gas/ChangeLog

   1 2004-06-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
   2
   3         Bug gas/213
   4         * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
   5         labels.  Fix warning.
   6
   7 2004-05-28  DJ Delorie  <dj@redhat.com>
   8
   9         * config/tc-mn10300.h (tc_fix_adjustable): Define.
  10         * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
  11         or non-merged symbols.
  12
  13 2004-05-28  H.J. Lu  <hongjiu.lu@intel.com>
  14
  15         * config/tc-ia64.c (remove_marked_resource): Save, clear and
  16         restore the old slot when inserting srlz.i/srlz.d.
  17
  18 2004-05-28  Andrew Stubbs <andrew.stubbs@superh.com>
  19
  20         * Makefile.am: Regenerate dependecies.
  21         * Makefile.in: Regenerate.
  22         * config/tc-sh.c (valid_arch): Make unsigned.
  23         (preset_target_arch): Likewise.
  24         (md_begin): Use new architecture flags system.
  25         (get_specific): Likewise.
  26         (assemble_ppi): Likewise.
  27         (md_assemble): Likewise. Also fix error check for bad opcodes.
  28         (md_parse_option): Likewise. Also generate -isa values according
  29         to the table in bfd/cpu-sh.c instead of just constants. Also
  30         allow <arch>-up ISA variants.
  31         (sh_elf_final_processing): Replace if-else chain with a call to
  32         sh_find_elf_flags().
  33         * testsuite/gas/sh/arch: New directory.
  34         * testsuite/gas/sh/arch/arch.exp: New test script.
  35         * testsuite/gas/sh/arch/arch_expected.txt: New file.
  36         * testsuite/gas/sh/arch/sh.s: New file.
  37         * testsuite/gas/sh/arch/sh2.s: New file.
  38         * testsuite/gas/sh/arch/sh-dsp.s: New file.
  39         * testsuite/gas/sh/arch/sh2e.s: New file.
  40         * testsuite/gas/sh/arch/sh3-nommu.s: New file.
  41         * testsuite/gas/sh/arch/sh3.s: New file.
  42         * testsuite/gas/sh/arch/sh3-dsp.s: New file.
  43         * testsuite/gas/sh/arch/sh3e.s: New file.
  44         * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
  45         * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
  46         * testsuite/gas/sh/arch/sh4.s: New file.
  47         * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
  48         * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
  49         * testsuite/gas/sh/arch/sh4a.s: New file.
  50
  51 2004-05-28  Peter Barada <peter@the-baradas.com>
  52
  53         * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
  54         with zero offset into mode 2 addressing to save a word.
  55
  56 2004-05-27  H.J. Lu  <hongjiu.lu@intel.com>
  57
  58         * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
  59         (ar_is_only_in_integer_unit): New.
  60         (ar_is_only_in_memory_unit): New.
  61         (generate_unwind_image): Silence gcc on 32bit host.
  62         (md_assemble): Use ar_is_only_in_integer_unit instead of
  63         ar_is_in_integer_unit. Check AR access.
  64
  65 2004-05-27  Peter Barada  <peter@the-baradas.com>
  66
  67         * config/tc-m68k.c (md_begin): Sort the opcode table into
  68         alphabetical order.
  69         (m68k_compare_opcode): New function to do the sorting.
  70
  71 2004-05-24  Peter Barada  <peter@the-baradas.com>
  72
  73         * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
  74         addressing on MIT style operands.
  75         * config/m68k-parse.y(yylex): Allow '-&' for predecrement
  76         w/mask addressing.
  77         * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
  78         operands.
  79
  80 2004-05-23  Alan Modra  <amodra@bigpond.net.au>
  81
  82         * expr.c (operand, operator): Don't reject '++' and '--'.
  83
  84 2004-05-20  Richard Sandiford  <rsandifo@redhat.com>
  85
  86         * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
  87         dwarf tables.
  88
  89 2004-05-17  Adam Nemet  <anemet@lnxw.com>
  90
  91         * configure.in: Add ppc-*-lynxos*.  Update i386-*-lynxos* to ELF.
  92         * configure: Regenerate.
  93
  94 2004-05-13  Paul Brook  <paul@codesourcery.com>
  95
  96         * dw2gencfi.c (output_cie):  Handle dwarf3 format CIE entries.
  97
  98 2004-05-13  Joel Sherrill <joel@oarcorp.com>
  99
 100         * configure.in (or32-*-rtems*): Switch to elf.
 101         * configure: Regenerate.
 102
 103 2004-05-13  Nick Clifton  <nickc@redhat.com>
 104
 105         * po/fr.po: Updated French translation.
 106
 107 2004-05-11  Nick Clifton  <nickc@redhat.com>
 108
 109         * doc/as.texinfo (Section): Document G and T flags to .section
 110         directive.  Document the extra arguments that the G flag
 111         requires.  Document the #tls flag.
 112
 113 2004-05-11  H.J. Lu  <hongjiu.lu@intel.com>
 114
 115         * subsegs.c (section_symbol): Create a new section symbol if
 116         the existing one doesn't match.
 117         * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
 118
 119 2004-05-07  Richard Sandiford  <rsandifo@redhat.com>
 120
 121         * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
 122         to cope with VR4181A errata MD(1) and MD(4).
 123
 124 2004-05-07  Brian Ford  <ford@vss.fsi.com>
 125
 126         * NEWS: Mention .secrel32 for pe[i]-i386.
 127
 128 2004-05-07  Alexandre Oliva  <aoliva@redhat.com>
 129
 130         * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
 131         (HANDLE_ALIGN): New.
 132
 133 2004-05-06  Daniel Jacobowitz  <dan@debian.org>
 134
 135         * Makefile.am (DIST_SUBDIRS): Define.
 136         * aclocal.m4: Regenerate with automake 1.8.4.
 137         * Makefile.in: Likewise.
 138         * doc/Makefile.in: Likewise.
 139
 140 2004-05-06  David Mosberger-Tang  <davidm@hpl.hp.com>
 141
 142         * config/tc-ia64.c (dot_serialize): Declare.
 143         (dot_serialize): New function.
 144         (md_pseudo_table): Add ".serialize.data" and
 145         ".serialize.instruction" directives.
 146
 147 2004-05-06  Nick Clifton  <nickc@redhat.com>
 148
 149         * messages (as_internal_value_out_of_range): Print a message about
 150         a value being out of range.  Be consistent about whether the
 151         values are printed in decimal or hexadecimal.
 152         (as_warn_value_out_of_range): Generate a warning message about an
 153         out of range value.
 154         (as_bad_value_out_of_range): Generate an error message about an
 155         out of range value.
 156         * as.h: Prototype the new functions.
 157         * config/tc-alpha.c (insert_operand): Use new function.
 158         * config/tc-arc.c (arc_insert_operand): Likewise.
 159         * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
 160         * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
 161         * config/tc-ppc.c (ppc_insert_operand): Likewise.
 162         * config/tc-s390.c (s390_insert_operand): Likewise.
 163         * config/tc-v850.c (v850_insert_operand): Likewise.
 164
 165 2004-05-05  Alexandre Oliva  <aoliva@redhat.com>
 166
 167         * configure.in: Set em=linux for frv-*-*linux*.
 168         * configure: Rebuilt.
 169         * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
 170         (frv_md_fdpic_enabled): New.
 171         * config/tc-frv.c (frv_md_fdpic_enabled): New.
 172         (DEFAULT_FDPIC): New.
 173         (frv_flags): Use DEFAULT_FDPIC.
 174         (frv_pic_flag): Likewise.
 175         (OPTION_NOPIC): New.
 176         (md_longopts): Add -mnopic.
 177         (md_parse_option): Handle it.
 178         (md_show_usage): Add -mfdpic and -mnopic.
 179
 180 2004-05-05  Peter Barada  <peter@the-baradas.com>
 181
 182         * config/tc-m68k.c: Add find_cf_chip to print list of valid
 183         chips for invalid coldfire instructions, rename selectors
 184         for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
 185         add current_chip to track which chip is referred to(including save/restore),
 186         use current_chip to select control registers, not current_arch.
 187         (md_show_usage): Add new chips.
 188         * doc/c-m68k.texi: Document new command line switches.
 189
 190 2004-05-05  Jakub Jelinek  <jakub@redhat.com>
 191
 192         * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
 193         (NOP_OPCODE): Define.
 194         (s390_align_code): Remove prototype.
 195         * tc-s390.c (s390_align_code): Remove.
 196
 197 2004-05-04  H.J. Lu  <hongjiu.lu@intel.com>
 198
 199         * config/tc-ia64.c (make_unw_section_name): Removed.
 200         (start_unwind_section): New function.
 201         (generate_unwind_image): Take const segT instead of const
 202         char *.
 203         (dot_handlerdata): Adjusted.
 204         (dot_endp): Likewise.
 205
 206 2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>
 207
 208         * config/obj-elf.c (obj_elf_change_section): Allow the
 209         ".note.GNU-stack" section has SHF_EXECINSTR.
 210
 211 2004-05-02  H.J. Lu  <hongjiu.lu@intel.com>
 212
 213         * config/obj-elf.c (get_section): Return bfd_boolean.
 214         (obj_elf_change_section): Call bfd_get_section_by_name_if
 215         instead of bfd_map_over_sections.
 216
 217 2004-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 218
 219         * config/obj-elf.c (get_section): New function.
 220         (obj_elf_change_section): Support multiple sections with same
 221         name.
 222
 223 2004-04-30  Nick Clifton  <nickc@redhat.com>
 224
 225         * config/tc-arm.c (create_register_alias): Fix typo checking for
 226         case sensitive register aliases.
 227         (co_proc_number): Use error message string in all_reg_maps[]
 228         array.
 229         (cp_reg_required_here): Likewise.
 230         (fp_reg_required_here): Likewise.
 231
 232 2004-04-29  Brian Ford  <ford@vss.fsi.com>
 233
 234         * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
 235
 236 2004-04-28  Chris Demetriou  <cgd@broadcom.com>
 237
 238         * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
 239         (load_address, macro, mips_ip, md_parse_option)
 240         (mips_force_relocation, mips_validate_fix, md_apply_fix3)
 241         (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
 242         embedded-PIC handling, and update comments.
 243         (SWITCH_TABLE): Remove.
 244         * config/tc-mips.h (DIFF_EXPR_OK): Delete.
 245         (enum mips_pic_level): Remove EMBEDDED_PIC.
 246         (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
 247         (TC_FORCE_RELOCATION): Update comment.
 248         * ecoff.c (ecoff_build_lineno): Add comment about some code that
 249         might be safe to remove now that MIPS embedded-PIC is gone.
 250
 251 2004-04-28  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
 252
 253         * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
 254         call to obj_set_subsection_attributes.
 255         (obj_som_init_stab_section): Likewise.
 256         * config/tc-hppa.c (default_subspace_dict): Add comdat field.
 257         (pa_def_subspaces): Provide comdat default.
 258         (pa_subspace): Handle new "comdat" parameter.  Set SEC_LINK_ONCE and
 259         not SEC_IS_COMMON if section is comdat, common or dup_common.  Update
 260         calls to create_new_subspace and update_subspace to pass comdat flag.
 261         (create_new_subspace, update_subspace): Add new comdat argument.  Use
 262         it in calls to obj_set_subsection_attributes.
 263         * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
 264         and use of comdat, common and dup_comm parameters.
 265
 266 2004-04-26  H.J. Lu  <hongjiu.lu@intel.com>
 267
 268         * config/obj-elf.c (obj_elf_change_section): Check if the old
 269         group name is NULL before comparison.
 270
 271 2004-04-23  Chris Demetriou  <cgd@broadcom.com>
 272
 273         * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
 274
 275 2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 276
 277         * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
 278
 279 2004-04-23  Chris Demetriou  <cgd@broadcom.com>
 280
 281         * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
 282         (OPTION_MEMBEDDED_PIC): Remove.
 283         (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
 284         (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
 285         (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
 286         (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
 287         (OPTION_ELF_BASE): Renumber.
 288         (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
 289         (md_show_usage): Remove mention of -membedded-pic.
 290         * doc/as.texinfo: Remove mention of -membedded-pic.
 291
 292 2004-04-23  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 293
 294         * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
 295         * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
 296         a.out support.
 297         (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
 298         s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
 299         USE_GLOBAL_POINTER_OPT.
 300
 301 2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 302
 303         * config/tc-mips.c (macro): One more use of load_delay_nop.
 304
 305 2004-04-22  Atsushi Nemoto  <anemo@mba.ocn.ne.jp>
 306
 307         * config/tc-mips.c (load_delay_nop): New function.
 308         (load_address, macro): Use load_delay_nop() to build a nop
 309         which can be omitted with gpr_interlocks.
 310
 311 2004-04-22  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 312
 313         * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
 314         cop_interlocks): Remove superfluous CPU entries.
 315
 316 2004-04-22  Paul Brook  <paul@codesourcery.com>
 317
 318         * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
 319
 320 2004-04-22  Peter Barada <peter@the-baradas.com>
 321
 322         * NEWS: Added support for EMAC instructions and MAC/EMAC
 323         Motorola syntax.
 324         * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
 325         scale factor tokens, trailing_ampersand to mark mask addressing
 326         for MAC/EMAC instructions.
 327         * config/m68k-parse.y: Add options_ampersand clause, '<<',
 328         '>>'.
 329         (yylex): Handle '>', '<', and '&' following '+'.
 330         * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
 331         architectures in archs[].
 332         (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
 333         for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
 334         respectively.
 335         (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
 336         (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
 337         cases.
 338         Add EMAC operands to init_table[].
 339
 340 2004-04-22  Bruno De Bus <bdebus@elis.ugent.be>
 341
 342         * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
 343         state.
 344         (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
 345         * config/tc-arm.c (enum mstate): Delete from here.
 346         (mapping_state): Remove the static mapstate variable and instead
 347         store the state in the segment.  This allows a per-section mapping
 348         state.  Handle and ignore MAP_UNDEFINED states.
 349         (arm_elf_change_section): Get the current mapping state from the
 350         new section.
 351         (s_ltorg): Set the mapping state to MAP_DATA.
 352         (arm_cleanup): Use arm_elf_change_section to get the mapping state
 353         for each pool as it is emitted.
 354
 355 2004-04-22  Nick Clifton  <nickc@redhat.com>
 356
 357         * config/tc-arm.h: Formatting tidy ups.
 358
 359 2004-04-20  Chris Demetriou  <cgd@broadcom.com>
 360
 361         * NEWS: Note that MIPS -membedded-pic option is deprecated.
 362
 363 2004-04-20  DJ Delorie  <dj@redhat.com>
 364
 365         * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
 366         * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
 367         [TE_PE] (O_secrel): Define.
 368         [TE_PE] (x86_pe_cons_fix_new): New.
 369         [TE_PE] (pe_directive_secrel): Likewise.
 370         (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
 371
 372 2004-04-19  Eric Christopher  <echristo@redhat.com>
 373
 374         * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
 375         of previous patch for fix in gcc.
 376
 377 2004-04-19  Jakub Jelinek  <jakub@redhat.com>
 378
 379         * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
 380
 381 2004-04-19  Nathan Sidwell  <nathan@codesourcery.com>
 382
 383         * read.c (do_align): Call md_flush_pending_output, if defined.
 384
 385 2004-04-16  Alan Modra  <amodra@bigpond.net.au>
 386
 387         * expr.c (operand): Correct checks for ++ and --.
 388
 389 2004-04-14  H.J. Lu  <hongjiu.lu@intel.com>
 390
 391         * config/tc-generic.c: Add some comments.
 392
 393 2004-04-14  Richard Sandiford  <rsandifo@redhat.com>
 394
 395         * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
 396         -{no-}mfix-vr4122-bugs.
 397         * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
 398         (append_insn, mips_emit_delays): Update accordingly.
 399         (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
 400         (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
 401         (md_parse_option): Update after above changes.
 402         (md_show_usage): Add -mfix-vr4120.
 403
 404 2004-04-13  Bob Wilson  <bob.wilson@acm.org>
 405
 406         * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
 407         of .section directive; add a reference to the ELF .subsection
 408         directive.
 409
 410 2004-04-13  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
 411
 412         * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
 413         in parallel.
 414
 415 2004-04-11  Thiemo Seufer  <seufer@csv.ica.uni-stuttgart.de>
 416
 417         * Makefile.am: Remove mips from aout targets.
 418         * Makefile.in: Regenerate.
 419         * configure.in: Remove mips-dec-bsd* target.
 420         * configure: Regenerate.
 421
 422 2004-04-07  Alan Modra  <amodra@bigpond.net.au>
 423
 424         PR 96
 425         * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
 426         to struct map_bfd.  Adjust MAP macro, and define MAP32, MAP64.
 427         Update "mapping".  Restrict some @ modifiers to 32 bit.
 428
 429 2004-04-01  Asgari Jinia  <asgarij@kpitcummins.com>
 430             Dhananjay Deshpande <dhananjayd@kpitcummins.com>
 431
 432         * config/tc-sh.c (dont_adjust_reloc_32): New variable.
 433         (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
 434         dont_adjust_reloc_32 is set.
 435         (md_longopts): Add option -renesas.
 436         (md_parse_option, md_show_usage): Likewise.
 437         * doc/c-sh.texi: Likewise.
 438
 439 2004-04-01  Dave Korn  <dk@artimi.com>
 440
 441         * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
 442         hi16 and lo16 fixS structs.
 443         (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
 444         exactly the same way as for RELOC_DLX_REL16.
 445         (machine_ip): properly respect LO flag in the_insn and
 446         output RELOC_DLX_LO16 rather than RELOC_DLX_16.
 447         (md_apply_fix3): apply RELOC_DLX_LO16.
 448
 449 2004-03-30  Stan Shebs  <shebs@apple.com>
 450
 451         Remove long-obsolete MPW support.
 452         * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
 453         * configure.in: Remove mention of ppc-*-mpw* config.
 454         * configure.in: Likewise.
 455
 456 2004-03-30  Nick Clifton  <nickc@redhat.com>
 457
 458         * config/tc-arm.c (meabi_flags): Make its use conditional upon
 459         OBJ_ELF being defined.
 460
 461 2004-03-27  Alan Modra  <amodra@bigpond.net.au>
 462
 463         * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
 464
 465 2004-03-23  Paul Brook  <paul@codesourcery.com>
 466
 467         * config/tc-arm.c (meabi_flags): New variable.
 468         (arm_parse_eabi): New function.
 469         (md_begin): Set flags for EABI v3.
 470         (arm_eabis): Add.
 471         (arm_long_opts): Add meabi.
 472         * doc/as.texinf <ARM>: Document -meabi.
 473         * doc/c-arm.texi: Ditto.
 474
 475 2004-03-22  Bob Wilson  <bob.wilson@acm.org>
 476
 477         * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
 478         tables even when use_literal_section flag is not set.
 479
 480 2004-03-22  Alan Modra  <amodra@bigpond.net.au>
 481
 482         * config/tc-sh.c: Remove trailing whitespace.
 483
 484 2004-03-22  Hans-Peter Nilsson  <hp@axis.com>
 485
 486         * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
 487         --mul-bug-abort and the default behavior.
 488         * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
 489         (err_for_dangerous_mul_placement): New variable.
 490         (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
 491         macros.
 492         (md_cris_relax_table): Have placeholder for STATE_MUL.
 493         (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
 494         (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
 495         case doing nothing.
 496         (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
 497         STATE_BYTE)>: Ditto.
 498         (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
 499         alignment and position of this frag, emit error message if
 500         suspicious.
 501         (md_assemble): For a multiply insn and when checking it,
 502         transform the current frag into a special frag for that purpose.
 503         (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
 504         OPTION_MULBUG_ABORT_ON>: Handle new options.
 505
 506 2004-03-19  Bob Wilson  <bob.wilson@acm.org>
 507
 508         * config/tc-xtensa.c (mark_literal_frags): New function.
 509         (xtensa_move_literals): Call mark_literal_frags for all literal
 510         segments, including init and fini literal segments.
 511         (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
 512
 513 2004-03-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
 514
 515         * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
 516         (pa_comm): Set BSF_OBJECT in symbol flags.
 517
 518 2004-03-19  Alan Modra  <amodra@bigpond.net.au>
 519
 520         * Makefile.am: Run "make dep-am".
 521         * Makefile.in: Regenerate.
 522         * doc/Makefile.in: Regenerate.
 523         * config.in: Regenerate.
 524         * po/gas.pot: Regenerate.
 525
 526 2004-03-18  Nathan Sidwell  <nathan@codesourcery.com>
 527
 528         * read.c (read_a_source_file): Use demand_empty_rest_of_line.
 529         (demand_empty_rest_of_line): Issue an error here.
 530         (ignore_rest_of_line): Silently skip to end.
 531         (demand_copy_string): Issue an error, not warning.
 532         (equals): Likewise.
 533         * config/obj-elf.c (obj_elf_section_name): Likewise.
 534         (obj_elf_section): Likewise.
 535         * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
 536         (arc_extinst): Likewise.
 537         * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
 538         (dot_spill): Likewise.
 539         (dot_unwabi): Likewise.
 540         (dot_prologue): Likewise.
 541
 542         * expr.c (operand): Reject ++ and --.
 543         (operator): Likewise.
 544
 545 2004-03-17  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 546
 547         * config/tc-sh.c: Include dw2gencfi.h.
 548         (sh_cfi_frame_initial_instructions): New function.
 549         (sh_regname_to_dw2regnum): Likewise.
 550         * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
 551         file.
 552         (TARGET_USE_CFIPOP): Define.
 553         (tc_cfi_frame_initial_instructions): Likewise.
 554         (tc_regname_to_dw2regnum): Likewise.
 555         (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
 556         * Makefile.am: Update dependencies.
 557         * Makefile.in: Regenerate.
 558
 559 2004-03-17  Ralf Corsepius <corsepiu@faw.uni-ulm.de>
 560
 561         * configure.in: Switch sh-*-rtems* to ELF.  Add sh-*-rtemscoff*.
 562         * configure: Regenerate.
 563
 564 2004-03-12  Bob Wilson  <bob.wilson@acm.org>
 565
 566         * read.c (s_leb128): Call md_flush_pending_output.
 567
 568 2004-03-12  Michal Ludvig  <mludvig@suse.cz>
 569
 570         * config/tc-i386.c (output_insn): Handle PadLock instructions.
 571         * config/tc-i386.h (CpuPadLock): New define.
 572         (CpuUnknownFlags): Added CpuPadLock.
 573
 574 2004-03-07  Andreas Schwab  <schwab@suse.de>
 575
 576         * doc/c-hppa.texi (HPPA Directives): Fix typo.
 577
 578 2004-03-07  Richard Henderson  <rth@redhat.com>
 579
 580         * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
 581         (cfi_finish): Likewise for fde.
 582
 583 2004-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 584
 585         * config/tc-ia64.c (md_assemble): Properly handle NULL
 586         align_frag.
 587         (ia64_handle_align): Don't abort if failed to add a stop bit.
 588
 589 2004-03-04  H.J. Lu  <hongjiu.lu@intel.com>
 590
 591         * Makefile.in: Regenerated.
 592         * aclocal.m4: Likewise.
 593         * configure: Likewise.
 594         * doc/Makefile.in: Likewise.
 595
 596 2004-03-03  H.J. Lu  <hongjiu.lu@intel.com>
 597
 598         * config/tc-ia64.c (dot_align): New.
 599         (ia64_do_align): Make it static.
 600         (md_pseudo_table): Use "dot_align" for "align".
 601         (ia64_md_do_align): Don't set align_frag here.
 602         (ia64_handle_align): Add a stop bit to the previous bundle if
 603         needed.
 604
 605         * config/tc-ia64.h (ia64_do_align): Removed.
 606
 607 2003-03-03  Andrew Stubbs  <andrew.stubbs@superh.com>
 608
 609         * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
 610         -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
 611         (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
 612         the most general type or the user specifically requested it.
 613         (md_assemble): Add a new error message for when an instruction
 614         is understood, but is not allowed due to an -isa option.
 615
 616 2004-03-02  H.J. Lu  <hongjiu.lu@intel.com>
 617
 618         * config/tc-ia64.c (align_frag): New.
 619         (md_assemble): Set the tc_frag_data field in align_frag for
 620         IA64_OPCODE_FIRST instructions.
 621         (ia64_md_do_align): Set align_frag.
 622         (ia64_handle_align): Add a stop bit if needed.
 623
 624         * config/tc-ia64.h (TC_FRAG_TYPE): New.
 625         (TC_FRAG_INIT): New.
 626
 627 2004-03-01  Richard Sandiford  <rsandifo@redhat.com>
 628
 629         * config/tc-frv.c (fr400_audio): New variable.
 630         (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
 631         (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
 632         (target_implements_insn_p): New function.
 633         (md_assemble): Report an error if the processor doesn't implement
 634         the instruction.
 635
 636 2004-02-27  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
 637
 638         * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
 639         (md_parse_option): Ditto.
 640         (OPTION_NO_SPECIAL_M32R): Added.
 641         (md_show_usage): Document it.
 642         (enable_speial_m32r): Changed a default value from 0 to 1.
 643         * doc/c-m32r.texi: Document the -no-bitinst option.
 644
 645 2004-02-27  Nick Clifton  <nickc@redhat.com>
 646
 647         * config/tc-sh.c (get_operand): Revert previous delta.
 648         (tc_gen_reloc): Check for an unknown reloc type before processing
 649         the addend.
 650
 651 2004-02-27  Hannes Reinecke  <hare@suse.de>
 652
 653         * config/tc-s390.c (s390_insn): Correct range check for opcode in
 654         .insn pseudo operation.
 655
 656 2004-02-27  Anil Paranjpe  <anilp1@kpitcummins.com>
 657
 658         * config/tc-sh.c (get_operand):  In case of #Imm, check has been
 659         added for wrong syntax.
 660
 661 2004-02-26  Eric Christopher  <echristo@redhat.com>
 662
 663         * config/tc-mips.c (mips_dwarf2_addr_size): New.
 664         * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
 665
 666 2004-02-26  Andrew Stubbs <andrew.stubbs@superh.com>
 667
 668         * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
 669         nibble types to assembler.
 670
 671 2004-02-25  Fred Fish  <fnf@redhat.com>
 672
 673         * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
 674
 675 2004-02-20  James E Wilson  <wilson@specifixinc.com>
 676
 677         * config/tc-ia64.c (slot_index): New arg before_relax.  Use instead of
 678         finalize_syms.
 679         (fixup_unw_records): New arg before_relax.  Pass to slot_index.
 680         (ia64_estimate_size_before_relax): New.
 681         (ia64_convert_frag): Pass 0 to fixup_unw_records.  Add comment.
 682         (generate_unwind_image): Pass 1 to fixup_unw_records.
 683         * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
 684         (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
 685
 686 2004-02-19  Jakub Jelinek  <jakub@redhat.com>
 687
 688         * stabs.c (generate_asm_file): Avoid warning about use of
 689         uninitialized variable.
 690
 691 2004-02-18  David Mosberger  <davidm@hpl.hp.com>
 692
 693         * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
 694         body, and endp, allow unwind records which do not have a "t"
 695         (time/instruction) field.
 696
 697 2004-02-17  Petko Manolov  <petkan@nucleusys.com>
 698
 699         * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
 700         (do_mav_dspsc_2): Likewise.
 701         Fix accumulator registers move opcodes.
 702
 703 2004-02-13  Hannes Reinecke  <hare@suse.de>
 704             Jakub Jelinek  <jakub@redhat.com>
 705
 706         * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
 707
 708 2004-02-10  Steve Ellcey  <sje@cup.hp.com>
 709
 710         * config/tc-ia64.h (ia64_frob_symbol): New declaration.
 711         (tc_frob_symbol): New macro definition.
 712         * config/tc-ia64.c (ia64_frob_symbol): New routine.
 713
 714 2004-02-09  Daniel Jacobowitz  <drow@mvista.com>
 715
 716         * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
 717         read-only.
 718
 719 2004-02-09  Nathan Sidwell  <nathan@codesourcery.com>
 720
 721         * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
 722         (TC_CASE_SENSITIVE): ... this.
 723         * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
 724         * doc/internals.texi (TC_CASE_SENSITIVE): Document.
 725
 726 2004-02-06  James E Wilson  <wilson@specifixinc.com>
 727
 728         * config/tc-ia64.c (dot_endp): Delete call to output_endp.
 729         (generate_unwind_image): Re-add it here.
 730
 731 2004-02-06  Nathan Sidwell  <nathan@codesourcery.com>
 732
 733         * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
 734         * read.h (SKIP_WHITESPACE): Turn into an expression.
 735         * read.c (read_a_source_file): A pseudo is removed by having a
 736         NULL handler.
 737
 738 2004-02-05  James E Wilson  <wilson@specifixinc.com>
 739
 740         * config/tc-ia64.c (output_endp): New.
 741         (count_bits): Delete.
 742         (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
 743         endp unwind records.
 744         (fixup_unw_records): Handle endp unwind records.  Delete code for
 745         shortening prologue regions not followed by a body record.
 746         (dot_endp): Call add_unwind_entry to emit endp unwind record.
 747         * config/tc-ia64.h (unw_record_type): Add endp.
 748
 749 2004-02-03  James E Wilson  <wilson@specifixinc.com>
 750
 751         * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
 752         fill padding bytes with zeroes.
 753         (emit_one_bundle): New locals last_ptr, end_ptr.  Rewrite code that
 754         sets unwind_record slot_number and slot_frag fields.
 755
 756 2004-02-02  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 757
 758         * config/tc-mips.c (add_got_offset_hilo): New function.
 759         (macro): Use load_register() and add_got_offset_hilo() to load
 760         constants instead of hardcoding code sequences throughout.
 761
 762 2004-01-28  H.J. Lu  <hongjiu.lu@intel.com>
 763
 764         * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
 765
 766 2004-01-26  Bernardo Innocenti  <bernie@develer.com>
 767
 768         * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
 769         like m68k-elf.
 770         * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
 771         of hard-coded test for TARGET_OS=elf.
 772
 773 2004-01-24  Chris Demetriou  <cgd@broadcom.com>
 774
 775         * config/tc-mips.c (hilo_interlocks): Change definition
 776         so that MIPS32, MIPS64 and later ISAs are included, along with
 777         the already-included machines.  Update comments.
 778
 779 2004-01-23  Daniel Jacobowitz  <drow@mvista.com>
 780
 781         * config/tc-arm.c (tc_gen_reloc): Improve error message for
 782         undefined local labels.
 783
 784 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 785
 786         * config/tc-mips.c (load_address, macro): Update comments about
 787         NewABI GP relaxation.
 788
 789 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 790
 791         * config/tc-mips.c (macro_build): Remove place and counter arguments.
 792         (mips_build_lui, macro_build_ldst_constoffset): Likewise.
 793         (mips16_macro_build, macro_build_jalr): Remove counter argument.
 794         (set_at, load_register, load_address, move_register): Likewise.
 795         (load_got_offset, add_got_offset): Likewise.
 796         Update all calls and tidy accordingly.
 797
 798 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 799
 800         * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
 801         (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
 802         (RELAX_USE_SECOND): Bump to 0x10000.
 803         (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
 804         (mips_macro_warning): New variable.
 805         (md_assemble): Wrap macro expansion in macro_start() and macro_end().
 806         (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
 807         (relax_close_frag): Set mips_macro_warning.first_frag.  Adjust use
 808         of RELAX_ENCODE.
 809         (append_insn): Update mips_macro_warning.sizes.
 810         (macro_start, macro_warning, macro_end): New functions.
 811         (macro_build): Don't emit warnings here.
 812         (macro_build_lui, md_estimate_size_before_relax): ...or here.
 813         (md_convert_frag): Check for cases where one macro alternative
 814         needs a warning and the other doesn't.  Emit a warning if the
 815         longer sequence was chosen.
 816
 817 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 818
 819         * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
 820         * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
 821         the first sequence, the size of the second sequence, and a flag
 822         that says whether we should warn.
 823         (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
 824         (RELAX_FIRST, RELAX_SECOND): New.
 825         (mips_relax): New variable.
 826         (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
 827         (append_insn): Remove "place" argument.  Use mips_relax.sequence
 828         rather than "place" to check whether we're expanding the second
 829         alternative of a relaxable macro.  Remove redundant check for
 830         branch relaxation.  If generating a normal insn, and there
 831         is not enough room in the current frag, call relax_close_frag()
 832         to close it.  Update mips_relax.sizes[].  Emit fixups for the
 833         second version of a relaxable macro.  Record the first relaxable
 834         fixup in mips_relax.  Remove tc_gen_reloc workaround.
 835         (macro_build): Remove all uses of "place".  Use mips_relax.sequence
 836         in the same way as in append_insn.
 837         (mips16_macro_build): Remove "place" argument.
 838         (macro_build_lui): As for macro_build.  Don't drop the add_symbol
 839         when generating the second version of a relaxable macro.
 840         (load_got_offset, add_got_offset): New functions.
 841         (load_address, macro): Use new relaxation machinery.  Remove
 842         tc_gen_reloc workarounds.
 843         (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
 844         version of a relaxable macro is needed.  Return -RELAX_SECOND if the
 845         first version is needed.
 846         (tc_gen_reloc): Remove relaxation handling.
 847         (md_convert_frag): Go through the fixups for a relaxable macro and
 848         mark those that belong to the unneeded alternative as done.  If the
 849         second alternative is needed, adjust the fixup addresses to account
 850         for the deleted first alternative.
 851
 852 2004-01-23  Richard Sandiford  <rsandifo@redhat.com>
 853
 854         * frags.h (frag_room): Declare.
 855         * frags.c (frag_room): New function.
 856         * doc/internals.texi: Document it.
 857
 858 2004-01-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 859
 860         * config/tc-mips.c (append_insn): Don't do r3900 interlock
 861         optimization for -mtune=r3900, as this will break on other CPUs.
 862
 863 2004-01-11  Tom Rix   <tcrix@worldnet.att.net>
 864
 865         * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
 866         be relaxed, use fixup.
 867         (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
 868
 869 2004-01-19  Jakub Jelinek  <jakub@redhat.com>
 870
 871         * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
 872         precision operands.
 873
 874 2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 875
 876         * config/tc-mips.c (append_insn): Properly detect variant frags
 877         that preclude swapping of relaxed branches.  Correctly swap
 878         instructions between frags when dealing with relaxed branches.
 879
 880 2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 881
 882         * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
 883         throughout.
 884         * aclocal.m4: Regenerate.
 885         * configure: Regenerate.
 886
 887 2004-01-12  Anil Paranjpe  <anilp1@KPITCummins.com>
 888
 889         * config/tc-h8300.c (build_bytes): Apply relaxation to bit
 890         manipulation insns.
 891
 892 2004-01-12  Richard Sandiford  <rsandifo@redhat.com>
 893
 894         * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
 895         reloc, reserve space for the delay slot as well as the jalr itself.
 896
 897 2004-01-09  Paul Brook  <paul@codesourcery.com>
 898
 899         * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
 900         (do_vfp_sp2_from_reg2): New function.
 901         (insns): Use them.
 902         (do_vfp_dp_from_reg2): Check return values properly.
 903
 904 2004-01-08  Ian Lance Taylor  <ian@wasabisystems.com>
 905
 906         * config/tc-mips.c (warn_nops): Remove static variable.
 907         (macro): Remove test of warn_nops.
 908         (md_shortops): Remove 'n'.
 909         (md_parse_option): Remove 'n' case.
 910         (md_show_usage): Remove -n.
 911         * doc/as.texinfo (Overview): Remove MIPS -n option.
 912         * doc/c-mips.texi (MIPS Opts): Remove mention -n.
 913         * NEWS: Mention removal of MIPS -n option.
 914
 915         * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
 916         (cop_interlocks): Check ISA level.
 917         (cop_mem_interlocks): Define.
 918         (reg_needs_delay): Check cop_interlocks rather than
 919         ISA_HAS_COPROC_DELAYS.
 920         (append_insn): Likewise.  Use cop_mem_interlocks rather than
 921         directly checking mips_opts.isa.
 922         (mips_emit_delays): Likewise.
 923
 924 2004-01-07  H.J. Lu  <hongjiu.lu@intel.com>
 925
 926         * config/tc-ia64.c (unwind): Move next_slot_number and
 927         next_slot_frag to ...
 928         (unw_rec_list): Here.
 929         (free_list_records): Removed.
 930         (output_unw_records): Likewise.
 931         (generate_unwind_image): Make it void.
 932         (alloc_record): Initialize next_slot_number and next_slot_frag.
 933         (slot_index): Take .org, .space and .align into account.
 934         (fixup_unw_records): Don't set slot_number to 0. Use
 935         list->next_slot_number and list->next_slot_frag instead of
 936         unwind.next_slot_number and unwind.next_slot_frag.
 937         (ia64_convert_frag): New.
 938         (generate_unwind_image): Generate a rs_machine_dependent frag
 939         for unwind record.
 940         (emit_one_bundle): Use list->next_slot_number and
 941         list->next_slot_frag instead of unwind.next_slot_number and
 942         unwind.next_slot_frag.
 943
 944         * config/tc-ia64.h (md_convert_frag): Defined as
 945         ia64_convert_frag.
 946         (md_estimate_size_before_relax): Defined as (f)->fr_var.
 947
 948 2004-01-06  Alexandre Oliva  <aoliva@redhat.com>
 949
 950         2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
 951         * config/tc-frv.h (md_apply_fix3): Don't define.
 952         * config/tc-frv.c (md_apply_fix3): New.  Shift/truncate %hi/%lo
 953         operands.
 954         * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
 955         2003-10-07  Alexandre Oliva  <aoliva@redhat.com>
 956         * config/tc-frv.c (line_separator_chars): Add `!'.
 957         2003-09-19  Alexandre Oliva  <aoliva@redhat.com>
 958         * config/tc-frv.c (md_assemble): Clear insn upfront.
 959         2003-09-18  Alexandre Oliva  <aoliva@redhat.com>
 960         * config/tc-frv.c (OPTION_FDPIC): New macro.
 961         (md_longopts): Add mfdpic.
 962         (md_parse_option): Handle it.
 963         2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
 964         * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
 965         FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
 966         (frv_pic_ptr): Parse funcdesc.
 967
 968 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 969
 970         * doc/as.texinfo: Let texi2pod parse asconfig.texi and
 971         gasver.texi.  Remove duplicate symbol definitions for texi2pod.
 972
 973 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 974
 975         * Makefile.am (Makefile): Move the dependency on
 976         $(BFDDIR)/configure.in to...
 977         (CONFIG_STATUS_DEPENDENCIES): ... here.
 978         (AUTOMAKE_OPTIONS): Require automake 1.8.
 979         * Makefile.in: Regenerate.
 980         * doc/Makefile.am (BASEDIR, BFDDIR): Define.
 981         (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
 982         $(BFDDIR)/configure.in here as well.
 983         * doc/Makefile.in: Regenerate.
 984
 985 2004-01-05  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 986
 987         * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
 988         * Makefile.in: Regenerate.
 989         * aclocal.m4: Regenerate.
 990         * doc/Makefile.am (install, install-info): Remove.
 991         (install-data-local): A new hook for install-info.
 992         (AUTOMAKE_OPTIONS): Require automake 1.8.
 993         * doc/Makefile.in: Regenerate.
 994
 995 2004-01-02  Nutan Singh <nutan@kpitcummins.com>
 996
 997         * doc/c-sh.texi: Update description about floating point behavior
 998         of SH family.
 999
1000 2004-01-02  Bernardo Innocenti  <bernie@develer.com>
1001
1002         * configure.in: Add m68k-uClinux target.
1003         * configure: Regenerate.
1004
1005 For older changes see ChangeLog-0203
1006 \f
1007 Local Variables:
1008 mode: change-log
1009 left-margin: 8
1010 fill-column: 74
1011 version-control: never
1012 End: