gas/ChangeLog

   1 2007-10-16  Nick Clifton  <nickc@redhat.com>
   2
   3         * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
   4         symbol type.
   5         * doc/as.texinfo (.type): Document the types accepted by the
   6         type pseudo op, including "common".
   7
   8 2007-10-15  Peter Bergner  <bergner@vnet.ibm.com>
   9
  10         * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
  11         according to major opcode number.
  12
  13 2007-10-15  Alan Modra  <amodra@bigpond.net.au>
  14
  15         * read.c (do_s_func): Check asprintf return status.
  16         * stabs.c (stabs_generate_asm_func): Likewise.
  17         (stabs_generate_asm_endfunc): Likewise.
  18
  19 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
  20
  21         * config/tc-i386.c (process_operands): Simplify implicit xmm0
  22         handling.
  23
  24 2007-10-12  H.J. Lu  <hongjiu.lu@intel.com>
  25
  26         * config/tc-i386.c (process_operands): Check the firstxmm0
  27         field in opcode_modifier for instruction with a implicit
  28         xmm0 as the first operand.
  29
  30 2007-10-12  Eric B. Weddington  <eweddington@cso.atmel.com>
  31
  32         * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
  33         AT90PWM3B.
  34         * doc/c-avr.texi: Document new devices.
  35
  36 2007-10-12  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
  37
  38         * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
  39         instruction range information.
  40
  41 2007-10-12  Daniel Jacobowitz  <dan@codesourcery.com>
  42
  43         * doc/as.texinfo (Object Attributes): New chapter.
  44         (Pseudo Ops): Document .gnu_attribute.
  45         (LNS directives): Correct .loc_mark_labels documentation.
  46
  47 2007-10-11  Nick Clifton  <nickc@redhat.com>
  48
  49         * config/obj-elf.c (obj_elf_section): When pushing a section, if
  50         there is a comma then the following argument must be a subsection
  51         number.
  52
  53 2007-10-11  H.J. Lu  <hongjiu.lu@intel.com>
  54
  55         * doc/c-i386.texi: Update which instruction's operands are
  56         swapped.
  57
  58 2007-10-11  Nick Clifton  <nickc@redhat.com>
  59
  60         PR gas/5161
  61         * config/tc-ia64.c: Allow for translations of error and warning
  62         messages.
  63         * po/gas.pot: Regenerate.
  64
  65         PR gas/5158
  66         * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
  67         message.
  68         * po/gas.pot: Regenerate.
  69
  70         PR gas/5155
  71         * config/tc-msp430.c: Fix spelling typos.
  72
  73 2007-10-11  Nick Clifton  <nickc@redhat.com>
  74
  75         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
  76
  77 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
  78
  79         * config/tc-mips.c (AT): Rename to...
  80         (ATREG): ... this.
  81         (AT): New definition.
  82         (mips_set_options): Rename "noat" to "at"; change the type.
  83         (mips_opts): Update accordingly.
  84         (append_insn): Likewise.
  85         (macro_build_ldst_constoffset): Likewise.
  86         (load_address): Likewise.
  87         (macro, macro2): Likewise.
  88         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  89         and ".set noat".
  90
  91 2007-10-08  Nick Clifton  <nickc@redhat.com>
  92
  93         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  94         of this pseudo-op and add a couple of examples.
  95
  96 2007-10-08  Nick Clifton  <nickc@redhat.com>
  97
  98         PR gas/5121 gas/5122 gas/5123
  99         * Makefile.am (CFILES): Add cgen.c
 100         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
 101         tc-tic4x.c and xtensa-relax.c.
 102         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
 103         tc-tic4x.h and xtensa-relax.h.
 104         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
 105         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
 106         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
 107         (CONFIG_ATOF_CFILES): New variable.
 108         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
 109         dependency upon TARG_ENV_HFILES.
 110         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
 111         cgen-desc.h when foo-desc.h does not exit.
 112         Run make dep-am.
 113         * Makefile.in: Regenerate.
 114         * doc/Makefile.in: Regenerate.
 115         * po/POTFILES.in: Regenerate.
 116         PR gas/5124 gas/5125
 117         * po/es.po: Regenerate.
 118         * po/fr.po: Regenerate.
 119         * po/gas.pot: Regenerate.
 120         * po/rw.po: Regenerate.
 121         * po/tr.po: Regenerate.
 122         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
 123         of error messages.
 124         PR gas/5126
 125         * config/obj-som.c: Likewise.
 126         PR gas/5129
 127         * config/tc-arc.c: Likewise.
 128         PR gas/5131 gas/5132
 129         * config/tc-arm.c: Likewise.
 130         PR gas/5137
 131         * config/tc-bfin.c: Likewise.
 132         PR gas/5143
 133         * config/tc-frv.c: Likewise.
 134         PR gas/5142
 135         * config/tc-dlx.c: Likewise.
 136
 137 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
 138
 139         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
 140         ATtiny48, AT90PWM216, AT90PWM316.
 141         * doc/c-avr.texi: Document new devices.
 142
 143 2007-10-08  Nick Clifton  <nickc@redhat.com>
 144
 145         PR gas/5133
 146         * config/tc-arm.c (md_apply_fix): Correct error message.
 147         PR gas/5134
 148         * config/tc-arm.c (md_apply_fix): Likewise.
 149         PR gas/5136
 150         * config/tc-bfin.c (md_apply_fix): Fix error message.
 151         PR gas/5135
 152         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
 153
 154 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
 155
 156         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
 157         immediate operands directly for instructions with 4 operands.
 158
 159 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
 160
 161         PR gas/5109
 162         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
 163         is ignored in Intel mode.
 164
 165 2007-10-04  Helge Deller  <deller@gmx.de>
 166
 167         * read.c (potable): Add string8, string16, string32 and string64.
 168         Add bit size for stringer function.
 169         (stringer_append_char): New.
 170         (stringer): Use stringer_append_char().
 171         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 172         * config/obj-elf.c (obj_elf_ident): Likewise.
 173         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 174         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 175         * config/tc-hppa.c (pa_stringer): Likewise.
 176         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 177         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 178         * config/tc-mcore.c (md_pseudo_table): Likewise.
 179         * config/tc-mips.c (mips_pseudo_table): Likewise.
 180         * config/tc-spu.c (md_pseudo_table): Likewise.
 181         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 182         * doc/as.texinfo (ABORT): Fix identing.
 183         (String): Document new string8, string16, string32, string64
 184         functions.
 185         * NEWS: Mention the new feature.
 186
 187 2007-10-03  Nick Clifton  <nickc@redhat.com>
 188
 189         PR gas/5078
 190         * config/tc-avr.c (avr_get_constant): Extend error message to
 191         mention that the constant must be positive.
 192
 193 2007-10-03  Nick Clifton  <nickc@redhat.com>
 194
 195         * config/tc-avr.c (avr_get_constant):
 196         PR gas/5089
 197         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 198         PR gas/5090
 199         (md_assemble): Fix spelling typo.
 200
 201 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 202
 203         PR 4303
 204         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 205
 206 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 207
 208         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 209         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 210
 211 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 212
 213         PR gas/5080
 214         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 215         (check_qword_reg): Also handle cvttsd2si.
 216
 217 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 218
 219         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 220         (last_movec_reg): Change to MBO.
 221         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 222         (m68k_ip): Use MBO instead of MBO.
 223         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 224
 225 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 226
 227         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 228         when considering IP-relative addressing.
 229
 230 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 231
 232         * config/tc-i386.h (md_register_arithmetic): Define.
 233         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 234         * doc/internals.texi: Document md_register_arithmetic.
 235         * expr.c (make_expr_symbol): Force O_register expressions into
 236         reg_section.
 237         (expr): Provide default for md_register_arithmetic. Don't resolve
 238         adding/subtracting constants to/from registers if
 239         md_register_arithmetic is zero.
 240
 241 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 242
 243         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 244         (cfi_finish): Add second empty instance.
 245
 246 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 247
 248         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 249         with simple call to parse_operand.
 250
 251 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 252
 253         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 254
 255 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 256
 257         * as.c (itbl_parse): Remove #define.
 258         (struct itbl_file_list): Move down and ...
 259         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 260         (show_usage): Conditionalize printing of --itbl option upon
 261         HAVE_ITBL_CPU.
 262         (parse_args): Conditionalize handling of -t/--itbl options upon
 263         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 264         't'.
 265
 266 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 267
 268         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 269         check opcode length.
 270
 271 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 272
 273         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 274         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 275         (md_relax_table): Add BRANCHBWPL entries.
 276         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 277         (md_assemble): Use FRAG_VAR_SIZE.
 278         (md_convert_frag_1): Add BRANCHBWPL cases.
 279         (md_estimate_size_before_relaz): Likewise.
 280
 281 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 282
 283         * config/tc-mips.c (s_align): Set max_alignment to 28.
 284
 285 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 286
 287         PR 658
 288         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 289         (set_allow_index_reg): New.
 290         (allow_index_reg): Likewise.
 291         (md_pseudo_table): Add "allow_index_reg" and
 292         "disallow_index_reg".
 293         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 294         fake index registers.
 295         (i386_scale): Updated.
 296         (i386_index_check): Support fake index registers.
 297         (parse_real_register): Return NULL on eiz/riz if fake index
 298         registers aren't allowed.
 299
 300 2007-09-19  Nick Clifton  <nickc@redhat.com>
 301
 302         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 303         fixups.
 304
 305 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 306
 307         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 308
 309 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 310
 311         * config/bfin-parse.y (asm_1): Slightly improve error messages
 312         for "reg += const;".
 313
 314 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 315
 316         PR gas/5026
 317         * read.c (emit_expr): Only use long long if required and available.
 318
 319 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 320
 321         * config/tc-i386.c (baseindex): Removed.
 322         (build_modrm_byte): Check reg_num for RIP register instead of
 323         reg_type.
 324         (i386_index_check): Likewise.
 325
 326 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 327
 328         PR gas/5035
 329         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 330         def_symbol_in_progress.
 331
 332 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 333
 334         PR gas/5026
 335         * read.c (emit_expr): Use unsigned long long values in warning
 336         message about truncated expressions.
 337
 338 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 339
 340         * config/tc-i386.c (intel_e04): Revert the last change.
 341
 342 2007-09-17  Nick Clifton  <nickc@redhat.com>
 343
 344         * po/es.po: Updated Spanish translation.
 345
 346 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 347
 348         PR gas/5034
 349         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 350         T_NIL.
 351
 352 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 353
 354         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 355         wrap.
 356
 357 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 358
 359         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 360         of (A || B) != 0.
 361
 362 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 363
 364         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 365
 366 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 367             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 368             Tony Linthicum  <tony.linthicum@amd.com>
 369
 370         * NEWS: Add SSE5 support to NEWS file.
 371
 372         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 373         and build_modrm_byte to communicate.
 374         (DREX_OC0): New SSE5 macro.
 375         (DREX_OC0_MASK): Ditto.
 376         (DREX_OC1): Ditto.
 377         (DREX_OC1_MASK): Ditto.
 378         (DREX_XMEM_X1_X2_X2): Ditto.
 379         (DREX_X1_XMEM_X2_X2): Ditto.
 380         (DREX_X1_XMEM_X2_X1: Ditto.
 381         (DREX_X1_X2_XMEM_X1: Ditto.
 382         (DREX_XMEM_X1_X2): Ditto.
 383         (DREX_X1_XMEM_X2): Ditto.
 384         (drex_byte): New structure to describe the DREX byte.
 385
 386         * config/tc-i386.c (process_drex): New function to handle SSE5
 387         DREX bits.
 388         (build_modrm_byte): Use the information cached away in
 389         process_drex in the case of DREX instructions.
 390         (i386_insn): Add drex field.
 391         (pi): Add debugging of drex field.
 392         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 393         immediate byte.  Move REX field to DREX if this is a DREX
 394         instruction.
 395         (process_operands): Add SSE5 support.
 396         (build_modrm_byte): Ditto.
 397         (output_insn): Ditto.
 398         (cpu_arch): Ditto.
 399         (i386_align_code): Ditto.
 400
 401 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 402
 403         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 404         after generic operand swapping, and swap only the immediate operands.
 405
 406 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 407
 408         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 409         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 410
 411 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 412
 413         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 414         byte opcode.
 415
 416 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 417
 418         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 419         (cpu_flags_check_cpu64): This. Inline.
 420         (uints_all_zero): New.
 421         (uints_set): Likewise
 422         (uints_equal): Likewise
 423         (UINTS_ALL_ZERO): Likewise
 424         (UINTS_SET): Likewise
 425         (UINTS_CLEAR): Likewise
 426         (UINTS_EQUAL): Likewise
 427         (cpu_flags_and): Likewise.
 428         (cpu_flags_or): Likewise.
 429         (operand_type_and): Likewise.
 430         (operand_type_or): Likewise.
 431         (operand_type_xor): Likewise.
 432         (cpu_flags_not): Inline and use switch instead of loop.
 433         (cpu_flags_match): Updated.
 434         (operand_type_match): Likewise.
 435         (smallest_imm_type): Likewise.
 436         (set_cpu_arch): Likewise.
 437         (pt): Likewise.
 438         (md_assemble): Likewise.
 439         (parse_insn): Likewise.
 440         (optimize_imm): Likewise.
 441         (match_template): Likewise.
 442         (process_suffix): Likewise.
 443         (update_imm): Likewise.
 444         (finalize_imm): Likewise.
 445         (process_operands): Likewise.
 446         (build_modrm_byte): Likewise.
 447         (i386_immediate): Likewise.
 448         (i386_displacement): Likewise.
 449         (i386_index_check): Likewise.
 450         (i386_operand): Likewise.
 451         (i386_target_format): Likewise.
 452         (intel_e11): Likewise.
 453         (operand_type): Remove implicitregister.
 454         (operand_type_check): Updated. Inline.
 455         (cpu_flags_all_zero): Removed.
 456         (operand_type_all_zero): Likewise.
 457         (i386_array_biop): Likewise.
 458         (cpu_flags_biop): Likewise.
 459         (operand_type_biop): Likewise.
 460
 461 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 462
 463         * Makefile.am: Run "make dep-am".
 464         * Makefile.in: Regenerate.
 465
 466 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 467
 468         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 469         * configure: Regenerated.
 470         * config.in: Likewise.
 471
 472         * config/tc-i386.c: Include "opcodes/i386-init.h".
 473         (_i386_insn): Use i386_operand_type for types.
 474         (cpu_arch_flags): Updated to new types with bitfield.
 475         (cpu_arch_tune_flags): Likewise.
 476         (cpu_arch_isa_flags): Likewise.
 477         (cpu_arch): Likewise.
 478         (i386_align_code): Likewise.
 479         (set_code_flag): Likewise.
 480         (set_16bit_gcc_code_flag): Likewise.
 481         (set_cpu_arch): Likewise.
 482         (md_assemble): Likewise.
 483         (parse_insn): Likewise.
 484         (process_operands): Likewise.
 485         (output_branch): Likewise.
 486         (output_jump): Likewise.
 487         (parse_real_register): Likewise.
