1 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
3 * Makefile.am: Run "make dep-am".
4 * Makefile.in: Regenerate.
6 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
8 * configure.in (AC_CHECK_HEADERS): Add limits.h.
9 * configure: Regenerated.
10 * config.in: Likewise.
12 * config/tc-i386.c: Include "opcodes/i386-init.h".
13 (_i386_insn): Use i386_operand_type for types.
14 (cpu_arch_flags): Updated to new types with bitfield.
15 (cpu_arch_tune_flags): Likewise.
16 (cpu_arch_isa_flags): Likewise.
18 (i386_align_code): Likewise.
19 (set_code_flag): Likewise.
20 (set_16bit_gcc_code_flag): Likewise.
21 (set_cpu_arch): Likewise.
22 (md_assemble): Likewise.
23 (parse_insn): Likewise.
24 (process_operands): Likewise.
25 (output_branch): Likewise.
26 (output_jump): Likewise.
27 (parse_real_register): Likewise.
28 (mode_from_disp_size): Likewise.
29 (smallest_imm_type): Likewise.
31 (type_names): Likewise.
34 (swap_2_operands): Likewise.
35 (optimize_imm): Likewise.
36 (optimize_disp): Likewise.
37 (match_template): Likewise.
38 (check_string): Likewise.
39 (process_suffix): Likewise.
40 (check_byte_reg): Likewise.
41 (check_long_reg): Likewise.
42 (check_qword_reg): Likewise.
43 (check_word_reg): Likewise.
44 (finalize_imm): Likewise.
45 (build_modrm_byte): Likewise.
46 (output_insn): Likewise.
47 (disp_size): Likewise.
49 (output_disp): Likewise.
50 (output_imm): Likewise.
52 (i386_immediate): Likewise.
53 (i386_displacement): Likewise.
54 (i386_index_check): Likewise.
55 (i386_operand): Likewise.
56 (parse_real_register): Likewise.
57 (i386_intel_operand): Likewise.
58 (intel_e09): Likewise.
59 (intel_bracket_expr): Likewise.
60 (intel_e11): Likewise.
61 (cpu_arch_flags_not): New.
62 (cpu_flags_check_x64): Likewise.
63 (cpu_flags_all_zero): Likewise.
64 (cpu_flags_not): Likewise.
65 (i386_cpu_flags_biop): Likewise.
66 (cpu_flags_biop): Likewise.
67 (cpu_flags_match); Likewise.
71 (reg16_inoutportreg): Likewise.
75 (disp16_32): Likewise.
77 (baseindex): Likewise.
86 (imm16_32s): Likewise.
87 (imm16_32_32s): Likewise.
88 (operand_type): Likewise.
89 (operand_type_check): Likewise.
90 (operand_type_match): Likewise.
91 (operand_type_register_match): Likewise.
92 (update_imm): Likewise.
93 (set_code_flag): Also update cpu_arch_flags_not.
94 (set_16bit_gcc_code_flag): Likewise.
96 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
97 Use cpu_flags_match to match instructions.
98 (i386_target_format): Update cpu_arch_isa_flags and
99 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
100 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
101 (match_template): Don't initialize overlap0, overlap1,
102 overlap2, overlap3 and operand_types.
103 (process_suffix): Handle crc32 with 64bit register.
105 (CONSISTENT_REGISTER_MATCH): Likewise.
107 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
110 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
112 * config/tc-i386.c (match_template): Handle invlpga, vmload,
113 vmrun and vmsave in SVME.
114 (process_suffix): Likewise.
116 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
118 * config/tc-i386.c (i386_index_check): Don't use RegRex
119 on the reg_type field.
120 (parse_real_register): Use `||' instead of `|'.
122 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
124 * config/tc-i386.c (process_operands): Remove segment override
125 check on SVME instructions.
126 (i386_index_check): Remove memory operand check on SVME
129 2007-09-04 Alan Modra <amodra@bigpond.net.au>
131 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
132 (md_assemble): Update init of insn. Use insn.reloc instead of
133 calculating from flag.
134 (get_imm): Set reloc rather than flag.
135 (calcop): Formatting.
137 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
139 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
141 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
143 * doc/c-arc.texi: Fix typo.
145 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
147 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
150 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
152 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
153 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
155 (m68k_cpus): Adjust 5407 entry.
157 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
159 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
160 (m68k_cpus): Define 51QE cpu.
162 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
163 Joseph Myers <joseph@codesourcery.com>
165 * as.c (main): Flush stderr before printing listings to ensure
166 consistent output order across platforms.
168 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
170 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
172 2007-08-24 Joseph Myers <joseph@codesourcery.com>
173 Paul Brook <paul@codesourcery.com>
176 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
177 * as.c (show_usage): Document --debug-prefix-map option.
178 (parse_args): Handle --debug-prefix-map.
179 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
180 * stabs.c (stabs_generate_asm_file): Remap debug paths.
181 * Makefile.am (GAS_CFILES): Add remap.c
182 (GENERIC_OBJS): Add remap.o.
183 Regenerate dependencies.
184 * Makefile.in: Regenerate.
185 * doc/as.texinfo (--debug-prefix-map): Document.
187 2007-08-24 Aurelien Jarno <aurel32@debian.org>
189 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
190 before printing them.
192 2007-08-24 Anders Waldenborg <anders@0x63.nu>
193 Alan Modra <amodra@bigpond.net.au>
195 * config/tc-i386.c (lex_got): Don't scan past a comma.
197 2007-08-23 Ben Elliston <bje@au.ibm.com>
199 * config/tc-ppc.c (parse_cpu): Handle "750cl".
200 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
201 (md_show_usage): Document -m750cl.
202 (md_assemble): Handle two delimiters in succession (eg. `),').
203 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
204 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
205 * testsuite/gas/ppc/ppc750ps.s: New file.
206 * testsuite/gas/ppc/ppc750ps.d: Likewise.
208 2007-08-23 Ben Elliston <bje@au.ibm.com>
210 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
212 2007-08-17 Alan Modra <amodra@bigpond.net.au>
215 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
217 (i386_immediate): Detect and complain about more cases of
218 invalid immediate expressions. Return failure rather than
219 converting them to zero.
220 (i386_displacement): Likewise.
222 2007-08-17 Alan Modra <amodra@bigpond.net.au>
224 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
226 2007-08-14 Andreas Schwab <schwab@suse.de>
228 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
231 2007-08-12 Matthias Klose <doko@ubuntu.com>
233 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
234 $(top_srcdir)/../../bfd/doc.
235 * doc/Makefile.in: Regenerate.
237 2007-08-10 Nick Clifton <nickc@redhat.com>
239 * NEWS: Add a marker for the 2.18 features.
241 2007-08-09 Paul Brook <paul@codesourcery.com>
243 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
245 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
247 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
249 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
251 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
252 DWORD memory to Reg64 in Intel synax.
253 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
254 Reg32 in Intel syntax.
256 2007-07-25 Sterling Augustine <sterling@tensilica.com>
258 * config/tc-xtensa.c (xtensa_extui_opcode): New.
259 (xg_expand_assembly_insn): Check for invalid extui operands.
260 (md_begin): Initialize xtensa_extui_opcode.
262 2007-07-24 Nick Clifton <nickc@redhat.com>
264 * config/tc-mep.h (skip_whitespace): Remove definition.
266 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
268 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
271 (f32_patt): Remove f32_15.
272 (f16_patt): Likewise.
273 (i386_align_code): Updated to alt_long_patt for 64bit by
276 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
278 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
280 * config/tc-i386.c (i386_align_code): Enable alignment up to
281 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
284 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
286 2007-07-20 Nick Clifton <nickc@redhat.com>
288 * app.c (do_scrub_chars): Provide a one character buffer to hold a
289 pushed back newline at the end of an unterminated quoted string.
291 2007-07-14 Nick Clifton <nickc@redhat.com>
293 * config/tc-arm.c (create_register_alias): Return a boolean rather
295 Check the return value of insert_reg_alias and do not continue to
296 create aliases once an insertion has failed.
297 (s_unreq): Delete the all-upper-case and all-lower-case
298 alternatives as well.
300 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
302 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
305 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
307 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
310 2007-07-04 Richard Sandiford <richard@codesourcery.com>
312 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
313 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
314 Deprecate *x and *fx.
315 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
318 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
320 * config/obj-coff.h (x86_64_target_format): Renamed to ...
321 (i386_target_format): This
322 (TARGET_FORMAT): Use i386_target_format.
324 * config/tc-i386.c (x86_64_target_format): Removed.
325 (i386_target_format): Handle PE formats.
327 2007-07-04 Nick Clifton <nickc@redhat.com>
329 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
330 to get the right length of printed value.
332 2007-07-03 Nick Clifton <nickc@redhat.com>
334 * COPYING: Replace with GPLv3 text.
335 * app.c: Update copyright notice to refer to GPLv3.
336 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
337 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
338 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
339 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
340 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
341 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
342 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
343 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
344 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
345 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
346 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
347 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
348 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
349 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
350 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
351 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
352 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
353 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
354 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
355 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
356 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
357 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
358 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
359 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
360 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
361 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
362 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
363 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
364 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
365 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
366 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
367 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
368 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
369 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
370 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
371 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
372 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
373 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
374 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
375 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
376 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
377 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
378 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
379 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
380 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
381 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
382 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
383 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
384 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
385 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
386 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
387 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
388 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
389 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
390 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
391 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
392 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
393 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
394 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
395 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
397 * flonum-mult.c: Likewise, and also correct typo referring to
398 non-existant GNU Assembler General Public License.
399 * config/tc-m68851.h: Likewise.
400 * NEWS: Mention the new license. Also note where the 2.17 release
402 * config/e-crisaout.c: Add copyright header.
403 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
404 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
405 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
406 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
407 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
408 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
409 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
410 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
411 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
412 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
413 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
414 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
415 config/te-wince-pe.h: Likewise.
417 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
419 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
420 (install_operand): Add E encoding.
421 (md_begin): Check and skip initial '.' arg character.
422 (get_num): Add 0..511 case.
424 2007-07-03 Alan Modra <amodra@bigpond.net.au>
427 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
428 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
430 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
433 * app.c (do_scrub_chars <state 5>): Check for output buffer full
436 2007-07-02 Joseph Myers <joseph@codesourcery.com>
438 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
439 s_dtprel_internal): New.
440 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
441 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
442 BFD_RELOC_MIPS_TLS_DTPREL64.
444 2007-07-02 Alan Modra <amodra@bigpond.net.au>
446 * Makefile.am: Run "make dep-am".
447 * Makefile.in: Regenerate.
448 * aclocal.m4: Regenerate.
449 * config.in: Regenerate.
450 * doc/Makefile.in: Regenerate.
451 * po/POTFILES.in: Regenerate.
452 * po/gas.pot: Regenerate.
454 2007-07-02 Alan Modra <amodra@bigpond.net.au>
456 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
457 coff section flag values to bfd section flag.
459 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
461 * aclocal.m4: Regenerated.
462 * doc/Makefile.in: Likewise.
463 * Makefile.in: Likewise.
465 2007-06-29 Joseph Myers <joseph@codesourcery.com>
467 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
469 2007-06-29 Joseph Myers <joseph@codesourcery.com>
471 * as.c (create_obj_attrs_section): New.
472 (main): Call create_obj_attrs_section for ELF.
473 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
474 skip_past_comma, s_vendor_attribute): New.
475 (potable): Add gnu_attribute for ELF.
476 * read.h (s_vendor_attribute): Declare.
477 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
478 round s_vendor_attribute.
479 (aeabi_set_public_attributes): Update for new attributes
481 (arm_md_end): Remove attributes contents setting now done
484 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
486 * Makefile.am: Add CR16 related entry.
487 * Makefile.in: Regenerate.
488 * config/tc-cr16.h: New file
489 * config/tc-cr16.c: New file
490 * doc/c-cr16.texi: New file for cr16
491 * doc/all.texi: Entry for cr16
492 * doc/Makefile.am: Added c-cr16.texi
493 * doc/Makefile.in: Regenerate
494 * doc/as.texinfo: Entry for CR16 target
495 * NEWS: Announce the support for the new target.
497 2007-06-26 Paul Brook <paul@codesourcery.com>
499 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
501 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
503 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
505 * config/tc-i386.c (process_operands): Replace regKludge
508 2007-06-25 Richard Sandiford <richard@codesourcery.com>
510 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
511 * config/tc-mips.c (append_insn): Record which symbols have
512 R_MIPS16_26 relocations against them.
513 (mips_fix_adjustable): Don't reduce relocations against such symbols.
515 2007-06-22 Sterling Augustine <sterling@tensilica.com>
517 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
518 (frag_format_size): Handle RELAX_IMMED_STEP3.
519 (xtensa_relax_frag, md_convert_frag): Likewise.
520 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
521 (RELAX_IMMED_MAXSTEPS): Adjust.
522 * config/xtensa-relax.c (widen_spec_list): Add transitions from
523 wide branches to branch-over-jumps.
524 (build_transition): Handle wide branches in transition patterns.
526 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
528 * config/tc-i386.c (disp_size): New.
529 (imm_size): Likewise.
530 (output_disp): Use disp_size and imm_size.
531 (output_imm): Use imm_size.
533 2007-06-19 Sterling Augustine <sterling@tensilica.com>
535 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
536 use of literal_frag field.
537 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
538 in the literal_frag field.
539 (xtensa_move_literals): Use it here instead of searching. Update
540 literal_frag field with new value.
542 2007-06-14 Paul Brook <paul@codesourcery.com>
544 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
545 narrow shift by immediate.
547 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
549 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
551 * acinclude.m4: Don't include m4 files.
552 (BFD_BINARY_FOPEN): Removed.
553 Remove libtool kludge.
555 * Makefile.in: Regenerated.
556 * doc/Makefile.in: Likewise.
557 * aclocal.m4: Likewise.
558 * configure: Likewise.
560 2007-06-11 Sterling Augustine <sterling@tensilica.com>
561 Bob Wilson <bob.wilson@acm.org>
563 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
564 (XTENSA_PROP_NO_TRANSFORM): ...this.
565 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
566 (xtensa_mark_frags_for_org): New.
567 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
568 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
569 (get_frag_property_flags): Adjust reference to is_no_transform flag.
570 (xtensa_frag_flags_combinable): Likewise.
571 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
572 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
574 2007-06-06 Paul Brook <paul@codesourcery.com>
576 * config/tc-arm.c (s_align): Pad code sections appropriately.
578 2007-06-05 Paul Brook <paul@codesourcery.com>
580 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
582 2007-06-05 Nick Clifton <nickc@redhat.com>
585 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
587 2007-06-05 Alan Modra <amodra@bigpond.net.au>
589 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
591 (tc_gen_reloc): Abort if neither addsy or subsy is set.
592 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
593 * config/tc-spu.h (md_operand): Handle @ppu without sym.
595 2007-05-31 Paul Brook <paul@codesourcery.com>
597 * config/tc-arm.c (insns): Allow strex on M profile cores.
599 2007-05-29 David S. Miller <davem@davemloft.net>
600 Jakub Jelinek <jakub@redhat.com>
603 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
604 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
606 2007-05-29 Alan Modra <amodra@bigpond.net.au>
608 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
610 2007-05-29 Alan Modra <amodra@bigpond.net.au>
612 * config/tc-ppc.c: Convert to ISO C.
613 * config/tc-ppc.c: Likewise.
615 2007-05-29 Alan Modra <amodra@bigpond.net.au>
617 * write.h (EXEC_MACHINE_TYPE): Delete.
618 (string_byte_count, section_alignment): Delete.
620 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
622 * app.c (do_scrub_chars): Cope with \ at end of buffer.
624 2007-05-26 Alan Modra <amodra@bigpond.net.au>
626 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
627 top 32 bits of 64 bit value if so doing results in passing
628 range check. Rewrite sign extension fudges similarly. Enable
629 fudges for powerpc64 too. Report user value if range check
630 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
631 range rather than value, also to report user value on failure.
633 2007-03-25 Paul Brook <paul@codesourcery.com>
635 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
636 (do_t_add_sub): Correctly encode subs pc, lr, #const.
637 (do_t_mov_cmp): Correctly encode movs pc, lr.
639 2007-05-24 Steve Ellcey <sje@cup.hp.com>
641 * Makefile.in: Regnerate.
642 * configure: Regenerate.
643 * aclocal.m4: Regenerate.
644 * doc/Makefile.in: Regenerate.
646 2007-05-22 Bob Wilson <bob.wilson@acm.org>
648 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
649 and index entries about automatic alignment of ENTRY instructions.
651 2007-05-22 Nick Clifton <nickc@redhat.com>
653 * doc/as.texinfo: Use @copying around the copyright notice.
655 2007-05-18 Joseph Myers <joseph@codesourcery.com>
657 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
660 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
663 2003-06-05 Michal Ludvig <mludvig@suse.cz>
664 * doc/as.texinfo: Document new directives: .cfi_restore,
665 .cfi_undefined, .cfi_same_value, .cfi_return_column,
666 .cfi_remember_state and .cfi_restore_state.
668 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
670 * config/tc-m68k.c (md_apply_fix): Show value of out of range
671 fixups in error message.
672 (md_conver_frag_1): Propagate the fix source location and use
673 as_bad_where rather than fatal, for better error messages.
675 2007-05-16 Paul Brook <paul@codesourcery.com>
677 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
679 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
681 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
683 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
686 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
687 addend is stored for relocs against weak symbols.
688 (md_apply_fix): So not loose track of addend for relocs against
691 2007-05-14 Thiemo Seufer <ths@mips.com>
693 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
695 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
697 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
698 addri, addri.c, subi, and subi.c when immediate number is hex.
699 (score_insns): Remove subis and subis.c.
700 (do_sub_rdi16): Delete.
702 2007-05-11 Alan Modra <amodra@bigpond.net.au>
704 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
706 (md_assemble): Tidy use of insn.flag.
707 (get_imm): Likewise. Handle uppercase input too.
708 (spu_cons): New function.
709 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
710 (TC_FORCE_RELOCATION): Don't resolve them either.
712 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
714 * config/tc-arm.c (md_apply_fix): Generate more accurate
715 diagnostic when 8-bit immediate range is exceeded for
716 BFD_RELOC_ARM_OFFSET_IMM8.
718 2007-05-04 Alan Modra <amodra@bigpond.net.au>
721 * config/tc-i386.c (lex_got): Don't replace the reloc token with
722 a space if we already have a space.
724 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
726 * config/tc-i386.c (match_template): Don't explicitly check
727 suffix for crc32 in Intel mode.
728 (process_suffix): Issue an error for crc32 if the operand size
731 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
732 Nick Clifton <nickc@redhat.com>
735 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
736 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
737 (md_apply_fix): Put zero values into the frags referencing weak
740 2007-05-02 Alan Modra <amodra@bigpond.net.au>
743 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
746 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
748 * config/tc-i386.c (match_template): Check suffix for crc32 in
750 (process_suffix): Default the suffix of 8bit crc32 to
752 (check_byte_reg): Skip check for 8bit crc32.
754 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
756 * config/tc-i386.c (md_assemble): Use register_prefix in
757 error/warning message.
758 (check_byte_reg): Likewise.
759 (check_long_reg): Likewise.
760 (check_qword_reg): Likewise.
761 (check_word_reg): Likewise.
762 (process_operands): Likewise.
764 2007-04-30 Alan Modra <amodra@bigpond.net.au>
767 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
770 2007-04-28 Thiemo Seufer <ths@networkno.de>
772 * config/tc-mips.c: Fix comment.
774 2007-04-26 Anatoly Sokolov <aesok@post.ru>
776 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
777 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
778 * doc/c-avr.texi: Document new devices.
780 2007-04-24 Alan Modra <amodra@bigpond.net.au>
782 * Makefile.am: Run "make dep-am".
783 * Makefile.in: Regenerate.
785 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
787 * config/tc-m68k.c (mcf54455_ctrl): New.
788 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
789 (m68k_archs): Add isac.
790 (m68k_cpus): Add 54455 family.
791 (m68k_ip): Split Bg into Bb, Bs, Bg.
792 (m68k_elf_final_processing): Add ISA_C.
793 * doc/c-m68k.texi (M680x0 Options): Add isac.
795 2007-04-22 Alan Modra <amodra@bigpond.net.au>
797 * read.c (read_a_source_file): Skip multiple spaces to
798 cover hack in mmix md_start_line_hook which overwrites a
799 colon with a space. Delete sermon and needless assertion.
801 2007-04-21 Alan Modra <amodra@bigpond.net.au>
803 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
804 (md_atof): Make number_of_chars unsigned. Revert last change.
805 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
806 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
807 * config/tc-sh.h (md_optimize_expr): Likewise.
808 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
810 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
812 2007-04-21 Nick Clifton <nickc@redhat.com>
814 * config/atof-vax.c (md_atof): Fix comparison inside know().
816 * config/tc-ia64.c (emit_one_bundle): Fix typo.
818 2007-04-21 Alan Modra <amodra@bigpond.net.au>
820 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
821 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
822 Don't skip over NUL char.
823 (pseudo_set): Set X_op for registers to O_register.
824 * symbols.c (symbol_clone): Remove assertion that sym is defined.
825 (resolve_symbol_value): Resolve O_register symbols.
826 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
827 Instead find st(0) by hash lookup.
828 * config/tc-ppc.c (ppc_macro): Warning fix.
830 * as.h (ENABLE_CHECKING): Default define to 0.
831 (know): Assert if ENABLE_CHECKING.
832 (struct relax_type): Remove superfluous declaration.
833 * configure.in (--enable-checking): New.
834 * configure: Regenerate.
835 * config.in: Regenerate.
836 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
837 Check for duplicate powerpc_operands entries.
839 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
841 * config/tc-m68k.c (mcf5253_ctrl): New.
842 (mcf52223_ctrl): New.
843 (m68k_cpus): Add 5253, 52221, 52223.
845 * config/m68k-parse.h (RAMBAR_ALT): New.
846 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
847 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
848 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
849 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
850 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
852 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
853 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
854 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
855 to control register mapping.
857 2007-04-20 Alan Modra <amodra@bigpond.net.au>
859 * messages.c (as_internal_value_out_of_range): Fix typo in
860 error message. Return after printing domain error.
861 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
862 in max when shifting right.
864 2007-04-20 Alan Modra <amodra@bigpond.net.au>
866 * messages.c (as_internal_value_out_of_range): Extend to report
867 errors for values with invalid low bits set.
868 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
869 fields. Check that operands and opcode fields are disjoint.
870 (ppc_insert_operand): Check operands using mask rather than bit
871 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
873 (md_apply_fix): Adjust for struct powerpc_operand change.
875 2007-04-19 Paul Brook <paul@codesourcery.com>
877 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
878 Thumb-1. Add sanity check for bogus relaxations.
880 2007-04-19 Paul Brook <paul@codesourcery.com>
882 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
884 2007-04-19 Alan Modra <amodra@bigpond.net.au>
886 * Makefile.am: Run "make dep-am".
887 * Makefile.in: Regenerate.
889 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
891 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
893 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
895 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
897 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
899 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
900 (match_template): Handle operand size for crc32 in SSE4.2.
901 (process_suffix): Handle operand type for crc32 in SSE4.2.
902 (output_insn): Support SSE4.2.
904 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
906 * config/tc-i386.c (cpu_arch): Add .sse4.1.
907 (process_operands): Adjust implicit operand for blendvpd,
908 blendvps and pblendvb in SSE4.1.
909 (output_insn): Support SSE4.1.
911 2007-04-18 Paul Brook <paul@codesourcery.com>
913 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
915 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
917 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
918 of as_warn_where for misaligned data.
920 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
922 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
925 2007-04-14 Steve Ellcey <sje@cup.hp.com>
927 * Makefile.am: Add ACLOCAL_AMFLAGS.
928 * Makefile.in: Regenerate.
930 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
932 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
933 (sh_optimize_expr): Likewise.
934 * config/tc-sh.h (md_optimize_expr): Define.
935 (sh_optimize_expr): Prototype.
937 2007-04-06 Matt Thomas <matt@netbsd.org>
939 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
940 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
941 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
943 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
945 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
947 2007-04-04 Paul Brook <paul@codesourcery.com>
949 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
950 (insns): Use I15 for vext.
952 2007-04-04 Paul Brook <paul@codesourcery.com>
954 * configure.tgt: Loosen checks for arm uclinux eabi targets.
956 2007-04-02 Sterling Augustine <sterling@tensilica.com>
958 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
959 outputting_stabs_line_debug.
961 2007-03-26 Anatoly Sokolov <aesok@post.ru>
963 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
964 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
966 * doc/c-avr.texi: Document new devices.
968 2007-04-02 Richard Sandiford <richard@codesourcery.com>
970 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
971 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
972 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
974 2007-03-30 Sterling Augustine <sterling@tensilica.com>
975 Bob Wilson <bob.wilson@acm.org>
977 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
978 Do not check is_loop_target flag.
979 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
980 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
981 xtensa_move_labels for alignment of loop opcodes.
983 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
985 * config/tc-i386.c (process_suffix): Reindent a bit.
987 2007-03-30 Paul Brook <paul@codesourcery.com>
989 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
990 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
991 (do_t_push_pop): Use encode_thumb2_ldmstm.
993 2007-03-29 DJ Delorie <dj@redhat.com>
995 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
996 (md_relax_table): Add entries for ADJNZ macros.
997 (M32C_Macros): Add ADJNZ macros.
998 (subtype_mappings): Add entries for ADJNZ macros.
999 (insn_to_subtype): Check for adjnz and sbjnz insns.
1000 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1001 (md_convert_frag): Convert adjnz and sbjnz.
1003 2007-03-29 Nick Clifton <nickc@redhat.com>
1005 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1007 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1008 using ITBL_NUMBER_OF_PROCESSORS.
1009 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1011 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1013 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1014 register operands, encode destination in i.rm.regmem if its
1017 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1018 Phil Edwards <phil@codesourcery.com>
1020 * doc/as.texinfo: Put the contents after the title page rather
1021 than at the end of the document.
1023 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1025 * NEWS: Mention ".reloc".
1027 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1029 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1030 in FLIX instructions.
1032 2007-03-26 Julian Brown <julian@codesourcery.com>
1034 * config/tc-arm.c (arm_it): Add immisfloat field.
1035 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1036 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1037 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1039 (neon_cmode_for_move_imm): Reject non-float immediates for float
1041 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1043 2007-03-26 Julian Brown <julian@codesourcery.com>
1045 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1047 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1049 * doc/as.texinfo (Reloc): Document.
1050 * read.c (potable): Add "reloc".
1051 (s_reloc): New function.
1052 * write.c (reloc_list): New global var.
1053 (resolve_reloc_expr_symbols): New function.
1054 (write_object_file): Call it.
1055 (write_relocs): Process reloc_list.
1056 * write.h (struct reloc_list): New.
1057 (reloc_list): Declare.
1059 2007-03-24 Paul Brook <paul@codesourcery.com>
1061 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1063 2007-03-24 Paul Brook <paul@codesourcery.com>
1064 Mark Shinwell <shinwell@codesourcery.com>
1066 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1067 (parse_operands): Don't expect comma if first operand missing.
1069 (do_srs): Encode register number, checking it is r13. Update comment.
1070 (insns): Update SRS entries to take a register.
1072 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1074 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1076 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1078 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1079 attempt to jump to the next instruction into NOPs.
1081 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1083 * config/tc-spu.c: Don't include opcode/spu.h.
1084 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1085 (md_apply_fix): Adjust.
1086 * config/tc-spu.h: Include opcode/spu.h.
1087 (struct tc_fix_info): New.
1088 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1089 (TC_FORCE_RELOCATION): Define.
1091 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1093 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1095 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1097 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1098 xchg for xchg %rax,%rax.
1100 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1102 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1103 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1105 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1108 * config/tc-i386.c (match_template): Properly handle 64bit mode
1111 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1114 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1116 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1118 * Makefile.am: Run dep-am.
1119 * Makefile.in: Regenerated.
1121 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1123 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1124 (NOP_OPCODE): Removed.
1125 (template): Likewise.
1127 2007-03-21 Andreas Schwab <schwab@suse.de>
1129 * config/tc-i386.h (NOP_OPCODE): Restore.
1131 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1133 * config/tc-arm.c (do_mul): Don't warn about overlapping
1134 Rd and Rm operands when assembling for v6 or above.
1135 Correctly capitalize register names in the messages.
1136 (do_mlas): Likewise. Delete spurious blank line.
1138 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1140 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1142 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1144 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1146 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1149 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1152 * app.c (do_scrub_chars): PUT after setting states.
1154 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1156 * Makefile.am: Run "make dep-am".
1157 * Makefile.in: Regenerated.
1159 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1161 (md_begin): Check reg_name != NULL for the last entry in
1164 * config/tc-i386.h: Move many entries to opcode/i386.h and
1167 * configure.in (need_opcodes): Set true for i386.
1168 * configure: Regenerated.
1170 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1172 * Makefile.am (REPORT_BUGS_TO): Removed.
1173 (INCLUDES): Remove -DREPORT_BUGS_TO.
1174 * Makefile.in: Regenerated.
1176 * configure.in (--with-bugurl): Removed.
1177 * configure: Regenerated.
1179 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1180 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1181 (TEXI2DVI): Likewise.
1182 (gasver.texi): Removed.
1183 (MOSTLYCLEANFILES): Remove gasver.texi.
1184 (as.1): Don't depend on gasver.texi.
1185 * doc/Makefile.in: Regenerated.
1187 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1189 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1191 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1192 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1193 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1194 * gas/symbols.c (copy_symbol_attributes): Use
1195 TC_COPY_SYMBOL_ATTRIBUTES.
1197 2007-03-14 Paul Brook <paul@codesourcery.com>
1199 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1201 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1204 * write.c (relax_segment): Insert extra alignment padding
1205 to break infinite relax loop when given impossible
1206 gcc_except_table assembly.
1208 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1210 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1211 on i.tm.base_opcode.
1212 (match_template): Likewise.
1213 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1215 * config/tc-i386.h (Opcode_D): New.
1216 (Opcode_FloatR): Likewise.
1217 (Opcode_FloatD): Likewise.
1220 (FloatMF): Likewise.
1224 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1226 * app.c (do_scrub_chars): Recognize comments after # line "file".
1227 * read.c (get_linefile_number): New.
1228 (s_app_line): Accept ill-formed .linefile lines as comments.
1230 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1232 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1234 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1236 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1237 * as.h (new_logical_line_flags): New.
1238 * input-scrub.c (new_logical_line): Turned into wrapper for...
1239 (new_logical_line_flags): this. Handle flags.
1240 * read.c (potable): Add linefile. Adjust appline argument.
1241 (s_app_file): Fake .appfiles no more.
1242 (s_app_line): For .linefile, accept file name and flags.
1244 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1246 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1248 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1250 * Makefile.am: Run "make dep-am".
1251 * Makefile.in: Regenerate.
1252 * po/POTFILES.in: Regenerate.
1254 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1256 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1258 * doc/Makefile.am (gasver.texi): Define BUGURL.
1259 * doc/as.texinfo: Use BUGURL.
1260 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1262 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1264 * config/tc-s390.c (md_parse_option): z9-ec option added.
1266 2007-03-02 Paul Brook <paul@codesourcery.com>
1268 * config/tc-arm.c (relax_immediate): Always return positive values.
1269 (relaxed_symbol_addr): New function.
1270 (relax_adr, relax_branch): Use it.
1271 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1273 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1275 * as.c (parse_args): Update copyright date.
1277 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1279 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1281 2007-02-28 Nick Clifton <nickc@redhat.com>
1284 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1285 just return -1 whenever a problem is encountered.
1286 (md_assemble): If do_assemble returns -1 generate a non-fatal
1287 error message and return.
1290 * config/tc-msp430.c (line_separator_char): Change to '{'.
1292 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1294 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1295 (build_jump_insn): Likewise.
1296 (build_insn): Likewise.
1297 (s_m68hc11_relax): Likewise.
1299 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1301 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1303 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1305 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1307 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1309 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1310 (md_assemble): Likewise.
1312 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1314 * write.c (size_seg): Always clear SEC_RELOC here.
1315 (install_reloc): New function, extracted from..
1316 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1317 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1318 testing frag size. Set SEC_RELOC here.
1320 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1323 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1325 2007-02-20 Thiemo Seufer <ths@mips.com>
1327 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1329 2007-02-20 Thiemo Seufer <ths@mips.com>
1331 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1333 2007-02-20 Thiemo Seufer <ths@mips.com>
1334 Chao-Ying Fu <fu@mips.com>
1336 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1337 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1338 (macro_build): Add case '2'.
1339 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1340 (validate_mips_insn): Add support for balign instruction.
1341 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1342 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1343 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1344 command line options.
1345 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1346 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1347 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1348 .set dspr2, .set nodspr2.
1350 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1352 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1353 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1355 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1357 * write.c (TC_FX_SIZE_SLACK): Define.
1358 (write_relocs): Reinstate check for fixup within frag.
1359 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1360 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1361 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1362 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1363 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1365 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1366 Nathan Sidwell <nathan@codesourcery.com>
1367 Vladimir Prus <vladimir@codesourcery.com
1368 Joseph Myers <joseph@codesourcery.com>
1370 * configure.in (--with-bugurl): New option.
1371 * configure: Regenerate.
1372 * dep-in.sed: Remove bin-bugs.h.
1373 * Makefile.am (REPORT_BUGS_TO): Define.
1374 (INCLUDES): Define REPORT_BUGS_TO.
1375 (DEP_INCLUDES): Likewise.
1376 ($(OBJS)): No longer depend on bin-bugs.h.
1377 * Makefile.in: Regenerate.
1378 * doc/Makefile.in: Regenerate.
1379 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1380 * as.h: Remove include of bin-bugs.h.
1382 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1384 * write.c: White space fixes.
1385 (fixup_segment): Move symbol_mri_common_p adjustments..
1386 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1387 (adjust_reloc_syms): ..to here.
1389 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1391 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1392 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1393 (subseg_set_rest): Remove unnecessary cast.
1394 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1395 Remove unnecessary forward declarations and casts.
1396 (set_symtab): Delete extern bfd_alloc.
1397 (fixup_segment): Move.
1399 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1401 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1402 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1403 (mcf5475_ctrl, mcf5485_ctrl): New.
1404 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1405 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1406 (init_table): Add asid, mmubar, adjust rombar0.
1408 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1410 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1411 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1412 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1413 code, and test for these insns using a combination of
1414 opcode_modifier and operand_types.
1416 2007-02-07 Paul Brook <paul@codesourcery.com>
1418 * configure.tgt: Add arm*-*-uclinux-*eabi.
1420 2007-02-05 Dave Brolley <brolley@redhat.com>
1421 Richard Sandiford <rsandifo@redhat.com>
1422 DJ Delorie <dj@redhat.com>
1423 Stan Cox <scox@redhat.com>
1424 Jim Blandy <jimb@redhat.com>
1425 Nick Clifton <nickc@redhat.com>
1426 Jim Wilson <wilson@redhat.com>
1427 Frank Ch. Eigler <fche@redhat.com>
1428 Graydon Hoare <graydon@redhat.com>
1429 Ben Elliston <bje@redhat.com>
1430 John Healy <jhealy@redhat.com>
1431 Richard Henderson <rth@redhat.com>
1433 * Makefile.am (CPU_TYPES): Add mep.
1434 (TARGET_CPU_CFILES): Add tc-mep.c.
1435 (TARGET_CPU_HFILES): Add tc-mep.h.
1436 (DEPTC_mep_elf): New variable.
1437 (DEPTC_mep_coff): Likewise.
1438 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1439 * configure.in: Support mep.
1440 * configure.tgt: Likewise.
1441 * config/tc-mep.c: New file.
1442 * config/obj-elf.c: New file.
1443 * config/tc-mep.c: New file.
1444 * config/tc-mep.h: New file.
1445 * testsuite/gas/mep: New testsuite with content.
1446 * Makefile.in: Regenerate.
1447 * configure: Regenerate.
1449 2007-02-05 Dave Brolley <brolley@redhat.com>
1451 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1452 (complex_reloc_installation_howto): Removed.
1454 2007-02-05 Dave Brolley <brolley@redhat.com>
1455 Graydon Hoare <graydon@redhat.com>
1456 DJ Delorie <dj@redhat.com>
1457 Catherine Moore <clm@redhat.com>
1458 Michael Chastain <chastain@redhat.com>
1459 Frank Ch. Eigler <fche@redhat.com>
1461 * symbols.c (use_complex_relocs_for): New, to decide
1462 when to use complex relocs. Add signed RELC support.
1463 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1464 encode expression symbols as mangled complex relocation symbols (when
1465 compiled with -DOBJ_COMPLEX_RELOC).
1466 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1467 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1468 encode_addend with new args. Modify to get start, length from
1469 ifield whenever it is set. Also change condition on which
1470 self-describing relocs are encoded. Add hook into
1471 gas_cgen_encode_addend.
1472 (queue_fixup_recursively): Add signed RELC support. Change from masked
1473 expr to trunc flag. Restore assignment of sub-field value to
1474 temporary in fixups array. Reflect changed meaning of last arg to
1475 queue_fixup_recursively.
1476 (fixup): Add cgen_maybe_multi_ifield member.
1477 (make_right_shifted_expr): New function.
1478 (queue_fixup): Change to recursive function that fragments
1479 fixups if operand has a multi-ifield.
1480 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1481 symbols, call weak_operand_overflow_check, and fragment call
1482 queue_fixup with operand fields.
1483 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1484 (weak_operand_overflow_check): New function to try to select
1486 (gas_cgen_encode_addend): New function for relc.
1487 (gas_cgen_install_complex_reloc): Likewise.
1488 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1489 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1490 cgen_maybe_multi_ifield field to fx_cgen substructure.
1491 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1492 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1494 2007-02-03 DJ Delorie <dj@delorie.com>
1496 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1498 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1499 (m32c_cons_fix_new): Prototype.
1501 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1503 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1504 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1506 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1508 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1509 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1510 (map_suffix_reloc_to_operator): New.
1511 (map_operator_to_reloc): New.
1512 (expression_maybe_register): Fix incorrect test of return value from
1513 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1514 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1516 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1518 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1519 (tinsn_get_tok): Delete prototype.
1520 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1522 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1524 * config/xtensa-relax.h (struct build_instr): Delete id field.
1525 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1527 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1528 set op_data fields to zero.
1529 (parse_id_constant): Delete.
1530 (build_transition): Remove code to handle numbered literals and labels.
1532 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1534 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1535 (build_transition_table): Likewise.
1537 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1539 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1541 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1543 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1545 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1546 (struct fix <fx_plt>): Rename to tcbit2.
1547 * write.c (fix_new_internal): Adjust.
1548 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1549 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1550 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1551 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1552 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1553 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1554 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1555 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1556 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1557 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1558 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1559 Instead, compare fx_r_type.
1560 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1561 fx_tcbit in place of fx_plt.
1562 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1563 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1566 2007-01-30 Nick Clifton <nickc@redhat.com>
1568 * as.c (main): Mark symbols created via the --defsym command line
1569 option as volatile so that they can be overridden later on by a
1570 .set directive. This maintains compatibility with the behaviour
1571 of earlier versions of the assembler.
1572 * doc/as.texinfo (--defsym): Document that the defined symbol's
1573 value can be overridden via a .set directive.
1575 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1577 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1578 (swap_2_operands): This. Take 2 ints.
1579 (md_assemble): Updated.
1580 (swap_operands): Call swap_2_operands to swap 2 operands.
1582 2007-01-24 DJ Delorie <dj@redhat.com>
1584 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1586 2007-01-22 Nick Clifton <nickc@redhat.com>
1589 * tc-score.c: Remove unnecessary uses of _().
1590 Make the err_msg[] a file level local array in order to save
1592 Remove unnecessary sprintf()s.
1594 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1597 * config/tc-score.c : Using _() for const string.
1598 Do not assign inst.error with a local string pointer.
1599 (md_section_align): Pad section.
1601 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1603 * config/tc-i386.c (build_modrm_byte): Check number of operands
1604 when procssing memory/register operand.
1606 2007-01-12 Nick Clifton <nickc@redhat.com>
1609 * macro.c (expand_irp): Do not ignore spaces inside quoted
1612 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1614 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1615 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1616 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1617 (TC_FORCE_RELOCATION): Define.
1618 (TC_FORCE_RELOCATION_LOCAL): Define.
1619 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1621 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1623 * input-file.c (input_file_open): Check fgets return.
1625 2007-01-11 Paul Brook <paul@codesourcery.com>
1627 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1629 2007-01-11 Nick Clifton <nickc@redhat.com>
1632 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1635 * config/tc-mcore.c (md_number_to_chars): Use
1636 number_to_chars_{big|little}endian.
1638 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1640 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1641 architecture by itself.
1642 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1643 (m68k_elf_final_processing): Treat Fido as an architecture by
1646 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1648 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1650 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1652 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1653 depending on allow_naked_reg.
1655 2007-01-04 Paul Brook <paul@codesourcery.com>
1657 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1659 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1662 * config/tc-i386.c (register_prefix): New.
1663 (set_intel_syntax): Set set_intel_syntax to "" if register
1664 prefix isn't needed.
1665 (check_byte_reg): Use register_prefix for error message.
1666 (check_long_reg): Likewise.
1667 (check_qword_reg): Likewise.
1668 (check_word_reg): Likewise.
1670 2007-01-04 Julian Brown <julian@codesourcery.com>
1672 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1673 (do_neon_qshl_imm): Likewise.
1674 (do_neon_rshl): New function. Handle rounding variants of
1675 v{q}shl-by-register.
1676 (insns): Use do_neon_rshl for vrshl, vqrshl.
1678 2007-01-04 Paul Brook <paul@codesourcery.com>
1680 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1683 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1685 * config/tc-i386.c (swap_operands): Remove branches.
1687 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1689 * config/tc-i386.c: Update copyright year.
1690 * config/tc-i386.h: Likewise.
1692 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1694 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1697 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1699 * config/tc-i386.c: Convert to ISO C90 formatting
1700 * config/tc-i386.h: Likewise.
1702 2007-01-03 David Daney <ddaney@avtrex.com>
1704 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1707 For older changes see ChangeLog-2006
1713 version-control: never