1 2014-08-26 Jiong Wang <jiong.wang@arm.com>
3 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
4 based on the info we got during parsing.
5 (arm_handle_align): Make sure the p2align expanding logic under thumb
8 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
10 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
12 <M_SAAD_AB>: ... here. Assert that !microMIPS.
14 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
16 * config/tc-moxie.h (md_convert_frag): Silence warning.
18 2014-08-22 Richard Henderson <rth@redhat.com>
20 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
21 register number for vector register types.
22 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
23 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
25 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
27 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
28 flag if both the processor and opcode flags match.
30 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
32 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
34 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
36 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
37 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
38 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
40 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
42 * config/tc-arm.c (parse_ifimm_zero): New function.
43 (enum operand_parse_code): Add OP_RSVD_FI0 value.
44 (parse_operands): Handle OP_RSVD_FI0.
45 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
47 2014-08-20 Alan Modra <amodra@gmail.com>
49 * Makefile.am: Typo fix.
50 * Makefile.in: Regenerate.
51 * po/POTFILES.in: Regenerate.
53 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
55 * Makefile.am: Add FreeBSD ARM support.
56 * Mafefile.in: Regenerate.
57 * configure.tgt: Add FreeBSD ARM support.
58 * config/te-armfbsdeabi.h: New file.
59 * config/te-armfbsdvfp.h: Likewise.
61 2014-08-19 Alan Modra <amodra@gmail.com>
63 * configure: Regenerate.
65 2014-08-18 Nick Clifton <nickc@redhat.com>
67 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
68 RELOC_RL78_DIFF fixups.
70 2014-08-18 Alan Modra <amodra@gmail.com>
72 * read.c (parse_mri_cons): Warning fix.
74 2014-08-14 Alan Modra <amodra@gmail.com>
76 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
77 * config.in: Regenerate.
78 * configure: Regenerate.
80 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
82 * config/tc-i386.c (omit_lock_prefix): New.
83 (output_insn): Omit lock prefix if omit_lock_prefix is true.
84 (OPTION_omit_lock_prefix): New.
85 (md_longopts): Add momit-lock-prefix.
86 (md_parse_option): Handle momit-lock-prefix.
87 (md_show_usage): Add momit-lock-prefix=[no|yes].
88 * doc/c-i386.texi (momit-lock-prefix): Document.
90 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
93 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
96 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
98 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
99 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
101 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
103 * config/tc-mips.c (mips_flags_frag): New static global.
104 (struct mips_set_options): Add oddspreg field.
105 (file_mips_opts, mips_opts): Initialize oddspreg.
106 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
108 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
109 and -mno-odd-spreg options.
110 (md_begin): Create .MIPS.abiflags section.
111 (fpabi_incompatible_with, fpabi_requires): New static function.
112 (check_fpabi): Likewise.
113 (mips_check_options): Handle fp=xx and oddspreg restrictions.
114 (file_mips_check_options): Set oddspreg by default for fp=xx.
115 (mips_oddfpreg_ok): Re-write function.
116 (check_regno): Check odd numbered registers regardless of FPR size.
117 For fp != 32 use as_bad instead of as_warn.
118 (match_float_constant): Rewrite check regarding FP register width. Add
119 support for generating constants when MXHC1 is present. Handle fp=xx
120 to comply with the ABI.
121 (macro): Update M_LI_DD similarly to match_float_constant. Generate
122 MTHC1 when available. Check that correct code can be generated for
123 fp=xx and fp=64 ABIs.
124 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
126 (mips_convert_ase_flags): New static function.
127 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
128 to determine when to add the EF_MIPS_FP64 flag. Populate the
129 .MIPS.abiflags section.
130 (md_mips_end): Update .gnu_attribute based on command line and .module
131 as applicable. Use check_fpabi to ensure .gnu.attribute and command
132 line/.module options are consistent.
133 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
134 -mfpxx, -modd-spreg and -mno-odd-spreg options.
135 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
136 gnu_attribute values and FP ABIs.
138 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
140 Add RTEMS target support and simplify matching
142 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
143 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
145 2014-07-27 Anthony Green <green@moxielogic.com>
147 * configure.tgt (generic_target): Add moxie-*-moxiebox*
148 * config/tc-moxie.c: Remove moxie_target_format.
149 (md_begin): Set default target_big_endian.
150 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
151 (TARGET_FORMAT): Set based on target_big_endian.
153 2014-07-26 Alan Modra <amodra@gmail.com>
155 * config/bfin-parse.y: Don't include obstack.h.
156 * config/obj-aout.c: Likewise.
157 * config/obj-coff.c: Likewise.
158 * config/obj-som.c: Likewise.
159 * config/tc-bfin.c: Likewise.
160 * config/tc-i960.c: Likewise.
161 * config/tc-rl78.c: Likewise.
162 * config/tc-rx.c: Likewise.
163 * config/tc-tic4x.c: Likewise.
165 * listing.c: Likewise.
166 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
167 * config/tc-aarch64.c (symbol_locate): Likewise.
168 * config/tc-arm.c (symbol_locate): Likewise.
169 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
170 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
171 (s3_build_dependency_insn_hsh): Likewise.
172 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
173 (s7_build_dependency_insn_hsh): Likewise.
174 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
175 (frag_new): Make parameter a size_t.
176 (frag_var_init): Make max_chars and var parameters size_t.
177 (frag_var, frag_variant): Likewise.
178 (frag_room): Return a size_t.
179 (frag_align_pattern): Make n_fill parameter a size_t.
180 * frags.h: Update function prototypes.
181 * symbols.c (save_symbol_name): Make name_length a size_t.
183 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
184 Alexander Ivchenko <alexander.ivchenko@intel.com>
185 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
186 Sergey Lega <sergey.s.lega@intel.com>
187 Anna Tikhonova <anna.tikhonova@intel.com>
188 Ilya Tocar <ilya.tocar@intel.com>
189 Andrey Turetskiy <andrey.turetskiy@intel.com>
190 Ilya Verbin <ilya.verbin@intel.com>
191 Kirill Yukhin <kirill.yukhin@intel.com>
192 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
194 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
195 * doc/c-i386.texi: Document avx512dq/.avx512dq.
197 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
198 Alexander Ivchenko <alexander.ivchenko@intel.com>
199 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
200 Sergey Lega <sergey.s.lega@intel.com>
201 Anna Tikhonova <anna.tikhonova@intel.com>
202 Ilya Tocar <ilya.tocar@intel.com>
203 Andrey Turetskiy <andrey.turetskiy@intel.com>
204 Ilya Verbin <ilya.verbin@intel.com>
205 Kirill Yukhin <kirill.yukhin@intel.com>
206 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
208 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
209 * doc/c-i386.texi: Document avx512bw/.avx512bw.
211 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
212 Alexander Ivchenko <alexander.ivchenko@intel.com>
213 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
214 Sergey Lega <sergey.s.lega@intel.com>
215 Anna Tikhonova <anna.tikhonova@intel.com>
216 Ilya Tocar <ilya.tocar@intel.com>
217 Andrey Turetskiy <andrey.turetskiy@intel.com>
218 Ilya Verbin <ilya.verbin@intel.com>
219 Kirill Yukhin <kirill.yukhin@intel.com>
220 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
222 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
223 (build_vex_prefix): Don't abort on VEX.W.
224 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
225 (check_VecOperations): Ditto.
226 * doc/c-i386.texi: Document avx512vl/.avx512vl.
228 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
230 Add or reactivate or1k-*-rtems*
231 * gas/configure.tgt (or1k-*-rtems*): Add.
233 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
235 * config/tc-i386.c (parse_register): Set need_vrex.
237 2014-07-15 Jiong Wang <jiong.wang@arm.com>
239 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
240 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
241 one logic error when checking X_op.
243 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
245 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
246 --pcrel about TAB (DBCCLBR, LONG) conversion.
248 2014-07-12 David Majnemer <david.majnemer@gmail.com>
250 * read.c (assign_symbol): Don't force "set" symbols local for PE.
252 2014-07-08 Jiong Wang <jiong.wang@arm.com>
254 * config/tc-arm.c (literal_pool): New field "alignment".
255 (find_or_make_literal_pool): Initialize "alignment" to 2.
256 (s_ltorg): Align the pool using value of "alignment"
257 (parse_big_immediate): New parameter "in_exp". Return
258 parsed expression if "in_exp" is not null.
259 (parse_address_main): Invoke "parse_big_immediate" for
261 (add_to_lit_pool): Add one parameter 'nbytes'.
262 Split 8 byte entry into two 4 byte entry.
263 Add padding to align 8 byte entry to 8 byte boundary.
264 (encode_arm_cp_address): Generate literal pool entry if possible.
265 (move_or_literal_pool): Generate entry for vldr case.
266 (enum lit_type): New enum type.
267 (do_ldst): Use new enum type.
268 (do_ldstv4): Likewise.
269 (do_t_ldst): Likewise.
270 (neon_write_immbits): Support Thumb-2 mode.