 488         (mode_from_disp_size): Likewise.
 489         (smallest_imm_type): Likewise.
 490         (pi): Likewise.
 491         (type_names): Likewise.
 492         (pt): Likewise.
 493         (pte): Likewise.
 494         (swap_2_operands): Likewise.
 495         (optimize_imm): Likewise.
 496         (optimize_disp): Likewise.
 497         (match_template): Likewise.
 498         (check_string): Likewise.
 499         (process_suffix): Likewise.
 500         (check_byte_reg): Likewise.
 501         (check_long_reg): Likewise.
 502         (check_qword_reg): Likewise.
 503         (check_word_reg): Likewise.
 504         (finalize_imm): Likewise.
 505         (build_modrm_byte): Likewise.
 506         (output_insn): Likewise.
 507         (disp_size): Likewise.
 508         (imm_size): Likewise.
 509         (output_disp): Likewise.
 510         (output_imm): Likewise.
 511         (gotrel): Likewise.
 512         (i386_immediate): Likewise.
 513         (i386_displacement): Likewise.
 514         (i386_index_check): Likewise.
 515         (i386_operand): Likewise.
 516         (parse_real_register): Likewise.
 517         (i386_intel_operand): Likewise.
 518         (intel_e09): Likewise.
 519         (intel_bracket_expr): Likewise.
 520         (intel_e11): Likewise.
 521         (cpu_arch_flags_not): New.
 522         (cpu_flags_check_x64): Likewise.
 523         (cpu_flags_all_zero): Likewise.
 524         (cpu_flags_not): Likewise.
 525         (i386_cpu_flags_biop): Likewise.
 526         (cpu_flags_biop): Likewise.
 527         (cpu_flags_match); Likewise.
 528         (acc32): New.
 529         (acc64): Likewise.
 530         (control): Likewise.
 531         (reg16_inoutportreg): Likewise.
 532         (disp16): Likewise.
 533         (disp32): Likewise.
 534         (disp32s): Likewise.
 535         (disp16_32): Likewise.
 536         (anydisp): Likewise.
 537         (baseindex): Likewise.
 538         (regxmm): Likewise.
 539         (imm8): Likewise.
 540         (imm8s): Likewise.
 541         (imm16): Likewise.
 542         (imm32): Likewise.
 543         (imm32s): Likewise.
 544         (imm64): Likewise.
 545         (imm16_32): Likewise.
 546         (imm16_32s): Likewise.
 547         (imm16_32_32s): Likewise.
 548         (operand_type): Likewise.
 549         (operand_type_check): Likewise.
 550         (operand_type_match): Likewise.
 551         (operand_type_register_match): Likewise.
 552         (update_imm): Likewise.
 553         (set_code_flag): Also update cpu_arch_flags_not.
 554         (set_16bit_gcc_code_flag): Likewise.
 555         (md_begin): Likewise.
 556         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 557         Use cpu_flags_match to match instructions.
 558         (i386_target_format): Update cpu_arch_isa_flags and
 559         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 560         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 561         (match_template): Don't initialize overlap0, overlap1,
 562         overlap2, overlap3 and operand_types.
 563         (process_suffix): Handle crc32 with 64bit register.
 564         (MATCH): Removed.
 565         (CONSISTENT_REGISTER_MATCH): Likewise.
 566
 567         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 568         type.
 569
 570 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 571
 572         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 573         vmrun and vmsave in SVME.
 574         (process_suffix): Likewise.
 575
 576 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 577
 578         * config/tc-i386.c (i386_index_check): Don't use RegRex
 579         on the reg_type field.
 580         (parse_real_register): Use `||' instead of `|'.
 581
 582 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 583
 584         * config/tc-i386.c (process_operands): Remove segment override
 585         check on SVME instructions.
 586         (i386_index_check): Remove memory operand check on SVME
 587         instructions.
 588
 589 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 590
 591         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 592         (md_assemble): Update init of insn.  Use insn.reloc instead of
 593         calculating from flag.
 594         (get_imm): Set reloc rather than flag.
 595         (calcop): Formatting.
 596
 597 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 598
 599         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 600
 601 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 602
 603         * doc/c-arc.texi: Fix typo.
 604
 605 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 606
 607         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 608         Intel mode.
 609
 610 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 611
 612         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 613         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 614         (mcf5407_ctrl): New.
 615         (m68k_cpus): Adjust 5407 entry.
 616
 617 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 618
 619         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 620         (m68k_cpus): Define 51QE cpu.
 621
 622 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 623             Joseph Myers  <joseph@codesourcery.com>
 624
 625         * as.c (main): Flush stderr before printing listings to ensure
 626         consistent output order across platforms.
 627
 628 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 629
 630         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 631
 632 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 633             Paul Brook  <paul@codesourcery.com>
 634
 635         * remap.c: New.
 636         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 637         * as.c (show_usage): Document --debug-prefix-map option.
 638         (parse_args): Handle --debug-prefix-map.
 639         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 640         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 641         * Makefile.am (GAS_CFILES): Add remap.c
 642         (GENERIC_OBJS): Add remap.o.
 643         Regenerate dependencies.
 644         * Makefile.in: Regenerate.
 645         * doc/as.texinfo (--debug-prefix-map): Document.
 646
 647 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 648
 649         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 650         before printing them.
 651
 652 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 653             Alan Modra  <amodra@bigpond.net.au>
 654
 655         * config/tc-i386.c (lex_got): Don't scan past a comma.
 656
 657 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 658
 659         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 660         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 661         (md_show_usage): Document -m750cl.
 662         (md_assemble): Handle two delimiters in succession (eg. `),').
 663         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 664         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 665         * testsuite/gas/ppc/ppc750ps.s: New file.
 666         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 667
 668 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 669
 670         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 671
 672 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 673
 674         PR gas/4079
 675         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 676         expressions.
 677         (i386_immediate): Detect and complain about more cases of
 678         invalid immediate expressions.  Return failure rather than
 679         converting them to zero.
 680         (i386_displacement): Likewise.
 681
 682 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 683
 684         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 685
 686 2007-08-14  Andreas Schwab  <schwab@suse.de>
 687
 688         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 689         unrepresentable.
 690
 691 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 692
 693         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 694         $(top_srcdir)/../../bfd/doc.
 695         * doc/Makefile.in: Regenerate.
 696
 697 2007-08-10  Nick Clifton  <nickc@redhat.com>
 698
 699         * NEWS: Add a marker for the 2.18 features.
 700
 701 2007-08-09  Paul Brook  <paul@codesourcery.com>
 702
 703         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 704
 705 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 706
 707         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 708
 709 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 710
 711         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 712         DWORD memory to Reg64 in Intel synax.
 713         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 714         Reg32 in Intel syntax.
 715
 716 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 717
 718         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 719         (xg_expand_assembly_insn): Check for invalid extui operands.
 720         (md_begin): Initialize xtensa_extui_opcode.
 721
 722 2007-07-24  Nick Clifton  <nickc@redhat.com>
 723
 724         * config/tc-mep.h (skip_whitespace): Remove definition.
 725
 726 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 727
 728         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 729         (f32_15): Removed.
 730         (jump_31): New.
 731         (f32_patt): Remove f32_15.
 732         (f16_patt): Likewise.
 733         (i386_align_code): Updated to alt_long_patt for 64bit by
 734         default.
 735
 736         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 737
 738 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 739
 740         * config/tc-i386.c (i386_align_code): Enable alignment up to
 741         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 742         for K8.
 743
 744         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 745
 746 2007-07-20  Nick Clifton  <nickc@redhat.com>
 747
 748         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 749         pushed back newline at the end of an unterminated quoted string.
 750
 751 2007-07-14  Nick Clifton  <nickc@redhat.com>
 752
 753         * config/tc-arm.c (create_register_alias): Return a boolean rather
 754         than an integer.
 755         Check the return value of insert_reg_alias and do not continue to
 756         create aliases once an insertion has failed.
 757         (s_unreq): Delete the all-upper-case and all-lower-case
 758         alternatives as well.
 759
 760 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 761
 762         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 763         * write.c: Likewise.
 764
 765 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 766
 767         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 768         HAVE_64BIT_SYMBOLS.
 769
 770 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 771
 772         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 773         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 774         Deprecate *x and *fx.
 775         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 776         *x and *fx.
 777
 778 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 779
 780         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 781         (i386_target_format): This
 782         (TARGET_FORMAT): Use i386_target_format.
 783
 784         * config/tc-i386.c (x86_64_target_format): Removed.
 785         (i386_target_format): Handle PE formats.
 786
 787 2007-07-04  Nick Clifton  <nickc@redhat.com>
 788
 789         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 790         to get the right length of printed value.
 791
 792 2007-07-03  Nick Clifton  <nickc@redhat.com>
 793
 794         * COPYING: Replace with GPLv3 text.
 795         * app.c: Update copyright notice to refer to GPLv3.
 796         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 797         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 798         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 799         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 800         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 801         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 802         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 803         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 804         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 805         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 806         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 807         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 808         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 809         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 810         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 811         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 812         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 813         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 814         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 815         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 816         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 817         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 818         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 819         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 820         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 821         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 822         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 823         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 824         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 825         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 826         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 827         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 828         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 829         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 830         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 831         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 832         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 833         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 834         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 835         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 836         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 837         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 838         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 839         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 840         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 841         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 842         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 843         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 844         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 845         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 846         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 847         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 848         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 849         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 850         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 851         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 852         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 853         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 854         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 855         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 856
 857         * flonum-mult.c: Likewise, and also correct typo referring to
 858         non-existant GNU Assembler General Public License.
 859         * config/tc-m68851.h: Likewise.
 860         * NEWS: Mention the new license.  Also note where the 2.17 release
 861         happened.
 862         * config/e-crisaout.c: Add copyright header.
 863         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 864         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 865         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 866         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 867         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 868         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 869         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 870         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 871         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 872         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 873         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 874         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 875         config/te-wince-pe.h: Likewise.
 876
 877 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 878
 879         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 880         (install_operand): Add E encoding.
 881         (md_begin): Check and skip initial '.' arg character.
 882         (get_num): Add 0..511 case.
 883
 884 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 885
 886         PR 4713
 887         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 888         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 889
 890 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 891
 892         PR 4722
 893         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 894         after memcpy.
 895
 896 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 897
 898         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 899         s_dtprel_internal): New.
 900         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 901         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 902         BFD_RELOC_MIPS_TLS_DTPREL64.
 903
 904 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 905
 906         * Makefile.am: Run "make dep-am".
 907         * Makefile.in: Regenerate.
 908         * aclocal.m4: Regenerate.
 909         * config.in: Regenerate.
 910         * doc/Makefile.in: Regenerate.
 911         * po/POTFILES.in: Regenerate.
 912         * po/gas.pot: Regenerate.
 913
 914 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 915
 916         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 917         coff section flag values to bfd section flag.
 918
 919 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 920
 921         * aclocal.m4: Regenerated.
 922         * doc/Makefile.in: Likewise.
 923         * Makefile.in: Likewise.
 924
 925 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 926
 927         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 928
 929 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 930
 931         * as.c (create_obj_attrs_section): New.
 932         (main): Call create_obj_attrs_section for ELF.
 933         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 934         skip_past_comma, s_vendor_attribute): New.
 935         (potable): Add gnu_attribute for ELF.
 936         * read.h (s_vendor_attribute): Declare.
 937         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 938         round s_vendor_attribute.
 939         (aeabi_set_public_attributes): Update for new attributes
 940         interfaces.
 941         (arm_md_end): Remove attributes contents setting now done
 942         generically.
 943
 944 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 945
 946         * Makefile.am: Add CR16 related entry.
 947         * Makefile.in: Regenerate.
 948         * config/tc-cr16.h: New file
 949         * config/tc-cr16.c: New file
 950         * doc/c-cr16.texi: New file for cr16
 951         * doc/all.texi: Entry for cr16
 952         * doc/Makefile.am: Added c-cr16.texi
 953         * doc/Makefile.in: Regenerate
 954         * doc/as.texinfo: Entry for CR16 target
 955         * NEWS: Announce the support for the new target.
 956
 957 2007-06-26  Paul Brook  <paul@codesourcery.com>
 958
 959         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 960         for OP_RVC.
 961         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 962
 963 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 964
 965         * config/tc-i386.c (process_operands): Replace regKludge
 966         with RegKludge.
 967
 968 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 969
 970         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 971         * config/tc-mips.c (append_insn): Record which symbols have
 972         R_MIPS16_26 relocations against them.
 973         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 974
 975 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 976
 977         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 978         (frag_format_size): Handle RELAX_IMMED_STEP3.
 979         (xtensa_relax_frag, md_convert_frag): Likewise.
 980         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 981         (RELAX_IMMED_MAXSTEPS): Adjust.
 982         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 983         wide branches to branch-over-jumps.
 984         (build_transition): Handle wide branches in transition patterns.
 985
 986 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 987
 988         * config/tc-i386.c (disp_size): New.
 989         (imm_size): Likewise.
 990         (output_disp): Use disp_size and imm_size.
 991         (output_imm): Use imm_size.
 992
 993 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 994
 995         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 996         use of literal_frag field.
 997         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 998         in the literal_frag field.
 999         (xtensa_move_literals): Use it here instead of searching.  Update
1000         literal_frag field with new value.
1001
1002 2007-06-14  Paul Brook  <paul@codesourcery.com>
1003
1004         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
1005         narrow shift by immediate.
1006
1007 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
1008
1009         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
1010
1011         * acinclude.m4: Don't include m4 files.
1012         (BFD_BINARY_FOPEN): Removed.
1013         Remove libtool kludge.
1014
1015         * Makefile.in: Regenerated.
1016         * doc/Makefile.in: Likewise.
1017         * aclocal.m4: Likewise.
1018         * configure: Likewise.
1019
1020 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
1021             Bob Wilson  <bob.wilson@acm.org>
1022
1023         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
1024         (XTENSA_PROP_NO_TRANSFORM): ...this.
1025         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
1026         (xtensa_mark_frags_for_org): New.
1027         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
1028         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
1029         (get_frag_property_flags): Adjust reference to is_no_transform flag.
1030         (xtensa_frag_flags_combinable): Likewise.
1031         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
1032         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
1033
1034 2007-06-06  Paul Brook  <paul@codesourcery.com>
1035
1036         * config/tc-arm.c (s_align): Pad code sections appropriately.
1037
1038 2007-06-05  Paul Brook  <paul@codesourcery.com>
1039
1040         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
1041
1042 2007-06-05  Nick Clifton  <nickc@redhat.com>
1043
1044         PR gas/4587
1045         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
1046
1047 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
1048
1049         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
1050         number@ppu.
1051         (tc_gen_reloc): Abort if neither addsy or subsy is set.
1052         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
1053         * config/tc-spu.h (md_operand): Handle @ppu without sym.
1054
1055 2007-05-31  Paul Brook  <paul@codesourcery.com>
1056
1057         * config/tc-arm.c (insns): Allow strex on M profile cores.
1058
1059 2007-05-29  David S. Miller  <davem@davemloft.net>
1060             Jakub Jelinek  <jakub@redhat.com>
1061
1062         PR gas/4558
1063         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
1064         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
1065
1066 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1067
1068         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
1069
1070 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1071
1072         * config/tc-ppc.c: Convert to ISO C.
1073         * config/tc-ppc.c: Likewise.
1074
1075 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1076
1077         * write.h (EXEC_MACHINE_TYPE): Delete.
1078         (string_byte_count, section_alignment): Delete.
1079
1080 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1081
1082         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1083
1084 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1085
1086         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1087         top 32 bits of 64 bit value if so doing results in passing
1088         range check.  Rewrite sign extension fudges similarly.  Enable
1089         fudges for powerpc64 too.  Report user value if range check
1090         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1091         range rather than value, also to report user value on failure.
1092
1093 2007-03-25  Paul Brook  <paul@codesourcery.com>
1094
1095         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1096         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1097         (do_t_mov_cmp): Correctly encode movs pc, lr.
1098
1099 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1100
1101         * Makefile.in: Regnerate.
1102         * configure: Regenerate.
1103         * aclocal.m4: Regenerate.
1104         * doc/Makefile.in: Regenerate.
1105
1106 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1107
1108         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1109         and index entries about automatic alignment of ENTRY instructions.
1110
1111 2007-05-22  Nick Clifton  <nickc@redhat.com>
1112
1113         * doc/as.texinfo: Use @copying around the copyright notice.
1114
1115 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1116
1117         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1118         containing a comma.
1119
1120 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1121
1122         PR gas/4517
1123         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1124         * doc/as.texinfo: Document new directives: .cfi_restore,
1125         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1126         .cfi_remember_state and .cfi_restore_state.
1127
1128 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1129
1130         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1131         fixups in error message.
1132         (md_conver_frag_1): Propagate the fix source location and use
1133         as_bad_where rather than fatal, for better error messages.
1134
1135 2007-05-16  Paul Brook  <paul@codesourcery.com>
1136
1137         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1138
1139 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1140
1141         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1142
1143 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1144
1145         PR gas/3041
1146         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1147         addend is stored for relocs against weak symbols.
1148         (md_apply_fix): So not loose track of addend for relocs against
1149         weak symbols.
1150
1151 2007-05-14  Thiemo Seufer  <ths@mips.com>
1152
1153         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1154
1155 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1156
1157         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1158         addri, addri.c, subi, and subi.c when immediate number is hex.
1159         (score_insns): Remove subis and subis.c.
1160         (do_sub_rdi16): Delete.
1161
1162 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1163
1164         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1165         spu_cons for word.
1166         (md_assemble): Tidy use of insn.flag.
1167         (get_imm): Likewise.  Handle uppercase input too.
1168         (spu_cons): New function.
1169         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1170         (TC_FORCE_RELOCATION): Don't resolve them either.
1171
1172 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1173
1174         * config/tc-arm.c (md_apply_fix): Generate more accurate
1175         diagnostic when 8-bit immediate range is exceeded for
1176         BFD_RELOC_ARM_OFFSET_IMM8.
1177
1178 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1179
1180         PR gas/4460
1181         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1182         a space if we already have a space.
1183
1184 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1185
1186         * config/tc-i386.c (match_template): Don't explicitly check
1187         suffix for crc32 in Intel mode.
1188         (process_suffix): Issue an error for crc32 if the operand size
1189         is ambiguous.
1190
1191 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1192             Nick Clifton  <nickc@redhat.com>
1193
1194         PR gas/3041
1195         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1196         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1197         (md_apply_fix): Put zero values into the frags referencing weak
1198         symbols.
1199
1200 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1201
1202         PR 4448
1203         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1204         PPC_OPERAND_PLUS1.
1205
1206 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1207
1208         * config/tc-i386.c (match_template): Check suffix for crc32 in
1209         Intel mdoe.
1210         (process_suffix): Default the suffix of 8bit crc32 to
1211         BYTE_MNEM_SUFFIX.
1212         (check_byte_reg): Skip check for 8bit crc32.
1213
1214 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1215
1216         * config/tc-i386.c (md_assemble): Use register_prefix in
1217         error/warning message.
1218         (check_byte_reg): Likewise.
1219         (check_long_reg): Likewise.
1220         (check_qword_reg): Likewise.
1221         (check_word_reg): Likewise.
1222         (process_operands): Likewise.
1223
1224 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1225
1226         PR 4436
1227         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1228         min > max.
1229
1230 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1231
1232         * config/tc-mips.c: Fix comment.
1233
1234 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1235
1236         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1237         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1238         * doc/c-avr.texi: Document new devices.
1239
1240 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1241
1242         * Makefile.am: Run "make dep-am".
1243         * Makefile.in: Regenerate.
1244
1245 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1246
1247         * config/tc-m68k.c (mcf54455_ctrl): New.
1248         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1249         (m68k_archs): Add isac.
1250         (m68k_cpus): Add 54455 family.
1251         (m68k_ip): Split Bg into Bb, Bs, Bg.
1252         (m68k_elf_final_processing): Add ISA_C.
1253         * doc/c-m68k.texi (M680x0 Options): Add isac.
1254
1255 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1256
1257         * read.c (read_a_source_file): Skip multiple spaces to
1258         cover hack in mmix md_start_line_hook which overwrites a
1259         colon with a space.  Delete sermon and needless assertion.
1260
1261 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1262
1263         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1264         (md_atof): Make number_of_chars unsigned.  Revert last change.
1265         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1266         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1267         * config/tc-sh.h (md_optimize_expr): Likewise.
1268         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1269         assertion.
1270         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1271
1272 2007-04-21  Nick Clifton  <nickc@redhat.com>
1273
1274         * config/atof-vax.c (md_atof): Fix comparison inside know().
1275
1276         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1277
1278 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1279
1280         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1281         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1282         Don't skip over NUL char.
1283         (pseudo_set): Set X_op for registers to O_register.
1284         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1285         (resolve_symbol_value): Resolve O_register symbols.
1286         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1287         Instead find st(0) by hash lookup.
1288         * config/tc-ppc.c (ppc_macro): Warning fix.
1289
1290         * as.h (ENABLE_CHECKING): Default define to 0.
1291         (know): Assert if ENABLE_CHECKING.
1292         (struct relax_type): Remove superfluous declaration.
1293         * configure.in (--enable-checking): New.
1294         * configure: Regenerate.
1295         * config.in: Regenerate.
1296         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1297         Check for duplicate powerpc_operands entries.
1298
1299 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1300
1301         * config/tc-m68k.c (mcf5253_ctrl): New.
1302         (mcf52223_ctrl): New.
1303         (m68k_cpus): Add 5253, 52221, 52223.
1304
1305         * config/m68k-parse.h (RAMBAR_ALT): New.
1306         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1307         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1308         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1309         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1310         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1311         RAMBAR1.
1312         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1313         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1314         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1315         to control register mapping.
1316
1317 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1318
1319         * messages.c (as_internal_value_out_of_range): Fix typo in
1320         error message.  Return after printing domain error.
1321         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1322         in max when shifting right.
1323
1324 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1325
1326         * messages.c (as_internal_value_out_of_range): Extend to report
1327         errors for values with invalid low bits set.
1328         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1329         fields.  Check that operands and opcode fields are disjoint.
1330         (ppc_insert_operand): Check operands using mask rather than bit
1331         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1332         insertion code.
1333         (md_apply_fix): Adjust for struct powerpc_operand change.
1334
1335 2007-04-19  Paul Brook  <paul@codesourcery.com>
1336
1337         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1338         Thumb-1.  Add sanity check for bogus relaxations.
1339
1340 2007-04-19  Paul Brook  <paul@codesourcery.com>
1341
1342         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1343
1344 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1345
1346         * Makefile.am: Run "make dep-am".
1347         * Makefile.in: Regenerate.
1348
1349 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1350
1351         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1352
1353 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1354
1355         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1356
1357 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1358
1359         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1360         (match_template): Handle operand size for crc32 in SSE4.2.
1361         (process_suffix): Handle operand type for crc32 in SSE4.2.
1362         (output_insn): Support SSE4.2.
1363
1364 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1365
1366         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1367         (process_operands): Adjust implicit operand for blendvpd,
1368         blendvps and pblendvb in SSE4.1.
1369         (output_insn): Support SSE4.1.
1370
1371 2007-04-18  Paul Brook  <paul@codesourcery.com>
1372
1373         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1374
1375 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1376
1377         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1378         of as_warn_where for misaligned data.
1379
1380 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1381
1382         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1383         rs_fill frags.
1384
1385 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1386
1387         * Makefile.am: Add ACLOCAL_AMFLAGS.
1388         * Makefile.in: Regenerate.
1389
1390 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1391
1392         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1393         (sh_optimize_expr): Likewise.
1394         * config/tc-sh.h (md_optimize_expr): Define.
1395         (sh_optimize_expr): Prototype.
1396
1397 2007-04-06  Matt Thomas  <matt@netbsd.org>
1398
1399         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1400         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1401         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1402
1403 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1404
1405         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1406
1407 2007-04-04  Paul Brook  <paul@codesourcery.com>
1408
1409         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1410         (insns): Use I15 for vext.
1411
1412 2007-04-04  Paul Brook  <paul@codesourcery.com>
1413
1414         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1415
1416 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1417
1418         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1419         outputting_stabs_line_debug.
1420
1421 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1422
1423         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1424         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1425         devices.
1426         * doc/c-avr.texi: Document new devices.
1427
1428 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1429
1430         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1431         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1432         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1433
1434 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1435             Bob Wilson  <bob.wilson@acm.org>
1436
1437         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1438         Do not check is_loop_target flag.
1439         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1440         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1441         xtensa_move_labels for alignment of loop opcodes.
1442
1443 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1444
1445         * config/tc-i386.c (process_suffix): Reindent a bit.
1446
1447 2007-03-30  Paul Brook  <paul@codesourcery.com>
1448
1449         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1450         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1451         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1452
1453 2007-03-29  DJ Delorie  <dj@redhat.com>
1454
1455         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1456         (md_relax_table): Add entries for ADJNZ macros.
1457         (M32C_Macros): Add ADJNZ macros.
1458         (subtype_mappings): Add entries for ADJNZ macros.
1459         (insn_to_subtype): Check for adjnz and sbjnz insns.
1460         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1461         (md_convert_frag): Convert adjnz and sbjnz.
1462
1463 2007-03-29  Nick Clifton  <nickc@redhat.com>
1464
1465         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1466         initialization.
1467         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1468         using ITBL_NUMBER_OF_PROCESSORS.
1469         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1470
1471 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1472
1473         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1474         register operands, encode destination in i.rm.regmem if its
1475         RegMem bit is set.
1476
1477 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1478             Phil Edwards  <phil@codesourcery.com>
1479
1480         * doc/as.texinfo: Put the contents after the title page rather
1481         than at the end of the document.
1482
1483 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1484
1485         * NEWS: Mention ".reloc".
1486
1487 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1488
1489         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1490         in FLIX instructions.
1491
1492 2007-03-26  Julian Brown  <julian@codesourcery.com>
1493
1494         * config/tc-arm.c (arm_it): Add immisfloat field.
1495         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1496         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1497         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1498         float.
1499         (neon_cmode_for_move_imm): Reject non-float immediates for float
1500         operands.
1501         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1502
1503 2007-03-26  Julian Brown  <julian@codesourcery.com>
1504
1505         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1506
1507 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1508
1509         * doc/as.texinfo (Reloc): Document.
1510         * read.c (potable): Add "reloc".
1511         (s_reloc): New function.
1512         * write.c (reloc_list): New global var.
1513         (resolve_reloc_expr_symbols): New function.
1514         (write_object_file): Call it.
1515         (write_relocs): Process reloc_list.
1516         * write.h (struct reloc_list): New.
1517         (reloc_list): Declare.
1518
1519 2007-03-24  Paul Brook  <paul@codesourcery.com>
1520
1521         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1522
1523 2007-03-24  Paul Brook  <paul@codesourcery.com>
1524         Mark Shinwell  <shinwell@codesourcery.com>
1525
1526         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1527         (parse_operands): Don't expect comma if first operand missing.
1528         Handle OP_oRRw.
1529         (do_srs): Encode register number, checking it is r13.  Update comment.
1530         (insns): Update SRS entries to take a register.
1531
1532 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1533
1534         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1535
1536 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1537
1538         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1539         attempt to jump to the next instruction into NOPs.
1540
1541 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1542
1543         * config/tc-spu.c: Don't include opcode/spu.h.
1544         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1545         (md_apply_fix): Adjust.
1546         * config/tc-spu.h: Include opcode/spu.h.
1547         (struct tc_fix_info): New.
1548         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1549         (TC_FORCE_RELOCATION): Define.
1550
1551 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1552
1553         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1554
1555 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1556
1557         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1558         xchg for xchg %rax,%rax.
1559
1560 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1561
1562         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1563         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1564
1565 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1566
1567         PR binutils/4218
1568         * config/tc-i386.c (match_template): Properly handle 64bit mode
1569         "xchg %eax, %eax".
1570
1571 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1572
1573         PR gas/4124
1574         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1575
1576 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1577
1578         * Makefile.am: Run dep-am.
1579         * Makefile.in: Regenerated.
1580
1581         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1582
1583         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1584         (NOP_OPCODE): Removed.
1585         (template): Likewise.
1586
1587 2007-03-21  Andreas Schwab  <schwab@suse.de>
1588
1589         * config/tc-i386.h (NOP_OPCODE): Restore.
1590
1591 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1592
1593         * config/tc-arm.c (do_mul): Don't warn about overlapping
1594         Rd and Rm operands when assembling for v6 or above.
1595         Correctly capitalize register names in the messages.
1596         (do_mlas): Likewise.  Delete spurious blank line.
1597
1598 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1599
1600         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1601
1602 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1603
1604         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1605         i386_regtab.
1606         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1607         on i386_regtab.
1608
1609 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1610
1611         PR gas/4184
1612         * app.c (do_scrub_chars): PUT after setting states.
1613
1614 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1615
1616         * Makefile.am: Run "make dep-am".
1617         * Makefile.in: Regenerated.
1618
1619         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1620         "opcode/i386.h".
1621         (md_begin): Check reg_name != NULL for the last entry in
1622         i386_regtab.
1623
1624         * config/tc-i386.h: Move many entries to opcode/i386.h and
1625         opcodes/i386-opc.h.
1626
1627         * configure.in (need_opcodes): Set true for i386.
1628         * configure: Regenerated.
1629
1630 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1631
1632         * Makefile.am (REPORT_BUGS_TO): Removed.
1633         (INCLUDES): Remove -DREPORT_BUGS_TO.
1634         * Makefile.in: Regenerated.
1635
1636         * configure.in (--with-bugurl): Removed.
1637         * configure: Regenerated.
1638
1639         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1640         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1641         (TEXI2DVI): Likewise.
1642         (gasver.texi): Removed.
1643         (MOSTLYCLEANFILES): Remove gasver.texi.
1644         (as.1): Don't depend on gasver.texi.
1645         * doc/Makefile.in: Regenerated.
1646
1647         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1648
1649 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1650
1651         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1652         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1653         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1654         * gas/symbols.c (copy_symbol_attributes): Use
1655         TC_COPY_SYMBOL_ATTRIBUTES.
1656
1657 2007-03-14  Paul Brook  <paul@codesourcery.com>
1658
1659         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1660
1661 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1662
1663         PR 4029
1664         * write.c (relax_segment): Insert extra alignment padding
1665         to break infinite relax loop when given impossible
1666         gcc_except_table assembly.
1667
1668 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1669
1670         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1671         on i.tm.base_opcode.
1672         (match_template): Likewise.
1673         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1674
1675         * config/tc-i386.h (Opcode_D): New.
1676         (Opcode_FloatR): Likewise.
1677         (Opcode_FloatD): Likewise.
1678         (D): Redefined.
1679         (W): Likewise.
1680         (FloatMF): Likewise.
1681         (FloatR): Likewise.
1682         (FloatD): Likewise.
1683
1684 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1685
1686         * app.c (do_scrub_chars): Recognize comments after # line "file".
1687         * read.c (get_linefile_number): New.
1688         (s_app_line): Accept ill-formed .linefile lines as comments.
1689
1690 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1691
1692         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1693
1694 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1695
1696         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1697         * as.h (new_logical_line_flags): New.
1698         * input-scrub.c (new_logical_line): Turned into wrapper for...
1699         (new_logical_line_flags): this.  Handle flags.
1700         * read.c (potable): Add linefile.  Adjust appline argument.
1701         (s_app_file): Fake .appfiles no more.
1702         (s_app_line): For .linefile, accept file name and flags.
1703
1704 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1705
1706         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1707
1708 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1709
1710         * Makefile.am: Run "make dep-am".
1711         * Makefile.in: Regenerate.
1712         * po/POTFILES.in: Regenerate.
1713
1714 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1715
1716         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1717         bug-reporting URL.
1718         * doc/Makefile.am (gasver.texi): Define BUGURL.
1719         * doc/as.texinfo: Use BUGURL.
1720         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1721
1722 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1723
1724         * config/tc-s390.c (md_parse_option): z9-ec option added.
1725
1726 2007-03-02  Paul Brook  <paul@codesourcery.com>
1727
1728         * config/tc-arm.c (relax_immediate): Always return positive values.
1729         (relaxed_symbol_addr): New function.
1730         (relax_adr, relax_branch): Use it.
1731         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1732
1733 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1734
1735         * as.c (parse_args): Update copyright date.
1736
1737 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1738
1739         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1740
1741 2007-02-28  Nick Clifton  <nickc@redhat.com>
1742
1743         PR gas/3797
1744         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1745         just return -1 whenever a problem is encountered.
1746         (md_assemble): If do_assemble returns -1 generate a non-fatal
1747         error message and return.
1748
1749         PR gas/2623
1750         * config/tc-msp430.c (line_separator_char): Change to '{'.
1751
1752 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1753
1754         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1755         (build_jump_insn): Likewise.
1756         (build_insn): Likewise.
1757         (s_m68hc11_relax): Likewise.
1758
1759 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1760
1761         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1762
1763 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1764
1765         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1766
1767 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1768
1769         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1770         (md_assemble): Likewise.
1771
1772 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1773
1774         * write.c (size_seg): Always clear SEC_RELOC here.
1775         (install_reloc): New function, extracted from..
1776         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1777         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1778         testing frag size.  Set SEC_RELOC here.
1779
1780 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1781
1782         PR 4082
1783         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1784
1785 2007-02-20  Thiemo Seufer  <ths@mips.com>
1786
1787         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1788
1789 2007-02-20  Thiemo Seufer  <ths@mips.com>
1790
1791         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1792
1793 2007-02-20  Thiemo Seufer  <ths@mips.com>
1794             Chao-Ying Fu  <fu@mips.com>
1795
1796         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1797         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1798         (macro_build): Add case '2'.
1799         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1800         (validate_mips_insn): Add support for balign instruction.
1801         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1802         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1803         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1804         command line options.
1805         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1806         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1807         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1808         .set dspr2, .set nodspr2.
1809
1810 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1811
1812         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1813         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1814
1815 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1816
1817         * write.c (TC_FX_SIZE_SLACK): Define.
1818         (write_relocs): Reinstate check for fixup within frag.
1819         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1820         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1821         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1822         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1823         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1824
1825 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1826             Nathan Sidwell  <nathan@codesourcery.com>
1827             Vladimir Prus  <vladimir@codesourcery.com
1828             Joseph Myers  <joseph@codesourcery.com>
1829
1830         * configure.in (--with-bugurl): New option.
1831         * configure: Regenerate.
1832         * dep-in.sed: Remove bin-bugs.h.
1833         * Makefile.am (REPORT_BUGS_TO): Define.
1834         (INCLUDES): Define REPORT_BUGS_TO.
1835         (DEP_INCLUDES): Likewise.
1836         ($(OBJS)): No longer depend on bin-bugs.h.
1837         * Makefile.in: Regenerate.
1838         * doc/Makefile.in: Regenerate.
1839         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1840         * as.h: Remove include of bin-bugs.h.
1841
1842 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1843
1844         * write.c: White space fixes.
1845         (fixup_segment): Move symbol_mri_common_p adjustments..
1846         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1847         (adjust_reloc_syms): ..to here.
1848
1849 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1850
1851         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1852         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1853         (subseg_set_rest): Remove unnecessary cast.
1854         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1855         Remove unnecessary forward declarations and casts.
1856         (set_symtab): Delete extern bfd_alloc.
1857         (fixup_segment): Move.
1858
1859 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1860
1861         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1862         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1863         (mcf5475_ctrl, mcf5485_ctrl): New.
1864         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1865         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1866         (init_table): Add asid, mmubar, adjust rombar0.
1867
1868 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1869
1870         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1871         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1872         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1873         code, and test for these insns using a combination of
1874         opcode_modifier and operand_types.
1875
1876 2007-02-07  Paul Brook  <paul@codesourcery.com>
1877
1878         * configure.tgt: Add arm*-*-uclinux-*eabi.
1879
1880 2007-02-05  Dave Brolley  <brolley@redhat.com>
1881             Richard Sandiford  <rsandifo@redhat.com>
1882             DJ Delorie  <dj@redhat.com>
1883             Stan Cox  <scox@redhat.com>
1884             Jim Blandy  <jimb@redhat.com>
1885             Nick Clifton  <nickc@redhat.com>
1886             Jim Wilson  <wilson@redhat.com>
1887             Frank Ch. Eigler  <fche@redhat.com>
1888             Graydon Hoare  <graydon@redhat.com>
1889             Ben Elliston  <bje@redhat.com>
1890             John Healy  <jhealy@redhat.com>
1891             Richard Henderson  <rth@redhat.com>
1892
1893         * Makefile.am (CPU_TYPES): Add mep.
1894         (TARGET_CPU_CFILES): Add tc-mep.c.
1895         (TARGET_CPU_HFILES): Add tc-mep.h.
1896         (DEPTC_mep_elf): New variable.
1897         (DEPTC_mep_coff): Likewise.
1898         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1899         * configure.in: Support mep.
1900         * configure.tgt: Likewise.
1901         * config/tc-mep.c: New file.
1902         * config/obj-elf.c: New file.
1903         * config/tc-mep.c: New file.
1904         * config/tc-mep.h: New file.
1905         * testsuite/gas/mep: New testsuite with content.
1906         * Makefile.in: Regenerate.
1907         * configure: Regenerate.
1908
1909 2007-02-05  Dave Brolley  <brolley@redhat.com>
1910
1911         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1912         (complex_reloc_installation_howto): Removed.
1913
1914 2007-02-05  Dave Brolley  <brolley@redhat.com>
1915             Graydon Hoare  <graydon@redhat.com>
1916             DJ Delorie  <dj@redhat.com>
1917             Catherine Moore  <clm@redhat.com>
1918             Michael Chastain  <chastain@redhat.com>
1919             Frank Ch. Eigler  <fche@redhat.com>
1920
1921         * symbols.c (use_complex_relocs_for): New, to decide
1922         when to use complex relocs. Add signed RELC support.
1923         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1924         encode expression symbols as mangled complex relocation symbols (when
1925         compiled with -DOBJ_COMPLEX_RELOC).
1926         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1927         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1928         encode_addend with new args. Modify to get start, length from
1929         ifield whenever it is set. Also change condition on which
1930         self-describing relocs are encoded. Add hook into
1931         gas_cgen_encode_addend.
1932         (queue_fixup_recursively): Add signed RELC support. Change from masked
1933         expr to trunc flag. Restore assignment of sub-field value to
1934         temporary in fixups array. Reflect changed meaning of last arg to
1935         queue_fixup_recursively.
1936         (fixup): Add cgen_maybe_multi_ifield member.
1937         (make_right_shifted_expr): New function.
1938         (queue_fixup): Change to recursive function that fragments
1939         fixups if operand has a multi-ifield.
1940         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1941         symbols, call weak_operand_overflow_check, and fragment call
1942         queue_fixup with operand fields.
1943         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1944         (weak_operand_overflow_check): New function to try to select
1945         insns correctly.
1946         (gas_cgen_encode_addend): New function for relc.
1947         (gas_cgen_install_complex_reloc): Likewise.
1948         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1949         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1950         cgen_maybe_multi_ifield field to fx_cgen substructure.
1951         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1952         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1953
1954 2007-02-03  DJ Delorie  <dj@delorie.com>
1955
1956         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1957         byte relocs.
1958         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1959         (m32c_cons_fix_new): Prototype.
1960
1961 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1962
1963         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1964         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1965
1966 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1967
1968         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1969         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1970         (map_suffix_reloc_to_operator): New.
1971         (map_operator_to_reloc): New.
1972         (expression_maybe_register): Fix incorrect test of return value from
1973         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1974         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1975
1976 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1977
1978         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1979         (tinsn_get_tok): Delete prototype.
1980         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1981
1982 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1983
1984         * config/xtensa-relax.h (struct build_instr): Delete id field.
1985         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1986         and LABEL tokens.
1987         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1988         set op_data fields to zero.
1989         (parse_id_constant): Delete.
1990         (build_transition): Remove code to handle numbered literals and labels.
1991
1992 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1993
1994         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1995         (build_transition_table): Likewise.
1996
1997 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1998
1999         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
2000         fx_tcbit.
2001         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
2002
2003 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
2004
2005         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
2006         (struct fix <fx_plt>): Rename to tcbit2.
2007         * write.c (fix_new_internal): Adjust.
2008         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2009         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2010         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2011         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2012         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2013         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2014         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2015         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
2016         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
2017         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
2018         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
2019         Instead, compare fx_r_type.
2020         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
2021         fx_tcbit in place of fx_plt.
2022         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
2023         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
2024         to fx_plt.
2025
2026 2007-01-30  Nick Clifton  <nickc@redhat.com>
2027
2028         * as.c (main): Mark symbols created via the --defsym command line
2029         option as volatile so that they can be overridden later on by a
2030         .set directive.  This maintains compatibility with the behaviour
2031         of earlier versions of the assembler.
2032         * doc/as.texinfo (--defsym): Document that the defined symbol's
2033         value can be overridden via a .set directive.
2034
2035 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
2036
2037         * config/tc-i386.c (swap_imm_operands): Renamed to ...
2038         (swap_2_operands): This.  Take 2 ints.
2039         (md_assemble): Updated.
2040         (swap_operands): Call swap_2_operands to swap 2 operands.
2041
2042 2007-01-24  DJ Delorie  <dj@redhat.com>
2043
2044         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
2045
2046 2007-01-22  Nick Clifton  <nickc@redhat.com>
2047
2048         PR gas/3871
2049         * tc-score.c: Remove unnecessary uses of _().
2050         Make the err_msg[] a file level local array in order to save
2051         storage space.
2052         Remove unnecessary sprintf()s.
2053
2054 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
2055
2056         PR gas/3871
2057         * config/tc-score.c : Using _() for const string.
2058         Do not assign inst.error with a local string pointer.
2059         (md_section_align): Pad section.
2060
2061 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
2062
2063         * config/tc-i386.c (build_modrm_byte): Check number of operands
2064         when procssing memory/register operand.
2065
2066 2007-01-12  Nick Clifton  <nickc@redhat.com>
2067
2068         PR gas/3856
2069         * macro.c (expand_irp): Do not ignore spaces inside quoted
2070         strings.
2071
2072 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2073
2074         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2075         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2076         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2077         (TC_FORCE_RELOCATION): Define.
2078         (TC_FORCE_RELOCATION_LOCAL): Define.
2079         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2080
2081 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2082
2083         * input-file.c (input_file_open): Check fgets return.
2084
2085 2007-01-11  Paul Brook  <paul@codesourcery.com>
2086
2087         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2088
2089 2007-01-11  Nick Clifton  <nickc@redhat.com>
2090
2091         PR gas/3707
2092         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2093         variable.
2094
2095         * config/tc-mcore.c (md_number_to_chars): Use
2096         number_to_chars_{big|little}endian.
2097
2098 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2099
2100         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2101         architecture by itself.
2102         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2103         (m68k_elf_final_processing): Treat Fido as an architecture by
2104         itself.
2105
2106 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2107
2108         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2109
2110 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2111
2112         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2113         depending on allow_naked_reg.
2114
2115 2007-01-04  Paul Brook  <paul@codesourcery.com>
2116
2117         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2118
2119 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2120
2121         PR gas/3830
2122         * config/tc-i386.c (register_prefix): New.
2123         (set_intel_syntax): Set set_intel_syntax to "" if register
2124         prefix isn't needed.
2125         (check_byte_reg): Use register_prefix for error message.
2126         (check_long_reg): Likewise.
2127         (check_qword_reg): Likewise.
2128         (check_word_reg): Likewise.
2129
2130 2007-01-04  Julian Brown  <julian@codesourcery.com>
2131
2132         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2133         (do_neon_qshl_imm): Likewise.
2134         (do_neon_rshl): New function. Handle rounding variants of
2135         v{q}shl-by-register.
2136         (insns): Use do_neon_rshl for vrshl, vqrshl.
2137
2138 2007-01-04  Paul Brook  <paul@codesourcery.com>
2139
2140         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2141         and vacle.
2142
2143 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2144
2145         * config/tc-i386.c (swap_operands): Remove branches.
2146
2147 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2148
2149         * config/tc-i386.c: Update copyright year.
2150         * config/tc-i386.h: Likewise.
2151
2152 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2153
2154         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2155         instead of int.
2156
2157 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2158
2159         * config/tc-i386.c: Convert to ISO C90 formatting
2160         * config/tc-i386.h: Likewise.
2161
2162 2007-01-03  David Daney  <ddaney@avtrex.com>
2163
2164         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2165         documentation.
2166
2167 For older changes see ChangeLog-2006
2168 \f
2169 Local Variables:
2170 mode: change-log
2171 left-margin: 8
2172 fill-column: 74
2173 version-control: never
2174 End: