _raw_size
;
790 /* If this section is going to be output, then this value is the
791 offset into the output section of the first byte in the input
792 section. E.g., if this was going to start at the 100th byte in
793 the output section, this value would be 100. */
795 bfd_vma output_offset
;
797 /* The output section through which to map on output. */
799 struct sec
*output_section
;
801 /* The alignment requirement of the section, as an exponent of 2 -
802 e.g., 3 aligns to 2^3 (or 8). */
804 unsigned int alignment_power
;
806 /* If an input section, a pointer to a vector of relocation
807 records for the data in this section. */
809 struct reloc_cache_entry
*relocation
;
811 /* If an output section, a pointer to a vector of pointers to
812 relocation records for the data in this section. */
814 struct reloc_cache_entry
**orelocation
;
816 /* The number of relocation records in one of the above */
818 unsigned reloc_count
;
820 /* Information below is back end specific - and not always used
823 /* File position of section data */
827 /* File position of relocation info */
829 file_ptr rel_filepos
;
831 /* File position of line data */
833 file_ptr line_filepos
;
835 /* Pointer to data for applications */
839 /* If the SEC_IN_MEMORY flag is set, this points to the actual
841 unsigned char *contents
;
843 /* Attached line number information */
847 /* Number of line number records */
849 unsigned int lineno_count
;
851 /* When a section is being output, this value changes as more
852 linenumbers are written out */
854 file_ptr moving_line_filepos
;
856 /* What the section number is in the target world */
862 /* If this is a constructor section then here is a list of the
863 relocations created to relocate items within it. */
865 struct relent_chain
*constructor_chain
;
867 /* The BFD which owns the section. */
872 /* A symbol which points at this section only */
873 struct symbol_cache_entry
*symbol
;
874 struct symbol_cache_entry
**symbol_ptr_ptr
;
876 struct bfd_link_order
*link_order_head
;
877 struct bfd_link_order
*link_order_tail
;
881 /* These sections are global, and are managed by BFD. The application
882 and target back end are not permitted to change the values in
884 #define BFD_ABS_SECTION_NAME "*ABS*"
885 #define BFD_UND_SECTION_NAME "*UND*"
886 #define BFD_COM_SECTION_NAME "*COM*"
887 #define BFD_IND_SECTION_NAME "*IND*"
889 /* the absolute section */
890 extern asection bfd_abs_section
;
891 /* Pointer to the undefined section */
892 extern asection bfd_und_section
;
893 /* Pointer to the common section */
894 extern asection bfd_com_section
;
895 /* Pointer to the indirect section */
896 extern asection bfd_ind_section
;
898 extern struct symbol_cache_entry
*bfd_abs_symbol
;
899 extern struct symbol_cache_entry
*bfd_com_symbol
;
900 extern struct symbol_cache_entry
*bfd_und_symbol
;
901 extern struct symbol_cache_entry
*bfd_ind_symbol
;
902 #define bfd_get_section_size_before_reloc(section) \
903 (section->reloc_done ? (abort(),1): (section)->_raw_size)
904 #define bfd_get_section_size_after_reloc(section) \
905 ((section->reloc_done) ? (section)->_cooked_size: (abort(),1))
907 bfd_get_section_by_name
PARAMS ((bfd
*abfd
, CONST
char *name
));
910 bfd_make_section_old_way
PARAMS ((bfd
*abfd
, CONST
char *name
));
913 bfd_make_section_anyway
PARAMS ((bfd
*abfd
, CONST
char *name
));
916 bfd_make_section
PARAMS ((bfd
*, CONST
char *name
));
919 bfd_set_section_flags
PARAMS ((bfd
*abfd
, asection
*sec
, flagword flags
));
922 bfd_map_over_sections
PARAMS ((bfd
*abfd
,
923 void (*func
)(bfd
*abfd
,
929 bfd_set_section_size
PARAMS ((bfd
*abfd
, asection
*sec
, bfd_size_type val
));
932 bfd_set_section_contents
937 bfd_size_type count
));
940 bfd_get_section_contents
941 PARAMS ((bfd
*abfd
, asection
*section
, PTR location
,
942 file_ptr offset
, bfd_size_type count
));
945 bfd_copy_private_section_data
PARAMS ((bfd
*ibfd
, asection
*isec
, bfd
*obfd
, asection
*osec
));
947 #define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
948 BFD_SEND (ibfd, _bfd_copy_private_section_data, \
949 (ibfd, isection, obfd, osection))
950 enum bfd_architecture
952 bfd_arch_unknown
, /* File arch not known */
953 bfd_arch_obscure
, /* Arch known, not one of these */
954 bfd_arch_m68k
, /* Motorola 68xxx */
955 bfd_arch_vax
, /* DEC Vax */
956 bfd_arch_i960
, /* Intel 960 */
957 /* The order of the following is important.
958 lower number indicates a machine type that
959 only accepts a subset of the instructions
960 available to machines with higher numbers.
961 The exception is the "ca", which is
962 incompatible with all other machines except
965 #define bfd_mach_i960_core 1
966 #define bfd_mach_i960_ka_sa 2
967 #define bfd_mach_i960_kb_sb 3
968 #define bfd_mach_i960_mc 4
969 #define bfd_mach_i960_xa 5
970 #define bfd_mach_i960_ca 6
972 bfd_arch_a29k
, /* AMD 29000 */
973 bfd_arch_sparc
, /* SPARC */
974 bfd_arch_mips
, /* MIPS Rxxxx */
975 bfd_arch_i386
, /* Intel 386 */
976 bfd_arch_we32k
, /* AT&T WE32xxx */
977 bfd_arch_tahoe
, /* CCI/Harris Tahoe */
978 bfd_arch_i860
, /* Intel 860 */
979 bfd_arch_romp
, /* IBM ROMP PC/RT */
980 bfd_arch_alliant
, /* Alliant */
981 bfd_arch_convex
, /* Convex */
982 bfd_arch_m88k
, /* Motorola 88xxx */
983 bfd_arch_pyramid
, /* Pyramid Technology */
984 bfd_arch_h8300
, /* Hitachi H8/300 */
985 #define bfd_mach_h8300 1
986 #define bfd_mach_h8300h 2
987 bfd_arch_powerpc
, /* PowerPC */
988 bfd_arch_rs6000
, /* IBM RS/6000 */
989 bfd_arch_hppa
, /* HP PA RISC */
990 bfd_arch_z8k
, /* Zilog Z8000 */
991 #define bfd_mach_z8001 1
992 #define bfd_mach_z8002 2
993 bfd_arch_h8500
, /* Hitachi H8/500 */
994 bfd_arch_sh
, /* Hitachi SH */
995 bfd_arch_alpha
, /* Dec Alpha */
999 typedef struct bfd_arch_info
1002 int bits_per_address
;
1004 enum bfd_architecture arch
;
1007 CONST
char *printable_name
;
1008 unsigned int section_align_power
;
1009 /* true if this is the default machine for the architecture */
1010 boolean the_default
;
1011 CONST
struct bfd_arch_info
* (*compatible
)
1012 PARAMS ((CONST
struct bfd_arch_info
*a
,
1013 CONST
struct bfd_arch_info
*b
));
1015 boolean (*scan
) PARAMS ((CONST
struct bfd_arch_info
*, CONST
char *));
1016 /* How to disassemble an instruction, producing a printable
1017 representation on a specified stdio stream. This isn't
1018 defined for most processors at present, because of the size
1019 of the additional tables it would drag in, and because gdb
1020 wants to use a different interface. */
1021 unsigned int (*disassemble
) PARAMS ((bfd_vma addr
, CONST
char *data
,
1024 struct bfd_arch_info
*next
;
1025 } bfd_arch_info_type
;
1027 bfd_printable_name
PARAMS ((bfd
*abfd
));
1029 bfd_arch_info_type
*
1030 bfd_scan_arch
PARAMS ((CONST
char *string
));
1032 CONST bfd_arch_info_type
*
1033 bfd_arch_get_compatible
PARAMS ((
1038 bfd_set_arch_info
PARAMS ((bfd
*abfd
, bfd_arch_info_type
*arg
));
1040 enum bfd_architecture
1041 bfd_get_arch
PARAMS ((bfd
*abfd
));
1044 bfd_get_mach
PARAMS ((bfd
*abfd
));
1047 bfd_arch_bits_per_byte
PARAMS ((bfd
*abfd
));
1050 bfd_arch_bits_per_address
PARAMS ((bfd
*abfd
));
1052 bfd_arch_info_type
*
1053 bfd_get_arch_info
PARAMS ((bfd
*abfd
));
1055 bfd_arch_info_type
*
1057 PARAMS ((enum bfd_architecture
1062 bfd_printable_arch_mach
1063 PARAMS ((enum bfd_architecture arch
, unsigned long machine
));
1065 typedef enum bfd_reloc_status
1067 /* No errors detected */
1070 /* The relocation was performed, but there was an overflow. */
1073 /* The address to relocate was not within the section supplied. */
1074 bfd_reloc_outofrange
,
1076 /* Used by special functions */
1079 /* Unsupported relocation size requested. */
1080 bfd_reloc_notsupported
,
1085 /* The symbol to relocate against was undefined. */
1086 bfd_reloc_undefined
,
1088 /* The relocation was performed, but may not be ok - presently
1089 generated only when linking i960 coff files with i960 b.out
1090 symbols. If this type is returned, the error_message argument
1091 to bfd_perform_relocation will be set. */
1094 bfd_reloc_status_type
;
1097 typedef struct reloc_cache_entry
1099 /* A pointer into the canonical table of pointers */
1100 struct symbol_cache_entry
**sym_ptr_ptr
;
1102 /* offset in section */
1103 bfd_size_type address
;
1105 /* addend for relocation value */
1108 /* Pointer to how to perform the required relocation */
1109 const struct reloc_howto_struct
*howto
;
1112 enum complain_overflow
1114 /* Do not complain on overflow. */
1115 complain_overflow_dont
,
1117 /* Complain if the bitfield overflows, whether it is considered
1118 as signed or unsigned. */
1119 complain_overflow_bitfield
,
1121 /* Complain if the value overflows when considered as signed
1123 complain_overflow_signed
,
1125 /* Complain if the value overflows when considered as an
1127 complain_overflow_unsigned
1130 typedef struct reloc_howto_struct
1132 /* The type field has mainly a documetary use - the back end can
1133 do what it wants with it, though normally the back end's
1134 external idea of what a reloc number is stored
1135 in this field. For example, a PC relative word relocation
1136 in a coff environment has the type 023 - because that's
1137 what the outside world calls a R_PCRWORD reloc. */
1140 /* The value the final relocation is shifted right by. This drops
1141 unwanted data from the relocation. */
1142 unsigned int rightshift
;
1144 /* The size of the item to be relocated. This is *not* a
1145 power-of-two measure. To get the number of bytes operated
1146 on by a type of relocation, use bfd_get_reloc_size. */
1149 /* The number of bits in the item to be relocated. This is used
1150 when doing overflow checking. */
1151 unsigned int bitsize
;
1153 /* Notes that the relocation is relative to the location in the
1154 data section of the addend. The relocation function will
1155 subtract from the relocation value the address of the location
1157 boolean pc_relative
;
1159 /* The bit position of the reloc value in the destination.
1160 The relocated value is left shifted by this amount. */
1161 unsigned int bitpos
;
1163 /* What type of overflow error should be checked for when
1165 enum complain_overflow complain_on_overflow
;
1167 /* If this field is non null, then the supplied function is
1168 called rather than the normal function. This allows really
1169 strange relocation methods to be accomodated (e.g., i960 callj
1171 bfd_reloc_status_type (*special_function
)
1173 arelent
*reloc_entry
,
1174 struct symbol_cache_entry
*symbol
,
1176 asection
*input_section
,
1178 char **error_message
));
1180 /* The textual name of the relocation type. */
1183 /* When performing a partial link, some formats must modify the
1184 relocations rather than the data - this flag signals this.*/
1185 boolean partial_inplace
;
1187 /* The src_mask selects which parts of the read in data
1188 are to be used in the relocation sum. E.g., if this was an 8 bit
1189 bit of data which we read and relocated, this would be
1190 0x000000ff. When we have relocs which have an addend, such as
1191 sun4 extended relocs, the value in the offset part of a
1192 relocating field is garbage so we never use it. In this case
1193 the mask would be 0x00000000. */
1196 /* The dst_mask selects which parts of the instruction are replaced
1197 into the instruction. In most cases src_mask == dst_mask,
1198 except in the above special case, where dst_mask would be
1199 0x000000ff, and src_mask would be 0x00000000. */
1202 /* When some formats create PC relative instructions, they leave
1203 the value of the pc of the place being relocated in the offset
1204 slot of the instruction, so that a PC relative relocation can
1205 be made just by adding in an ordinary offset (e.g., sun3 a.out).
1206 Some formats leave the displacement part of an instruction
1207 empty (e.g., m88k bcs); this flag signals the fact.*/
1208 boolean pcrel_offset
;
1211 #define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
1212 {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
1213 #define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
1215 #define HOWTO_PREPARE(relocation, symbol) \
1217 if (symbol != (asymbol *)NULL) { \
1218 if (bfd_is_com_section (symbol->section)) { \
1222 relocation = symbol->value; \
1227 bfd_get_reloc_size
PARAMS ((const reloc_howto_type
*));
1229 typedef unsigned char bfd_byte
;
1231 typedef struct relent_chain
{
1233 struct relent_chain
*next
;
1235 bfd_reloc_status_type
1237 bfd_perform_relocation
1239 arelent
*reloc_entry
,
1241 asection
*input_section
,
1243 char **error_message
));
1245 typedef enum bfd_reloc_code_real
1247 /* Basic absolute relocations */
1255 /* PC-relative relocations */
1258 BFD_RELOC_24_PCREL
, /* used by i960 */
1262 /* Linkage-table relative */
1263 BFD_RELOC_32_BASEREL
,
1264 BFD_RELOC_16_BASEREL
,
1265 BFD_RELOC_8_BASEREL
,
1267 /* The type of reloc used to build a contructor table - at the moment
1268 probably a 32 bit wide abs address, but the cpu can choose. */
1271 /* 8 bits wide, but used to form an address like 0xffnn */
1274 /* 32-bit pc-relative, shifted right 2 bits (i.e., 30-bit
1275 word displacement, e.g. for SPARC) */
1276 BFD_RELOC_32_PCREL_S2
,
1277 /* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) */
1278 BFD_RELOC_16_PCREL_S2
,
1279 /* this is used on the Alpha */
1280 BFD_RELOC_23_PCREL_S2
,
1282 /* High 22 bits of 32-bit value, placed into lower 22 bits of
1283 target word; simple reloc. */
1288 /* For systems that allocate a Global Pointer register, these are
1289 displacements off that register. These relocation types are
1290 handled specially, because the value the register will have is
1291 decided relatively late. */
1295 /* Reloc types used for i960/b.out. */
1296 BFD_RELOC_I960_CALLJ
,
1298 /* now for the sparc/elf codes */
1299 BFD_RELOC_NONE
, /* actually used */
1300 BFD_RELOC_SPARC_WDISP22
,
1303 BFD_RELOC_SPARC_GOT10
,
1304 BFD_RELOC_SPARC_GOT13
,
1305 BFD_RELOC_SPARC_GOT22
,
1306 BFD_RELOC_SPARC_PC10
,
1307 BFD_RELOC_SPARC_PC22
,
1308 BFD_RELOC_SPARC_WPLT30
,
1309 BFD_RELOC_SPARC_COPY
,
1310 BFD_RELOC_SPARC_GLOB_DAT
,
1311 BFD_RELOC_SPARC_JMP_SLOT
,
1312 BFD_RELOC_SPARC_RELATIVE
,
1313 BFD_RELOC_SPARC_UA32
,
1315 /* these are a.out specific? */
1316 BFD_RELOC_SPARC_BASE13
,
1317 BFD_RELOC_SPARC_BASE22
,
1319 /* start-sanitize-v9 */
1322 #define BFD_RELOC_SPARC_64 BFD_RELOC_64
1323 BFD_RELOC_SPARC_OLO10
,
1324 BFD_RELOC_SPARC_HH22
,
1325 BFD_RELOC_SPARC_HM10
,
1326 BFD_RELOC_SPARC_LM22
,
1327 BFD_RELOC_SPARC_PC_HH22
,
1328 BFD_RELOC_SPARC_PC_HM10
,
1329 BFD_RELOC_SPARC_PC_LM22
,
1330 BFD_RELOC_SPARC_WDISP16
,
1331 BFD_RELOC_SPARC_WDISP19
,
1332 BFD_RELOC_SPARC_GLOB_JMP
,
1333 BFD_RELOC_SPARC_LO7
,
1334 /* end-sanitize-v9 */
1336 /* Alpha ECOFF relocations. Some of these treat the symbol or "addend"
1337 in some special way. */
1338 /* For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1339 writing; when reading, it will be the absolute section symbol. The
1340 addend is the displacement in bytes of the "lda" instruction from
1341 the "ldah" instruction (which is at the address of this reloc). */
1342 BFD_RELOC_ALPHA_GPDISP_HI16
,
1343 /* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1344 with GPDISP_HI16 relocs. The addend is ignored when writing the
1345 relocations out, and is filled in with the file's GP value on
1346 reading, for convenience. */
1347 BFD_RELOC_ALPHA_GPDISP_LO16
,
1349 /* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1350 the assembler turns it into a LDQ instruction to load the address of
1351 the symbol, and then fills in a register in the real instruction.
1353 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1354 section symbol. The addend is ignored when writing, but is filled
1355 in with the file's GP value on reading, for convenience, as with the
1358 The LITUSE reloc, on the instruction using the loaded address, gives
1359 information to the linker that it might be able to use to optimize
1360 away some literal section references. The symbol is ignored (read
1361 as the absolute section symbol), and the "addend" indicates the type
1362 of instruction using the register:
1363 1 - "memory" fmt insn
1364 2 - byte-manipulation (byte offset reg)
1365 3 - jsr (target of branch)
1367 The GNU linker currently doesn't do any of this optimizing. */
1368 BFD_RELOC_ALPHA_LITERAL
,
1369 BFD_RELOC_ALPHA_LITUSE
,
1371 /* The HINT relocation indicates a value that should be filled into the
1372 "hint" field of a jmp/jsr/ret instruction, for possible branch-
1373 prediction logic which may be provided on some processors. */
1374 BFD_RELOC_ALPHA_HINT
,
1376 /* Bits 27..2 of the relocation address shifted right 2 bits;
1377 simple reloc otherwise. */
1380 /* High 16 bits of 32-bit value; simple reloc. */
1382 /* High 16 bits of 32-bit value but the low 16 bits will be sign
1383 extended and added to form the final result. If the low 16
1384 bits form a negative number, we need to add one to the high value
1385 to compensate for the borrow when the low bits are added. */
1389 /* Like BFD_RELOC_HI16_S, but PC relative. */
1390 BFD_RELOC_PCREL_HI16_S
,
1391 /* Like BFD_RELOC_LO16, but PC relative. */
1392 BFD_RELOC_PCREL_LO16
,
1394 /* relocation relative to the global pointer. */
1395 #define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
1397 /* Relocation against a MIPS literal section. */
1398 BFD_RELOC_MIPS_LITERAL
,
1400 /* MIPS ELF relocations. */
1401 BFD_RELOC_MIPS_GOT16
,
1402 BFD_RELOC_MIPS_CALL16
,
1403 #define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
1405 /* i386/elf relocations */
1406 BFD_RELOC_386_GOT32
,
1407 BFD_RELOC_386_PLT32
,
1409 BFD_RELOC_386_GLOB_DAT
,
1410 BFD_RELOC_386_JUMP_SLOT
,
1411 BFD_RELOC_386_RELATIVE
,
1412 BFD_RELOC_386_GOTOFF
,
1413 BFD_RELOC_386_GOTPC
,
1415 /* PowerPC/POWER (RS/6000) relocs. */
1416 /* 26 bit relative branch. Low two bits must be zero. High 24
1417 bits installed in bits 6 through 29 of instruction. */
1419 /* 26 bit absolute branch, like BFD_RELOC_PPC_B26 but absolute. */
1421 /* 16 bit TOC relative reference. */
1422 BFD_RELOC_PPC_TOC16
,
1424 /* this must be the highest numeric value */
1426 } bfd_reloc_code_real_type
;
1427 const struct reloc_howto_struct
*
1429 bfd_reloc_type_lookup
PARAMS ((bfd
*abfd
, bfd_reloc_code_real_type code
));
1432 typedef struct symbol_cache_entry
1434 /* A pointer to the BFD which owns the symbol. This information
1435 is necessary so that a back end can work out what additional
1436 information (invisible to the application writer) is carried
1439 This field is *almost* redundant, since you can use section->owner
1440 instead, except that some symbols point to the global sections
1441 bfd_{abs,com,und}_section. This could be fixed by making
1442 these globals be per-bfd (or per-target-flavor). FIXME. */
1444 struct _bfd
*the_bfd
; /* Use bfd_asymbol_bfd(sym) to access this field. */
1446 /* The text of the symbol. The name is left alone, and not copied; the
1447 application may not alter it. */
1450 /* The value of the symbol. This really should be a union of a
1451 numeric value with a pointer, since some flags indicate that
1452 a pointer to another symbol is stored here. */
1455 /* Attributes of a symbol: */
1457 #define BSF_NO_FLAGS 0x00
1459 /* The symbol has local scope; <<static>> in <<C>>. The value
1460 is the offset into the section of the data. */
1461 #define BSF_LOCAL 0x01
1463 /* The symbol has global scope; initialized data in <<C>>. The
1464 value is the offset into the section of the data. */
1465 #define BSF_GLOBAL 0x02
1467 /* The symbol has global scope and is exported. The value is
1468 the offset into the section of the data. */
1469 #define BSF_EXPORT BSF_GLOBAL /* no real difference */
1471 /* A normal C symbol would be one of:
1472 <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
1475 /* The symbol is a debugging record. The value has an arbitary
1477 #define BSF_DEBUGGING 0x08
1479 /* The symbol denotes a function entry point. Used in ELF,
1480 perhaps others someday. */
1481 #define BSF_FUNCTION 0x10
1483 /* Used by the linker. */
1484 #define BSF_KEEP 0x20
1485 #define BSF_KEEP_G 0x40
1487 /* A weak global symbol, overridable without warnings by
1488 a regular global symbol of the same name. */
1489 #define BSF_WEAK 0x80
1491 /* This symbol was created to point to a section, e.g. ELF's
1492 STT_SECTION symbols. */
1493 #define BSF_SECTION_SYM 0x100
1495 /* The symbol used to be a common symbol, but now it is
1497 #define BSF_OLD_COMMON 0x200
1499 /* The default value for common data. */
1500 #define BFD_FORT_COMM_DEFAULT_VALUE 0
1502 /* In some files the type of a symbol sometimes alters its
