gas/ChangeLog

   1 2011-06-30  Nick Clifton  <nickc@redhat.com>
   2
   3         PR gas/12848
   4         * config/tc-arm.c (BAD_RANGE): New error message define.
   5         (md_apply_fix): Use it.
   6         Fix range check for thumb branch instructions.
   7
   8 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
   9
  10         * config/tc-mips.c (append_method): New enum.
  11         (can_swap_branch_p, get_append_method): New functions.
  12         (append_insn): Use get_append_method to decide how the instruction
  13         should be added.
  14
  15 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  16
  17         * config/tc-mips.c (append_insn): Remove bogus goto.
  18
  19 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  20
  21         * config/tc-mips.c (append_insn): Always clear the history after an
  22         unconditional branch.
  23
  24 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  25
  26         * config/tc-mips.c (find_altered_mips16_opcode): New function.
  27         (append_insn): Use it.
  28
  29 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  30
  31         * config/tc-mips.c (insn_uses_reg): Delete.
  32         (gpr_read_mask, gpr_write_mask): New functions.
  33         (fpr_read_mask, fpr_write_mask): Likewise.
  34         (insns_between, nops_for_vr4130, append_insn): Use them.
  35
  36 2011-06-29  Richard Sandiford  <rdsandiford@googlemail.com>
  37
  38         * config/tc-mips.c (md_mips_end): Call mips_emit_delays.
  39
  40 2011-06-29  Dave Martin  <dave.martin@linaro.org>
  41
  42         PR gas/12931
  43         * config/tc-arm.c (mapping_state): When changing to ARM or THUMB
  44         state set the minimum required alignment of the section.
  45
  46 2011-06-29  Tristan Gingold  <gingold@adacore.com>
  47
  48         * config/tc-i386.c (i386_mach): Convert to ISO-C.
  49         (md_begin, pe_directive_secrel, md_estimate_size_before_relax): Ditto.
  50         (md_convert_frag, md_apply_fix, md_undefined_symbol): Ditto.
  51         (md_section_align, tc_gen_reloc): Ditto.
  52
  53 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  54
  55         * config/tc-alpha.c (s_alpha_pdesc): Fix indentation. Do not
  56         generate dummy fix.
  57
  58 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  59
  60         * config/tc-alpha.c (load_expression): Use alloca instead of xmalloc.
  61         (emit_jsrjmp): Ditto.
  62         (tc_gen_reloc): Ditto.
  63
  64 2011-06-28  Tristan Gingold  <gingold@adacore.com>
  65
  66         * config/tc-alpha.c (alpha_evax_proc_hash): Remove.
  67         (alpha_evax_proc_data): New variable.
  68         (s_alpha_ent): Prevent nested function.  Remove has_insert call.
  69         (s_alpha_pdesc): Do not call demand_empty_rest_of_line in case of
  70         error.  Do not search in the hash table.  Check if match with .ent.
  71         (s_alpha_name): Remove unused variable.
  72         (md_begin): Remove initialization of alpha_evax_proc_hash.
  73
  74 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  75
  76         * config/tc-alpha.c (add_to_link_pool): Remove basesym parameter.
  77         Locally declare basesym.  Add comments.  Do not set literal_pool_size.
  78         (load_expression): Adjust call to add_to_link_pool.
  79         (s_alpha_pdesc): Define pdesc symbol using dot.
  80         Do not set literal_pool_size.
  81         (s_alpha_end): Use NULL instead of 0.
  82
  83 2011-06-27  Tristan Gingold  <gingold@adacore.com>
  84
  85         * config/obj-evax.c (evax_frob_file_before_adjust): Add comments.
  86         Fix style.
  87         * config/obj-evax.h (struct alpha_linkage_fixups): Remove seg
  88         field.  Add comments.
  89         (obj_symbol_type, object_headers, OBJ_SYMFIELD_TYPE): Remove
  90
  91 2011-06-26  Richard Sandiford  <rdsandiford@googlemail.com>
  92
  93         * config/tc-mips.c (fix_24k_record_store_info): If the previous
  94         instruction was a store, and the next instructions are unknown,
  95         assume the worst.
  96
  97 2011-06-25  Richard Sandiford  <rdsandiford@googlemail.com>
  98
  99         PR gas/12915
 100         * config/tc-mips.c (nops_for_vr4130, nops_for_24k, nops_for_insn)
 101         (nops_for_sequence, nops_for_insn_or_target): Add ignore parameters.
 102         (mips_emit_delays, start_noreorder): Update accordingly.
 103         (append_insn): Likewise.  Revert original fix for this PR
 104         and use the ignore parameter instead.
 105
 106 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 107
 108         PR gas/11625
 109         * config/obj-evax.c (evax_frob_symbol): Use as_bad instead of abort.
 110
 111 2011-06-24  Tristan Gingold  <gingold@adacore.com>
 112
 113         * config/tc-alpha.c (add_to_link_pool): Remove useless offset
 114         variable.  Fix style.
 115
 116 2011-06-23  Richard Sandiford  <rdsandiford@googlemail.com>
 117
 118         PR gas/12915
 119         * config/tc-mips.c (append_insn): Only consider hazards between the
 120         pre-noreorder block and ip.
 121
 122 2011-06-21  Sameera Deshpande  <sameera.deshpande@arm.com>
 123
 124         * config/tc-arm.c (vfp_conv): Add check on range of immediate operand
 125         in vcvt instruction between floating-point and fixed-point.
 126         (operand_parse_code): Add "OP_oI32z".
 127         (parse_operands): OP_oI32z case added.
 128
 129 2011-06-20  H.J. Lu  <hongjiu.lu@intel.com>
 130
 131         * configure.tgt: Revert x32 change.
 132
 133 2011-06-20  Nick Clifton  <nickc@redhat.com>
 134
 135         * doc/Makefile.am: (CPU_DOCS): Add c-xstormy16.texi.
 136         * doc/Makefile.in: Regenerate.
 137         * doc/all.texi: Set XSTORMY16.
 138         * doc/c-xstormy16.texi: New file.
 139
 140 2011-06-19  H.J. Lu  <hongjiu.lu@intel.com>
 141
 142         * configure.tgt: Support x32.
 143
 144 2011-06-15  Nick Clifton  <nickc@redhat.com>
 145
 146         * NEWS: Mention addition of TILEPRO and TIKE-Gx support.
 147
 148 2011-06-14  Tristan Gingold  <gingold@adacore.com>
 149
 150         * config/tc-ppc.h (struct ppc_tc_sy): Complete comment on within.
 151         (tc_new_dot_label): Define.
 152         (ppc_new_dot_label): Declare.
 153         * config/tc-ppc.c (ppc_frob_label): Set within target field.
 154         (ppc_fix_adjustable): Use this field to adjust the reloc.
 155         (ppc_new_dot_label): New function.
 156
 157 2011-06-14  Alan Modra  <amodra@gmail.com>
 158
 159         * po/POTFILES.in: Regenerate.
 160
 161 2011-06-13  Walter Lee  <walt@tilera.com>
 162
 163         * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
 164         config/tc-tilepro.c.
 165         (TARGET_CPU_HFILES): Add config/tc-tilegx.h and
 166         config/tc-tilepro.h.
 167         * Makefile.in: Regenerate.
 168         * configure.tgt (tilepro-*-*): New.
 169         (tilegx-*-*): Likewise.
 170         * config/tc-tilegx.c: New file.
 171         * config/tc-tilegx.h: Likewise.
 172         * config/tc-tilepro.h: Likewise.
 173         * config/tc-tilepro.c: Likewise.
 174         * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
 175         c-tilepro.texi.
 176         * doc/Makefile.in: Regenerate.
 177         * doc/all.texi (TILEGX): Define.
 178         (TILEPRO): Define.
 179         * doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
 180         c-tilegx.texi and c-tilepro.texi.
 181         * doc/c-tilegx.texi: New.
 182         * doc/c-tilepro.texi: New.
 183
 184 2011-06-13  Nick Clifton  <nickc@redhat.com>
 185
 186         PR gas/12854
 187         * config/tc-arm.c (do_shift): Do not allow shift operations at the
 188         end of a register based shift insn.
 189         (do_t_shift): Likewise.
 190
 191 2011-06-13  Nick Clifton  <nickc@redhat.com>
 192
 193         * config/tc-score.c (s3_my_get_expression): Delete unused local
 194         variable 'seg'.
 195         (s3_do_ldst_insn): Delete unused local variable 'strbak'.
 196         (s3_do16_ldst_insn): Delete unused local variable 'temp'.
 197         (s3_do_macro_bcmp): Zero inst_expand array.
 198         (s3_do_macro_bcmpz): Likewise.
 199         (s3_s_score_end): Delete unused local variable 'dot'.
 200         (s3_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 201         * config/tc-score7.c (s7_my_get_expression): Delete unused local
 202         variable 'seg'.
 203         (s7_do_ldst_insn): Delete unused local variable 'strbak'.
 204         (s7_b32_relax_to_b16): Delete unused local variables 'r_old' and
 205         'r_new'.
 206         (s7_s_score_end): Delete unused local variable 'dot'.
 207         (s7_relax_frag): Delete unused local variable 'relax_size'.
 208         (s7_gen_reloc): Delete unused local variables 'f', 's', and 'e'.
 209
 210 2011-06-10  H.J. Lu  <hongjiu.lu@intel.com>
 211
 212         AVX Programming Reference (June, 2011)
 213         * config/tc-i386.c (i386_error): Add invalid_vsib_address and
 214         unsupported_vector_index_register.
 215         (cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
 216         (check_VecOperands): New.
 217         (match_template): Call check_VecOperands.  Handle
 218         invalid_vsib_address and unsupported_vector_index_register.
 219         (build_modrm_byte): Support VecSIB.  Check register-only source
 220         operand when two source operands are swapped.
 221         (i386_index_check): Allow Xmm/Ymm index registers.
 222
 223         * doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
 224         and invpcid./invpcid.
 225
 226 2011-06-09  Nick Clifton  <nickc@redhat.com>
 227
 228         PR gas/12861
 229         * config/tc-cr16.c (tc_gen_reloc): Remove unused local variable
 230         code.
 231         (check_cinv_options): Remove unused local variables.  Make
 232         function void.
 233         (md_assemble): Remove unused local variable.
 234
 235 2011-06-09  James Greenhalgh  <james.greenhalgh@arm.com>
 236
 237         * config/tc-arm.c (do_ldrd): Warn in unpredictable cases.
 238
 239 2011-06-03  Arnaud Patard  <arnaud.patard@rtp-net.org>
 240
 241         PR gas/12698
 242         * config/tc-arm.c (parse_psr): Set m_profile to false when
 243         assembling for any architecture.
 244
 245 2011-06-02  Jie Zhang jie@codesourcery.com
 246             Nathan Sidwell nathan@codesourcery.com
 247
 248         * config/tc-arm.c (parse_address_main): Handle -0 offsets.
 249         (encode_arm_addr_mode_2): Set default sign of zero here ...
 250         (encode_arm_addr_mode_3): ... and here.
 251         (encode_arm_cp_address): ... and here.
 252         (md_apply_fix): Use default sign of zero here.
 253
 254 2011-06-02  Nick Clifton  <nickc@redhat.com>
 255
 256         * as.c: Fix spelling typo.
 257         * read.c: Likewise.
 258         * config/tc-ppc.c: Likewise.
 259         * po/gas.pit: Regenerate.
 260
 261 2011-05-31  Paul Brook  <paul@codesourcery.com>
 262
 263         * config/tc-arm.c (arm_cpus): Add Cortex-R5.
 264         (arm_extensions): Allow idiv on ARMv7-R.
 265         * doc/c-arm.text: Update idiv extension restrictions.
 266
 267 2011-05-31  Paul Brook  <paul@codesourcery.com>
 268
 269         * config/tc-arm.c (arm_force_relocation): Resolve all pc-relative
 270         loads.
 271
 272 2011-05-31  Paul Brook  <paul@codesourcery.com>
 273
 274         * config/tc-arm.c (do_t_branch): Avoid relaxing branches to constant
 275         addresses.
 276
 277 2011-05-31  Paul Brook  <paul@codesourcery.com>
 278         Nathan Sidwell  <nathan@codesourcery.com>
 279
 280         * config/tc-arm.c (fix_new_arm): Create an absolute symbol for
 281         pc-relative fixes to constants.
 282         * config/tc-arm.h (TC_FORCE_RELOCATATION_ABS): Define.
 283
 284 2011-05-27  Nick Clifton  <nickc@redhat.com>
 285
 286         * config/tc-s390.c (md_begin): Remove unused variable dup_insn.
 287
 288 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 289
 290         * config/tc-s390.c (md_gather_operands): Fix check for floating
 291         register pair operands.
 292
 293 2011-05-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 294
 295         * config/tc-s390.c (md_gather_operands): Emit an error for odd
 296         numbered registers used as register pair operand.
 297
 298 2011-05-23  Nick Clifton  <nickc@redhat.com>
 299
 300         * config/tc-v850.h (TC_FX_SIZE_SLACK): Define.
 301
 302 2011-05-20  Bernd Schmidt  <bernds@codesourcery.com>
 303
 304         * config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
 305         (tic6x_parse_name): Handle it.
 306         (tic6x_fix_new_exp): Handle O_pcr_offset.
 307         (tic6x_fix_adjustable): Return 0 for the new relocs.
 308         (md_apply_fix): Handle them.
 309         (tc_gen_reloc): Likewise.
 310         * config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.
 311
 312 2011-05-18  Nick Clifton  <nickc@redhat.com>
 313
 314         PR gas/12754
 315         * config/tc-tic30.c (ordinal_names): Allow translation of the
 316         ordinal names.
 317
 318 2011-05-18  Nick Clifton  <nickc@redhat.com>
 319
 320         * config/tc-arm.c (s_unreq): Reword warning message to make it
 321         easier to translate.
 322         * config/tc-ia64.c (md_show_usage): Add note for translators.
 323         * configure.in (ALL_LINGUAS): Add "fi".
 324         * configure: Regenerate.
 325
 326 2011-05-18  Tristan Gingold  <gingold@adacore.com>
 327
 328         * config/tc-ppc.h (ppc_tc_sy): Reorder fields.
 329         Put size into an union with dw.
 330         (OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
 331         (ppc_xcoff_end): Declare.
 332         (md_end): Define.
 333         * config/tc-ppc.c: Add includes for xcoff.
 334         (ppc_dwsect): New function.
 335         (md_pseudo_table): Add dwsect.
 336         (struct dw_subsection): New.
 337         (dw_sections): New.
 338         (ppc_change_debug_section): New function.
 339         (ppc_xcoff_end): Ditto.
 340         (ppc_function): Adjust for ppc_tc_sy.
 341         (ppc_symbol_new_hook): Ditto.
 342         (ppc_frob_symbol): Ditto.
 343         (ppc_frob_section): Do not set vma for debug sections.
 344         (ppc_fix_adjustable): Return true for debug sections.
 345         * config/obj-coff.c: Add includes for xcoff.
 346         (coff_frob_section): Handle dwarf section.
 347
 348 2011-05-17  Nick Clifton  <nickc@redhat.com>
 349
 350         * po/fi.po: New Finnish translation.
 351         * po/fr.po: Updated French translation.
 352
 353         * config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
 354         * config/tc-mt.c (md_assemble): Fix typos in warning messages.
 355         * cond.c (s_else): Fix typos in error messages.
 356         * config/tc-pj.c (md_assemble): Fix typo in error message.
 357
 358 2011-05-16  Hans-Peter Nilsson  <hp@axis.com>
 359
 360         * config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
 361         emitting ELF object.
 362         (md_show_usage): Only mention --pic if the assembler can generate
 363         ELF objects.
 364         * doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
 365         prerequisite for --pic being a valid option.
 366
 367 2011-05-13  Frederic Marchal  <fmarchal@perso.be>
 368
 369         PR gas/12755
 370         * config/tc-v850.c (parse_register_list): Correct error string.
 371
 372 2011-05-12  Quentin Neill  <quentin.neill@amd.com>
 373
 374         * config/tc-i386.c (cpu_arch): Rename PROCESSOR_BDVER1 to PROCESSOR_BD.
 375         (i386_align_code): Ditto
 376
 377 2011-05-12  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
 378
 379         PR gas/12715
 380         * config/tc-arm.c (parse_big_immediate):  Fix parsing of 64-bit
 381         immediates on 32-bit hosts.
 382
 383 2011-05-10  Quentin Neill  <quentin.neill@amd.com>
 384
 385         * config/tc-i386.c (cpu_arch): Add bdver2 and rename
 386         PROCESSOR_BDVER1 to PROCESSOR_BDVER.
 387         (i386_align_code): Rename PROCESSOR_BDVER1.
 388         (processor_type): Ditto.
 389         * doc/c-i386.texi: Add bdver2.
 390
 391 2011-05-10  Alan Modra  <amodra@gmail.com>
 392
 393         * dw2gencfi.c (tc_cfi_endproc): Avoid "set but not used" error.
 394
 395 2011-05-09  Paul Brook  <paul@codesourcery.com>
 396
 397         * config/tc-tic6x.c (streq): Define.
 398         (tic6x_get_unwind): New.
 399         (s_tic6x_cantunwind, s_tic6x_handlerdata, s_tic6x_endp,
 400         s_tic6x_personalityindex, s_tic6x_personality): New functions.
 401         (md_pseudo_table): Add "endp", "handlerdata", "personalityindex",
 402         "personality" and "cantunwind".
 403         (tic6x_regname_to_dw2regnum, tic6x_frame_initial_instructions,
 404         tic6x_start_unwind_section, tic6x_unwind_frame_regs,
 405         tic6x_pop_rts_offset_little, tic6x_pop_rts_offset_big,
 406         tic6x_unwind_reg_from_dwarf, tic6x_flush_unwind_word,
 407         tic6x_unwind_byte, tic6x_unwind_2byte, tic6x_unwind_uleb,
 408         tic6x_cfi_startproc, output_exidx_entry, tic6x_output_unwinding,
 409         tic6x_cfi_endproc): New.
 410         * config/tc-tic6x.h (TIC6X_NUM_UNWIND_REGS): Define.
 411         (tic6x_unwind_info): New.
 412         (tic6x_segment_info_type): Add marked_pr_dependency, unwind and
 413         text_unwind.
 414         (TARGET_USE_CFIPOP, tc_regname_to_dw2regnum,
 415         tc_cfi_frame_initial_instructions, DWARF2_DEFAULT_RETURN_COLUMN,
 416         DWARF2_CIE_DATA_ALIGNMENT, tc_cfi_startproc, tc_cfi_endproc,
 417         tc_cfi_section_name): Define.
 418         * doc/c-tic6x.texi: Document new unwinding directives.
 419         * dw2gencfi.c (tc_cfi_startproc, tc_cfi_endproc): Add default
 420         definitions.
 421         (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset, CFI_return_column,
 422         CFI_rel_offset, CFI_escape, CFI_signal_frame, CFI_val_encoded_addr):
 423         Move to dw2gencfi.h.
 424         (CFI_EMIT_target): Define.
 425         (dot_cfi_sections): Check tc_cfi_section_name.
 426         (dot_cfi_startproc): Use tc_cfi_startproc.
 427         (dot_cfi_endproc): Use tc_cfi_endproc.
 428         * dw2gencfi.h (cfi_insn_data, fde_entry, CFI_adjust_cfa_offset,
 429         CFI_return_column, CFI_rel_offset, CFI_escape, CFI_signal_frame,
 430         CFI_val_encoded_addr):  Move to here from dw2gencfi.c.
 431
 432 2011-05-07  Alan Modra  <amodra@gmail.com>
 433
 434         * dw2gencfi.c (CUR_SEG, SET_CUR_SEG, HANDLED, SET_HANDLED): Define.
 435         Use throughout in place of #if SUPPORT_FRAME_LINKONCE.
 436         (struct fde_entry): Rename cseg to cur_seg.
 437         (cfi_change_reg_numbers): Remove ATTRIBUTE_UNUSED.
 438         (get_cfi_seg): Likewise.  Use if (SUPPORT_FRAME_LINKONCE) rather
 439         that #if SUPPORT_FRAME_LINKONCE.
 440         (cfi_finish): Likewise.
 441
 442 2011-05-06  Tristan Gingold  <gingold@adacore.com>
 443
 444         * read.c (s_comm_internal): Remove code for OBJ_VMS.
 445         (s_data): Ditto.
 446         (s_text): Ditto.
 447         * write.c (write_object_file): Ditto.
 448         * symbols.c (define_sym_at_dot): Ditto.
 449         (colon): Ditto.
 450
 451 2011-05-05  Alan Modra  <amodra@gmail.com>
 452
 453         * dw2gencfi.c (SUPPORT_FRAME_LINKONCE): Define.  Use throughout
 454         file to conditionally compile code added 2011-04-26.
 455         (cfi_change_reg_numbers): Add ATTRIBUTE_UNUSED on params only used
 456         when SUPPORT_FRAME_LINKONCE.
 457         (get_cfi_seg): Likewise.  Reintroduce old code for when not
 458         SUPPORT_FRAME_LINKONCE.
 459         (cfi_finish): Move get_cfi_seg calls out of loop when not
 460         SUPPORT_FRAME_LINKONCE.  Avoid unused var warning.
 461
 462 2011-05-03  Paul Brook  <paul@codesourcery.com>
 463
 464         * config/tc-tic6x.c (s_ehtype): New function.
 465         (md_pseudo_table): Add "ehtype".
 466         (tic6x_fix_adjustable, md_apply_fix): BFD_RELOC_C6000_EHTYPE.
 467         * doc/c-tic6x.texi: Document .ehtype directive.
 468
 469 2011-04-26  Kai Tietz  <ktietz@redhat.com>
 470
 471         * dw2gencfi.c (dwcfi_seg_list): New struct.
 472         (dwcfi_hash): New static hash variable.
 473         (get_debugseg_name): New.
 474         (alloc_debugseg_item): New.
 475         (make_debug_seg): New.
 476         (dwcfi_hash_insert): New.
 477         (dwcfi_hash_find): New.
 478         (dwcfi_hash_find_or_make): New.
 479         (cfi_insn_data): New member cur_seg.
 480         (cie_entry): Likewise.
 481         (fde_entry): New cseg and handled members.
 482         (alloc_fde_entry): Initialize cseg member.
 483         (alloc_cfi_insn_data): Initialize cur_seg member.
 484         (dot_cfi_sections): Compare for beginning of
 485         section names via strncmp.
 486         (get_cfi_seg): New.
 487         (cfi_finish): Treat link-once sections.
 488         (is_now_linkonce_segment): New local helper.
 489         (output_cie): Ignore cie entries not member of current
 490         segment.
 491         (output_fde): Likewise.
 492         (select_cie_for_fde): Likewise.
 493         (cfi_change_reg_numbers): Add new argument for current segment
 494         and ignore insn elements, if not part of current segment.
 495         * ehopt.c (get_cie_info): Use strncmp for
 496         section name matching.
 497         (heck_eh_frame): Likewise.
 498
 499 2011-04-20  Catherine Moore  <clm@codesourcery.com>
 500             David Ung <davidu@mips.com>
 501
 502         * config/mips.c (mips_cl_insn): Add new field complete_p.
 503         (create_insn): Initialize complete_p to zero.
 504         (BASE_REG_EQ): New.
 505         (fix_24k_align_to): New.
 506         (fix_24k_store_info): Declare.
 507         (fix_24k_sort): New.
 508         (fix_24k_record_store_info): New.
 509         (nops_for_24k): New.
 510         (nops_for_insn): Call nops_for_24k.
 511         (append_insn): Move O_constant expression handling.
 512
 513 2011-04-20  Alan Modra  <amodra@gmail.com>
 514
 515         * hash.c (set_gas_hash_table_size): Use bfd_hash_set_default_size.
 516         (hash_new_sized): New function, split out from..
 517         (hash_new): ..here.
 518
 519 2011-04-19  Nick Clifton  <nickc@redhat.com>
 520
 521         * config/tc-arm.c (v7m_psrs): Revert previous delta.
 522
 523 2011-04-18  Julian Brown  <julian@codesourcery.com>
 524             Nick Clifton  <nickc@redhat.com>
 525
 526         * config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
 527         detect M-profile targets.
 528         (do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
 529         (v7m_psrs): Fix typo: basepri_max should be basepri_mask.
 530
 531 2011-04-14  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 532
 533         * config/tc-s390.c (s390_machine): New prototype.
 534         (md_pseudo_table): New pseudo-op .machine.
 535         (s390_opcode_hash): Initialize to NULL.
 536         (s390_parse_cpu): New function.
 537         (md_parse_option): Use s390_parse_cpu.
 538         (s390_setup_opcodes): New function.
 539         (md_begin): Use s390_setup_opcodes.
 540         (s390_machine): New hook handling the new .machine pseudo.
 541
 542         * doc/c-s390.texi: Document the new pseudo op .machine.
 543
 544 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 545
 546         * config/tc-i386.c (i386_mach): Start error message with lower
 547         case.
 548         (md_begin): Likewise.
 549         (md_parse_option): Likewise.
 550         (i386_target_format): Likewise.
 551         (check_byte_reg): Likewise.
 552         (check_long_reg): Likewise.
 553         (check_qword_reg): Likewise.
 554         (check_word_reg): Likewise.
 555
 556 2011-04-12  Nick Clifton  <nickc@redhat.com>
 557
 558         PR gas/12532
 559         * config/tc-arm.c (relax_branch): Do not relax branches to
 560         preemptable global symbols.
 561
 562 2011-04-11  Julian Brown  <julian@codesourcery.com>
 563
 564         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
 565         for *APSR bitmasks.
 566         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
 567         Remove OP_RVC_PSR.
 568         (parse_operands): Likewise.
 569         (do_mrs): Tweak error message for constraint.
 570         (do_t_mrs): Update constraints for changes to APSR support.
 571         (do_t_msr): Likewise. Don't set PSR_f flag here.
 572         (psrs): Remove "g", "nzcvq", "nzcvqg".
 573         (insns): Tweak entries for msr and mrs instructions.
 574
 575 2011-04-11  Kai Tietz  <ktietz@redhat.com>
 576
 577         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
 578
 579 2011-04-11  Nick Clifton  <nickc@redhat.com>
 580
 581         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
 582         * config/tc-i386.h (x86_cons): Always prototype.
 583
 584         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
 585         in order to avoid a compile time warning.
 586         (getprocreg_image): Likewise.
 587
 588 2011-04-11  Alan Modra  <amodra@gmail.com>
 589
 590         * config/tc-cr16.c (getprocreg_image): Correct range check.
 591         (getprocregp_image): Likewise.
 592
 593 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
 594
 595         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
 596         xscale*be|xscale*b, xscale*): Remove architectures.
 597         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
 598         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
 599
 600 2011-04-01  Tristan Gingold  <gingold@adacore.com>
 601
 602         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
 603
 604 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
 605
 606         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
 607         static variables.
 608         (md_begin): Initialize them.
 609         (s_tic6x_scomm): New static function.
 610         (md_pseudo_table): Add "scomm".
 611         (tc_gen_reloc): Really undo all adjustments made by
 612         bfd_install_relocation.
 613         * doc/c-tic6x.texi: Document the .scomm directive.
 614
 615 2011-03-31  Tristan Gingold  <gingold@adacore.com>
 616
 617         * dwarf2dbg.c (DWARF2_VERSION): Define.
 618         (out_debug_line): Use it.
 619         (out_debug_aranges): Ditto.
 620         (out_debug_info): Ditto.
 621         * config/tc-ia64.h (DWARF2_VERSION): Override it.
 622
 623 2011-03-30  Michael Snyder  <msnyder@vmware.com>
 624
 625         * obj-elf.c (obj_elf_section): Free malloced name.
 626         * macro.c (get_any_string): Free malloced br_buf.
 627         (do_formals): Free 'formal'.
 628
 629 2011-03-30  Tristan Gingold  <gingold@adacore.com>
 630
 631         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
 632         to offset only if within is set.
 633         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
 634         within only for symbols.
 635
 636 2011-03-29  Richard Henderson  <rth@redhat.com>
 637
 638         PR 12610
 639         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
 640         label; zap alpha_insn_label.
 641
 642 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 643
 644         * config/tc-i386.c (handle_quad): Properly handle multiple
 645         operands.
 646
 647 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 648
 649         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 650         reg $2 is the same as dest reg $4.
 651
 652 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 653
 654         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 655         reg $2 is the same as dest reg $4.
 656
 657 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 658
 659         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 660         reg $2 is the same as dest reg $4.
 661
 662 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 663
 664         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 665         reg $1 is the same as dest reg $7.
 666
 667 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 668
 669         * config/tc-i386.c (handle_quad): New.
 670         (md_pseudo_table): Add "quad".
 671
 672 2011-03-26  John Marino  <binutils@marino.st>
 673
 674         * configure.tgt: Fix support for *-*-dragonfly*.
 675         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 676         * config/te-dragonfly.h: New file.
 677
 678 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 679
 680         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 681         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 682         at90pwm161.
 683         * doc/c-avr.texi: Document new device names.
 684
 685 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 686
 687         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 688         reg $1 is the same as dest reg $7.
 689         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 690         dest reg $7.
 691
 692 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 693
 694         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 695         P is mismatched.  Check destination regno are off by one when P is
 696         set, or are equal when P is not set.
 697
 698 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 699
 700         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
 701         the same as dest reg $4.
 702         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
 703
 704 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
 705
 706         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
 707         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
 708         * doc/c-avr.texi: Document new device names.
 709
 710 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
 711
 712         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
 713         (AVR_INSN): Change definition to match.
 714         (avr_opcodes): Likewise, change to match.
 715         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
 716         (md_show_usage): Add XMEGA architecture names.
 717         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
 718         Add support for SPM Z+ instruction.
 719         * doc/c-avr.texi: Add documentation for XMEGA architectures and
 720         devices.
 721
 722 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
 723
 724         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
 725
 726 2011-03-18  Alan Modra  <amodra@gmail.com>
 727
 728         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
 729         on .size expression errors rather than symbols in the size expression.
 730
 731 2011-03-18  Alan Modra  <amodra@gmail.com>
 732
 733         * input-scrub.c (line_numberT): Delete.
 734         (input_scrub_close): Reset line counters.
 735         * messages.c (as_show_where): Don't print invalid line number.
 736         (as_warn_internal, as_bad_internal): Likewise.
 737
 738 2011-03-18  Alan Modra  <amodra@gmail.com>
 739
 740         * read.c (read_a_source_file): Remove md_after_pass_hook.
 741         Move "quit" label before set of dot_symbol.
 742         * config/tc-d10v.h (md_after_pass_hook): Don't define.
 743         * config/tc-d30v.h (md_after_pass_hook): Likewise.
 744         * config/tc-m32r.h (md_after_pass_hook): Likewise.
 745         (md_cleanup): Define to call m32r_fill_insn.
 746
 747 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 748
 749         * config/tc-s390.c (md_parse_option): Add -march=all option which
 750         switches to the highest available CPU.
 751
 752 2011-03-17  Alan Modra  <amodra@gmail.com>
 753
 754         PR 12569
 755         * expr.c (operand): Correct passing of "mode" to expr.
 756         * read.c (do_org): Allow expr_section.
 757         (get_known_segmented_expression): Don't assert anything about the
 758         segment.
 759
 760 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
 761
 762         * as.c (show_usage): Add --size-check=.
 763         (parse_args): Add and handle OPTION_SIZE_CHECK.
 764
 765         * as.h (flag_size_check): New.
 766
 767         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
 768         bad .size directive only for --size-check=error.
 769
 770         * doc/as.texinfo: Document --size-check=.
 771
 772 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
 773
 774         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
 775         bf542/bf544/bf547/bf548/bf549.
 776
 777 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 778
 779         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
 780         determine whether a relocation is needed.
 781         (md_apply_fix, arm_apply_sym_value): Likewise.
 782
 783 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 784
 785         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
 786         for Thumb symbols.
 787
 788 2011-03-11  Nick Clifton  <nickc@redhat.com>
 789
 790         * remap.c (remap_debug_filename): Always allocate a buffer for the
 791         returned pointer.
 792         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
 793         remap_debug_filename.
 794
 795 2011-03-10  Michael Snyder  <msnyder@vmware.com>
 796
 797         Revert the following change:
 798         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 799         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 800
 801 2011-03-10  Alan Modra  <amodra@gmail.com>
 802
 803         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
 804         TARGET_SYMBOL_FIELDS): Don't define.
 805         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
 806
 807 2011-03-09  Michael Snyder  <msnyder@vmware.com>
 808
 809         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 810         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 811         (emit_fixed_inc_line_addr): Assign instead of conditional in
 812         assert.
 813
 814 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 815
 816         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
 817         non-constant .size expression.
 818
 819 2011-03-02  Nick Clifton  <nickc@redhat.com>
 820
 821         * ecoff.c: Incldue filenames.h
 822
 823 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
 824
 825         * depend.c (register_dependency): Use filename_(n)cmp.
 826         * dwarf2dbg.c (get_filenum): Likewise.
 827         * ecoff.c (add_file): Likewise.
 828         (ecoff_generate_asm_lineno): Likewise.
 829         * input-scrub.c (new_logical_line_flags): Likewise.
 830         * listing.c (file_info): Likewise.
 831         (listing_newline): Likewise.
 832         * remap.c (remap_debug_filename): Likewise.
 833         * stabs.c (generate_asm_file): Likewise.
 834         (stabs_generate_asm_lineno): Likewise.
 835
 836 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 837
 838         * config/tc-mips.c (append_insn): Disable branch relaxation for
 839         DSP instructions.
 840
 841 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 842
 843         * config/tc-mips.c (macro): Handle M_PREF_AB.
 844
 845 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 846
 847         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
 848         register to use.
 849         (RELAX_BRANCH_UNCOND): Adjust accordingly.
 850         (RELAX_BRANCH_LIKELY): Likewise.
 851         (RELAX_BRANCH_LINK): Likewise.
 852         (RELAX_BRANCH_TOOFAR): Likewise.
 853         (RELAX_BRANCH_AT): New macro.
 854         (append_insn): Encode the temporary register to use in standard
 855         MIPS branch relaxation.
 856         (relaxed_branch_length): Update according to changes to
 857         RELAX_BRANCH_ENCODE.
 858         (md_convert_frag): Use the encoded register as the temporary.
 859
 860 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 861
 862         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
 863         reject PC-relative relocations.
 864
 865 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 866
 867         * config/tc-mips.c (md_convert_frag): Correct message
 868         capitalization.
 869
 870 2011-02-28  Alan Modra  <amodra@gmail.com>
 871
 872         * symbols.c (report_op_error): Remove unnecessary forward declaration.
 873         Add "op" parameter.  Report operator and operand segments in error
 874         message, not operand symbols.
 875         (resolve_symbol_value): Always set segment for equated symbols, not
 876         just when finalizing.  Adjust report_op_error calls.
 877
 878 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 879
 880         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
 881         if 64bit relocations aren't allowed.
 882
 883 2011-02-25  Alan Modra  <amodra@gmail.com>
 884
 885         PR gas/12519
 886         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
 887
 888 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
 889
 890         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
 891         initialization of offset_reloc.
 892
 893 2011-02-15  Richard Henderson  <rth@redhat.com>
 894
 895         * dw2gencfi.c (dot_cfi_dummy): New.
 896         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
 897         * read.c (pobegin): Unconditionally call cfi_pop_insert.
 898
 899 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 900
 901         * configure: Regenerate.
 902
 903 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
 904
 905         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
 906         * config/bfin-parse.y (BYTEOP2M): Delete token.
 907         (asm_1): Remove BYTEOP2M insn matching.
 908
 909 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
 910
 911         * config/bfin-defs.h: Include opcode/bfin.h.
 912         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
 913
 914 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 915
 916         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
 917         (Modify Registers): Fix subtracted typo.
 918         (.byte2): Extend and swap descriptions with .byte4.
 919         (.byte4): Extend and swap descriptions with .byte2.
 920         (.db, .dw, .dd): Document behavior.
 921
 922 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 923
 924         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
 925
 926 2011-02-11  Alan Modra  <amodra@gmail.com>
 927
 928         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
 929
 930 2011-02-10  Alan Modra  <amodra@gmail.com>
 931
 932         * doc/as.texinfo (Overview): Add missing markup around Blackfin
 933         and PowerPC options.
 934
 935 2011-02-10  Alan Modra  <amodra@gmail.com>
 936
 937         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
 938         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
 939         (Overview <Target PowerPC options>): Add a number of missing options.
 940         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
 941
 942 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 943
 944         PR gas/6957
 945         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
 946         for i686.
 947
 948 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 949
 950         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
 951         for ISA extensions.
 952         (md_parse_option): Likewise.
 953
 954 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
 955
 956         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
 957         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
 958         (TIC6X Options): Don't mention "-matomic".
 959         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
 960         (md_longopts): Remove corresponding entries.
 961         (md_parse_option): Don't handle them.
 962         (md_show_usage): Don't document them.
 963         (tic6x_atomic): Delete variable.
 964         (tic6x_update_features): Always copy tic6x_arch_enable to
 965         tic6x_features.
 966         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
 967         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
 968         (md_pseudo_table): Remove ".atomic" and ".noatomic".
 969
 970 2011-01-31  Nick Clifton  <nickc@redhat.com>
 971
 972         * write.c (write_contents): Include output file name and bfd error
 973         value when reporting the inability to write to the output file.
 974         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
 975         frag that has a non-zero fill value.
 976
 977 2011-01-27  DJ Delorie  <dj@redhat.com>
 978
 979         * config/tc-rx.c (md_convert_frag): If we can't compute the target
 980         address, zero out the values stored in the object file to make
 981         objdump's output consistent.
 982
 983 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
 984
 985         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
 986         x86_dwarf2_return_column to 32.
 987
 988 2011-01-20  Nick Clifton  <nickc@redhat.com>
 989
 990         PR gas/12384
 991         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
 992         comparison.
 993
 994 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 995
 996         * write.c (compress_debug): Return if section size is smaller
 997         than 32 bytes.
 998
 999 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
1000
1001         PR gas/12409
1002         * write.c (compress_debug): Return if section size is 0.
1003
1004 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
1005
1006         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
1007         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
1008         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
1009         fmp626} options.
1010
1011 2011-01-18  Nick Clifton  <nickc@redhat.com>
1012
1013         PR gas/12390
1014         * doc/all.texi: Add NS32K
1015         * doc/as.texinfo: Remove target specific details of which
1016         characters act as comment initiators and statement separators into
1017         individual target specific files.
1018         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
1019         the hash character at the start of a line.
1020         * doc/c-arm.texi (ARM-Chars): Likewise.
1021         * doc/c-avr.texi (AVR-Chars): Likewise.
1022         * doc/c-d10v.texi (D10V-Chars): Likewise.
1023         * doc/c-d30v.texi (D30V-Chars): Likewise.
1024         * doc/c-mmix.texi (MMIX-Chars): Likewise.
1025         * doc/c-s390.texi (s390 characters): Likewise.
1026         * doc/c-sh.texi (SH-Chars): Likewise.
1027         * doc/c-sh64.texi (SH64-Chars): Likewise.
1028         * doc/c-sparc.texi (SPARC-Chars): Likewise.
1029         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
1030         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
1031         * doc/c-z80.texi (Z80-Chars): Likewise.
1032         * doc/c-z8k.texi (Z8000-Chars): Likewise.
1033         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
1034         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
1035         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
1036         line separator characters.
1037         * doc/c-cr16.texi (CR16 Syntax): Likewise.
1038         * doc/c-i386.texi (i386-Chars): Likewise.
1039         * doc/c-i860.texi (i860-Chars): Likewise.
1040         * doc/c-i960.texi (i960-Chars): Likewise.
1041         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
1042         * doc/c-lm32.texi (LM32-Chars): likewise.
1043         * doc/c-m32c.texi (M32C-Chars): Likewise.
1044         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
1045         * doc/c-m68k.texi (M68K-Chars): Likewise.
1046         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
1047         * doc/c-msp430.texi (MSP430-Chars): Likewise.
1048         * doc/c-mt.texi (MT-Chars): Likewise.
1049         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
1050         * doc/c-pj.texi (PJ-Chars): Likewise.
1051         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
1052         * doc/c-rx.texi (RX-Chars): Likewise.
1053         * doc/c-score.texi (SCORE-Chars): Likewise.
1054         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
1055         * doc/c-v850.texi (V850-Chars): Likewise.
1056         * doc/c-vax.texi (VAX-Chars): Likewise.
1057         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
1058
1059 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
1060
1061         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
1062
1063         * doc/c-i386.texi (i386-TBM): New section.
1064
1065 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
1066
1067         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
1068         (disallow_64bit_reloc): This.
1069         (md_assemble): Don't check movabs for x32 mode here.
1070         (i386_target_format): Updated.
1071         (tc_gen_reloc): Check if 64bit relocations are allowed.
1072
1073 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
1074
1075         * config/tc-i386.c (disallow_64bit_disp): New.
1076         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
1077         X86_64_ABI/X86_64_X32_ABI.
1078         (md_assemble): Don't allow movabs with relocation in x32 mode.
1079         (i386_target_format): Updated.
1080
1081 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
1082
1083         * config/tc-i386.c (OPTION_N32): Renamed to ...
1084         (OPTION_X32): This.
1085         (md_longopts): Replace n32 with x32.
1086         (md_parse_option): Updated.
1087         (md_show_usage): Likewise.
1088
1089         * doc/c-i386.texi: Replace --n32 with --x32.
1090
1091 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
1092
1093         * config/tc-mips.c (mips_ip): Update error messages.  Take an
1094         unadjusted offset for "+c" argument.
1095
1096 2011-01-10  Nick Clifton  <nickc@redhat.com>
1097
1098         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
1099         it.
1100
1101 2011-01-10  Nick Clifton  <nickc@redhat.com>
1102
1103         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
1104         part of the file.
1105
1106 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
1107             Glauber de Oliveira Costa  <glommer@gmail.com>
1108
1109         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
1110         .tlsdescseq directive.
1111         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
1112         following a symbol.
1113         (s_arm_tls_descseq): New directive.
1114         (md_pseudo_table): Add it.
1115         (encode_branch): Allow TLS_CALL relocs too.
1116         (do_t_blx, do_t_branch23): Use encode_branch.
1117         (reloc_names): Add tlsdesc and tlscall.
1118         (md_apply_fix): Process tls desc relocations.
1119         (tc_gen_reloc): Likewise.
1120         (arm_fix_adjustable): Likewise.
1121
1122 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
1123
1124         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
1125
1126         * doc/c-i386.texi (i386-BMI): New section.
1127
1128 2011-01-06  Paul Koning  <ni1d@arrl.net>
1129
1130         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
1131         references to absolute addresses.
1132
1133 2011-01-05  DJ Delorie  <dj@redhat.com>
1134
1135         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
1136         instead of an RH_NEG32 one.
1137
1138 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
1139
1140         * doc/c-i386.texi: Clarify --n32.
1141
1142 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1143
1144         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
1145         integer registers in VEX.vvvv.  Check register-only source
1146         operand when two source operands are swapped.  Properly update
1147         destination when two source operands are swapped.
1148
1149 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
1150
1151         * gas.c (parse_args): Update copyright to 2011.
1152
1153 For older changes see ChangeLog-2010
1154 \f
1155 Local Variables:
1156 mode: change-log
1157 left-margin: 8
1158 fill-column: 74
1159 version-control: never
1160 End: