1 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
3 * config/tc-i386.c (build_modrm_byte): Adjust comment line
6 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
8 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
11 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
13 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
15 2007-09-14 Michael Meissner <michael.meissner@amd.com>
16 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
17 Tony Linthicum <tony.linthicum@amd.com>
19 * NEWS: Add SSE5 support to NEWS file.
21 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
22 and build_modrm_byte to communicate.
23 (DREX_OC0): New SSE5 macro.
24 (DREX_OC0_MASK): Ditto.
26 (DREX_OC1_MASK): Ditto.
27 (DREX_XMEM_X1_X2_X2): Ditto.
28 (DREX_X1_XMEM_X2_X2): Ditto.
29 (DREX_X1_XMEM_X2_X1: Ditto.
30 (DREX_X1_X2_XMEM_X1: Ditto.
31 (DREX_XMEM_X1_X2): Ditto.
32 (DREX_X1_XMEM_X2): Ditto.
33 (drex_byte): New structure to describe the DREX byte.
35 * config/tc-i386.c (process_drex): New function to handle SSE5
37 (build_modrm_byte): Use the information cached away in
38 process_drex in the case of DREX instructions.
39 (i386_insn): Add drex field.
40 (pi): Add debugging of drex field.
41 (md_assemble): Treat SSE5 like SSE3 in instructions with an
42 immediate byte. Move REX field to DREX if this is a DREX
44 (process_operands): Add SSE5 support.
45 (build_modrm_byte): Ditto.
48 (i386_align_code): Ditto.
50 2007-09-12 Jan Beulich <jbeulich@novell.com>
52 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
53 after generic operand swapping, and swap only the immediate operands.
55 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
57 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
58 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
60 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
62 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
65 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
67 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
68 (cpu_flags_check_cpu64): This. Inline.
69 (uints_all_zero): New.
71 (uints_equal): Likewise
72 (UINTS_ALL_ZERO): Likewise
74 (UINTS_CLEAR): Likewise
75 (UINTS_EQUAL): Likewise
76 (cpu_flags_and): Likewise.
77 (cpu_flags_or): Likewise.
78 (operand_type_and): Likewise.
79 (operand_type_or): Likewise.
80 (operand_type_xor): Likewise.
81 (cpu_flags_not): Inline and use switch instead of loop.
82 (cpu_flags_match): Updated.
83 (operand_type_match): Likewise.
84 (smallest_imm_type): Likewise.
85 (set_cpu_arch): Likewise.
87 (md_assemble): Likewise.
88 (parse_insn): Likewise.
89 (optimize_imm): Likewise.
90 (match_template): Likewise.
91 (process_suffix): Likewise.
92 (update_imm): Likewise.
93 (finalize_imm): Likewise.
94 (process_operands): Likewise.
95 (build_modrm_byte): Likewise.
96 (i386_immediate): Likewise.
97 (i386_displacement): Likewise.
98 (i386_index_check): Likewise.
99 (i386_operand): Likewise.
100 (i386_target_format): Likewise.
101 (intel_e11): Likewise.
102 (operand_type): Remove implicitregister.
103 (operand_type_check): Updated. Inline.
104 (cpu_flags_all_zero): Removed.
105 (operand_type_all_zero): Likewise.
106 (i386_array_biop): Likewise.
107 (cpu_flags_biop): Likewise.
108 (operand_type_biop): Likewise.
110 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
112 * Makefile.am: Run "make dep-am".
113 * Makefile.in: Regenerate.
115 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
117 * configure.in (AC_CHECK_HEADERS): Add limits.h.
118 * configure: Regenerated.
119 * config.in: Likewise.
121 * config/tc-i386.c: Include "opcodes/i386-init.h".
122 (_i386_insn): Use i386_operand_type for types.
123 (cpu_arch_flags): Updated to new types with bitfield.
124 (cpu_arch_tune_flags): Likewise.
125 (cpu_arch_isa_flags): Likewise.
126 (cpu_arch): Likewise.
127 (i386_align_code): Likewise.
128 (set_code_flag): Likewise.
129 (set_16bit_gcc_code_flag): Likewise.
130 (set_cpu_arch): Likewise.
131 (md_assemble): Likewise.
132 (parse_insn): Likewise.
133 (process_operands): Likewise.
134 (output_branch): Likewise.
135 (output_jump): Likewise.
136 (parse_real_register): Likewise.
137 (mode_from_disp_size): Likewise.
138 (smallest_imm_type): Likewise.
140 (type_names): Likewise.
143 (swap_2_operands): Likewise.
144 (optimize_imm): Likewise.
145 (optimize_disp): Likewise.
146 (match_template): Likewise.
147 (check_string): Likewise.
148 (process_suffix): Likewise.
149 (check_byte_reg): Likewise.
150 (check_long_reg): Likewise.
151 (check_qword_reg): Likewise.
152 (check_word_reg): Likewise.
153 (finalize_imm): Likewise.
154 (build_modrm_byte): Likewise.
155 (output_insn): Likewise.
156 (disp_size): Likewise.
157 (imm_size): Likewise.
158 (output_disp): Likewise.
159 (output_imm): Likewise.
161 (i386_immediate): Likewise.
162 (i386_displacement): Likewise.
163 (i386_index_check): Likewise.
164 (i386_operand): Likewise.
165 (parse_real_register): Likewise.
166 (i386_intel_operand): Likewise.
167 (intel_e09): Likewise.
168 (intel_bracket_expr): Likewise.
169 (intel_e11): Likewise.
170 (cpu_arch_flags_not): New.
171 (cpu_flags_check_x64): Likewise.
172 (cpu_flags_all_zero): Likewise.
173 (cpu_flags_not): Likewise.
174 (i386_cpu_flags_biop): Likewise.
175 (cpu_flags_biop): Likewise.
176 (cpu_flags_match); Likewise.
180 (reg16_inoutportreg): Likewise.
184 (disp16_32): Likewise.
186 (baseindex): Likewise.
194 (imm16_32): Likewise.
195 (imm16_32s): Likewise.
196 (imm16_32_32s): Likewise.
197 (operand_type): Likewise.
198 (operand_type_check): Likewise.
199 (operand_type_match): Likewise.
200 (operand_type_register_match): Likewise.
201 (update_imm): Likewise.
202 (set_code_flag): Also update cpu_arch_flags_not.
203 (set_16bit_gcc_code_flag): Likewise.
204 (md_begin): Likewise.
205 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
206 Use cpu_flags_match to match instructions.
207 (i386_target_format): Update cpu_arch_isa_flags and
208 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
209 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
210 (match_template): Don't initialize overlap0, overlap1,
211 overlap2, overlap3 and operand_types.
212 (process_suffix): Handle crc32 with 64bit register.
214 (CONSISTENT_REGISTER_MATCH): Likewise.
216 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
219 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
221 * config/tc-i386.c (match_template): Handle invlpga, vmload,
222 vmrun and vmsave in SVME.
223 (process_suffix): Likewise.
225 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
227 * config/tc-i386.c (i386_index_check): Don't use RegRex
228 on the reg_type field.
229 (parse_real_register): Use `||' instead of `|'.
231 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
233 * config/tc-i386.c (process_operands): Remove segment override
234 check on SVME instructions.
235 (i386_index_check): Remove memory operand check on SVME
238 2007-09-04 Alan Modra <amodra@bigpond.net.au>
240 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
241 (md_assemble): Update init of insn. Use insn.reloc instead of
242 calculating from flag.
243 (get_imm): Set reloc rather than flag.
244 (calcop): Formatting.
246 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
248 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
250 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
252 * doc/c-arc.texi: Fix typo.
254 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
256 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
259 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
261 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
262 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
264 (m68k_cpus): Adjust 5407 entry.
266 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
268 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
269 (m68k_cpus): Define 51QE cpu.
271 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
272 Joseph Myers <joseph@codesourcery.com>
274 * as.c (main): Flush stderr before printing listings to ensure
275 consistent output order across platforms.
277 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
279 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
281 2007-08-24 Joseph Myers <joseph@codesourcery.com>
282 Paul Brook <paul@codesourcery.com>
285 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
286 * as.c (show_usage): Document --debug-prefix-map option.
287 (parse_args): Handle --debug-prefix-map.
288 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
289 * stabs.c (stabs_generate_asm_file): Remap debug paths.
290 * Makefile.am (GAS_CFILES): Add remap.c
291 (GENERIC_OBJS): Add remap.o.
292 Regenerate dependencies.
293 * Makefile.in: Regenerate.
294 * doc/as.texinfo (--debug-prefix-map): Document.
296 2007-08-24 Aurelien Jarno <aurel32@debian.org>
298 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
299 before printing them.
301 2007-08-24 Anders Waldenborg <anders@0x63.nu>
302 Alan Modra <amodra@bigpond.net.au>
304 * config/tc-i386.c (lex_got): Don't scan past a comma.
306 2007-08-23 Ben Elliston <bje@au.ibm.com>
308 * config/tc-ppc.c (parse_cpu): Handle "750cl".
309 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
310 (md_show_usage): Document -m750cl.
311 (md_assemble): Handle two delimiters in succession (eg. `),').
312 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
313 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
314 * testsuite/gas/ppc/ppc750ps.s: New file.
315 * testsuite/gas/ppc/ppc750ps.d: Likewise.
317 2007-08-23 Ben Elliston <bje@au.ibm.com>
319 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
321 2007-08-17 Alan Modra <amodra@bigpond.net.au>
324 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
326 (i386_immediate): Detect and complain about more cases of
327 invalid immediate expressions. Return failure rather than
328 converting them to zero.
329 (i386_displacement): Likewise.
331 2007-08-17 Alan Modra <amodra@bigpond.net.au>
333 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
335 2007-08-14 Andreas Schwab <schwab@suse.de>
337 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
340 2007-08-12 Matthias Klose <doko@ubuntu.com>
342 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
343 $(top_srcdir)/../../bfd/doc.
344 * doc/Makefile.in: Regenerate.
346 2007-08-10 Nick Clifton <nickc@redhat.com>
348 * NEWS: Add a marker for the 2.18 features.
350 2007-08-09 Paul Brook <paul@codesourcery.com>
352 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
354 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
356 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
358 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
360 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
361 DWORD memory to Reg64 in Intel synax.
362 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
363 Reg32 in Intel syntax.
365 2007-07-25 Sterling Augustine <sterling@tensilica.com>
367 * config/tc-xtensa.c (xtensa_extui_opcode): New.
368 (xg_expand_assembly_insn): Check for invalid extui operands.
369 (md_begin): Initialize xtensa_extui_opcode.
371 2007-07-24 Nick Clifton <nickc@redhat.com>
373 * config/tc-mep.h (skip_whitespace): Remove definition.
375 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
377 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
380 (f32_patt): Remove f32_15.
381 (f16_patt): Likewise.
382 (i386_align_code): Updated to alt_long_patt for 64bit by
385 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
387 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
389 * config/tc-i386.c (i386_align_code): Enable alignment up to
390 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
393 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
395 2007-07-20 Nick Clifton <nickc@redhat.com>
397 * app.c (do_scrub_chars): Provide a one character buffer to hold a
398 pushed back newline at the end of an unterminated quoted string.
400 2007-07-14 Nick Clifton <nickc@redhat.com>
402 * config/tc-arm.c (create_register_alias): Return a boolean rather
404 Check the return value of insert_reg_alias and do not continue to
405 create aliases once an insertion has failed.
406 (s_unreq): Delete the all-upper-case and all-lower-case
407 alternatives as well.
409 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
411 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
414 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
416 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
419 2007-07-04 Richard Sandiford <richard@codesourcery.com>
421 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
422 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
423 Deprecate *x and *fx.
424 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
427 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
429 * config/obj-coff.h (x86_64_target_format): Renamed to ...
430 (i386_target_format): This
431 (TARGET_FORMAT): Use i386_target_format.
433 * config/tc-i386.c (x86_64_target_format): Removed.
434 (i386_target_format): Handle PE formats.
436 2007-07-04 Nick Clifton <nickc@redhat.com>
438 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
439 to get the right length of printed value.
441 2007-07-03 Nick Clifton <nickc@redhat.com>
443 * COPYING: Replace with GPLv3 text.
444 * app.c: Update copyright notice to refer to GPLv3.
445 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
446 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
447 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
448 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
449 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
450 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
451 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
452 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
453 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
454 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
455 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
456 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
457 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
458 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
459 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
460 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
461 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
462 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
463 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
464 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
465 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
466 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
467 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
468 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
469 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
470 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
471 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
472 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
473 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
474 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
475 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
476 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
477 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
478 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
479 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
480 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
481 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
482 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
483 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
484 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
485 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
486 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
487 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
488 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
489 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
490 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
491 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
492 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
493 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
494 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
495 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
496 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
497 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
498 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
499 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
500 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
501 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
502 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
503 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
504 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
506 * flonum-mult.c: Likewise, and also correct typo referring to
507 non-existant GNU Assembler General Public License.
508 * config/tc-m68851.h: Likewise.
509 * NEWS: Mention the new license. Also note where the 2.17 release
511 * config/e-crisaout.c: Add copyright header.
512 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
513 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
514 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
515 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
516 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
517 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
518 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
519 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
520 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
521 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
522 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
523 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
524 config/te-wince-pe.h: Likewise.
526 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
528 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
529 (install_operand): Add E encoding.
530 (md_begin): Check and skip initial '.' arg character.
531 (get_num): Add 0..511 case.
533 2007-07-03 Alan Modra <amodra@bigpond.net.au>
536 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
537 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
539 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
542 * app.c (do_scrub_chars <state 5>): Check for output buffer full
545 2007-07-02 Joseph Myers <joseph@codesourcery.com>
547 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
548 s_dtprel_internal): New.
549 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
550 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
551 BFD_RELOC_MIPS_TLS_DTPREL64.
553 2007-07-02 Alan Modra <amodra@bigpond.net.au>
555 * Makefile.am: Run "make dep-am".
556 * Makefile.in: Regenerate.
557 * aclocal.m4: Regenerate.
558 * config.in: Regenerate.
559 * doc/Makefile.in: Regenerate.
560 * po/POTFILES.in: Regenerate.
561 * po/gas.pot: Regenerate.
563 2007-07-02 Alan Modra <amodra@bigpond.net.au>
565 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
566 coff section flag values to bfd section flag.
568 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
570 * aclocal.m4: Regenerated.
571 * doc/Makefile.in: Likewise.
572 * Makefile.in: Likewise.
574 2007-06-29 Joseph Myers <joseph@codesourcery.com>
576 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
578 2007-06-29 Joseph Myers <joseph@codesourcery.com>
580 * as.c (create_obj_attrs_section): New.
581 (main): Call create_obj_attrs_section for ELF.
582 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
583 skip_past_comma, s_vendor_attribute): New.
584 (potable): Add gnu_attribute for ELF.
585 * read.h (s_vendor_attribute): Declare.
586 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
587 round s_vendor_attribute.
588 (aeabi_set_public_attributes): Update for new attributes
590 (arm_md_end): Remove attributes contents setting now done
593 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
595 * Makefile.am: Add CR16 related entry.
596 * Makefile.in: Regenerate.
597 * config/tc-cr16.h: New file
598 * config/tc-cr16.c: New file
599 * doc/c-cr16.texi: New file for cr16
600 * doc/all.texi: Entry for cr16
601 * doc/Makefile.am: Added c-cr16.texi
602 * doc/Makefile.in: Regenerate
603 * doc/as.texinfo: Entry for CR16 target
604 * NEWS: Announce the support for the new target.
606 2007-06-26 Paul Brook <paul@codesourcery.com>
608 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
610 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
612 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
614 * config/tc-i386.c (process_operands): Replace regKludge
617 2007-06-25 Richard Sandiford <richard@codesourcery.com>
619 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
620 * config/tc-mips.c (append_insn): Record which symbols have
621 R_MIPS16_26 relocations against them.
622 (mips_fix_adjustable): Don't reduce relocations against such symbols.
624 2007-06-22 Sterling Augustine <sterling@tensilica.com>
626 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
627 (frag_format_size): Handle RELAX_IMMED_STEP3.
628 (xtensa_relax_frag, md_convert_frag): Likewise.
629 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
630 (RELAX_IMMED_MAXSTEPS): Adjust.
631 * config/xtensa-relax.c (widen_spec_list): Add transitions from
632 wide branches to branch-over-jumps.
633 (build_transition): Handle wide branches in transition patterns.
635 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
637 * config/tc-i386.c (disp_size): New.
638 (imm_size): Likewise.
639 (output_disp): Use disp_size and imm_size.
640 (output_imm): Use imm_size.
642 2007-06-19 Sterling Augustine <sterling@tensilica.com>
644 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
645 use of literal_frag field.
646 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
647 in the literal_frag field.
648 (xtensa_move_literals): Use it here instead of searching. Update
649 literal_frag field with new value.
651 2007-06-14 Paul Brook <paul@codesourcery.com>
653 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
654 narrow shift by immediate.
656 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
658 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
660 * acinclude.m4: Don't include m4 files.
661 (BFD_BINARY_FOPEN): Removed.
662 Remove libtool kludge.
664 * Makefile.in: Regenerated.
665 * doc/Makefile.in: Likewise.
666 * aclocal.m4: Likewise.
667 * configure: Likewise.
669 2007-06-11 Sterling Augustine <sterling@tensilica.com>
670 Bob Wilson <bob.wilson@acm.org>
672 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
673 (XTENSA_PROP_NO_TRANSFORM): ...this.
674 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
675 (xtensa_mark_frags_for_org): New.
676 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
677 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
678 (get_frag_property_flags): Adjust reference to is_no_transform flag.
679 (xtensa_frag_flags_combinable): Likewise.
680 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
681 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
683 2007-06-06 Paul Brook <paul@codesourcery.com>
685 * config/tc-arm.c (s_align): Pad code sections appropriately.
687 2007-06-05 Paul Brook <paul@codesourcery.com>
689 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
691 2007-06-05 Nick Clifton <nickc@redhat.com>
694 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
696 2007-06-05 Alan Modra <amodra@bigpond.net.au>
698 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
700 (tc_gen_reloc): Abort if neither addsy or subsy is set.
701 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
702 * config/tc-spu.h (md_operand): Handle @ppu without sym.
704 2007-05-31 Paul Brook <paul@codesourcery.com>
706 * config/tc-arm.c (insns): Allow strex on M profile cores.
708 2007-05-29 David S. Miller <davem@davemloft.net>
709 Jakub Jelinek <jakub@redhat.com>
712 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
713 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
715 2007-05-29 Alan Modra <amodra@bigpond.net.au>
717 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
719 2007-05-29 Alan Modra <amodra@bigpond.net.au>
721 * config/tc-ppc.c: Convert to ISO C.
722 * config/tc-ppc.c: Likewise.
724 2007-05-29 Alan Modra <amodra@bigpond.net.au>
726 * write.h (EXEC_MACHINE_TYPE): Delete.
727 (string_byte_count, section_alignment): Delete.
729 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
731 * app.c (do_scrub_chars): Cope with \ at end of buffer.
733 2007-05-26 Alan Modra <amodra@bigpond.net.au>
735 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
736 top 32 bits of 64 bit value if so doing results in passing
737 range check. Rewrite sign extension fudges similarly. Enable
738 fudges for powerpc64 too. Report user value if range check
739 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
740 range rather than value, also to report user value on failure.
742 2007-03-25 Paul Brook <paul@codesourcery.com>
744 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
745 (do_t_add_sub): Correctly encode subs pc, lr, #const.
746 (do_t_mov_cmp): Correctly encode movs pc, lr.
748 2007-05-24 Steve Ellcey <sje@cup.hp.com>
750 * Makefile.in: Regnerate.
751 * configure: Regenerate.
752 * aclocal.m4: Regenerate.
753 * doc/Makefile.in: Regenerate.
755 2007-05-22 Bob Wilson <bob.wilson@acm.org>
757 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
758 and index entries about automatic alignment of ENTRY instructions.
760 2007-05-22 Nick Clifton <nickc@redhat.com>
762 * doc/as.texinfo: Use @copying around the copyright notice.
764 2007-05-18 Joseph Myers <joseph@codesourcery.com>
766 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
769 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
772 2003-06-05 Michal Ludvig <mludvig@suse.cz>
773 * doc/as.texinfo: Document new directives: .cfi_restore,
774 .cfi_undefined, .cfi_same_value, .cfi_return_column,
775 .cfi_remember_state and .cfi_restore_state.
777 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
779 * config/tc-m68k.c (md_apply_fix): Show value of out of range
780 fixups in error message.
781 (md_conver_frag_1): Propagate the fix source location and use
782 as_bad_where rather than fatal, for better error messages.
784 2007-05-16 Paul Brook <paul@codesourcery.com>
786 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
788 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
790 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
792 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
795 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
796 addend is stored for relocs against weak symbols.
797 (md_apply_fix): So not loose track of addend for relocs against
800 2007-05-14 Thiemo Seufer <ths@mips.com>
802 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
804 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
806 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
807 addri, addri.c, subi, and subi.c when immediate number is hex.
808 (score_insns): Remove subis and subis.c.
809 (do_sub_rdi16): Delete.
811 2007-05-11 Alan Modra <amodra@bigpond.net.au>
813 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
815 (md_assemble): Tidy use of insn.flag.
816 (get_imm): Likewise. Handle uppercase input too.
817 (spu_cons): New function.
818 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
819 (TC_FORCE_RELOCATION): Don't resolve them either.
821 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
823 * config/tc-arm.c (md_apply_fix): Generate more accurate
824 diagnostic when 8-bit immediate range is exceeded for
825 BFD_RELOC_ARM_OFFSET_IMM8.
827 2007-05-04 Alan Modra <amodra@bigpond.net.au>
830 * config/tc-i386.c (lex_got): Don't replace the reloc token with
831 a space if we already have a space.
833 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
835 * config/tc-i386.c (match_template): Don't explicitly check
836 suffix for crc32 in Intel mode.
837 (process_suffix): Issue an error for crc32 if the operand size
840 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
841 Nick Clifton <nickc@redhat.com>
844 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
845 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
846 (md_apply_fix): Put zero values into the frags referencing weak
849 2007-05-02 Alan Modra <amodra@bigpond.net.au>
852 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
855 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
857 * config/tc-i386.c (match_template): Check suffix for crc32 in
859 (process_suffix): Default the suffix of 8bit crc32 to
861 (check_byte_reg): Skip check for 8bit crc32.
863 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
865 * config/tc-i386.c (md_assemble): Use register_prefix in
866 error/warning message.
867 (check_byte_reg): Likewise.
868 (check_long_reg): Likewise.
869 (check_qword_reg): Likewise.
870 (check_word_reg): Likewise.
871 (process_operands): Likewise.
873 2007-04-30 Alan Modra <amodra@bigpond.net.au>
876 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
879 2007-04-28 Thiemo Seufer <ths@networkno.de>
881 * config/tc-mips.c: Fix comment.
883 2007-04-26 Anatoly Sokolov <aesok@post.ru>
885 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
886 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
887 * doc/c-avr.texi: Document new devices.
889 2007-04-24 Alan Modra <amodra@bigpond.net.au>
891 * Makefile.am: Run "make dep-am".
892 * Makefile.in: Regenerate.
894 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
896 * config/tc-m68k.c (mcf54455_ctrl): New.
897 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
898 (m68k_archs): Add isac.
899 (m68k_cpus): Add 54455 family.
900 (m68k_ip): Split Bg into Bb, Bs, Bg.
901 (m68k_elf_final_processing): Add ISA_C.
902 * doc/c-m68k.texi (M680x0 Options): Add isac.
904 2007-04-22 Alan Modra <amodra@bigpond.net.au>
906 * read.c (read_a_source_file): Skip multiple spaces to
907 cover hack in mmix md_start_line_hook which overwrites a
908 colon with a space. Delete sermon and needless assertion.
910 2007-04-21 Alan Modra <amodra@bigpond.net.au>
912 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
913 (md_atof): Make number_of_chars unsigned. Revert last change.
914 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
915 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
916 * config/tc-sh.h (md_optimize_expr): Likewise.
917 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
919 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
921 2007-04-21 Nick Clifton <nickc@redhat.com>
923 * config/atof-vax.c (md_atof): Fix comparison inside know().
925 * config/tc-ia64.c (emit_one_bundle): Fix typo.
927 2007-04-21 Alan Modra <amodra@bigpond.net.au>
929 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
930 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
931 Don't skip over NUL char.
932 (pseudo_set): Set X_op for registers to O_register.
933 * symbols.c (symbol_clone): Remove assertion that sym is defined.
934 (resolve_symbol_value): Resolve O_register symbols.
935 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
936 Instead find st(0) by hash lookup.
937 * config/tc-ppc.c (ppc_macro): Warning fix.
939 * as.h (ENABLE_CHECKING): Default define to 0.
940 (know): Assert if ENABLE_CHECKING.
941 (struct relax_type): Remove superfluous declaration.
942 * configure.in (--enable-checking): New.
943 * configure: Regenerate.
944 * config.in: Regenerate.
945 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
946 Check for duplicate powerpc_operands entries.
948 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
950 * config/tc-m68k.c (mcf5253_ctrl): New.
951 (mcf52223_ctrl): New.
952 (m68k_cpus): Add 5253, 52221, 52223.
954 * config/m68k-parse.h (RAMBAR_ALT): New.
955 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
956 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
957 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
958 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
959 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
961 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
962 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
963 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
964 to control register mapping.
966 2007-04-20 Alan Modra <amodra@bigpond.net.au>
968 * messages.c (as_internal_value_out_of_range): Fix typo in
969 error message. Return after printing domain error.
970 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
971 in max when shifting right.
973 2007-04-20 Alan Modra <amodra@bigpond.net.au>
975 * messages.c (as_internal_value_out_of_range): Extend to report
976 errors for values with invalid low bits set.
977 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
978 fields. Check that operands and opcode fields are disjoint.
979 (ppc_insert_operand): Check operands using mask rather than bit
980 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
982 (md_apply_fix): Adjust for struct powerpc_operand change.
984 2007-04-19 Paul Brook <paul@codesourcery.com>
986 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
987 Thumb-1. Add sanity check for bogus relaxations.
989 2007-04-19 Paul Brook <paul@codesourcery.com>
991 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
993 2007-04-19 Alan Modra <amodra@bigpond.net.au>
995 * Makefile.am: Run "make dep-am".
996 * Makefile.in: Regenerate.
998 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1000 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1002 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1004 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1006 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1008 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1009 (match_template): Handle operand size for crc32 in SSE4.2.
1010 (process_suffix): Handle operand type for crc32 in SSE4.2.
1011 (output_insn): Support SSE4.2.
1013 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1015 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1016 (process_operands): Adjust implicit operand for blendvpd,
1017 blendvps and pblendvb in SSE4.1.
1018 (output_insn): Support SSE4.1.
1020 2007-04-18 Paul Brook <paul@codesourcery.com>
1022 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1024 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1026 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1027 of as_warn_where for misaligned data.
1029 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1031 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1034 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1036 * Makefile.am: Add ACLOCAL_AMFLAGS.
1037 * Makefile.in: Regenerate.
1039 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1041 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1042 (sh_optimize_expr): Likewise.
1043 * config/tc-sh.h (md_optimize_expr): Define.
1044 (sh_optimize_expr): Prototype.
1046 2007-04-06 Matt Thomas <matt@netbsd.org>
1048 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1049 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1050 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1052 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1054 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1056 2007-04-04 Paul Brook <paul@codesourcery.com>
1058 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1059 (insns): Use I15 for vext.
1061 2007-04-04 Paul Brook <paul@codesourcery.com>
1063 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1065 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1067 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1068 outputting_stabs_line_debug.
1070 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1072 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1073 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1075 * doc/c-avr.texi: Document new devices.
1077 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1079 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1080 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1081 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1083 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1084 Bob Wilson <bob.wilson@acm.org>
1086 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1087 Do not check is_loop_target flag.
1088 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1089 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1090 xtensa_move_labels for alignment of loop opcodes.
1092 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1094 * config/tc-i386.c (process_suffix): Reindent a bit.
1096 2007-03-30 Paul Brook <paul@codesourcery.com>
1098 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1099 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1100 (do_t_push_pop): Use encode_thumb2_ldmstm.
1102 2007-03-29 DJ Delorie <dj@redhat.com>
1104 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1105 (md_relax_table): Add entries for ADJNZ macros.
1106 (M32C_Macros): Add ADJNZ macros.
1107 (subtype_mappings): Add entries for ADJNZ macros.
1108 (insn_to_subtype): Check for adjnz and sbjnz insns.
1109 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1110 (md_convert_frag): Convert adjnz and sbjnz.
1112 2007-03-29 Nick Clifton <nickc@redhat.com>
1114 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1116 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1117 using ITBL_NUMBER_OF_PROCESSORS.
1118 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1120 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1122 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1123 register operands, encode destination in i.rm.regmem if its
1126 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1127 Phil Edwards <phil@codesourcery.com>
1129 * doc/as.texinfo: Put the contents after the title page rather
1130 than at the end of the document.
1132 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1134 * NEWS: Mention ".reloc".
1136 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1138 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1139 in FLIX instructions.
1141 2007-03-26 Julian Brown <julian@codesourcery.com>
1143 * config/tc-arm.c (arm_it): Add immisfloat field.
1144 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1145 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1146 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1148 (neon_cmode_for_move_imm): Reject non-float immediates for float
1150 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1152 2007-03-26 Julian Brown <julian@codesourcery.com>
1154 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1156 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1158 * doc/as.texinfo (Reloc): Document.
1159 * read.c (potable): Add "reloc".
1160 (s_reloc): New function.
1161 * write.c (reloc_list): New global var.
1162 (resolve_reloc_expr_symbols): New function.
1163 (write_object_file): Call it.
1164 (write_relocs): Process reloc_list.
1165 * write.h (struct reloc_list): New.
1166 (reloc_list): Declare.
1168 2007-03-24 Paul Brook <paul@codesourcery.com>
1170 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1172 2007-03-24 Paul Brook <paul@codesourcery.com>
1173 Mark Shinwell <shinwell@codesourcery.com>
1175 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1176 (parse_operands): Don't expect comma if first operand missing.
1178 (do_srs): Encode register number, checking it is r13. Update comment.
1179 (insns): Update SRS entries to take a register.
1181 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1183 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1185 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1187 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1188 attempt to jump to the next instruction into NOPs.
1190 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1192 * config/tc-spu.c: Don't include opcode/spu.h.
1193 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1194 (md_apply_fix): Adjust.
1195 * config/tc-spu.h: Include opcode/spu.h.
1196 (struct tc_fix_info): New.
1197 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1198 (TC_FORCE_RELOCATION): Define.
1200 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1202 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1204 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1206 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1207 xchg for xchg %rax,%rax.
1209 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1211 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1212 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1214 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1217 * config/tc-i386.c (match_template): Properly handle 64bit mode
1220 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1223 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1225 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1227 * Makefile.am: Run dep-am.
1228 * Makefile.in: Regenerated.
1230 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1232 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1233 (NOP_OPCODE): Removed.
1234 (template): Likewise.
1236 2007-03-21 Andreas Schwab <schwab@suse.de>
1238 * config/tc-i386.h (NOP_OPCODE): Restore.
1240 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1242 * config/tc-arm.c (do_mul): Don't warn about overlapping
1243 Rd and Rm operands when assembling for v6 or above.
1244 Correctly capitalize register names in the messages.
1245 (do_mlas): Likewise. Delete spurious blank line.
1247 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1249 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1251 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1253 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1255 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1258 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1261 * app.c (do_scrub_chars): PUT after setting states.
1263 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1265 * Makefile.am: Run "make dep-am".
1266 * Makefile.in: Regenerated.
1268 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1270 (md_begin): Check reg_name != NULL for the last entry in
1273 * config/tc-i386.h: Move many entries to opcode/i386.h and
1276 * configure.in (need_opcodes): Set true for i386.
1277 * configure: Regenerated.
1279 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1281 * Makefile.am (REPORT_BUGS_TO): Removed.
1282 (INCLUDES): Remove -DREPORT_BUGS_TO.
1283 * Makefile.in: Regenerated.
1285 * configure.in (--with-bugurl): Removed.
1286 * configure: Regenerated.
1288 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1289 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1290 (TEXI2DVI): Likewise.
1291 (gasver.texi): Removed.
1292 (MOSTLYCLEANFILES): Remove gasver.texi.
1293 (as.1): Don't depend on gasver.texi.
1294 * doc/Makefile.in: Regenerated.
1296 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1298 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1300 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1301 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1302 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1303 * gas/symbols.c (copy_symbol_attributes): Use
1304 TC_COPY_SYMBOL_ATTRIBUTES.
1306 2007-03-14 Paul Brook <paul@codesourcery.com>
1308 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1310 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1313 * write.c (relax_segment): Insert extra alignment padding
1314 to break infinite relax loop when given impossible
1315 gcc_except_table assembly.
1317 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1319 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1320 on i.tm.base_opcode.
1321 (match_template): Likewise.
1322 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1324 * config/tc-i386.h (Opcode_D): New.
1325 (Opcode_FloatR): Likewise.
1326 (Opcode_FloatD): Likewise.
1329 (FloatMF): Likewise.
1333 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1335 * app.c (do_scrub_chars): Recognize comments after # line "file".
1336 * read.c (get_linefile_number): New.
1337 (s_app_line): Accept ill-formed .linefile lines as comments.
1339 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1341 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1343 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1345 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1346 * as.h (new_logical_line_flags): New.
1347 * input-scrub.c (new_logical_line): Turned into wrapper for...
1348 (new_logical_line_flags): this. Handle flags.
1349 * read.c (potable): Add linefile. Adjust appline argument.
1350 (s_app_file): Fake .appfiles no more.
1351 (s_app_line): For .linefile, accept file name and flags.
1353 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1355 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1357 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1359 * Makefile.am: Run "make dep-am".
1360 * Makefile.in: Regenerate.
1361 * po/POTFILES.in: Regenerate.
1363 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1365 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1367 * doc/Makefile.am (gasver.texi): Define BUGURL.
1368 * doc/as.texinfo: Use BUGURL.
1369 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1371 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1373 * config/tc-s390.c (md_parse_option): z9-ec option added.
1375 2007-03-02 Paul Brook <paul@codesourcery.com>
1377 * config/tc-arm.c (relax_immediate): Always return positive values.
1378 (relaxed_symbol_addr): New function.
1379 (relax_adr, relax_branch): Use it.
1380 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1382 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1384 * as.c (parse_args): Update copyright date.
1386 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1388 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1390 2007-02-28 Nick Clifton <nickc@redhat.com>
1393 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1394 just return -1 whenever a problem is encountered.
1395 (md_assemble): If do_assemble returns -1 generate a non-fatal
1396 error message and return.
1399 * config/tc-msp430.c (line_separator_char): Change to '{'.
1401 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1403 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1404 (build_jump_insn): Likewise.
1405 (build_insn): Likewise.
1406 (s_m68hc11_relax): Likewise.
1408 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1410 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1412 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1414 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1416 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1418 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1419 (md_assemble): Likewise.
1421 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1423 * write.c (size_seg): Always clear SEC_RELOC here.
1424 (install_reloc): New function, extracted from..
1425 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1426 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1427 testing frag size. Set SEC_RELOC here.
1429 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1432 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1434 2007-02-20 Thiemo Seufer <ths@mips.com>
1436 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1438 2007-02-20 Thiemo Seufer <ths@mips.com>
1440 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1442 2007-02-20 Thiemo Seufer <ths@mips.com>
1443 Chao-Ying Fu <fu@mips.com>
1445 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1446 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1447 (macro_build): Add case '2'.
1448 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1449 (validate_mips_insn): Add support for balign instruction.
1450 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1451 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1452 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1453 command line options.
1454 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1455 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1456 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1457 .set dspr2, .set nodspr2.
1459 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1461 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1462 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1464 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1466 * write.c (TC_FX_SIZE_SLACK): Define.
1467 (write_relocs): Reinstate check for fixup within frag.
1468 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1469 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1470 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1471 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1472 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1474 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1475 Nathan Sidwell <nathan@codesourcery.com>
1476 Vladimir Prus <vladimir@codesourcery.com
1477 Joseph Myers <joseph@codesourcery.com>
1479 * configure.in (--with-bugurl): New option.
1480 * configure: Regenerate.
1481 * dep-in.sed: Remove bin-bugs.h.
1482 * Makefile.am (REPORT_BUGS_TO): Define.
1483 (INCLUDES): Define REPORT_BUGS_TO.
1484 (DEP_INCLUDES): Likewise.
1485 ($(OBJS)): No longer depend on bin-bugs.h.
1486 * Makefile.in: Regenerate.
1487 * doc/Makefile.in: Regenerate.
1488 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1489 * as.h: Remove include of bin-bugs.h.
1491 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1493 * write.c: White space fixes.
1494 (fixup_segment): Move symbol_mri_common_p adjustments..
1495 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1496 (adjust_reloc_syms): ..to here.
1498 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1500 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1501 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1502 (subseg_set_rest): Remove unnecessary cast.
1503 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1504 Remove unnecessary forward declarations and casts.
1505 (set_symtab): Delete extern bfd_alloc.
1506 (fixup_segment): Move.
1508 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1510 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1511 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1512 (mcf5475_ctrl, mcf5485_ctrl): New.
1513 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1514 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1515 (init_table): Add asid, mmubar, adjust rombar0.
1517 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1519 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1520 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1521 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1522 code, and test for these insns using a combination of
1523 opcode_modifier and operand_types.
1525 2007-02-07 Paul Brook <paul@codesourcery.com>
1527 * configure.tgt: Add arm*-*-uclinux-*eabi.
1529 2007-02-05 Dave Brolley <brolley@redhat.com>
1530 Richard Sandiford <rsandifo@redhat.com>
1531 DJ Delorie <dj@redhat.com>
1532 Stan Cox <scox@redhat.com>
1533 Jim Blandy <jimb@redhat.com>
1534 Nick Clifton <nickc@redhat.com>
1535 Jim Wilson <wilson@redhat.com>
1536 Frank Ch. Eigler <fche@redhat.com>
1537 Graydon Hoare <graydon@redhat.com>
1538 Ben Elliston <bje@redhat.com>
1539 John Healy <jhealy@redhat.com>
1540 Richard Henderson <rth@redhat.com>
1542 * Makefile.am (CPU_TYPES): Add mep.
1543 (TARGET_CPU_CFILES): Add tc-mep.c.
1544 (TARGET_CPU_HFILES): Add tc-mep.h.
1545 (DEPTC_mep_elf): New variable.
1546 (DEPTC_mep_coff): Likewise.
1547 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1548 * configure.in: Support mep.
1549 * configure.tgt: Likewise.
1550 * config/tc-mep.c: New file.
1551 * config/obj-elf.c: New file.
1552 * config/tc-mep.c: New file.
1553 * config/tc-mep.h: New file.
1554 * testsuite/gas/mep: New testsuite with content.
1555 * Makefile.in: Regenerate.
1556 * configure: Regenerate.
1558 2007-02-05 Dave Brolley <brolley@redhat.com>
1560 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1561 (complex_reloc_installation_howto): Removed.
1563 2007-02-05 Dave Brolley <brolley@redhat.com>
1564 Graydon Hoare <graydon@redhat.com>
1565 DJ Delorie <dj@redhat.com>
1566 Catherine Moore <clm@redhat.com>
1567 Michael Chastain <chastain@redhat.com>
1568 Frank Ch. Eigler <fche@redhat.com>
1570 * symbols.c (use_complex_relocs_for): New, to decide
1571 when to use complex relocs. Add signed RELC support.
1572 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1573 encode expression symbols as mangled complex relocation symbols (when
1574 compiled with -DOBJ_COMPLEX_RELOC).
1575 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1576 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1577 encode_addend with new args. Modify to get start, length from
1578 ifield whenever it is set. Also change condition on which
1579 self-describing relocs are encoded. Add hook into
1580 gas_cgen_encode_addend.
1581 (queue_fixup_recursively): Add signed RELC support. Change from masked
1582 expr to trunc flag. Restore assignment of sub-field value to
1583 temporary in fixups array. Reflect changed meaning of last arg to
1584 queue_fixup_recursively.
1585 (fixup): Add cgen_maybe_multi_ifield member.
1586 (make_right_shifted_expr): New function.
1587 (queue_fixup): Change to recursive function that fragments
1588 fixups if operand has a multi-ifield.
1589 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1590 symbols, call weak_operand_overflow_check, and fragment call
1591 queue_fixup with operand fields.
1592 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1593 (weak_operand_overflow_check): New function to try to select
1595 (gas_cgen_encode_addend): New function for relc.
1596 (gas_cgen_install_complex_reloc): Likewise.
1597 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1598 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1599 cgen_maybe_multi_ifield field to fx_cgen substructure.
1600 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1601 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1603 2007-02-03 DJ Delorie <dj@delorie.com>
1605 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1607 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1608 (m32c_cons_fix_new): Prototype.
1610 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1612 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1613 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1615 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1617 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1618 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1619 (map_suffix_reloc_to_operator): New.
1620 (map_operator_to_reloc): New.
1621 (expression_maybe_register): Fix incorrect test of return value from
1622 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1623 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1625 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1627 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1628 (tinsn_get_tok): Delete prototype.
1629 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1631 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1633 * config/xtensa-relax.h (struct build_instr): Delete id field.
1634 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1636 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1637 set op_data fields to zero.
1638 (parse_id_constant): Delete.
1639 (build_transition): Remove code to handle numbered literals and labels.
1641 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1643 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1644 (build_transition_table): Likewise.
1646 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1648 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1650 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1652 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1654 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1655 (struct fix <fx_plt>): Rename to tcbit2.
1656 * write.c (fix_new_internal): Adjust.
1657 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1658 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1659 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1660 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1661 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1662 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1663 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1664 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1665 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1666 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1667 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1668 Instead, compare fx_r_type.
1669 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1670 fx_tcbit in place of fx_plt.
1671 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1672 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1675 2007-01-30 Nick Clifton <nickc@redhat.com>
1677 * as.c (main): Mark symbols created via the --defsym command line
1678 option as volatile so that they can be overridden later on by a
1679 .set directive. This maintains compatibility with the behaviour
1680 of earlier versions of the assembler.
1681 * doc/as.texinfo (--defsym): Document that the defined symbol's
1682 value can be overridden via a .set directive.
1684 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1686 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1687 (swap_2_operands): This. Take 2 ints.
1688 (md_assemble): Updated.
1689 (swap_operands): Call swap_2_operands to swap 2 operands.
1691 2007-01-24 DJ Delorie <dj@redhat.com>
1693 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1695 2007-01-22 Nick Clifton <nickc@redhat.com>
1698 * tc-score.c: Remove unnecessary uses of _().
1699 Make the err_msg[] a file level local array in order to save
1701 Remove unnecessary sprintf()s.
1703 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1706 * config/tc-score.c : Using _() for const string.
1707 Do not assign inst.error with a local string pointer.
1708 (md_section_align): Pad section.
1710 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1712 * config/tc-i386.c (build_modrm_byte): Check number of operands
1713 when procssing memory/register operand.
1715 2007-01-12 Nick Clifton <nickc@redhat.com>
1718 * macro.c (expand_irp): Do not ignore spaces inside quoted
1721 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1723 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1724 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1725 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1726 (TC_FORCE_RELOCATION): Define.
1727 (TC_FORCE_RELOCATION_LOCAL): Define.
1728 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1730 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1732 * input-file.c (input_file_open): Check fgets return.
1734 2007-01-11 Paul Brook <paul@codesourcery.com>
1736 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1738 2007-01-11 Nick Clifton <nickc@redhat.com>
1741 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1744 * config/tc-mcore.c (md_number_to_chars): Use
1745 number_to_chars_{big|little}endian.
1747 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1749 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1750 architecture by itself.
1751 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1752 (m68k_elf_final_processing): Treat Fido as an architecture by
1755 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1757 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1759 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1761 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1762 depending on allow_naked_reg.
1764 2007-01-04 Paul Brook <paul@codesourcery.com>
1766 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1768 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1771 * config/tc-i386.c (register_prefix): New.
1772 (set_intel_syntax): Set set_intel_syntax to "" if register
1773 prefix isn't needed.
1774 (check_byte_reg): Use register_prefix for error message.
1775 (check_long_reg): Likewise.
1776 (check_qword_reg): Likewise.
1777 (check_word_reg): Likewise.
1779 2007-01-04 Julian Brown <julian@codesourcery.com>
1781 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1782 (do_neon_qshl_imm): Likewise.
1783 (do_neon_rshl): New function. Handle rounding variants of
1784 v{q}shl-by-register.
1785 (insns): Use do_neon_rshl for vrshl, vqrshl.
1787 2007-01-04 Paul Brook <paul@codesourcery.com>
1789 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1792 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1794 * config/tc-i386.c (swap_operands): Remove branches.
1796 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1798 * config/tc-i386.c: Update copyright year.
1799 * config/tc-i386.h: Likewise.
1801 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1803 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1806 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1808 * config/tc-i386.c: Convert to ISO C90 formatting
1809 * config/tc-i386.h: Likewise.
1811 2007-01-03 David Daney <ddaney@avtrex.com>
1813 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1816 For older changes see ChangeLog-2006
1822 version-control: never