bfd/bfd-in2.h

   1 /* Main header file for the bfd library -- portable access to object files.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001
   4    Free Software Foundation, Inc.
   5    Contributed by Cygnus Support.
   6
   7 ** NOTE: bfd.h and bfd-in2.h are GENERATED files.  Don't change them;
   8 ** instead, change bfd-in.h or the other BFD source files processed to
   9 ** generate these files.
  10
  11 This file is part of BFD, the Binary File Descriptor library.
  12
  13 This program is free software; you can redistribute it and/or modify
  14 it under the terms of the GNU General Public License as published by
  15 the Free Software Foundation; either version 2 of the License, or
  16 (at your option) any later version.
  17
  18 This program is distributed in the hope that it will be useful,
  19 but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21 GNU General Public License for more details.
  22
  23 You should have received a copy of the GNU General Public License
  24 along with this program; if not, write to the Free Software
  25 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  26
  27 /* bfd.h -- The only header file required by users of the bfd library
  28
  29 The bfd.h file is generated from bfd-in.h and various .c files; if you
  30 change it, your changes will probably be lost.
  31
  32 All the prototypes and definitions following the comment "THE FOLLOWING
  33 IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
  34 BFD.  If you change it, someone oneday will extract it from the source
  35 again, and your changes will be lost.  To save yourself from this bind,
  36 change the definitions in the source in the bfd directory.  Type "make
  37 docs" and then "make headers" in that directory, and magically this file
  38 will change to reflect your changes.
  39
  40 If you don't have the tools to perform the extraction, then you are
  41 safe from someone on your system trampling over your header files.
  42 You should still maintain the equivalence between the source and this
  43 file though; every change you make to the .c file should be reflected
  44 here.  */
  45
  46 #ifndef __BFD_H_SEEN__
  47 #define __BFD_H_SEEN__
  48
  49 #ifdef __cplusplus
  50 extern "C" {
  51 #endif
  52
  53 #include "ansidecl.h"
  54
  55 #define BFD_VERSION  "@VERSION@"
  56
  57 /* The word size used by BFD on the host.  This may be 64 with a 32
  58    bit target if the host is 64 bit, or if other 64 bit targets have
  59    been selected with --enable-targets, or if --enable-64-bit-bfd.  */
  60 #define BFD_ARCH_SIZE @wordsize@
  61
  62 /* The word size of the default bfd target.  */
  63 #define BFD_DEFAULT_TARGET_SIZE @bfd_default_target_size@
  64
  65 #define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
  66 #if @BFD_HOST_64_BIT_DEFINED@
  67 #define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
  68 #define BFD_HOST_U_64_BIT @BFD_HOST_U_64_BIT@
  69 #endif
  70
  71 #if BFD_ARCH_SIZE >= 64
  72 #define BFD64
  73 #endif
  74
  75 #ifndef INLINE
  76 #if __GNUC__ >= 2
  77 #define INLINE __inline__
  78 #else
  79 #define INLINE
  80 #endif
  81 #endif
  82
  83 /* forward declaration */
  84 typedef struct _bfd bfd;
  85
  86 /* To squelch erroneous compiler warnings ("illegal pointer
  87    combination") from the SVR3 compiler, we would like to typedef
  88    boolean to int (it doesn't like functions which return boolean.
  89    Making sure they are never implicitly declared to return int
  90    doesn't seem to help).  But this file is not configured based on
  91    the host.  */
  92 /* General rules: functions which are boolean return true on success
  93    and false on failure (unless they're a predicate).   -- bfd.doc */
  94 /* I'm sure this is going to break something and someone is going to
  95    force me to change it.  */
  96 /* typedef enum boolean {false, true} boolean; */
  97 /* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h>  -fnf */
  98 /* It gets worse if the host also defines a true/false enum... -sts */
  99 /* And even worse if your compiler has built-in boolean types... -law */
 100 #if defined (__GNUG__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6))
 101 #define TRUE_FALSE_ALREADY_DEFINED
 102 #endif
 103 #ifdef MPW
 104 /* Pre-emptive strike - get the file with the enum.  */
 105 #include <Types.h>
 106 #define TRUE_FALSE_ALREADY_DEFINED
 107 #endif /* MPW */
 108 #ifndef TRUE_FALSE_ALREADY_DEFINED
 109 typedef enum bfd_boolean {false, true} boolean;
 110 #define BFD_TRUE_FALSE
 111 #else
 112 /* Use enum names that will appear nowhere else.  */
 113 typedef enum bfd_boolean {bfd_fffalse, bfd_tttrue} boolean;
 114 #endif
 115
 116 /* A pointer to a position in a file.  */
 117 /* FIXME:  This should be using off_t from <sys/types.h>.
 118    For now, try to avoid breaking stuff by not including <sys/types.h> here.
 119    This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
 120    Probably the best long-term answer is to avoid using file_ptr AND off_t
 121    in this header file, and to handle this in the BFD implementation
 122    rather than in its interface.  */
 123 /* typedef off_t        file_ptr; */
 124 typedef long int file_ptr;
 125
 126 /* Support for different sizes of target format ints and addresses.
 127    If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be
 128    set to 1 above.  Otherwise, if gcc is being used, this code will
 129    use gcc's "long long" type.  Otherwise, BFD_HOST_64_BIT must be
 130    defined above.  */
 131
 132 #ifndef BFD_HOST_64_BIT
 133 # if BFD_HOST_64BIT_LONG
 134 #  define BFD_HOST_64_BIT long
 135 #  define BFD_HOST_U_64_BIT unsigned long
 136 # else
 137 #  ifdef __GNUC__
 138 #   if __GNUC__ >= 2
 139 #    define BFD_HOST_64_BIT long long
 140 #    define BFD_HOST_U_64_BIT unsigned long long
 141 #   endif /* __GNUC__ >= 2 */
 142 #  endif /* ! defined (__GNUC__) */
 143 # endif /* ! BFD_HOST_64BIT_LONG */
 144 #endif /* ! defined (BFD_HOST_64_BIT) */
 145
 146 #ifdef BFD64
 147
 148 #ifndef BFD_HOST_64_BIT
 149  #error No 64 bit integer type available
 150 #endif /* ! defined (BFD_HOST_64_BIT) */
 151
 152 typedef BFD_HOST_U_64_BIT bfd_vma;
 153 typedef BFD_HOST_64_BIT bfd_signed_vma;
 154 typedef BFD_HOST_U_64_BIT bfd_size_type;
 155 typedef BFD_HOST_U_64_BIT symvalue;
 156
 157 #ifndef fprintf_vma
 158 #if BFD_HOST_64BIT_LONG
 159 #define sprintf_vma(s,x) sprintf (s, "%016lx", x)
 160 #define fprintf_vma(f,x) fprintf (f, "%016lx", x)
 161 #else
 162 #define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
 163 #define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
 164 #define fprintf_vma(s,x) \
 165   fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
 166 #define sprintf_vma(s,x) \
 167   sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
 168 #endif
 169 #endif
 170
 171 #else /* not BFD64  */
 172
 173 /* Represent a target address.  Also used as a generic unsigned type
 174    which is guaranteed to be big enough to hold any arithmetic types
 175    we need to deal with.  */
 176 typedef unsigned long bfd_vma;
 177
 178 /* A generic signed type which is guaranteed to be big enough to hold any
 179    arithmetic types we need to deal with.  Can be assumed to be compatible
 180    with bfd_vma in the same way that signed and unsigned ints are compatible
 181    (as parameters, in assignment, etc).  */
 182 typedef long bfd_signed_vma;
 183
 184 typedef unsigned long symvalue;
 185 typedef unsigned long bfd_size_type;
 186
 187 /* Print a bfd_vma x on stream s.  */
 188 #define fprintf_vma(s,x) fprintf (s, "%08lx", x)
 189 #define sprintf_vma(s,x) sprintf (s, "%08lx", x)
 190
 191 #endif /* not BFD64  */
 192
 193 extern void bfd_sprintf_vma PARAMS ((bfd *, char *, bfd_vma));
 194 extern void bfd_fprintf_vma PARAMS ((bfd *, PTR, bfd_vma));
 195
 196 #define printf_vma(x) fprintf_vma(stdout,x)
 197 #define bfd_printf_vma(abfd,x) bfd_fprintf_vma (abfd,stdout,x)
 198
 199 typedef unsigned int flagword;  /* 32 bits of flags */
 200 typedef unsigned char bfd_byte;
 201 \f
 202 /** File formats */
 203
 204 typedef enum bfd_format {
 205               bfd_unknown = 0,  /* file format is unknown */
 206               bfd_object,       /* linker/assember/compiler output */
 207               bfd_archive,      /* object archive file */
 208               bfd_core,         /* core dump */
 209               bfd_type_end}     /* marks the end; don't use it! */
 210          bfd_format;
 211
 212 /* Values that may appear in the flags field of a BFD.  These also
 213    appear in the object_flags field of the bfd_target structure, where
 214    they indicate the set of flags used by that backend (not all flags
 215    are meaningful for all object file formats) (FIXME: at the moment,
 216    the object_flags values have mostly just been copied from backend
 217    to another, and are not necessarily correct).  */
 218
 219 /* No flags.  */
 220 #define BFD_NO_FLAGS    0x00
 221
 222 /* BFD contains relocation entries.  */
 223 #define HAS_RELOC       0x01
 224
 225 /* BFD is directly executable.  */
 226 #define EXEC_P          0x02
 227
 228 /* BFD has line number information (basically used for F_LNNO in a
 229    COFF header).  */
 230 #define HAS_LINENO      0x04
 231
 232 /* BFD has debugging information.  */
 233 #define HAS_DEBUG       0x08
 234
 235 /* BFD has symbols.  */
 236 #define HAS_SYMS        0x10
 237
 238 /* BFD has local symbols (basically used for F_LSYMS in a COFF
 239    header).  */
 240 #define HAS_LOCALS      0x20
 241
 242 /* BFD is a dynamic object.  */
 243 #define DYNAMIC         0x40
 244
 245 /* Text section is write protected (if D_PAGED is not set, this is
 246    like an a.out NMAGIC file) (the linker sets this by default, but
 247    clears it for -r or -N).  */
 248 #define WP_TEXT         0x80
 249
 250 /* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
 251    linker sets this by default, but clears it for -r or -n or -N).  */
 252 #define D_PAGED         0x100
 253
 254 /* BFD is relaxable (this means that bfd_relax_section may be able to
 255    do something) (sometimes bfd_relax_section can do something even if
 256    this is not set).  */
 257 #define BFD_IS_RELAXABLE 0x200
 258
 259 /* This may be set before writing out a BFD to request using a
 260    traditional format.  For example, this is used to request that when
 261    writing out an a.out object the symbols not be hashed to eliminate
 262    duplicates.  */
 263 #define BFD_TRADITIONAL_FORMAT 0x400
 264
 265 /* This flag indicates that the BFD contents are actually cached in
 266    memory.  If this is set, iostream points to a bfd_in_memory struct.  */
 267 #define BFD_IN_MEMORY 0x800
 268 \f
 269 /* symbols and relocation */
 270
 271 /* A count of carsyms (canonical archive symbols).  */
 272 typedef unsigned long symindex;
 273
 274 /* How to perform a relocation.  */
 275 typedef const struct reloc_howto_struct reloc_howto_type;
 276
 277 #define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
 278
 279 /* General purpose part of a symbol X;
 280    target specific parts are in libcoff.h, libaout.h, etc.  */
 281
 282 #define bfd_get_section(x) ((x)->section)
 283 #define bfd_get_output_section(x) ((x)->section->output_section)
 284 #define bfd_set_section(x,y) ((x)->section) = (y)
 285 #define bfd_asymbol_base(x) ((x)->section->vma)
 286 #define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
 287 #define bfd_asymbol_name(x) ((x)->name)
 288 /*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
 289 #define bfd_asymbol_bfd(x) ((x)->the_bfd)
 290 #define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
 291
 292 /* A canonical archive symbol.  */
 293 /* This is a type pun with struct ranlib on purpose! */
 294 typedef struct carsym {
 295   char *name;
 296   file_ptr file_offset;         /* look here to find the file */
 297 } carsym;                       /* to make these you call a carsymogen */
 298
 299 /* Used in generating armaps (archive tables of contents).
 300    Perhaps just a forward definition would do? */
 301 struct orl {                    /* output ranlib */
 302   char **name;                  /* symbol name */
 303   file_ptr pos;                 /* bfd* or file position */
 304   int namidx;                   /* index into string table */
 305 };
 306 \f
 307 /* Linenumber stuff */
 308 typedef struct lineno_cache_entry {
 309   unsigned int line_number;     /* Linenumber from start of function*/
 310   union {
 311     struct symbol_cache_entry *sym; /* Function name */
 312     bfd_vma offset;         /* Offset into section */
 313   } u;
 314 } alent;
 315 \f
 316 /* object and core file sections */
 317
 318 #define align_power(addr, align)        \
 319         ( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
 320
 321 typedef struct sec *sec_ptr;
 322
 323 #define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
 324 #define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
 325 #define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
 326 #define bfd_section_name(bfd, ptr) ((ptr)->name)
 327 #define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
 328 #define bfd_section_vma(bfd, ptr) ((ptr)->vma)
 329 #define bfd_section_lma(bfd, ptr) ((ptr)->lma)
 330 #define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
 331 #define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
 332 #define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
 333
 334 #define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
 335
 336 #define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true)
 337 #define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
 338 #define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
 339
 340 typedef struct stat stat_type;
 341 \f
 342 typedef enum bfd_print_symbol
 343 {
 344   bfd_print_symbol_name,
 345   bfd_print_symbol_more,
 346   bfd_print_symbol_all
 347 } bfd_print_symbol_type;
 348
 349 /* Information about a symbol that nm needs.  */
 350
 351 typedef struct _symbol_info
 352 {
 353   symvalue value;
 354   char type;
 355   CONST char *name;            /* Symbol name.  */
 356   unsigned char stab_type;     /* Stab type.  */
 357   char stab_other;             /* Stab other.  */
 358   short stab_desc;             /* Stab desc.  */
 359   CONST char *stab_name;       /* String for stab type.  */
 360 } symbol_info;
 361
 362 /* Get the name of a stabs type code.  */
 363
 364 extern const char *bfd_get_stab_name PARAMS ((int));
 365 \f
 366 /* Hash table routines.  There is no way to free up a hash table.  */
 367
 368 /* An element in the hash table.  Most uses will actually use a larger
 369    structure, and an instance of this will be the first field.  */
 370
 371 struct bfd_hash_entry
 372 {
 373   /* Next entry for this hash code.  */
 374   struct bfd_hash_entry *next;
 375   /* String being hashed.  */
 376   const char *string;
 377   /* Hash code.  This is the full hash code, not the index into the
 378      table.  */
 379   unsigned long hash;
 380 };
 381
 382 /* A hash table.  */
 383
 384 struct bfd_hash_table
 385 {
 386   /* The hash array.  */
 387   struct bfd_hash_entry **table;
 388   /* The number of slots in the hash table.  */
 389   unsigned int size;
 390   /* A function used to create new elements in the hash table.  The
 391      first entry is itself a pointer to an element.  When this
 392      function is first invoked, this pointer will be NULL.  However,
 393      having the pointer permits a hierarchy of method functions to be
 394      built each of which calls the function in the superclass.  Thus
 395      each function should be written to allocate a new block of memory
 396      only if the argument is NULL.  */
 397   struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
 398                                              struct bfd_hash_table *,
 399                                              const char *));
 400    /* An objalloc for this hash table.  This is a struct objalloc *,
 401      but we use PTR to avoid requiring the inclusion of objalloc.h.  */
 402   PTR memory;
 403 };
 404
 405 /* Initialize a hash table.  */
 406 extern boolean bfd_hash_table_init
 407   PARAMS ((struct bfd_hash_table *,
 408            struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
 409                                        struct bfd_hash_table *,
 410                                        const char *)));
 411
 412 /* Initialize a hash table specifying a size.  */
 413 extern boolean bfd_hash_table_init_n
 414   PARAMS ((struct bfd_hash_table *,
 415            struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
 416                                        struct bfd_hash_table *,
 417                                        const char *),
 418            unsigned int size));
 419
 420 /* Free up a hash table.  */
 421 extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *));
 422
 423 /* Look up a string in a hash table.  If CREATE is true, a new entry
 424    will be created for this string if one does not already exist.  The
 425    COPY argument must be true if this routine should copy the string
 426    into newly allocated memory when adding an entry.  */
 427 extern struct bfd_hash_entry *bfd_hash_lookup
 428   PARAMS ((struct bfd_hash_table *, const char *, boolean create,
 429            boolean copy));
 430
 431 /* Replace an entry in a hash table.  */
 432 extern void bfd_hash_replace
 433   PARAMS ((struct bfd_hash_table *, struct bfd_hash_entry *old,
 434            struct bfd_hash_entry *nw));
 435
 436 /* Base method for creating a hash table entry.  */
 437 extern struct bfd_hash_entry *bfd_hash_newfunc
 438   PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *,
 439            const char *));
 440
 441 /* Grab some space for a hash table entry.  */
 442 extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *,
 443                                       unsigned int));
 444
 445 /* Traverse a hash table in a random order, calling a function on each
 446    element.  If the function returns false, the traversal stops.  The
 447    INFO argument is passed to the function.  */
 448 extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *,
 449                                        boolean (*) (struct bfd_hash_entry *,
 450                                                     PTR),
 451                                        PTR info));
 452 \f
 453 /* Semi-portable string concatenation in cpp.
 454    The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
 455    The problem is, "32_" is not a valid preprocessing token, and we don't
 456    want extra underscores (e.g., "nlm_32_").  The XCAT2 macro will cause the
 457    inner CAT macros to be evaluated first, producing still-valid pp-tokens.
 458    Then the final concatenation can be done.  (Sigh.)  */
 459 #ifndef CAT
 460 #ifdef SABER
 461 #define CAT(a,b)        a##b
 462 #define CAT3(a,b,c)     a##b##c
 463 #define CAT4(a,b,c,d)   a##b##c##d
 464 #else
 465 #if defined(__STDC__) || defined(ALMOST_STDC)
 466 #define CAT(a,b) a##b
 467 #define CAT3(a,b,c) a##b##c
 468 #define XCAT2(a,b)      CAT(a,b)
 469 #define CAT4(a,b,c,d)   XCAT2(CAT(a,b),CAT(c,d))
 470 #else
 471 #define CAT(a,b) a/**/b
 472 #define CAT3(a,b,c) a/**/b/**/c
 473 #define CAT4(a,b,c,d)   a/**/b/**/c/**/d
 474 #endif
 475 #endif
 476 #endif
 477
 478 #define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
 479 \f
 480 /* User program access to BFD facilities */
 481
 482 /* Direct I/O routines, for programs which know more about the object
 483    file than BFD does.  Use higher level routines if possible.  */
 484
 485 extern bfd_size_type bfd_read
 486   PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
 487 extern bfd_size_type bfd_write
 488   PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
 489 extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction));
 490 extern long bfd_tell PARAMS ((bfd *abfd));
 491 extern int bfd_flush PARAMS ((bfd *abfd));
 492 extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
 493
 494 /* Cast from const char * to char * so that caller can assign to
 495    a char * without a warning.  */
 496 #define bfd_get_filename(abfd) ((char *) (abfd)->filename)
 497 #define bfd_get_cacheable(abfd) ((abfd)->cacheable)
 498 #define bfd_get_format(abfd) ((abfd)->format)
 499 #define bfd_get_target(abfd) ((abfd)->xvec->name)
 500 #define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
 501 #define bfd_family_coff(abfd) \
 502   (bfd_get_flavour (abfd) == bfd_target_coff_flavour || \
 503    bfd_get_flavour (abfd) == bfd_target_xcoff_flavour)
 504 #define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG)
 505 #define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE)
 506 #define bfd_header_big_endian(abfd) \
 507   ((abfd)->xvec->header_byteorder == BFD_ENDIAN_BIG)
 508 #define bfd_header_little_endian(abfd) \
 509   ((abfd)->xvec->header_byteorder == BFD_ENDIAN_LITTLE)
 510 #define bfd_get_file_flags(abfd) ((abfd)->flags)
 511 #define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
 512 #define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
 513 #define bfd_my_archive(abfd) ((abfd)->my_archive)
 514 #define bfd_has_map(abfd) ((abfd)->has_armap)
 515
 516 #define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
 517 #define bfd_usrdata(abfd) ((abfd)->usrdata)
 518
 519 #define bfd_get_start_address(abfd) ((abfd)->start_address)
 520 #define bfd_get_symcount(abfd) ((abfd)->symcount)
 521 #define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
 522 #define bfd_count_sections(abfd) ((abfd)->section_count)
 523
 524 #define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
 525
 526 #define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean) (bool)), true)
 527
 528 extern boolean bfd_cache_close PARAMS ((bfd *abfd));
 529 /* NB: This declaration should match the autogenerated one in libbfd.h.  */
 530
 531 extern boolean bfd_record_phdr
 532   PARAMS ((bfd *, unsigned long, boolean, flagword, boolean, bfd_vma,
 533            boolean, boolean, unsigned int, struct sec **));
 534
 535 /* Byte swapping routines.  */
 536
 537 bfd_vma         bfd_getb64         PARAMS ((const unsigned char *));
 538 bfd_vma         bfd_getl64         PARAMS ((const unsigned char *));
 539 bfd_signed_vma  bfd_getb_signed_64 PARAMS ((const unsigned char *));
 540 bfd_signed_vma  bfd_getl_signed_64 PARAMS ((const unsigned char *));
 541 bfd_vma         bfd_getb32         PARAMS ((const unsigned char *));
 542 bfd_vma         bfd_getl32         PARAMS ((const unsigned char *));
 543 bfd_signed_vma  bfd_getb_signed_32 PARAMS ((const unsigned char *));
 544 bfd_signed_vma  bfd_getl_signed_32 PARAMS ((const unsigned char *));
 545 bfd_vma         bfd_getb16         PARAMS ((const unsigned char *));
 546 bfd_vma         bfd_getl16         PARAMS ((const unsigned char *));
 547 bfd_signed_vma  bfd_getb_signed_16 PARAMS ((const unsigned char *));
 548 bfd_signed_vma  bfd_getl_signed_16 PARAMS ((const unsigned char *));
 549 void            bfd_putb64         PARAMS ((bfd_vma, unsigned char *));
 550 void            bfd_putl64         PARAMS ((bfd_vma, unsigned char *));
 551 void            bfd_putb32         PARAMS ((bfd_vma, unsigned char *));
 552 void            bfd_putl32         PARAMS ((bfd_vma, unsigned char *));
 553 void            bfd_putb16         PARAMS ((bfd_vma, unsigned char *));
 554 void            bfd_putl16         PARAMS ((bfd_vma, unsigned char *));
 555
 556 /* Byte swapping routines which take size and endiannes as arguments.  */
 557
 558 bfd_vma         bfd_get_bits       PARAMS ((bfd_byte *, int, boolean));
 559 void            bfd_put_bits       PARAMS ((bfd_vma, bfd_byte *, int, boolean));
 560 \f
 561 /* Externally visible ECOFF routines.  */
 562
 563 #if defined(__STDC__) || defined(ALMOST_STDC)
 564 struct ecoff_debug_info;
 565 struct ecoff_debug_swap;
 566 struct ecoff_extr;
 567 struct symbol_cache_entry;
 568 struct bfd_link_info;
 569 struct bfd_link_hash_entry;
 570 struct bfd_elf_version_tree;
 571 #endif
 572 extern bfd_vma bfd_ecoff_get_gp_value PARAMS ((bfd * abfd));
 573 extern boolean bfd_ecoff_set_gp_value PARAMS ((bfd *abfd, bfd_vma gp_value));
 574 extern boolean bfd_ecoff_set_regmasks
 575   PARAMS ((bfd *abfd, unsigned long gprmask, unsigned long fprmask,
 576            unsigned long *cprmask));
 577 extern PTR bfd_ecoff_debug_init
 578   PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug,
 579            const struct ecoff_debug_swap *output_swap,
 580            struct bfd_link_info *));
 581 extern void bfd_ecoff_debug_free
 582   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 583            const struct ecoff_debug_swap *output_swap,
 584            struct bfd_link_info *));
 585 extern boolean bfd_ecoff_debug_accumulate
 586   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 587            const struct ecoff_debug_swap *output_swap,
 588            bfd *input_bfd, struct ecoff_debug_info *input_debug,
 589            const struct ecoff_debug_swap *input_swap,
 590            struct bfd_link_info *));
 591 extern boolean bfd_ecoff_debug_accumulate_other
 592   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 593            const struct ecoff_debug_swap *output_swap, bfd *input_bfd,
 594            struct bfd_link_info *));
 595 extern boolean bfd_ecoff_debug_externals
 596   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 597            const struct ecoff_debug_swap *swap,
 598            boolean relocateable,
 599            boolean (*get_extr) (struct symbol_cache_entry *,
 600                                 struct ecoff_extr *),
 601            void (*set_index) (struct symbol_cache_entry *,
 602                               bfd_size_type)));
 603 extern boolean bfd_ecoff_debug_one_external
 604   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 605            const struct ecoff_debug_swap *swap,
 606            const char *name, struct ecoff_extr *esym));
 607 extern bfd_size_type bfd_ecoff_debug_size
 608   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 609            const struct ecoff_debug_swap *swap));
 610 extern boolean bfd_ecoff_write_debug
 611   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 612            const struct ecoff_debug_swap *swap, file_ptr where));
 613 extern boolean bfd_ecoff_write_accumulated_debug
 614   PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug,
 615            const struct ecoff_debug_swap *swap,
 616            struct bfd_link_info *info, file_ptr where));
 617 extern boolean bfd_mips_ecoff_create_embedded_relocs
 618   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 619            char **));
 620
 621 /* Externally visible ELF routines.  */
 622
 623 struct bfd_link_needed_list
 624 {
 625   struct bfd_link_needed_list *next;
 626   bfd *by;
 627   const char *name;
 628 };
 629
 630 extern boolean bfd_elf32_record_link_assignment
 631   PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
 632 extern boolean bfd_elf64_record_link_assignment
 633   PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
 634 extern struct bfd_link_needed_list *bfd_elf_get_needed_list
 635   PARAMS ((bfd *, struct bfd_link_info *));
 636 extern boolean bfd_elf_get_bfd_needed_list
 637   PARAMS ((bfd *, struct bfd_link_needed_list **));
 638 extern boolean bfd_elf32_size_dynamic_sections
 639   PARAMS ((bfd *, const char *, const char *, const char *,
 640            const char * const *, struct bfd_link_info *, struct sec **,
 641            struct bfd_elf_version_tree *));
 642 extern boolean bfd_elf64_size_dynamic_sections
 643   PARAMS ((bfd *, const char *, const char *, const char *,
 644            const char * const *, struct bfd_link_info *, struct sec **,
 645            struct bfd_elf_version_tree *));
 646 extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
 647 extern void bfd_elf_set_dt_needed_soname PARAMS ((bfd *, const char *));
 648 extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *));
 649 extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
 650   PARAMS ((bfd *, struct bfd_link_info *));
 651
 652 /* Return an upper bound on the number of bytes required to store a
 653    copy of ABFD's program header table entries.  Return -1 if an error
 654    occurs; bfd_get_error will return an appropriate code.  */
 655 extern long bfd_get_elf_phdr_upper_bound PARAMS ((bfd *abfd));
 656
 657 /* Copy ABFD's program header table entries to *PHDRS.  The entries
 658    will be stored as an array of Elf_Internal_Phdr structures, as
 659    defined in include/elf/internal.h.  To find out how large the
 660    buffer needs to be, call bfd_get_elf_phdr_upper_bound.
 661
 662    Return the number of program header table entries read, or -1 if an
 663    error occurs; bfd_get_error will return an appropriate code.  */
 664 extern int bfd_get_elf_phdrs PARAMS ((bfd *abfd, void *phdrs));
 665
 666 /* Return the arch_size field of an elf bfd, or -1 if not elf.  */
 667 extern int bfd_get_arch_size PARAMS ((bfd *));
 668
 669 /* Return true if address "naturally" sign extends, or -1 if not elf.  */
 670 extern int bfd_get_sign_extend_vma PARAMS ((bfd *));
 671
 672 extern boolean bfd_m68k_elf32_create_embedded_relocs
 673   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 674            char **));
 675
 676 /* SunOS shared library support routines for the linker.  */
 677
 678 extern struct bfd_link_needed_list *bfd_sunos_get_needed_list
 679   PARAMS ((bfd *, struct bfd_link_info *));
 680 extern boolean bfd_sunos_record_link_assignment
 681   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 682 extern boolean bfd_sunos_size_dynamic_sections
 683   PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **,
 684            struct sec **));
 685
 686 /* Linux shared library support routines for the linker.  */
 687
 688 extern boolean bfd_i386linux_size_dynamic_sections
 689   PARAMS ((bfd *, struct bfd_link_info *));
 690 extern boolean bfd_m68klinux_size_dynamic_sections
 691   PARAMS ((bfd *, struct bfd_link_info *));
 692 extern boolean bfd_sparclinux_size_dynamic_sections
 693   PARAMS ((bfd *, struct bfd_link_info *));
 694
 695 /* mmap hacks */
 696
 697 struct _bfd_window_internal;
 698 typedef struct _bfd_window_internal bfd_window_internal;
 699
 700 typedef struct _bfd_window {
 701   /* What the user asked for.  */
 702   PTR data;
 703   bfd_size_type size;
 704   /* The actual window used by BFD.  Small user-requested read-only
 705      regions sharing a page may share a single window into the object
 706      file.  Read-write versions shouldn't until I've fixed things to
 707      keep track of which portions have been claimed by the
 708      application; don't want to give the same region back when the
 709      application wants two writable copies!  */
 710   struct _bfd_window_internal *i;
 711 } bfd_window;
 712
 713 extern void bfd_init_window PARAMS ((bfd_window *));
 714 extern void bfd_free_window PARAMS ((bfd_window *));
 715 extern boolean bfd_get_file_window
 716   PARAMS ((bfd *, file_ptr, bfd_size_type, bfd_window *, boolean));
 717
 718 /* XCOFF support routines for the linker.  */
 719
 720 extern boolean bfd_xcoff_link_record_set
 721   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 722            bfd_size_type));
 723 extern boolean bfd_xcoff_import_symbol
 724   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 725            bfd_vma, const char *, const char *, const char *));
 726 extern boolean bfd_xcoff_export_symbol
 727   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 728            boolean));
 729 extern boolean bfd_xcoff_link_count_reloc
 730   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 731 extern boolean bfd_xcoff_record_link_assignment
 732   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 733 extern boolean bfd_xcoff_size_dynamic_sections
 734   PARAMS ((bfd *, struct bfd_link_info *, const char *, const char *,
 735            unsigned long, unsigned long, unsigned long, boolean,
 736            int, boolean, boolean, struct sec **));
 737
 738 /* Externally visible COFF routines.  */
 739
 740 #if defined(__STDC__) || defined(ALMOST_STDC)
 741 struct internal_syment;
 742 union internal_auxent;
 743 #endif
 744
 745 extern boolean bfd_coff_get_syment
 746   PARAMS ((bfd *, struct symbol_cache_entry *, struct internal_syment *));
 747
 748 extern boolean bfd_coff_get_auxent
 749   PARAMS ((bfd *, struct symbol_cache_entry *, int, union internal_auxent *));
 750
 751 extern boolean bfd_coff_set_symbol_class
 752   PARAMS ((bfd *, struct symbol_cache_entry *, unsigned int));
 753
 754 extern boolean bfd_m68k_coff_create_embedded_relocs
 755   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 756            char **));
 757
 758 /* ARM Interworking support.  Called from linker.  */
 759 extern boolean bfd_arm_allocate_interworking_sections
 760   PARAMS ((struct bfd_link_info *));
 761
 762 extern boolean bfd_arm_process_before_allocation
 763   PARAMS ((bfd *, struct bfd_link_info *, int));
 764
 765 extern boolean bfd_arm_get_bfd_for_interworking
 766   PARAMS ((bfd *, struct bfd_link_info *));
 767
 768 /* PE ARM Interworking support.  Called from linker.  */
 769 extern boolean bfd_arm_pe_allocate_interworking_sections
 770   PARAMS ((struct bfd_link_info *));
 771
 772 extern boolean bfd_arm_pe_process_before_allocation
 773   PARAMS ((bfd *, struct bfd_link_info *, int));
 774
 775 extern boolean bfd_arm_pe_get_bfd_for_interworking
 776   PARAMS ((bfd *, struct bfd_link_info *));
 777
 778 /* ELF ARM Interworking support.  Called from linker.  */
 779 extern boolean bfd_elf32_arm_allocate_interworking_sections
 780   PARAMS ((struct bfd_link_info *));
 781
 782 extern boolean bfd_elf32_arm_process_before_allocation
 783   PARAMS ((bfd *, struct bfd_link_info *, int));
 784
 785 extern boolean bfd_elf32_arm_get_bfd_for_interworking
 786   PARAMS ((bfd *, struct bfd_link_info *));
 787
 788 /* TI COFF load page support.  */
 789 extern void bfd_ticoff_set_section_load_page
 790   PARAMS ((struct sec *, int));
 791
 792 extern int bfd_ticoff_get_section_load_page
 793   PARAMS ((struct sec *));
 794
 795 /* And more from the source.  */
 796 void
 797 bfd_init PARAMS ((void));
 798
 799 bfd *
 800 bfd_openr PARAMS ((CONST char *filename, CONST char *target));
 801
 802 bfd *
 803 bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd));
 804
 805 bfd *
 806 bfd_openstreamr PARAMS ((const char *, const char *, PTR));
 807
 808 bfd *
 809 bfd_openw PARAMS ((CONST char *filename, CONST char *target));
 810
 811 boolean
 812 bfd_close PARAMS ((bfd *abfd));
 813
 814 boolean
 815 bfd_close_all_done PARAMS ((bfd *));
 816
 817 bfd *
 818 bfd_create PARAMS ((CONST char *filename, bfd *templ));
 819
 820 boolean
 821 bfd_make_writable PARAMS ((bfd *abfd));
 822
 823 boolean
 824 bfd_make_readable PARAMS ((bfd *abfd));
 825
 826
 827 /* Byte swapping macros for user section data.  */
 828
 829 #define bfd_put_8(abfd, val, ptr) \
 830                 ((void) (*((unsigned char *) (ptr)) = (unsigned char) (val)))
 831 #define bfd_put_signed_8 \
 832                bfd_put_8
 833 #define bfd_get_8(abfd, ptr) \
 834                 (*(unsigned char *) (ptr))
 835 #define bfd_get_signed_8(abfd, ptr) \
 836                ((*(unsigned char *) (ptr) ^ 0x80) - 0x80)
 837
 838 #define bfd_put_16(abfd, val, ptr) \
 839                 BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
 840 #define bfd_put_signed_16 \
 841                 bfd_put_16
 842 #define bfd_get_16(abfd, ptr) \
 843                 BFD_SEND(abfd, bfd_getx16, (ptr))
 844 #define bfd_get_signed_16(abfd, ptr) \
 845                 BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
 846
 847 #define bfd_put_32(abfd, val, ptr) \
 848                 BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
 849 #define bfd_put_signed_32 \
 850                 bfd_put_32
 851 #define bfd_get_32(abfd, ptr) \
 852                 BFD_SEND(abfd, bfd_getx32, (ptr))
 853 #define bfd_get_signed_32(abfd, ptr) \
 854                 BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
 855
 856 #define bfd_put_64(abfd, val, ptr) \
 857                 BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
 858 #define bfd_put_signed_64 \
 859                 bfd_put_64
 860 #define bfd_get_64(abfd, ptr) \
 861                 BFD_SEND(abfd, bfd_getx64, (ptr))
 862 #define bfd_get_signed_64(abfd, ptr) \
 863                 BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
 864
 865 #define bfd_get(bits, abfd, ptr)                               \
 866                 ((bits) == 8 ? bfd_get_8 (abfd, ptr)           \
 867                 : (bits) == 16 ? bfd_get_16 (abfd, ptr)        \
 868                 : (bits) == 32 ? bfd_get_32 (abfd, ptr)        \
 869                 : (bits) == 64 ? bfd_get_64 (abfd, ptr)        \
 870                 : (abort (), (bfd_vma) - 1))
 871
 872 #define bfd_put(bits, abfd, val, ptr)                          \
 873                 ((bits) == 8 ? bfd_put_8 (abfd, val, ptr)      \
 874                 : (bits) == 16 ? bfd_put_16 (abfd, val, ptr)   \
 875                 : (bits) == 32 ? bfd_put_32 (abfd, val, ptr)   \
 876                 : (bits) == 64 ? bfd_put_64 (abfd, val, ptr)   \
 877                 : (abort (), (void) 0))
 878
 879
 880 /* Byte swapping macros for file header data.  */
 881
 882 #define bfd_h_put_8(abfd, val, ptr) \
 883                bfd_put_8 (abfd, val, ptr)
 884 #define bfd_h_put_signed_8(abfd, val, ptr) \
 885                bfd_put_8 (abfd, val, ptr)
 886 #define bfd_h_get_8(abfd, ptr) \
 887                bfd_get_8 (abfd, ptr)
 888 #define bfd_h_get_signed_8(abfd, ptr) \
 889                bfd_get_signed_8 (abfd, ptr)
 890
 891 #define bfd_h_put_16(abfd, val, ptr) \
 892                 BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
 893 #define bfd_h_put_signed_16 \
 894                 bfd_h_put_16
 895 #define bfd_h_get_16(abfd, ptr) \
 896                 BFD_SEND(abfd, bfd_h_getx16,(ptr))
 897 #define bfd_h_get_signed_16(abfd, ptr) \
 898                 BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
 899
 900 #define bfd_h_put_32(abfd, val, ptr) \
 901                 BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
 902 #define bfd_h_put_signed_32 \
 903                 bfd_h_put_32
 904 #define bfd_h_get_32(abfd, ptr) \
 905                 BFD_SEND(abfd, bfd_h_getx32,(ptr))
 906 #define bfd_h_get_signed_32(abfd, ptr) \
 907                 BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
 908
 909 #define bfd_h_put_64(abfd, val, ptr) \
 910                 BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
 911 #define bfd_h_put_signed_64 \
 912                 bfd_h_put_64
 913 #define bfd_h_get_64(abfd, ptr) \
 914                 BFD_SEND(abfd, bfd_h_getx64,(ptr))
 915 #define bfd_h_get_signed_64(abfd, ptr) \
 916                 BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
 917
 918 /* This structure is used for a comdat section, as in PE.  A comdat
 919    section is associated with a particular symbol.  When the linker
 920    sees a comdat section, it keeps only one of the sections with a
 921    given name and associated with a given symbol.  */
 922
 923 struct bfd_comdat_info
 924 {
 925   /* The name of the symbol associated with a comdat section.  */
 926   const char *name;
 927
 928   /* The local symbol table index of the symbol associated with a
 929      comdat section.  This is only meaningful to the object file format
 930      specific code; it is not an index into the list returned by
 931      bfd_canonicalize_symtab.  */
 932   long symbol;
 933 };
 934
 935 typedef struct sec
 936 {
 937   /* The name of the section; the name isn't a copy, the pointer is
 938      the same as that passed to bfd_make_section.  */
 939
 940   const char *name;
 941
 942   /* A unique sequence number.  */
 943
 944   int id;
 945
 946   /* Which section is it; 0..nth.  */
 947
 948   int index;
 949
 950   /* The next section in the list belonging to the BFD, or NULL.  */
 951
 952   struct sec *next;
 953
 954   /* The field flags contains attributes of the section. Some
 955      flags are read in from the object file, and some are
 956      synthesized from other information.  */
 957
 958   flagword flags;
 959
 960 #define SEC_NO_FLAGS   0x000
 961
 962   /* Tells the OS to allocate space for this section when loading.
 963      This is clear for a section containing debug information only.  */
 964 #define SEC_ALLOC      0x001
 965
 966   /* Tells the OS to load the section from the file when loading.
 967      This is clear for a .bss section.  */
 968 #define SEC_LOAD       0x002
 969
 970   /* The section contains data still to be relocated, so there is
 971      some relocation information too.  */
 972 #define SEC_RELOC      0x004
 973
 974 #if 0   /* Obsolete ? */
 975 #define SEC_BALIGN     0x008
 976 #endif
 977
 978   /* A signal to the OS that the section contains read only data.  */
 979 #define SEC_READONLY   0x010
 980
 981   /* The section contains code only.  */
 982 #define SEC_CODE       0x020
 983
 984   /* The section contains data only.  */
 985 #define SEC_DATA       0x040
 986
 987   /* The section will reside in ROM.  */
 988 #define SEC_ROM        0x080
 989
 990   /* The section contains constructor information. This section
 991      type is used by the linker to create lists of constructors and
 992      destructors used by <<g++>>. When a back end sees a symbol
 993      which should be used in a constructor list, it creates a new
 994      section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
 995      the symbol to it, and builds a relocation. To build the lists
 996      of constructors, all the linker has to do is catenate all the
 997      sections called <<__CTOR_LIST__>> and relocate the data
 998      contained within - exactly the operations it would peform on
 999      standard data.  */
1000 #define SEC_CONSTRUCTOR 0x100
1001
1002   /* The section is a constructor, and should be placed at the
1003      end of the text, data, or bss section(?).  */
1004 #define SEC_CONSTRUCTOR_TEXT 0x1100
1005 #define SEC_CONSTRUCTOR_DATA 0x2100
1006 #define SEC_CONSTRUCTOR_BSS  0x3100
1007
1008   /* The section has contents - a data section could be
1009      <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
1010      <<SEC_HAS_CONTENTS>>  */
1011 #define SEC_HAS_CONTENTS 0x200
1012
1013   /* An instruction to the linker to not output the section
1014      even if it has information which would normally be written.  */
1015 #define SEC_NEVER_LOAD 0x400
1016
1017   /* The section is a COFF shared library section.  This flag is
1018      only for the linker.  If this type of section appears in
1019      the input file, the linker must copy it to the output file
1020      without changing the vma or size.  FIXME: Although this
1021      was originally intended to be general, it really is COFF
1022      specific (and the flag was renamed to indicate this).  It
1023      might be cleaner to have some more general mechanism to
1024      allow the back end to control what the linker does with
1025      sections.  */
1026 #define SEC_COFF_SHARED_LIBRARY 0x800
1027
1028   /* The section has GOT references.  This flag is only for the
1029      linker, and is currently only used by the elf32-hppa back end.
1030      It will be set if global offset table references were detected
1031      in this section, which indicate to the linker that the section
1032      contains PIC code, and must be handled specially when doing a
1033      static link.  */
1034 #define SEC_HAS_GOT_REF 0x4000
1035
1036   /* The section contains common symbols (symbols may be defined
1037      multiple times, the value of a symbol is the amount of
1038      space it requires, and the largest symbol value is the one
1039      used).  Most targets have exactly one of these (which we
1040      translate to bfd_com_section_ptr), but ECOFF has two.  */
1041 #define SEC_IS_COMMON 0x8000
1042
1043   /* The section contains only debugging information.  For
1044      example, this is set for ELF .debug and .stab sections.
1045      strip tests this flag to see if a section can be
1046      discarded.  */
1047 #define SEC_DEBUGGING 0x10000
1048
1049   /* The contents of this section are held in memory pointed to
1050      by the contents field.  This is checked by bfd_get_section_contents,
1051      and the data is retrieved from memory if appropriate.  */
1052 #define SEC_IN_MEMORY 0x20000
1053
1054   /* The contents of this section are to be excluded by the
1055      linker for executable and shared objects unless those
1056      objects are to be further relocated.  */
1057 #define SEC_EXCLUDE 0x40000
1058
1059   /* The contents of this section are to be sorted by the
1060      based on the address specified in the associated symbol
1061      table.  */
1062 #define SEC_SORT_ENTRIES 0x80000
1063
1064   /* When linking, duplicate sections of the same name should be
1065      discarded, rather than being combined into a single section as
1066      is usually done.  This is similar to how common symbols are
1067      handled.  See SEC_LINK_DUPLICATES below.  */
1068 #define SEC_LINK_ONCE 0x100000
1069
1070   /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
1071      should handle duplicate sections.  */
1072 #define SEC_LINK_DUPLICATES 0x600000
1073
1074   /* This value for SEC_LINK_DUPLICATES means that duplicate
1075      sections with the same name should simply be discarded.  */
1076 #define SEC_LINK_DUPLICATES_DISCARD 0x0
1077
1078   /* This value for SEC_LINK_DUPLICATES means that the linker
1079      should warn if there are any duplicate sections, although
1080      it should still only link one copy.  */
1081 #define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
1082
1083   /* This value for SEC_LINK_DUPLICATES means that the linker
1084      should warn if any duplicate sections are a different size.  */
1085 #define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
1086
1087   /* This value for SEC_LINK_DUPLICATES means that the linker
1088      should warn if any duplicate sections contain different
1089      contents.  */
1090 #define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
1091
1092   /* This section was created by the linker as part of dynamic
1093      relocation or other arcane processing.  It is skipped when
1094      going through the first-pass output, trusting that someone
1095      else up the line will take care of it later.  */
1096 #define SEC_LINKER_CREATED 0x800000
1097
1098   /* This section should not be subject to garbage collection.  */
1099 #define SEC_KEEP 0x1000000
1100
1101   /* This section contains "short" data, and should be placed
1102      "near" the GP.  */
1103 #define SEC_SMALL_DATA 0x2000000
1104
1105   /* This section contains data which may be shared with other
1106      executables or shared objects.  */
1107 #define SEC_SHARED 0x4000000
1108
1109   /* When a section with this flag is being linked, then if the size of
1110      the input section is less than a page, it should not cross a page
1111      boundary.  If the size of the input section is one page or more, it
1112      should be aligned on a page boundary.  */
1113 #define SEC_BLOCK 0x8000000
1114
1115   /* Conditionally link this section; do not link if there are no
1116      references found to any symbol in the section.  */
1117 #define SEC_CLINK 0x10000000
1118
1119   /* Attempt to merge identical entities in the section.
1120      Entity size is given in the entsize field.  */
1121 #define SEC_MERGE 0x20000000
1122
1123   /* If given with SEC_MERGE, entities to merge are zero terminated
1124      strings where entsize specifies character size instead of fixed
1125      size entries.  */
1126 #define SEC_STRINGS 0x40000000
1127
1128   /*  End of section flags.  */
1129
1130   /* Some internal packed boolean fields.  */
1131
1132   /* See the vma field.  */
1133   unsigned int user_set_vma : 1;
1134
1135   /* Whether relocations have been processed.  */
1136   unsigned int reloc_done : 1;
1137
1138   /* A mark flag used by some of the linker backends.  */
1139   unsigned int linker_mark : 1;
1140
1141   /* Another mark flag used by some of the linker backends.  Set for
1142      output sections that have a input section.  */
1143   unsigned int linker_has_input : 1;
1144
1145   /* A mark flag used by some linker backends for garbage collection.  */
1146   unsigned int gc_mark : 1;
1147
1148   /* Used by the ELF code to mark sections which have been allocated to segments.  */
1149   unsigned int segment_mark : 1;
1150
1151   /* End of internal packed boolean fields.  */
1152
1153   /*  The virtual memory address of the section - where it will be
1154       at run time.  The symbols are relocated against this.  The
1155       user_set_vma flag is maintained by bfd; if it's not set, the
1156       backend can assign addresses (for example, in <<a.out>>, where
1157       the default address for <<.data>> is dependent on the specific
1158       target and various flags).  */
1159
1160   bfd_vma vma;
1161
1162   /*  The load address of the section - where it would be in a
1163       rom image; really only used for writing section header
1164       information. */
1165
1166   bfd_vma lma;
1167
1168   /* The size of the section in octets, as it will be output.
1169      Contains a value even if the section has no contents (e.g., the
1170      size of <<.bss>>).  This will be filled in after relocation.  */
1171
1172   bfd_size_type _cooked_size;
1173
1174   /* The original size on disk of the section, in octets.  Normally this
1175      value is the same as the size, but if some relaxing has
1176      been done, then this value will be bigger.  */
1177
1178   bfd_size_type _raw_size;
1179
1180   /* If this section is going to be output, then this value is the
1181      offset in *bytes* into the output section of the first byte in the
1182      input section (byte ==> smallest addressable unit on the
1183      target).  In most cases, if this was going to start at the
1184      100th octet (8-bit quantity) in the output section, this value
1185      would be 100.  However, if the target byte size is 16 bits
1186      (bfd_octets_per_byte is "2"), this value would be 50.  */
1187
1188   bfd_vma output_offset;
1189
1190   /* The output section through which to map on output.  */
1191
1192   struct sec *output_section;
1193
1194   /* The alignment requirement of the section, as an exponent of 2 -
1195      e.g., 3 aligns to 2^3 (or 8).  */
1196
1197   unsigned int alignment_power;
1198
1199   /* If an input section, a pointer to a vector of relocation
1200      records for the data in this section.  */
1201
1202   struct reloc_cache_entry *relocation;
1203
1204   /* If an output section, a pointer to a vector of pointers to
1205      relocation records for the data in this section.  */
1206
1207   struct reloc_cache_entry **orelocation;
1208
1209   /* The number of relocation records in one of the above  */
1210
1211   unsigned reloc_count;
1212
1213   /* Information below is back end specific - and not always used
1214      or updated.  */
1215
1216   /* File position of section data.  */
1217
1218   file_ptr filepos;
1219
1220   /* File position of relocation info.  */
1221
1222   file_ptr rel_filepos;
1223
1224   /* File position of line data.  */
1225
1226   file_ptr line_filepos;
1227
1228   /* Pointer to data for applications.  */
1229
1230   PTR userdata;
1231
1232   /* If the SEC_IN_MEMORY flag is set, this points to the actual
1233      contents.  */
1234   unsigned char *contents;
1235
1236   /* Attached line number information.  */
1237
1238   alent *lineno;
1239
1240   /* Number of line number records.  */
1241
1242   unsigned int lineno_count;
1243
1244   /* Entity size for merging purposes.  */
1245
1246   unsigned int entsize;
1247
1248   /* Optional information about a COMDAT entry; NULL if not COMDAT.  */
1249
1250   struct bfd_comdat_info *comdat;
1251
1252   /* Points to the kept section if this section is a link-once section,
1253      and is discarded.  */
1254   struct sec *kept_section;
1255
1256   /* When a section is being output, this value changes as more
1257      linenumbers are written out.  */
1258
1259   file_ptr moving_line_filepos;
1260
1261   /* What the section number is in the target world.  */
1262
1263   int target_index;
1264
1265   PTR used_by_bfd;
1266
1267   /* If this is a constructor section then here is a list of the
1268      relocations created to relocate items within it.  */
1269
1270   struct relent_chain *constructor_chain;
1271
1272   /* The BFD which owns the section.  */
1273
1274   bfd *owner;
1275
1276   /* A symbol which points at this section only */
1277   struct symbol_cache_entry *symbol;
1278   struct symbol_cache_entry **symbol_ptr_ptr;
1279
1280   struct bfd_link_order *link_order_head;
1281   struct bfd_link_order *link_order_tail;
1282 } asection ;
1283
1284 /* These sections are global, and are managed by BFD.  The application
1285    and target back end are not permitted to change the values in
1286    these sections.  New code should use the section_ptr macros rather
1287    than referring directly to the const sections.  The const sections
1288    may eventually vanish.  */
1289 #define BFD_ABS_SECTION_NAME "*ABS*"
1290 #define BFD_UND_SECTION_NAME "*UND*"
1291 #define BFD_COM_SECTION_NAME "*COM*"
1292 #define BFD_IND_SECTION_NAME "*IND*"
1293
1294 /* the absolute section */
1295 extern const asection bfd_abs_section;
1296 #define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
1297 #define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
1298 /* Pointer to the undefined section */
1299 extern const asection bfd_und_section;
1300 #define bfd_und_section_ptr ((asection *) &bfd_und_section)
1301 #define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
1302 /* Pointer to the common section */
1303 extern const asection bfd_com_section;
1304 #define bfd_com_section_ptr ((asection *) &bfd_com_section)
1305 /* Pointer to the indirect section */
1306 extern const asection bfd_ind_section;
1307 #define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
1308 #define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
1309
1310 extern const struct symbol_cache_entry * const bfd_abs_symbol;
1311 extern const struct symbol_cache_entry * const bfd_com_symbol;
1312 extern const struct symbol_cache_entry * const bfd_und_symbol;
1313 extern const struct symbol_cache_entry * const bfd_ind_symbol;
1314 #define bfd_get_section_size_before_reloc(section) \
1315      ((section)->reloc_done ? (abort (), (bfd_size_type) 1) \
1316                             : (section)->_raw_size)
1317 #define bfd_get_section_size_after_reloc(section) \
1318      ((section)->reloc_done ? (section)->_cooked_size \
1319                             : (abort (), (bfd_size_type) 1))
1320 asection *
1321 bfd_get_section_by_name PARAMS ((bfd *abfd, const char *name));
1322
1323 char *
1324 bfd_get_unique_section_name PARAMS ((bfd *abfd,
1325     const char *templat,
1326     int *count));
1327
1328 asection *
1329 bfd_make_section_old_way PARAMS ((bfd *abfd, const char *name));
1330
1331 asection *
1332 bfd_make_section_anyway PARAMS ((bfd *abfd, const char *name));
1333
1334 asection *
1335 bfd_make_section PARAMS ((bfd *, const char *name));
1336
1337 boolean
1338 bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags));
1339
1340 void
1341 bfd_map_over_sections PARAMS ((bfd *abfd,
1342     void (*func) (bfd *abfd,
1343     asection *sect,
1344     PTR obj),
1345     PTR obj));
1346
1347 boolean
1348 bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val));
1349
1350 boolean
1351 bfd_set_section_contents PARAMS ((bfd *abfd,
1352     asection *section,
1353     PTR data,
1354     file_ptr offset,
1355     bfd_size_type count));
1356
1357 boolean
1358 bfd_get_section_contents PARAMS ((bfd *abfd, asection *section, PTR location,
1359     file_ptr offset, bfd_size_type count));
1360
1361 boolean
1362 bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
1363
1364 #define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
1365      BFD_SEND (obfd, _bfd_copy_private_section_data, \
1366                (ibfd, isection, obfd, osection))
1367 void
1368 _bfd_strip_section_from_output PARAMS ((struct bfd_link_info *info, asection *section));
1369
1370 enum bfd_architecture
1371 {
1372   bfd_arch_unknown,   /* File arch not known */
1373   bfd_arch_obscure,   /* Arch known, not one of these */
1374   bfd_arch_m68k,      /* Motorola 68xxx */
1375 #define bfd_mach_m68000 1
1376 #define bfd_mach_m68008 2
1377 #define bfd_mach_m68010 3
1378 #define bfd_mach_m68020 4
1379 #define bfd_mach_m68030 5
1380 #define bfd_mach_m68040 6
1381 #define bfd_mach_m68060 7
1382 #define bfd_mach_cpu32  8
1383 #define bfd_mach_mcf5200  9
1384 #define bfd_mach_mcf5206e 10
1385 #define bfd_mach_mcf5307  11
1386 #define bfd_mach_mcf5407  12
1387   bfd_arch_vax,       /* DEC Vax */
1388   bfd_arch_i960,      /* Intel 960 */
1389     /* The order of the following is important.
1390        lower number indicates a machine type that
1391        only accepts a subset of the instructions
1392        available to machines with higher numbers.
1393        The exception is the "ca", which is
1394        incompatible with all other machines except
1395        "core". */
1396
1397 #define bfd_mach_i960_core      1
1398 #define bfd_mach_i960_ka_sa     2
1399 #define bfd_mach_i960_kb_sb     3
1400 #define bfd_mach_i960_mc        4
1401 #define bfd_mach_i960_xa        5
1402 #define bfd_mach_i960_ca        6
1403 #define bfd_mach_i960_jx        7
1404 #define bfd_mach_i960_hx        8
1405
1406   bfd_arch_a29k,      /* AMD 29000 */
1407   bfd_arch_sparc,     /* SPARC */
1408 #define bfd_mach_sparc                 1
1409 /* The difference between v8plus and v9 is that v9 is a true 64 bit env.  */
1410 #define bfd_mach_sparc_sparclet        2
1411 #define bfd_mach_sparc_sparclite       3
1412 #define bfd_mach_sparc_v8plus          4
1413 #define bfd_mach_sparc_v8plusa         5 /* with ultrasparc add'ns */
1414 #define bfd_mach_sparc_sparclite_le    6
1415 #define bfd_mach_sparc_v9              7
1416 #define bfd_mach_sparc_v9a             8 /* with ultrasparc add'ns */
1417 #define bfd_mach_sparc_v8plusb         9 /* with cheetah add'ns */
1418 #define bfd_mach_sparc_v9b             10 /* with cheetah add'ns */
1419 /* Nonzero if MACH has the v9 instruction set.  */
1420 #define bfd_mach_sparc_v9_p(mach) \
1421   ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
1422    && (mach) != bfd_mach_sparc_sparclite_le)
1423   bfd_arch_mips,      /* MIPS Rxxxx */
1424 #define bfd_mach_mips3000              3000
1425 #define bfd_mach_mips3900              3900
1426 #define bfd_mach_mips4000              4000
1427 #define bfd_mach_mips4010              4010
1428 #define bfd_mach_mips4100              4100
1429 #define bfd_mach_mips4111              4111
1430 #define bfd_mach_mips4300              4300
1431 #define bfd_mach_mips4400              4400
1432 #define bfd_mach_mips4600              4600
1433 #define bfd_mach_mips4650              4650
1434 #define bfd_mach_mips5000              5000
1435 #define bfd_mach_mips6000              6000
1436 #define bfd_mach_mips8000              8000
1437 #define bfd_mach_mips10000             10000
1438 #define bfd_mach_mips12000             12000
1439 #define bfd_mach_mips16                16
1440 #define bfd_mach_mips32                32
1441 #define bfd_mach_mips32_4k             3204113 /* 32, 04, octal 'K' */
1442 #define bfd_mach_mips5                 5
1443 #define bfd_mach_mips64                64
1444 #define bfd_mach_mips_sb1              12310201 /* octal 'SB', 01 */
1445   bfd_arch_i386,      /* Intel 386 */
1446 #define bfd_mach_i386_i386 0
1447 #define bfd_mach_i386_i8086 1
1448 #define bfd_mach_i386_i386_intel_syntax 2
1449 #define bfd_mach_x86_64 3
1450 #define bfd_mach_x86_64_intel_syntax 4
1451   bfd_arch_we32k,     /* AT&T WE32xxx */
1452   bfd_arch_tahoe,     /* CCI/Harris Tahoe */
1453   bfd_arch_i860,      /* Intel 860 */
1454   bfd_arch_i370,      /* IBM 360/370 Mainframes */
1455   bfd_arch_romp,      /* IBM ROMP PC/RT */
1456   bfd_arch_alliant,   /* Alliant */
1457   bfd_arch_convex,    /* Convex */
1458   bfd_arch_m88k,      /* Motorola 88xxx */
1459   bfd_arch_pyramid,   /* Pyramid Technology */
1460   bfd_arch_h8300,     /* Hitachi H8/300 */
1461 #define bfd_mach_h8300   1
1462 #define bfd_mach_h8300h  2
1463 #define bfd_mach_h8300s  3
1464   bfd_arch_pdp11,     /* DEC PDP-11 */
1465   bfd_arch_powerpc,   /* PowerPC */
1466 #define bfd_mach_ppc           0
1467 #define bfd_mach_ppc_403       403
1468 #define bfd_mach_ppc_403gc     4030
1469 #define bfd_mach_ppc_505       505
1470 #define bfd_mach_ppc_601       601
1471 #define bfd_mach_ppc_602       602
1472 #define bfd_mach_ppc_603       603
1473 #define bfd_mach_ppc_ec603e    6031
1474 #define bfd_mach_ppc_604       604
1475 #define bfd_mach_ppc_620       620
1476 #define bfd_mach_ppc_630       630
1477 #define bfd_mach_ppc_750       750
1478 #define bfd_mach_ppc_860       860
1479 #define bfd_mach_ppc_a35       35
1480 #define bfd_mach_ppc_rs64ii    642
1481 #define bfd_mach_ppc_rs64iii   643
1482 #define bfd_mach_ppc_7400      7400
1483   bfd_arch_rs6000,    /* IBM RS/6000 */
1484 #define bfd_mach_rs6k          0
1485 #define bfd_mach_rs6k_rs1      6001
1486 #define bfd_mach_rs6k_rsc      6003
1487 #define bfd_mach_rs6k_rs2      6002
1488   bfd_arch_hppa,      /* HP PA RISC */
1489   bfd_arch_d10v,      /* Mitsubishi D10V */
1490 #define bfd_mach_d10v          0
1491 #define bfd_mach_d10v_ts2      2
1492 #define bfd_mach_d10v_ts3      3
1493   bfd_arch_d30v,      /* Mitsubishi D30V */
1494   bfd_arch_m68hc11,   /* Motorola 68HC11 */
1495   bfd_arch_m68hc12,   /* Motorola 68HC12 */
1496   bfd_arch_z8k,       /* Zilog Z8000 */
1497 #define bfd_mach_z8001         1
1498 #define bfd_mach_z8002         2
1499   bfd_arch_h8500,     /* Hitachi H8/500 */
1500   bfd_arch_sh,        /* Hitachi SH */
1501 #define bfd_mach_sh            0
1502 #define bfd_mach_sh2        0x20
1503 #define bfd_mach_sh_dsp     0x2d
1504 #define bfd_mach_sh3        0x30
1505 #define bfd_mach_sh3_dsp    0x3d
1506 #define bfd_mach_sh3e       0x3e
1507 #define bfd_mach_sh4        0x40
1508   bfd_arch_alpha,     /* Dec Alpha */
1509 #define bfd_mach_alpha_ev4  0x10
1510 #define bfd_mach_alpha_ev5  0x20
1511 #define bfd_mach_alpha_ev6  0x30
1512   bfd_arch_arm,       /* Advanced Risc Machines ARM */
1513 #define bfd_mach_arm_2         1
1514 #define bfd_mach_arm_2a        2
1515 #define bfd_mach_arm_3         3
1516 #define bfd_mach_arm_3M        4
1517 #define bfd_mach_arm_4         5
1518 #define bfd_mach_arm_4T        6
1519 #define bfd_mach_arm_5         7
1520 #define bfd_mach_arm_5T        8
1521 #define bfd_mach_arm_5TE       9
1522 #define bfd_mach_arm_XScale    10
1523   bfd_arch_ns32k,     /* National Semiconductors ns32000 */
1524   bfd_arch_w65,       /* WDC 65816 */
1525   bfd_arch_tic30,     /* Texas Instruments TMS320C30 */
1526   bfd_arch_tic54x,    /* Texas Instruments TMS320C54X */
1527   bfd_arch_tic80,     /* TI TMS320c80 (MVP) */
1528   bfd_arch_v850,      /* NEC V850 */
1529 #define bfd_mach_v850          0
1530 #define bfd_mach_v850e         'E'
1531 #define bfd_mach_v850ea        'A'
1532   bfd_arch_arc,       /* ARC Cores */
1533 #define bfd_mach_arc_5         0
1534 #define bfd_mach_arc_6         1
1535 #define bfd_mach_arc_7         2
1536 #define bfd_mach_arc_8         3
1537   bfd_arch_m32r,      /* Mitsubishi M32R/D */
1538 #define bfd_mach_m32r          0 /* backwards compatibility */
1539 #define bfd_mach_m32rx         'x'
1540   bfd_arch_mn10200,   /* Matsushita MN10200 */
1541   bfd_arch_mn10300,   /* Matsushita MN10300 */
1542 #define bfd_mach_mn10300               300
1543 #define bfd_mach_am33          330
1544   bfd_arch_fr30,
1545 #define bfd_mach_fr30          0x46523330
1546   bfd_arch_mcore,
1547   bfd_arch_ia64,      /* HP/Intel ia64 */
1548 #define bfd_mach_ia64_elf64    0
1549 #define bfd_mach_ia64_elf32    1
1550   bfd_arch_pj,
1551   bfd_arch_avr,       /* Atmel AVR microcontrollers */
1552 #define bfd_mach_avr1          1
1553 #define bfd_mach_avr2          2
1554 #define bfd_mach_avr3          3
1555 #define bfd_mach_avr4          4
1556 #define bfd_mach_avr5          5
1557   bfd_arch_cris,      /* Axis CRIS */
1558   bfd_arch_s390,      /* IBM s390 */
1559 #define bfd_mach_s390_esa      0
1560 #define bfd_mach_s390_esame    1
1561   bfd_arch_openrisc,  /* OpenRISC */
1562   bfd_arch_last
1563   };
1564
1565 typedef struct bfd_arch_info
1566 {
1567   int bits_per_word;
1568   int bits_per_address;
1569   int bits_per_byte;
1570   enum bfd_architecture arch;
1571   unsigned long mach;
1572   const char *arch_name;
1573   const char *printable_name;
1574   unsigned int section_align_power;
1575   /* True if this is the default machine for the architecture.  */
1576   boolean the_default;
1577   const struct bfd_arch_info * (*compatible)
1578        PARAMS ((const struct bfd_arch_info *a,
1579                 const struct bfd_arch_info *b));
1580
1581   boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *));
1582
1583   const struct bfd_arch_info *next;
1584 } bfd_arch_info_type;
1585 const char *
1586 bfd_printable_name PARAMS ((bfd *abfd));
1587
1588 const bfd_arch_info_type *
1589 bfd_scan_arch PARAMS ((const char *string));
1590
1591 const char **
1592 bfd_arch_list PARAMS ((void));
1593
1594 const bfd_arch_info_type *
1595 bfd_arch_get_compatible PARAMS ((
1596     const bfd *abfd,
1597     const bfd *bbfd));
1598
1599 void
1600 bfd_set_arch_info PARAMS ((bfd *abfd, const bfd_arch_info_type *arg));
1601
1602 enum bfd_architecture
1603 bfd_get_arch PARAMS ((bfd *abfd));
1604
1605 unsigned long
1606 bfd_get_mach PARAMS ((bfd *abfd));
1607
1608 unsigned int
1609 bfd_arch_bits_per_byte PARAMS ((bfd *abfd));
1610
1611 unsigned int
1612 bfd_arch_bits_per_address PARAMS ((bfd *abfd));
1613
1614 const bfd_arch_info_type *
1615 bfd_get_arch_info PARAMS ((bfd *abfd));
1616
1617 const bfd_arch_info_type *
1618 bfd_lookup_arch PARAMS ((enum bfd_architecture
1619     arch,
1620     unsigned long machine));
1621
1622 const char *
1623 bfd_printable_arch_mach PARAMS ((enum bfd_architecture arch, unsigned long machine));
1624
1625 unsigned int
1626 bfd_octets_per_byte PARAMS ((bfd *abfd));
1627
1628 unsigned int
1629 bfd_arch_mach_octets_per_byte PARAMS ((enum bfd_architecture arch,
1630     unsigned long machine));
1631
1632 typedef enum bfd_reloc_status
1633 {
1634        /* No errors detected */
1635   bfd_reloc_ok,
1636
1637        /* The relocation was performed, but there was an overflow. */
1638   bfd_reloc_overflow,
1639
1640        /* The address to relocate was not within the section supplied. */
1641   bfd_reloc_outofrange,
1642
1643        /* Used by special functions */
1644   bfd_reloc_continue,
1645
1646        /* Unsupported relocation size requested. */
1647   bfd_reloc_notsupported,
1648
1649        /* Unused */
1650   bfd_reloc_other,
1651
1652        /* The symbol to relocate against was undefined. */
1653   bfd_reloc_undefined,
1654
1655        /* The relocation was performed, but may not be ok - presently
1656           generated only when linking i960 coff files with i960 b.out
1657           symbols.  If this type is returned, the error_message argument
1658           to bfd_perform_relocation will be set.  */
1659   bfd_reloc_dangerous
1660  }
1661  bfd_reloc_status_type;
1662
1663
1664 typedef struct reloc_cache_entry
1665 {
1666        /* A pointer into the canonical table of pointers  */
1667   struct symbol_cache_entry **sym_ptr_ptr;
1668
1669        /* offset in section */
1670   bfd_size_type address;
1671
1672        /* addend for relocation value */
1673   bfd_vma addend;
1674
1675        /* Pointer to how to perform the required relocation */
1676   reloc_howto_type *howto;
1677
1678 } arelent;
1679 enum complain_overflow
1680 {
1681        /* Do not complain on overflow. */
1682   complain_overflow_dont,
1683
1684        /* Complain if the bitfield overflows, whether it is considered
1685           as signed or unsigned. */
1686   complain_overflow_bitfield,
1687
1688        /* Complain if the value overflows when considered as signed
1689           number. */
1690   complain_overflow_signed,
1691
1692        /* Complain if the value overflows when considered as an
1693           unsigned number. */
1694   complain_overflow_unsigned
1695 };
1696
1697 struct reloc_howto_struct
1698 {
1699        /*  The type field has mainly a documentary use - the back end can
1700            do what it wants with it, though normally the back end's
1701            external idea of what a reloc number is stored
1702            in this field. For example, a PC relative word relocation
1703            in a coff environment has the type 023 - because that's
1704            what the outside world calls a R_PCRWORD reloc. */
1705   unsigned int type;
1706
1707        /*  The value the final relocation is shifted right by. This drops
1708            unwanted data from the relocation.  */
1709   unsigned int rightshift;
1710
1711        /*  The size of the item to be relocated.  This is *not* a
1712            power-of-two measure.  To get the number of bytes operated
1713            on by a type of relocation, use bfd_get_reloc_size.  */
1714   int size;
1715
1716        /*  The number of bits in the item to be relocated.  This is used
1717            when doing overflow checking.  */
1718   unsigned int bitsize;
1719
1720        /*  Notes that the relocation is relative to the location in the
1721            data section of the addend. The relocation function will
1722            subtract from the relocation value the address of the location
1723            being relocated. */
1724   boolean pc_relative;
1725
1726        /*  The bit position of the reloc value in the destination.
1727            The relocated value is left shifted by this amount. */
1728   unsigned int bitpos;
1729
1730        /* What type of overflow error should be checked for when
1731           relocating. */
1732   enum complain_overflow complain_on_overflow;
1733
1734        /* If this field is non null, then the supplied function is
1735           called rather than the normal function. This allows really
1736           strange relocation methods to be accomodated (e.g., i960 callj
1737           instructions). */
1738   bfd_reloc_status_type (*special_function)
1739                                    PARAMS ((bfd *abfd,
1740                                             arelent *reloc_entry,
1741                                             struct symbol_cache_entry *symbol,
1742                                             PTR data,
1743                                             asection *input_section,
1744                                             bfd *output_bfd,
1745                                             char **error_message));
1746
1747        /* The textual name of the relocation type. */
1748   char *name;
1749
1750        /* Some formats record a relocation addend in the section contents
1751           rather than with the relocation.  For ELF formats this is the
1752           distinction between USE_REL and USE_RELA (though the code checks
1753           for USE_REL == 1/0).  The value of this field is TRUE if the
1754           addend is recorded with the section contents; when performing a
1755           partial link (ld -r) the section contents (the data) will be
1756           modified.  The value of this field is FALSE if addends are
1757           recorded with the relocation (in arelent.addend); when performing
1758           a partial link the relocation will be modified.
1759           All relocations for all ELF USE_RELA targets should set this field
1760           to FALSE (values of TRUE should be looked on with suspicion).
1761           However, the converse is not true: not all relocations of all ELF
1762           USE_REL targets set this field to TRUE.  Why this is so is peculiar
1763           to each particular target.  For relocs that aren't used in partial
1764           links (e.g. GOT stuff) it doesn't matter what this is set to.  */
1765   boolean partial_inplace;
1766
1767        /* The src_mask selects which parts of the read in data
1768           are to be used in the relocation sum.  E.g., if this was an 8 bit
1769           byte of data which we read and relocated, this would be
1770           0x000000ff. When we have relocs which have an addend, such as
1771           sun4 extended relocs, the value in the offset part of a
1772           relocating field is garbage so we never use it. In this case
1773           the mask would be 0x00000000. */
1774   bfd_vma src_mask;
1775
1776        /* The dst_mask selects which parts of the instruction are replaced
1777           into the instruction. In most cases src_mask == dst_mask,
1778           except in the above special case, where dst_mask would be
1779           0x000000ff, and src_mask would be 0x00000000.   */
1780   bfd_vma dst_mask;
1781
1782        /* When some formats create PC relative instructions, they leave
1783           the value of the pc of the place being relocated in the offset
1784           slot of the instruction, so that a PC relative relocation can
1785           be made just by adding in an ordinary offset (e.g., sun3 a.out).
1786           Some formats leave the displacement part of an instruction
1787           empty (e.g., m88k bcs); this flag signals the fact.*/
1788   boolean pcrel_offset;
1789
1790 };
1791 #define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
1792   {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
1793 #define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
1794
1795 #define EMPTY_HOWTO(C) \
1796   HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
1797
1798 #define HOWTO_PREPARE(relocation, symbol)      \
1799   {                                            \
1800   if (symbol != (asymbol *)NULL) {             \
1801     if (bfd_is_com_section (symbol->section)) { \
1802       relocation = 0;                          \
1803     }                                          \
1804     else {                                     \
1805       relocation = symbol->value;              \
1806     }                                          \
1807   }                                            \
1808 }
1809 unsigned int
1810 bfd_get_reloc_size PARAMS ((reloc_howto_type *));
1811
1812 typedef struct relent_chain {
1813   arelent relent;
1814   struct   relent_chain *next;
1815 } arelent_chain;
1816 bfd_reloc_status_type
1817 bfd_check_overflow PARAMS ((enum complain_overflow how,
1818     unsigned int bitsize,
1819     unsigned int rightshift,
1820     unsigned int addrsize,
1821     bfd_vma relocation));
1822
1823 bfd_reloc_status_type
1824 bfd_perform_relocation PARAMS ((bfd *abfd,
1825     arelent *reloc_entry,
1826     PTR data,
1827     asection *input_section,
1828     bfd *output_bfd,
1829     char **error_message));
1830
1831 bfd_reloc_status_type
1832 bfd_install_relocation PARAMS ((bfd *abfd,
1833     arelent *reloc_entry,
1834     PTR data, bfd_vma data_start,
1835     asection *input_section,
1836     char **error_message));
1837
1838 enum bfd_reloc_code_real {
1839   _dummy_first_bfd_reloc_code_real,
1840
1841
1842 /* Basic absolute relocations of N bits. */
1843   BFD_RELOC_64,
1844   BFD_RELOC_32,
1845   BFD_RELOC_26,
1846   BFD_RELOC_24,
1847   BFD_RELOC_16,
1848   BFD_RELOC_14,
1849   BFD_RELOC_8,
1850
1851 /* PC-relative relocations.  Sometimes these are relative to the address
1852 of the relocation itself; sometimes they are relative to the start of
1853 the section containing the relocation.  It depends on the specific target.
1854
1855 The 24-bit relocation is used in some Intel 960 configurations. */
1856   BFD_RELOC_64_PCREL,
1857   BFD_RELOC_32_PCREL,
1858   BFD_RELOC_24_PCREL,
1859   BFD_RELOC_16_PCREL,
1860   BFD_RELOC_12_PCREL,
1861   BFD_RELOC_8_PCREL,
1862
1863 /* For ELF. */
1864   BFD_RELOC_32_GOT_PCREL,
1865   BFD_RELOC_16_GOT_PCREL,
1866   BFD_RELOC_8_GOT_PCREL,
1867   BFD_RELOC_32_GOTOFF,
1868   BFD_RELOC_16_GOTOFF,
1869   BFD_RELOC_LO16_GOTOFF,
1870   BFD_RELOC_HI16_GOTOFF,
1871   BFD_RELOC_HI16_S_GOTOFF,
1872   BFD_RELOC_8_GOTOFF,
1873   BFD_RELOC_64_PLT_PCREL,
1874   BFD_RELOC_32_PLT_PCREL,
1875   BFD_RELOC_24_PLT_PCREL,
1876   BFD_RELOC_16_PLT_PCREL,
1877   BFD_RELOC_8_PLT_PCREL,
1878   BFD_RELOC_64_PLTOFF,
1879   BFD_RELOC_32_PLTOFF,
1880   BFD_RELOC_16_PLTOFF,
1881   BFD_RELOC_LO16_PLTOFF,
1882   BFD_RELOC_HI16_PLTOFF,
1883   BFD_RELOC_HI16_S_PLTOFF,
1884   BFD_RELOC_8_PLTOFF,
1885
1886 /* Relocations used by 68K ELF. */
1887   BFD_RELOC_68K_GLOB_DAT,
1888   BFD_RELOC_68K_JMP_SLOT,
1889   BFD_RELOC_68K_RELATIVE,
1890
1891 /* Linkage-table relative. */
1892   BFD_RELOC_32_BASEREL,
1893   BFD_RELOC_16_BASEREL,
1894   BFD_RELOC_LO16_BASEREL,
1895   BFD_RELOC_HI16_BASEREL,
1896   BFD_RELOC_HI16_S_BASEREL,
1897   BFD_RELOC_8_BASEREL,
1898   BFD_RELOC_RVA,
1899
1900 /* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
1901   BFD_RELOC_8_FFnn,
1902
1903 /* These PC-relative relocations are stored as word displacements --
1904 i.e., byte displacements shifted right two bits.  The 30-bit word
1905 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1906 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1907 signed 16-bit displacement is used on the MIPS, and the 23-bit
1908 displacement is used on the Alpha. */
1909   BFD_RELOC_32_PCREL_S2,
1910   BFD_RELOC_16_PCREL_S2,
1911   BFD_RELOC_23_PCREL_S2,
1912
1913 /* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1914 the target word.  These are used on the SPARC. */
1915   BFD_RELOC_HI22,
1916   BFD_RELOC_LO10,
1917
1918 /* For systems that allocate a Global Pointer register, these are
1919 displacements off that register.  These relocation types are
1920 handled specially, because the value the register will have is
1921 decided relatively late. */
1922   BFD_RELOC_GPREL16,
1923   BFD_RELOC_GPREL32,
1924
1925 /* Reloc types used for i960/b.out. */
1926   BFD_RELOC_I960_CALLJ,
1927
1928 /* SPARC ELF relocations.  There is probably some overlap with other
1929 relocation types already defined. */
1930   BFD_RELOC_NONE,
1931   BFD_RELOC_SPARC_WDISP22,
1932   BFD_RELOC_SPARC22,
1933   BFD_RELOC_SPARC13,
1934   BFD_RELOC_SPARC_GOT10,
1935   BFD_RELOC_SPARC_GOT13,
1936   BFD_RELOC_SPARC_GOT22,
1937   BFD_RELOC_SPARC_PC10,
1938   BFD_RELOC_SPARC_PC22,
1939   BFD_RELOC_SPARC_WPLT30,
1940   BFD_RELOC_SPARC_COPY,
1941   BFD_RELOC_SPARC_GLOB_DAT,
1942   BFD_RELOC_SPARC_JMP_SLOT,
1943   BFD_RELOC_SPARC_RELATIVE,
1944   BFD_RELOC_SPARC_UA16,
1945   BFD_RELOC_SPARC_UA32,
1946   BFD_RELOC_SPARC_UA64,
1947
1948 /* I think these are specific to SPARC a.out (e.g., Sun 4). */
1949   BFD_RELOC_SPARC_BASE13,
1950   BFD_RELOC_SPARC_BASE22,
1951
1952 /* SPARC64 relocations */
1953 #define BFD_RELOC_SPARC_64 BFD_RELOC_64
1954   BFD_RELOC_SPARC_10,
1955   BFD_RELOC_SPARC_11,
1956   BFD_RELOC_SPARC_OLO10,
1957   BFD_RELOC_SPARC_HH22,
1958   BFD_RELOC_SPARC_HM10,
1959   BFD_RELOC_SPARC_LM22,
1960   BFD_RELOC_SPARC_PC_HH22,
1961   BFD_RELOC_SPARC_PC_HM10,
1962   BFD_RELOC_SPARC_PC_LM22,
1963   BFD_RELOC_SPARC_WDISP16,
1964   BFD_RELOC_SPARC_WDISP19,
1965   BFD_RELOC_SPARC_7,
1966   BFD_RELOC_SPARC_6,
1967   BFD_RELOC_SPARC_5,
1968 #define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL
1969   BFD_RELOC_SPARC_PLT64,
1970   BFD_RELOC_SPARC_HIX22,
1971   BFD_RELOC_SPARC_LOX10,
1972   BFD_RELOC_SPARC_H44,
1973   BFD_RELOC_SPARC_M44,
1974   BFD_RELOC_SPARC_L44,
1975   BFD_RELOC_SPARC_REGISTER,
1976
1977 /* SPARC little endian relocation */
1978   BFD_RELOC_SPARC_REV32,
1979
1980 /* Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1981 "addend" in some special way.
1982 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1983 writing; when reading, it will be the absolute section symbol.  The
1984 addend is the displacement in bytes of the "lda" instruction from
1985 the "ldah" instruction (which is at the address of this reloc). */
1986   BFD_RELOC_ALPHA_GPDISP_HI16,
1987
1988 /* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1989 with GPDISP_HI16 relocs.  The addend is ignored when writing the
1990 relocations out, and is filled in with the file's GP value on
1991 reading, for convenience. */
1992   BFD_RELOC_ALPHA_GPDISP_LO16,
1993
1994 /* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1995 relocation except that there is no accompanying GPDISP_LO16
1996 relocation. */
1997   BFD_RELOC_ALPHA_GPDISP,
1998
1999 /* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2000 the assembler turns it into a LDQ instruction to load the address of
2001 the symbol, and then fills in a register in the real instruction.
2002
2003 The LITERAL reloc, at the LDQ instruction, refers to the .lita
2004 section symbol.  The addend is ignored when writing, but is filled
2005 in with the file's GP value on reading, for convenience, as with the
2006 GPDISP_LO16 reloc.
2007
2008 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2009 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2010 but it generates output not based on the position within the .got
2011 section, but relative to the GP value chosen for the file during the
2012 final link stage.
2013
2014 The LITUSE reloc, on the instruction using the loaded address, gives
2015 information to the linker that it might be able to use to optimize
2016 away some literal section references.  The symbol is ignored (read
2017 as the absolute section symbol), and the "addend" indicates the type
2018 of instruction using the register:
2019 1 - "memory" fmt insn
2020 2 - byte-manipulation (byte offset reg)
2021 3 - jsr (target of branch)
2022
2023 The GNU linker currently doesn't do any of this optimizing. */
2024   BFD_RELOC_ALPHA_LITERAL,
2025   BFD_RELOC_ALPHA_ELF_LITERAL,
2026   BFD_RELOC_ALPHA_LITUSE,
2027
2028 /* The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
2029 process the explicit !<reloc>!sequence relocations, and are mapped
2030 into the normal relocations at the end of processing. */
2031   BFD_RELOC_ALPHA_USER_LITERAL,
2032   BFD_RELOC_ALPHA_USER_LITUSE_BASE,
2033   BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF,
2034   BFD_RELOC_ALPHA_USER_LITUSE_JSR,
2035   BFD_RELOC_ALPHA_USER_GPDISP,
2036   BFD_RELOC_ALPHA_USER_GPRELHIGH,
2037   BFD_RELOC_ALPHA_USER_GPRELLOW,
2038
2039 /* The HINT relocation indicates a value that should be filled into the
2040 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2041 prediction logic which may be provided on some processors. */
2042   BFD_RELOC_ALPHA_HINT,
2043
2044 /* The LINKAGE relocation outputs a linkage pair in the object file,
2045 which is filled by the linker. */
2046   BFD_RELOC_ALPHA_LINKAGE,
2047
2048 /* The CODEADDR relocation outputs a STO_CA in the object file,
2049 which is filled by the linker. */
2050   BFD_RELOC_ALPHA_CODEADDR,
2051
2052 /* Bits 27..2 of the relocation address shifted right 2 bits;
2053 simple reloc otherwise. */
2054   BFD_RELOC_MIPS_JMP,
2055
2056 /* The MIPS16 jump instruction. */
2057   BFD_RELOC_MIPS16_JMP,
2058
2059 /* MIPS16 GP relative reloc. */
2060   BFD_RELOC_MIPS16_GPREL,
2061
2062 /* High 16 bits of 32-bit value; simple reloc. */
2063   BFD_RELOC_HI16,
2064
2065 /* High 16 bits of 32-bit value but the low 16 bits will be sign
2066 extended and added to form the final result.  If the low 16
2067 bits form a negative number, we need to add one to the high value
2068 to compensate for the borrow when the low bits are added. */
2069   BFD_RELOC_HI16_S,
2070
2071 /* Low 16 bits. */
2072   BFD_RELOC_LO16,
2073
2074 /* Like BFD_RELOC_HI16_S, but PC relative. */
2075   BFD_RELOC_PCREL_HI16_S,
2076
2077 /* Like BFD_RELOC_LO16, but PC relative. */
2078   BFD_RELOC_PCREL_LO16,
2079
2080 /* Relocation relative to the global pointer. */
2081 #define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
2082
2083 /* Relocation against a MIPS literal section. */
2084   BFD_RELOC_MIPS_LITERAL,
2085
2086 /* MIPS ELF relocations. */
2087   BFD_RELOC_MIPS_GOT16,
2088   BFD_RELOC_MIPS_CALL16,
2089 #define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
2090   BFD_RELOC_MIPS_GOT_HI16,
2091   BFD_RELOC_MIPS_GOT_LO16,
2092   BFD_RELOC_MIPS_CALL_HI16,
2093   BFD_RELOC_MIPS_CALL_LO16,
2094   BFD_RELOC_MIPS_SUB,
2095   BFD_RELOC_MIPS_GOT_PAGE,
2096   BFD_RELOC_MIPS_GOT_OFST,
2097   BFD_RELOC_MIPS_GOT_DISP,
2098   BFD_RELOC_MIPS_SHIFT5,
2099   BFD_RELOC_MIPS_SHIFT6,
2100   BFD_RELOC_MIPS_INSERT_A,
2101   BFD_RELOC_MIPS_INSERT_B,
2102   BFD_RELOC_MIPS_DELETE,
2103   BFD_RELOC_MIPS_HIGHEST,
2104   BFD_RELOC_MIPS_HIGHER,
2105   BFD_RELOC_MIPS_SCN_DISP,
2106   BFD_RELOC_MIPS_REL16,
2107   BFD_RELOC_MIPS_RELGOT,
2108   BFD_RELOC_MIPS_JALR,
2109
2110
2111 /* i386/elf relocations */
2112   BFD_RELOC_386_GOT32,
2113   BFD_RELOC_386_PLT32,
2114   BFD_RELOC_386_COPY,
2115   BFD_RELOC_386_GLOB_DAT,
2116   BFD_RELOC_386_JUMP_SLOT,
2117   BFD_RELOC_386_RELATIVE,
2118   BFD_RELOC_386_GOTOFF,
2119   BFD_RELOC_386_GOTPC,
2120
2121 /* x86-64/elf relocations */
2122   BFD_RELOC_X86_64_GOT32,
2123   BFD_RELOC_X86_64_PLT32,
2124   BFD_RELOC_X86_64_COPY,
2125   BFD_RELOC_X86_64_GLOB_DAT,
2126   BFD_RELOC_X86_64_JUMP_SLOT,
2127   BFD_RELOC_X86_64_RELATIVE,
2128   BFD_RELOC_X86_64_GOTPCREL,
2129   BFD_RELOC_X86_64_32S,
2130
2131 /* ns32k relocations */
2132   BFD_RELOC_NS32K_IMM_8,
2133   BFD_RELOC_NS32K_IMM_16,
2134   BFD_RELOC_NS32K_IMM_32,
2135   BFD_RELOC_NS32K_IMM_8_PCREL,
2136   BFD_RELOC_NS32K_IMM_16_PCREL,
2137   BFD_RELOC_NS32K_IMM_32_PCREL,
2138   BFD_RELOC_NS32K_DISP_8,
2139   BFD_RELOC_NS32K_DISP_16,
2140   BFD_RELOC_NS32K_DISP_32,
2141   BFD_RELOC_NS32K_DISP_8_PCREL,
2142   BFD_RELOC_NS32K_DISP_16_PCREL,
2143   BFD_RELOC_NS32K_DISP_32_PCREL,
2144
2145 /* PDP11 relocations */
2146   BFD_RELOC_PDP11_DISP_8_PCREL,
2147   BFD_RELOC_PDP11_DISP_6_PCREL,
2148
2149 /* Picojava relocs.  Not all of these appear in object files. */
2150   BFD_RELOC_PJ_CODE_HI16,
2151   BFD_RELOC_PJ_CODE_LO16,
2152   BFD_RELOC_PJ_CODE_DIR16,
2153   BFD_RELOC_PJ_CODE_DIR32,
2154   BFD_RELOC_PJ_CODE_REL16,
2155   BFD_RELOC_PJ_CODE_REL32,
2156
2157 /* Power(rs6000) and PowerPC relocations. */
2158   BFD_RELOC_PPC_B26,
2159   BFD_RELOC_PPC_BA26,
2160   BFD_RELOC_PPC_TOC16,
2161   BFD_RELOC_PPC_B16,
2162   BFD_RELOC_PPC_B16_BRTAKEN,
2163   BFD_RELOC_PPC_B16_BRNTAKEN,
2164   BFD_RELOC_PPC_BA16,
2165   BFD_RELOC_PPC_BA16_BRTAKEN,
2166   BFD_RELOC_PPC_BA16_BRNTAKEN,
2167   BFD_RELOC_PPC_COPY,
2168   BFD_RELOC_PPC_GLOB_DAT,
2169   BFD_RELOC_PPC_JMP_SLOT,
2170   BFD_RELOC_PPC_RELATIVE,
2171   BFD_RELOC_PPC_LOCAL24PC,
2172   BFD_RELOC_PPC_EMB_NADDR32,
2173   BFD_RELOC_PPC_EMB_NADDR16,
2174   BFD_RELOC_PPC_EMB_NADDR16_LO,
2175   BFD_RELOC_PPC_EMB_NADDR16_HI,
2176   BFD_RELOC_PPC_EMB_NADDR16_HA,
2177   BFD_RELOC_PPC_EMB_SDAI16,
2178   BFD_RELOC_PPC_EMB_SDA2I16,
2179   BFD_RELOC_PPC_EMB_SDA2REL,
2180   BFD_RELOC_PPC_EMB_SDA21,
2181   BFD_RELOC_PPC_EMB_MRKREF,
2182   BFD_RELOC_PPC_EMB_RELSEC16,
2183   BFD_RELOC_PPC_EMB_RELST_LO,
2184   BFD_RELOC_PPC_EMB_RELST_HI,
2185   BFD_RELOC_PPC_EMB_RELST_HA,
2186   BFD_RELOC_PPC_EMB_BIT_FLD,
2187   BFD_RELOC_PPC_EMB_RELSDA,
2188   BFD_RELOC_PPC64_HIGHER,
2189   BFD_RELOC_PPC64_HIGHER_S,
2190   BFD_RELOC_PPC64_HIGHEST,
2191   BFD_RELOC_PPC64_HIGHEST_S,
2192   BFD_RELOC_PPC64_TOC16_LO,
2193   BFD_RELOC_PPC64_TOC16_HI,
2194   BFD_RELOC_PPC64_TOC16_HA,
2195   BFD_RELOC_PPC64_TOC,
2196   BFD_RELOC_PPC64_PLTGOT16   ,
2197   BFD_RELOC_PPC64_PLTGOT16_LO,
2198   BFD_RELOC_PPC64_PLTGOT16_HI,
2199   BFD_RELOC_PPC64_PLTGOT16_HA,
2200   BFD_RELOC_PPC64_ADDR16_DS,
2201   BFD_RELOC_PPC64_ADDR16_LO_DS,
2202   BFD_RELOC_PPC64_GOT16_DS,
2203   BFD_RELOC_PPC64_GOT16_LO_DS,
2204   BFD_RELOC_PPC64_PLT16_LO_DS,
2205   BFD_RELOC_PPC64_SECTOFF_DS,
2206   BFD_RELOC_PPC64_SECTOFF_LO_DS,
2207   BFD_RELOC_PPC64_TOC16_DS,
2208   BFD_RELOC_PPC64_TOC16_LO_DS,
2209   BFD_RELOC_PPC64_PLTGOT16_DS,
2210   BFD_RELOC_PPC64_PLTGOT16_LO_DS,
2211
2212 /* IBM 370/390 relocations */
2213   BFD_RELOC_I370_D12,
2214
2215 /* The type of reloc used to build a contructor table - at the moment
2216 probably a 32 bit wide absolute relocation, but the target can choose.
2217 It generally does map to one of the other relocation types. */
2218   BFD_RELOC_CTOR,
2219
2220 /* ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2221 not stored in the instruction. */
2222   BFD_RELOC_ARM_PCREL_BRANCH,
2223
2224 /* ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2225 not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2226 field in the instruction. */
2227   BFD_RELOC_ARM_PCREL_BLX,
2228
2229 /* Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2230 not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2231 field in the instruction. */
2232   BFD_RELOC_THUMB_PCREL_BLX,
2233
2234 /* These relocs are only used within the ARM assembler.  They are not
2235 (at present) written to any object files. */
2236   BFD_RELOC_ARM_IMMEDIATE,
2237   BFD_RELOC_ARM_ADRL_IMMEDIATE,
2238   BFD_RELOC_ARM_OFFSET_IMM,
2239   BFD_RELOC_ARM_SHIFT_IMM,
2240   BFD_RELOC_ARM_SWI,
2241   BFD_RELOC_ARM_MULTI,
2242   BFD_RELOC_ARM_CP_OFF_IMM,
2243   BFD_RELOC_ARM_ADR_IMM,
2244   BFD_RELOC_ARM_LDR_IMM,
2245   BFD_RELOC_ARM_LITERAL,
2246   BFD_RELOC_ARM_IN_POOL,
2247   BFD_RELOC_ARM_OFFSET_IMM8,
2248   BFD_RELOC_ARM_HWLITERAL,
2249   BFD_RELOC_ARM_THUMB_ADD,
2250   BFD_RELOC_ARM_THUMB_IMM,
2251   BFD_RELOC_ARM_THUMB_SHIFT,
2252   BFD_RELOC_ARM_THUMB_OFFSET,
2253   BFD_RELOC_ARM_GOT12,
2254   BFD_RELOC_ARM_GOT32,
2255   BFD_RELOC_ARM_JUMP_SLOT,
2256   BFD_RELOC_ARM_COPY,
2257   BFD_RELOC_ARM_GLOB_DAT,
2258   BFD_RELOC_ARM_PLT32,
2259   BFD_RELOC_ARM_RELATIVE,
2260   BFD_RELOC_ARM_GOTOFF,
2261   BFD_RELOC_ARM_GOTPC,
2262
2263 /* Hitachi SH relocs.  Not all of these appear in object files. */
2264   BFD_RELOC_SH_PCDISP8BY2,
2265   BFD_RELOC_SH_PCDISP12BY2,
2266   BFD_RELOC_SH_IMM4,
2267   BFD_RELOC_SH_IMM4BY2,
2268   BFD_RELOC_SH_IMM4BY4,
2269   BFD_RELOC_SH_IMM8,
2270   BFD_RELOC_SH_IMM8BY2,
2271   BFD_RELOC_SH_IMM8BY4,
2272   BFD_RELOC_SH_PCRELIMM8BY2,
2273   BFD_RELOC_SH_PCRELIMM8BY4,
2274   BFD_RELOC_SH_SWITCH16,
2275   BFD_RELOC_SH_SWITCH32,
2276   BFD_RELOC_SH_USES,
2277   BFD_RELOC_SH_COUNT,
2278   BFD_RELOC_SH_ALIGN,
2279   BFD_RELOC_SH_CODE,
2280   BFD_RELOC_SH_DATA,
2281   BFD_RELOC_SH_LABEL,
2282   BFD_RELOC_SH_LOOP_START,
2283   BFD_RELOC_SH_LOOP_END,
2284   BFD_RELOC_SH_COPY,
2285   BFD_RELOC_SH_GLOB_DAT,
2286   BFD_RELOC_SH_JMP_SLOT,
2287   BFD_RELOC_SH_RELATIVE,
2288   BFD_RELOC_SH_GOTPC,
2289
2290 /* Thumb 23-, 12- and 9-bit pc-relative branches.  The lowest bit must
2291 be zero and is not stored in the instruction. */
2292   BFD_RELOC_THUMB_PCREL_BRANCH9,
2293   BFD_RELOC_THUMB_PCREL_BRANCH12,
2294   BFD_RELOC_THUMB_PCREL_BRANCH23,
2295
2296 /* ARC Cores relocs.
2297 ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
2298 not stored in the instruction.  The high 20 bits are installed in bits 26
2299 through 7 of the instruction. */
2300   BFD_RELOC_ARC_B22_PCREL,
2301
2302 /* ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
2303 stored in the instruction.  The high 24 bits are installed in bits 23
2304 through 0. */
2305   BFD_RELOC_ARC_B26,
2306
2307 /* Mitsubishi D10V relocs.
2308 This is a 10-bit reloc with the right 2 bits
2309 assumed to be 0. */
2310   BFD_RELOC_D10V_10_PCREL_R,
2311
2312 /* Mitsubishi D10V relocs.
2313 This is a 10-bit reloc with the right 2 bits
2314 assumed to be 0.  This is the same as the previous reloc
2315 except it is in the left container, i.e.,
2316 shifted left 15 bits. */
2317   BFD_RELOC_D10V_10_PCREL_L,
2318
2319 /* This is an 18-bit reloc with the right 2 bits
2320 assumed to be 0. */
2321   BFD_RELOC_D10V_18,
2322
2323 /* This is an 18-bit reloc with the right 2 bits
2324 assumed to be 0. */
2325   BFD_RELOC_D10V_18_PCREL,
2326
2327 /* Mitsubishi D30V relocs.
2328 This is a 6-bit absolute reloc. */
2329   BFD_RELOC_D30V_6,
2330
2331 /* This is a 6-bit pc-relative reloc with
2332 the right 3 bits assumed to be 0. */
2333   BFD_RELOC_D30V_9_PCREL,
2334
2335 /* This is a 6-bit pc-relative reloc with
2336 the right 3 bits assumed to be 0. Same
2337 as the previous reloc but on the right side
2338 of the container. */
2339   BFD_RELOC_D30V_9_PCREL_R,
2340
2341 /* This is a 12-bit absolute reloc with the
2342 right 3 bitsassumed to be 0. */
2343   BFD_RELOC_D30V_15,
2344
2345 /* This is a 12-bit pc-relative reloc with
2346 the right 3 bits assumed to be 0. */
2347   BFD_RELOC_D30V_15_PCREL,
2348
2349 /* This is a 12-bit pc-relative reloc with
2350 the right 3 bits assumed to be 0. Same
2351 as the previous reloc but on the right side
2352 of the container. */
2353   BFD_RELOC_D30V_15_PCREL_R,
2354
2355 /* This is an 18-bit absolute reloc with
2356 the right 3 bits assumed to be 0. */
2357   BFD_RELOC_D30V_21,
2358
2359 /* This is an 18-bit pc-relative reloc with
2360 the right 3 bits assumed to be 0. */
2361   BFD_RELOC_D30V_21_PCREL,
2362
2363 /* This is an 18-bit pc-relative reloc with
2364 the right 3 bits assumed to be 0. Same
2365 as the previous reloc but on the right side
2366 of the container. */
2367   BFD_RELOC_D30V_21_PCREL_R,
2368
2369 /* This is a 32-bit absolute reloc. */
2370   BFD_RELOC_D30V_32,
2371
2372 /* This is a 32-bit pc-relative reloc. */
2373   BFD_RELOC_D30V_32_PCREL,
2374
2375 /* Mitsubishi M32R relocs.
2376 This is a 24 bit absolute address. */
2377   BFD_RELOC_M32R_24,
2378
2379 /* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
2380   BFD_RELOC_M32R_10_PCREL,
2381
2382 /* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
2383   BFD_RELOC_M32R_18_PCREL,
2384
2385 /* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
2386   BFD_RELOC_M32R_26_PCREL,
2387
2388 /* This is a 16-bit reloc containing the high 16 bits of an address
2389 used when the lower 16 bits are treated as unsigned. */
2390   BFD_RELOC_M32R_HI16_ULO,
2391
2392 /* This is a 16-bit reloc containing the high 16 bits of an address
2393 used when the lower 16 bits are treated as signed. */
2394   BFD_RELOC_M32R_HI16_SLO,
2395
2396 /* This is a 16-bit reloc containing the lower 16 bits of an address. */
2397   BFD_RELOC_M32R_LO16,
2398
2399 /* This is a 16-bit reloc containing the small data area offset for use in
2400 add3, load, and store instructions. */
2401   BFD_RELOC_M32R_SDA16,
2402
2403 /* This is a 9-bit reloc */
2404   BFD_RELOC_V850_9_PCREL,
2405
2406 /* This is a 22-bit reloc */
2407   BFD_RELOC_V850_22_PCREL,
2408
2409 /* This is a 16 bit offset from the short data area pointer. */
2410   BFD_RELOC_V850_SDA_16_16_OFFSET,
2411
2412 /* This is a 16 bit offset (of which only 15 bits are used) from the
2413 short data area pointer. */
2414   BFD_RELOC_V850_SDA_15_16_OFFSET,
2415
2416 /* This is a 16 bit offset from the zero data area pointer. */
2417   BFD_RELOC_V850_ZDA_16_16_OFFSET,
2418
2419 /* This is a 16 bit offset (of which only 15 bits are used) from the
2420 zero data area pointer. */
2421   BFD_RELOC_V850_ZDA_15_16_OFFSET,
2422
2423 /* This is an 8 bit offset (of which only 6 bits are used) from the
2424 tiny data area pointer. */
2425   BFD_RELOC_V850_TDA_6_8_OFFSET,
2426
2427 /* This is an 8bit offset (of which only 7 bits are used) from the tiny
2428 data area pointer. */
2429   BFD_RELOC_V850_TDA_7_8_OFFSET,
2430
2431 /* This is a 7 bit offset from the tiny data area pointer. */
2432   BFD_RELOC_V850_TDA_7_7_OFFSET,
2433
2434 /* This is a 16 bit offset from the tiny data area pointer. */
2435   BFD_RELOC_V850_TDA_16_16_OFFSET,
2436
2437 /* This is a 5 bit offset (of which only 4 bits are used) from the tiny
2438 data area pointer. */
2439   BFD_RELOC_V850_TDA_4_5_OFFSET,
2440
2441 /* This is a 4 bit offset from the tiny data area pointer. */
2442   BFD_RELOC_V850_TDA_4_4_OFFSET,
2443
2444 /* This is a 16 bit offset from the short data area pointer, with the
2445 bits placed non-contigously in the instruction. */
2446   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET,
2447
2448 /* This is a 16 bit offset from the zero data area pointer, with the
2449 bits placed non-contigously in the instruction. */
2450   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET,
2451
2452 /* This is a 6 bit offset from the call table base pointer. */
2453   BFD_RELOC_V850_CALLT_6_7_OFFSET,
2454
2455 /* This is a 16 bit offset from the call table base pointer. */
2456   BFD_RELOC_V850_CALLT_16_16_OFFSET,
2457
2458
2459 /* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2460 instruction. */
2461   BFD_RELOC_MN10300_32_PCREL,
2462
2463 /* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2464 instruction. */
2465   BFD_RELOC_MN10300_16_PCREL,
2466
2467 /* This is a 8bit DP reloc for the tms320c30, where the most
2468 significant 8 bits of a 24 bit word are placed into the least
2469 significant 8 bits of the opcode. */
2470   BFD_RELOC_TIC30_LDP,
2471
2472 /* This is a 7bit reloc for the tms320c54x, where the least
2473 significant 7 bits of a 16 bit word are placed into the least
2474 significant 7 bits of the opcode. */
2475   BFD_RELOC_TIC54X_PARTLS7,
2476
2477 /* This is a 9bit DP reloc for the tms320c54x, where the most
2478 significant 9 bits of a 16 bit word are placed into the least
2479 significant 9 bits of the opcode. */
2480   BFD_RELOC_TIC54X_PARTMS9,
2481
2482 /* This is an extended address 23-bit reloc for the tms320c54x. */
2483   BFD_RELOC_TIC54X_23,
2484
2485 /* This is a 16-bit reloc for the tms320c54x, where the least
2486 significant 16 bits of a 23-bit extended address are placed into
2487 the opcode. */
2488   BFD_RELOC_TIC54X_16_OF_23,
2489
2490 /* This is a reloc for the tms320c54x, where the most
2491 significant 7 bits of a 23-bit extended address are placed into
2492 the opcode. */
2493   BFD_RELOC_TIC54X_MS7_OF_23,
2494
2495 /* This is a 48 bit reloc for the FR30 that stores 32 bits. */
2496   BFD_RELOC_FR30_48,
2497
2498 /* This is a 32 bit reloc for the FR30 that stores 20 bits split up into
2499 two sections. */
2500   BFD_RELOC_FR30_20,
2501
2502 /* This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
2503 4 bits. */
2504   BFD_RELOC_FR30_6_IN_4,
2505
2506 /* This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
2507 into 8 bits. */
2508   BFD_RELOC_FR30_8_IN_8,
2509
2510 /* This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
2511 into 8 bits. */
2512   BFD_RELOC_FR30_9_IN_8,
2513
2514 /* This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
2515 into 8 bits. */
2516   BFD_RELOC_FR30_10_IN_8,
2517
2518 /* This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
2519 short offset into 8 bits. */
2520   BFD_RELOC_FR30_9_PCREL,
2521
2522 /* This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
2523 short offset into 11 bits. */
2524   BFD_RELOC_FR30_12_PCREL,
2525
2526 /* Motorola Mcore relocations. */
2527   BFD_RELOC_MCORE_PCREL_IMM8BY4,
2528   BFD_RELOC_MCORE_PCREL_IMM11BY2,
2529   BFD_RELOC_MCORE_PCREL_IMM4BY2,
2530   BFD_RELOC_MCORE_PCREL_32,
2531   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2,
2532   BFD_RELOC_MCORE_RVA,
2533
2534 /* This is a 16 bit reloc for the AVR that stores 8 bit pc relative
2535 short offset into 7 bits. */
2536   BFD_RELOC_AVR_7_PCREL,
2537
2538 /* This is a 16 bit reloc for the AVR that stores 13 bit pc relative
2539 short offset into 12 bits. */
2540   BFD_RELOC_AVR_13_PCREL,
2541
2542 /* This is a 16 bit reloc for the AVR that stores 17 bit value (usually
2543 program memory address) into 16 bits. */
2544   BFD_RELOC_AVR_16_PM,
2545
2546 /* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
2547 data memory address) into 8 bit immediate value of LDI insn. */
2548   BFD_RELOC_AVR_LO8_LDI,
2549
2550 /* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
2551 of data memory address) into 8 bit immediate value of LDI insn. */
2552   BFD_RELOC_AVR_HI8_LDI,
2553
2554 /* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
2555 of program memory address) into 8 bit immediate value of LDI insn. */
2556   BFD_RELOC_AVR_HH8_LDI,
2557
2558 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2559 (usually data memory address) into 8 bit immediate value of SUBI insn. */
2560   BFD_RELOC_AVR_LO8_LDI_NEG,
2561
2562 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2563 (high 8 bit of data memory address) into 8 bit immediate value of
2564 SUBI insn. */
2565   BFD_RELOC_AVR_HI8_LDI_NEG,
2566
2567 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2568 (most high 8 bit of program memory address) into 8 bit immediate value
2569 of LDI or SUBI insn. */
2570   BFD_RELOC_AVR_HH8_LDI_NEG,
2571
2572 /* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
2573 command address) into 8 bit immediate value of LDI insn. */
2574   BFD_RELOC_AVR_LO8_LDI_PM,
2575
2576 /* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
2577 of command address) into 8 bit immediate value of LDI insn. */
2578   BFD_RELOC_AVR_HI8_LDI_PM,
2579
2580 /* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
2581 of command address) into 8 bit immediate value of LDI insn. */
2582   BFD_RELOC_AVR_HH8_LDI_PM,
2583
2584 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2585 (usually command address) into 8 bit immediate value of SUBI insn. */
2586   BFD_RELOC_AVR_LO8_LDI_PM_NEG,
2587
2588 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2589 (high 8 bit of 16 bit command address) into 8 bit immediate value
2590 of SUBI insn. */
2591   BFD_RELOC_AVR_HI8_LDI_PM_NEG,
2592
2593 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2594 (high 6 bit of 22 bit command address) into 8 bit immediate
2595 value of SUBI insn. */
2596   BFD_RELOC_AVR_HH8_LDI_PM_NEG,
2597
2598 /* This is a 32 bit reloc for the AVR that stores 23 bit value
2599 into 22 bits. */
2600   BFD_RELOC_AVR_CALL,
2601
2602 /* Direct 12 bit. */
2603   BFD_RELOC_390_12,
2604
2605 /* 12 bit GOT offset. */
2606   BFD_RELOC_390_GOT12,
2607
2608 /* 32 bit PC relative PLT address. */
2609   BFD_RELOC_390_PLT32,
2610
2611 /* Copy symbol at runtime. */
2612   BFD_RELOC_390_COPY,
2613
2614 /* Create GOT entry. */
2615   BFD_RELOC_390_GLOB_DAT,
2616
2617 /* Create PLT entry. */
2618   BFD_RELOC_390_JMP_SLOT,
2619
2620 /* Adjust by program base. */
2621   BFD_RELOC_390_RELATIVE,
2622
2623 /* 32 bit PC relative offset to GOT. */
2624   BFD_RELOC_390_GOTPC,
2625
2626 /* 16 bit GOT offset. */
2627   BFD_RELOC_390_GOT16,
2628
2629 /* PC relative 16 bit shifted by 1. */
2630   BFD_RELOC_390_PC16DBL,
2631
2632 /* 16 bit PC rel. PLT shifted by 1. */
2633   BFD_RELOC_390_PLT16DBL,
2634
2635 /* PC relative 32 bit shifted by 1. */
2636   BFD_RELOC_390_PC32DBL,
2637
2638 /* 32 bit PC rel. PLT shifted by 1. */
2639   BFD_RELOC_390_PLT32DBL,
2640
2641 /* 32 bit PC rel. GOT shifted by 1. */
2642   BFD_RELOC_390_GOTPCDBL,
2643
2644 /* 64 bit GOT offset. */
2645   BFD_RELOC_390_GOT64,
2646
2647 /* 64 bit PC relative PLT address. */
2648   BFD_RELOC_390_PLT64,
2649
2650 /* 32 bit rel. offset to GOT entry. */
2651   BFD_RELOC_390_GOTENT,
2652
2653 /* These two relocations are used by the linker to determine which of
2654 the entries in a C++ virtual function table are actually used.  When
2655 the --gc-sections option is given, the linker will zero out the entries
2656 that are not used, so that the code for those functions need not be
2657 included in the output.
2658
2659 VTABLE_INHERIT is a zero-space relocation used to describe to the
2660 linker the inheritence tree of a C++ virtual function table.  The
2661 relocation's symbol should be the parent class' vtable, and the
2662 relocation should be located at the child vtable.
2663
2664 VTABLE_ENTRY is a zero-space relocation that describes the use of a
2665 virtual function table entry.  The reloc's symbol should refer to the
2666 table of the class mentioned in the code.  Off of that base, an offset
2667 describes the entry that is being used.  For Rela hosts, this offset
2668 is stored in the reloc's addend.  For Rel hosts, we are forced to put
2669 this offset in the reloc's section offset. */
2670   BFD_RELOC_VTABLE_INHERIT,
2671   BFD_RELOC_VTABLE_ENTRY,
2672
2673 /* Intel IA64 Relocations. */
2674   BFD_RELOC_IA64_IMM14,
2675   BFD_RELOC_IA64_IMM22,
2676   BFD_RELOC_IA64_IMM64,
2677   BFD_RELOC_IA64_DIR32MSB,
2678   BFD_RELOC_IA64_DIR32LSB,
2679   BFD_RELOC_IA64_DIR64MSB,
2680   BFD_RELOC_IA64_DIR64LSB,
2681   BFD_RELOC_IA64_GPREL22,
2682   BFD_RELOC_IA64_GPREL64I,
2683   BFD_RELOC_IA64_GPREL32MSB,
2684   BFD_RELOC_IA64_GPREL32LSB,
2685   BFD_RELOC_IA64_GPREL64MSB,
2686   BFD_RELOC_IA64_GPREL64LSB,
2687   BFD_RELOC_IA64_LTOFF22,
2688   BFD_RELOC_IA64_LTOFF64I,
2689   BFD_RELOC_IA64_PLTOFF22,
2690   BFD_RELOC_IA64_PLTOFF64I,
2691   BFD_RELOC_IA64_PLTOFF64MSB,
2692   BFD_RELOC_IA64_PLTOFF64LSB,
2693   BFD_RELOC_IA64_FPTR64I,
2694   BFD_RELOC_IA64_FPTR32MSB,
2695   BFD_RELOC_IA64_FPTR32LSB,
2696   BFD_RELOC_IA64_FPTR64MSB,
2697   BFD_RELOC_IA64_FPTR64LSB,
2698   BFD_RELOC_IA64_PCREL21B,
2699   BFD_RELOC_IA64_PCREL21BI,
2700   BFD_RELOC_IA64_PCREL21M,
2701   BFD_RELOC_IA64_PCREL21F,
2702   BFD_RELOC_IA64_PCREL22,
2703   BFD_RELOC_IA64_PCREL60B,
2704   BFD_RELOC_IA64_PCREL64I,
2705   BFD_RELOC_IA64_PCREL32MSB,
2706   BFD_RELOC_IA64_PCREL32LSB,
2707   BFD_RELOC_IA64_PCREL64MSB,
2708   BFD_RELOC_IA64_PCREL64LSB,
2709   BFD_RELOC_IA64_LTOFF_FPTR22,
2710   BFD_RELOC_IA64_LTOFF_FPTR64I,
2711   BFD_RELOC_IA64_LTOFF_FPTR32MSB,
2712   BFD_RELOC_IA64_LTOFF_FPTR32LSB,
2713   BFD_RELOC_IA64_LTOFF_FPTR64MSB,
2714   BFD_RELOC_IA64_LTOFF_FPTR64LSB,
2715   BFD_RELOC_IA64_SEGREL32MSB,
2716   BFD_RELOC_IA64_SEGREL32LSB,
2717   BFD_RELOC_IA64_SEGREL64MSB,
2718   BFD_RELOC_IA64_SEGREL64LSB,
2719   BFD_RELOC_IA64_SECREL32MSB,
2720   BFD_RELOC_IA64_SECREL32LSB,
2721   BFD_RELOC_IA64_SECREL64MSB,
2722   BFD_RELOC_IA64_SECREL64LSB,
2723   BFD_RELOC_IA64_REL32MSB,
2724   BFD_RELOC_IA64_REL32LSB,
2725   BFD_RELOC_IA64_REL64MSB,
2726   BFD_RELOC_IA64_REL64LSB,
2727   BFD_RELOC_IA64_LTV32MSB,
2728   BFD_RELOC_IA64_LTV32LSB,
2729   BFD_RELOC_IA64_LTV64MSB,
2730   BFD_RELOC_IA64_LTV64LSB,
2731   BFD_RELOC_IA64_IPLTMSB,
2732   BFD_RELOC_IA64_IPLTLSB,
2733   BFD_RELOC_IA64_COPY,
2734   BFD_RELOC_IA64_TPREL22,
2735   BFD_RELOC_IA64_TPREL64MSB,
2736   BFD_RELOC_IA64_TPREL64LSB,
2737   BFD_RELOC_IA64_LTOFF_TP22,
2738   BFD_RELOC_IA64_LTOFF22X,
2739   BFD_RELOC_IA64_LDXMOV,
2740
2741 /* Motorola 68HC11 reloc.
2742 This is the 8 bits high part of an absolute address. */
2743   BFD_RELOC_M68HC11_HI8,
2744
2745 /* Motorola 68HC11 reloc.
2746 This is the 8 bits low part of an absolute address. */
2747   BFD_RELOC_M68HC11_LO8,
2748
2749 /* Motorola 68HC11 reloc.
2750 This is the 3 bits of a value. */
2751   BFD_RELOC_M68HC11_3B,
2752
2753 /* These relocs are only used within the CRIS assembler.  They are not
2754 (at present) written to any object files. */
2755   BFD_RELOC_CRIS_BDISP8,
2756   BFD_RELOC_CRIS_UNSIGNED_5,
2757   BFD_RELOC_CRIS_SIGNED_6,
2758   BFD_RELOC_CRIS_UNSIGNED_6,
2759   BFD_RELOC_CRIS_UNSIGNED_4,
2760
2761 /* Relocs used in ELF shared libraries for CRIS. */
2762   BFD_RELOC_CRIS_COPY,
2763   BFD_RELOC_CRIS_GLOB_DAT,
2764   BFD_RELOC_CRIS_JUMP_SLOT,
2765   BFD_RELOC_CRIS_RELATIVE,
2766
2767 /* 32-bit offset to symbol-entry within GOT. */
2768   BFD_RELOC_CRIS_32_GOT,
2769
2770 /* 16-bit offset to symbol-entry within GOT. */
2771   BFD_RELOC_CRIS_16_GOT,
2772
2773 /* 32-bit offset to symbol-entry within GOT, with PLT handling. */
2774   BFD_RELOC_CRIS_32_GOTPLT,
2775
2776 /* 16-bit offset to symbol-entry within GOT, with PLT handling. */
2777   BFD_RELOC_CRIS_16_GOTPLT,
2778
2779 /* 32-bit offset to symbol, relative to GOT. */
2780   BFD_RELOC_CRIS_32_GOTREL,
2781
2782 /* 32-bit offset to symbol with PLT entry, relative to GOT. */
2783   BFD_RELOC_CRIS_32_PLT_GOTREL,
2784
2785 /* 32-bit offset to symbol with PLT entry, relative to this relocation. */
2786   BFD_RELOC_CRIS_32_PLT_PCREL,
2787
2788 /* Intel i860 Relocations. */
2789   BFD_RELOC_860_COPY,
2790   BFD_RELOC_860_GLOB_DAT,
2791   BFD_RELOC_860_JUMP_SLOT,
2792   BFD_RELOC_860_RELATIVE,
2793   BFD_RELOC_860_PC26,
2794   BFD_RELOC_860_PLT26,
2795   BFD_RELOC_860_PC16,
2796   BFD_RELOC_860_LOW0,
2797   BFD_RELOC_860_SPLIT0,
2798   BFD_RELOC_860_LOW1,
2799   BFD_RELOC_860_SPLIT1,
2800   BFD_RELOC_860_LOW2,
2801   BFD_RELOC_860_SPLIT2,
2802   BFD_RELOC_860_LOW3,
2803   BFD_RELOC_860_LOGOT0,
2804   BFD_RELOC_860_SPGOT0,
2805   BFD_RELOC_860_LOGOT1,
2806   BFD_RELOC_860_SPGOT1,
2807   BFD_RELOC_860_LOGOTOFF0,
2808   BFD_RELOC_860_SPGOTOFF0,
2809   BFD_RELOC_860_LOGOTOFF1,
2810   BFD_RELOC_860_SPGOTOFF1,
2811   BFD_RELOC_860_LOGOTOFF2,
2812   BFD_RELOC_860_LOGOTOFF3,
2813   BFD_RELOC_860_LOPC,
2814   BFD_RELOC_860_HIGHADJ,
2815   BFD_RELOC_860_HAGOT,
2816   BFD_RELOC_860_HAGOTOFF,
2817   BFD_RELOC_860_HAPC,
2818   BFD_RELOC_860_HIGH,
2819   BFD_RELOC_860_HIGOT,
2820   BFD_RELOC_860_HIGOTOFF,
2821
2822 /* OpenRISC Relocations. */
2823   BFD_RELOC_OPENRISC_ABS_26,
2824   BFD_RELOC_OPENRISC_REL_26,
2825   BFD_RELOC_UNUSED };
2826 typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
2827 reloc_howto_type *
2828 bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
2829
2830 const char *
2831 bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
2832
2833
2834 typedef struct symbol_cache_entry
2835 {
2836        /* A pointer to the BFD which owns the symbol. This information
2837           is necessary so that a back end can work out what additional
2838           information (invisible to the application writer) is carried
2839           with the symbol.
2840
2841           This field is *almost* redundant, since you can use section->owner
2842           instead, except that some symbols point to the global sections
2843           bfd_{abs,com,und}_section.  This could be fixed by making
2844           these globals be per-bfd (or per-target-flavor).  FIXME. */
2845
2846   struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
2847
2848        /* The text of the symbol. The name is left alone, and not copied; the
2849           application may not alter it. */
2850   CONST char *name;
2851
2852        /* The value of the symbol.  This really should be a union of a
2853           numeric value with a pointer, since some flags indicate that
2854           a pointer to another symbol is stored here.  */
2855   symvalue value;
2856
2857        /* Attributes of a symbol: */
2858
2859 #define BSF_NO_FLAGS    0x00
2860
2861        /* The symbol has local scope; <<static>> in <<C>>. The value
2862           is the offset into the section of the data. */
2863 #define BSF_LOCAL      0x01
2864
2865        /* The symbol has global scope; initialized data in <<C>>. The
2866           value is the offset into the section of the data. */
2867 #define BSF_GLOBAL     0x02
2868
2869        /* The symbol has global scope and is exported. The value is
2870           the offset into the section of the data. */
2871 #define BSF_EXPORT     BSF_GLOBAL /* no real difference */
2872
2873        /* A normal C symbol would be one of:
2874           <<BSF_LOCAL>>, <<BSF_FORT_COMM>>,  <<BSF_UNDEFINED>> or
2875           <<BSF_GLOBAL>> */
2876
2877        /* The symbol is a debugging record. The value has an arbitary
2878           meaning, unless BSF_DEBUGGING_RELOC is also set.  */
2879 #define BSF_DEBUGGING  0x08
2880
2881        /* The symbol denotes a function entry point.  Used in ELF,
2882           perhaps others someday.  */
2883 #define BSF_FUNCTION    0x10
2884
2885        /* Used by the linker. */
2886 #define BSF_KEEP        0x20
2887 #define BSF_KEEP_G      0x40
2888
2889        /* A weak global symbol, overridable without warnings by
2890           a regular global symbol of the same name.  */
2891 #define BSF_WEAK        0x80
2892
2893        /* This symbol was created to point to a section, e.g. ELF's
2894           STT_SECTION symbols.  */
2895 #define BSF_SECTION_SYM 0x100
2896
2897        /* The symbol used to be a common symbol, but now it is
2898           allocated. */
2899 #define BSF_OLD_COMMON  0x200
2900
2901        /* The default value for common data. */
2902 #define BFD_FORT_COMM_DEFAULT_VALUE 0
2903
2904        /* In some files the type of a symbol sometimes alters its
2905           location in an output file - ie in coff a <<ISFCN>> symbol
2906           which is also <<C_EXT>> symbol appears where it was
2907           declared and not at the end of a section.  This bit is set
2908           by the target BFD part to convey this information. */
2909
2910 #define BSF_NOT_AT_END    0x400
2911
2912        /* Signal that the symbol is the label of constructor section. */
2913 #define BSF_CONSTRUCTOR   0x800
2914
2915        /* Signal that the symbol is a warning symbol.  The name is a
2916           warning.  The name of the next symbol is the one to warn about;
2917           if a reference is made to a symbol with the same name as the next
2918           symbol, a warning is issued by the linker. */
2919 #define BSF_WARNING       0x1000
2920
2921        /* Signal that the symbol is indirect.  This symbol is an indirect
2922           pointer to the symbol with the same name as the next symbol. */
2923 #define BSF_INDIRECT      0x2000
2924
2925        /* BSF_FILE marks symbols that contain a file name.  This is used
2926           for ELF STT_FILE symbols.  */
2927 #define BSF_FILE          0x4000
2928
2929        /* Symbol is from dynamic linking information.  */
2930 #define BSF_DYNAMIC       0x8000
2931
2932        /* The symbol denotes a data object.  Used in ELF, and perhaps
2933           others someday.  */
2934 #define BSF_OBJECT        0x10000
2935
2936        /* This symbol is a debugging symbol.  The value is the offset
2937           into the section of the data.  BSF_DEBUGGING should be set
2938           as well.  */
2939 #define BSF_DEBUGGING_RELOC 0x20000
2940
2941   flagword flags;
2942
2943        /* A pointer to the section to which this symbol is
2944           relative.  This will always be non NULL, there are special
2945           sections for undefined and absolute symbols.  */
2946   struct sec *section;
2947
2948        /* Back end special data.  */
2949   union
2950     {
2951       PTR p;
2952       bfd_vma i;
2953     } udata;
2954
2955 } asymbol;
2956 #define bfd_get_symtab_upper_bound(abfd) \
2957      BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
2958 boolean
2959 bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym));
2960
2961 boolean
2962 bfd_is_local_label_name PARAMS ((bfd *abfd, const char *name));
2963
2964 #define bfd_is_local_label_name(abfd, name) \
2965      BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
2966 #define bfd_canonicalize_symtab(abfd, location) \
2967      BFD_SEND (abfd, _bfd_canonicalize_symtab,\
2968                   (abfd, location))
2969 boolean
2970 bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
2971
2972 void
2973 bfd_print_symbol_vandf PARAMS ((bfd *abfd, PTR file, asymbol *symbol));
2974
2975 #define bfd_make_empty_symbol(abfd) \
2976      BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
2977 #define bfd_make_debug_symbol(abfd,ptr,size) \
2978         BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
2979 int
2980 bfd_decode_symclass PARAMS ((asymbol *symbol));
2981
2982 boolean
2983 bfd_is_undefined_symclass PARAMS ((int symclass));
2984
2985 void
2986 bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret));
2987
2988 boolean
2989 bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym));
2990
2991 #define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
2992      BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
2993                (ibfd, isymbol, obfd, osymbol))
2994 struct _bfd
2995 {
2996     /* The filename the application opened the BFD with.  */
2997     const char *filename;
2998
2999     /* A pointer to the target jump table.             */
3000     const struct bfd_target *xvec;
3001
3002     /* To avoid dragging too many header files into every file that
3003        includes `<<bfd.h>>', IOSTREAM has been declared as a "char
3004        *", and MTIME as a "long".  Their correct types, to which they
3005        are cast when used, are "FILE *" and "time_t".    The iostream
3006        is the result of an fopen on the filename.  However, if the
3007        BFD_IN_MEMORY flag is set, then iostream is actually a pointer
3008        to a bfd_in_memory struct.  */
3009     PTR iostream;
3010
3011     /* Is the file descriptor being cached?  That is, can it be closed as
3012        needed, and re-opened when accessed later?  */
3013
3014     boolean cacheable;
3015
3016     /* Marks whether there was a default target specified when the
3017        BFD was opened. This is used to select which matching algorithm
3018        to use to choose the back end. */
3019
3020     boolean target_defaulted;
3021
3022     /* The caching routines use these to maintain a
3023        least-recently-used list of BFDs */
3024
3025     struct _bfd *lru_prev, *lru_next;
3026
3027     /* When a file is closed by the caching routines, BFD retains
3028        state information on the file here: */
3029
3030     file_ptr where;
3031
3032     /* and here: (``once'' means at least once) */
3033
3034     boolean opened_once;
3035
3036     /* Set if we have a locally maintained mtime value, rather than
3037        getting it from the file each time: */
3038
3039     boolean mtime_set;
3040
3041     /* File modified time, if mtime_set is true: */
3042
3043     long mtime;
3044
3045     /* Reserved for an unimplemented file locking extension.*/
3046
3047     int ifd;
3048
3049     /* The format which belongs to the BFD. (object, core, etc.) */
3050
3051     bfd_format format;
3052
3053     /* The direction the BFD was opened with*/
3054
3055     enum bfd_direction {no_direction = 0,
3056                         read_direction = 1,
3057                         write_direction = 2,
3058                         both_direction = 3} direction;
3059
3060     /* Format_specific flags*/
3061
3062     flagword flags;
3063
3064     /* Currently my_archive is tested before adding origin to
3065        anything. I believe that this can become always an add of
3066        origin, with origin set to 0 for non archive files.   */
3067
3068     file_ptr origin;
3069
3070     /* Remember when output has begun, to stop strange things
3071        from happening. */
3072     boolean output_has_begun;
3073
3074     /* Pointer to linked list of sections*/
3075     struct sec  *sections;
3076
3077     /* The number of sections */
3078     unsigned int section_count;
3079
3080     /* Stuff only useful for object files:
3081        The start address. */
3082     bfd_vma start_address;
3083
3084     /* Used for input and output*/
3085     unsigned int symcount;
3086
3087     /* Symbol table for output BFD (with symcount entries) */
3088     struct symbol_cache_entry  **outsymbols;
3089
3090     /* Pointer to structure which contains architecture information*/
3091     const struct bfd_arch_info *arch_info;
3092
3093     /* Stuff only useful for archives:*/
3094     PTR arelt_data;
3095     struct _bfd *my_archive;     /* The containing archive BFD.  */
3096     struct _bfd *next;           /* The next BFD in the archive.  */
3097     struct _bfd *archive_head;   /* The first BFD in the archive.  */
3098     boolean has_armap;
3099
3100     /* A chain of BFD structures involved in a link.  */
3101     struct _bfd *link_next;
3102
3103     /* A field used by _bfd_generic_link_add_archive_symbols.  This will
3104        be used only for archive elements.  */
3105     int archive_pass;
3106
3107     /* Used by the back end to hold private data. */
3108
3109     union
3110       {
3111       struct aout_data_struct *aout_data;
3112       struct artdata *aout_ar_data;
3113       struct _oasys_data *oasys_obj_data;
3114       struct _oasys_ar_data *oasys_ar_data;
3115       struct coff_tdata *coff_obj_data;
3116       struct pe_tdata *pe_obj_data;
3117       struct xcoff_tdata *xcoff_obj_data;
3118       struct ecoff_tdata *ecoff_obj_data;
3119       struct ieee_data_struct *ieee_data;
3120       struct ieee_ar_data_struct *ieee_ar_data;
3121       struct srec_data_struct *srec_data;
3122       struct ihex_data_struct *ihex_data;
3123       struct tekhex_data_struct *tekhex_data;
3124       struct elf_obj_tdata *elf_obj_data;
3125       struct nlm_obj_tdata *nlm_obj_data;
3126       struct bout_data_struct *bout_data;
3127       struct sun_core_struct *sun_core_data;
3128       struct sco5_core_struct *sco5_core_data;
3129       struct trad_core_struct *trad_core_data;
3130       struct som_data_struct *som_data;
3131       struct hpux_core_struct *hpux_core_data;
3132       struct hppabsd_core_struct *hppabsd_core_data;
3133       struct sgi_core_struct *sgi_core_data;
3134       struct lynx_core_struct *lynx_core_data;
3135       struct osf_core_struct *osf_core_data;
3136       struct cisco_core_struct *cisco_core_data;
3137       struct versados_data_struct *versados_data;
3138       struct netbsd_core_struct *netbsd_core_data;
3139       PTR any;
3140       } tdata;
3141
3142     /* Used by the application to hold private data*/
3143     PTR usrdata;
3144
3145   /* Where all the allocated stuff under this BFD goes.  This is a
3146      struct objalloc *, but we use PTR to avoid requiring the inclusion of
3147      objalloc.h.  */
3148     PTR memory;
3149 };
3150
3151 typedef enum bfd_error
3152 {
3153   bfd_error_no_error = 0,
3154   bfd_error_system_call,
3155   bfd_error_invalid_target,
3156   bfd_error_wrong_format,
3157   bfd_error_wrong_object_format,
3158   bfd_error_invalid_operation,
3159   bfd_error_no_memory,
3160   bfd_error_no_symbols,
3161   bfd_error_no_armap,
3162   bfd_error_no_more_archived_files,
3163   bfd_error_malformed_archive,
3164   bfd_error_file_not_recognized,
3165   bfd_error_file_ambiguously_recognized,
3166   bfd_error_no_contents,
3167   bfd_error_nonrepresentable_section,
3168   bfd_error_no_debug_section,
3169   bfd_error_bad_value,
3170   bfd_error_file_truncated,
3171   bfd_error_file_too_big,
3172   bfd_error_invalid_error_code
3173 } bfd_error_type;
3174
3175 bfd_error_type
3176 bfd_get_error PARAMS ((void));
3177
3178 void
3179 bfd_set_error PARAMS ((bfd_error_type error_tag));
3180
3181 const char *
3182 bfd_errmsg PARAMS ((bfd_error_type error_tag));
3183
3184 void
3185 bfd_perror PARAMS ((const char *message));
3186
3187 typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
3188
3189 bfd_error_handler_type
3190 bfd_set_error_handler PARAMS ((bfd_error_handler_type));
3191
3192 void
3193 bfd_set_error_program_name PARAMS ((const char *));
3194
3195 bfd_error_handler_type
3196 bfd_get_error_handler PARAMS ((void));
3197
3198 long
3199 bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
3200
3201 long
3202 bfd_canonicalize_reloc PARAMS ((bfd *abfd,
3203     asection *sec,
3204     arelent **loc,
3205     asymbol **syms));
3206
3207 void
3208 bfd_set_reloc PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
3209
3210     );
3211
3212 boolean
3213 bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
3214
3215 int
3216 bfd_get_arch_size PARAMS ((bfd *abfd));
3217
3218 int
3219 bfd_get_sign_extend_vma PARAMS ((bfd *abfd));
3220
3221 boolean
3222 bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma));
3223
3224 long
3225 bfd_get_mtime PARAMS ((bfd *abfd));
3226
3227 long
3228 bfd_get_size PARAMS ((bfd *abfd));
3229
3230 unsigned int
3231 bfd_get_gp_size PARAMS ((bfd *abfd));
3232
3233 void
3234 bfd_set_gp_size PARAMS ((bfd *abfd, unsigned int i));
3235
3236 bfd_vma
3237 bfd_scan_vma PARAMS ((const char *string, const char **end, int base));
3238
3239 boolean
3240 bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
3241
3242 #define bfd_copy_private_bfd_data(ibfd, obfd) \
3243      BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
3244                (ibfd, obfd))
3245 boolean
3246 bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
3247
3248 #define bfd_merge_private_bfd_data(ibfd, obfd) \
3249      BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
3250                (ibfd, obfd))
3251 boolean
3252 bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags));
3253
3254 #define bfd_set_private_flags(abfd, flags) \
3255      BFD_SEND (abfd, _bfd_set_private_flags, \
3256                (abfd, flags))
3257 #define bfd_sizeof_headers(abfd, reloc) \
3258      BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
3259
3260 #define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
3261      BFD_SEND (abfd, _bfd_find_nearest_line,  (abfd, sec, syms, off, file, func, line))
3262
3263        /* Do these three do anything useful at all, for any back end?  */
3264 #define bfd_debug_info_start(abfd) \
3265         BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
3266
3267 #define bfd_debug_info_end(abfd) \
3268         BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
3269
3270 #define bfd_debug_info_accumulate(abfd, section) \
3271         BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
3272
3273
3274 #define bfd_stat_arch_elt(abfd, stat) \
3275         BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
3276
3277 #define bfd_update_armap_timestamp(abfd) \
3278         BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
3279
3280 #define bfd_set_arch_mach(abfd, arch, mach)\
3281         BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
3282
3283 #define bfd_relax_section(abfd, section, link_info, again) \
3284        BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
3285
3286 #define bfd_gc_sections(abfd, link_info) \
3287        BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
3288
3289 #define bfd_merge_sections(abfd, link_info) \
3290        BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
3291
3292 #define bfd_link_hash_table_create(abfd) \
3293        BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
3294
3295 #define bfd_link_add_symbols(abfd, info) \
3296        BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
3297
3298 #define bfd_final_link(abfd, info) \
3299        BFD_SEND (abfd, _bfd_final_link, (abfd, info))
3300
3301 #define bfd_free_cached_info(abfd) \
3302        BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
3303
3304 #define bfd_get_dynamic_symtab_upper_bound(abfd) \
3305        BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
3306
3307 #define bfd_print_private_bfd_data(abfd, file)\
3308        BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
3309
3310 #define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
3311        BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
3312
3313 #define bfd_get_dynamic_reloc_upper_bound(abfd) \
3314        BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
3315
3316 #define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
3317        BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
3318
3319 extern bfd_byte *bfd_get_relocated_section_contents
3320        PARAMS ((bfd *, struct bfd_link_info *,
3321                  struct bfd_link_order *, bfd_byte *,
3322                  boolean, asymbol **));
3323
3324 boolean
3325 bfd_alt_mach_code PARAMS ((bfd *abfd, int index));
3326
3327 symindex
3328 bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
3329
3330 boolean
3331 bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head));
3332
3333 bfd *
3334 bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous));
3335
3336 CONST char *
3337 bfd_core_file_failing_command PARAMS ((bfd *abfd));
3338
3339 int
3340 bfd_core_file_failing_signal PARAMS ((bfd *abfd));
3341
3342 boolean
3343 core_file_matches_executable_p PARAMS ((bfd *core_bfd, bfd *exec_bfd));
3344
3345 #define BFD_SEND(bfd, message, arglist) \
3346                ((*((bfd)->xvec->message)) arglist)
3347
3348 #ifdef DEBUG_BFD_SEND
3349 #undef BFD_SEND
3350 #define BFD_SEND(bfd, message, arglist) \
3351   (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
3352     ((*((bfd)->xvec->message)) arglist) : \
3353     (bfd_assert (__FILE__,__LINE__), NULL))
3354 #endif
3355 #define BFD_SEND_FMT(bfd, message, arglist) \
3356             (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist)
3357
3358 #ifdef DEBUG_BFD_SEND
3359 #undef BFD_SEND_FMT
3360 #define BFD_SEND_FMT(bfd, message, arglist) \
3361   (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
3362    (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist) : \
3363    (bfd_assert (__FILE__,__LINE__), NULL))
3364 #endif
3365 enum bfd_flavour {
3366   bfd_target_unknown_flavour,
3367   bfd_target_aout_flavour,
3368   bfd_target_coff_flavour,
3369   bfd_target_ecoff_flavour,
3370   bfd_target_xcoff_flavour,
3371   bfd_target_elf_flavour,
3372   bfd_target_ieee_flavour,
3373   bfd_target_nlm_flavour,
3374   bfd_target_oasys_flavour,
3375   bfd_target_tekhex_flavour,
3376   bfd_target_srec_flavour,
3377   bfd_target_ihex_flavour,
3378   bfd_target_som_flavour,
3379   bfd_target_os9k_flavour,
3380   bfd_target_versados_flavour,
3381   bfd_target_msdos_flavour,
3382   bfd_target_ovax_flavour,
3383   bfd_target_evax_flavour
3384 };
3385
3386 enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN };
3387
3388 /* Forward declaration.  */
3389 typedef struct bfd_link_info _bfd_link_info;
3390
3391 typedef struct bfd_target
3392 {
3393   char *name;
3394   enum bfd_flavour flavour;
3395   enum bfd_endian byteorder;
3396   enum bfd_endian header_byteorder;
3397   flagword object_flags;
3398   flagword section_flags;
3399   char symbol_leading_char;
3400   char ar_pad_char;
3401   unsigned short ar_max_namelen;
3402   bfd_vma      (*bfd_getx64) PARAMS ((const bfd_byte *));
3403   bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
3404   void         (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
3405   bfd_vma      (*bfd_getx32) PARAMS ((const bfd_byte *));
3406   bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *));
3407   void         (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
3408   bfd_vma      (*bfd_getx16) PARAMS ((const bfd_byte *));
3409   bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *));
3410   void         (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
3411   bfd_vma      (*bfd_h_getx64) PARAMS ((const bfd_byte *));
3412   bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *));
3413   void         (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
3414   bfd_vma      (*bfd_h_getx32) PARAMS ((const bfd_byte *));
3415   bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *));
3416   void         (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
3417   bfd_vma      (*bfd_h_getx16) PARAMS ((const bfd_byte *));
3418   bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
3419   void         (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
3420   const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
3421   boolean             (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
3422   boolean             (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
3423
3424   /* Generic entry points.  */
3425 #define BFD_JUMP_TABLE_GENERIC(NAME)\
3426 CAT(NAME,_close_and_cleanup),\
3427 CAT(NAME,_bfd_free_cached_info),\
3428 CAT(NAME,_new_section_hook),\
3429 CAT(NAME,_get_section_contents),\
3430 CAT(NAME,_get_section_contents_in_window)
3431
3432   /* Called when the BFD is being closed to do any necessary cleanup.  */
3433   boolean       (*_close_and_cleanup) PARAMS ((bfd *));
3434   /* Ask the BFD to free all cached information.  */
3435   boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
3436   /* Called when a new section is created.  */
3437   boolean       (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
3438   /* Read the contents of a section.  */
3439   boolean       (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
3440                                             file_ptr, bfd_size_type));
3441   boolean       (*_bfd_get_section_contents_in_window)
3442                           PARAMS ((bfd *, sec_ptr, bfd_window *,
3443                                    file_ptr, bfd_size_type));
3444
3445   /* Entry points to copy private data.  */
3446 #define BFD_JUMP_TABLE_COPY(NAME)\
3447 CAT(NAME,_bfd_copy_private_bfd_data),\
3448 CAT(NAME,_bfd_merge_private_bfd_data),\
3449 CAT(NAME,_bfd_copy_private_section_data),\
3450 CAT(NAME,_bfd_copy_private_symbol_data),\
3451 CAT(NAME,_bfd_set_private_flags),\
3452 CAT(NAME,_bfd_print_private_bfd_data)\
3453   /* Called to copy BFD general private data from one object file
3454      to another.  */
3455   boolean       (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
3456   /* Called to merge BFD general private data from one object file
3457      to a common output file when linking.  */
3458   boolean       (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
3459   /* Called to copy BFD private section data from one object file
3460      to another.  */
3461   boolean       (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
3462                                                        bfd *, sec_ptr));
3463   /* Called to copy BFD private symbol data from one symbol
3464      to another.  */
3465   boolean       (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *,
3466                                                           bfd *, asymbol *));
3467   /* Called to set private backend flags */
3468   boolean       (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
3469
3470   /* Called to print private BFD data */
3471   boolean       (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR));
3472
3473   /* Core file entry points.  */
3474 #define BFD_JUMP_TABLE_CORE(NAME)\
3475 CAT(NAME,_core_file_failing_command),\
3476 CAT(NAME,_core_file_failing_signal),\
3477 CAT(NAME,_core_file_matches_executable_p)
3478   char *   (*_core_file_failing_command) PARAMS ((bfd *));
3479   int      (*_core_file_failing_signal) PARAMS ((bfd *));
3480   boolean  (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
3481
3482   /* Archive entry points.  */
3483 #define BFD_JUMP_TABLE_ARCHIVE(NAME)\
3484 CAT(NAME,_slurp_armap),\
3485 CAT(NAME,_slurp_extended_name_table),\
3486 CAT(NAME,_construct_extended_name_table),\
3487 CAT(NAME,_truncate_arname),\
3488 CAT(NAME,_write_armap),\
3489 CAT(NAME,_read_ar_hdr),\
3490 CAT(NAME,_openr_next_archived_file),\
3491 CAT(NAME,_get_elt_at_index),\
3492 CAT(NAME,_generic_stat_arch_elt),\
3493 CAT(NAME,_update_armap_timestamp)
3494   boolean  (*_bfd_slurp_armap) PARAMS ((bfd *));
3495   boolean  (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
3496   boolean  (*_bfd_construct_extended_name_table)
3497              PARAMS ((bfd *, char **, bfd_size_type *, const char **));
3498   void     (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
3499   boolean  (*write_armap) PARAMS ((bfd *arch,
3500                               unsigned int elength,
3501                               struct orl *map,
3502                               unsigned int orl_count,
3503                               int stridx));
3504   PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *));
3505   bfd *    (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
3506 #define bfd_get_elt_at_index(b,i) BFD_SEND(b, _bfd_get_elt_at_index, (b,i))
3507   bfd *    (*_bfd_get_elt_at_index) PARAMS ((bfd *, symindex));
3508   int      (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
3509   boolean  (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
3510
3511   /* Entry points used for symbols.  */
3512 #define BFD_JUMP_TABLE_SYMBOLS(NAME)\
3513 CAT(NAME,_get_symtab_upper_bound),\
3514 CAT(NAME,_get_symtab),\
3515 CAT(NAME,_make_empty_symbol),\
3516 CAT(NAME,_print_symbol),\
3517 CAT(NAME,_get_symbol_info),\
3518 CAT(NAME,_bfd_is_local_label_name),\
3519 CAT(NAME,_get_lineno),\
3520 CAT(NAME,_find_nearest_line),\
3521 CAT(NAME,_bfd_make_debug_symbol),\
3522 CAT(NAME,_read_minisymbols),\
3523 CAT(NAME,_minisymbol_to_symbol)
3524   long  (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *));
3525   long  (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
3526                                              struct symbol_cache_entry **));
3527   struct symbol_cache_entry  *
3528                 (*_bfd_make_empty_symbol) PARAMS ((bfd *));
3529   void          (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
3530                                       struct symbol_cache_entry *,
3531                                       bfd_print_symbol_type));
3532 #define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
3533   void          (*_bfd_get_symbol_info) PARAMS ((bfd *,
3534                                       struct symbol_cache_entry *,
3535                                       symbol_info *));
3536 #define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
3537   boolean       (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
3538
3539   alent *    (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
3540   boolean    (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
3541                     struct sec *section, struct symbol_cache_entry **symbols,
3542                     bfd_vma offset, CONST char **file, CONST char **func,
3543                     unsigned int *line));
3544  /* Back-door to allow format-aware applications to create debug symbols
3545     while using BFD for everything else.  Currently used by the assembler
3546     when creating COFF files.  */
3547   asymbol *  (*_bfd_make_debug_symbol) PARAMS ((
3548        bfd *abfd,
3549        void *ptr,
3550        unsigned long size));
3551 #define bfd_read_minisymbols(b, d, m, s) \
3552   BFD_SEND (b, _read_minisymbols, (b, d, m, s))
3553   long  (*_read_minisymbols) PARAMS ((bfd *, boolean, PTR *,
3554                                       unsigned int *));
3555 #define bfd_minisymbol_to_symbol(b, d, m, f) \
3556   BFD_SEND (b, _minisymbol_to_symbol, (b, d, m, f))
3557   asymbol *(*_minisymbol_to_symbol) PARAMS ((bfd *, boolean, const PTR,
3558                                              asymbol *));
3559
3560   /* Routines for relocs.  */
3561 #define BFD_JUMP_TABLE_RELOCS(NAME)\
3562 CAT(NAME,_get_reloc_upper_bound),\
3563 CAT(NAME,_canonicalize_reloc),\
3564 CAT(NAME,_bfd_reloc_type_lookup)
3565   long  (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
3566   long  (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
3567                                             struct symbol_cache_entry **));
3568   /* See documentation on reloc types.  */
3569   reloc_howto_type *
3570        (*reloc_type_lookup) PARAMS ((bfd *abfd,
3571                                      bfd_reloc_code_real_type code));
3572
3573   /* Routines used when writing an object file.  */
3574 #define BFD_JUMP_TABLE_WRITE(NAME)\
3575 CAT(NAME,_set_arch_mach),\
3576 CAT(NAME,_set_section_contents)
3577   boolean    (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
3578                     unsigned long));
3579   boolean       (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
3580                                             file_ptr, bfd_size_type));
3581
3582   /* Routines used by the linker.  */
3583 #define BFD_JUMP_TABLE_LINK(NAME)\
3584 CAT(NAME,_sizeof_headers),\
3585 CAT(NAME,_bfd_get_relocated_section_contents),\
3586 CAT(NAME,_bfd_relax_section),\
3587 CAT(NAME,_bfd_link_hash_table_create),\
3588 CAT(NAME,_bfd_link_add_symbols),\
3589 CAT(NAME,_bfd_final_link),\
3590 CAT(NAME,_bfd_link_split_section),\
3591 CAT(NAME,_bfd_gc_sections),\
3592 CAT(NAME,_bfd_merge_sections)
3593   int        (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
3594   bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
3595                     struct bfd_link_info *, struct bfd_link_order *,
3596                     bfd_byte *data, boolean relocateable,
3597                     struct symbol_cache_entry **));
3598
3599   boolean    (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
3600                     struct bfd_link_info *, boolean *again));
3601
3602   /* Create a hash table for the linker.  Different backends store
3603      different information in this table.  */
3604   struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
3605
3606   /* Add symbols from this object file into the hash table.  */
3607   boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
3608
3609   /* Do a link based on the link_order structures attached to each
3610      section of the BFD.  */
3611   boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
3612
3613   /* Should this section be split up into smaller pieces during linking.  */
3614   boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *));
3615
3616   /* Remove sections that are not referenced from the output.  */
3617   boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *));
3618
3619   /* Attempt to merge SEC_MERGE sections.  */
3620   boolean (*_bfd_merge_sections) PARAMS ((bfd *, struct bfd_link_info *));
3621
3622   /* Routines to handle dynamic symbols and relocs.  */
3623 #define BFD_JUMP_TABLE_DYNAMIC(NAME)\
3624 CAT(NAME,_get_dynamic_symtab_upper_bound),\
3625 CAT(NAME,_canonicalize_dynamic_symtab),\
3626 CAT(NAME,_get_dynamic_reloc_upper_bound),\
3627 CAT(NAME,_canonicalize_dynamic_reloc)
3628   /* Get the amount of memory required to hold the dynamic symbols. */
3629   long  (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
3630   /* Read in the dynamic symbols.  */
3631   long  (*_bfd_canonicalize_dynamic_symtab)
3632     PARAMS ((bfd *, struct symbol_cache_entry **));
3633   /* Get the amount of memory required to hold the dynamic relocs.  */
3634   long  (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
3635   /* Read in the dynamic relocs.  */
3636   long  (*_bfd_canonicalize_dynamic_reloc)
3637     PARAMS ((bfd *, arelent **, struct symbol_cache_entry **));
3638
3639  /* Opposite endian version of this target.  */
3640  const struct bfd_target * alternative_target;
3641
3642  PTR backend_data;
3643
3644 } bfd_target;
3645 boolean
3646 bfd_set_default_target PARAMS ((const char *name));
3647
3648 const bfd_target *
3649 bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
3650
3651 const char **
3652 bfd_target_list PARAMS ((void));
3653
3654 const bfd_target *
3655 bfd_search_for_target PARAMS ((int (* search_func) (const bfd_target *, void *), void *));
3656
3657 boolean
3658 bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
3659
3660 boolean
3661 bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching));
3662
3663 boolean
3664 bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
3665
3666 const char *
3667 bfd_format_string PARAMS ((bfd_format format));
3668
3669 #ifdef __cplusplus
3670 }
3671 #endif
3672 #endif