1503 location in an output file - ie in coff a <<ISFCN>> symbol
1504 which is also <<C_EXT>> symbol appears where it was
1505 declared and not at the end of a section. This bit is set
1506 by the target BFD part to convey this information. */
1508 #define BSF_NOT_AT_END 0x400
1510 /* Signal that the symbol is the label of constructor section. */
1511 #define BSF_CONSTRUCTOR 0x800
1513 /* Signal that the symbol is a warning symbol. If the symbol
1514 is a warning symbol, then the value field (I know this is
1515 tacky) will point to the asymbol which when referenced will
1516 cause the warning. */
1517 #define BSF_WARNING 0x1000
1519 /* Signal that the symbol is indirect. The value of the symbol
1520 is a pointer to an undefined asymbol which contains the
1521 name to use instead. */
1522 #define BSF_INDIRECT 0x2000
1524 /* BSF_FILE marks symbols that contain a file name. This is used
1525 for ELF STT_FILE symbols. */
1526 #define BSF_FILE 0x4000
1528 /* Symbol is from dynamic linking information. */
1529 #define BSF_DYNAMIC 0x8000
1533 /* A pointer to the section to which this symbol is
1534 relative. This will always be non NULL, there are special
1535 sections for undefined and absolute symbols */
1536 struct sec
*section
;
1538 /* Back end special data. This is being phased out in favour
1539 of making this a union. */
1543 #define bfd_get_symtab_upper_bound(abfd) \
1544 BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
1546 bfd_is_local_label
PARAMS ((bfd
*abfd
, asymbol
*sym
));
1548 #define bfd_is_local_label(abfd, sym) \
1549 BFD_SEND (abfd, _bfd_is_local_label,(abfd, sym))
1550 #define bfd_canonicalize_symtab(abfd, location) \
1551 BFD_SEND (abfd, _bfd_canonicalize_symtab,\
1554 bfd_set_symtab
PARAMS ((bfd
*abfd
, asymbol
**location
, unsigned int count
));
1557 bfd_print_symbol_vandf
PARAMS ((PTR file
, asymbol
*symbol
));
1559 #define bfd_make_empty_symbol(abfd) \
1560 BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
1561 #define bfd_make_debug_symbol(abfd,ptr,size) \
1562 BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
1564 bfd_decode_symclass
PARAMS ((asymbol
*symbol
));
1567 bfd_symbol_info
PARAMS ((asymbol
*symbol
, symbol_info
*ret
));
1571 /* The filename the application opened the BFD with. */
1572 CONST
char *filename
;
1574 /* A pointer to the target jump table. */
1575 struct bfd_target
*xvec
;
1577 /* To avoid dragging too many header files into every file that
1578 includes `<<bfd.h>>', IOSTREAM has been declared as a "char
1579 *", and MTIME as a "long". Their correct types, to which they
1580 are cast when used, are "FILE *" and "time_t". The iostream
1581 is the result of an fopen on the filename. */
1584 /* Is the file descriptor being cached? That is, can it be closed as
1585 needed, and re-opened when accessed later? */
1589 /* Marks whether there was a default target specified when the
1590 BFD was opened. This is used to select which matching algorithm
1591 to use to choose the back end. */
1593 boolean target_defaulted
;
1595 /* The caching routines use these to maintain a
1596 least-recently-used list of BFDs */
1598 struct _bfd
*lru_prev
, *lru_next
;
1600 /* When a file is closed by the caching routines, BFD retains
1601 state information on the file here: */
1605 /* and here: (``once'' means at least once) */
1607 boolean opened_once
;
1609 /* Set if we have a locally maintained mtime value, rather than
1610 getting it from the file each time: */
1614 /* File modified time, if mtime_set is true: */
1618 /* Reserved for an unimplemented file locking extension.*/
1622 /* The format which belongs to the BFD. (object, core, etc.) */
1626 /* The direction the BFD was opened with*/
1628 enum bfd_direction
{no_direction
= 0,
1630 write_direction
= 2,
1631 both_direction
= 3} direction
;
1633 /* Format_specific flags*/
1637 /* Currently my_archive is tested before adding origin to
1638 anything. I believe that this can become always an add of
1639 origin, with origin set to 0 for non archive files. */
1643 /* Remember when output has begun, to stop strange things
1645 boolean output_has_begun
;
1647 /* Pointer to linked list of sections*/
1648 struct sec
*sections
;
1650 /* The number of sections */
1651 unsigned int section_count
;
1653 /* Stuff only useful for object files:
1654 The start address. */
1655 bfd_vma start_address
;
1657 /* Used for input and output*/
1658 unsigned int symcount
;
1660 /* Symbol table for output BFD (with symcount entries) */
1661 struct symbol_cache_entry
**outsymbols
;
1663 /* Pointer to structure which contains architecture information*/
1664 struct bfd_arch_info
*arch_info
;
1666 /* Stuff only useful for archives:*/
1668 struct _bfd
*my_archive
; /* The containing archive BFD. */
1669 struct _bfd
*next
; /* The next BFD in the archive. */
1670 struct _bfd
*archive_head
; /* The first BFD in the archive. */
1673 /* A chain of BFD structures involved in a link. */
1674 struct _bfd
*link_next
;
1676 /* A field used by _bfd_generic_link_add_archive_symbols. This will
1677 be used only for archive elements. */
1680 /* Used by the back end to hold private data. */
1684 struct aout_data_struct
*aout_data
;
1685 struct artdata
*aout_ar_data
;
1686 struct _oasys_data
*oasys_obj_data
;
1687 struct _oasys_ar_data
*oasys_ar_data
;
1688 struct coff_tdata
*coff_obj_data
;
1689 struct ecoff_tdata
*ecoff_obj_data
;
1690 struct ieee_data_struct
*ieee_data
;
1691 struct ieee_ar_data_struct
*ieee_ar_data
;
1692 struct srec_data_struct
*srec_data
;
1693 struct tekhex_data_struct
*tekhex_data
;
1694 struct elf_obj_tdata
*elf_obj_data
;
1695 struct nlm_obj_tdata
*nlm_obj_data
;
1696 struct bout_data_struct
*bout_data
;
1697 struct sun_core_struct
*sun_core_data
;
1698 struct trad_core_struct
*trad_core_data
;
1699 struct som_data_struct
*som_data
;
1700 struct hpux_core_struct
*hpux_core_data
;
1701 struct hppabsd_core_struct
*hppabsd_core_data
;
1702 struct sgi_core_struct
*sgi_core_data
;
1703 struct lynx_core_struct
*lynx_core_data
;
1704 struct osf_core_struct
*osf_core_data
;
1705 struct cisco_core_struct
*cisco_core_data
;
1709 /* Used by the application to hold private data*/
1712 /* Where all the allocated stuff under this BFD goes */
1713 struct obstack memory
;
1716 typedef enum bfd_error
1718 bfd_error_no_error
= 0,
1719 bfd_error_system_call
,
1720 bfd_error_invalid_target
,
1721 bfd_error_wrong_format
,
1722 bfd_error_invalid_operation
,
1723 bfd_error_no_memory
,
1724 bfd_error_no_symbols
,
1725 bfd_error_no_more_archived_files
,
1726 bfd_error_malformed_archive
,
1727 bfd_error_file_not_recognized
,
1728 bfd_error_file_ambiguously_recognized
,
1729 bfd_error_no_contents
,
1730 bfd_error_nonrepresentable_section
,
1731 bfd_error_no_debug_section
,
1732 bfd_error_bad_value
,
1733 bfd_error_file_truncated
,
1734 bfd_error_invalid_error_code
1738 bfd_get_error
PARAMS ((void));
1741 bfd_set_error
PARAMS ((bfd_error_type error_tag
));
1744 bfd_errmsg
PARAMS ((bfd_error_type error_tag
));
1747 bfd_perror
PARAMS ((CONST
char *message
));
1750 bfd_get_reloc_upper_bound
PARAMS ((bfd
*abfd
, asection
*sect
));
1753 bfd_canonicalize_reloc
1761 PARAMS ((bfd
*abfd
, asection
*sec
, arelent
**rel
, unsigned int count
)
1766 bfd_set_file_flags
PARAMS ((bfd
*abfd
, flagword flags
));
1769 bfd_set_start_address
PARAMS ((bfd
*abfd
, bfd_vma vma
));
1772 bfd_get_mtime
PARAMS ((bfd
*abfd
));
1775 bfd_get_size
PARAMS ((bfd
*abfd
));
1778 bfd_get_gp_size
PARAMS ((bfd
*abfd
));
1781 bfd_set_gp_size
PARAMS ((bfd
*abfd
, int i
));
1784 bfd_scan_vma
PARAMS ((CONST
char *string
, CONST
char **end
, int base
));
1787 bfd_copy_private_bfd_data
PARAMS ((bfd
*ibfd
, bfd
*obfd
));
1789 #define bfd_copy_private_bfd_data(ibfd, obfd) \
1790 BFD_SEND (ibfd, _bfd_copy_private_bfd_data, \
1792 #define bfd_sizeof_headers(abfd, reloc) \
1793 BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
1795 #define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
1796 BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line))
1798 /* Do these three do anything useful at all, for any back end? */
1799 #define bfd_debug_info_start(abfd) \
1800 BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
1802 #define bfd_debug_info_end(abfd) \
1803 BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
1805 #define bfd_debug_info_accumulate(abfd, section) \
1806 BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
1809 #define bfd_stat_arch_elt(abfd, stat) \
1810 BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
1812 #define bfd_set_arch_mach(abfd, arch, mach)\
1813 BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
1815 #define bfd_get_relocated_section_contents(abfd, link_info, link_order, data, relocateable, symbols) \
1816 BFD_SEND (abfd, _bfd_get_relocated_section_contents, \
1817 (abfd, link_info, link_order, data, relocateable, symbols))
1819 #define bfd_relax_section(abfd, section, link_info, again) \
1820 BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
1822 #define bfd_link_hash_table_create(abfd) \
1823 BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
1825 #define bfd_link_add_symbols(abfd, info) \
1826 BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
1828 #define bfd_final_link(abfd, info) \
1829 BFD_SEND (abfd, _bfd_final_link, (abfd, info))
1831 #define bfd_free_cached_info(abfd) \
1832 BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
1834 #define bfd_get_dynamic_symtab_upper_bound(abfd) \
1835 BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
1837 #define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
1838 BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
1840 #define bfd_get_dynamic_reloc_upper_bound(abfd) \
1841 BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
1843 #define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
1844 BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
1847 bfd_get_next_mapent
PARAMS ((bfd
*abfd
, symindex previous
, carsym
**sym
));
1850 bfd_set_archive_head
PARAMS ((bfd
*output
, bfd
*new_head
));
1853 bfd_get_elt_at_index
PARAMS ((bfd
*archive
, int index
));
1856 bfd_openr_next_archived_file
PARAMS ((bfd
*archive
, bfd
*previous
));
1859 bfd_core_file_failing_command
PARAMS ((bfd
*abfd
));
1862 bfd_core_file_failing_signal
PARAMS ((bfd
*abfd
));
1865 core_file_matches_executable_p
1866 PARAMS ((bfd
*core_bfd
, bfd
*exec_bfd
));
1868 #define BFD_SEND(bfd, message, arglist) \
1869 ((*((bfd)->xvec->message)) arglist)
1871 #ifdef DEBUG_BFD_SEND
1873 #define BFD_SEND(bfd, message, arglist) \
1874 (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
1875 ((*((bfd)->xvec->message)) arglist) : \
1876 (bfd_assert (__FILE__,__LINE__), NULL))
1878 #define BFD_SEND_FMT(bfd, message, arglist) \
1879 (((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
1881 #ifdef DEBUG_BFD_SEND
1883 #define BFD_SEND_FMT(bfd, message, arglist) \
1884 (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
1885 (((bfd)->xvec->message[(int)((bfd)->format)]) arglist) : \
1886 (bfd_assert (__FILE__,__LINE__), NULL))
1889 bfd_target_unknown_flavour
,
1890 bfd_target_aout_flavour
,
1891 bfd_target_coff_flavour
,
1892 bfd_target_ecoff_flavour
,
1893 bfd_target_elf_flavour
,
1894 bfd_target_ieee_flavour
,
1895 bfd_target_nlm_flavour
,
1896 bfd_target_oasys_flavour
,
1897 bfd_target_tekhex_flavour
,
1898 bfd_target_srec_flavour
,
1899 bfd_target_som_flavour
,
1900 bfd_target_os9k_flavour
};
1902 /* Forward declaration. */
1903 typedef struct bfd_link_info _bfd_link_info
;
1905 typedef struct bfd_target
1908 enum bfd_flavour flavour
;
1909 boolean byteorder_big_p
;
1910 boolean header_byteorder_big_p
;
1911 flagword object_flags
;
1912 flagword section_flags
;
1913 char symbol_leading_char
;
1915 unsigned short ar_max_namelen
;
1916 unsigned int align_power_min
;
1917 bfd_vma (*bfd_getx64
) PARAMS ((const bfd_byte
*));
1918 bfd_signed_vma (*bfd_getx_signed_64
) PARAMS ((const bfd_byte
*));
1919 void (*bfd_putx64
) PARAMS ((bfd_vma
, bfd_byte
*));
1920 bfd_vma (*bfd_getx32
) PARAMS ((const bfd_byte
*));
1921 bfd_signed_vma (*bfd_getx_signed_32
) PARAMS ((const bfd_byte
*));
1922 void (*bfd_putx32
) PARAMS ((bfd_vma
, bfd_byte
*));
1923 bfd_vma (*bfd_getx16
) PARAMS ((const bfd_byte
*));
1924 bfd_signed_vma (*bfd_getx_signed_16
) PARAMS ((const bfd_byte
*));
1925 void (*bfd_putx16
) PARAMS ((bfd_vma
, bfd_byte
*));
1926 bfd_vma (*bfd_h_getx64
) PARAMS ((const bfd_byte
*));
1927 bfd_signed_vma (*bfd_h_getx_signed_64
) PARAMS ((const bfd_byte
*));
1928 void (*bfd_h_putx64
) PARAMS ((bfd_vma
, bfd_byte
*));
1929 bfd_vma (*bfd_h_getx32
) PARAMS ((const bfd_byte
*));
1930 bfd_signed_vma (*bfd_h_getx_signed_32
) PARAMS ((const bfd_byte
*));
1931 void (*bfd_h_putx32
) PARAMS ((bfd_vma
, bfd_byte
*));
1932 bfd_vma (*bfd_h_getx16
) PARAMS ((const bfd_byte
*));
1933 bfd_signed_vma (*bfd_h_getx_signed_16
) PARAMS ((const bfd_byte
*));
1934 void (*bfd_h_putx16
) PARAMS ((bfd_vma
, bfd_byte
*));
1935 struct bfd_target
* (*_bfd_check_format
[bfd_type_end
]) PARAMS ((bfd
*));
1936 boolean (*_bfd_set_format
[bfd_type_end
]) PARAMS ((bfd
*));
1937 boolean (*_bfd_write_contents
[bfd_type_end
]) PARAMS ((bfd
*));
1939 /* Generic entry points. */
1940 #define BFD_JUMP_TABLE_GENERIC(NAME)\
1941 CAT(NAME,_close_and_cleanup),\
1942 CAT(NAME,_bfd_free_cached_info),\
1943 CAT(NAME,_new_section_hook),\
1944 CAT(NAME,_get_section_contents)
1945 /* Called when the BFD is being closed to do any necessary cleanup. */
1946 boolean (*_close_and_cleanup
) PARAMS ((bfd
*));
1947 /* Ask the BFD to free all cached information. */
1948 boolean (*_bfd_free_cached_info
) PARAMS ((bfd
*));
1949 /* Called when a new section is created. */
1950 boolean (*_new_section_hook
) PARAMS ((bfd
*, sec_ptr
));
1951 /* Read the contents of a section. */
1952 boolean (*_bfd_get_section_contents
) PARAMS ((bfd
*, sec_ptr
, PTR
,
1953 file_ptr
, bfd_size_type
));
1955 /* Entry points to copy private data. */
1956 #define BFD_JUMP_TABLE_COPY(NAME)\
1957 CAT(NAME,_bfd_copy_private_bfd_data),\
1958 CAT(NAME,_bfd_copy_private_section_data)
1959 /* Called to copy BFD general private data from one object file
1961 boolean (*_bfd_copy_private_bfd_data
) PARAMS ((bfd
*, bfd
*));
1962 /* Called to copy BFD private section data from one object file
1964 boolean (*_bfd_copy_private_section_data
) PARAMS ((bfd
*, sec_ptr
,
1967 /* Core file entry points. */
1968 #define BFD_JUMP_TABLE_CORE(NAME)\
1969 CAT(NAME,_core_file_failing_command),\
1970 CAT(NAME,_core_file_failing_signal),\
1971 CAT(NAME,_core_file_matches_executable_p)
1972 char * (*_core_file_failing_command
) PARAMS ((bfd
*));
1973 int (*_core_file_failing_signal
) PARAMS ((bfd
*));
1974 boolean (*_core_file_matches_executable_p
) PARAMS ((bfd
*, bfd
*));
1976 /* Archive entry points. */
1977 #define BFD_JUMP_TABLE_ARCHIVE(NAME)\
1978 CAT(NAME,_slurp_armap),\
1979 CAT(NAME,_slurp_extended_name_table),\
1980 CAT(NAME,_truncate_arname),\
1981 CAT(NAME,_write_armap),\
1982 CAT(NAME,_openr_next_archived_file),\
1983 CAT(NAME,_generic_stat_arch_elt)
1984 boolean (*_bfd_slurp_armap
) PARAMS ((bfd
*));
1985 boolean (*_bfd_slurp_extended_name_table
) PARAMS ((bfd
*));
1986 void (*_bfd_truncate_arname
) PARAMS ((bfd
*, CONST
char *, char *));
1987 boolean (*write_armap
) PARAMS ((bfd
*arch
,
1988 unsigned int elength
,
1990 unsigned int orl_count
,
1992 bfd
* (*openr_next_archived_file
) PARAMS ((bfd
*arch
, bfd
*prev
));
1993 int (*_bfd_stat_arch_elt
) PARAMS ((bfd
*, struct stat
*));
1995 /* Entry points used for symbols. */
1996 #define BFD_JUMP_TABLE_SYMBOLS(NAME)\
1997 CAT(NAME,_get_symtab_upper_bound),\
1998 CAT(NAME,_get_symtab),\
1999 CAT(NAME,_make_empty_symbol),\
2000 CAT(NAME,_print_symbol),\
2001 CAT(NAME,_get_symbol_info),\
2002 CAT(NAME,_bfd_is_local_label),\
2003 CAT(NAME,_get_lineno),\
2004 CAT(NAME,_find_nearest_line),\
2005 CAT(NAME,_bfd_make_debug_symbol)
2006 long (*_bfd_get_symtab_upper_bound
) PARAMS ((bfd
*));
2007 long (*_bfd_canonicalize_symtab
) PARAMS ((bfd
*,
2008 struct symbol_cache_entry
**));
2009 struct symbol_cache_entry
*
2010 (*_bfd_make_empty_symbol
) PARAMS ((bfd
*));
2011 void (*_bfd_print_symbol
) PARAMS ((bfd
*, PTR
,
2012 struct symbol_cache_entry
*,
2013 bfd_print_symbol_type
));
2014 #define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
2015 void (*_bfd_get_symbol_info
) PARAMS ((bfd
*,
2016 struct symbol_cache_entry
*,
2018 #define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
2019 boolean (*_bfd_is_local_label
) PARAMS ((bfd
*, asymbol
*));
2021 alent
* (*_get_lineno
) PARAMS ((bfd
*, struct symbol_cache_entry
*));
2022 boolean (*_bfd_find_nearest_line
) PARAMS ((bfd
*abfd
,
2023 struct sec
*section
, struct symbol_cache_entry
**symbols
,
2024 bfd_vma offset
, CONST
char **file
, CONST
char **func
,
2025 unsigned int *line
));
2026 /* Back-door to allow format-aware applications to create debug symbols
2027 while using BFD for everything else. Currently used by the assembler
2028 when creating COFF files. */
2029 asymbol
* (*_bfd_make_debug_symbol
) PARAMS ((
2032 unsigned long size
));
2034 /* Routines for relocs. */
2035 #define BFD_JUMP_TABLE_RELOCS(NAME)\
2036 CAT(NAME,_get_reloc_upper_bound),\
2037 CAT(NAME,_canonicalize_reloc),\
2038 CAT(NAME,_bfd_reloc_type_lookup)
2039 long (*_get_reloc_upper_bound
) PARAMS ((bfd
*, sec_ptr
));
2040 long (*_bfd_canonicalize_reloc
) PARAMS ((bfd
*, sec_ptr
, arelent
**,
2041 struct symbol_cache_entry
**));
2042 /* See documentation on reloc types. */
2043 CONST
struct reloc_howto_struct
*
2044 (*reloc_type_lookup
) PARAMS ((bfd
*abfd
,
2045 bfd_reloc_code_real_type code
));
2047 /* Routines used when writing an object file. */
2048 #define BFD_JUMP_TABLE_WRITE(NAME)\
2049 CAT(NAME,_set_arch_mach),\
2050 CAT(NAME,_set_section_contents)
2051 boolean (*_bfd_set_arch_mach
) PARAMS ((bfd
*, enum bfd_architecture
,
2053 boolean (*_bfd_set_section_contents
) PARAMS ((bfd
*, sec_ptr
, PTR
,
2054 file_ptr
, bfd_size_type
));
2056 /* Routines used by the linker. */
2057 #define BFD_JUMP_TABLE_LINK(NAME)\
2058 CAT(NAME,_sizeof_headers),\
2059 CAT(NAME,_bfd_get_relocated_section_contents),\
2060 CAT(NAME,_bfd_relax_section),\
2061 CAT(NAME,_bfd_link_hash_table_create),\
2062 CAT(NAME,_bfd_link_add_symbols),\
2063 CAT(NAME,_bfd_final_link)
2064 int (*_bfd_sizeof_headers
) PARAMS ((bfd
*, boolean
));
2065 bfd_byte
* (*_bfd_get_relocated_section_contents
) PARAMS ((bfd
*,
2066 struct bfd_link_info
*, struct bfd_link_order
*,
2067 bfd_byte
*data
, boolean relocateable
,
2068 struct symbol_cache_entry
**));
2070 boolean (*_bfd_relax_section
) PARAMS ((bfd
*, struct sec
*,
2071 struct bfd_link_info
*, boolean
*again
));
2073 /* Create a hash table for the linker. Different backends store
2074 different information in this table. */
2075 struct bfd_link_hash_table
*(*_bfd_link_hash_table_create
) PARAMS ((bfd
*));
2077 /* Add symbols from this object file into the hash table. */
2078 boolean (*_bfd_link_add_symbols
) PARAMS ((bfd
*, struct bfd_link_info
*));
2080 /* Do a link based on the link_order structures attached to each
2081 section of the BFD. */
2082 boolean (*_bfd_final_link
) PARAMS ((bfd
*, struct bfd_link_info
*));
2084 /* Routines to handle dynamic symbols and relocs. */
2085 #define BFD_JUMP_TABLE_DYNAMIC(NAME)\
2086 CAT(NAME,_get_dynamic_symtab_upper_bound),\
2087 CAT(NAME,_canonicalize_dynamic_symtab),\
2088 CAT(NAME,_get_dynamic_reloc_upper_bound),\
2089 CAT(NAME,_canonicalize_dynamic_reloc)
2090 /* Get the amount of memory required to hold the dynamic symbols. */
2091 long (*_bfd_get_dynamic_symtab_upper_bound
) PARAMS ((bfd
*));
2092 /* Read in the dynamic symbols. */
2093 long (*_bfd_canonicalize_dynamic_symtab
)
2094 PARAMS ((bfd
*, struct symbol_cache_entry
**));
2095 /* Get the amount of memory required to hold the dynamic relocs. */
2096 long (*_bfd_get_dynamic_reloc_upper_bound
) PARAMS ((bfd
*));
2097 /* Read in the dynamic relocs. */
2098 long (*_bfd_canonicalize_dynamic_reloc
)
2099 PARAMS ((bfd
*, arelent
**, struct symbol_cache_entry
**));
2104 bfd_find_target
PARAMS ((CONST
char *target_name
, bfd
*abfd
));
2107 bfd_target_list
PARAMS ((void));
2110 bfd_check_format
PARAMS ((bfd
*abfd
, bfd_format format
));
2113 bfd_check_format_matches
PARAMS ((bfd
*abfd
, bfd_format format
, char ***matching
));
2116 bfd_set_format
PARAMS ((bfd
*abfd
, bfd_format format
));
2119 bfd_format_string
PARAMS ((bfd_format format
));