doc/as.texinfo: minor changes for texi2roff-2

[binutils-gdb.git] / gas / ChangeLog

Fri Oct 11 18:18:37 1991  Roland H. Pesch  (pesch at cygnus.com)

        * doc/Makefile: new targets as.info, as.ms
        doc/as.texinfo: minor changes for texi2roff-2
        Makefile.in: revise 'doc' target.       

Fri Jan  4 12:48:22 EST 1991    Jay Fenlason (hack@ai.mit.edu)

        * messages.c  Moved as_perror from input-scrub.c  Modified the
        error messages to look better.

        * output-file.c Don't call as_fatal, just call exit()

        expr.c Slightly improve checking for foo-foo case in
        clean_up_expression().  Detect foo: bar: ... foo-bar...

Tue Dec  4 16:29:20 EST 1990    Jay Fenlason (hack@ai.mit.edu)

        * m68k.c  Fixed an obscure bug involving AOFF mode with a
        large constant displacement (Was forgetting to output the
        extension word.)

        make-gas.com  Added a three line patch from Eric Youngdale that
        makes it possible to submit make-gas.com to a batch queue.

Wed Nov 21 15:07:51 EST 1990    Jay Fenlason (hack@ai.mit.edu)

        * vms.c  (VMS_TBT_Routine_END)  Add a four line patch from
        Eric Youngdale.

Tue Nov 13 14:02:15 EST 1990    Jay Fenlason (hack@ai.mti.edu)

        * vms-dbg.c (VMS_DBG_record())  Another one character patch from
        Eric Youngdale.

Mon Oct 29 15:49:21 EST 1990    Jay Fenlason (hack@ai.mit.edu)

        * read.c  Replace some as_warn calls with as_bad.

Fri Oct 26 15:21:15 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * i386.c, i860.c, ns32k.c       Add const changes.

Mon Oct 22 14:04:26 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * sparc.c       Add const changes.

        * make-gas.com  define const= for VMS, since many older versions of
        GCC don't work correctly with const under VMS.

Thu Oct 18 12:44:11 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * i860.c i860-opcode.h  Added patches from rgb@mcc.com

        * read.c, symbols.c, vms.c, + new_file vms-dbg-module.c
        Added Eric Youngdale's <YOUNGDALE@v6550c.nrl.navy.mil> VMS debugging
        patches, so debugging GCC output now works.

        * hash.c (hash_grow)  Remember to blank out the wall entry in the new
        hash table.  This is important on systems where malloc() returns
        non-zero storage. . .

Tue Oct 16 10:11:35 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * output-file.c (output_file_create)  if output filename is given as
        '-', write to stdout.

        * m68k.c Finally get the PCREL code to work right.  Add relaxation of
        PCREL stuff  This small fix from Ken Woodland
        (kenny%datacube.uucp@uunet.uu.net).

        * m68k.c  Added some const declarations to constants.  (md_relax_table,
        md_pseudo_table, etc. . .)

Thu Oct 11 11:15:10 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * Makefile, read.c, write.c Include the i860 port.
        (New files i860.c i860-opcode.h i860.h)

        * m68k.c Fix some addressing modes, (AOFF, AINDEX, etc) to work in
        PC relative mode.

        * (all over)  Raeburn's const hacking.  This reduces the data-space size by
        declaring many tables, etc, as 'const'.

Mon Oct 22 22:48:22 1990  John Gilmore  (gnu at cygint)

        Make gas work if you turn on the know() checks.

        * app.c:  Only pass a single space through:  the one after
        the opcode.  All other whitespace is removed, to match the
        expectations of the parser in read.c.

        * as.h: Remove obsolete comments.  Remove JF's NDEBUG so
        that know() can really work if you turn it on.  Make
        SEG_MAXIMUM_ORDINAL == SEG_REGISTER.

        * expr.c (operand):  Change BITS_PER_INT to 8*sizeof(int).

        * input-scrub.c:  strlen("\0") doesn't return 1...
        (as_where):  Add space after line number in errors, like gcc.

        * m68k.c (s_bss):  Fake .bss into data section 255.
        We can't cope with a real "BSS section" yet, but we can at
        least do the right thing less efficiently (with lots of
        zeroes).

        * read.c:  Turn lots of as_warn()'s into as_bad()'s.

        * read.h (SKIP_WHITESPACE):  Replace last instance of ASSERT()
        with know().

        * sparc.c (s_seg):  We can't put frags into the BSS segment
        yet, so just fake bss seg as 255th data segment.

        * vax.c:  Remove \'s from continued macro *parameters*.  These
        must have been added after the last time someone turned on
        know() checking...

        * write.c (relax_segment):  Refine what we know() about the
        symbols referenced during relaxation.   

        * Makefile (OTHER_ALIGN):  Remove, handled in tables now.
        Flip options a bit.  These options really ought to go
        elsewhere.

Sun Oct 21 03:57:21 1990  John Gilmore  (gnu at cygint)

        Sun-3 fixes.

        * expr.c, write.c:  Missing semicolon after know().

        * write.c (fixup_segment):  Allow pc-relative accesses to undefined
        external symbols.  Previously this would turn off pc-rel calc
        of displacement, while leaving pc-rel opcode alone, botching.

        * m68k.c (m68k_ip):  Allow pc-relative effective addresses
        for source operands.  "pea" instructions are a good example
        where we can shorten from abs long to pc+16bit.
        (md_convert_frag):  Fix "JBSR" comments to refer to "JSR", the
        actual instruction.  Insert comments about bug in 68000 bcc
        and dbcc long code (that doesn't get exercised much).  Add
        comments about long pcrel displacements for -pic.  Remove
        "this code has not been tested" comment.
        (md_estimate_size_before_relax):  Now that fixup_segment
        doesn't shortcircuit pc-relative fixups for undefined symbols,
        only output them if -pic; else turn them absolute, which is
        slightly faster.  More JBSR->JSR comments.
        (md_parse_options):  Parse -pic.

Fri Oct 19 14:35:20 1990  John Gilmore  (gnu at cygint)

        * Make sparc assembler more compatible with Sun assembler.
        sparc.c:  reformat pseudo-op table to match main table.
        (md_assemble):  Add SPECIAL_CASE_FDIV to assemble FDIV*
        instructions as fdiv followed by fmovs to get around chip bug.
        (s_common, s_seg):  Accept "bss" section name.
        (md_assemble):  Handle "set" instructions with absolute
        operands, that only take one instruction rather than two.
        sparc-opcode.h (fdiv*):  Mark instructions "S"pecial.
        subsegs.c (subseg_change):  Move tail pointer too.
        symbols.c (colon):  Allow new definitions to override .comm symbols,
        as in VMS.  Sun CC depends on this.
        write.c (new_fix):  Always take r_type argument, not just on sparc.
        Chain fixP's in order, using tail pointer, so relocation
        records come out in forward order like Sun as.  Remove SPARC
        ifdefs.
        write.h: Add seg_fix_tailP, data_fix_tailP, text_fix_tailP.

        * am29k.c: Use s_align_bytes rather than a local copy.

        * read.c (s_align):  Rather than ifdef it, make two functions,
        s_align_bytes and s_align_ptwo.  Individual pseudo-op tables
        can call whichever one they like.

        * write.c (append):  Move from append.c to here.
        append.c:  Remove file. 

        * Makefile (MDSRC, mdsrc):  Easy way to edit all md.c's.
        Fix options.  Add option for -DDEBUG for know() and assert().
        Remove append.c, am29k.h.  Don't build special read-sparc.o.
        Remove sparc.h.  "make clean" removes am29k .o's.  Add
        dependencies on reloc.h.

Thu Oct 18 17:56:34 1990  John Gilmore  (gnu at cygint)

        * Generalize sparc extensions to relocation info.  Gas now
        keeps relocation information internally in a different format
        than how it is stored in the resulting .o.  md_ri_to_bytes()
        converts to external format.  md_reloc_size says how large
        each relocation record is in external format.
        sparc.h:  Remove this file.  Rename to reloc.h.  Rename struct
        to reloc_info_generic.
        reloc.h:  Add relocation types for AMD 29000.
        read.c, write.c:  Always call fix_new with reloc-type argument.
        write.c (emit_relocations): Make md_ri_to_bytes write directly
        to output area rather than overwriting its argument then
        bcopying it.
        md.h:  Declare md_reloc_size and md_ri_to_bytes.
        i386.c, am29k.c, vax.c, ms32k.c, m68k.c, sparc.c: include reloc.h.
        (md_reloc_size): Specify correct value.
        (md_ri_to_bytes):  Convert format from internal to external.

        write.c (write_object_file):  Call md_section_align() which
        rounds section sizes up if desired. 
        sparc.c (md_section_align):  Round to 8 byte boundary.
        i386.c, am29k.c, vax.c, ns32k.c, m68k.c (md_section_align):  Nop.

Mon Oct 15 22:06:11 1990  John Gilmore  (gnu at cygint)

        Changes in support of the AMD 29000 version of gas.

        * am29k-opcode.h:  Add dummy entry to end so we can examine
        item N+1 without exceeding table.

        * am29k.h:  New include file, derived from sparc.h.  Kludged
        together, still needs major work to get relocation working.

        * am29k.c:  New file, derived from sparc.c.
        Put 29k-specific ASM29K pseudo-ops into table.
        Change comment_chars to ASM29K.
        Change s_seg to s_use.
        Change s_sparc_align to s_29k_align, default operand to 4.
        (define_some_regs):  Define special register names.
        (md_begin):  Preprocess opcode table to mash together all
        the variants of single opcodes.  This simplifies later handling.
        Call define_some_regs to preset special reg names.
        (parse_operand):  Add, parses out an operand from a stmt.
        (machine_ip):  Simplify, since 29K is simpler asm language.
        Handle the various keyletters in the opcode table.


        Handle include files in the assembler, with a .include
        pseudo-op.
        * as.h (input_scrub_include_file):  declare.
        * as.c (perform_an_assembly_pass):  Avoid buffer hacking.
        Start us off in text segment.
        * read.c (read_a_source_file):  Take a name as argument,
        internalize all buffer handling.  Don't start a new text
        subsegment on each entry.  Actually use the start and end
        pointers returned by input_scrub_next_buffer.
        (s_include):  Call input_scrub_include_file for .include.
        * input-scrub.c:  Fix comments.
        (struct input_save):  Add, for saving state at .include.
        (input_scrub_push, input_scrub_pop):  Add, push & pop state.
        (input_scrub_begin):  Initialize next_saved_file.
        (input_scrub_end):  Free buffer.
        (input_scrub_include_file):  Add, to include a file.
        (input_scrub_close):  Add, to close a file.
        (input_scrub_next_buffer):  Set buffer-start address for
        caller.  If we hit EOF and were included, pop to previous file.
        * input-file.c:  Remove old includes.  Remove old file-descriptor
        hacking code, that was commented out.
        (struct saved_file):  Add, for saving state at .include.
        (input_file_push, input_file_pop):  Add, push & pop state.
        (input_file_open):  Don't buffer all files in one place.
        (input_file_close):  Add, close input file.
        * input-file.h: Declare new functions.
        * app.c: (struct app_save):  Add, for saving state at .include.
        (app_push, app_pop):  Add, push and pop state.
        (do_scrub_next_char):  Move its static state variables out so
        they can be saved and restored.


