binutils/ChangeLog

   1 2005-05-15  Daniel Jacobowitz  <dan@codesourcery.com>
   2
   3         * acinclude.m4: Remove obsolete code.
   4         * configure.in: Update AC_PREREQ.
   5         * doc/Makefile.am (binutils_TEXINFOS): Define.
   6         (config.texi): Depend on distributed files instead of built
   7         files.
   8         (binutils.dvi, binutils.info): Remove unnecessary rules.
   9         (DISTCLEANFILES): Remove.
  10         (install-data-local): Renamed from install.
  11         (info-local): Renamed from info.
  12         * Makefile.in, aclocal.m4, config.in, configure,
  13         doc/Makefile.in: Regenerated.
  14
  15 2005-05-14  Alan Modra  <amodra@bigpond.net.au>
  16
  17         * readelf.c (get_ppc_dynamic_type): Display DT_PPC_GOT, not
  18         DT_PPC_GLINK.
  19
  20 2005-05-13  Fred Fish  <fnf@specifixinc.com>
  21
  22         * readelf.c: Fix a couple of obvious comment typos,
  23         'debug_str' -> 'debug_ranges' and proecess' -> 'process'.
  24
  25 2005-05-13  H.J. Lu  <hongjiu.lu@intel.com>
  26
  27         * readelf.c (dump_ia64_unwind): Get stamp with proper size.
  28
  29 2005-05-12  Nick Clifton  <nickc@redhat.com>
  30
  31         * readelf.c (display_debug_lines): If pointer_size has not been
  32         found then assume that it is 4 in order to prevent a seg fault
  33         when process_extend_line_op attempts to read the line data.
  34
  35 2005-05-11  Alan Modra  <amodra@bigpond.net.au>
  36
  37         * readelf.c (get_ppc_dynamic_type): New function for DT_PPC_GLINK.
  38         (get_dynamic_type): Call the above.
  39
  40 2005-05-07  Nick Clifton  <nickc@redhat.com>
  41
  42         * Update the address and phone number of the FSF organization in
  43         the GPL notices in the following files:
  44         aclocal.m4, addr2line.c, ar.c, arlex.l, arparse.y, arsup.c,
  45         arsup.h, binemul.c, binemul.h, bucomm.c, bucomm.h, budbg.h,
  46         budemang.c, budemang.h, coffdump.c, coffgrok.c, coffgrok.h,
  47         cxxfilt.c, debug.c, debug.h, deflex.l, defparse.y, dlltool.c,
  48         dlltool.h, dllwrap.c, emul_aix.c, emul_vanilla.c, filemode.c,
  49         ieee.c, nlmconv.c, nlmconv.h, nlmheader.y, nm.c, objcopy.c,
  50         objdump.c, prdbg.c, rclex.l, rcparse.y, rdcoff.c, rddbg.c,
  51         readelf.c, rename.c, resbin.c, rescoff.c, resrc.c, resres.c,
  52         size.c, srconv.c, stabs.c, strings.c, sysdump.c, sysinfo.y,
  53         syslex.l, unwind-ia64.c, unwind-ia64.h, version.c, windres.c,
  54         windres.h, winduni.c, winduni.h wrstabs.c, doc/fdl.texi
  55
  56 2005-05-06  Jan Beulich  <jbeulich@novell.com>
  57
  58         * objcopy.c (copy_file): Don't delete output upon error here.
  59         (copy_main): Delete output upon error.
  60
  61 2005-05-02  Ben Elliston  <bje@au.ibm.com>
  62
  63         * dlltool.c (dtab): Remove empty function.
  64         (process_duplicates): Remove calls to dtab().
  65
  66 2005-05-01  Maciej W. Rozycki  <macro@linux-mips.org>
  67
  68         * doc/binutils.texi (strip, objcopy): Clarify the description of
  69         the "--strip-debug" option.  Fix a typo.
  70
  71 2005-04-29  H.J. Lu  <hongjiu.lu@intel.com>
  72
  73         * bucomm.c: Undo the last change.
  74         * bucomm.h: Likewise.
  75
  76 2005-04-29  Ben Elliston  <bje@au.ibm.com>
  77
  78         * syslex.l (word, number, unit): Remove unused variables.
  79         * nlmheader.y (keyword_tokens): Make static.
  80         * coffdump.c (dump_coff_symbol, coff_dump): Make static.
  81         * coffgrok.c (lofile, last_function_symbol, last_function_type,
  82         last_struct, last_enum, cur_sfile): Make variables static.
  83         * sysdump.c (getCHARS, fillup, getBARRAY, getINT, getBITS,
  84         sysroff_swap_tr_in, sysroff_print_tr_out): Make static.
  85         * sysinfo.y (writecode, it, code, repeat, oldrepeat, name, rdepth,
  86         names, pnames): Likewise.
  87
  88 2005-04-29  Ben Elliston  <bje@au.ibm.com>
  89
  90         * ar.c (mri_mode): Make static.
  91         * arsup.c (obfd, real_name, outfile): Likewise.
  92         * binemul.c (ar_emul_create): Remove unused function.
  93         (ar_emul_default_create): Likewise.
  94         * binemul.h (ar_emul_create): Remove declaration.
  95         (ar_emul_default_create): Likewise.
  96         (struct bin_emulation_xfer_struct): Remove ar_create member.
  97         * bucomm.c (report): Make static.
  98         * bucomm.h (report): Remove declaration.
  99         * cxxfilt.c (mbuffer): Make static.
 100         (main): Use unsigned ints for some loop control variables.
 101         * readelf.c: Make many global variables static.
 102         * size.c (berkeley_format): Make static.
 103         (long_options): Likewise.
 104         * emul_aix.c (bin_aix_emulation): Remove ar_emul_default_create
 105         structure initialiser.
 106         (bin_aix5_emulation): Likewise.
 107         * emul_vanilla.c (bin_vanilla_emulation): Likewise.
 108
 109 2005-04-27  Ben Elliston  <bje@au.ibm.com>
 110
 111         * syslex.l: Adjust top-of-file comment: this file is part of GNU
 112         binutils, not GNU ld.
 113
 114 2005-04-25  Nick Clifton  <nickc@redhat.com>
 115
 116         PR872
 117         * objcopy.c (copy_archive): Initialise 'obfd' field of new
 118         name_list structure.
 119
 120         * objcopy.c (copy_usage): Fix description of -K switch.
 121
 122         * doc/binutils.texi (strip, objcopy): Fix description of -K
 123         switch.
 124
 125 2005-04-20  Daniel Jacobowitz  <dan@codesourcery.com>
 126
 127         * readelf.c (display_debug_frames): Use data factor for
 128         DW_CFA_def_cfa_sf and DW_CFA_def_cfa_offset_sf.
 129
 130 2005-04-19  H.J. Lu  <hongjiu.lu@intel.com>
 131
 132         * objdump.c (dump_section_header): Skip linker created section.
 133
 134 2005-04-17  H.J. Lu  <hongjiu.lu@intel.com>
 135
 136         * objdump.c (dump_section_header): Support SEC_GROUP.
 137
 138 2005-04-16  Nick Clifton  <nickc@redhat.com>
 139
 140         * readelf.c (debug_apply_rela_addends): Remove redundant %s from
 141         printf string.
 142
 143 2005-04-15  Nick Clifton  <nickc@redhat.com>
 144
 145         * objcopy.c (copy_file): Issue an error message when attmepting to
 146         copy an empty input file.
 147
 148 2005-04-14  Alan Modra  <amodra@bigpond.net.au>
 149
 150         * Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
 151         * configure.in: Include ../bfd/warning.m4 contents.
 152         * Makefile.in: Regenerate.
 153         * configure: Regenerate.
 154         * doc/Makefile.in: Regenerate.
 155
 156 2005-04-12  Alan Modra  <amodra@bigpond.net.au>
 157
 158         * Makefile.am: Run "make dep-am".
 159         (syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
 160         (sysroff.o, defparse.o, deflex.o): Likewise.
 161         (nlmheader.o, rcparse.o, rclex.o): Likewise.
 162         * Makefile.in: Regenerate.
 163         * aclocal.m4: Regenerate.
 164         * config.in: Regenerate.
 165         * configure: Regenerate.
 166
 167 2005-04-11  Jan Beulich  <jbeulich@novell.com>
 168
 169         * MAINTAINERS: Add myself as ix86 Intel mode maintainer.
 170
 171 2005-04-06  Nick Clifton  <nickc@redhat.com>
 172             H.J. Lu  <hongjiu.lu@intel.com>
 173
 174         * po/rw.po: New translation: Kinyarwanda.
 175         * configure.in (ALL_LINGUAS): Add rw.
 176         * configure: Regenerate.
 177
 178 2005-04-04  Maciej W. Rozycki  <macro@linux-mips.org>
 179
 180         * readelf.c (debug_apply_rela_addends): Reorder r_info as
 181         necessary for 64-bit MIPS.
 182
 183 2005-04-04  Maciej W. Rozycki  <macro@linux-mips.org>
 184
 185         * doc/binutils.texi (readelf): Remove a duplicate paragraph.
 186
 187 2005-04-04  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>
 188
 189         PR binutils/813
 190         * objdump.c (dump_symbols): Add a check to see if the section for
 191         the symbol is chosen using process_section_p.
 192
 193 2005-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 194
 195         * NEWS: Mention new readelf options, "-N/--full-section-name"
 196         and "-g/--section-groups".
 197
 198         * doc/binutils.texi: Document new readelf options,
 199         "-N/--full-section-name" and "-g/--section-groups".
 200
 201 2005-03-31  H.J. Lu  <hongjiu.lu@intel.com>
 202
 203         * readelf.c (do_full_section_name): New.
 204         (options): Add "--full-section-name"/'N'.
 205         (usage): Add -N/--full-section-name.
 206         (parse_args): Handle 'N'.
 207         (process_section_headers): Print out the full section name if
 208         do_full_section_name isn't 0.
 209
 210 2005-03-31  Nick Clifton  <nickc@redhat.com>
 211
 212         * configure.in: Add a check for <unistd.h> providing a prototype
 213         for getopt() which is compatible with the one in
 214         include/getopt.h.  If so then define HAVE_DECL_GETOPT.
 215         * configure: Regenerate.
 216         * config.in (HAVE_DECL_GETOPT): Add.
 217         * aclocal.m4: Regenerate.
 218         * addr2line.c: Include "config.h" before "bfd.h" so that
 219         HAVE_DECL_GETOPT is defined before getopt.h is included.
 220
 221 2005-03-21  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
 222
 223         * doc/binutils.texi: Document new VAX disassembler-specific option
 224         -M entry:0xfooba8.
 225         * NEWS: Mention the new option.
 226
 227 2005-03-29  Anil Paranjpe  <anilp1@kpitcummins.com>
 228
 229         * MAINTAINERS: Add myself as H8300 maintainer.
 230
 231 2005-03-28  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
 232
 233         * objdump.c (disassemble_bytes): Remove cast.
 234
 235 2005-03-25  Daniel Jacobowitz  <dan@codesourcery.com>
 236
 237         * BRANCHES: Add binutils-csl-arm-2005q1-branch and
 238         binutils-2_16-branch.
 239
 240 2005-03-25  Mark Kettenis  <kettenis@gnu.org>
 241
 242         * MAINTAINERS: Add myself as M88k maintainer.
 243
 244 2005-03-24  Danny Smith  <dannysmith@users.sourceforge.net>
 245
 246         * winduni.c (unicode_from_ascii): Don't declare variables
 247         's' and 'w' if _WIN32.  Use MultiByteToWideChar to set the unicode
 248         string len.
 249
 250 2005-03-24  Dmitry Diky   <diwil@spec.ru>
 251
 252         * MAINTAINERS: Add myself as MSP430 maintainer.
 253
 254 2005-03-23  Nick Clifton  <nickc@redhat.com>
 255
 256         * po/fr.po: Updated translation.
 257
 258 2005-03-22  Nick Clifton  <nickc@redhat.com>
 259
 260         * MAINTAINERS: Add Daniel Jacobwitz to the blanket write
 261         privileges list.
 262
 263 2005-03-17  Paul Brook <paul@codesourcery.com>
 264             Dan Jacobowitz <dan@codesourcery.com>
 265             Mark Mitchell  <mark@codesourcery.com>
 266
 267         * binutils/readelf.c (get_arm_segment_type): New function.
 268         (get_segment_type): Use it.
 269
 270 2005-03-18  Paul Brook  <paul@codesourcery.com>
 271
 272         * objdump.c (objdump_print_addr): Avoid uninitialized warning.
 273
 274 2005-03-17  Diego Novillo  <dnovillo@redhat.com>
 275
 276         * MAINTAINERS: Remove self as maintainer of x86 intel
 277         mode.
 278
 279 2005-03-16  Nick Clifton  <nickc@redhat.com>
 280             Ben Elliston  <bje@au.ibm.com>
 281
 282         * configure.in (werror): New switch: Add -Werror to the
 283         compiler command line.  Enabled by default.  Disable via
 284         --disable-werror.
 285         * configure: Regenerate.
 286
 287 2005-03-15  Daniel Marques  <marques@cs.cornell.edu>
 288             Nick Clifton  <nickc@redhat.com>
 289
 290         * objcopy.c (globalize_specific_list): New linked list of symbols
 291         to convert from local binding into global binding.
 292         (command_line_switch): Add OPTION_GLOBALIZE_SYMBOL and
 293         OPTION_GLOBALIZE_SYMBOLS.
 294         (copy_options): Add "globalize-symbol" and "globalize-symbols".
 295         (copy_usage): Document the new switches.
 296         (filter_symbols): Convert defined local symbols mentioned on the
 297         globalize_specific_list into global symbols.
 298         (copy_object): Perform actions if the globalize_specific_list is
 299         not empty.
 300         (copy_main): Handle new switches.
 301         * NEWS: Mention new feature.
 302         * doc/binutils.texi: Document new switches.
 303
 304 2005-03-15  Alan Modra  <amodra@bigpond.net.au>
 305
 306         * po/es.po: Commit new Spanish translation.
 307
 308         * po/fr.po: Commit new French translation.
 309
 310 2005-03-14  Alan Modra  <amodra@bigpond.net.au>
 311
 312         * po/tr.po: Commit new Turkish translation.
 313
 314 2005-03-11  Nick Clifton  <nickc@redhat.com>
 315
 316         * po/fr.po: Updated French translation.
 317
 318 2005-03-10  Nick Clifton  <nickc@redhat.com>
 319
 320         * configure.in (ALL_LINGUAS): Add Romanian lingua "ro".
 321         * configure: Regenerate.
 322         * po/ro.po: New file.
 323
 324         * po/ru.po: Updated file.
 325
 326 2005-03-05  Alan Modra  <amodra@bigpond.net.au>
 327
 328         * po/binutils.pot: Regenerate.
 329
 330 2005-03-02  Jan Beulich  <jbeulich@novell.com>
 331
 332         * ar.c (remove_output): Use unlink_if_ordinary instead of unlink.
 333         * objcopy.c (copy_file): Likewise.
 334         (strip_main): Likewise.
 335
 336 2005-03-01  Stig Petter Olsroed  <stigpo@users.sourceforge.net>
 337             Nick Clifton  <nickc@redhat.com>
 338
 339         * objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
 340         (struct objdump_disasm_info): Add 'reloc' field.
 341         (disassemble_bytes): Fix check for when an insn has a reloc
 342         associated with it.  Improve comment explaining why the use of
 343         octets is wrong.  Set the 'reloc' field in objdump_disasm_info
 344         structure.
 345         (objdump_print_addr): Use new 'reloc' field to lookup the correct
 346         address for the symbol associated with the current instruction's
 347         relocation.
