gas/ChangeLog

   1 2007-10-11  Nick Clifton  <nickc@redhat.com>
   2
   3         * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
   4
   5 2007-10-08  Maciej W. Rozycki  <macro@linux-mips.org>
   6
   7         * config/tc-mips.c (AT): Rename to...
   8         (ATREG): ... this.
   9         (AT): New definition.
  10         (mips_set_options): Rename "noat" to "at"; change the type.
  11         (mips_opts): Update accordingly.
  12         (append_insn): Likewise.
  13         (macro_build_ldst_constoffset): Likewise.
  14         (load_address): Likewise.
  15         (macro, macro2): Likewise.
  16         (s_mipsset): Handle ".set at=REG".  Update handling of ".set at"
  17         and ".set noat".
  18
  19 2007-10-08  Nick Clifton  <nickc@redhat.com>
  20
  21         * doc/as.texinfo (Previous): Clarify explanation of the behaviour
  22         of this pseudo-op and add a couple of examples.
  23
  24 2007-10-08  Nick Clifton  <nickc@redhat.com>
  25
  26         PR gas/5121 gas/5122 gas/5123
  27         * Makefile.am (CFILES): Add cgen.c
  28         (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
  29         tc-tic4x.c and xtensa-relax.c.
  30         (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
  31         tc-tic4x.h and xtensa-relax.h.
  32         (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
  33         te-ic960.h, te-linux.h.  Add te-aix5.h, te-armeabi.h,
  34         te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
  35         (CONFIG_ATOF_CFILES): New variable.
  36         (POTFILES): Add CONFIG_ATOF_CFILES to dependencies.  Fix typo with
  37         dependency upon TARG_ENV_HFILES.
  38         (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
  39         cgen-desc.h when foo-desc.h does not exit.
  40         Run make dep-am.
  41         * Makefile.in: Regenerate.
  42         * doc/Makefile.in: Regenerate.
  43         * po/POTFILES.in: Regenerate.
  44         PR gas/5124 gas/5125
  45         * po/es.po: Regenerate.
  46         * po/fr.po: Regenerate.
  47         * po/gas.pot: Regenerate.
  48         * po/rw.po: Regenerate.
  49         * po/tr.po: Regenerate.
  50         * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
  51         of error messages.
  52         PR gas/5126
  53         * config/obj-som.c: Likewise.
  54         PR gas/5129
  55         * config/tc-arc.c: Likewise.
  56         PR gas/5131 gas/5132
  57         * config/tc-arm.c: Likewise.
  58         PR gas/5137
  59         * config/tc-bfin.c: Likewise.
  60         PR gas/5143
  61         * config/tc-frv.c: Likewise.
  62         PR gas/5142
  63         * config/tc-dlx.c: Likewise.
  64
  65 2007-10-08  Eric B. Weddington  <eweddington@cso.atmel.com>
  66
  67         * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
  68         ATtiny48, AT90PWM216, AT90PWM316.
  69         * doc/c-avr.texi: Document new devices.
  70
  71 2007-10-08  Nick Clifton  <nickc@redhat.com>
  72
  73         PR gas/5133
  74         * config/tc-arm.c (md_apply_fix): Correct error message.
  75         PR gas/5134
  76         * config/tc-arm.c (md_apply_fix): Likewise.
  77         PR gas/5136
  78         * config/tc-bfin.c (md_apply_fix): Fix error message.
  79         PR gas/5135
  80         (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
  81
  82 2007-10-05  H.J. Lu  <hongjiu.lu@intel.com>
  83
  84         * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
  85         immediate operands directly for instructions with 4 operands.
  86
  87 2007-10-04  H.J. Lu  <hongjiu.lu@intel.com>
  88
  89         PR gas/5109
  90         * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
  91         is ignored in Intel mode.
  92
  93 2007-10-04  Helge Deller  <deller@gmx.de>
  94
  95         * read.c (potable): Add string8, string16, string32 and string64.
  96         Add bit size for stringer function.
  97         (stringer_append_char): New.
  98         (stringer): Use stringer_append_char().
  99         * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
 100         * config/obj-elf.c (obj_elf_ident): Likewise.
 101         * config/tc-alpha.c (s_alpha_stringer): Likewise.
 102         * config/tc-dlx.c (dlx_pseudo_table): Likewise.
 103         * config/tc-hppa.c (pa_stringer): Likewise.
 104         * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
 105         * config/tc-m68hc11.c (md_pseudo_table): Likewise.
 106         * config/tc-mcore.c (md_pseudo_table): Likewise.
 107         * config/tc-mips.c (mips_pseudo_table): Likewise.
 108         * config/tc-spu.c (md_pseudo_table): Likewise.
 109         * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
 110         * doc/as.texinfo (ABORT): Fix identing.
 111         (String): Document new string8, string16, string32, string64
 112         functions.
 113         * NEWS: Mention the new feature.
 114
 115 2007-10-03  Nick Clifton  <nickc@redhat.com>
 116
 117         PR gas/5078
 118         * config/tc-avr.c (avr_get_constant): Extend error message to
 119         mention that the constant must be positive.
 120
 121 2007-10-03  Nick Clifton  <nickc@redhat.com>
 122
 123         * config/tc-avr.c (avr_get_constant):
 124         PR gas/5089
 125         * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
 126         PR gas/5090
 127         (md_assemble): Fix spelling typo.
 128
 129 2007-10-03  Alan Modra  <amodra@bigpond.net.au>
 130
 131         PR 4303
 132         * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
 133
 134 2007-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 135
 136         * config/tc-cr16.c: Replaced 'tabs' with white spaces and
 137         added R_CR16_DISP8 as default reloc type for b<cc> instructions.
 138
 139 2007-09-30  H.J. Lu  <hongjiu.lu@intel.com>
 140
 141         PR gas/5080
 142         * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
 143         (check_qword_reg): Also handle cvttsd2si.
 144
 145 2007-09-27  Kazu Hirata  <kazu@codesourcery.com>
 146
 147         * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
 148         (last_movec_reg): Change to MBO.
 149         * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
 150         (m68k_ip): Use MBO instead of MBO.
 151         (init_table): Use MBO instead of MBO.  Add an entry for mbo.
 152
 153 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 154
 155         * config/tc-i386.c (build_modrm_byte): Also check for RegEip
 156         when considering IP-relative addressing.
 157
 158 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 159
 160         * config/tc-i386.h (md_register_arithmetic): Define.
 161         * config/tc-ia64.h (md_register_arithmetic): Likewise.
 162         * doc/internals.texi: Document md_register_arithmetic.
 163         * expr.c (make_expr_symbol): Force O_register expressions into
 164         reg_section.
 165         (expr): Provide default for md_register_arithmetic. Don't resolve
 166         adding/subtracting constants to/from registers if
 167         md_register_arithmetic is zero.
 168
 169 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 170
 171         * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
 172         (cfi_finish): Add second empty instance.
 173
 174 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 175
 176         * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
 177         with simple call to parse_operand.
 178
 179 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 180
 181         * config/tc-i386.c (NUM_FLAG_CODE): Remove.
 182
 183 2007-09-26  Jan Beulich  <jbeulich@novell.com>
 184
 185         * as.c (itbl_parse): Remove #define.
 186         (struct itbl_file_list): Move down and ...
 187         (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
 188         (show_usage): Conditionalize printing of --itbl option upon
 189         HAVE_ITBL_CPU.
 190         (parse_args): Conditionalize handling of -t/--itbl options upon
 191         HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
 192         't'.
 193
 194 2007-09-25  H.J. Lu  <hongjiu.lu@intel.com>
 195
 196         * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
 197         check opcode length.
 198
 199 2007-09-25  Nathan Sidwell  <nathan@codesourcery.com>
 200
 201         * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
 202         (BRANCHBWPL, FRAG_VAR_SIZE): New.
 203         (md_relax_table): Add BRANCHBWPL entries.
 204         (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
 205         (md_assemble): Use FRAG_VAR_SIZE.
 206         (md_convert_frag_1): Add BRANCHBWPL cases.
 207         (md_estimate_size_before_relaz): Likewise.
 208
 209 2007-09-24  Carlos O'Donell  <carlos@codesourcery.com>
 210
 211         * config/tc-mips.c (s_align): Set max_alignment to 28.
 212
 213 2007-09-20  H.J. Lu  <hongjiu.lu@intel.com>
 214
 215         PR 658
 216         * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
 217         (set_allow_index_reg): New.
 218         (allow_index_reg): Likewise.
 219         (md_pseudo_table): Add "allow_index_reg" and
 220         "disallow_index_reg".
 221         (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
 222         fake index registers.
 223         (i386_scale): Updated.
 224         (i386_index_check): Support fake index registers.
 225         (parse_real_register): Return NULL on eiz/riz if fake index
 226         registers aren't allowed.
 227
 228 2007-09-19  Nick Clifton  <nickc@redhat.com>
 229
 230         * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
 231         fixups.
 232
 233 2007-09-19  Bob Wilson  <bob.wilson@acm.org>
 234
 235         * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
 236
 237 2007-09-18  Bernd Schmidt  <bernd.schmidt@analog.com>
 238
 239         * config/bfin-parse.y (asm_1): Slightly improve error messages
 240         for "reg += const;".
 241
 242 2007-09-18  Alan Modra  <amodra@bigpond.net.au>
 243
 244         PR gas/5026
 245         * read.c (emit_expr): Only use long long if required and available.
 246
 247 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 248
 249         * config/tc-i386.c (baseindex): Removed.
 250         (build_modrm_byte): Check reg_num for RIP register instead of
 251         reg_type.
 252         (i386_index_check): Likewise.
 253
 254 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 255
 256         PR gas/5035
 257         * config/obj-coff.c (obj_coff_endef): Remove checking size of
 258         def_symbol_in_progress.
 259
 260 2007-09-17  Evandro Menezes  <evandro@yahoo.com>
 261
 262         PR gas/5026
 263         * read.c (emit_expr): Use unsigned long long values in warning
 264         message about truncated expressions.
 265
 266 2007-09-17  H.J. Lu  <hongjiu.lu@intel.com>
 267
 268         * config/tc-i386.c (intel_e04): Revert the last change.
 269
 270 2007-09-17  Nick Clifton  <nickc@redhat.com>
 271
 272         * po/es.po: Updated Spanish translation.
 273
 274 2007-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 275
 276         PR gas/5034
 277         * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
 278         T_NIL.
 279
 280 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 281
 282         * config/tc-i386.c (build_modrm_byte): Adjust comment line
 283         wrap.
 284
 285 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 286
 287         * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
 288         of (A || B) != 0.
 289
 290 2007-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * config/tc-i386.c (build_modrm_byte): Adjust indentation.
 293
 294 2007-09-14  Michael Meissner  <michael.meissner@amd.com>
 295             Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 296             Tony Linthicum  <tony.linthicum@amd.com>
 297
 298         * NEWS: Add SSE5 support to NEWS file.
 299
 300         * config/tc-i386.h (drex_byte): Add fields to allow process_drex
 301         and build_modrm_byte to communicate.
 302         (DREX_OC0): New SSE5 macro.
 303         (DREX_OC0_MASK): Ditto.
 304         (DREX_OC1): Ditto.
 305         (DREX_OC1_MASK): Ditto.
 306         (DREX_XMEM_X1_X2_X2): Ditto.
 307         (DREX_X1_XMEM_X2_X2): Ditto.
 308         (DREX_X1_XMEM_X2_X1: Ditto.
 309         (DREX_X1_X2_XMEM_X1: Ditto.
 310         (DREX_XMEM_X1_X2): Ditto.
 311         (DREX_X1_XMEM_X2): Ditto.
 312         (drex_byte): New structure to describe the DREX byte.
 313
 314         * config/tc-i386.c (process_drex): New function to handle SSE5
 315         DREX bits.
 316         (build_modrm_byte): Use the information cached away in
 317         process_drex in the case of DREX instructions.
 318         (i386_insn): Add drex field.
 319         (pi): Add debugging of drex field.
 320         (md_assemble): Treat SSE5 like SSE3 in instructions with an
 321         immediate byte.  Move REX field to DREX if this is a DREX
 322         instruction.
 323         (process_operands): Add SSE5 support.
 324         (build_modrm_byte): Ditto.
 325         (output_insn): Ditto.
 326         (cpu_arch): Ditto.
 327         (i386_align_code): Ditto.
 328
 329 2007-09-12  Jan Beulich  <jbeulich@novell.com>
 330
 331         * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
 332         after generic operand swapping, and swap only the immediate operands.
 333
 334 2007-09-11  Nathan Sidwell  <nathan@codesourcery.com>
 335
 336         * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
 337         (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
 338
 339 2007-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 340
 341         * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
 342         byte opcode.
 343
 344 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 345
 346         * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
 347         (cpu_flags_check_cpu64): This. Inline.
 348         (uints_all_zero): New.
 349         (uints_set): Likewise
 350         (uints_equal): Likewise
 351         (UINTS_ALL_ZERO): Likewise
 352         (UINTS_SET): Likewise
 353         (UINTS_CLEAR): Likewise
 354         (UINTS_EQUAL): Likewise
 355         (cpu_flags_and): Likewise.
 356         (cpu_flags_or): Likewise.
 357         (operand_type_and): Likewise.
 358         (operand_type_or): Likewise.
 359         (operand_type_xor): Likewise.
 360         (cpu_flags_not): Inline and use switch instead of loop.
 361         (cpu_flags_match): Updated.
 362         (operand_type_match): Likewise.
 363         (smallest_imm_type): Likewise.
 364         (set_cpu_arch): Likewise.
 365         (pt): Likewise.
 366         (md_assemble): Likewise.
 367         (parse_insn): Likewise.
 368         (optimize_imm): Likewise.
 369         (match_template): Likewise.
 370         (process_suffix): Likewise.
 371         (update_imm): Likewise.
 372         (finalize_imm): Likewise.
 373         (process_operands): Likewise.
 374         (build_modrm_byte): Likewise.
 375         (i386_immediate): Likewise.
 376         (i386_displacement): Likewise.
 377         (i386_index_check): Likewise.
 378         (i386_operand): Likewise.
 379         (i386_target_format): Likewise.
 380         (intel_e11): Likewise.
 381         (operand_type): Remove implicitregister.
 382         (operand_type_check): Updated. Inline.
 383         (cpu_flags_all_zero): Removed.
 384         (operand_type_all_zero): Likewise.
 385         (i386_array_biop): Likewise.
 386         (cpu_flags_biop): Likewise.
 387         (operand_type_biop): Likewise.
 388
 389 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 390
 391         * Makefile.am: Run "make dep-am".
 392         * Makefile.in: Regenerate.
 393
 394 2007-09-08  H.J. Lu  <hongjiu.lu@intel.com>
 395
 396         * configure.in (AC_CHECK_HEADERS): Add limits.h.
 397         * configure: Regenerated.
 398         * config.in: Likewise.
 399
 400         * config/tc-i386.c: Include "opcodes/i386-init.h".
 401         (_i386_insn): Use i386_operand_type for types.
 402         (cpu_arch_flags): Updated to new types with bitfield.
 403         (cpu_arch_tune_flags): Likewise.
 404         (cpu_arch_isa_flags): Likewise.
 405         (cpu_arch): Likewise.
 406         (i386_align_code): Likewise.
 407         (set_code_flag): Likewise.
 408         (set_16bit_gcc_code_flag): Likewise.
 409         (set_cpu_arch): Likewise.
 410         (md_assemble): Likewise.
 411         (parse_insn): Likewise.
 412         (process_operands): Likewise.
 413         (output_branch): Likewise.
 414         (output_jump): Likewise.
 415         (parse_real_register): Likewise.
 416         (mode_from_disp_size): Likewise.
 417         (smallest_imm_type): Likewise.
 418         (pi): Likewise.
 419         (type_names): Likewise.
 420         (pt): Likewise.
 421         (pte): Likewise.
 422         (swap_2_operands): Likewise.
 423         (optimize_imm): Likewise.
 424         (optimize_disp): Likewise.
 425         (match_template): Likewise.
 426         (check_string): Likewise.
 427         (process_suffix): Likewise.
 428         (check_byte_reg): Likewise.
 429         (check_long_reg): Likewise.
 430         (check_qword_reg): Likewise.
 431         (check_word_reg): Likewise.
 432         (finalize_imm): Likewise.
 433         (build_modrm_byte): Likewise.
 434         (output_insn): Likewise.
 435         (disp_size): Likewise.
 436         (imm_size): Likewise.
 437         (output_disp): Likewise.
 438         (output_imm): Likewise.
 439         (gotrel): Likewise.
 440         (i386_immediate): Likewise.
 441         (i386_displacement): Likewise.
 442         (i386_index_check): Likewise.
 443         (i386_operand): Likewise.
 444         (parse_real_register): Likewise.
 445         (i386_intel_operand): Likewise.
 446         (intel_e09): Likewise.
 447         (intel_bracket_expr): Likewise.
 448         (intel_e11): Likewise.
 449         (cpu_arch_flags_not): New.
 450         (cpu_flags_check_x64): Likewise.
 451         (cpu_flags_all_zero): Likewise.
 452         (cpu_flags_not): Likewise.
 453         (i386_cpu_flags_biop): Likewise.
 454         (cpu_flags_biop): Likewise.
 455         (cpu_flags_match); Likewise.
 456         (acc32): New.
 457         (acc64): Likewise.
 458         (control): Likewise.
 459         (reg16_inoutportreg): Likewise.
 460         (disp16): Likewise.
 461         (disp32): Likewise.
 462         (disp32s): Likewise.
 463         (disp16_32): Likewise.
 464         (anydisp): Likewise.
 465         (baseindex): Likewise.
 466         (regxmm): Likewise.
 467         (imm8): Likewise.
 468         (imm8s): Likewise.
 469         (imm16): Likewise.
 470         (imm32): Likewise.
 471         (imm32s): Likewise.
 472         (imm64): Likewise.
 473         (imm16_32): Likewise.
 474         (imm16_32s): Likewise.
 475         (imm16_32_32s): Likewise.
 476         (operand_type): Likewise.
 477         (operand_type_check): Likewise.
 478         (operand_type_match): Likewise.
 479         (operand_type_register_match): Likewise.
 480         (update_imm): Likewise.
 481         (set_code_flag): Also update cpu_arch_flags_not.
 482         (set_16bit_gcc_code_flag): Likewise.
 483         (md_begin): Likewise.
 484         (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
 485         Use cpu_flags_match to match instructions.
 486         (i386_target_format): Update cpu_arch_isa_flags and
 487         cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
 488         (smallest_imm_type): Check cpu_arch_tune to tune for i486.
 489         (match_template): Don't initialize overlap0, overlap1,
 490         overlap2, overlap3 and operand_types.
 491         (process_suffix): Handle crc32 with 64bit register.
 492         (MATCH): Removed.
 493         (CONSISTENT_REGISTER_MATCH): Likewise.
 494
 495         * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
 496         type.
 497
 498 2007-09-06  H.J. Lu  <hongjiu.lu@intel.com>
 499
 500         * config/tc-i386.c (match_template): Handle invlpga, vmload,
 501         vmrun and vmsave in SVME.
 502         (process_suffix): Likewise.
 503
 504 2007-09-05  H.J. Lu  <hongjiu.lu@intel.com>
 505
 506         * config/tc-i386.c (i386_index_check): Don't use RegRex
 507         on the reg_type field.
 508         (parse_real_register): Use `||' instead of `|'.
 509
 510 2007-09-04  H.J. Lu  <hongjiu.lu@intel.com>
 511
 512         * config/tc-i386.c (process_operands): Remove segment override
 513         check on SVME instructions.
 514         (i386_index_check): Remove memory operand check on SVME
 515         instructions.
 516
 517 2007-09-04  Alan Modra  <amodra@bigpond.net.au>
 518
 519         * config/tc-spu.c (struct spu_insn): Delete "flag".  Add "reloc".
 520         (md_assemble): Update init of insn.  Use insn.reloc instead of
 521         calculating from flag.
 522         (get_imm): Set reloc rather than flag.
 523         (calcop): Formatting.
 524
 525 2007-08-29  Daniel Jacobowitz  <dan@codesourcery.com>
 526
 527         * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
 528
 529 2007-08-28  Daniel Jacobowitz  <dan@codesourcery.com>
 530
 531         * doc/c-arc.texi: Fix typo.
 532
 533 2007-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 534
 535         * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
 536         Intel mode.
 537
 538 2007-08-28  Nathan Sidwell  <nathan@codesourcery.com>
 539
 540         * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
 541         (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
 542         (mcf5407_ctrl): New.
 543         (m68k_cpus): Adjust 5407 entry.
 544
 545 2007-08-28  Maxim Kuvyrkov  <maxim@codesourcery.com>
 546
 547         * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
 548         (m68k_cpus): Define 51QE cpu.
 549
 550 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
 551             Joseph Myers  <joseph@codesourcery.com>
 552
 553         * as.c (main): Flush stderr before printing listings to ensure
 554         consistent output order across platforms.
 555
 556 2007-08-28  Robert Sebastian Gerus  <arachnist@gmail.com>
 557
 558         * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
 559
 560 2007-08-24  Joseph Myers  <joseph@codesourcery.com>
 561             Paul Brook  <paul@codesourcery.com>
 562
 563         * remap.c: New.
 564         * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
 565         * as.c (show_usage): Document --debug-prefix-map option.
 566         (parse_args): Handle --debug-prefix-map.
 567         * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
 568         * stabs.c (stabs_generate_asm_file): Remap debug paths.
 569         * Makefile.am (GAS_CFILES): Add remap.c
 570         (GENERIC_OBJS): Add remap.o.
 571         Regenerate dependencies.
 572         * Makefile.in: Regenerate.
 573         * doc/as.texinfo (--debug-prefix-map): Document.
 574
 575 2007-08-24  Aurelien Jarno  <aurel32@debian.org>
 576
 577         * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
 578         before printing them.
 579
 580 2007-08-24  Anders Waldenborg  <anders@0x63.nu>
 581             Alan Modra  <amodra@bigpond.net.au>
 582
 583         * config/tc-i386.c (lex_got): Don't scan past a comma.
 584
 585 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 586
 587         * config/tc-ppc.c (parse_cpu): Handle "750cl".
 588         (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
 589         (md_show_usage): Document -m750cl.
 590         (md_assemble): Handle two delimiters in succession (eg. `),').
 591         * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
 592         * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
 593         * testsuite/gas/ppc/ppc750ps.s: New file.
 594         * testsuite/gas/ppc/ppc750ps.d: Likewise.
 595
 596 2007-08-23  Ben Elliston  <bje@au.ibm.com>
 597
 598         * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
 599
 600 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 601
 602         PR gas/4079
 603         * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
 604         expressions.
 605         (i386_immediate): Detect and complain about more cases of
 606         invalid immediate expressions.  Return failure rather than
 607         converting them to zero.
 608         (i386_displacement): Likewise.
 609
 610 2007-08-17  Alan Modra  <amodra@bigpond.net.au>
 611
 612         * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
 613
 614 2007-08-14  Andreas Schwab  <schwab@suse.de>
 615
 616         * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
 617         unrepresentable.
 618
 619 2007-08-12  Matthias Klose  <doko@ubuntu.com>
 620
 621         * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
 622         $(top_srcdir)/../../bfd/doc.
 623         * doc/Makefile.in: Regenerate.
 624
 625 2007-08-10  Nick Clifton  <nickc@redhat.com>
 626
 627         * NEWS: Add a marker for the 2.18 features.
 628
 629 2007-08-09  Paul Brook  <paul@codesourcery.com>
 630
 631         * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
 632
 633 2007-08-09  H.J. Lu  <hongjiu.lu@intel.com>
 634
 635         * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
 636
 637 2007-07-29  H.J. Lu  <hongjiu.lu@intel.com>
 638
 639         * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
 640         DWORD memory to Reg64 in Intel synax.
 641         (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
 642         Reg32 in Intel syntax.
 643
 644 2007-07-25  Sterling Augustine  <sterling@tensilica.com>
 645
 646         * config/tc-xtensa.c (xtensa_extui_opcode): New.
 647         (xg_expand_assembly_insn): Check for invalid extui operands.
 648         (md_begin): Initialize xtensa_extui_opcode.
 649
 650 2007-07-24  Nick Clifton  <nickc@redhat.com>
 651
 652         * config/tc-mep.h (skip_whitespace): Remove definition.
 653
 654 2007-07-23  H.J. Lu  <hongjiu.lu@intel.com>
 655
 656         * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
 657         (f32_15): Removed.
 658         (jump_31): New.
 659         (f32_patt): Remove f32_15.
 660         (f16_patt): Likewise.
 661         (i386_align_code): Updated to alt_long_patt for 64bit by
 662         default.
 663
 664         * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
 665
 666 2007-07-23  Evandro Menezes  <evandro.menezes@amd.com>
 667
 668         * config/tc-i386.c (i386_align_code): Enable alignment up to
 669         MAX_MEM_FOR_RS_ALIGN_CODE bytes.  Remove special treatment
 670         for K8.
 671
 672         * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
 673
 674 2007-07-20  Nick Clifton  <nickc@redhat.com>
 675
 676         * app.c (do_scrub_chars): Provide a one character buffer to hold a
 677         pushed back newline at the end of an unterminated quoted string.
 678
 679 2007-07-14  Nick Clifton  <nickc@redhat.com>
 680
 681         * config/tc-arm.c (create_register_alias): Return a boolean rather
 682         than an integer.
 683         Check the return value of insert_reg_alias and do not continue to
 684         create aliases once an insertion has failed.
 685         (s_unreq): Delete the all-upper-case and all-lower-case
 686         alternatives as well.
 687
 688 2007-07-12  Kai Tietz   <kai.tietz@onevision.com>
 689
 690         * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
 691         * write.c: Likewise.
 692
 693 2007-07-11  Daniel Jacobowitz  <dan@codesourcery.com>
 694
 695         * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
 696         HAVE_64BIT_SYMBOLS.
 697
 698 2007-07-04  Richard Sandiford  <richard@codesourcery.com>
 699
 700         * config/tc-mips.c (mips_cpu_info_table): Add new entries for
 701         {24k,24ke,34k,74k}f{2_1,1_1,x}.  Also add an entry for 74kf3_2.
 702         Deprecate *x and *fx.
 703         * doc/c-mips.texi: Document the new CPU arguments.  Deprecate
 704         *x and *fx.
 705
 706 2007-07-04  H.J. Lu  <hongjiu.lu@intel.com>
 707
 708         * config/obj-coff.h (x86_64_target_format): Renamed to ...
 709         (i386_target_format): This
 710         (TARGET_FORMAT): Use i386_target_format.
 711
 712         * config/tc-i386.c (x86_64_target_format): Removed.
 713         (i386_target_format): Handle PE formats.
 714
 715 2007-07-04  Nick Clifton  <nickc@redhat.com>
 716
 717         * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
 718         to get the right length of printed value.
 719
 720 2007-07-03  Nick Clifton  <nickc@redhat.com>
 721
 722         * COPYING: Replace with GPLv3 text.
 723         * app.c: Update copyright notice to refer to GPLv3.
 724         * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
 725         cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
 726         dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
 727         emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
 728         flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
 729         input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
 730         itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
 731         macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
 732         read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
 733         symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
 734         config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
 735         config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
 736         config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
 737         config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
 738         config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
 739         config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
 740         config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
 741         config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
 742         config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
 743         config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
 744         config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
 745         config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
 746         config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
 747         config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
 748         config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
 749         config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
 750         config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
 751         config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
 752         config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
 753         config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
 754         config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
 755         config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
 756         config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
 757         config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
 758         config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
 759         config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
 760         config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
 761         config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
 762         config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
 763         config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
 764         config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
 765         config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
 766         config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
 767         config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
 768         config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
 769         config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
 770         config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
 771         config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
 772         config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
 773         config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
 774         config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
 775         config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
 776         config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
 777         config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
 778         config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
 779         config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
 780         config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
 781         config/te-netware.h, config/te-sparcaout.h,  config/te-tmips.h,
 782         config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
 783         config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
 784
 785         * flonum-mult.c: Likewise, and also correct typo referring to
 786         non-existant GNU Assembler General Public License.
 787         * config/tc-m68851.h: Likewise.
 788         * NEWS: Mention the new license.  Also note where the 2.17 release
 789         happened.
 790         * config/e-crisaout.c: Add copyright header.
 791         * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
 792         config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
 793         config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
 794         config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
 795         config/te-generic.h, config/te-gnu.h, config/te-go32.h,
 796         config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
 797         config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
 798         config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
 799         config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
 800         config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
 801         config/te-pep.h, config/te-psos.h, config/te-riscix.h,
 802         config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
 803         config/te-wince-pe.h: Likewise.
 804
 805 2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
 806
 807         * config/tc-m68k.c (m68k_ip): Add j & K operand types.
 808         (install_operand): Add E encoding.
 809         (md_begin): Check and skip initial '.' arg character.
 810         (get_num): Add 0..511 case.
 811
 812 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 813
 814         PR 4713
 815         * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
 816         * config/obj-elf.h (obj_ecoff_set_ext): Comment.
 817
 818 2007-07-03  Mikkel Lauritsen  <renard@nospam.dk>
 819
 820         PR 4722
 821         * app.c (do_scrub_chars <state 5>): Check for output buffer full
 822         after memcpy.
 823
 824 2007-07-02  Joseph Myers  <joseph@codesourcery.com>
 825
 826         * config/tc-mips.c (s_dtprelword, s_dtpreldword,
 827         s_dtprel_internal): New.
 828         (mips_pseudo_table): Add .dtprelword and .dtpreldword.
 829         (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
 830         BFD_RELOC_MIPS_TLS_DTPREL64.
 831
 832 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 833
 834         * Makefile.am: Run "make dep-am".
 835         * Makefile.in: Regenerate.
 836         * aclocal.m4: Regenerate.
 837         * config.in: Regenerate.
 838         * doc/Makefile.in: Regenerate.
 839         * po/POTFILES.in: Regenerate.
 840         * po/gas.pot: Regenerate.
 841
 842 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 843
 844         * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
 845         coff section flag values to bfd section flag.
 846
 847 2007-06-30  H.J. Lu  <hongjiu.lu@intel.com>
 848
 849         * aclocal.m4: Regenerated.
 850         * doc/Makefile.in: Likewise.
 851         * Makefile.in: Likewise.
 852
 853 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 854
 855         * as.c (main): Only call create_obj_attrs_section if IS_ELF.
 856
 857 2007-06-29  Joseph Myers  <joseph@codesourcery.com>
 858
 859         * as.c (create_obj_attrs_section): New.
 860         (main): Call create_obj_attrs_section for ELF.
 861         * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
 862         skip_past_comma, s_vendor_attribute): New.
 863         (potable): Add gnu_attribute for ELF.
 864         * read.h (s_vendor_attribute): Declare.
 865         * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
 866         round s_vendor_attribute.
 867         (aeabi_set_public_attributes): Update for new attributes
 868         interfaces.
 869         (arm_md_end): Remove attributes contents setting now done
 870         generically.
 871
 872 2007-06-29  M R Swami Reddy  <MR.Swami.Redd@nsc.com>
 873
 874         * Makefile.am: Add CR16 related entry.
 875         * Makefile.in: Regenerate.
 876         * config/tc-cr16.h: New file
 877         * config/tc-cr16.c: New file
 878         * doc/c-cr16.texi: New file for cr16
 879         * doc/all.texi: Entry for cr16
 880         * doc/Makefile.am: Added c-cr16.texi
 881         * doc/Makefile.in: Regenerate
 882         * doc/as.texinfo: Entry for CR16 target
 883         * NEWS: Announce the support for the new target.
 884
 885 2007-06-26  Paul Brook  <paul@codesourcery.com>
 886
 887         * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
 888         for OP_RVC.
 889         (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
 890
 891 2007-06-25  H.J. Lu  <hongjiu.lu@intel.com>
 892
 893         * config/tc-i386.c (process_operands): Replace regKludge
 894         with RegKludge.
 895
 896 2007-06-25  Richard Sandiford  <richard@codesourcery.com>
 897
 898         * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
 899         * config/tc-mips.c (append_insn): Record which symbols have
 900         R_MIPS16_26 relocations against them.
 901         (mips_fix_adjustable): Don't reduce relocations against such symbols.
 902
 903 2007-06-22  Sterling Augustine  <sterling@tensilica.com>
 904
 905         * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
 906         (frag_format_size): Handle RELAX_IMMED_STEP3.
 907         (xtensa_relax_frag, md_convert_frag): Likewise.
 908         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
 909         (RELAX_IMMED_MAXSTEPS): Adjust.
 910         * config/xtensa-relax.c (widen_spec_list): Add transitions from
 911         wide branches to branch-over-jumps.
 912         (build_transition): Handle wide branches in transition patterns.
 913
 914 2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>
 915
 916         * config/tc-i386.c (disp_size): New.
 917         (imm_size): Likewise.
 918         (output_disp): Use disp_size and imm_size.
 919         (output_imm): Use imm_size.
 920
 921 2007-06-19  Sterling Augustine  <sterling@tensilica.com>
 922
 923         * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
 924         use of literal_frag field.
 925         * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
 926         in the literal_frag field.
 927         (xtensa_move_literals): Use it here instead of searching.  Update
 928         literal_frag field with new value.
 929
 930 2007-06-14  Paul Brook  <paul@codesourcery.com>
 931
 932         * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
 933         narrow shift by immediate.
 934
 935 2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>
 936
 937         * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
 938
 939         * acinclude.m4: Don't include m4 files.
 940         (BFD_BINARY_FOPEN): Removed.
 941         Remove libtool kludge.
 942
 943         * Makefile.in: Regenerated.
 944         * doc/Makefile.in: Likewise.
 945         * aclocal.m4: Likewise.
 946         * configure: Likewise.
 947
 948 2007-06-11  Sterling Augustine  <sterling@tensilica.com>
 949             Bob Wilson  <bob.wilson@acm.org>
 950
 951         * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
 952         (XTENSA_PROP_NO_TRANSFORM): ...this.
 953         (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
 954         (xtensa_mark_frags_for_org): New.
 955         (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
 956         (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
 957         (get_frag_property_flags): Adjust reference to is_no_transform flag.
 958         (xtensa_frag_flags_combinable): Likewise.
 959         (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
 960         * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
 961
 962 2007-06-06  Paul Brook  <paul@codesourcery.com>
 963
 964         * config/tc-arm.c (s_align): Pad code sections appropriately.
 965
 966 2007-06-05  Paul Brook  <paul@codesourcery.com>
 967
 968         * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
 969
 970 2007-06-05  Nick Clifton  <nickc@redhat.com>
 971
 972         PR gas/4587
 973         * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
 974
 975 2007-06-05  Alan Modra  <amodra@bigpond.net.au>
 976
 977         * config/tc-spu.c (spu_cons): Use deferred_expression.  Handle
 978         number@ppu.
 979         (tc_gen_reloc): Abort if neither addsy or subsy is set.
 980         (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
 981         * config/tc-spu.h (md_operand): Handle @ppu without sym.
 982
 983 2007-05-31  Paul Brook  <paul@codesourcery.com>
 984
 985         * config/tc-arm.c (insns): Allow strex on M profile cores.
 986
 987 2007-05-29  David S. Miller  <davem@davemloft.net>
 988             Jakub Jelinek  <jakub@redhat.com>
 989
 990         PR gas/4558
 991         * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
 992         for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
 993
 994 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 995
 996         * config/tc-spu.h: Wrap in #ifndef/#endif.  Delete coff macros.
 997
 998 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
 999
1000         * config/tc-ppc.c: Convert to ISO C.
1001         * config/tc-ppc.c: Likewise.
1002
1003 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
1004
1005         * write.h (EXEC_MACHINE_TYPE): Delete.
1006         (string_byte_count, section_alignment): Delete.
1007
1008 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
1009
1010         * app.c (do_scrub_chars): Cope with \ at end of buffer.
1011
1012 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
1013
1014         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
1015         top 32 bits of 64 bit value if so doing results in passing
1016         range check.  Rewrite sign extension fudges similarly.  Enable
1017         fudges for powerpc64 too.  Report user value if range check
1018         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
1019         range rather than value, also to report user value on failure.
1020
1021 2007-03-25  Paul Brook  <paul@codesourcery.com>
1022
1023         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
1024         (do_t_add_sub): Correctly encode subs pc, lr, #const.
1025         (do_t_mov_cmp): Correctly encode movs pc, lr.
1026
1027 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
1028
1029         * Makefile.in: Regnerate.
1030         * configure: Regenerate.
1031         * aclocal.m4: Regenerate.
1032         * doc/Makefile.in: Regenerate.
1033
1034 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
1035
1036         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
1037         and index entries about automatic alignment of ENTRY instructions.
1038
1039 2007-05-22  Nick Clifton  <nickc@redhat.com>
1040
1041         * doc/as.texinfo: Use @copying around the copyright notice.
1042
1043 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
1044
1045         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
1046         containing a comma.
1047
1048 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
1049
1050         PR gas/4517
1051         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
1052         * doc/as.texinfo: Document new directives: .cfi_restore,
1053         .cfi_undefined, .cfi_same_value, .cfi_return_column,
1054         .cfi_remember_state and .cfi_restore_state.
1055
1056 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
1057
1058         * config/tc-m68k.c (md_apply_fix): Show value of out of range
1059         fixups in error message.
1060         (md_conver_frag_1): Propagate the fix source location and use
1061         as_bad_where rather than fatal, for better error messages.
1062
1063 2007-05-16  Paul Brook  <paul@codesourcery.com>
1064
1065         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
1066
1067 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
1068
1069         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
1070
1071 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
1072
1073         PR gas/3041
1074         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
1075         addend is stored for relocs against weak symbols.
1076         (md_apply_fix): So not loose track of addend for relocs against
1077         weak symbols.
1078
1079 2007-05-14  Thiemo Seufer  <ths@mips.com>
1080
1081         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
1082
1083 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
1084
1085         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
1086         addri, addri.c, subi, and subi.c when immediate number is hex.
1087         (score_insns): Remove subis and subis.c.
1088         (do_sub_rdi16): Delete.
1089
1090 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
1091
1092         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
1093         spu_cons for word.
1094         (md_assemble): Tidy use of insn.flag.
1095         (get_imm): Likewise.  Handle uppercase input too.
1096         (spu_cons): New function.
1097         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
1098         (TC_FORCE_RELOCATION): Don't resolve them either.
1099
1100 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
1101
1102         * config/tc-arm.c (md_apply_fix): Generate more accurate
1103         diagnostic when 8-bit immediate range is exceeded for
1104         BFD_RELOC_ARM_OFFSET_IMM8.
1105
1106 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
1107
1108         PR gas/4460
1109         * config/tc-i386.c (lex_got): Don't replace the reloc token with
1110         a space if we already have a space.
1111
1112 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
1113
1114         * config/tc-i386.c (match_template): Don't explicitly check
1115         suffix for crc32 in Intel mode.
1116         (process_suffix): Issue an error for crc32 if the operand size
1117         is ambiguous.
1118
1119 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
1120             Nick Clifton  <nickc@redhat.com>
1121
1122         PR gas/3041
1123         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
1124         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
1125         (md_apply_fix): Put zero values into the frags referencing weak
1126         symbols.
1127
1128 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
1129
1130         PR 4448
1131         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
1132         PPC_OPERAND_PLUS1.
1133
1134 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
1135
1136         * config/tc-i386.c (match_template): Check suffix for crc32 in
1137         Intel mdoe.
1138         (process_suffix): Default the suffix of 8bit crc32 to
1139         BYTE_MNEM_SUFFIX.
1140         (check_byte_reg): Skip check for 8bit crc32.
1141
1142 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
1143
1144         * config/tc-i386.c (md_assemble): Use register_prefix in
1145         error/warning message.
1146         (check_byte_reg): Likewise.
1147         (check_long_reg): Likewise.
1148         (check_qword_reg): Likewise.
1149         (check_word_reg): Likewise.
1150         (process_operands): Likewise.
1151
1152 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
1153
1154         PR 4436
1155         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
1156         min > max.
1157
1158 2007-04-28  Thiemo Seufer  <ths@networkno.de>
1159
1160         * config/tc-mips.c: Fix comment.
1161
1162 2007-04-26  Anatoly Sokolov <aesok@post.ru>
1163
1164         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
1165         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
1166         * doc/c-avr.texi: Document new devices.
1167
1168 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
1169
1170         * Makefile.am: Run "make dep-am".
1171         * Makefile.in: Regenerate.
1172
1173 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
1174
1175         * config/tc-m68k.c (mcf54455_ctrl): New.
1176         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
1177         (m68k_archs): Add isac.
1178         (m68k_cpus): Add 54455 family.
1179         (m68k_ip): Split Bg into Bb, Bs, Bg.
1180         (m68k_elf_final_processing): Add ISA_C.
1181         * doc/c-m68k.texi (M680x0 Options): Add isac.
1182
1183 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
1184
1185         * read.c (read_a_source_file): Skip multiple spaces to
1186         cover hack in mmix md_start_line_hook which overwrites a
1187         colon with a space.  Delete sermon and needless assertion.
1188
1189 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1190
1191         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
1192         (md_atof): Make number_of_chars unsigned.  Revert last change.
1193         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
1194         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
1195         * config/tc-sh.h (md_optimize_expr): Likewise.
1196         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
1197         assertion.
1198         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
1199
1200 2007-04-21  Nick Clifton  <nickc@redhat.com>
1201
1202         * config/atof-vax.c (md_atof): Fix comparison inside know().
1203
1204         * config/tc-ia64.c (emit_one_bundle): Fix typo.
1205
1206 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
1207
1208         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
1209         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
1210         Don't skip over NUL char.
1211         (pseudo_set): Set X_op for registers to O_register.
1212         * symbols.c (symbol_clone): Remove assertion that sym is defined.
1213         (resolve_symbol_value): Resolve O_register symbols.
1214         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
1215         Instead find st(0) by hash lookup.
1216         * config/tc-ppc.c (ppc_macro): Warning fix.
1217
1218         * as.h (ENABLE_CHECKING): Default define to 0.
1219         (know): Assert if ENABLE_CHECKING.
1220         (struct relax_type): Remove superfluous declaration.
1221         * configure.in (--enable-checking): New.
1222         * configure: Regenerate.
1223         * config.in: Regenerate.
1224         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
1225         Check for duplicate powerpc_operands entries.
1226
1227 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
1228
1229         * config/tc-m68k.c (mcf5253_ctrl): New.
1230         (mcf52223_ctrl): New.
1231         (m68k_cpus): Add 5253, 52221, 52223.
1232
1233         * config/m68k-parse.h (RAMBAR_ALT): New.
1234         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1235         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1236         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1237         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1238         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1239         RAMBAR1.
1240         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1241         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1242         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
1243         to control register mapping.
1244
1245 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1246
1247         * messages.c (as_internal_value_out_of_range): Fix typo in
1248         error message.  Return after printing domain error.
1249         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1250         in max when shifting right.
1251
1252 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
1253
1254         * messages.c (as_internal_value_out_of_range): Extend to report
1255         errors for values with invalid low bits set.
1256         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1257         fields.  Check that operands and opcode fields are disjoint.
1258         (ppc_insert_operand): Check operands using mask rather than bit
1259         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
1260         insertion code.
1261         (md_apply_fix): Adjust for struct powerpc_operand change.
1262
1263 2007-04-19  Paul Brook  <paul@codesourcery.com>
1264
1265         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1266         Thumb-1.  Add sanity check for bogus relaxations.
1267
1268 2007-04-19  Paul Brook  <paul@codesourcery.com>
1269
1270         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1271
1272 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
1273
1274         * Makefile.am: Run "make dep-am".
1275         * Makefile.in: Regenerate.
1276
1277 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
1278
1279         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1280
1281 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1282
1283         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1284
1285 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1286
1287         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1288         (match_template): Handle operand size for crc32 in SSE4.2.
1289         (process_suffix): Handle operand type for crc32 in SSE4.2.
1290         (output_insn): Support SSE4.2.
1291
1292 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
1293
1294         * config/tc-i386.c (cpu_arch): Add .sse4.1.
1295         (process_operands): Adjust implicit operand for blendvpd,
1296         blendvps and pblendvb in SSE4.1.
1297         (output_insn): Support SSE4.1.
1298
1299 2007-04-18  Paul Brook  <paul@codesourcery.com>
1300
1301         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1302
1303 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1304
1305         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
1306         of as_warn_where for misaligned data.
1307
1308 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1309
1310         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1311         rs_fill frags.
1312
1313 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
1314
1315         * Makefile.am: Add ACLOCAL_AMFLAGS.
1316         * Makefile.in: Regenerate.
1317
1318 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
1319
1320         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1321         (sh_optimize_expr): Likewise.
1322         * config/tc-sh.h (md_optimize_expr): Define.
1323         (sh_optimize_expr): Prototype.
1324
1325 2007-04-06  Matt Thomas  <matt@netbsd.org>
1326
1327         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1328         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
1329         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
1330
1331 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
1332
1333         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1334
1335 2007-04-04  Paul Brook  <paul@codesourcery.com>
1336
1337         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1338         (insns): Use I15 for vext.
1339
1340 2007-04-04  Paul Brook  <paul@codesourcery.com>
1341
1342         * configure.tgt: Loosen checks for arm uclinux eabi targets.
1343
1344 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
1345
1346         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1347         outputting_stabs_line_debug.
1348
1349 2007-03-26  Anatoly Sokolov <aesok@post.ru>
1350
1351         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1352         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1353         devices.
1354         * doc/c-avr.texi: Document new devices.
1355
1356 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
1357
1358         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1359         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1360         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1361
1362 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
1363             Bob Wilson  <bob.wilson@acm.org>
1364
1365         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1366         Do not check is_loop_target flag.
1367         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1368         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
1369         xtensa_move_labels for alignment of loop opcodes.
1370
1371 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
1372
1373         * config/tc-i386.c (process_suffix): Reindent a bit.
1374
1375 2007-03-30  Paul Brook  <paul@codesourcery.com>
1376
1377         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1378         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
1379         (do_t_push_pop):  Use encode_thumb2_ldmstm.
1380
1381 2007-03-29  DJ Delorie  <dj@redhat.com>
1382
1383         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1384         (md_relax_table): Add entries for ADJNZ macros.
1385         (M32C_Macros): Add ADJNZ macros.
1386         (subtype_mappings): Add entries for ADJNZ macros.
1387         (insn_to_subtype): Check for adjnz and sbjnz insns.
1388         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1389         (md_convert_frag): Convert adjnz and sbjnz.
1390
1391 2007-03-29  Nick Clifton  <nickc@redhat.com>
1392
1393         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1394         initialization.
1395         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1396         using ITBL_NUMBER_OF_PROCESSORS.
1397         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1398
1399 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
1400
1401         * config/tc-i386.c (build_modrm_byte): For instructions with 2
1402         register operands, encode destination in i.rm.regmem if its
1403         RegMem bit is set.
1404
1405 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
1406             Phil Edwards  <phil@codesourcery.com>
1407
1408         * doc/as.texinfo: Put the contents after the title page rather
1409         than at the end of the document.
1410
1411 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
1412
1413         * NEWS: Mention ".reloc".
1414
1415 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
1416
1417         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1418         in FLIX instructions.
1419
1420 2007-03-26  Julian Brown  <julian@codesourcery.com>
1421
1422         * config/tc-arm.c (arm_it): Add immisfloat field.
1423         (parse_qfloat_immediate): Disallow integer syntax for floating-point
1424         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1425         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1426         float.
1427         (neon_cmode_for_move_imm): Reject non-float immediates for float
1428         operands.
1429         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1430
1431 2007-03-26  Julian Brown  <julian@codesourcery.com>
1432
1433         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1434
1435 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
1436
1437         * doc/as.texinfo (Reloc): Document.
1438         * read.c (potable): Add "reloc".
1439         (s_reloc): New function.
1440         * write.c (reloc_list): New global var.
1441         (resolve_reloc_expr_symbols): New function.
1442         (write_object_file): Call it.
1443         (write_relocs): Process reloc_list.
1444         * write.h (struct reloc_list): New.
1445         (reloc_list): Declare.
1446
1447 2007-03-24  Paul Brook  <paul@codesourcery.com>
1448
1449         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1450
1451 2007-03-24  Paul Brook  <paul@codesourcery.com>
1452         Mark Shinwell  <shinwell@codesourcery.com>
1453
1454         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1455         (parse_operands): Don't expect comma if first operand missing.
1456         Handle OP_oRRw.
1457         (do_srs): Encode register number, checking it is r13.  Update comment.
1458         (insns): Update SRS entries to take a register.
1459
1460 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
1461
1462         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1463
1464 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
1465
1466         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1467         attempt to jump to the next instruction into NOPs.
1468
1469 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
1470
1471         * config/tc-spu.c: Don't include opcode/spu.h.
1472         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1473         (md_apply_fix): Adjust.
1474         * config/tc-spu.h: Include opcode/spu.h.
1475         (struct tc_fix_info): New.
1476         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1477         (TC_FORCE_RELOCATION): Define.
1478
1479 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
1480
1481         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1482
1483 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1484
1485         * config/tc-i386.c (process_suffix): Check 0x90 instead of
1486         xchg for xchg %rax,%rax.
1487
1488 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1489
1490         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1491         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1492
1493 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1494
1495         PR binutils/4218
1496         * config/tc-i386.c (match_template): Properly handle 64bit mode
1497         "xchg %eax, %eax".
1498
1499 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
1500
1501         PR gas/4124
1502         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1503
1504 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
1505
1506         * Makefile.am: Run dep-am.
1507         * Makefile.in: Regenerated.
1508
1509         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1510
1511         * config/tc-i386.h: Include "opcodes/i386-opc.h".
1512         (NOP_OPCODE): Removed.
1513         (template): Likewise.
1514
1515 2007-03-21  Andreas Schwab  <schwab@suse.de>
1516
1517         * config/tc-i386.h (NOP_OPCODE): Restore.
1518
1519 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
1520
1521         * config/tc-arm.c (do_mul): Don't warn about overlapping
1522         Rd and Rm operands when assembling for v6 or above.
1523         Correctly capitalize register names in the messages.
1524         (do_mlas): Likewise.  Delete spurious blank line.
1525
1526 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
1527
1528         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1529
1530 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1531
1532         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1533         i386_regtab.
1534         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1535         on i386_regtab.
1536
1537 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
1538
1539         PR gas/4184
1540         * app.c (do_scrub_chars): PUT after setting states.
1541
1542 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1543
1544         * Makefile.am: Run "make dep-am".
1545         * Makefile.in: Regenerated.
1546
1547         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1548         "opcode/i386.h".
1549         (md_begin): Check reg_name != NULL for the last entry in
1550         i386_regtab.
1551
1552         * config/tc-i386.h: Move many entries to opcode/i386.h and
1553         opcodes/i386-opc.h.
1554
1555         * configure.in (need_opcodes): Set true for i386.
1556         * configure: Regenerated.
1557
1558 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
1559
1560         * Makefile.am (REPORT_BUGS_TO): Removed.
1561         (INCLUDES): Remove -DREPORT_BUGS_TO.
1562         * Makefile.in: Regenerated.
1563
1564         * configure.in (--with-bugurl): Removed.
1565         * configure: Regenerated.
1566
1567         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1568         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1569         (TEXI2DVI): Likewise.
1570         (gasver.texi): Removed.
1571         (MOSTLYCLEANFILES): Remove gasver.texi.
1572         (as.1): Don't depend on gasver.texi.
1573         * doc/Makefile.in: Regenerated.
1574
1575         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1576
1577 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
1578
1579         * config/tc-arm.c (arm_copy_symbol_attributes): New.
1580         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1581         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1582         * gas/symbols.c (copy_symbol_attributes): Use
1583         TC_COPY_SYMBOL_ATTRIBUTES.
1584
1585 2007-03-14  Paul Brook  <paul@codesourcery.com>
1586
1587         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1588
1589 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
1590
1591         PR 4029
1592         * write.c (relax_segment): Insert extra alignment padding
1593         to break infinite relax loop when given impossible
1594         gcc_except_table assembly.
1595
1596 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
1597
1598         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1599         on i.tm.base_opcode.
1600         (match_template): Likewise.
1601         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1602
1603         * config/tc-i386.h (Opcode_D): New.
1604         (Opcode_FloatR): Likewise.
1605         (Opcode_FloatD): Likewise.
1606         (D): Redefined.
1607         (W): Likewise.
1608         (FloatMF): Likewise.
1609         (FloatR): Likewise.
1610         (FloatD): Likewise.
1611
1612 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1613
1614         * app.c (do_scrub_chars): Recognize comments after # line "file".
1615         * read.c (get_linefile_number): New.
1616         (s_app_line): Accept ill-formed .linefile lines as comments.
1617
1618 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
1619
1620         * config/tc-i386.h (WORKING_DOT_WORD): Define.
1621
1622 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
1623
1624         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1625         * as.h (new_logical_line_flags): New.
1626         * input-scrub.c (new_logical_line): Turned into wrapper for...
1627         (new_logical_line_flags): this.  Handle flags.
1628         * read.c (potable): Add linefile.  Adjust appline argument.
1629         (s_app_file): Fake .appfiles no more.
1630         (s_app_line): For .linefile, accept file name and flags.
1631
1632 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1633
1634         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1635
1636 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
1637
1638         * Makefile.am: Run "make dep-am".
1639         * Makefile.in: Regenerate.
1640         * po/POTFILES.in: Regenerate.
1641
1642 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
1643
1644         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1645         bug-reporting URL.
1646         * doc/Makefile.am (gasver.texi): Define BUGURL.
1647         * doc/as.texinfo: Use BUGURL.
1648         * Makefile.in, configure, doc/Makefile.in: Regenerate.
1649
1650 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
1651
1652         * config/tc-s390.c (md_parse_option): z9-ec option added.
1653
1654 2007-03-02  Paul Brook  <paul@codesourcery.com>
1655
1656         * config/tc-arm.c (relax_immediate): Always return positive values.
1657         (relaxed_symbol_addr): New function.
1658         (relax_adr, relax_branch): Use it.
1659         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
1660
1661 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
1662
1663         * as.c (parse_args): Update copyright date.
1664
1665 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
1666
1667         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1668
1669 2007-02-28  Nick Clifton  <nickc@redhat.com>
1670
1671         PR gas/3797
1672         * config/tc-d10v.c (do_assemble): Do not generate error messages,
1673         just return -1 whenever a problem is encountered.
1674         (md_assemble): If do_assemble returns -1 generate a non-fatal
1675         error message and return.
1676
1677         PR gas/2623
1678         * config/tc-msp430.c (line_separator_char): Change to '{'.
1679
1680 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1681
1682         * config/tc-m68hc11.c (fixup24): Correct fixup size.
1683         (build_jump_insn): Likewise.
1684         (build_insn): Likewise.
1685         (s_m68hc11_relax): Likewise.
1686
1687 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
1688
1689         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1690
1691 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
1692
1693         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1694
1695 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
1696
1697         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1698         (md_assemble): Likewise.
1699
1700 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
1701
1702         * write.c (size_seg): Always clear SEC_RELOC here.
1703         (install_reloc): New function, extracted from..
1704         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
1705         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
1706         testing frag size.  Set SEC_RELOC here.
1707
1708 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
1709
1710         PR 4082
1711         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1712
1713 2007-02-20  Thiemo Seufer  <ths@mips.com>
1714
1715         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1716
1717 2007-02-20  Thiemo Seufer  <ths@mips.com>
1718
1719         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1720
1721 2007-02-20  Thiemo Seufer  <ths@mips.com>
1722             Chao-Ying Fu  <fu@mips.com>
1723
1724         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1725         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1726         (macro_build): Add case '2'.
1727         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1728         (validate_mips_insn): Add support for balign instruction.
1729         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1730         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1731         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1732         command line options.
1733         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1734         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1735         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1736         .set dspr2, .set nodspr2.
1737
1738 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
1739
1740         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1741         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1742
1743 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
1744
1745         * write.c (TC_FX_SIZE_SLACK): Define.
1746         (write_relocs): Reinstate check for fixup within frag.
1747         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1748         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1749         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1750         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1751         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1752
1753 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
1754             Nathan Sidwell  <nathan@codesourcery.com>
1755             Vladimir Prus  <vladimir@codesourcery.com
1756             Joseph Myers  <joseph@codesourcery.com>
1757
1758         * configure.in (--with-bugurl): New option.
1759         * configure: Regenerate.
1760         * dep-in.sed: Remove bin-bugs.h.
1761         * Makefile.am (REPORT_BUGS_TO): Define.
1762         (INCLUDES): Define REPORT_BUGS_TO.
1763         (DEP_INCLUDES): Likewise.
1764         ($(OBJS)): No longer depend on bin-bugs.h.
1765         * Makefile.in: Regenerate.
1766         * doc/Makefile.in: Regenerate.
1767         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1768         * as.h: Remove include of bin-bugs.h.
1769
1770 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
1771
1772         * write.c: White space fixes.
1773         (fixup_segment): Move symbol_mri_common_p adjustments..
1774         (write_relocs): ..and symbol_equated_reloc_p adjustments..
1775         (adjust_reloc_syms): ..to here.
1776
1777 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
1778
1779         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1780         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
1781         (subseg_set_rest): Remove unnecessary cast.
1782         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
1783         Remove unnecessary forward declarations and casts.
1784         (set_symtab): Delete extern bfd_alloc.
1785         (fixup_segment): Move.
1786
1787 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
1788
1789         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1790         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1791         (mcf5475_ctrl, mcf5485_ctrl): New.
1792         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1793         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1794         (init_table): Add asid, mmubar, adjust rombar0.
1795
1796 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
1797
1798         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1799         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1800         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1801         code, and test for these insns using a combination of
1802         opcode_modifier and operand_types.
1803
1804 2007-02-07  Paul Brook  <paul@codesourcery.com>
1805
1806         * configure.tgt: Add arm*-*-uclinux-*eabi.
1807
1808 2007-02-05  Dave Brolley  <brolley@redhat.com>
1809             Richard Sandiford  <rsandifo@redhat.com>
1810             DJ Delorie  <dj@redhat.com>
1811             Stan Cox  <scox@redhat.com>
1812             Jim Blandy  <jimb@redhat.com>
1813             Nick Clifton  <nickc@redhat.com>
1814             Jim Wilson  <wilson@redhat.com>
1815             Frank Ch. Eigler  <fche@redhat.com>
1816             Graydon Hoare  <graydon@redhat.com>
1817             Ben Elliston  <bje@redhat.com>
1818             John Healy  <jhealy@redhat.com>
1819             Richard Henderson  <rth@redhat.com>
1820
1821         * Makefile.am (CPU_TYPES): Add mep.
1822         (TARGET_CPU_CFILES): Add tc-mep.c.
1823         (TARGET_CPU_HFILES): Add tc-mep.h.
1824         (DEPTC_mep_elf): New variable.
1825         (DEPTC_mep_coff): Likewise.
1826         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1827         * configure.in: Support mep.
1828         * configure.tgt: Likewise.
1829         * config/tc-mep.c: New file.
1830         * config/obj-elf.c: New file.
1831         * config/tc-mep.c: New file.
1832         * config/tc-mep.h: New file.
1833         * testsuite/gas/mep: New testsuite with content.
1834         * Makefile.in: Regenerate.
1835         * configure: Regenerate.
1836
1837 2007-02-05  Dave Brolley  <brolley@redhat.com>
1838
1839         * cgen.c (gas_cgen_install_complex_reloc): Removed.
1840         (complex_reloc_installation_howto): Removed.
1841
1842 2007-02-05  Dave Brolley  <brolley@redhat.com>
1843             Graydon Hoare  <graydon@redhat.com>
1844             DJ Delorie  <dj@redhat.com>
1845             Catherine Moore  <clm@redhat.com>
1846             Michael Chastain  <chastain@redhat.com>
1847             Frank Ch. Eigler  <fche@redhat.com>
1848
1849         * symbols.c (use_complex_relocs_for): New, to decide
1850         when to use complex relocs. Add signed RELC support.
1851         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1852         encode expression symbols as mangled complex relocation symbols (when
1853         compiled with -DOBJ_COMPLEX_RELOC).
1854         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1855         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
1856         encode_addend with new args. Modify to get start, length from
1857         ifield whenever it is set. Also change condition on which
1858         self-describing relocs are encoded. Add hook into
1859         gas_cgen_encode_addend.
1860         (queue_fixup_recursively): Add signed RELC support. Change from masked
1861         expr to trunc flag. Restore assignment of sub-field value to
1862         temporary in fixups array. Reflect changed meaning of last arg to
1863         queue_fixup_recursively.
1864         (fixup): Add cgen_maybe_multi_ifield member.
1865         (make_right_shifted_expr): New function.
1866         (queue_fixup): Change to recursive function that fragments
1867         fixups if operand has a multi-ifield.
1868         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1869         symbols, call weak_operand_overflow_check, and fragment call
1870         queue_fixup with operand fields.
1871         (gas_cgen_finish_insn) Modify to manage ifield pointer.
1872         (weak_operand_overflow_check): New function to try to select
1873         insns correctly.
1874         (gas_cgen_encode_addend): New function for relc.
1875         (gas_cgen_install_complex_reloc): Likewise.
1876         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1877         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1878         cgen_maybe_multi_ifield field to fx_cgen substructure.
1879         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1880         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1881
1882 2007-02-03  DJ Delorie  <dj@delorie.com>
1883
1884         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
1885         byte relocs.
1886         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1887         (m32c_cons_fix_new): Prototype.
1888
1889 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1890
1891         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1892         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1893
1894 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1895
1896         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1897         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1898         (map_suffix_reloc_to_operator): New.
1899         (map_operator_to_reloc): New.
1900         (expression_maybe_register): Fix incorrect test of return value from
1901         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
1902         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1903
1904 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1905
1906         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1907         (tinsn_get_tok): Delete prototype.
1908         * config/tc-xtensa.c (tinsn_get_tok): Delete.
1909
1910 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1911
1912         * config/xtensa-relax.h (struct build_instr): Delete id field.
1913         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1914         and LABEL tokens.
1915         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1916         set op_data fields to zero.
1917         (parse_id_constant): Delete.
1918         (build_transition): Remove code to handle numbered literals and labels.
1919
1920 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
1921
1922         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1923         (build_transition_table): Likewise.
1924
1925 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
1926
1927         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1928         fx_tcbit.
1929         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1930
1931 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
1932
1933         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1934         (struct fix <fx_plt>): Rename to tcbit2.
1935         * write.c (fix_new_internal): Adjust.
1936         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1937         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1938         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1939         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1940         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1941         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1942         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1943         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1944         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1945         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1946         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1947         Instead, compare fx_r_type.
1948         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1949         fx_tcbit in place of fx_plt.
1950         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1951         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1952         to fx_plt.
1953
1954 2007-01-30  Nick Clifton  <nickc@redhat.com>
1955
1956         * as.c (main): Mark symbols created via the --defsym command line
1957         option as volatile so that they can be overridden later on by a
1958         .set directive.  This maintains compatibility with the behaviour
1959         of earlier versions of the assembler.
1960         * doc/as.texinfo (--defsym): Document that the defined symbol's
1961         value can be overridden via a .set directive.
1962
1963 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
1964
1965         * config/tc-i386.c (swap_imm_operands): Renamed to ...
1966         (swap_2_operands): This.  Take 2 ints.
1967         (md_assemble): Updated.
1968         (swap_operands): Call swap_2_operands to swap 2 operands.
1969
1970 2007-01-24  DJ Delorie  <dj@redhat.com>
1971
1972         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1973
1974 2007-01-22  Nick Clifton  <nickc@redhat.com>
1975
1976         PR gas/3871
1977         * tc-score.c: Remove unnecessary uses of _().
1978         Make the err_msg[] a file level local array in order to save
1979         storage space.
1980         Remove unnecessary sprintf()s.
1981
1982 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
1983
1984         PR gas/3871
1985         * config/tc-score.c : Using _() for const string.
1986         Do not assign inst.error with a local string pointer.
1987         (md_section_align): Pad section.
1988
1989 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1990
1991         * config/tc-i386.c (build_modrm_byte): Check number of operands
1992         when procssing memory/register operand.
1993
1994 2007-01-12  Nick Clifton  <nickc@redhat.com>
1995
1996         PR gas/3856
1997         * macro.c (expand_irp): Do not ignore spaces inside quoted
1998         strings.
1999
2000 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2001
2002         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2003         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2004         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
2005         (TC_FORCE_RELOCATION): Define.
2006         (TC_FORCE_RELOCATION_LOCAL): Define.
2007         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
2008
2009 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
2010
2011         * input-file.c (input_file_open): Check fgets return.
2012
2013 2007-01-11  Paul Brook  <paul@codesourcery.com>
2014
2015         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
2016
2017 2007-01-11  Nick Clifton  <nickc@redhat.com>
2018
2019         PR gas/3707
2020         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
2021         variable.
2022
2023         * config/tc-mcore.c (md_number_to_chars): Use
2024         number_to_chars_{big|little}endian.
2025
2026 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
2027
2028         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
2029         architecture by itself.
2030         (m68k_ip): Don't issue a warning for tbl instructions on fido.
2031         (m68k_elf_final_processing): Treat Fido as an architecture by
2032         itself.
2033
2034 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
2035
2036         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
2037
2038 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
2039
2040         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
2041         depending on allow_naked_reg.
2042
2043 2007-01-04  Paul Brook  <paul@codesourcery.com>
2044
2045         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
2046
2047 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
2048
2049         PR gas/3830
2050         * config/tc-i386.c (register_prefix): New.
2051         (set_intel_syntax): Set set_intel_syntax to "" if register
2052         prefix isn't needed.
2053         (check_byte_reg): Use register_prefix for error message.
2054         (check_long_reg): Likewise.
2055         (check_qword_reg): Likewise.
2056         (check_word_reg): Likewise.
2057
2058 2007-01-04  Julian Brown  <julian@codesourcery.com>
2059
2060         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
2061         (do_neon_qshl_imm): Likewise.
2062         (do_neon_rshl): New function. Handle rounding variants of
2063         v{q}shl-by-register.
2064         (insns): Use do_neon_rshl for vrshl, vqrshl.
2065
2066 2007-01-04  Paul Brook  <paul@codesourcery.com>
2067
2068         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
2069         and vacle.
2070
2071 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2072
2073         * config/tc-i386.c (swap_operands): Remove branches.
2074
2075 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2076
2077         * config/tc-i386.c: Update copyright year.
2078         * config/tc-i386.h: Likewise.
2079
2080 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2081
2082         * config/tc-i386.c (smallest_imm_type): Return unsigned int
2083         instead of int.
2084
2085 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
2086
2087         * config/tc-i386.c: Convert to ISO C90 formatting
2088         * config/tc-i386.h: Likewise.
2089
2090 2007-01-03  David Daney  <ddaney@avtrex.com>
2091
2092         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
2093         documentation.
2094
2095 For older changes see ChangeLog-2006
2096 \f
2097 Local Variables:
2098 mode: change-log
2099 left-margin: 8
2100 fill-column: 74
2101 version-control: never
2102 End: