bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2016 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589   if (bfd_is_abs_section (symbol->section)
 590       && output_bfd != NULL)
 591     {
 592       reloc_entry->address += input_section->output_offset;
 593       return bfd_reloc_ok;
 594     }
 595
 596   /* PR 17512: file: 0f67f69d.  */
 597   if (howto == NULL)
 598     return bfd_reloc_undefined;
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?
 622      Include the size of the reloc in the test for out of range addresses.
 623      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 624   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 625   if (octets + bfd_get_reloc_size (howto)
 626       > bfd_get_section_limit_octets (abfd, input_section))
 627     return bfd_reloc_outofrange;
 628
 629   /* Work out which section the relocation is targeted at and the
 630      initial relocation command value.  */
 631
 632   /* Get symbol value.  (Common symbols are special.)  */
 633   if (bfd_is_com_section (symbol->section))
 634     relocation = 0;
 635   else
 636     relocation = symbol->value;
 637
 638   reloc_target_output_section = symbol->section->output_section;
 639
 640   /* Convert input-section-relative symbol value to absolute.  */
 641   if ((output_bfd && ! howto->partial_inplace)
 642       || reloc_target_output_section == NULL)
 643     output_base = 0;
 644   else
 645     output_base = reloc_target_output_section->vma;
 646
 647   relocation += output_base + symbol->section->output_offset;
 648
 649   /* Add in supplied addend.  */
 650   relocation += reloc_entry->addend;
 651
 652   /* Here the variable relocation holds the final address of the
 653      symbol we are relocating against, plus any addend.  */
 654
 655   if (howto->pc_relative)
 656     {
 657       /* This is a PC relative relocation.  We want to set RELOCATION
 658          to the distance between the address of the symbol and the
 659          location.  RELOCATION is already the address of the symbol.
 660
 661          We start by subtracting the address of the section containing
 662          the location.
 663
 664          If pcrel_offset is set, we must further subtract the position
 665          of the location within the section.  Some targets arrange for
 666          the addend to be the negative of the position of the location
 667          within the section; for example, i386-aout does this.  For
 668          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 669          include the position of the location; for example, m88kbcs,
 670          or ELF.  For those targets, pcrel_offset is TRUE.
 671
 672          If we are producing relocatable output, then we must ensure
 673          that this reloc will be correctly computed when the final
 674          relocation is done.  If pcrel_offset is FALSE we want to wind
 675          up with the negative of the location within the section,
 676          which means we must adjust the existing addend by the change
 677          in the location within the section.  If pcrel_offset is TRUE
 678          we do not want to adjust the existing addend at all.
 679
 680          FIXME: This seems logical to me, but for the case of
 681          producing relocatable output it is not what the code
 682          actually does.  I don't want to change it, because it seems
 683          far too likely that something will break.  */
 684
 685       relocation -=
 686         input_section->output_section->vma + input_section->output_offset;
 687
 688       if (howto->pcrel_offset)
 689         relocation -= reloc_entry->address;
 690     }
 691
 692   if (output_bfd != NULL)
 693     {
 694       if (! howto->partial_inplace)
 695         {
 696           /* This is a partial relocation, and we want to apply the relocation
 697              to the reloc entry rather than the raw data. Modify the reloc
 698              inplace to reflect what we now know.  */
 699           reloc_entry->addend = relocation;
 700           reloc_entry->address += input_section->output_offset;
 701           return flag;
 702         }
 703       else
 704         {
 705           /* This is a partial relocation, but inplace, so modify the
 706              reloc record a bit.
 707
 708              If we've relocated with a symbol with a section, change
 709              into a ref to the section belonging to the symbol.  */
 710
 711           reloc_entry->address += input_section->output_offset;
 712
 713           /* WTF?? */
 714           if (abfd->xvec->flavour == bfd_target_coff_flavour
 715               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 716               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 717             {
 718               /* For m68k-coff, the addend was being subtracted twice during
 719                  relocation with -r.  Removing the line below this comment
 720                  fixes that problem; see PR 2953.
 721
 722 However, Ian wrote the following, regarding removing the line below,
 723 which explains why it is still enabled:  --djm
 724
 725 If you put a patch like that into BFD you need to check all the COFF
 726 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 727 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 728 problem in a different way.  There may very well be a reason that the
 729 code works as it does.
 730
 731 Hmmm.  The first obvious point is that bfd_perform_relocation should
 732 not have any tests that depend upon the flavour.  It's seem like
 733 entirely the wrong place for such a thing.  The second obvious point
 734 is that the current code ignores the reloc addend when producing
 735 relocatable output for COFF.  That's peculiar.  In fact, I really
 736 have no idea what the point of the line you want to remove is.
 737
 738 A typical COFF reloc subtracts the old value of the symbol and adds in
 739 the new value to the location in the object file (if it's a pc
 740 relative reloc it adds the difference between the symbol value and the
 741 location).  When relocating we need to preserve that property.
 742
 743 BFD handles this by setting the addend to the negative of the old
 744 value of the symbol.  Unfortunately it handles common symbols in a
 745 non-standard way (it doesn't subtract the old value) but that's a
 746 different story (we can't change it without losing backward
 747 compatibility with old object files) (coff-i386 does subtract the old
 748 value, to be compatible with existing coff-i386 targets, like SCO).
 749
 750 So everything works fine when not producing relocatable output.  When
 751 we are producing relocatable output, logically we should do exactly
 752 what we do when not producing relocatable output.  Therefore, your
 753 patch is correct.  In fact, it should probably always just set
 754 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 755 add the value into the object file.  This won't hurt the COFF code,
 756 which doesn't use the addend; I'm not sure what it will do to other
 757 formats (the thing to check for would be whether any formats both use
 758 the addend and set partial_inplace).
 759
 760 When I wanted to make coff-i386 produce relocatable output, I ran
 761 into the problem that you are running into: I wanted to remove that
 762 line.  Rather than risk it, I made the coff-i386 relocs use a special
 763 function; it's coff_i386_reloc in coff-i386.c.  The function
 764 specifically adds the addend field into the object file, knowing that
 765 bfd_perform_relocation is not going to.  If you remove that line, then
 766 coff-i386.c will wind up adding the addend field in twice.  It's
 767 trivial to fix; it just needs to be done.
 768
 769 The problem with removing the line is just that it may break some
 770 working code.  With BFD it's hard to be sure of anything.  The right
 771 way to deal with this is simply to build and test at least all the
 772 supported COFF targets.  It should be straightforward if time and disk
 773 space consuming.  For each target:
 774     1) build the linker
 775     2) generate some executable, and link it using -r (I would
 776        probably use paranoia.o and link against newlib/libc.a, which
 777        for all the supported targets would be available in
 778        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 779     3) make the change to reloc.c
 780     4) rebuild the linker
 781     5) repeat step 2
 782     6) if the resulting object files are the same, you have at least
 783        made it no worse
 784     7) if they are different you have to figure out which version is
 785        right
 786 */
 787               relocation -= reloc_entry->addend;
 788               reloc_entry->addend = 0;
 789             }
 790           else
 791             {
 792               reloc_entry->addend = relocation;
 793             }
 794         }
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets;
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1010   if (octets + bfd_get_reloc_size (howto)
1011       > bfd_get_section_limit_octets (abfd, input_section))
1012     return bfd_reloc_outofrange;
1013
1014   /* Work out which section the relocation is targeted at and the
1015      initial relocation command value.  */
1016
1017   /* Get symbol value.  (Common symbols are special.)  */
1018   if (bfd_is_com_section (symbol->section))
1019     relocation = 0;
1020   else
1021     relocation = symbol->value;
1022
1023   reloc_target_output_section = symbol->section->output_section;
1024
1025   /* Convert input-section-relative symbol value to absolute.  */
1026   if (! howto->partial_inplace)
1027     output_base = 0;
1028   else
1029     output_base = reloc_target_output_section->vma;
1030
1031   relocation += output_base + symbol->section->output_offset;
1032
1033   /* Add in supplied addend.  */
1034   relocation += reloc_entry->addend;
1035
1036   /* Here the variable relocation holds the final address of the
1037      symbol we are relocating against, plus any addend.  */
1038
1039   if (howto->pc_relative)
1040     {
1041       /* This is a PC relative relocation.  We want to set RELOCATION
1042          to the distance between the address of the symbol and the
1043          location.  RELOCATION is already the address of the symbol.
1044
1045          We start by subtracting the address of the section containing
1046          the location.
1047
1048          If pcrel_offset is set, we must further subtract the position
1049          of the location within the section.  Some targets arrange for
1050          the addend to be the negative of the position of the location
1051          within the section; for example, i386-aout does this.  For
1052          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1053          include the position of the location; for example, m88kbcs,
1054          or ELF.  For those targets, pcrel_offset is TRUE.
1055
1056          If we are producing relocatable output, then we must ensure
1057          that this reloc will be correctly computed when the final
1058          relocation is done.  If pcrel_offset is FALSE we want to wind
1059          up with the negative of the location within the section,
1060          which means we must adjust the existing addend by the change
1061          in the location within the section.  If pcrel_offset is TRUE
1062          we do not want to adjust the existing addend at all.
1063
1064          FIXME: This seems logical to me, but for the case of
1065          producing relocatable output it is not what the code
1066          actually does.  I don't want to change it, because it seems
1067          far too likely that something will break.  */
1068
1069       relocation -=
1070         input_section->output_section->vma + input_section->output_offset;
1071
1072       if (howto->pcrel_offset && howto->partial_inplace)
1073         relocation -= reloc_entry->address;
1074     }
1075
1076   if (! howto->partial_inplace)
1077     {
1078       /* This is a partial relocation, and we want to apply the relocation
1079          to the reloc entry rather than the raw data. Modify the reloc
1080          inplace to reflect what we now know.  */
1081       reloc_entry->addend = relocation;
1082       reloc_entry->address += input_section->output_offset;
1083       return flag;
1084     }
1085   else
1086     {
1087       /* This is a partial relocation, but inplace, so modify the
1088          reloc record a bit.
1089
1090          If we've relocated with a symbol with a section, change
1091          into a ref to the section belonging to the symbol.  */
1092       reloc_entry->address += input_section->output_offset;
1093
1094       /* WTF?? */
1095       if (abfd->xvec->flavour == bfd_target_coff_flavour
1096           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1097           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1098         {
1099
1100           /* For m68k-coff, the addend was being subtracted twice during
1101              relocation with -r.  Removing the line below this comment
1102              fixes that problem; see PR 2953.
1103
1104 However, Ian wrote the following, regarding removing the line below,
1105 which explains why it is still enabled:  --djm
1106
1107 If you put a patch like that into BFD you need to check all the COFF
1108 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1109 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1110 problem in a different way.  There may very well be a reason that the
1111 code works as it does.
1112
1113 Hmmm.  The first obvious point is that bfd_install_relocation should
1114 not have any tests that depend upon the flavour.  It's seem like
1115 entirely the wrong place for such a thing.  The second obvious point
1116 is that the current code ignores the reloc addend when producing
1117 relocatable output for COFF.  That's peculiar.  In fact, I really
1118 have no idea what the point of the line you want to remove is.
1119
1120 A typical COFF reloc subtracts the old value of the symbol and adds in
1121 the new value to the location in the object file (if it's a pc
1122 relative reloc it adds the difference between the symbol value and the
1123 location).  When relocating we need to preserve that property.
1124
1125 BFD handles this by setting the addend to the negative of the old
1126 value of the symbol.  Unfortunately it handles common symbols in a
1127 non-standard way (it doesn't subtract the old value) but that's a
1128 different story (we can't change it without losing backward
1129 compatibility with old object files) (coff-i386 does subtract the old
1130 value, to be compatible with existing coff-i386 targets, like SCO).
1131
1132 So everything works fine when not producing relocatable output.  When
1133 we are producing relocatable output, logically we should do exactly
1134 what we do when not producing relocatable output.  Therefore, your
1135 patch is correct.  In fact, it should probably always just set
1136 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1137 add the value into the object file.  This won't hurt the COFF code,
1138 which doesn't use the addend; I'm not sure what it will do to other
1139 formats (the thing to check for would be whether any formats both use
1140 the addend and set partial_inplace).
1141
1142 When I wanted to make coff-i386 produce relocatable output, I ran
1143 into the problem that you are running into: I wanted to remove that
1144 line.  Rather than risk it, I made the coff-i386 relocs use a special
1145 function; it's coff_i386_reloc in coff-i386.c.  The function
1146 specifically adds the addend field into the object file, knowing that
1147 bfd_install_relocation is not going to.  If you remove that line, then
1148 coff-i386.c will wind up adding the addend field in twice.  It's
1149 trivial to fix; it just needs to be done.
1150
1151 The problem with removing the line is just that it may break some
1152 working code.  With BFD it's hard to be sure of anything.  The right
1153 way to deal with this is simply to build and test at least all the
1154 supported COFF targets.  It should be straightforward if time and disk
1155 space consuming.  For each target:
1156     1) build the linker
1157     2) generate some executable, and link it using -r (I would
1158        probably use paranoia.o and link against newlib/libc.a, which
1159        for all the supported targets would be available in
1160        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1161     3) make the change to reloc.c
1162     4) rebuild the linker
1163     5) repeat step 2
1164     6) if the resulting object files are the same, you have at least
1165        made it no worse
1166     7) if they are different you have to figure out which version is
1167        right.  */
1168           relocation -= reloc_entry->addend;
1169           /* FIXME: There should be no target specific code here...  */
1170           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1171             reloc_entry->addend = 0;
1172         }
1173       else
1174         {
1175           reloc_entry->addend = relocation;
1176         }
1177     }
1178
1179   /* FIXME: This overflow checking is incomplete, because the value
1180      might have overflowed before we get here.  For a correct check we
1181      need to compute the value in a size larger than bitsize, but we
1182      can't reasonably do that for a reloc the same size as a host
1183      machine word.
1184      FIXME: We should also do overflow checking on the result after
1185      adding in the value contained in the object file.  */
1186   if (howto->complain_on_overflow != complain_overflow_dont)
1187     flag = bfd_check_overflow (howto->complain_on_overflow,
1188                                howto->bitsize,
1189                                howto->rightshift,
1190                                bfd_arch_bits_per_address (abfd),
1191                                relocation);
1192
1193   /* Either we are relocating all the way, or we don't want to apply
1194      the relocation to the reloc entry (probably because there isn't
1195      any room in the output format to describe addends to relocs).  */
1196
1197   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1198      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1199      following program:
1200
1201      struct str
1202      {
1203        unsigned int i0;
1204      } s = { 0 };
1205
1206      int
1207      main ()
1208      {
1209        unsigned long x;
1210
1211        x = 0x100000000;
1212        x <<= (unsigned long) s.i0;
1213        if (x == 0)
1214          printf ("failed\n");
1215        else
1216          printf ("succeeded (%lx)\n", x);
1217      }
1218      */
1219
1220   relocation >>= (bfd_vma) howto->rightshift;
1221
1222   /* Shift everything up to where it's going to be used.  */
1223   relocation <<= (bfd_vma) howto->bitpos;
1224
1225   /* Wait for the day when all have the mask in them.  */
1226
1227   /* What we do:
1228      i instruction to be left alone
1229      o offset within instruction
1230      r relocation offset to apply
1231      S src mask
1232      D dst mask
1233      N ~dst mask
1234      A part 1
1235      B part 2
1236      R result
1237
1238      Do this:
1239      ((  i i i i i o o o o o  from bfd_get<size>
1240      and           S S S S S) to get the size offset we want
1241      +   r r r r r r r r r r) to get the final value to place
1242      and           D D D D D  to chop to right size
1243      -----------------------
1244      =             A A A A A
1245      And this:
1246      (   i i i i i o o o o o  from bfd_get<size>
1247      and N N N N N          ) get instruction
1248      -----------------------
1249      =   B B B B B
1250
1251      And then:
1252      (   B B B B B
1253      or            A A A A A)
1254      -----------------------
1255      =   R R R R R R R R R R  put into bfd_put<size>
1256      */
1257
1258 #define DOIT(x) \
1259   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1260
1261   data = (bfd_byte *) data_start + (octets - data_start_offset);
1262
1263   switch (howto->size)
1264     {
1265     case 0:
1266       {
1267         char x = bfd_get_8 (abfd, data);
1268         DOIT (x);
1269         bfd_put_8 (abfd, x, data);
1270       }
1271       break;
1272
1273     case 1:
1274       {
1275         short x = bfd_get_16 (abfd, data);
1276         DOIT (x);
1277         bfd_put_16 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case 2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         DOIT (x);
1284         bfd_put_32 (abfd, (bfd_vma) x, data);
1285       }
1286       break;
1287     case -2:
1288       {
1289         long x = bfd_get_32 (abfd, data);
1290         relocation = -relocation;
1291         DOIT (x);
1292         bfd_put_32 (abfd, (bfd_vma) x, data);
1293       }
1294       break;
1295
1296     case 3:
1297       /* Do nothing */
1298       break;
1299
1300     case 4:
1301       {
1302         bfd_vma x = bfd_get_64 (abfd, data);
1303         DOIT (x);
1304         bfd_put_64 (abfd, x, data);
1305       }
1306       break;
1307     default:
1308       return bfd_reloc_other;
1309     }
1310
1311   return flag;
1312 }
1313
1314 /* This relocation routine is used by some of the backend linkers.
1315    They do not construct asymbol or arelent structures, so there is no
1316    reason for them to use bfd_perform_relocation.  Also,
1317    bfd_perform_relocation is so hacked up it is easier to write a new
1318    function than to try to deal with it.
1319
1320    This routine does a final relocation.  Whether it is useful for a
1321    relocatable link depends upon how the object format defines
1322    relocations.
1323
1324    FIXME: This routine ignores any special_function in the HOWTO,
1325    since the existing special_function values have been written for
1326    bfd_perform_relocation.
1327
1328    HOWTO is the reloc howto information.
1329    INPUT_BFD is the BFD which the reloc applies to.
1330    INPUT_SECTION is the section which the reloc applies to.
1331    CONTENTS is the contents of the section.
1332    ADDRESS is the address of the reloc within INPUT_SECTION.
1333    VALUE is the value of the symbol the reloc refers to.
1334    ADDEND is the addend of the reloc.  */
1335
1336 bfd_reloc_status_type
1337 _bfd_final_link_relocate (reloc_howto_type *howto,
1338                           bfd *input_bfd,
1339                           asection *input_section,
1340                           bfd_byte *contents,
1341                           bfd_vma address,
1342                           bfd_vma value,
1343                           bfd_vma addend)
1344 {
1345   bfd_vma relocation;
1346   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1347
1348   /* Sanity check the address.  */
1349   if (octets + bfd_get_reloc_size (howto)
1350       > bfd_get_section_limit_octets (input_bfd, input_section))
1351     return bfd_reloc_outofrange;
1352
1353   /* This function assumes that we are dealing with a basic relocation
1354      against a symbol.  We want to compute the value of the symbol to
1355      relocate to.  This is just VALUE, the value of the symbol, plus
1356      ADDEND, any addend associated with the reloc.  */
1357   relocation = value + addend;
1358
1359   /* If the relocation is PC relative, we want to set RELOCATION to
1360      the distance between the symbol (currently in RELOCATION) and the
1361      location we are relocating.  Some targets (e.g., i386-aout)
1362      arrange for the contents of the section to be the negative of the
1363      offset of the location within the section; for such targets
1364      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1365      simply leave the contents of the section as zero; for such
1366      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1367      need to subtract out the offset of the location within the
1368      section (which is just ADDRESS).  */
1369   if (howto->pc_relative)
1370     {
1371       relocation -= (input_section->output_section->vma
1372                      + input_section->output_offset);
1373       if (howto->pcrel_offset)
1374         relocation -= address;
1375     }
1376
1377   return _bfd_relocate_contents (howto, input_bfd, relocation,
1378                                  contents
1379                                  + address * bfd_octets_per_byte (input_bfd));
1380 }
1381
1382 /* Relocate a given location using a given value and howto.  */
1383
1384 bfd_reloc_status_type
1385 _bfd_relocate_contents (reloc_howto_type *howto,
1386                         bfd *input_bfd,
1387                         bfd_vma relocation,
1388                         bfd_byte *location)
1389 {
1390   int size;
1391   bfd_vma x = 0;
1392   bfd_reloc_status_type flag;
1393   unsigned int rightshift = howto->rightshift;
1394   unsigned int bitpos = howto->bitpos;
1395
1396   /* If the size is negative, negate RELOCATION.  This isn't very
1397      general.  */
1398   if (howto->size < 0)
1399     relocation = -relocation;
1400
1401   /* Get the value we are going to relocate.  */
1402   size = bfd_get_reloc_size (howto);
1403   switch (size)
1404     {
1405     default:
1406       abort ();
1407     case 0:
1408       return bfd_reloc_ok;
1409     case 1:
1410       x = bfd_get_8 (input_bfd, location);
1411       break;
1412     case 2:
1413       x = bfd_get_16 (input_bfd, location);
1414       break;
1415     case 4:
1416       x = bfd_get_32 (input_bfd, location);
1417       break;
1418     case 8:
1419 #ifdef BFD64
1420       x = bfd_get_64 (input_bfd, location);
1421 #else
1422       abort ();
1423 #endif
1424       break;
1425     }
1426
1427   /* Check for overflow.  FIXME: We may drop bits during the addition
1428      which we don't check for.  We must either check at every single
1429      operation, which would be tedious, or we must do the computations
1430      in a type larger than bfd_vma, which would be inefficient.  */
1431   flag = bfd_reloc_ok;
1432   if (howto->complain_on_overflow != complain_overflow_dont)
1433     {
1434       bfd_vma addrmask, fieldmask, signmask, ss;
1435       bfd_vma a, b, sum;
1436
1437       /* Get the values to be added together.  For signed and unsigned
1438          relocations, we assume that all values should be truncated to
1439          the size of an address.  For bitfields, all the bits matter.
1440          See also bfd_check_overflow.  */
1441       fieldmask = N_ONES (howto->bitsize);
1442       signmask = ~fieldmask;
1443       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1444                   | (fieldmask << rightshift));
1445       a = (relocation & addrmask) >> rightshift;
1446       b = (x & howto->src_mask & addrmask) >> bitpos;
1447       addrmask >>= rightshift;
1448
1449       switch (howto->complain_on_overflow)
1450         {
1451         case complain_overflow_signed:
1452           /* If any sign bits are set, all sign bits must be set.
1453              That is, A must be a valid negative address after
1454              shifting.  */
1455           signmask = ~(fieldmask >> 1);
1456           /* Fall thru */
1457
1458         case complain_overflow_bitfield:
1459           /* Much like the signed check, but for a field one bit
1460              wider.  We allow a bitfield to represent numbers in the
1461              range -2**n to 2**n-1, where n is the number of bits in the
1462              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1463              can't overflow, which is exactly what we want.  */
1464           ss = a & signmask;
1465           if (ss != 0 && ss != (addrmask & signmask))
1466             flag = bfd_reloc_overflow;
1467
1468           /* We only need this next bit of code if the sign bit of B
1469              is below the sign bit of A.  This would only happen if
1470              SRC_MASK had fewer bits than BITSIZE.  Note that if
1471              SRC_MASK has more bits than BITSIZE, we can get into
1472              trouble; we would need to verify that B is in range, as
1473              we do for A above.  */
1474           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1475           ss >>= bitpos;
1476
1477           /* Set all the bits above the sign bit.  */
1478           b = (b ^ ss) - ss;
1479
1480           /* Now we can do the addition.  */
1481           sum = a + b;
1482
1483           /* See if the result has the correct sign.  Bits above the
1484              sign bit are junk now; ignore them.  If the sum is
1485              positive, make sure we did not have all negative inputs;
1486              if the sum is negative, make sure we did not have all
1487              positive inputs.  The test below looks only at the sign
1488              bits, and it really just
1489                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1490
1491              We mask with addrmask here to explicitly allow an address
1492              wrap-around.  The Linux kernel relies on it, and it is
1493              the only way to write assembler code which can run when
1494              loaded at a location 0x80000000 away from the location at
1495              which it is linked.  */
1496           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1497             flag = bfd_reloc_overflow;
1498           break;
1499
1500         case complain_overflow_unsigned:
1501           /* Checking for an unsigned overflow is relatively easy:
1502              trim the addresses and add, and trim the result as well.
1503              Overflow is normally indicated when the result does not
1504              fit in the field.  However, we also need to consider the
1505              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1506              input is 0x80000000, and bfd_vma is only 32 bits; then we
1507              will get sum == 0, but there is an overflow, since the
1508              inputs did not fit in the field.  Instead of doing a
1509              separate test, we can check for this by or-ing in the
1510              operands when testing for the sum overflowing its final
1511              field.  */
1512           sum = (a + b) & addrmask;
1513           if ((a | b | sum) & signmask)
1514             flag = bfd_reloc_overflow;
1515           break;
1516
1517         default:
1518           abort ();
1519         }
1520     }
1521
1522   /* Put RELOCATION in the right bits.  */
1523   relocation >>= (bfd_vma) rightshift;
1524   relocation <<= (bfd_vma) bitpos;
1525
1526   /* Add RELOCATION to the right bits of X.  */
1527   x = ((x & ~howto->dst_mask)
1528        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1529
1530   /* Put the relocated value back in the object file.  */
1531   switch (size)
1532     {
1533     default:
1534       abort ();
1535     case 1:
1536       bfd_put_8 (input_bfd, x, location);
1537       break;
1538     case 2:
1539       bfd_put_16 (input_bfd, x, location);
1540       break;
1541     case 4:
1542       bfd_put_32 (input_bfd, x, location);
1543       break;
1544     case 8:
1545 #ifdef BFD64
1546       bfd_put_64 (input_bfd, x, location);
1547 #else
1548       abort ();
1549 #endif
1550       break;
1551     }
1552
1553   return flag;
1554 }
1555
1556 /* Clear a given location using a given howto, by applying a fixed relocation
1557    value and discarding any in-place addend.  This is used for fixed-up
1558    relocations against discarded symbols, to make ignorable debug or unwind
1559    information more obvious.  */
1560
1561 void
1562 _bfd_clear_contents (reloc_howto_type *howto,
1563                      bfd *input_bfd,
1564                      asection *input_section,
1565                      bfd_byte *location)
1566 {
1567   int size;
1568   bfd_vma x = 0;
1569
1570   /* Get the value we are going to relocate.  */
1571   size = bfd_get_reloc_size (howto);
1572   switch (size)
1573     {
1574     default:
1575       abort ();
1576     case 0:
1577       return;
1578     case 1:
1579       x = bfd_get_8 (input_bfd, location);
1580       break;
1581     case 2:
1582       x = bfd_get_16 (input_bfd, location);
1583       break;
1584     case 4:
1585       x = bfd_get_32 (input_bfd, location);
1586       break;
1587     case 8:
1588 #ifdef BFD64
1589       x = bfd_get_64 (input_bfd, location);
1590 #else
1591       abort ();
1592 #endif
1593       break;
1594     }
1595
1596   /* Zero out the unwanted bits of X.  */
1597   x &= ~howto->dst_mask;
1598
1599   /* For a range list, use 1 instead of 0 as placeholder.  0
1600      would terminate the list, hiding any later entries.  */
1601   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1602               ".debug_ranges") == 0
1603       && (howto->dst_mask & 1) != 0)
1604     x |= 1;
1605
1606   /* Put the relocated value back in the object file.  */
1607   switch (size)
1608     {
1609     default:
1610     case 0:
1611       abort ();
1612     case 1:
1613       bfd_put_8 (input_bfd, x, location);
1614       break;
1615     case 2:
1616       bfd_put_16 (input_bfd, x, location);
1617       break;
1618     case 4:
1619       bfd_put_32 (input_bfd, x, location);
1620       break;
1621     case 8:
1622 #ifdef BFD64
1623       bfd_put_64 (input_bfd, x, location);
1624 #else
1625       abort ();
1626 #endif
1627       break;
1628     }
1629 }
1630
1631 /*
1632 DOCDD
1633 INODE
1634         howto manager,  , typedef arelent, Relocations
1635
1636 SUBSECTION
1637         The howto manager
1638
1639         When an application wants to create a relocation, but doesn't
1640         know what the target machine might call it, it can find out by
1641         using this bit of code.
1642
1643 */
1644
1645 /*
1646 TYPEDEF
1647         bfd_reloc_code_type
1648
1649 DESCRIPTION
1650         The insides of a reloc code.  The idea is that, eventually, there
1651         will be one enumerator for every type of relocation we ever do.
1652         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1653         return a howto pointer.
1654
1655         This does mean that the application must determine the correct
1656         enumerator value; you can't get a howto pointer from a random set
1657         of attributes.
1658
1659 SENUM
1660    bfd_reloc_code_real
1661
1662 ENUM
1663   BFD_RELOC_64
1664 ENUMX
1665   BFD_RELOC_32
1666 ENUMX
1667   BFD_RELOC_26
1668 ENUMX
1669   BFD_RELOC_24
1670 ENUMX
1671   BFD_RELOC_16
1672 ENUMX
1673   BFD_RELOC_14
1674 ENUMX
1675   BFD_RELOC_8
1676 ENUMDOC
1677   Basic absolute relocations of N bits.
1678
1679 ENUM
1680   BFD_RELOC_64_PCREL
1681 ENUMX
1682   BFD_RELOC_32_PCREL
1683 ENUMX
1684   BFD_RELOC_24_PCREL
1685 ENUMX
1686   BFD_RELOC_16_PCREL
1687 ENUMX
1688   BFD_RELOC_12_PCREL
1689 ENUMX
1690   BFD_RELOC_8_PCREL
1691 ENUMDOC
1692   PC-relative relocations.  Sometimes these are relative to the address
1693 of the relocation itself; sometimes they are relative to the start of
1694 the section containing the relocation.  It depends on the specific target.
1695
1696 The 24-bit relocation is used in some Intel 960 configurations.
1697
1698 ENUM
1699   BFD_RELOC_32_SECREL
1700 ENUMDOC
1701   Section relative relocations.  Some targets need this for DWARF2.
1702
1703 ENUM
1704   BFD_RELOC_32_GOT_PCREL
1705 ENUMX
1706   BFD_RELOC_16_GOT_PCREL
1707 ENUMX
1708   BFD_RELOC_8_GOT_PCREL
1709 ENUMX
1710   BFD_RELOC_32_GOTOFF
1711 ENUMX
1712   BFD_RELOC_16_GOTOFF
1713 ENUMX
1714   BFD_RELOC_LO16_GOTOFF
1715 ENUMX
1716   BFD_RELOC_HI16_GOTOFF
1717 ENUMX
1718   BFD_RELOC_HI16_S_GOTOFF
1719 ENUMX
1720   BFD_RELOC_8_GOTOFF
1721 ENUMX
1722   BFD_RELOC_64_PLT_PCREL
1723 ENUMX
1724   BFD_RELOC_32_PLT_PCREL
1725 ENUMX
1726   BFD_RELOC_24_PLT_PCREL
1727 ENUMX
1728   BFD_RELOC_16_PLT_PCREL
1729 ENUMX
1730   BFD_RELOC_8_PLT_PCREL
1731 ENUMX
1732   BFD_RELOC_64_PLTOFF
1733 ENUMX
1734   BFD_RELOC_32_PLTOFF
1735 ENUMX
1736   BFD_RELOC_16_PLTOFF
1737 ENUMX
1738   BFD_RELOC_LO16_PLTOFF
1739 ENUMX
1740   BFD_RELOC_HI16_PLTOFF
1741 ENUMX
1742   BFD_RELOC_HI16_S_PLTOFF
1743 ENUMX
1744   BFD_RELOC_8_PLTOFF
1745 ENUMDOC
1746   For ELF.
1747
1748 ENUM
1749   BFD_RELOC_SIZE32
1750 ENUMX
1751   BFD_RELOC_SIZE64
1752 ENUMDOC
1753   Size relocations.
1754
1755 ENUM
1756   BFD_RELOC_68K_GLOB_DAT
1757 ENUMX
1758   BFD_RELOC_68K_JMP_SLOT
1759 ENUMX
1760   BFD_RELOC_68K_RELATIVE
1761 ENUMX
1762   BFD_RELOC_68K_TLS_GD32
1763 ENUMX
1764   BFD_RELOC_68K_TLS_GD16
1765 ENUMX
1766   BFD_RELOC_68K_TLS_GD8
1767 ENUMX
1768   BFD_RELOC_68K_TLS_LDM32
1769 ENUMX
1770   BFD_RELOC_68K_TLS_LDM16
1771 ENUMX
1772   BFD_RELOC_68K_TLS_LDM8
1773 ENUMX
1774   BFD_RELOC_68K_TLS_LDO32
1775 ENUMX
1776   BFD_RELOC_68K_TLS_LDO16
1777 ENUMX
1778   BFD_RELOC_68K_TLS_LDO8
1779 ENUMX
1780   BFD_RELOC_68K_TLS_IE32
1781 ENUMX
1782   BFD_RELOC_68K_TLS_IE16
1783 ENUMX
1784   BFD_RELOC_68K_TLS_IE8
1785 ENUMX
1786   BFD_RELOC_68K_TLS_LE32
1787 ENUMX
1788   BFD_RELOC_68K_TLS_LE16
1789 ENUMX
1790   BFD_RELOC_68K_TLS_LE8
1791 ENUMDOC
1792   Relocations used by 68K ELF.
1793
1794 ENUM
1795   BFD_RELOC_32_BASEREL
1796 ENUMX
1797   BFD_RELOC_16_BASEREL
1798 ENUMX
1799   BFD_RELOC_LO16_BASEREL
1800 ENUMX
1801   BFD_RELOC_HI16_BASEREL
1802 ENUMX
1803   BFD_RELOC_HI16_S_BASEREL
1804 ENUMX
1805   BFD_RELOC_8_BASEREL
1806 ENUMX
1807   BFD_RELOC_RVA
1808 ENUMDOC
1809   Linkage-table relative.
1810
1811 ENUM
1812   BFD_RELOC_8_FFnn
1813 ENUMDOC
1814   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1815
1816 ENUM
1817   BFD_RELOC_32_PCREL_S2
1818 ENUMX
1819   BFD_RELOC_16_PCREL_S2
1820 ENUMX
1821   BFD_RELOC_23_PCREL_S2
1822 ENUMDOC
1823   These PC-relative relocations are stored as word displacements --
1824 i.e., byte displacements shifted right two bits.  The 30-bit word
1825 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1826 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1827 signed 16-bit displacement is used on the MIPS, and the 23-bit
1828 displacement is used on the Alpha.
1829
1830 ENUM
1831   BFD_RELOC_HI22
1832 ENUMX
1833   BFD_RELOC_LO10
1834 ENUMDOC
1835   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1836 the target word.  These are used on the SPARC.
1837
1838 ENUM
1839   BFD_RELOC_GPREL16
1840 ENUMX
1841   BFD_RELOC_GPREL32
1842 ENUMDOC
1843   For systems that allocate a Global Pointer register, these are
1844 displacements off that register.  These relocation types are
1845 handled specially, because the value the register will have is
1846 decided relatively late.
1847
1848 ENUM
1849   BFD_RELOC_I960_CALLJ
1850 ENUMDOC
1851   Reloc types used for i960/b.out.
1852
1853 ENUM
1854   BFD_RELOC_NONE
1855 ENUMX
1856   BFD_RELOC_SPARC_WDISP22
1857 ENUMX
1858   BFD_RELOC_SPARC22
1859 ENUMX
1860   BFD_RELOC_SPARC13
1861 ENUMX
1862   BFD_RELOC_SPARC_GOT10
1863 ENUMX
1864   BFD_RELOC_SPARC_GOT13
1865 ENUMX
1866   BFD_RELOC_SPARC_GOT22
1867 ENUMX
1868   BFD_RELOC_SPARC_PC10
1869 ENUMX
1870   BFD_RELOC_SPARC_PC22
1871 ENUMX
1872   BFD_RELOC_SPARC_WPLT30
1873 ENUMX
1874   BFD_RELOC_SPARC_COPY
1875 ENUMX
1876   BFD_RELOC_SPARC_GLOB_DAT
1877 ENUMX
1878   BFD_RELOC_SPARC_JMP_SLOT
1879 ENUMX
1880   BFD_RELOC_SPARC_RELATIVE
1881 ENUMX
1882   BFD_RELOC_SPARC_UA16
1883 ENUMX
1884   BFD_RELOC_SPARC_UA32
1885 ENUMX
1886   BFD_RELOC_SPARC_UA64
1887 ENUMX
1888   BFD_RELOC_SPARC_GOTDATA_HIX22
1889 ENUMX
1890   BFD_RELOC_SPARC_GOTDATA_LOX10
1891 ENUMX
1892   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1893 ENUMX
1894   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1895 ENUMX
1896   BFD_RELOC_SPARC_GOTDATA_OP
1897 ENUMX
1898   BFD_RELOC_SPARC_JMP_IREL
1899 ENUMX
1900   BFD_RELOC_SPARC_IRELATIVE
1901 ENUMDOC
1902   SPARC ELF relocations.  There is probably some overlap with other
1903   relocation types already defined.
1904
1905 ENUM
1906   BFD_RELOC_SPARC_BASE13
1907 ENUMX
1908   BFD_RELOC_SPARC_BASE22
1909 ENUMDOC
1910   I think these are specific to SPARC a.out (e.g., Sun 4).
1911
1912 ENUMEQ
1913   BFD_RELOC_SPARC_64
1914   BFD_RELOC_64
1915 ENUMX
1916   BFD_RELOC_SPARC_10
1917 ENUMX
1918   BFD_RELOC_SPARC_11
1919 ENUMX
1920   BFD_RELOC_SPARC_OLO10
1921 ENUMX
1922   BFD_RELOC_SPARC_HH22
1923 ENUMX
1924   BFD_RELOC_SPARC_HM10
1925 ENUMX
1926   BFD_RELOC_SPARC_LM22
1927 ENUMX
1928   BFD_RELOC_SPARC_PC_HH22
1929 ENUMX
1930   BFD_RELOC_SPARC_PC_HM10
1931 ENUMX
1932   BFD_RELOC_SPARC_PC_LM22
1933 ENUMX
1934   BFD_RELOC_SPARC_WDISP16
1935 ENUMX
1936   BFD_RELOC_SPARC_WDISP19
1937 ENUMX
1938   BFD_RELOC_SPARC_7
1939 ENUMX
1940   BFD_RELOC_SPARC_6
1941 ENUMX
1942   BFD_RELOC_SPARC_5
1943 ENUMEQX
1944   BFD_RELOC_SPARC_DISP64
1945   BFD_RELOC_64_PCREL
1946 ENUMX
1947   BFD_RELOC_SPARC_PLT32
1948 ENUMX
1949   BFD_RELOC_SPARC_PLT64
1950 ENUMX
1951   BFD_RELOC_SPARC_HIX22
1952 ENUMX
1953   BFD_RELOC_SPARC_LOX10
1954 ENUMX
1955   BFD_RELOC_SPARC_H44
1956 ENUMX
1957   BFD_RELOC_SPARC_M44
1958 ENUMX
1959   BFD_RELOC_SPARC_L44
1960 ENUMX
1961   BFD_RELOC_SPARC_REGISTER
1962 ENUMX
1963   BFD_RELOC_SPARC_H34
1964 ENUMX
1965   BFD_RELOC_SPARC_SIZE32
1966 ENUMX
1967   BFD_RELOC_SPARC_SIZE64
1968 ENUMX
1969   BFD_RELOC_SPARC_WDISP10
1970 ENUMDOC
1971   SPARC64 relocations
1972
1973 ENUM
1974   BFD_RELOC_SPARC_REV32
1975 ENUMDOC
1976   SPARC little endian relocation
1977 ENUM
1978   BFD_RELOC_SPARC_TLS_GD_HI22
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_GD_LO10
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_GD_ADD
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_GD_CALL
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_LDM_HI22
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_LDM_LO10
1989 ENUMX
1990   BFD_RELOC_SPARC_TLS_LDM_ADD
1991 ENUMX
1992   BFD_RELOC_SPARC_TLS_LDM_CALL
1993 ENUMX
1994   BFD_RELOC_SPARC_TLS_LDO_HIX22
1995 ENUMX
1996   BFD_RELOC_SPARC_TLS_LDO_LOX10
1997 ENUMX
1998   BFD_RELOC_SPARC_TLS_LDO_ADD
1999 ENUMX
2000   BFD_RELOC_SPARC_TLS_IE_HI22
2001 ENUMX
2002   BFD_RELOC_SPARC_TLS_IE_LO10
2003 ENUMX
2004   BFD_RELOC_SPARC_TLS_IE_LD
2005 ENUMX
2006   BFD_RELOC_SPARC_TLS_IE_LDX
2007 ENUMX
2008   BFD_RELOC_SPARC_TLS_IE_ADD
2009 ENUMX
2010   BFD_RELOC_SPARC_TLS_LE_HIX22
2011 ENUMX
2012   BFD_RELOC_SPARC_TLS_LE_LOX10
2013 ENUMX
2014   BFD_RELOC_SPARC_TLS_DTPMOD32
2015 ENUMX
2016   BFD_RELOC_SPARC_TLS_DTPMOD64
2017 ENUMX
2018   BFD_RELOC_SPARC_TLS_DTPOFF32
2019 ENUMX
2020   BFD_RELOC_SPARC_TLS_DTPOFF64
2021 ENUMX
2022   BFD_RELOC_SPARC_TLS_TPOFF32
2023 ENUMX
2024   BFD_RELOC_SPARC_TLS_TPOFF64
2025 ENUMDOC
2026   SPARC TLS relocations
2027
2028 ENUM
2029   BFD_RELOC_SPU_IMM7
2030 ENUMX
2031   BFD_RELOC_SPU_IMM8
2032 ENUMX
2033   BFD_RELOC_SPU_IMM10
2034 ENUMX
2035   BFD_RELOC_SPU_IMM10W
2036 ENUMX
2037   BFD_RELOC_SPU_IMM16
2038 ENUMX
2039   BFD_RELOC_SPU_IMM16W
2040 ENUMX
2041   BFD_RELOC_SPU_IMM18
2042 ENUMX
2043   BFD_RELOC_SPU_PCREL9a
2044 ENUMX
2045   BFD_RELOC_SPU_PCREL9b
2046 ENUMX
2047   BFD_RELOC_SPU_PCREL16
2048 ENUMX
2049   BFD_RELOC_SPU_LO16
2050 ENUMX
2051   BFD_RELOC_SPU_HI16
2052 ENUMX
2053   BFD_RELOC_SPU_PPU32
2054 ENUMX
2055   BFD_RELOC_SPU_PPU64
2056 ENUMX
2057   BFD_RELOC_SPU_ADD_PIC
2058 ENUMDOC
2059   SPU Relocations.
2060
2061 ENUM
2062   BFD_RELOC_ALPHA_GPDISP_HI16
2063 ENUMDOC
2064   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2065      "addend" in some special way.
2066   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2067      writing; when reading, it will be the absolute section symbol.  The
2068      addend is the displacement in bytes of the "lda" instruction from
2069      the "ldah" instruction (which is at the address of this reloc).
2070 ENUM
2071   BFD_RELOC_ALPHA_GPDISP_LO16
2072 ENUMDOC
2073   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2074      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2075      relocations out, and is filled in with the file's GP value on
2076      reading, for convenience.
2077
2078 ENUM
2079   BFD_RELOC_ALPHA_GPDISP
2080 ENUMDOC
2081   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2082      relocation except that there is no accompanying GPDISP_LO16
2083      relocation.
2084
2085 ENUM
2086   BFD_RELOC_ALPHA_LITERAL
2087 ENUMX
2088   BFD_RELOC_ALPHA_ELF_LITERAL
2089 ENUMX
2090   BFD_RELOC_ALPHA_LITUSE
2091 ENUMDOC
2092   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2093      the assembler turns it into a LDQ instruction to load the address of
2094      the symbol, and then fills in a register in the real instruction.
2095
2096      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2097      section symbol.  The addend is ignored when writing, but is filled
2098      in with the file's GP value on reading, for convenience, as with the
2099      GPDISP_LO16 reloc.
2100
2101      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2102      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2103      but it generates output not based on the position within the .got
2104      section, but relative to the GP value chosen for the file during the
2105      final link stage.
2106
2107      The LITUSE reloc, on the instruction using the loaded address, gives
2108      information to the linker that it might be able to use to optimize
2109      away some literal section references.  The symbol is ignored (read
2110      as the absolute section symbol), and the "addend" indicates the type
2111      of instruction using the register:
2112               1 - "memory" fmt insn
2113               2 - byte-manipulation (byte offset reg)
2114               3 - jsr (target of branch)
2115
2116 ENUM
2117   BFD_RELOC_ALPHA_HINT
2118 ENUMDOC
2119   The HINT relocation indicates a value that should be filled into the
2120      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2121      prediction logic which may be provided on some processors.
2122
2123 ENUM
2124   BFD_RELOC_ALPHA_LINKAGE
2125 ENUMDOC
2126   The LINKAGE relocation outputs a linkage pair in the object file,
2127      which is filled by the linker.
2128
2129 ENUM
2130   BFD_RELOC_ALPHA_CODEADDR
2131 ENUMDOC
2132   The CODEADDR relocation outputs a STO_CA in the object file,
2133      which is filled by the linker.
2134
2135 ENUM
2136   BFD_RELOC_ALPHA_GPREL_HI16
2137 ENUMX
2138   BFD_RELOC_ALPHA_GPREL_LO16
2139 ENUMDOC
2140   The GPREL_HI/LO relocations together form a 32-bit offset from the
2141      GP register.
2142
2143 ENUM
2144   BFD_RELOC_ALPHA_BRSGP
2145 ENUMDOC
2146   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2147   share a common GP, and the target address is adjusted for
2148   STO_ALPHA_STD_GPLOAD.
2149
2150 ENUM
2151   BFD_RELOC_ALPHA_NOP
2152 ENUMDOC
2153   The NOP relocation outputs a NOP if the longword displacement
2154      between two procedure entry points is < 2^21.
2155
2156 ENUM
2157   BFD_RELOC_ALPHA_BSR
2158 ENUMDOC
2159   The BSR relocation outputs a BSR if the longword displacement
2160      between two procedure entry points is < 2^21.
2161
2162 ENUM
2163   BFD_RELOC_ALPHA_LDA
2164 ENUMDOC
2165   The LDA relocation outputs a LDA if the longword displacement
2166      between two procedure entry points is < 2^16.
2167
2168 ENUM
2169   BFD_RELOC_ALPHA_BOH
2170 ENUMDOC
2171   The BOH relocation outputs a BSR if the longword displacement
2172      between two procedure entry points is < 2^21, or else a hint.
2173
2174 ENUM
2175   BFD_RELOC_ALPHA_TLSGD
2176 ENUMX
2177   BFD_RELOC_ALPHA_TLSLDM
2178 ENUMX
2179   BFD_RELOC_ALPHA_DTPMOD64
2180 ENUMX
2181   BFD_RELOC_ALPHA_GOTDTPREL16
2182 ENUMX
2183   BFD_RELOC_ALPHA_DTPREL64
2184 ENUMX
2185   BFD_RELOC_ALPHA_DTPREL_HI16
2186 ENUMX
2187   BFD_RELOC_ALPHA_DTPREL_LO16
2188 ENUMX
2189   BFD_RELOC_ALPHA_DTPREL16
2190 ENUMX
2191   BFD_RELOC_ALPHA_GOTTPREL16
2192 ENUMX
2193   BFD_RELOC_ALPHA_TPREL64
2194 ENUMX
2195   BFD_RELOC_ALPHA_TPREL_HI16
2196 ENUMX
2197   BFD_RELOC_ALPHA_TPREL_LO16
2198 ENUMX
2199   BFD_RELOC_ALPHA_TPREL16
2200 ENUMDOC
2201   Alpha thread-local storage relocations.
2202
2203 ENUM
2204   BFD_RELOC_MIPS_JMP
2205 ENUMX
2206   BFD_RELOC_MICROMIPS_JMP
2207 ENUMDOC
2208   The MIPS jump instruction.
2209
2210 ENUM
2211   BFD_RELOC_MIPS16_JMP
2212 ENUMDOC
2213   The MIPS16 jump instruction.
2214
2215 ENUM
2216   BFD_RELOC_MIPS16_GPREL
2217 ENUMDOC
2218   MIPS16 GP relative reloc.
2219
2220 ENUM
2221   BFD_RELOC_HI16
2222 ENUMDOC
2223   High 16 bits of 32-bit value; simple reloc.
2224
2225 ENUM
2226   BFD_RELOC_HI16_S
2227 ENUMDOC
2228   High 16 bits of 32-bit value but the low 16 bits will be sign
2229      extended and added to form the final result.  If the low 16
2230      bits form a negative number, we need to add one to the high value
2231      to compensate for the borrow when the low bits are added.
2232
2233 ENUM
2234   BFD_RELOC_LO16
2235 ENUMDOC
2236   Low 16 bits.
2237
2238 ENUM
2239   BFD_RELOC_HI16_PCREL
2240 ENUMDOC
2241   High 16 bits of 32-bit pc-relative value
2242 ENUM
2243   BFD_RELOC_HI16_S_PCREL
2244 ENUMDOC
2245   High 16 bits of 32-bit pc-relative value, adjusted
2246 ENUM
2247   BFD_RELOC_LO16_PCREL
2248 ENUMDOC
2249   Low 16 bits of pc-relative value
2250
2251 ENUM
2252   BFD_RELOC_MIPS16_GOT16
2253 ENUMX
2254   BFD_RELOC_MIPS16_CALL16
2255 ENUMDOC
2256   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2257      16-bit immediate fields
2258 ENUM
2259   BFD_RELOC_MIPS16_HI16
2260 ENUMDOC
2261   MIPS16 high 16 bits of 32-bit value.
2262 ENUM
2263   BFD_RELOC_MIPS16_HI16_S
2264 ENUMDOC
2265   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2266      extended and added to form the final result.  If the low 16
2267      bits form a negative number, we need to add one to the high value
2268      to compensate for the borrow when the low bits are added.
2269 ENUM
2270   BFD_RELOC_MIPS16_LO16
2271 ENUMDOC
2272   MIPS16 low 16 bits.
2273
2274 ENUM
2275   BFD_RELOC_MIPS16_TLS_GD
2276 ENUMX
2277   BFD_RELOC_MIPS16_TLS_LDM
2278 ENUMX
2279   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2280 ENUMX
2281   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2282 ENUMX
2283   BFD_RELOC_MIPS16_TLS_GOTTPREL
2284 ENUMX
2285   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2286 ENUMX
2287   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2288 ENUMDOC
2289   MIPS16 TLS relocations
2290
2291 ENUM
2292   BFD_RELOC_MIPS_LITERAL
2293 ENUMX
2294   BFD_RELOC_MICROMIPS_LITERAL
2295 ENUMDOC
2296   Relocation against a MIPS literal section.
2297
2298 ENUM
2299   BFD_RELOC_MICROMIPS_7_PCREL_S1
2300 ENUMX
2301   BFD_RELOC_MICROMIPS_10_PCREL_S1
2302 ENUMX
2303   BFD_RELOC_MICROMIPS_16_PCREL_S1
2304 ENUMDOC
2305   microMIPS PC-relative relocations.
2306
2307 ENUM
2308   BFD_RELOC_MIPS16_16_PCREL_S1
2309 ENUMDOC
2310   MIPS16 PC-relative relocation.
2311
2312 ENUM
2313   BFD_RELOC_MIPS_21_PCREL_S2
2314 ENUMX
2315   BFD_RELOC_MIPS_26_PCREL_S2
2316 ENUMX
2317   BFD_RELOC_MIPS_18_PCREL_S3
2318 ENUMX
2319   BFD_RELOC_MIPS_19_PCREL_S2
2320 ENUMDOC
2321   MIPS PC-relative relocations.
2322
2323 ENUM
2324   BFD_RELOC_MICROMIPS_GPREL16
2325 ENUMX
2326   BFD_RELOC_MICROMIPS_HI16
2327 ENUMX
2328   BFD_RELOC_MICROMIPS_HI16_S
2329 ENUMX
2330   BFD_RELOC_MICROMIPS_LO16
2331 ENUMDOC
2332   microMIPS versions of generic BFD relocs.
2333
2334 ENUM
2335   BFD_RELOC_MIPS_GOT16
2336 ENUMX
2337   BFD_RELOC_MICROMIPS_GOT16
2338 ENUMX
2339   BFD_RELOC_MIPS_CALL16
2340 ENUMX
2341   BFD_RELOC_MICROMIPS_CALL16
2342 ENUMX
2343   BFD_RELOC_MIPS_GOT_HI16
2344 ENUMX
2345   BFD_RELOC_MICROMIPS_GOT_HI16
2346 ENUMX
2347   BFD_RELOC_MIPS_GOT_LO16
2348 ENUMX
2349   BFD_RELOC_MICROMIPS_GOT_LO16
2350 ENUMX
2351   BFD_RELOC_MIPS_CALL_HI16
2352 ENUMX
2353   BFD_RELOC_MICROMIPS_CALL_HI16
2354 ENUMX
2355   BFD_RELOC_MIPS_CALL_LO16
2356 ENUMX
2357   BFD_RELOC_MICROMIPS_CALL_LO16
2358 ENUMX
2359   BFD_RELOC_MIPS_SUB
2360 ENUMX
2361   BFD_RELOC_MICROMIPS_SUB
2362 ENUMX
2363   BFD_RELOC_MIPS_GOT_PAGE
2364 ENUMX
2365   BFD_RELOC_MICROMIPS_GOT_PAGE
2366 ENUMX
2367   BFD_RELOC_MIPS_GOT_OFST
2368 ENUMX
2369   BFD_RELOC_MICROMIPS_GOT_OFST
2370 ENUMX
2371   BFD_RELOC_MIPS_GOT_DISP
2372 ENUMX
2373   BFD_RELOC_MICROMIPS_GOT_DISP
2374 ENUMX
2375   BFD_RELOC_MIPS_SHIFT5
2376 ENUMX
2377   BFD_RELOC_MIPS_SHIFT6
2378 ENUMX
2379   BFD_RELOC_MIPS_INSERT_A
2380 ENUMX
2381   BFD_RELOC_MIPS_INSERT_B
2382 ENUMX
2383   BFD_RELOC_MIPS_DELETE
2384 ENUMX
2385   BFD_RELOC_MIPS_HIGHEST
2386 ENUMX
2387   BFD_RELOC_MICROMIPS_HIGHEST
2388 ENUMX
2389   BFD_RELOC_MIPS_HIGHER
2390 ENUMX
2391   BFD_RELOC_MICROMIPS_HIGHER
2392 ENUMX
2393   BFD_RELOC_MIPS_SCN_DISP
2394 ENUMX
2395   BFD_RELOC_MICROMIPS_SCN_DISP
2396 ENUMX
2397   BFD_RELOC_MIPS_REL16
2398 ENUMX
2399   BFD_RELOC_MIPS_RELGOT
2400 ENUMX
2401   BFD_RELOC_MIPS_JALR
2402 ENUMX
2403   BFD_RELOC_MICROMIPS_JALR
2404 ENUMX
2405   BFD_RELOC_MIPS_TLS_DTPMOD32
2406 ENUMX
2407   BFD_RELOC_MIPS_TLS_DTPREL32
2408 ENUMX
2409   BFD_RELOC_MIPS_TLS_DTPMOD64
2410 ENUMX
2411   BFD_RELOC_MIPS_TLS_DTPREL64
2412 ENUMX
2413   BFD_RELOC_MIPS_TLS_GD
2414 ENUMX
2415   BFD_RELOC_MICROMIPS_TLS_GD
2416 ENUMX
2417   BFD_RELOC_MIPS_TLS_LDM
2418 ENUMX
2419   BFD_RELOC_MICROMIPS_TLS_LDM
2420 ENUMX
2421   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2422 ENUMX
2423   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2424 ENUMX
2425   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2426 ENUMX
2427   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2428 ENUMX
2429   BFD_RELOC_MIPS_TLS_GOTTPREL
2430 ENUMX
2431   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2432 ENUMX
2433   BFD_RELOC_MIPS_TLS_TPREL32
2434 ENUMX
2435   BFD_RELOC_MIPS_TLS_TPREL64
2436 ENUMX
2437   BFD_RELOC_MIPS_TLS_TPREL_HI16
2438 ENUMX
2439   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2440 ENUMX
2441   BFD_RELOC_MIPS_TLS_TPREL_LO16
2442 ENUMX
2443   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2444 ENUMX
2445   BFD_RELOC_MIPS_EH
2446 ENUMDOC
2447   MIPS ELF relocations.
2448 COMMENT
2449
2450 ENUM
2451   BFD_RELOC_MIPS_COPY
2452 ENUMX
2453   BFD_RELOC_MIPS_JUMP_SLOT
2454 ENUMDOC
2455   MIPS ELF relocations (VxWorks and PLT extensions).
2456 COMMENT
2457
2458 ENUM
2459   BFD_RELOC_MOXIE_10_PCREL
2460 ENUMDOC
2461   Moxie ELF relocations.
2462 COMMENT
2463
2464 ENUM
2465   BFD_RELOC_FT32_10
2466 ENUMX
2467   BFD_RELOC_FT32_20
2468 ENUMX
2469   BFD_RELOC_FT32_17
2470 ENUMX
2471   BFD_RELOC_FT32_18
2472 ENUMDOC
2473   FT32 ELF relocations.
2474 COMMENT
2475
2476 ENUM
2477   BFD_RELOC_FRV_LABEL16
2478 ENUMX
2479   BFD_RELOC_FRV_LABEL24
2480 ENUMX
2481   BFD_RELOC_FRV_LO16
2482 ENUMX
2483   BFD_RELOC_FRV_HI16
2484 ENUMX
2485   BFD_RELOC_FRV_GPREL12
2486 ENUMX
2487   BFD_RELOC_FRV_GPRELU12
2488 ENUMX
2489   BFD_RELOC_FRV_GPREL32
2490 ENUMX
2491   BFD_RELOC_FRV_GPRELHI
2492 ENUMX
2493   BFD_RELOC_FRV_GPRELLO
2494 ENUMX
2495   BFD_RELOC_FRV_GOT12
2496 ENUMX
2497   BFD_RELOC_FRV_GOTHI
2498 ENUMX
2499   BFD_RELOC_FRV_GOTLO
2500 ENUMX
2501   BFD_RELOC_FRV_FUNCDESC
2502 ENUMX
2503   BFD_RELOC_FRV_FUNCDESC_GOT12
2504 ENUMX
2505   BFD_RELOC_FRV_FUNCDESC_GOTHI
2506 ENUMX
2507   BFD_RELOC_FRV_FUNCDESC_GOTLO
2508 ENUMX
2509   BFD_RELOC_FRV_FUNCDESC_VALUE
2510 ENUMX
2511   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2512 ENUMX
2513   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2514 ENUMX
2515   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2516 ENUMX
2517   BFD_RELOC_FRV_GOTOFF12
2518 ENUMX
2519   BFD_RELOC_FRV_GOTOFFHI
2520 ENUMX
2521   BFD_RELOC_FRV_GOTOFFLO
2522 ENUMX
2523   BFD_RELOC_FRV_GETTLSOFF
2524 ENUMX
2525   BFD_RELOC_FRV_TLSDESC_VALUE
2526 ENUMX
2527   BFD_RELOC_FRV_GOTTLSDESC12
2528 ENUMX
2529   BFD_RELOC_FRV_GOTTLSDESCHI
2530 ENUMX
2531   BFD_RELOC_FRV_GOTTLSDESCLO
2532 ENUMX
2533   BFD_RELOC_FRV_TLSMOFF12
2534 ENUMX
2535   BFD_RELOC_FRV_TLSMOFFHI
2536 ENUMX
2537   BFD_RELOC_FRV_TLSMOFFLO
2538 ENUMX
2539   BFD_RELOC_FRV_GOTTLSOFF12
2540 ENUMX
2541   BFD_RELOC_FRV_GOTTLSOFFHI
2542 ENUMX
2543   BFD_RELOC_FRV_GOTTLSOFFLO
2544 ENUMX
2545   BFD_RELOC_FRV_TLSOFF
2546 ENUMX
2547   BFD_RELOC_FRV_TLSDESC_RELAX
2548 ENUMX
2549   BFD_RELOC_FRV_GETTLSOFF_RELAX
2550 ENUMX
2551   BFD_RELOC_FRV_TLSOFF_RELAX
2552 ENUMX
2553   BFD_RELOC_FRV_TLSMOFF
2554 ENUMDOC
2555   Fujitsu Frv Relocations.
2556 COMMENT
2557
2558 ENUM
2559   BFD_RELOC_MN10300_GOTOFF24
2560 ENUMDOC
2561   This is a 24bit GOT-relative reloc for the mn10300.
2562 ENUM
2563   BFD_RELOC_MN10300_GOT32
2564 ENUMDOC
2565   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2566   in the instruction.
2567 ENUM
2568   BFD_RELOC_MN10300_GOT24
2569 ENUMDOC
2570   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2571   in the instruction.
2572 ENUM
2573   BFD_RELOC_MN10300_GOT16
2574 ENUMDOC
2575   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2576   in the instruction.
2577 ENUM
2578   BFD_RELOC_MN10300_COPY
2579 ENUMDOC
2580   Copy symbol at runtime.
2581 ENUM
2582   BFD_RELOC_MN10300_GLOB_DAT
2583 ENUMDOC
2584   Create GOT entry.
2585 ENUM
2586   BFD_RELOC_MN10300_JMP_SLOT
2587 ENUMDOC
2588   Create PLT entry.
2589 ENUM
2590   BFD_RELOC_MN10300_RELATIVE
2591 ENUMDOC
2592   Adjust by program base.
2593 ENUM
2594   BFD_RELOC_MN10300_SYM_DIFF
2595 ENUMDOC
2596   Together with another reloc targeted at the same location,
2597   allows for a value that is the difference of two symbols
2598   in the same section.
2599 ENUM
2600   BFD_RELOC_MN10300_ALIGN
2601 ENUMDOC
2602   The addend of this reloc is an alignment power that must
2603   be honoured at the offset's location, regardless of linker
2604   relaxation.
2605 ENUM
2606   BFD_RELOC_MN10300_TLS_GD
2607 ENUMX
2608   BFD_RELOC_MN10300_TLS_LD
2609 ENUMX
2610   BFD_RELOC_MN10300_TLS_LDO
2611 ENUMX
2612   BFD_RELOC_MN10300_TLS_GOTIE
2613 ENUMX
2614   BFD_RELOC_MN10300_TLS_IE
2615 ENUMX
2616   BFD_RELOC_MN10300_TLS_LE
2617 ENUMX
2618   BFD_RELOC_MN10300_TLS_DTPMOD
2619 ENUMX
2620   BFD_RELOC_MN10300_TLS_DTPOFF
2621 ENUMX
2622   BFD_RELOC_MN10300_TLS_TPOFF
2623 ENUMDOC
2624   Various TLS-related relocations.
2625 ENUM
2626   BFD_RELOC_MN10300_32_PCREL
2627 ENUMDOC
2628   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2629   instruction.
2630 ENUM
2631   BFD_RELOC_MN10300_16_PCREL
2632 ENUMDOC
2633   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2634   instruction.
2635 COMMENT
2636
2637 ENUM
2638   BFD_RELOC_386_GOT32
2639 ENUMX
2640   BFD_RELOC_386_PLT32
2641 ENUMX
2642   BFD_RELOC_386_COPY
2643 ENUMX
2644   BFD_RELOC_386_GLOB_DAT
2645 ENUMX
2646   BFD_RELOC_386_JUMP_SLOT
2647 ENUMX
2648   BFD_RELOC_386_RELATIVE
2649 ENUMX
2650   BFD_RELOC_386_GOTOFF
2651 ENUMX
2652   BFD_RELOC_386_GOTPC
2653 ENUMX
2654   BFD_RELOC_386_TLS_TPOFF
2655 ENUMX
2656   BFD_RELOC_386_TLS_IE
2657 ENUMX
2658   BFD_RELOC_386_TLS_GOTIE
2659 ENUMX
2660   BFD_RELOC_386_TLS_LE
2661 ENUMX
2662   BFD_RELOC_386_TLS_GD
2663 ENUMX
2664   BFD_RELOC_386_TLS_LDM
2665 ENUMX
2666   BFD_RELOC_386_TLS_LDO_32
2667 ENUMX
2668   BFD_RELOC_386_TLS_IE_32
2669 ENUMX
2670   BFD_RELOC_386_TLS_LE_32
2671 ENUMX
2672   BFD_RELOC_386_TLS_DTPMOD32
2673 ENUMX
2674   BFD_RELOC_386_TLS_DTPOFF32
2675 ENUMX
2676   BFD_RELOC_386_TLS_TPOFF32
2677 ENUMX
2678   BFD_RELOC_386_TLS_GOTDESC
2679 ENUMX
2680   BFD_RELOC_386_TLS_DESC_CALL
2681 ENUMX
2682   BFD_RELOC_386_TLS_DESC
2683 ENUMX
2684   BFD_RELOC_386_IRELATIVE
2685 ENUMX
2686   BFD_RELOC_386_GOT32X
2687 ENUMDOC
2688   i386/elf relocations
2689
2690 ENUM
2691   BFD_RELOC_X86_64_GOT32
2692 ENUMX
2693   BFD_RELOC_X86_64_PLT32
2694 ENUMX
2695   BFD_RELOC_X86_64_COPY
2696 ENUMX
2697   BFD_RELOC_X86_64_GLOB_DAT
2698 ENUMX
2699   BFD_RELOC_X86_64_JUMP_SLOT
2700 ENUMX
2701   BFD_RELOC_X86_64_RELATIVE
2702 ENUMX
2703   BFD_RELOC_X86_64_GOTPCREL
2704 ENUMX
2705   BFD_RELOC_X86_64_32S
2706 ENUMX
2707   BFD_RELOC_X86_64_DTPMOD64
2708 ENUMX
2709   BFD_RELOC_X86_64_DTPOFF64
2710 ENUMX
2711   BFD_RELOC_X86_64_TPOFF64
2712 ENUMX
2713   BFD_RELOC_X86_64_TLSGD
2714 ENUMX
2715   BFD_RELOC_X86_64_TLSLD
2716 ENUMX
2717   BFD_RELOC_X86_64_DTPOFF32
2718 ENUMX
2719   BFD_RELOC_X86_64_GOTTPOFF
2720 ENUMX
2721   BFD_RELOC_X86_64_TPOFF32
2722 ENUMX
2723   BFD_RELOC_X86_64_GOTOFF64
2724 ENUMX
2725   BFD_RELOC_X86_64_GOTPC32
2726 ENUMX
2727   BFD_RELOC_X86_64_GOT64
2728 ENUMX
2729   BFD_RELOC_X86_64_GOTPCREL64
2730 ENUMX
2731   BFD_RELOC_X86_64_GOTPC64
2732 ENUMX
2733   BFD_RELOC_X86_64_GOTPLT64
2734 ENUMX
2735   BFD_RELOC_X86_64_PLTOFF64
2736 ENUMX
2737   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2738 ENUMX
2739   BFD_RELOC_X86_64_TLSDESC_CALL
2740 ENUMX
2741   BFD_RELOC_X86_64_TLSDESC
2742 ENUMX
2743   BFD_RELOC_X86_64_IRELATIVE
2744 ENUMX
2745   BFD_RELOC_X86_64_PC32_BND
2746 ENUMX
2747   BFD_RELOC_X86_64_PLT32_BND
2748 ENUMX
2749   BFD_RELOC_X86_64_GOTPCRELX
2750 ENUMX
2751   BFD_RELOC_X86_64_REX_GOTPCRELX
2752 ENUMDOC
2753   x86-64/elf relocations
2754
2755 ENUM
2756   BFD_RELOC_NS32K_IMM_8
2757 ENUMX
2758   BFD_RELOC_NS32K_IMM_16
2759 ENUMX
2760   BFD_RELOC_NS32K_IMM_32
2761 ENUMX
2762   BFD_RELOC_NS32K_IMM_8_PCREL
2763 ENUMX
2764   BFD_RELOC_NS32K_IMM_16_PCREL
2765 ENUMX
2766   BFD_RELOC_NS32K_IMM_32_PCREL
2767 ENUMX
2768   BFD_RELOC_NS32K_DISP_8
2769 ENUMX
2770   BFD_RELOC_NS32K_DISP_16
2771 ENUMX
2772   BFD_RELOC_NS32K_DISP_32
2773 ENUMX
2774   BFD_RELOC_NS32K_DISP_8_PCREL
2775 ENUMX
2776   BFD_RELOC_NS32K_DISP_16_PCREL
2777 ENUMX
2778   BFD_RELOC_NS32K_DISP_32_PCREL
2779 ENUMDOC
2780   ns32k relocations
2781
2782 ENUM
2783   BFD_RELOC_PDP11_DISP_8_PCREL
2784 ENUMX
2785   BFD_RELOC_PDP11_DISP_6_PCREL
2786 ENUMDOC
2787   PDP11 relocations
2788
2789 ENUM
2790   BFD_RELOC_PJ_CODE_HI16
2791 ENUMX
2792   BFD_RELOC_PJ_CODE_LO16
2793 ENUMX
2794   BFD_RELOC_PJ_CODE_DIR16
2795 ENUMX
2796   BFD_RELOC_PJ_CODE_DIR32
2797 ENUMX
2798   BFD_RELOC_PJ_CODE_REL16
2799 ENUMX
2800   BFD_RELOC_PJ_CODE_REL32
2801 ENUMDOC
2802   Picojava relocs.  Not all of these appear in object files.
2803
2804 ENUM
2805   BFD_RELOC_PPC_B26
2806 ENUMX
2807   BFD_RELOC_PPC_BA26
2808 ENUMX
2809   BFD_RELOC_PPC_TOC16
2810 ENUMX
2811   BFD_RELOC_PPC_B16
2812 ENUMX
2813   BFD_RELOC_PPC_B16_BRTAKEN
2814 ENUMX
2815   BFD_RELOC_PPC_B16_BRNTAKEN
2816 ENUMX
2817   BFD_RELOC_PPC_BA16
2818 ENUMX
2819   BFD_RELOC_PPC_BA16_BRTAKEN
2820 ENUMX
2821   BFD_RELOC_PPC_BA16_BRNTAKEN
2822 ENUMX
2823   BFD_RELOC_PPC_COPY
2824 ENUMX
2825   BFD_RELOC_PPC_GLOB_DAT
2826 ENUMX
2827   BFD_RELOC_PPC_JMP_SLOT
2828 ENUMX
2829   BFD_RELOC_PPC_RELATIVE
2830 ENUMX
2831   BFD_RELOC_PPC_LOCAL24PC
2832 ENUMX
2833   BFD_RELOC_PPC_EMB_NADDR32
2834 ENUMX
2835   BFD_RELOC_PPC_EMB_NADDR16
2836 ENUMX
2837   BFD_RELOC_PPC_EMB_NADDR16_LO
2838 ENUMX
2839   BFD_RELOC_PPC_EMB_NADDR16_HI
2840 ENUMX
2841   BFD_RELOC_PPC_EMB_NADDR16_HA
2842 ENUMX
2843   BFD_RELOC_PPC_EMB_SDAI16
2844 ENUMX
2845   BFD_RELOC_PPC_EMB_SDA2I16
2846 ENUMX
2847   BFD_RELOC_PPC_EMB_SDA2REL
2848 ENUMX
2849   BFD_RELOC_PPC_EMB_SDA21
2850 ENUMX
2851   BFD_RELOC_PPC_EMB_MRKREF
2852 ENUMX
2853   BFD_RELOC_PPC_EMB_RELSEC16
2854 ENUMX
2855   BFD_RELOC_PPC_EMB_RELST_LO
2856 ENUMX
2857   BFD_RELOC_PPC_EMB_RELST_HI
2858 ENUMX
2859   BFD_RELOC_PPC_EMB_RELST_HA
2860 ENUMX
2861   BFD_RELOC_PPC_EMB_BIT_FLD
2862 ENUMX
2863   BFD_RELOC_PPC_EMB_RELSDA
2864 ENUMX
2865   BFD_RELOC_PPC_VLE_REL8
2866 ENUMX
2867   BFD_RELOC_PPC_VLE_REL15
2868 ENUMX
2869   BFD_RELOC_PPC_VLE_REL24
2870 ENUMX
2871   BFD_RELOC_PPC_VLE_LO16A
2872 ENUMX
2873   BFD_RELOC_PPC_VLE_LO16D
2874 ENUMX
2875   BFD_RELOC_PPC_VLE_HI16A
2876 ENUMX
2877   BFD_RELOC_PPC_VLE_HI16D
2878 ENUMX
2879   BFD_RELOC_PPC_VLE_HA16A
2880 ENUMX
2881   BFD_RELOC_PPC_VLE_HA16D
2882 ENUMX
2883   BFD_RELOC_PPC_VLE_SDA21
2884 ENUMX
2885   BFD_RELOC_PPC_VLE_SDA21_LO
2886 ENUMX
2887   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2888 ENUMX
2889   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2890 ENUMX
2891   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2892 ENUMX
2893   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2894 ENUMX
2895   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2896 ENUMX
2897   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2898 ENUMX
2899   BFD_RELOC_PPC_REL16DX_HA
2900 ENUMX
2901   BFD_RELOC_PPC64_HIGHER
2902 ENUMX
2903   BFD_RELOC_PPC64_HIGHER_S
2904 ENUMX
2905   BFD_RELOC_PPC64_HIGHEST
2906 ENUMX
2907   BFD_RELOC_PPC64_HIGHEST_S
2908 ENUMX
2909   BFD_RELOC_PPC64_TOC16_LO
2910 ENUMX
2911   BFD_RELOC_PPC64_TOC16_HI
2912 ENUMX
2913   BFD_RELOC_PPC64_TOC16_HA
2914 ENUMX
2915   BFD_RELOC_PPC64_TOC
2916 ENUMX
2917   BFD_RELOC_PPC64_PLTGOT16
2918 ENUMX
2919   BFD_RELOC_PPC64_PLTGOT16_LO
2920 ENUMX
2921   BFD_RELOC_PPC64_PLTGOT16_HI
2922 ENUMX
2923   BFD_RELOC_PPC64_PLTGOT16_HA
2924 ENUMX
2925   BFD_RELOC_PPC64_ADDR16_DS
2926 ENUMX
2927   BFD_RELOC_PPC64_ADDR16_LO_DS
2928 ENUMX
2929   BFD_RELOC_PPC64_GOT16_DS
2930 ENUMX
2931   BFD_RELOC_PPC64_GOT16_LO_DS
2932 ENUMX
2933   BFD_RELOC_PPC64_PLT16_LO_DS
2934 ENUMX
2935   BFD_RELOC_PPC64_SECTOFF_DS
2936 ENUMX
2937   BFD_RELOC_PPC64_SECTOFF_LO_DS
2938 ENUMX
2939   BFD_RELOC_PPC64_TOC16_DS
2940 ENUMX
2941   BFD_RELOC_PPC64_TOC16_LO_DS
2942 ENUMX
2943   BFD_RELOC_PPC64_PLTGOT16_DS
2944 ENUMX
2945   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2946 ENUMX
2947   BFD_RELOC_PPC64_ADDR16_HIGH
2948 ENUMX
2949   BFD_RELOC_PPC64_ADDR16_HIGHA
2950 ENUMX
2951   BFD_RELOC_PPC64_ADDR64_LOCAL
2952 ENUMX
2953   BFD_RELOC_PPC64_ENTRY
2954 ENUMDOC
2955   Power(rs6000) and PowerPC relocations.
2956
2957 ENUM
2958   BFD_RELOC_PPC_TLS
2959 ENUMX
2960   BFD_RELOC_PPC_TLSGD
2961 ENUMX
2962   BFD_RELOC_PPC_TLSLD
2963 ENUMX
2964   BFD_RELOC_PPC_DTPMOD
2965 ENUMX
2966   BFD_RELOC_PPC_TPREL16
2967 ENUMX
2968   BFD_RELOC_PPC_TPREL16_LO
2969 ENUMX
2970   BFD_RELOC_PPC_TPREL16_HI
2971 ENUMX
2972   BFD_RELOC_PPC_TPREL16_HA
2973 ENUMX
2974   BFD_RELOC_PPC_TPREL
2975 ENUMX
2976   BFD_RELOC_PPC_DTPREL16
2977 ENUMX
2978   BFD_RELOC_PPC_DTPREL16_LO
2979 ENUMX
2980   BFD_RELOC_PPC_DTPREL16_HI
2981 ENUMX
2982   BFD_RELOC_PPC_DTPREL16_HA
2983 ENUMX
2984   BFD_RELOC_PPC_DTPREL
2985 ENUMX
2986   BFD_RELOC_PPC_GOT_TLSGD16
2987 ENUMX
2988   BFD_RELOC_PPC_GOT_TLSGD16_LO
2989 ENUMX
2990   BFD_RELOC_PPC_GOT_TLSGD16_HI
2991 ENUMX
2992   BFD_RELOC_PPC_GOT_TLSGD16_HA
2993 ENUMX
2994   BFD_RELOC_PPC_GOT_TLSLD16
2995 ENUMX
2996   BFD_RELOC_PPC_GOT_TLSLD16_LO
2997 ENUMX
2998   BFD_RELOC_PPC_GOT_TLSLD16_HI
2999 ENUMX
3000   BFD_RELOC_PPC_GOT_TLSLD16_HA
3001 ENUMX
3002   BFD_RELOC_PPC_GOT_TPREL16
3003 ENUMX
3004   BFD_RELOC_PPC_GOT_TPREL16_LO
3005 ENUMX
3006   BFD_RELOC_PPC_GOT_TPREL16_HI
3007 ENUMX
3008   BFD_RELOC_PPC_GOT_TPREL16_HA
3009 ENUMX
3010   BFD_RELOC_PPC_GOT_DTPREL16
3011 ENUMX
3012   BFD_RELOC_PPC_GOT_DTPREL16_LO
3013 ENUMX
3014   BFD_RELOC_PPC_GOT_DTPREL16_HI
3015 ENUMX
3016   BFD_RELOC_PPC_GOT_DTPREL16_HA
3017 ENUMX
3018   BFD_RELOC_PPC64_TPREL16_DS
3019 ENUMX
3020   BFD_RELOC_PPC64_TPREL16_LO_DS
3021 ENUMX
3022   BFD_RELOC_PPC64_TPREL16_HIGHER
3023 ENUMX
3024   BFD_RELOC_PPC64_TPREL16_HIGHERA
3025 ENUMX
3026   BFD_RELOC_PPC64_TPREL16_HIGHEST
3027 ENUMX
3028   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3029 ENUMX
3030   BFD_RELOC_PPC64_DTPREL16_DS
3031 ENUMX
3032   BFD_RELOC_PPC64_DTPREL16_LO_DS
3033 ENUMX
3034   BFD_RELOC_PPC64_DTPREL16_HIGHER
3035 ENUMX
3036   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3037 ENUMX
3038   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3039 ENUMX
3040   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3041 ENUMX
3042   BFD_RELOC_PPC64_TPREL16_HIGH
3043 ENUMX
3044   BFD_RELOC_PPC64_TPREL16_HIGHA
3045 ENUMX
3046   BFD_RELOC_PPC64_DTPREL16_HIGH
3047 ENUMX
3048   BFD_RELOC_PPC64_DTPREL16_HIGHA
3049 ENUMDOC
3050   PowerPC and PowerPC64 thread-local storage relocations.
3051
3052 ENUM
3053   BFD_RELOC_I370_D12
3054 ENUMDOC
3055   IBM 370/390 relocations
3056
3057 ENUM
3058   BFD_RELOC_CTOR
3059 ENUMDOC
3060   The type of reloc used to build a constructor table - at the moment
3061   probably a 32 bit wide absolute relocation, but the target can choose.
3062   It generally does map to one of the other relocation types.
3063
3064 ENUM
3065   BFD_RELOC_ARM_PCREL_BRANCH
3066 ENUMDOC
3067   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3068   not stored in the instruction.
3069 ENUM
3070   BFD_RELOC_ARM_PCREL_BLX
3071 ENUMDOC
3072   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3073   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3074   field in the instruction.
3075 ENUM
3076   BFD_RELOC_THUMB_PCREL_BLX
3077 ENUMDOC
3078   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3079   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3080   field in the instruction.
3081 ENUM
3082   BFD_RELOC_ARM_PCREL_CALL
3083 ENUMDOC
3084   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3085 ENUM
3086   BFD_RELOC_ARM_PCREL_JUMP
3087 ENUMDOC
3088   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3089
3090 ENUM
3091   BFD_RELOC_THUMB_PCREL_BRANCH7
3092 ENUMX
3093   BFD_RELOC_THUMB_PCREL_BRANCH9
3094 ENUMX
3095   BFD_RELOC_THUMB_PCREL_BRANCH12
3096 ENUMX
3097   BFD_RELOC_THUMB_PCREL_BRANCH20
3098 ENUMX
3099   BFD_RELOC_THUMB_PCREL_BRANCH23
3100 ENUMX
3101   BFD_RELOC_THUMB_PCREL_BRANCH25
3102 ENUMDOC
3103   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3104   The lowest bit must be zero and is not stored in the instruction.
3105   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3106   "nn" one smaller in all cases.  Note further that BRANCH23
3107   corresponds to R_ARM_THM_CALL.
3108
3109 ENUM
3110   BFD_RELOC_ARM_OFFSET_IMM
3111 ENUMDOC
3112   12-bit immediate offset, used in ARM-format ldr and str instructions.
3113
3114 ENUM
3115   BFD_RELOC_ARM_THUMB_OFFSET
3116 ENUMDOC
3117   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3118
3119 ENUM
3120   BFD_RELOC_ARM_TARGET1
3121 ENUMDOC
3122   Pc-relative or absolute relocation depending on target.  Used for
3123   entries in .init_array sections.
3124 ENUM
3125   BFD_RELOC_ARM_ROSEGREL32
3126 ENUMDOC
3127   Read-only segment base relative address.
3128 ENUM
3129   BFD_RELOC_ARM_SBREL32
3130 ENUMDOC
3131   Data segment base relative address.
3132 ENUM
3133   BFD_RELOC_ARM_TARGET2
3134 ENUMDOC
3135   This reloc is used for references to RTTI data from exception handling
3136   tables.  The actual definition depends on the target.  It may be a
3137   pc-relative or some form of GOT-indirect relocation.
3138 ENUM
3139   BFD_RELOC_ARM_PREL31
3140 ENUMDOC
3141   31-bit PC relative address.
3142 ENUM
3143   BFD_RELOC_ARM_MOVW
3144 ENUMX
3145   BFD_RELOC_ARM_MOVT
3146 ENUMX
3147   BFD_RELOC_ARM_MOVW_PCREL
3148 ENUMX
3149   BFD_RELOC_ARM_MOVT_PCREL
3150 ENUMX
3151   BFD_RELOC_ARM_THUMB_MOVW
3152 ENUMX
3153   BFD_RELOC_ARM_THUMB_MOVT
3154 ENUMX
3155   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3156 ENUMX
3157   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3158 ENUMDOC
3159   Low and High halfword relocations for MOVW and MOVT instructions.
3160
3161 ENUM
3162   BFD_RELOC_ARM_JUMP_SLOT
3163 ENUMX
3164   BFD_RELOC_ARM_GLOB_DAT
3165 ENUMX
3166   BFD_RELOC_ARM_GOT32
3167 ENUMX
3168   BFD_RELOC_ARM_PLT32
3169 ENUMX
3170   BFD_RELOC_ARM_RELATIVE
3171 ENUMX
3172   BFD_RELOC_ARM_GOTOFF
3173 ENUMX
3174   BFD_RELOC_ARM_GOTPC
3175 ENUMX
3176   BFD_RELOC_ARM_GOT_PREL
3177 ENUMDOC
3178   Relocations for setting up GOTs and PLTs for shared libraries.
3179
3180 ENUM
3181   BFD_RELOC_ARM_TLS_GD32
3182 ENUMX
3183   BFD_RELOC_ARM_TLS_LDO32
3184 ENUMX
3185   BFD_RELOC_ARM_TLS_LDM32
3186 ENUMX
3187   BFD_RELOC_ARM_TLS_DTPOFF32
3188 ENUMX
3189   BFD_RELOC_ARM_TLS_DTPMOD32
3190 ENUMX
3191   BFD_RELOC_ARM_TLS_TPOFF32
3192 ENUMX
3193   BFD_RELOC_ARM_TLS_IE32
3194 ENUMX
3195   BFD_RELOC_ARM_TLS_LE32
3196 ENUMX
3197   BFD_RELOC_ARM_TLS_GOTDESC
3198 ENUMX
3199   BFD_RELOC_ARM_TLS_CALL
3200 ENUMX
3201   BFD_RELOC_ARM_THM_TLS_CALL
3202 ENUMX
3203   BFD_RELOC_ARM_TLS_DESCSEQ
3204 ENUMX
3205   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3206 ENUMX
3207   BFD_RELOC_ARM_TLS_DESC
3208 ENUMDOC
3209   ARM thread-local storage relocations.
3210
3211 ENUM
3212   BFD_RELOC_ARM_ALU_PC_G0_NC
3213 ENUMX
3214   BFD_RELOC_ARM_ALU_PC_G0
3215 ENUMX
3216   BFD_RELOC_ARM_ALU_PC_G1_NC
3217 ENUMX
3218   BFD_RELOC_ARM_ALU_PC_G1
3219 ENUMX
3220   BFD_RELOC_ARM_ALU_PC_G2
3221 ENUMX
3222   BFD_RELOC_ARM_LDR_PC_G0
3223 ENUMX
3224   BFD_RELOC_ARM_LDR_PC_G1
3225 ENUMX
3226   BFD_RELOC_ARM_LDR_PC_G2
3227 ENUMX
3228   BFD_RELOC_ARM_LDRS_PC_G0
3229 ENUMX
3230   BFD_RELOC_ARM_LDRS_PC_G1
3231 ENUMX
3232   BFD_RELOC_ARM_LDRS_PC_G2
3233 ENUMX
3234   BFD_RELOC_ARM_LDC_PC_G0
3235 ENUMX
3236   BFD_RELOC_ARM_LDC_PC_G1
3237 ENUMX
3238   BFD_RELOC_ARM_LDC_PC_G2
3239 ENUMX
3240   BFD_RELOC_ARM_ALU_SB_G0_NC
3241 ENUMX
3242   BFD_RELOC_ARM_ALU_SB_G0
3243 ENUMX
3244   BFD_RELOC_ARM_ALU_SB_G1_NC
3245 ENUMX
3246   BFD_RELOC_ARM_ALU_SB_G1
3247 ENUMX
3248   BFD_RELOC_ARM_ALU_SB_G2
3249 ENUMX
3250   BFD_RELOC_ARM_LDR_SB_G0
3251 ENUMX
3252   BFD_RELOC_ARM_LDR_SB_G1
3253 ENUMX
3254   BFD_RELOC_ARM_LDR_SB_G2
3255 ENUMX
3256   BFD_RELOC_ARM_LDRS_SB_G0
3257 ENUMX
3258   BFD_RELOC_ARM_LDRS_SB_G1
3259 ENUMX
3260   BFD_RELOC_ARM_LDRS_SB_G2
3261 ENUMX
3262   BFD_RELOC_ARM_LDC_SB_G0
3263 ENUMX
3264   BFD_RELOC_ARM_LDC_SB_G1
3265 ENUMX
3266   BFD_RELOC_ARM_LDC_SB_G2
3267 ENUMDOC
3268   ARM group relocations.
3269
3270 ENUM
3271   BFD_RELOC_ARM_V4BX
3272 ENUMDOC
3273   Annotation of BX instructions.
3274
3275 ENUM
3276   BFD_RELOC_ARM_IRELATIVE
3277 ENUMDOC
3278   ARM support for STT_GNU_IFUNC.
3279
3280 ENUM
3281   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3282 ENUMX
3283   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3284 ENUMX
3285   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3286 ENUMX
3287   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3288 ENUMDOC
3289   Thumb1 relocations to support execute-only code.
3290
3291 ENUM
3292   BFD_RELOC_ARM_IMMEDIATE
3293 ENUMX
3294   BFD_RELOC_ARM_ADRL_IMMEDIATE
3295 ENUMX
3296   BFD_RELOC_ARM_T32_IMMEDIATE
3297 ENUMX
3298   BFD_RELOC_ARM_T32_ADD_IMM
3299 ENUMX
3300   BFD_RELOC_ARM_T32_IMM12
3301 ENUMX
3302   BFD_RELOC_ARM_T32_ADD_PC12
3303 ENUMX
3304   BFD_RELOC_ARM_SHIFT_IMM
3305 ENUMX
3306   BFD_RELOC_ARM_SMC
3307 ENUMX
3308   BFD_RELOC_ARM_HVC
3309 ENUMX
3310   BFD_RELOC_ARM_SWI
3311 ENUMX
3312   BFD_RELOC_ARM_MULTI
3313 ENUMX
3314   BFD_RELOC_ARM_CP_OFF_IMM
3315 ENUMX
3316   BFD_RELOC_ARM_CP_OFF_IMM_S2
3317 ENUMX
3318   BFD_RELOC_ARM_T32_CP_OFF_IMM
3319 ENUMX
3320   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3321 ENUMX
3322   BFD_RELOC_ARM_ADR_IMM
3323 ENUMX
3324   BFD_RELOC_ARM_LDR_IMM
3325 ENUMX
3326   BFD_RELOC_ARM_LITERAL
3327 ENUMX
3328   BFD_RELOC_ARM_IN_POOL
3329 ENUMX
3330   BFD_RELOC_ARM_OFFSET_IMM8
3331 ENUMX
3332   BFD_RELOC_ARM_T32_OFFSET_U8
3333 ENUMX
3334   BFD_RELOC_ARM_T32_OFFSET_IMM
3335 ENUMX
3336   BFD_RELOC_ARM_HWLITERAL
3337 ENUMX
3338   BFD_RELOC_ARM_THUMB_ADD
3339 ENUMX
3340   BFD_RELOC_ARM_THUMB_IMM
3341 ENUMX
3342   BFD_RELOC_ARM_THUMB_SHIFT
3343 ENUMDOC
3344   These relocs are only used within the ARM assembler.  They are not
3345   (at present) written to any object files.
3346
3347 ENUM
3348   BFD_RELOC_SH_PCDISP8BY2
3349 ENUMX
3350   BFD_RELOC_SH_PCDISP12BY2
3351 ENUMX
3352   BFD_RELOC_SH_IMM3
3353 ENUMX
3354   BFD_RELOC_SH_IMM3U
3355 ENUMX
3356   BFD_RELOC_SH_DISP12
3357 ENUMX
3358   BFD_RELOC_SH_DISP12BY2
3359 ENUMX
3360   BFD_RELOC_SH_DISP12BY4
3361 ENUMX
3362   BFD_RELOC_SH_DISP12BY8
3363 ENUMX
3364   BFD_RELOC_SH_DISP20
3365 ENUMX
3366   BFD_RELOC_SH_DISP20BY8
3367 ENUMX
3368   BFD_RELOC_SH_IMM4
3369 ENUMX
3370   BFD_RELOC_SH_IMM4BY2
3371 ENUMX
3372   BFD_RELOC_SH_IMM4BY4
3373 ENUMX
3374   BFD_RELOC_SH_IMM8
3375 ENUMX
3376   BFD_RELOC_SH_IMM8BY2
3377 ENUMX
3378   BFD_RELOC_SH_IMM8BY4
3379 ENUMX
3380   BFD_RELOC_SH_PCRELIMM8BY2
3381 ENUMX
3382   BFD_RELOC_SH_PCRELIMM8BY4
3383 ENUMX
3384   BFD_RELOC_SH_SWITCH16
3385 ENUMX
3386   BFD_RELOC_SH_SWITCH32
3387 ENUMX
3388   BFD_RELOC_SH_USES
3389 ENUMX
3390   BFD_RELOC_SH_COUNT
3391 ENUMX
3392   BFD_RELOC_SH_ALIGN
3393 ENUMX
3394   BFD_RELOC_SH_CODE
3395 ENUMX
3396   BFD_RELOC_SH_DATA
3397 ENUMX
3398   BFD_RELOC_SH_LABEL
3399 ENUMX
3400   BFD_RELOC_SH_LOOP_START
3401 ENUMX
3402   BFD_RELOC_SH_LOOP_END
3403 ENUMX
3404   BFD_RELOC_SH_COPY
3405 ENUMX
3406   BFD_RELOC_SH_GLOB_DAT
3407 ENUMX
3408   BFD_RELOC_SH_JMP_SLOT
3409 ENUMX
3410   BFD_RELOC_SH_RELATIVE
3411 ENUMX
3412   BFD_RELOC_SH_GOTPC
3413 ENUMX
3414   BFD_RELOC_SH_GOT_LOW16
3415 ENUMX
3416   BFD_RELOC_SH_GOT_MEDLOW16
3417 ENUMX
3418   BFD_RELOC_SH_GOT_MEDHI16
3419 ENUMX
3420   BFD_RELOC_SH_GOT_HI16
3421 ENUMX
3422   BFD_RELOC_SH_GOTPLT_LOW16
3423 ENUMX
3424   BFD_RELOC_SH_GOTPLT_MEDLOW16
3425 ENUMX
3426   BFD_RELOC_SH_GOTPLT_MEDHI16
3427 ENUMX
3428   BFD_RELOC_SH_GOTPLT_HI16
3429 ENUMX
3430   BFD_RELOC_SH_PLT_LOW16
3431 ENUMX
3432   BFD_RELOC_SH_PLT_MEDLOW16
3433 ENUMX
3434   BFD_RELOC_SH_PLT_MEDHI16
3435 ENUMX
3436   BFD_RELOC_SH_PLT_HI16
3437 ENUMX
3438   BFD_RELOC_SH_GOTOFF_LOW16
3439 ENUMX
3440   BFD_RELOC_SH_GOTOFF_MEDLOW16
3441 ENUMX
3442   BFD_RELOC_SH_GOTOFF_MEDHI16
3443 ENUMX
3444   BFD_RELOC_SH_GOTOFF_HI16
3445 ENUMX
3446   BFD_RELOC_SH_GOTPC_LOW16
3447 ENUMX
3448   BFD_RELOC_SH_GOTPC_MEDLOW16
3449 ENUMX
3450   BFD_RELOC_SH_GOTPC_MEDHI16
3451 ENUMX
3452   BFD_RELOC_SH_GOTPC_HI16
3453 ENUMX
3454   BFD_RELOC_SH_COPY64
3455 ENUMX
3456   BFD_RELOC_SH_GLOB_DAT64
3457 ENUMX
3458   BFD_RELOC_SH_JMP_SLOT64
3459 ENUMX
3460   BFD_RELOC_SH_RELATIVE64
3461 ENUMX
3462   BFD_RELOC_SH_GOT10BY4
3463 ENUMX
3464   BFD_RELOC_SH_GOT10BY8
3465 ENUMX
3466   BFD_RELOC_SH_GOTPLT10BY4
3467 ENUMX
3468   BFD_RELOC_SH_GOTPLT10BY8
3469 ENUMX
3470   BFD_RELOC_SH_GOTPLT32
3471 ENUMX
3472   BFD_RELOC_SH_SHMEDIA_CODE
3473 ENUMX
3474   BFD_RELOC_SH_IMMU5
3475 ENUMX
3476   BFD_RELOC_SH_IMMS6
3477 ENUMX
3478   BFD_RELOC_SH_IMMS6BY32
3479 ENUMX
3480   BFD_RELOC_SH_IMMU6
3481 ENUMX
3482   BFD_RELOC_SH_IMMS10
3483 ENUMX
3484   BFD_RELOC_SH_IMMS10BY2
3485 ENUMX
3486   BFD_RELOC_SH_IMMS10BY4
3487 ENUMX
3488   BFD_RELOC_SH_IMMS10BY8
3489 ENUMX
3490   BFD_RELOC_SH_IMMS16
3491 ENUMX
3492   BFD_RELOC_SH_IMMU16
3493 ENUMX
3494   BFD_RELOC_SH_IMM_LOW16
3495 ENUMX
3496   BFD_RELOC_SH_IMM_LOW16_PCREL
3497 ENUMX
3498   BFD_RELOC_SH_IMM_MEDLOW16
3499 ENUMX
3500   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3501 ENUMX
3502   BFD_RELOC_SH_IMM_MEDHI16
3503 ENUMX
3504   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3505 ENUMX
3506   BFD_RELOC_SH_IMM_HI16
3507 ENUMX
3508   BFD_RELOC_SH_IMM_HI16_PCREL
3509 ENUMX
3510   BFD_RELOC_SH_PT_16
3511 ENUMX
3512   BFD_RELOC_SH_TLS_GD_32
3513 ENUMX
3514   BFD_RELOC_SH_TLS_LD_32
3515 ENUMX
3516   BFD_RELOC_SH_TLS_LDO_32
3517 ENUMX
3518   BFD_RELOC_SH_TLS_IE_32
3519 ENUMX
3520   BFD_RELOC_SH_TLS_LE_32
3521 ENUMX
3522   BFD_RELOC_SH_TLS_DTPMOD32
3523 ENUMX
3524   BFD_RELOC_SH_TLS_DTPOFF32
3525 ENUMX
3526   BFD_RELOC_SH_TLS_TPOFF32
3527 ENUMX
3528   BFD_RELOC_SH_GOT20
3529 ENUMX
3530   BFD_RELOC_SH_GOTOFF20
3531 ENUMX
3532   BFD_RELOC_SH_GOTFUNCDESC
3533 ENUMX
3534   BFD_RELOC_SH_GOTFUNCDESC20
3535 ENUMX
3536   BFD_RELOC_SH_GOTOFFFUNCDESC
3537 ENUMX
3538   BFD_RELOC_SH_GOTOFFFUNCDESC20
3539 ENUMX
3540   BFD_RELOC_SH_FUNCDESC
3541 ENUMDOC
3542   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3543
3544 ENUM
3545   BFD_RELOC_ARC_NONE
3546 ENUMX
3547   BFD_RELOC_ARC_8
3548 ENUMX
3549   BFD_RELOC_ARC_16
3550 ENUMX
3551   BFD_RELOC_ARC_24
3552 ENUMX
3553   BFD_RELOC_ARC_32
3554 ENUMX
3555   BFD_RELOC_ARC_N8
3556 ENUMX
3557   BFD_RELOC_ARC_N16
3558 ENUMX
3559   BFD_RELOC_ARC_N24
3560 ENUMX
3561   BFD_RELOC_ARC_N32
3562 ENUMX
3563   BFD_RELOC_ARC_SDA
3564 ENUMX
3565   BFD_RELOC_ARC_SECTOFF
3566 ENUMX
3567   BFD_RELOC_ARC_S21H_PCREL
3568 ENUMX
3569   BFD_RELOC_ARC_S21W_PCREL
3570 ENUMX
3571   BFD_RELOC_ARC_S25H_PCREL
3572 ENUMX
3573   BFD_RELOC_ARC_S25W_PCREL
3574 ENUMX
3575   BFD_RELOC_ARC_SDA32
3576 ENUMX
3577   BFD_RELOC_ARC_SDA_LDST
3578 ENUMX
3579   BFD_RELOC_ARC_SDA_LDST1
3580 ENUMX
3581   BFD_RELOC_ARC_SDA_LDST2
3582 ENUMX
3583   BFD_RELOC_ARC_SDA16_LD
3584 ENUMX
3585   BFD_RELOC_ARC_SDA16_LD1
3586 ENUMX
3587   BFD_RELOC_ARC_SDA16_LD2
3588 ENUMX
3589   BFD_RELOC_ARC_S13_PCREL
3590 ENUMX
3591   BFD_RELOC_ARC_W
3592 ENUMX
3593   BFD_RELOC_ARC_32_ME
3594 ENUMX
3595   BFD_RELOC_ARC_32_ME_S
3596 ENUMX
3597   BFD_RELOC_ARC_N32_ME
3598 ENUMX
3599   BFD_RELOC_ARC_SECTOFF_ME
3600 ENUMX
3601   BFD_RELOC_ARC_SDA32_ME
3602 ENUMX
3603   BFD_RELOC_ARC_W_ME
3604 ENUMX
3605   BFD_RELOC_AC_SECTOFF_U8
3606 ENUMX
3607   BFD_RELOC_AC_SECTOFF_U8_1
3608 ENUMX
3609   BFD_RELOC_AC_SECTOFF_U8_2
3610 ENUMX
3611   BFD_RELOC_AC_SECTFOFF_S9
3612 ENUMX
3613   BFD_RELOC_AC_SECTFOFF_S9_1
3614 ENUMX
3615   BFD_RELOC_AC_SECTFOFF_S9_2
3616 ENUMX
3617   BFD_RELOC_ARC_SECTOFF_ME_1
3618 ENUMX
3619   BFD_RELOC_ARC_SECTOFF_ME_2
3620 ENUMX
3621   BFD_RELOC_ARC_SECTOFF_1
3622 ENUMX
3623   BFD_RELOC_ARC_SECTOFF_2
3624 ENUMX
3625   BFD_RELOC_ARC_SDA16_ST2
3626 ENUMX
3627   BFD_RELOC_ARC_32_PCREL
3628 ENUMX
3629   BFD_RELOC_ARC_PC32
3630 ENUMX
3631   BFD_RELOC_ARC_GOT32
3632 ENUMX
3633   BFD_RELOC_ARC_GOTPC32
3634 ENUMX
3635   BFD_RELOC_ARC_PLT32
3636 ENUMX
3637   BFD_RELOC_ARC_COPY
3638 ENUMX
3639   BFD_RELOC_ARC_GLOB_DAT
3640 ENUMX
3641   BFD_RELOC_ARC_JMP_SLOT
3642 ENUMX
3643   BFD_RELOC_ARC_RELATIVE
3644 ENUMX
3645   BFD_RELOC_ARC_GOTOFF
3646 ENUMX
3647   BFD_RELOC_ARC_GOTPC
3648 ENUMX
3649   BFD_RELOC_ARC_S21W_PCREL_PLT
3650 ENUMX
3651   BFD_RELOC_ARC_S25H_PCREL_PLT
3652 ENUMX
3653   BFD_RELOC_ARC_TLS_DTPMOD
3654 ENUMX
3655   BFD_RELOC_ARC_TLS_TPOFF
3656 ENUMX
3657   BFD_RELOC_ARC_TLS_GD_GOT
3658 ENUMX
3659   BFD_RELOC_ARC_TLS_GD_LD
3660 ENUMX
3661   BFD_RELOC_ARC_TLS_GD_CALL
3662 ENUMX
3663   BFD_RELOC_ARC_TLS_IE_GOT
3664 ENUMX
3665   BFD_RELOC_ARC_TLS_DTPOFF
3666 ENUMX
3667   BFD_RELOC_ARC_TLS_DTPOFF_S9
3668 ENUMX
3669   BFD_RELOC_ARC_TLS_LE_S9
3670 ENUMX
3671   BFD_RELOC_ARC_TLS_LE_32
3672 ENUMX
3673   BFD_RELOC_ARC_S25W_PCREL_PLT
3674 ENUMX
3675   BFD_RELOC_ARC_S21H_PCREL_PLT
3676 ENUMX
3677   BFD_RELOC_ARC_NPS_CMEM16
3678 ENUMDOC
3679   ARC relocs.
3680
3681 ENUM
3682   BFD_RELOC_BFIN_16_IMM
3683 ENUMDOC
3684   ADI Blackfin 16 bit immediate absolute reloc.
3685 ENUM
3686   BFD_RELOC_BFIN_16_HIGH
3687 ENUMDOC
3688   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3689 ENUM
3690   BFD_RELOC_BFIN_4_PCREL
3691 ENUMDOC
3692   ADI Blackfin 'a' part of LSETUP.
3693 ENUM
3694   BFD_RELOC_BFIN_5_PCREL
3695 ENUMDOC
3696   ADI Blackfin.
3697 ENUM
3698   BFD_RELOC_BFIN_16_LOW
3699 ENUMDOC
3700   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3701 ENUM
3702   BFD_RELOC_BFIN_10_PCREL
3703 ENUMDOC
3704   ADI Blackfin.
3705 ENUM
3706   BFD_RELOC_BFIN_11_PCREL
3707 ENUMDOC
3708   ADI Blackfin 'b' part of LSETUP.
3709 ENUM
3710   BFD_RELOC_BFIN_12_PCREL_JUMP
3711 ENUMDOC
3712   ADI Blackfin.
3713 ENUM
3714   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3715 ENUMDOC
3716   ADI Blackfin Short jump, pcrel.
3717 ENUM
3718   BFD_RELOC_BFIN_24_PCREL_CALL_X
3719 ENUMDOC
3720   ADI Blackfin Call.x not implemented.
3721 ENUM
3722   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3723 ENUMDOC
3724   ADI Blackfin Long Jump pcrel.
3725 ENUM
3726   BFD_RELOC_BFIN_GOT17M4
3727 ENUMX
3728   BFD_RELOC_BFIN_GOTHI
3729 ENUMX
3730   BFD_RELOC_BFIN_GOTLO
3731 ENUMX
3732   BFD_RELOC_BFIN_FUNCDESC
3733 ENUMX
3734   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3735 ENUMX
3736   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3737 ENUMX
3738   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3739 ENUMX
3740   BFD_RELOC_BFIN_FUNCDESC_VALUE
3741 ENUMX
3742   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3743 ENUMX
3744   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3745 ENUMX
3746   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3747 ENUMX
3748   BFD_RELOC_BFIN_GOTOFF17M4
3749 ENUMX
3750   BFD_RELOC_BFIN_GOTOFFHI
3751 ENUMX
3752   BFD_RELOC_BFIN_GOTOFFLO
3753 ENUMDOC
3754   ADI Blackfin FD-PIC relocations.
3755 ENUM
3756   BFD_RELOC_BFIN_GOT
3757 ENUMDOC
3758   ADI Blackfin GOT relocation.
3759 ENUM
3760   BFD_RELOC_BFIN_PLTPC
3761 ENUMDOC
3762   ADI Blackfin PLTPC relocation.
3763 ENUM
3764   BFD_ARELOC_BFIN_PUSH
3765 ENUMDOC
3766   ADI Blackfin arithmetic relocation.
3767 ENUM
3768   BFD_ARELOC_BFIN_CONST
3769 ENUMDOC
3770   ADI Blackfin arithmetic relocation.
3771 ENUM
3772   BFD_ARELOC_BFIN_ADD
3773 ENUMDOC
3774   ADI Blackfin arithmetic relocation.
3775 ENUM
3776   BFD_ARELOC_BFIN_SUB
3777 ENUMDOC
3778   ADI Blackfin arithmetic relocation.
3779 ENUM
3780   BFD_ARELOC_BFIN_MULT
3781 ENUMDOC
3782   ADI Blackfin arithmetic relocation.
3783 ENUM
3784   BFD_ARELOC_BFIN_DIV
3785 ENUMDOC
3786   ADI Blackfin arithmetic relocation.
3787 ENUM
3788   BFD_ARELOC_BFIN_MOD
3789 ENUMDOC
3790   ADI Blackfin arithmetic relocation.
3791 ENUM
3792   BFD_ARELOC_BFIN_LSHIFT
3793 ENUMDOC
3794   ADI Blackfin arithmetic relocation.
3795 ENUM
3796   BFD_ARELOC_BFIN_RSHIFT
3797 ENUMDOC
3798   ADI Blackfin arithmetic relocation.
3799 ENUM
3800   BFD_ARELOC_BFIN_AND
3801 ENUMDOC
3802   ADI Blackfin arithmetic relocation.
3803 ENUM
3804   BFD_ARELOC_BFIN_OR
3805 ENUMDOC
3806   ADI Blackfin arithmetic relocation.
3807 ENUM
3808   BFD_ARELOC_BFIN_XOR
3809 ENUMDOC
3810   ADI Blackfin arithmetic relocation.
3811 ENUM
3812   BFD_ARELOC_BFIN_LAND
3813 ENUMDOC
3814   ADI Blackfin arithmetic relocation.
3815 ENUM
3816   BFD_ARELOC_BFIN_LOR
3817 ENUMDOC
3818   ADI Blackfin arithmetic relocation.
3819 ENUM
3820   BFD_ARELOC_BFIN_LEN
3821 ENUMDOC
3822   ADI Blackfin arithmetic relocation.
3823 ENUM
3824   BFD_ARELOC_BFIN_NEG
3825 ENUMDOC
3826   ADI Blackfin arithmetic relocation.
3827 ENUM
3828   BFD_ARELOC_BFIN_COMP
3829 ENUMDOC
3830   ADI Blackfin arithmetic relocation.
3831 ENUM
3832   BFD_ARELOC_BFIN_PAGE
3833 ENUMDOC
3834   ADI Blackfin arithmetic relocation.
3835 ENUM
3836   BFD_ARELOC_BFIN_HWPAGE
3837 ENUMDOC
3838   ADI Blackfin arithmetic relocation.
3839 ENUM
3840   BFD_ARELOC_BFIN_ADDR
3841 ENUMDOC
3842   ADI Blackfin arithmetic relocation.
3843
3844 ENUM
3845   BFD_RELOC_D10V_10_PCREL_R
3846 ENUMDOC
3847   Mitsubishi D10V relocs.
3848   This is a 10-bit reloc with the right 2 bits
3849   assumed to be 0.
3850 ENUM
3851   BFD_RELOC_D10V_10_PCREL_L
3852 ENUMDOC
3853   Mitsubishi D10V relocs.
3854   This is a 10-bit reloc with the right 2 bits
3855   assumed to be 0.  This is the same as the previous reloc
3856   except it is in the left container, i.e.,
3857   shifted left 15 bits.
3858 ENUM
3859   BFD_RELOC_D10V_18
3860 ENUMDOC
3861   This is an 18-bit reloc with the right 2 bits
3862   assumed to be 0.
3863 ENUM
3864   BFD_RELOC_D10V_18_PCREL
3865 ENUMDOC
3866   This is an 18-bit reloc with the right 2 bits
3867   assumed to be 0.
3868
3869 ENUM
3870   BFD_RELOC_D30V_6
3871 ENUMDOC
3872   Mitsubishi D30V relocs.
3873   This is a 6-bit absolute reloc.
3874 ENUM
3875   BFD_RELOC_D30V_9_PCREL
3876 ENUMDOC
3877   This is a 6-bit pc-relative reloc with
3878   the right 3 bits assumed to be 0.
3879 ENUM
3880   BFD_RELOC_D30V_9_PCREL_R
3881 ENUMDOC
3882   This is a 6-bit pc-relative reloc with
3883   the right 3 bits assumed to be 0. Same
3884   as the previous reloc but on the right side
3885   of the container.
3886 ENUM
3887   BFD_RELOC_D30V_15
3888 ENUMDOC
3889   This is a 12-bit absolute reloc with the
3890   right 3 bitsassumed to be 0.
3891 ENUM
3892   BFD_RELOC_D30V_15_PCREL
3893 ENUMDOC
3894   This is a 12-bit pc-relative reloc with
3895   the right 3 bits assumed to be 0.
3896 ENUM
3897   BFD_RELOC_D30V_15_PCREL_R
3898 ENUMDOC
3899   This is a 12-bit pc-relative reloc with
3900   the right 3 bits assumed to be 0. Same
3901   as the previous reloc but on the right side
3902   of the container.
3903 ENUM
3904   BFD_RELOC_D30V_21
3905 ENUMDOC
3906   This is an 18-bit absolute reloc with
3907   the right 3 bits assumed to be 0.
3908 ENUM
3909   BFD_RELOC_D30V_21_PCREL
3910 ENUMDOC
3911   This is an 18-bit pc-relative reloc with
3912   the right 3 bits assumed to be 0.
3913 ENUM
3914   BFD_RELOC_D30V_21_PCREL_R
3915 ENUMDOC
3916   This is an 18-bit pc-relative reloc with
3917   the right 3 bits assumed to be 0. Same
3918   as the previous reloc but on the right side
3919   of the container.
3920 ENUM
3921   BFD_RELOC_D30V_32
3922 ENUMDOC
3923   This is a 32-bit absolute reloc.
3924 ENUM
3925   BFD_RELOC_D30V_32_PCREL
3926 ENUMDOC
3927   This is a 32-bit pc-relative reloc.
3928
3929 ENUM
3930   BFD_RELOC_DLX_HI16_S
3931 ENUMDOC
3932   DLX relocs
3933 ENUM
3934   BFD_RELOC_DLX_LO16
3935 ENUMDOC
3936   DLX relocs
3937 ENUM
3938   BFD_RELOC_DLX_JMP26
3939 ENUMDOC
3940   DLX relocs
3941
3942 ENUM
3943   BFD_RELOC_M32C_HI8
3944 ENUMX
3945   BFD_RELOC_M32C_RL_JUMP
3946 ENUMX
3947   BFD_RELOC_M32C_RL_1ADDR
3948 ENUMX
3949   BFD_RELOC_M32C_RL_2ADDR
3950 ENUMDOC
3951   Renesas M16C/M32C Relocations.
3952
3953 ENUM
3954   BFD_RELOC_M32R_24
3955 ENUMDOC
3956   Renesas M32R (formerly Mitsubishi M32R) relocs.
3957   This is a 24 bit absolute address.
3958 ENUM
3959   BFD_RELOC_M32R_10_PCREL
3960 ENUMDOC
3961   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3962 ENUM
3963   BFD_RELOC_M32R_18_PCREL
3964 ENUMDOC
3965   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3966 ENUM
3967   BFD_RELOC_M32R_26_PCREL
3968 ENUMDOC
3969   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3970 ENUM
3971   BFD_RELOC_M32R_HI16_ULO
3972 ENUMDOC
3973   This is a 16-bit reloc containing the high 16 bits of an address
3974   used when the lower 16 bits are treated as unsigned.
3975 ENUM
3976   BFD_RELOC_M32R_HI16_SLO
3977 ENUMDOC
3978   This is a 16-bit reloc containing the high 16 bits of an address
3979   used when the lower 16 bits are treated as signed.
3980 ENUM
3981   BFD_RELOC_M32R_LO16
3982 ENUMDOC
3983   This is a 16-bit reloc containing the lower 16 bits of an address.
3984 ENUM
3985   BFD_RELOC_M32R_SDA16
3986 ENUMDOC
3987   This is a 16-bit reloc containing the small data area offset for use in
3988   add3, load, and store instructions.
3989 ENUM
3990   BFD_RELOC_M32R_GOT24
3991 ENUMX
3992   BFD_RELOC_M32R_26_PLTREL
3993 ENUMX
3994   BFD_RELOC_M32R_COPY
3995 ENUMX
3996   BFD_RELOC_M32R_GLOB_DAT
3997 ENUMX
3998   BFD_RELOC_M32R_JMP_SLOT
3999 ENUMX
4000   BFD_RELOC_M32R_RELATIVE
4001 ENUMX
4002   BFD_RELOC_M32R_GOTOFF
4003 ENUMX
4004   BFD_RELOC_M32R_GOTOFF_HI_ULO
4005 ENUMX
4006   BFD_RELOC_M32R_GOTOFF_HI_SLO
4007 ENUMX
4008   BFD_RELOC_M32R_GOTOFF_LO
4009 ENUMX
4010   BFD_RELOC_M32R_GOTPC24
4011 ENUMX
4012   BFD_RELOC_M32R_GOT16_HI_ULO
4013 ENUMX
4014   BFD_RELOC_M32R_GOT16_HI_SLO
4015 ENUMX
4016   BFD_RELOC_M32R_GOT16_LO
4017 ENUMX
4018   BFD_RELOC_M32R_GOTPC_HI_ULO
4019 ENUMX
4020   BFD_RELOC_M32R_GOTPC_HI_SLO
4021 ENUMX
4022   BFD_RELOC_M32R_GOTPC_LO
4023 ENUMDOC
4024   For PIC.
4025
4026
4027 ENUM
4028   BFD_RELOC_NDS32_20
4029 ENUMDOC
4030   NDS32 relocs.
4031   This is a 20 bit absolute address.
4032 ENUM
4033   BFD_RELOC_NDS32_9_PCREL
4034 ENUMDOC
4035   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4036 ENUM
4037   BFD_RELOC_NDS32_WORD_9_PCREL
4038 ENUMDOC
4039   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4040 ENUM
4041   BFD_RELOC_NDS32_15_PCREL
4042 ENUMDOC
4043   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4044 ENUM
4045   BFD_RELOC_NDS32_17_PCREL
4046 ENUMDOC
4047   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4048 ENUM
4049   BFD_RELOC_NDS32_25_PCREL
4050 ENUMDOC
4051   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4052 ENUM
4053   BFD_RELOC_NDS32_HI20
4054 ENUMDOC
4055   This is a 20-bit reloc containing the high 20 bits of an address
4056   used with the lower 12 bits
4057 ENUM
4058   BFD_RELOC_NDS32_LO12S3
4059 ENUMDOC
4060   This is a 12-bit reloc containing the lower 12 bits of an address
4061   then shift right by 3. This is used with ldi,sdi...
4062 ENUM
4063   BFD_RELOC_NDS32_LO12S2
4064 ENUMDOC
4065   This is a 12-bit reloc containing the lower 12 bits of an address
4066   then shift left by 2. This is used with lwi,swi...
4067 ENUM
4068   BFD_RELOC_NDS32_LO12S1
4069 ENUMDOC
4070   This is a 12-bit reloc containing the lower 12 bits of an address
4071   then shift left by 1. This is used with lhi,shi...
4072 ENUM
4073   BFD_RELOC_NDS32_LO12S0
4074 ENUMDOC
4075   This is a 12-bit reloc containing the lower 12 bits of an address
4076   then shift left by 0. This is used with lbisbi...
4077 ENUM
4078   BFD_RELOC_NDS32_LO12S0_ORI
4079 ENUMDOC
4080   This is a 12-bit reloc containing the lower 12 bits of an address
4081   then shift left by 0. This is only used with branch relaxations
4082 ENUM
4083   BFD_RELOC_NDS32_SDA15S3
4084 ENUMDOC
4085   This is a 15-bit reloc containing the small data area 18-bit signed offset
4086   and shift left by 3 for use in ldi, sdi...
4087 ENUM
4088   BFD_RELOC_NDS32_SDA15S2
4089 ENUMDOC
4090   This is a 15-bit reloc containing the small data area 17-bit signed offset
4091   and shift left by 2 for use in lwi, swi...
4092 ENUM
4093   BFD_RELOC_NDS32_SDA15S1
4094 ENUMDOC
4095   This is a 15-bit reloc containing the small data area 16-bit signed offset
4096   and shift left by 1 for use in lhi, shi...
4097 ENUM
4098   BFD_RELOC_NDS32_SDA15S0
4099 ENUMDOC
4100   This is a 15-bit reloc containing the small data area 15-bit signed offset
4101   and shift left by 0 for use in lbi, sbi...
4102 ENUM
4103   BFD_RELOC_NDS32_SDA16S3
4104 ENUMDOC
4105   This is a 16-bit reloc containing the small data area 16-bit signed offset
4106   and shift left by 3
4107 ENUM
4108   BFD_RELOC_NDS32_SDA17S2
4109 ENUMDOC
4110   This is a 17-bit reloc containing the small data area 17-bit signed offset
4111   and shift left by 2 for use in lwi.gp, swi.gp...
4112 ENUM
4113   BFD_RELOC_NDS32_SDA18S1
4114 ENUMDOC
4115   This is a 18-bit reloc containing the small data area 18-bit signed offset
4116   and shift left by 1 for use in lhi.gp, shi.gp...
4117 ENUM
4118   BFD_RELOC_NDS32_SDA19S0
4119 ENUMDOC
4120   This is a 19-bit reloc containing the small data area 19-bit signed offset
4121   and shift left by 0 for use in lbi.gp, sbi.gp...
4122 ENUM
4123   BFD_RELOC_NDS32_GOT20
4124 ENUMX
4125   BFD_RELOC_NDS32_9_PLTREL
4126 ENUMX
4127   BFD_RELOC_NDS32_25_PLTREL
4128 ENUMX
4129   BFD_RELOC_NDS32_COPY
4130 ENUMX
4131   BFD_RELOC_NDS32_GLOB_DAT
4132 ENUMX
4133   BFD_RELOC_NDS32_JMP_SLOT
4134 ENUMX
4135   BFD_RELOC_NDS32_RELATIVE
4136 ENUMX
4137   BFD_RELOC_NDS32_GOTOFF
4138 ENUMX
4139   BFD_RELOC_NDS32_GOTOFF_HI20
4140 ENUMX
4141   BFD_RELOC_NDS32_GOTOFF_LO12
4142 ENUMX
4143   BFD_RELOC_NDS32_GOTPC20
4144 ENUMX
4145   BFD_RELOC_NDS32_GOT_HI20
4146 ENUMX
4147   BFD_RELOC_NDS32_GOT_LO12
4148 ENUMX
4149   BFD_RELOC_NDS32_GOTPC_HI20
4150 ENUMX
4151   BFD_RELOC_NDS32_GOTPC_LO12
4152 ENUMDOC
4153   for PIC
4154 ENUM
4155   BFD_RELOC_NDS32_INSN16
4156 ENUMX
4157   BFD_RELOC_NDS32_LABEL
4158 ENUMX
4159   BFD_RELOC_NDS32_LONGCALL1
4160 ENUMX
4161   BFD_RELOC_NDS32_LONGCALL2
4162 ENUMX
4163   BFD_RELOC_NDS32_LONGCALL3
4164 ENUMX
4165   BFD_RELOC_NDS32_LONGJUMP1
4166 ENUMX
4167   BFD_RELOC_NDS32_LONGJUMP2
4168 ENUMX
4169   BFD_RELOC_NDS32_LONGJUMP3
4170 ENUMX
4171   BFD_RELOC_NDS32_LOADSTORE
4172 ENUMX
4173   BFD_RELOC_NDS32_9_FIXED
4174 ENUMX
4175   BFD_RELOC_NDS32_15_FIXED
4176 ENUMX
4177   BFD_RELOC_NDS32_17_FIXED
4178 ENUMX
4179   BFD_RELOC_NDS32_25_FIXED
4180 ENUMX
4181   BFD_RELOC_NDS32_LONGCALL4
4182 ENUMX
4183   BFD_RELOC_NDS32_LONGCALL5
4184 ENUMX
4185   BFD_RELOC_NDS32_LONGCALL6
4186 ENUMX
4187   BFD_RELOC_NDS32_LONGJUMP4
4188 ENUMX
4189   BFD_RELOC_NDS32_LONGJUMP5
4190 ENUMX
4191   BFD_RELOC_NDS32_LONGJUMP6
4192 ENUMX
4193   BFD_RELOC_NDS32_LONGJUMP7
4194 ENUMDOC
4195   for relax
4196 ENUM
4197   BFD_RELOC_NDS32_PLTREL_HI20
4198 ENUMX
4199   BFD_RELOC_NDS32_PLTREL_LO12
4200 ENUMX
4201   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4202 ENUMX
4203   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4204 ENUMDOC
4205   for PIC
4206 ENUM
4207   BFD_RELOC_NDS32_SDA12S2_DP
4208 ENUMX
4209   BFD_RELOC_NDS32_SDA12S2_SP
4210 ENUMX
4211   BFD_RELOC_NDS32_LO12S2_DP
4212 ENUMX
4213   BFD_RELOC_NDS32_LO12S2_SP
4214 ENUMDOC
4215   for floating point
4216 ENUM
4217   BFD_RELOC_NDS32_DWARF2_OP1
4218 ENUMX
4219   BFD_RELOC_NDS32_DWARF2_OP2
4220 ENUMX
4221   BFD_RELOC_NDS32_DWARF2_LEB
4222 ENUMDOC
4223   for dwarf2 debug_line.
4224 ENUM
4225   BFD_RELOC_NDS32_UPDATE_TA
4226 ENUMDOC
4227   for eliminate 16-bit instructions
4228 ENUM
4229   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4230 ENUMX
4231   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4232 ENUMX
4233   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4234 ENUMX
4235   BFD_RELOC_NDS32_GOT_LO15
4236 ENUMX
4237   BFD_RELOC_NDS32_GOT_LO19
4238 ENUMX
4239   BFD_RELOC_NDS32_GOTOFF_LO15
4240 ENUMX
4241   BFD_RELOC_NDS32_GOTOFF_LO19
4242 ENUMX
4243   BFD_RELOC_NDS32_GOT15S2
4244 ENUMX
4245   BFD_RELOC_NDS32_GOT17S2
4246 ENUMDOC
4247   for PIC object relaxation
4248 ENUM
4249   BFD_RELOC_NDS32_5
4250 ENUMDOC
4251   NDS32 relocs.
4252   This is a 5 bit absolute address.
4253 ENUM
4254   BFD_RELOC_NDS32_10_UPCREL
4255 ENUMDOC
4256   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4257 ENUM
4258   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4259 ENUMDOC
4260   If fp were omitted, fp can used as another gp.
4261 ENUM
4262   BFD_RELOC_NDS32_RELAX_ENTRY
4263 ENUMX
4264   BFD_RELOC_NDS32_GOT_SUFF
4265 ENUMX
4266   BFD_RELOC_NDS32_GOTOFF_SUFF
4267 ENUMX
4268   BFD_RELOC_NDS32_PLT_GOT_SUFF
4269 ENUMX
4270   BFD_RELOC_NDS32_MULCALL_SUFF
4271 ENUMX
4272   BFD_RELOC_NDS32_PTR
4273 ENUMX
4274   BFD_RELOC_NDS32_PTR_COUNT
4275 ENUMX
4276   BFD_RELOC_NDS32_PTR_RESOLVED
4277 ENUMX
4278   BFD_RELOC_NDS32_PLTBLOCK
4279 ENUMX
4280   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4281 ENUMX
4282   BFD_RELOC_NDS32_RELAX_REGION_END
4283 ENUMX
4284   BFD_RELOC_NDS32_MINUEND
4285 ENUMX
4286   BFD_RELOC_NDS32_SUBTRAHEND
4287 ENUMX
4288   BFD_RELOC_NDS32_DIFF8
4289 ENUMX
4290   BFD_RELOC_NDS32_DIFF16
4291 ENUMX
4292   BFD_RELOC_NDS32_DIFF32
4293 ENUMX
4294   BFD_RELOC_NDS32_DIFF_ULEB128
4295 ENUMX
4296   BFD_RELOC_NDS32_EMPTY
4297 ENUMDOC
4298   relaxation relative relocation types
4299 ENUM
4300   BFD_RELOC_NDS32_25_ABS
4301 ENUMDOC
4302   This is a 25 bit absolute address.
4303 ENUM
4304   BFD_RELOC_NDS32_DATA
4305 ENUMX
4306   BFD_RELOC_NDS32_TRAN
4307 ENUMX
4308   BFD_RELOC_NDS32_17IFC_PCREL
4309 ENUMX
4310   BFD_RELOC_NDS32_10IFCU_PCREL
4311 ENUMDOC
4312   For ex9 and ifc using.
4313 ENUM
4314   BFD_RELOC_NDS32_TPOFF
4315 ENUMX
4316   BFD_RELOC_NDS32_TLS_LE_HI20
4317 ENUMX
4318   BFD_RELOC_NDS32_TLS_LE_LO12
4319 ENUMX
4320   BFD_RELOC_NDS32_TLS_LE_ADD
4321 ENUMX
4322   BFD_RELOC_NDS32_TLS_LE_LS
4323 ENUMX
4324   BFD_RELOC_NDS32_GOTTPOFF
4325 ENUMX
4326   BFD_RELOC_NDS32_TLS_IE_HI20
4327 ENUMX
4328   BFD_RELOC_NDS32_TLS_IE_LO12S2
4329 ENUMX
4330   BFD_RELOC_NDS32_TLS_TPOFF
4331 ENUMX
4332   BFD_RELOC_NDS32_TLS_LE_20
4333 ENUMX
4334   BFD_RELOC_NDS32_TLS_LE_15S0
4335 ENUMX
4336   BFD_RELOC_NDS32_TLS_LE_15S1
4337 ENUMX
4338   BFD_RELOC_NDS32_TLS_LE_15S2
4339 ENUMDOC
4340   For TLS.
4341
4342
4343 ENUM
4344   BFD_RELOC_V850_9_PCREL
4345 ENUMDOC
4346   This is a 9-bit reloc
4347 ENUM
4348   BFD_RELOC_V850_22_PCREL
4349 ENUMDOC
4350   This is a 22-bit reloc
4351
4352 ENUM
4353   BFD_RELOC_V850_SDA_16_16_OFFSET
4354 ENUMDOC
4355   This is a 16 bit offset from the short data area pointer.
4356 ENUM
4357   BFD_RELOC_V850_SDA_15_16_OFFSET
4358 ENUMDOC
4359   This is a 16 bit offset (of which only 15 bits are used) from the
4360   short data area pointer.
4361 ENUM
4362   BFD_RELOC_V850_ZDA_16_16_OFFSET
4363 ENUMDOC
4364   This is a 16 bit offset from the zero data area pointer.
4365 ENUM
4366   BFD_RELOC_V850_ZDA_15_16_OFFSET
4367 ENUMDOC
4368   This is a 16 bit offset (of which only 15 bits are used) from the
4369   zero data area pointer.
4370 ENUM
4371   BFD_RELOC_V850_TDA_6_8_OFFSET
4372 ENUMDOC
4373   This is an 8 bit offset (of which only 6 bits are used) from the
4374   tiny data area pointer.
4375 ENUM
4376   BFD_RELOC_V850_TDA_7_8_OFFSET
4377 ENUMDOC
4378   This is an 8bit offset (of which only 7 bits are used) from the tiny
4379   data area pointer.
4380 ENUM
4381   BFD_RELOC_V850_TDA_7_7_OFFSET
4382 ENUMDOC
4383   This is a 7 bit offset from the tiny data area pointer.
4384 ENUM
4385   BFD_RELOC_V850_TDA_16_16_OFFSET
4386 ENUMDOC
4387   This is a 16 bit offset from the tiny data area pointer.
4388 COMMENT
4389 ENUM
4390   BFD_RELOC_V850_TDA_4_5_OFFSET
4391 ENUMDOC
4392   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4393   data area pointer.
4394 ENUM
4395   BFD_RELOC_V850_TDA_4_4_OFFSET
4396 ENUMDOC
4397   This is a 4 bit offset from the tiny data area pointer.
4398 ENUM
4399   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4400 ENUMDOC
4401   This is a 16 bit offset from the short data area pointer, with the
4402   bits placed non-contiguously in the instruction.
4403 ENUM
4404   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4405 ENUMDOC
4406   This is a 16 bit offset from the zero data area pointer, with the
4407   bits placed non-contiguously in the instruction.
4408 ENUM
4409   BFD_RELOC_V850_CALLT_6_7_OFFSET
4410 ENUMDOC
4411   This is a 6 bit offset from the call table base pointer.
4412 ENUM
4413   BFD_RELOC_V850_CALLT_16_16_OFFSET
4414 ENUMDOC
4415   This is a 16 bit offset from the call table base pointer.
4416 ENUM
4417   BFD_RELOC_V850_LONGCALL
4418 ENUMDOC
4419   Used for relaxing indirect function calls.
4420 ENUM
4421   BFD_RELOC_V850_LONGJUMP
4422 ENUMDOC
4423   Used for relaxing indirect jumps.
4424 ENUM
4425   BFD_RELOC_V850_ALIGN
4426 ENUMDOC
4427   Used to maintain alignment whilst relaxing.
4428 ENUM
4429   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4430 ENUMDOC
4431   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4432   instructions.
4433 ENUM
4434   BFD_RELOC_V850_16_PCREL
4435 ENUMDOC
4436   This is a 16-bit reloc.
4437 ENUM
4438   BFD_RELOC_V850_17_PCREL
4439 ENUMDOC
4440   This is a 17-bit reloc.
4441 ENUM
4442   BFD_RELOC_V850_23
4443 ENUMDOC
4444   This is a 23-bit reloc.
4445 ENUM
4446   BFD_RELOC_V850_32_PCREL
4447 ENUMDOC
4448   This is a 32-bit reloc.
4449 ENUM
4450   BFD_RELOC_V850_32_ABS
4451 ENUMDOC
4452   This is a 32-bit reloc.
4453 ENUM
4454   BFD_RELOC_V850_16_SPLIT_OFFSET
4455 ENUMDOC
4456   This is a 16-bit reloc.
4457 ENUM
4458   BFD_RELOC_V850_16_S1
4459 ENUMDOC
4460   This is a 16-bit reloc.
4461 ENUM
4462   BFD_RELOC_V850_LO16_S1
4463 ENUMDOC
4464   Low 16 bits. 16 bit shifted by 1.
4465 ENUM
4466   BFD_RELOC_V850_CALLT_15_16_OFFSET
4467 ENUMDOC
4468   This is a 16 bit offset from the call table base pointer.
4469 ENUM
4470   BFD_RELOC_V850_32_GOTPCREL
4471 ENUMDOC
4472   DSO relocations.
4473 ENUM
4474   BFD_RELOC_V850_16_GOT
4475 ENUMDOC
4476   DSO relocations.
4477 ENUM
4478   BFD_RELOC_V850_32_GOT
4479 ENUMDOC
4480   DSO relocations.
4481 ENUM
4482   BFD_RELOC_V850_22_PLT_PCREL
4483 ENUMDOC
4484   DSO relocations.
4485 ENUM
4486   BFD_RELOC_V850_32_PLT_PCREL
4487 ENUMDOC
4488   DSO relocations.
4489 ENUM
4490   BFD_RELOC_V850_COPY
4491 ENUMDOC
4492   DSO relocations.
4493 ENUM
4494   BFD_RELOC_V850_GLOB_DAT
4495 ENUMDOC
4496   DSO relocations.
4497 ENUM
4498   BFD_RELOC_V850_JMP_SLOT
4499 ENUMDOC
4500   DSO relocations.
4501 ENUM
4502   BFD_RELOC_V850_RELATIVE
4503 ENUMDOC
4504   DSO relocations.
4505 ENUM
4506   BFD_RELOC_V850_16_GOTOFF
4507 ENUMDOC
4508   DSO relocations.
4509 ENUM
4510   BFD_RELOC_V850_32_GOTOFF
4511 ENUMDOC
4512   DSO relocations.
4513 ENUM
4514   BFD_RELOC_V850_CODE
4515 ENUMDOC
4516   start code.
4517 ENUM
4518   BFD_RELOC_V850_DATA
4519 ENUMDOC
4520   start data in text.
4521
4522 ENUM
4523   BFD_RELOC_TIC30_LDP
4524 ENUMDOC
4525   This is a 8bit DP reloc for the tms320c30, where the most
4526   significant 8 bits of a 24 bit word are placed into the least
4527   significant 8 bits of the opcode.
4528
4529 ENUM
4530   BFD_RELOC_TIC54X_PARTLS7
4531 ENUMDOC
4532   This is a 7bit reloc for the tms320c54x, where the least
4533   significant 7 bits of a 16 bit word are placed into the least
4534   significant 7 bits of the opcode.
4535
4536 ENUM
4537   BFD_RELOC_TIC54X_PARTMS9
4538 ENUMDOC
4539   This is a 9bit DP reloc for the tms320c54x, where the most
4540   significant 9 bits of a 16 bit word are placed into the least
4541   significant 9 bits of the opcode.
4542
4543 ENUM
4544   BFD_RELOC_TIC54X_23
4545 ENUMDOC
4546   This is an extended address 23-bit reloc for the tms320c54x.
4547
4548 ENUM
4549   BFD_RELOC_TIC54X_16_OF_23
4550 ENUMDOC
4551   This is a 16-bit reloc for the tms320c54x, where the least
4552   significant 16 bits of a 23-bit extended address are placed into
4553   the opcode.
4554
4555 ENUM
4556   BFD_RELOC_TIC54X_MS7_OF_23
4557 ENUMDOC
4558   This is a reloc for the tms320c54x, where the most
4559   significant 7 bits of a 23-bit extended address are placed into
4560   the opcode.
4561
4562 ENUM
4563   BFD_RELOC_C6000_PCR_S21
4564 ENUMX
4565   BFD_RELOC_C6000_PCR_S12
4566 ENUMX
4567   BFD_RELOC_C6000_PCR_S10
4568 ENUMX
4569   BFD_RELOC_C6000_PCR_S7
4570 ENUMX
4571   BFD_RELOC_C6000_ABS_S16
4572 ENUMX
4573   BFD_RELOC_C6000_ABS_L16
4574 ENUMX
4575   BFD_RELOC_C6000_ABS_H16
4576 ENUMX
4577   BFD_RELOC_C6000_SBR_U15_B
4578 ENUMX
4579   BFD_RELOC_C6000_SBR_U15_H
4580 ENUMX
4581   BFD_RELOC_C6000_SBR_U15_W
4582 ENUMX
4583   BFD_RELOC_C6000_SBR_S16
4584 ENUMX
4585   BFD_RELOC_C6000_SBR_L16_B
4586 ENUMX
4587   BFD_RELOC_C6000_SBR_L16_H
4588 ENUMX
4589   BFD_RELOC_C6000_SBR_L16_W
4590 ENUMX
4591   BFD_RELOC_C6000_SBR_H16_B
4592 ENUMX
4593   BFD_RELOC_C6000_SBR_H16_H
4594 ENUMX
4595   BFD_RELOC_C6000_SBR_H16_W
4596 ENUMX
4597   BFD_RELOC_C6000_SBR_GOT_U15_W
4598 ENUMX
4599   BFD_RELOC_C6000_SBR_GOT_L16_W
4600 ENUMX
4601   BFD_RELOC_C6000_SBR_GOT_H16_W
4602 ENUMX
4603   BFD_RELOC_C6000_DSBT_INDEX
4604 ENUMX
4605   BFD_RELOC_C6000_PREL31
4606 ENUMX
4607   BFD_RELOC_C6000_COPY
4608 ENUMX
4609   BFD_RELOC_C6000_JUMP_SLOT
4610 ENUMX
4611   BFD_RELOC_C6000_EHTYPE
4612 ENUMX
4613   BFD_RELOC_C6000_PCR_H16
4614 ENUMX
4615   BFD_RELOC_C6000_PCR_L16
4616 ENUMX
4617   BFD_RELOC_C6000_ALIGN
4618 ENUMX
4619   BFD_RELOC_C6000_FPHEAD
4620 ENUMX
4621   BFD_RELOC_C6000_NOCMP
4622 ENUMDOC
4623   TMS320C6000 relocations.
4624
4625 ENUM
4626   BFD_RELOC_FR30_48
4627 ENUMDOC
4628   This is a 48 bit reloc for the FR30 that stores 32 bits.
4629 ENUM
4630   BFD_RELOC_FR30_20
4631 ENUMDOC
4632   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4633   two sections.
4634 ENUM
4635   BFD_RELOC_FR30_6_IN_4
4636 ENUMDOC
4637   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4638   4 bits.
4639 ENUM
4640   BFD_RELOC_FR30_8_IN_8
4641 ENUMDOC
4642   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4643   into 8 bits.
4644 ENUM
4645   BFD_RELOC_FR30_9_IN_8
4646 ENUMDOC
4647   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4648   into 8 bits.
4649 ENUM
4650   BFD_RELOC_FR30_10_IN_8
4651 ENUMDOC
4652   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4653   into 8 bits.
4654 ENUM
4655   BFD_RELOC_FR30_9_PCREL
4656 ENUMDOC
4657   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4658   short offset into 8 bits.
4659 ENUM
4660   BFD_RELOC_FR30_12_PCREL
4661 ENUMDOC
4662   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4663   short offset into 11 bits.
4664
4665 ENUM
4666   BFD_RELOC_MCORE_PCREL_IMM8BY4
4667 ENUMX
4668   BFD_RELOC_MCORE_PCREL_IMM11BY2
4669 ENUMX
4670   BFD_RELOC_MCORE_PCREL_IMM4BY2
4671 ENUMX
4672   BFD_RELOC_MCORE_PCREL_32
4673 ENUMX
4674   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4675 ENUMX
4676   BFD_RELOC_MCORE_RVA
4677 ENUMDOC
4678   Motorola Mcore relocations.
4679
4680 ENUM
4681   BFD_RELOC_MEP_8
4682 ENUMX
4683   BFD_RELOC_MEP_16
4684 ENUMX
4685   BFD_RELOC_MEP_32
4686 ENUMX
4687   BFD_RELOC_MEP_PCREL8A2
4688 ENUMX
4689   BFD_RELOC_MEP_PCREL12A2
4690 ENUMX
4691   BFD_RELOC_MEP_PCREL17A2
4692 ENUMX
4693   BFD_RELOC_MEP_PCREL24A2
4694 ENUMX
4695   BFD_RELOC_MEP_PCABS24A2
4696 ENUMX
4697   BFD_RELOC_MEP_LOW16
4698 ENUMX
4699   BFD_RELOC_MEP_HI16U
4700 ENUMX
4701   BFD_RELOC_MEP_HI16S
4702 ENUMX
4703   BFD_RELOC_MEP_GPREL
4704 ENUMX
4705   BFD_RELOC_MEP_TPREL
4706 ENUMX
4707   BFD_RELOC_MEP_TPREL7
4708 ENUMX
4709   BFD_RELOC_MEP_TPREL7A2
4710 ENUMX
4711   BFD_RELOC_MEP_TPREL7A4
4712 ENUMX
4713   BFD_RELOC_MEP_UIMM24
4714 ENUMX
4715   BFD_RELOC_MEP_ADDR24A4
4716 ENUMX
4717   BFD_RELOC_MEP_GNU_VTINHERIT
4718 ENUMX
4719   BFD_RELOC_MEP_GNU_VTENTRY
4720 ENUMDOC
4721   Toshiba Media Processor Relocations.
4722 COMMENT
4723
4724 ENUM
4725   BFD_RELOC_METAG_HIADDR16
4726 ENUMX
4727   BFD_RELOC_METAG_LOADDR16
4728 ENUMX
4729   BFD_RELOC_METAG_RELBRANCH
4730 ENUMX
4731   BFD_RELOC_METAG_GETSETOFF
4732 ENUMX
4733   BFD_RELOC_METAG_HIOG
4734 ENUMX
4735   BFD_RELOC_METAG_LOOG
4736 ENUMX
4737   BFD_RELOC_METAG_REL8
4738 ENUMX
4739   BFD_RELOC_METAG_REL16
4740 ENUMX
4741   BFD_RELOC_METAG_HI16_GOTOFF
4742 ENUMX
4743   BFD_RELOC_METAG_LO16_GOTOFF
4744 ENUMX
4745   BFD_RELOC_METAG_GETSET_GOTOFF
4746 ENUMX
4747   BFD_RELOC_METAG_GETSET_GOT
4748 ENUMX
4749   BFD_RELOC_METAG_HI16_GOTPC
4750 ENUMX
4751   BFD_RELOC_METAG_LO16_GOTPC
4752 ENUMX
4753   BFD_RELOC_METAG_HI16_PLT
4754 ENUMX
4755   BFD_RELOC_METAG_LO16_PLT
4756 ENUMX
4757   BFD_RELOC_METAG_RELBRANCH_PLT
4758 ENUMX
4759   BFD_RELOC_METAG_GOTOFF
4760 ENUMX
4761   BFD_RELOC_METAG_PLT
4762 ENUMX
4763   BFD_RELOC_METAG_COPY
4764 ENUMX
4765   BFD_RELOC_METAG_JMP_SLOT
4766 ENUMX
4767   BFD_RELOC_METAG_RELATIVE
4768 ENUMX
4769   BFD_RELOC_METAG_GLOB_DAT
4770 ENUMX
4771   BFD_RELOC_METAG_TLS_GD
4772 ENUMX
4773   BFD_RELOC_METAG_TLS_LDM
4774 ENUMX
4775   BFD_RELOC_METAG_TLS_LDO_HI16
4776 ENUMX
4777   BFD_RELOC_METAG_TLS_LDO_LO16
4778 ENUMX
4779   BFD_RELOC_METAG_TLS_LDO
4780 ENUMX
4781   BFD_RELOC_METAG_TLS_IE
4782 ENUMX
4783   BFD_RELOC_METAG_TLS_IENONPIC
4784 ENUMX
4785   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4786 ENUMX
4787   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4788 ENUMX
4789   BFD_RELOC_METAG_TLS_TPOFF
4790 ENUMX
4791   BFD_RELOC_METAG_TLS_DTPMOD
4792 ENUMX
4793   BFD_RELOC_METAG_TLS_DTPOFF
4794 ENUMX
4795   BFD_RELOC_METAG_TLS_LE
4796 ENUMX
4797   BFD_RELOC_METAG_TLS_LE_HI16
4798 ENUMX
4799   BFD_RELOC_METAG_TLS_LE_LO16
4800 ENUMDOC
4801   Imagination Technologies Meta relocations.
4802
4803 ENUM
4804   BFD_RELOC_MMIX_GETA
4805 ENUMX
4806   BFD_RELOC_MMIX_GETA_1
4807 ENUMX
4808   BFD_RELOC_MMIX_GETA_2
4809 ENUMX
4810   BFD_RELOC_MMIX_GETA_3
4811 ENUMDOC
4812   These are relocations for the GETA instruction.
4813 ENUM
4814   BFD_RELOC_MMIX_CBRANCH
4815 ENUMX
4816   BFD_RELOC_MMIX_CBRANCH_J
4817 ENUMX
4818   BFD_RELOC_MMIX_CBRANCH_1
4819 ENUMX
4820   BFD_RELOC_MMIX_CBRANCH_2
4821 ENUMX
4822   BFD_RELOC_MMIX_CBRANCH_3
4823 ENUMDOC
4824   These are relocations for a conditional branch instruction.
4825 ENUM
4826   BFD_RELOC_MMIX_PUSHJ
4827 ENUMX
4828   BFD_RELOC_MMIX_PUSHJ_1
4829 ENUMX
4830   BFD_RELOC_MMIX_PUSHJ_2
4831 ENUMX
4832   BFD_RELOC_MMIX_PUSHJ_3
4833 ENUMX
4834   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4835 ENUMDOC
4836   These are relocations for the PUSHJ instruction.
4837 ENUM
4838   BFD_RELOC_MMIX_JMP
4839 ENUMX
4840   BFD_RELOC_MMIX_JMP_1
4841 ENUMX
4842   BFD_RELOC_MMIX_JMP_2
4843 ENUMX
4844   BFD_RELOC_MMIX_JMP_3
4845 ENUMDOC
4846   These are relocations for the JMP instruction.
4847 ENUM
4848   BFD_RELOC_MMIX_ADDR19
4849 ENUMDOC
4850   This is a relocation for a relative address as in a GETA instruction or
4851   a branch.
4852 ENUM
4853   BFD_RELOC_MMIX_ADDR27
4854 ENUMDOC
4855   This is a relocation for a relative address as in a JMP instruction.
4856 ENUM
4857   BFD_RELOC_MMIX_REG_OR_BYTE
4858 ENUMDOC
4859   This is a relocation for an instruction field that may be a general
4860   register or a value 0..255.
4861 ENUM
4862   BFD_RELOC_MMIX_REG
4863 ENUMDOC
4864   This is a relocation for an instruction field that may be a general
4865   register.
4866 ENUM
4867   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4868 ENUMDOC
4869   This is a relocation for two instruction fields holding a register and
4870   an offset, the equivalent of the relocation.
4871 ENUM
4872   BFD_RELOC_MMIX_LOCAL
4873 ENUMDOC
4874   This relocation is an assertion that the expression is not allocated as
4875   a global register.  It does not modify contents.
4876
4877 ENUM
4878   BFD_RELOC_AVR_7_PCREL
4879 ENUMDOC
4880   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4881   short offset into 7 bits.
4882 ENUM
4883   BFD_RELOC_AVR_13_PCREL
4884 ENUMDOC
4885   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4886   short offset into 12 bits.
4887 ENUM
4888   BFD_RELOC_AVR_16_PM
4889 ENUMDOC
4890   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4891   program memory address) into 16 bits.
4892 ENUM
4893   BFD_RELOC_AVR_LO8_LDI
4894 ENUMDOC
4895   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4896   data memory address) into 8 bit immediate value of LDI insn.
4897 ENUM
4898   BFD_RELOC_AVR_HI8_LDI
4899 ENUMDOC
4900   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4901   of data memory address) into 8 bit immediate value of LDI insn.
4902 ENUM
4903   BFD_RELOC_AVR_HH8_LDI
4904 ENUMDOC
4905   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4906   of program memory address) into 8 bit immediate value of LDI insn.
4907 ENUM
4908   BFD_RELOC_AVR_MS8_LDI
4909 ENUMDOC
4910   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4911   of 32 bit value) into 8 bit immediate value of LDI insn.
4912 ENUM
4913   BFD_RELOC_AVR_LO8_LDI_NEG
4914 ENUMDOC
4915   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4916   (usually data memory address) into 8 bit immediate value of SUBI insn.
4917 ENUM
4918   BFD_RELOC_AVR_HI8_LDI_NEG
4919 ENUMDOC
4920   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4921   (high 8 bit of data memory address) into 8 bit immediate value of
4922   SUBI insn.
4923 ENUM
4924   BFD_RELOC_AVR_HH8_LDI_NEG
4925 ENUMDOC
4926   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4927   (most high 8 bit of program memory address) into 8 bit immediate value
4928   of LDI or SUBI insn.
4929 ENUM
4930   BFD_RELOC_AVR_MS8_LDI_NEG
4931 ENUMDOC
4932   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4933   of 32 bit value) into 8 bit immediate value of LDI insn.
4934 ENUM
4935   BFD_RELOC_AVR_LO8_LDI_PM
4936 ENUMDOC
4937   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4938   command address) into 8 bit immediate value of LDI insn.
4939 ENUM
4940   BFD_RELOC_AVR_LO8_LDI_GS
4941 ENUMDOC
4942   This is a 16 bit reloc for the AVR that stores 8 bit value
4943   (command address) into 8 bit immediate value of LDI insn. If the address
4944   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4945   in the lower 128k.
4946 ENUM
4947   BFD_RELOC_AVR_HI8_LDI_PM
4948 ENUMDOC
4949   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4950   of command address) into 8 bit immediate value of LDI insn.
4951 ENUM
4952   BFD_RELOC_AVR_HI8_LDI_GS
4953 ENUMDOC
4954   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4955   of command address) into 8 bit immediate value of LDI insn.  If the address
4956   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4957   below 128k.
4958 ENUM
4959   BFD_RELOC_AVR_HH8_LDI_PM
4960 ENUMDOC
4961   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4962   of command address) into 8 bit immediate value of LDI insn.
4963 ENUM
4964   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4965 ENUMDOC
4966   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4967   (usually command address) into 8 bit immediate value of SUBI insn.
4968 ENUM
4969   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4970 ENUMDOC
4971   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4972   (high 8 bit of 16 bit command address) into 8 bit immediate value
4973   of SUBI insn.
4974 ENUM
4975   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4976 ENUMDOC
4977   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4978   (high 6 bit of 22 bit command address) into 8 bit immediate
4979   value of SUBI insn.
4980 ENUM
4981   BFD_RELOC_AVR_CALL
4982 ENUMDOC
4983   This is a 32 bit reloc for the AVR that stores 23 bit value
4984   into 22 bits.
4985 ENUM
4986   BFD_RELOC_AVR_LDI
4987 ENUMDOC
4988   This is a 16 bit reloc for the AVR that stores all needed bits
4989   for absolute addressing with ldi with overflow check to linktime
4990 ENUM
4991   BFD_RELOC_AVR_6
4992 ENUMDOC
4993   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4994   instructions
4995 ENUM
4996   BFD_RELOC_AVR_6_ADIW
4997 ENUMDOC
4998   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4999   instructions
5000 ENUM
5001   BFD_RELOC_AVR_8_LO
5002 ENUMDOC
5003   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5004   in .byte lo8(symbol)
5005 ENUM
5006   BFD_RELOC_AVR_8_HI
5007 ENUMDOC
5008   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5009   in .byte hi8(symbol)
5010 ENUM
5011   BFD_RELOC_AVR_8_HLO
5012 ENUMDOC
5013   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5014   in .byte hlo8(symbol)
5015 ENUM
5016   BFD_RELOC_AVR_DIFF8
5017 ENUMX
5018   BFD_RELOC_AVR_DIFF16
5019 ENUMX
5020   BFD_RELOC_AVR_DIFF32
5021 ENUMDOC
5022   AVR relocations to mark the difference of two local symbols.
5023   These are only needed to support linker relaxation and can be ignored
5024   when not relaxing.  The field is set to the value of the difference
5025   assuming no relaxation.  The relocation encodes the position of the
5026   second symbol so the linker can determine whether to adjust the field
5027   value.
5028 ENUM
5029   BFD_RELOC_AVR_LDS_STS_16
5030 ENUMDOC
5031   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5032   lds and sts instructions supported only tiny core.
5033 ENUM
5034   BFD_RELOC_AVR_PORT6
5035 ENUMDOC
5036   This is a 6 bit reloc for the AVR that stores an I/O register
5037   number for the IN and OUT instructions
5038 ENUM
5039   BFD_RELOC_AVR_PORT5
5040 ENUMDOC
5041   This is a 5 bit reloc for the AVR that stores an I/O register
5042   number for the SBIC, SBIS, SBI and CBI instructions
5043 ENUM
5044   BFD_RELOC_RL78_NEG8
5045 ENUMX
5046   BFD_RELOC_RL78_NEG16
5047 ENUMX
5048   BFD_RELOC_RL78_NEG24
5049 ENUMX
5050   BFD_RELOC_RL78_NEG32
5051 ENUMX
5052   BFD_RELOC_RL78_16_OP
5053 ENUMX
5054   BFD_RELOC_RL78_24_OP
5055 ENUMX
5056   BFD_RELOC_RL78_32_OP
5057 ENUMX
5058   BFD_RELOC_RL78_8U
5059 ENUMX
5060   BFD_RELOC_RL78_16U
5061 ENUMX
5062   BFD_RELOC_RL78_24U
5063 ENUMX
5064   BFD_RELOC_RL78_DIR3U_PCREL
5065 ENUMX
5066   BFD_RELOC_RL78_DIFF
5067 ENUMX
5068   BFD_RELOC_RL78_GPRELB
5069 ENUMX
5070   BFD_RELOC_RL78_GPRELW
5071 ENUMX
5072   BFD_RELOC_RL78_GPRELL
5073 ENUMX
5074   BFD_RELOC_RL78_SYM
5075 ENUMX
5076   BFD_RELOC_RL78_OP_SUBTRACT
5077 ENUMX
5078   BFD_RELOC_RL78_OP_NEG
5079 ENUMX
5080   BFD_RELOC_RL78_OP_AND
5081 ENUMX
5082   BFD_RELOC_RL78_OP_SHRA
5083 ENUMX
5084   BFD_RELOC_RL78_ABS8
5085 ENUMX
5086   BFD_RELOC_RL78_ABS16
5087 ENUMX
5088   BFD_RELOC_RL78_ABS16_REV
5089 ENUMX
5090   BFD_RELOC_RL78_ABS32
5091 ENUMX
5092   BFD_RELOC_RL78_ABS32_REV
5093 ENUMX
5094   BFD_RELOC_RL78_ABS16U
5095 ENUMX
5096   BFD_RELOC_RL78_ABS16UW
5097 ENUMX
5098   BFD_RELOC_RL78_ABS16UL
5099 ENUMX
5100   BFD_RELOC_RL78_RELAX
5101 ENUMX
5102   BFD_RELOC_RL78_HI16
5103 ENUMX
5104   BFD_RELOC_RL78_HI8
5105 ENUMX
5106   BFD_RELOC_RL78_LO16
5107 ENUMX
5108   BFD_RELOC_RL78_CODE
5109 ENUMX
5110   BFD_RELOC_RL78_SADDR
5111 ENUMDOC
5112   Renesas RL78 Relocations.
5113
5114 ENUM
5115   BFD_RELOC_RX_NEG8
5116 ENUMX
5117   BFD_RELOC_RX_NEG16
5118 ENUMX
5119   BFD_RELOC_RX_NEG24
5120 ENUMX
5121   BFD_RELOC_RX_NEG32
5122 ENUMX
5123   BFD_RELOC_RX_16_OP
5124 ENUMX
5125   BFD_RELOC_RX_24_OP
5126 ENUMX
5127   BFD_RELOC_RX_32_OP
5128 ENUMX
5129   BFD_RELOC_RX_8U
5130 ENUMX
5131   BFD_RELOC_RX_16U
5132 ENUMX
5133   BFD_RELOC_RX_24U
5134 ENUMX
5135   BFD_RELOC_RX_DIR3U_PCREL
5136 ENUMX
5137   BFD_RELOC_RX_DIFF
5138 ENUMX
5139   BFD_RELOC_RX_GPRELB
5140 ENUMX
5141   BFD_RELOC_RX_GPRELW
5142 ENUMX
5143   BFD_RELOC_RX_GPRELL
5144 ENUMX
5145   BFD_RELOC_RX_SYM
5146 ENUMX
5147   BFD_RELOC_RX_OP_SUBTRACT
5148 ENUMX
5149   BFD_RELOC_RX_OP_NEG
5150 ENUMX
5151   BFD_RELOC_RX_ABS8
5152 ENUMX
5153   BFD_RELOC_RX_ABS16
5154 ENUMX
5155   BFD_RELOC_RX_ABS16_REV
5156 ENUMX
5157   BFD_RELOC_RX_ABS32
5158 ENUMX
5159   BFD_RELOC_RX_ABS32_REV
5160 ENUMX
5161   BFD_RELOC_RX_ABS16U
5162 ENUMX
5163   BFD_RELOC_RX_ABS16UW
5164 ENUMX
5165   BFD_RELOC_RX_ABS16UL
5166 ENUMX
5167   BFD_RELOC_RX_RELAX
5168 ENUMDOC
5169   Renesas RX Relocations.
5170
5171 ENUM
5172   BFD_RELOC_390_12
5173 ENUMDOC
5174    Direct 12 bit.
5175 ENUM
5176   BFD_RELOC_390_GOT12
5177 ENUMDOC
5178   12 bit GOT offset.
5179 ENUM
5180   BFD_RELOC_390_PLT32
5181 ENUMDOC
5182   32 bit PC relative PLT address.
5183 ENUM
5184   BFD_RELOC_390_COPY
5185 ENUMDOC
5186   Copy symbol at runtime.
5187 ENUM
5188   BFD_RELOC_390_GLOB_DAT
5189 ENUMDOC
5190   Create GOT entry.
5191 ENUM
5192   BFD_RELOC_390_JMP_SLOT
5193 ENUMDOC
5194   Create PLT entry.
5195 ENUM
5196   BFD_RELOC_390_RELATIVE
5197 ENUMDOC
5198   Adjust by program base.
5199 ENUM
5200   BFD_RELOC_390_GOTPC
5201 ENUMDOC
5202   32 bit PC relative offset to GOT.
5203 ENUM
5204   BFD_RELOC_390_GOT16
5205 ENUMDOC
5206   16 bit GOT offset.
5207 ENUM
5208   BFD_RELOC_390_PC12DBL
5209 ENUMDOC
5210   PC relative 12 bit shifted by 1.
5211 ENUM
5212   BFD_RELOC_390_PLT12DBL
5213 ENUMDOC
5214   12 bit PC rel. PLT shifted by 1.
5215 ENUM
5216   BFD_RELOC_390_PC16DBL
5217 ENUMDOC
5218   PC relative 16 bit shifted by 1.
5219 ENUM
5220   BFD_RELOC_390_PLT16DBL
5221 ENUMDOC
5222   16 bit PC rel. PLT shifted by 1.
5223 ENUM
5224   BFD_RELOC_390_PC24DBL
5225 ENUMDOC
5226   PC relative 24 bit shifted by 1.
5227 ENUM
5228   BFD_RELOC_390_PLT24DBL
5229 ENUMDOC
5230   24 bit PC rel. PLT shifted by 1.
5231 ENUM
5232   BFD_RELOC_390_PC32DBL
5233 ENUMDOC
5234   PC relative 32 bit shifted by 1.
5235 ENUM
5236   BFD_RELOC_390_PLT32DBL
5237 ENUMDOC
5238   32 bit PC rel. PLT shifted by 1.
5239 ENUM
5240   BFD_RELOC_390_GOTPCDBL
5241 ENUMDOC
5242   32 bit PC rel. GOT shifted by 1.
5243 ENUM
5244   BFD_RELOC_390_GOT64
5245 ENUMDOC
5246   64 bit GOT offset.
5247 ENUM
5248   BFD_RELOC_390_PLT64
5249 ENUMDOC
5250   64 bit PC relative PLT address.
5251 ENUM
5252   BFD_RELOC_390_GOTENT
5253 ENUMDOC
5254   32 bit rel. offset to GOT entry.
5255 ENUM
5256   BFD_RELOC_390_GOTOFF64
5257 ENUMDOC
5258   64 bit offset to GOT.
5259 ENUM
5260   BFD_RELOC_390_GOTPLT12
5261 ENUMDOC
5262   12-bit offset to symbol-entry within GOT, with PLT handling.
5263 ENUM
5264   BFD_RELOC_390_GOTPLT16
5265 ENUMDOC
5266   16-bit offset to symbol-entry within GOT, with PLT handling.
5267 ENUM
5268   BFD_RELOC_390_GOTPLT32
5269 ENUMDOC
5270   32-bit offset to symbol-entry within GOT, with PLT handling.
5271 ENUM
5272   BFD_RELOC_390_GOTPLT64
5273 ENUMDOC
5274   64-bit offset to symbol-entry within GOT, with PLT handling.
5275 ENUM
5276   BFD_RELOC_390_GOTPLTENT
5277 ENUMDOC
5278   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5279 ENUM
5280   BFD_RELOC_390_PLTOFF16
5281 ENUMDOC
5282   16-bit rel. offset from the GOT to a PLT entry.
5283 ENUM
5284   BFD_RELOC_390_PLTOFF32
5285 ENUMDOC
5286   32-bit rel. offset from the GOT to a PLT entry.
5287 ENUM
5288   BFD_RELOC_390_PLTOFF64
5289 ENUMDOC
5290   64-bit rel. offset from the GOT to a PLT entry.
5291
5292 ENUM
5293   BFD_RELOC_390_TLS_LOAD
5294 ENUMX
5295   BFD_RELOC_390_TLS_GDCALL
5296 ENUMX
5297   BFD_RELOC_390_TLS_LDCALL
5298 ENUMX
5299   BFD_RELOC_390_TLS_GD32
5300 ENUMX
5301   BFD_RELOC_390_TLS_GD64
5302 ENUMX
5303   BFD_RELOC_390_TLS_GOTIE12
5304 ENUMX
5305   BFD_RELOC_390_TLS_GOTIE32
5306 ENUMX
5307   BFD_RELOC_390_TLS_GOTIE64
5308 ENUMX
5309   BFD_RELOC_390_TLS_LDM32
5310 ENUMX
5311   BFD_RELOC_390_TLS_LDM64
5312 ENUMX
5313   BFD_RELOC_390_TLS_IE32
5314 ENUMX
5315   BFD_RELOC_390_TLS_IE64
5316 ENUMX
5317   BFD_RELOC_390_TLS_IEENT
5318 ENUMX
5319   BFD_RELOC_390_TLS_LE32
5320 ENUMX
5321   BFD_RELOC_390_TLS_LE64
5322 ENUMX
5323   BFD_RELOC_390_TLS_LDO32
5324 ENUMX
5325   BFD_RELOC_390_TLS_LDO64
5326 ENUMX
5327   BFD_RELOC_390_TLS_DTPMOD
5328 ENUMX
5329   BFD_RELOC_390_TLS_DTPOFF
5330 ENUMX
5331   BFD_RELOC_390_TLS_TPOFF
5332 ENUMDOC
5333   s390 tls relocations.
5334
5335 ENUM
5336   BFD_RELOC_390_20
5337 ENUMX
5338   BFD_RELOC_390_GOT20
5339 ENUMX
5340   BFD_RELOC_390_GOTPLT20
5341 ENUMX
5342   BFD_RELOC_390_TLS_GOTIE20
5343 ENUMDOC
5344   Long displacement extension.
5345
5346 ENUM
5347   BFD_RELOC_390_IRELATIVE
5348 ENUMDOC
5349   STT_GNU_IFUNC relocation.
5350
5351 ENUM
5352   BFD_RELOC_SCORE_GPREL15
5353 ENUMDOC
5354   Score relocations
5355   Low 16 bit for load/store
5356 ENUM
5357   BFD_RELOC_SCORE_DUMMY2
5358 ENUMX
5359   BFD_RELOC_SCORE_JMP
5360 ENUMDOC
5361   This is a 24-bit reloc with the right 1 bit assumed to be 0
5362 ENUM
5363   BFD_RELOC_SCORE_BRANCH
5364 ENUMDOC
5365   This is a 19-bit reloc with the right 1 bit assumed to be 0
5366 ENUM
5367   BFD_RELOC_SCORE_IMM30
5368 ENUMDOC
5369   This is a 32-bit reloc for 48-bit instructions.
5370 ENUM
5371   BFD_RELOC_SCORE_IMM32
5372 ENUMDOC
5373   This is a 32-bit reloc for 48-bit instructions.
5374 ENUM
5375   BFD_RELOC_SCORE16_JMP
5376 ENUMDOC
5377   This is a 11-bit reloc with the right 1 bit assumed to be 0
5378 ENUM
5379   BFD_RELOC_SCORE16_BRANCH
5380 ENUMDOC
5381   This is a 8-bit reloc with the right 1 bit assumed to be 0
5382 ENUM
5383   BFD_RELOC_SCORE_BCMP
5384 ENUMDOC
5385    This is a 9-bit reloc with the right 1 bit assumed to be 0
5386 ENUM
5387   BFD_RELOC_SCORE_GOT15
5388 ENUMX
5389   BFD_RELOC_SCORE_GOT_LO16
5390 ENUMX
5391   BFD_RELOC_SCORE_CALL15
5392 ENUMX
5393   BFD_RELOC_SCORE_DUMMY_HI16
5394 ENUMDOC
5395   Undocumented Score relocs
5396
5397 ENUM
5398   BFD_RELOC_IP2K_FR9
5399 ENUMDOC
5400   Scenix IP2K - 9-bit register number / data address
5401 ENUM
5402   BFD_RELOC_IP2K_BANK
5403 ENUMDOC
5404   Scenix IP2K - 4-bit register/data bank number
5405 ENUM
5406   BFD_RELOC_IP2K_ADDR16CJP
5407 ENUMDOC
5408   Scenix IP2K - low 13 bits of instruction word address
5409 ENUM
5410   BFD_RELOC_IP2K_PAGE3
5411 ENUMDOC
5412   Scenix IP2K - high 3 bits of instruction word address
5413 ENUM
5414   BFD_RELOC_IP2K_LO8DATA
5415 ENUMX
5416   BFD_RELOC_IP2K_HI8DATA
5417 ENUMX
5418   BFD_RELOC_IP2K_EX8DATA
5419 ENUMDOC
5420   Scenix IP2K - ext/low/high 8 bits of data address
5421 ENUM
5422   BFD_RELOC_IP2K_LO8INSN
5423 ENUMX
5424   BFD_RELOC_IP2K_HI8INSN
5425 ENUMDOC
5426   Scenix IP2K - low/high 8 bits of instruction word address
5427 ENUM
5428   BFD_RELOC_IP2K_PC_SKIP
5429 ENUMDOC
5430   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5431 ENUM
5432   BFD_RELOC_IP2K_TEXT
5433 ENUMDOC
5434   Scenix IP2K - 16 bit word address in text section.
5435 ENUM
5436   BFD_RELOC_IP2K_FR_OFFSET
5437 ENUMDOC
5438   Scenix IP2K - 7-bit sp or dp offset
5439 ENUM
5440   BFD_RELOC_VPE4KMATH_DATA
5441 ENUMX
5442   BFD_RELOC_VPE4KMATH_INSN
5443 ENUMDOC
5444   Scenix VPE4K coprocessor - data/insn-space addressing
5445
5446 ENUM
5447   BFD_RELOC_VTABLE_INHERIT
5448 ENUMX
5449   BFD_RELOC_VTABLE_ENTRY
5450 ENUMDOC
5451   These two relocations are used by the linker to determine which of
5452   the entries in a C++ virtual function table are actually used.  When
5453   the --gc-sections option is given, the linker will zero out the entries
5454   that are not used, so that the code for those functions need not be
5455   included in the output.
5456
5457   VTABLE_INHERIT is a zero-space relocation used to describe to the
5458   linker the inheritance tree of a C++ virtual function table.  The
5459   relocation's symbol should be the parent class' vtable, and the
5460   relocation should be located at the child vtable.
5461
5462   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5463   virtual function table entry.  The reloc's symbol should refer to the
5464   table of the class mentioned in the code.  Off of that base, an offset
5465   describes the entry that is being used.  For Rela hosts, this offset
5466   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5467   this offset in the reloc's section offset.
5468
5469 ENUM
5470   BFD_RELOC_IA64_IMM14
5471 ENUMX
5472   BFD_RELOC_IA64_IMM22
5473 ENUMX
5474   BFD_RELOC_IA64_IMM64
5475 ENUMX
5476   BFD_RELOC_IA64_DIR32MSB
5477 ENUMX
5478   BFD_RELOC_IA64_DIR32LSB
5479 ENUMX
5480   BFD_RELOC_IA64_DIR64MSB
5481 ENUMX
5482   BFD_RELOC_IA64_DIR64LSB
5483 ENUMX
5484   BFD_RELOC_IA64_GPREL22
5485 ENUMX
5486   BFD_RELOC_IA64_GPREL64I
5487 ENUMX
5488   BFD_RELOC_IA64_GPREL32MSB
5489 ENUMX
5490   BFD_RELOC_IA64_GPREL32LSB
5491 ENUMX
5492   BFD_RELOC_IA64_GPREL64MSB
5493 ENUMX
5494   BFD_RELOC_IA64_GPREL64LSB
5495 ENUMX
5496   BFD_RELOC_IA64_LTOFF22
5497 ENUMX
5498   BFD_RELOC_IA64_LTOFF64I
5499 ENUMX
5500   BFD_RELOC_IA64_PLTOFF22
5501 ENUMX
5502   BFD_RELOC_IA64_PLTOFF64I
5503 ENUMX
5504   BFD_RELOC_IA64_PLTOFF64MSB
5505 ENUMX
5506   BFD_RELOC_IA64_PLTOFF64LSB
5507 ENUMX
5508   BFD_RELOC_IA64_FPTR64I
5509 ENUMX
5510   BFD_RELOC_IA64_FPTR32MSB
5511 ENUMX
5512   BFD_RELOC_IA64_FPTR32LSB
5513 ENUMX
5514   BFD_RELOC_IA64_FPTR64MSB
5515 ENUMX
5516   BFD_RELOC_IA64_FPTR64LSB
5517 ENUMX
5518   BFD_RELOC_IA64_PCREL21B
5519 ENUMX
5520   BFD_RELOC_IA64_PCREL21BI
5521 ENUMX
5522   BFD_RELOC_IA64_PCREL21M
5523 ENUMX
5524   BFD_RELOC_IA64_PCREL21F
5525 ENUMX
5526   BFD_RELOC_IA64_PCREL22
5527 ENUMX
5528   BFD_RELOC_IA64_PCREL60B
5529 ENUMX
5530   BFD_RELOC_IA64_PCREL64I
5531 ENUMX
5532   BFD_RELOC_IA64_PCREL32MSB
5533 ENUMX
5534   BFD_RELOC_IA64_PCREL32LSB
5535 ENUMX
5536   BFD_RELOC_IA64_PCREL64MSB
5537 ENUMX
5538   BFD_RELOC_IA64_PCREL64LSB
5539 ENUMX
5540   BFD_RELOC_IA64_LTOFF_FPTR22
5541 ENUMX
5542   BFD_RELOC_IA64_LTOFF_FPTR64I
5543 ENUMX
5544   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5545 ENUMX
5546   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5547 ENUMX
5548   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5549 ENUMX
5550   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5551 ENUMX
5552   BFD_RELOC_IA64_SEGREL32MSB
5553 ENUMX
5554   BFD_RELOC_IA64_SEGREL32LSB
5555 ENUMX
5556   BFD_RELOC_IA64_SEGREL64MSB
5557 ENUMX
5558   BFD_RELOC_IA64_SEGREL64LSB
5559 ENUMX
5560   BFD_RELOC_IA64_SECREL32MSB
5561 ENUMX
5562   BFD_RELOC_IA64_SECREL32LSB
5563 ENUMX
5564   BFD_RELOC_IA64_SECREL64MSB
5565 ENUMX
5566   BFD_RELOC_IA64_SECREL64LSB
5567 ENUMX
5568   BFD_RELOC_IA64_REL32MSB
5569 ENUMX
5570   BFD_RELOC_IA64_REL32LSB
5571 ENUMX
5572   BFD_RELOC_IA64_REL64MSB
5573 ENUMX
5574   BFD_RELOC_IA64_REL64LSB
5575 ENUMX
5576   BFD_RELOC_IA64_LTV32MSB
5577 ENUMX
5578   BFD_RELOC_IA64_LTV32LSB
5579 ENUMX
5580   BFD_RELOC_IA64_LTV64MSB
5581 ENUMX
5582   BFD_RELOC_IA64_LTV64LSB
5583 ENUMX
5584   BFD_RELOC_IA64_IPLTMSB
5585 ENUMX
5586   BFD_RELOC_IA64_IPLTLSB
5587 ENUMX
5588   BFD_RELOC_IA64_COPY
5589 ENUMX
5590   BFD_RELOC_IA64_LTOFF22X
5591 ENUMX
5592   BFD_RELOC_IA64_LDXMOV
5593 ENUMX
5594   BFD_RELOC_IA64_TPREL14
5595 ENUMX
5596   BFD_RELOC_IA64_TPREL22
5597 ENUMX
5598   BFD_RELOC_IA64_TPREL64I
5599 ENUMX
5600   BFD_RELOC_IA64_TPREL64MSB
5601 ENUMX
5602   BFD_RELOC_IA64_TPREL64LSB
5603 ENUMX
5604   BFD_RELOC_IA64_LTOFF_TPREL22
5605 ENUMX
5606   BFD_RELOC_IA64_DTPMOD64MSB
5607 ENUMX
5608   BFD_RELOC_IA64_DTPMOD64LSB
5609 ENUMX
5610   BFD_RELOC_IA64_LTOFF_DTPMOD22
5611 ENUMX
5612   BFD_RELOC_IA64_DTPREL14
5613 ENUMX
5614   BFD_RELOC_IA64_DTPREL22
5615 ENUMX
5616   BFD_RELOC_IA64_DTPREL64I
5617 ENUMX
5618   BFD_RELOC_IA64_DTPREL32MSB
5619 ENUMX
5620   BFD_RELOC_IA64_DTPREL32LSB
5621 ENUMX
5622   BFD_RELOC_IA64_DTPREL64MSB
5623 ENUMX
5624   BFD_RELOC_IA64_DTPREL64LSB
5625 ENUMX
5626   BFD_RELOC_IA64_LTOFF_DTPREL22
5627 ENUMDOC
5628   Intel IA64 Relocations.
5629
5630 ENUM
5631   BFD_RELOC_M68HC11_HI8
5632 ENUMDOC
5633   Motorola 68HC11 reloc.
5634   This is the 8 bit high part of an absolute address.
5635 ENUM
5636   BFD_RELOC_M68HC11_LO8
5637 ENUMDOC
5638   Motorola 68HC11 reloc.
5639   This is the 8 bit low part of an absolute address.
5640 ENUM
5641   BFD_RELOC_M68HC11_3B
5642 ENUMDOC
5643   Motorola 68HC11 reloc.
5644   This is the 3 bit of a value.
5645 ENUM
5646   BFD_RELOC_M68HC11_RL_JUMP
5647 ENUMDOC
5648   Motorola 68HC11 reloc.
5649   This reloc marks the beginning of a jump/call instruction.
5650   It is used for linker relaxation to correctly identify beginning
5651   of instruction and change some branches to use PC-relative
5652   addressing mode.
5653 ENUM
5654   BFD_RELOC_M68HC11_RL_GROUP
5655 ENUMDOC
5656   Motorola 68HC11 reloc.
5657   This reloc marks a group of several instructions that gcc generates
5658   and for which the linker relaxation pass can modify and/or remove
5659   some of them.
5660 ENUM
5661   BFD_RELOC_M68HC11_LO16
5662 ENUMDOC
5663   Motorola 68HC11 reloc.
5664   This is the 16-bit lower part of an address.  It is used for 'call'
5665   instruction to specify the symbol address without any special
5666   transformation (due to memory bank window).
5667 ENUM
5668   BFD_RELOC_M68HC11_PAGE
5669 ENUMDOC
5670   Motorola 68HC11 reloc.
5671   This is a 8-bit reloc that specifies the page number of an address.
5672   It is used by 'call' instruction to specify the page number of
5673   the symbol.
5674 ENUM
5675   BFD_RELOC_M68HC11_24
5676 ENUMDOC
5677   Motorola 68HC11 reloc.
5678   This is a 24-bit reloc that represents the address with a 16-bit
5679   value and a 8-bit page number.  The symbol address is transformed
5680   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5681 ENUM
5682   BFD_RELOC_M68HC12_5B
5683 ENUMDOC
5684   Motorola 68HC12 reloc.
5685   This is the 5 bits of a value.
5686 ENUM
5687   BFD_RELOC_XGATE_RL_JUMP
5688 ENUMDOC
5689   Freescale XGATE reloc.
5690   This reloc marks the beginning of a bra/jal instruction.
5691 ENUM
5692   BFD_RELOC_XGATE_RL_GROUP
5693 ENUMDOC
5694   Freescale XGATE reloc.
5695   This reloc marks a group of several instructions that gcc generates
5696   and for which the linker relaxation pass can modify and/or remove
5697   some of them.
5698 ENUM
5699   BFD_RELOC_XGATE_LO16
5700 ENUMDOC
5701   Freescale XGATE reloc.
5702   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5703   instructions.
5704 ENUM
5705   BFD_RELOC_XGATE_GPAGE
5706 ENUMDOC
5707   Freescale XGATE reloc.
5708 ENUM
5709   BFD_RELOC_XGATE_24
5710 ENUMDOC
5711   Freescale XGATE reloc.
5712 ENUM
5713   BFD_RELOC_XGATE_PCREL_9
5714 ENUMDOC
5715   Freescale XGATE reloc.
5716   This is a 9-bit pc-relative reloc.
5717 ENUM
5718   BFD_RELOC_XGATE_PCREL_10
5719 ENUMDOC
5720   Freescale XGATE reloc.
5721   This is a 10-bit pc-relative reloc.
5722 ENUM
5723   BFD_RELOC_XGATE_IMM8_LO
5724 ENUMDOC
5725   Freescale XGATE reloc.
5726   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5727   instructions.
5728 ENUM
5729   BFD_RELOC_XGATE_IMM8_HI
5730 ENUMDOC
5731   Freescale XGATE reloc.
5732   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5733   instructions.
5734 ENUM
5735   BFD_RELOC_XGATE_IMM3
5736 ENUMDOC
5737   Freescale XGATE reloc.
5738   This is a 3-bit pc-relative reloc.
5739 ENUM
5740   BFD_RELOC_XGATE_IMM4
5741 ENUMDOC
5742   Freescale XGATE reloc.
5743   This is a 4-bit pc-relative reloc.
5744 ENUM
5745   BFD_RELOC_XGATE_IMM5
5746 ENUMDOC
5747   Freescale XGATE reloc.
5748   This is a 5-bit pc-relative reloc.
5749 ENUM
5750   BFD_RELOC_M68HC12_9B
5751 ENUMDOC
5752   Motorola 68HC12 reloc.
5753   This is the 9 bits of a value.
5754 ENUM
5755   BFD_RELOC_M68HC12_16B
5756 ENUMDOC
5757   Motorola 68HC12 reloc.
5758   This is the 16 bits of a value.
5759 ENUM
5760   BFD_RELOC_M68HC12_9_PCREL
5761 ENUMDOC
5762   Motorola 68HC12/XGATE reloc.
5763   This is a PCREL9 branch.
5764 ENUM
5765   BFD_RELOC_M68HC12_10_PCREL
5766 ENUMDOC
5767   Motorola 68HC12/XGATE reloc.
5768   This is a PCREL10 branch.
5769 ENUM
5770   BFD_RELOC_M68HC12_LO8XG
5771 ENUMDOC
5772   Motorola 68HC12/XGATE reloc.
5773   This is the 8 bit low part of an absolute address and immediately precedes
5774   a matching HI8XG part.
5775 ENUM
5776   BFD_RELOC_M68HC12_HI8XG
5777 ENUMDOC
5778   Motorola 68HC12/XGATE reloc.
5779   This is the 8 bit high part of an absolute address and immediately follows
5780   a matching LO8XG part.
5781 ENUM
5782   BFD_RELOC_16C_NUM08
5783 ENUMX
5784   BFD_RELOC_16C_NUM08_C
5785 ENUMX
5786   BFD_RELOC_16C_NUM16
5787 ENUMX
5788   BFD_RELOC_16C_NUM16_C
5789 ENUMX
5790   BFD_RELOC_16C_NUM32
5791 ENUMX
5792   BFD_RELOC_16C_NUM32_C
5793 ENUMX
5794   BFD_RELOC_16C_DISP04
5795 ENUMX
5796   BFD_RELOC_16C_DISP04_C
5797 ENUMX
5798   BFD_RELOC_16C_DISP08
5799 ENUMX
5800   BFD_RELOC_16C_DISP08_C
5801 ENUMX
5802   BFD_RELOC_16C_DISP16
5803 ENUMX
5804   BFD_RELOC_16C_DISP16_C
5805 ENUMX
5806   BFD_RELOC_16C_DISP24
5807 ENUMX
5808   BFD_RELOC_16C_DISP24_C
5809 ENUMX
5810   BFD_RELOC_16C_DISP24a
5811 ENUMX
5812   BFD_RELOC_16C_DISP24a_C
5813 ENUMX
5814   BFD_RELOC_16C_REG04
5815 ENUMX
5816   BFD_RELOC_16C_REG04_C
5817 ENUMX
5818   BFD_RELOC_16C_REG04a
5819 ENUMX
5820   BFD_RELOC_16C_REG04a_C
5821 ENUMX
5822   BFD_RELOC_16C_REG14
5823 ENUMX
5824   BFD_RELOC_16C_REG14_C
5825 ENUMX
5826   BFD_RELOC_16C_REG16
5827 ENUMX
5828   BFD_RELOC_16C_REG16_C
5829 ENUMX
5830   BFD_RELOC_16C_REG20
5831 ENUMX
5832   BFD_RELOC_16C_REG20_C
5833 ENUMX
5834   BFD_RELOC_16C_ABS20
5835 ENUMX
5836   BFD_RELOC_16C_ABS20_C
5837 ENUMX
5838   BFD_RELOC_16C_ABS24
5839 ENUMX
5840   BFD_RELOC_16C_ABS24_C
5841 ENUMX
5842   BFD_RELOC_16C_IMM04
5843 ENUMX
5844   BFD_RELOC_16C_IMM04_C
5845 ENUMX
5846   BFD_RELOC_16C_IMM16
5847 ENUMX
5848   BFD_RELOC_16C_IMM16_C
5849 ENUMX
5850   BFD_RELOC_16C_IMM20
5851 ENUMX
5852   BFD_RELOC_16C_IMM20_C
5853 ENUMX
5854   BFD_RELOC_16C_IMM24
5855 ENUMX
5856   BFD_RELOC_16C_IMM24_C
5857 ENUMX
5858   BFD_RELOC_16C_IMM32
5859 ENUMX
5860   BFD_RELOC_16C_IMM32_C
5861 ENUMDOC
5862   NS CR16C Relocations.
5863
5864 ENUM
5865   BFD_RELOC_CR16_NUM8
5866 ENUMX
5867   BFD_RELOC_CR16_NUM16
5868 ENUMX
5869   BFD_RELOC_CR16_NUM32
5870 ENUMX
5871   BFD_RELOC_CR16_NUM32a
5872 ENUMX
5873   BFD_RELOC_CR16_REGREL0
5874 ENUMX
5875   BFD_RELOC_CR16_REGREL4
5876 ENUMX
5877   BFD_RELOC_CR16_REGREL4a
5878 ENUMX
5879   BFD_RELOC_CR16_REGREL14
5880 ENUMX
5881   BFD_RELOC_CR16_REGREL14a
5882 ENUMX
5883   BFD_RELOC_CR16_REGREL16
5884 ENUMX
5885   BFD_RELOC_CR16_REGREL20
5886 ENUMX
5887   BFD_RELOC_CR16_REGREL20a
5888 ENUMX
5889   BFD_RELOC_CR16_ABS20
5890 ENUMX
5891   BFD_RELOC_CR16_ABS24
5892 ENUMX
5893   BFD_RELOC_CR16_IMM4
5894 ENUMX
5895   BFD_RELOC_CR16_IMM8
5896 ENUMX
5897   BFD_RELOC_CR16_IMM16
5898 ENUMX
5899   BFD_RELOC_CR16_IMM20
5900 ENUMX
5901   BFD_RELOC_CR16_IMM24
5902 ENUMX
5903   BFD_RELOC_CR16_IMM32
5904 ENUMX
5905   BFD_RELOC_CR16_IMM32a
5906 ENUMX
5907   BFD_RELOC_CR16_DISP4
5908 ENUMX
5909   BFD_RELOC_CR16_DISP8
5910 ENUMX
5911   BFD_RELOC_CR16_DISP16
5912 ENUMX
5913   BFD_RELOC_CR16_DISP20
5914 ENUMX
5915   BFD_RELOC_CR16_DISP24
5916 ENUMX
5917   BFD_RELOC_CR16_DISP24a
5918 ENUMX
5919   BFD_RELOC_CR16_SWITCH8
5920 ENUMX
5921   BFD_RELOC_CR16_SWITCH16
5922 ENUMX
5923   BFD_RELOC_CR16_SWITCH32
5924 ENUMX
5925   BFD_RELOC_CR16_GOT_REGREL20
5926 ENUMX
5927   BFD_RELOC_CR16_GOTC_REGREL20
5928 ENUMX
5929   BFD_RELOC_CR16_GLOB_DAT
5930 ENUMDOC
5931   NS CR16 Relocations.
5932
5933 ENUM
5934   BFD_RELOC_CRX_REL4
5935 ENUMX
5936   BFD_RELOC_CRX_REL8
5937 ENUMX
5938   BFD_RELOC_CRX_REL8_CMP
5939 ENUMX
5940   BFD_RELOC_CRX_REL16
5941 ENUMX
5942   BFD_RELOC_CRX_REL24
5943 ENUMX
5944   BFD_RELOC_CRX_REL32
5945 ENUMX
5946   BFD_RELOC_CRX_REGREL12
5947 ENUMX
5948   BFD_RELOC_CRX_REGREL22
5949 ENUMX
5950   BFD_RELOC_CRX_REGREL28
5951 ENUMX
5952   BFD_RELOC_CRX_REGREL32
5953 ENUMX
5954   BFD_RELOC_CRX_ABS16
5955 ENUMX
5956   BFD_RELOC_CRX_ABS32
5957 ENUMX
5958   BFD_RELOC_CRX_NUM8
5959 ENUMX
5960   BFD_RELOC_CRX_NUM16
5961 ENUMX
5962   BFD_RELOC_CRX_NUM32
5963 ENUMX
5964   BFD_RELOC_CRX_IMM16
5965 ENUMX
5966   BFD_RELOC_CRX_IMM32
5967 ENUMX
5968   BFD_RELOC_CRX_SWITCH8
5969 ENUMX
5970   BFD_RELOC_CRX_SWITCH16
5971 ENUMX
5972   BFD_RELOC_CRX_SWITCH32
5973 ENUMDOC
5974   NS CRX Relocations.
5975
5976 ENUM
5977   BFD_RELOC_CRIS_BDISP8
5978 ENUMX
5979   BFD_RELOC_CRIS_UNSIGNED_5
5980 ENUMX
5981   BFD_RELOC_CRIS_SIGNED_6
5982 ENUMX
5983   BFD_RELOC_CRIS_UNSIGNED_6
5984 ENUMX
5985   BFD_RELOC_CRIS_SIGNED_8
5986 ENUMX
5987   BFD_RELOC_CRIS_UNSIGNED_8
5988 ENUMX
5989   BFD_RELOC_CRIS_SIGNED_16
5990 ENUMX
5991   BFD_RELOC_CRIS_UNSIGNED_16
5992 ENUMX
5993   BFD_RELOC_CRIS_LAPCQ_OFFSET
5994 ENUMX
5995   BFD_RELOC_CRIS_UNSIGNED_4
5996 ENUMDOC
5997   These relocs are only used within the CRIS assembler.  They are not
5998   (at present) written to any object files.
5999 ENUM
6000   BFD_RELOC_CRIS_COPY
6001 ENUMX
6002   BFD_RELOC_CRIS_GLOB_DAT
6003 ENUMX
6004   BFD_RELOC_CRIS_JUMP_SLOT
6005 ENUMX
6006   BFD_RELOC_CRIS_RELATIVE
6007 ENUMDOC
6008   Relocs used in ELF shared libraries for CRIS.
6009 ENUM
6010   BFD_RELOC_CRIS_32_GOT
6011 ENUMDOC
6012   32-bit offset to symbol-entry within GOT.
6013 ENUM
6014   BFD_RELOC_CRIS_16_GOT
6015 ENUMDOC
6016   16-bit offset to symbol-entry within GOT.
6017 ENUM
6018   BFD_RELOC_CRIS_32_GOTPLT
6019 ENUMDOC
6020   32-bit offset to symbol-entry within GOT, with PLT handling.
6021 ENUM
6022   BFD_RELOC_CRIS_16_GOTPLT
6023 ENUMDOC
6024   16-bit offset to symbol-entry within GOT, with PLT handling.
6025 ENUM
6026   BFD_RELOC_CRIS_32_GOTREL
6027 ENUMDOC
6028   32-bit offset to symbol, relative to GOT.
6029 ENUM
6030   BFD_RELOC_CRIS_32_PLT_GOTREL
6031 ENUMDOC
6032   32-bit offset to symbol with PLT entry, relative to GOT.
6033 ENUM
6034   BFD_RELOC_CRIS_32_PLT_PCREL
6035 ENUMDOC
6036   32-bit offset to symbol with PLT entry, relative to this relocation.
6037
6038 ENUM
6039   BFD_RELOC_CRIS_32_GOT_GD
6040 ENUMX
6041   BFD_RELOC_CRIS_16_GOT_GD
6042 ENUMX
6043   BFD_RELOC_CRIS_32_GD
6044 ENUMX
6045   BFD_RELOC_CRIS_DTP
6046 ENUMX
6047   BFD_RELOC_CRIS_32_DTPREL
6048 ENUMX
6049   BFD_RELOC_CRIS_16_DTPREL
6050 ENUMX
6051   BFD_RELOC_CRIS_32_GOT_TPREL
6052 ENUMX
6053   BFD_RELOC_CRIS_16_GOT_TPREL
6054 ENUMX
6055   BFD_RELOC_CRIS_32_TPREL
6056 ENUMX
6057   BFD_RELOC_CRIS_16_TPREL
6058 ENUMX
6059   BFD_RELOC_CRIS_DTPMOD
6060 ENUMX
6061   BFD_RELOC_CRIS_32_IE
6062 ENUMDOC
6063   Relocs used in TLS code for CRIS.
6064
6065 ENUM
6066   BFD_RELOC_860_COPY
6067 ENUMX
6068   BFD_RELOC_860_GLOB_DAT
6069 ENUMX
6070   BFD_RELOC_860_JUMP_SLOT
6071 ENUMX
6072   BFD_RELOC_860_RELATIVE
6073 ENUMX
6074   BFD_RELOC_860_PC26
6075 ENUMX
6076   BFD_RELOC_860_PLT26
6077 ENUMX
6078   BFD_RELOC_860_PC16
6079 ENUMX
6080   BFD_RELOC_860_LOW0
6081 ENUMX
6082   BFD_RELOC_860_SPLIT0
6083 ENUMX
6084   BFD_RELOC_860_LOW1
6085 ENUMX
6086   BFD_RELOC_860_SPLIT1
6087 ENUMX
6088   BFD_RELOC_860_LOW2
6089 ENUMX
6090   BFD_RELOC_860_SPLIT2
6091 ENUMX
6092   BFD_RELOC_860_LOW3
6093 ENUMX
6094   BFD_RELOC_860_LOGOT0
6095 ENUMX
6096   BFD_RELOC_860_SPGOT0
6097 ENUMX
6098   BFD_RELOC_860_LOGOT1
6099 ENUMX
6100   BFD_RELOC_860_SPGOT1
6101 ENUMX
6102   BFD_RELOC_860_LOGOTOFF0
6103 ENUMX
6104   BFD_RELOC_860_SPGOTOFF0
6105 ENUMX
6106   BFD_RELOC_860_LOGOTOFF1
6107 ENUMX
6108   BFD_RELOC_860_SPGOTOFF1
6109 ENUMX
6110   BFD_RELOC_860_LOGOTOFF2
6111 ENUMX
6112   BFD_RELOC_860_LOGOTOFF3
6113 ENUMX
6114   BFD_RELOC_860_LOPC
6115 ENUMX
6116   BFD_RELOC_860_HIGHADJ
6117 ENUMX
6118   BFD_RELOC_860_HAGOT
6119 ENUMX
6120   BFD_RELOC_860_HAGOTOFF
6121 ENUMX
6122   BFD_RELOC_860_HAPC
6123 ENUMX
6124   BFD_RELOC_860_HIGH
6125 ENUMX
6126   BFD_RELOC_860_HIGOT
6127 ENUMX
6128   BFD_RELOC_860_HIGOTOFF
6129 ENUMDOC
6130   Intel i860 Relocations.
6131
6132 ENUM
6133   BFD_RELOC_OR1K_REL_26
6134 ENUMX
6135   BFD_RELOC_OR1K_GOTPC_HI16
6136 ENUMX
6137   BFD_RELOC_OR1K_GOTPC_LO16
6138 ENUMX
6139   BFD_RELOC_OR1K_GOT16
6140 ENUMX
6141   BFD_RELOC_OR1K_PLT26
6142 ENUMX
6143   BFD_RELOC_OR1K_GOTOFF_HI16
6144 ENUMX
6145   BFD_RELOC_OR1K_GOTOFF_LO16
6146 ENUMX
6147   BFD_RELOC_OR1K_COPY
6148 ENUMX
6149   BFD_RELOC_OR1K_GLOB_DAT
6150 ENUMX
6151   BFD_RELOC_OR1K_JMP_SLOT
6152 ENUMX
6153   BFD_RELOC_OR1K_RELATIVE
6154 ENUMX
6155   BFD_RELOC_OR1K_TLS_GD_HI16
6156 ENUMX
6157   BFD_RELOC_OR1K_TLS_GD_LO16
6158 ENUMX
6159   BFD_RELOC_OR1K_TLS_LDM_HI16
6160 ENUMX
6161   BFD_RELOC_OR1K_TLS_LDM_LO16
6162 ENUMX
6163   BFD_RELOC_OR1K_TLS_LDO_HI16
6164 ENUMX
6165   BFD_RELOC_OR1K_TLS_LDO_LO16
6166 ENUMX
6167   BFD_RELOC_OR1K_TLS_IE_HI16
6168 ENUMX
6169   BFD_RELOC_OR1K_TLS_IE_LO16
6170 ENUMX
6171   BFD_RELOC_OR1K_TLS_LE_HI16
6172 ENUMX
6173   BFD_RELOC_OR1K_TLS_LE_LO16
6174 ENUMX
6175   BFD_RELOC_OR1K_TLS_TPOFF
6176 ENUMX
6177   BFD_RELOC_OR1K_TLS_DTPOFF
6178 ENUMX
6179   BFD_RELOC_OR1K_TLS_DTPMOD
6180 ENUMDOC
6181   OpenRISC 1000 Relocations.
6182
6183 ENUM
6184   BFD_RELOC_H8_DIR16A8
6185 ENUMX
6186   BFD_RELOC_H8_DIR16R8
6187 ENUMX
6188   BFD_RELOC_H8_DIR24A8
6189 ENUMX
6190   BFD_RELOC_H8_DIR24R8
6191 ENUMX
6192   BFD_RELOC_H8_DIR32A16
6193 ENUMX
6194   BFD_RELOC_H8_DISP32A16
6195 ENUMDOC
6196   H8 elf Relocations.
6197
6198 ENUM
6199   BFD_RELOC_XSTORMY16_REL_12
6200 ENUMX
6201   BFD_RELOC_XSTORMY16_12
6202 ENUMX
6203   BFD_RELOC_XSTORMY16_24
6204 ENUMX
6205   BFD_RELOC_XSTORMY16_FPTR16
6206 ENUMDOC
6207   Sony Xstormy16 Relocations.
6208
6209 ENUM
6210   BFD_RELOC_RELC
6211 ENUMDOC
6212   Self-describing complex relocations.
6213 COMMENT
6214
6215 ENUM
6216   BFD_RELOC_XC16X_PAG
6217 ENUMX
6218   BFD_RELOC_XC16X_POF
6219 ENUMX
6220   BFD_RELOC_XC16X_SEG
6221 ENUMX
6222   BFD_RELOC_XC16X_SOF
6223 ENUMDOC
6224   Infineon Relocations.
6225
6226 ENUM
6227   BFD_RELOC_VAX_GLOB_DAT
6228 ENUMX
6229   BFD_RELOC_VAX_JMP_SLOT
6230 ENUMX
6231   BFD_RELOC_VAX_RELATIVE
6232 ENUMDOC
6233   Relocations used by VAX ELF.
6234
6235 ENUM
6236   BFD_RELOC_MT_PC16
6237 ENUMDOC
6238   Morpho MT - 16 bit immediate relocation.
6239 ENUM
6240   BFD_RELOC_MT_HI16
6241 ENUMDOC
6242   Morpho MT - Hi 16 bits of an address.
6243 ENUM
6244   BFD_RELOC_MT_LO16
6245 ENUMDOC
6246   Morpho MT - Low 16 bits of an address.
6247 ENUM
6248   BFD_RELOC_MT_GNU_VTINHERIT
6249 ENUMDOC
6250   Morpho MT - Used to tell the linker which vtable entries are used.
6251 ENUM
6252   BFD_RELOC_MT_GNU_VTENTRY
6253 ENUMDOC
6254   Morpho MT - Used to tell the linker which vtable entries are used.
6255 ENUM
6256   BFD_RELOC_MT_PCINSN8
6257 ENUMDOC
6258   Morpho MT - 8 bit immediate relocation.
6259
6260 ENUM
6261   BFD_RELOC_MSP430_10_PCREL
6262 ENUMX
6263   BFD_RELOC_MSP430_16_PCREL
6264 ENUMX
6265   BFD_RELOC_MSP430_16
6266 ENUMX
6267   BFD_RELOC_MSP430_16_PCREL_BYTE
6268 ENUMX
6269   BFD_RELOC_MSP430_16_BYTE
6270 ENUMX
6271   BFD_RELOC_MSP430_2X_PCREL
6272 ENUMX
6273   BFD_RELOC_MSP430_RL_PCREL
6274 ENUMX
6275   BFD_RELOC_MSP430_ABS8
6276 ENUMX
6277   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6278 ENUMX
6279   BFD_RELOC_MSP430X_PCR20_EXT_DST
6280 ENUMX
6281   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6282 ENUMX
6283   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6284 ENUMX
6285   BFD_RELOC_MSP430X_ABS20_EXT_DST
6286 ENUMX
6287   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6288 ENUMX
6289   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6290 ENUMX
6291   BFD_RELOC_MSP430X_ABS20_ADR_DST
6292 ENUMX
6293   BFD_RELOC_MSP430X_PCR16
6294 ENUMX
6295   BFD_RELOC_MSP430X_PCR20_CALL
6296 ENUMX
6297   BFD_RELOC_MSP430X_ABS16
6298 ENUMX
6299   BFD_RELOC_MSP430_ABS_HI16
6300 ENUMX
6301   BFD_RELOC_MSP430_PREL31
6302 ENUMX
6303   BFD_RELOC_MSP430_SYM_DIFF
6304 ENUMDOC
6305   msp430 specific relocation codes
6306
6307 ENUM
6308   BFD_RELOC_NIOS2_S16
6309 ENUMX
6310   BFD_RELOC_NIOS2_U16
6311 ENUMX
6312   BFD_RELOC_NIOS2_CALL26
6313 ENUMX
6314   BFD_RELOC_NIOS2_IMM5
6315 ENUMX
6316   BFD_RELOC_NIOS2_CACHE_OPX
6317 ENUMX
6318   BFD_RELOC_NIOS2_IMM6
6319 ENUMX
6320   BFD_RELOC_NIOS2_IMM8
6321 ENUMX
6322   BFD_RELOC_NIOS2_HI16
6323 ENUMX
6324   BFD_RELOC_NIOS2_LO16
6325 ENUMX
6326   BFD_RELOC_NIOS2_HIADJ16
6327 ENUMX
6328   BFD_RELOC_NIOS2_GPREL
6329 ENUMX
6330   BFD_RELOC_NIOS2_UJMP
6331 ENUMX
6332   BFD_RELOC_NIOS2_CJMP
6333 ENUMX
6334   BFD_RELOC_NIOS2_CALLR
6335 ENUMX
6336   BFD_RELOC_NIOS2_ALIGN
6337 ENUMX
6338   BFD_RELOC_NIOS2_GOT16
6339 ENUMX
6340   BFD_RELOC_NIOS2_CALL16
6341 ENUMX
6342   BFD_RELOC_NIOS2_GOTOFF_LO
6343 ENUMX
6344   BFD_RELOC_NIOS2_GOTOFF_HA
6345 ENUMX
6346   BFD_RELOC_NIOS2_PCREL_LO
6347 ENUMX
6348   BFD_RELOC_NIOS2_PCREL_HA
6349 ENUMX
6350   BFD_RELOC_NIOS2_TLS_GD16
6351 ENUMX
6352   BFD_RELOC_NIOS2_TLS_LDM16
6353 ENUMX
6354   BFD_RELOC_NIOS2_TLS_LDO16
6355 ENUMX
6356   BFD_RELOC_NIOS2_TLS_IE16
6357 ENUMX
6358   BFD_RELOC_NIOS2_TLS_LE16
6359 ENUMX
6360   BFD_RELOC_NIOS2_TLS_DTPMOD
6361 ENUMX
6362   BFD_RELOC_NIOS2_TLS_DTPREL
6363 ENUMX
6364   BFD_RELOC_NIOS2_TLS_TPREL
6365 ENUMX
6366   BFD_RELOC_NIOS2_COPY
6367 ENUMX
6368   BFD_RELOC_NIOS2_GLOB_DAT
6369 ENUMX
6370   BFD_RELOC_NIOS2_JUMP_SLOT
6371 ENUMX
6372   BFD_RELOC_NIOS2_RELATIVE
6373 ENUMX
6374   BFD_RELOC_NIOS2_GOTOFF
6375 ENUMX
6376   BFD_RELOC_NIOS2_CALL26_NOAT
6377 ENUMX
6378   BFD_RELOC_NIOS2_GOT_LO
6379 ENUMX
6380   BFD_RELOC_NIOS2_GOT_HA
6381 ENUMX
6382   BFD_RELOC_NIOS2_CALL_LO
6383 ENUMX
6384   BFD_RELOC_NIOS2_CALL_HA
6385 ENUMX
6386   BFD_RELOC_NIOS2_R2_S12
6387 ENUMX
6388   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6389 ENUMX
6390   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6391 ENUMX
6392   BFD_RELOC_NIOS2_R2_T1I7_2
6393 ENUMX
6394   BFD_RELOC_NIOS2_R2_T2I4
6395 ENUMX
6396   BFD_RELOC_NIOS2_R2_T2I4_1
6397 ENUMX
6398   BFD_RELOC_NIOS2_R2_T2I4_2
6399 ENUMX
6400   BFD_RELOC_NIOS2_R2_X1I7_2
6401 ENUMX
6402   BFD_RELOC_NIOS2_R2_X2L5
6403 ENUMX
6404   BFD_RELOC_NIOS2_R2_F1I5_2
6405 ENUMX
6406   BFD_RELOC_NIOS2_R2_L5I4X1
6407 ENUMX
6408   BFD_RELOC_NIOS2_R2_T1X1I6
6409 ENUMX
6410   BFD_RELOC_NIOS2_R2_T1X1I6_2
6411 ENUMDOC
6412   Relocations used by the Altera Nios II core.
6413
6414 ENUM
6415   BFD_RELOC_IQ2000_OFFSET_16
6416 ENUMX
6417   BFD_RELOC_IQ2000_OFFSET_21
6418 ENUMX
6419   BFD_RELOC_IQ2000_UHI16
6420 ENUMDOC
6421   IQ2000 Relocations.
6422
6423 ENUM
6424   BFD_RELOC_XTENSA_RTLD
6425 ENUMDOC
6426   Special Xtensa relocation used only by PLT entries in ELF shared
6427   objects to indicate that the runtime linker should set the value
6428   to one of its own internal functions or data structures.
6429 ENUM
6430   BFD_RELOC_XTENSA_GLOB_DAT
6431 ENUMX
6432   BFD_RELOC_XTENSA_JMP_SLOT
6433 ENUMX
6434   BFD_RELOC_XTENSA_RELATIVE
6435 ENUMDOC
6436   Xtensa relocations for ELF shared objects.
6437 ENUM
6438   BFD_RELOC_XTENSA_PLT
6439 ENUMDOC
6440   Xtensa relocation used in ELF object files for symbols that may require
6441   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6442 ENUM
6443   BFD_RELOC_XTENSA_DIFF8
6444 ENUMX
6445   BFD_RELOC_XTENSA_DIFF16
6446 ENUMX
6447   BFD_RELOC_XTENSA_DIFF32
6448 ENUMDOC
6449   Xtensa relocations to mark the difference of two local symbols.
6450   These are only needed to support linker relaxation and can be ignored
6451   when not relaxing.  The field is set to the value of the difference
6452   assuming no relaxation.  The relocation encodes the position of the
6453   first symbol so the linker can determine whether to adjust the field
6454   value.
6455 ENUM
6456   BFD_RELOC_XTENSA_SLOT0_OP
6457 ENUMX
6458   BFD_RELOC_XTENSA_SLOT1_OP
6459 ENUMX
6460   BFD_RELOC_XTENSA_SLOT2_OP
6461 ENUMX
6462   BFD_RELOC_XTENSA_SLOT3_OP
6463 ENUMX
6464   BFD_RELOC_XTENSA_SLOT4_OP
6465 ENUMX
6466   BFD_RELOC_XTENSA_SLOT5_OP
6467 ENUMX
6468   BFD_RELOC_XTENSA_SLOT6_OP
6469 ENUMX
6470   BFD_RELOC_XTENSA_SLOT7_OP
6471 ENUMX
6472   BFD_RELOC_XTENSA_SLOT8_OP
6473 ENUMX
6474   BFD_RELOC_XTENSA_SLOT9_OP
6475 ENUMX
6476   BFD_RELOC_XTENSA_SLOT10_OP
6477 ENUMX
6478   BFD_RELOC_XTENSA_SLOT11_OP
6479 ENUMX
6480   BFD_RELOC_XTENSA_SLOT12_OP
6481 ENUMX
6482   BFD_RELOC_XTENSA_SLOT13_OP
6483 ENUMX
6484   BFD_RELOC_XTENSA_SLOT14_OP
6485 ENUMDOC
6486   Generic Xtensa relocations for instruction operands.  Only the slot
6487   number is encoded in the relocation.  The relocation applies to the
6488   last PC-relative immediate operand, or if there are no PC-relative
6489   immediates, to the last immediate operand.
6490 ENUM
6491   BFD_RELOC_XTENSA_SLOT0_ALT
6492 ENUMX
6493   BFD_RELOC_XTENSA_SLOT1_ALT
6494 ENUMX
6495   BFD_RELOC_XTENSA_SLOT2_ALT
6496 ENUMX
6497   BFD_RELOC_XTENSA_SLOT3_ALT
6498 ENUMX
6499   BFD_RELOC_XTENSA_SLOT4_ALT
6500 ENUMX
6501   BFD_RELOC_XTENSA_SLOT5_ALT
6502 ENUMX
6503   BFD_RELOC_XTENSA_SLOT6_ALT
6504 ENUMX
6505   BFD_RELOC_XTENSA_SLOT7_ALT
6506 ENUMX
6507   BFD_RELOC_XTENSA_SLOT8_ALT
6508 ENUMX
6509   BFD_RELOC_XTENSA_SLOT9_ALT
6510 ENUMX
6511   BFD_RELOC_XTENSA_SLOT10_ALT
6512 ENUMX
6513   BFD_RELOC_XTENSA_SLOT11_ALT
6514 ENUMX
6515   BFD_RELOC_XTENSA_SLOT12_ALT
6516 ENUMX
6517   BFD_RELOC_XTENSA_SLOT13_ALT
6518 ENUMX
6519   BFD_RELOC_XTENSA_SLOT14_ALT
6520 ENUMDOC
6521   Alternate Xtensa relocations.  Only the slot is encoded in the
6522   relocation.  The meaning of these relocations is opcode-specific.
6523 ENUM
6524   BFD_RELOC_XTENSA_OP0
6525 ENUMX
6526   BFD_RELOC_XTENSA_OP1
6527 ENUMX
6528   BFD_RELOC_XTENSA_OP2
6529 ENUMDOC
6530   Xtensa relocations for backward compatibility.  These have all been
6531   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6532 ENUM
6533   BFD_RELOC_XTENSA_ASM_EXPAND
6534 ENUMDOC
6535   Xtensa relocation to mark that the assembler expanded the
6536   instructions from an original target.  The expansion size is
6537   encoded in the reloc size.
6538 ENUM
6539   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6540 ENUMDOC
6541   Xtensa relocation to mark that the linker should simplify
6542   assembler-expanded instructions.  This is commonly used
6543   internally by the linker after analysis of a
6544   BFD_RELOC_XTENSA_ASM_EXPAND.
6545 ENUM
6546   BFD_RELOC_XTENSA_TLSDESC_FN
6547 ENUMX
6548   BFD_RELOC_XTENSA_TLSDESC_ARG
6549 ENUMX
6550   BFD_RELOC_XTENSA_TLS_DTPOFF
6551 ENUMX
6552   BFD_RELOC_XTENSA_TLS_TPOFF
6553 ENUMX
6554   BFD_RELOC_XTENSA_TLS_FUNC
6555 ENUMX
6556   BFD_RELOC_XTENSA_TLS_ARG
6557 ENUMX
6558   BFD_RELOC_XTENSA_TLS_CALL
6559 ENUMDOC
6560   Xtensa TLS relocations.
6561
6562 ENUM
6563   BFD_RELOC_Z80_DISP8
6564 ENUMDOC
6565   8 bit signed offset in (ix+d) or (iy+d).
6566
6567 ENUM
6568   BFD_RELOC_Z8K_DISP7
6569 ENUMDOC
6570   DJNZ offset.
6571 ENUM
6572   BFD_RELOC_Z8K_CALLR
6573 ENUMDOC
6574   CALR offset.
6575 ENUM
6576   BFD_RELOC_Z8K_IMM4L
6577 ENUMDOC
6578   4 bit value.
6579
6580 ENUM
6581    BFD_RELOC_LM32_CALL
6582 ENUMX
6583    BFD_RELOC_LM32_BRANCH
6584 ENUMX
6585    BFD_RELOC_LM32_16_GOT
6586 ENUMX
6587    BFD_RELOC_LM32_GOTOFF_HI16
6588 ENUMX
6589    BFD_RELOC_LM32_GOTOFF_LO16
6590 ENUMX
6591    BFD_RELOC_LM32_COPY
6592 ENUMX
6593    BFD_RELOC_LM32_GLOB_DAT
6594 ENUMX
6595    BFD_RELOC_LM32_JMP_SLOT
6596 ENUMX
6597    BFD_RELOC_LM32_RELATIVE
6598 ENUMDOC
6599  Lattice Mico32 relocations.
6600
6601 ENUM
6602   BFD_RELOC_MACH_O_SECTDIFF
6603 ENUMDOC
6604   Difference between two section addreses.  Must be followed by a
6605   BFD_RELOC_MACH_O_PAIR.
6606 ENUM
6607   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6608 ENUMDOC
6609   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6610 ENUM
6611   BFD_RELOC_MACH_O_PAIR
6612 ENUMDOC
6613   Pair of relocation.  Contains the first symbol.
6614 ENUM
6615   BFD_RELOC_MACH_O_SUBTRACTOR32
6616 ENUMDOC
6617   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6618 ENUM
6619   BFD_RELOC_MACH_O_SUBTRACTOR64
6620 ENUMDOC
6621   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6622
6623 ENUM
6624   BFD_RELOC_MACH_O_X86_64_BRANCH32
6625 ENUMX
6626   BFD_RELOC_MACH_O_X86_64_BRANCH8
6627 ENUMDOC
6628   PCREL relocations.  They are marked as branch to create PLT entry if
6629   required.
6630 ENUM
6631   BFD_RELOC_MACH_O_X86_64_GOT
6632 ENUMDOC
6633   Used when referencing a GOT entry.
6634 ENUM
6635   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6636 ENUMDOC
6637   Used when loading a GOT entry with movq.  It is specially marked so that
6638   the linker could optimize the movq to a leaq if possible.
6639 ENUM
6640   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6641 ENUMDOC
6642   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6643 ENUM
6644   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6645 ENUMDOC
6646   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6647 ENUM
6648   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6649 ENUMDOC
6650   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6651
6652
6653 ENUM
6654   BFD_RELOC_MACH_O_ARM64_ADDEND
6655 ENUMDOC
6656   Addend for PAGE or PAGEOFF.
6657 ENUM
6658   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6659 ENUMDOC
6660   Relative offset to page of GOT slot.
6661 ENUM
6662   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6663 ENUMDOC
6664   Relative offset within page of GOT slot.
6665 ENUM
6666   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6667 ENUMDOC
6668   Address of a GOT entry.
6669
6670 ENUM
6671   BFD_RELOC_MICROBLAZE_32_LO
6672 ENUMDOC
6673   This is a 32 bit reloc for the microblaze that stores the
6674   low 16 bits of a value
6675 ENUM
6676   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6677 ENUMDOC
6678   This is a 32 bit pc-relative reloc for the microblaze that
6679   stores the low 16 bits of a value
6680 ENUM
6681   BFD_RELOC_MICROBLAZE_32_ROSDA
6682 ENUMDOC
6683   This is a 32 bit reloc for the microblaze that stores a
6684   value relative to the read-only small data area anchor
6685 ENUM
6686   BFD_RELOC_MICROBLAZE_32_RWSDA
6687 ENUMDOC
6688   This is a 32 bit reloc for the microblaze that stores a
6689   value relative to the read-write small data area anchor
6690 ENUM
6691   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6692 ENUMDOC
6693   This is a 32 bit reloc for the microblaze to handle
6694   expressions of the form "Symbol Op Symbol"
6695 ENUM
6696   BFD_RELOC_MICROBLAZE_64_NONE
6697 ENUMDOC
6698   This is a 64 bit reloc that stores the 32 bit pc relative
6699   value in two words (with an imm instruction).  No relocation is
6700   done here - only used for relaxing
6701 ENUM
6702   BFD_RELOC_MICROBLAZE_64_GOTPC
6703 ENUMDOC
6704   This is a 64 bit reloc that stores the 32 bit pc relative
6705   value in two words (with an imm instruction).  The relocation is
6706   PC-relative GOT offset
6707 ENUM
6708   BFD_RELOC_MICROBLAZE_64_GOT
6709 ENUMDOC
6710   This is a 64 bit reloc that stores the 32 bit pc relative
6711   value in two words (with an imm instruction).  The relocation is
6712   GOT offset
6713 ENUM
6714   BFD_RELOC_MICROBLAZE_64_PLT
6715 ENUMDOC
6716   This is a 64 bit reloc that stores the 32 bit pc relative
6717   value in two words (with an imm instruction).  The relocation is
6718   PC-relative offset into PLT
6719 ENUM
6720   BFD_RELOC_MICROBLAZE_64_GOTOFF
6721 ENUMDOC
6722   This is a 64 bit reloc that stores the 32 bit GOT relative
6723   value in two words (with an imm instruction).  The relocation is
6724   relative offset from _GLOBAL_OFFSET_TABLE_
6725 ENUM
6726   BFD_RELOC_MICROBLAZE_32_GOTOFF
6727 ENUMDOC
6728   This is a 32 bit reloc that stores the 32 bit GOT relative
6729   value in a word.  The relocation is relative offset from
6730   _GLOBAL_OFFSET_TABLE_
6731 ENUM
6732   BFD_RELOC_MICROBLAZE_COPY
6733 ENUMDOC
6734   This is used to tell the dynamic linker to copy the value out of
6735   the dynamic object into the runtime process image.
6736 ENUM
6737   BFD_RELOC_MICROBLAZE_64_TLS
6738 ENUMDOC
6739   Unused Reloc
6740 ENUM
6741   BFD_RELOC_MICROBLAZE_64_TLSGD
6742 ENUMDOC
6743   This is a 64 bit reloc that stores the 32 bit GOT relative value
6744   of the GOT TLS GD info entry in two words (with an imm instruction). The
6745   relocation is GOT offset.
6746 ENUM
6747   BFD_RELOC_MICROBLAZE_64_TLSLD
6748 ENUMDOC
6749   This is a 64 bit reloc that stores the 32 bit GOT relative value
6750   of the GOT TLS LD info entry in two words (with an imm instruction). The
6751   relocation is GOT offset.
6752 ENUM
6753   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6754 ENUMDOC
6755   This is a 32 bit reloc that stores the Module ID to GOT(n).
6756 ENUM
6757   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6758 ENUMDOC
6759   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6760 ENUM
6761   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6762 ENUMDOC
6763   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6764   instruction)
6765 ENUM
6766   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6767 ENUMDOC
6768   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6769   to two words (uses imm instruction).
6770 ENUM
6771   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6772 ENUMDOC
6773   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6774   to two words (uses imm instruction).
6775
6776 ENUM
6777   BFD_RELOC_AARCH64_RELOC_START
6778 ENUMDOC
6779   AArch64 pseudo relocation code to mark the start of the AArch64
6780   relocation enumerators.  N.B. the order of the enumerators is
6781   important as several tables in the AArch64 bfd backend are indexed
6782   by these enumerators; make sure they are all synced.
6783 ENUM
6784   BFD_RELOC_AARCH64_NULL
6785 ENUMDOC
6786   Deprecated AArch64 null relocation code.
6787 ENUM
6788   BFD_RELOC_AARCH64_NONE
6789 ENUMDOC
6790   AArch64 null relocation code.
6791 ENUM
6792   BFD_RELOC_AARCH64_64
6793 ENUMX
6794   BFD_RELOC_AARCH64_32
6795 ENUMX
6796   BFD_RELOC_AARCH64_16
6797 ENUMDOC
6798   Basic absolute relocations of N bits.  These are equivalent to
6799 BFD_RELOC_N and they were added to assist the indexing of the howto
6800 table.
6801 ENUM
6802   BFD_RELOC_AARCH64_64_PCREL
6803 ENUMX
6804   BFD_RELOC_AARCH64_32_PCREL
6805 ENUMX
6806   BFD_RELOC_AARCH64_16_PCREL
6807 ENUMDOC
6808   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6809 and they were added to assist the indexing of the howto table.
6810 ENUM
6811   BFD_RELOC_AARCH64_MOVW_G0
6812 ENUMDOC
6813   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6814   of an unsigned address/value.
6815 ENUM
6816   BFD_RELOC_AARCH64_MOVW_G0_NC
6817 ENUMDOC
6818   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6819   an address/value.  No overflow checking.
6820 ENUM
6821   BFD_RELOC_AARCH64_MOVW_G1
6822 ENUMDOC
6823   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6824   of an unsigned address/value.
6825 ENUM
6826   BFD_RELOC_AARCH64_MOVW_G1_NC
6827 ENUMDOC
6828   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6829   of an address/value.  No overflow checking.
6830 ENUM
6831   BFD_RELOC_AARCH64_MOVW_G2
6832 ENUMDOC
6833   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6834   of an unsigned address/value.
6835 ENUM
6836   BFD_RELOC_AARCH64_MOVW_G2_NC
6837 ENUMDOC
6838   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6839   of an address/value.  No overflow checking.
6840 ENUM
6841   BFD_RELOC_AARCH64_MOVW_G3
6842 ENUMDOC
6843   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6844   of a signed or unsigned address/value.
6845 ENUM
6846   BFD_RELOC_AARCH64_MOVW_G0_S
6847 ENUMDOC
6848   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6849   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6850   value's sign.
6851 ENUM
6852   BFD_RELOC_AARCH64_MOVW_G1_S
6853 ENUMDOC
6854   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6855   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6856   value's sign.
6857 ENUM
6858   BFD_RELOC_AARCH64_MOVW_G2_S
6859 ENUMDOC
6860   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6861   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6862   value's sign.
6863 ENUM
6864   BFD_RELOC_AARCH64_LD_LO19_PCREL
6865 ENUMDOC
6866   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6867   offset.  The lowest two bits must be zero and are not stored in the
6868   instruction, giving a 21 bit signed byte offset.
6869 ENUM
6870   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6871 ENUMDOC
6872   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6873 ENUM
6874   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6875 ENUMDOC
6876   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6877   offset, giving a 4KB aligned page base address.
6878 ENUM
6879   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6880 ENUMDOC
6881   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6882   offset, giving a 4KB aligned page base address, but with no overflow
6883   checking.
6884 ENUM
6885   BFD_RELOC_AARCH64_ADD_LO12
6886 ENUMDOC
6887   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6888   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6889 ENUM
6890   BFD_RELOC_AARCH64_LDST8_LO12
6891 ENUMDOC
6892   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6893   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6894 ENUM
6895   BFD_RELOC_AARCH64_TSTBR14
6896 ENUMDOC
6897   AArch64 14 bit pc-relative test bit and branch.
6898   The lowest two bits must be zero and are not stored in the instruction,
6899   giving a 16 bit signed byte offset.
6900 ENUM
6901   BFD_RELOC_AARCH64_BRANCH19
6902 ENUMDOC
6903   AArch64 19 bit pc-relative conditional branch and compare & branch.
6904   The lowest two bits must be zero and are not stored in the instruction,
6905   giving a 21 bit signed byte offset.
6906 ENUM
6907   BFD_RELOC_AARCH64_JUMP26
6908 ENUMDOC
6909   AArch64 26 bit pc-relative unconditional branch.
6910   The lowest two bits must be zero and are not stored in the instruction,
6911   giving a 28 bit signed byte offset.
6912 ENUM
6913   BFD_RELOC_AARCH64_CALL26
6914 ENUMDOC
6915   AArch64 26 bit pc-relative unconditional branch and link.
6916   The lowest two bits must be zero and are not stored in the instruction,
6917   giving a 28 bit signed byte offset.
6918 ENUM
6919   BFD_RELOC_AARCH64_LDST16_LO12
6920 ENUMDOC
6921   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6922   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6923 ENUM
6924   BFD_RELOC_AARCH64_LDST32_LO12
6925 ENUMDOC
6926   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6927   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6928 ENUM
6929   BFD_RELOC_AARCH64_LDST64_LO12
6930 ENUMDOC
6931   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6932   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6933 ENUM
6934   BFD_RELOC_AARCH64_LDST128_LO12
6935 ENUMDOC
6936   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6937   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6938 ENUM
6939   BFD_RELOC_AARCH64_GOT_LD_PREL19
6940 ENUMDOC
6941   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6942   offset of the global offset table entry for a symbol.  The lowest two
6943   bits must be zero and are not stored in the instruction, giving a 21
6944   bit signed byte offset.  This relocation type requires signed overflow
6945   checking.
6946 ENUM
6947   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6948 ENUMDOC
6949   Get to the page base of the global offset table entry for a symbol as
6950   part of an ADRP instruction using a 21 bit PC relative value.Used in
6951   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6952 ENUM
6953   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6954 ENUMDOC
6955   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6956   the GOT entry for this symbol.  Used in conjunction with
6957   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6958 ENUM
6959   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6960 ENUMDOC
6961   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6962   the GOT entry for this symbol.  Used in conjunction with
6963   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6964  ENUM
6965   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
6966 ENUMDOC
6967   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
6968   for this symbol.  Valid in LP64 ABI only.
6969 ENUM
6970   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
6971 ENUMDOC
6972   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
6973   for this symbol.  Valid in LP64 ABI only.
6974 ENUM
6975   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
6976 ENUMDOC
6977   Unsigned 15 bit byte offset for 64 bit load/store from the page of
6978   the GOT entry for this symbol.  Valid in LP64 ABI only.
6979 ENUM
6980   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
6981 ENUMDOC
6982   Scaled 14 bit byte offset to the page base of the global offset table.
6983 ENUM
6984   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
6985 ENUMDOC
6986   Scaled 15 bit byte offset to the page base of the global offset table.
6987 ENUM
6988   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6989 ENUMDOC
6990   Get to the page base of the global offset table entry for a symbols
6991   tls_index structure as part of an adrp instruction using a 21 bit PC
6992   relative value.  Used in conjunction with
6993   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6994 ENUM
6995   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
6996 ENUMDOC
6997   AArch64 TLS General Dynamic
6998 ENUM
6999   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7000 ENUMDOC
7001   Unsigned 12 bit byte offset to global offset table entry for a symbols
7002   tls_index structure.  Used in conjunction with
7003   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7004 ENUM
7005   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7006 ENUMDOC
7007   AArch64 TLS General Dynamic relocation.
7008 ENUM
7009   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7010 ENUMDOC
7011   AArch64 TLS General Dynamic relocation.
7012 ENUM
7013   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7014 ENUMDOC
7015   AArch64 TLS INITIAL EXEC relocation.
7016 ENUM
7017   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7018 ENUMDOC
7019   AArch64 TLS INITIAL EXEC relocation.
7020 ENUM
7021   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7022 ENUMDOC
7023   AArch64 TLS INITIAL EXEC relocation.
7024 ENUM
7025   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7026 ENUMDOC
7027   AArch64 TLS INITIAL EXEC relocation.
7028 ENUM
7029   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7030 ENUMDOC
7031   AArch64 TLS INITIAL EXEC relocation.
7032 ENUM
7033   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7034 ENUMDOC
7035   AArch64 TLS INITIAL EXEC relocation.
7036 ENUM
7037   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7038 ENUMDOC
7039   bit[23:12] of byte offset to module TLS base address.
7040 ENUM
7041   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7042 ENUMDOC
7043   Unsigned 12 bit byte offset to module TLS base address.
7044 ENUM
7045   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7046 ENUMDOC
7047   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7048 ENUM
7049   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7050 ENUMDOC
7051   Unsigned 12 bit byte offset to global offset table entry for a symbols
7052   tls_index structure.  Used in conjunction with
7053   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7054 ENUM
7055   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7056 ENUMDOC
7057   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7058   instruction.
7059 ENUM
7060   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7061 ENUMDOC
7062   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7063 ENUM
7064   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7065 ENUMDOC
7066   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7067   instructions.
7068 ENUM
7069   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7070 ENUMDOC
7071   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7072 ENUM
7073   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7074 ENUMDOC
7075   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7076   instructions.
7077 ENUM
7078   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7079 ENUMDOC
7080   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7081 ENUM
7082   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7083 ENUMDOC
7084   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7085   instructions.
7086 ENUM
7087   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7088 ENUMDOC
7089   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7090 ENUM
7091   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7092 ENUMDOC
7093   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7094   instructions.
7095 ENUM
7096   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7097 ENUMDOC
7098   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7099 ENUM
7100   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7101 ENUMDOC
7102   bit[15:0] of byte offset to module TLS base address.
7103 ENUM
7104   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7105 ENUMDOC
7106   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7107 ENUM
7108   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7109 ENUMDOC
7110   bit[31:16] of byte offset to module TLS base address.
7111 ENUM
7112   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7113 ENUMDOC
7114   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7115 ENUM
7116   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7117 ENUMDOC
7118   bit[47:32] of byte offset to module TLS base address.
7119 ENUM
7120   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7121 ENUMDOC
7122   AArch64 TLS LOCAL EXEC relocation.
7123 ENUM
7124   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7125 ENUMDOC
7126   AArch64 TLS LOCAL EXEC relocation.
7127 ENUM
7128   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7129 ENUMDOC
7130   AArch64 TLS LOCAL EXEC relocation.
7131 ENUM
7132   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7133 ENUMDOC
7134   AArch64 TLS LOCAL EXEC relocation.
7135 ENUM
7136   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7137 ENUMDOC
7138   AArch64 TLS LOCAL EXEC relocation.
7139 ENUM
7140   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7141 ENUMDOC
7142   AArch64 TLS LOCAL EXEC relocation.
7143 ENUM
7144   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7145 ENUMDOC
7146   AArch64 TLS LOCAL EXEC relocation.
7147 ENUM
7148   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7149 ENUMDOC
7150   AArch64 TLS LOCAL EXEC relocation.
7151 ENUM
7152   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7153 ENUMDOC
7154   AArch64 TLS DESC relocation.
7155 ENUM
7156   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7157 ENUMDOC
7158   AArch64 TLS DESC relocation.
7159 ENUM
7160   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7161 ENUMDOC
7162   AArch64 TLS DESC relocation.
7163 ENUM
7164   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
7165 ENUMDOC
7166   AArch64 TLS DESC relocation.
7167 ENUM
7168   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7169 ENUMDOC
7170   AArch64 TLS DESC relocation.
7171 ENUM
7172   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
7173 ENUMDOC
7174   AArch64 TLS DESC relocation.
7175 ENUM
7176   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7177 ENUMDOC
7178   AArch64 TLS DESC relocation.
7179 ENUM
7180   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7181 ENUMDOC
7182   AArch64 TLS DESC relocation.
7183 ENUM
7184   BFD_RELOC_AARCH64_TLSDESC_LDR
7185 ENUMDOC
7186   AArch64 TLS DESC relocation.
7187 ENUM
7188   BFD_RELOC_AARCH64_TLSDESC_ADD
7189 ENUMDOC
7190   AArch64 TLS DESC relocation.
7191 ENUM
7192   BFD_RELOC_AARCH64_TLSDESC_CALL
7193 ENUMDOC
7194   AArch64 TLS DESC relocation.
7195 ENUM
7196   BFD_RELOC_AARCH64_COPY
7197 ENUMDOC
7198   AArch64 TLS relocation.
7199 ENUM
7200   BFD_RELOC_AARCH64_GLOB_DAT
7201 ENUMDOC
7202   AArch64 TLS relocation.
7203 ENUM
7204   BFD_RELOC_AARCH64_JUMP_SLOT
7205 ENUMDOC
7206   AArch64 TLS relocation.
7207 ENUM
7208   BFD_RELOC_AARCH64_RELATIVE
7209 ENUMDOC
7210   AArch64 TLS relocation.
7211 ENUM
7212   BFD_RELOC_AARCH64_TLS_DTPMOD
7213 ENUMDOC
7214   AArch64 TLS relocation.
7215 ENUM
7216   BFD_RELOC_AARCH64_TLS_DTPREL
7217 ENUMDOC
7218   AArch64 TLS relocation.
7219 ENUM
7220   BFD_RELOC_AARCH64_TLS_TPREL
7221 ENUMDOC
7222   AArch64 TLS relocation.
7223 ENUM
7224   BFD_RELOC_AARCH64_TLSDESC
7225 ENUMDOC
7226   AArch64 TLS relocation.
7227 ENUM
7228   BFD_RELOC_AARCH64_IRELATIVE
7229 ENUMDOC
7230   AArch64 support for STT_GNU_IFUNC.
7231 ENUM
7232   BFD_RELOC_AARCH64_RELOC_END
7233 ENUMDOC
7234   AArch64 pseudo relocation code to mark the end of the AArch64
7235   relocation enumerators that have direct mapping to ELF reloc codes.
7236   There are a few more enumerators after this one; those are mainly
7237   used by the AArch64 assembler for the internal fixup or to select
7238   one of the above enumerators.
7239 ENUM
7240   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7241 ENUMDOC
7242   AArch64 pseudo relocation code to be used internally by the AArch64
7243   assembler and not (currently) written to any object files.
7244 ENUM
7245   BFD_RELOC_AARCH64_LDST_LO12
7246 ENUMDOC
7247   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7248   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7249 ENUM
7250   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7251 ENUMDOC
7252   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7253   used internally by the AArch64 assembler and not (currently) written to
7254   any object files.
7255 ENUM
7256   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7257 ENUMDOC
7258   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7259 ENUM
7260   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7261 ENUMDOC
7262   AArch64 pseudo relocation code to be used internally by the AArch64
7263   assembler and not (currently) written to any object files.
7264 ENUM
7265   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7266 ENUMDOC
7267   AArch64 pseudo relocation code to be used internally by the AArch64
7268   assembler and not (currently) written to any object files.
7269 ENUM
7270   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7271 ENUMDOC
7272   AArch64 pseudo relocation code to be used internally by the AArch64
7273   assembler and not (currently) written to any object files.
7274 ENUM
7275   BFD_RELOC_TILEPRO_COPY
7276 ENUMX
7277   BFD_RELOC_TILEPRO_GLOB_DAT
7278 ENUMX
7279   BFD_RELOC_TILEPRO_JMP_SLOT
7280 ENUMX
7281   BFD_RELOC_TILEPRO_RELATIVE
7282 ENUMX
7283   BFD_RELOC_TILEPRO_BROFF_X1
7284 ENUMX
7285   BFD_RELOC_TILEPRO_JOFFLONG_X1
7286 ENUMX
7287   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7288 ENUMX
7289   BFD_RELOC_TILEPRO_IMM8_X0
7290 ENUMX
7291   BFD_RELOC_TILEPRO_IMM8_Y0
7292 ENUMX
7293   BFD_RELOC_TILEPRO_IMM8_X1
7294 ENUMX
7295   BFD_RELOC_TILEPRO_IMM8_Y1
7296 ENUMX
7297   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7298 ENUMX
7299   BFD_RELOC_TILEPRO_MT_IMM15_X1
7300 ENUMX
7301   BFD_RELOC_TILEPRO_MF_IMM15_X1
7302 ENUMX
7303   BFD_RELOC_TILEPRO_IMM16_X0
7304 ENUMX
7305   BFD_RELOC_TILEPRO_IMM16_X1
7306 ENUMX
7307   BFD_RELOC_TILEPRO_IMM16_X0_LO
7308 ENUMX
7309   BFD_RELOC_TILEPRO_IMM16_X1_LO
7310 ENUMX
7311   BFD_RELOC_TILEPRO_IMM16_X0_HI
7312 ENUMX
7313   BFD_RELOC_TILEPRO_IMM16_X1_HI
7314 ENUMX
7315   BFD_RELOC_TILEPRO_IMM16_X0_HA
7316 ENUMX
7317   BFD_RELOC_TILEPRO_IMM16_X1_HA
7318 ENUMX
7319   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7320 ENUMX
7321   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7322 ENUMX
7323   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7324 ENUMX
7325   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7326 ENUMX
7327   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7328 ENUMX
7329   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7330 ENUMX
7331   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7332 ENUMX
7333   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7334 ENUMX
7335   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7336 ENUMX
7337   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7338 ENUMX
7339   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7340 ENUMX
7341   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7342 ENUMX
7343   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7344 ENUMX
7345   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7346 ENUMX
7347   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7348 ENUMX
7349   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7350 ENUMX
7351   BFD_RELOC_TILEPRO_MMSTART_X0
7352 ENUMX
7353   BFD_RELOC_TILEPRO_MMEND_X0
7354 ENUMX
7355   BFD_RELOC_TILEPRO_MMSTART_X1
7356 ENUMX
7357   BFD_RELOC_TILEPRO_MMEND_X1
7358 ENUMX
7359   BFD_RELOC_TILEPRO_SHAMT_X0
7360 ENUMX
7361   BFD_RELOC_TILEPRO_SHAMT_X1
7362 ENUMX
7363   BFD_RELOC_TILEPRO_SHAMT_Y0
7364 ENUMX
7365   BFD_RELOC_TILEPRO_SHAMT_Y1
7366 ENUMX
7367   BFD_RELOC_TILEPRO_TLS_GD_CALL
7368 ENUMX
7369   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7370 ENUMX
7371   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7372 ENUMX
7373   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7374 ENUMX
7375   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7376 ENUMX
7377   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7378 ENUMX
7379   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7380 ENUMX
7381   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7382 ENUMX
7383   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7384 ENUMX
7385   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7386 ENUMX
7387   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7388 ENUMX
7389   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7390 ENUMX
7391   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7392 ENUMX
7393   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7394 ENUMX
7395   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7396 ENUMX
7397   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7398 ENUMX
7399   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7400 ENUMX
7401   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7402 ENUMX
7403   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7404 ENUMX
7405   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7406 ENUMX
7407   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7408 ENUMX
7409   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7410 ENUMX
7411   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7412 ENUMX
7413   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7414 ENUMX
7415   BFD_RELOC_TILEPRO_TLS_TPOFF32
7416 ENUMX
7417   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7418 ENUMX
7419   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7420 ENUMX
7421   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7422 ENUMX
7423   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7424 ENUMX
7425   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7426 ENUMX
7427   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7428 ENUMX
7429   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7430 ENUMX
7431   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7432 ENUMDOC
7433   Tilera TILEPro Relocations.
7434 ENUM
7435   BFD_RELOC_TILEGX_HW0
7436 ENUMX
7437   BFD_RELOC_TILEGX_HW1
7438 ENUMX
7439   BFD_RELOC_TILEGX_HW2
7440 ENUMX
7441   BFD_RELOC_TILEGX_HW3
7442 ENUMX
7443   BFD_RELOC_TILEGX_HW0_LAST
7444 ENUMX
7445   BFD_RELOC_TILEGX_HW1_LAST
7446 ENUMX
7447   BFD_RELOC_TILEGX_HW2_LAST
7448 ENUMX
7449   BFD_RELOC_TILEGX_COPY
7450 ENUMX
7451   BFD_RELOC_TILEGX_GLOB_DAT
7452 ENUMX
7453   BFD_RELOC_TILEGX_JMP_SLOT
7454 ENUMX
7455   BFD_RELOC_TILEGX_RELATIVE
7456 ENUMX
7457   BFD_RELOC_TILEGX_BROFF_X1
7458 ENUMX
7459   BFD_RELOC_TILEGX_JUMPOFF_X1
7460 ENUMX
7461   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7462 ENUMX
7463   BFD_RELOC_TILEGX_IMM8_X0
7464 ENUMX
7465   BFD_RELOC_TILEGX_IMM8_Y0
7466 ENUMX
7467   BFD_RELOC_TILEGX_IMM8_X1
7468 ENUMX
7469   BFD_RELOC_TILEGX_IMM8_Y1
7470 ENUMX
7471   BFD_RELOC_TILEGX_DEST_IMM8_X1
7472 ENUMX
7473   BFD_RELOC_TILEGX_MT_IMM14_X1
7474 ENUMX
7475   BFD_RELOC_TILEGX_MF_IMM14_X1
7476 ENUMX
7477   BFD_RELOC_TILEGX_MMSTART_X0
7478 ENUMX
7479   BFD_RELOC_TILEGX_MMEND_X0
7480 ENUMX
7481   BFD_RELOC_TILEGX_SHAMT_X0
7482 ENUMX
7483   BFD_RELOC_TILEGX_SHAMT_X1
7484 ENUMX
7485   BFD_RELOC_TILEGX_SHAMT_Y0
7486 ENUMX
7487   BFD_RELOC_TILEGX_SHAMT_Y1
7488 ENUMX
7489   BFD_RELOC_TILEGX_IMM16_X0_HW0
7490 ENUMX
7491   BFD_RELOC_TILEGX_IMM16_X1_HW0
7492 ENUMX
7493   BFD_RELOC_TILEGX_IMM16_X0_HW1
7494 ENUMX
7495   BFD_RELOC_TILEGX_IMM16_X1_HW1
7496 ENUMX
7497   BFD_RELOC_TILEGX_IMM16_X0_HW2
7498 ENUMX
7499   BFD_RELOC_TILEGX_IMM16_X1_HW2
7500 ENUMX
7501   BFD_RELOC_TILEGX_IMM16_X0_HW3
7502 ENUMX
7503   BFD_RELOC_TILEGX_IMM16_X1_HW3
7504 ENUMX
7505   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7506 ENUMX
7507   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7508 ENUMX
7509   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7510 ENUMX
7511   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7512 ENUMX
7513   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7514 ENUMX
7515   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7516 ENUMX
7517   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7518 ENUMX
7519   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7520 ENUMX
7521   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7522 ENUMX
7523   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7524 ENUMX
7525   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7526 ENUMX
7527   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7528 ENUMX
7529   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7530 ENUMX
7531   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7532 ENUMX
7533   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7534 ENUMX
7535   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7536 ENUMX
7537   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7538 ENUMX
7539   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7540 ENUMX
7541   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7542 ENUMX
7543   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7544 ENUMX
7545   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7546 ENUMX
7547   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7548 ENUMX
7549   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7550 ENUMX
7551   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7552 ENUMX
7553   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7554 ENUMX
7555   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7556 ENUMX
7557   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7558 ENUMX
7559   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7560 ENUMX
7561   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7562 ENUMX
7563   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7564 ENUMX
7565   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7566 ENUMX
7567   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7568 ENUMX
7569   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7570 ENUMX
7571   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7572 ENUMX
7573   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7574 ENUMX
7575   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7576 ENUMX
7577   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7578 ENUMX
7579   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7580 ENUMX
7581   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7582 ENUMX
7583   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7584 ENUMX
7585   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7586 ENUMX
7587   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7588 ENUMX
7589   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7590 ENUMX
7591   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7592 ENUMX
7593   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7594 ENUMX
7595   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7596 ENUMX
7597   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7598 ENUMX
7599   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7600 ENUMX
7601   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7602 ENUMX
7603   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7604 ENUMX
7605   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7606 ENUMX
7607   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7608 ENUMX
7609   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7610 ENUMX
7611   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7612 ENUMX
7613   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7614 ENUMX
7615   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7616 ENUMX
7617   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7618 ENUMX
7619   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7620 ENUMX
7621   BFD_RELOC_TILEGX_TLS_DTPMOD64
7622 ENUMX
7623   BFD_RELOC_TILEGX_TLS_DTPOFF64
7624 ENUMX
7625   BFD_RELOC_TILEGX_TLS_TPOFF64
7626 ENUMX
7627   BFD_RELOC_TILEGX_TLS_DTPMOD32
7628 ENUMX
7629   BFD_RELOC_TILEGX_TLS_DTPOFF32
7630 ENUMX
7631   BFD_RELOC_TILEGX_TLS_TPOFF32
7632 ENUMX
7633   BFD_RELOC_TILEGX_TLS_GD_CALL
7634 ENUMX
7635   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7636 ENUMX
7637   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7638 ENUMX
7639   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7640 ENUMX
7641   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7642 ENUMX
7643   BFD_RELOC_TILEGX_TLS_IE_LOAD
7644 ENUMX
7645   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7646 ENUMX
7647   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7648 ENUMX
7649   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7650 ENUMX
7651   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7652 ENUMDOC
7653   Tilera TILE-Gx Relocations.
7654
7655 ENUM
7656   BFD_RELOC_EPIPHANY_SIMM8
7657 ENUMDOC
7658   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7659 ENUM
7660   BFD_RELOC_EPIPHANY_SIMM24
7661 ENUMDOC
7662   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7663 ENUM
7664   BFD_RELOC_EPIPHANY_HIGH
7665 ENUMDOC
7666   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7667 ENUM
7668   BFD_RELOC_EPIPHANY_LOW
7669 ENUMDOC
7670   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7671 ENUM
7672   BFD_RELOC_EPIPHANY_SIMM11
7673 ENUMDOC
7674   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7675 ENUM
7676   BFD_RELOC_EPIPHANY_IMM11
7677 ENUMDOC
7678   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7679 ENUM
7680   BFD_RELOC_EPIPHANY_IMM8
7681 ENUMDOC
7682   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7683
7684 ENUM
7685   BFD_RELOC_VISIUM_HI16
7686 ENUMX
7687   BFD_RELOC_VISIUM_LO16
7688 ENUMX
7689   BFD_RELOC_VISIUM_IM16
7690 ENUMX
7691   BFD_RELOC_VISIUM_REL16
7692 ENUMX
7693   BFD_RELOC_VISIUM_HI16_PCREL
7694 ENUMX
7695   BFD_RELOC_VISIUM_LO16_PCREL
7696 ENUMX
7697   BFD_RELOC_VISIUM_IM16_PCREL
7698 ENUMDOC
7699   Visium Relocations.
7700
7701 ENDSENUM
7702   BFD_RELOC_UNUSED
7703 CODE_FRAGMENT
7704 .
7705 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7706 */
7707
7708 /*
7709 FUNCTION
7710         bfd_reloc_type_lookup
7711         bfd_reloc_name_lookup
7712
7713 SYNOPSIS
7714         reloc_howto_type *bfd_reloc_type_lookup
7715           (bfd *abfd, bfd_reloc_code_real_type code);
7716         reloc_howto_type *bfd_reloc_name_lookup
7717           (bfd *abfd, const char *reloc_name);
7718
7719 DESCRIPTION
7720         Return a pointer to a howto structure which, when
7721         invoked, will perform the relocation @var{code} on data from the
7722         architecture noted.
7723
7724 */
7725
7726 reloc_howto_type *
7727 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7728 {
7729   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7730 }
7731
7732 reloc_howto_type *
7733 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7734 {
7735   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7736 }
7737
7738 static reloc_howto_type bfd_howto_32 =
7739 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7740
7741 /*
7742 INTERNAL_FUNCTION
7743         bfd_default_reloc_type_lookup
7744
7745 SYNOPSIS
7746         reloc_howto_type *bfd_default_reloc_type_lookup
7747           (bfd *abfd, bfd_reloc_code_real_type  code);
7748
7749 DESCRIPTION
7750         Provides a default relocation lookup routine for any architecture.
7751
7752 */
7753
7754 reloc_howto_type *
7755 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7756 {
7757   switch (code)
7758     {
7759     case BFD_RELOC_CTOR:
7760       /* The type of reloc used in a ctor, which will be as wide as the
7761          address - so either a 64, 32, or 16 bitter.  */
7762       switch (bfd_arch_bits_per_address (abfd))
7763         {
7764         case 64:
7765           BFD_FAIL ();
7766         case 32:
7767           return &bfd_howto_32;
7768         case 16:
7769           BFD_FAIL ();
7770         default:
7771           BFD_FAIL ();
7772         }
7773     default:
7774       BFD_FAIL ();
7775     }
7776   return NULL;
7777 }
7778
7779 /*
7780 FUNCTION
7781         bfd_get_reloc_code_name
7782
7783 SYNOPSIS
7784         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7785
7786 DESCRIPTION
7787         Provides a printable name for the supplied relocation code.
7788         Useful mainly for printing error messages.
7789 */
7790
7791 const char *
7792 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7793 {
7794   if (code > BFD_RELOC_UNUSED)
7795     return 0;
7796   return bfd_reloc_code_real_names[code];
7797 }
7798
7799 /*
7800 INTERNAL_FUNCTION
7801         bfd_generic_relax_section
7802
7803 SYNOPSIS
7804         bfd_boolean bfd_generic_relax_section
7805           (bfd *abfd,
7806            asection *section,
7807            struct bfd_link_info *,
7808            bfd_boolean *);
7809
7810 DESCRIPTION
7811         Provides default handling for relaxing for back ends which
7812         don't do relaxing.
7813 */
7814
7815 bfd_boolean
7816 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7817                            asection *section ATTRIBUTE_UNUSED,
7818                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7819                            bfd_boolean *again)
7820 {
7821   if (bfd_link_relocatable (link_info))
7822     (*link_info->callbacks->einfo)
7823       (_("%P%F: --relax and -r may not be used together\n"));
7824
7825   *again = FALSE;
7826   return TRUE;
7827 }
7828
7829 /*
7830 INTERNAL_FUNCTION
7831         bfd_generic_gc_sections
7832
7833 SYNOPSIS
7834         bfd_boolean bfd_generic_gc_sections
7835           (bfd *, struct bfd_link_info *);
7836
7837 DESCRIPTION
7838         Provides default handling for relaxing for back ends which
7839         don't do section gc -- i.e., does nothing.
7840 */
7841
7842 bfd_boolean
7843 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7844                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7845 {
7846   return TRUE;
7847 }
7848
7849 /*
7850 INTERNAL_FUNCTION
7851         bfd_generic_lookup_section_flags
7852
7853 SYNOPSIS
7854         bfd_boolean bfd_generic_lookup_section_flags
7855           (struct bfd_link_info *, struct flag_info *, asection *);
7856
7857 DESCRIPTION
7858         Provides default handling for section flags lookup
7859         -- i.e., does nothing.
7860         Returns FALSE if the section should be omitted, otherwise TRUE.
7861 */
7862
7863 bfd_boolean
7864 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7865                                   struct flag_info *flaginfo,
7866                                   asection *section ATTRIBUTE_UNUSED)
7867 {
7868   if (flaginfo != NULL)
7869     {
7870       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7871       return FALSE;
7872     }
7873   return TRUE;
7874 }
7875
7876 /*
7877 INTERNAL_FUNCTION
7878         bfd_generic_merge_sections
7879
7880 SYNOPSIS
7881         bfd_boolean bfd_generic_merge_sections
7882           (bfd *, struct bfd_link_info *);
7883
7884 DESCRIPTION
7885         Provides default handling for SEC_MERGE section merging for back ends
7886         which don't have SEC_MERGE support -- i.e., does nothing.
7887 */
7888
7889 bfd_boolean
7890 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7891                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7892 {
7893   return TRUE;
7894 }
7895
7896 /*
7897 INTERNAL_FUNCTION
7898         bfd_generic_get_relocated_section_contents
7899
7900 SYNOPSIS
7901         bfd_byte *bfd_generic_get_relocated_section_contents
7902           (bfd *abfd,
7903            struct bfd_link_info *link_info,
7904            struct bfd_link_order *link_order,
7905            bfd_byte *data,
7906            bfd_boolean relocatable,
7907            asymbol **symbols);
7908
7909 DESCRIPTION
7910         Provides default handling of relocation effort for back ends
7911         which can't be bothered to do it efficiently.
7912
7913 */
7914
7915 bfd_byte *
7916 bfd_generic_get_relocated_section_contents (bfd *abfd,
7917                                             struct bfd_link_info *link_info,
7918                                             struct bfd_link_order *link_order,
7919                                             bfd_byte *data,
7920                                             bfd_boolean relocatable,
7921                                             asymbol **symbols)
7922 {
7923   bfd *input_bfd = link_order->u.indirect.section->owner;
7924   asection *input_section = link_order->u.indirect.section;
7925   long reloc_size;
7926   arelent **reloc_vector;
7927   long reloc_count;
7928
7929   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7930   if (reloc_size < 0)
7931     return NULL;
7932
7933   /* Read in the section.  */
7934   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7935     return NULL;
7936
7937   if (reloc_size == 0)
7938     return data;
7939
7940   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7941   if (reloc_vector == NULL)
7942     return NULL;
7943
7944   reloc_count = bfd_canonicalize_reloc (input_bfd,
7945                                         input_section,
7946                                         reloc_vector,
7947                                         symbols);
7948   if (reloc_count < 0)
7949     goto error_return;
7950
7951   if (reloc_count > 0)
7952     {
7953       arelent **parent;
7954
7955       for (parent = reloc_vector; *parent != NULL; parent++)
7956         {
7957           char *error_message = NULL;
7958           asymbol *symbol;
7959           bfd_reloc_status_type r;
7960
7961           symbol = *(*parent)->sym_ptr_ptr;
7962           /* PR ld/19628: A specially crafted input file
7963              can result in a NULL symbol pointer here.  */
7964           if (symbol == NULL)
7965             {
7966               link_info->callbacks->einfo
7967                 (_("%X%P: %B(%A): error: relocation for offset %V has no value\n"),
7968                  abfd, input_section, (* parent)->address);
7969               goto error_return;
7970             }
7971
7972           if (symbol->section && discarded_section (symbol->section))
7973             {
7974               bfd_byte *p;
7975               static reloc_howto_type none_howto
7976                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7977                          "unused", FALSE, 0, 0, FALSE);
7978
7979               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7980               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7981                                    p);
7982               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7983               (*parent)->addend = 0;
7984               (*parent)->howto = &none_howto;
7985               r = bfd_reloc_ok;
7986             }
7987           else
7988             r = bfd_perform_relocation (input_bfd,
7989                                         *parent,
7990                                         data,
7991                                         input_section,
7992                                         relocatable ? abfd : NULL,
7993                                         &error_message);
7994
7995           if (relocatable)
7996             {
7997               asection *os = input_section->output_section;
7998
7999               /* A partial link, so keep the relocs.  */
8000               os->orelocation[os->reloc_count] = *parent;
8001               os->reloc_count++;
8002             }
8003
8004           if (r != bfd_reloc_ok)
8005             {
8006               switch (r)
8007                 {
8008                 case bfd_reloc_undefined:
8009                   (*link_info->callbacks->undefined_symbol)
8010                     (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8011                      input_bfd, input_section, (*parent)->address, TRUE);
8012                   break;
8013                 case bfd_reloc_dangerous:
8014                   BFD_ASSERT (error_message != NULL);
8015                   (*link_info->callbacks->reloc_dangerous)
8016                     (link_info, error_message,
8017                      input_bfd, input_section, (*parent)->address);
8018                   break;
8019                 case bfd_reloc_overflow:
8020                   (*link_info->callbacks->reloc_overflow)
8021                     (link_info, NULL,
8022                      bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8023                      (*parent)->howto->name, (*parent)->addend,
8024                      input_bfd, input_section, (*parent)->address);
8025                   break;
8026                 case bfd_reloc_outofrange:
8027                   /* PR ld/13730:
8028                      This error can result when processing some partially
8029                      complete binaries.  Do not abort, but issue an error
8030                      message instead.  */
8031                   link_info->callbacks->einfo
8032                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
8033                      abfd, input_section, * parent);
8034                   goto error_return;
8035
8036                 case bfd_reloc_notsupported:
8037                   /* PR ld/17512
8038                      This error can result when processing a corrupt binary.
8039                      Do not abort.  Issue an error message instead.  */
8040                   link_info->callbacks->einfo
8041                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
8042                      abfd, input_section, * parent);
8043                   goto error_return;
8044
8045                 default:
8046                   /* PR 17512; file: 90c2a92e.
8047                      Report unexpected results, without aborting.  */
8048                   link_info->callbacks->einfo
8049                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
8050                      abfd, input_section, * parent, r);
8051                   break;
8052                 }
8053
8054             }
8055         }
8056     }
8057
8058   free (reloc_vector);
8059   return data;
8060
8061 error_return:
8062   free (reloc_vector);
8063   return NULL;
8064 }