 348         (disassemble_info): Initialise 'reloc' field.
 349
 350 2005-02-28  Jakub Jelinek  <jakub@redhat.com>
 351
 352         * readelf.c (get_file_type, get_machine_name, get_osabi_name,
 353         get_segment_type, get_section_type_name, get_elf_class,
 354         get_data_encoding, get_group_flags, dynamic_section_mips_val,
 355         get_symbol_binding, get_symbol_type, get_TAG_name, get_FORM_name,
 356         get_AT_name, process_mips_specific, process_gnu_liblist,
 357         get_note_type, get_netbsd_elfcore_note_type): Use snprintf instead of
 358         sprintf where needed.
 359         (get_dynamic_type): Likewise.  Increase buff to 64 bytes.
 360         (get_elf_section_flags): Increase buff to 33 bytes.  Avoid
 361         using strcat.
 362         (get_dynamic_flags): Renamed to...
 363         (print_dynamic_flags): ... this.  Print the flags to stdout instead
 364         of returning them as string.
 365         (process_dynamic_section): Adjust caller.
 366
 367 2005-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 368
 369         * readelf.c (display_debug_ranges): Print out offset for end of
 370         list.
 371
 372 2005-02-23  Alan Modra  <amodra@bigpond.net.au>
 373
 374         * dlltool.c: Warning fixes.
 375         * objdump.c: Likewise.
 376
 377 2005-02-22  Alan Modra  <amodra@bigpond.net.au>
 378
 379         * Makefile.am (syslex.o, sysinfo.o): Pass AM_CFLAGS to compiler.
 380         (syslex.o, sysinfo.o, dlltool.o, rescoff.o): Remove duplicate
 381         dependencies.  Run "make dep-am".
 382         * nlmconv.c: Warning fixes.
 383         * readelf.c: Likewise.
 384         * srconv.c: Likewise.
 385         * sysdump.c: Likewise.
 386         * sysinfo.y: Likewise.
 387         * syslex.l: Likewise.  Use yyleng instead of strlen, memcpy instead
 388         of strcpy.
 389         * Makefile.in: Regenerate.
 390
 391 2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>
 392
 393         * objcopy.c (parse_flags): Replace SEC_SHARED with
 394         SEC_COFF_SHARED.
 395
 396         * objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
 397         SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
 398         SEC_COFF_SHARED for COFF only.
 399
 400 2005-02-21  Alan Modra  <amodra@bigpond.net.au>
 401
 402         * Makefile.am: Run "make dep-am"
 403         * Makefile.in: Regenerate.
 404         * doc/Makefile.in: Regenerate.
 405
 406 2005-02-21  Alan Modra  <amodra@bigpond.net.au>
 407
 408         * readelf.c (BYTE_GET8): Delete.  Replace uses with BYTE_GET.
 409         (byte_get_little_endian): Don't handle size of -8.
 410         (byte_get_signed, byte_get_big_endian): Likewise.
 411         (print_dec_vma, print_hex_vma): New functions.
 412         (print_vma): Use them.  Return chars output.
 413         (get_dynamic_data): Return a bfd_vma array.  Add ent_size parm.
 414         (process_symbol_table): Handle alpha and s390 .hash.
 415
 416 2005-02-18  H.J. Lu  <hongjiu.lu@intel.com>
 417
 418         * readelf.c (display_debug_loc): Print out offset for end of
 419         list.
 420
 421 2005-02-18  Joseph S. Myers  <joseph@codesourcery.com>
 422
 423         * Makefile.am (TOOL_PROGS): Add objdump.
 424         * Makefile.in: Regenerate.
 425
 426 2005-02-17  Alan Modra  <amodra@bigpond.net.au>
 427
 428         * deflex.l (YY_NO_UNPUT): Define.
 429         * rclex.l (YY_NO_UNPUT): Define.
 430         * rcparse.y (null_unichar): New static var.
 431         (res_null_text): Use it rather than attempting to init from wchar_t.
 432         * windres.c: Include assert.h and time.h before getopt.h.
 433         Include config.h and unistd.h too.
 434
 435 2005-02-15  Nick Clifton  <nickc@redhat.com>
 436
 437         * nlmconv.c: Provide a full prototype for the localtime() function
 438         in order to avoid a compile time warning.
 439
 440 2005-02-11  H.J. Lu  <hongjiu.lu@intel.com>
 441
 442         * readelf.c (group_count): Don't initialize it.
 443         (process_section_groups): Reurn 1 if we won't do unwind nor
 444         section groups. Set group_count to 0 before counting group
 445         sections and return 1 if there are no group sections. Reread
 446         SHT_SYMTAB/SHT_STRTAB sections only when needed. Don't skip
 447         section 0.
 448         (process_object): Only set do_unwind to 0 if
 449         process_section_groups return 0.
 450
 451 2005-02-10  Ian Lance Taylor  <ian@airs.com>
 452
 453         * MAINTAINERS: Update my e-mail address.
 454
 455 2005-02-10  Mark Mitchell  <mark@codesourcery.com>
 456
 457         * MAINTAINERS: Add Paul Brook and Mark Mitchell as ARM (Symbian)
 458         maintainers.
 459
 460 2005-02-07  Inderpreet Singh <inderpreetb@noida.hcltech.com>
 461
 462          * MAINTAINERS: Add self as maintainer of MAXQ.
 463
 464 2005-01-31  Richard Sandiford  <rsandifo@redhat.com>
 465
 466         * readelf.c (eh_addr_size): New variable.
 467         (find_section): Move earlier in file.  Return empty sections too.
 468         (process_program_headers): Use find_section to find .dynamic.
 469         (process_section_headers): Initialize eh_addr_size.
 470         (dump_ia64_unwind, slurp_ia64_unwind_table, ia64_process_unwind)
 471         (dump_hppa_unwind, slurp_hppa_unwind_table, hppa_process_unwind)
 472         (display_debug_frames): Use it instead of local addr_size variable.
 473         (size_of_encoded_value): Get pointer size from eh_addr_size rather
 474         than is_32bit_elf.
 475
 476 2005-01-31  Andrew Cagney  <cagney@gnu.org>
 477
 478         * configure: Regenerate to track ../gettext.m4.
 479
 480 2005-01-31  Nick Clifton  <nickc@redhat.com>
 481
 482         * version.c (print_version): Bump the copyright date to 2005.
 483
 484 2005-01-25  Alan Modra  <amodra@bigpond.net.au>
 485
 486         * nm.c (display_rel_file): Read dynamic syms before calling
 487         bfd_get_synthetic_symtab.
 488
 489 2005-01-21  Ben Elliston  <bje@au.ibm.com>
 490
 491         * dlltool.c (dump_iat): Remove unused function.
 492         (gen_exp_file): Remove #if 0'd code.
 493         (make_one_lib_file): Likewise.
 494         * srconv.c: Remove #if 0'd code throughout.
 495         * size.c (lprint_number): Remove.
 496         (print_berkeley_format): Remove #if 0'd code.
 497         * ar.c (do_quick_append): Remove declaration and definiton.
 498         (main): Remove #if 0'd code.
 499         * filemode.c (filemodestring): Remove #if 0'd function.
 500         * sysdump.c (unit_info_list): Remove function.
 501         (object_body_list): Likewise.
 502         (program_structure): Likewise.
 503         (debug_list): Likewise.
 504         (module): Remove #if 0'd code.
 505
 506 2005-01-20  Mark Mitchell  <mark@codesourcery.com>
 507
 508         * BRANCHES: Add binutils-2_15-branch.
 509
 510         * MAINTAINERS: Document branch policy.
 511         * BRANCHES: New file.
 512
 513 2005-01-19  Fred Fish  <fnf@specifixinc.com>
 514
 515         * NEWS: Make note of the new MIPS disassembly option "no-aliases".
 516         * doc/binutils.texi (objdump): Document the "no-aliases"
 517         disassembly option.
 518
 519 2005-01-17   Eugene Kotlyarov  <ekot@narod.ru>
 520
 521         PR binutils/647
 522         * rcparse.y (RCDATA): Allow a filename to be supplied as the
 523         parameter.  Parse it with define_rcdata_file().
 524         * resrc.c (define_rcdata_file): New function.
 525         * windres.h: Provide a prototype for the new function.
 526
 527         * resrc.c (define_user_file): Fix typo by replacing "font file"
 528         with "file".
 529
 530 2005-01-16  Jason Thorpe  <thorpej@netbsd.org>
 531
 532         * MAINTAINERS: Update my email address.
 533
 534 2005-01-16  Danny Smith  <dannysmith@users.sourceforge.net>
 535
 536         * dlltool.c (set_dll_name_from_def): New function.  Strip name
 537         to basename, with warning.
 538         (def_name): Use it.
 539         (def_library): Likwise.
 540         (main): Strip arg of --dllname to basename, with warning.
 541         Only use basename of exp_name when inferring dll_name.
 542
 543 2005-01-11  Nick Clifton  <nickc@redhat.com>
 544
 545         PR binutils/637
 546         * doc/binutils.texi (c++filt): Use uppercase CXXFILT in the
 547         footnote in order to prevent the sed script in the Makefile from
 548         converting it into c++filt.
 549
 550 2005-01-10  H.J. Lu  <hongjiu.lu@intel.com>
 551
 552         BZ 635
 553         readelf.c (saved_base_address): Removed.
 554         (decode_64bit_range): Likewise.
 555         (decode_range): Likewise.
 556         (display_64bit_debug_ranges): Likewise.
 557         (debug_info): Add range_lists, num_range_lists and
 558         max_range_lists.
 559         (read_and_display_attr_value): Handle do_debug_ranges.
 560         (process_debug_info): Likewise.
 561         (display_debug_ranges): Rewrite.
 562         (process_object): Free range_lists.
 563
 564 2005-01-10  Andreas Schwab  <schwab@suse.de>
 565
 566         * configure.in: Don't define SKIP_ZEROES.
 567         * configure: Regenerate.
 568         * objdump.c (disassemble_data): Set skip_zeroes and
 569         skip_zeroes_at_end in disasm_info to defaults.
 570         (DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
 571         (DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
 572         always define.
 573         (disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
 574         objdump_disasm_info.
 575
 576 2005-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 577
 578         * readelf.c (display_debug_loc): Display base address
 579         specifiers.  Always output <End of list>.
 580
 581 2005-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 582
 583         * readelf.c (have_frame_base): New.
 584         (need_base_address): Likewise.
 585         (saved_base_address): Likewise.
 586         (decode_location_expression): Return 1 if DW_AT_frame_base is
 587         needed.
 588         (debug_info): Add base_address and a have_frame_base pointer.
 589         (read_and_display_attr_value): Replace saved_DW_AT_low_pc with
 590         saved_base_address. Record base address. Set have_frame_base.
 591         Record if a location list has DW_AT_frame_base. Display if a
 592         location expression has no DW_AT_frame_base but needs one. Set
 593         saved_base_address only if needed.
 594         (process_debug_info): Clear have_frame_base, saved_base_address
 595         and set need_base_address.
 596         (display_debug_loc): Display if a location expression has no
 597         DW_AT_frame_base but needs one. Display if start >= end. Don't
 598         adjust for section address. Properly handle base address.
 599         (process_object): Free the have_frame_base pointer in
 600         debug_info.
 601
 602 2005-01-04  H.J. Lu  <hongjiu.lu@intel.com>
 603
 604         * readelf.c (display_debug_loc): Display offsets for hole and
 605         overlap.
 606         (display_debug_str): Add a newline at the end.
 607
 608 2005-01-04  Armin Diehl  <diehl@nordrhein.de>
 609
 610         PR binutils/630
 611         * nlmconv.c (main): Only store the basename of the output filename
 612         in the module table.
 613
 614 2005-01-04  H.J. Lu  <hongjiu.lu@intel.com>
 615
 616         BZ 615
 617         * readelf.c (process_debug_info): New.
 618         (debug_info): Add num_loc_offsets, loc_offsets and
 619         last_loc_offset_p.
 620         (get_debug_info): Use process_debug_info.
 621         (display_debug_loc): Properly handle location list. Warn if bad
 622         location lists are encoutnered.
 623         (read_and_process_attr_value): New.
 624         (read_and_display_attr_value): Use "%lx" for DW_FORM_data4.
 625         (display_debug_info): Use process_debug_info.
 626         (process_object): Also free loc_offsets in debug_information.
 627
 628 2004-12-31  Alan Modra  <amodra@bigpond.net.au>
 629
 630         * objdump.c (remove_useless_symbols): Discard section symbols.
 631
 632 2004-12-27  H.J. Lu  <hongjiu.lu@intel.com>
 633
 634         * readelf.c (read_leb128): Support 64bit host.
 635
 636 2004-12-23  Nick Clifton  <nickc@redhat.com>
 637
 638         PR binutils/616
 639         * readelf.c (debug_info): Add 'cu_offset' field.
 640         (get+pointer_size_of_comp_unit): Rename to
 641         'get_pointer_size_and_offset_of_comp_unit'.  Add code to return
 642         the offset of the comp_unit if requested.
 643         (get_debug_info): Record comp_unit offsets as well.
 644         (display_debug_lines): Call get_pointer_size_of_comp_unit.
 645         (decode_location_expression): Add an extra parameter - the offset
 646         of the current comp-unit.  Use this when decoding the DW_OP_call2
 647         and DW_OP_call4 operators.
 648         (display_debug_loc): Call get_pointer_size_of_comp_unit, pass the
 649         comp_unit offset on the decode_location_expression.
 650         (read_and_display_attr_value): Pass the comp_unit offset on the
 651         decode_location_expression.
 652         (display_debug_frames): Pass 0 as the comp_unit offset to
 653         decode_location_expression.
 654
 655 2004-12-22  Nick Clifton  <nickc@redhat.com>
 656
 657         * readelf.c (last_pointer_size, warned_about_missing_comp_units):
 658         New variables associated with obtaining the pointer size for a
 659         comp_unit.
 660         (get_pointer_size_of_comp_unit): Add an extra parameter - the name
 661         of the section requesting the pointer size.  Use this name in
 662         error messages.  If there are not enough comp_units available
 663         produce a warning message, but return the last known pointer size
 664         so that section dumping can continue.
 665         (get_debug_info): Reset the new variables.
 666         (display_debug_lines): Add extra parameter to invocation of
 667         get_pointer_size_of_comp_unit and remove error message when it
 668         returns 0.
 669         (display_debug_loc): Likewise.
 670
 671 2004-12-15 Jan Beulich  <jbeulich@novell.com>
 672
 673         * doc/binutils.texi: Document --strip-unneeded-symbol and
 674         --strip-unneeded-symbols.
 675         * objcopy.c (strip_unneeded_list): New.
 676         (enum command_line_switch): Add OPTION_STRIP_UNNEEDED_SYMBOL
 677         and OPTION_STRIP_UNNEEDED_SYMBOLS.
 678         (copy_options): Add  --strip-unneeded-symbol and
 679         --strip-unneeded-symbols.
 680         (copy_usage): Likewise.
 681         (filter_symbols): Suppress copying of symbol if in strip_unneeded_list
 682         and the symbol is not needed.
 683         (copy_main): Handle OPTION_STRIP_UNNEEDED_SYMBOL and
 684         OPTION_STRIP_UNNEEDED_SYMBOLS.
 685
 686 2004-12-09  Ian Lance Taylor  <ian@wasabisystems.com>
 687
 688         * readelf.c (get_machine_flags): Handle E_MIPS_MACH_9000.
 689
 690 2004-12-08  Ben Elliston  <bje@au.ibm.com>
 691
 692         * arlex.l: Fix formatting.
 693
 694 2004-12-08  Ben Elliston  <bje@au.ibm.com>
 695
 696         * doc/Makefile.am (config.texi): Emit a @set UPDATED command to
 697         config.texi whose value is the current month and year.
 698         * doc/Makefile.in: Rebuild.
 699         * doc/binutils.texi: Set the document subtitle to be the value of
 700         the Texinfo UPDATED variable (obtained from config.texi).
 701
 702 2004-12-07  Ben Elliston  <bje@au.ibm.com>
 703
 704         PR binutils/249
 705         * doc/binutils.texi (def file format): New node.
 706         (dlltool): Use the tool name as the @chapter name, like all the
 707         other binutils.  Use @file{.def} throughout for consistency.
 708
 709 2004-12-06  Ben Elliston  <bje@au.ibm.com>
 710
 711         * dlltool.c: Comment fix.
 712
 713 2004-12-06  Ben Elliston  <bje@au.ibm.com>
 714
 715         * doc/binutils.texi: Update copyright years.
 716
 717 2004-12-03  Richard Sandiford  <rsandifo@redhat.com>
 718
 719         * MAINTAINERS: Remove mention of config.if.
 720
 721 2004-11-30  Tero Niemela  <tero_niemela@yahoo.com>
 722
 723         * Makefile.am: Change LOCALEDIR to $(datadir)/share.
 724         * Makefile.in: Regenerate.
 725
 726 2004-11-10  Ian Lance Taylor  <ian@wasabisystems.com>
 727
 728         PR binutils/536
 729         * stabs.c (stab_demangle_template): Call stab_demangle_count
 730         rather than stab_demangle_get_count to get the length of a pointer
 731         target.
 732
 733 2004-11-10  Danny Smith  <dannysmith@users.sourceforge.net>
 734
 735         * defparse.y: Remove unnecessary commas from token list.
 736
 737 2004-11-08  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
 738
 739         * doc/binutils.texi (nm): Update description of weak symbols.
 740
 741 2004-11-03  Nick Clifton  <nickc@redhat.com>
 742
 743         * readelf.c (do_debug_ranges): New variable.
 744         (usage): Document new switch: -wR or --debug-dump=Ranges.
 745         (parse_args): Handle new switch.  Replace switch statement for the
 746         long options with a more compact table structure.
 747         (process_section_headers): Allow the dumping of .debug_ranges
 748         sections if so requested.
 749         (debug_displays): Likewise.
 750         (load_debug_range): New function: Grabs the contents of a
 751         .debug_ranges section.
 752         (free_debug_range): New function: Releases the grabbed
 753         .debug_ranges section.
 754         (decode_64bit_range): New function: Displays a 64-bit range in a
 755         .debug_ranges section.
 756         (decode_range): New function: Displays a 32-bit range in a
 757         .debug_ranges section.
 758         (read_and_display_attr_value): Record the value of DW_AT_low_pc
 759         attributes.  Use decode_ranges() to display a DW_AT_ranges
 760         attribute.
 761         (display_debug_info): Use load_debug_range() and
 762         free_debug_range().
 763         (display_64bit_debug_ranges): New function.  Displays the contents
 764         of a 64-bit format .debug_ranges section.
 765         (display_debug_ranges): New function: Displays the contents of a
 766         32-bit .debug_ranges section.
 767
 768         (main): Move cmdline_dump_sects and num_cmdline_dump_sects into the
 769         global scope.
 770         (process_object): Initialise the dump_sects array from the
 771         cmdline_dump_sects array before processing each object file.
 772
 773         (streq, strneq): New macros.  Use them to replace occurrences of
 774         strcmp() and strncmp().
 775
 776         (debug_information): New structure array to replace
 777         debug_line_pointer_sizes array.
 778         (num_debug_info_entries): New variable to replace
 779         num_debug_line_pointers.
 780         (get_pointer_size_of_comp_unit): New function: Returns the pointer
 781         size of a given compilation unit.
 782         (get_debug_info): New function to replace
 783         get_debug_line_pointer_sizes.
 784         (display_debug_lines): Use the new functions.
 785         (display_debug_loc): Likewise.
 786
 787         (disassemble_section): Change return type to int.
 788         (display_debug_lines): Move local variables to their
 789         innermost scope.
 790         (display_debug_section): Likewise.  Also record the return value
 791         of functions called and pass this back to the parent.  Also only
 792         warn about undumped sections when the user explicitly requested
 793         their dumping.
 794
 795         (debug_apply_rela_addends): Allow relocations against STT_OBJECT
 796         types as well.
 797
 798         * NEWS: Mention the support for decoding .debug_ranges sections.
 799         * doc/binutils.texi: Document the new command line switch to
 800         readelf.
 801
 802 2004-11-03  Randolph Chung  <tausq@debian.org>
 803
 804         * readelf.c (ia64_unw_aux_info, ia64_unw_table_entry): Rename from
 805         unw_aux_info and unw_table_entry.
 806         (find_symbol_for_address): Pass symtab and strtab info explicitly.
 807         (dump_ia64_unwind): Rename unw_{aux_info,table_entry} with ia64_
 808         prefix.
 809         (slurp_ia64_unwind_table): Likewise.
 810         (ia64_process_unwind): Rename from old process_unwind.
 811         (hppa_unw_aux_info): New.
 812         (dump_hppa_unwind): New.
 813         (slurp_hppa_unwind_table): New.
 814         (hppa_process_unwind): New.
 815         (process_unwind): Factor out common unwinding checks; dispatch to
 816         unwind handler based on machine type.
 817
 818 2004-11-02  Nick Clifton  <nickc@redhat.com>
 819
 820         * readelf.c (display_debug_lines): Fix typo in error message.
 821
 822 2004-10-26  Mark Mitchell  <mark@codesourcery.com>
 823
 824         * readelf.c (get_note_type): Handle notes not in core files.
 825         (process_note_sections): New function.
 826         (process_corefile_contents): Rename to ...
 827         (process_notes): ... this.
 828         (process_object): Call process_notes, not
 829         process_corefile_contents.
 830         * doc/binutils.texi: Update readelf -n documentation.
 831
 832 2004-10-26  Jakub Jelinek  <jakub@redhat.com>
 833
 834         * ar.c (extract_file): Set atime to mtime for ar xo.
 835
 836 2004-10-25  Ian Lance Taylor  <ian@wasabisystems.com>
 837
 838         * stabs.c (stab_demangle_v3_arglist): New static function, broken
 839         out of stab_demangle_v3_argtypes.
 840         (stab_demangle_v3_argtypes): Call it.
 841         (stab_demangle_v3_arg): Handle DEMANGLE_COMPONENT_FUNCTION_TYPE.
 842         If we find an unrecognized component, print out its number.
 843
 844 2004-10-25  David Mosberger  <davidm@hpl.hp.com>
 845
 846         * readelf.c (slurp_ia64_unwind_table): Support relocations against
 847         non-section symbols by adding in the symbol value.
 848
 849 2004-10-25  Nick Clifton  <nickc@redhat.com>
 850
 851         PR 465
 852         * readelf.c (dynamic_strings_length): New global variable.
 853         (VALID_DYNAMIC_NAME, GET_DYNAMIC_NAME): New macros for accessing
 854         strings in the dynamic string table.
 855         (process_section_headers): Initialise dynamic_strings_length.
 856         (process_dynamic_section): Likewise.
 857         (process_object): Reset dynamic_string_length when the buffer is freed.
 858         (dynamic_sections_mips_val): Use the new macros.
 859         (process_dynamic_section): Likewise.
 860         (process_version_sections): Likewise.
 861         (process_symbol_table): Likewise.
 862         (process_syminfo): Likewise.
 863         (process_mips_specific): Likewise.
 864         (dump_relocations): Add a new parameter 'strtablen' and use this
 865         to verify that string offset in a given reloc is valid.  Print a
 866         suitable error message otherwise.
 867         (process_relocs): Pass the new argument to dump_relocations.
 868
 869 2004-10-23  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
 870
 871         * dlltool.c: Include <assert.h>.
 872         (PREFIX_ALIAS_BASE): Define.
 873         (struct export): Add member import_name;
 874         (def_exports): Set import_name.
 875         (make_one_lib_file): Remove prefix alias code, use import_name
 876         in .idata$6.
 877         (gen_lib_file): Create and delete aliases.
 878
 879 2004-10-19  H.J. Lu  <hongjiu.lu@intel.com>
 880
 881         * readelf.c (process_section_groups): Free symtab after use.
 882
 883 2004-10-18  Tommy Pettersson <ptp@lysator.liu.se>
 884             Nick Clifton  <nickc@redhat.com>
 885
 886         * strings.c (usage): Place radix values for -t option into the
 887         correct order.
 888
 889         * objcopy.c (add_redefine_syms_file): Change error messages to use
 890         <filename>:<linenumber>: format for easier parsing by automatic
 891         tools.
 892
 893         * srconv.c (show_usage): Fix spelling typo.
 894
 895         * windres.c (format_from_filename): Suggest the use of -J instead
 896         of -I if the file type cannot be determined.
 897
 898 2004-10-18  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
 899
 900         * strings.c: Include <sys/stat.h>.
 901
 902 2004-10-18  Alan Modra  <amodra@bigpond.net.au>
 903
 904         * budemang.c (demangle): Fix thinko.
 905
 906         * budemang.c (demangle): Handle "@plt" suffix.
 907
 908 2004-10-14  Nick Clifton  <nickc@redhat.com>
 909
 910         * nm.c (usage): Fix description of --special-syms switch.
 911
 912 2004-10-13  Jakub Jelinek  <jakub@redhat.com>
 913
 914         * strings.c (statbuf): New typedef.
 915         (file_stat): Define.
 916         (strings_object_file): Avoid using get_file_size, instead do the
 917         checks here, using file_stat.
 918         * configure.in (HAVE_STAT64): New test.
 919         * configure: Rebuilt.
 920         * config.in: Rebuilt.
 921
 922 2004-10-12  Paul Brook  <paul@codesourcery.com>
 923
 924         * readelf.c (decode_ARM_machine_flags): Support EABI version 4.
 925
 926 2004-10-11  Alan Modra  <amodra@bigpond.net.au>
 927
 928         * objdump.c (dump_symbols): Fix thinko last change.  Improve error
 929         messages.
 930
 931 2004-10-08  Nick Clifton  <nickc@redhat.com>
 932
 933         * nm.c: Add a new switch --special-syms which, if enabled, will
 934         include the ARM Mapping symbols in nm's output.
 935         (usage): Mention the switch.
 936         (filter_symbols): Handle the switch.
 937         * objdump.c: Add a similar switch.
 938         (usage): Mention the switch.
 939         (dump_symbols): Handle the switch.
 940         * doc/binutils.texi: Document the new switches.
 941         * NEWS: Mention the new switches.
 942
 943 2004-10-08  Daniel Jacobowitz  <dan@debian.org>
 944
 945         * readelf.c (get_x86_64_section_type_name): New function.
 946         (get_section_type_name): Use it.
 947
 948 2004-10-08  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
 949
 950         * dlltool.c (make_one_lib_file): Revert 2004-09-02 and 2004-09-04
 951         patches.
 952         * doc/binutils.texi (dlltool): Revert 2004-09-06 patch.
 953
 954 2004-10-07  Alexandre Oliva  <aoliva@redhat.com>
 955
 956         * readelf.c (get_machine_flags): Don't fall through into m68k cpu
 957         types.
 958
 959 2004-10-01  Paul Brook  <paul@codesourcery.com>
 960
 961         * readelf.c (get_arm_section_type_name): New function.
 962         (get_section_type_name): Use it.
 963
 964 2004-09-28  Nick Clifton  <nickc@redhat.com>
 965
 966         * nm.c: Reorder functions to eliminate most of the static function
 967         prototypes.
 968
 969 2004-09-22  Alan Modra  <amodra@bigpond.net.au>
 970
 971         * readelf.c (process_program_headers): Don't include .tbss in non-TLS
 972         segments.
 973
 974 2004-09-17  Alan Modra  <amodra@bigpond.net.au>
 975
 976         * Makefile.am: Run "make dep-am".
 977         * Makefile.in: Regenerate.
 978         * config.in: Regenerate.
 979         * configure: Regenerate.
 980         * doc/Makefile.in: Regenerate.
 981         * po/binutils.pot: Regenerate.
 982
 983 2004-09-12  Alan Modra  <amodra@bigpond.net.au>
 984
 985         * readelf.c (decode_location_expression): Sign extend value for
 986         DW_OP_const1s, DW_OP_const2s, DW_OP_const4s, DW_OP_bra, DW_OP_skip.
 987
 988 2004-09-09  Nick Clifton  <nickc@redhat.com>
 989
 990         PR 363
 991         * ar.c (replace_members): Do not use get_file_size as
 992         ar_emul_append correctly handles missing files.
 993
 994 2004-09-07  H.J. Lu  <hongjiu.lu@intel.com>
 995
 996         * configure: Regenerated with autconfig 2.13.
 997
 998 2004-09-06  Danny Smith  <dannysmith@users.sourceforge.net>
 999
1000         * doc/binutils.texi (dlltool): Update --add-underscore, --kill-at
1001         documentation.
1002
1003 2004-09-06  Michael Wardle  <mbw@endbracket.net>
1004
1005         * doc/binutils.texi (objdump): Document that the -x switch includes
1006         the effect of the -p switch.
1007
1008 2004-09-04  Danny Smith  <dannysmith@users.sourceforge.net>
1009
1010         * dlltool.c (make_one_lib_file): Test if internal_name was
1011         specified by user before using it.
1012
1013 2004-09-02  Carlo Wood  <carlo@alinoe.com>
1014
1015         PR binutils/351
1016         * dlltool.c (make_one_lib_file): For IDATA6 take the name from
1017         exp->internal_name if it is present.
1018
1019 2004-09-02  Alexandre Oliva  <aoliva@redhat.com>
1020
1021         * MAINTAINERS: Add self as co-maintainer of FR-V.
1022         * readelf.c (get_machine_flags): Print FR-V cpu types.
1023
1024 2004-08-28  Alan Modra  <amodra@bigpond.net.au>
1025
1026         * nm.c (show_synthetic): New var.
1027         (long_options): Add "synthetic".
1028         (usage): Here too.
1029         (display_rel_file): Handle show_synthetic.
1030
1031 2004-08-28  Alan Modra  <amodra@bigpond.net.au>
1032
1033         * objdump.c (dump_bfd): Pass both symbol tables to
1034         bfd_get_synthetic_symtab.
1035
1036 2004-08-17  Jakub Jelinek  <jakub@redhat.com>
1037
1038         * objdump.c (dump_bfd): For relocatable objects, pass syms instead
1039         of dynsyms to bfd_get_synthetic_symtab.
1040
1041 2004-08-16  Alan Modra  <amodra@bigpond.net.au>
1042
1043         * readelf.c (debug_apply_rela_addends): New function, extracted from..
1044         (display_debug_info): ..here.
1045         (display_debug_frames): Call debug_apply_rela_addends.  Don't do
1046         DW_EH_PE_pcrel adjustment for ET_REL.
1047
1048 2004-08-06  Andreas Schwab  <schwab@suse.de>
1049
1050         * readelf.c (dump_relocations): Fix typo when calculating
1051         sec_index.
1052
1053 2004-08-02  Jakub Bogusz  <qboosh@pld-linux.org>
1054
1055         * dllwrap.c (deduce_name): Fix typos introduced when program_name
1056         was renamed to prog_name.
1057
1058 2004-07-29  Alexandre Oliva  <aoliva@redhat.com>
1059
1060         * readelf.c (get_machine_flags <EM_SH>): Handle EF_SH2A and
1061         EF_SH2A_NOFPU.
1062
1063 2004-07-28  Alexandre Oliva  <aoliva@redhat.com>
1064
1065         2003-07-08  Alexandre Oliva  <aoliva@redhat.com>
1066         * readelf.c (get_machine_flags <EM_SH)): Handle EF_SH4_NOFPU and
1067         EF_SH4A_NOFPU.
1068         2003-06-12  Alexandre Oliva  <aoliva@redhat.com>
1069         * readelf.c (get_machine_flags <EM_SH>): Print SH ISA name.
1070
1071 2004-07-21  H.J. Lu  <hongjiu.lu@intel.com>
1072
1073         * objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
1074         to access comdat.
1075         * objdump.c (dump_section_header): Likewise.
1076
1077 2004-07-15  Aravinda PR  <aravindapr@rediffmail.com>
1078
1079         * nlmconv.c (main): Pass map_file argument to link_inputs.
1080         (link_inputs): Use map_file argument if it is defined.
1081
1082 2004-07-13  Nick Clifton  <nickc@redhat.com>
1083
1084         * dllwrap.c: Replace 'program_name' with 'prog_name' to avoid
1085         conflicts with exported global defined in bucomm.h.
1086         (deduce_name): Rename parameter 'program_name' to 'name' to avoid
1087         shadowing the global defined in bucomm.h.
1088
1089 2004-07-12  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
1090
1091         * dlltool.c (ext_prefix_alias): New global variable.
1092         (make_one_lib_file): Add aliases with prefixes for external
1093         and import definitions.
1094         (usage): Document -p option.
1095         (long_options): Add --ext-prefix-alias option.
1096         (main): Handle -p.
1097         * doc/binutils.texi: Document new switch.
1098         * NEWS: Mention new switch.
1099
1100 2004-07-09  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1101
1102         * binutils/dlltool.c (asm_prefix): Add parameter: name.
1103         No underscore for symbols beginning with ?.
1104         (ASM_PREFIX): Add parameter: NAME.
1105         (gen_exp_file): Use new parameter.
1106         (make_label): Likewise.
1107         (make_imp_label): Likewise.
1108         (make_one_lib_file): Likewise.
1109
1110 2004-07-07  Tomer Levi  <Tomer.Levi@nsc.com>
1111
1112         * MAINTAINERS: Added myself to the list.
1113         * readelf.c: Include "elf/crx.h".
1114         (guess_is_rela): Handle EM_CRX.
1115         (get_machine_name): Likewise.
1116         (dump_relocations): Likewise.
1117
1118 2004-07-03  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
1119
1120         * doc/binutils.texi (nm): Clarify weak symbol description.
1121
1122 2004-06-24  Ben Elliston  <bje@au.ibm.com>
1123
1124         * readelf.c (get_segment_type): Display "GNU_STACK", not just
1125         "STACK", when a PT_GNU_STACK segment is encountered.
1126
1127 2004-06-24  Alan Modra  <amodra@bigpond.net.au>
1128
1129         * objcopy.c (copy_section): Don't set _cooked_size.
1130
1131 2004-06-22  Alan Modra  <amodra@bigpond.net.au>
1132
1133         * readelf.c (Elf32_Word): Delete.
1134         (get_32bit_dynamic_section): Handle SGI ELF dynamic segment.
1135         (get_64bit_dynamic_section): Likewise.
1136
1137         * readelf.c (get_32bit_dynamic_section): Stop at first DT_NULL entry.
1138         (get_64bit_dynamic_section): Likewise.
1139
1140         * readelf.c (dynamic_nent): New variable.
1141         (get_32bit_dynamic_section): Set it.
1142         (get_64bit_dynamic_section): Here too.
1143         (process_dynamic_section): Use it instead of dynamic_size.
1144         (process_syminfo): Likewise.
1145
1146         * readelf.c (get_32bit_dynamic_section): Correct number of entries
1147         translated from external to internal form.
1148         (get_64bit_dynamic_section): Likewise.
1149
1150 2004-06-18  Jie Zhang  <zhangjie@magima.com.cn>
1151
1152         * readelf.c (process_program_headers): When locating the dynamic
1153         section use the section table if it is present.
1154         (dynamic_segment): Renamed to dynamic_section.
1155         Replace references to dynamic segment with references to dynamic
1156         section, except where appropriate.
1157         (dynamic_segment_mips_val): Rename to dynamic_section_mips_val.
1158         (dynamic_segment_parisc_val): Rename to dynamic_section_parisc_val.
1159         (dynamic_segment_ia64_val): Rename to dynamic_section_ia64_val.
1160         (get_32bit_dynamic_segment): Rename to get_32bit_dynamic_section.
1161         Remove tag counting code as it is no longer needed.
1162         (get_64bit_dynamic_segment): Rename to get_64bit_dynamic_section.
1163         Remove tag counting code as it is no longer needed.
1164         (process_dynamic_segment): Rename to process_dynamic_section.
1165
1166 2004-06-15  Alan Modra  <amodra@bigpond.net.au>
1167
1168         * objcopy.c (copy_section): Use bfd_get_section_size instead of
1169         _raw_size or bfd_get_section_size_before_reloc.  Don't set reloc_done.
1170         (compare_section_lma): Likewise.
1171         * addr2line.c (find_address_in_section): Likewise.
1172         * coffgrok.c (do_sections_p1): Likewise.
1173         * dlltool.c (scan_drectve_symbols): Likewise.
1174         * nlmconv.c (main): Likewise.
1175         (copy_sections): Likewise.
1176         (powerpc_mangle_relocs): Likewise.
1177         * objdump.c (disassemble_section): Likewise.
1178         * prdbg.c (find_address_in_section): Likewise.
1179         * size.c (berkeley_sum): Likewise.
1180         * srconv.c (wr_ob): Likewise.
1181         * strings.c (strings_a_section): Likewise.
1182
1183 2004-05-28  Ian Lance Taylor  <ian@wasabisystems.com>
1184
1185         * readelf.c (decode_ARM_machine_flags): Add EF_ARM_VFP_FLOAT.
1186
1187 2004-05-17  David Heine  <dlheine@tensilica.com>
1188
1189         * objcopy.c (setup_bfd_headers): New function.
1190         (copy_object): Call setup_bfd_headers.
1191
1192 2004-05-13  Paul Brook  <paul@codesourcery.com>
1193
1194         * readelf.c (display_debug_frames): Handle dwarf3 format CIE
1195         entries.
1196
1197 2004-05-13  Nick Clifton  <nickc@redhat.com>
1198
1199         * po/fr.po: Updated French translation.
1200
1201 2004-05-11  Jakub Jelinek  <jakub@redhat.com>
1202
1203         * readelf.c (get_segment_type): Handle PT_GNU_RELRO.
1204
1205 2004-05-07  H.J. Lu  <hongjiu.lu@intel.com>
1206
1207         * readelf.c (section_groups): New.
1208         (group_count): New.
1209         (section_headers_groups): New.
1210         (process_section_groups): Populate group_count, section_groups
1211         and section_headers_groups.
1212         (process_unwind): Support section group.
1213         (process_object): Always call process_section_groups. Free
1214         section_groups and section_headers_groups.
1215
1216 2004-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1217
1218         * readelf.c (process_section_headers): Use %3lu on sh_info.
1219
1220 2004-04-30  Michael Deutschmann  <michael@talamasca.ocis.net>
1221
1222         * ranlib.sh: Quote $1 argument in case it contains spaces.
1223
1224 2004-04-27  John Paul Wallington  <jpw@gnu.org>
1225
1226         * objcopy.c (copy_usage, strip_usage): Fix spelling.
1227
1228 2004-04-26  H.J. Lu  <hongjiu.lu@intel.com>
1229
1230         * readelf.c (do_section_groups): New.
1231         (options): Add --section-groups/-g.
1232         (usage): Mention --section-groups/-g.
1233         (parse_args): Support --section-groups/-g.
1234         (get_group_flags): New.
1235         (process_section_groups): New.
1236         (process_object): Call process_section_groups.
1237
1238 2004-04-24  Alan Modra  <amodra@bigpond.net.au>
1239
1240         * objdump.c (disassemble_section): Don't disassemble sections
1241         without SEC_HAS_CONTENTS.
1242
1243 2004-04-22  Jakub Jelinek  <jakub@redhat.com>
1244
1245         * objdump.c (synthsyms, synthcount): New variables.
1246         (disassemble_data): Use dynsyms for stripped binaries or libraries.
1247         Add synthetized symbols.
1248         (dump_bfd): For disassemble, initialize dynsyms always and
1249         also synthsyms.  Free synthsyms and clear {sym,dynsym,synth}count
1250         before returning.
1251
1252 2004-04-14  Alan Modra  <amodra@bigpond.net.au>
1253
1254         * strings.c (print_strings): Cast file_off to unsigned long in
1255         printf arg list.
1256
1257 2004-04-07  Benjamin Monate  <benjamin.monate@cea.fr>
1258
1259         PR 86
1260         * arsup.c (ar_save): Use smart_rename.
1261
1262 2004-04-01  Dean Luick <luick@cray.com>
1263
1264         * readelf.c (display_debug_pubnames): Align offset and data
1265         columns.
1266         (read_and_display_attr_value): Add missing break;
1267         (debug_displays): Enable the display of the .debug_pubtypes
1268         section.
1269
1270 2004-03-30  Stan Shebs  <shebs@apple.com>
1271
1272         * mpw-config.in, mpw-make.sed, mac-binutils.r: Remove MPW
1273         support files, no longer used.
1274
1275 2004-03-23  Paul Brook  <paul@codesourcery.com>
1276
1277         * readelf.c (decode_ARM_machine_flags): Add EABI v3.
1278
1279 2004-03-21  Richard Henderson  <rth@redhat.com>
1280
1281         * readelf.c (display_debug_frames): Don't crash for mismatched
1282         DW_CFA_restore_state.
1283
1284 2004-03-19  Alan Modra  <amodra@bigpond.net.au>
1285
1286         * Makefile.am: Run "make dep-am".
1287         * Makefile.in: Regenerate.
1288         * aclocal.m4: Regenerate.
1289         * config.in: Regenerate.
1290         * configure: Regenerate.
1291         * po/binutils.pot: Regenerate.
1292
1293 2004-03-15  Nathan Sidwell  <nathan@codesourcery.com>
1294
1295         * objdump.c (struct SFILE): Replace current pointer with pos
1296         offset, rename size to alloc.
1297         (objdump_sprintf): Avoid unnecessary copies in the common case
1298         (disassemble_bytes): Keep sfile live throughout the
1299         function. Adjust usage appropriately.
1300
1301 2004-03-10  Ben Elliston  <bje@gnu.org>
1302
1303         * MAINTAINERS: Update my mail address.
1304
1305 2004-03-08  Danny Smith  <dannysmith@users.sourceforge.net>
1306
1307         * deflex.l: Handle "PRIVATE" string.
1308         * defparse.y (%token): Add PRIVATE.
1309         (%type): Add opt_PRIVATE.
1310         (expline): Pass opt_PRIVATE to def_exports.
1311         (opt_PRIVATE): Handle PRIVATE token.
1312         * dlltool.h (def_exports): Add 7th param for private flag to
1313         declaration.
1314         * dlltool.c: Add PRIVATE to comment on EXPORTS syntax.
1315         (struct export): Add 'private' field.
1316         (def_exports): Set 'private' field of struct exports.
1317         (scan_drectve_symbols): Adjust calls to def_exports.
1318         (scan_filtered_symbols): Likewise.
1319         (dump_def_info): Print 'private' field.
1320         (gen_def_file): Likewise.
1321         (gen_lib_file): Skip generation of lib object if private.
1322         Delete tmp object files in same order as they were generated.
1323         Don't delete non-existent private object files.
1324
1325 2004-02-27  Andreas Schwab  <schwab@suse.de>
1326
1327         * ar.c (main): Support POSIX-compatible argument parsing.
1328
1329 2004-02-23  Daniel Lucq  <daniel@lucq.org>
1330
1331         * readelf.c (process_mips_specific): Print conflictsno as an
1332         unsigned long.
1333
1334 2004-02-21  Dmitry Timoshkov  <dmitry@baikal.ru>
1335
1336         * dlltool.c (gen_exp_file): Always output names for forwarded symbols.
1337
1338 2004-02-19  Jakub Jelinek  <jakub@redhat.com>
1339
1340         * objcopy.c (copy_section): Avoid warnings.
1341
1342 2004-02-14  Andrew Cagney  <cagney@redhat.com>
1343
1344         * ar.c (remove_output): Use bfd_cache_close.
1345         * arsup.c (ar_end): Ditto.
1346
1347 2004-01-21  Roland McGrath  <roland@redhat.com>
1348
1349         * readelf.c (get_note_type): Match NT_AUXV.
1350
1351 2004-01-20  Nick Clifton  <nickc@redhat.com>
1352
1353         * version.c (print_version): Update copyright year to 2004.
1354
1355 2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
1356
1357         * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
1358         throughout.
1359         * aclocal.m4: Regenerate.
1360         * configure: Regenerate.
1361
1362 2004-01-12  Jakub Jelinek  <jakub@redhat.com>
1363
1364         * objcopy.c: Include elf-bfd.h.
1365         (is_strip_section): Don't strip debugging sections if
1366         STRIP_NONDEBUG.
1367         (setup_section): If STRIP_NONDEBUG make SEC_ALLOC sections
1368         ~(SEC_LOAD | SEC_HAS_CONTENTS) and on ELF targets also SHT_NOBITS.
1369
1370         * objcopy.c (copy_section): Free relpp if relcount == 0.
1371
1372 2004-01-12  Ian Lance Taylor  <ian@wasabisystems.com>
1373
1374         * stabs.c (parse_stab_argtypes): Handle g++ ABI version 3 names.
1375         (stab_demangle_argtypes): Likewise.
1376         (stab_demangle_v3_argtypes): New static function.
1377         (stab_demangle_v3_arg): New static function.
1378
1379 2004-01-12  Nick Clifton  <nickc@redhat.com>
1380
1381         * objcopy.c (copy_object): Make the function boolean, returning
1382         FALSE upon failure.
1383         (copy_archive): Handle the return value from copy_object.
1384         (copy_file): Likewise.
1385
1386 2004-01-07  Nick Clifton  <nickc@redhat.com>
1387
1388         * readelf.c (find_section): New function.  Locates a named
1389         section.
1390         (get_debug_line_pointer_sizes): New function:  Initialises the
1391         debug_line_pointer_sizes array.
1392         (display_debug_lines): Call get_debug_line_pointer_sizes.
1393         (display_debug_loc): Likewise.
1394         (load_debug_loc): Use find_section.
1395         (load_debug_str): Likewise.
1396         (display_debug_info): Likewise.
1397         (prescan_debug_info): Delete.
1398         (debug_displays): Remove prescan field.
1399         (process_section_contents): Do not perform prescans.
1400
1401 2004-01-03  Alan Modra  <amodra@bigpond.net.au>
1402
1403         * objcopy.c (filter_bytes): Delete.  Move code to..
1404         (copy_section): ..here.  Simplify size adjustment.  Divide
1405         section lma by interleave.
1406
1407 2004-01-02  Nick Clifton  <nickc@redhat.com>
1408
1409         * po/ru.po: New file: Russian translation.
1410         * configure.in (ALL_LINGUAS): Add ru
1411         * configure: Regenerate.
1412
1413 For older changes see ChangeLog-0203
1414 \f
1415 Local Variables:
1416 mode: change-log
1417 left-margin: 8
1418 fill-column: 74
1419 version-control: never
1420 End: