1 2007-10-30 Nick Clifton <nickc@redhat.com>
3 * doc/as.texinfo (Section): Replace "subsegment" with
6 2007-10-27 H.J. Lu <hongjiu.lu@intel.com>
9 * config/obj-elf.c (obj_elf_section): Handle optional
10 parameters for .pushsection.
12 * doc/as.texinfo: Document optional parameters for
15 2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
17 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
18 * configure: Regenerated.
20 2007-10-24 Alan Modra <amodra@bigpond.net.au>
22 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
24 * configure.in: Invoke AC_GNU_SOURCE.
25 * Makefile.in: Regenerate.
26 * config.in: Regenerate.
27 * configure: Regenerate.
29 2007-10-19 Nick Clifton <nickc@redhat.com>
31 * expr.c (expr): Test md_allow_local_subtract (if defined) before
32 allowing the evaluation of an expression involving two symbols
33 defined in the same section.
34 * doc/internals.texi (md_allow_local_subtract): Document the new
36 * config/tc-mn10300.h (md_allow_local_subtract): Define.
37 (RELAX_EXPANSION_POSSIBLE): Define.
38 (MAX_RELOC_EXPANSION): Define.
39 (TC_FRAG_TYPE): Define.
40 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
41 (tc_gen_reloc): Return an array of relocs. If necessary generate
42 two relocs to handle an expressions involving the difference of
44 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
45 when then fixup is not pc-relative.
46 (mn10300_allow_local_subtract): New function. Determine when it
47 is safe to compute the difference between two symbols at assemble
50 2007-10-19 Alan Modra <amodra@bigpond.net.au>
52 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
53 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
54 chars that can start a name.
56 2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
58 * config/tc-hppa.c (pa_ip): Fix comment typo.
61 2007-10-18 Nick Clifton <nickc@redhat.com>
64 * config/tc-arc.c (md_estimate_size_before_relax): Change error
66 (md_convert_frag): Just call abort.
67 * config/tc-i860.c (md_estimate_size_before_relax): Change error
69 * config/tc-i860.h (md_convert_frag): Just call abort.
70 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
72 (md_convert_frag): Just call abort.
73 * config/tc-m68k.c (m68k_ip): Do not attempt translation of
76 * config/tc-arm.c: Fix formatting and spelling errors.
78 * config/tc-xc16x.c: Fix formatting and internationalization.
79 * po/gas.pot: Regenerate.
81 2007-10-17 Nick Clifton <nickc@redhat.com>
84 * as.h (ieee_md_atof, vax_md_atof): New prototypes.
85 * read.c (s_float_space): Allow a zero length return from md_atof
86 if the error message has been set.
87 (float_cons): Likewise.
88 * config/atof-ieee.c (ieee_md_atof): New function. Performs the
89 md_atof() function in a generic way for IEEE using targets.
90 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
91 same error message as ieee_md_atof.
92 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
93 * tc-arc.c (md_atof): Use ieee_md_atof.
94 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
95 constant 2. Use a precision of 5 for the 'x' and 'p' types.
96 * tc-avr.c (md_atof): Use ieee_md_atof.
97 * tc-bfin.c (md_atof): Use ieee_md_atof.
98 * tc-cr16.c (md_atof): Use ieee_md_atof.
99 * tc-crx.c (md_atof): Use ieee_md_atof.
100 * tc-d10v.c (md_atof): Use ieee_md_atof.
101 * tc-d30v.c (md_atof): Use ieee_md_atof.
102 * tc-dlx.c (md_atof): Use ieee_md_atof.
103 * tc-fr30.c (md_atof): Use ieee_md_atof.
104 * tc-frv.c (md_atof): Use ieee_md_atof.
105 * tc-h8300.c (md_atof): Use ieee_md_atof.
106 * tc-hppa.c (md_atof): Use ieee_md_atof.
107 * tc-i370.c (md_atof): Use ieee_md_atof.
108 (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
109 * tc-i386.c (md_atof): Use ieee_md_atof.
110 * tc-i860.c (md_atof): Use ieee_md_atof.
111 * tc-i960.c (md_atof): Use ieee_md_atof.
112 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
113 * tc-ip2k.c (md_atof): Use ieee_md_atof.
114 * tc-iq2000.c (md_atof): Use ieee_md_atof.
115 * tc-m32c.c (md_atof): Use ieee_md_atof.
116 * tc-m32r.c (md_atof): Use ieee_md_atof.
117 * tc-m68hc11.c (md_atof): Use ieee_md_atof.
118 * tc-m68k.c (md_atof): Use ieee_md_atof.
119 * tc-maxq.c (md_atof): Use ieee_md_atof.
120 * tc-mcore.c (md_atof): Use ieee_md_atof.
121 * tc-mep.c (md_atof): Use ieee_md_atof.
122 * tc-mips.c (md_atof): Use ieee_md_atof.
123 * tc-mmix.c (md_atof): Use ieee_md_atof.
124 * tc-mn10200.c (md_atof): Use ieee_md_atof.
125 * tc-mn10300.c (md_atof): Use ieee_md_atof.
126 * tc-msp430.c (md_atof): Use ieee_md_atof.
127 * tc-mt.c (md_atof): Use ieee_md_atof.
128 * tc-ns32k.c (md_atof): Use ieee_md_atof.
129 * tc-openrisc.c (md_atof): Use ieee_md_atof.
130 * tc-or32.c (md_atof): Use ieee_md_atof.
131 * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
132 * tc-pj.c (md_atof): Use ieee_md_atof.
133 * tc-ppc.c (md_atof): Use ieee_md_atof.
134 * tc-s390.c (md_atof): Use ieee_md_atof.
135 * tc-score.c (md_atof): Use ieee_md_atof.
136 * tc-sh.c (md_atof): Use ieee_md_atof.
137 * tc-sparc.c (md_atof): Use ieee_md_atof.
138 * tc-spu.c (md_atof): Use ieee_md_atof.
139 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
140 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
141 * tc-tic54.c (md_atof): Use ieee_md_atof.
142 * tc-v850.c (md_atof): Use ieee_md_atof.
143 * tc-vax.c (md_atof): New function. Call vax_md_atof.
144 * tc-xc16x.c (md_atof): Use ieee_md_atof.
145 * tc-xstormy16.c (md_atof): Use ieee_md_atof.
146 * tc-xtensa.c (md_atof): Use ieee_md_atof.
147 * tc-z8k.c (md_atof): Use ieee_md_atof.
148 * doc/internals.texi: Update description of md_atof function.
149 * po/gas.pot: Regenerate.
151 2007-10-16 Bob Wilson <bob.wilson@acm.org>
153 * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
155 2007-10-16 Nick Clifton <nickc@redhat.com>
157 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
159 * doc/as.texinfo (.type): Document the types accepted by the
160 type pseudo op, including "common".
162 2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
164 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
165 according to major opcode number.
167 2007-10-15 Alan Modra <amodra@bigpond.net.au>
169 * read.c (do_s_func): Check asprintf return status.
170 * stabs.c (stabs_generate_asm_func): Likewise.
171 (stabs_generate_asm_endfunc): Likewise.
173 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
175 * config/tc-i386.c (process_operands): Simplify implicit xmm0
178 2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
180 * config/tc-i386.c (process_operands): Check the firstxmm0
181 field in opcode_modifier for instruction with a implicit
182 xmm0 as the first operand.
184 2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
186 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
188 * doc/c-avr.texi: Document new devices.
190 2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
192 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
193 instruction range information.
195 2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
197 * doc/as.texinfo (Object Attributes): New chapter.
198 (Pseudo Ops): Document .gnu_attribute.
199 (LNS directives): Correct .loc_mark_labels documentation.
201 2007-10-11 Nick Clifton <nickc@redhat.com>
203 * config/obj-elf.c (obj_elf_section): When pushing a section, if
204 there is a comma then the following argument must be a subsection
207 2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
209 * doc/c-i386.texi: Update which instruction's operands are
212 2007-10-11 Nick Clifton <nickc@redhat.com>
215 * config/tc-ia64.c: Allow for translations of error and warning
217 * po/gas.pot: Regenerate.
220 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
222 * po/gas.pot: Regenerate.
225 * config/tc-msp430.c: Fix spelling typos.
227 2007-10-11 Nick Clifton <nickc@redhat.com>
229 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
231 2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
233 * config/tc-mips.c (AT): Rename to...
235 (AT): New definition.
236 (mips_set_options): Rename "noat" to "at"; change the type.
237 (mips_opts): Update accordingly.
238 (append_insn): Likewise.
239 (macro_build_ldst_constoffset): Likewise.
240 (load_address): Likewise.
241 (macro, macro2): Likewise.
242 (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
245 2007-10-08 Nick Clifton <nickc@redhat.com>
247 * doc/as.texinfo (Previous): Clarify explanation of the behaviour
248 of this pseudo-op and add a couple of examples.
250 2007-10-08 Nick Clifton <nickc@redhat.com>
252 PR gas/5121 gas/5122 gas/5123
253 * Makefile.am (CFILES): Add cgen.c
254 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
255 tc-tic4x.c and xtensa-relax.c.
256 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
257 tc-tic4x.h and xtensa-relax.h.
258 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
259 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
260 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
261 (CONFIG_ATOF_CFILES): New variable.
262 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
263 dependency upon TARG_ENV_HFILES.
264 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
265 cgen-desc.h when foo-desc.h does not exit.
267 * Makefile.in: Regenerate.
268 * doc/Makefile.in: Regenerate.
269 * po/POTFILES.in: Regenerate.
271 * po/es.po: Regenerate.
272 * po/fr.po: Regenerate.
273 * po/gas.pot: Regenerate.
274 * po/rw.po: Regenerate.
275 * po/tr.po: Regenerate.
276 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
279 * config/obj-som.c: Likewise.
281 * config/tc-arc.c: Likewise.
283 * config/tc-arm.c: Likewise.
285 * config/tc-bfin.c: Likewise.
287 * config/tc-frv.c: Likewise.
289 * config/tc-dlx.c: Likewise.
291 2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
293 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
294 ATtiny48, AT90PWM216, AT90PWM316.
295 * doc/c-avr.texi: Document new devices.
297 2007-10-08 Nick Clifton <nickc@redhat.com>
300 * config/tc-arm.c (md_apply_fix): Correct error message.
302 * config/tc-arm.c (md_apply_fix): Likewise.
304 * config/tc-bfin.c (md_apply_fix): Fix error message.
306 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
308 2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
310 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
311 immediate operands directly for instructions with 4 operands.
313 2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
316 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
317 is ignored in Intel mode.
319 2007-10-04 Helge Deller <deller@gmx.de>
321 * read.c (potable): Add string8, string16, string32 and string64.
322 Add bit size for stringer function.
323 (stringer_append_char): New.
324 (stringer): Use stringer_append_char().
325 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
326 * config/obj-elf.c (obj_elf_ident): Likewise.
327 * config/tc-alpha.c (s_alpha_stringer): Likewise.
328 * config/tc-dlx.c (dlx_pseudo_table): Likewise.
329 * config/tc-hppa.c (pa_stringer): Likewise.
330 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
331 * config/tc-m68hc11.c (md_pseudo_table): Likewise.
332 * config/tc-mcore.c (md_pseudo_table): Likewise.
333 * config/tc-mips.c (mips_pseudo_table): Likewise.
334 * config/tc-spu.c (md_pseudo_table): Likewise.
335 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
336 * doc/as.texinfo (ABORT): Fix identing.
337 (String): Document new string8, string16, string32, string64
339 * NEWS: Mention the new feature.
341 2007-10-03 Nick Clifton <nickc@redhat.com>
344 * config/tc-avr.c (avr_get_constant): Extend error message to
345 mention that the constant must be positive.
347 2007-10-03 Nick Clifton <nickc@redhat.com>
349 * config/tc-avr.c (avr_get_constant):
351 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
353 (md_assemble): Fix spelling typo.
355 2007-10-03 Alan Modra <amodra@bigpond.net.au>
358 * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
360 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
362 * config/tc-cr16.c: Replaced 'tabs' with white spaces and
363 added R_CR16_DISP8 as default reloc type for b<cc> instructions.
365 2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
368 * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
369 (check_qword_reg): Also handle cvttsd2si.
371 2007-09-27 Kazu Hirata <kazu@codesourcery.com>
373 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
374 (last_movec_reg): Change to MBO.
375 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
376 (m68k_ip): Use MBO instead of MBO.
377 (init_table): Use MBO instead of MBO. Add an entry for mbo.
379 2007-09-26 Jan Beulich <jbeulich@novell.com>
381 * config/tc-i386.c (build_modrm_byte): Also check for RegEip
382 when considering IP-relative addressing.
384 2007-09-26 Jan Beulich <jbeulich@novell.com>
386 * config/tc-i386.h (md_register_arithmetic): Define.
387 * config/tc-ia64.h (md_register_arithmetic): Likewise.
388 * doc/internals.texi: Document md_register_arithmetic.
389 * expr.c (make_expr_symbol): Force O_register expressions into
391 (expr): Provide default for md_register_arithmetic. Don't resolve
392 adding/subtracting constants to/from registers if
393 md_register_arithmetic is zero.
395 2007-09-26 Jan Beulich <jbeulich@novell.com>
397 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
398 (cfi_finish): Add second empty instance.
400 2007-09-26 Jan Beulich <jbeulich@novell.com>
402 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
403 with simple call to parse_operand.
405 2007-09-26 Jan Beulich <jbeulich@novell.com>
407 * config/tc-i386.c (NUM_FLAG_CODE): Remove.
409 2007-09-26 Jan Beulich <jbeulich@novell.com>
411 * as.c (itbl_parse): Remove #define.
412 (struct itbl_file_list): Move down and ...
413 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
414 (show_usage): Conditionalize printing of --itbl option upon
416 (parse_args): Conditionalize handling of -t/--itbl options upon
417 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
420 2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
422 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
425 2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
427 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
428 (BRANCHBWPL, FRAG_VAR_SIZE): New.
429 (md_relax_table): Add BRANCHBWPL entries.
430 (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
431 (md_assemble): Use FRAG_VAR_SIZE.
432 (md_convert_frag_1): Add BRANCHBWPL cases.
433 (md_estimate_size_before_relaz): Likewise.
435 2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
437 * config/tc-mips.c (s_align): Set max_alignment to 28.
439 2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
442 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
443 (set_allow_index_reg): New.
444 (allow_index_reg): Likewise.
445 (md_pseudo_table): Add "allow_index_reg" and
446 "disallow_index_reg".
447 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
448 fake index registers.
449 (i386_scale): Updated.
450 (i386_index_check): Support fake index registers.
451 (parse_real_register): Return NULL on eiz/riz if fake index
452 registers aren't allowed.
454 2007-09-19 Nick Clifton <nickc@redhat.com>
456 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
459 2007-09-19 Bob Wilson <bob.wilson@acm.org>
461 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
463 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
465 * config/bfin-parse.y (asm_1): Slightly improve error messages
468 2007-09-18 Alan Modra <amodra@bigpond.net.au>
471 * read.c (emit_expr): Only use long long if required and available.
473 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
475 * config/tc-i386.c (baseindex): Removed.
476 (build_modrm_byte): Check reg_num for RIP register instead of
478 (i386_index_check): Likewise.
480 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
483 * config/obj-coff.c (obj_coff_endef): Remove checking size of
484 def_symbol_in_progress.
486 2007-09-17 Evandro Menezes <evandro@yahoo.com>
489 * read.c (emit_expr): Use unsigned long long values in warning
490 message about truncated expressions.
492 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
494 * config/tc-i386.c (intel_e04): Revert the last change.
496 2007-09-17 Nick Clifton <nickc@redhat.com>
498 * po/es.po: Updated Spanish translation.
500 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
503 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
506 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
508 * config/tc-i386.c (build_modrm_byte): Adjust comment line
511 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
513 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
516 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
518 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
520 2007-09-14 Michael Meissner <michael.meissner@amd.com>
521 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
522 Tony Linthicum <tony.linthicum@amd.com>
524 * NEWS: Add SSE5 support to NEWS file.
526 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
527 and build_modrm_byte to communicate.
528 (DREX_OC0): New SSE5 macro.
529 (DREX_OC0_MASK): Ditto.
531 (DREX_OC1_MASK): Ditto.
532 (DREX_XMEM_X1_X2_X2): Ditto.
533 (DREX_X1_XMEM_X2_X2): Ditto.
534 (DREX_X1_XMEM_X2_X1: Ditto.
535 (DREX_X1_X2_XMEM_X1: Ditto.
536 (DREX_XMEM_X1_X2): Ditto.
537 (DREX_X1_XMEM_X2): Ditto.
538 (drex_byte): New structure to describe the DREX byte.
540 * config/tc-i386.c (process_drex): New function to handle SSE5
542 (build_modrm_byte): Use the information cached away in
543 process_drex in the case of DREX instructions.
544 (i386_insn): Add drex field.
545 (pi): Add debugging of drex field.
546 (md_assemble): Treat SSE5 like SSE3 in instructions with an
547 immediate byte. Move REX field to DREX if this is a DREX
549 (process_operands): Add SSE5 support.
550 (build_modrm_byte): Ditto.
551 (output_insn): Ditto.
553 (i386_align_code): Ditto.
555 2007-09-12 Jan Beulich <jbeulich@novell.com>
557 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
558 after generic operand swapping, and swap only the immediate operands.
560 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
562 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
563 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
565 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
567 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
570 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
572 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
573 (cpu_flags_check_cpu64): This. Inline.
574 (uints_all_zero): New.
575 (uints_set): Likewise
576 (uints_equal): Likewise
577 (UINTS_ALL_ZERO): Likewise
578 (UINTS_SET): Likewise
579 (UINTS_CLEAR): Likewise
580 (UINTS_EQUAL): Likewise
581 (cpu_flags_and): Likewise.
582 (cpu_flags_or): Likewise.
583 (operand_type_and): Likewise.
584 (operand_type_or): Likewise.
585 (operand_type_xor): Likewise.
586 (cpu_flags_not): Inline and use switch instead of loop.
587 (cpu_flags_match): Updated.
588 (operand_type_match): Likewise.
589 (smallest_imm_type): Likewise.
590 (set_cpu_arch): Likewise.
592 (md_assemble): Likewise.
593 (parse_insn): Likewise.
594 (optimize_imm): Likewise.
595 (match_template): Likewise.
596 (process_suffix): Likewise.
597 (update_imm): Likewise.
598 (finalize_imm): Likewise.
599 (process_operands): Likewise.
600 (build_modrm_byte): Likewise.
601 (i386_immediate): Likewise.
602 (i386_displacement): Likewise.
603 (i386_index_check): Likewise.
604 (i386_operand): Likewise.
605 (i386_target_format): Likewise.
606 (intel_e11): Likewise.
607 (operand_type): Remove implicitregister.
608 (operand_type_check): Updated. Inline.
609 (cpu_flags_all_zero): Removed.
610 (operand_type_all_zero): Likewise.
611 (i386_array_biop): Likewise.
612 (cpu_flags_biop): Likewise.
613 (operand_type_biop): Likewise.
615 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
617 * Makefile.am: Run "make dep-am".
618 * Makefile.in: Regenerate.
620 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
622 * configure.in (AC_CHECK_HEADERS): Add limits.h.
623 * configure: Regenerated.
624 * config.in: Likewise.
626 * config/tc-i386.c: Include "opcodes/i386-init.h".
627 (_i386_insn): Use i386_operand_type for types.
628 (cpu_arch_flags): Updated to new types with bitfield.
629 (cpu_arch_tune_flags): Likewise.
630 (cpu_arch_isa_flags): Likewise.
631 (cpu_arch): Likewise.
632 (i386_align_code): Likewise.
633 (set_code_flag): Likewise.
634 (set_16bit_gcc_code_flag): Likewise.
635 (set_cpu_arch): Likewise.
636 (md_assemble): Likewise.
637 (parse_insn): Likewise.
638 (process_operands): Likewise.
639 (output_branch): Likewise.
640 (output_jump): Likewise.
641 (parse_real_register): Likewise.
642 (mode_from_disp_size): Likewise.
643 (smallest_imm_type): Likewise.
645 (type_names): Likewise.
648 (swap_2_operands): Likewise.
649 (optimize_imm): Likewise.
650 (optimize_disp): Likewise.
651 (match_template): Likewise.
652 (check_string): Likewise.
653 (process_suffix): Likewise.
654 (check_byte_reg): Likewise.
655 (check_long_reg): Likewise.
656 (check_qword_reg): Likewise.
657 (check_word_reg): Likewise.
658 (finalize_imm): Likewise.
659 (build_modrm_byte): Likewise.
660 (output_insn): Likewise.
661 (disp_size): Likewise.
662 (imm_size): Likewise.
663 (output_disp): Likewise.
664 (output_imm): Likewise.
666 (i386_immediate): Likewise.
667 (i386_displacement): Likewise.
668 (i386_index_check): Likewise.
669 (i386_operand): Likewise.
670 (parse_real_register): Likewise.
671 (i386_intel_operand): Likewise.
672 (intel_e09): Likewise.
673 (intel_bracket_expr): Likewise.
674 (intel_e11): Likewise.
675 (cpu_arch_flags_not): New.
676 (cpu_flags_check_x64): Likewise.
677 (cpu_flags_all_zero): Likewise.
678 (cpu_flags_not): Likewise.
679 (i386_cpu_flags_biop): Likewise.
680 (cpu_flags_biop): Likewise.
681 (cpu_flags_match); Likewise.
685 (reg16_inoutportreg): Likewise.
689 (disp16_32): Likewise.
691 (baseindex): Likewise.
699 (imm16_32): Likewise.
700 (imm16_32s): Likewise.
701 (imm16_32_32s): Likewise.
702 (operand_type): Likewise.
703 (operand_type_check): Likewise.
704 (operand_type_match): Likewise.
705 (operand_type_register_match): Likewise.
706 (update_imm): Likewise.
707 (set_code_flag): Also update cpu_arch_flags_not.
708 (set_16bit_gcc_code_flag): Likewise.
709 (md_begin): Likewise.
710 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
711 Use cpu_flags_match to match instructions.
712 (i386_target_format): Update cpu_arch_isa_flags and
713 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
714 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
715 (match_template): Don't initialize overlap0, overlap1,
716 overlap2, overlap3 and operand_types.
717 (process_suffix): Handle crc32 with 64bit register.
719 (CONSISTENT_REGISTER_MATCH): Likewise.
721 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
724 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
726 * config/tc-i386.c (match_template): Handle invlpga, vmload,
727 vmrun and vmsave in SVME.
728 (process_suffix): Likewise.
730 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
732 * config/tc-i386.c (i386_index_check): Don't use RegRex
733 on the reg_type field.
734 (parse_real_register): Use `||' instead of `|'.
736 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
738 * config/tc-i386.c (process_operands): Remove segment override
739 check on SVME instructions.
740 (i386_index_check): Remove memory operand check on SVME
743 2007-09-04 Alan Modra <amodra@bigpond.net.au>
745 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
746 (md_assemble): Update init of insn. Use insn.reloc instead of
747 calculating from flag.
748 (get_imm): Set reloc rather than flag.
749 (calcop): Formatting.
751 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
753 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
755 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
757 * doc/c-arc.texi: Fix typo.
759 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
761 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
764 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
766 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
767 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
769 (m68k_cpus): Adjust 5407 entry.
771 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
773 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
774 (m68k_cpus): Define 51QE cpu.
776 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
777 Joseph Myers <joseph@codesourcery.com>
779 * as.c (main): Flush stderr before printing listings to ensure
780 consistent output order across platforms.
782 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
784 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
786 2007-08-24 Joseph Myers <joseph@codesourcery.com>
787 Paul Brook <paul@codesourcery.com>
790 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
791 * as.c (show_usage): Document --debug-prefix-map option.
792 (parse_args): Handle --debug-prefix-map.
793 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
794 * stabs.c (stabs_generate_asm_file): Remap debug paths.
795 * Makefile.am (GAS_CFILES): Add remap.c
796 (GENERIC_OBJS): Add remap.o.
797 Regenerate dependencies.
798 * Makefile.in: Regenerate.
799 * doc/as.texinfo (--debug-prefix-map): Document.
801 2007-08-24 Aurelien Jarno <aurel32@debian.org>
803 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
804 before printing them.
806 2007-08-24 Anders Waldenborg <anders@0x63.nu>
807 Alan Modra <amodra@bigpond.net.au>
809 * config/tc-i386.c (lex_got): Don't scan past a comma.
811 2007-08-23 Ben Elliston <bje@au.ibm.com>
813 * config/tc-ppc.c (parse_cpu): Handle "750cl".
814 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
815 (md_show_usage): Document -m750cl.
816 (md_assemble): Handle two delimiters in succession (eg. `),').
817 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
818 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
819 * testsuite/gas/ppc/ppc750ps.s: New file.
820 * testsuite/gas/ppc/ppc750ps.d: Likewise.
822 2007-08-23 Ben Elliston <bje@au.ibm.com>
824 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
826 2007-08-17 Alan Modra <amodra@bigpond.net.au>
829 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
831 (i386_immediate): Detect and complain about more cases of
832 invalid immediate expressions. Return failure rather than
833 converting them to zero.
834 (i386_displacement): Likewise.
836 2007-08-17 Alan Modra <amodra@bigpond.net.au>
838 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
840 2007-08-14 Andreas Schwab <schwab@suse.de>
842 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
845 2007-08-12 Matthias Klose <doko@ubuntu.com>
847 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
848 $(top_srcdir)/../../bfd/doc.
849 * doc/Makefile.in: Regenerate.
851 2007-08-10 Nick Clifton <nickc@redhat.com>
853 * NEWS: Add a marker for the 2.18 features.
855 2007-08-09 Paul Brook <paul@codesourcery.com>
857 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
859 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
861 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
863 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
865 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
866 DWORD memory to Reg64 in Intel synax.
867 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
868 Reg32 in Intel syntax.
870 2007-07-25 Sterling Augustine <sterling@tensilica.com>
872 * config/tc-xtensa.c (xtensa_extui_opcode): New.
873 (xg_expand_assembly_insn): Check for invalid extui operands.
874 (md_begin): Initialize xtensa_extui_opcode.
876 2007-07-24 Nick Clifton <nickc@redhat.com>
878 * config/tc-mep.h (skip_whitespace): Remove definition.
880 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
882 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
885 (f32_patt): Remove f32_15.
886 (f16_patt): Likewise.
887 (i386_align_code): Updated to alt_long_patt for 64bit by
890 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
892 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
894 * config/tc-i386.c (i386_align_code): Enable alignment up to
895 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
898 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
900 2007-07-20 Nick Clifton <nickc@redhat.com>
902 * app.c (do_scrub_chars): Provide a one character buffer to hold a
903 pushed back newline at the end of an unterminated quoted string.
905 2007-07-14 Nick Clifton <nickc@redhat.com>
907 * config/tc-arm.c (create_register_alias): Return a boolean rather
909 Check the return value of insert_reg_alias and do not continue to
910 create aliases once an insertion has failed.
911 (s_unreq): Delete the all-upper-case and all-lower-case
912 alternatives as well.
914 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
916 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
919 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
921 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
924 2007-07-04 Richard Sandiford <richard@codesourcery.com>
926 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
927 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
928 Deprecate *x and *fx.
929 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
932 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
934 * config/obj-coff.h (x86_64_target_format): Renamed to ...
935 (i386_target_format): This
936 (TARGET_FORMAT): Use i386_target_format.
938 * config/tc-i386.c (x86_64_target_format): Removed.
939 (i386_target_format): Handle PE formats.
941 2007-07-04 Nick Clifton <nickc@redhat.com>
943 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
944 to get the right length of printed value.
946 2007-07-03 Nick Clifton <nickc@redhat.com>
948 * COPYING: Replace with GPLv3 text.
949 * app.c: Update copyright notice to refer to GPLv3.
950 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
951 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
952 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
953 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
954 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
955 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
956 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
957 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
958 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
959 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
960 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
961 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
962 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
963 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
964 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
965 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
966 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
967 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
968 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
969 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
970 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
971 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
972 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
973 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
974 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
975 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
976 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
977 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
978 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
979 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
980 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
981 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
982 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
983 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
984 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
985 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
986 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
987 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
988 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
989 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
990 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
991 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
992 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
993 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
994 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
995 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
996 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
997 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
998 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
999 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
1000 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
1001 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
1002 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
1003 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
1004 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
1005 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
1006 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
1007 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
1008 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
1009 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
1011 * flonum-mult.c: Likewise, and also correct typo referring to
1012 non-existant GNU Assembler General Public License.
1013 * config/tc-m68851.h: Likewise.
1014 * NEWS: Mention the new license. Also note where the 2.17 release
1016 * config/e-crisaout.c: Add copyright header.
1017 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
1018 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
1019 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
1020 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
1021 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
1022 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
1023 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
1024 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
1025 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
1026 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
1027 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
1028 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
1029 config/te-wince-pe.h: Likewise.
1031 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
1033 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
1034 (install_operand): Add E encoding.
1035 (md_begin): Check and skip initial '.' arg character.
1036 (get_num): Add 0..511 case.
1038 2007-07-03 Alan Modra <amodra@bigpond.net.au>
1041 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
1042 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
1044 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
1047 * app.c (do_scrub_chars <state 5>): Check for output buffer full
1050 2007-07-02 Joseph Myers <joseph@codesourcery.com>
1052 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
1053 s_dtprel_internal): New.
1054 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
1055 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
1056 BFD_RELOC_MIPS_TLS_DTPREL64.
1058 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1060 * Makefile.am: Run "make dep-am".
1061 * Makefile.in: Regenerate.
1062 * aclocal.m4: Regenerate.
1063 * config.in: Regenerate.
1064 * doc/Makefile.in: Regenerate.
1065 * po/POTFILES.in: Regenerate.
1066 * po/gas.pot: Regenerate.
1068 2007-07-02 Alan Modra <amodra@bigpond.net.au>
1070 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
1071 coff section flag values to bfd section flag.
1073 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
1075 * aclocal.m4: Regenerated.
1076 * doc/Makefile.in: Likewise.
1077 * Makefile.in: Likewise.
1079 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1081 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
1083 2007-06-29 Joseph Myers <joseph@codesourcery.com>
1085 * as.c (create_obj_attrs_section): New.
1086 (main): Call create_obj_attrs_section for ELF.
1087 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
1088 skip_past_comma, s_vendor_attribute): New.
1089 (potable): Add gnu_attribute for ELF.
1090 * read.h (s_vendor_attribute): Declare.
1091 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
1092 round s_vendor_attribute.
1093 (aeabi_set_public_attributes): Update for new attributes
1095 (arm_md_end): Remove attributes contents setting now done
1098 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
1100 * Makefile.am: Add CR16 related entry.
1101 * Makefile.in: Regenerate.
1102 * config/tc-cr16.h: New file
1103 * config/tc-cr16.c: New file
1104 * doc/c-cr16.texi: New file for cr16
1105 * doc/all.texi: Entry for cr16
1106 * doc/Makefile.am: Added c-cr16.texi
1107 * doc/Makefile.in: Regenerate
1108 * doc/as.texinfo: Entry for CR16 target
1109 * NEWS: Announce the support for the new target.
1111 2007-06-26 Paul Brook <paul@codesourcery.com>
1113 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
1115 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
1117 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
1119 * config/tc-i386.c (process_operands): Replace regKludge
1122 2007-06-25 Richard Sandiford <richard@codesourcery.com>
1124 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
1125 * config/tc-mips.c (append_insn): Record which symbols have
1126 R_MIPS16_26 relocations against them.
1127 (mips_fix_adjustable): Don't reduce relocations against such symbols.
1129 2007-06-22 Sterling Augustine <sterling@tensilica.com>
1131 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
1132 (frag_format_size): Handle RELAX_IMMED_STEP3.
1133 (xtensa_relax_frag, md_convert_frag): Likewise.
1134 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
1135 (RELAX_IMMED_MAXSTEPS): Adjust.
1136 * config/xtensa-relax.c (widen_spec_list): Add transitions from
1137 wide branches to branch-over-jumps.
1138 (build_transition): Handle wide branches in transition patterns.
1140 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
1142 * config/tc-i386.c (disp_size): New.
1143 (imm_size): Likewise.
1144 (output_disp): Use disp_size and imm_size.
1145 (output_imm): Use imm_size.
1147 2007-06-19 Sterling Augustine <sterling@tensilica.com>
1149 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
1150 use of literal_frag field.
1151 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
1152 in the literal_frag field.
1153 (xtensa_move_literals): Use it here instead of searching. Update
1154 literal_frag field with new value.
1156 2007-06-14 Paul Brook <paul@codesourcery.com>
1158 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1159 narrow shift by immediate.
1161 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
1163 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1165 * acinclude.m4: Don't include m4 files.
1166 (BFD_BINARY_FOPEN): Removed.
1167 Remove libtool kludge.
1169 * Makefile.in: Regenerated.
1170 * doc/Makefile.in: Likewise.
1171 * aclocal.m4: Likewise.
1172 * configure: Likewise.
1174 2007-06-11 Sterling Augustine <sterling@tensilica.com>
1175 Bob Wilson <bob.wilson@acm.org>
1177 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1178 (XTENSA_PROP_NO_TRANSFORM): ...this.
1179 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1180 (xtensa_mark_frags_for_org): New.
1181 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1182 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1183 (get_frag_property_flags): Adjust reference to is_no_transform flag.
1184 (xtensa_frag_flags_combinable): Likewise.
1185 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
1186 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1188 2007-06-06 Paul Brook <paul@codesourcery.com>
1190 * config/tc-arm.c (s_align): Pad code sections appropriately.
1192 2007-06-05 Paul Brook <paul@codesourcery.com>
1194 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1196 2007-06-05 Nick Clifton <nickc@redhat.com>
1199 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1201 2007-06-05 Alan Modra <amodra@bigpond.net.au>
1203 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
1205 (tc_gen_reloc): Abort if neither addsy or subsy is set.
1206 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1207 * config/tc-spu.h (md_operand): Handle @ppu without sym.
1209 2007-05-31 Paul Brook <paul@codesourcery.com>
1211 * config/tc-arm.c (insns): Allow strex on M profile cores.
1213 2007-05-29 David S. Miller <davem@davemloft.net>
1214 Jakub Jelinek <jakub@redhat.com>
1217 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1218 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1220 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1222 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
1224 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1226 * config/tc-ppc.c: Convert to ISO C.
1227 * config/tc-ppc.c: Likewise.
1229 2007-05-29 Alan Modra <amodra@bigpond.net.au>
1231 * write.h (EXEC_MACHINE_TYPE): Delete.
1232 (string_byte_count, section_alignment): Delete.
1234 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
1236 * app.c (do_scrub_chars): Cope with \ at end of buffer.
1238 2007-05-26 Alan Modra <amodra@bigpond.net.au>
1240 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1241 top 32 bits of 64 bit value if so doing results in passing
1242 range check. Rewrite sign extension fudges similarly. Enable
1243 fudges for powerpc64 too. Report user value if range check
1244 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
1245 range rather than value, also to report user value on failure.
1247 2007-03-25 Paul Brook <paul@codesourcery.com>
1249 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1250 (do_t_add_sub): Correctly encode subs pc, lr, #const.
1251 (do_t_mov_cmp): Correctly encode movs pc, lr.
1253 2007-05-24 Steve Ellcey <sje@cup.hp.com>
1255 * Makefile.in: Regnerate.
1256 * configure: Regenerate.
1257 * aclocal.m4: Regenerate.
1258 * doc/Makefile.in: Regenerate.
1260 2007-05-22 Bob Wilson <bob.wilson@acm.org>
1262 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1263 and index entries about automatic alignment of ENTRY instructions.
1265 2007-05-22 Nick Clifton <nickc@redhat.com>
1267 * doc/as.texinfo: Use @copying around the copyright notice.
1269 2007-05-18 Joseph Myers <joseph@codesourcery.com>
1271 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1274 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
1277 2003-06-05 Michal Ludvig <mludvig@suse.cz>
1278 * doc/as.texinfo: Document new directives: .cfi_restore,
1279 .cfi_undefined, .cfi_same_value, .cfi_return_column,
1280 .cfi_remember_state and .cfi_restore_state.
1282 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
1284 * config/tc-m68k.c (md_apply_fix): Show value of out of range
1285 fixups in error message.
1286 (md_conver_frag_1): Propagate the fix source location and use
1287 as_bad_where rather than fatal, for better error messages.
1289 2007-05-16 Paul Brook <paul@codesourcery.com>
1291 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1293 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
1295 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1297 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
1300 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1301 addend is stored for relocs against weak symbols.
1302 (md_apply_fix): So not loose track of addend for relocs against
1305 2007-05-14 Thiemo Seufer <ths@mips.com>
1307 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1309 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
1311 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1312 addri, addri.c, subi, and subi.c when immediate number is hex.
1313 (score_insns): Remove subis and subis.c.
1314 (do_sub_rdi16): Delete.
1316 2007-05-11 Alan Modra <amodra@bigpond.net.au>
1318 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
1320 (md_assemble): Tidy use of insn.flag.
1321 (get_imm): Likewise. Handle uppercase input too.
1322 (spu_cons): New function.
1323 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1324 (TC_FORCE_RELOCATION): Don't resolve them either.
1326 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
1328 * config/tc-arm.c (md_apply_fix): Generate more accurate
1329 diagnostic when 8-bit immediate range is exceeded for
1330 BFD_RELOC_ARM_OFFSET_IMM8.
1332 2007-05-04 Alan Modra <amodra@bigpond.net.au>
1335 * config/tc-i386.c (lex_got): Don't replace the reloc token with
1336 a space if we already have a space.
1338 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
1340 * config/tc-i386.c (match_template): Don't explicitly check
1341 suffix for crc32 in Intel mode.
1342 (process_suffix): Issue an error for crc32 if the operand size
1345 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
1346 Nick Clifton <nickc@redhat.com>
1349 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1350 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1351 (md_apply_fix): Put zero values into the frags referencing weak
1354 2007-05-02 Alan Modra <amodra@bigpond.net.au>
1357 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1360 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
1362 * config/tc-i386.c (match_template): Check suffix for crc32 in
1364 (process_suffix): Default the suffix of 8bit crc32 to
1366 (check_byte_reg): Skip check for 8bit crc32.
1368 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
1370 * config/tc-i386.c (md_assemble): Use register_prefix in
1371 error/warning message.
1372 (check_byte_reg): Likewise.
1373 (check_long_reg): Likewise.
1374 (check_qword_reg): Likewise.
1375 (check_word_reg): Likewise.
1376 (process_operands): Likewise.
1378 2007-04-30 Alan Modra <amodra@bigpond.net.au>
1381 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1384 2007-04-28 Thiemo Seufer <ths@networkno.de>
1386 * config/tc-mips.c: Fix comment.
1388 2007-04-26 Anatoly Sokolov <aesok@post.ru>
1390 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1391 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1392 * doc/c-avr.texi: Document new devices.
1394 2007-04-24 Alan Modra <amodra@bigpond.net.au>
1396 * Makefile.am: Run "make dep-am".
1397 * Makefile.in: Regenerate.
1399 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
1401 * config/tc-m68k.c (mcf54455_ctrl): New.
1402 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1403 (m68k_archs): Add isac.
1404 (m68k_cpus): Add 54455 family.
1405 (m68k_ip): Split Bg into Bb, Bs, Bg.
1406 (m68k_elf_final_processing): Add ISA_C.
1407 * doc/c-m68k.texi (M680x0 Options): Add isac.
1409 2007-04-22 Alan Modra <amodra@bigpond.net.au>
1411 * read.c (read_a_source_file): Skip multiple spaces to
1412 cover hack in mmix md_start_line_hook which overwrites a
1413 colon with a space. Delete sermon and needless assertion.
1415 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1417 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1418 (md_atof): Make number_of_chars unsigned. Revert last change.
1419 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1420 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1421 * config/tc-sh.h (md_optimize_expr): Likewise.
1422 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1424 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1426 2007-04-21 Nick Clifton <nickc@redhat.com>
1428 * config/atof-vax.c (md_atof): Fix comparison inside know().
1430 * config/tc-ia64.c (emit_one_bundle): Fix typo.
1432 2007-04-21 Alan Modra <amodra@bigpond.net.au>
1434 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1435 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1436 Don't skip over NUL char.
1437 (pseudo_set): Set X_op for registers to O_register.
1438 * symbols.c (symbol_clone): Remove assertion that sym is defined.
1439 (resolve_symbol_value): Resolve O_register symbols.
1440 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1441 Instead find st(0) by hash lookup.
1442 * config/tc-ppc.c (ppc_macro): Warning fix.
1444 * as.h (ENABLE_CHECKING): Default define to 0.
1445 (know): Assert if ENABLE_CHECKING.
1446 (struct relax_type): Remove superfluous declaration.
1447 * configure.in (--enable-checking): New.
1448 * configure: Regenerate.
1449 * config.in: Regenerate.
1450 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1451 Check for duplicate powerpc_operands entries.
1453 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1455 * config/tc-m68k.c (mcf5253_ctrl): New.
1456 (mcf52223_ctrl): New.
1457 (m68k_cpus): Add 5253, 52221, 52223.
1459 * config/m68k-parse.h (RAMBAR_ALT): New.
1460 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1461 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1462 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1463 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1464 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1466 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1467 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1468 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1469 to control register mapping.
1471 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1473 * messages.c (as_internal_value_out_of_range): Fix typo in
1474 error message. Return after printing domain error.
1475 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1476 in max when shifting right.
1478 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1480 * messages.c (as_internal_value_out_of_range): Extend to report
1481 errors for values with invalid low bits set.
1482 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1483 fields. Check that operands and opcode fields are disjoint.
1484 (ppc_insert_operand): Check operands using mask rather than bit
1485 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1487 (md_apply_fix): Adjust for struct powerpc_operand change.
1489 2007-04-19 Paul Brook <paul@codesourcery.com>
1491 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1492 Thumb-1. Add sanity check for bogus relaxations.
1494 2007-04-19 Paul Brook <paul@codesourcery.com>
1496 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1498 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1500 * Makefile.am: Run "make dep-am".
1501 * Makefile.in: Regenerate.
1503 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1505 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1507 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1509 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1511 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1513 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1514 (match_template): Handle operand size for crc32 in SSE4.2.
1515 (process_suffix): Handle operand type for crc32 in SSE4.2.
1516 (output_insn): Support SSE4.2.
1518 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1520 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1521 (process_operands): Adjust implicit operand for blendvpd,
1522 blendvps and pblendvb in SSE4.1.
1523 (output_insn): Support SSE4.1.
1525 2007-04-18 Paul Brook <paul@codesourcery.com>
1527 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1529 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1531 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1532 of as_warn_where for misaligned data.
1534 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1536 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1539 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1541 * Makefile.am: Add ACLOCAL_AMFLAGS.
1542 * Makefile.in: Regenerate.
1544 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1546 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1547 (sh_optimize_expr): Likewise.
1548 * config/tc-sh.h (md_optimize_expr): Define.
1549 (sh_optimize_expr): Prototype.
1551 2007-04-06 Matt Thomas <matt@netbsd.org>
1553 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1554 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1555 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1557 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1559 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1561 2007-04-04 Paul Brook <paul@codesourcery.com>
1563 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1564 (insns): Use I15 for vext.
1566 2007-04-04 Paul Brook <paul@codesourcery.com>
1568 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1570 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1572 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1573 outputting_stabs_line_debug.
1575 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1577 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1578 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1580 * doc/c-avr.texi: Document new devices.
1582 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1584 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1585 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1586 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1588 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1589 Bob Wilson <bob.wilson@acm.org>
1591 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1592 Do not check is_loop_target flag.
1593 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1594 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1595 xtensa_move_labels for alignment of loop opcodes.
1597 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1599 * config/tc-i386.c (process_suffix): Reindent a bit.
1601 2007-03-30 Paul Brook <paul@codesourcery.com>
1603 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1604 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1605 (do_t_push_pop): Use encode_thumb2_ldmstm.
1607 2007-03-29 DJ Delorie <dj@redhat.com>
1609 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1610 (md_relax_table): Add entries for ADJNZ macros.
1611 (M32C_Macros): Add ADJNZ macros.
1612 (subtype_mappings): Add entries for ADJNZ macros.
1613 (insn_to_subtype): Check for adjnz and sbjnz insns.
1614 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1615 (md_convert_frag): Convert adjnz and sbjnz.
1617 2007-03-29 Nick Clifton <nickc@redhat.com>
1619 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1621 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1622 using ITBL_NUMBER_OF_PROCESSORS.
1623 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1625 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1627 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1628 register operands, encode destination in i.rm.regmem if its
1631 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1632 Phil Edwards <phil@codesourcery.com>
1634 * doc/as.texinfo: Put the contents after the title page rather
1635 than at the end of the document.
1637 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1639 * NEWS: Mention ".reloc".
1641 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1643 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1644 in FLIX instructions.
1646 2007-03-26 Julian Brown <julian@codesourcery.com>
1648 * config/tc-arm.c (arm_it): Add immisfloat field.
1649 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1650 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1651 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1653 (neon_cmode_for_move_imm): Reject non-float immediates for float
1655 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1657 2007-03-26 Julian Brown <julian@codesourcery.com>
1659 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1661 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1663 * doc/as.texinfo (Reloc): Document.
1664 * read.c (potable): Add "reloc".
1665 (s_reloc): New function.
1666 * write.c (reloc_list): New global var.
1667 (resolve_reloc_expr_symbols): New function.
1668 (write_object_file): Call it.
1669 (write_relocs): Process reloc_list.
1670 * write.h (struct reloc_list): New.
1671 (reloc_list): Declare.
1673 2007-03-24 Paul Brook <paul@codesourcery.com>
1675 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1677 2007-03-24 Paul Brook <paul@codesourcery.com>
1678 Mark Shinwell <shinwell@codesourcery.com>
1680 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1681 (parse_operands): Don't expect comma if first operand missing.
1683 (do_srs): Encode register number, checking it is r13. Update comment.
1684 (insns): Update SRS entries to take a register.
1686 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1688 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1690 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1692 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1693 attempt to jump to the next instruction into NOPs.
1695 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1697 * config/tc-spu.c: Don't include opcode/spu.h.
1698 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1699 (md_apply_fix): Adjust.
1700 * config/tc-spu.h: Include opcode/spu.h.
1701 (struct tc_fix_info): New.
1702 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1703 (TC_FORCE_RELOCATION): Define.
1705 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1707 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1709 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1711 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1712 xchg for xchg %rax,%rax.
1714 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1716 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1717 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1719 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1722 * config/tc-i386.c (match_template): Properly handle 64bit mode
1725 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1728 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1730 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1732 * Makefile.am: Run dep-am.
1733 * Makefile.in: Regenerated.
1735 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1737 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1738 (NOP_OPCODE): Removed.
1739 (template): Likewise.
1741 2007-03-21 Andreas Schwab <schwab@suse.de>
1743 * config/tc-i386.h (NOP_OPCODE): Restore.
1745 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1747 * config/tc-arm.c (do_mul): Don't warn about overlapping
1748 Rd and Rm operands when assembling for v6 or above.
1749 Correctly capitalize register names in the messages.
1750 (do_mlas): Likewise. Delete spurious blank line.
1752 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1754 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1756 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1758 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1760 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1763 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1766 * app.c (do_scrub_chars): PUT after setting states.
1768 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1770 * Makefile.am: Run "make dep-am".
1771 * Makefile.in: Regenerated.
1773 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1775 (md_begin): Check reg_name != NULL for the last entry in
1778 * config/tc-i386.h: Move many entries to opcode/i386.h and
1781 * configure.in (need_opcodes): Set true for i386.
1782 * configure: Regenerated.
1784 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1786 * Makefile.am (REPORT_BUGS_TO): Removed.
1787 (INCLUDES): Remove -DREPORT_BUGS_TO.
1788 * Makefile.in: Regenerated.
1790 * configure.in (--with-bugurl): Removed.
1791 * configure: Regenerated.
1793 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1794 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1795 (TEXI2DVI): Likewise.
1796 (gasver.texi): Removed.
1797 (MOSTLYCLEANFILES): Remove gasver.texi.
1798 (as.1): Don't depend on gasver.texi.
1799 * doc/Makefile.in: Regenerated.
1801 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1803 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1805 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1806 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1807 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1808 * gas/symbols.c (copy_symbol_attributes): Use
1809 TC_COPY_SYMBOL_ATTRIBUTES.
1811 2007-03-14 Paul Brook <paul@codesourcery.com>
1813 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1815 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1818 * write.c (relax_segment): Insert extra alignment padding
1819 to break infinite relax loop when given impossible
1820 gcc_except_table assembly.
1822 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1824 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1825 on i.tm.base_opcode.
1826 (match_template): Likewise.
1827 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1829 * config/tc-i386.h (Opcode_D): New.
1830 (Opcode_FloatR): Likewise.
1831 (Opcode_FloatD): Likewise.
1834 (FloatMF): Likewise.
1838 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1840 * app.c (do_scrub_chars): Recognize comments after # line "file".
1841 * read.c (get_linefile_number): New.
1842 (s_app_line): Accept ill-formed .linefile lines as comments.
1844 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1846 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1848 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1850 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1851 * as.h (new_logical_line_flags): New.
1852 * input-scrub.c (new_logical_line): Turned into wrapper for...
1853 (new_logical_line_flags): this. Handle flags.
1854 * read.c (potable): Add linefile. Adjust appline argument.
1855 (s_app_file): Fake .appfiles no more.
1856 (s_app_line): For .linefile, accept file name and flags.
1858 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1860 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1862 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1864 * Makefile.am: Run "make dep-am".
1865 * Makefile.in: Regenerate.
1866 * po/POTFILES.in: Regenerate.
1868 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1870 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1872 * doc/Makefile.am (gasver.texi): Define BUGURL.
1873 * doc/as.texinfo: Use BUGURL.
1874 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1876 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1878 * config/tc-s390.c (md_parse_option): z9-ec option added.
1880 2007-03-02 Paul Brook <paul@codesourcery.com>
1882 * config/tc-arm.c (relax_immediate): Always return positive values.
1883 (relaxed_symbol_addr): New function.
1884 (relax_adr, relax_branch): Use it.
1885 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1887 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1889 * as.c (parse_args): Update copyright date.
1891 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1893 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1895 2007-02-28 Nick Clifton <nickc@redhat.com>
1898 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1899 just return -1 whenever a problem is encountered.
1900 (md_assemble): If do_assemble returns -1 generate a non-fatal
1901 error message and return.
1904 * config/tc-msp430.c (line_separator_char): Change to '{'.
1906 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1908 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1909 (build_jump_insn): Likewise.
1910 (build_insn): Likewise.
1911 (s_m68hc11_relax): Likewise.
1913 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1915 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1917 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1919 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1921 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1923 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1924 (md_assemble): Likewise.
1926 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1928 * write.c (size_seg): Always clear SEC_RELOC here.
1929 (install_reloc): New function, extracted from..
1930 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1931 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1932 testing frag size. Set SEC_RELOC here.
1934 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1937 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1939 2007-02-20 Thiemo Seufer <ths@mips.com>
1941 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1943 2007-02-20 Thiemo Seufer <ths@mips.com>
1945 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1947 2007-02-20 Thiemo Seufer <ths@mips.com>
1948 Chao-Ying Fu <fu@mips.com>
1950 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1951 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1952 (macro_build): Add case '2'.
1953 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1954 (validate_mips_insn): Add support for balign instruction.
1955 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1956 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1957 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1958 command line options.
1959 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1960 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1961 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1962 .set dspr2, .set nodspr2.
1964 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1966 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1967 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1969 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1971 * write.c (TC_FX_SIZE_SLACK): Define.
1972 (write_relocs): Reinstate check for fixup within frag.
1973 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1974 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1975 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1976 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1977 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1979 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1980 Nathan Sidwell <nathan@codesourcery.com>
1981 Vladimir Prus <vladimir@codesourcery.com
1982 Joseph Myers <joseph@codesourcery.com>
1984 * configure.in (--with-bugurl): New option.
1985 * configure: Regenerate.
1986 * dep-in.sed: Remove bin-bugs.h.
1987 * Makefile.am (REPORT_BUGS_TO): Define.
1988 (INCLUDES): Define REPORT_BUGS_TO.
1989 (DEP_INCLUDES): Likewise.
1990 ($(OBJS)): No longer depend on bin-bugs.h.
1991 * Makefile.in: Regenerate.
1992 * doc/Makefile.in: Regenerate.
1993 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1994 * as.h: Remove include of bin-bugs.h.
1996 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1998 * write.c: White space fixes.
1999 (fixup_segment): Move symbol_mri_common_p adjustments..
2000 (write_relocs): ..and symbol_equated_reloc_p adjustments..
2001 (adjust_reloc_syms): ..to here.
2003 2007-02-16 Alan Modra <amodra@bigpond.net.au>
2005 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
2006 xmalloc, memset. Don't bother assigning NULL to known zero mem.
2007 (subseg_set_rest): Remove unnecessary cast.
2008 * write.c: Include libbfd.h. Replace PTR with void * throughout.
2009 Remove unnecessary forward declarations and casts.
2010 (set_symtab): Delete extern bfd_alloc.
2011 (fixup_segment): Move.
2013 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
2015 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
2016 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
2017 (mcf5475_ctrl, mcf5485_ctrl): New.
2018 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
2019 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
2020 (init_table): Add asid, mmubar, adjust rombar0.
2022 2007-02-14 Alan Modra <amodra@bigpond.net.au>
2024 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
2025 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
2026 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
2027 code, and test for these insns using a combination of
2028 opcode_modifier and operand_types.
2030 2007-02-07 Paul Brook <paul@codesourcery.com>
2032 * configure.tgt: Add arm*-*-uclinux-*eabi.
2034 2007-02-05 Dave Brolley <brolley@redhat.com>
2035 Richard Sandiford <rsandifo@redhat.com>
2036 DJ Delorie <dj@redhat.com>
2037 Stan Cox <scox@redhat.com>
2038 Jim Blandy <jimb@redhat.com>
2039 Nick Clifton <nickc@redhat.com>
2040 Jim Wilson <wilson@redhat.com>
2041 Frank Ch. Eigler <fche@redhat.com>
2042 Graydon Hoare <graydon@redhat.com>
2043 Ben Elliston <bje@redhat.com>
2044 John Healy <jhealy@redhat.com>
2045 Richard Henderson <rth@redhat.com>
2047 * Makefile.am (CPU_TYPES): Add mep.
2048 (TARGET_CPU_CFILES): Add tc-mep.c.
2049 (TARGET_CPU_HFILES): Add tc-mep.h.
2050 (DEPTC_mep_elf): New variable.
2051 (DEPTC_mep_coff): Likewise.
2052 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
2053 * configure.in: Support mep.
2054 * configure.tgt: Likewise.
2055 * config/tc-mep.c: New file.
2056 * config/obj-elf.c: New file.
2057 * config/tc-mep.c: New file.
2058 * config/tc-mep.h: New file.
2059 * testsuite/gas/mep: New testsuite with content.
2060 * Makefile.in: Regenerate.
2061 * configure: Regenerate.
2063 2007-02-05 Dave Brolley <brolley@redhat.com>
2065 * cgen.c (gas_cgen_install_complex_reloc): Removed.
2066 (complex_reloc_installation_howto): Removed.
2068 2007-02-05 Dave Brolley <brolley@redhat.com>
2069 Graydon Hoare <graydon@redhat.com>
2070 DJ Delorie <dj@redhat.com>
2071 Catherine Moore <clm@redhat.com>
2072 Michael Chastain <chastain@redhat.com>
2073 Frank Ch. Eigler <fche@redhat.com>
2075 * symbols.c (use_complex_relocs_for): New, to decide
2076 when to use complex relocs. Add signed RELC support.
2077 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
2078 encode expression symbols as mangled complex relocation symbols (when
2079 compiled with -DOBJ_COMPLEX_RELOC).
2080 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
2081 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
2082 encode_addend with new args. Modify to get start, length from
2083 ifield whenever it is set. Also change condition on which
2084 self-describing relocs are encoded. Add hook into
2085 gas_cgen_encode_addend.
2086 (queue_fixup_recursively): Add signed RELC support. Change from masked
2087 expr to trunc flag. Restore assignment of sub-field value to
2088 temporary in fixups array. Reflect changed meaning of last arg to
2089 queue_fixup_recursively.
2090 (fixup): Add cgen_maybe_multi_ifield member.
2091 (make_right_shifted_expr): New function.
2092 (queue_fixup): Change to recursive function that fragments
2093 fixups if operand has a multi-ifield.
2094 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
2095 symbols, call weak_operand_overflow_check, and fragment call
2096 queue_fixup with operand fields.
2097 (gas_cgen_finish_insn) Modify to manage ifield pointer.
2098 (weak_operand_overflow_check): New function to try to select
2100 (gas_cgen_encode_addend): New function for relc.
2101 (gas_cgen_install_complex_reloc): Likewise.
2102 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
2103 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
2104 cgen_maybe_multi_ifield field to fx_cgen substructure.
2105 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
2106 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
2108 2007-02-03 DJ Delorie <dj@delorie.com>
2110 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
2112 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
2113 (m32c_cons_fix_new): Prototype.
2115 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2117 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
2118 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
2120 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2122 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
2123 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
2124 (map_suffix_reloc_to_operator): New.
2125 (map_operator_to_reloc): New.
2126 (expression_maybe_register): Fix incorrect test of return value from
2127 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
2128 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
2130 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2132 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
2133 (tinsn_get_tok): Delete prototype.
2134 * config/tc-xtensa.c (tinsn_get_tok): Delete.
2136 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2138 * config/xtensa-relax.h (struct build_instr): Delete id field.
2139 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
2141 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
2142 set op_data fields to zero.
2143 (parse_id_constant): Delete.
2144 (build_transition): Remove code to handle numbered literals and labels.
2146 2007-02-02 Bob Wilson <bob.wilson@acm.org>
2148 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
2149 (build_transition_table): Likewise.
2151 2007-02-01 Bob Wilson <bob.wilson@acm.org>
2153 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2155 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2157 2007-02-02 Alan Modra <amodra@bigpond.net.au>
2159 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2160 (struct fix <fx_plt>): Rename to tcbit2.
2161 * write.c (fix_new_internal): Adjust.
2162 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2163 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2164 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2165 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2166 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2167 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2168 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2169 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2170 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2171 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2172 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2173 Instead, compare fx_r_type.
2174 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2175 fx_tcbit in place of fx_plt.
2176 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2177 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2180 2007-01-30 Nick Clifton <nickc@redhat.com>
2182 * as.c (main): Mark symbols created via the --defsym command line
2183 option as volatile so that they can be overridden later on by a
2184 .set directive. This maintains compatibility with the behaviour
2185 of earlier versions of the assembler.
2186 * doc/as.texinfo (--defsym): Document that the defined symbol's
2187 value can be overridden via a .set directive.
2189 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
2191 * config/tc-i386.c (swap_imm_operands): Renamed to ...
2192 (swap_2_operands): This. Take 2 ints.
2193 (md_assemble): Updated.
2194 (swap_operands): Call swap_2_operands to swap 2 operands.
2196 2007-01-24 DJ Delorie <dj@redhat.com>
2198 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2200 2007-01-22 Nick Clifton <nickc@redhat.com>
2203 * tc-score.c: Remove unnecessary uses of _().
2204 Make the err_msg[] a file level local array in order to save
2206 Remove unnecessary sprintf()s.
2208 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
2211 * config/tc-score.c : Using _() for const string.
2212 Do not assign inst.error with a local string pointer.
2213 (md_section_align): Pad section.
2215 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
2217 * config/tc-i386.c (build_modrm_byte): Check number of operands
2218 when procssing memory/register operand.
2220 2007-01-12 Nick Clifton <nickc@redhat.com>
2223 * macro.c (expand_irp): Do not ignore spaces inside quoted
2226 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2228 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2229 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2230 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2231 (TC_FORCE_RELOCATION): Define.
2232 (TC_FORCE_RELOCATION_LOCAL): Define.
2233 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2235 2007-01-12 Alan Modra <amodra@bigpond.net.au>
2237 * input-file.c (input_file_open): Check fgets return.
2239 2007-01-11 Paul Brook <paul@codesourcery.com>
2241 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2243 2007-01-11 Nick Clifton <nickc@redhat.com>
2246 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2249 * config/tc-mcore.c (md_number_to_chars): Use
2250 number_to_chars_{big|little}endian.
2252 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
2254 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2255 architecture by itself.
2256 (m68k_ip): Don't issue a warning for tbl instructions on fido.
2257 (m68k_elf_final_processing): Treat Fido as an architecture by
2260 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
2262 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2264 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
2266 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2267 depending on allow_naked_reg.
2269 2007-01-04 Paul Brook <paul@codesourcery.com>
2271 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2273 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
2276 * config/tc-i386.c (register_prefix): New.
2277 (set_intel_syntax): Set set_intel_syntax to "" if register
2278 prefix isn't needed.
2279 (check_byte_reg): Use register_prefix for error message.
2280 (check_long_reg): Likewise.
2281 (check_qword_reg): Likewise.
2282 (check_word_reg): Likewise.
2284 2007-01-04 Julian Brown <julian@codesourcery.com>
2286 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2287 (do_neon_qshl_imm): Likewise.
2288 (do_neon_rshl): New function. Handle rounding variants of
2289 v{q}shl-by-register.
2290 (insns): Use do_neon_rshl for vrshl, vqrshl.
2292 2007-01-04 Paul Brook <paul@codesourcery.com>
2294 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2297 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2299 * config/tc-i386.c (swap_operands): Remove branches.
2301 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2303 * config/tc-i386.c: Update copyright year.
2304 * config/tc-i386.h: Likewise.
2306 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2308 * config/tc-i386.c (smallest_imm_type): Return unsigned int
2311 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
2313 * config/tc-i386.c: Convert to ISO C90 formatting
2314 * config/tc-i386.h: Likewise.
2316 2007-01-03 David Daney <ddaney@avtrex.com>
2318 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
2321 For older changes see ChangeLog-2006
2327 version-control: never