272 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
274 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
275 name as [xyz][hl]. Permit using a symbol whoes name begins with
276 ‘r’ to refer to a register.
277 Allow arbitrary expressions for the P and p operators.
278 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
279 BFD_RELOC_AVR_PORT6 relocations.
281 2014-07-04 Alan Modra <amodra@gmail.com>
283 * doc/internals.texi: Update "configure.in" comments.
284 * acinclude.m4: Likewise.
285 * config/tc-sparc.c: Likewise.
287 2014-07-04 Alan Modra <amodra@gmail.com>
289 * configure.ac: Rename from configure.in.
290 * Makefile.in: Regenerate.
291 * config.in: Regenerate.
292 * doc/Makefile.in: Regenerate.
294 2014-07-04 Alan Modra <amodra@gmail.com>
296 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
297 * doc/Makefile.in: Regenerate.
299 2014-07-04 Alan Modra <amodra@gmail.com>
301 * configure.in: Include bfd/version.m4.
302 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
303 (BFD_VERSION): Delete.
304 * configure.com: Get bfd version from bfd/version.m4.
305 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
306 * configure: Regenerate.
307 * Makefile.in: Regenerate.
308 * doc/Makefile.in: Regenerate.
310 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
311 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
312 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
313 Soundararajan <Sounderarajan.D@atmel.com>
315 * config/tc-avr.c (mcu_types): Add avrtiny arch.
316 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
318 (md_show_usage): Add avrtiny arch in usage message.
319 (avr_operand): validate and issue error for invalid register for
321 add new reloc exp for 16 bit lds/sts instruction.
322 (md_apply_fix): check 16 bit lds/sts operand for out of range and
324 (md_assemble): check ISA for arch and issue diagnostic.
325 * NEWS: Mention new support.
326 * doc/c-avr.texi: Document support for avrtiny architecture.
328 2014-06-27 Alan Modra <amodra@gmail.com>
330 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
331 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
332 (obj_mach_o_frob_label): Avoid cascading errors.
333 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
335 2014-06-18 DJ Delorie <dj@redhat.com>
337 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
340 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
342 * config/tc-mmix.c (loc_assert_s): New member frag.
344 (mmix_md_end): If an error is reported for a LOC expression, patch
347 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
350 * macro.c (buffer_and_nest): Honour #line directives inside
353 2014-06-17 Jiong Wang <jiong.wang@arm.com>
355 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
357 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
359 * config/tc-cris.c (cris_bad): New function.
360 (cris_process_instruction): Where applicable, use it instead of
363 2014-06-16 Nick Clifton <nickc@redhat.com>
365 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
367 2014-06-16 Jiong Wang <jiong.wang@arm.com>
369 * config/tc-aarch64.c (END_OF_INSN): New macro.
370 (parse_operands): Handle operand given and in wrong format when
373 2014-06-16 Alan Modra <amodra@gmail.com>
375 * write.h (subsegs_finish): Delete declaration.
376 * write.c (subsegs_finish): Make static.
377 (write_object_file): Call subsegs_finish from here. Don't print
378 warning and error count here..
379 * as.c (main): ..do so here instead. Remove dead code for "no
380 object file generated". Split out count strings to better support
381 internationalisation. Don't call subsegs_finish. Tidy setting of
382 "keep_it". Run write_object_file even after errors.
383 (keep_it): Make static.
384 * config/obj-elf.c (elf_frob_symbol): Remove assert.
385 (elf_frob_file_before_adjust): Likewise.
387 2014-06-16 Alan Modra <amodra@gmail.com>
389 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
392 2014-06-16 Alan Modra <amodra@gmail.com>
394 * config/tc-i386.c (reloc): Don't avoid pcrel check for
395 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
397 2014-06-16 Alan Modra <amodra@gmail.com>
399 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
400 (tic6x_output_exidx_entry): Likewise.
401 (md_apply_fix): Simplify 1 byte md_number_to_chars.
403 2014-06-16 Alan Modra <amodra@gmail.com>
405 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
406 end of archive to temp file.
407 (tic54x_start_line_hook): Start scan for parallel on next line,
408 not one char into next line (which may overrun the buffer).
410 2014-06-16 Alan Modra <amodra@gmail.com>
412 * config/tc-vax.c (md_apply_fix): Rewrite.
413 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
414 define rather than the equivalent BFD_RELOC_NONE.
416 2014-06-16 Alan Modra <amodra@gmail.com>
418 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
419 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
420 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
422 2014-06-16 Alan Modra <amodra@gmail.com>
424 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
425 with a nop rather than leaving uninitialised.
427 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
429 * config/tc-score7.c: Replace sprintf with strcpy where
431 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
433 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
434 (s3_relax_cmpbranch_inst32): Likewise.
436 2014-06-07 Alan Modra <amodra@gmail.com>
438 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
439 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
442 2014-06-02 Martin Storsjo <martin@martin.st>
444 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
446 2014-06-05 Joel Brobecker <brobecker@adacore.com>
448 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
449 bfd's development.sh.
450 * Makefile.in, configure: Regenerate.
452 2014-06-03 Nick Clifton <nickc@redhat.com>
454 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
455 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
456 * doc/c-msp430.texi: Update command line option description.
458 2014-05-22 Alan Modra <amodra@gmail.com>
460 * listing.c (listing_warning, listing_error): Add space after colon.
461 * messages.c (as_warn_internal, as_bad_internal): Use the same
464 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
466 * config/tc-mips.c (file_mips_opts_checked): New static global.
467 (s_module): New static function.
469 (mips_pseudo_table): Add .module handler.
470 (mips_set_ase): Add opts argument and use instead of mips_opts.
471 (md_assemble): Use file_mips_check_options.
472 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
473 (mips_set_architecture): Delete function. Moved to...
474 (mips_after_parse_args): Here. All logic now applies to
475 file_mips_opts first and then copies the final state to mips_opts.
476 Move error checking and defaults inference to mips_check_options and
477 file_mips_check_options.
478 (mips_check_options): New static function. Common option checking for
479 command line, .module and .set. Use .module values in error messages
480 instead of refering to command line options.
481 (file_mips_check_options): New static function. A wrapper for
482 mips_check_options with file_mips_opts. Updates BFD arch based on
484 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
485 supported by both .set and .module are moved to parse_code_option.
486 Warnings and errors are kept in s_mipsset because when
487 parse_code_option is used with s_module the warnings are deferred
488 until code is generated. Any setting supporting 'default' value is
489 kept in s_mipsset as it is not applicable to s_module. Inferred
490 settings are also kept in s_mipsset as s_module does not infer any
491 settings. Use mips_check_options.
492 (parse_code_option): New static function derived from s_mipsset.
493 (s_module): New static function that implements .module. Allows file
494 level settings to be changed until code is generated.
495 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
496 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
497 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
498 (md_mips_end): Use file_mips_check_options.
499 * doc/c-mips.texi: Document .module.
501 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
503 * messages.c (as_warn_internal): Remove extra whitespace from
506 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
508 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
509 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
511 2014-05-20 Mike Stump <mikestump@comcast.net>
513 * messages.c (as_warn_internal): Ensure we don't interleave output
514 within a single line when make -j is used.
515 (as_bad_internal): Likewise.
517 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
519 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
520 * config/obj-elf.c (recorded_attribute_info): New structure.
521 (recorded_attributes): New variable.
522 (record_attribute, obj_elf_seen_attribute): New functions.
523 (obj_elf_vendor_attribute): Record which attributes have been seen.
525 2014-05-20 Nick Clifton <nickc@redhat.com>
527 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
528 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
529 (msp430_srcoperand): Store vshift value in operand.
531 2014-05-19 Nick Clifton <nickc@redhat.com>
534 * config/tc-i386.c (md_apply_fix): Improve the detection of code
535 symbols for 32-bit PE targets.
537 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
539 * config/tc-mips.c (md_obj_begin): Delete.
540 (md_obj_end): Fold into...
541 (md_mips_end): ...here. Move to end of file.
543 2014-05-17 Nick Clifton <nickc@redhat.com>
546 * config/tc-v850.c (handle_ctoff): Generate an error if called
547 when using the RH850 ABI.
549 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
551 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
552 and OPTION_64BIT_DOUBLES.
553 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
554 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
555 (md_show_usage): Show all of the RL78 options.
556 (rl78_float_cons): New static functions.
557 (md_pseudo_table): Update handler for "double".
558 * doc/c-rl78.texi: Document new options.
559 * doc/as.texinfo: Likewise.
561 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
563 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
564 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
565 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
566 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
568 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
570 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
573 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
575 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
576 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
577 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
578 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
580 (file_mips_opts): Here. New static global. Update throughout.
581 (mips_opts): Update defaults for gp32 and fp.
583 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
585 * config/tc-mips.c (streq): Define.
586 (mips_convert_symbolic_attribute): New function.
587 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
588 (mips_convert_symbolic_attribute): New prototype.
590 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
592 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
595 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
597 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
599 (ISA_HAS_64BIT_FPRS): Likewise.
600 (ISA_HAS_ROR): Likewise.
601 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
602 (ISA_HAS_MXHC1): Likewise.
603 (hilo_interlocks): Likewise.
604 (md_longopts): Likewise.
605 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
606 (ISA_HAS_DROR): Likewise.
607 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
609 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
611 (md_parse_option): Likewise.
612 (s_mipsset): Likewise.
613 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
614 and mips64r5. Also change p5600 entry to be mips32r5.
615 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
617 * configure: Regenerate.
618 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
619 -mips64r5 command line options.
620 * doc/as.texinfo: Likewise.
622 2014-04-28 Nick Clifton <nickc@redhat.com>
625 * config/tc-i386.c (md_apply_fix): Do not adjust value of
626 pc-relative fixes against weak symbols.
628 2014-04-26 Alan Modra <amodra@gmail.com>
630 * po/POTFILES.in: Regenerate.
632 2014-04-24 Nick Clifton <nickc@redhat.com>
634 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
637 2014-04-23 Will Newton <will.newton@linaro.org>
639 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
640 directly instead of mapping_state.
642 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
644 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
645 (md_longopts): Add xpa and no-xpa command line options.
646 (mips_ases): Add MIPS XPA ASE.
647 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
648 * doc/as.texinfo: Document the MIPS XPA command line options.
649 * doc/c-mips.texi: Document the MIPS XPA command line options,
650 and assembler directives.
652 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
654 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
655 unbreak self-test mode.
657 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
659 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
662 2014-04-22 Christian Svensson <blue@cmd.nu>
664 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
665 * configure.in: Likewise.
666 * configure.tgt: Likewise.
667 * doc/as.texinfo: Likewise.
668 * config/obj-coff.h: Likewise.
669 * config/tc-or1k.c: New file.
670 * config/tc-or1k.h: New file.
671 * config/tc-openrisc.c: Delete.
672 * config/tc-openrisc.h: Delete.
673 * config/tc-or32.c: Delete.
674 * config/tc-or32.h: Delete.
675 * Makefile.in: Regenerate.
676 * configure: Regenerate.
678 2014-04-16 Alan Modra <amodra@gmail.com>
680 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
681 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
683 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
685 * config/tc-avr.c: Add new flag mlink-relax.
686 (md_show_usage): Add flag and help text.
687 (md_parse_option): Record whether link relax is turned on.
688 (relaxable_section): New.
689 (avr_validate_fix_sub): New.
690 (avr_force_relocation): New.
691 (md_apply_fix): Generate DIFF reloc.
692 (avr_allow_local_subtract): New.
694 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
695 (TC_FORCE_RELOCATION): Define.
696 (TC_FORCE_RELOCATION_SUB_SAME): Define.
697 (TC_VALIDATE_FIX_SUB): Define.
698 (avr_force_relocation): Declare.
699 (avr_validate_fix_sub): Declare.
700 (md_allow_local_subtract): Define.
701 (avr_allow_local_subtract): Declare.
703 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
705 * config/tc-mips.c (mips_cpu_info_table): Add P5600
707 * doc/c-mips.texi: Document p5600.
709 2014-04-09 Nick Clifton <nickc@redhat.com>
711 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
712 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
713 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
714 * read.c (emit_expr_fix): Mark the r parameter as potentially
717 2014-04-09 Alan Modra <amodra@gmail.com>
719 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
721 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
722 (ppc_elf_cons_fix_check): New function.
723 (md_assemble): Set last_insn, last_seg, last_subseg.
724 (ppc_byte, md_apply_fix): Handle warn_476.
725 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
726 (ppc_elf_cons_fix_check): Declare.
727 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
729 2014-04-09 Alan Modra <amodra@gmail.com>
731 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
732 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
733 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
734 (TC_CONS_FIX_NEW): Add RELOC parameter.
735 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
736 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
737 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
738 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
739 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
740 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
741 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
742 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
743 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
745 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
746 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
747 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
748 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
749 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
750 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
751 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
752 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
753 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
754 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
756 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
757 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
759 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
760 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
761 * gas/config/tc-avr.c (exp_mod_data): Make global.
762 (pexp_mod_data): Delete.
763 (avr_parse_cons_expression): Return exp_mod_data pointer.
764 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
765 (exp_mod_data_t): Move typedef..
766 * gas/config/tc-avr.h: ..to here.
767 (exp_mod_data): Declare.
768 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
769 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
770 (TC_CONS_FIX_NEW): Update.
771 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
772 (cons_fix_new_hppa): Add hppa_field_selector param.
773 (fix_new_hppa): Adjust.
774 (parse_cons_expression_hppa): Return field selector.
775 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
776 (cons_fix_new_hppa): Likewise.
777 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
778 * gas/config/tc-i386.c (got_reloc): Delete static var.
779 (x86_cons_fix_new): Add reloc param.
780 (x86_cons): Return got reloc.
781 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
782 (TC_CONS_FIX_NEW): Add RELOC param.
783 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
785 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
786 (TC_CONS_FIX_NEW): Add reloc param.
787 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
789 (cons_fix_new_microblaze): Add reloc param.
790 * gas/config/tc-microblaze.h: Formatting.
791 (parse_cons_expression_microblaze): Update proto.
792 (cons_fix_new_microblaze): Likewise.
793 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
794 (nios2_cons): Return ldo reloc.
795 (nios2_cons_fix_new): Delete.
796 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
797 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
798 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
799 short. Make llong use cons.
800 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
801 (ppc_elf_cons): Delete.
802 (ppc_elf_parse_cons): New function.
803 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
804 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
805 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
806 (ppc_elf_parse_cons): Declare.
807 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
808 (sparc_cons): Return reloc specifier.
809 (cons_fix_new_sparc): Add reloc specifier param.
810 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
811 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
812 (TC_PARSE_CONS_RETURN_NONE): Define.
813 (sparc_cons, cons_fix_new_sparc): Update prototype.
814 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
815 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
816 (md_assemble): Likewise.
817 (parse_cons_expression_v850): Return reloc.
818 (cons_fix_new_v850): Add reloc parameter.
819 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
820 (cons_fix_new_v850): Likewise.
821 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
822 (vax_cons): Return reloc.
823 (vax_cons_fix_new): Add reloc parameter.
824 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
825 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
826 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
827 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
828 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
829 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
830 (do_parse_cons_expression): Adjust.
831 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
832 to emit_expr_with_reloc.
833 (emit_expr_with_reloc): New function handling reloc, mostly
836 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
838 (parse_mri_cons): Convert to ISO.
839 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
840 (TC_PARSE_CONS_RETURN_NONE): Define.
841 (emit_expr_with_reloc): Declare.
842 (emit_expr_fix): Update prototype.
843 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
845 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
847 * config/tc-i386.c (cpu_arch): Add .se1.
848 * doc/c-i386.texi: Document .se1/se1.
850 2014-04-02 DJ Delorie <dj@redhat.com>
852 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
853 pc-relative branches.
855 2014-04-02 Nick Clifton <nickc@redhat.com>
858 * config/tc-arm.c (create_unwind_entry): Report an error if an
859 attempt to recreate an unwind directive is encountered.
861 2014-03-27 Nick Clifton <nickc@redhat.com>
863 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
864 sprintf in order to avoid a compile time warning.
866 2014-03-26 Nick Clifton <nickc@redhat.com>
868 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
869 relocation is used on an 8-bit operand or vice versa.
870 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
871 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
873 2014-03-25 Nick Clifton <nickc@redhat.com>
875 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
876 switches the current segment back to the code segment recorded
877 when seh_proc was last invoked.
878 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
880 2014-03-25 Alan Modra <amodra@gmail.com>
882 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
883 (md_assemble): Likewise. Warn.
885 2014-03-21 David Weatherford <weath@cadence.com>
886 Max Filippov <jcmvbkbc@gmail.com>
888 * config/tc-xtensa.c (xtensa_check_frag_count)
889 xtensa_create_trampoline_frag,
890 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
891 find_trampoline_seg, search_trampolines, get_best_trampoline,
892 check_and_update_trampolines, add_jump_to_trampoline,
893 dump_trampolines): New functions.
894 (md_parse_option): Add cases for --[no-]trampolines options.
895 (md_assemble, finish_vinsn, xtensa_end): Add call to
896 xtensa_check_frag_count.
897 (xg_assemble_vliw_tokens): Add call to
898 xtensa_maybe_create_trampoline_frag.
899 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
900 (relax_frag_immed): Relax jump instructions that cannot reach its
902 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
904 * doc/as.texinfo: Document --[no-]trampolines command-line options.
905 * doc/c-xtensa.texi: Document trampolines relaxation and command
907 * frags.c (get_frag_count, clear_frag_count): New function.
908 (frag_alloc): Increment totalfrags counter.
909 * frags.h (get_frag_count, clear_frag_count): New function.
911 2014-03-20 DJ Delorie <dj@redhat.com>
913 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
914 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
916 * config/tc-rl78.h (md_relax_frag): Define.
917 (rl78_relax_frag): Declare.
918 * config/tc-rl78.c (rl78_relax): Add.
919 (md_assemble): Set up the variable frags also when relaxing.
921 (rl78_opcode_type): New.
922 (rl78_frag_fix_value): New.
923 (md_estimate_size_before_relax): New-ish.
924 (rl78_relax_frag): New.
925 (md_convert_frag): New-ish.
927 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
929 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
930 * config/tc-mips.c (md_pcrel_from): Remove error message.
931 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
932 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
933 PC-relative expressions. Handle BFD_RELOC_8.
935 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
937 * config/tc-sparc.c (hpriv_reg_table): Added entries for
938 %hstick_offset and %hstick_enable.
939 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
940 %hstick_enable hyperprivileged registers.
942 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
943 Nick Clifton <nickc@redhat.com>
945 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
946 CCS syntax compatibility mode is on or off.
947 (asmfunc_states): New enum to represent the asmfunc directive state.
948 (asmfunc_state): New variable holding the asmfunc directive state.
949 (comment_chars): Rename to arm_comment_chars.
950 (line_separator_chars): Rename to arm_line_separator_chars.
951 (s_ccs_ref): New function that handles the .ref directive.
952 (asmfunc_debug): New function.
953 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
954 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
955 (s_ccs_def): New function that handles the .def directive.
956 (tc_start_label_without_colon): New function.
957 (md_pseudo_table): Added new CCS directives.
958 (arm_ccs_mode): New function that handles the -mccs command line option.
959 (arm_long_opts): Added new -mccs command line option.
960 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
961 (TC_START_LABEL_WITHOUT_COLON): New macro.
962 (tc_start_label_without_colon): Added extern function declaration.
963 (tc_comment_chars): Define.
964 (tc_line_separator_chars): Define.
965 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
966 * read.c (read_begin): Likewise.
967 * doc/as.texinfo: Add documentation for the -mccs command line
969 * doc/c-arm.texi: Likewise.
970 * doc/internals.texi: Document tc_line_separator_chars.
971 * NEWS: Mention the new feature.
973 2014-03-18 Jiong Wang <jiong.wang@arm.com>
975 * config/tc-aarch64.c (aarch64_opts): Add new option
977 (verbose_error_p): Initialize to 1.
978 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
979 and -mno-verbose-error.
981 2014-03-17 Nick Clifton <nickc@redhat.com>
984 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
987 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
988 Jiong Wang <Jiong.Wang@arm.com>
990 * doc/c-aarch64.texi: Clean up some formatting issues.
991 (AArch64 Options): Document -mcpu and -march.
992 (AArch64 Extensions): New node.
994 2014-03-13 Tristan Gingold <gingold@adacore.com>
996 * config/tc-i386.c (use_big_obj): Declare.
997 (OPTION_MBIG_OBJ): Define.
998 (md_longopts): Add -mbig-obj option.
999 (md_parse_option): Handle it.
1000 (md_show_usage): Display help for this option.
1001 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1002 * doc/c-i386.texi: Document the option.
1004 2014-03-12 Nick Clifton <nickc@redhat.com>
1007 * config/tc-aarch64.c (literal_expression): New structure.
1008 (literal_pool): Replace exp array with literal_expression array.
1009 (add_to_lit_pool): When adding a bignum cache the big value.
1010 (s_ltorg): When emitting a bignum initialise the global bignum
1011 array from the cached value.
1013 2014-03-12 Alan Modra <amodra@gmail.com>
1015 * Makefile.in: Regenerate.
1016 * config.in: Regenerate.
1017 * doc/Makefile.in: Regenerate.
1019 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1020 Vishnu KS <Vishnu.k_s@atmel.com>
1021 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1022 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1024 * gas/tc-avr.c: Add new devices
1025 avr25: ata5272, attiny828
1026 avr35: ata5505, attiny1634
1027 avr4: atmega8a, ata6285, ata6286, atmega48pa
1028 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1029 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1031 avr51: atmega128a, atmega1284
1032 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1033 atxmega32e5, atxmega16e5, atxmega8e5
1034 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1035 atxmega64c3, atxmega64d4
1036 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1037 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1038 atxmega256c3, atxmega384c3, atxmega384d3
1039 avrxmega7: atxmega128a4u
1040 * doc/c-avr.texi: Ditto.
1042 2014-03-05 Alan Modra <amodra@gmail.com>
1044 Update copyright years.
1046 2014-03-05 Alan Modra <amodra@gmail.com>
1048 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1049 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1051 2014-03-05 Alan Modra <amodra@gmail.com>
1053 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1054 later. Merge absolute and relative branch reloc selection.
1055 Generate 16-bit relocs for most 16-bit insn fields given a
1056 non-constant expression.
1058 2014-03-05 Alan Modra <amodra@gmail.com>
1060 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1061 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1063 2014-03-04 Heiher <r@hev.cc>
1065 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1068 2014-03-03 Nick Clifton <nickc@redhat.com>
1070 * config/msp430/msp430.c: Replace known mcu array with known
1071 msp430 ISA mcu name array.
1072 Accept any name for -mmcu option.
1073 Add -mz option to warn about missing NOP following an interrupt
1075 (check_for_nop): New.
1076 (msp430_operands): Emit a warning, if requested, when an interrupt
1077 changing instruction is not followed by a NOP.
1078 * doc/c-msp430.c: Document -mz option.
1080 2014-03-03 Alan Modra <amodra@gmail.com>
1082 * config/bfin-lex-wrapper.c: Correct copyright date.
1083 * config/obj-fdpicelf.c: Likewise.
1084 * config/obj-fdpicelf.h: Likewise.
1085 * config/tc-frv.c: Correct copyright punctuation.
1086 * config/tc-ip2k.c: Likewise.
1087 * config/tc-iq2000.c: Likewise.
1088 * config/tc-mep.c: Likewise.
1089 * config/tc-tic4x.c: Likewise.
1090 * config/tc-tic4x.h: Likewise.
1092 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1094 * config/tc-avr.c: Remove atxmega16x1.
1096 2014-02-28 Alan Modra <amodra@gmail.com>
1098 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1099 field for 64-bit dwarf.
1101 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1103 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1104 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1106 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1108 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1109 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1110 clflushopt/.clfushopt.
1112 2014-02-10 Alan Modra <amodra@gmail.com>
1114 * po/POTFILES.in: Regenerate.
1115 * po/gas.pot: Regenerate.
1117 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1119 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1120 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1121 %got_hiadj relocation operators. Sort table and add comment
1122 to explain ordering.
1123 (nios2_fix_adjustable): Test for new relocs.
1124 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1127 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1129 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1130 (nios2_assemble_args_m): Likewise.
1131 (md_assemble): Likewise.
1133 2014-01-24 DJ Delorie <dj@redhat.com>
1135 * config/tc-msp430.c (msp430_section): Always flag data sections,
1137 (msp430_frob_section): New. Make sure all sections are noticed if
1139 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1140 (msp430_comm): New. Likewise.
1141 (md_pseudo_table): Add them.
1142 * config/tc-msp430.h (msp430_frob_section): Declare.
1143 (tc_frob_section): Define.
1145 2014-01-23 Nick Clifton <nickc@redhat.com>
1147 * config/tc-msp430.c (show_mcu_list): Delete.
1148 (md_parse_option): Accept any MCU name. Accept several more
1149 variants for the -mcpu option.
1150 (md_show_usage): Do not call show_mcu_list.
1152 2014-01-22 DJ Delorie <dj@redhat.com>
1154 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1155 * doc/c-msp430.texi (MSP430 Directives): Document it.
1157 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1159 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1162 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1165 * config/tc-i386.c (check_VecOperands): Add check for invalid
1166 register set in AVX512 gathers.
1168 2014-01-22 Alan Modra <amodra@gmail.com>
1170 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1172 2014-01-21 DJ Delorie <dj@redhat.com>
1174 * config/tc-rl78.c (require_end_of_expr): New.
1175 (md_operand): Call it.
1176 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1179 2014-01-17 Will Newton <will.newton@linaro.org>
1181 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1182 for the s32.f64 flavours of VCVT.
1184 2014-01-14 Nick Clifton <nickc@redhat.com>
1187 * config/tc-z80.c (wrong_match): Provide format string to
1189 (parse_exp_not_indexed): Delete unused variable dummy.
1190 (emit_byte): Delete unused variable fixp.
1192 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1194 * config/tc-i386.c (regbnd): Removed.
1195 (vec_disp8): Likewise.
1197 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1199 * as.c (parse_args): Update copyright year to 2014.
1201 2014-01-07 Tom Tromey <tromey@redhat.com>
1203 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1206 2014-01-07 Tom Tromey <tromey@redhat.com>
1208 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1211 2014-01-07 Tom Tromey <tromey@redhat.com>
1213 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1215 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1217 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1219 For older changes see ChangeLog-2013
1221 Copyright (C) 2014 Free Software Foundation, Inc.
1223 Copying and distribution of this file, with or without modification,
1224 are permitted in any medium without royalty provided the copyright
1225 notice and this notice are preserved.
1231 version-control: never