gas/ChangeLog

   1 2011-04-12  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * config/tc-i386.c (i386_mach): Start error message with lower
   4         case.
   5         (md_begin): Likewise.
   6         (md_parse_option): Likewise.
   7         (i386_target_format): Likewise.
   8         (check_byte_reg): Likewise.
   9         (check_long_reg): Likewise.
  10         (check_qword_reg): Likewise.
  11         (check_word_reg): Likewise.
  12
  13 2011-04-12  Nick Clifton  <nickc@redhat.com>
  14
  15         PR gas/12532
  16         * config/tc-arm.c (relax_branch): Do not relax branches to
  17         preemptable global symbols.
  18
  19 2011-04-11  Julian Brown  <julian@codesourcery.com>
  20
  21         * config/tc-arm.c (parse_psr): Add LHS argument. Improve support
  22         for *APSR bitmasks.
  23         (operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
  24         Remove OP_RVC_PSR.
  25         (parse_operands): Likewise.
  26         (do_mrs): Tweak error message for constraint.
  27         (do_t_mrs): Update constraints for changes to APSR support.
  28         (do_t_msr): Likewise. Don't set PSR_f flag here.
  29         (psrs): Remove "g", "nzcvq", "nzcvqg".
  30         (insns): Tweak entries for msr and mrs instructions.
  31
  32 2011-04-11  Kai Tietz  <ktietz@redhat.com>
  33
  34         * config/tc-i386.c (x86_cons): Initialize adjust with zero.
  35
  36 2011-04-11  Nick Clifton  <nickc@redhat.com>
  37
  38         * config/tc-i386.c (x86_cons): Define even for non-ELF targets.
  39         * config/tc-i386.h (x86_cons): Always prototype.
  40
  41         * config/tc-cr16.c (getprocregp_image): Fix type of 'r' parameter
  42         in order to avoid a compile time warning.
  43         (getprocreg_image): Likewise.
  44
  45 2011-04-11  Alan Modra  <amodra@gmail.com>
  46
  47         * config/tc-cr16.c (getprocreg_image): Correct range check.
  48         (getprocregp_image): Likewise.
  49
  50 2011-04-06  Joseph Myers  <joseph@codesourcery.com>
  51
  52         * configure.tgt (strongarm*be, strongarm*b, strongarm*,
  53         xscale*be|xscale*b, xscale*): Remove architectures.
  54         (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
  55         thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
  56
  57 2011-04-01  Tristan Gingold  <gingold@adacore.com>
  58
  59         * config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
  60
  61 2011-03-31  Bernd Schmidt  <bernds@codesourcery.com>
  62
  63         * config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
  64         static variables.
  65         (md_begin): Initialize them.
  66         (s_tic6x_scomm): New static function.
  67         (md_pseudo_table): Add "scomm".
  68         (tc_gen_reloc): Really undo all adjustments made by
  69         bfd_install_relocation.
  70         * doc/c-tic6x.texi: Document the .scomm directive.
  71
  72 2011-03-31  Tristan Gingold  <gingold@adacore.com>
  73
  74         * dwarf2dbg.c (DWARF2_VERSION): Define.
  75         (out_debug_line): Use it.
  76         (out_debug_aranges): Ditto.
  77         (out_debug_info): Ditto.
  78         * config/tc-ia64.h (DWARF2_VERSION): Override it.
  79
  80 2011-03-30  Michael Snyder  <msnyder@vmware.com>
  81
  82         * obj-elf.c (obj_elf_section): Free malloced name.
  83         * macro.c (get_any_string): Free malloced br_buf.
  84         (do_formals): Free 'formal'.
  85
  86 2011-03-30  Tristan Gingold  <gingold@adacore.com>
  87
  88         * config/tc-ppc.c (ppc_frob_symbol): Convert stsym symbols value
  89         to offset only if within is set.
  90         (ppc_stabx): Reformat.  For stsym stabs, add a check and set
  91         within only for symbols.
  92
  93 2011-03-29  Richard Henderson  <rth@redhat.com>
  94
  95         PR 12610
  96         * config/tc-alpha.c (s_alpha_align): Don't auto-align a previous
  97         label; zap alpha_insn_label.
  98
  99 2011-03-29  H.J. Lu  <hongjiu.lu@intel.com>
 100
 101         * config/tc-i386.c (handle_quad): Properly handle multiple
 102         operands.
 103
 104 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 105
 106         * config/bfin-parse.y (BYTEUNPACK): Return yyerror when dest
 107         reg $2 is the same as dest reg $4.
 108
 109 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 110
 111         * config/bfin-parse.y (BYTEOP16M): Return yyerror when dest
 112         reg $2 is the same as dest reg $4.
 113
 114 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * config/bfin-parse.y (BYTEOP16P): Return yyerror when dest
 117         reg $2 is the same as dest reg $4.
 118
 119 2011-03-28  Mike Frysinger  <vapier@gentoo.org>
 120
 121         * config/bfin-parse.y (16bit acc add): Return yyerror when dest
 122         reg $1 is the same as dest reg $7.
 123
 124 2011-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 125
 126         * config/tc-i386.c (handle_quad): New.
 127         (md_pseudo_table): Add "quad".
 128
 129 2011-03-26  John Marino  <binutils@marino.st>
 130
 131         * configure.tgt: Fix support for *-*-dragonfly*.
 132         * config/tc-i386.c: define SVR4_COMMENT_CHARS for dragonfly.
 133         * config/te-dragonfly.h: New file.
 134
 135 2011-03-24  Eric B. Weddington  <eric.weddington@atmel.com>
 136
 137         * config/tc-avr.c (mcu_types): Add new devices: atmega325pa,
 138         atmega3250pa, atmega3290pa, atmega16hvbrevb, atmega32hvbrevb,
 139         at90pwm161.
 140         * doc/c-avr.texi: Document new device names.
 141
 142 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 143
 144         * config/bfin-parse.y (dual 32bit add/sub): Return yyerror when dest
 145         reg $1 is the same as dest reg $7.
 146         (quad 16bit add/sub): Return yyerror when dest reg $1 is the same as
 147         dest reg $7.
 148
 149 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 150
 151         * config/bfin-parse.y (check_macfuncs): Clarify error message when
 152         P is mismatched.  Check destination regno are off by one when P is
 153         set, or are equal when P is not set.
 154
 155 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * config/bfin-parse.y (SEARCH): Return yyerror when dest reg $2 is
 158         the same as dest reg $4.
 159         (BITMUX): Return yyerror when dest reg $3 is the same as dest reg $5.
 160
 161 2011-03-23  Eric B. Weddington  <eric.weddington@atmel.com>
 162
 163         * config/tc-avr.c (mcu_types): Add new xmega devices: atxmega64a1u,
 164         atxmega128a1u, atxmega16x1, atxmega32x1, atxmega128b1, atxmega256a3bu.
 165         * doc/c-avr.texi: Document new device names.
 166
 167 2011-03-22  Eric B. Weddington  <eric.weddington@atmel.com>
 168
 169         * config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
 170         (AVR_INSN): Change definition to match.
 171         (avr_opcodes): Likewise, change to match.
 172         (mcu_types): Add XMEGA architecture names and new XMEGA device names.
 173         (md_show_usage): Add XMEGA architecture names.
 174         (avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
 175         Add support for SPM Z+ instruction.
 176         * doc/c-avr.texi: Add documentation for XMEGA architectures and
 177         devices.
 178
 179 2011-03-21  Eric B. Weddington  <eric.weddington@atmel.com>
 180
 181         * config/tc-avr.c (md_show_usage): Add "Assembler" text to output.
 182
 183 2011-03-18  Alan Modra  <amodra@gmail.com>
 184
 185         * config/obj-elf.c (elf_frob_symbol): Report S_SET_SIZE symbol
 186         on .size expression errors rather than symbols in the size expression.
 187
 188 2011-03-18  Alan Modra  <amodra@gmail.com>
 189
 190         * input-scrub.c (line_numberT): Delete.
 191         (input_scrub_close): Reset line counters.
 192         * messages.c (as_show_where): Don't print invalid line number.
 193         (as_warn_internal, as_bad_internal): Likewise.
 194
 195 2011-03-18  Alan Modra  <amodra@gmail.com>
 196
 197         * read.c (read_a_source_file): Remove md_after_pass_hook.
 198         Move "quit" label before set of dot_symbol.
 199         * config/tc-d10v.h (md_after_pass_hook): Don't define.
 200         * config/tc-d30v.h (md_after_pass_hook): Likewise.
 201         * config/tc-m32r.h (md_after_pass_hook): Likewise.
 202         (md_cleanup): Define to call m32r_fill_insn.
 203
 204 2011-03-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 205
 206         * config/tc-s390.c (md_parse_option): Add -march=all option which
 207         switches to the highest available CPU.
 208
 209 2011-03-17  Alan Modra  <amodra@gmail.com>
 210
 211         PR 12569
 212         * expr.c (operand): Correct passing of "mode" to expr.
 213         * read.c (do_org): Allow expr_section.
 214         (get_known_segmented_expression): Don't assert anything about the
 215         segment.
 216
 217 2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>
 218
 219         * as.c (show_usage): Add --size-check=.
 220         (parse_args): Add and handle OPTION_SIZE_CHECK.
 221
 222         * as.h (flag_size_check): New.
 223
 224         * config/obj-elf.c (elf_frob_symbol): Use as_bad to report
 225         bad .size directive only for --size-check=error.
 226
 227         * doc/as.texinfo: Document --size-check=.
 228
 229 2011-03-14  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * config/tc-bfin.c (bfin_cpus[]): Add 0.4 for
 232         bf542/bf544/bf547/bf548/bf549.
 233
 234 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 235
 236         * config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
 237         determine whether a relocation is needed.
 238         (md_apply_fix, arm_apply_sym_value): Likewise.
 239
 240 2011-03-14  Richard Sandiford  <richard.sandiford@linaro.org>
 241
 242         * config/tc-arm.c (arm_adjust_symtab): Set the branch type
 243         for Thumb symbols.
 244
 245 2011-03-11  Nick Clifton  <nickc@redhat.com>
 246
 247         * remap.c (remap_debug_filename): Always allocate a buffer for the
 248         returned pointer.
 249         * stabs.c (stabs_generate_asm_file): Free the pointer returned by
 250         remap_debug_filename.
 251
 252 2011-03-10  Michael Snyder  <msnyder@vmware.com>
 253
 254         Revert the following change:
 255         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 256         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 257
 258 2011-03-10  Alan Modra  <amodra@gmail.com>
 259
 260         * gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
 261         TARGET_SYMBOL_FIELDS): Don't define.
 262         * gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.
 263
 264 2011-03-09  Michael Snyder  <msnyder@vmware.com>
 265
 266         * dwarf2dbg.c (out_file_list): Free malloced 'dir'.
 267         (out_debug_info): Free malloced 'dirname' and 'comp_dir'.
 268         (emit_fixed_inc_line_addr): Assign instead of conditional in
 269         assert.
 270
 271 2011-03-05  H.J. Lu  <hongjiu.lu@intel.com>
 272
 273         * config/obj-elf.c (elf_frob_symbol): Mention symbol name in
 274         non-constant .size expression.
 275
 276 2011-03-02  Nick Clifton  <nickc@redhat.com>
 277
 278         * ecoff.c: Incldue filenames.h
 279
 280 2011-02-28  Kai Tietz  <kai.tietz@onevision.com>
 281
 282         * depend.c (register_dependency): Use filename_(n)cmp.
 283         * dwarf2dbg.c (get_filenum): Likewise.
 284         * ecoff.c (add_file): Likewise.
 285         (ecoff_generate_asm_lineno): Likewise.
 286         * input-scrub.c (new_logical_line_flags): Likewise.
 287         * listing.c (file_info): Likewise.
 288         (listing_newline): Likewise.
 289         * remap.c (remap_debug_filename): Likewise.
 290         * stabs.c (generate_asm_file): Likewise.
 291         (stabs_generate_asm_lineno): Likewise.
 292
 293 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 294
 295         * config/tc-mips.c (append_insn): Disable branch relaxation for
 296         DSP instructions.
 297
 298 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 299
 300         * config/tc-mips.c (macro): Handle M_PREF_AB.
 301
 302 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 303
 304         * config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
 305         register to use.
 306         (RELAX_BRANCH_UNCOND): Adjust accordingly.
 307         (RELAX_BRANCH_LIKELY): Likewise.
 308         (RELAX_BRANCH_LINK): Likewise.
 309         (RELAX_BRANCH_TOOFAR): Likewise.
 310         (RELAX_BRANCH_AT): New macro.
 311         (append_insn): Encode the temporary register to use in standard
 312         MIPS branch relaxation.
 313         (relaxed_branch_length): Update according to changes to
 314         RELAX_BRANCH_ENCODE.
 315         (md_convert_frag): Use the encoded register as the temporary.
 316
 317 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 318
 319         * config/tc-mips.c (mips_fix_adjustable): On REL targets also
 320         reject PC-relative relocations.
 321
 322 2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>
 323
 324         * config/tc-mips.c (md_convert_frag): Correct message
 325         capitalization.
 326
 327 2011-02-28  Alan Modra  <amodra@gmail.com>
 328
 329         * symbols.c (report_op_error): Remove unnecessary forward declaration.
 330         Add "op" parameter.  Report operator and operand segments in error
 331         message, not operand symbols.
 332         (resolve_symbol_value): Always set segment for equated symbols, not
 333         just when finalizing.  Adjust report_op_error calls.
 334
 335 2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>
 336
 337         * config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
 338         if 64bit relocations aren't allowed.
 339
 340 2011-02-25  Alan Modra  <amodra@gmail.com>
 341
 342         PR gas/12519
 343         * config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
 344
 345 2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>
 346
 347         * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
 348         initialization of offset_reloc.
 349
 350 2011-02-15  Richard Henderson  <rth@redhat.com>
 351
 352         * dw2gencfi.c (dot_cfi_dummy): New.
 353         (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
 354         * read.c (pobegin): Unconditionally call cfi_pop_insert.
 355
 356 2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 357
 358         * configure: Regenerate.
 359
 360 2011-02-13  Mike Frysinger  <vapier@gentoo.org>
 361
 362         * config/bfin-lex.l (BYTEOP2M): Remove tokenization.
 363         * config/bfin-parse.y (BYTEOP2M): Delete token.
 364         (asm_1): Remove BYTEOP2M insn matching.
 365
 366 2011-02-12  Mike Frysinger  <vapier@gentoo.org>
 367
 368         * config/bfin-defs.h: Include opcode/bfin.h.
 369         (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
 370
 371 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
 374         (Modify Registers): Fix subtracted typo.
 375         (.byte2): Extend and swap descriptions with .byte4.
 376         (.byte4): Extend and swap descriptions with .byte2.
 377         (.db, .dw, .dd): Document behavior.
 378
 379 2011-02-11  Mike Frysinger  <vapier@gentoo.org>
 380
 381         * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
 382
 383 2011-02-11  Alan Modra  <amodra@gmail.com>
 384
 385         * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
 386
 387 2011-02-10  Alan Modra  <amodra@gmail.com>
 388
 389         * doc/as.texinfo (Overview): Add missing markup around Blackfin
 390         and PowerPC options.
 391
 392 2011-02-10  Alan Modra  <amodra@gmail.com>
 393
 394         * config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
 395         * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
 396         (Overview <Target PowerPC options>): Add a number of missing options.
 397         * doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.
 398
 399 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 400
 401         PR gas/6957
 402         * config/tc-i386.c (i386_align_code): Use f32_patt when tuning
 403         for i686.
 404
 405 2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 406
 407         * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
 408         for ISA extensions.
 409         (md_parse_option): Likewise.
 410
 411 2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>
 412
 413         * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
 414         * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
 415         (TIC6X Options): Don't mention "-matomic".
 416         * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
 417         (md_longopts): Remove corresponding entries.
 418         (md_parse_option): Don't handle them.
 419         (md_show_usage): Don't document them.
 420         (tic6x_atomic): Delete variable.
 421         (tic6x_update_features): Always copy tic6x_arch_enable to
 422         tic6x_features.
 423         (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
 424         (s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
 425         (md_pseudo_table): Remove ".atomic" and ".noatomic".
 426
 427 2011-01-31  Nick Clifton  <nickc@redhat.com>
 428
 429         * write.c (write_contents): Include output file name and bfd error
 430         value when reporting the inability to write to the output file.
 431         * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
 432         frag that has a non-zero fill value.
 433
 434 2011-01-27  DJ Delorie  <dj@redhat.com>
 435
 436         * config/tc-rx.c (md_convert_frag): If we can't compute the target
 437         address, zero out the values stored in the object file to make
 438         objdump's output consistent.
 439
 440 2011-01-26  Kai Tietz  <kai.tietz@onevision.com>
 441
 442         * config/tc-i386.c (md_begin): Set for x64 windows COFF target
 443         x86_dwarf2_return_column to 32.
 444
 445 2011-01-20  Nick Clifton  <nickc@redhat.com>
 446
 447         PR gas/12384
 448         * config/tc-h8300.c (constant_fits_width_p): Use correct type for
 449         comparison.
 450
 451 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 452
 453         * write.c (compress_debug): Return if section size is smaller
 454         than 32 bytes.
 455
 456 2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>
 457
 458         PR gas/12409
 459         * write.c (compress_debug): Return if section size is 0.
 460
 461 2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>
 462
 463         * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
 464         cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
 465         * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
 466         fmp626} options.
 467
 468 2011-01-18  Nick Clifton  <nickc@redhat.com>
 469
 470         PR gas/12390
 471         * doc/all.texi: Add NS32K
 472         * doc/as.texinfo: Remove target specific details of which
 473         characters act as comment initiators and statement separators into
 474         individual target specific files.
 475         * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
 476         the hash character at the start of a line.
 477         * doc/c-arm.texi (ARM-Chars): Likewise.
 478         * doc/c-avr.texi (AVR-Chars): Likewise.
 479         * doc/c-d10v.texi (D10V-Chars): Likewise.
 480         * doc/c-d30v.texi (D30V-Chars): Likewise.
 481         * doc/c-mmix.texi (MMIX-Chars): Likewise.
 482         * doc/c-s390.texi (s390 characters): Likewise.
 483         * doc/c-sh.texi (SH-Chars): Likewise.
 484         * doc/c-sh64.texi (SH64-Chars): Likewise.
 485         * doc/c-sparc.texi (SPARC-Chars): Likewise.
 486         * doc/c-tic6x.texi (TIC6X Syntax): Likewise.
 487         * doc/c-xtensa.texi (Xtensa Syntax): Likewise.
 488         * doc/c-z80.texi (Z80-Chars): Likewise.
 489         * doc/c-z8k.texi (Z8000-Chars): Likewise.
 490         * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
 491         * doc/c-arc.texi (ARC-Chars): Fill in this subsection.
 492         * doc/c-bfin.texi (Blackfin Syntax): Document line comment and
 493         line separator characters.
 494         * doc/c-cr16.texi (CR16 Syntax): Likewise.
 495         * doc/c-i386.texi (i386-Chars): Likewise.
 496         * doc/c-i860.texi (i860-Chars): Likewise.
 497         * doc/c-i960.texi (i960-Chars): Likewise.
 498         * doc/c-ip2k.texi (IP2K-Chars): Likewise.
 499         * doc/c-lm32.texi (LM32-Chars): likewise.
 500         * doc/c-m32c.texi (M32C-Chars): Likewise.
 501         * doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
 502         * doc/c-m68k.texi (M68K-Chars): Likewise.
 503         * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
 504         * doc/c-msp430.texi (MSP430-Chars): Likewise.
 505         * doc/c-mt.texi (MT-Chars): Likewise.
 506         * doc/c-ns32k.texi (NS32K-Chars): Likewise.
 507         * doc/c-pj.texi (PJ-Chars): Likewise.
 508         * doc/c-ppc.texi (PowerPC-Chars): Likewise.
 509         * doc/c-rx.texi (RX-Chars): Likewise.
 510         * doc/c-score.texi (SCORE-Chars): Likewise.
 511         * doc/c-tic54x.texi (TIC54X-Chars): Likewise.
 512         * doc/c-v850.texi (V850-Chars): Likewise.
 513         * doc/c-vax.texi (VAX-Chars): Likewise.
 514         * doc/c-xc16x.texi (xc16x-Chars): Likewise.
 515
 516 2011-01-17  Quentin Neill  <quentin.neill@amd.com>
 517
 518         * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
 519
 520         * doc/c-i386.texi (i386-TBM): New section.
 521
 522 2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>
 523
 524         * config/tc-i386.c (disallow_64bit_disp): Renamed to ...
 525         (disallow_64bit_reloc): This.
 526         (md_assemble): Don't check movabs for x32 mode here.
 527         (i386_target_format): Updated.
 528         (tc_gen_reloc): Check if 64bit relocations are allowed.
 529
 530 2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>
 531
 532         * config/tc-i386.c (disallow_64bit_disp): New.
 533         (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
 534         X86_64_ABI/X86_64_X32_ABI.
 535         (md_assemble): Don't allow movabs with relocation in x32 mode.
 536         (i386_target_format): Updated.
 537
 538 2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>
 539
 540         * config/tc-i386.c (OPTION_N32): Renamed to ...
 541         (OPTION_X32): This.
 542         (md_longopts): Replace n32 with x32.
 543         (md_parse_option): Updated.
 544         (md_show_usage): Likewise.
 545
 546         * doc/c-i386.texi: Replace --n32 with --x32.
 547
 548 2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>
 549
 550         * config/tc-mips.c (mips_ip): Update error messages.  Take an
 551         unadjusted offset for "+c" argument.
 552
 553 2011-01-10  Nick Clifton  <nickc@redhat.com>
 554
 555         * config/tc-i386.c (x86_elf_abi): Only define for targets that use
 556         it.
 557
 558 2011-01-10  Nick Clifton  <nickc@redhat.com>
 559
 560         * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
 561         part of the file.
 562
 563 2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
 564             Glauber de Oliveira Costa  <glommer@gmail.com>
 565
 566         * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
 567         .tlsdescseq directive.
 568         * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
 569         following a symbol.
 570         (s_arm_tls_descseq): New directive.
 571         (md_pseudo_table): Add it.
 572         (encode_branch): Allow TLS_CALL relocs too.
 573         (do_t_blx, do_t_branch23): Use encode_branch.
 574         (reloc_names): Add tlsdesc and tlscall.
 575         (md_apply_fix): Process tls desc relocations.
 576         (tc_gen_reloc): Likewise.
 577         (arm_fix_adjustable): Likewise.
 578
 579 2011-01-07  Quentin Neill  <quentin.neill@amd.com>
 580
 581         * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
 582
 583         * doc/c-i386.texi (i386-BMI): New section.
 584
 585 2011-01-06  Paul Koning  <ni1d@arrl.net>
 586
 587         * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
 588         references to absolute addresses.
 589
 590 2011-01-05  DJ Delorie  <dj@redhat.com>
 591
 592         * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
 593         instead of an RH_NEG32 one.
 594
 595 2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>
 596
 597         * doc/c-i386.texi: Clarify --n32.
 598
 599 2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>
 600
 601         * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
 602         integer registers in VEX.vvvv.  Check register-only source
 603         operand when two source operands are swapped.  Properly update
 604         destination when two source operands are swapped.
 605
 606 2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>
 607
 608         * gas.c (parse_args): Update copyright to 2011.
 609
 610 For older changes see ChangeLog-2010
 611 \f
 612 Local Variables:
 613 mode: change-log
 614 left-margin: 8
 615 fill-column: 74
 616 version-control: never
 617 End: