* config/tc-xtensa.c (emit_single_op): Do not relax MOVI
[binutils-gdb.git] / gas / ChangeLog
1 2006-04-14 Sterling Augustine <sterling@tensilica.com>
2
3 * config/tc-xtensa.c (emit_single_op): Do not relax MOVI
4 instructions when such transformations have been disabled.
5
6 2006-04-10 Sterling Augustine <sterling@tensilica.com>
7
8 * config/tc-xtensa.c (xg_assemble_vliw_tokens): Record loop target
9 symbols in RELAX[_CHECK]_ALIGN_NEXT_OPCODE frags.
10 (xtensa_fix_close_loop_end_frags): Use the recorded values instead of
11 decoding the loop instructions. Remove current_offset variable.
12 (xtensa_fix_short_loop_frags): Likewise.
13 (min_bytes_to_other_loop_end): Remove current_offset argument.
14
15 2006-04-09 Arnold Metselaar <arnold.metselaar@planet.nl>
16
17 * config/tc-z80.c (z80_optimize_expr): Removed; redundant since 2006-04-04.
18 * config/tc-z80.h (z80_optimize_expr, md_optimize_expr): Removed.
19
20 2006-04-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
21
22 * gas/config/tc-avr.c (mcu_types): Add support for attiny261,
23 attiny461, attiny861, attiny25, attiny45, attiny85,attiny24,
24 attiny44, attiny84, at90pwm2, at90pwm3, atmega164, atmega324,
25 atmega644, atmega329, atmega3290, atmega649, atmega6490,
26 atmega406, atmega640, atmega1280, atmega1281, at90can32,
27 at90can64, at90usb646, at90usb647, at90usb1286 and
28 at90usb1287.
29 Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx.
30
31 2006-04-07 Paul Brook <paul@codesourcery.com>
32
33 * config/tc-arm.c (parse_operands): Set default error message.
34
35 2006-04-07 Paul Brook <paul@codesourcery.com>
36
37 * config/tc-arm.c (parse_tb): Set inst.error before returning FAIL.
38
39 2006-04-07 Paul Brook <paul@codesourcery.com>
40
41 * config/tc-arm.c (md_apply_fix): Set H bit on blx instruction.
42
43 2006-04-07 Paul Brook <paul@codesourcery.com>
44
45 * config/tc-arm.c (THUMB2_LOAD_BIT): Define.
46 (move_or_literal_pool): Handle Thumb-2 instructions.
47 (do_t_ldst): Call move_or_literal_pool for =N addressing modes.
48
49 2006-04-07 Alan Modra <amodra@bigpond.net.au>
50
51 PR 2512.
52 * config/tc-i386.c (match_template): Move 64-bit operand tests
53 inside loop.
54
55 2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
56
57 * po/Make-in: Add install-html target.
58 * Makefile.am: Add install-html and install-html-recursive targets.
59 * Makefile.in: Regenerate.
60 * configure.in: AC_SUBST datarootdir, docdir, htmldir.
61 * configure: Regenerate.
62 * doc/Makefile.am: Add install-html and install-html-am targets.
63 * doc/Makefile.in: Regenerate.
64
65 2006-04-06 Alan Modra <amodra@bigpond.net.au>
66
67 * frags.c (frag_offset_fixed_p): Reinitialise offset before
68 second scan.
69
70 2006-04-05 Richard Sandiford <richard@codesourcery.com>
71 Daniel Jacobowitz <dan@codesourcery.com>
72
73 * config/tc-sparc.c (sparc_target_format): Handle TE_VXWORKS.
74 (GOTT_BASE, GOTT_INDEX): New.
75 (tc_gen_reloc): Don't alter relocations against GOTT_BASE and
76 GOTT_INDEX when generating VxWorks PIC.
77 * configure.tgt (sparc*-*-vxworks*): Remove this special case;
78 use the generic *-*-vxworks* stanza instead.
79
80 2006-04-04 Alan Modra <amodra@bigpond.net.au>
81
82 PR 997
83 * frags.c (frag_offset_fixed_p): New function.
84 * frags.h (frag_offset_fixed_p): Declare.
85 * expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
86 (resolve_expression): Likewise.
87
88 2006-04-03 Sterling Augustine <sterling@tensilica.com>
89
90 * config/tc-xtensa.c (init_op_placement_info_table): Check for formats
91 of the same length but different numbers of slots.
92
93 2006-03-30 Andreas Schwab <schwab@suse.de>
94
95 * configure.in: Fix help string for --enable-targets option.
96 * configure: Regenerate.
97
98 2006-03-28 Nathan Sidwell <nathan@codesourcery.com>
99
100 * gas/config/tc-m68k.c (find_cf_chip): Merge into ...
101 (m68k_ip): ... here. Use for all chips. Protect against buffer
102 overrun and avoid excessive copying.
103
104 * config/tc-m68k.c (m68000_control_regs, m68010_control_regs,
105 m68020_control_regs, m68040_control_regs, m68060_control_regs,
106 mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs,
107 mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs,
108 mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ...
109 (m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl,
110 mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl,
111 mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl,
112 mcf5282_ctrl, mcfv4e_ctrl): ... these.
113 (mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New.
114 (struct m68k_cpu): Change chip field to control_regs.
115 (current_chip): Remove.
116 (control_regs): New.
117 (m68k_archs, m68k_extensions): Adjust.
118 (m68k_cpus): Reorder to be in cpu number order. Adjust.
119 (CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove.
120 (find_cf_chip): Reimplement for new organization of cpu table.
121 (select_control_regs): Remove.
122 (mri_chip): Adjust.
123 (struct save_opts): Save control regs, not chip.
124 (s_save, s_restore): Adjust.
125 (m68k_lookup_cpu): Give deprecated warning when necessary.
126 (m68k_init_arch): Adjust.
127 (md_show_usage): Adjust for new cpu table organization.
128
129 2006-03-25 Bernd Schmidt <bernd.schmidt@analog.com>
130
131 * config/bfin-defs.h (Expr_Node_Type enum): Add Expr_Node_GOT_Reloc.
132 * config/bfin-lex.l: Recognize GOT17M4 and FUNCDESC_GOT17M4.
133 * config/bfin-parse.y: Include "libbfd.h", "elf/common.h" and
134 "elf/bfin.h".
135 (GOT17M4, FUNCDESC_GOT17M4): New tokens of type <value>.
136 (any_gotrel): New rule.
137 (got): Use it, and create Expr_Node_GOT_Reloc nodes.
138 * config/tc-bfin.c: Include "libbfd.h", "elf/common.h" and
139 "elf/bfin.h".
140 (DEFAULT_FLAGS, bfin_flags, bfin_pic_flag): New.
141 (bfin_pic_ptr): New function.
142 (md_pseudo_table): Add it for ".picptr".
143 (OPTION_FDPIC): New macro.
144 (md_longopts): Add -mfdpic.
145 (md_parse_option): Handle it.
146 (md_begin): Set BFD flags.
147 (md_apply_fix3, bfin_fix_adjustable): Handle new relocs.
148 (bfin_gen_ldstidxi): Adjust to match the trees that the parser gives
149 us for GOT relocs.
150 * Makefile.am (bfin-parse.o): Update dependencies.
151 (DEPTC_bfin_elf): Likewise.
152 * Makefile.in: Regenerate.
153
154 2006-03-25 Richard Sandiford <richard@codesourcery.com>
155
156 * config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
157 mcfemac instead of mcfmac.
158
159 2006-03-22 Richard Sandiford <richard@codesourcery.com>
160 Daniel Jacobowitz <dan@codesourcery.com>
161 Phil Edwards <phil@codesourcery.com>
162 Zack Weinberg <zack@codesourcery.com>
163 Mark Mitchell <mark@codesourcery.com>
164 Nathan Sidwell <nathan@codesourcery.com>
165
166 * config/tc-mips.c (mips_target_format): Handle vxworks targets.
167 (md_begin): Complain about -G being used for PIC. Don't change
168 the text, data and bss alignments on VxWorks.
169 (reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
170 generating VxWorks PIC.
171 (load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
172 (macro): Likewise, but do not treat la $25 specially for
173 VxWorks PIC, and do not handle jal.
174 (OPTION_MVXWORKS_PIC): New macro.
175 (md_longopts): Add -mvxworks-pic.
176 (md_parse_option): Don't complain about using PIC and -G together here.
177 Handle OPTION_MVXWORKS_PIC.
178 (md_estimate_size_before_relax): Always use the first relaxation
179 sequence on VxWorks.
180 * config/tc-mips.h (VXWORKS_PIC): New.
181
182 2006-03-21 Paul Brook <paul@codesourcery.com>
183
184 * config/tc-arm.c (md_apply_fix): Fix typo in offset mask.
185
186 2006-03-21 Sterling Augustine <sterling@tensilica.com>
187
188 * config/tc-xtensa.c (enforce_three_byte_loop_align): New flag.
189 (xtensa_setup_hw_workarounds): Set this new flag for older hardware.
190 (get_loop_align_size): New.
191 (xtensa_end): Skip xtensa_mark_narrow_branches when not aligning.
192 (xtensa_mark_zcl_first_insns): Prevent widening of first loop frag.
193 (get_text_align_power): Rewrite to handle inputs in the range 2-8.
194 (get_noop_aligned_address): Use get_loop_align_size.
195 (get_aligned_diff): Likewise.
196
197 2006-03-21 Paul Brook <paul@codesourcery.com>
198
199 * config/tc-arm.c (insns): Correct opcodes for ldrbt and strbt.
200
201 2006-03-20 Paul Brook <paul@codesourcery.com>
202
203 * config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
204 (do_t_branch): Encode branches inside IT blocks as unconditional.
205 (do_t_cps): New function.
206 (do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
207 do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
208 (opcode_lookup): Allow conditional suffixes on all instructions in
209 Thumb mode.
210 (md_assemble): Advance condexec state before checking for errors.
211 (insns): Use do_t_cps.
212
213 2006-03-20 Paul Brook <paul@codesourcery.com>
214
215 * config/tc-arm.c (output_relax_insn): Call dwarf2_emit_insn before
216 outputting the insn.
217
218 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
219
220 * config/tc-vax.c: Update copyright year.
221 * config/tc-vax.h: Likewise.
222
223 2006-03-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
224
225 * config/tc-vax.c (md_chars_to_number): Used only locally, so
226 make it static.
227 * config/tc-vax.h (md_chars_to_number): Remove obsolete declaration.
228
229 2006-03-17 Paul Brook <paul@codesourcery.com>
230
231 * config/tc-arm.c (insns): Add ldm and stm.
232
233 2006-03-17 Ben Elliston <bje@au.ibm.com>
234
235 PR gas/2446
236 * doc/as.texinfo (Ident): Document this directive more thoroughly.
237
238 2006-03-16 Paul Brook <paul@codesourcery.com>
239
240 * config/tc-arm.c (insns): Add "svc".
241
242 2006-03-13 Bob Wilson <bob.wilson@acm.org>
243
244 * config/tc-xtensa.c (xg_translate_sysreg_op): Remove has_underbar
245 flag and avoid double underscore prefixes.
246
247 2006-03-10 Paul Brook <paul@codesourcery.com>
248
249 * config/tc-arm.c (md_begin): Handle EABIv5.
250 (arm_eabis): Add EF_ARM_EABI_VER5.
251 * doc/c-arm.texi: Document -meabi=5.
252
253 2006-03-10 Ben Elliston <bje@au.ibm.com>
254
255 * app.c (do_scrub_chars): Simplify string handling.
256
257 2006-03-07 Richard Sandiford <richard@codesourcery.com>
258 Daniel Jacobowitz <dan@codesourcery.com>
259 Zack Weinberg <zack@codesourcery.com>
260 Nathan Sidwell <nathan@codesourcery.com>
261 Paul Brook <paul@codesourcery.com>
262 Ricardo Anguiano <anguiano@codesourcery.com>
263 Phil Edwards <phil@codesourcery.com>
264
265 * config/tc-arm.c (md_apply_fix): Install a value of zero into a
266 BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
267 R_ARM_ABS12 reloc.
268 (tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
269 relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
270 relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
271
272 2006-03-06 Bob Wilson <bob.wilson@acm.org>
273
274 * config/tc-xtensa.c (xtensa_post_relax_hook): Generate literal tables
275 even when using the text-section-literals option.
276
277 2006-03-06 Nathan Sidwell <nathan@codesourcery.com>
278
279 * config/tc-m68k.c (m68k_extensions): Allow 'float' on both m68k
280 and cf.
281 (m68k_ip): <case 'J'> Check we have some control regs.
282 (md_parse_option): Allow raw arch switch.
283 (m68k_init_arch): Better detection of arch/cpu mismatch. Detect
284 whether 68881 or cfloat was meant by -mfloat.
285 (md_show_usage): Adjust extension display.
286 (m68k_elf_final_processing): Adjust.
287
288 2006-03-03 Bjoern Haase <bjoern.m.haase@web.de>
289
290 * config/tc-avr.c (avr_mod_hash_value): New function.
291 (md_apply_fix, exp_mod): Use BFD_RELOC_HH8_LDI and
292 BFD_RELOC_MS8_LDI for hlo8() and hhi8()
293 (md_begin): Set linkrelax variable to 1, use avr_mod_hash_value
294 instead of int avr_ldi_expression: use avr_mod_hash_value instead
295 of (int).
296 (tc_gen_reloc): Handle substractions of symbols, if possible do
297 fixups, abort otherwise.
298 * config/tc-avr.h (TC_LINKRELAX_FIXUP, TC_VALIDATE_FIX,
299 tc_fix_adjustable): Define.
300
301 2006-03-02 James E Wilson <wilson@specifix.com>
302
303 * config/tc-ia64.c (emit_one_bundle): For IA64_OPCODE_LAST, if we
304 change the template, then clear md.slot[curr].end_of_insn_group.
305
306 2006-02-28 Jan Beulich <jbeulich@novell.com>
307
308 * macro.c (get_any_string): Don't insert quotes for <>-quoted input.
309
310 2006-02-28 Jan Beulich <jbeulich@novell.com>
311
312 PR/1070
313 * macro.c (getstring): Don't treat parentheses special anymore.
314 (get_any_string): Don't consider '(' and ')' as quoting anymore.
315 Special-case '(', ')', '[', and ']' when dealing with non-quoting
316 characters.
317
318 2006-02-28 Mat <mat@csail.mit.edu>
319
320 * dwarf2dbg.c (get_filenum): Don't inadvertently decrease files_in_use.
321
322 2006-02-27 Jakub Jelinek <jakub@redhat.com>
323
324 * dw2gencfi.c (struct fde_entry, struct cie_entry): Add signal_frame
325 field.
326 (CFI_signal_frame): Define.
327 (cfi_pseudo_table): Add .cfi_signal_frame.
328 (dot_cfi): Handle CFI_signal_frame.
329 (output_cie): Handle cie->signal_frame.
330 (select_cie_for_fde): Don't share CIE if signal_frame flag is
331 different. Copy signal_frame from FDE to newly created CIE.
332 * doc/as.texinfo: Document .cfi_signal_frame.
333
334 2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
335
336 * doc/Makefile.am: Add html target.
337 * doc/Makefile.in: Regenerate.
338 * po/Make-in: Add html target.
339
340 2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
341
342 * config/tc-i386.c (output_insn): Support Intel Merom New
343 Instructions.
344
345 * config/tc-i386.h (CpuMNI): New.
346 (CpuUnknownFlags): Add CpuMNI.
347
348 2006-02-24 David S. Miller <davem@sunset.davemloft.net>
349
350 * config/tc-sparc.c (priv_reg_table): Add entry for "gl".
351 (hpriv_reg_table): New table for hyperprivileged registers.
352 (sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged
353 register encoding.
354
355 2006-02-24 DJ Delorie <dj@redhat.com>
356
357 * config/tc-m32c.h (md_apply_fix): Define to m32c_apply_fix.
358 (tc_gen_reloc): Don't define.
359 * config/tc-m32c.c (rl_for, relaxable): New convenience macros.
360 (OPTION_LINKRELAX): New.
361 (md_longopts): Add it.
362 (m32c_relax): New.
363 (md_parse_options): Set it.
364 (md_assemble): Emit relaxation relocs as needed.
365 (md_convert_frag): Emit relaxation relocs as needed.
366 (md_cgen_lookup_reloc): Add LAB_8_8 and LAB_8_16.
367 (m32c_apply_fix): New.
368 (tc_gen_reloc): New.
369 (m32c_force_relocation): Force out jump relocs when relaxing.
370 (m32c_fix_adjustable): Return false if relaxing.
371
372 2006-02-24 Paul Brook <paul@codesourcery.com>
373
374 * config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
375 arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
376 (struct asm_barrier_opt): Define.
377 (arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
378 (parse_psr): Accept V7M psr names.
379 (parse_barrier): New function.
380 (enum operand_parse_code): Add OP_oBARRIER.
381 (parse_operands): Implement OP_oBARRIER.
382 (do_barrier): New function.
383 (do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
384 (do_t_cpsi): Add V7M restrictions.
385 (do_t_mrs, do_t_msr): Validate V7M variants.
386 (md_assemble): Check for NULL variants.
387 (v7m_psrs, barrier_opt_names): New tables.
388 (insns): Add V7 instructions. Mark V6 instructions absent from V7M.
389 (md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
390 (arm_cpu_option_table): Add Cortex-M3, R4 and A8.
391 (arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
392 (struct cpu_arch_ver_table): Define.
393 (cpu_arch_ver): New.
394 (aeabi_set_public_attributes): Use cpu_arch_ver. Set
395 Tag_CPU_arch_profile.
396 * doc/c-arm.texi: Document new cpu and arch options.
397
398 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
399
400 * config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.
401
402 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
403
404 * config/tc-ia64.c: Update copyright years.
405
406 2006-02-22 H.J. Lu <hongjiu.lu@intel.com>
407
408 * config/tc-ia64.c (specify_resource): Add the rule 17 from
409 SDM 2.2.
410
411 2005-02-22 Paul Brook <paul@codesourcery.com>
412
413 * config/tc-arm.c (do_pld): Remove incorrect write to
414 inst.instruction.
415 (encode_thumb32_addr_mode): Use correct operand.
416
417 2006-02-21 Paul Brook <paul@codesourcery.com>
418
419 * config/tc-arm.c (md_apply_fix): Fix off-by-one errors.
420
421 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
422 Anil Paranjape <anilp1@kpitcummins.com>
423 Shilin Shakti <shilins@kpitcummins.com>
424
425 * Makefile.am: Add xc16x related entry.
426 * Makefile.in: Regenerate.
427 * configure.in: Added xc16x related entry.
428 * configure: Regenerate.
429 * config/tc-xc16x.h: New file
430 * config/tc-xc16x.c: New file
431 * doc/c-xc16x.texi: New file for xc16x
432 * doc/all.texi: Entry for xc16x
433 * doc/Makefile.texi: Added c-xc16x.texi
434 * NEWS: Announce the support for the new target.
435
436 2006-02-16 Nick Hudson <nick.hudson@dsl.pipex.com>
437
438 * configure.tgt: set emulation for mips-*-netbsd*
439
440 2006-02-14 Jakub Jelinek <jakub@redhat.com>
441
442 * config.in: Rebuilt.
443
444 2006-02-13 Bob Wilson <bob.wilson@acm.org>
445
446 * config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
447 from 1, not 0, in error messages.
448 (md_assemble): Simplify special-case check for ENTRY instructions.
449 (tinsn_has_invalid_symbolic_operands): Do not include opcode and
450 operand in error message.
451
452 2006-02-13 Joseph S. Myers <joseph@codesourcery.com>
453
454 * configure.tgt (arm-*-linux-gnueabi*): Change to
455 arm-*-linux-*eabi*.
456
457 2006-02-10 Nick Clifton <nickc@redhat.com>
458
459 * config/tc-crx.c (check_range): Ensure that the sign bit of a
460 32-bit value is propagated into the upper bits of a 64-bit long.
461
462 * config/tc-arc.c (init_opcode_tables): Fix cast.
463 (arc_extoper, md_operand): Likewise.
464
465 2006-02-09 David Heine <dlheine@tensilica.com>
466
467 * config/tc-xtensa.c (xg_assembly_relax): Increment steps_taken for
468 each relaxation step.
469
470 2006-02-09 Eric Botcazou <ebotcazou@libertysurf.fr>
471
472 * configure.in (CHECK_DECLS): Add vsnprintf.
473 * configure: Regenerate.
474 * messages.c (errno.h, stdarg.h, varargs.h, va_list): Do not
475 include/declare here, but...
476 * as.h: Move code detecting VARARGS idiom to the top.
477 (errno.h, stdarg.h, varargs.h, va_list): ...here.
478 (vsnprintf): Declare if not already declared.
479
480 2006-02-08 H.J. Lu <hongjiu.lu@intel.com>
481
482 * as.c (close_output_file): New.
483 (main): Register close_output_file with xatexit before
484 dump_statistics. Don't call output_file_close.
485
486 2006-02-07 Nathan Sidwell <nathan@codesourcery.com>
487
488 * config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
489 mcf5329_control_regs): New.
490 (not_current_architecture, selected_arch, selected_cpu): New.
491 (m68k_archs, m68k_extensions): New.
492 (archs): Renamed to ...
493 (m68k_cpus): ... here. Adjust.
494 (n_arches): Remove.
495 (md_pseudo_table): Add arch and cpu directives.
496 (find_cf_chip, m68k_ip): Adjust table scanning.
497 (no_68851, no_68881): Remove.
498 (md_assemble): Lazily initialize.
499 (select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
500 (md_init_after_args): Move functionality to m68k_init_arch.
501 (mri_chip): Adjust table scanning.
502 (md_parse_option): Reimplement 'm' processing to add -march & -mcpu
503 options with saner parsing.
504 (m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
505 m68k_init_arch): New.
506 (s_m68k_cpu, s_m68k_arch): New.
507 (md_show_usage): Adjust.
508 (m68k_elf_final_processing): Set CF EF flags.
509 * config/tc-m68k.h (m68k_init_after_args): Remove.
510 (tc_init_after_args): Remove.
511 * doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
512 (M68k-Directives): Document .arch and .cpu directives.
513
514 2006-02-05 Arnold Metselaar <arnold.metselaar@planet.nl>
515
516 * config/tc-z80.c (z80_start_line_hook): allow .equ and .defl as
517 synonyms for equ and defl.
518 (z80_cons_fix_new): New function.
519 (emit_byte): Disallow relative jumps to absolute locations.
520 (emit_data): Only handle defb, prototype changed, because defb is
521 now handled as pseudo-op rather than an instruction.
522 (instab): Entries for defb,defw,db,dw moved from here...
523 (md_pseudo_table): ... to here, use generic cons() for defw,dw.
524 Add entries for def24,def32,d24,d32.
525 (md_assemble): Improved error handling.
526 (md_apply_fix): New case BFD_RELOC_24, set fixP->fx_no_overflow to one.
527 * config/tc-z80.h (TC_CONS_FIX_NEW): Define.
528 (z80_cons_fix_new): Declare.
529 * doc/c-z80.texi (defb, db): Mention warning on overflow.
530 (def24,d24,def32,d32): New pseudo-ops.
531
532 2006-02-02 Paul Brook <paul@codesourcery.com>
533
534 * config/tc-arm.c (do_shift): Remove Thumb-1 constraint.
535
536 2005-02-02 Paul Brook <paul@codesourcery.com>
537
538 * config/tc-arm.c (T2_OPCODE_MASK, T2_DATA_OP_SHIFT, T2_OPCODE_AND,
539 T2_OPCODE_BIC, T2_OPCODE_ORR, T2_OPCODE_ORN, T2_OPCODE_EOR,
540 T2_OPCODE_ADD, T2_OPCODE_ADC, T2_OPCODE_SBC, T2_OPCODE_SUB,
541 T2_OPCODE_RSB): Define.
542 (thumb32_negate_data_op): New function.
543 (md_apply_fix): Use it.
544
545 2006-01-31 Bob Wilson <bob.wilson@acm.org>
546
547 * config/xtensa-istack.h (TInsn): Remove record_fix and sub_symbol
548 fields.
549 * config/tc-xtensa.h (xtensa_frag_type): Remove slot_sub_symbols field.
550 * config/tc-xtensa.c (md_apply_fix): Check for unexpected uses of
551 subtracted symbols.
552 (relaxation_requirements): Add pfinish_frag argument and use it to
553 replace setting tinsn->record_fix fields.
554 (xg_assemble_vliw_tokens): Adjust calls to relaxation_requirements
555 and vinsn_to_insnbuf. Remove references to record_fix and
556 slot_sub_symbols fields.
557 (xtensa_mark_narrow_branches): Delete unused code.
558 (is_narrow_branch_guaranteed_in_range): Handle expr that is not just
559 a symbol.
560 (convert_frag_immed): Adjust vinsn_to_insnbuf call and do not set
561 record_fix fields.
562 (tinsn_immed_from_frag): Remove code for handling slot_sub_symbols.
563 (vinsn_to_insnbuf): Change use of record_fixup argument, replacing use
564 of the record_fix field. Simplify error messages for unexpected
565 symbolic operands.
566 (set_expr_symbol_offset_diff): Delete.
567
568 2006-01-31 Paul Brook <paul@codesourcery.com>
569
570 * config/tc-arm.c (arm_reg_parse): Check if reg is non-NULL.
571
572 2006-01-31 Paul Brook <paul@codesourcery.com>
573 Richard Earnshaw <rearnsha@arm.com>
574
575 * config/tc-arm.c: Use arm_feature_set.
576 (arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none,
577 arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1,
578 fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2):
579 New variables.
580 (insns): Use them.
581 (md_atof, opcode_select, opcode_select, md_assemble, md_assemble,
582 md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch,
583 arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes,
584 s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU
585 feature flags.
586 (arm_legacy_option_table, arm_option_cpu_value_table): New types.
587 (arm_opts): Move old cpu/arch options from here...
588 (arm_legacy_opts): ... to here.
589 (md_parse_option): Search arm_legacy_opts.
590 (arm_cpus, arm_archs, arm_extensions, arm_fpus)
591 (arm_float_abis, arm_eabis): Make const.
592
593 2006-01-25 Bob Wilson <bob.wilson@acm.org>
594
595 * config/tc-xtensa.c (md_apply_fix): Set value to zero for PLT relocs.
596
597 2006-01-21 Jie Zhang <jie.zhang@analog.com>
598
599 * config/bfin-parse.y (asm_1): Check value range for 16 bit immediate
600 in load immediate intruction.
601
602 2006-01-21 Jie Zhang <jie.zhang@analog.com>
603
604 * config/bfin-parse.y (value_match): Use correct conversion
605 specifications in template string for __FILE__ and __LINE__.
606 (binary): Ditto.
607 (unary): Ditto.
608
609 2006-01-18 Alexandre Oliva <aoliva@redhat.com>
610
611 Introduce TLS descriptors for i386 and x86_64.
612 * config/tc-i386.c (tc_i386_fix_adjustable): Handle
613 BFD_RELOC_386_TLS_GOTDESC, BFD_RELOC_386_TLS_DESC_CALL,
614 BFD_RELOC_X86_64_GOTPC32_TLSDESC, BFD_RELOC_X86_64_TLSDESC_CALL.
615 (optimize_disp): Emit fix up for BFD_RELOC_386_TLS_DESC_CALL and
616 BFD_RELOC_X86_64_TLSDESC_CALL immediately, and clear the
617 displacement bits.
618 (build_modrm_byte): Set up zero modrm for TLS desc calls.
619 (lex_got): Handle @tlsdesc and @tlscall.
620 (md_apply_fix, tc_gen_reloc): Handle the new relocations.
621
622 2006-01-11 Nick Clifton <nickc@redhat.com>
623
624 Fixes for building on 64-bit hosts:
625 * config/tc-avr.c (mod_index): New union to allow conversion
626 between pointers and integers.
627 (md_begin, avr_ldi_expression): Use it.
628 * config/tc-i370.c (md_assemble): Add cast for argument to print
629 statement.
630 * config/tc-tic54x.c (subsym_substitute): Likewise.
631 * config/tc-mn10200.c (md_assemble): Use a union to convert the
632 opindex field of fr_cgen structure into a pointer so that it can
633 be stored in a frag.
634 * config/tc-mn10300.c (md_assemble): Likewise.
635 * config/tc-frv.c (frv_debug_tomcat): Use %p to print pointer
636 types.
637 * config/tc-v850.c: Replace uses of (int) casts with correct
638 types.
639
640 2006-01-09 H.J. Lu <hongjiu.lu@intel.com>
641
642 PR gas/2117
643 * symbols.c (snapshot_symbol): Don't change a defined symbol.
644
645 2006-01-03 Hans-Peter Nilsson <hp@bitrange.com>
646
647 PR gas/2101
648 * config/tc-mmix.c (mmix_handle_mmixal): Don't treat #[0-9][FB] as
649 a local-label reference.
650
651 For older changes see ChangeLog-2005
652 \f
653 Local Variables:
654 mode: change-log
655 left-margin: 8
656 fill-column: 74
657 version-control: never
658 End: