1 2005-05-15 Yitzchak Scott-Thoennes <sthoenna@efn.org>
5 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
7 * acinclude.m4: Remove obsolete code.
8 * configure.in: Update AC_PREREQ.
9 * doc/Makefile.am (binutils_TEXINFOS): Define.
10 (config.texi): Depend on distributed files instead of built
12 (binutils.dvi, binutils.info): Remove unnecessary rules.
13 (DISTCLEANFILES): Remove.
14 (install-data-local): Renamed from install.
15 (info-local): Renamed from info.
16 * Makefile.in, aclocal.m4, config.in, configure,
17 doc/Makefile.in: Regenerated.
19 2005-05-14 Alan Modra <amodra@bigpond.net.au>
21 * readelf.c (get_ppc_dynamic_type): Display DT_PPC_GOT, not
24 2005-05-13 Fred Fish <fnf@specifixinc.com>
26 * readelf.c: Fix a couple of obvious comment typos,
27 'debug_str' -> 'debug_ranges' and proecess' -> 'process'.
29 2005-05-13 H.J. Lu <hongjiu.lu@intel.com>
31 * readelf.c (dump_ia64_unwind): Get stamp with proper size.
33 2005-05-12 Nick Clifton <nickc@redhat.com>
35 * readelf.c (display_debug_lines): If pointer_size has not been
36 found then assume that it is 4 in order to prevent a seg fault
37 when process_extend_line_op attempts to read the line data.
39 2005-05-11 Alan Modra <amodra@bigpond.net.au>
41 * readelf.c (get_ppc_dynamic_type): New function for DT_PPC_GLINK.
42 (get_dynamic_type): Call the above.
44 2005-05-07 Nick Clifton <nickc@redhat.com>
46 * Update the address and phone number of the FSF organization in
47 the GPL notices in the following files:
48 aclocal.m4, addr2line.c, ar.c, arlex.l, arparse.y, arsup.c,
49 arsup.h, binemul.c, binemul.h, bucomm.c, bucomm.h, budbg.h,
50 budemang.c, budemang.h, coffdump.c, coffgrok.c, coffgrok.h,
51 cxxfilt.c, debug.c, debug.h, deflex.l, defparse.y, dlltool.c,
52 dlltool.h, dllwrap.c, emul_aix.c, emul_vanilla.c, filemode.c,
53 ieee.c, nlmconv.c, nlmconv.h, nlmheader.y, nm.c, objcopy.c,
54 objdump.c, prdbg.c, rclex.l, rcparse.y, rdcoff.c, rddbg.c,
55 readelf.c, rename.c, resbin.c, rescoff.c, resrc.c, resres.c,
56 size.c, srconv.c, stabs.c, strings.c, sysdump.c, sysinfo.y,
57 syslex.l, unwind-ia64.c, unwind-ia64.h, version.c, windres.c,
58 windres.h, winduni.c, winduni.h wrstabs.c, doc/fdl.texi
60 2005-05-06 Jan Beulich <jbeulich@novell.com>
62 * objcopy.c (copy_file): Don't delete output upon error here.
63 (copy_main): Delete output upon error.
65 2005-05-02 Ben Elliston <bje@au.ibm.com>
67 * dlltool.c (dtab): Remove empty function.
68 (process_duplicates): Remove calls to dtab().
70 2005-05-01 Maciej W. Rozycki <macro@linux-mips.org>
72 * doc/binutils.texi (strip, objcopy): Clarify the description of
73 the "--strip-debug" option. Fix a typo.
75 2005-04-29 H.J. Lu <hongjiu.lu@intel.com>
77 * bucomm.c: Undo the last change.
80 2005-04-29 Ben Elliston <bje@au.ibm.com>
82 * syslex.l (word, number, unit): Remove unused variables.
83 * nlmheader.y (keyword_tokens): Make static.
84 * coffdump.c (dump_coff_symbol, coff_dump): Make static.
85 * coffgrok.c (lofile, last_function_symbol, last_function_type,
86 last_struct, last_enum, cur_sfile): Make variables static.
87 * sysdump.c (getCHARS, fillup, getBARRAY, getINT, getBITS,
88 sysroff_swap_tr_in, sysroff_print_tr_out): Make static.
89 * sysinfo.y (writecode, it, code, repeat, oldrepeat, name, rdepth,
90 names, pnames): Likewise.
92 2005-04-29 Ben Elliston <bje@au.ibm.com>
94 * ar.c (mri_mode): Make static.
95 * arsup.c (obfd, real_name, outfile): Likewise.
96 * binemul.c (ar_emul_create): Remove unused function.
97 (ar_emul_default_create): Likewise.
98 * binemul.h (ar_emul_create): Remove declaration.
99 (ar_emul_default_create): Likewise.
100 (struct bin_emulation_xfer_struct): Remove ar_create member.
101 * bucomm.c (report): Make static.
102 * bucomm.h (report): Remove declaration.
103 * cxxfilt.c (mbuffer): Make static.
104 (main): Use unsigned ints for some loop control variables.
105 * readelf.c: Make many global variables static.
106 * size.c (berkeley_format): Make static.
107 (long_options): Likewise.
108 * emul_aix.c (bin_aix_emulation): Remove ar_emul_default_create
109 structure initialiser.
110 (bin_aix5_emulation): Likewise.
111 * emul_vanilla.c (bin_vanilla_emulation): Likewise.
113 2005-04-27 Ben Elliston <bje@au.ibm.com>
115 * syslex.l: Adjust top-of-file comment: this file is part of GNU
116 binutils, not GNU ld.
118 2005-04-25 Nick Clifton <nickc@redhat.com>
121 * objcopy.c (copy_archive): Initialise 'obfd' field of new
124 * objcopy.c (copy_usage): Fix description of -K switch.
126 * doc/binutils.texi (strip, objcopy): Fix description of -K
129 2005-04-20 Daniel Jacobowitz <dan@codesourcery.com>
131 * readelf.c (display_debug_frames): Use data factor for
132 DW_CFA_def_cfa_sf and DW_CFA_def_cfa_offset_sf.
134 2005-04-19 H.J. Lu <hongjiu.lu@intel.com>
136 * objdump.c (dump_section_header): Skip linker created section.
138 2005-04-17 H.J. Lu <hongjiu.lu@intel.com>
140 * objdump.c (dump_section_header): Support SEC_GROUP.
142 2005-04-16 Nick Clifton <nickc@redhat.com>
144 * readelf.c (debug_apply_rela_addends): Remove redundant %s from
147 2005-04-15 Nick Clifton <nickc@redhat.com>
149 * objcopy.c (copy_file): Issue an error message when attmepting to
150 copy an empty input file.
152 2005-04-14 Alan Modra <amodra@bigpond.net.au>
154 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
155 * configure.in: Include ../bfd/warning.m4 contents.
156 * Makefile.in: Regenerate.
157 * configure: Regenerate.
158 * doc/Makefile.in: Regenerate.
160 2005-04-12 Alan Modra <amodra@bigpond.net.au>
162 * Makefile.am: Run "make dep-am".
163 (syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
164 (sysroff.o, defparse.o, deflex.o): Likewise.
165 (nlmheader.o, rcparse.o, rclex.o): Likewise.
166 * Makefile.in: Regenerate.
167 * aclocal.m4: Regenerate.
168 * config.in: Regenerate.
169 * configure: Regenerate.
171 2005-04-11 Jan Beulich <jbeulich@novell.com>
173 * MAINTAINERS: Add myself as ix86 Intel mode maintainer.
175 2005-04-06 Nick Clifton <nickc@redhat.com>
176 H.J. Lu <hongjiu.lu@intel.com>
178 * po/rw.po: New translation: Kinyarwanda.
179 * configure.in (ALL_LINGUAS): Add rw.
180 * configure: Regenerate.
182 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
184 * readelf.c (debug_apply_rela_addends): Reorder r_info as
185 necessary for 64-bit MIPS.
187 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
189 * doc/binutils.texi (readelf): Remove a duplicate paragraph.
191 2005-04-04 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
194 * objdump.c (dump_symbols): Add a check to see if the section for
195 the symbol is chosen using process_section_p.
197 2005-04-01 H.J. Lu <hongjiu.lu@intel.com>
199 * NEWS: Mention new readelf options, "-N/--full-section-name"
200 and "-g/--section-groups".
202 * doc/binutils.texi: Document new readelf options,
203 "-N/--full-section-name" and "-g/--section-groups".
205 2005-03-31 H.J. Lu <hongjiu.lu@intel.com>
207 * readelf.c (do_full_section_name): New.
208 (options): Add "--full-section-name"/'N'.
209 (usage): Add -N/--full-section-name.
210 (parse_args): Handle 'N'.
211 (process_section_headers): Print out the full section name if
212 do_full_section_name isn't 0.
214 2005-03-31 Nick Clifton <nickc@redhat.com>
216 * configure.in: Add a check for <unistd.h> providing a prototype
217 for getopt() which is compatible with the one in
218 include/getopt.h. If so then define HAVE_DECL_GETOPT.
219 * configure: Regenerate.
220 * config.in (HAVE_DECL_GETOPT): Add.
221 * aclocal.m4: Regenerate.
222 * addr2line.c: Include "config.h" before "bfd.h" so that
223 HAVE_DECL_GETOPT is defined before getopt.h is included.
225 2005-03-21 Jan-Benedict Glaw <jbglaw@lug-owl.de>
227 * doc/binutils.texi: Document new VAX disassembler-specific option
229 * NEWS: Mention the new option.
231 2005-03-29 Anil Paranjpe <anilp1@kpitcummins.com>
233 * MAINTAINERS: Add myself as H8300 maintainer.
235 2005-03-28 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
237 * objdump.c (disassemble_bytes): Remove cast.
239 2005-03-25 Daniel Jacobowitz <dan@codesourcery.com>
241 * BRANCHES: Add binutils-csl-arm-2005q1-branch and
242 binutils-2_16-branch.
244 2005-03-25 Mark Kettenis <kettenis@gnu.org>
246 * MAINTAINERS: Add myself as M88k maintainer.
248 2005-03-24 Danny Smith <dannysmith@users.sourceforge.net>
250 * winduni.c (unicode_from_ascii): Don't declare variables
251 's' and 'w' if _WIN32. Use MultiByteToWideChar to set the unicode
254 2005-03-24 Dmitry Diky <diwil@spec.ru>
256 * MAINTAINERS: Add myself as MSP430 maintainer.
258 2005-03-23 Nick Clifton <nickc@redhat.com>
260 * po/fr.po: Updated translation.
262 2005-03-22 Nick Clifton <nickc@redhat.com>
264 * MAINTAINERS: Add Daniel Jacobwitz to the blanket write
267 2005-03-17 Paul Brook <paul@codesourcery.com>
268 Dan Jacobowitz <dan@codesourcery.com>
269 Mark Mitchell <mark@codesourcery.com>
271 * binutils/readelf.c (get_arm_segment_type): New function.
272 (get_segment_type): Use it.
274 2005-03-18 Paul Brook <paul@codesourcery.com>
276 * objdump.c (objdump_print_addr): Avoid uninitialized warning.
278 2005-03-17 Diego Novillo <dnovillo@redhat.com>
280 * MAINTAINERS: Remove self as maintainer of x86 intel
283 2005-03-16 Nick Clifton <nickc@redhat.com>
284 Ben Elliston <bje@au.ibm.com>
286 * configure.in (werror): New switch: Add -Werror to the
287 compiler command line. Enabled by default. Disable via
289 * configure: Regenerate.
291 2005-03-15 Daniel Marques <marques@cs.cornell.edu>
292 Nick Clifton <nickc@redhat.com>
294 * objcopy.c (globalize_specific_list): New linked list of symbols
295 to convert from local binding into global binding.
296 (command_line_switch): Add OPTION_GLOBALIZE_SYMBOL and
297 OPTION_GLOBALIZE_SYMBOLS.
298 (copy_options): Add "globalize-symbol" and "globalize-symbols".
299 (copy_usage): Document the new switches.
300 (filter_symbols): Convert defined local symbols mentioned on the
301 globalize_specific_list into global symbols.
302 (copy_object): Perform actions if the globalize_specific_list is
304 (copy_main): Handle new switches.
305 * NEWS: Mention new feature.
306 * doc/binutils.texi: Document new switches.
308 2005-03-15 Alan Modra <amodra@bigpond.net.au>
310 * po/es.po: Commit new Spanish translation.
312 * po/fr.po: Commit new French translation.
314 2005-03-14 Alan Modra <amodra@bigpond.net.au>
316 * po/tr.po: Commit new Turkish translation.
318 2005-03-11 Nick Clifton <nickc@redhat.com>
320 * po/fr.po: Updated French translation.
322 2005-03-10 Nick Clifton <nickc@redhat.com>
324 * configure.in (ALL_LINGUAS): Add Romanian lingua "ro".
325 * configure: Regenerate.
326 * po/ro.po: New file.
328 * po/ru.po: Updated file.
330 2005-03-05 Alan Modra <amodra@bigpond.net.au>
332 * po/binutils.pot: Regenerate.
334 2005-03-02 Jan Beulich <jbeulich@novell.com>
336 * ar.c (remove_output): Use unlink_if_ordinary instead of unlink.
337 * objcopy.c (copy_file): Likewise.
338 (strip_main): Likewise.
340 2005-03-01 Stig Petter Olsroed <stigpo@users.sourceforge.net>
341 Nick Clifton <nickc@redhat.com>
343 * objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
344 (struct objdump_disasm_info): Add 'reloc' field.
345 (disassemble_bytes): Fix check for when an insn has a reloc
346 associated with it. Improve comment explaining why the use of
347 octets is wrong. Set the 'reloc' field in objdump_disasm_info
349 (objdump_print_addr): Use new 'reloc' field to lookup the correct
350 address for the symbol associated with the current instruction's
352 (disassemble_info): Initialise 'reloc' field.
354 2005-02-28 Jakub Jelinek <jakub@redhat.com>
356 * readelf.c (get_file_type, get_machine_name, get_osabi_name,
357 get_segment_type, get_section_type_name, get_elf_class,
358 get_data_encoding, get_group_flags, dynamic_section_mips_val,
359 get_symbol_binding, get_symbol_type, get_TAG_name, get_FORM_name,
360 get_AT_name, process_mips_specific, process_gnu_liblist,
361 get_note_type, get_netbsd_elfcore_note_type): Use snprintf instead of
362 sprintf where needed.
363 (get_dynamic_type): Likewise. Increase buff to 64 bytes.
364 (get_elf_section_flags): Increase buff to 33 bytes. Avoid
366 (get_dynamic_flags): Renamed to...
367 (print_dynamic_flags): ... this. Print the flags to stdout instead
368 of returning them as string.
369 (process_dynamic_section): Adjust caller.
371 2005-02-25 H.J. Lu <hongjiu.lu@intel.com>
373 * readelf.c (display_debug_ranges): Print out offset for end of
376 2005-02-23 Alan Modra <amodra@bigpond.net.au>
378 * dlltool.c: Warning fixes.
379 * objdump.c: Likewise.
381 2005-02-22 Alan Modra <amodra@bigpond.net.au>
383 * Makefile.am (syslex.o, sysinfo.o): Pass AM_CFLAGS to compiler.
384 (syslex.o, sysinfo.o, dlltool.o, rescoff.o): Remove duplicate
385 dependencies. Run "make dep-am".
386 * nlmconv.c: Warning fixes.
387 * readelf.c: Likewise.
388 * srconv.c: Likewise.
389 * sysdump.c: Likewise.
390 * sysinfo.y: Likewise.
391 * syslex.l: Likewise. Use yyleng instead of strlen, memcpy instead
393 * Makefile.in: Regenerate.
395 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
397 * objcopy.c (parse_flags): Replace SEC_SHARED with
400 * objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
401 SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
402 SEC_COFF_SHARED for COFF only.
404 2005-02-21 Alan Modra <amodra@bigpond.net.au>
406 * Makefile.am: Run "make dep-am"
407 * Makefile.in: Regenerate.
408 * doc/Makefile.in: Regenerate.
410 2005-02-21 Alan Modra <amodra@bigpond.net.au>
412 * readelf.c (BYTE_GET8): Delete. Replace uses with BYTE_GET.
413 (byte_get_little_endian): Don't handle size of -8.
414 (byte_get_signed, byte_get_big_endian): Likewise.
415 (print_dec_vma, print_hex_vma): New functions.
416 (print_vma): Use them. Return chars output.
417 (get_dynamic_data): Return a bfd_vma array. Add ent_size parm.
418 (process_symbol_table): Handle alpha and s390 .hash.
420 2005-02-18 H.J. Lu <hongjiu.lu@intel.com>
422 * readelf.c (display_debug_loc): Print out offset for end of
425 2005-02-18 Joseph S. Myers <joseph@codesourcery.com>
427 * Makefile.am (TOOL_PROGS): Add objdump.
428 * Makefile.in: Regenerate.
430 2005-02-17 Alan Modra <amodra@bigpond.net.au>
432 * deflex.l (YY_NO_UNPUT): Define.
433 * rclex.l (YY_NO_UNPUT): Define.
434 * rcparse.y (null_unichar): New static var.
435 (res_null_text): Use it rather than attempting to init from wchar_t.
436 * windres.c: Include assert.h and time.h before getopt.h.
437 Include config.h and unistd.h too.
439 2005-02-15 Nick Clifton <nickc@redhat.com>
441 * nlmconv.c: Provide a full prototype for the localtime() function
442 in order to avoid a compile time warning.
444 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
446 * readelf.c (group_count): Don't initialize it.
447 (process_section_groups): Reurn 1 if we won't do unwind nor
448 section groups. Set group_count to 0 before counting group
449 sections and return 1 if there are no group sections. Reread
450 SHT_SYMTAB/SHT_STRTAB sections only when needed. Don't skip
452 (process_object): Only set do_unwind to 0 if
453 process_section_groups return 0.
455 2005-02-10 Ian Lance Taylor <ian@airs.com>
457 * MAINTAINERS: Update my e-mail address.
459 2005-02-10 Mark Mitchell <mark@codesourcery.com>
461 * MAINTAINERS: Add Paul Brook and Mark Mitchell as ARM (Symbian)
464 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
466 * MAINTAINERS: Add self as maintainer of MAXQ.
468 2005-01-31 Richard Sandiford <rsandifo@redhat.com>
470 * readelf.c (eh_addr_size): New variable.
471 (find_section): Move earlier in file. Return empty sections too.
472 (process_program_headers): Use find_section to find .dynamic.
473 (process_section_headers): Initialize eh_addr_size.
474 (dump_ia64_unwind, slurp_ia64_unwind_table, ia64_process_unwind)
475 (dump_hppa_unwind, slurp_hppa_unwind_table, hppa_process_unwind)
476 (display_debug_frames): Use it instead of local addr_size variable.
477 (size_of_encoded_value): Get pointer size from eh_addr_size rather
480 2005-01-31 Andrew Cagney <cagney@gnu.org>
482 * configure: Regenerate to track ../gettext.m4.
484 2005-01-31 Nick Clifton <nickc@redhat.com>
486 * version.c (print_version): Bump the copyright date to 2005.
488 2005-01-25 Alan Modra <amodra@bigpond.net.au>
490 * nm.c (display_rel_file): Read dynamic syms before calling
491 bfd_get_synthetic_symtab.
493 2005-01-21 Ben Elliston <bje@au.ibm.com>
495 * dlltool.c (dump_iat): Remove unused function.
496 (gen_exp_file): Remove #if 0'd code.
497 (make_one_lib_file): Likewise.
498 * srconv.c: Remove #if 0'd code throughout.
499 * size.c (lprint_number): Remove.
500 (print_berkeley_format): Remove #if 0'd code.
501 * ar.c (do_quick_append): Remove declaration and definiton.
502 (main): Remove #if 0'd code.
503 * filemode.c (filemodestring): Remove #if 0'd function.
504 * sysdump.c (unit_info_list): Remove function.
505 (object_body_list): Likewise.
506 (program_structure): Likewise.
507 (debug_list): Likewise.
508 (module): Remove #if 0'd code.
510 2005-01-20 Mark Mitchell <mark@codesourcery.com>
512 * BRANCHES: Add binutils-2_15-branch.
514 * MAINTAINERS: Document branch policy.
515 * BRANCHES: New file.
517 2005-01-19 Fred Fish <fnf@specifixinc.com>
519 * NEWS: Make note of the new MIPS disassembly option "no-aliases".
520 * doc/binutils.texi (objdump): Document the "no-aliases"
523 2005-01-17 Eugene Kotlyarov <ekot@narod.ru>
526 * rcparse.y (RCDATA): Allow a filename to be supplied as the
527 parameter. Parse it with define_rcdata_file().
528 * resrc.c (define_rcdata_file): New function.
529 * windres.h: Provide a prototype for the new function.
531 * resrc.c (define_user_file): Fix typo by replacing "font file"
534 2005-01-16 Jason Thorpe <thorpej@netbsd.org>
536 * MAINTAINERS: Update my email address.
538 2005-01-16 Danny Smith <dannysmith@users.sourceforge.net>
540 * dlltool.c (set_dll_name_from_def): New function. Strip name
541 to basename, with warning.
543 (def_library): Likwise.
544 (main): Strip arg of --dllname to basename, with warning.
545 Only use basename of exp_name when inferring dll_name.
547 2005-01-11 Nick Clifton <nickc@redhat.com>
550 * doc/binutils.texi (c++filt): Use uppercase CXXFILT in the
551 footnote in order to prevent the sed script in the Makefile from
552 converting it into c++filt.
554 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
557 readelf.c (saved_base_address): Removed.
558 (decode_64bit_range): Likewise.
559 (decode_range): Likewise.
560 (display_64bit_debug_ranges): Likewise.
561 (debug_info): Add range_lists, num_range_lists and
563 (read_and_display_attr_value): Handle do_debug_ranges.
564 (process_debug_info): Likewise.
565 (display_debug_ranges): Rewrite.
566 (process_object): Free range_lists.
568 2005-01-10 Andreas Schwab <schwab@suse.de>
570 * configure.in: Don't define SKIP_ZEROES.
571 * configure: Regenerate.
572 * objdump.c (disassemble_data): Set skip_zeroes and
573 skip_zeroes_at_end in disasm_info to defaults.
574 (DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
575 (DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
577 (disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
580 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
582 * readelf.c (display_debug_loc): Display base address
583 specifiers. Always output <End of list>.
585 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
587 * readelf.c (have_frame_base): New.
588 (need_base_address): Likewise.
589 (saved_base_address): Likewise.
590 (decode_location_expression): Return 1 if DW_AT_frame_base is
592 (debug_info): Add base_address and a have_frame_base pointer.
593 (read_and_display_attr_value): Replace saved_DW_AT_low_pc with
594 saved_base_address. Record base address. Set have_frame_base.
595 Record if a location list has DW_AT_frame_base. Display if a
596 location expression has no DW_AT_frame_base but needs one. Set
597 saved_base_address only if needed.
598 (process_debug_info): Clear have_frame_base, saved_base_address
599 and set need_base_address.
600 (display_debug_loc): Display if a location expression has no
601 DW_AT_frame_base but needs one. Display if start >= end. Don't
602 adjust for section address. Properly handle base address.
603 (process_object): Free the have_frame_base pointer in
606 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
608 * readelf.c (display_debug_loc): Display offsets for hole and
610 (display_debug_str): Add a newline at the end.
612 2005-01-04 Armin Diehl <diehl@nordrhein.de>
615 * nlmconv.c (main): Only store the basename of the output filename
618 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
621 * readelf.c (process_debug_info): New.
622 (debug_info): Add num_loc_offsets, loc_offsets and
624 (get_debug_info): Use process_debug_info.
625 (display_debug_loc): Properly handle location list. Warn if bad
626 location lists are encoutnered.
627 (read_and_process_attr_value): New.
628 (read_and_display_attr_value): Use "%lx" for DW_FORM_data4.
629 (display_debug_info): Use process_debug_info.
630 (process_object): Also free loc_offsets in debug_information.
632 2004-12-31 Alan Modra <amodra@bigpond.net.au>
634 * objdump.c (remove_useless_symbols): Discard section symbols.
636 2004-12-27 H.J. Lu <hongjiu.lu@intel.com>
638 * readelf.c (read_leb128): Support 64bit host.
640 2004-12-23 Nick Clifton <nickc@redhat.com>
643 * readelf.c (debug_info): Add 'cu_offset' field.
644 (get+pointer_size_of_comp_unit): Rename to
645 'get_pointer_size_and_offset_of_comp_unit'. Add code to return
646 the offset of the comp_unit if requested.
647 (get_debug_info): Record comp_unit offsets as well.
648 (display_debug_lines): Call get_pointer_size_of_comp_unit.
649 (decode_location_expression): Add an extra parameter - the offset
650 of the current comp-unit. Use this when decoding the DW_OP_call2
651 and DW_OP_call4 operators.
652 (display_debug_loc): Call get_pointer_size_of_comp_unit, pass the
653 comp_unit offset on the decode_location_expression.
654 (read_and_display_attr_value): Pass the comp_unit offset on the
655 decode_location_expression.
656 (display_debug_frames): Pass 0 as the comp_unit offset to
657 decode_location_expression.
659 2004-12-22 Nick Clifton <nickc@redhat.com>
661 * readelf.c (last_pointer_size, warned_about_missing_comp_units):
662 New variables associated with obtaining the pointer size for a
664 (get_pointer_size_of_comp_unit): Add an extra parameter - the name
665 of the section requesting the pointer size. Use this name in
666 error messages. If there are not enough comp_units available
667 produce a warning message, but return the last known pointer size
668 so that section dumping can continue.
669 (get_debug_info): Reset the new variables.
670 (display_debug_lines): Add extra parameter to invocation of
671 get_pointer_size_of_comp_unit and remove error message when it
673 (display_debug_loc): Likewise.
675 2004-12-15 Jan Beulich <jbeulich@novell.com>
677 * doc/binutils.texi: Document --strip-unneeded-symbol and
678 --strip-unneeded-symbols.
679 * objcopy.c (strip_unneeded_list): New.
680 (enum command_line_switch): Add OPTION_STRIP_UNNEEDED_SYMBOL
681 and OPTION_STRIP_UNNEEDED_SYMBOLS.
682 (copy_options): Add --strip-unneeded-symbol and
683 --strip-unneeded-symbols.
684 (copy_usage): Likewise.
685 (filter_symbols): Suppress copying of symbol if in strip_unneeded_list
686 and the symbol is not needed.
687 (copy_main): Handle OPTION_STRIP_UNNEEDED_SYMBOL and
688 OPTION_STRIP_UNNEEDED_SYMBOLS.
690 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
692 * readelf.c (get_machine_flags): Handle E_MIPS_MACH_9000.
694 2004-12-08 Ben Elliston <bje@au.ibm.com>
696 * arlex.l: Fix formatting.
698 2004-12-08 Ben Elliston <bje@au.ibm.com>
700 * doc/Makefile.am (config.texi): Emit a @set UPDATED command to
701 config.texi whose value is the current month and year.
702 * doc/Makefile.in: Rebuild.
703 * doc/binutils.texi: Set the document subtitle to be the value of
704 the Texinfo UPDATED variable (obtained from config.texi).
706 2004-12-07 Ben Elliston <bje@au.ibm.com>
709 * doc/binutils.texi (def file format): New node.
710 (dlltool): Use the tool name as the @chapter name, like all the
711 other binutils. Use @file{.def} throughout for consistency.
713 2004-12-06 Ben Elliston <bje@au.ibm.com>
715 * dlltool.c: Comment fix.
717 2004-12-06 Ben Elliston <bje@au.ibm.com>
719 * doc/binutils.texi: Update copyright years.
721 2004-12-03 Richard Sandiford <rsandifo@redhat.com>
723 * MAINTAINERS: Remove mention of config.if.
725 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
727 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
728 * Makefile.in: Regenerate.
730 2004-11-10 Ian Lance Taylor <ian@wasabisystems.com>
733 * stabs.c (stab_demangle_template): Call stab_demangle_count
734 rather than stab_demangle_get_count to get the length of a pointer
737 2004-11-10 Danny Smith <dannysmith@users.sourceforge.net>
739 * defparse.y: Remove unnecessary commas from token list.
741 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
743 * doc/binutils.texi (nm): Update description of weak symbols.
745 2004-11-03 Nick Clifton <nickc@redhat.com>
747 * readelf.c (do_debug_ranges): New variable.
748 (usage): Document new switch: -wR or --debug-dump=Ranges.
749 (parse_args): Handle new switch. Replace switch statement for the
750 long options with a more compact table structure.
751 (process_section_headers): Allow the dumping of .debug_ranges
752 sections if so requested.
753 (debug_displays): Likewise.
754 (load_debug_range): New function: Grabs the contents of a
755 .debug_ranges section.
756 (free_debug_range): New function: Releases the grabbed
757 .debug_ranges section.
758 (decode_64bit_range): New function: Displays a 64-bit range in a
759 .debug_ranges section.
760 (decode_range): New function: Displays a 32-bit range in a
761 .debug_ranges section.
762 (read_and_display_attr_value): Record the value of DW_AT_low_pc
763 attributes. Use decode_ranges() to display a DW_AT_ranges
765 (display_debug_info): Use load_debug_range() and
767 (display_64bit_debug_ranges): New function. Displays the contents
768 of a 64-bit format .debug_ranges section.
769 (display_debug_ranges): New function: Displays the contents of a
770 32-bit .debug_ranges section.
772 (main): Move cmdline_dump_sects and num_cmdline_dump_sects into the
774 (process_object): Initialise the dump_sects array from the
775 cmdline_dump_sects array before processing each object file.
777 (streq, strneq): New macros. Use them to replace occurrences of
778 strcmp() and strncmp().
780 (debug_information): New structure array to replace
781 debug_line_pointer_sizes array.
782 (num_debug_info_entries): New variable to replace
783 num_debug_line_pointers.
784 (get_pointer_size_of_comp_unit): New function: Returns the pointer
785 size of a given compilation unit.
786 (get_debug_info): New function to replace
787 get_debug_line_pointer_sizes.
788 (display_debug_lines): Use the new functions.
789 (display_debug_loc): Likewise.
791 (disassemble_section): Change return type to int.
792 (display_debug_lines): Move local variables to their
794 (display_debug_section): Likewise. Also record the return value
795 of functions called and pass this back to the parent. Also only
796 warn about undumped sections when the user explicitly requested
799 (debug_apply_rela_addends): Allow relocations against STT_OBJECT
802 * NEWS: Mention the support for decoding .debug_ranges sections.
803 * doc/binutils.texi: Document the new command line switch to
806 2004-11-03 Randolph Chung <tausq@debian.org>
808 * readelf.c (ia64_unw_aux_info, ia64_unw_table_entry): Rename from
809 unw_aux_info and unw_table_entry.
810 (find_symbol_for_address): Pass symtab and strtab info explicitly.
811 (dump_ia64_unwind): Rename unw_{aux_info,table_entry} with ia64_
813 (slurp_ia64_unwind_table): Likewise.
814 (ia64_process_unwind): Rename from old process_unwind.
815 (hppa_unw_aux_info): New.
816 (dump_hppa_unwind): New.
817 (slurp_hppa_unwind_table): New.
818 (hppa_process_unwind): New.
819 (process_unwind): Factor out common unwinding checks; dispatch to
820 unwind handler based on machine type.
822 2004-11-02 Nick Clifton <nickc@redhat.com>
824 * readelf.c (display_debug_lines): Fix typo in error message.
826 2004-10-26 Mark Mitchell <mark@codesourcery.com>
828 * readelf.c (get_note_type): Handle notes not in core files.
829 (process_note_sections): New function.
830 (process_corefile_contents): Rename to ...
831 (process_notes): ... this.
832 (process_object): Call process_notes, not
833 process_corefile_contents.
834 * doc/binutils.texi: Update readelf -n documentation.
836 2004-10-26 Jakub Jelinek <jakub@redhat.com>
838 * ar.c (extract_file): Set atime to mtime for ar xo.
840 2004-10-25 Ian Lance Taylor <ian@wasabisystems.com>
842 * stabs.c (stab_demangle_v3_arglist): New static function, broken
843 out of stab_demangle_v3_argtypes.
844 (stab_demangle_v3_argtypes): Call it.
845 (stab_demangle_v3_arg): Handle DEMANGLE_COMPONENT_FUNCTION_TYPE.
846 If we find an unrecognized component, print out its number.
848 2004-10-25 David Mosberger <davidm@hpl.hp.com>
850 * readelf.c (slurp_ia64_unwind_table): Support relocations against
851 non-section symbols by adding in the symbol value.
853 2004-10-25 Nick Clifton <nickc@redhat.com>
856 * readelf.c (dynamic_strings_length): New global variable.
857 (VALID_DYNAMIC_NAME, GET_DYNAMIC_NAME): New macros for accessing
858 strings in the dynamic string table.
859 (process_section_headers): Initialise dynamic_strings_length.
860 (process_dynamic_section): Likewise.
861 (process_object): Reset dynamic_string_length when the buffer is freed.
862 (dynamic_sections_mips_val): Use the new macros.
863 (process_dynamic_section): Likewise.
864 (process_version_sections): Likewise.
865 (process_symbol_table): Likewise.
866 (process_syminfo): Likewise.
867 (process_mips_specific): Likewise.
868 (dump_relocations): Add a new parameter 'strtablen' and use this
869 to verify that string offset in a given reloc is valid. Print a
870 suitable error message otherwise.
871 (process_relocs): Pass the new argument to dump_relocations.
873 2004-10-23 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
875 * dlltool.c: Include <assert.h>.
876 (PREFIX_ALIAS_BASE): Define.
877 (struct export): Add member import_name;
878 (def_exports): Set import_name.
879 (make_one_lib_file): Remove prefix alias code, use import_name
881 (gen_lib_file): Create and delete aliases.
883 2004-10-19 H.J. Lu <hongjiu.lu@intel.com>
885 * readelf.c (process_section_groups): Free symtab after use.
887 2004-10-18 Tommy Pettersson <ptp@lysator.liu.se>
888 Nick Clifton <nickc@redhat.com>
890 * strings.c (usage): Place radix values for -t option into the
893 * objcopy.c (add_redefine_syms_file): Change error messages to use
894 <filename>:<linenumber>: format for easier parsing by automatic
897 * srconv.c (show_usage): Fix spelling typo.
899 * windres.c (format_from_filename): Suggest the use of -J instead
900 of -I if the file type cannot be determined.
902 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
904 * strings.c: Include <sys/stat.h>.
906 2004-10-18 Alan Modra <amodra@bigpond.net.au>
908 * budemang.c (demangle): Fix thinko.
910 * budemang.c (demangle): Handle "@plt" suffix.
912 2004-10-14 Nick Clifton <nickc@redhat.com>
914 * nm.c (usage): Fix description of --special-syms switch.
916 2004-10-13 Jakub Jelinek <jakub@redhat.com>
918 * strings.c (statbuf): New typedef.
920 (strings_object_file): Avoid using get_file_size, instead do the
921 checks here, using file_stat.
922 * configure.in (HAVE_STAT64): New test.
923 * configure: Rebuilt.
924 * config.in: Rebuilt.
926 2004-10-12 Paul Brook <paul@codesourcery.com>
928 * readelf.c (decode_ARM_machine_flags): Support EABI version 4.
930 2004-10-11 Alan Modra <amodra@bigpond.net.au>
932 * objdump.c (dump_symbols): Fix thinko last change. Improve error
935 2004-10-08 Nick Clifton <nickc@redhat.com>
937 * nm.c: Add a new switch --special-syms which, if enabled, will
938 include the ARM Mapping symbols in nm's output.
939 (usage): Mention the switch.
940 (filter_symbols): Handle the switch.
941 * objdump.c: Add a similar switch.
942 (usage): Mention the switch.
943 (dump_symbols): Handle the switch.
944 * doc/binutils.texi: Document the new switches.
945 * NEWS: Mention the new switches.
947 2004-10-08 Daniel Jacobowitz <dan@debian.org>
949 * readelf.c (get_x86_64_section_type_name): New function.
950 (get_section_type_name): Use it.
952 2004-10-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
954 * dlltool.c (make_one_lib_file): Revert 2004-09-02 and 2004-09-04
956 * doc/binutils.texi (dlltool): Revert 2004-09-06 patch.
958 2004-10-07 Alexandre Oliva <aoliva@redhat.com>
960 * readelf.c (get_machine_flags): Don't fall through into m68k cpu
963 2004-10-01 Paul Brook <paul@codesourcery.com>
965 * readelf.c (get_arm_section_type_name): New function.
966 (get_section_type_name): Use it.
968 2004-09-28 Nick Clifton <nickc@redhat.com>
970 * nm.c: Reorder functions to eliminate most of the static function
973 2004-09-22 Alan Modra <amodra@bigpond.net.au>
975 * readelf.c (process_program_headers): Don't include .tbss in non-TLS
978 2004-09-17 Alan Modra <amodra@bigpond.net.au>
980 * Makefile.am: Run "make dep-am".
981 * Makefile.in: Regenerate.
982 * config.in: Regenerate.
983 * configure: Regenerate.
984 * doc/Makefile.in: Regenerate.
985 * po/binutils.pot: Regenerate.
987 2004-09-12 Alan Modra <amodra@bigpond.net.au>
989 * readelf.c (decode_location_expression): Sign extend value for
990 DW_OP_const1s, DW_OP_const2s, DW_OP_const4s, DW_OP_bra, DW_OP_skip.
992 2004-09-09 Nick Clifton <nickc@redhat.com>
995 * ar.c (replace_members): Do not use get_file_size as
996 ar_emul_append correctly handles missing files.
998 2004-09-07 H.J. Lu <hongjiu.lu@intel.com>
1000 * configure: Regenerated with autconfig 2.13.
1002 2004-09-06 Danny Smith <dannysmith@users.sourceforge.net>
1004 * doc/binutils.texi (dlltool): Update --add-underscore, --kill-at
1007 2004-09-06 Michael Wardle <mbw@endbracket.net>
1009 * doc/binutils.texi (objdump): Document that the -x switch includes
1010 the effect of the -p switch.
1012 2004-09-04 Danny Smith <dannysmith@users.sourceforge.net>
1014 * dlltool.c (make_one_lib_file): Test if internal_name was
1015 specified by user before using it.
1017 2004-09-02 Carlo Wood <carlo@alinoe.com>
1020 * dlltool.c (make_one_lib_file): For IDATA6 take the name from
1021 exp->internal_name if it is present.
1023 2004-09-02 Alexandre Oliva <aoliva@redhat.com>
1025 * MAINTAINERS: Add self as co-maintainer of FR-V.
1026 * readelf.c (get_machine_flags): Print FR-V cpu types.
1028 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1030 * nm.c (show_synthetic): New var.
1031 (long_options): Add "synthetic".
1033 (display_rel_file): Handle show_synthetic.
1035 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1037 * objdump.c (dump_bfd): Pass both symbol tables to
1038 bfd_get_synthetic_symtab.
1040 2004-08-17 Jakub Jelinek <jakub@redhat.com>
1042 * objdump.c (dump_bfd): For relocatable objects, pass syms instead
1043 of dynsyms to bfd_get_synthetic_symtab.
1045 2004-08-16 Alan Modra <amodra@bigpond.net.au>
1047 * readelf.c (debug_apply_rela_addends): New function, extracted from..
1048 (display_debug_info): ..here.
1049 (display_debug_frames): Call debug_apply_rela_addends. Don't do
1050 DW_EH_PE_pcrel adjustment for ET_REL.
1052 2004-08-06 Andreas Schwab <schwab@suse.de>
1054 * readelf.c (dump_relocations): Fix typo when calculating
1057 2004-08-02 Jakub Bogusz <qboosh@pld-linux.org>
1059 * dllwrap.c (deduce_name): Fix typos introduced when program_name
1060 was renamed to prog_name.
1062 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
1064 * readelf.c (get_machine_flags <EM_SH>): Handle EF_SH2A and
1067 2004-07-28 Alexandre Oliva <aoliva@redhat.com>
1069 2003-07-08 Alexandre Oliva <aoliva@redhat.com>
1070 * readelf.c (get_machine_flags <EM_SH)): Handle EF_SH4_NOFPU and
1072 2003-06-12 Alexandre Oliva <aoliva@redhat.com>
1073 * readelf.c (get_machine_flags <EM_SH>): Print SH ISA name.
1075 2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
1077 * objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
1079 * objdump.c (dump_section_header): Likewise.
1081 2004-07-15 Aravinda PR <aravindapr@rediffmail.com>
1083 * nlmconv.c (main): Pass map_file argument to link_inputs.
1084 (link_inputs): Use map_file argument if it is defined.
1086 2004-07-13 Nick Clifton <nickc@redhat.com>
1088 * dllwrap.c: Replace 'program_name' with 'prog_name' to avoid
1089 conflicts with exported global defined in bucomm.h.
1090 (deduce_name): Rename parameter 'program_name' to 'name' to avoid
1091 shadowing the global defined in bucomm.h.
1093 2004-07-12 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1095 * dlltool.c (ext_prefix_alias): New global variable.
1096 (make_one_lib_file): Add aliases with prefixes for external
1097 and import definitions.
1098 (usage): Document -p option.
1099 (long_options): Add --ext-prefix-alias option.
1101 * doc/binutils.texi: Document new switch.
1102 * NEWS: Mention new switch.
1104 2004-07-09 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1106 * binutils/dlltool.c (asm_prefix): Add parameter: name.
1107 No underscore for symbols beginning with ?.
1108 (ASM_PREFIX): Add parameter: NAME.
1109 (gen_exp_file): Use new parameter.
1110 (make_label): Likewise.
1111 (make_imp_label): Likewise.
1112 (make_one_lib_file): Likewise.
1114 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
1116 * MAINTAINERS: Added myself to the list.
1117 * readelf.c: Include "elf/crx.h".
1118 (guess_is_rela): Handle EM_CRX.
1119 (get_machine_name): Likewise.
1120 (dump_relocations): Likewise.
1122 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1124 * doc/binutils.texi (nm): Clarify weak symbol description.
1126 2004-06-24 Ben Elliston <bje@au.ibm.com>
1128 * readelf.c (get_segment_type): Display "GNU_STACK", not just
1129 "STACK", when a PT_GNU_STACK segment is encountered.
1131 2004-06-24 Alan Modra <amodra@bigpond.net.au>
1133 * objcopy.c (copy_section): Don't set _cooked_size.
1135 2004-06-22 Alan Modra <amodra@bigpond.net.au>
1137 * readelf.c (Elf32_Word): Delete.
1138 (get_32bit_dynamic_section): Handle SGI ELF dynamic segment.
1139 (get_64bit_dynamic_section): Likewise.
1141 * readelf.c (get_32bit_dynamic_section): Stop at first DT_NULL entry.
1142 (get_64bit_dynamic_section): Likewise.
1144 * readelf.c (dynamic_nent): New variable.
1145 (get_32bit_dynamic_section): Set it.
1146 (get_64bit_dynamic_section): Here too.
1147 (process_dynamic_section): Use it instead of dynamic_size.
1148 (process_syminfo): Likewise.
1150 * readelf.c (get_32bit_dynamic_section): Correct number of entries
1151 translated from external to internal form.
1152 (get_64bit_dynamic_section): Likewise.
1154 2004-06-18 Jie Zhang <zhangjie@magima.com.cn>
1156 * readelf.c (process_program_headers): When locating the dynamic
1157 section use the section table if it is present.
1158 (dynamic_segment): Renamed to dynamic_section.
1159 Replace references to dynamic segment with references to dynamic
1160 section, except where appropriate.
1161 (dynamic_segment_mips_val): Rename to dynamic_section_mips_val.
1162 (dynamic_segment_parisc_val): Rename to dynamic_section_parisc_val.
1163 (dynamic_segment_ia64_val): Rename to dynamic_section_ia64_val.
1164 (get_32bit_dynamic_segment): Rename to get_32bit_dynamic_section.
1165 Remove tag counting code as it is no longer needed.
1166 (get_64bit_dynamic_segment): Rename to get_64bit_dynamic_section.
1167 Remove tag counting code as it is no longer needed.
1168 (process_dynamic_segment): Rename to process_dynamic_section.
1170 2004-06-15 Alan Modra <amodra@bigpond.net.au>
1172 * objcopy.c (copy_section): Use bfd_get_section_size instead of
1173 _raw_size or bfd_get_section_size_before_reloc. Don't set reloc_done.
1174 (compare_section_lma): Likewise.
1175 * addr2line.c (find_address_in_section): Likewise.
1176 * coffgrok.c (do_sections_p1): Likewise.
1177 * dlltool.c (scan_drectve_symbols): Likewise.
1178 * nlmconv.c (main): Likewise.
1179 (copy_sections): Likewise.
1180 (powerpc_mangle_relocs): Likewise.
1181 * objdump.c (disassemble_section): Likewise.
1182 * prdbg.c (find_address_in_section): Likewise.
1183 * size.c (berkeley_sum): Likewise.
1184 * srconv.c (wr_ob): Likewise.
1185 * strings.c (strings_a_section): Likewise.
1187 2004-05-28 Ian Lance Taylor <ian@wasabisystems.com>
1189 * readelf.c (decode_ARM_machine_flags): Add EF_ARM_VFP_FLOAT.
1191 2004-05-17 David Heine <dlheine@tensilica.com>
1193 * objcopy.c (setup_bfd_headers): New function.
1194 (copy_object): Call setup_bfd_headers.
1196 2004-05-13 Paul Brook <paul@codesourcery.com>
1198 * readelf.c (display_debug_frames): Handle dwarf3 format CIE
1201 2004-05-13 Nick Clifton <nickc@redhat.com>
1203 * po/fr.po: Updated French translation.
1205 2004-05-11 Jakub Jelinek <jakub@redhat.com>
1207 * readelf.c (get_segment_type): Handle PT_GNU_RELRO.
1209 2004-05-07 H.J. Lu <hongjiu.lu@intel.com>
1211 * readelf.c (section_groups): New.
1213 (section_headers_groups): New.
1214 (process_section_groups): Populate group_count, section_groups
1215 and section_headers_groups.
1216 (process_unwind): Support section group.
1217 (process_object): Always call process_section_groups. Free
1218 section_groups and section_headers_groups.
1220 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
1222 * readelf.c (process_section_headers): Use %3lu on sh_info.
1224 2004-04-30 Michael Deutschmann <michael@talamasca.ocis.net>
1226 * ranlib.sh: Quote $1 argument in case it contains spaces.
1228 2004-04-27 John Paul Wallington <jpw@gnu.org>
1230 * objcopy.c (copy_usage, strip_usage): Fix spelling.
1232 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
1234 * readelf.c (do_section_groups): New.
1235 (options): Add --section-groups/-g.
1236 (usage): Mention --section-groups/-g.
1237 (parse_args): Support --section-groups/-g.
1238 (get_group_flags): New.
1239 (process_section_groups): New.
1240 (process_object): Call process_section_groups.
1242 2004-04-24 Alan Modra <amodra@bigpond.net.au>
1244 * objdump.c (disassemble_section): Don't disassemble sections
1245 without SEC_HAS_CONTENTS.
1247 2004-04-22 Jakub Jelinek <jakub@redhat.com>
1249 * objdump.c (synthsyms, synthcount): New variables.
1250 (disassemble_data): Use dynsyms for stripped binaries or libraries.
1251 Add synthetized symbols.
1252 (dump_bfd): For disassemble, initialize dynsyms always and
1253 also synthsyms. Free synthsyms and clear {sym,dynsym,synth}count
1256 2004-04-14 Alan Modra <amodra@bigpond.net.au>
1258 * strings.c (print_strings): Cast file_off to unsigned long in
1261 2004-04-07 Benjamin Monate <benjamin.monate@cea.fr>
1264 * arsup.c (ar_save): Use smart_rename.
1266 2004-04-01 Dean Luick <luick@cray.com>
1268 * readelf.c (display_debug_pubnames): Align offset and data
1270 (read_and_display_attr_value): Add missing break;
1271 (debug_displays): Enable the display of the .debug_pubtypes
1274 2004-03-30 Stan Shebs <shebs@apple.com>
1276 * mpw-config.in, mpw-make.sed, mac-binutils.r: Remove MPW
1277 support files, no longer used.
1279 2004-03-23 Paul Brook <paul@codesourcery.com>
1281 * readelf.c (decode_ARM_machine_flags): Add EABI v3.
1283 2004-03-21 Richard Henderson <rth@redhat.com>
1285 * readelf.c (display_debug_frames): Don't crash for mismatched
1286 DW_CFA_restore_state.
1288 2004-03-19 Alan Modra <amodra@bigpond.net.au>
1290 * Makefile.am: Run "make dep-am".
1291 * Makefile.in: Regenerate.
1292 * aclocal.m4: Regenerate.
1293 * config.in: Regenerate.
1294 * configure: Regenerate.
1295 * po/binutils.pot: Regenerate.
1297 2004-03-15 Nathan Sidwell <nathan@codesourcery.com>
1299 * objdump.c (struct SFILE): Replace current pointer with pos
1300 offset, rename size to alloc.
1301 (objdump_sprintf): Avoid unnecessary copies in the common case
1302 (disassemble_bytes): Keep sfile live throughout the
1303 function. Adjust usage appropriately.
1305 2004-03-10 Ben Elliston <bje@gnu.org>
1307 * MAINTAINERS: Update my mail address.
1309 2004-03-08 Danny Smith <dannysmith@users.sourceforge.net>
1311 * deflex.l: Handle "PRIVATE" string.
1312 * defparse.y (%token): Add PRIVATE.
1313 (%type): Add opt_PRIVATE.
1314 (expline): Pass opt_PRIVATE to def_exports.
1315 (opt_PRIVATE): Handle PRIVATE token.
1316 * dlltool.h (def_exports): Add 7th param for private flag to
1318 * dlltool.c: Add PRIVATE to comment on EXPORTS syntax.
1319 (struct export): Add 'private' field.
1320 (def_exports): Set 'private' field of struct exports.
1321 (scan_drectve_symbols): Adjust calls to def_exports.
1322 (scan_filtered_symbols): Likewise.
1323 (dump_def_info): Print 'private' field.
1324 (gen_def_file): Likewise.
1325 (gen_lib_file): Skip generation of lib object if private.
1326 Delete tmp object files in same order as they were generated.
1327 Don't delete non-existent private object files.
1329 2004-02-27 Andreas Schwab <schwab@suse.de>
1331 * ar.c (main): Support POSIX-compatible argument parsing.
1333 2004-02-23 Daniel Lucq <daniel@lucq.org>
1335 * readelf.c (process_mips_specific): Print conflictsno as an
1338 2004-02-21 Dmitry Timoshkov <dmitry@baikal.ru>
1340 * dlltool.c (gen_exp_file): Always output names for forwarded symbols.
1342 2004-02-19 Jakub Jelinek <jakub@redhat.com>
1344 * objcopy.c (copy_section): Avoid warnings.
1346 2004-02-14 Andrew Cagney <cagney@redhat.com>
1348 * ar.c (remove_output): Use bfd_cache_close.
1349 * arsup.c (ar_end): Ditto.
1351 2004-01-21 Roland McGrath <roland@redhat.com>
1353 * readelf.c (get_note_type): Match NT_AUXV.
1355 2004-01-20 Nick Clifton <nickc@redhat.com>
1357 * version.c (print_version): Update copyright year to 2004.
1359 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1361 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
1363 * aclocal.m4: Regenerate.
1364 * configure: Regenerate.
1366 2004-01-12 Jakub Jelinek <jakub@redhat.com>
1368 * objcopy.c: Include elf-bfd.h.
1369 (is_strip_section): Don't strip debugging sections if
1371 (setup_section): If STRIP_NONDEBUG make SEC_ALLOC sections
1372 ~(SEC_LOAD | SEC_HAS_CONTENTS) and on ELF targets also SHT_NOBITS.
1374 * objcopy.c (copy_section): Free relpp if relcount == 0.
1376 2004-01-12 Ian Lance Taylor <ian@wasabisystems.com>
1378 * stabs.c (parse_stab_argtypes): Handle g++ ABI version 3 names.
1379 (stab_demangle_argtypes): Likewise.
1380 (stab_demangle_v3_argtypes): New static function.
1381 (stab_demangle_v3_arg): New static function.
1383 2004-01-12 Nick Clifton <nickc@redhat.com>
1385 * objcopy.c (copy_object): Make the function boolean, returning
1387 (copy_archive): Handle the return value from copy_object.
1388 (copy_file): Likewise.
1390 2004-01-07 Nick Clifton <nickc@redhat.com>
1392 * readelf.c (find_section): New function. Locates a named
1394 (get_debug_line_pointer_sizes): New function: Initialises the
1395 debug_line_pointer_sizes array.
1396 (display_debug_lines): Call get_debug_line_pointer_sizes.
1397 (display_debug_loc): Likewise.
1398 (load_debug_loc): Use find_section.
1399 (load_debug_str): Likewise.
1400 (display_debug_info): Likewise.
1401 (prescan_debug_info): Delete.
1402 (debug_displays): Remove prescan field.
1403 (process_section_contents): Do not perform prescans.
1405 2004-01-03 Alan Modra <amodra@bigpond.net.au>
1407 * objcopy.c (filter_bytes): Delete. Move code to..
1408 (copy_section): ..here. Simplify size adjustment. Divide
1409 section lma by interleave.
1411 2004-01-02 Nick Clifton <nickc@redhat.com>
1413 * po/ru.po: New file: Russian translation.
1414 * configure.in (ALL_LINGUAS): Add ru
1415 * configure: Regenerate.
1417 For older changes see ChangeLog-0203
1423 version-control: never