        * app.c:  Allow overriding of character meanings by machine
        dependent strings.  Avoid wiring character constants into app.c.
        (do_scrub_begin):  New meanings override old ones, not "OR" them.
        Only handle /* comments if / is not already in use.
        (do_scrub_next_char):  Reorganize mass of nested if's
        into a switch for speed.  Don't assume ';' is line terminator.
        Reorganize switch on characters, into a switch on their (machine-
        dependent) lexer table meanings.
        

        Encapsulate knowledge of segment types in fewer places.
        This allows us to add the "SEG_REGISTER" type, as well as
        providing flexibility for eventual COFF/ELF support.
        * struc-symbol.h (symbol_to_segment, symbol_to_segment_type,
        set_symbol_segment, set_symbol_segment_keep_ext,
        segment_name):  Define macros to encapsulate this info.
        * as.h:  Remove externs for seg_name, seg_N_TYPE, N_TYPE_seg.
        * symbols.c (symbol_new):  Change 'type' arg to 'seg'.
        * expr.c, i386.c, m68k.c, ns32k.c, read.c, symbols.c, vax.c,
        write.c:  Use macros.
        * i386.c, m68k.c, ns32k.c, vax.c, write.c: Change 2nd arg type of
        md_estimate_size_before_relax.
        * expr.c, read.c:  Change 'type' arg to symbol_new.
        * read.c, symbols.c, vax.c, write.c:  Move md.h to end of includes.


        Allow expressions to evaluate to registers.
        * as.h:  Add SEG_REGISTER.
        * struc-symbol.h:  Add fake N_REGISTER type.
        * subseg.c:  Add types to tables.
        * expr.c (operand):  Symbols of SEG_REGISTER type are
        immediately evaluated like those of SEG_ABSOLUTE.
        (clean_up_expression):  Clean up SEG_REGISTER exprs.


        Allow machine descriptions to cleanly extend the set of
        possible operands.
        * expr.c (operand):  Call md_operand before rejecting an
        operand as unacceptable.
        * md.h:  declare.
        * i386.c, ns32k.c, m68k.c, sparc.c, vax.c:  Define null function.
        * am29k.c (md_operand):  Use this for %% and & prefix operators.
        

        Allow machine descriptions to cleanly permit symbols to be
        predefined upon first usage.
        * symbols.c (symbol_find_or_make):  Call md_undefined_symbol
        before making an undefined symbol.
        * md.h:  declare.
        * i386.c, ns32k.c, m68k.c, sparc.c, vax.c:  Define null function.
        * am29k.c (md_undefined_symbol):  use this for the local and
        global register names; since there are hundreds of them, it
        only defines them upon their first use.
        * expr.c (operand):  Call symbol_find_or_make rather than
        roll our own undefined symbols.


        Miscellaneous changes:

        * as.h (know):  Make this useful if DEBUG defined.

        * write.h: Support SPARC-like relocation throughout all
        versions.

        * read.c (read_a_source_file): Report the name of invalid
        pseudo-ops.  Don't double-report junk characters.  Close the
        input file, which gas never used to do.
        (ignore_rest_of_line):  Report junk chars in ascii if
        printable.
        (s_ignore):  Ignore entire statement; used for 'listing
        control' statements from ASM29K, e.g. .eject.

        * read.c (s_lsym):  Handle register equates too.

        * read.c:  Add most ASM29K pseudo-ops to the master table.
        Not all are implemented yet.

        * cond.c:  New file, for functions implementing conditional
        assembly pseudo-ops: .ifdef, .ifndef, .else, .endif, .ifseq,
        .ifsne, .end.  So far, they are just stubbed out.

        * read.c (pobegin):  Allow the machine dependent pseudo-op
        table to override the generic one.  Remove #ifdef SPARC
        on .word, since it can now be overridden.

        * expr.c (operand):  Support radix-2 constants.  Kill off
        support for octals with digits '8' and '9'.  Initial steps
        toward more general support for local-labels.

        * symbols.h (symbol_table_lookup):  Remove macro, change all
        occurrences (in read.c, expr.c, symbols.c) to symbol_find.

        * read.h (is_end_of_line):  Define for external use.

        * i386.c (alloca):  Use builtin_alloca or include or extern.

        * Makefile:  Add ALL and all: entries.  Add asm29k entries.
        Add cond.c and cond.o.  Remove special handling for messages.o.
        Add lint entry.

Thu Sep 27 13:43:49 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * m68k.c (get_num)  Fix so that 1:w is treated properly.

        * Makefile  Replace references to a.out.h with a.out.gnu.h

Tue Sep 25 15:50:36 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * sparc.c  (md_number_to_imm)  Fix so that RELOC_32 locations contain
        zero, so that it will work with some sparc loaders which don't assume
        that the locations in question do.  A xix line patch from Michael Bloom
        (usc!srhqla!quad1!psivax!ttidca!mb@zaphod.mps.ohio-state.edu)

Mon Sep 24 11:43:15 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * as.c  #include <sys/types.h> if _POSIX_SOURCE defined.  This because
        <signal.h> uses pid_t that's defined in it.

        * m68k.c reverse the sense of -l option, and allow :w and :l to
        override the default size of AOFF indexes.

        Also, allow -l to shorten branches to unknown labels from LONG to WORD.

Thu Sep 13 17:05:09 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * vax.c (md_parse_option)  Don't print a warning msg if given -J

Wed Sep  5 14:26:14 EDT 1990    Jay Fenlason

        * expr.c  (operand)  Don't get garbaged high-order bits when given a
        lot of leading zeroes.

Tue Sep  4 11:40:21 EDT 1990    Jay Fenlason

        * read.c (pseudo_set) Compain if we're setting the symbol to the
        difference of two symbols which are in different frags.  (We can't
        find out how far apart they are.)

Wed Aug 15 12:18:58 EDT 1990    Jay Fenlason

        * m68k.c (m68k_ip_op)  Dyke out the code that deals with parsing
        :[wl] at the end of expressions since it is handled in get_num()
        and this was putting the result in the wrong place anyway.
        Corrected a couple of other references to ->isiz instead of con?->e_siz

Mon Aug 13 15:53:46 EDT 1990    Jay Fenlason

        * read.c  Handle .align specially on the sparc, or any other machine
        where OTHER_ALIGN is defined.  Added option and comments about it
        to Makefile.

Fri Aug 10 12:24:33 EDT 1990    Jay Fenlason

        * m68k.c (get_num)  Handle SEG_PASS1 expressions.

Mon Aug  6 16:32:29 EDT 1990    Jay Fenlason

        * write.c  (fixup_segment) Added two patches for the NS32k
        and SEQUENT  A six line patch from Ian Dall
        (asgard!aegir!hugin!augean!sibyl!ian@munnari.oz.au)

Wed Aug  1 13:30:48 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * m68k.c  Include REGISTER_PREFIX ifdefs.

        * write.c Include LOCAL_LABEL() and DOT_LABEL_PREFIX feature.

        * vax.c (md_parse_option)  Accept -H option.

        * vms.c New version of case hasher, etc.  These from Eric Youngdale
          <YOUNGDALE@v6550c.nrl.navy.mil>

Fri Jul 20 13:39:02 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * README        Added README.APOLLO and README.COFF stuff

Wed Jul 18 16:29:22 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * Makefile  Added option for SEQUENT_COMPATABILITY

        * ns32k.c  Add configurable syntax feature from
                ian@sibyl.eleceng.ua.oz@augean.ua.oz.au
                and SEQUENT_COMPATABILITY

        * ns32k-opcode.h  Add configurable syntax feature.

Mon Jul 16 11:44:14 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * write.c (relax_segment)  On ns32k, add fragP->fr_pcrel_adjust to
        aim.
                (fixup_segment)  On ns32k, don't subtract size from
        add_number on pcrel external symbols.

        * ns32k.c (md_relax_table)  Use correct max displacements.
        This is a six-line patch from ian@sibyl.eleceng.ua.oz.au

        * ns32k.c (md_atof, convert_iif)  Emit floating point numbers in
        the correct byte order.  A seven line patch from
        ian@sibyl.eleceng.ua.oz.au

        * ns32k.c (all over)  Some lint fixes.

Mon Jul  9 13:17:00 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * app.c (do_scrub_next_char)  If a comment is #{whitespace}
        don't treat the next line as comment also.

        * m68k.c (...)  Accept apc@(num:[wl]), etc.

        * i386.c (md_assemble) Get bitfields correct when doing cross
        assembly to 386.  A two line patch from Michael Bloom.
        (usc!srhqla!quad1!ttidca!mb@zaphod.mps.ohio-state.edu).

        * README.APOLLO a new file with vasta@apollo's name, address
        and phone # in it.

        * make-gas.com Deleted references to gdb source files.

Fri Jul  6 14:34:27 EDT 1990    Jay Fenlason (hack@ai.mit.edu)

        * i386.c  Ignore the .optim directive

        * input-file.c  Change from _IOLBF to _IOFBF in setbuffer emulation
        for SYSV.

Mon Jun 18 15:36:49 EDT 1990 Jay Fenlason (hack@ai.mit.edu)

        * sparc.c #ifdef DONTDEF s_sparc_align, since it isn't called from
          anywhere.

Fri Jun 15 15:53:30 EDT 1990 Jay Fenlason (hack@ai.mit.edu)

        * vax.c (md_parse_option)  make the code agree with the documentation
          on the behaviour of the -d option.

Thu Jun  7 14:23:54 EDT 1990 Jay Fenlason (hack@ai.mit.edu)

        * atof-ieee.c  (gen_to_words)  Assemble 0r-0 correctly.

        * Makefile Remove last references to gdb*.c files.

        * version.c  New version 1.36

Tue May 22 13:22:26 EDT 1990 Jay Fenlason (hack@ai.mit.edu)

        * Makefile  Mention a work-around for a possible problem with HPUX7.0

Mon May 21 14:06:04 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)

        * sparc.c (sparc_ip): Change error message from "not in hash table"
        to "unknown opcode".

Wed May 16 15:33:14 EDT 1990    hack@wookumz

        * i386.c (i386_operand)  Print error msg if given an operand like
        4(mumble) which we can't parse.

        * m68k.c (md_assemble)  Add '3' to the list of operand-places that
        can be found in 'symbol-dependent info'.  Also change
        'confusing width' diagnostic to something more meaningful.

Fri May 11 12:09:21 EDT 1990    hack@wookumz

        app.c (do_scrub_next_char)  Don't flush the line after a line
        consisting of a single '/'  A one-line patch from Mike Kupfer
        (kupfer@orc.olivetti.com)

        * i386.c (md_assemble)  Call frag_wane() before calling frag_new()
        A one line patch from Steve Bleazard (steve@robobar.co.uk

Tue May  8 12:56:25 EDT 1990    hack@wookumz

        * atof-generic.c (atof-generic)  Modified the Infinity detection code
          to accept 0rinfinity and 0r-infinity as well as 0rinf and 0r-inf

Thu Apr 26 15:17:31 EDT 1990    hack@wookumz

        * atof-ieee.c  Change value of NaNs to 0x7fff ffff (float) and
        0x7fff ffff ffff ffff (double)  If you want some other value for
        NaN, use .long and spell it out yourself.

        atof-generic.c  (atof_generic)  Cleaned up code that detects NaN
        and Inf.

        vax.c (md_assemble)  print a useful error message if expression()
        returns SEG_PASS1 or SEG_DIFFERENCE and we can't deal with those.

Thu Apr 19 10:30:47 EDT 1990    hack@wookumz

        * input-scrub.c (AFTER_STRING)  Make AFTER_STRING contain a null
        so that the strstr() call when looking for "#NO_APP" after a "#APP"
        will work.  A two character patch from Bruce Robertson
        (bruce@heather.pooh.com)

        * Makefile, i386.c  Use atof-ieee.c instead of atof-i386.c

Mon Apr 16 16:20:55 EDT 1990    hack@wookumz

        * m68k.c (md_relax_table)  Many of the offsets were off by two.
        Fixed some generic spacing problems thoughout the file.

Thu Apr 12 12:22:35 EDT 1990    hack@wookumz

        * sparc.c  (md_ri_to_chars)  Handle little-endian cross assembly.

        * write.c (relax_segment)  Compare addresses correctly to avoid
          accidentally relaxing a branch that we don't have to.
          These small changes from John Gilmore (gnu@toad.com)

Fri Apr  6 12:52:15 EDT 1990    hack@wookumz

        * Makefile, expr.c symbols.c  Correctly document the SUN_ASM_SYNTAX
        option, and make it work.

Tue Mar 20 12:46:59 EST 1990

        * as.c (main)  Only trap SIGHUP, SIGINT, SIGPIPE, and SIGTERM,
                and only if they aren't being ignored.  A three line patch
                from Paul Eggert (eggert@twinsun.com)

        * write.c (relax_segment)  Correct typo 'growth - ' should have been
                growth = 

        * atof-vax.c (next_bits, flonum_gen2vax)  Clean up by sharing some
                variables.  While we're at it, fix next_bits so that it
                doesn't use littlenums that don't exist. . .

Tue Mar 13 16:23:21 EST 1990    hack@wookumz

        * Rename atof-m68k.c atof-ieee.c

        * Delete atof-ns32k.c

        * m68k.c sparc.c ns32k.c atof-ieee.c  Call atof-ieee instead of
                atof-m68k or atof-ns32k

        * Makefile      Compile with atof-ieee.c instead of atof-ns32k.c or
                atof-m68k.c

Mon Mar 12 14:06:55 EST 1990    hack@wookumz

        * as.c  If the signal handler gets called twice, exit immediatly.

        * ns32k.c  Call gen_to_words with a pointer of the proper type, and
          call md_number_to_chars to put the results in the proper byte-order.
          Whoever wrote this code was *sloppy*!

        * Makefile ns32k.o depends on ns32k.c

        * vax.c  (md_parse_option)  If VMS, accept -+ and -h options.

        * vms.c (VMS_Case_Hack_Symbol)  Replace #if NO_CASE_HACKING
                with references to the -h option.  These small VMS patches
                from Angel Li (angel@flipper.miami.edu).

Thu Mar  8 19:18:59 EST 1990    hack@wookumz
        * vms.c         Some trivial patches from Eric Youngdale
                        (YOUNGDALE@v6550c.nrl.navy.mil)

Wed Mar  7 17:12:09 EST 1990    hack@wookumz
        * make-gas.com  (Define error as as_fatal when compiling vax.c and vms.c
                        A two line patch from Eric Youngdale
                        (YOUNGDALE@v6550c.nrl.navy.mil)

Tue Mar  6 16:01:09 EST 1990    hack@wookumz

        * Makefile  Include ns32k options in makefile.  A small patch from
        David Taylor (taylor@think.com).

        * as.c read.c write.c Makefile  #ifdef DONTDEF out all the gdb
        symbol stuff, since it isn't used anymore and it doesn't work.

Mon Mar  5 14:51:04 EST 1990    hack@wookumz

        * i386.c (md_assemble) Replace memchr() with index().

        * as.c  Trap signals 1 through NSIG, print an error msg, and don't
        produce an object file.

        * m68k.c Added a hack so that fsincosx fpx,fpy:fpz works.

        * messages.c New function: as_bad  This is like as_warn, except
        -W doesn't disable it, and calling it inhibits production of an
        object file and causes a non-zero exit code.

Tue Feb 13 14:25:53 EST 1990    hack@wookumz
        * Makefile  Include G0 and LOADLIBES for Sequent Symmetry.
        Based on a small patch from Johan Widen (jw@sics.se)

Thu Feb  1 14:08:58 EST 1990    hack@wookumz
        * m68k.c  Replace 'abort' with 'abort()' which will work.

Wed Jan 24 17:15:08 EST 1990    hack@ai.mit.edu

        * read.c  (ignore_rest_of_line)  Have it print the first junk char
        in both decimal and %c form.

        (read_a_source_file)  On bad pseudo-op, print out the unknown
        pseudo-op's name.

Tue Jan 23 13:12:48 EST 1990    hack@ai.mit.edu

        * read.c (pseudo_set)   If the symbol is external, have it remain
        external.

        * i386-opcode.h  Allow jc as a synonym for jb and jnc as a syn for jnb.


Wed Jan  3 09:35:31 EST 1990    hack@ai.mit.edu

        * ns32k.c [cpureg_032]  Change register id of psr from 0x0b to 0x0d
        * ns32k-opcode.h        Change shift-counts for lsh and lshd
        to one byte instead of 2 and 4.
        A Trivial patch from John F. Peters (think!ames!practic.com!jfp@eddie)

Tue Dec  5 16:37:44 EST 1989    hack@ai.mit.edu

        * ns32k.c (md_create_{long,short}_jump)  Six line patch from
        John F Peters (think!ames!vine!practice.com!jfp) to use the
        correct addressing mode and byte-order for broken-word stuff.

        * write.c (write_object_file)  One line patch to call fix_new_ns32k
        with the correct # of args.

Fri Dec  1 16:44:21 EST 1989    hack@ai.mit.edu

        * atof-generic.c, flonum-mult.c  A real fix for the trailing-zeroes
        problem from Georg Feil (ghfeil@white.toronto.edu)  (two line change)

Mon Nov 27 15:30:46 EST 1989    hack@ai.mit.edu

        * i386-opcode.h  Fixed opcode-table entry for ljmp.  A one char
        patch from eliot@mgm.mit.edu

Mon Nov 20 12:41:28 EST 1989    hack@ai.mit.edu

        * expr.c  Replace the generic_buffer hack with a more portable one */

        * atof-generic.c (atof_generic)  Ignore trailing zeroes after a decimal
        point.  For some reason trailing zeroes (but not trailing nonzeroes) were
        causing loss of precision.  I don't know why. . .

        * vms.c Change copyright notice.  Install changes from Kenneth Adelman
        (adelman@tgv.com) for c++?  (A dozen lines or so)

Mon Nov 13 11:48:44 EST 1989    hack@ai.mit.edu

        * Makefile  Add BINDIR and use it to control where the executable is
        installed.

        * i386.c Use __builtin_alloca if possible (trivial patch from
        Marco S. Hyman pacbell!dumbcat!marc)

Mon Nov  6 18:24:47 EST 1989    hack@ai.mit.edu

        * version.c  New version: 1.35 will be distributed with the
        1.36 gcc release.

Mon Oct 30 10:38:11 EST 1989    hack@ai.mit.edu

        * atof-m68k.c (atof_m68k)  Don't put the bits[] array on the stack,
        since it may be pointed to after atof-m68k exits.

Tue Oct 24 11:15:57 EDT 1989    hack@ai.mit.edu

        * atof-m68k.c  Added #define for bcopy on USG systems.
        #ifdef TEST the print_gen() function.

        * a.out.h  if USE_HP_INC_HDR then use ../binutils/hp-include/a.out.h

Fri Oct 13 14:36:48 EDT 1989    hack@ai.mit.edu

        * vax.c (all)  Ran vax through indent -gnu to make it readable.

        vax.c (vip_op)  Correctly assemble code like jmp $*0x11223344
        by setting vip_nbytes to 4 when using an immediate address.
        I hope this works!

        m68k.c (s_proc (new))  Added s_proc no-op pseudo-op.

        Makefile  Added instructions for compiling on Sequent Symmetry
        and HP 9000/300.

        a.out.h Modified to compile on Sequent and HP above.  (HP port
        based on a msg from asjl@comp.vuw.ac.nz (real name unknown)).

Tue Oct 10 14:39:44 EDT 1989    hack@ai.mit.edu
        * vax.c (vip_op)        Fixed a typo in an error msg and cleaned
        up some spacing stuff.

Wed Sep 27 19:07:12 EDT 1989    hack@ai.mit.edu

        * app.c (do_scrub_next_char)    Fixed parsing of
                # <line> "file" garbage
        text so that it'll work again?  (8 line patch from Mike Hibler
        (mike@cs.utah.edu))

Mon Sep 18 16:26:01 EDT 1989    hack@ai.mit.edu

        * app.c (do_scrub_next_char): Modify parsing of /* ... */ to work
        on the text /* ****/

        * sparc.c (sparc_ip):  Don't abort on insns that use the Alternate
        Spaces.  Try to assemble them correctly.

Thu Sep 14 11:42:44 EDT 1989    hack@ai.mit.edu

        * sparc.c (md_number_to_imm)  Dozen line patch from jkp@sauna.hut.fi
        (Jyrki Kuoppala) so that gas output will work with shared libraries.

        * ns32k.c Include <string.h> instead of <strings.h> if USG defined.

        (md_end)  free(freeptr_static) instead of free(freeptr) .

        * atof-ns32k.c  Include as.h so that sysV stuff (bzero) will be
        defined if needed.  These ns32k changes from
        nixbur!mollers.pad@seismo.css.gov (Josef Moellers)

Fri Sep  1 11:39:52 EDT 1989    hack@ai.mit.edu

        * atof-m68k.c (gen_to_words)  Get the sign right on negative
        floating-point numbers.

Wed Aug 30 13:59:57 EDT 1989    hack@ai.mit.edu

        * Makefile  Remove the rest of the $< entries that kill sun make

Fri Aug 25 15:00:30 EDT 1989    Nobody You Know (hack@ai.mit.edu)

        * atof-m68k.c (gen_to_words) deal with denormalized floating-point
        numbers.

Tue Aug 22 02:03:05 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)

        * Makefile (gas-dist.tar): Put ChangeLog in the tar file.

        * version.c: Added comment telling Jay Fenl--I mean people--not to put
        changes in version.c, but to use ChangeLog instead.

        * version.c (version_string): Put "GNU" in all-caps.

        * version.c: Moved all comments about changes to ChangeLog (this file).
        Many anonymous entries have been attributed to Jay Fenlason (hack).

Thu Aug 17 15:53:57 1989  Jay Fenlason  (hack at apple-gunkies.ai.mit.edu)

        * Makefile: Removed $< references that seem
        to choke some versions of make.

        * frags.c (frag_grow): Fixed to deal with requests for very
        large frags (larger than frags.chunk_size).

        * app.c (do_scrub_next_char): Have it ignore any characters
        after the filename in a # line "filename".

        * sparc.c (s_common): On an error, don't print out
        input_line_pointer past the end of the line where the error is.

        * atof-generic.c (atof_generic): Accept any case for
        inf and nan.

        * m68k.c (m68_ip): Don't use PC-relative mode for alterable
        addressing modes.

Tue Aug 15 04:58:36 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)

        * sparc.c (md_begin): Rewrote this function to perform consistency
        checks with the new opcode table.

Fri Aug 11 16:01:16 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)

        * sparc-opcode.h (struct sparc_opcode): Replaced `mask' field with
        `lose'; removed `last' field.  Updated all opcodes accordingly.
        Fixed several opcodes that generated the wrong instructions.
        sparc.c (md_begin, sparc_ip): Changed to use new struct sparc_opcode.

Thu Aug  3 14:44:24 1989  Jay Fenlason  (hack at apple-gunkies.ai.mit.edu)

        * Makefile (a32k): Use read- and write-ns32k.o
        * ns32k.c (encode_operand): Make sure pcrel_adjust starts out zeroed.
        * read.c (cons): Call fix_new_ns32k() if NS32K is defined.
        * write.c (write_object_file): Ditto.
        These so that .word sym-sym (etc) will produce values with
        the proper byte-order.

Wed Aug 2 12:55:?? 1989  Jay Fenlason (hack at apple-gunkies.ai.mit.edu)

        * sparc.c (comment_chars[]): Removed '|' because it was causing
        problems.  Probably not the best fix, since I suspect other
        assemblers (68020) may get | in .stabs also, and the 68020 needs
        the '|' comment character.

Mon Jul 31 09:22:28 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)

        * sparc.c (sparc_ip): Allow the characters [0123] in opcodes.

Tue Jul 25 16:32:12 1989  Jay Fenlason  (hack)

        * atof-generic.c (atof_generic): Tried to keep
        size_of_digits_in_littlenum from going negative.

        * sparc-opcode.h: Added duplicate [i+1] entries to go with
        the [1+i] entries already there.  A kludgy fix, but it works.

Mon Jul 24 17:20:03 1989  Jay Fenlason  (hack)

        * write.c (relax_segment): Modified rs_org code so it won't
        occasionally dump core.

        * write.c (pseudo_set): Modified SEG_DIFFERENCE to (perhaps)
        allow one to set a symbol to the difference of two other symbols.

        * ns32k.c (convert_iif): Moved size_so_far+=size and size=0 inside
         the check for a valid type.

        * sparc-opcode.h: Modified the entries for std "q,[1+i]", "D,[1+i]",
        and "Q,[1+i]".

(In version 1.34)  Jay Fenlason  (hack)

        * Makefile: Reorganized, added stuff to make asparc.

        * sparc.c, sparc-opcode.h, sparc.h: Sparc port.

        * write.c: Set the size of text and bss segments to a multiple of eight
        bytes.

        * m68k.c: Moved .single pseudo-op to machine independent part.

        * atof-generic.c: Fixed type in #ifdef __GNUC__.

        * sparc-opcode.h: Handle "mov REG, %y".

        * make-gas.com: Know that error.c no longer exists.

        * sparc.c: Handle [expr+reg].
        Don't call getExpression when looking for an immediate and getting
        something that starts with % and isn't %hi or %lo.

        * Teach the 68k about long conditional branches.

(In version 1.33)  Jay Fenlason  (hack)

        * Use __builtin_alloca if available.

        * README: Added more instructions for reporting bugs.

        * ns32k-opcode.h: Changed the acbb, acbw, and acbd insns.

        * vax.c: Replaced instances of LENGTH[STRING] with STRING[LENGTH].

        * ns32k.c (encode_operand): Increased max size of bit field for exts
        and inss instructions from 31 to 32 bits.

        * flonum-mult.c (flonum_multip): Fixed typo.

        * m68kc.: Allow #32 to be the same as #0 for bit-field ops.

        * make-gas.com, version.c, hex-value.c, flonum-const.c: VMS fixes.

        * ns32k.c, ns32k-opcode.h: More fixes from taylor@think.com.
        Mostly typos in comments, etc.

        * ns32k-opcode.h: Fixed size of immediate operands to andw and andd
        instructions.

(In version 1.32)  Jay Fenlason  (hack)

        * read.c (s_set): Fixed misnamed variable.

        * as.c: Don't hang if given an invalid option.

        * m68k.c: Fixed bug in creating absolute long addresses for branches.

        * ns3k*: Some small ns32k patches.

        * m68k.c: Recognize 0rnan, 0rinf, 0r-inf.

        * app.c: Don't dump core on unterminated strings.

        * symbols.c: Give reasonable error messages.

        * ns32k*: Allow -m32032 and -m32532 options.

        * atof-*.c: Added support for NaN, Inf, and -Inf in atof_generic and
        the various descriptions.

        * m68k.c (add_fix): Replace occurrences of "width==" with
        "(width)==".  This correct a precedence problem.

        * write.c, struc-symbol.h, m68k-opcode.h, m-hpux.h, Makefile: Changes
        for HP-UX from Chris Hanson (cph@kleph.ai.mit.edu).

        * m68k-opcode.h: Reorder movem insns so gdb will see the ones using the
        register list syntax first.

        * symbols.c (colon): Give more useful error messages when something was
        defined as a .comm and is now trying to be defined locally.
        Also, redefining a symbol is a fatal, not a warning.

        * m68k.c: Fixed a bug in using bignums as literal bit patterns for
        floating-point numbers.

(In version 1.31)  Jay Fenlason  (hack)

        * i386*: More patches.

        * Moved machine-dependent option parsing into the machine-dependent
        source files.

(In version 1.30)  Jay Fenlason  (hack)

        * i386*: New new version.

        * atof-m68k.c: Changed to be smaller, with somewhat better modularity.
        Also fixed an obscure bug wherein next_bits would return random bits.

        * m68k.c: Be more careful about creating PC-relative addressing modes
        on the 68000 and 68010.

        * frags.c (frag_new): Zero out the new frag.

        * Don't choke on "foo= bar" or on formfeeds.

        * read.c: Allow Sun-syntax local labels #ifdef SUN_ASM_SYNTAX.
        * m-sun3.h: Defined SUN_ASM_SYNTAX.

(In version 1.29)  Jay Fenlason  (hack)

        * i386.c: Newer version that fixes a bug wherein a jump instruction
        would be split between two frags.

        * i386*: New version.

        * m68k.c: #ifdef M_SUN and -m68010, produce Sun-2 executables.

(In version 1.28)  Jay Fenlason  (hack)

        * m68k.c: Added .single pseudo-op.

        * Made ". = X" and ".set .,X" equivalent to ".org X".
        The pseudo-symbol "." has the value of the location the assembler is
        currently assembling to.

(In version 1.27)  Jay Fenlason  (hack)

        * Merged ns32k and i386 support.

(In version 1.26)  Jay Fenlason  (hack)

        * Added partial ns32k support.

        * Added RMS's evil .word misfeature.  Invented the -k (kludge) option
        to warn that this misfeature was used.

        * Modified some files to get rid of warnings from GCC.

        * Added fix so that / can also be a comment character by itself.

(In version 1.25)  Jay Fenlason  (hack)

        * Installed patches for VMS.

        * as.h (SIZEOF_STRUCT_FRAG): Added space before backslash-newline.

        * messages.c: Fixed typo.

        * app.c: Handle : correctly.

        * error.c: Removed; no longer used.

        * m68k-opcode.h: Added fnop.
        Fixed to correctly handle fmovem with a register list and
        non-predecriment addressing mode.

        * m68k-opcode.h: Fixed to know about long form of FBcc insns.

        * write.c: Warn if a fixup ended up being wider than its field width.

(In version 1.24)  Jay Fenlason  (hack)

        * Accept and ignore -mc68010 and -m68010 switches.

        * Correctly assemble long subroutine calls on the 68000 without using a
        68020-specific instruction.

        * When calling with no filenames, read stdin.

(In version 1.23)  Jay Fenlason (hack)

        * app.c: Rewritten.

        * xmalloc.c, xrealloc.c: Replaced to work with GCC.

(In version 1.22)  Jay Fenlason  (hack)

        * write.c: Fixed a VMS bug.

        * m68k.c: Fixed a bug having to do with turning absolute into
        PC-relative.

        * atof-m68k.c (atof_m68k, gen_to_words): Try to avoid a problem with
        running off the end of the LITTLENUMS.

        * vax.c: Fixed so parenthesized expressions work.

        * atof-generic.c: Added a cast that fixes problems with some C
        compilers.

(In version 1.21)

        * Changes for VMS support and correct bitfield order for
        cross-assembly.

(In version 1.20)

        * m68k*: Fixed "fmovel #N, fpcr".  Added fpcr and fpsr to the list of
        registers.

(In version 1.19)

        * m68k.c? (md_convert_frag): Don't put the fixups for absolute long to
        PC-relative in the data segment.

        * atof-generic.c: #include <alloca.h> #ifdef sparc.

(In version 1.18)

        * Re-fixed _vfprintf stuff (?).

        * Made "movem REG, ADDR" work.

        * Improved preprocessing, without temporary files.

(In version 1.17)

        * Don't produce an undefined empty symbol for ".globl foo," (a line
        ending with a comma).

        * Fixed a bug wherein ".long X" became ".long 0" on the Sparc.

        * Fixed a bug which caused many "#APP" "#NO_APP" pairs to dump core.

        * Fixed calls to _doprnt to call _vfprintf #ifndef NO_VARARGS.

(In version 1.16)

        * Merged HP-UX changes from Chris Hanson (cph@zurich.ai.mit.edu).

        * flonum-multip.c: Renamed to flonum-mult.c.

        * m-hpux.h: Created.

        * m68k.c (bcopy): Fixed.

(In version 1.15)

        * struct-symbol.h: Renamed to struc-symbol.h.

(In version 1.14)

        * vax.c: Added a quick fix for the offset of fixed-width branches not
        fitting in the field given.

        * gdb-lines.c, read.c: Added support for .gdline and .gdbline
        pseudo-ops.

(In version 1.13)

        * read.c, atof-generic.c: Fixed bugs in reading in floating-point
        numbers.

        * m68k-opcode.h: Made "fmovep a0@, fp0" work.

(In version 1.12)

        * write.c: Fixed an obscure bug in relaction that would occasionally
        cause the assembler to stop relaxing when it really had at least one
        more pass to do.

(In version 1.11)

        * m68k*: Allow register lists in fmovem.

        * Added more floating-point exponents.

        * Print an error message on exponent overflow.

(In version 1.10)

        * Fixed floating point bugs that made it generate incorrect numbers for
        values over 10^16 or so.

(In version 1.09)

        * Fixed bug wherein you couldn't forward reference local label 0.

(In version 1.08)

        * m68k.c, m68k-opcode.h: Added support for fmovem with register lists.

        * Fixed an obscure bug having to do with generating PC-relative
        addressing mode for things in the middle of the instruction instead of
        at the end.

Wed Mar  1 15:29:24 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)

        * *.*: Modified copyright notices to reflect new General Public
        License. 

        * Makefile: Added copyright notice.

Fri Feb 17 09:42:01 1989  Jay Fenlason  (hack at spiff)

        * Patched frags.c so that new frags start out bzero()ed.

Thu Jan 26 14:23:44 1989  Jay Fenlason  (hack at apple-gunkies.ai.mit.edu)

        * Added patches from pace to files as.h i386.c i386-opcode.h
          imull foo,%eax no longer gets assembled into the 32-64 bit
          multiply, which clobbers %edx behind gcc's back

          jcxz/jecxz were backwards

          There was a bug when using %ebp as a base register with no
          displacement

          Instructions like andb $0xffffff, %al used to put out too many
          immediate bytes

          The splitting jump instructions across frags could happen when
          obstack_room()==6 too.
\f
Local Variables:
mode: indented-text
left-margin: 8
version-control: never
End: