gas/ChangeLog

   1 2007-05-29  Alan Modra  <amodra@bigpond.net.au>
   2
   3         * write.h (EXEC_MACHINE_TYPE): Delete.
   4         (string_byte_count, section_alignment): Delete.
   5
   6 2007-05-28  Nathan Sidwell  <nathan@codesourcery.com>
   7
   8         * app.c (do_scrub_chars): Cope with \ at end of buffer.
   9
  10 2007-05-26  Alan Modra  <amodra@bigpond.net.au>
  11
  12         * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
  13         top 32 bits of 64 bit value if so doing results in passing
  14         range check.  Rewrite sign extension fudges similarly.  Enable
  15         fudges for powerpc64 too.  Report user value if range check
  16         fails rather than fudged value.  Negate PPC_OPERAND_NEGATIVE
  17         range rather than value, also to report user value on failure.
  18
  19 2007-03-25  Paul Brook  <paul@codesourcery.com>
  20
  21         * config/tc-arm.c (T2_SUBS_PC_LR): Define.
  22         (do_t_add_sub): Correctly encode subs pc, lr, #const.
  23         (do_t_mov_cmp): Correctly encode movs pc, lr.
  24
  25 2007-05-24  Steve Ellcey  <sje@cup.hp.com>
  26
  27         * Makefile.in: Regnerate.
  28         * configure: Regenerate.
  29         * aclocal.m4: Regenerate.
  30         * doc/Makefile.in: Regenerate.
  31
  32 2007-05-22  Bob Wilson  <bob.wilson@acm.org>
  33
  34         * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
  35         and index entries about automatic alignment of ENTRY instructions.
  36
  37 2007-05-22  Nick Clifton  <nickc@redhat.com>
  38
  39         * doc/as.texinfo: Use @copying around the copyright notice.
  40
  41 2007-05-18  Joseph Myers  <joseph@codesourcery.com>
  42
  43         * config/tc-mips.c (s_mipsset): Use generic s_set for directives
  44         containing a comma.
  45
  46 2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>
  47
  48         PR gas/4517
  49         2003-06-05  Michal Ludvig  <mludvig@suse.cz>
  50         * doc/as.texinfo: Document new directives: .cfi_restore,
  51         .cfi_undefined, .cfi_same_value, .cfi_return_column,
  52         .cfi_remember_state and .cfi_restore_state.
  53
  54 2007-05-17  Nathan Sidwell  <nathan@codesourcery.com>
  55
  56         * config/tc-m68k.c (md_apply_fix): Show value of out of range
  57         fixups in error message.
  58         (md_conver_frag_1): Propagate the fix source location and use
  59         as_bad_where rather than fatal, for better error messages.
  60
  61 2007-05-16  Paul Brook  <paul@codesourcery.com>
  62
  63         * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
  64
  65 2007-05-15  Mark Shinwell  <shinwell@codesourcery.com>
  66
  67         * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
  68
  69 2007-05-15  Vincent Riviere  <vincent.riviere@freesbee.fr>
  70
  71         PR gas/3041
  72         * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
  73         addend is stored for relocs against weak symbols.
  74         (md_apply_fix): So not loose track of addend for relocs against
  75         weak symbols.
  76
  77 2007-05-14  Thiemo Seufer  <ths@mips.com>
  78
  79         * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
  80
  81 2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>
  82
  83         * config/tc-score.c (data_op2, validate_immediate): Fix bug for
  84         addri, addri.c, subi, and subi.c when immediate number is hex.
  85         (score_insns): Remove subis and subis.c.
  86         (do_sub_rdi16): Delete.
  87
  88 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
  89
  90         * config/tc-spu.c (md_pseudo_table): Add int, long, quad.  Call
  91         spu_cons for word.
  92         (md_assemble): Tidy use of insn.flag.
  93         (get_imm): Likewise.  Handle uppercase input too.
  94         (spu_cons): New function.
  95         * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
  96         (TC_FORCE_RELOCATION): Don't resolve them either.
  97
  98 2007-05-05  Mark Shinwell  <shinwell@codesourcery.com>
  99
 100         * config/tc-arm.c (md_apply_fix): Generate more accurate
 101         diagnostic when 8-bit immediate range is exceeded for
 102         BFD_RELOC_ARM_OFFSET_IMM8.
 103
 104 2007-05-04  Alan Modra  <amodra@bigpond.net.au>
 105
 106         PR gas/4460
 107         * config/tc-i386.c (lex_got): Don't replace the reloc token with
 108         a space if we already have a space.
 109
 110 2007-05-03  H.J. Lu  <hongjiu.lu@intel.com>
 111
 112         * config/tc-i386.c (match_template): Don't explicitly check
 113         suffix for crc32 in Intel mode.
 114         (process_suffix): Issue an error for crc32 if the operand size
 115         is ambiguous.
 116
 117 2007-05-03  Vincent Riviere  <vincent.riviere@freesbee.fr>
 118             Nick Clifton  <nickc@redhat.com>
 119
 120         PR gas/3041
 121         * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
 122         (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
 123         (md_apply_fix): Put zero values into the frags referencing weak
 124         symbols.
 125
 126 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
 127
 128         PR 4448
 129         * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
 130         PPC_OPERAND_PLUS1.
 131
 132 2007-05-01  H.J. Lu  <hongjiu.lu@intel.com>
 133
 134         * config/tc-i386.c (match_template): Check suffix for crc32 in
 135         Intel mdoe.
 136         (process_suffix): Default the suffix of 8bit crc32 to
 137         BYTE_MNEM_SUFFIX.
 138         (check_byte_reg): Skip check for 8bit crc32.
 139
 140 2007-04-30  H.J. Lu  <hongjiu.lu@intel.com>
 141
 142         * config/tc-i386.c (md_assemble): Use register_prefix in
 143         error/warning message.
 144         (check_byte_reg): Likewise.
 145         (check_long_reg): Likewise.
 146         (check_qword_reg): Likewise.
 147         (check_word_reg): Likewise.
 148         (process_operands): Likewise.
 149
 150 2007-04-30  Alan Modra  <amodra@bigpond.net.au>
 151
 152         PR 4436
 153         * config/tc-ppc.c (ppc_insert_operand): Disable range check if
 154         min > max.
 155
 156 2007-04-28  Thiemo Seufer  <ths@networkno.de>
 157
 158         * config/tc-mips.c: Fix comment.
 159
 160 2007-04-26  Anatoly Sokolov <aesok@post.ru>
 161
 162         * config/tc-avr.c (mcu_types): Add support for atmega8hva and
 163         atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
 164         * doc/c-avr.texi: Document new devices.
 165
 166 2007-04-24  Alan Modra  <amodra@bigpond.net.au>
 167
 168         * Makefile.am: Run "make dep-am".
 169         * Makefile.in: Regenerate.
 170
 171 2007-04-23  Nathan Sidwell  <nathan@codesourcery.com>
 172
 173         * config/tc-m68k.c (mcf54455_ctrl): New.
 174         (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
 175         (m68k_archs): Add isac.
 176         (m68k_cpus): Add 54455 family.
 177         (m68k_ip): Split Bg into Bb, Bs, Bg.
 178         (m68k_elf_final_processing): Add ISA_C.
 179         * doc/c-m68k.texi (M680x0 Options): Add isac.
 180
 181 2007-04-22  Alan Modra  <amodra@bigpond.net.au>
 182
 183         * read.c (read_a_source_file): Skip multiple spaces to
 184         cover hack in mmix md_start_line_hook which overwrites a
 185         colon with a space.  Delete sermon and needless assertion.
 186
 187 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 188
 189         * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
 190         (md_atof): Make number_of_chars unsigned.  Revert last change.
 191         * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
 192         * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
 193         * config/tc-sh.h (md_optimize_expr): Likewise.
 194         * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
 195         assertion.
 196         * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
 197
 198 2007-04-21  Nick Clifton  <nickc@redhat.com>
 199
 200         * config/atof-vax.c (md_atof): Fix comparison inside know().
 201
 202         * config/tc-ia64.c (emit_one_bundle): Fix typo.
 203
 204 2007-04-21  Alan Modra  <amodra@bigpond.net.au>
 205
 206         * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
 207         * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
 208         Don't skip over NUL char.
 209         (pseudo_set): Set X_op for registers to O_register.
 210         * symbols.c (symbol_clone): Remove assertion that sym is defined.
 211         (resolve_symbol_value): Resolve O_register symbols.
 212         * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
 213         Instead find st(0) by hash lookup.
 214         * config/tc-ppc.c (ppc_macro): Warning fix.
 215
 216         * as.h (ENABLE_CHECKING): Default define to 0.
 217         (know): Assert if ENABLE_CHECKING.
 218         (struct relax_type): Remove superfluous declaration.
 219         * configure.in (--enable-checking): New.
 220         * configure: Regenerate.
 221         * config.in: Regenerate.
 222         * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
 223         Check for duplicate powerpc_operands entries.
 224
 225 2007-04-20  Nathan Sidwell  <nathan@codesourcery.com>
 226
 227         * config/tc-m68k.c (mcf5253_ctrl): New.
 228         (mcf52223_ctrl): New.
 229         (m68k_cpus): Add 5253, 52221, 52223.
 230
 231         * config/m68k-parse.h (RAMBAR_ALT): New.
 232         * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
 233         (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
 234         mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
 235         mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
 236         mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
 237         RAMBAR1.
 238         (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
 239         (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
 240         (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used.  Add it
 241         to control register mapping.
 242
 243 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 244
 245         * messages.c (as_internal_value_out_of_range): Fix typo in
 246         error message.  Return after printing domain error.
 247         * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
 248         in max when shifting right.
 249
 250 2007-04-20  Alan Modra  <amodra@bigpond.net.au>
 251
 252         * messages.c (as_internal_value_out_of_range): Extend to report
 253         errors for values with invalid low bits set.
 254         * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
 255         fields.  Check that operands and opcode fields are disjoint.
 256         (ppc_insert_operand): Check operands using mask rather than bit
 257         count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
 258         insertion code.
 259         (md_apply_fix): Adjust for struct powerpc_operand change.
 260
 261 2007-04-19  Paul Brook  <paul@codesourcery.com>
 262
 263         * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
 264         Thumb-1.  Add sanity check for bogus relaxations.
 265
 266 2007-04-19  Paul Brook  <paul@codesourcery.com>
 267
 268         * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
 269
 270 2007-04-19  Alan Modra  <amodra@bigpond.net.au>
 271
 272         * Makefile.am: Run "make dep-am".
 273         * Makefile.in: Regenerate.
 274
 275 2007-04-19  Nathan Froyd <froydnj@codesourcery.com>
 276
 277         * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
 278
 279 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 280
 281         * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
 282
 283 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 284
 285         * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
 286         (match_template): Handle operand size for crc32 in SSE4.2.
 287         (process_suffix): Handle operand type for crc32 in SSE4.2.
 288         (output_insn): Support SSE4.2.
 289
 290 2007-04-18  H.J. Lu <hongjiu.lu@intel.com>
 291
 292         * config/tc-i386.c (cpu_arch): Add .sse4.1.
 293         (process_operands): Adjust implicit operand for blendvpd,
 294         blendvps and pblendvb in SSE4.1.
 295         (output_insn): Support SSE4.1.
 296
 297 2007-04-18  Paul Brook  <paul@codesourcery.com>
 298
 299         * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
 300
 301 2007-04-16  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 302
 303         * config/tc-sh.c (sh_handle_align):  Call as_bad_where instead
 304         of as_warn_where for misaligned data.
 305
 306 2007-04-15  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 307
 308         * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
 309         rs_fill frags.
 310
 311 2007-04-14  Steve Ellcey  <sje@cup.hp.com>
 312
 313         * Makefile.am: Add ACLOCAL_AMFLAGS.
 314         * Makefile.in: Regenerate.
 315
 316 2007-04-14  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
 317
 318         * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
 319         (sh_optimize_expr): Likewise.
 320         * config/tc-sh.h (md_optimize_expr): Define.
 321         (sh_optimize_expr): Prototype.
 322
 323 2007-04-06  Matt Thomas  <matt@netbsd.org>
 324
 325         * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
 326         to emit pcrel relocations by DWARF2 in non-code sections.  Borrowed
 327         heavily from tc-sparc.c.  (vax_cons_fix_new): Likewise.
 328
 329 2007-04-04  Kazu Hirata  <kazu@codesourcery.com>
 330
 331         * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
 332
 333 2007-04-04  Paul Brook  <paul@codesourcery.com>
 334
 335         * config/tc-arm.c (do_neon_ext): Enforce immediate range.
 336         (insns): Use I15 for vext.
 337
 338 2007-04-04  Paul Brook  <paul@codesourcery.com>
 339
 340         * configure.tgt: Loosen checks for arm uclinux eabi targets.
 341
 342 2007-04-02  Sterling Augustine  <sterling@tensilica.com>
 343
 344         * config/tc-xtensa.c (xtensa_flush_pending_output): Check
 345         outputting_stabs_line_debug.
 346
 347 2007-03-26  Anatoly Sokolov <aesok@post.ru>
 348
 349         * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
 350         at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
 351         devices.
 352         * doc/c-avr.texi: Document new devices.
 353
 354 2007-04-02  Richard Sandiford  <richard@codesourcery.com>
 355
 356         * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
 357         * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
 358         * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
 359
 360 2007-03-30  Sterling Augustine  <sterling@tensilica.com>
 361             Bob Wilson  <bob.wilson@acm.org>
 362
 363         * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
 364         Do not check is_loop_target flag.
 365         (xtensa_frob_label): Adjust calls to xtensa_move_labels.
 366         (xg_assemble_vliw_tokens): Likewise.  Also avoid calling
 367         xtensa_move_labels for alignment of loop opcodes.
 368
 369 2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>
 370
 371         * config/tc-i386.c (process_suffix): Reindent a bit.
 372
 373 2007-03-30  Paul Brook  <paul@codesourcery.com>
 374
 375         * config/tc-arm.c (encode_thumb2_ldmstm): New function.
 376         (do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
 377         (do_t_push_pop):  Use encode_thumb2_ldmstm.
 378
 379 2007-03-29  DJ Delorie  <dj@redhat.com>
 380
 381         * config/tc-m32c.c (rl_for, relaxable): Protect argument.
 382         (md_relax_table): Add entries for ADJNZ macros.
 383         (M32C_Macros): Add ADJNZ macros.
 384         (subtype_mappings): Add entries for ADJNZ macros.
 385         (insn_to_subtype): Check for adjnz and sbjnz insns.
 386         (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
 387         (md_convert_frag): Convert adjnz and sbjnz.
 388
 389 2007-03-29  Nick Clifton  <nickc@redhat.com>
 390
 391         * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
 392         initialization.
 393         * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
 394         using ITBL_NUMBER_OF_PROCESSORS.
 395         * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
 396
 397 2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>
 398
 399         * config/tc-i386.c (build_modrm_byte): For instructions with 2
 400         register operands, encode destination in i.rm.regmem if its
 401         RegMem bit is set.
 402
 403 2007-03-28  Richard Sandiford  <richard@codesourcery.com>
 404             Phil Edwards  <phil@codesourcery.com>
 405
 406         * doc/as.texinfo: Put the contents after the title page rather
 407         than at the end of the document.
 408
 409 2007-03-27  Alan Modra  <amodra@bigpond.net.au>
 410
 411         * NEWS: Mention ".reloc".
 412
 413 2007-03-26  Sterling Augustine  <sterling@tensilica.com>
 414
 415         * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
 416         in FLIX instructions.
 417
 418 2007-03-26  Julian Brown  <julian@codesourcery.com>
 419
 420         * config/tc-arm.c (arm_it): Add immisfloat field.
 421         (parse_qfloat_immediate): Disallow integer syntax for floating-point
 422         immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
 423         (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
 424         float.
 425         (neon_cmode_for_move_imm): Reject non-float immediates for float
 426         operands.
 427         (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
 428
 429 2007-03-26  Julian Brown  <julian@codesourcery.com>
 430
 431         * doc/c-arm.texi: Add documentation for .dn/.qn directives.
 432
 433 2007-03-26  Alan Modra  <amodra@bigpond.net.au>
 434
 435         * doc/as.texinfo (Reloc): Document.
 436         * read.c (potable): Add "reloc".
 437         (s_reloc): New function.
 438         * write.c (reloc_list): New global var.
 439         (resolve_reloc_expr_symbols): New function.
 440         (write_object_file): Call it.
 441         (write_relocs): Process reloc_list.
 442         * write.h (struct reloc_list): New.
 443         (reloc_list): Declare.
 444
 445 2007-03-24  Paul Brook  <paul@codesourcery.com>
 446
 447         * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
 448
 449 2007-03-24  Paul Brook  <paul@codesourcery.com>
 450         Mark Shinwell  <shinwell@codesourcery.com>
 451
 452         * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
 453         (parse_operands): Don't expect comma if first operand missing.
 454         Handle OP_oRRw.
 455         (do_srs): Encode register number, checking it is r13.  Update comment.
 456         (insns): Update SRS entries to take a register.
 457
 458 2007-03-23  H.J. Lu  <hongjiu.lu@intel.com>
 459
 460         * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
 461
 462 2007-03-23  Mark Shinwell  <shinwell@codesourcery.com>
 463
 464         * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
 465         attempt to jump to the next instruction into NOPs.
 466
 467 2007-03-23  Alan Modra  <amodra@bigpond.net.au>
 468
 469         * config/tc-spu.c: Don't include opcode/spu.h.
 470         (md_assemble): Set tc_fix_data.insn_tag and arg_format.
 471         (md_apply_fix): Adjust.
 472         * config/tc-spu.h: Include opcode/spu.h.
 473         (struct tc_fix_info): New.
 474         (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
 475         (TC_FORCE_RELOCATION): Define.
 476
 477 2007-03-22  Joseph Myers  <joseph@codesourcery.com>
 478
 479         * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
 480
 481 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 482
 483         * config/tc-i386.c (process_suffix): Check 0x90 instead of
 484         xchg for xchg %rax,%rax.
 485
 486 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 487
 488         * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
 489         and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
 490
 491 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 492
 493         PR binutils/4218
 494         * config/tc-i386.c (match_template): Properly handle 64bit mode
 495         "xchg %eax, %eax".
 496
 497 2007-03-21  Anton Ertl  <anton@mips.complang.tuw>
 498
 499         PR gas/4124
 500         * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
 501
 502 2007-03-21  H.J. Lu  <hongjiu.lu@intel.com>
 503
 504         * Makefile.am: Run dep-am.
 505         * Makefile.in: Regenerated.
 506
 507         * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
 508
 509         * config/tc-i386.h: Include "opcodes/i386-opc.h".
 510         (NOP_OPCODE): Removed.
 511         (template): Likewise.
 512
 513 2007-03-21  Andreas Schwab  <schwab@suse.de>
 514
 515         * config/tc-i386.h (NOP_OPCODE): Restore.
 516
 517 2007-03-18  Mark Shinwell  <shinwell@codesourcery.com>
 518
 519         * config/tc-arm.c (do_mul): Don't warn about overlapping
 520         Rd and Rm operands when assembling for v6 or above.
 521         Correctly capitalize register names in the messages.
 522         (do_mlas): Likewise.  Delete spurious blank line.
 523
 524 2007-03-16  Kazu Hirata  <kazu@codesourcery.com>
 525
 526         * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
 527
 528 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 529
 530         * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
 531         i386_regtab.
 532         (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
 533         on i386_regtab.
 534
 535 2007-03-15  Alexandre Oliva  <aoliva@redhat.com>
 536
 537         PR gas/4184
 538         * app.c (do_scrub_chars): PUT after setting states.
 539
 540 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 541
 542         * Makefile.am: Run "make dep-am".
 543         * Makefile.in: Regenerated.
 544
 545         * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
 546         "opcode/i386.h".
 547         (md_begin): Check reg_name != NULL for the last entry in
 548         i386_regtab.
 549
 550         * config/tc-i386.h: Move many entries to opcode/i386.h and
 551         opcodes/i386-opc.h.
 552
 553         * configure.in (need_opcodes): Set true for i386.
 554         * configure: Regenerated.
 555
 556 2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>
 557
 558         * Makefile.am (REPORT_BUGS_TO): Removed.
 559         (INCLUDES): Remove -DREPORT_BUGS_TO.
 560         * Makefile.in: Regenerated.
 561
 562         * configure.in (--with-bugurl): Removed.
 563         * configure: Regenerated.
 564
 565         * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
 566         (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
 567         (TEXI2DVI): Likewise.
 568         (gasver.texi): Removed.
 569         (MOSTLYCLEANFILES): Remove gasver.texi.
 570         (as.1): Don't depend on gasver.texi.
 571         * doc/Makefile.in: Regenerated.
 572
 573         * doc/as.texi: Include bfdver.texi instead of gasver.texi.
 574
 575 2007-03-14  Daniel Jacobowitz  <dan@codesourcery.com>
 576
 577         * config/tc-arm.c (arm_copy_symbol_attributes): New.
 578         * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
 579         (TC_COPY_SYMBOL_ATTRIBUTES): Define.
 580         * gas/symbols.c (copy_symbol_attributes): Use
 581         TC_COPY_SYMBOL_ATTRIBUTES.
 582
 583 2007-03-14  Paul Brook  <paul@codesourcery.com>
 584
 585         * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
 586
 587 2007-03-14  Alan Modra  <amodra@bigpond.net.au>
 588
 589         PR 4029
 590         * write.c (relax_segment): Insert extra alignment padding
 591         to break infinite relax loop when given impossible
 592         gcc_except_table assembly.
 593
 594 2007-03-12  H.J. Lu  <hongjiu.lu@intel.com>
 595
 596         * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
 597         on i.tm.base_opcode.
 598         (match_template): Likewise.
 599         (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
 600
 601         * config/tc-i386.h (Opcode_D): New.
 602         (Opcode_FloatR): Likewise.
 603         (Opcode_FloatD): Likewise.
 604         (D): Redefined.
 605         (W): Likewise.
 606         (FloatMF): Likewise.
 607         (FloatR): Likewise.
 608         (FloatD): Likewise.
 609
 610 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 611
 612         * app.c (do_scrub_chars): Recognize comments after # line "file".
 613         * read.c (get_linefile_number): New.
 614         (s_app_line): Accept ill-formed .linefile lines as comments.
 615
 616 2007-03-09  Alan Modra  <amodra@bigpond.net.au>
 617
 618         * config/tc-i386.h (WORKING_DOT_WORD): Define.
 619
 620 2007-03-09  Alexandre Oliva  <aoliva@redhat.com>
 621
 622         * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
 623         * as.h (new_logical_line_flags): New.
 624         * input-scrub.c (new_logical_line): Turned into wrapper for...
 625         (new_logical_line_flags): this.  Handle flags.
 626         * read.c (potable): Add linefile.  Adjust appline argument.
 627         (s_app_file): Fake .appfiles no more.
 628         (s_app_line): For .linefile, accept file name and flags.
 629
 630 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 631
 632         * symbols.c (symbol_relc_make_sym): Comment typo fixes.
 633
 634 2007-03-08  Alan Modra  <amodra@bigpond.net.au>
 635
 636         * Makefile.am: Run "make dep-am".
 637         * Makefile.in: Regenerate.
 638         * po/POTFILES.in: Regenerate.
 639
 640 2007-03-07  Joseph Myers  <joseph@codesourcery.com>
 641
 642         * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
 643         bug-reporting URL.
 644         * doc/Makefile.am (gasver.texi): Define BUGURL.
 645         * doc/as.texinfo: Use BUGURL.
 646         * Makefile.in, configure, doc/Makefile.in: Regenerate.
 647
 648 2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>
 649
 650         * config/tc-s390.c (md_parse_option): z9-ec option added.
 651
 652 2007-03-02  Paul Brook  <paul@codesourcery.com>
 653
 654         * config/tc-arm.c (relax_immediate): Always return positive values.
 655         (relaxed_symbol_addr): New function.
 656         (relax_adr, relax_branch): Use it.
 657         (arm_relax_frag): Pass strect argument.  Adjust infinite loop check.
 658
 659 2007-03-01  Joseph Myers  <joseph@codesourcery.com>
 660
 661         * as.c (parse_args): Update copyright date.
 662
 663 2007-02-28  Nathan Sidwell  <nathan@codesourcery.com>
 664
 665         * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
 666
 667 2007-02-28  Nick Clifton  <nickc@redhat.com>
 668
 669         PR gas/3797
 670         * config/tc-d10v.c (do_assemble): Do not generate error messages,
 671         just return -1 whenever a problem is encountered.
 672         (md_assemble): If do_assemble returns -1 generate a non-fatal
 673         error message and return.
 674
 675         PR gas/2623
 676         * config/tc-msp430.c (line_separator_char): Change to '{'.
 677
 678 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 679
 680         * config/tc-m68hc11.c (fixup24): Correct fixup size.
 681         (build_jump_insn): Likewise.
 682         (build_insn): Likewise.
 683         (s_m68hc11_relax): Likewise.
 684
 685 2007-02-27  Alan Modra  <amodra@bigpond.net.au>
 686
 687         * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
 688
 689 2007-02-25  Mark Shinwell  <shinwell@codesourcery.com>
 690
 691         * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
 692
 693 2007-02-23  Alan Modra  <amodra@bigpond.net.au>
 694
 695         * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
 696         (md_assemble): Likewise.
 697
 698 2007-02-22  Alan Modra  <amodra@bigpond.net.au>
 699
 700         * write.c (size_seg): Always clear SEC_RELOC here.
 701         (install_reloc): New function, extracted from..
 702         (write_relocs): ..here.  Combine RELOC_EXPANSION_POSSIBLE code
 703         with !RELOC_EXPANSION_POSSIBLE code.  Don't add fr_offset when
 704         testing frag size.  Set SEC_RELOC here.
 705
 706 2007-02-21  Alan Modra  <amodra@bigpond.net.au>
 707
 708         PR 4082
 709         * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
 710
 711 2007-02-20  Thiemo Seufer  <ths@mips.com>
 712
 713         * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
 714
 715 2007-02-20  Thiemo Seufer  <ths@mips.com>
 716
 717         * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
 718
 719 2007-02-20  Thiemo Seufer  <ths@mips.com>
 720             Chao-Ying Fu  <fu@mips.com>
 721
 722         * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
 723         ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
 724         (macro_build): Add case '2'.
 725         (macro): Expand M_BALIGN to nop, packrl.ph or balign.
 726         (validate_mips_insn): Add support for balign instruction.
 727         (mips_ip): Handle DSP R2 instructions. Support balign instruction.
 728         (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
 729         md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
 730         command line options.
 731         (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
 732         (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
 733         * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
 734         .set dspr2, .set nodspr2.
 735
 736 2007-02-20  Nathan Sidwell  <nathan@codesourcery.com>
 737
 738         * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
 739         (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
 740
 741 2007-02-18  Alan Modra  <amodra@bigpond.net.au>
 742
 743         * write.c (TC_FX_SIZE_SLACK): Define.
 744         (write_relocs): Reinstate check for fixup within frag.
 745         * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
 746         * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
 747         * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
 748         * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
 749         * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
 750
 751 2007-02-17  Mark Mitchell  <mark@codesourcery.com>
 752             Nathan Sidwell  <nathan@codesourcery.com>
 753             Vladimir Prus  <vladimir@codesourcery.com
 754             Joseph Myers  <joseph@codesourcery.com>
 755
 756         * configure.in (--with-bugurl): New option.
 757         * configure: Regenerate.
 758         * dep-in.sed: Remove bin-bugs.h.
 759         * Makefile.am (REPORT_BUGS_TO): Define.
 760         (INCLUDES): Define REPORT_BUGS_TO.
 761         (DEP_INCLUDES): Likewise.
 762         ($(OBJS)): No longer depend on bin-bugs.h.
 763         * Makefile.in: Regenerate.
 764         * doc/Makefile.in: Regenerate.
 765         * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
 766         * as.h: Remove include of bin-bugs.h.
 767
 768 2007-02-17  Alan Modra  <amodra@bigpond.net.au>
 769
 770         * write.c: White space fixes.
 771         (fixup_segment): Move symbol_mri_common_p adjustments..
 772         (write_relocs): ..and symbol_equated_reloc_p adjustments..
 773         (adjust_reloc_syms): ..to here.
 774
 775 2007-02-16  Alan Modra  <amodra@bigpond.net.au>
 776
 777         * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
 778         xmalloc, memset.  Don't bother assigning NULL to known zero mem.
 779         (subseg_set_rest): Remove unnecessary cast.
 780         * write.c: Include libbfd.h.  Replace PTR with void * throughout.
 781         Remove unnecessary forward declarations and casts.
 782         (set_symtab): Delete extern bfd_alloc.
 783         (fixup_segment): Move.
 784
 785 2007-02-15  Nathan Sidwell  <nathan@codesourcery.com>
 786
 787         * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
 788         * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
 789         (mcf5475_ctrl, mcf5485_ctrl): New.
 790         (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
 791         (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
 792         (init_table): Add asid, mmubar, adjust rombar0.
 793
 794 2007-02-14  Alan Modra  <amodra@bigpond.net.au>
 795
 796         * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
 797         * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
 798         (process_operands): Move old Seg2ShortForm and Seg3ShortForm
 799         code, and test for these insns using a combination of
 800         opcode_modifier and operand_types.
 801
 802 2007-02-07  Paul Brook  <paul@codesourcery.com>
 803
 804         * configure.tgt: Add arm*-*-uclinux-*eabi.
 805
 806 2007-02-05  Dave Brolley  <brolley@redhat.com>
 807             Richard Sandiford  <rsandifo@redhat.com>
 808             DJ Delorie  <dj@redhat.com>
 809             Stan Cox  <scox@redhat.com>
 810             Jim Blandy  <jimb@redhat.com>
 811             Nick Clifton  <nickc@redhat.com>
 812             Jim Wilson  <wilson@redhat.com>
 813             Frank Ch. Eigler  <fche@redhat.com>
 814             Graydon Hoare  <graydon@redhat.com>
 815             Ben Elliston  <bje@redhat.com>
 816             John Healy  <jhealy@redhat.com>
 817             Richard Henderson  <rth@redhat.com>
 818
 819         * Makefile.am (CPU_TYPES): Add mep.
 820         (TARGET_CPU_CFILES): Add tc-mep.c.
 821         (TARGET_CPU_HFILES): Add tc-mep.h.
 822         (DEPTC_mep_elf): New variable.
 823         (DEPTC_mep_coff): Likewise.
 824         (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
 825         * configure.in: Support mep.
 826         * configure.tgt: Likewise.
 827         * config/tc-mep.c: New file.
 828         * config/obj-elf.c: New file.
 829         * config/tc-mep.c: New file.
 830         * config/tc-mep.h: New file.
 831         * testsuite/gas/mep: New testsuite with content.
 832         * Makefile.in: Regenerate.
 833         * configure: Regenerate.
 834
 835 2007-02-05  Dave Brolley  <brolley@redhat.com>
 836
 837         * cgen.c (gas_cgen_install_complex_reloc): Removed.
 838         (complex_reloc_installation_howto): Removed.
 839
 840 2007-02-05  Dave Brolley  <brolley@redhat.com>
 841             Graydon Hoare  <graydon@redhat.com>
 842             DJ Delorie  <dj@redhat.com>
 843             Catherine Moore  <clm@redhat.com>
 844             Michael Chastain  <chastain@redhat.com>
 845             Frank Ch. Eigler  <fche@redhat.com>
 846
 847         * symbols.c (use_complex_relocs_for): New, to decide
 848         when to use complex relocs. Add signed RELC support.
 849         (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
 850         encode expression symbols as mangled complex relocation symbols (when
 851         compiled with -DOBJ_COMPLEX_RELOC).
 852         (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
 853         * cgen.c (gas_cgen_md_apply_fix3):  Only set signed_p if RELC. Call
 854         encode_addend with new args. Modify to get start, length from
 855         ifield whenever it is set. Also change condition on which
 856         self-describing relocs are encoded. Add hook into
 857         gas_cgen_encode_addend.
 858         (queue_fixup_recursively): Add signed RELC support. Change from masked
 859         expr to trunc flag. Restore assignment of sub-field value to
 860         temporary in fixups array. Reflect changed meaning of last arg to
 861         queue_fixup_recursively.
 862         (fixup): Add cgen_maybe_multi_ifield member.
 863         (make_right_shifted_expr): New function.
 864         (queue_fixup): Change to recursive function that fragments
 865         fixups if operand has a multi-ifield.
 866         (gas_cgen_parse_operand): Add RELC code to wrap expressions in
 867         symbols, call weak_operand_overflow_check, and fragment call
 868         queue_fixup with operand fields.
 869         (gas_cgen_finish_insn) Modify to manage ifield pointer.
 870         (weak_operand_overflow_check): New function to try to select
 871         insns correctly.
 872         (gas_cgen_encode_addend): New function for relc.
 873         (gas_cgen_install_complex_reloc): Likewise.
 874         (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
 875         * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
 876         cgen_maybe_multi_ifield field to fx_cgen substructure.
 877         * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
 878         * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
 879
 880 2007-02-03  DJ Delorie  <dj@delorie.com>
 881
 882         * config/tc-m32c.c (m32c_cons_fix_new): New.  Added to support 3
 883         byte relocs.
 884         * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
 885         (m32c_cons_fix_new): Prototype.
 886
 887 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 888
 889         * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
 890         (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
 891
 892 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 893
 894         * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
 895         (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
 896         (map_suffix_reloc_to_operator): New.
 897         (map_operator_to_reloc): New.
 898         (expression_maybe_register): Fix incorrect test of return value from
 899         xtensa_elf_suffix.  Rearrange to use map_suffix_reloc_to_operator.
 900         (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
 901
 902 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 903
 904         * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
 905         (tinsn_get_tok): Delete prototype.
 906         * config/tc-xtensa.c (tinsn_get_tok): Delete.
 907
 908 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 909
 910         * config/xtensa-relax.h (struct build_instr): Delete id field.
 911         * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
 912         and LABEL tokens.
 913         (append_literal_op, append_label_op): Remove litnum/labnum arguments;
 914         set op_data fields to zero.
 915         (parse_id_constant): Delete.
 916         (build_transition): Remove code to handle numbered literals and labels.
 917
 918 2007-02-02  Bob Wilson  <bob.wilson@acm.org>
 919
 920         * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
 921         (build_transition_table): Likewise.
 922
 923 2007-02-01  Bob Wilson  <bob.wilson@acm.org>
 924
 925         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
 926         fx_tcbit.
 927         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
 928
 929 2007-02-02  Alan Modra  <amodra@bigpond.net.au>
 930
 931         * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
 932         (struct fix <fx_plt>): Rename to tcbit2.
 933         * write.c (fix_new_internal): Adjust.
 934         (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 935         * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 936         * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 937         * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 938         * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 939         * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 940         * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 941         * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
 942         * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
 943         * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
 944         * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
 945         Instead, compare fx_r_type.
 946         * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
 947         fx_tcbit in place of fx_plt.
 948         * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
 949         * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
 950         to fx_plt.
 951
 952 2007-01-30  Nick Clifton  <nickc@redhat.com>
 953
 954         * as.c (main): Mark symbols created via the --defsym command line
 955         option as volatile so that they can be overridden later on by a
 956         .set directive.  This maintains compatibility with the behaviour
 957         of earlier versions of the assembler.
 958         * doc/as.texinfo (--defsym): Document that the defined symbol's
 959         value can be overridden via a .set directive.
 960
 961 2007-01-28  H.J. Lu  <hongjiu.lu@intel.com>
 962
 963         * config/tc-i386.c (swap_imm_operands): Renamed to ...
 964         (swap_2_operands): This.  Take 2 ints.
 965         (md_assemble): Updated.
 966         (swap_operands): Call swap_2_operands to swap 2 operands.
 967
 968 2007-01-24  DJ Delorie  <dj@redhat.com>
 969
 970         * config/tc-m32c.c (md_pseudo_table): Add .3byte.
 971
 972 2007-01-22  Nick Clifton  <nickc@redhat.com>
 973
 974         PR gas/3871
 975         * tc-score.c: Remove unnecessary uses of _().
 976         Make the err_msg[] a file level local array in order to save
 977         storage space.
 978         Remove unnecessary sprintf()s.
 979
 980 2007-01-18  Mei Ligang  <ligang@sunnorth.com.cn>
 981
 982         PR gas/3871
 983         * config/tc-score.c : Using _() for const string.
 984         Do not assign inst.error with a local string pointer.
 985         (md_section_align): Pad section.
 986
 987 2007-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 988
 989         * config/tc-i386.c (build_modrm_byte): Check number of operands
 990         when procssing memory/register operand.
 991
 992 2007-01-12  Nick Clifton  <nickc@redhat.com>
 993
 994         PR gas/3856
 995         * macro.c (expand_irp): Do not ignore spaces inside quoted
 996         strings.
 997
 998 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
 999
1000         * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1001         * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1002         * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1003         (TC_FORCE_RELOCATION): Define.
1004         (TC_FORCE_RELOCATION_LOCAL): Define.
1005         * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1006
1007 2007-01-12  Alan Modra  <amodra@bigpond.net.au>
1008
1009         * input-file.c (input_file_open): Check fgets return.
1010
1011 2007-01-11  Paul Brook  <paul@codesourcery.com>
1012
1013         * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1014
1015 2007-01-11  Nick Clifton  <nickc@redhat.com>
1016
1017         PR gas/3707
1018         * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1019         variable.
1020
1021         * config/tc-mcore.c (md_number_to_chars): Use
1022         number_to_chars_{big|little}endian.
1023
1024 2007-01-08  Kazu Hirata  <kazu@codesourcery.com>
1025
1026         * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1027         architecture by itself.
1028         (m68k_ip): Don't issue a warning for tbl instructions on fido.
1029         (m68k_elf_final_processing): Treat Fido as an architecture by
1030         itself.
1031
1032 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
1033
1034         * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1035
1036 2007-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1037
1038         * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1039         depending on allow_naked_reg.
1040
1041 2007-01-04  Paul Brook  <paul@codesourcery.com>
1042
1043         * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1044
1045 2007-01-04  H.J. Lu  <hongjiu.lu@intel.com>
1046
1047         PR gas/3830
1048         * config/tc-i386.c (register_prefix): New.
1049         (set_intel_syntax): Set set_intel_syntax to "" if register
1050         prefix isn't needed.
1051         (check_byte_reg): Use register_prefix for error message.
1052         (check_long_reg): Likewise.
1053         (check_qword_reg): Likewise.
1054         (check_word_reg): Likewise.
1055
1056 2006-01-04  Julian Brown  <julian@codesourcery.com>
1057
1058         * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1059         (do_neon_qshl_imm): Likewise.
1060         (do_neon_rshl): New function. Handle rounding variants of
1061         v{q}shl-by-register.
1062         (insns): Use do_neon_rshl for vrshl, vqrshl.
1063
1064 2007-01-04  Paul Brook  <paul@codesourcery.com>
1065
1066         * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1067         and vacle.
1068
1069 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1070
1071         * config/tc-i386.c (swap_operands): Remove branches.
1072
1073 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1074
1075         * config/tc-i386.c: Update copyright year.
1076         * config/tc-i386.h: Likewise.
1077
1078 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1079
1080         * config/tc-i386.c (smallest_imm_type): Return unsigned int
1081         instead of int.
1082
1083 2007-01-03  H.J. Lu  <hongjiu.lu@intel.com>
1084
1085         * config/tc-i386.c: Convert to ISO C90 formatting
1086         * config/tc-i386.h: Likewise.
1087
1088 2007-01-03  David Daney  <ddaney@avtrex.com>
1089
1090         * config/tc-mips.c (md_show_usage):  Clean up -mno-shared
1091         documentation.
1092
1093 For older changes see ChangeLog-2006
1094 \f
1095 Local Variables:
1096 mode: change-log
1097 left-margin: 8
1098 fill-column: 74
1099 version-control: never
1100 End: