binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright (C) 2012-2021 Free Software Foundation, Inc.
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36 LEXLIB = @LEXLIB@
  37
  38 # Automake 1.10+ disables lex and yacc output file regeneration if
  39 # maintainer mode is disabled.  Avoid this.
  40 am__skiplex =
  41 am__skipyacc =
  42
  43 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
  44 # -I../zlib, unless we were configured with --with-system-zlib, in which
  45 # case both are empty.
  46 ZLIB = @zlibdir@ -lz
  47 ZLIBINC = @zlibinc@
  48
  49 DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
  50 DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
  51
  52 WARN_CFLAGS = @WARN_CFLAGS@
  53 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
  54 NO_WERROR = @NO_WERROR@
  55 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
  56 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
  57 LIBICONV = @LIBICONV@
  58
  59 # these two are almost the same program
  60 AR_PROG=ar
  61 RANLIB_PROG=ranlib
  62
  63 # objcopy and strip should be the same program
  64 OBJCOPY_PROG=objcopy
  65 STRIP_PROG=strip-new
  66
  67 STRINGS_PROG=strings
  68
  69 READELF_PROG=readelf
  70
  71 ELFEDIT_PROG=elfedit
  72
  73 # These should all be the same program too.
  74 SIZE_PROG=size
  75 NM_PROG=nm-new
  76 OBJDUMP_PROG=objdump
  77
  78 # This is the demangler, as a standalone program.
  79 # Note: This one is used as the installed name too, unlike the above.
  80 DEMANGLER_PROG=cxxfilt
  81
  82 ADDR2LINE_PROG=addr2line
  83
  84 DLLTOOL_PROG=dlltool
  85 WINDRES_PROG=windres
  86 WINDMC_PROG=windmc
  87 DLLWRAP_PROG=dllwrap
  88
  89 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  90
  91 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  92
  93 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  94 EXTRA_SCRIPTS = embedspu
  95
  96 ## Test programs.
  97 BFDTEST1_PROG = bfdtest1
  98 BFDTEST2_PROG = bfdtest2
  99 GENTESTDLLS_PROG = testsuite/gentestdlls
 100
 101 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
 102
 103 ## We need a special rule to install the programs which are built with
 104 ## -new, and to rename cxxfilt to c++filt.
 105 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
 106 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
 107
 108 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
 109
 110 # Stuff that goes in tooldir/ if appropriate.
 111 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
 112
 113 BASEDIR = $(srcdir)/..
 114 BFDDIR = $(BASEDIR)/bfd
 115 INCDIR  = $(BASEDIR)/include
 116
 117 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 118          @HDEFINES@ \
 119          @INCINTL@ \
 120          @LARGEFILE_CPPFLAGS@ \
 121          -DLOCALEDIR="\"$(datadir)/locale\"" \
 122          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 123
 124 HFILES = \
 125         arsup.h binemul.h bucomm.h budbg.h \
 126         coffgrok.h debug.h demanguse.h dlltool.h dwarf.h elfcomm.h \
 127         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 128         windmc.h
 129
 130 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 131 BUILT_SOURCES = $(GENERATED_HFILES)
 132
 133 CFILES = \
 134         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 135         coffdump.c coffgrok.c cxxfilt.c \
 136         dwarf.c debug.c demanguse.c dlltool.c dllwrap.c \
 137         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 138         is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 139         nm.c not-ranlib.c not-strip.c \
 140         objcopy.c objdump.c prdbg.c \
 141         od-elf32_avr.c od-macho.c od-xcoff.c \
 142         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 143         resbin.c rescoff.c resrc.c resres.c \
 144         size.c srconv.c stabs.c strings.c sysdump.c \
 145         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 146         windres.c winduni.c wrstabs.c \
 147         windmc.c mclex.c
 148
 149 GENERATED_CFILES = \
 150         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 151         defparse.c deflex.c rcparse.c mcparse.c
 152
 153 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
 154 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 155
 156 # Extra object files for objdump
 157 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 158
 159 # Code shared by all the binutils.
 160 BULIBS = bucomm.c version.c filemode.c
 161
 162 # Code shared by the ELF related programs.
 163 ELFLIBS = elfcomm.c
 164
 165 BFDLIB = ../bfd/libbfd.la
 166
 167 OPCODES = ../opcodes/libopcodes.la
 168
 169 if ENABLE_LIBCTF
 170 LIBCTF = ../libctf/libctf.la
 171 LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
 172 else
 173 LIBCTF =
 174 LIBCTF_NOBFD =
 175 endif
 176
 177 LIBIBERTY = ../libiberty/libiberty.a
 178
 179 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 180 po/POTFILES.in: @MAINT@ Makefile
 181         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 182           && mv tmp $(srcdir)/po/POTFILES.in
 183
 184 EXPECT = expect
 185 RUNTEST = runtest
 186
 187 CC_FOR_TARGET = ` \
 188   if [ -f $$r/../gcc/xgcc ] ; then \
 189     if [ -f $$r/../newlib/Makefile ] ; then \
 190       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 191     else \
 192       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 193     fi; \
 194   else \
 195     if [ "@host@" = "@target@" ] ; then \
 196       echo $(CC); \
 197     else \
 198       echo gcc | sed '$(transform)'; \
 199     fi; \
 200   fi`
 201
 202 check-DEJAGNU: site.exp
 203         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 204         r=`pwd`; export r; \
 205         LC_ALL=C; export LC_ALL; \
 206         EXPECT=$(EXPECT); export EXPECT; \
 207         runtest=$(RUNTEST); \
 208         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 209           CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
 210           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 211                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 212                         $(RUNTESTFLAGS); \
 213         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 214         fi
 215
 216 development.exp: $(BFDDIR)/development.sh
 217         $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh  \
 218           | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
 219
 220 installcheck-local:
 221         /bin/sh $(srcdir)/sanity.sh $(bindir)
 222
 223 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 224 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 225 # non-empty until configure time.  Ugh!
 226 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 227 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
 228 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 229 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 230 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 231 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 232 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 233 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 234 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 235 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 236 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 237 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 238 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 239 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 240 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 241 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 242 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
 243 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 244 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 245 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 246 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 247
 248 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 249
 250 size_SOURCES = size.c $(BULIBS)
 251
 252 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 253
 254 strings_SOURCES = strings.c $(BULIBS)
 255
 256 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c demanguse.c $(ELFLIBS)
 257 readelf_LDADD   = $(LIBCTF_NOBFD) $(LIBINTL) $(LIBIBERTY) $(ZLIB) $(DEBUGINFOD_LIBS)
 258
 259 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 260 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 261
 262 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 263
 264 nm_new_SOURCES = nm.c demanguse.c $(BULIBS)
 265
 266 objdump_SOURCES = objdump.c dwarf.c prdbg.c demanguse.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 267 EXTRA_objdump_SOURCES = od-xcoff.c
 268 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(DEBUGINFOD_LIBS)
 269
 270 objdump.@OBJEXT@:objdump.c
 271 if am__fastdepCC
 272         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 273         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 274 else
 275 if AMDEP
 276         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 277         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 278 endif
 279         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 280 endif
 281
 282 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 283
 284 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 285         emul_$(EMULATION).c $(BULIBS)
 286 EXTRA_ar_SOURCES = $(CFILES)
 287 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 288
 289 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 290         binemul.c emul_$(EMULATION).c $(BULIBS)
 291 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 292
 293 addr2line_SOURCES = addr2line.c $(BULIBS)
 294
 295 # The following is commented out for the conversion to automake.
 296 # This rule creates a single binary that switches between ar and ranlib
 297 # by looking at argv[0].  Use this kludge to save some disk space.
 298 # However, you have to install things by hand.
 299 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 300 # Alternatively, you can install ranlib.sh as ranlib.
 301 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 302 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 303 #       -rm -f $(RANLIB_PROG)
 304 #       -ln $(AR_PROG) $(RANLIB_PROG)
 305 #
 306 # objcopy and strip in one binary that uses argv[0] to decide its action.
 307 #
 308 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 309 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 310 #       -rm -f $(STRIP_PROG)
 311 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 312
 313 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 314         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 315         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 316         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 317
 318 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 319         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 320
 321 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 322         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 323
 324 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 325         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 326
 327 sysinfo.@OBJEXT@: sysinfo.c
 328         if [ -r sysinfo.c ]; then \
 329           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 330         else \
 331           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 332         fi
 333
 334 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 335         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 336
 337 embedspu: embedspu.sh Makefile
 338         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 339         chmod a+x $@
 340
 341 # We need these for parallel make.
 342 sysinfo.h: sysinfo.c
 343
 344 # Disable -Werror, if it has been enabled, since old versions of bison/
 345 # yacc will produce working code which contain compile time warnings.
 346 arparse.@OBJEXT@: arparse.c
 347 if am__fastdepCC
 348         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 349         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 350 else
 351 if AMDEP
 352         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 353         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 354 endif
 355         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 356 endif
 357
 358 arlex.@OBJEXT@: arlex.c
 359 if am__fastdepCC
 360         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 361         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 362 else
 363 if AMDEP
 364         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 365         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 366 endif
 367         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 368 endif
 369
 370 dwarf.@OBJEXT@: dwarf.c
 371 if am__fastdepCC
 372         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
 373         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 374 else
 375 if AMDEP
 376         source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
 377         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 378 endif
 379         $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
 380 endif
 381
 382 sysroff.@OBJEXT@: sysroff.c
 383 if am__fastdepCC
 384         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 385         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 386 else
 387 if AMDEP
 388         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 389         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 390 endif
 391         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 392 endif
 393
 394 defparse.@OBJEXT@: defparse.c
 395 if am__fastdepCC
 396         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 397         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 398 else
 399 if AMDEP
 400         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 401         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 402 endif
 403         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 404 endif
 405
 406 deflex.@OBJEXT@: deflex.c
 407 if am__fastdepCC
 408         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 409         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 410 else
 411 if AMDEP
 412         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 413         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 414 endif
 415         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 416 endif
 417
 418 rcparse.@OBJEXT@: rcparse.c
 419 if am__fastdepCC
 420         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 421         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 422 else
 423 if AMDEP
 424         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 425         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 426 endif
 427         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 428 endif
 429
 430 mcparse.@OBJEXT@: mcparse.c
 431 if am__fastdepCC
 432         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 433         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 434 else
 435 if AMDEP
 436         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 437         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 438 endif
 439         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 440 endif
 441
 442 rclex.@OBJEXT@: rclex.c
 443 if am__fastdepCC
 444         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 445         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 446 else
 447 if AMDEP
 448         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 449         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 450 endif
 451         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 452 endif
 453
 454 mclex.@OBJEXT@: mclex.c
 455 if am__fastdepCC
 456         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 457         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 458 else
 459 if AMDEP
 460         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 461         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 462 endif
 463         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 464 endif
 465
 466 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 467 srconv.@OBJEXT@: sysroff.c
 468
 469 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 470 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 471
 472 dlltool.@OBJEXT@:
 473 if am__fastdepCC
 474         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 475         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 476 else
 477 if AMDEP
 478         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 479         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 480 endif
 481         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 482 endif
 483
 484 rescoff.@OBJEXT@:
 485 if am__fastdepCC
 486         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 487         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 488 else
 489 if AMDEP
 490         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 491         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 492 endif
 493         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 494 endif
 495
 496 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 497
 498 sysdump_SOURCES = sysdump.c $(BULIBS)
 499 sysdump.@OBJEXT@: sysroff.c
 500
 501 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 502         winduni.c resres.c $(BULIBS)
 503 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 504
 505 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 506         winduni.c $(BULIBS)
 507 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 508
 509 dllwrap_SOURCES = dllwrap.c version.c
 510 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 511
 512
 513 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
 514         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 515         mcparse.h mcparse.c embedspu.sh
 516
 517 diststuff: $(EXTRA_DIST) info
 518 all: info
 519
 520 # development.sh is used to determine -Werror default.
 521 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
 522
 523 EXTRA_DEJAGNU_SITE_CONFIG = development.exp
 524
 525 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
 526   site.bak embedspu
 527
 528 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 529   binutils.log binutils.sum abcdefgh*
 530 mostlyclean-local:
 531         -rm -rf tmpdir
 532
 533 .PHONY: install-exec-local
 534
 535 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 536         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 537           if test -f $$p$(EXEEXT); then \
 538             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 539             $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 540           else :; fi; \
 541         done
 542         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 543         for i in $(TOOL_PROGS); do \
 544           if [ -f $$i$(EXEEXT) ]; then \
 545             j=`echo $$i | sed -e 's/-new//'`; \
 546             k=`echo $$j | sed '$(transform)'`; \
 547             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 548               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 549               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 550                 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 551             fi; \
 552           else true; \
 553           fi; \
 554         done