1 # This file is a shell script that supplies the information necessary
2 # to tailor a template configure script into the configure script
3 # appropriate for this directory. For more information, check any
4 # existing configure script.
16 . ${srcdir}/configure.host
18 # Set up to make a link between the host's include file and "sysdep.h".
19 files="hosts/${my_host}.h"
22 if [ ! -f ${srcdir}/${files} ] ; then
23 files=../bfd/hosts/std-host.h
24 echo "[${srcname} has no specific support for host ${host} -- using std-host]"
28 if [ -f ${srcdir}/config/${my_host}.mh ] ; then
29 host_makefile_frag=config/${my_host}.mh
34 # WHEN ADDING ENTRIES TO THIS MATRIX:
35 # Make sure that the left side always has two dashes. Otherwise you
36 # can get spurious matches. Even for unambiguous cases, do this as a
37 # convention, else the table becomes a real mess to understand and maintain.
40 alpha-*-*) bfd_target=alphaosf ;;
41 a29k-*-ebmon) bfd_target=a29k-coff ;;
42 a29k-*-udi) bfd_target=a29k-coff ;;
43 a29k-*-aout) bfd_target=a29k-aout ;;
44 a29k-*-coff) bfd_target=a29k-coff ;;
45 a29k-*-sym1) bfd_target=a29k-coff ;;
46 h8300-*-*) bfd_target=h8300-coff ;;
47 h8500-*-*) bfd_target=h8500-coff ;;
48 sh-*-*) bfd_target=sh-coff ;;
49 hppa*-*-bsd*) bfd_target=hppabsd ;;
50 hppa*-*-hpux*) bfd_target=hppahpux ;;
51 hppa*-*-osf) bfd_target=hppa-elf ;;
52 i[34]86-*-sysv4*) bfd_target=i386-elf ;;
53 i[34]86-*-sysv*) bfd_target=i386-coff ;;
54 i[34]86-*-isc*) bfd_target=i386-sco ;; # gets core dump reading right
55 i[34]86-*-sco*) bfd_target=i386-sco ;;
56 i[34]86-*-bsd*) bfd_target=i386-bsd ;;
57 i[34]86-*-aix*) bfd_target=i386-coff ;;
58 i[34]86-*-elf) bfd_target=i386-elf ;;
59 i[34]86-*-linux*) bfd_target=i386-linux ;;
60 i[34]86-none-*) bfd_target=i386-coff ;;
61 i960-*-vxworks) bfd_target=i960-bout ;;
62 i960-*-aout) bfd_target=i960-bout ;;
63 i960-*-bout) bfd_target=i960-bout ;;
64 m68*-hp-bsd*) bfd_target=hp300bsd ;;
65 m68*-*-aout) bfd_target=m68k-aout ;;
66 m68*-*-coff) bfd_target=m68k-coff ;;
67 m68*-*-hpux*) bfd_target=hp300hpux ;;
68 m68*-*-os68k) bfd_target=m68k-aout ;;
69 m68*-*-sunos*) bfd_target=m68k-aout ;;
70 m68*-*-sysv*) bfd_target=m68k-coff ;;
71 m68*-*-vxworks*) bfd_target=m68k-aout ;;
72 m68*-ericsson-*) bfd_target=m68k-aout ;;
73 m68*-netx-*) bfd_target=m68k-aout ;;
74 m88k-*-*) bfd_target=m88k-coff ;;
75 mips-big-*) bfd_target=bigmips ;;
76 mips-dec-bsd*) bfd_target=mipsdecbsd ;;
77 mips-dec-*) bfd_target=decstation ;;
78 mips-*-ecoffl*) bfd_target=decstation ;;
79 mips-*-ecoff*) bfd_target=bigmips ;;
80 mips-sgi-*) bfd_target=bigmips ;;
81 mips-*-sysv*) bfd_target=riscos ;;
82 rs6000-*-*) bfd_target=rs6000 ;;
83 sparc-*-solaris2*) bfd_target=sparc-elf ;;
84 sparc-*-sysv4*) bfd_target=sparc-elf ;;
85 sparc64-*-aout*) bfd_target=sparc-aout ; target64=true ;; # v9
86 sparc64-*-elf*) bfd_target=sparc-aout ; target64=true ;; # v9
87 sparc*-*-*) bfd_target=sparc-aout ;;
88 tahoe-*-*) bfd_target=tahoe ;;
89 vax-*-vms) bfd_target=vax-vms ;;
90 vax-*-*) bfd_target=vax ;;
91 we32k-*-*) bfd_target=we32k ;;
92 z8k*-*-*) bfd_target=z8k-coff ;;
94 *-*-aout) bfd_target=${target_cpu}-aout ;;
95 *-*-bsd*) bfd_target=${target_cpu}-aout ;;
96 *-*-sysv4*) bfd_target=${target_cpu}-elf ;;
97 *-*-solaris2*) bfd_target=${target_cpu}-elf ;;
98 *-*-go32) bfd_target=${target_cpu}-aout ;;
99 *-*-sysv*) bfd_target=${target_cpu}-coff ;;
101 *-*-aout64) bfd_target=${target_cpu}-aout64 ; target64=true ;;
102 *-*-elf64) bfd_target=${target_cpu}-elf64 ; target64=true ;;
104 *-adobe-*) bfd_target=adobe ;;
105 *-sony-*) bfd_target=news ;;
106 *-intel-*) bfd_target=${target_cpu}-coff ;;
107 *-stratus-*) bfd_target=${target_cpu}-elf ;;
108 *-cbm-*) bfd_target=${target_cpu}-elf ;;
109 *-ncr-*) bfd_target=${target_cpu}-elf ;;
110 *-tandem-*) bfd_target=st2000 ;;
113 if [ ! -f ${srcdir}/config/${bfd_target}.mt ] ; then
114 if [ -n "${bfd_target}" ] ; then
115 echo '***' No file ${srcdir}/config/${bfd_target}.mt 1>&2
117 echo '***' BFD does not support target ${target} 1>&2
118 echo '***' Look in bfd/configure.in for supported targets 1>&2
121 target_makefile_frag=config/${bfd_target}.mt
123 # We don't do any links based on the target system, just very minor makefile
128 rm -f Makefile.tmp Makefile.2
129 mv Makefile Makefile.tmp
131 case ${with_minimal_bfd} in
133 echo MINIMIZE=1 > Makefile.2
136 echo MINIMIZE=0 > Makefile.2
139 echo "*** bad value \"${with_minimal_bfd}\" for minimal-bfd flag; ignored" 1>&2
140 echo MINIMIZE=0 > Makefile.2
144 case ${with_64_bit_bfd} in
152 echo "*** bad value \"${with_64_bit_bfd}\" for 64-bit-bfd flag; ignored" 1>&2
156 case ${host64}-${target64}-${want64} in
158 echo WORDSIZE=64 >> Makefile.2
159 echo 'BFD_BACKENDS = $(BFD32_BACKENDS) $(BFD64_BACKENDS)' >> Makefile.2
162 echo WORDSIZE=32 >> Makefile.2
163 echo 'BFD_BACKENDS = $(BFD32_BACKENDS)' >> Makefile.2
167 cat Makefile.tmp >> Makefile.2
169 mv Makefile.2 Makefile