1 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
3 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
5 <M_SAAD_AB>: ... here. Assert that !microMIPS.
7 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
9 * config/tc-moxie.h (md_convert_frag): Silence warning.
11 2014-08-22 Richard Henderson <rth@redhat.com>
13 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
14 register number for vector register types.
15 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
16 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
18 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
20 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
21 flag if both the processor and opcode flags match.
23 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
25 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
27 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
29 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
30 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
31 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
33 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
35 * config/tc-arm.c (parse_ifimm_zero): New function.
36 (enum operand_parse_code): Add OP_RSVD_FI0 value.
37 (parse_operands): Handle OP_RSVD_FI0.
38 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
40 2014-08-20 Alan Modra <amodra@gmail.com>
42 * Makefile.am: Typo fix.
43 * Makefile.in: Regenerate.
44 * po/POTFILES.in: Regenerate.
46 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
48 * Makefile.am: Add FreeBSD ARM support.
49 * Mafefile.in: Regenerate.
50 * configure.tgt: Add FreeBSD ARM support.
51 * config/te-armfbsdeabi.h: New file.
52 * config/te-armfbsdvfp.h: Likewise.
54 2014-08-19 Alan Modra <amodra@gmail.com>
56 * configure: Regenerate.
58 2014-08-18 Nick Clifton <nickc@redhat.com>
60 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
61 RELOC_RL78_DIFF fixups.
63 2014-08-18 Alan Modra <amodra@gmail.com>
65 * read.c (parse_mri_cons): Warning fix.
67 2014-08-14 Alan Modra <amodra@gmail.com>
69 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
70 * config.in: Regenerate.
71 * configure: Regenerate.
73 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
75 * config/tc-i386.c (omit_lock_prefix): New.
76 (output_insn): Omit lock prefix if omit_lock_prefix is true.
77 (OPTION_omit_lock_prefix): New.
78 (md_longopts): Add momit-lock-prefix.
79 (md_parse_option): Handle momit-lock-prefix.
80 (md_show_usage): Add momit-lock-prefix=[no|yes].
81 * doc/c-i386.texi (momit-lock-prefix): Document.
83 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
86 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
89 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
91 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
92 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
94 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
96 * config/tc-mips.c (mips_flags_frag): New static global.
97 (struct mips_set_options): Add oddspreg field.
98 (file_mips_opts, mips_opts): Initialize oddspreg.
99 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
101 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
102 and -mno-odd-spreg options.
103 (md_begin): Create .MIPS.abiflags section.
104 (fpabi_incompatible_with, fpabi_requires): New static function.
105 (check_fpabi): Likewise.
106 (mips_check_options): Handle fp=xx and oddspreg restrictions.
107 (file_mips_check_options): Set oddspreg by default for fp=xx.
108 (mips_oddfpreg_ok): Re-write function.
109 (check_regno): Check odd numbered registers regardless of FPR size.
110 For fp != 32 use as_bad instead of as_warn.
111 (match_float_constant): Rewrite check regarding FP register width. Add
112 support for generating constants when MXHC1 is present. Handle fp=xx
113 to comply with the ABI.
114 (macro): Update M_LI_DD similarly to match_float_constant. Generate
115 MTHC1 when available. Check that correct code can be generated for
116 fp=xx and fp=64 ABIs.
117 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
119 (mips_convert_ase_flags): New static function.
120 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
121 to determine when to add the EF_MIPS_FP64 flag. Populate the
122 .MIPS.abiflags section.
123 (md_mips_end): Update .gnu_attribute based on command line and .module
124 as applicable. Use check_fpabi to ensure .gnu.attribute and command
125 line/.module options are consistent.
126 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
127 -mfpxx, -modd-spreg and -mno-odd-spreg options.
128 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
129 gnu_attribute values and FP ABIs.
131 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
133 Add RTEMS target support and simplify matching
135 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
136 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
138 2014-07-27 Anthony Green <green@moxielogic.com>
140 * configure.tgt (generic_target): Add moxie-*-moxiebox*
141 * config/tc-moxie.c: Remove moxie_target_format.
142 (md_begin): Set default target_big_endian.
143 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
144 (TARGET_FORMAT): Set based on target_big_endian.
146 2014-07-26 Alan Modra <amodra@gmail.com>
148 * config/bfin-parse.y: Don't include obstack.h.
149 * config/obj-aout.c: Likewise.
150 * config/obj-coff.c: Likewise.
151 * config/obj-som.c: Likewise.
152 * config/tc-bfin.c: Likewise.
153 * config/tc-i960.c: Likewise.
154 * config/tc-rl78.c: Likewise.
155 * config/tc-rx.c: Likewise.
156 * config/tc-tic4x.c: Likewise.
158 * listing.c: Likewise.
159 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
160 * config/tc-aarch64.c (symbol_locate): Likewise.
161 * config/tc-arm.c (symbol_locate): Likewise.
162 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
163 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
164 (s3_build_dependency_insn_hsh): Likewise.
165 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
166 (s7_build_dependency_insn_hsh): Likewise.
167 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
168 (frag_new): Make parameter a size_t.
169 (frag_var_init): Make max_chars and var parameters size_t.
170 (frag_var, frag_variant): Likewise.
171 (frag_room): Return a size_t.
172 (frag_align_pattern): Make n_fill parameter a size_t.
173 * frags.h: Update function prototypes.
174 * symbols.c (save_symbol_name): Make name_length a size_t.
176 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
177 Alexander Ivchenko <alexander.ivchenko@intel.com>
178 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
179 Sergey Lega <sergey.s.lega@intel.com>
180 Anna Tikhonova <anna.tikhonova@intel.com>
181 Ilya Tocar <ilya.tocar@intel.com>
182 Andrey Turetskiy <andrey.turetskiy@intel.com>
183 Ilya Verbin <ilya.verbin@intel.com>
184 Kirill Yukhin <kirill.yukhin@intel.com>
185 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
187 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
188 * doc/c-i386.texi: Document avx512dq/.avx512dq.
190 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
191 Alexander Ivchenko <alexander.ivchenko@intel.com>
192 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
193 Sergey Lega <sergey.s.lega@intel.com>
194 Anna Tikhonova <anna.tikhonova@intel.com>
195 Ilya Tocar <ilya.tocar@intel.com>
196 Andrey Turetskiy <andrey.turetskiy@intel.com>
197 Ilya Verbin <ilya.verbin@intel.com>
198 Kirill Yukhin <kirill.yukhin@intel.com>
199 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
201 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
202 * doc/c-i386.texi: Document avx512bw/.avx512bw.
204 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
205 Alexander Ivchenko <alexander.ivchenko@intel.com>
206 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
207 Sergey Lega <sergey.s.lega@intel.com>
208 Anna Tikhonova <anna.tikhonova@intel.com>
209 Ilya Tocar <ilya.tocar@intel.com>
210 Andrey Turetskiy <andrey.turetskiy@intel.com>
211 Ilya Verbin <ilya.verbin@intel.com>
212 Kirill Yukhin <kirill.yukhin@intel.com>
213 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
215 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
216 (build_vex_prefix): Don't abort on VEX.W.
217 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
218 (check_VecOperations): Ditto.
219 * doc/c-i386.texi: Document avx512vl/.avx512vl.
221 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
223 Add or reactivate or1k-*-rtems*
224 * gas/configure.tgt (or1k-*-rtems*): Add.
226 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
228 * config/tc-i386.c (parse_register): Set need_vrex.
230 2014-07-15 Jiong Wang <jiong.wang@arm.com>
232 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
233 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
234 one logic error when checking X_op.
236 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
238 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
239 --pcrel about TAB (DBCCLBR, LONG) conversion.
241 2014-07-12 David Majnemer <david.majnemer@gmail.com>
243 * read.c (assign_symbol): Don't force "set" symbols local for PE.
245 2014-07-08 Jiong Wang <jiong.wang@arm.com>
247 * config/tc-arm.c (literal_pool): New field "alignment".
248 (find_or_make_literal_pool): Initialize "alignment" to 2.
249 (s_ltorg): Align the pool using value of "alignment"
250 (parse_big_immediate): New parameter "in_exp". Return
251 parsed expression if "in_exp" is not null.
252 (parse_address_main): Invoke "parse_big_immediate" for
254 (add_to_lit_pool): Add one parameter 'nbytes'.
255 Split 8 byte entry into two 4 byte entry.
256 Add padding to align 8 byte entry to 8 byte boundary.
257 (encode_arm_cp_address): Generate literal pool entry if possible.
258 (move_or_literal_pool): Generate entry for vldr case.
259 (enum lit_type): New enum type.
260 (do_ldst): Use new enum type.
261 (do_ldstv4): Likewise.
262 (do_t_ldst): Likewise.
263 (neon_write_immbits): Support Thumb-2 mode.
265 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
267 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
268 name as [xyz][hl]. Permit using a symbol whoes name begins with
269 ‘r’ to refer to a register.
270 Allow arbitrary expressions for the P and p operators.
271 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
272 BFD_RELOC_AVR_PORT6 relocations.
274 2014-07-04 Alan Modra <amodra@gmail.com>
276 * doc/internals.texi: Update "configure.in" comments.
277 * acinclude.m4: Likewise.
278 * config/tc-sparc.c: Likewise.
280 2014-07-04 Alan Modra <amodra@gmail.com>
282 * configure.ac: Rename from configure.in.
283 * Makefile.in: Regenerate.
284 * config.in: Regenerate.
285 * doc/Makefile.in: Regenerate.
287 2014-07-04 Alan Modra <amodra@gmail.com>
289 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
290 * doc/Makefile.in: Regenerate.
292 2014-07-04 Alan Modra <amodra@gmail.com>
294 * configure.in: Include bfd/version.m4.
295 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
296 (BFD_VERSION): Delete.
297 * configure.com: Get bfd version from bfd/version.m4.
298 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
299 * configure: Regenerate.
300 * Makefile.in: Regenerate.
301 * doc/Makefile.in: Regenerate.
303 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
304 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
305 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
306 Soundararajan <Sounderarajan.D@atmel.com>
308 * config/tc-avr.c (mcu_types): Add avrtiny arch.
309 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
311 (md_show_usage): Add avrtiny arch in usage message.
312 (avr_operand): validate and issue error for invalid register for
314 add new reloc exp for 16 bit lds/sts instruction.
315 (md_apply_fix): check 16 bit lds/sts operand for out of range and
317 (md_assemble): check ISA for arch and issue diagnostic.
318 * NEWS: Mention new support.
319 * doc/c-avr.texi: Document support for avrtiny architecture.
321 2014-06-27 Alan Modra <amodra@gmail.com>
323 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
324 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
325 (obj_mach_o_frob_label): Avoid cascading errors.
326 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
328 2014-06-18 DJ Delorie <dj@redhat.com>
330 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
333 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
335 * config/tc-mmix.c (loc_assert_s): New member frag.
337 (mmix_md_end): If an error is reported for a LOC expression, patch
340 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
343 * macro.c (buffer_and_nest): Honour #line directives inside
346 2014-06-17 Jiong Wang <jiong.wang@arm.com>
348 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
350 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
352 * config/tc-cris.c (cris_bad): New function.
353 (cris_process_instruction): Where applicable, use it instead of
356 2014-06-16 Nick Clifton <nickc@redhat.com>
358 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
360 2014-06-16 Jiong Wang <jiong.wang@arm.com>
362 * config/tc-aarch64.c (END_OF_INSN): New macro.
363 (parse_operands): Handle operand given and in wrong format when
366 2014-06-16 Alan Modra <amodra@gmail.com>
368 * write.h (subsegs_finish): Delete declaration.
369 * write.c (subsegs_finish): Make static.
370 (write_object_file): Call subsegs_finish from here. Don't print
371 warning and error count here..
372 * as.c (main): ..do so here instead. Remove dead code for "no
373 object file generated". Split out count strings to better support
374 internationalisation. Don't call subsegs_finish. Tidy setting of
375 "keep_it". Run write_object_file even after errors.
376 (keep_it): Make static.
377 * config/obj-elf.c (elf_frob_symbol): Remove assert.
378 (elf_frob_file_before_adjust): Likewise.
380 2014-06-16 Alan Modra <amodra@gmail.com>
382 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
385 2014-06-16 Alan Modra <amodra@gmail.com>
387 * config/tc-i386.c (reloc): Don't avoid pcrel check for
388 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
390 2014-06-16 Alan Modra <amodra@gmail.com>
392 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
393 (tic6x_output_exidx_entry): Likewise.
394 (md_apply_fix): Simplify 1 byte md_number_to_chars.
396 2014-06-16 Alan Modra <amodra@gmail.com>
398 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
399 end of archive to temp file.
400 (tic54x_start_line_hook): Start scan for parallel on next line,
401 not one char into next line (which may overrun the buffer).
403 2014-06-16 Alan Modra <amodra@gmail.com>
405 * config/tc-vax.c (md_apply_fix): Rewrite.
406 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
407 define rather than the equivalent BFD_RELOC_NONE.
409 2014-06-16 Alan Modra <amodra@gmail.com>
411 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
412 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
413 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
415 2014-06-16 Alan Modra <amodra@gmail.com>
417 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
418 with a nop rather than leaving uninitialised.
420 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
422 * config/tc-score7.c: Replace sprintf with strcpy where
424 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
426 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
427 (s3_relax_cmpbranch_inst32): Likewise.
429 2014-06-07 Alan Modra <amodra@gmail.com>
431 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
432 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
435 2014-06-02 Martin Storsjo <martin@martin.st>
437 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
439 2014-06-05 Joel Brobecker <brobecker@adacore.com>
441 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
442 bfd's development.sh.
443 * Makefile.in, configure: Regenerate.
445 2014-06-03 Nick Clifton <nickc@redhat.com>
447 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
448 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
449 * doc/c-msp430.texi: Update command line option description.
451 2014-05-22 Alan Modra <amodra@gmail.com>
453 * listing.c (listing_warning, listing_error): Add space after colon.
454 * messages.c (as_warn_internal, as_bad_internal): Use the same
457 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
459 * config/tc-mips.c (file_mips_opts_checked): New static global.
460 (s_module): New static function.
462 (mips_pseudo_table): Add .module handler.
463 (mips_set_ase): Add opts argument and use instead of mips_opts.
464 (md_assemble): Use file_mips_check_options.
465 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
466 (mips_set_architecture): Delete function. Moved to...
467 (mips_after_parse_args): Here. All logic now applies to
468 file_mips_opts first and then copies the final state to mips_opts.
469 Move error checking and defaults inference to mips_check_options and
470 file_mips_check_options.
471 (mips_check_options): New static function. Common option checking for
472 command line, .module and .set. Use .module values in error messages
473 instead of refering to command line options.
474 (file_mips_check_options): New static function. A wrapper for
475 mips_check_options with file_mips_opts. Updates BFD arch based on
477 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
478 supported by both .set and .module are moved to parse_code_option.
479 Warnings and errors are kept in s_mipsset because when
480 parse_code_option is used with s_module the warnings are deferred
481 until code is generated. Any setting supporting 'default' value is
482 kept in s_mipsset as it is not applicable to s_module. Inferred
483 settings are also kept in s_mipsset as s_module does not infer any
484 settings. Use mips_check_options.
485 (parse_code_option): New static function derived from s_mipsset.
486 (s_module): New static function that implements .module. Allows file
487 level settings to be changed until code is generated.
488 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
489 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
490 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
491 (md_mips_end): Use file_mips_check_options.
492 * doc/c-mips.texi: Document .module.
494 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
496 * messages.c (as_warn_internal): Remove extra whitespace from
499 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
501 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
502 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
504 2014-05-20 Mike Stump <mikestump@comcast.net>
506 * messages.c (as_warn_internal): Ensure we don't interleave output
507 within a single line when make -j is used.
508 (as_bad_internal): Likewise.
510 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
512 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
513 * config/obj-elf.c (recorded_attribute_info): New structure.
514 (recorded_attributes): New variable.
515 (record_attribute, obj_elf_seen_attribute): New functions.
516 (obj_elf_vendor_attribute): Record which attributes have been seen.
518 2014-05-20 Nick Clifton <nickc@redhat.com>
520 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
521 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
522 (msp430_srcoperand): Store vshift value in operand.
524 2014-05-19 Nick Clifton <nickc@redhat.com>
527 * config/tc-i386.c (md_apply_fix): Improve the detection of code
528 symbols for 32-bit PE targets.
530 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
532 * config/tc-mips.c (md_obj_begin): Delete.
533 (md_obj_end): Fold into...
534 (md_mips_end): ...here. Move to end of file.
536 2014-05-17 Nick Clifton <nickc@redhat.com>
539 * config/tc-v850.c (handle_ctoff): Generate an error if called
540 when using the RH850 ABI.
542 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
544 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
545 and OPTION_64BIT_DOUBLES.
546 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
547 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
548 (md_show_usage): Show all of the RL78 options.
549 (rl78_float_cons): New static functions.
550 (md_pseudo_table): Update handler for "double".
551 * doc/c-rl78.texi: Document new options.
552 * doc/as.texinfo: Likewise.
554 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
556 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
557 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
558 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
559 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
561 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
563 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
566 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
568 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
569 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
570 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
571 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
573 (file_mips_opts): Here. New static global. Update throughout.
574 (mips_opts): Update defaults for gp32 and fp.
576 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
578 * config/tc-mips.c (streq): Define.
579 (mips_convert_symbolic_attribute): New function.
580 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
581 (mips_convert_symbolic_attribute): New prototype.
583 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
585 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
588 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
590 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
592 (ISA_HAS_64BIT_FPRS): Likewise.
593 (ISA_HAS_ROR): Likewise.
594 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
595 (ISA_HAS_MXHC1): Likewise.
596 (hilo_interlocks): Likewise.
597 (md_longopts): Likewise.
598 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
599 (ISA_HAS_DROR): Likewise.
600 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
602 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
604 (md_parse_option): Likewise.
605 (s_mipsset): Likewise.
606 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
607 and mips64r5. Also change p5600 entry to be mips32r5.
608 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
610 * configure: Regenerate.
611 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
612 -mips64r5 command line options.
613 * doc/as.texinfo: Likewise.
615 2014-04-28 Nick Clifton <nickc@redhat.com>
618 * config/tc-i386.c (md_apply_fix): Do not adjust value of
619 pc-relative fixes against weak symbols.
621 2014-04-26 Alan Modra <amodra@gmail.com>
623 * po/POTFILES.in: Regenerate.
625 2014-04-24 Nick Clifton <nickc@redhat.com>
627 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
630 2014-04-23 Will Newton <will.newton@linaro.org>
632 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
633 directly instead of mapping_state.
635 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
637 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
638 (md_longopts): Add xpa and no-xpa command line options.
639 (mips_ases): Add MIPS XPA ASE.
640 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
641 * doc/as.texinfo: Document the MIPS XPA command line options.
642 * doc/c-mips.texi: Document the MIPS XPA command line options,
643 and assembler directives.
645 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
647 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
648 unbreak self-test mode.
650 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
652 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
655 2014-04-22 Christian Svensson <blue@cmd.nu>
657 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
658 * configure.in: Likewise.
659 * configure.tgt: Likewise.
660 * doc/as.texinfo: Likewise.
661 * config/obj-coff.h: Likewise.
662 * config/tc-or1k.c: New file.
663 * config/tc-or1k.h: New file.
664 * config/tc-openrisc.c: Delete.
665 * config/tc-openrisc.h: Delete.
666 * config/tc-or32.c: Delete.
667 * config/tc-or32.h: Delete.
668 * Makefile.in: Regenerate.
669 * configure: Regenerate.
671 2014-04-16 Alan Modra <amodra@gmail.com>
673 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
674 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
676 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
678 * config/tc-avr.c: Add new flag mlink-relax.
679 (md_show_usage): Add flag and help text.
680 (md_parse_option): Record whether link relax is turned on.
681 (relaxable_section): New.
682 (avr_validate_fix_sub): New.
683 (avr_force_relocation): New.
684 (md_apply_fix): Generate DIFF reloc.
685 (avr_allow_local_subtract): New.
687 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
688 (TC_FORCE_RELOCATION): Define.
689 (TC_FORCE_RELOCATION_SUB_SAME): Define.
690 (TC_VALIDATE_FIX_SUB): Define.
691 (avr_force_relocation): Declare.
692 (avr_validate_fix_sub): Declare.
693 (md_allow_local_subtract): Define.
694 (avr_allow_local_subtract): Declare.
696 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
698 * config/tc-mips.c (mips_cpu_info_table): Add P5600
700 * doc/c-mips.texi: Document p5600.
702 2014-04-09 Nick Clifton <nickc@redhat.com>
704 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
705 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
706 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
707 * read.c (emit_expr_fix): Mark the r parameter as potentially
710 2014-04-09 Alan Modra <amodra@gmail.com>
712 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
714 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
715 (ppc_elf_cons_fix_check): New function.
716 (md_assemble): Set last_insn, last_seg, last_subseg.
717 (ppc_byte, md_apply_fix): Handle warn_476.
718 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
719 (ppc_elf_cons_fix_check): Declare.
720 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
722 2014-04-09 Alan Modra <amodra@gmail.com>
724 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
725 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
726 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
727 (TC_CONS_FIX_NEW): Add RELOC parameter.
728 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
729 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
730 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
731 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
732 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
733 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
734 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
735 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
736 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
738 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
739 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
740 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
741 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
742 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
743 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
744 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
745 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
746 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
747 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
749 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
750 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
752 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
753 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
754 * gas/config/tc-avr.c (exp_mod_data): Make global.
755 (pexp_mod_data): Delete.
756 (avr_parse_cons_expression): Return exp_mod_data pointer.
757 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
758 (exp_mod_data_t): Move typedef..
759 * gas/config/tc-avr.h: ..to here.
760 (exp_mod_data): Declare.
761 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
762 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
763 (TC_CONS_FIX_NEW): Update.
764 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
765 (cons_fix_new_hppa): Add hppa_field_selector param.
766 (fix_new_hppa): Adjust.
767 (parse_cons_expression_hppa): Return field selector.
768 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
769 (cons_fix_new_hppa): Likewise.
770 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
771 * gas/config/tc-i386.c (got_reloc): Delete static var.
772 (x86_cons_fix_new): Add reloc param.
773 (x86_cons): Return got reloc.
774 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
775 (TC_CONS_FIX_NEW): Add RELOC param.
776 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
778 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
779 (TC_CONS_FIX_NEW): Add reloc param.
780 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
782 (cons_fix_new_microblaze): Add reloc param.
783 * gas/config/tc-microblaze.h: Formatting.
784 (parse_cons_expression_microblaze): Update proto.
785 (cons_fix_new_microblaze): Likewise.
786 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
787 (nios2_cons): Return ldo reloc.
788 (nios2_cons_fix_new): Delete.
789 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
790 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
791 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
792 short. Make llong use cons.
793 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
794 (ppc_elf_cons): Delete.
795 (ppc_elf_parse_cons): New function.
796 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
797 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
798 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
799 (ppc_elf_parse_cons): Declare.
800 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
801 (sparc_cons): Return reloc specifier.
802 (cons_fix_new_sparc): Add reloc specifier param.
803 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
804 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
805 (TC_PARSE_CONS_RETURN_NONE): Define.
806 (sparc_cons, cons_fix_new_sparc): Update prototype.
807 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
808 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
809 (md_assemble): Likewise.
810 (parse_cons_expression_v850): Return reloc.
811 (cons_fix_new_v850): Add reloc parameter.
812 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
813 (cons_fix_new_v850): Likewise.
814 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
815 (vax_cons): Return reloc.
816 (vax_cons_fix_new): Add reloc parameter.
817 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
818 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
819 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
820 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
821 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
822 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
823 (do_parse_cons_expression): Adjust.
824 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
825 to emit_expr_with_reloc.
826 (emit_expr_with_reloc): New function handling reloc, mostly
829 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
831 (parse_mri_cons): Convert to ISO.
832 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
833 (TC_PARSE_CONS_RETURN_NONE): Define.
834 (emit_expr_with_reloc): Declare.
835 (emit_expr_fix): Update prototype.
836 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
838 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
840 * config/tc-i386.c (cpu_arch): Add .se1.
841 * doc/c-i386.texi: Document .se1/se1.
843 2014-04-02 DJ Delorie <dj@redhat.com>
845 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
846 pc-relative branches.
848 2014-04-02 Nick Clifton <nickc@redhat.com>
851 * config/tc-arm.c (create_unwind_entry): Report an error if an
852 attempt to recreate an unwind directive is encountered.
854 2014-03-27 Nick Clifton <nickc@redhat.com>
856 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
857 sprintf in order to avoid a compile time warning.
859 2014-03-26 Nick Clifton <nickc@redhat.com>
861 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
862 relocation is used on an 8-bit operand or vice versa.
863 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
864 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
866 2014-03-25 Nick Clifton <nickc@redhat.com>
868 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
869 switches the current segment back to the code segment recorded
870 when seh_proc was last invoked.
871 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
873 2014-03-25 Alan Modra <amodra@gmail.com>
875 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
876 (md_assemble): Likewise. Warn.
878 2014-03-21 David Weatherford <weath@cadence.com>
879 Max Filippov <jcmvbkbc@gmail.com>
881 * config/tc-xtensa.c (xtensa_check_frag_count)
882 xtensa_create_trampoline_frag,
883 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
884 find_trampoline_seg, search_trampolines, get_best_trampoline,
885 check_and_update_trampolines, add_jump_to_trampoline,
886 dump_trampolines): New functions.
887 (md_parse_option): Add cases for --[no-]trampolines options.
888 (md_assemble, finish_vinsn, xtensa_end): Add call to
889 xtensa_check_frag_count.
890 (xg_assemble_vliw_tokens): Add call to
891 xtensa_maybe_create_trampoline_frag.
892 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
893 (relax_frag_immed): Relax jump instructions that cannot reach its
895 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
897 * doc/as.texinfo: Document --[no-]trampolines command-line options.
898 * doc/c-xtensa.texi: Document trampolines relaxation and command
900 * frags.c (get_frag_count, clear_frag_count): New function.
901 (frag_alloc): Increment totalfrags counter.
902 * frags.h (get_frag_count, clear_frag_count): New function.
904 2014-03-20 DJ Delorie <dj@redhat.com>
906 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
907 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
909 * config/tc-rl78.h (md_relax_frag): Define.
910 (rl78_relax_frag): Declare.
911 * config/tc-rl78.c (rl78_relax): Add.
912 (md_assemble): Set up the variable frags also when relaxing.
914 (rl78_opcode_type): New.
915 (rl78_frag_fix_value): New.
916 (md_estimate_size_before_relax): New-ish.
917 (rl78_relax_frag): New.
918 (md_convert_frag): New-ish.
920 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
922 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
923 * config/tc-mips.c (md_pcrel_from): Remove error message.
924 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
925 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
926 PC-relative expressions. Handle BFD_RELOC_8.
928 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
930 * config/tc-sparc.c (hpriv_reg_table): Added entries for
931 %hstick_offset and %hstick_enable.
932 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
933 %hstick_enable hyperprivileged registers.
935 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
936 Nick Clifton <nickc@redhat.com>
938 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
939 CCS syntax compatibility mode is on or off.
940 (asmfunc_states): New enum to represent the asmfunc directive state.
941 (asmfunc_state): New variable holding the asmfunc directive state.
942 (comment_chars): Rename to arm_comment_chars.
943 (line_separator_chars): Rename to arm_line_separator_chars.
944 (s_ccs_ref): New function that handles the .ref directive.
945 (asmfunc_debug): New function.
946 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
947 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
948 (s_ccs_def): New function that handles the .def directive.
949 (tc_start_label_without_colon): New function.
950 (md_pseudo_table): Added new CCS directives.
951 (arm_ccs_mode): New function that handles the -mccs command line option.
952 (arm_long_opts): Added new -mccs command line option.
953 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
954 (TC_START_LABEL_WITHOUT_COLON): New macro.
955 (tc_start_label_without_colon): Added extern function declaration.
956 (tc_comment_chars): Define.
957 (tc_line_separator_chars): Define.
958 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
959 * read.c (read_begin): Likewise.
960 * doc/as.texinfo: Add documentation for the -mccs command line
962 * doc/c-arm.texi: Likewise.
963 * doc/internals.texi: Document tc_line_separator_chars.
964 * NEWS: Mention the new feature.
966 2014-03-18 Jiong Wang <jiong.wang@arm.com>
968 * config/tc-aarch64.c (aarch64_opts): Add new option
970 (verbose_error_p): Initialize to 1.
971 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
972 and -mno-verbose-error.
974 2014-03-17 Nick Clifton <nickc@redhat.com>
977 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
980 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
981 Jiong Wang <Jiong.Wang@arm.com>
983 * doc/c-aarch64.texi: Clean up some formatting issues.
984 (AArch64 Options): Document -mcpu and -march.
985 (AArch64 Extensions): New node.
987 2014-03-13 Tristan Gingold <gingold@adacore.com>
989 * config/tc-i386.c (use_big_obj): Declare.
990 (OPTION_MBIG_OBJ): Define.
991 (md_longopts): Add -mbig-obj option.
992 (md_parse_option): Handle it.
993 (md_show_usage): Display help for this option.
994 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
995 * doc/c-i386.texi: Document the option.
997 2014-03-12 Nick Clifton <nickc@redhat.com>
1000 * config/tc-aarch64.c (literal_expression): New structure.
1001 (literal_pool): Replace exp array with literal_expression array.
1002 (add_to_lit_pool): When adding a bignum cache the big value.
1003 (s_ltorg): When emitting a bignum initialise the global bignum
1004 array from the cached value.
1006 2014-03-12 Alan Modra <amodra@gmail.com>
1008 * Makefile.in: Regenerate.
1009 * config.in: Regenerate.
1010 * doc/Makefile.in: Regenerate.
1012 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1013 Vishnu KS <Vishnu.k_s@atmel.com>
1014 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1015 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1017 * gas/tc-avr.c: Add new devices
1018 avr25: ata5272, attiny828
1019 avr35: ata5505, attiny1634
1020 avr4: atmega8a, ata6285, ata6286, atmega48pa
1021 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1022 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1024 avr51: atmega128a, atmega1284
1025 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1026 atxmega32e5, atxmega16e5, atxmega8e5
1027 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1028 atxmega64c3, atxmega64d4
1029 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1030 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1031 atxmega256c3, atxmega384c3, atxmega384d3
1032 avrxmega7: atxmega128a4u
1033 * doc/c-avr.texi: Ditto.
1035 2014-03-05 Alan Modra <amodra@gmail.com>
1037 Update copyright years.
1039 2014-03-05 Alan Modra <amodra@gmail.com>
1041 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1042 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1044 2014-03-05 Alan Modra <amodra@gmail.com>
1046 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1047 later. Merge absolute and relative branch reloc selection.
1048 Generate 16-bit relocs for most 16-bit insn fields given a
1049 non-constant expression.
1051 2014-03-05 Alan Modra <amodra@gmail.com>
1053 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1054 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1056 2014-03-04 Heiher <r@hev.cc>
1058 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1061 2014-03-03 Nick Clifton <nickc@redhat.com>
1063 * config/msp430/msp430.c: Replace known mcu array with known
1064 msp430 ISA mcu name array.
1065 Accept any name for -mmcu option.
1066 Add -mz option to warn about missing NOP following an interrupt
1068 (check_for_nop): New.
1069 (msp430_operands): Emit a warning, if requested, when an interrupt
1070 changing instruction is not followed by a NOP.
1071 * doc/c-msp430.c: Document -mz option.
1073 2014-03-03 Alan Modra <amodra@gmail.com>
1075 * config/bfin-lex-wrapper.c: Correct copyright date.
1076 * config/obj-fdpicelf.c: Likewise.
1077 * config/obj-fdpicelf.h: Likewise.
1078 * config/tc-frv.c: Correct copyright punctuation.
1079 * config/tc-ip2k.c: Likewise.
1080 * config/tc-iq2000.c: Likewise.
1081 * config/tc-mep.c: Likewise.
1082 * config/tc-tic4x.c: Likewise.
1083 * config/tc-tic4x.h: Likewise.
1085 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1087 * config/tc-avr.c: Remove atxmega16x1.
1089 2014-02-28 Alan Modra <amodra@gmail.com>
1091 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1092 field for 64-bit dwarf.
1094 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1096 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1097 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1099 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1101 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1102 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1103 clflushopt/.clfushopt.
1105 2014-02-10 Alan Modra <amodra@gmail.com>
1107 * po/POTFILES.in: Regenerate.
1108 * po/gas.pot: Regenerate.
1110 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1112 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1113 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1114 %got_hiadj relocation operators. Sort table and add comment
1115 to explain ordering.
1116 (nios2_fix_adjustable): Test for new relocs.
1117 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1120 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1122 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1123 (nios2_assemble_args_m): Likewise.
1124 (md_assemble): Likewise.
1126 2014-01-24 DJ Delorie <dj@redhat.com>
1128 * config/tc-msp430.c (msp430_section): Always flag data sections,
1130 (msp430_frob_section): New. Make sure all sections are noticed if
1132 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1133 (msp430_comm): New. Likewise.
1134 (md_pseudo_table): Add them.
1135 * config/tc-msp430.h (msp430_frob_section): Declare.
1136 (tc_frob_section): Define.
1138 2014-01-23 Nick Clifton <nickc@redhat.com>
1140 * config/tc-msp430.c (show_mcu_list): Delete.
1141 (md_parse_option): Accept any MCU name. Accept several more
1142 variants for the -mcpu option.
1143 (md_show_usage): Do not call show_mcu_list.
1145 2014-01-22 DJ Delorie <dj@redhat.com>
1147 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1148 * doc/c-msp430.texi (MSP430 Directives): Document it.
1150 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1152 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1155 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1158 * config/tc-i386.c (check_VecOperands): Add check for invalid
1159 register set in AVX512 gathers.
1161 2014-01-22 Alan Modra <amodra@gmail.com>
1163 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1165 2014-01-21 DJ Delorie <dj@redhat.com>
1167 * config/tc-rl78.c (require_end_of_expr): New.
1168 (md_operand): Call it.
1169 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1172 2014-01-17 Will Newton <will.newton@linaro.org>
1174 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1175 for the s32.f64 flavours of VCVT.
1177 2014-01-14 Nick Clifton <nickc@redhat.com>
1180 * config/tc-z80.c (wrong_match): Provide format string to
1182 (parse_exp_not_indexed): Delete unused variable dummy.
1183 (emit_byte): Delete unused variable fixp.
1185 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1187 * config/tc-i386.c (regbnd): Removed.
1188 (vec_disp8): Likewise.
1190 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1192 * as.c (parse_args): Update copyright year to 2014.
1194 2014-01-07 Tom Tromey <tromey@redhat.com>
1196 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1199 2014-01-07 Tom Tromey <tromey@redhat.com>
1201 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1204 2014-01-07 Tom Tromey <tromey@redhat.com>
1206 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1208 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1210 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1212 For older changes see ChangeLog-2013
1214 Copyright (C) 2014 Free Software Foundation, Inc.
1216 Copying and distribution of this file, with or without modification,
1217 are permitted in any medium without royalty provided the copyright
1218 notice and this notice are preserved.
1224 version-control: never