1 ##############################################################################
3 ## This file is a shell script fragment that supplies the information
4 ## necessary to tailor a template configure script into the configure
5 ## script appropriate for this directory. For more information, check
6 ## any existing configure script.
8 ## Be warned, there are two types of configure.in files. There are those
9 ## used by Autoconf, which are macros which are expanded into a configure
10 ## script by autoconf. The other sort, of which this is one, is executed
11 ## by Cygnus configure.
13 ## For more information on these two systems, check out the documentation
14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
16 ##############################################################################
18 ### To add a new directory to the tree, first choose whether it is a target
19 ### or a host dependent tool. Then put it into the appropriate list
20 ### (library or tools, host or target), doing a dependency sort. For
21 ### example, gdb requires that byacc (or bison) be built first, so it is in
22 ### the ${host_tools} list after byacc and bison.
25 # these libraries are used by various programs built for the host environment
27 host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
29 if [ "${enable_gdbgui}" = "yes" ] ; then
30 host_libs="${host_libs} libgui"
33 # these tools are built for the host environment
35 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
36 prms send-pr gprof gdbtest tgas etc expect dejagnu sim
37 m4 autoconf ispell grep diff rcs cvs fileutils shellutils
38 textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
39 recode release sed utils guile perl"
42 # these libraries are built for the target environment, and are built after
43 # the host libraries and the host tools (which may be a cross compiler)
45 target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
48 # these tools are built using the target libs, and are intended to run only
49 # in the target environment
51 # note: any program that *uses* libraries that are in the "target_libs"
52 # list belongs in this list. those programs are also very likely
53 # candidates for the "native_only" list which follows
55 target_tools="target-examples target-groff"
57 ################################################################################
59 ## These two lists are of directories that are to be removed from the
60 ## ${configdirs} list for either cross-compilations or for native-
61 ## compilations. For example, it doesn't make that much sense to
62 ## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
63 ## a native environment.
65 # directories to be built in the native environment only
67 native_only="autoconf cvs emacs emacs19 fileutils find grep gzip hello
68 indent ispell m4 rcs recode sed shellutils tar textutils gash
69 uudecode wdiff gprof target-groff guile perl"
71 # directories to be built in a cross environment only
73 cross_only="target-libiberty target-libgloss target-newlib"
75 ## All tools belong in one of the four categories, and are assigned above
76 ## We assign ${configdirs} this way to remove all embedded newlines. This
77 ## is important because configure will choke if they ever get through.
78 ## ${configdirs} is directories we build using the host tools.
79 ## ${target_configdirs} is directories we build using the target tools.
81 configdirs=`echo ${host_libs} ${host_tools}`
82 target_configdirs=`echo ${target_libs} ${target_tools}`
84 ################################################################################
86 srctrigger=move-if-change
87 srcname="gnu development package"
89 # This gets set non-empty for some net releases of packages.
94 # Work in distributions that contain no compiler tools, like Autoconf.
95 if [ -d ${srcdir}/config ]; then
97 m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
98 m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
99 m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
100 m68k-*-linux*) host_makefile_frag=config/mh-linux ;;
101 m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
102 m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
103 m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
104 mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
105 mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
106 mips*-sgi-irix[56]*) host_makefile_frag=config/mh-irix5 ;;
107 mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
108 mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
109 mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
110 mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
111 i[345]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
112 i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
113 i[345]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
114 i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;;
115 i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
116 i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;;
117 i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
118 i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
119 i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
120 vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
121 *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
122 m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
123 *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
124 *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
125 *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
126 rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
127 *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
128 *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
129 *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
133 # If we aren't going to be using gcc, see if we can extract a definition
134 # of CC from the fragment.
135 if [ -z "${CC}" -a "${build}" = "${host}" ]; then
136 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
139 test -z "$dir" && dir=.
140 if test -f $dir/gcc; then
146 if [ -z "${found}" -a -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
147 xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
148 if [ -n "${xx}" ] ; then
154 # We default to --with-shared on platforms where -fpic is meaningless.
155 # Well, we don't yet, but we will.
156 if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
158 alpha-dec-osf*) enable_shared=yes ;;
159 mips-sgi-irix5*) enable_shared=yes ;;
160 *) enable_shared=no ;;
164 case "${enable_shared}" in
171 if [ x${shared} = xyes ]; then
174 hppa*) waugh=config/mh-papic ;;
175 i[345]86-*) waugh=config/mh-x86pic ;;
176 sparc64-*) waugh=config/mh-sparcpic ;;
177 *) waugh=config/mh-${host_cpu}pic ;;
179 if [ -f ${srcdir}/${waugh} ]; then
180 if [ -n "${host_makefile_frag}" ] ; then
181 cat ${srcdir}/${host_makefile_frag} > mh-frag
182 cat ${srcdir}/${waugh} >> mh-frag
183 host_makefile_frag=mh-frag
185 host_makefile_frag=${waugh}
193 v810*) target_makefile_frag=config/mt-v810 ;;
194 i[345]86-*-netware*) target_makefile_frag=config/mt-netware ;;
195 powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
203 # some tools are so dependent upon X11 that if we're not building with X,
204 # it's not even worth trying to configure, much less build, that tool.
207 yes | "") # the default value for this tree is that X11 is available
210 skipdirs="${skipdirs} tk gash"
213 echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
217 # Some tools are only suitable for building in a "native" situation.
218 # Those are added when we have a host==target configuration. For cross
219 # toolchains, we add some directories that should only be useful in a
224 if [ x"${host}" = x"${target}" ] ; then
225 # when doing a native toolchain, don't build the targets
226 # that are in the 'cross only' list
227 skipdirs="${skipdirs} ${cross_only}"
231 # similarly, don't build the targets in the 'native only'
232 # list when building a cross compiler
233 skipdirs="${skipdirs} ${native_only}"
234 is_cross_compiler=yes
235 target_subdir=${target_alias}
236 if [ ! -d ${target_subdir} ] ; then
237 if mkdir ${target_subdir} ; then true
239 echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
247 # Handle --with-headers=XXX. The contents of the named directory are
248 # copied to $(tooldir)/sys-include.
249 if [ x"${with_headers}" != x ]; then
250 if [ x${is_cross_compiler} = xno ]; then
251 echo 1>&2 '***' --with-headers is only supported when cross compiling
254 case "${exec_prefixoption}" in
256 *) x=${exec_prefix} ;;
258 copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
261 # Handle --with-libs=XXX. Multiple directories are permitted. The
262 # contents are copied to $(tooldir)/lib.
263 if [ x"${with_libs}" != x ]; then
264 if [ x${is_cross_compiler} = xno ]; then
265 echo 1>&2 '***' --with-libs is only supported when cross compiling
268 # Copy the libraries in reverse order, so that files in the first named
269 # library override files in subsequent libraries.
270 case "${exec_prefixoption}" in
272 *) x=${exec_prefix} ;;
274 for l in ${with_libs}; do
275 copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
279 # If both --with-headers and --with-libs are specified, default to
281 if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
282 if [ x"${with_newlib}" = x ]; then
287 # Recognize --with-newlib/--without-newlib.
288 if [ x${with_newlib} = xno ]; then
289 skipdirs="${skipdirs} target-newlib"
290 elif [ x${with_newlib} = xyes ]; then
291 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
294 # Default to using --with-stabs for certain targets.
295 if [ x${with_stabs} = x ]; then
297 mips*-*-* | alpha*-*-osf* | i[345]86*-*-sysv4* | i[345]86*-*-unixware*)
299 withoptions="${withoptions} --with-stabs"
304 # Handle ${copy_dirs}
305 set fnord ${copy_dirs}
307 while [ $# != 0 ]; do
308 if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
311 echo Copying $1 to $2
313 # Use the install script to create the directory and all required
314 # parent directories.
319 ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
322 # Copy the directory, assuming we have tar.
323 # FIXME: Should we use B in the second tar? Not all systems support it.
324 (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
326 # It is the responsibility of the user to correctly adjust all
327 # symlinks. If somebody can figure out how to handle them correctly
328 # here, feel free to add the code.
335 # Configure extra directories which are host specific
339 configdirs="$configdirs dosrel" ;;
342 # Remove more programs from consideration, based on the host or
343 # target this usually means that a port of the program doesn't
350 noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl"
353 noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl"
356 noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl"
359 noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl"
366 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty"
369 noconfigdirs="$noconfigdirs target-newlib"
372 noconfigdirs="$noconfigdirs target-libgloss"
375 # ld works, but does not support shared libraries. emacs doesn't
376 # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
377 # gas doesn't generate exception information.
378 noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib"
381 # newlib is not 64 bit ready
382 noconfigdirs="$noconfigdirs target-newlib"
391 noconfigdirs="$noconfigdirs ld"
395 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
399 # Do configure ld/binutils/gas for this case.
402 # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
403 # cc is gcc, and on any system a user should be able to link cc to
404 # whatever they want. FIXME, emacs emacs19).
406 "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
409 noconfigdirs="$noconfigdirs ld shellutils"
412 # but don't build gdb
413 noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
417 # make/glob's configure uses some AC_TRY_RUN type tests
418 target_configdirs="$target_configdirs target-winsup"
419 noconfigdirs="$noconfigdirs tcl tk expect make"
420 # always build newlib.
421 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
423 # Can't build gdb for cygwin32 if not native.
424 case "${host}:${build}" in
425 *-*-cygwin32 | *-*-cygwin32:*-*-cygwin32) ;; # keep gdb
426 *) noconfigdirs="$noconfigdirs gdb"
431 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
433 i[345]86-*-sco3.2v5*)
434 # The linker does not yet know about weak symbols in COFF,
435 # and is not configured to handle mixed ELF and COFF.
436 noconfigdirs="$noconfigdirs gprof ld"
439 noconfigdirs="$noconfigdirs gprof"
441 i[345]86-*-solaris2*)
442 # The linker does static linking correctly, but the Solaris C library
443 # has bugs such that some important functions won't work when statically
444 # linked. (See man pages for getpwuid, for example.)
445 noconfigdirs="$noconfigdirs ld"
448 # The SYSV4 C compiler doesn't handle Emacs correctly
450 "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
453 # but that's okay since emacs doesn't work anyway
454 noconfigdirs="$noconfigdirs emacs emacs19"
457 # copied from rs6000-*-* entry
458 noconfigdirs="$noconfigdirs gprof cvs"
460 powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
461 target_configdirs="$target_configdirs target-winsup"
462 noconfigdirs="$noconfigdirs gdb tcl tk make expect"
463 # always build newlib.
464 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
467 # The CVS server code doesn't work on the RS/6000
468 # Newlib makes problems for libg++ in crosses.
469 noconfigdirs="$noconfigdirs target-newlib gprof cvs"
472 noconfigdirs="$noconfigdirs gprof"
475 noconfigdirs="$noconfigdirs ld binutils gprof"
478 # The GNU linker does not support shared libraries.
479 # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
480 noconfigdirs="$noconfigdirs ld gprof emacs"
483 noconfigdirs="$noconfigdirs gprof"
486 noconfigdirs="$noconfigdirs gprof"
489 noconfigdirs="$noconfigdirs gprof"
492 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes"
496 i[345]86-*-vsta) ;; # don't add gprof back in
497 i[345]86-*-go32) ;; # don't add gprof back in
498 *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
502 if [ x${is_cross_compiler} != xno ] ; then
503 noconfigdirs="$noconfigdirs gdb gdbtest target-newlib"
509 noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes"
512 noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes"
515 noconfigdirs="$noconfigdirs target-newlib"
518 # Newlib makes problems for libg++ in crosses.
519 noconfigdirs="$noconfigdirs target-newlib"
523 # Macs want a resource compiler.
524 configdirs="$configdirs grez"
528 # targets that need a second pass
531 noconfigdirs="$noconfigdirs libgloss"
535 # If we are building a Canadian Cross, discard tools that can not be built
536 # using a cross compiler. FIXME: These tools should be fixed.
537 if [ "${build}" != "${host}" ]; then
538 noconfigdirs="$noconfigdirs expect dejagnu make texinfo diff"
541 # Make sure we don't let GNU ld be added if we didn't want it.
542 if [ x$with_gnu_ld = xno ]; then
544 noconfigdirs="$noconfigdirs ld"
547 # Make sure we don't let GNU as be added if we didn't want it.
548 if [ x$with_gnu_as = xno ]; then
550 noconfigdirs="$noconfigdirs gas"
553 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
554 # $target_configdirs.
555 # If we have the source for $noconfigdirs entries, add them to $notsupp.
558 for dir in . $skipdirs $noconfigdirs ; do
559 dirname=`echo $dir | sed -e s/target-//g`
560 if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
561 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
562 if [ -r $srcdir/$dirname/configure ] \
563 || [ -r $srcdir/$dirname/configure.in ]; then
564 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
567 notsupp="$notsupp $dir"
571 if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
572 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
573 if [ -r $srcdir/$dirname/configure ] \
574 || [ -r $srcdir/$dirname/configure.in ]; then
575 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
578 notsupp="$notsupp $dir"
584 # Sometimes the tools are distributed with libiberty but with no other
585 # libraries. In that case, we don't want to build target-libiberty.
586 if [ -n "${target_configdirs}" ]; then
588 for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
589 if [ "$i" != "libiberty" ]; then
590 if [ -r $srcdir/$i/configure ] || [ -r $srcdir/$i/configure.in ]; then
596 if [ -z "${others}" ]; then
601 # Deconfigure all subdirectories, in case we are changing the
602 # configuration from one where a subdirectory is supported to one where it
604 if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
605 for i in `echo ${configdirs} | sed -e s/target-//g` ; do
609 if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
610 for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
611 rm -f ${target_subdir}/$i/Makefile
615 # Produce a warning message for the subdirs we can't configure.
616 # This isn't especially interesting in the Cygnus tree, but in the individual
617 # FSF releases, it's important to let people know when their machine isn't
618 # supported by the one or two programs in a package.
620 if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
621 # If $appdirs is non-empty, at least one of those directories must still
622 # be configured, or we error out. (E.g., if the gas release supports a
623 # specified target in some subdirs but not the gas subdir, we shouldn't
624 # pretend that all is well.)
625 if [ -n "$appdirs" ]; then
626 for dir in $appdirs ; do
627 if [ -r $dir/Makefile.in ]; then
628 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
632 if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
638 if [ -n "$appdirs" ]; then
639 echo "*** This configuration is not supported by this package." 1>&2
643 # Okay, some application will build, or we don't care to check. Still
644 # notify of subdirs not getting built.
645 echo "*** This configuration is not supported in the following subdirectories:" 1>&2
646 echo " ${notsupp}" 1>&2
647 echo " (Any other directories should still work fine.)" 1>&2
650 # Set with_gnu_as and with_gnu_ld as appropriate.
652 # This is done by determining whether or not the appropriate directory
653 # is available, and by checking whether or not specific configurations
654 # have requested that this magic not happen.
656 # The command line options always override the explicit settings in
657 # configure.in, and the settings in configure.in override this magic.
659 # If the default for a toolchain is to use GNU as and ld, and you don't
660 # want to do that, then you should use the --without-gnu-as and
661 # --without-gnu-ld options for the configure script.
663 if [ x${use_gnu_as} = x ] ; then
664 if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
666 withoptions="$withoptions --with-gnu-as"
670 if [ x${use_gnu_ld} = x ] ; then
671 if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
673 withoptions="$withoptions --with-gnu-ld"
677 if [ x${shared} = xyes ]; then
679 hppa*) target_makefile_frag=config/mt-papic ;;
680 i[345]86-*) target_makefile_frag=config/mt-x86pic ;;
681 *) target_makefile_frag=config/mt-${target_cpu}pic ;;
687 # Make sure that the compiler is able to generate an executable. If it
688 # can't, we are probably in trouble. We don't care whether we can run the
689 # executable--we might be using a cross compiler--we only care whether it
690 # can be created. At this point the main configure script has set CC.
691 echo "int main () { return 0; }" > conftest.c
692 ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
693 if [ $? = 0 ] && [ -s conftest ]; then
696 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
697 echo 1>&2 "*** You must set the environment variable CC to a working compiler."
703 # The Solaris /usr/ucb/cc compiler does not appear to work.
706 CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
707 if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
709 [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
710 if [ -d /opt/cygnus/bin ] ; then
711 if [ "$could_use" = "" ] ; then
712 could_use="/opt/cygnus/bin"
714 could_use="$could_use or /opt/cygnus/bin"
717 if [ "$could_use" = "" ] ; then
718 echo "Warning: compilation may fail because you're using"
719 echo "/usr/ucb/cc. You should change your PATH or CC "
720 echo "variable and rerun configure."
722 echo "Warning: compilation may fail because you're using"
723 echo "/usr/ucb/cc, when you should use the C compiler from"
724 echo "$could_use. You should change your"
725 echo "PATH or CC variable and rerun configure."
731 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
732 # binutils tools will find libbfd.so.
733 if [ "${shared}" = "yes" ]; then
734 sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
735 Makefile > Makefile.tem
737 mv -f Makefile.tem Makefile
741 sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
742 Makefile > Makefile.tem
744 mv -f Makefile.tem Makefile
749 # Record target_configdirs and the configure arguments in Makefile.
750 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
751 targargs=`echo "${arguments}" | \
752 sed -e 's/--norecursion//' \
753 -e 's/--cache[a-z-]*=[^ ]*//' \
754 -e 's/--ho[a-z-]*=[^ ]*//' \
755 -e 's/--ta[a-z-]*=[^ ]*//'`
757 # Passing a --with-cross-host argument lets the target libraries know
758 # whether they are being built with a cross-compiler or being built
759 # native. However, it would be better to use other mechanisms to make the
760 # sorts of decisions they want to make on this basis. Please consider
761 # this option to be deprecated. FIXME.
762 if [ x${is_cross_compiler} = xyes ]; then
763 targargs="--with-cross-host=${host_alias} ${targargs}"
766 targargs="--host=${target_alias} ${targargs}"
767 sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
768 -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
769 -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
770 Makefile > Makefile.tem
772 mv -f Makefile.tem Makefile