1 2007-11-06 Paul Brook <paul@codesourcery.com>
3 * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6.
5 2007-11-06 Nick Clifton <nickc@redhat.com>
7 * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke
8 it to see if the optimizations should be applied.
9 * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call
10 frame optimization if linker relaxation is not enabled.
12 2007-11-05 Danny Smith <dannysmith@users.sourceforge.net>
14 * read.c (ALIGN_LIMIT): Rename to ...
15 (TC_ALIGN_LIMIT): Guard against prior definition.
16 * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
18 2007-11-01 Sterling Augustine <sterling@tensilica.com>
20 * config/tc-xtensa.c (xtensa_symbol_new_hook): New.
21 (xtensa_mark_difference_of_two_symbols): New.
22 (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
23 * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
24 (tc_symbol_new_hook): Define.
26 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
28 * config/tc-i386.c (md_assemble): Replace no_xsuf with
30 (match_template): Likewise.
32 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
34 * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
37 2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
39 * config/tc-i386.c (process_suffix): Check addrprefixop0 to
40 see if the address size override prefix changes the size of the
42 (check_byte_reg): Don't warn if byteokintel is set.
43 (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
45 (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
48 2007-10-31 Eric B. Weddington <eweddington@cso.atmel.com>
50 * config/tc-avr.c (mcu_types): Remove devices that were never produced:
51 attiny10, atmega83, atmega85, atmega603.
52 * doc/c-avr.texi: Likewise.
54 2007-10-30 Nick Clifton <nickc@redhat.com>
56 * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
57 sym_diff relocs should be generated.
58 (md_apply_fix): Skip R_MN10300_ALIGN relocs.
59 (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
60 (mn10300_handle_align): New function. Generate R_MN10300_ALIGN
61 relocs to record alignment requests.
62 * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
63 R_MN10300_ALIGN relocs.
64 (HANDLE_ALIGN): Define. Call mn10300_handle_align.
66 2007-10-30 Nick Clifton <nickc@redhat.com>
68 * doc/as.texinfo (Section): Replace "subsegment" with
71 2007-10-27 H.J. Lu <hongjiu.lu@intel.com>
74 * config/obj-elf.c (obj_elf_section): Handle optional
75 parameters for .pushsection.
77 * doc/as.texinfo: Document optional parameters for
80 2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
82 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
83 * configure: Regenerated.
85 2007-10-24 Alan Modra <amodra@bigpond.net.au>
87 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
89 * configure.in: Invoke AC_GNU_SOURCE.
90 * Makefile.in: Regenerate.
91 * config.in: Regenerate.
92 * configure: Regenerate.
94 2007-10-19 Nick Clifton <nickc@redhat.com>
96 * expr.c (expr): Test md_allow_local_subtract (if defined) before
97 allowing the evaluation of an expression involving two symbols
98 defined in the same section.
99 * doc/internals.texi (md_allow_local_subtract): Document the new
101 * config/tc-mn10300.h (md_allow_local_subtract): Define.
102 (RELAX_EXPANSION_POSSIBLE): Define.
103 (MAX_RELOC_EXPANSION): Define.
104 (TC_FRAG_TYPE): Define.
105 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
106 (tc_gen_reloc): Return an array of relocs. If necessary generate
107 two relocs to handle an expressions involving the difference of
109 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
110 when then fixup is not pc-relative.
111 (mn10300_allow_local_subtract): New function. Determine when it
112 is safe to compute the difference between two symbols at assemble
115 2007-10-19 Alan Modra <amodra@bigpond.net.au>
117 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
118 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
119 chars that can start a name.
121 2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
123 * config/tc-hppa.c (pa_ip): Fix comment typo.
126 2007-10-18 Nick Clifton <nickc@redhat.com>
129 * config/tc-arc.c (md_estimate_size_before_relax): Change error
131 (md_convert_frag): Just call abort.
132 * config/tc-i860.c (md_estimate_size_before_relax): Change error
134 * config/tc-i860.h (md_convert_frag): Just call abort.
135 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
137 (md_convert_frag): Just call abort.
138 * config/tc-m68k.c (m68k_ip): Do not attempt translation of
141 * config/tc-arm.c: Fix formatting and spelling errors.
143 * config/tc-xc16x.c: Fix formatting and internationalization.
144 * po/gas.pot: Regenerate.
146 2007-10-17 Nick Clifton <nickc@redhat.com>
149 * as.h (ieee_md_atof, vax_md_atof): New prototypes.
150 * read.c (s_float_space): Allow a zero length return from md_atof
151 if the error message has been set.
152 (float_cons): Likewise.
153 * config/atof-ieee.c (ieee_md_atof): New function. Performs the
154 md_atof() function in a generic way for IEEE using targets.
155 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
156 same error message as ieee_md_atof.
157 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
158 * tc-arc.c (md_atof): Use ieee_md_atof.
159 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
160 constant 2. Use a precision of 5 for the 'x' and 'p' types.
161 * tc-avr.c (md_atof): Use ieee_md_atof.
162 * tc-bfin.c (md_atof): Use ieee_md_atof.
163 * tc-cr16.c (md_atof): Use ieee_md_atof.
164 * tc-crx.c (md_atof): Use ieee_md_atof.
165 * tc-d10v.c (md_atof): Use ieee_md_atof.
166 * tc-d30v.c (md_atof): Use ieee_md_atof.
167 * tc-dlx.c (md_atof): Use ieee_md_atof.
168 * tc-fr30.c (md_atof): Use ieee_md_atof.
169 * tc-frv.c (md_atof): Use ieee_md_atof.
170 * tc-h8300.c (md_atof): Use ieee_md_atof.
171 * tc-hppa.c (md_atof): Use ieee_md_atof.
172 * tc-i370.c (md_atof): Use ieee_md_atof.
173 (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
174 * tc-i386.c (md_atof): Use ieee_md_atof.
175 * tc-i860.c (md_atof): Use ieee_md_atof.
176 * tc-i960.c (md_atof): Use ieee_md_atof.
177 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
178 * tc-ip2k.c (md_atof): Use ieee_md_atof.
179 * tc-iq2000.c (md_atof): Use ieee_md_atof.
180 * tc-m32c.c (md_atof): Use ieee_md_atof.
181 * tc-m32r.c (md_atof): Use ieee_md_atof.
182 * tc-m68hc11.c (md_atof): Use ieee_md_atof.
183 * tc-m68k.c (md_atof): Use ieee_md_atof.
184 * tc-maxq.c (md_atof): Use ieee_md_atof.
185 * tc-mcore.c (md_atof): Use ieee_md_atof.
186 * tc-mep.c (md_atof): Use ieee_md_atof.
187 * tc-mips.c (md_atof): Use ieee_md_atof.
188 * tc-mmix.c (md_atof): Use ieee_md_atof.
189 * tc-mn10200.c (md_atof): Use ieee_md_atof.
190 * tc-mn10300.c (md_atof): Use ieee_md_atof.
191 * tc-msp430.c (md_atof): Use ieee_md_atof.
192 * tc-mt.c (md_atof): Use ieee_md_atof.
193 * tc-ns32k.c (md_atof): Use ieee_md_atof.
194 * tc-openrisc.c (md_atof): Use ieee_md_atof.
195 * tc-or32.c (md_atof): Use ieee_md_atof.
196 * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
197 * tc-pj.c (md_atof): Use ieee_md_atof.
198 * tc-ppc.c (md_atof): Use ieee_md_atof.
199 * tc-s390.c (md_atof): Use ieee_md_atof.
200 * tc-score.c (md_atof): Use ieee_md_atof.
201 * tc-sh.c (md_atof): Use ieee_md_atof.
202 * tc-sparc.c (md_atof): Use ieee_md_atof.
203 * tc-spu.c (md_atof): Use ieee_md_atof.
204 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
205 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
206 * tc-tic54.c (md_atof): Use ieee_md_atof.
207 * tc-v850.c (md_atof): Use ieee_md_atof.
208 * tc-vax.c (md_atof): New function. Call vax_md_atof.
209 * tc-xc16x.c (md_atof): Use ieee_md_atof.
210 * tc-xstormy16.c (md_atof): Use ieee_md_atof.
211 * tc-xtensa.c (md_atof): Use ieee_md_atof.
212 * tc-z8k.c (md_atof): Use ieee_md_atof.
213 * doc/internals.texi: Update description of md_atof function.
214 * po/gas.pot: Regenerate.
216 2007-10-16 Bob Wilson <bob.wilson@acm.org>
218 * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
220 2007-10-16 Nick Clifton <nickc@redhat.com>
222 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
224 * doc/as.texinfo (.type): Document the types accepted by the
225 type pseudo op, including "common".
227 2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
229 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
230 according to major opcode number.
232 2007-10-15 Alan Modra <amodra@bigpond.net.au>
234 * read.c (do_s_func): Check asprintf return status.
235 * stabs.c (stabs_generate_asm_func): Likewise.
236 (stabs_generate_asm_endfunc): Likewise.
238 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
240 * config/tc-i386.c (process_operands): Simplify implicit xmm0
243 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
245 * config/tc-i386.c (process_operands): Check the firstxmm0
246 field in opcode_modifier for instruction with a implicit
247 xmm0 as the first operand.
249 2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
251 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
253 * doc/c-avr.texi: Document new devices.
255 2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
257 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
258 instruction range information.
260 2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
262 * doc/as.texinfo (Object Attributes): New chapter.
263 (Pseudo Ops): Document .gnu_attribute.
264 (LNS directives): Correct .loc_mark_labels documentation.
266 2007-10-11 Nick Clifton <nickc@redhat.com>
268 * config/obj-elf.c (obj_elf_section): When pushing a section, if
269 there is a comma then the following argument must be a subsection
272 2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
274 * doc/c-i386.texi: Update which instruction's operands are
277 2007-10-11 Nick Clifton <nickc@redhat.com>
280 * config/tc-ia64.c: Allow for translations of error and warning
282 * po/gas.pot: Regenerate.
285 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
287 * po/gas.pot: Regenerate.
290 * config/tc-msp430.c: Fix spelling typos.
292 2007-10-11 Nick Clifton <nickc@redhat.com>
294 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
296 2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
298 * config/tc-mips.c (AT): Rename to...
300 (AT): New definition.
301 (mips_set_options): Rename "noat" to "at"; change the type.
302 (mips_opts): Update accordingly.
303 (append_insn): Likewise.
304 (macro_build_ldst_constoffset): Likewise.
305 (load_address): Likewise.
306 (macro, macro2): Likewise.
307 (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
310 2007-10-08 Nick Clifton <nickc@redhat.com>
312 * doc/as.texinfo (Previous): Clarify explanation of the behaviour
313 of this pseudo-op and add a couple of examples.
315 2007-10-08 Nick Clifton <nickc@redhat.com>
317 PR gas/5121 gas/5122 gas/5123
318 * Makefile.am (CFILES): Add cgen.c
319 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
320 tc-tic4x.c and xtensa-relax.c.
321 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
322 tc-tic4x.h and xtensa-relax.h.
323 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
324 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
325 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
326 (CONFIG_ATOF_CFILES): New variable.
327 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
328 dependency upon TARG_ENV_HFILES.
329 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
330 cgen-desc.h when foo-desc.h does not exit.
332 * Makefile.in: Regenerate.
333 * doc/Makefile.in: Regenerate.
334 * po/POTFILES.in: Regenerate.
336 * po/es.po: Regenerate.
337 * po/fr.po: Regenerate.
338 * po/gas.pot: Regenerate.
339 * po/rw.po: Regenerate.
340 * po/tr.po: Regenerate.
341 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
344 * config/obj-som.c: Likewise.
346 * config/tc-arc.c: Likewise.
348 * config/tc-arm.c: Likewise.
350 * config/tc-bfin.c: Likewise.
352 * config/tc-frv.c: Likewise.
354 * config/tc-dlx.c: Likewise.
356 2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
358 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
359 ATtiny48, AT90PWM216, AT90PWM316.
360 * doc/c-avr.texi: Document new devices.
362 2007-10-08 Nick Clifton <nickc@redhat.com>
365 * config/tc-arm.c (md_apply_fix): Correct error message.
367 * config/tc-arm.c (md_apply_fix): Likewise.
369 * config/tc-bfin.c (md_apply_fix): Fix error message.
371 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
373 2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
375 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
376 immediate operands directly for instructions with 4 operands.
378 2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
381 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
382 is ignored in Intel mode.
384 2007-10-04 Helge Deller <deller@gmx.de>
386 * read.c (potable): Add string8, string16, string32 and string64.
387 Add bit size for stringer function.
388 (stringer_append_char): New.
389 (stringer): Use stringer_append_char().
390 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
391 * config/obj-elf.c (obj_elf_ident): Likewise.
392 * config/tc-alpha.c (s_alpha_stringer): Likewise.
393 * config/tc-dlx.c (dlx_pseudo_table): Likewise.
394 * config/tc-hppa.c (pa_stringer): Likewise.
395 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
396 * config/tc-m68hc11.c (md_pseudo_table): Likewise.
397 * config/tc-mcore.c (md_pseudo_table): Likewise.
398 * config/tc-mips.c (mips_pseudo_table): Likewise.
399 * config/tc-spu.c (md_pseudo_table): Likewise.
400 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
401 * doc/as.texinfo (ABORT): Fix identing.
402 (String): Document new string8, string16, string32, string64
404 * NEWS: Mention the new feature.
406 2007-10-03 Nick Clifton <nickc@redhat.com>
409 * config/tc-avr.c (avr_get_constant): Extend error message to
410 mention that the constant must be positive.
412 2007-10-03 Nick Clifton <nickc@redhat.com>
414 * config/tc-avr.c (avr_get_constant):
416 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
418 (md_assemble): Fix spelling typo.
420 2007-10-03 Alan Modra <amodra@bigpond.net.au>
423 * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
425 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
427 * config/tc-cr16.c: Replaced 'tabs' with white spaces and
428 added R_CR16_DISP8 as default reloc type for b<cc> instructions.
430 2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
433 * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
434 (check_qword_reg): Also handle cvttsd2si.
436 2007-09-27 Kazu Hirata <kazu@codesourcery.com>
438 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
439 (last_movec_reg): Change to MBO.
440 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
441 (m68k_ip): Use MBO instead of MBO.
442 (init_table): Use MBO instead of MBO. Add an entry for mbo.
444 2007-09-26 Jan Beulich <jbeulich@novell.com>
446 * config/tc-i386.c (build_modrm_byte): Also check for RegEip
447 when considering IP-relative addressing.
449 2007-09-26 Jan Beulich <jbeulich@novell.com>
451 * config/tc-i386.h (md_register_arithmetic): Define.
452 * config/tc-ia64.h (md_register_arithmetic): Likewise.
453 * doc/internals.texi: Document md_register_arithmetic.
454 * expr.c (make_expr_symbol): Force O_register expressions into
456 (expr): Provide default for md_register_arithmetic. Don't resolve
457 adding/subtracting constants to/from registers if
458 md_register_arithmetic is zero.
460 2007-09-26 Jan Beulich <jbeulich@novell.com>
462 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
463 (cfi_finish): Add second empty instance.
465 2007-09-26 Jan Beulich <jbeulich@novell.com>
467 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
468 with simple call to parse_operand.
470 2007-09-26 Jan Beulich <jbeulich@novell.com>
472 * config/tc-i386.c (NUM_FLAG_CODE): Remove.
474 2007-09-26 Jan Beulich <jbeulich@novell.com>
476 * as.c (itbl_parse): Remove #define.
477 (struct itbl_file_list): Move down and ...
478 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
479 (show_usage): Conditionalize printing of --itbl option upon
481 (parse_args): Conditionalize handling of -t/--itbl options upon
482 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
485 2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
487 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
490 2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
492 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
493 (BRANCHBWPL, FRAG_VAR_SIZE): New.
494 (md_relax_table): Add BRANCHBWPL entries.
495 (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
496 (md_assemble): Use FRAG_VAR_SIZE.
497 (md_convert_frag_1): Add BRANCHBWPL cases.
498 (md_estimate_size_before_relaz): Likewise.
500 2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
502 * config/tc-mips.c (s_align): Set max_alignment to 28.
504 2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
507 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
508 (set_allow_index_reg): New.
509 (allow_index_reg): Likewise.
510 (md_pseudo_table): Add "allow_index_reg" and
511 "disallow_index_reg".
512 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
513 fake index registers.
514 (i386_scale): Updated.
515 (i386_index_check): Support fake index registers.
516 (parse_real_register): Return NULL on eiz/riz if fake index
517 registers aren't allowed.
519 2007-09-19 Nick Clifton <nickc@redhat.com>
521 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
524 2007-09-19 Bob Wilson <bob.wilson@acm.org>
526 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
528 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
530 * config/bfin-parse.y (asm_1): Slightly improve error messages
533 2007-09-18 Alan Modra <amodra@bigpond.net.au>
536 * read.c (emit_expr): Only use long long if required and available.
538 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
540 * config/tc-i386.c (baseindex): Removed.
541 (build_modrm_byte): Check reg_num for RIP register instead of
543 (i386_index_check): Likewise.
545 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
548 * config/obj-coff.c (obj_coff_endef): Remove checking size of
549 def_symbol_in_progress.
551 2007-09-17 Evandro Menezes <evandro@yahoo.com>
554 * read.c (emit_expr): Use unsigned long long values in warning
555 message about truncated expressions.
557 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
559 * config/tc-i386.c (intel_e04): Revert the last change.
561 2007-09-17 Nick Clifton <nickc@redhat.com>
563 * po/es.po: Updated Spanish translation.
565 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
568 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
571 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
573 * config/tc-i386.c (build_modrm_byte): Adjust comment line
576 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
578 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
581 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
583 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
585 2007-09-14 Michael Meissner <michael.meissner@amd.com>
586 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
587 Tony Linthicum <tony.linthicum@amd.com>
589 * NEWS: Add SSE5 support to NEWS file.
591 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
592 and build_modrm_byte to communicate.
593 (DREX_OC0): New SSE5 macro.
594 (DREX_OC0_MASK): Ditto.
596 (DREX_OC1_MASK): Ditto.
597 (DREX_XMEM_X1_X2_X2): Ditto.
598 (DREX_X1_XMEM_X2_X2): Ditto.
599 (DREX_X1_XMEM_X2_X1: Ditto.
600 (DREX_X1_X2_XMEM_X1: Ditto.
601 (DREX_XMEM_X1_X2): Ditto.
602 (DREX_X1_XMEM_X2): Ditto.
603 (drex_byte): New structure to describe the DREX byte.
605 * config/tc-i386.c (process_drex): New function to handle SSE5
607 (build_modrm_byte): Use the information cached away in
608 process_drex in the case of DREX instructions.
609 (i386_insn): Add drex field.
610 (pi): Add debugging of drex field.
611 (md_assemble): Treat SSE5 like SSE3 in instructions with an
612 immediate byte. Move REX field to DREX if this is a DREX
614 (process_operands): Add SSE5 support.
615 (build_modrm_byte): Ditto.
616 (output_insn): Ditto.
618 (i386_align_code): Ditto.
620 2007-09-12 Jan Beulich <jbeulich@novell.com>
622 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
623 after generic operand swapping, and swap only the immediate operands.
625 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
627 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
628 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
630 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
632 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
635 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
637 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
638 (cpu_flags_check_cpu64): This. Inline.
639 (uints_all_zero): New.
640 (uints_set): Likewise
641 (uints_equal): Likewise
642 (UINTS_ALL_ZERO): Likewise
643 (UINTS_SET): Likewise
644 (UINTS_CLEAR): Likewise
645 (UINTS_EQUAL): Likewise
646 (cpu_flags_and): Likewise.
647 (cpu_flags_or): Likewise.
648 (operand_type_and): Likewise.
649 (operand_type_or): Likewise.
650 (operand_type_xor): Likewise.
651 (cpu_flags_not): Inline and use switch instead of loop.
652 (cpu_flags_match): Updated.
653 (operand_type_match): Likewise.
654 (smallest_imm_type): Likewise.
655 (set_cpu_arch): Likewise.
657 (md_assemble): Likewise.
658 (parse_insn): Likewise.
659 (optimize_imm): Likewise.
660 (match_template): Likewise.
661 (process_suffix): Likewise.
662 (update_imm): Likewise.
663 (finalize_imm): Likewise.
664 (process_operands): Likewise.
665 (build_modrm_byte): Likewise.
666 (i386_immediate): Likewise.
667 (i386_displacement): Likewise.
668 (i386_index_check): Likewise.
669 (i386_operand): Likewise.
670 (i386_target_format): Likewise.
671 (intel_e11): Likewise.
672 (operand_type): Remove implicitregister.
673 (operand_type_check): Updated. Inline.
674 (cpu_flags_all_zero): Removed.
675 (operand_type_all_zero): Likewise.
676 (i386_array_biop): Likewise.
677 (cpu_flags_biop): Likewise.
678 (operand_type_biop): Likewise.
680 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
682 * Makefile.am: Run "make dep-am".
683 * Makefile.in: Regenerate.
685 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
687 * configure.in (AC_CHECK_HEADERS): Add limits.h.
688 * configure: Regenerated.
689 * config.in: Likewise.
691 * config/tc-i386.c: Include "opcodes/i386-init.h".
692 (_i386_insn): Use i386_operand_type for types.
693 (cpu_arch_flags): Updated to new types with bitfield.
694 (cpu_arch_tune_flags): Likewise.
695 (cpu_arch_isa_flags): Likewise.
696 (cpu_arch): Likewise.
697 (i386_align_code): Likewise.
698 (set_code_flag): Likewise.
699 (set_16bit_gcc_code_flag): Likewise.
700 (set_cpu_arch): Likewise.
701 (md_assemble): Likewise.
702 (parse_insn): Likewise.
703 (process_operands): Likewise.
704 (output_branch): Likewise.
705 (output_jump): Likewise.
706 (parse_real_register): Likewise.
707 (mode_from_disp_size): Likewise.
708 (smallest_imm_type): Likewise.
710 (type_names): Likewise.
713 (swap_2_operands): Likewise.
714 (optimize_imm): Likewise.
715 (optimize_disp): Likewise.
716 (match_template): Likewise.
717 (check_string): Likewise.
718 (process_suffix): Likewise.
719 (check_byte_reg): Likewise.
720 (check_long_reg): Likewise.
721 (check_qword_reg): Likewise.
722 (check_word_reg): Likewise.
723 (finalize_imm): Likewise.
724 (build_modrm_byte): Likewise.
725 (output_insn): Likewise.
726 (disp_size): Likewise.
727 (imm_size): Likewise.
728 (output_disp): Likewise.
729 (output_imm): Likewise.
731 (i386_immediate): Likewise.
732 (i386_displacement): Likewise.
733 (i386_index_check): Likewise.
734 (i386_operand): Likewise.
735 (parse_real_register): Likewise.
736 (i386_intel_operand): Likewise.
737 (intel_e09): Likewise.
738 (intel_bracket_expr): Likewise.
739 (intel_e11): Likewise.
740 (cpu_arch_flags_not): New.
741 (cpu_flags_check_x64): Likewise.
742 (cpu_flags_all_zero): Likewise.
743 (cpu_flags_not): Likewise.
744 (i386_cpu_flags_biop): Likewise.
745 (cpu_flags_biop): Likewise.
746 (cpu_flags_match); Likewise.
750 (reg16_inoutportreg): Likewise.
754 (disp16_32): Likewise.
756 (baseindex): Likewise.
764 (imm16_32): Likewise.
765 (imm16_32s): Likewise.
766 (imm16_32_32s): Likewise.
767 (operand_type): Likewise.
768 (operand_type_check): Likewise.
769 (operand_type_match): Likewise.
770 (operand_type_register_match): Likewise.
771 (update_imm): Likewise.
772 (set_code_flag): Also update cpu_arch_flags_not.
773 (set_16bit_gcc_code_flag): Likewise.
774 (md_begin): Likewise.
775 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
776 Use cpu_flags_match to match instructions.
777 (i386_target_format): Update cpu_arch_isa_flags and
778 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
779 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
780 (match_template): Don't initialize overlap0, overlap1,
781 overlap2, overlap3 and operand_types.
782 (process_suffix): Handle crc32 with 64bit register.
784 (CONSISTENT_REGISTER_MATCH): Likewise.
786 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
789 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
791 * config/tc-i386.c (match_template): Handle invlpga, vmload,
792 vmrun and vmsave in SVME.
793 (process_suffix): Likewise.
795 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
797 * config/tc-i386.c (i386_index_check): Don't use RegRex
798 on the reg_type field.
799 (parse_real_register): Use `||' instead of `|'.
801 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
803 * config/tc-i386.c (process_operands): Remove segment override
804 check on SVME instructions.
805 (i386_index_check): Remove memory operand check on SVME
808 2007-09-04 Alan Modra <amodra@bigpond.net.au>
810 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
811 (md_assemble): Update init of insn. Use insn.reloc instead of
812 calculating from flag.
813 (get_imm): Set reloc rather than flag.
814 (calcop): Formatting.
816 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
818 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
820 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
822 * doc/c-arc.texi: Fix typo.
824 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
826 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
829 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
831 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
832 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
834 (m68k_cpus): Adjust 5407 entry.
836 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
838 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
839 (m68k_cpus): Define 51QE cpu.
841 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
842 Joseph Myers <joseph@codesourcery.com>
844 * as.c (main): Flush stderr before printing listings to ensure
845 consistent output order across platforms.
847 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
849 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
851 2007-08-24 Joseph Myers <joseph@codesourcery.com>
852 Paul Brook <paul@codesourcery.com>
855 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
856 * as.c (show_usage): Document --debug-prefix-map option.
857 (parse_args): Handle --debug-prefix-map.
858 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
859 * stabs.c (stabs_generate_asm_file): Remap debug paths.
860 * Makefile.am (GAS_CFILES): Add remap.c
861 (GENERIC_OBJS): Add remap.o.
862 Regenerate dependencies.
863 * Makefile.in: Regenerate.
864 * doc/as.texinfo (--debug-prefix-map): Document.
866 2007-08-24 Aurelien Jarno <aurel32@debian.org>
868 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
869 before printing them.
871 2007-08-24 Anders Waldenborg <anders@0x63.nu>
872 Alan Modra <amodra@bigpond.net.au>
874 * config/tc-i386.c (lex_got): Don't scan past a comma.
876 2007-08-23 Ben Elliston <bje@au.ibm.com>
878 * config/tc-ppc.c (parse_cpu): Handle "750cl".
879 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
880 (md_show_usage): Document -m750cl.
881 (md_assemble): Handle two delimiters in succession (eg. `),').
882 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
883 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
884 * testsuite/gas/ppc/ppc750ps.s: New file.
885 * testsuite/gas/ppc/ppc750ps.d: Likewise.
887 2007-08-23 Ben Elliston <bje@au.ibm.com>
889 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
891 2007-08-17 Alan Modra <amodra@bigpond.net.au>
894 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
896 (i386_immediate): Detect and complain about more cases of
897 invalid immediate expressions. Return failure rather than
898 converting them to zero.
899 (i386_displacement): Likewise.
901 2007-08-17 Alan Modra <amodra@bigpond.net.au>
903 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
905 2007-08-14 Andreas Schwab <schwab@suse.de>
907 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
910 2007-08-12 Matthias Klose <doko@ubuntu.com>
912 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
913 $(top_srcdir)/../../bfd/doc.
914 * doc/Makefile.in: Regenerate.
916 2007-08-10 Nick Clifton <nickc@redhat.com>
918 * NEWS: Add a marker for the 2.18 features.
920 2007-08-09 Paul Brook <paul@codesourcery.com>
922 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
924 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
926 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
928 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
930 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
931 DWORD memory to Reg64 in Intel synax.
932 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
933 Reg32 in Intel syntax.
935 2007-07-25 Sterling Augustine <sterling@tensilica.com>
937 * config/tc-xtensa.c (xtensa_extui_opcode): New.
938 (xg_expand_assembly_insn): Check for invalid extui operands.
939 (md_begin): Initialize xtensa_extui_opcode.
941 2007-07-24 Nick Clifton <nickc@redhat.com>
943 * config/tc-mep.h (skip_whitespace): Remove definition.
945 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
947 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
950 (f32_patt): Remove f32_15.
951 (f16_patt): Likewise.
952 (i386_align_code): Updated to alt_long_patt for 64bit by
955 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
957 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
959 * config/tc-i386.c (i386_align_code): Enable alignment up to
960 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
963 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
965 2007-07-20 Nick Clifton <nickc@redhat.com>
967 * app.c (do_scrub_chars): Provide a one character buffer to hold a
968 pushed back newline at the end of an unterminated quoted string.
970 2007-07-14 Nick Clifton <nickc@redhat.com>
972 * config/tc-arm.c (create_register_alias): Return a boolean rather
974 Check the return value of insert_reg_alias and do not continue to
975 create aliases once an insertion has failed.
976 (s_unreq): Delete the all-upper-case and all-lower-case
977 alternatives as well.
979 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
981 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
984 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
986 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
989 2007-07-04 Richard Sandiford <richard@codesourcery.com>
991 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
992 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
993 Deprecate *x and *fx.
994 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
997 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
999 * config/obj-coff.h (x86_64_target_format): Renamed to ...
1000 (i386_target_format): This
1001 (TARGET_FORMAT): Use i386_target_format.
1003 * config/tc-i386.c (x86_64_target_format): Removed.
1004 (i386_target_format): Handle PE formats.
1006 2007-07-04 Nick Clifton <nickc@redhat.com>
1008 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
1009 to get the right length of printed value.
1011 2007-07-03 Nick Clifton <nickc@redhat.com>
1013 * COPYING: Replace with GPLv3 text.
1014 * app.c: Update copyright notice to refer to GPLv3.
1015 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
1016 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
1017 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
1018 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
1019 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
1020 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
1021 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
1022 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
1023 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
1024 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
1025 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
1026 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
1027 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
1028 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
1029 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
1030 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
1031 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
1032 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
1033 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
1034 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
1035 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
1036 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
1037 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
1038 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
1039 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
1040 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
1041 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
1042 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
1043 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
1044 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
1045 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
1046 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
1047 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
1048 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
1049 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
1050 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
1051 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
1052 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
1053 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
1054 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
1055 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
1056 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
1057 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
1058 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
1059 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
1060 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
1061 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
1062 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
1063 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
1064 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
1065 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
1066 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
1067 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
1068 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
1069 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
1070 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
1071 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
1072 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
1073 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
1074 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
1076 * flonum-mult.c: Likewise, and also correct typo referring to
1077 non-existant GNU Assembler General Public License.
1078 * config/tc-m68851.h: Likewise.
1079 * NEWS: Mention the new license. Also note where the 2.17 release
1081 * config/e-crisaout.c: Add copyright header.
1082 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
1083 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
1084 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
1085 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
1086 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
1087 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
1088 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
1089 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
1090 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
1091 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
1092 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
1093 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
1094 config/te-wince-pe.h: Likewise.
1096 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
1098 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
1099 (install_operand): Add E encoding.
1100 (md_begin): Check and skip initial '.' arg character.
1101 (get_num): Add 0..511 case.
1103 2007-07-03 Alan Modra <amodra@bigpond.net.au>
1106 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
1107 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
1109 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
1112 * app.c (do_scrub_chars <state 5>): Check for output buffer full
1115 2007-07-02 Joseph Myers <joseph@codesourcery.com>
1117 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
1118 s_dtprel_internal): New.
1119 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
1120 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
1121 BFD_RELOC_MIPS_TLS_DTPREL64.
1123 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1125 * Makefile.am: Run "make dep-am".
1126 * Makefile.in: Regenerate.
1127 * aclocal.m4: Regenerate.
1128 * config.in: Regenerate.
1129 * doc/Makefile.in: Regenerate.
1130 * po/POTFILES.in: Regenerate.
1131 * po/gas.pot: Regenerate.
1133 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1135 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
1136 coff section flag values to bfd section flag.
1138 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
1140 * aclocal.m4: Regenerated.
1141 * doc/Makefile.in: Likewise.
1142 * Makefile.in: Likewise.
1144 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1146 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
1148 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1150 * as.c (create_obj_attrs_section): New.
1151 (main): Call create_obj_attrs_section for ELF.
1152 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
1153 skip_past_comma, s_vendor_attribute): New.
1154 (potable): Add gnu_attribute for ELF.
1155 * read.h (s_vendor_attribute): Declare.
1156 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
1157 round s_vendor_attribute.
1158 (aeabi_set_public_attributes): Update for new attributes
1160 (arm_md_end): Remove attributes contents setting now done
1163 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
1165 * Makefile.am: Add CR16 related entry.
1166 * Makefile.in: Regenerate.
1167 * config/tc-cr16.h: New file
1168 * config/tc-cr16.c: New file
1169 * doc/c-cr16.texi: New file for cr16
1170 * doc/all.texi: Entry for cr16
1171 * doc/Makefile.am: Added c-cr16.texi
1172 * doc/Makefile.in: Regenerate
1173 * doc/as.texinfo: Entry for CR16 target
1174 * NEWS: Announce the support for the new target.
1176 2007-06-26 Paul Brook <paul@codesourcery.com>
1178 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
1180 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
1182 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
1184 * config/tc-i386.c (process_operands): Replace regKludge
1187 2007-06-25 Richard Sandiford <richard@codesourcery.com>
1189 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
1190 * config/tc-mips.c (append_insn): Record which symbols have
1191 R_MIPS16_26 relocations against them.
1192 (mips_fix_adjustable): Don't reduce relocations against such symbols.
1194 2007-06-22 Sterling Augustine <sterling@tensilica.com>
1196 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
1197 (frag_format_size): Handle RELAX_IMMED_STEP3.
1198 (xtensa_relax_frag, md_convert_frag): Likewise.
1199 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
1200 (RELAX_IMMED_MAXSTEPS): Adjust.
1201 * config/xtensa-relax.c (widen_spec_list): Add transitions from
1202 wide branches to branch-over-jumps.
1203 (build_transition): Handle wide branches in transition patterns.
1205 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
1207 * config/tc-i386.c (disp_size): New.
1208 (imm_size): Likewise.
1209 (output_disp): Use disp_size and imm_size.
1210 (output_imm): Use imm_size.
1212 2007-06-19 Sterling Augustine <sterling@tensilica.com>
1214 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1215 use of literal_frag field.
1216 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1217 in the literal_frag field.
1218 (xtensa_move_literals): Use it here instead of searching. Update
1219 literal_frag field with new value.
1221 2007-06-14 Paul Brook <paul@codesourcery.com>
1223 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1224 narrow shift by immediate.
1226 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
1228 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1230 * acinclude.m4: Don't include m4 files.
1231 (BFD_BINARY_FOPEN): Removed.
1232 Remove libtool kludge.
1234 * Makefile.in: Regenerated.
1235 * doc/Makefile.in: Likewise.
1236 * aclocal.m4: Likewise.
1237 * configure: Likewise.
1239 2007-06-11 Sterling Augustine <sterling@tensilica.com>
1240 Bob Wilson <bob.wilson@acm.org>
1242 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1243 (XTENSA_PROP_NO_TRANSFORM): ...this.
1244 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1245 (xtensa_mark_frags_for_org): New.
1246 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1247 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1248 (get_frag_property_flags): Adjust reference to is_no_transform flag.
1249 (xtensa_frag_flags_combinable): Likewise.
1250 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
1251 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1253 2007-06-06 Paul Brook <paul@codesourcery.com>
1255 * config/tc-arm.c (s_align): Pad code sections appropriately.
1257 2007-06-05 Paul Brook <paul@codesourcery.com>
1259 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1261 2007-06-05 Nick Clifton <nickc@redhat.com>
1264 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1266 2007-06-05 Alan Modra <amodra@bigpond.net.au>
1268 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
1270 (tc_gen_reloc): Abort if neither addsy or subsy is set.
1271 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1272 * config/tc-spu.h (md_operand): Handle @ppu without sym.
1274 2007-05-31 Paul Brook <paul@codesourcery.com>
1276 * config/tc-arm.c (insns): Allow strex on M profile cores.
1278 2007-05-29 David S. Miller <davem@davemloft.net>
1279 Jakub Jelinek <jakub@redhat.com>
1282 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1283 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1285 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1287 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
1289 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1291 * config/tc-ppc.c: Convert to ISO C.
1292 * config/tc-ppc.c: Likewise.
1294 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1296 * write.h (EXEC_MACHINE_TYPE): Delete.
1297 (string_byte_count, section_alignment): Delete.
1299 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
1301 * app.c (do_scrub_chars): Cope with \ at end of buffer.
1303 2007-05-26 Alan Modra <amodra@bigpond.net.au>
1305 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1306 top 32 bits of 64 bit value if so doing results in passing
1307 range check. Rewrite sign extension fudges similarly. Enable
1308 fudges for powerpc64 too. Report user value if range check
1309 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
1310 range rather than value, also to report user value on failure.
1312 2007-03-25 Paul Brook <paul@codesourcery.com>
1314 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1315 (do_t_add_sub): Correctly encode subs pc, lr, #const.
1316 (do_t_mov_cmp): Correctly encode movs pc, lr.
1318 2007-05-24 Steve Ellcey <sje@cup.hp.com>
1320 * Makefile.in: Regnerate.
1321 * configure: Regenerate.
1322 * aclocal.m4: Regenerate.
1323 * doc/Makefile.in: Regenerate.
1325 2007-05-22 Bob Wilson <bob.wilson@acm.org>
1327 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1328 and index entries about automatic alignment of ENTRY instructions.
1330 2007-05-22 Nick Clifton <nickc@redhat.com>
1332 * doc/as.texinfo: Use @copying around the copyright notice.
1334 2007-05-18 Joseph Myers <joseph@codesourcery.com>
1336 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1339 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
1342 2003-06-05 Michal Ludvig <mludvig@suse.cz>
1343 * doc/as.texinfo: Document new directives: .cfi_restore,
1344 .cfi_undefined, .cfi_same_value, .cfi_return_column,
1345 .cfi_remember_state and .cfi_restore_state.
1347 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
1349 * config/tc-m68k.c (md_apply_fix): Show value of out of range
1350 fixups in error message.
1351 (md_conver_frag_1): Propagate the fix source location and use
1352 as_bad_where rather than fatal, for better error messages.
1354 2007-05-16 Paul Brook <paul@codesourcery.com>
1356 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1358 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
1360 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1362 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
1365 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1366 addend is stored for relocs against weak symbols.
1367 (md_apply_fix): So not loose track of addend for relocs against
1370 2007-05-14 Thiemo Seufer <ths@mips.com>
1372 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1374 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
1376 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1377 addri, addri.c, subi, and subi.c when immediate number is hex.
1378 (score_insns): Remove subis and subis.c.
1379 (do_sub_rdi16): Delete.
1381 2007-05-11 Alan Modra <amodra@bigpond.net.au>
1383 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
1385 (md_assemble): Tidy use of insn.flag.
1386 (get_imm): Likewise. Handle uppercase input too.
1387 (spu_cons): New function.
1388 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1389 (TC_FORCE_RELOCATION): Don't resolve them either.
1391 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
1393 * config/tc-arm.c (md_apply_fix): Generate more accurate
1394 diagnostic when 8-bit immediate range is exceeded for
1395 BFD_RELOC_ARM_OFFSET_IMM8.
1397 2007-05-04 Alan Modra <amodra@bigpond.net.au>
1400 * config/tc-i386.c (lex_got): Don't replace the reloc token with
1401 a space if we already have a space.
1403 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
1405 * config/tc-i386.c (match_template): Don't explicitly check
1406 suffix for crc32 in Intel mode.
1407 (process_suffix): Issue an error for crc32 if the operand size
1410 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
1411 Nick Clifton <nickc@redhat.com>
1414 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1415 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1416 (md_apply_fix): Put zero values into the frags referencing weak
1419 2007-05-02 Alan Modra <amodra@bigpond.net.au>
1422 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1425 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
1427 * config/tc-i386.c (match_template): Check suffix for crc32 in
1429 (process_suffix): Default the suffix of 8bit crc32 to
1431 (check_byte_reg): Skip check for 8bit crc32.
1433 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
1435 * config/tc-i386.c (md_assemble): Use register_prefix in
1436 error/warning message.
1437 (check_byte_reg): Likewise.
1438 (check_long_reg): Likewise.
1439 (check_qword_reg): Likewise.
1440 (check_word_reg): Likewise.
1441 (process_operands): Likewise.
1443 2007-04-30 Alan Modra <amodra@bigpond.net.au>
1446 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1449 2007-04-28 Thiemo Seufer <ths@networkno.de>
1451 * config/tc-mips.c: Fix comment.
1453 2007-04-26 Anatoly Sokolov <aesok@post.ru>
1455 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1456 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1457 * doc/c-avr.texi: Document new devices.
1459 2007-04-24 Alan Modra <amodra@bigpond.net.au>
1461 * Makefile.am: Run "make dep-am".
1462 * Makefile.in: Regenerate.
1464 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
1466 * config/tc-m68k.c (mcf54455_ctrl): New.
1467 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1468 (m68k_archs): Add isac.
1469 (m68k_cpus): Add 54455 family.
1470 (m68k_ip): Split Bg into Bb, Bs, Bg.
1471 (m68k_elf_final_processing): Add ISA_C.
1472 * doc/c-m68k.texi (M680x0 Options): Add isac.
1474 2007-04-22 Alan Modra <amodra@bigpond.net.au>
1476 * read.c (read_a_source_file): Skip multiple spaces to
1477 cover hack in mmix md_start_line_hook which overwrites a
1478 colon with a space. Delete sermon and needless assertion.
1480 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1482 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1483 (md_atof): Make number_of_chars unsigned. Revert last change.
1484 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1485 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1486 * config/tc-sh.h (md_optimize_expr): Likewise.
1487 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1489 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1491 2007-04-21 Nick Clifton <nickc@redhat.com>
1493 * config/atof-vax.c (md_atof): Fix comparison inside know().
1495 * config/tc-ia64.c (emit_one_bundle): Fix typo.
1497 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1499 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1500 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1501 Don't skip over NUL char.
1502 (pseudo_set): Set X_op for registers to O_register.
1503 * symbols.c (symbol_clone): Remove assertion that sym is defined.
1504 (resolve_symbol_value): Resolve O_register symbols.
1505 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1506 Instead find st(0) by hash lookup.
1507 * config/tc-ppc.c (ppc_macro): Warning fix.
1509 * as.h (ENABLE_CHECKING): Default define to 0.
1510 (know): Assert if ENABLE_CHECKING.
1511 (struct relax_type): Remove superfluous declaration.
1512 * configure.in (--enable-checking): New.
1513 * configure: Regenerate.
1514 * config.in: Regenerate.
1515 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1516 Check for duplicate powerpc_operands entries.
1518 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1520 * config/tc-m68k.c (mcf5253_ctrl): New.
1521 (mcf52223_ctrl): New.
1522 (m68k_cpus): Add 5253, 52221, 52223.
1524 * config/m68k-parse.h (RAMBAR_ALT): New.
1525 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1526 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1527 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1528 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1529 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1531 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1532 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1533 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1534 to control register mapping.
1536 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1538 * messages.c (as_internal_value_out_of_range): Fix typo in
1539 error message. Return after printing domain error.
1540 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1541 in max when shifting right.
1543 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1545 * messages.c (as_internal_value_out_of_range): Extend to report
1546 errors for values with invalid low bits set.
1547 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1548 fields. Check that operands and opcode fields are disjoint.
1549 (ppc_insert_operand): Check operands using mask rather than bit
1550 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1552 (md_apply_fix): Adjust for struct powerpc_operand change.
1554 2007-04-19 Paul Brook <paul@codesourcery.com>
1556 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1557 Thumb-1. Add sanity check for bogus relaxations.
1559 2007-04-19 Paul Brook <paul@codesourcery.com>
1561 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1563 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1565 * Makefile.am: Run "make dep-am".
1566 * Makefile.in: Regenerate.
1568 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1570 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1572 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1574 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1576 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1578 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1579 (match_template): Handle operand size for crc32 in SSE4.2.
1580 (process_suffix): Handle operand type for crc32 in SSE4.2.
1581 (output_insn): Support SSE4.2.
1583 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1585 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1586 (process_operands): Adjust implicit operand for blendvpd,
1587 blendvps and pblendvb in SSE4.1.
1588 (output_insn): Support SSE4.1.
1590 2007-04-18 Paul Brook <paul@codesourcery.com>
1592 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1594 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1596 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1597 of as_warn_where for misaligned data.
1599 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1601 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1604 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1606 * Makefile.am: Add ACLOCAL_AMFLAGS.
1607 * Makefile.in: Regenerate.
1609 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1611 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1612 (sh_optimize_expr): Likewise.
1613 * config/tc-sh.h (md_optimize_expr): Define.
1614 (sh_optimize_expr): Prototype.
1616 2007-04-06 Matt Thomas <matt@netbsd.org>
1618 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1619 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1620 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1622 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1624 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1626 2007-04-04 Paul Brook <paul@codesourcery.com>
1628 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1629 (insns): Use I15 for vext.
1631 2007-04-04 Paul Brook <paul@codesourcery.com>
1633 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1635 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1637 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1638 outputting_stabs_line_debug.
1640 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1642 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1643 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1645 * doc/c-avr.texi: Document new devices.
1647 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1649 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1650 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1651 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1653 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1654 Bob Wilson <bob.wilson@acm.org>
1656 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1657 Do not check is_loop_target flag.
1658 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1659 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1660 xtensa_move_labels for alignment of loop opcodes.
1662 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1664 * config/tc-i386.c (process_suffix): Reindent a bit.
1666 2007-03-30 Paul Brook <paul@codesourcery.com>
1668 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1669 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1670 (do_t_push_pop): Use encode_thumb2_ldmstm.
1672 2007-03-29 DJ Delorie <dj@redhat.com>
1674 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1675 (md_relax_table): Add entries for ADJNZ macros.
1676 (M32C_Macros): Add ADJNZ macros.
1677 (subtype_mappings): Add entries for ADJNZ macros.
1678 (insn_to_subtype): Check for adjnz and sbjnz insns.
1679 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1680 (md_convert_frag): Convert adjnz and sbjnz.
1682 2007-03-29 Nick Clifton <nickc@redhat.com>
1684 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1686 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1687 using ITBL_NUMBER_OF_PROCESSORS.
1688 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1690 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1692 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1693 register operands, encode destination in i.rm.regmem if its
1696 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1697 Phil Edwards <phil@codesourcery.com>
1699 * doc/as.texinfo: Put the contents after the title page rather
1700 than at the end of the document.
1702 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1704 * NEWS: Mention ".reloc".
1706 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1708 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1709 in FLIX instructions.
1711 2007-03-26 Julian Brown <julian@codesourcery.com>
1713 * config/tc-arm.c (arm_it): Add immisfloat field.
1714 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1715 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1716 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1718 (neon_cmode_for_move_imm): Reject non-float immediates for float
1720 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1722 2007-03-26 Julian Brown <julian@codesourcery.com>
1724 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1726 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1728 * doc/as.texinfo (Reloc): Document.
1729 * read.c (potable): Add "reloc".
1730 (s_reloc): New function.
1731 * write.c (reloc_list): New global var.
1732 (resolve_reloc_expr_symbols): New function.
1733 (write_object_file): Call it.
1734 (write_relocs): Process reloc_list.
1735 * write.h (struct reloc_list): New.
1736 (reloc_list): Declare.
1738 2007-03-24 Paul Brook <paul@codesourcery.com>
1740 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1742 2007-03-24 Paul Brook <paul@codesourcery.com>
1743 Mark Shinwell <shinwell@codesourcery.com>
1745 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1746 (parse_operands): Don't expect comma if first operand missing.
1748 (do_srs): Encode register number, checking it is r13. Update comment.
1749 (insns): Update SRS entries to take a register.
1751 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1753 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1755 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1757 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1758 attempt to jump to the next instruction into NOPs.
1760 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1762 * config/tc-spu.c: Don't include opcode/spu.h.
1763 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1764 (md_apply_fix): Adjust.
1765 * config/tc-spu.h: Include opcode/spu.h.
1766 (struct tc_fix_info): New.
1767 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1768 (TC_FORCE_RELOCATION): Define.
1770 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1772 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1774 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1776 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1777 xchg for xchg %rax,%rax.
1779 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1781 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1782 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1784 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1787 * config/tc-i386.c (match_template): Properly handle 64bit mode
1790 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1793 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1795 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1797 * Makefile.am: Run dep-am.
1798 * Makefile.in: Regenerated.
1800 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1802 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1803 (NOP_OPCODE): Removed.
1804 (template): Likewise.
1806 2007-03-21 Andreas Schwab <schwab@suse.de>
1808 * config/tc-i386.h (NOP_OPCODE): Restore.
1810 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1812 * config/tc-arm.c (do_mul): Don't warn about overlapping
1813 Rd and Rm operands when assembling for v6 or above.
1814 Correctly capitalize register names in the messages.
1815 (do_mlas): Likewise. Delete spurious blank line.
1817 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1819 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1821 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1823 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1825 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1828 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1831 * app.c (do_scrub_chars): PUT after setting states.
1833 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1835 * Makefile.am: Run "make dep-am".
1836 * Makefile.in: Regenerated.
1838 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1840 (md_begin): Check reg_name != NULL for the last entry in
1843 * config/tc-i386.h: Move many entries to opcode/i386.h and
1846 * configure.in (need_opcodes): Set true for i386.
1847 * configure: Regenerated.
1849 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1851 * Makefile.am (REPORT_BUGS_TO): Removed.
1852 (INCLUDES): Remove -DREPORT_BUGS_TO.
1853 * Makefile.in: Regenerated.
1855 * configure.in (--with-bugurl): Removed.
1856 * configure: Regenerated.
1858 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1859 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1860 (TEXI2DVI): Likewise.
1861 (gasver.texi): Removed.
1862 (MOSTLYCLEANFILES): Remove gasver.texi.
1863 (as.1): Don't depend on gasver.texi.
1864 * doc/Makefile.in: Regenerated.
1866 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1868 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1870 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1871 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1872 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1873 * gas/symbols.c (copy_symbol_attributes): Use
1874 TC_COPY_SYMBOL_ATTRIBUTES.
1876 2007-03-14 Paul Brook <paul@codesourcery.com>
1878 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1880 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1883 * write.c (relax_segment): Insert extra alignment padding
1884 to break infinite relax loop when given impossible
1885 gcc_except_table assembly.
1887 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1889 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1890 on i.tm.base_opcode.
1891 (match_template): Likewise.
1892 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1894 * config/tc-i386.h (Opcode_D): New.
1895 (Opcode_FloatR): Likewise.
1896 (Opcode_FloatD): Likewise.
1899 (FloatMF): Likewise.
1903 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1905 * app.c (do_scrub_chars): Recognize comments after # line "file".
1906 * read.c (get_linefile_number): New.
1907 (s_app_line): Accept ill-formed .linefile lines as comments.
1909 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1911 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1913 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1915 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1916 * as.h (new_logical_line_flags): New.
1917 * input-scrub.c (new_logical_line): Turned into wrapper for...
1918 (new_logical_line_flags): this. Handle flags.
1919 * read.c (potable): Add linefile. Adjust appline argument.
1920 (s_app_file): Fake .appfiles no more.
1921 (s_app_line): For .linefile, accept file name and flags.
1923 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1925 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1927 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1929 * Makefile.am: Run "make dep-am".
1930 * Makefile.in: Regenerate.
1931 * po/POTFILES.in: Regenerate.
1933 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1935 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1937 * doc/Makefile.am (gasver.texi): Define BUGURL.
1938 * doc/as.texinfo: Use BUGURL.
1939 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1941 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1943 * config/tc-s390.c (md_parse_option): z9-ec option added.
1945 2007-03-02 Paul Brook <paul@codesourcery.com>
1947 * config/tc-arm.c (relax_immediate): Always return positive values.
1948 (relaxed_symbol_addr): New function.
1949 (relax_adr, relax_branch): Use it.
1950 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1952 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1954 * as.c (parse_args): Update copyright date.
1956 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1958 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1960 2007-02-28 Nick Clifton <nickc@redhat.com>
1963 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1964 just return -1 whenever a problem is encountered.
1965 (md_assemble): If do_assemble returns -1 generate a non-fatal
1966 error message and return.
1969 * config/tc-msp430.c (line_separator_char): Change to '{'.
1971 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1973 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1974 (build_jump_insn): Likewise.
1975 (build_insn): Likewise.
1976 (s_m68hc11_relax): Likewise.
1978 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1980 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1982 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1984 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1986 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1988 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1989 (md_assemble): Likewise.
1991 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1993 * write.c (size_seg): Always clear SEC_RELOC here.
1994 (install_reloc): New function, extracted from..
1995 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1996 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1997 testing frag size. Set SEC_RELOC here.
1999 2007-02-21 Alan Modra <amodra@bigpond.net.au>
2002 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
2004 2007-02-20 Thiemo Seufer <ths@mips.com>
2006 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
2008 2007-02-20 Thiemo Seufer <ths@mips.com>
2010 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
2012 2007-02-20 Thiemo Seufer <ths@mips.com>
2013 Chao-Ying Fu <fu@mips.com>
2015 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
2016 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
2017 (macro_build): Add case '2'.
2018 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
2019 (validate_mips_insn): Add support for balign instruction.
2020 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
2021 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
2022 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
2023 command line options.
2024 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
2025 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
2026 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
2027 .set dspr2, .set nodspr2.
2029 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
2031 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
2032 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
2034 2007-02-18 Alan Modra <amodra@bigpond.net.au>
2036 * write.c (TC_FX_SIZE_SLACK): Define.
2037 (write_relocs): Reinstate check for fixup within frag.
2038 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
2039 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
2040 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
2041 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
2042 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
2044 2007-02-17 Mark Mitchell <mark@codesourcery.com>
2045 Nathan Sidwell <nathan@codesourcery.com>
2046 Vladimir Prus <vladimir@codesourcery.com
2047 Joseph Myers <joseph@codesourcery.com>
2049 * configure.in (--with-bugurl): New option.
2050 * configure: Regenerate.
2051 * dep-in.sed: Remove bin-bugs.h.
2052 * Makefile.am (REPORT_BUGS_TO): Define.
2053 (INCLUDES): Define REPORT_BUGS_TO.
2054 (DEP_INCLUDES): Likewise.
2055 ($(OBJS)): No longer depend on bin-bugs.h.
2056 * Makefile.in: Regenerate.
2057 * doc/Makefile.in: Regenerate.
2058 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
2059 * as.h: Remove include of bin-bugs.h.
2061 2007-02-17 Alan Modra <amodra@bigpond.net.au>
2063 * write.c: White space fixes.
2064 (fixup_segment): Move symbol_mri_common_p adjustments..
2065 (write_relocs): ..and symbol_equated_reloc_p adjustments..
2066 (adjust_reloc_syms): ..to here.
2068 2007-02-16 Alan Modra <amodra@bigpond.net.au>
2070 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
2071 xmalloc, memset. Don't bother assigning NULL to known zero mem.
2072 (subseg_set_rest): Remove unnecessary cast.
2073 * write.c: Include libbfd.h. Replace PTR with void * throughout.
2074 Remove unnecessary forward declarations and casts.
2075 (set_symtab): Delete extern bfd_alloc.
2076 (fixup_segment): Move.
2078 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
2080 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
2081 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
2082 (mcf5475_ctrl, mcf5485_ctrl): New.
2083 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
2084 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
2085 (init_table): Add asid, mmubar, adjust rombar0.
2087 2007-02-14 Alan Modra <amodra@bigpond.net.au>
2089 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
2090 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
2091 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
2092 code, and test for these insns using a combination of
2093 opcode_modifier and operand_types.
2095 2007-02-07 Paul Brook <paul@codesourcery.com>
2097 * configure.tgt: Add arm*-*-uclinux-*eabi.
2099 2007-02-05 Dave Brolley <brolley@redhat.com>
2100 Richard Sandiford <rsandifo@redhat.com>
2101 DJ Delorie <dj@redhat.com>
2102 Stan Cox <scox@redhat.com>
2103 Jim Blandy <jimb@redhat.com>
2104 Nick Clifton <nickc@redhat.com>
2105 Jim Wilson <wilson@redhat.com>
2106 Frank Ch. Eigler <fche@redhat.com>
2107 Graydon Hoare <graydon@redhat.com>
2108 Ben Elliston <bje@redhat.com>
2109 John Healy <jhealy@redhat.com>
2110 Richard Henderson <rth@redhat.com>
2112 * Makefile.am (CPU_TYPES): Add mep.
2113 (TARGET_CPU_CFILES): Add tc-mep.c.
2114 (TARGET_CPU_HFILES): Add tc-mep.h.
2115 (DEPTC_mep_elf): New variable.
2116 (DEPTC_mep_coff): Likewise.
2117 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
2118 * configure.in: Support mep.
2119 * configure.tgt: Likewise.
2120 * config/tc-mep.c: New file.
2121 * config/obj-elf.c: New file.
2122 * config/tc-mep.c: New file.
2123 * config/tc-mep.h: New file.
2124 * testsuite/gas/mep: New testsuite with content.
2125 * Makefile.in: Regenerate.
2126 * configure: Regenerate.
2128 2007-02-05 Dave Brolley <brolley@redhat.com>
2130 * cgen.c (gas_cgen_install_complex_reloc): Removed.
2131 (complex_reloc_installation_howto): Removed.
2133 2007-02-05 Dave Brolley <brolley@redhat.com>
2134 Graydon Hoare <graydon@redhat.com>
2135 DJ Delorie <dj@redhat.com>
2136 Catherine Moore <clm@redhat.com>
2137 Michael Chastain <chastain@redhat.com>
2138 Frank Ch. Eigler <fche@redhat.com>
2140 * symbols.c (use_complex_relocs_for): New, to decide
2141 when to use complex relocs. Add signed RELC support.
2142 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
2143 encode expression symbols as mangled complex relocation symbols (when
2144 compiled with -DOBJ_COMPLEX_RELOC).
2145 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
2146 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
2147 encode_addend with new args. Modify to get start, length from
2148 ifield whenever it is set. Also change condition on which
2149 self-describing relocs are encoded. Add hook into
2150 gas_cgen_encode_addend.
2151 (queue_fixup_recursively): Add signed RELC support. Change from masked
2152 expr to trunc flag. Restore assignment of sub-field value to
2153 temporary in fixups array. Reflect changed meaning of last arg to
2154 queue_fixup_recursively.
2155 (fixup): Add cgen_maybe_multi_ifield member.
2156 (make_right_shifted_expr): New function.
2157 (queue_fixup): Change to recursive function that fragments
2158 fixups if operand has a multi-ifield.
2159 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
2160 symbols, call weak_operand_overflow_check, and fragment call
2161 queue_fixup with operand fields.
2162 (gas_cgen_finish_insn) Modify to manage ifield pointer.
2163 (weak_operand_overflow_check): New function to try to select
2165 (gas_cgen_encode_addend): New function for relc.
2166 (gas_cgen_install_complex_reloc): Likewise.
2167 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
2168 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
2169 cgen_maybe_multi_ifield field to fx_cgen substructure.
2170 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
2171 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
2173 2007-02-03 DJ Delorie <dj@delorie.com>
2175 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
2177 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
2178 (m32c_cons_fix_new): Prototype.
2180 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2182 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
2183 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
2185 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2187 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
2188 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
2189 (map_suffix_reloc_to_operator): New.
2190 (map_operator_to_reloc): New.
2191 (expression_maybe_register): Fix incorrect test of return value from
2192 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
2193 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
2195 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2197 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
2198 (tinsn_get_tok): Delete prototype.
2199 * config/tc-xtensa.c (tinsn_get_tok): Delete.
2201 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2203 * config/xtensa-relax.h (struct build_instr): Delete id field.
2204 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
2206 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
2207 set op_data fields to zero.
2208 (parse_id_constant): Delete.
2209 (build_transition): Remove code to handle numbered literals and labels.
2211 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2213 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
2214 (build_transition_table): Likewise.
2216 2007-02-01 Bob Wilson <bob.wilson@acm.org>
2218 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2220 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2222 2007-02-02 Alan Modra <amodra@bigpond.net.au>
2224 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2225 (struct fix <fx_plt>): Rename to tcbit2.
2226 * write.c (fix_new_internal): Adjust.
2227 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2228 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2229 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2230 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2231 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2232 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2233 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2234 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2235 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2236 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2237 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2238 Instead, compare fx_r_type.
2239 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2240 fx_tcbit in place of fx_plt.
2241 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2242 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2245 2007-01-30 Nick Clifton <nickc@redhat.com>
2247 * as.c (main): Mark symbols created via the --defsym command line
2248 option as volatile so that they can be overridden later on by a
2249 .set directive. This maintains compatibility with the behaviour
2250 of earlier versions of the assembler.
2251 * doc/as.texinfo (--defsym): Document that the defined symbol's
2252 value can be overridden via a .set directive.
2254 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
2256 * config/tc-i386.c (swap_imm_operands): Renamed to ...
2257 (swap_2_operands): This. Take 2 ints.
2258 (md_assemble): Updated.
2259 (swap_operands): Call swap_2_operands to swap 2 operands.
2261 2007-01-24 DJ Delorie <dj@redhat.com>
2263 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2265 2007-01-22 Nick Clifton <nickc@redhat.com>
2268 * tc-score.c: Remove unnecessary uses of _().
2269 Make the err_msg[] a file level local array in order to save
2271 Remove unnecessary sprintf()s.
2273 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
2276 * config/tc-score.c : Using _() for const string.
2277 Do not assign inst.error with a local string pointer.
2278 (md_section_align): Pad section.
2280 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
2282 * config/tc-i386.c (build_modrm_byte): Check number of operands
2283 when procssing memory/register operand.
2285 2007-01-12 Nick Clifton <nickc@redhat.com>
2288 * macro.c (expand_irp): Do not ignore spaces inside quoted
2291 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2293 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2294 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2295 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2296 (TC_FORCE_RELOCATION): Define.
2297 (TC_FORCE_RELOCATION_LOCAL): Define.
2298 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2300 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2302 * input-file.c (input_file_open): Check fgets return.
2304 2007-01-11 Paul Brook <paul@codesourcery.com>
2306 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2308 2007-01-11 Nick Clifton <nickc@redhat.com>
2311 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2314 * config/tc-mcore.c (md_number_to_chars): Use
2315 number_to_chars_{big|little}endian.
2317 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
2319 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2320 architecture by itself.
2321 (m68k_ip): Don't issue a warning for tbl instructions on fido.
2322 (m68k_elf_final_processing): Treat Fido as an architecture by
2325 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
2327 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2329 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
2331 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2332 depending on allow_naked_reg.
2334 2007-01-04 Paul Brook <paul@codesourcery.com>
2336 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2338 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
2341 * config/tc-i386.c (register_prefix): New.
2342 (set_intel_syntax): Set set_intel_syntax to "" if register
2343 prefix isn't needed.
2344 (check_byte_reg): Use register_prefix for error message.
2345 (check_long_reg): Likewise.
2346 (check_qword_reg): Likewise.
2347 (check_word_reg): Likewise.
2349 2007-01-04 Julian Brown <julian@codesourcery.com>
2351 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2352 (do_neon_qshl_imm): Likewise.
2353 (do_neon_rshl): New function. Handle rounding variants of
2354 v{q}shl-by-register.
2355 (insns): Use do_neon_rshl for vrshl, vqrshl.
2357 2007-01-04 Paul Brook <paul@codesourcery.com>
2359 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2362 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2364 * config/tc-i386.c (swap_operands): Remove branches.
2366 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2368 * config/tc-i386.c: Update copyright year.
2369 * config/tc-i386.h: Likewise.
2371 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2373 * config/tc-i386.c (smallest_imm_type): Return unsigned int
2376 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2378 * config/tc-i386.c: Convert to ISO C90 formatting
2379 * config/tc-i386.h: Likewise.
2381 2007-01-03 David Daney <ddaney@avtrex.com>
2383 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
2386 For older changes see ChangeLog-2006
2392 version-control: never