configs/example/hmc_tgen.cfg

   1 # This format supports comments using the '#' symbol as the leading
   2 # character of the line
   3 #
   4 # The file format contains [STATE]+ [INIT] [TRANSITION]+ in any order,
   5 # where the states are the nodes in the graph, init describes what
   6 # state to start in, and transition describes the edges of the graph.
   7 #
   8 # STATE <id> <duration (ticks)> <type>
   9 #
  10 # State IDLE idles
  11 #
  12 # States LINEAR and RANDOM have additional:
  13 # STATE = [LINEAR, RANDOM]
  14 # <id>
  15 # <duration (ticks)>
  16 # <type>
  17 # <percent reads>
  18 # <start addr>
  19 # <end addr>
  20 # <access size (bytes)>
  21 # <min period (ticks)>
  22 # <max period (ticks)>
  23 # <data limit (bytes)>
  24 #
  25 # State TRACE plays back a pre-recorded trace once
  26 #
  27 # Addresses are expressed as decimal numbers, both in the
  28 # configuration and the trace file. The period in the linear and
  29 # random state is from a uniform random distribution over the
  30 # interval. If a specific value is desired, then the min and max can
  31 # be set to the same value.
  32 STATE 0 100 IDLE
  33 STATE 1 10000000 LINEAR 100 2147483648 2181038080 64 30000 30000 0
  34 INIT 0
  35 TRANSITION 0 1 1
  36 TRANSITION 1 0 1