gas/ChangeLog

   1 2007-10-16  Bob Wilson  <bob.wilson@acm.org>
   2
   3         * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
   4
   5 2007-10-16  Nick Clifton  <nickc@redhat.com>
   6
   7         * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
   8         symbol type.
   9         * doc/as.texinfo (.type): Document the types accepted by the
  10         type pseudo op, including "common".
  11
  12 2007-10-15  Peter Bergner  <bergner@vnet.ibm.com>
  13
  14         * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
  15         according to major opcode number.
  16
  17 2007-10-15  Alan Modra  <amodra@bigpond.net.au>
  18
  19         * read.c (do_s_func): Check asprintf return status.
  20         * stabs.c (stabs_generate_asm_func): Likewise.
  21         (stabs_generate_asm_endfunc): Likewise.
  22
  23 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
  24
  25         * config/tc-i386.c (process_operands): Simplify implicit xmm0
  26         handling.
  27
  28 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
  29
  30         * config/tc-i386.c (process_operands): Check the firstxmm0
  31         field in opcode_modifier for instruction with a implicit
  32         xmm0 as the first operand.
  33
  34 2007-10-12  Eric B. Weddington  <eweddington@cso.atmel.com>
  35
  36         * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
  37         AT90PWM3B.
  38         * doc/c-avr.texi: Document new devices.
  39
  40 2007-10-12  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
  41
  42         * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
  43         instruction range information.
  44
  45 2007-10-12  Daniel Jacobowitz  <dan@codesourcery.com>
  46
  47         * doc/as.texinfo (Object Attributes): New chapter.
  48         (Pseudo Ops): Document .gnu_attribute.
  49         (LNS directives): Correct .loc_mark_labels documentation.
  50
  51 2007-10-11  Nick Clifton  <nickc@redhat.com>
  52
  53         * config/obj-elf.c (obj_elf_section): When pushing a section, if
  54         there is a comma then the following argument must be a subsection
  55         number.
  56
  57 2007-10-11  H.J. Lu  <hongjiu.lu@intel.com>
  58
  59         * doc/c-i386.texi: Update which instruction's operands are
  60         swapped.
  61
  62 2007-10-11  Nick Clifton  <nickc@redhat.com>
  63
  64         PR gas/5161
  65         * config/tc-ia64.c: Allow for translations of error and warning
  66         messages.
  67         * po/gas.pot: Regenerate.
  68
  69         PR gas/5158
  70         * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
  71         message.
  72         * po/gas.pot: Regenerate.
  73
  74         PR gas/5155
  75         * config/tc-msp430.c: Fix spelling typos.
  76
  77 2007-10-11  Nick Clifton  <nickc@redhat.com>
  78
  79         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
  80
  81 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
  82
  83         * config/tc-mips.c (AT): Rename to...
  84         (ATREG): ... this.
  85         (AT): New definition.
  86         (mips_set_options): Rename "noat" to "at"; change the type.
  87         (mips_opts): Update accordingly.
  88         (append_insn): Likewise.
  89         (macro_build_ldst_constoffset): Likewise.
  90         (load_address): Likewise.
  91         (macro, macro2): Likewise.
  92         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  93         and ".set noat".
  94
  95 2007-10-08  Nick Clifton  <nickc@redhat.com>
  96
  97         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  98         of this pseudo-op and add a couple of examples.
  99
 100 2007-10-08  Nick Clifton  <nickc@redhat.com>
 101
 102         PR gas/5121 gas/5122 gas/5123
 103         * Makefile.am (CFILES): Add cgen.c
 104         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
 105         tc-tic4x.c and xtensa-relax.c.
 106         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
 107         tc-tic4x.h and xtensa-relax.h.
 108         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
 109         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
 110         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
 111         (CONFIG_ATOF_CFILES): New variable.
 112         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
 113         dependency upon TARG_ENV_HFILES.
 114         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
 115         cgen-desc.h when foo-desc.h does not exit.
 116         Run make dep-am.
 117         * Makefile.in: Regenerate.
 118         * doc/Makefile.in: Regenerate.
 119         * po/POTFILES.in: Regenerate.
 120         PR gas/5124 gas/5125
 121         * po/es.po: Regenerate.
 122         * po/fr.po: Regenerate.
 123         * po/gas.pot: Regenerate.
 124         * po/rw.po: Regenerate.
 125         * po/tr.po: Regenerate.
 126         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
 127         of error messages.
 128         PR gas/5126
 129         * config/obj-som.c: Likewise.
 130         PR gas/5129
 131         * config/tc-arc.c: Likewise.
 132         PR gas/5131 gas/5132
 133         * config/tc-arm.c: Likewise.
 134         PR gas/5137
 135         * config/tc-bfin.c: Likewise.
 136         PR gas/5143
 137         * config/tc-frv.c: Likewise.
 138         PR gas/5142
 139         * config/tc-dlx.c: Likewise.
 140
 141 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
 142
 143         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
 144         ATtiny48, AT90PWM216, AT90PWM316.
 145         * doc/c-avr.texi: Document new devices.
 146
 147 2007-10-08  Nick Clifton  <nickc@redhat.com>
 148
 149         PR gas/5133
 150         * config/tc-arm.c (md_apply_fix): Correct error message.
 151         PR gas/5134
 152         * config/tc-arm.c (md_apply_fix): Likewise.
 153         PR gas/5136
 154         * config/tc-bfin.c (md_apply_fix): Fix error message.
 155         PR gas/5135
 156         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
 157
 158 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
 159
 160         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
 161         immediate operands directly for instructions with 4 operands.
 162
 163 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
 164
 165         PR gas/5109
 166         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
 167         is ignored in Intel mode.
 168
 169 2007-10-04  Helge Deller  <deller@gmx.de>
 170
 171         * read.c (potable): Add string8, string16, string32 and string64.
 172         Add bit size for stringer function.
 173         (stringer_append_char): New.
 174         (stringer): Use stringer_append_char().
 175         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 176         * config/obj-elf.c (obj_elf_ident): Likewise.
 177         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 178         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 179         * config/tc-hppa.c (pa_stringer): Likewise.
 180         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 181         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 182         * config/tc-mcore.c (md_pseudo_table): Likewise.
 183         * config/tc-mips.c (mips_pseudo_table): Likewise.
 184         * config/tc-spu.c (md_pseudo_table): Likewise.
 185         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 186         * doc/as.texinfo (ABORT): Fix identing.
 187         (String): Document new string8, string16, string32, string64
 188         functions.
 189         * NEWS: Mention the new feature.
 190
 191 2007-10-03  Nick Clifton  <nickc@redhat.com>
 192
 193         PR gas/5078
 194         * config/tc-avr.c (avr_get_constant): Extend error message to
 195         mention that the constant must be positive.
 196
 197 2007-10-03  Nick Clifton  <nickc@redhat.com>
 198
 199         * config/tc-avr.c (avr_get_constant):
 200         PR gas/5089
 201         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 202         PR gas/5090
 203         (md_assemble): Fix spelling typo.
 204
 205 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 206
 207         PR 4303
 208         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 209
 210 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 211
 212         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 213         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 214
 215 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 216
 217         PR gas/5080
 218         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 219         (check_qword_reg): Also handle cvttsd2si.
 220
 221 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 222
 223         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 224         (last_movec_reg): Change to MBO.
 225         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 226         (m68k_ip): Use MBO instead of MBO.
 227         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 228
 229 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 230
 231         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 232         when considering IP-relative addressing.
 233
 234 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 235
 236         * config/tc-i386.h (md_register_arithmetic): Define.
 237         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 238         * doc/internals.texi: Document md_register_arithmetic.
 239         * expr.c (make_expr_symbol): Force O_register expressions into
 240         reg_section.
 241         (expr): Provide default for md_register_arithmetic. Don't resolve
 242         adding/subtracting constants to/from registers if
 243         md_register_arithmetic is zero.
 244
 245 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 246
 247         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 248         (cfi_finish): Add second empty instance.
 249
 250 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 251
 252         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 253         with simple call to parse_operand.
 254
 255 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 256
 257         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 258
 259 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 260
 261         * as.c (itbl_parse): Remove #define.
 262         (struct itbl_file_list): Move down and ...
 263         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 264         (show_usage): Conditionalize printing of --itbl option upon
 265         HAVE_ITBL_CPU.
 266         (parse_args): Conditionalize handling of -t/--itbl options upon
 267         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 268         't'.
 269
 270 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 271
 272         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 273         check opcode length.
 274
 275 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 276
 277         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 278         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 279         (md_relax_table): Add BRANCHBWPL entries.
 280         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 281         (md_assemble): Use FRAG_VAR_SIZE.
 282         (md_convert_frag_1): Add BRANCHBWPL cases.
 283         (md_estimate_size_before_relaz): Likewise.
 284
 285 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 286
 287         * config/tc-mips.c (s_align): Set max_alignment to 28.
 288
 289 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 290
 291         PR 658
 292         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 293         (set_allow_index_reg): New.
 294         (allow_index_reg): Likewise.
 295         (md_pseudo_table): Add "allow_index_reg" and
 296         "disallow_index_reg".
 297         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 298         fake index registers.
 299         (i386_scale): Updated.
 300         (i386_index_check): Support fake index registers.
 301         (parse_real_register): Return NULL on eiz/riz if fake index
 302         registers aren't allowed.
 303
 304 2007-09-19  Nick Clifton  <nickc@redhat.com>
 305
 306         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 307         fixups.
 308
 309 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 310
 311         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 312
 313 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 314
 315         * config/bfin-parse.y (asm_1): Slightly improve error messages
 316         for "reg += const;".
 317
 318 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 319
 320         PR gas/5026
 321         * read.c (emit_expr): Only use long long if required and available.
 322
 323 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 324
 325         * config/tc-i386.c (baseindex): Removed.
 326         (build_modrm_byte): Check reg_num for RIP register instead of
 327         reg_type.
 328         (i386_index_check): Likewise.
 329
 330 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 331
 332         PR gas/5035
 333         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 334         def_symbol_in_progress.
 335
 336 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 337
 338         PR gas/5026
 339         * read.c (emit_expr): Use unsigned long long values in warning
 340         message about truncated expressions.
 341
 342 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 343
 344         * config/tc-i386.c (intel_e04): Revert the last change.
 345
 346 2007-09-17  Nick Clifton  <nickc@redhat.com>
 347
 348         * po/es.po: Updated Spanish translation.
 349
 350 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 351
 352         PR gas/5034
 353         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 354         T_NIL.
 355
 356 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 357
 358         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 359         wrap.
 360
 361 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 362
 363         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 364         of (A || B) != 0.
 365
 366 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 367
 368         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 369
 370 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 371             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 372             Tony Linthicum  <tony.linthicum@amd.com>
 373
 374         * NEWS: Add SSE5 support to NEWS file.
 375
 376         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 377         and build_modrm_byte to communicate.
 378         (DREX_OC0): New SSE5 macro.
 379         (DREX_OC0_MASK): Ditto.
 380         (DREX_OC1): Ditto.
 381         (DREX_OC1_MASK): Ditto.
 382         (DREX_XMEM_X1_X2_X2): Ditto.
 383         (DREX_X1_XMEM_X2_X2): Ditto.
 384         (DREX_X1_XMEM_X2_X1: Ditto.
 385         (DREX_X1_X2_XMEM_X1: Ditto.
 386         (DREX_XMEM_X1_X2): Ditto.
 387         (DREX_X1_XMEM_X2): Ditto.
 388         (drex_byte): New structure to describe the DREX byte.
 389
 390         * config/tc-i386.c (process_drex): New function to handle SSE5
 391         DREX bits.
 392         (build_modrm_byte): Use the information cached away in
 393         process_drex in the case of DREX instructions.
 394         (i386_insn): Add drex field.
 395         (pi): Add debugging of drex field.
 396         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 397         immediate byte.  Move REX field to DREX if this is a DREX
 398         instruction.
 399         (process_operands): Add SSE5 support.
 400         (build_modrm_byte): Ditto.
 401         (output_insn): Ditto.
 402         (cpu_arch): Ditto.
 403         (i386_align_code): Ditto.
 404
 405 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 406
 407         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 408         after generic operand swapping, and swap only the immediate operands.
 409
 410 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 411
 412         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 413         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 414
 415 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 416
 417         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 418         byte opcode.
 419
 420 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 421
 422         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 423         (cpu_flags_check_cpu64): This. Inline.
 424         (uints_all_zero): New.
 425         (uints_set): Likewise
 426         (uints_equal): Likewise
 427         (UINTS_ALL_ZERO): Likewise
 428         (UINTS_SET): Likewise
 429         (UINTS_CLEAR): Likewise
 430         (UINTS_EQUAL): Likewise
 431         (cpu_flags_and): Likewise.
 432         (cpu_flags_or): Likewise.
 433         (operand_type_and): Likewise.
 434         (operand_type_or): Likewise.
 435         (operand_type_xor): Likewise.
 436         (cpu_flags_not): Inline and use switch instead of loop.
 437         (cpu_flags_match): Updated.
 438         (operand_type_match): Likewise.
 439         (smallest_imm_type): Likewise.
 440         (set_cpu_arch): Likewise.
 441         (pt): Likewise.
 442         (md_assemble): Likewise.
 443         (parse_insn): Likewise.
 444         (optimize_imm): Likewise.
 445         (match_template): Likewise.
 446         (process_suffix): Likewise.
 447         (update_imm): Likewise.
 448         (finalize_imm): Likewise.
 449         (process_operands): Likewise.
 450         (build_modrm_byte): Likewise.
 451         (i386_immediate): Likewise.
 452         (i386_displacement): Likewise.
 453         (i386_index_check): Likewise.
 454         (i386_operand): Likewise.
 455         (i386_target_format): Likewise.
 456         (intel_e11): Likewise.
 457         (operand_type): Remove implicitregister.
 458         (operand_type_check): Updated. Inline.
 459         (cpu_flags_all_zero): Removed.
 460         (operand_type_all_zero): Likewise.
 461         (i386_array_biop): Likewise.
 462         (cpu_flags_biop): Likewise.
 463         (operand_type_biop): Likewise.
 464
 465 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 466
 467         * Makefile.am: Run "make dep-am".
 468         * Makefile.in: Regenerate.
 469
 470 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 471
 472         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 473         * configure: Regenerated.
 474         * config.in: Likewise.
 475
 476         * config/tc-i386.c: Include "opcodes/i386-init.h".
 477         (_i386_insn): Use i386_operand_type for types.
 478         (cpu_arch_flags): Updated to new types with bitfield.
 479         (cpu_arch_tune_flags): Likewise.
 480         (cpu_arch_isa_flags): Likewise.
 481         (cpu_arch): Likewise.
 482         (i386_align_code): Likewise.
 483         (set_code_flag): Likewise.
 484         (set_16bit_gcc_code_flag): Likewise.
 485         (set_cpu_arch): Likewise.
 486         (md_assemble): Likewise.
 487         (parse_insn): Likewise.
 488         (process_operands): Likewise.
 489         (output_branch): Likewise.
 490         (output_jump): Likewise.
 491         (parse_real_register): Likewise.
 492         (mode_from_disp_size): Likewise.
 493         (smallest_imm_type): Likewise.
 494         (pi): Likewise.
 495         (type_names): Likewise.
 496         (pt): Likewise.
 497         (pte): Likewise.
 498         (swap_2_operands): Likewise.
 499         (optimize_imm): Likewise.
 500         (optimize_disp): Likewise.
 501         (match_template): Likewise.
 502         (check_string): Likewise.
 503         (process_suffix): Likewise.
 504         (check_byte_reg): Likewise.
 505         (check_long_reg): Likewise.
 506         (check_qword_reg): Likewise.
 507         (check_word_reg): Likewise.
 508         (finalize_imm): Likewise.
 509         (build_modrm_byte): Likewise.
 510         (output_insn): Likewise.
 511         (disp_size): Likewise.
 512         (imm_size): Likewise.
 513         (output_disp): Likewise.
 514         (output_imm): Likewise.
 515         (gotrel): Likewise.
 516         (i386_immediate): Likewise.
 517         (i386_displacement): Likewise.
 518         (i386_index_check): Likewise.
 519         (i386_operand): Likewise.
 520         (parse_real_register): Likewise.
 521         (i386_intel_operand): Likewise.
 522         (intel_e09): Likewise.
 523         (intel_bracket_expr): Likewise.
 524         (intel_e11): Likewise.
 525         (cpu_arch_flags_not): New.
 526         (cpu_flags_check_x64): Likewise.
 527         (cpu_flags_all_zero): Likewise.
 528         (cpu_flags_not): Likewise.
 529         (i386_cpu_flags_biop): Likewise.
 530         (cpu_flags_biop): Likewise.
 531         (cpu_flags_match); Likewise.
 532         (acc32): New.
 533         (acc64): Likewise.
 534         (control): Likewise.
 535         (reg16_inoutportreg): Likewise.
 536         (disp16): Likewise.
 537         (disp32): Likewise.
 538         (disp32s): Likewise.
 539         (disp16_32): Likewise.
 540         (anydisp): Likewise.
 541         (baseindex): Likewise.
 542         (regxmm): Likewise.
 543         (imm8): Likewise.
 544         (imm8s): Likewise.
 545         (imm16): Likewise.
 546         (imm32): Likewise.
 547         (imm32s): Likewise.
 548         (imm64): Likewise.
 549         (imm16_32): Likewise.
 550         (imm16_32s): Likewise.
 551         (imm16_32_32s): Likewise.
 552         (operand_type): Likewise.
 553         (operand_type_check): Likewise.
 554         (operand_type_match): Likewise.
 555         (operand_type_register_match): Likewise.
 556         (update_imm): Likewise.
 557         (set_code_flag): Also update cpu_arch_flags_not.
 558         (set_16bit_gcc_code_flag): Likewise.
 559         (md_begin): Likewise.
 560         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 561         Use cpu_flags_match to match instructions.
 562         (i386_target_format): Update cpu_arch_isa_flags and
 563         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 564         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 565         (match_template): Don't initialize overlap0, overlap1,
 566         overlap2, overlap3 and operand_types.
 567         (process_suffix): Handle crc32 with 64bit register.
 568         (MATCH): Removed.
 569         (CONSISTENT_REGISTER_MATCH): Likewise.
 570
 571         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 572         type.
 573
 574 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 575
 576         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 577         vmrun and vmsave in SVME.
 578         (process_suffix): Likewise.
 579
 580 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 581
 582         * config/tc-i386.c (i386_index_check): Don't use RegRex
 583         on the reg_type field.
 584         (parse_real_register): Use `||' instead of `|'.
 585
 586 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 587
 588         * config/tc-i386.c (process_operands): Remove segment override
 589         check on SVME instructions.
 590         (i386_index_check): Remove memory operand check on SVME
 591         instructions.
 592
 593 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 594
 595         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 596         (md_assemble): Update init of insn.  Use insn.reloc instead of
 597         calculating from flag.
 598         (get_imm): Set reloc rather than flag.
 599         (calcop): Formatting.
 600
 601 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 602
 603         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 604
 605 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 606
 607         * doc/c-arc.texi: Fix typo.
 608
 609 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 610
 611         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 612         Intel mode.
 613
 614 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 615
 616         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 617         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 618         (mcf5407_ctrl): New.
 619         (m68k_cpus): Adjust 5407 entry.
 620
 621 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 622
 623         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 624         (m68k_cpus): Define 51QE cpu.
 625
 626 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 627             Joseph Myers  <joseph@codesourcery.com>
 628
 629         * as.c (main): Flush stderr before printing listings to ensure
 630         consistent output order across platforms.
 631
 632 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 633
 634         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 635
 636 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 637             Paul Brook  <paul@codesourcery.com>
 638
 639         * remap.c: New.
 640         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 641         * as.c (show_usage): Document --debug-prefix-map option.
 642         (parse_args): Handle --debug-prefix-map.
 643         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 644         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 645         * Makefile.am (GAS_CFILES): Add remap.c
 646         (GENERIC_OBJS): Add remap.o.
 647         Regenerate dependencies.
 648         * Makefile.in: Regenerate.
 649         * doc/as.texinfo (--debug-prefix-map): Document.
 650
 651 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 652
 653         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 654         before printing them.
 655
 656 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 657             Alan Modra  <amodra@bigpond.net.au>
 658
 659         * config/tc-i386.c (lex_got): Don't scan past a comma.
 660
 661 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 662
 663         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 664         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 665         (md_show_usage): Document -m750cl.
 666         (md_assemble): Handle two delimiters in succession (eg. `),').
 667         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 668         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 669         * testsuite/gas/ppc/ppc750ps.s: New file.
 670         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 671
 672 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 673
 674         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 675
 676 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 677
 678         PR gas/4079
 679         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 680         expressions.
 681         (i386_immediate): Detect and complain about more cases of
 682         invalid immediate expressions.  Return failure rather than
 683         converting them to zero.
 684         (i386_displacement): Likewise.
 685
 686 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 687
 688         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 689
 690 2007-08-14  Andreas Schwab  <schwab@suse.de>
 691
 692         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 693         unrepresentable.
 694
 695 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 696
 697         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 698         $(top_srcdir)/../../bfd/doc.
 699         * doc/Makefile.in: Regenerate.
 700
 701 2007-08-10  Nick Clifton  <nickc@redhat.com>
 702
 703         * NEWS: Add a marker for the 2.18 features.
 704
 705 2007-08-09  Paul Brook  <paul@codesourcery.com>
 706
 707         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 708
 709 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 710
 711         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 712
 713 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 714
 715         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 716         DWORD memory to Reg64 in Intel synax.
 717         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 718         Reg32 in Intel syntax.
 719
 720 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 721
 722         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 723         (xg_expand_assembly_insn): Check for invalid extui operands.
 724         (md_begin): Initialize xtensa_extui_opcode.
 725
 726 2007-07-24  Nick Clifton  <nickc@redhat.com>
 727
 728         * config/tc-mep.h (skip_whitespace): Remove definition.
 729
 730 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 731
 732         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 733         (f32_15): Removed.
 734         (jump_31): New.
 735         (f32_patt): Remove f32_15.
 736         (f16_patt): Likewise.
 737         (i386_align_code): Updated to alt_long_patt for 64bit by
 738         default.
 739
 740         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 741
 742 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 743
 744         * config/tc-i386.c (i386_align_code): Enable alignment up to
 745         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 746         for K8.
 747
 748         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 749
 750 2007-07-20  Nick Clifton  <nickc@redhat.com>
 751
 752         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 753         pushed back newline at the end of an unterminated quoted string.
 754
 755 2007-07-14  Nick Clifton  <nickc@redhat.com>
 756
 757         * config/tc-arm.c (create_register_alias): Return a boolean rather
 758         than an integer.
 759         Check the return value of insert_reg_alias and do not continue to
 760         create aliases once an insertion has failed.
 761         (s_unreq): Delete the all-upper-case and all-lower-case
 762         alternatives as well.
 763
 764 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 765
 766         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 767         * write.c: Likewise.
 768
 769 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 770
 771         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 772         HAVE_64BIT_SYMBOLS.
 773
 774 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 775
 776         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 777         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 778         Deprecate *x and *fx.
 779         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 780         *x and *fx.
 781
 782 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 783
 784         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 785         (i386_target_format): This
 786         (TARGET_FORMAT): Use i386_target_format.
 787
 788         * config/tc-i386.c (x86_64_target_format): Removed.
 789         (i386_target_format): Handle PE formats.
 790
 791 2007-07-04  Nick Clifton  <nickc@redhat.com>
 792
 793         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 794         to get the right length of printed value.
 795
 796 2007-07-03  Nick Clifton  <nickc@redhat.com>
 797
 798         * COPYING: Replace with GPLv3 text.
 799         * app.c: Update copyright notice to refer to GPLv3.
 800         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 801         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 802         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 803         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 804         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 805         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 806         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 807         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 808         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 809         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 810         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 811         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 812         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 813         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 814         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 815         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 816         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 817         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 818         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 819         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 820         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 821         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 822         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 823         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 824         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 825         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 826         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 827         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 828         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 829         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 830         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 831         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 832         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 833         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 834         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 835         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 836         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 837         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 838         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 839         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 840         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 841         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 842         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 843         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 844         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 845         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 846         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 847         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 848         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 849         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 850         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 851         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 852         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 853         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 854         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 855         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 856         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 857         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 858         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 859         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 860
 861         * flonum-mult.c: Likewise, and also correct typo referring to
 862         non-existant GNU Assembler General Public License.
 863         * config/tc-m68851.h: Likewise.
 864         * NEWS: Mention the new license.  Also note where the 2.17 release
 865         happened.
 866         * config/e-crisaout.c: Add copyright header.
 867         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 868         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 869         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 870         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 871         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 872         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 873         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 874         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 875         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 876         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 877         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 878         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 879         config/te-wince-pe.h: Likewise.
 880
 881 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 882
 883         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 884         (install_operand): Add E encoding.
 885         (md_begin): Check and skip initial '.' arg character.
 886         (get_num): Add 0..511 case.
 887
 888 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 889
 890         PR 4713
 891         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 892         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 893
 894 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 895
 896         PR 4722
 897         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 898         after memcpy.
 899
 900 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 901
 902         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 903         s_dtprel_internal): New.
 904         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 905         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 906         BFD_RELOC_MIPS_TLS_DTPREL64.
 907
 908 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 909
 910         * Makefile.am: Run "make dep-am".
 911         * Makefile.in: Regenerate.
 912         * aclocal.m4: Regenerate.
 913         * config.in: Regenerate.
 914         * doc/Makefile.in: Regenerate.
 915         * po/POTFILES.in: Regenerate.
 916         * po/gas.pot: Regenerate.
 917
 918 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 919
 920         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 921         coff section flag values to bfd section flag.
 922
 923 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 924
 925         * aclocal.m4: Regenerated.
 926         * doc/Makefile.in: Likewise.
 927         * Makefile.in: Likewise.
 928
 929 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 930
 931         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 932
 933 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 934
 935         * as.c (create_obj_attrs_section): New.
 936         (main): Call create_obj_attrs_section for ELF.
 937         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 938         skip_past_comma, s_vendor_attribute): New.
 939         (potable): Add gnu_attribute for ELF.
 940         * read.h (s_vendor_attribute): Declare.
 941         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 942         round s_vendor_attribute.
 943         (aeabi_set_public_attributes): Update for new attributes
 944         interfaces.
 945         (arm_md_end): Remove attributes contents setting now done
 946         generically.
 947
 948 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 949
 950         * Makefile.am: Add CR16 related entry.
 951         * Makefile.in: Regenerate.
 952         * config/tc-cr16.h: New file
 953         * config/tc-cr16.c: New file
 954         * doc/c-cr16.texi: New file for cr16
 955         * doc/all.texi: Entry for cr16
 956         * doc/Makefile.am: Added c-cr16.texi
 957         * doc/Makefile.in: Regenerate
 958         * doc/as.texinfo: Entry for CR16 target
 959         * NEWS: Announce the support for the new target.
 960
 961 2007-06-26  Paul Brook  <paul@codesourcery.com>
 962
 963         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 964         for OP_RVC.
 965         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 966
 967 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 968
 969         * config/tc-i386.c (process_operands): Replace regKludge
 970         with RegKludge.
 971
 972 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 973
 974         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 975         * config/tc-mips.c (append_insn): Record which symbols have
 976         R_MIPS16_26 relocations against them.
 977         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 978
 979 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 980
 981         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 982         (frag_format_size): Handle RELAX_IMMED_STEP3.
 983         (xtensa_relax_frag, md_convert_frag): Likewise.
 984         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 985         (RELAX_IMMED_MAXSTEPS): Adjust.
 986         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 987         wide branches to branch-over-jumps.
 988         (build_transition): Handle wide branches in transition patterns.
 989
 990 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 991
 992         * config/tc-i386.c (disp_size): New.
 993         (imm_size): Likewise.
 994         (output_disp): Use disp_size and imm_size.
 995         (output_imm): Use imm_size.
 996
 997 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 998
 999         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1000         use of literal_frag field.
1001         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1002         in the literal_frag field.
1003         (xtensa_move_literals): Use it here instead of searching.  Update
1004         literal_frag field with new value.
1005
1006 2007-06-14  Paul Brook  <paul@codesourcery.com>
1007
1008         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1009         narrow shift by immediate.
1010
1011 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
1012
1013         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1014
1015         * acinclude.m4: Don't include m4 files.
1016         (BFD_BINARY_FOPEN): Removed.
1017         Remove libtool kludge.
1018
1019         * Makefile.in: Regenerated.
1020         * doc/Makefile.in: Likewise.
1021         * aclocal.m4: Likewise.
1022         * configure: Likewise.
1023
1024 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
1025             Bob Wilson  <bob.wilson@acm.org>
1026
1027         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1028         (XTENSA_PROP_NO_TRANSFORM): ...this.
1029         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1030         (xtensa_mark_frags_for_org): New.
1031         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1032         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1033         (get_frag_property_flags): Adjust reference to is_no_transform flag.
1034         (xtensa_frag_flags_combinable): Likewise.
1035         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
1036         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1037
1038 2007-06-06  Paul Brook  <paul@codesourcery.com>
1039
1040         * config/tc-arm.c (s_align): Pad code sections appropriately.
1041
1042 2007-06-05  Paul Brook  <paul@codesourcery.com>
1043
1044         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1045
1046 2007-06-05  Nick Clifton  <nickc@redhat.com>
1047
1048         PR gas/4587
1049         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1050
1051 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
1052
1053         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
1054         number@ppu.
1055         (tc_gen_reloc): Abort if neither addsy or subsy is set.
1056         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1057         * config/tc-spu.h (md_operand): Handle @ppu without sym.
1058
1059 2007-05-31  Paul Brook  <paul@codesourcery.com>
1060
1061         * config/tc-arm.c (insns): Allow strex on M profile cores.
1062
1063 2007-05-29  David S. Miller  <davem@davemloft.net>
1064             Jakub Jelinek  <jakub@redhat.com>
1065
1066         PR gas/4558
1067         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1068         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1069
1070 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1071
1072         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1073
1074 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1075
1076         * config/tc-ppc.c: Convert to ISO C.
1077         * config/tc-ppc.c: Likewise.
1078
1079 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1080
1081         * write.h (EXEC_MACHINE_TYPE): Delete.
1082         (string_byte_count, section_alignment): Delete.
1083
1084 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1085
1086         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1087
1088 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1089
1090         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1091         top 32 bits of 64 bit value if so doing results in passing
1092         range check.  Rewrite sign extension fudges similarly.  Enable
1093         fudges for powerpc64 too.  Report user value if range check
1094         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1095         range rather than value, also to report user value on failure.
1096
1097 2007-03-25  Paul Brook  <paul@codesourcery.com>
1098
1099         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1100         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1101         (do_t_mov_cmp): Correctly encode movs pc, lr.
1102
1103 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1104
1105         * Makefile.in: Regnerate.
1106         * configure: Regenerate.
1107         * aclocal.m4: Regenerate.
1108         * doc/Makefile.in: Regenerate.
1109
1110 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1111
1112         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1113         and index entries about automatic alignment of ENTRY instructions.
1114
1115 2007-05-22  Nick Clifton  <nickc@redhat.com>
1116
1117         * doc/as.texinfo: Use @copying around the copyright notice.
1118
1119 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1120
1121         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1122         containing a comma.
1123
1124 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1125
1126         PR gas/4517
1127         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1128         * doc/as.texinfo: Document new directives: .cfi_restore,
1129         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1130         .cfi_remember_state and .cfi_restore_state.
1131
1132 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1133
1134         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1135         fixups in error message.
1136         (md_conver_frag_1): Propagate the fix source location and use
1137         as_bad_where rather than fatal, for better error messages.
1138
1139 2007-05-16  Paul Brook  <paul@codesourcery.com>
1140
1141         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1142
1143 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1144
1145         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1146
1147 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1148
1149         PR gas/3041
1150         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1151         addend is stored for relocs against weak symbols.
1152         (md_apply_fix): So not loose track of addend for relocs against
1153         weak symbols.
1154
1155 2007-05-14  Thiemo Seufer  <ths@mips.com>
1156
1157         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1158
1159 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1160
1161         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1162         addri, addri.c, subi, and subi.c when immediate number is hex.
1163         (score_insns): Remove subis and subis.c.
1164         (do_sub_rdi16): Delete.
1165
1166 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1167
1168         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1169         spu_cons for word.
1170         (md_assemble): Tidy use of insn.flag.
1171         (get_imm): Likewise.  Handle uppercase input too.
1172         (spu_cons): New function.
1173         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1174         (TC_FORCE_RELOCATION): Don't resolve them either.
1175
1176 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1177
1178         * config/tc-arm.c (md_apply_fix): Generate more accurate
1179         diagnostic when 8-bit immediate range is exceeded for
1180         BFD_RELOC_ARM_OFFSET_IMM8.
1181
1182 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1183
1184         PR gas/4460
1185         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1186         a space if we already have a space.
1187
1188 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1189
1190         * config/tc-i386.c (match_template): Don't explicitly check
1191         suffix for crc32 in Intel mode.
1192         (process_suffix): Issue an error for crc32 if the operand size
1193         is ambiguous.
1194
1195 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1196             Nick Clifton  <nickc@redhat.com>
1197
1198         PR gas/3041
1199         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1200         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1201         (md_apply_fix): Put zero values into the frags referencing weak
1202         symbols.
1203
1204 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1205
1206         PR 4448
1207         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1208         PPC_OPERAND_PLUS1.
1209
1210 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1211
1212         * config/tc-i386.c (match_template): Check suffix for crc32 in
1213         Intel mdoe.
1214         (process_suffix): Default the suffix of 8bit crc32 to
1215         BYTE_MNEM_SUFFIX.
1216         (check_byte_reg): Skip check for 8bit crc32.
1217
1218 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1219
1220         * config/tc-i386.c (md_assemble): Use register_prefix in
1221         error/warning message.
1222         (check_byte_reg): Likewise.
1223         (check_long_reg): Likewise.
1224         (check_qword_reg): Likewise.
1225         (check_word_reg): Likewise.
1226         (process_operands): Likewise.
1227
1228 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1229
1230         PR 4436
1231         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1232         min > max.
1233
1234 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1235
1236         * config/tc-mips.c: Fix comment.
1237
1238 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1239
1240         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1241         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1242         * doc/c-avr.texi: Document new devices.
1243
1244 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1245
1246         * Makefile.am: Run "make dep-am".
1247         * Makefile.in: Regenerate.
1248
1249 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1250
1251         * config/tc-m68k.c (mcf54455_ctrl): New.
1252         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1253         (m68k_archs): Add isac.
1254         (m68k_cpus): Add 54455 family.
1255         (m68k_ip): Split Bg into Bb, Bs, Bg.
1256         (m68k_elf_final_processing): Add ISA_C.
1257         * doc/c-m68k.texi (M680x0 Options): Add isac.
1258
1259 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1260
1261         * read.c (read_a_source_file): Skip multiple spaces to
1262         cover hack in mmix md_start_line_hook which overwrites a
1263         colon with a space.  Delete sermon and needless assertion.
1264
1265 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1266
1267         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1268         (md_atof): Make number_of_chars unsigned.  Revert last change.
1269         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1270         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1271         * config/tc-sh.h (md_optimize_expr): Likewise.
1272         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1273         assertion.
1274         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1275
1276 2007-04-21  Nick Clifton  <nickc@redhat.com>
1277
1278         * config/atof-vax.c (md_atof): Fix comparison inside know().
1279
1280         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1281
1282 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1283
1284         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1285         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1286         Don't skip over NUL char.
1287         (pseudo_set): Set X_op for registers to O_register.
1288         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1289         (resolve_symbol_value): Resolve O_register symbols.
1290         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1291         Instead find st(0) by hash lookup.
1292         * config/tc-ppc.c (ppc_macro): Warning fix.
1293
1294         * as.h (ENABLE_CHECKING): Default define to 0.
1295         (know): Assert if ENABLE_CHECKING.
1296         (struct relax_type): Remove superfluous declaration.
1297         * configure.in (--enable-checking): New.
1298         * configure: Regenerate.
1299         * config.in: Regenerate.
1300         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1301         Check for duplicate powerpc_operands entries.
1302
1303 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1304
1305         * config/tc-m68k.c (mcf5253_ctrl): New.
1306         (mcf52223_ctrl): New.
1307         (m68k_cpus): Add 5253, 52221, 52223.
1308
1309         * config/m68k-parse.h (RAMBAR_ALT): New.
1310         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1311         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1312         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1313         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1314         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1315         RAMBAR1.
1316         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1317         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1318         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1319         to control register mapping.
1320
1321 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1322
1323         * messages.c (as_internal_value_out_of_range): Fix typo in
1324         error message.  Return after printing domain error.
1325         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1326         in max when shifting right.
1327
1328 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1329
1330         * messages.c (as_internal_value_out_of_range): Extend to report
1331         errors for values with invalid low bits set.
1332         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1333         fields.  Check that operands and opcode fields are disjoint.
1334         (ppc_insert_operand): Check operands using mask rather than bit
1335         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1336         insertion code.
1337         (md_apply_fix): Adjust for struct powerpc_operand change.
1338
1339 2007-04-19  Paul Brook  <paul@codesourcery.com>
1340
1341         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1342         Thumb-1.  Add sanity check for bogus relaxations.
1343
1344 2007-04-19  Paul Brook  <paul@codesourcery.com>
1345
1346         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1347
1348 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1349
1350         * Makefile.am: Run "make dep-am".
1351         * Makefile.in: Regenerate.
1352
1353 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1354
1355         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1356
1357 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1358
1359         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1360
1361 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1362
1363         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1364         (match_template): Handle operand size for crc32 in SSE4.2.
1365         (process_suffix): Handle operand type for crc32 in SSE4.2.
1366         (output_insn): Support SSE4.2.
1367
1368 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1369
1370         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1371         (process_operands): Adjust implicit operand for blendvpd,
1372         blendvps and pblendvb in SSE4.1.
1373         (output_insn): Support SSE4.1.
1374
1375 2007-04-18  Paul Brook  <paul@codesourcery.com>
1376
1377         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1378
1379 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1380
1381         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1382         of as_warn_where for misaligned data.
1383
1384 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1385
1386         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1387         rs_fill frags.
1388
1389 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1390
1391         * Makefile.am: Add ACLOCAL_AMFLAGS.
1392         * Makefile.in: Regenerate.
1393
1394 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1395
1396         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1397         (sh_optimize_expr): Likewise.
1398         * config/tc-sh.h (md_optimize_expr): Define.
1399         (sh_optimize_expr): Prototype.
1400
1401 2007-04-06  Matt Thomas  <matt@netbsd.org>
1402
1403         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1404         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1405         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1406
1407 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1408
1409         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1410
1411 2007-04-04  Paul Brook  <paul@codesourcery.com>
1412
1413         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1414         (insns): Use I15 for vext.
1415
1416 2007-04-04  Paul Brook  <paul@codesourcery.com>
1417
1418         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1419
1420 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1421
1422         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1423         outputting_stabs_line_debug.
1424
1425 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1426
1427         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1428         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1429         devices.
1430         * doc/c-avr.texi: Document new devices.
1431
1432 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1433
1434         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1435         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1436         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1437
1438 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1439             Bob Wilson  <bob.wilson@acm.org>
1440
1441         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1442         Do not check is_loop_target flag.
1443         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1444         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1445         xtensa_move_labels for alignment of loop opcodes.
1446
1447 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1448
1449         * config/tc-i386.c (process_suffix): Reindent a bit.
1450
1451 2007-03-30  Paul Brook  <paul@codesourcery.com>
1452
1453         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1454         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1455         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1456
1457 2007-03-29  DJ Delorie  <dj@redhat.com>
1458
1459         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1460         (md_relax_table): Add entries for ADJNZ macros.
1461         (M32C_Macros): Add ADJNZ macros.
1462         (subtype_mappings): Add entries for ADJNZ macros.
1463         (insn_to_subtype): Check for adjnz and sbjnz insns.
1464         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1465         (md_convert_frag): Convert adjnz and sbjnz.
1466
1467 2007-03-29  Nick Clifton  <nickc@redhat.com>
1468
1469         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1470         initialization.
1471         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1472         using ITBL_NUMBER_OF_PROCESSORS.
1473         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1474
1475 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1476
1477         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1478         register operands, encode destination in i.rm.regmem if its
1479         RegMem bit is set.
1480
1481 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1482             Phil Edwards  <phil@codesourcery.com>
1483
1484         * doc/as.texinfo: Put the contents after the title page rather
1485         than at the end of the document.
1486
1487 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1488
1489         * NEWS: Mention ".reloc".
1490
1491 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1492
1493         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1494         in FLIX instructions.
1495
1496 2007-03-26  Julian Brown  <julian@codesourcery.com>
1497
1498         * config/tc-arm.c (arm_it): Add immisfloat field.
1499         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1500         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1501         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1502         float.
1503         (neon_cmode_for_move_imm): Reject non-float immediates for float
1504         operands.
1505         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1506
1507 2007-03-26  Julian Brown  <julian@codesourcery.com>
1508
1509         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1510
1511 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1512
1513         * doc/as.texinfo (Reloc): Document.
1514         * read.c (potable): Add "reloc".
1515         (s_reloc): New function.
1516         * write.c (reloc_list): New global var.
1517         (resolve_reloc_expr_symbols): New function.
1518         (write_object_file): Call it.
1519         (write_relocs): Process reloc_list.
1520         * write.h (struct reloc_list): New.
1521         (reloc_list): Declare.
1522
1523 2007-03-24  Paul Brook  <paul@codesourcery.com>
1524
1525         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1526
1527 2007-03-24  Paul Brook  <paul@codesourcery.com>
1528         Mark Shinwell  <shinwell@codesourcery.com>
1529
1530         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1531         (parse_operands): Don't expect comma if first operand missing.
1532         Handle OP_oRRw.
1533         (do_srs): Encode register number, checking it is r13.  Update comment.
1534         (insns): Update SRS entries to take a register.
1535
1536 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1537
1538         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1539
1540 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1541
1542         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1543         attempt to jump to the next instruction into NOPs.
1544
1545 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1546
1547         * config/tc-spu.c: Don't include opcode/spu.h.
1548         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1549         (md_apply_fix): Adjust.
1550         * config/tc-spu.h: Include opcode/spu.h.
1551         (struct tc_fix_info): New.
1552         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1553         (TC_FORCE_RELOCATION): Define.
1554
1555 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1556
1557         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1558
1559 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1560
1561         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1562         xchg for xchg %rax,%rax.
1563
1564 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1565
1566         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1567         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1568
1569 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1570
1571         PR binutils/4218
1572         * config/tc-i386.c (match_template): Properly handle 64bit mode
1573         "xchg %eax, %eax".
1574
1575 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1576
1577         PR gas/4124
1578         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1579
1580 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1581
1582         * Makefile.am: Run dep-am.
1583         * Makefile.in: Regenerated.
1584
1585         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1586
1587         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1588         (NOP_OPCODE): Removed.
1589         (template): Likewise.
1590
1591 2007-03-21  Andreas Schwab  <schwab@suse.de>
1592
1593         * config/tc-i386.h (NOP_OPCODE): Restore.
1594
1595 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1596
1597         * config/tc-arm.c (do_mul): Don't warn about overlapping
1598         Rd and Rm operands when assembling for v6 or above.
1599         Correctly capitalize register names in the messages.
1600         (do_mlas): Likewise.  Delete spurious blank line.
1601
1602 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1603
1604         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1605
1606 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1607
1608         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1609         i386_regtab.
1610         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1611         on i386_regtab.
1612
1613 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1614
1615         PR gas/4184
1616         * app.c (do_scrub_chars): PUT after setting states.
1617
1618 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1619
1620         * Makefile.am: Run "make dep-am".
1621         * Makefile.in: Regenerated.
1622
1623         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1624         "opcode/i386.h".
1625         (md_begin): Check reg_name != NULL for the last entry in
1626         i386_regtab.
1627
1628         * config/tc-i386.h: Move many entries to opcode/i386.h and
1629         opcodes/i386-opc.h.
1630
1631         * configure.in (need_opcodes): Set true for i386.
1632         * configure: Regenerated.
1633
1634 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1635
1636         * Makefile.am (REPORT_BUGS_TO): Removed.
1637         (INCLUDES): Remove -DREPORT_BUGS_TO.
1638         * Makefile.in: Regenerated.
1639
1640         * configure.in (--with-bugurl): Removed.
1641         * configure: Regenerated.
1642
1643         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1644         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1645         (TEXI2DVI): Likewise.
1646         (gasver.texi): Removed.
1647         (MOSTLYCLEANFILES): Remove gasver.texi.
1648         (as.1): Don't depend on gasver.texi.
1649         * doc/Makefile.in: Regenerated.
1650
1651         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1652
1653 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1654
1655         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1656         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1657         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1658         * gas/symbols.c (copy_symbol_attributes): Use
1659         TC_COPY_SYMBOL_ATTRIBUTES.
1660
1661 2007-03-14  Paul Brook  <paul@codesourcery.com>
1662
1663         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1664
1665 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1666
1667         PR 4029
1668         * write.c (relax_segment): Insert extra alignment padding
1669         to break infinite relax loop when given impossible
1670         gcc_except_table assembly.
1671
1672 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1673
1674         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1675         on i.tm.base_opcode.
1676         (match_template): Likewise.
1677         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1678
1679         * config/tc-i386.h (Opcode_D): New.
1680         (Opcode_FloatR): Likewise.
1681         (Opcode_FloatD): Likewise.
1682         (D): Redefined.
1683         (W): Likewise.
1684         (FloatMF): Likewise.
1685         (FloatR): Likewise.
1686         (FloatD): Likewise.
1687
1688 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1689
1690         * app.c (do_scrub_chars): Recognize comments after # line "file".
1691         * read.c (get_linefile_number): New.
1692         (s_app_line): Accept ill-formed .linefile lines as comments.
1693
1694 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1695
1696         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1697
1698 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1699
1700         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1701         * as.h (new_logical_line_flags): New.
1702         * input-scrub.c (new_logical_line): Turned into wrapper for...
1703         (new_logical_line_flags): this.  Handle flags.
1704         * read.c (potable): Add linefile.  Adjust appline argument.
1705         (s_app_file): Fake .appfiles no more.
1706         (s_app_line): For .linefile, accept file name and flags.
1707
1708 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1709
1710         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1711
1712 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1713
1714         * Makefile.am: Run "make dep-am".
1715         * Makefile.in: Regenerate.
1716         * po/POTFILES.in: Regenerate.
1717
1718 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1719
1720         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1721         bug-reporting URL.
1722         * doc/Makefile.am (gasver.texi): Define BUGURL.
1723         * doc/as.texinfo: Use BUGURL.
1724         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1725
1726 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1727
1728         * config/tc-s390.c (md_parse_option): z9-ec option added.
1729
1730 2007-03-02  Paul Brook  <paul@codesourcery.com>
1731
1732         * config/tc-arm.c (relax_immediate): Always return positive values.
1733         (relaxed_symbol_addr): New function.
1734         (relax_adr, relax_branch): Use it.
1735         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1736
1737 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1738
1739         * as.c (parse_args): Update copyright date.
1740
1741 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1742
1743         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1744
1745 2007-02-28  Nick Clifton  <nickc@redhat.com>
1746
1747         PR gas/3797
1748         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1749         just return -1 whenever a problem is encountered.
1750         (md_assemble): If do_assemble returns -1 generate a non-fatal
1751         error message and return.
1752
1753         PR gas/2623
1754         * config/tc-msp430.c (line_separator_char): Change to '{'.
1755
1756 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1757
1758         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1759         (build_jump_insn): Likewise.
1760         (build_insn): Likewise.
1761         (s_m68hc11_relax): Likewise.
1762
1763 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1764
1765         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1766
1767 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1768
1769         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1770
1771 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1772
1773         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1774         (md_assemble): Likewise.
1775
1776 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1777
1778         * write.c (size_seg): Always clear SEC_RELOC here.
1779         (install_reloc): New function, extracted from..
1780         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1781         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1782         testing frag size.  Set SEC_RELOC here.
1783
1784 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1785
1786         PR 4082
1787         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1788
1789 2007-02-20  Thiemo Seufer  <ths@mips.com>
1790
1791         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1792
1793 2007-02-20  Thiemo Seufer  <ths@mips.com>
1794
1795         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1796
1797 2007-02-20  Thiemo Seufer  <ths@mips.com>
1798             Chao-Ying Fu  <fu@mips.com>
1799
1800         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1801         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1802         (macro_build): Add case '2'.
1803         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1804         (validate_mips_insn): Add support for balign instruction.
1805         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1806         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1807         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1808         command line options.
1809         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1810         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1811         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1812         .set dspr2, .set nodspr2.
1813
1814 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1815
1816         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1817         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1818
1819 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1820
1821         * write.c (TC_FX_SIZE_SLACK): Define.
1822         (write_relocs): Reinstate check for fixup within frag.
1823         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1824         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1825         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1826         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1827         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1828
1829 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1830             Nathan Sidwell  <nathan@codesourcery.com>
1831             Vladimir Prus  <vladimir@codesourcery.com
1832             Joseph Myers  <joseph@codesourcery.com>
1833
1834         * configure.in (--with-bugurl): New option.
1835         * configure: Regenerate.
1836         * dep-in.sed: Remove bin-bugs.h.
1837         * Makefile.am (REPORT_BUGS_TO): Define.
1838         (INCLUDES): Define REPORT_BUGS_TO.
1839         (DEP_INCLUDES): Likewise.
1840         ($(OBJS)): No longer depend on bin-bugs.h.
1841         * Makefile.in: Regenerate.
1842         * doc/Makefile.in: Regenerate.
1843         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1844         * as.h: Remove include of bin-bugs.h.
1845
1846 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1847
1848         * write.c: White space fixes.
1849         (fixup_segment): Move symbol_mri_common_p adjustments..
1850         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1851         (adjust_reloc_syms): ..to here.
1852
1853 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1854
1855         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1856         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1857         (subseg_set_rest): Remove unnecessary cast.
1858         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1859         Remove unnecessary forward declarations and casts.
1860         (set_symtab): Delete extern bfd_alloc.
1861         (fixup_segment): Move.
1862
1863 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1864
1865         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1866         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1867         (mcf5475_ctrl, mcf5485_ctrl): New.
1868         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1869         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1870         (init_table): Add asid, mmubar, adjust rombar0.
1871
1872 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1873
1874         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1875         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1876         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1877         code, and test for these insns using a combination of
1878         opcode_modifier and operand_types.
1879
1880 2007-02-07  Paul Brook  <paul@codesourcery.com>
1881
1882         * configure.tgt: Add arm*-*-uclinux-*eabi.
1883
1884 2007-02-05  Dave Brolley  <brolley@redhat.com>
1885             Richard Sandiford  <rsandifo@redhat.com>
1886             DJ Delorie  <dj@redhat.com>
1887             Stan Cox  <scox@redhat.com>
1888             Jim Blandy  <jimb@redhat.com>
1889             Nick Clifton  <nickc@redhat.com>
1890             Jim Wilson  <wilson@redhat.com>
1891             Frank Ch. Eigler  <fche@redhat.com>
1892             Graydon Hoare  <graydon@redhat.com>
1893             Ben Elliston  <bje@redhat.com>
1894             John Healy  <jhealy@redhat.com>
1895             Richard Henderson  <rth@redhat.com>
1896
1897         * Makefile.am (CPU_TYPES): Add mep.
1898         (TARGET_CPU_CFILES): Add tc-mep.c.
1899         (TARGET_CPU_HFILES): Add tc-mep.h.
1900         (DEPTC_mep_elf): New variable.
1901         (DEPTC_mep_coff): Likewise.
1902         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1903         * configure.in: Support mep.
1904         * configure.tgt: Likewise.
1905         * config/tc-mep.c: New file.
1906         * config/obj-elf.c: New file.
1907         * config/tc-mep.c: New file.
1908         * config/tc-mep.h: New file.
1909         * testsuite/gas/mep: New testsuite with content.
1910         * Makefile.in: Regenerate.
1911         * configure: Regenerate.
1912
1913 2007-02-05  Dave Brolley  <brolley@redhat.com>
1914
1915         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1916         (complex_reloc_installation_howto): Removed.
1917
1918 2007-02-05  Dave Brolley  <brolley@redhat.com>
1919             Graydon Hoare  <graydon@redhat.com>
1920             DJ Delorie  <dj@redhat.com>
1921             Catherine Moore  <clm@redhat.com>
1922             Michael Chastain  <chastain@redhat.com>
1923             Frank Ch. Eigler  <fche@redhat.com>
1924
1925         * symbols.c (use_complex_relocs_for): New, to decide
1926         when to use complex relocs. Add signed RELC support.
1927         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1928         encode expression symbols as mangled complex relocation symbols (when
1929         compiled with -DOBJ_COMPLEX_RELOC).
1930         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1931         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1932         encode_addend with new args. Modify to get start, length from
1933         ifield whenever it is set. Also change condition on which
1934         self-describing relocs are encoded. Add hook into
1935         gas_cgen_encode_addend.
1936         (queue_fixup_recursively): Add signed RELC support. Change from masked
1937         expr to trunc flag. Restore assignment of sub-field value to
1938         temporary in fixups array. Reflect changed meaning of last arg to
1939         queue_fixup_recursively.
1940         (fixup): Add cgen_maybe_multi_ifield member.
1941         (make_right_shifted_expr): New function.
1942         (queue_fixup): Change to recursive function that fragments
1943         fixups if operand has a multi-ifield.
1944         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1945         symbols, call weak_operand_overflow_check, and fragment call
1946         queue_fixup with operand fields.
1947         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1948         (weak_operand_overflow_check): New function to try to select
1949         insns correctly.
1950         (gas_cgen_encode_addend): New function for relc.
1951         (gas_cgen_install_complex_reloc): Likewise.
1952         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1953         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1954         cgen_maybe_multi_ifield field to fx_cgen substructure.
1955         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1956         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1957
1958 2007-02-03  DJ Delorie  <dj@delorie.com>
1959
1960         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1961         byte relocs.
1962         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1963         (m32c_cons_fix_new): Prototype.
1964
1965 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1966
1967         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1968         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1969
1970 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1971
1972         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1973         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1974         (map_suffix_reloc_to_operator): New.
1975         (map_operator_to_reloc): New.
1976         (expression_maybe_register): Fix incorrect test of return value from
1977         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1978         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1979
1980 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1981
1982         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1983         (tinsn_get_tok): Delete prototype.
1984         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1985
1986 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1987
1988         * config/xtensa-relax.h (struct build_instr): Delete id field.
1989         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1990         and LABEL tokens.
1991         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1992         set op_data fields to zero.
1993         (parse_id_constant): Delete.
1994         (build_transition): Remove code to handle numbered literals and labels.
1995
1996 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1997
1998         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1999         (build_transition_table): Likewise.
2000
2001 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
2002
2003         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2004         fx_tcbit.
2005         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2006
2007 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
2008
2009         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2010         (struct fix <fx_plt>): Rename to tcbit2.
2011         * write.c (fix_new_internal): Adjust.
2012         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2013         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2014         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2015         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2016         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2017         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2018         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2019         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2020         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2021         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2022         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2023         Instead, compare fx_r_type.
2024         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2025         fx_tcbit in place of fx_plt.
2026         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2027         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2028         to fx_plt.
2029
2030 2007-01-30  Nick Clifton  <nickc@redhat.com>
2031
2032         * as.c (main): Mark symbols created via the --defsym command line
2033         option as volatile so that they can be overridden later on by a
2034         .set directive.  This maintains compatibility with the behaviour
2035         of earlier versions of the assembler.
2036         * doc/as.texinfo (--defsym): Document that the defined symbol's
2037         value can be overridden via a .set directive.
2038
2039 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
2040
2041         * config/tc-i386.c (swap_imm_operands): Renamed to ...
2042         (swap_2_operands): This.  Take 2 ints.
2043         (md_assemble): Updated.
2044         (swap_operands): Call swap_2_operands to swap 2 operands.
2045
2046 2007-01-24  DJ Delorie  <dj@redhat.com>
2047
2048         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2049
2050 2007-01-22  Nick Clifton  <nickc@redhat.com>
2051
2052         PR gas/3871
2053         * tc-score.c: Remove unnecessary uses of _().
2054         Make the err_msg[] a file level local array in order to save
2055         storage space.
2056         Remove unnecessary sprintf()s.
2057
2058 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
2059
2060         PR gas/3871
2061         * config/tc-score.c : Using _() for const string.
2062         Do not assign inst.error with a local string pointer.
2063         (md_section_align): Pad section.
2064
2065 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
2066
2067         * config/tc-i386.c (build_modrm_byte): Check number of operands
2068         when procssing memory/register operand.
2069
2070 2007-01-12  Nick Clifton  <nickc@redhat.com>
2071
2072         PR gas/3856
2073         * macro.c (expand_irp): Do not ignore spaces inside quoted
2074         strings.
2075
2076 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2077
2078         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2079         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2080         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2081         (TC_FORCE_RELOCATION): Define.
2082         (TC_FORCE_RELOCATION_LOCAL): Define.
2083         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2084
2085 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2086
2087         * input-file.c (input_file_open): Check fgets return.
2088
2089 2007-01-11  Paul Brook  <paul@codesourcery.com>
2090
2091         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2092
2093 2007-01-11  Nick Clifton  <nickc@redhat.com>
2094
2095         PR gas/3707
2096         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2097         variable.
2098
2099         * config/tc-mcore.c (md_number_to_chars): Use
2100         number_to_chars_{big|little}endian.
2101
2102 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2103
2104         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2105         architecture by itself.
2106         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2107         (m68k_elf_final_processing): Treat Fido as an architecture by
2108         itself.
2109
2110 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2111
2112         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2113
2114 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2115
2116         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2117         depending on allow_naked_reg.
2118
2119 2007-01-04  Paul Brook  <paul@codesourcery.com>
2120
2121         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2122
2123 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2124
2125         PR gas/3830
2126         * config/tc-i386.c (register_prefix): New.
2127         (set_intel_syntax): Set set_intel_syntax to "" if register
2128         prefix isn't needed.
2129         (check_byte_reg): Use register_prefix for error message.
2130         (check_long_reg): Likewise.
2131         (check_qword_reg): Likewise.
2132         (check_word_reg): Likewise.
2133
2134 2007-01-04  Julian Brown  <julian@codesourcery.com>
2135
2136         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2137         (do_neon_qshl_imm): Likewise.
2138         (do_neon_rshl): New function. Handle rounding variants of
2139         v{q}shl-by-register.
2140         (insns): Use do_neon_rshl for vrshl, vqrshl.
2141
2142 2007-01-04  Paul Brook  <paul@codesourcery.com>
2143
2144         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2145         and vacle.
2146
2147 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2148
2149         * config/tc-i386.c (swap_operands): Remove branches.
2150
2151 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2152
2153         * config/tc-i386.c: Update copyright year.
2154         * config/tc-i386.h: Likewise.
2155
2156 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2157
2158         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2159         instead of int.
2160
2161 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2162
2163         * config/tc-i386.c: Convert to ISO C90 formatting
2164         * config/tc-i386.h: Likewise.
2165
2166 2007-01-03  David Daney  <ddaney@avtrex.com>
2167
2168         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2169         documentation.
2170
2171 For older changes see ChangeLog-2006
2172 \f
2173 Local Variables:
2174 mode: change-log
2175 left-margin: 8
2176 fill-column: 74
2177 version-control: never
2178 End: