1 2010-10-28 Alan Modra <amodra@gmail.com>
3 * config/tc-d30v.c (d30v_cons_align): Don't align .eh_frame.
5 2010-10-26 Alan Modra <amodra@gmail.com>
7 * config/obj-coff.c (coff_format_ops): Fix typo.
9 2010-10-25 Richard Sandiford <rdsandiford@googlemail.com>
11 * config/tc-mips.c (macro2): Delete.
13 2010-10-25 Nathan Sidwell <nathan@codesourcery.com>
15 * config/tc-tic6x.c: Add attribution.
17 2010-10-25 Mark Mitchell <mark@codesourcery.com>
19 * obj.h (struct format_ops): Add adjust_symtab.
20 * config/obj-multi.h (obj_adjust_symtab): Define.
21 * config/obj-aout.c (aout_format_ops): Init new field.
22 * config/obj-coff.c (coff_format_ops): Likewise.
23 * config/obj-ecoff.c (ecoff_format_ops): Likewise.
24 * config/obj-elf.c (elf_format_ops): Likewise.
26 2010-10-25 Alan Modra <amodra@gmail.com>
29 * write.c (relax_frag): Don't allow forward branches to temporarily
30 becomde backward branches.
32 2010-10-23 Mark Mitchell <mark@codesourcery.com>
34 * config/obj-elf.c (elf_adjust_symtab): New. Move group section
35 processing here from elf_frob_file. Ensure that group signature
36 symbols have the name of the group.
37 (elf_frob_file): Move group section processing to
39 * config/obj-elf.h (elf_adjust_symtab): Declare.
40 (obj_adjust_symtab): Define.
41 * config/tc-arm.c (arm_adjust_symtab): Call elf_adjust_symtab.
43 2010-10-22 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
45 * config/tc-sparc.h [TE_SOLARIS] (ELF_TARGET_FORMAT): Define as
47 (ELF64_TARGET_FORMAT): Define as elf64-sparc-sol2.
49 2010-10-21 Joseph Myers <joseph@codesourcery.com>
51 * config/tc-tic6x.c (tic6x_arch_attribute, tic6x_arches,
52 md_assemble, tic6x_set_attributes): Update for attribute renaming.
53 * doc/c-tic6x.texi: Update for attribute renaming.
55 2010-10-19 Alan Modra <amodra@gmail.com>
57 * write.c (relax_segment): Correct address on frag added to stop
58 leb128/align frags bouncing.
60 2010-10-19 Alan Modra <amodra@gmail.com>
63 * frags.h (struct frag): Add "region" field.
64 * write.c (relax_frag): Don't add "stretch" to forward reference
65 target if there is an intervening org or align.
66 (relax_segment): Set region.
68 2010-10-18 Maciej W. Rozycki <macro@linux-mips.org>
70 * config/tc-mips.c (macro)[ldd_std]: Fix the relaxation variant
71 for absolute addressing.
73 2010-10-18 Maciej W. Rozycki <macro@linux-mips.org>
75 * config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs.
77 2010-10-18 Maciej W. Rozycki <macro@linux-mips.org>
79 * config/tc-mips.c (mips_pseudo_table): Add "sbss".
80 (s_change_sec): Handle it.
82 2010-10-15 Mike Frysinger <vapier@gentoo.org>
84 * config/bfin-parse.y (BYTEOP2M): Call BYTEOP2M().
86 2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
88 * config/tc-i386.c (match_template): Check checkregsize
89 instead of w for register size check.
91 2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
93 * config/tc-i386.c (_i386_insn): Add disp32_encoding.
94 (md_assemble): Don't call optimize_disp if disp32_encoding is
96 (parse_insn): Support .d32 to force 32bit displacement.
97 (output_branch): Use BIG if disp32_encoding is set.
99 * doc/c-i386.texi: Document .d32 encoding suffix.
101 2010-10-11 Steve Kilbane <steve.kilbane@analog.com>
103 * config/bfin-lex.l (FLAGS): New state.
104 (X, Z, S, M, T): Require FLAGS state.
105 ("(", ")"): Start/stop FLAGS state.
107 2010-10-11 David Gibson <david.gibson@analog.com>
109 * config/bfin-aux.h (bfin_loop_attempt_create_label): New prototype.
110 * config/bfin-parse.y (LOOP_BEGIN, LOOP_END): Handle numeric labels.
111 * config/tc-bfin.c (bfin_loop_attempt_create_label): New funtion.
113 2010-10-11 David Gibson <david.gibson@analog.com>
115 * config/tc-bfin.c (bfin_gen_loop): Check symbol before removing.
117 2010-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
119 Fix build with -DDEBUG=7
120 * config/obj-coff.c (s_get_name, symbol_dump): Add prototypes.
122 2010-10-07 Bernd Schmidt <bernds@codesourcery.com>
124 * config/tc-tic6x.c (tic6x_try_encode): Correct encoding of fstg field
125 in SPKERNEL instructions.
127 2010-10-06 Nathan Sidwell <nathan@codesourcery.com>
129 * config/tc-arm.c (encode_branch): Remove superfluous braces.
130 (do_t_branch): Move reloc setting to end of routine.
132 2010-10-04 David Daney <ddaney@caviumnetworks.com>
134 * config/tc-mips.c (mips_fix_cn63xxp1): New variable.
135 (mips_ip): Add errata work around when mips_fix_cn63xxp1 set.
136 (OPTION_FIX_CN63XXP1, OPTION_NO_FIX_CN63XXP1): New enum options
138 (md_longopts): Add options for -mfix-cn63xxp1 and -mno-fix-cn63xxp1.
139 (md_parse_option): Handle OPTION_FIX_CN63XXP1 and
140 OPTION_NO_FIX_CN63XXP1.
141 (md_show_usage): Add documentation for -mfix-cn63xxp1.
142 * doc/c-mips.texi (-mfix-cn63xxp1, -mno-fix-cn63xxp1): Document
145 2010-09-29 Bernd Schmidt <bernds@codesourcery.com>
147 * gas/tic6x/insns-bad-1.s: Remove test for readonly tscl.
148 * gas/tic6x/insns-bad-1.l: Likewise.
149 * gas/tic6x/insns-c674x.d: Add test for writeable tscl.
150 * gas/tic6x/insns-c674x.s: Likewise.
152 2010-09-29 Alan Modra <amodra@gmail.com>
154 * expr.c (expr): Correct returned segment value.
156 2010-09-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
158 * configure: Regenerate.
160 2010-09-27 Bernd Schmidt <bernds@codesourcery.com>
162 * config/tc-tic6x.c (tic6x_fix_adjustable): New function.
163 * config/tc-tic6x.h (tic6x_fix_adjustable): Declare.
164 (tc_fix_adjustable): New macro.
166 2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
168 * config/tc-s390.c: (md_parse_option): New option -march=z196.
169 * doc/c-s390.texi: Document new option.
171 2010-09-27 Tejas Belagod <tejas.belagod@arm.com>
173 * config/tc-arm.c (do_neon_ldr_str): Deprecate ARM-mode PC-relative
174 VSTR, issue an error in THUMB mode.
176 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
178 * config/tc-arm.c (arm_ext_virt): New variable.
179 (arm_reg_type): Add REG_TYPE_RNB for banked registers.
180 (reg_entry): Allow registers to be larger than a byte.
181 (reg_alias): Fix type warning.
182 (parse_operands): Parse banked registers when appropriate.
183 (do_mrs): Add support for Virtualization Extensions.
184 (do_hvc): New function.
185 (do_t_mrs): Add support for Virtualization Extensions.
186 (do_t_msr): Likewise.
187 (do_t_hvc): New function.
188 (SPLRBANK): New define.
189 (reg_names): Add banked registers.
190 (insns): Add support for Virtualization Extensions.
191 (md_apply_fixup): Likewise.
192 (arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
193 (arm_extensions): Add 'virt' extension.
194 (aeabi_set_public_attributes): Add support for Virtualization
196 * doc/c-arm.texi: Document 'virt' extension.
198 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
200 * config/tc-arm.c (arm_ext_adiv): New variable.
201 (do_div): New function.
202 (insns): Accept UDIV and SDIV in ARM state.
203 (arm_cpus): The cortex-a15 option has all current v7-A extensions.
204 (arm_extensions): Add 'idiv' extension.
205 (aeabi_set_public_attributes): Update Tag_DIV_use values for the
206 Integer Divide extension.
207 * doc/c-arm.texi: Document the idiv extension.
209 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
211 * config/tc-arm.c (arm_ext_v6m): New variable.
212 (arm_ext_m): Add support for OS extension.
213 (arm_ext_os): New variable.
214 (do_t_swi): In v6-M ensure we have the OS extension.
215 (arm_cpus): The cortex-m1 and cortex-m0 options have the OS
216 extension by default.
217 (arm_archs): Add armv6s-m.
218 (arm_extensions): Add 'os' extension.
219 (cpu_arch_ver): Add support for v6S-M.
220 * doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
221 architecture options.
223 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
225 * config/tc-arm.c (arm_ext_v6z): Remove.
226 (arm_ext_sec): New variable.
227 (do_t_smc): In Thumb state SMC requires v7-A.
228 (insns): Make SMC depend on Security Extensions.
229 (arm_cpus): All -mcpu=cortex-a* options have the Security Extensions.
230 (arm_extensions): Add 'sec' extension.
231 (cpu_arch_ver): Reorder.
232 (aeabi_set_public_attributes): Emit Tag_Virtualization_use as
234 * doc/c-arm.texi: Document Security Extensions.
236 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
238 * config/tc-arm.c (arm_ext_mp): Add.
239 (do_pld): Update comment.
240 (insns): Add support for pldw.
241 (arm_cpus): Update cortex-a5, cortex-a9, and cortex-a15 to support
243 (arm_extensions): Add 'mp' extension.
244 (aeabi_set_public_attributes): Emit correct build attribute when
245 MP extension is enabled.
246 * doc/c-arm.texi: Update for MP extensions.
248 2010-09-23 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
250 * config/tc-arm.c (md_pseduo_table): Add .arch_extension directive.
251 (arm_option_extension_value_table): Add.
252 (arm_extensions): Change type.
253 (arm_option_cpu_table): Rename...
254 (arm_option_fpu_table): ...to this.
255 (arm_fpus): Change type.
256 (arm_parse_extension): Enforce alphabetical order. Allow
257 extensions to be removed.
258 (arm_parse_arch): Allow extensions to be specified with -march.
259 (s_arm_arch_extension): Add.
260 (s_arm_fpu): Update for type changes.
261 * doc/c-arm.texi: Document changes to infrastructure.
263 2010-09-23 Alan Modra <amodra@gmail.com>
265 * config/tc-mn10300.c (tc_gen_reloc): Replace absolute symbols
266 with the absolute section symbol.
268 2010-09-22 Mike Frysinger <vapier@gentoo.org>
270 * config/bfin-parse.y: Fix typo in BYTEOP16P comment.
272 2010-09-22 Robin Getz <robin.getz@analog.com>
274 * config/bfin-parse.y (is_store): New function.
275 (gen_multi_instr_1): Check parallel slots for store insns.
277 2010-09-22 Robin Getz <robin.getz@analog.com>
279 * config/bfin-defs.h (IS_EMUDAT): New define.
280 * config/bfin-parse.y: Accept EMUDAT for any register move.
282 2010-09-22 Robin Getz <robin.getz@analog.com>
284 * config/bfin-parse.y: Improve error messages.
286 2010-09-22 Robin Getz <robin.getz@analog.com>
288 * config/bfin-parse.y (DBG): Fix regno encoding.
289 (DBGCMPLX): Likewise.
291 2010-09-22 Robin Getz <robin.getz@analog.com>
293 * config/bfin-lex.l: Accept multibyte chars in symbol names.
295 2010-09-22 Robin Getz <robin.getz@analog.com>
297 * config/bfin-defs.h (statusflags): Add AC0_COPY, V_COPY, and RND_MOD.
298 * config/bfin-lex.l: Tokenize AC0_COPY, V_COPY, and RND_MOD.
300 2010-09-22 Mike Frysinger <vapier@gentoo.org>
302 * config/bfin-aux.h (bfin_gen_pseudochr): New prototype.
303 * config/tc-bfin.c (bfin_gen_pseudochr): New function.
304 * config/bfin-parse.y: Call bfin_gen_pseudochr for OUTC tokens.
306 2010-09-22 Mike Frysinger <vapier@gentoo.org>
308 * config/bfin-lex.l (abort): Accept case-insensitive abort insn.
309 * config/bfin-parse.y (ABORT): Handle the ABORT token.
311 2010-09-22 Mike Frysinger <vapier@gentoo.org>
313 * config/tc-bfin.c (bfin_cpus[]): Add 0.2 for bf512/bf514/bf516/bf518.
315 2010-09-22 Mike Frysinger <vapier@gentoo.org>
317 * doc/c-bfin.texi (-mcpu): Add bf592.
318 * config/tc-bfin.c (bfin_cpu_type): Add BFIN_CPU_BF592.
319 (bfin_cpus[]): Add 0.0/0.1 for bf592.
321 2010-09-22 Mike Frysinger <vapier@gentoo.org>
323 * config/tc-bfin.c (comment_chars): Add #.
325 2010-09-20 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
327 * config/tc-arm.c (arm_cpus): Correct canonical names for Cortex CPUs.
329 2010-09-20 Richard Henderson <rth@redhat.com>
331 * config/tc-alpha.c (tc_gen_reloc): Remove hack around
332 bfd_perform_reloc for OBJ_ELF.
334 2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
336 * config/tc-arm.c (do_t_ldmstm): Add logic to handle single-register
339 2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
341 * config/tc-arm.c (parse_psr): Add condition for matching "APSR" on
343 (psrs): Add entry for PSR flags, g, nzcvq, nzcvqg.
345 2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
347 * config/tc-arm.c (insns): Change MRC entry to accept APSR_RR instead
350 2010-09-17 Andrew Burgess <aburgess@broadcom.com>
353 * config/obj-elf.c (obj_elf_parse_section_letters): Correct test
354 for error return from md_elf_section_letter.
355 * config/tc-alpha.c (alpha_elf_section_letter): Correct error message.
356 * config/tc-i386.c (x86_64_section_letter): Likewise.
357 * config/tc-ia64.c (ia64_elf_section_letter): Likewise.
358 * config/tc-mep.c (mep_elf_section_letter): Likewise.
360 2010-09-15 Kai Tietz <kai.tietz@onevision.com>
362 * config/obj-coff-seh.c (seh_validate_seg): New funtion.
363 (obj_coff_seh_endproc): Add check for segment.
364 (obj_coff_seh_endprologue): Likewise.
365 (obj_coff_seh_pushreg): Likewise.
366 (obj_coff_seh_pushframe): Likewise.
367 (obj_coff_seh_save): Likewise.
368 (obj_coff_seh_setframe): Likewise.
370 * config/obj-coff-seh.h (seh_context): New member code_seg.
371 * config/obj-coff-seh.c: Implementing xdata/pdata section cloning
372 for link-once code-segment.
374 2010-09-14 Jie Zhang <jie@codesourcery.com>
376 * doc/c-arm.texi: Document -mcpu=cortex-m4.
378 2010-09-09 H.J. Lu <hongjiu.lu@intel.com>
380 * config/tc-i386.c (build_vex_prefix): Check VEXW1 for 2-byte
383 2010-09-09 Joseph Myers <joseph@codesourcery.com>
385 * doc/c-tic6x.texi (.c6xabi_attribute): Document directive.
387 2010-09-09 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
389 * config/tc-arm.c (arm_cpus): Add cortex-a15 entry.
390 * doc/c-arm.texi: Document -mcpu=cortex-a15.
392 2010-09-09 Gunther Nikl <gnikl@users.sourceforge.net>
394 * gas/config/tc-m68k.c (tc_gen_reloc): Handle references to defined
395 weak symbols first if generating an a.out object.
397 2010-09-09 Tejas Belagod <tejas.belagod@arm.com>
399 * config/tc-arm.c (md_apply_fix): Check if widened add, sub are
400 flag-setting and handle accordingly.
402 2010-09-09 Nick Clifton <nickc@redhat.com>
405 * config/tc-arm.c (parse_big_immediate): Allow for bignums being
406 extended to the size of a .octa.
408 2010-09-08 Julian Brown <julian@codesourcery.com>
410 * config/tc-arm.c (create_neon_reg_alias): Deal with case
413 2010-09-08 Nick Clifton <nickc@redhat.com>
416 * config/tc-mn10300.c (md_convert_frag): Zero out top two bytes of
417 long call instruction's displacement.
419 2010-09-03 H.J. Lu <hongjiu.lu@intel.com>
422 * config/tc-i386.c (i386_finalize_immediate): Check flag_code
423 instead of use_rela_relocations for 64bit.
425 2010-09-02 Richard Henderson <rth@redhat.com>
427 * dw2gencfi.c (TC_DWARF2_EMIT_OFFSET): Provide default.
428 (output_fde): Use it. Make sure to fully init exp before using it.
430 2010-08-31 Kai Tietz <kai.tietz@onevision.com>
432 * config/obj-coff-seh.c (obj_coff_seh_save): Correct comparison.
433 (obj_coff_seh_stackalloc): Likewise.
435 2010-08-31 Alan Modra <amodra@gmail.com>
437 * config/obj-elf.c (obj_elf_init_stab_section): Fix assertion.
439 2010-08-30 Richard Henderson <rth@redhat.com>
441 * config/obj-coff-seh.c: Rewrite the entire file.
442 (symtab, symptr, reltab, relcount, relsize): Remove.
443 (seh_ctx_root, seh_ctx): Remove.
444 (xdata_seg, xdata_subseg, pdata_seg): New.
445 (switch_xdata, switch_pdata): New.
446 (verify_context, verify_context_and_target, skip_whitespace_and_comma):
447 New parsing functions. Rewrite all parsing functions to use them.
448 (obj_coff_seh_32): Fix != arm thinko.
449 (obj_coff_seh_handler): For x64, don't accept handler pointer here,
451 (obj_coff_seh_handlerdata): New.
452 (do_seh_endproc): Split out of ...
453 (obj_coff_seh_endproc): ... here.
454 (obj_coff_seh_proc): Use it, if needed.
455 (seh_x64_make_prologue_element): Use XRESIZEVEC, symbol_temp_new_now.
456 (seh_x64_read_reg): Remove mm_regs alternative. Tidy integer reg
457 alternatives. Don't slurp commas.
458 (seh_read_offset): Remove.
459 (obj_coff_seh_pushframe): Split out from obj_coff_seh_push.
460 (obj_coff_seh_scope): Remove.
461 (obj_coff_seh_save): Decide UWOP_SAVE_* vs _FAR immediately.
462 (obj_coff_seh_stackalloc): Decide _SMALL vs _LARGE immediately.
463 (out_one, out_two, out_four): New.
464 (seh_x64_write_prologue_data, seh_x64_size_prologue_data,
465 seh_x64_write_function_xdata, write_function_xdata): Rewrite
466 from seh_x64_write_xdata, seh_needed_unwind_info, seh_store_elm_data,
467 seh_getelm_data_size, seh_getsize_of_unwind_entry,
468 seh_make_unwind_entry, seh_getsize_unwind_data, and
469 seh_create_unwind_data.
470 (seh_arm_write_function_pdata): Rewrite from seh_arm_create_pdata.
471 (write_function_pdata): Rewrite from make_function_entry_pdata.
472 (seh_write_text_eh_data, make_function_entry_pdata,
473 seh_arm_create_pdata, seh_arm_write_pdata, seh_reloc, save_relocs,
474 seh_symbol_init, seh_symbol, quick_section, seh_emit_rva,
475 seh_emit_long, seh_make_globl, seh_make_section2, seh_make_section,
476 seh_make_xlbl_name, make_seh_text_label, seh_fill_pcsyms,
477 seh_needed_unwind_info, seh_store_elm_data, seh_getelm_data_size,
478 seh_getsize_of_unwind_entry, seh_make_unwind_entry,
479 seh_getsize_unwind_data, seh_create_unwind_data,
480 seh_make_function_entry_xdata, seh_x64_makescope_elem): Remove.
481 * config/obj-coff-seh.h (SEH_CMDS): Remove seh_savemm, seh_scope.
482 Add seh_handlerdata. Adjust function/what arguments for
483 seh_savereg, seh_pushframe, seh_stackalloc.
484 (struct seh_prologue_element): Adjust members to closer match
485 the elements of the UNWIND_CODE structure.
486 (struct seh_scope_elem): Remove.
487 (struct seh_context): Replace char* members with symbolS or
488 expressionS as appropriate. Sort members by ARM/x64 applicability.
489 Remove obsolete stuff wrt direct symbol and reloc manipulation.
491 2010-08-25 Alan Modra <amodra@gmail.com>
493 * NEWS: Mention ampersand in macro change.
495 2010-08-25 Gunther Nikl <gnikl@users.sourceforge.net>
497 * configure.tgt (m68k-*-aout): Change to bfd_gas=yes.
499 2010-08-25 Alan Modra <amodra@gmail.com>
501 * config/tc-d10v.c (do_assemble): Correctly detect overflow of
503 * config/tc-m68hc11.c (md_assemble): Likewise.
504 * config/tc-microblaze.c (md_assemble): Likewise. Correct cast
505 of is_end_of_line index.
507 2010-08-25 Jie Zhang <jie@codesourcery.com>
509 * config/tc-arm.c (encode_arm_addr_mode_2): Fix comment.
511 2010-08-25 Jie Zhang <jie@codesourcery.com>
513 * config/tc-arm.c (encode_arm_addr_mode_2): Fix
514 BAD_PC_ADDRESSING condition.
516 2010-08-20 Maciej W. Rozycki <macro@codesourcery.com>
518 * doc/c-arm.texi (ARM Options): Document -mfpu=fp4-sp-d16.
520 2010-08-19 H.J. Lu <hongjiu.lu@intel.com>
522 * config/tc-i386.c (VEX_check_operands): Fix a typo in comments.
524 2010-08-18 H.J. Lu <hongjiu.lu@intel.com>
526 * config/tc-i386.c (build_modrm_byte): Check i.imm_operands
529 2010-08-18 Alan Modra <amodra@gmail.com>
531 * macro.c (sub_actual): Add back ampersand suffix when no
533 (macro_expand_body): Correct comment.
535 2010-08-17 Roland McGrath <roland@redhat.com>
537 * config/obj-elf.c (obj_elf_parse_section_letters): Take new
538 boolean result parameter CLONE; set it if '?' flag letter seen.
539 (obj_elf_section): Update caller. Handle that flag by copying
540 the LINKONCE and GROUP_NAME state from NOW_SEG.
541 * doc/as.texinfo (Section): Document the ? flag.
543 2010-08-09 Cary Coutant <ccoutant@google.com>
545 * as.c (show_usage): Don't list --compress-debug-sections if zlib not
547 (main): Warn if --compress-debug-sections requested and zlib not
549 * doc/as.texinfo: Add --compress-debug-sections,
550 --nocompress-debug-sections.
552 2010-08-06 H.J. Lu <hongjiu.lu@intel.com>
554 * config/tc-i386.c (set_cpu_arch): Re-indent.
555 (md_parse_option): Likewise.
557 2010-08-06 Quentin Neill <quentin.neill@amd.com>
559 * config/tc-i386.c (arch_entry): Add negated bit to
560 disambiguate flag names starting with "no".
561 (cpu_arch): Add negated bit definitions. Add
562 ".nop" CPU extension.
563 (i386_align_code): Use new .cpunop bit to decide
564 when to generate alignment using nops.
565 (set_cpu_arch): Use negated bit instead to decide
566 when to use cpu_flags or vs. cpu_flags_and_not.
567 (md_parse_option): Likewise.
569 2010-08-04 H.J. Lu <hongjiu.lu@intel.com>
571 * config/tc-i386.c (match_template): Move the first i.error
574 2010-08-04 Alan Modra <amodra@gmail.com>
576 * configure.tgt (m32c): Set endian=little.
577 * config/tc-m32c.h (TARGET_BYTES_BIG_ENDIAN): Define as 0.
578 * config/tc-m32c.c (md_number_to_chars): Revert last change.
580 2010-08-03 Tristan Gingold <gingold@adacore.com>
582 * makefile.vms (OBJS): Add Add compress-debug.c.
584 2010-08-03 Alan Modra <amodra@gmail.com>
586 * config/tc-d10v.h (TARGET_BYTES_BIG_ENDIAN): Define as 1.
587 * config/tc-m32c.c (md_number_to_chars): Call bigendian
588 form of number_to_chars, not littleendian.
590 2010-08-02 Alan Modra <amodra@gmail.com>
592 * config/tc-d30v.c (d30v_cons_align): Don't align constants
595 2010-08-02 Alan Modra <amodra@gmail.com>
598 * expr.c (operand <'-' and '~'>): Widen bignums.
599 (operand <'!'>): Correct bignum result and convert to O_constant.
600 * read.c (emit_expr): Don't assert on .byte bignum. Don't display
601 bignum truncated warning for sign extended bignums.
603 2010-08-02 Alan Modra <amodra@gmail.com>
605 * config/tc-v850.c (md_assemble): Always pass format string to
607 (md_apply_fix): Similarly for as_warn_where.
609 2010-07-29 H.J. Lu <hongjiu.lu@intel.com>
611 * config/tc-i386-intel.c: Reformat.
613 2010-07-29 Alan Modra <amodra@gmail.com>
615 * config/tc-ppc.c (ppc_fix_adjustable): Add got reloc types used
618 2010-07-28 Alan Modra <amodra@gmail.com>
621 * symbols.c (symbol_clone): Correct typo in previous patch.
623 2010-07-28 Alan Modra <amodra@gmail.com>
626 * symbols.c (symbol_clone): Clear BSF_SECTION_SYM flag.
628 2010-07-28 Alan Modra <amodra@gmail.com>
630 * config/tc-ppc.c (md_assemble): Don't attempt to print NUL in
631 syntax error message.
633 2010-07-27 Maciej W. Rozycki <macro@codesourcery.com>
635 * config/tc-mips.c (mips16_macro_build): Pass "args" by
636 reference rather than value.
637 (macro_build): Update accordingly.
639 2010-07-27 Maciej W. Rozycki <macro@codesourcery.com>
641 * config/tc-mips.c (mips_ip): Use symbol_temp_new_now to create
644 2010-07-24 Maciej W. Rozycki <macro@codesourcery.com>
646 * config/tc-mips.c (macro)[M_JAL_1, M_JAL_2]: Handle the JALR
647 delay slot in the noreorder mode with the o32 ABI.
649 2010-07-23 Naveen.H.S <naveen.S@kpitcummins.com>
650 Ina Pandit <ina.pandit@kpitcummins.com>
652 * config/tc-v850.c: Update processor_mask.
653 (reg_name): Update the structure to use processors field.
654 (md_relax_table): Define SUBYPTE_COND_9_22, SUBYPTE_SA_9_22,
655 SUBYPTE_UNCOND_9_22, SUBYPTE_COND_9_22_32, SUBYPTE_SA_9_22_32,
656 SUBYPTE_UNCOND_9_22_32, SUBYPTE_COND_9_17_22,
657 SUBYPTE_SA_9_17_22, SUBYPTE_COND_9_17_22_32 and
658 SUBYPTE_SA_9_17_22_32.
659 (set_machine): Add support for V850E2 and V850E2V3.
660 (md_pseudo_table): Likewise.
661 (pre_defined_registers): Update pre defined registers suitable
662 for each family of registers.
663 (system_registers): Likewise.
664 (cc_names): Update the condition code.
665 (float_cc_names): Update the condition code for float.
666 (reg_name_search): Update based on current modifications.
667 (register_name): Likewise.
668 (system_register_name): Update to support new system registers
669 and supported families.
670 (cc_name): Update to support new condition codes.
671 (float_cc_name): New function to support float condition codes.
672 (parse_register_list): Update to support newly added registers.
673 (md_show_usage): Define support for V850E2 and V850E2V3 targets.
674 Also support added for disp-size-default-22, disp-size-default-32,
675 mextension, mno-bcond17 and mno-stld23.
676 (md_parse_option): Implement the support for above options defined
678 (md_convert_frag): Implement support for subtypes defined in
679 md_relax_table to support branch operations.
680 (md_begin): Add support for V850E2 and V850E2V3.
681 (handle_hi016, handle_hi16): new relocation handling functions
682 (handle_lo16, handle_ctoff, handle_sdaoff, handle_zdaoff,
683 handle_tdaoff): Updated relocation handling functions for newly
685 (v850_reloc_prefix): Update the relocation handling functions.
686 (v850_insert_operand): Updated the functions with error message
687 parameter and modified the function to use it.
688 (md_assemble): Update according to the latest modifications.
689 (md_apply_fix): Updated the functions with error message parameter
690 and modified the function to use it.
691 (v850_force_relocation): Update with newly added relocations.
692 * configure.tgt: Match all v850 targets.
693 * doc/c-v850.texi: Document the newly added targets.
696 2010-07-23 Alan Modra <amodra@gmail.com>
699 * macro.c (macro_expand): Recover gracefully from named args that
702 2010-07-22 Thomas Schwinge <thomas@codesourcery.com>
704 Switch MIPS to 32-bit DWARF format.
705 * config/tc-mips.h (DWARF2_FORMAT): Only define for [TE_IRIX].
706 * config/tc-mips.c (mips_dwarf2_format): Likewise.
708 2010-07-20 Alan Modra <amodra@gmail.com>
710 * config/tc-ppc.c (ppc_setup_opcodes): Add all macros for -many.
712 2010-07-16 Alan Modra <amodra@gmail.com>
714 * config/tc-rx.c (md_estimate_size_before_relax): Fix format
715 specifier warnings for 32-bit host when --enable-64-bit-bfd.
716 (rx_relax_frag, md_convert_frag): Likewise.
718 2010-07-15 Cary Coutant <ccoutant@google.com>
720 * gas/NEWS: Add note about --compress-debug-sections.
721 * gas/as.c (show_usage): Add --compress-debug-sections and
722 --nocompress-debug-sections.
724 2010-07-15 Rhonda Wittels <rhonda@codesourcery.com>
726 * config/obj-elf.c (get_sym_from_input_line_and_check): New
727 function to catch missing pseudo-op arguments.
728 (obj_elf_local): Call new function.
729 (obj_elf_weak): Likewise.
730 (obj_elf_visibility): Likewise.
731 (obj_elf_vtable_entry): Likewise.
732 (obj_elf_type): Likewise.
734 2010-07-15 Kai Tietz <kai.tietz@onevision.com>
736 * config/obj-coff-seh.c
737 (seh_getelm_data_size): New.
738 (seh_read_offset): Handle negative values.
739 (obj_coff_seh_push): Handle offset for save-register store.
740 (obj_coff_seh_setframe): Add unwind-information for frame.
741 (seh_store_elm_data): New.
742 (seh_getelm_data_size): Return additionally unaligned element count.
743 (seh_make_unwind_entry): Correct tweak about element count.
745 2010-07-12 H.J. Lu <hongjiu.lu@intel.com>
748 * config/tc-i386-intel.c (i386_intel_simplify): Restore fall
749 through patch for O_multiply.
751 2010-07-11 Kai Tietz <kai.tietz@onevision.com>
754 * config/obj-coff.c (obj_common_parse): Quote symbol-name.
756 2010-07-08 Tejas Belagod <tejas.belagod@arm.com>
758 * tc-arm.c (OP_oBARRIER): Remove.
759 (OP_oBARRIER_I15): Add.
760 (po_barrier_or_imm): Add macro.
761 (parse_operands): Improve OP_oBARRIER_I15 operand parsing.
762 (do_barrier): Check correct immediate range.
763 (do_t_barrier): Likewise.
764 (barrier_opt_names): Add entries for more symbolic operands.
765 (insns): Replace OP_oBARRIER with OP_oBARRIER_I15 for barriers.
767 2010-07-08 Daniel Gutson <dgutson@codesourcery.com>
769 * config/tc-arm.c (tc_gen_reloc): Add BFD_RELOC_ARM_T32_OFFSET_IMM
772 2010-07-06 Maciej W. Rozycki <macro@codesourcery.com>
774 * config/tc-mips.c (mips_frob_file): Use symbol_same_p to match
777 2010-07-06 Maciej W. Rozycki <macro@codesourcery.com>
779 * config/tc-mips.c (nops_for_insn_or_target): Replace
780 MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
781 MIPS16_INSN_COND_BRANCH.
783 2010-07-05 Jim Wilson <wilson@codesourcery.com>
787 * dwarf2dbg.c (dwarf2_finish): Don't generate .debug_line section
790 2010-07-05 Alan Modra <amodra@gmail.com>
792 * config/tc-moxie.c (md_apply_fix): Delete set but otherwise
795 2010-07-04 H.J. Lu <hongjiu.lu@intel.com>
797 * Makefile.am (CONFIG_OBJS): Removed.
798 (GENERIC_OBJS): Likewise.
800 * Makefile.in: Regenerated.
802 2010-07-03 Jan Beulich <jbeulich@novell.com>
805 * config/tc-i386.c (i386_finalize_displacement): Don't call
806 section_symbol() with expr_section.
808 2010-07-03 Cary Coutant <ccoutant@google.com>
810 * Makefile.am: Add compress-debug.c and compress-debug.h.
811 * Makefile.in: Regenerate.
812 * config.in: Add HAVE_ZLIB_H.
813 * configure.in: Check for zlib.h.
814 * configure: Regenerate.
816 * as.c (parse_args): Add --compress-debug-sections and
817 --nocompress-debug-sections.
818 * as.h (flag_compress_debug): New variable.
819 * compress-debug.c: New file.
820 * compress-debug.h: New file.
821 * write.c: Include compress-debug.h.
822 (compress_frag): New function.
823 (compress_debug): New function.
824 (write_object_file): Compress debug sections if requested.
826 2010-07-03 Andreas Schwab <schwab@linux-m68k.org>
828 * config/tc-ppc.c (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t
831 2010-07-03 Alan Modra <amodra@gmail.com>
833 * config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
834 (ppc_setup_opcodes): Likewise. Simplify opcode selection.
836 2010-07-02 DJ Delorie <dj@redhat.com>
838 * config/tc-rx.h (md_do_align): New.
839 (MAX_MEM_FOR_RS_ALIGN_CODE): New.
840 * config/tc-rx.c (nops): New.
841 (rx_handle_align): Use various sized nops to align code.
843 * config/tc-rx.c (rx_bytesT): Add grown/shrank counters for
845 (rx_relax_frag): Prevent infinite loops of grow/shrink/grow/etc.
847 2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
849 AVX Programming Reference (June, 2010)
850 * config/tc-i386.c (cpu_arch): Add .xsaveopt, .fsgsbase, .rdrnd
853 * doc/c-i386.texi: Document xsaveopt, fsgsbase, rdrnd and f16c.
855 2010-07-01 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
857 * config/tc-arm.c (do_t_mov_cmp): Fix reporting of unpredictable and
858 deprecated mov register instructions.
860 2010-07-01 Alan Modra <amodra@gmail.com>
862 * config/tc-ppc.c (toc_reloc_types): New variable.
863 (md_assemble): Set it.
864 (ppc_frob_file_before_adjust): Don't warn about toc section size
865 if we have large toc relocs and no small toc relocs.
867 2010-06-29 Alan Modra <amodra@gmail.com>
869 * config/tc-maxq.h: Delete file.
870 * config/tc-maxq.c: Delete file.
871 * Makefile.am: Remove references to maxq.
872 * configure.tgt: Likewise.
873 * config/obj-coff.h: Likewise.
874 * Makefile.in: Regenerate.
875 * configure: Regenerate.
876 * po/POTFILES.in: Regenerate.
878 2010-06-28 Alan Modra <amodra@gmail.com>
880 * config/obj-evax.h (S_SET_OTHER, S_SET_TYPE, S_SET_DESC): Don't define.
881 * config/tc-crx.c (gettrap): Constify arg.
882 (handle_LoadStor, get_cinv_parameters): Likewise.
883 (getreg_image): Fix enum warning
884 (md_assemble): Restore input line char.
885 * config/tc-hppa.c (tc_gen_reloc): Fix enum warning.
886 * config/tc-i960.c (mem_fmt): Rename var to fix shadow warning.
887 * config/tc-sh.c (sh_fdpic): Only define when OBJ_ELF.
888 (build_Mytes): Fix build failure for non-elf targets.
889 * config/tc-tic4x.c (tic4x_eval): Restore terminator char.
890 * config/tc-xtensa.c (xtensa_end_directive): Fix switch enum warning.
892 * cgen.c (gas_cgen_md_apply_fix): Avoid set but unused warning.
893 * ecoff.c (add_ecoff_symbol): Likewise.
894 * itbl-ops.c (append_insns_as_macros): Likewise.
895 * listing.c (debugging_pseudo): Likewise.
896 * read.c (s_mri_common, stringer): Likewise.
897 * config/obj-coff.c (coff_frob_section): Likewise.
898 * config/tc-alpha.c (emit_ldgp, s_alpha_proc): Likewise.
899 * config/tc-arm.c (my_get_expression): Likewise.
900 * config/tc-hppa.c (process_exit, pa_type_args): Likewise.
901 * config/tc-m32c.c (md_assemble): Likewise.
902 * config/tc-microblaze.c (md_convert_frag): Likewise.
903 * config/tc-mips.c (s_change_section): Likewise.
904 * config/tc-mt.c (mt_fix_adjustable): Likewise.
905 * config/tc-xtensa.c (xtensa_literal_pseudo): Likewise.
907 * config/obj-aout.c (obj_aout_frob_symbol): Delete set but otherwise
909 * config/tc-alpha.c (load_expression): Likewise.
910 (s_alpha_rdata, s_alpha_section, s_alpha_prologue): Likewise.
911 * config/tc-arm.c (parse_neon_el_struct_list): Likewise.
912 * config/tc-avr.c (extract_word): Likewise.
913 * config/tc-cris.c (cris_get_expression): Likewise.
914 * config/tc-d30v.c (build_insn, find_format): Likewise.
915 * config/tc-dlx.c (machine_ip): Likewise.
916 * config/tc-hppa.c (pa_get_absolute_expression): Likewise.
917 * config/tc-i370.c (md_assemble): Likewise.
918 * config/tc-i960.c (brtab_emit): Likewise.
919 * config/tc-iq2000.c (s_iq2000_ent): Likewise.
920 * config/tc-m32c.c (md_convert_frag): Likewise.
921 * config/tc-m68hc11.c (fixup24, build_jump_insn): Likewise.
922 (md_estimate_size_before_relax, md_apply_fix): Likewise.
923 * config/tc-m68k.c (md_show_usage): Likewise.
924 * config/tc-microblaze.c (microblaze_s_lcomm): Likewise.
925 * config/tc-mips.c (s_mips_end): Likewise.
926 * config/tc-mmix.c (mmix_byte, mmix_cons): Likewise.
927 * config/tc-mn10300.c (md_assemble): Likewise.
928 * config/tc-msp430.c (extract_word): Likewise.
929 * config/tc-mt.c (md_assemble): Likewise.
930 * config/tc-or32.c (machine_ip): Likewise.
931 * config/tc-pj.c (md_apply_fix): Likewise.
932 * config/tc-s390.c (md_gather_operands): Likewise.
933 * config/tc-sh.c (sh_cons_align): Likewise.
934 * config/tc-sparc.c (sparc_cons_align): Likewise.
935 * config/tc-tic4x.c (tic4x_sect): Likewise.
936 * config/tc-tic54x.c (tic54x_stringer): Likewise.
937 * config/tc-vax.c (vip_op): Likewise.
938 * config/tc-xstormy16.c (xstormy16_cons_fix_new): Likewise.
939 * config/tc-xtensa.c (md_assemble): Likewise.
940 (xtensa_fix_short_loop_frags, convert_frag_immed): Likewise.
941 (xtensa_move_literals): Likewise.
943 2010-06-28 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
945 * config/tc-arm.c (parse_neon_alignment): New function.
946 (parse_address_main): Fix Neon load/store alignment parsing.
948 2010-06-22 Jan Beulich <jbeulich@novell.com>
950 * config/tc-i386-intel.c (i386_intel_parse_name): Handle pseudo
952 (i386_intel_operand): Remove bogus handling of pseudo symbols
954 * expr.c (current_location): Remove 'static' and local
956 * expr.h (current_location): Declare.
958 2010-06-21 Sterling Augustine <sterling@tensilica.com>
961 * as.c: Globalize keep_it.
962 (main): Remove keep_it. Move conditional from here...
963 (close_output_file): ...to here.
965 2010-06-21 Andreas Schwab <schwab@redhat.com>
967 * doc/as.texinfo (Overview): Use @itemx for grouped @table
969 * doc/c-alpha.texi (Alpha Options): Likewise.
970 * doc/c-arm.texi (ARM Directives): Likewise.
971 * doc/c-bfin.texi (Blackfin Options): Likewise.
972 * doc/c-d10v.texi (D10V-Opts): Likewise.
973 * doc/c-i386.texi (i386-Options): Likewise.
974 * doc/c-ia64.texi (IA-64 Options): Likewise.
975 * doc/c-m68k.texi (M68K-Opts): Likewise.
976 * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
977 * doc/internals.texi (Symbols): Likewise.
979 2010-06-21 Alan Modra <amodra@gmail.com>
982 * config/tc-sh.c (find_cooked_opcode): Correct array bounds check.
984 2010-06-18 Joseph Myers <joseph@codesourcery.com>
986 * config/tc-tic6x.h (tic6x_segment_info_type): Add field
988 * config/tc-tic6x.c (tic6x_cons_align: Clear func_units_used.
989 (md_assemble): Clear func_units_used for new execute packet.
990 Check for duplicate functional units and update func_units_used
991 for instructions using a functional unit.
993 2010-06-15 Joseph Myers <joseph@codesourcery.com>
995 * config/tc-tic6x.c: Include elf/tic6x.h.
996 (tic6x_arch_attribute, tic6x_seen_insns): New.
997 (tic6x_arch_table, tic6x_arches): Add attribute values.
998 (tic6x_use_arch): Handle attribute settings.
999 (tic6x_attributes_set_explicitly, s_tic6x_c6xabi_attribute,
1000 tic6x_attribute_table, tic6x_attributes,
1001 tic6x_convert_symbolic_attribute): New.
1002 (md_pseudo_table): Add c6xabi_attribute.
1003 (md_assemble): Set tic6x_seen_insns and tic6x_arch_attribute.
1004 (tic6x_set_attribute_int, tic6x_set_attributes): New.
1005 (tic6x_end): Call tic6x_set_attributes.
1006 * config/tc-tic6x.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
1007 (tic6x_convert_symbolic_attribute): Declare.
1009 2010-06-14 Alan Modra <amodra@gmail.com>
1011 * config/tc-ppc.c (md_assemble): Emit APUinfo section for
1014 2010-06-11 Jan Beulich <jbeulich@novell.com>
1016 * config/tc-i386.c (md_parse_option): Ignore impossible processor
1018 (show_arch): New parameter 'check'.
1019 (md_show_usage): Adjust calls to show_arch().
1021 2010-06-10 H.J. Lu <hongjiu.lu@intel.com>
1023 * config/tc-i386.c (update_code_flag): New.
1024 (set_code_flag): Use it.
1025 (i386_target_format): Replace set_code_flag with update_code_flag.
1027 2010-06-10 Tristan Gingold <gingold@adacore.com>
1029 * config/obj-som.h: Includes som/reloc.h
1031 2010-06-10 Jan Beulich <jbeulich@novell.com>
1033 * config/tc-i386.c (cpu_arch): Add comment.
1034 (i386_target_format): Set cpu_arch_isa_flags and cpu_arch_tune_flags
1035 from the generic entries of cpu_arch[].
1037 2010-06-08 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1039 * config/tc-arm.c (operand_parse_code): Add OP_RRnpctw enum
1041 (parse_operands): Add support for OP_RRnpctw.
1042 (insns): Update floating-point load/store multiples so the
1043 first register is of type OP_RRnpctw.
1045 2010-06-08 Quentin Neill <quentin.neill@amd.com>
1047 * config/tc-i386.c (pi): Rename local loop counter
1048 variable i that shadows global static i386_insn i
1049 when DEBUG386 is defined.
1052 2010-06-08 Nick Clifton <nickc@redhat.com>
1054 * doc/as.texinfo: Replace abbreviated 20th century year numbers
1057 2010-06-02 Quentin Neill <quentin.neill@amd.com>
1059 * config/tc-i386.c (OPTION_MAVXSCALAR): Fix define.
1061 2010-06-02 Tristan Gingold <gingold@adacore.com>
1063 * as.h: Remove conditionnal definition of HAVE_STDARG_H,
1064 USE_STDARG, va_alist, va_dcl, va_list, va_start, va_end.
1065 Remove conditionnal inclusion of stdarg.h and varargs.h.
1067 * config.in: Regenerate.
1068 * configure: Regenerate.
1069 * configure.in: Remove stdarg.h and varargs.h from
1070 AC_CHECK_HEADERS list.
1071 * messages.c (as_tsktsk): Remove non ISO C version.
1072 (as_warn, as_warn_where, as_bad, as_bad_where, as_fatal): Ditto.
1074 2010-05-31 Tristan Gingold <gingold@adacore.com>
1076 * config/tc-alpha.c: Add comments for evax.
1077 * config/obj-evax.c: Ditto.
1079 2010-05-28 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1081 * config/tc-arm.c (do_t_mov_cmp): In unified syntax encode movs as
1084 2010-05-27 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1086 * config/tc-arm.c (encode_thumb2_ldmstm): Make warning about
1087 writeback when base register is in register list an error, and
1089 (do_t_ldmstm): Change warnings.
1091 2010-05-26 Catherine Moore <clm@codesourcery.com>
1093 * config/tc-mips.c (is_opcode_valid): Remove expansionp.
1094 (macro_build): Change invocation of is_opcode_valid.
1095 (mips_ip): Likewise.
1097 2010-05-25 Nick Clifton <nickc@redhat.com>
1099 * Makefile.am (MOSTLYCLEANFILES): Fix typo.
1100 * Makefile.in: Regenerate.
1102 2010-05-25 Daniel Jacobowitz <dan@codesourcery.com>
1103 Joseph Myers <joseph@codesourcery.com>
1104 Andrew Stubbs <ams@codesourcery.com>
1106 * config/tc-sh.c (sh_fdpic): New.
1107 (sh_check_fixup): Handle relocations on movi20.
1108 (parse_exp): Do not reject PIC operators here.
1109 (build_Mytes): Check for unhandled PIC operators here. Use
1110 sh_check_fixup for movi20.
1111 (enum options): Add OPTION_FDPIC.
1112 (md_longopts, md_parse_option, md_show_usage): Add --fdpic.
1113 (sh_fix_adjustable, md_apply_fix): Handle FDPIC and movi20 relocations.
1114 (sh_elf_final_processing): Handle --fdpic.
1115 (sh_uclinux_target_format): New.
1116 (sh_parse_name): Handle FDPIC relocation operators.
1117 * config/tc-sh.h (TARGET_FORMAT): Define specially for TE_UCLINUX.
1118 (sh_uclinux_target_format): Declare for TE_UCLINUX.
1119 * configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): Set
1121 * doc/c-sh.texi (SH Options): Document --fdpic.
1123 2010-05-25 Jay Krell <jay.krell@cornell.edu>
1126 * Makefile.am: Replace all occurences of .o with .@OBJEXT@
1127 * Makefile.in: Regenerate.
1129 2010-05-25 Alan Modra <amodra@gmail.com>
1131 * config/tc-ppc.c (ppc_section_flags): Add ATTRIBUTE_UNUSED to "attr".
1133 2010-05-19 Nick Clifton <nickc@redhat.com>
1135 * config/tc-h8300.c (h8300_elf_section): Add .zdebug to the list
1136 of known section prefixes.
1138 2010-05-18 H.J. Lu <hongjiu.lu@intel.com>
1141 * obj-elf.c (obj_elf_change_section): Handle SHF_EXCLUDE.
1142 (obj_elf_parse_section_letters): Likewise.
1143 (obj_elf_section_word): Likewise.
1145 * config/tc-ppc.c (ppc_section_letter): Removed.
1146 (ppc_section_word): Likewise.
1147 * config/tc-ppc.h (ppc_section_letter): Likewise.
1148 (ppc_section_word): Likewise.
1149 (md_elf_section_letter): Likewise.
1150 (md_elf_section_word): Likewise.
1152 * doc/as.texinfo: Document `e' and `#exclude'.
1154 2010-05-13 Nathan Sidwell <nathan@codesourcery.com>
1156 * config/tc-arm.c (md_assemble): Clarify current mode in error
1157 messages about unsupported instructions.
1158 (UT): Delete #define.
1159 (insns): Adjust cbnz, cbz appropriately.
1161 2010-05-11 Andrew Stubbs <ams@codesourcery.com>
1163 * config/tc-arm.c (aeabi_set_public_attributes): Set Tag_DIV_use.
1165 2010-05-11 Jie Zhang <jie@codesourcery.com>
1167 * config/tc-arm.c (aeabi_set_public_attributes): Set
1168 Tag_ABI_HardFP_use to 1 if a single precision FPU is selected.
1170 2010-05-07 Tristan Gingold <gingold@adacore.com>
1172 * Makefile.in: Regenerate with automake 1.11.1.
1173 * aclocal.m4: Ditto.
1174 * doc/Makefile.in: Ditto.
1176 2010-05-05 Nick Clifton <nickc@redhat.com>
1178 * po/es.po: Updated Spanish translation.
1180 2010-05-05 Julian Brown <julian@codesourcery.com>
1182 * read.c (cons_worker): Detect and reject unexpected string argument.
1184 2010-05-04 Nick Clifton <nickc@redhat.com>
1186 * write.c (fixup_segment): Revert previous delta.
1187 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Also force the
1188 generation of relocations for fixups against weak symbols.
1190 2010-04-29 Nathan Sidwell <nathan@codesourcery.com>
1192 * write.c (fixup_segment): Do not assume we know the section a
1193 defined weak symbol is in.
1194 * config/tc-arm.c (relax_adr, relax_branch, md_apply_fix): Treat
1195 weak symbols as not known to be in the same section, even if they
1198 2010-04-27 Joseph Myers <joseph@codesourcery.com>
1200 * config/tc-tic6x.h (tic6x_label_list): New.
1201 (tic6x_segment_info_type): Keep a list of labels and a current
1202 frag instead of a boolean for whether labels seen and a count of
1204 (tic6x_frag_info, TC_FRAG_TYPE, TC_FRAG_INIT, tic6x_frag_init,
1205 md_do_align, tic6x_do_align, md_end, tic6x_end): New.
1206 * config/tc-tic6x.c (tic6x_frob_label): Put label on list.
1207 (tic6x_cleanup): Correct comment.
1208 (tic6x_free_label_list): New.
1209 (tic6x_cons_align): Free label list and update for
1210 tic6x_segment_info_type changes.
1211 (tic6x_do_align): New.
1212 (md_assemble): Handle list of labels and saved frag for execute
1213 packet. Create machine-dependent frag for new execute packet and
1214 adjust labels accordingly.
1215 (tic6x_adjust_section, tic6x_frag_init, tic6x_end): New.
1216 (md_convert_frag, md_estimate_size_before_relax): Update comments.
1218 2010-04-24 H.J. Lu <hongjiu.lu@intel.com>
1221 * config/tc-i386-intel.c (intel_state): Add is_indirect.
1222 (i386_intel_operand): Initialize intel_state.is_indirect. Check
1223 intel_state.is_indirect for "call|jmp [symbol]".
1225 2010-04-22 Nick Clifton <nickc@redhat.com>
1227 * po/gas.pot: Updated by the Translation project.
1229 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
1231 * config/tc-i386.c (i386_is_register): Removed.
1232 (x86_cons): Don't use i386_is_register.
1233 (parse_register): Likewise.
1234 * config/tc-i386-intel.c (i386_intel_simplify): Likewise.
1235 (i386_intel_operand): Likewise.
1237 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
1239 * config/tc-i386.c (tc_x86_parse_to_dw2regnum): Don't use
1242 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
1244 * config/tc-i386.c (i386_is_register): Remove is_intel_syntax.
1245 (x86_cons): Updated.
1246 (parse_register): Likewise.
1247 (tc_x86_parse_to_dw2regnum): Likewise.
1248 * config/tc-i386-intel.c (i386_intel_simplify): Likewise.
1249 (i386_intel_operand): Likewise.
1251 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
1254 * config/tc-i386-intel.c (i386_intel_simplify_register): New.
1255 (i386_intel_simplify): Use i386_is_register and
1256 i386_intel_simplify_register. Set X_md for O_register and
1257 check X_md for O_constant.
1258 (i386_intel_operand): Use i386_is_register.
1260 * config/tc-i386.c (i386_is_register): New.
1261 (x86_cons): Initialize the X_md field. Use i386_is_register.
1262 (parse_register): Use i386_is_register.
1263 (tc_x86_parse_to_dw2regnum): Likewise.
1265 2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
1267 * expr.c (expr): Initialize the X_md field.
1269 2010-04-20 Joseph Myers <joseph@codesourcery.com>
1271 * config/tc-tic6x.c (OPTION_MGENERATE_REL): New.
1272 (md_longopts): Add -mgenerate-rel.
1273 (tic6x_generate_rela): New.
1274 (md_parse_option): Handle -mgenerate-rel.
1275 (md_show_usage): Add comment that -mgenerate-rel is undocumented.
1276 (tic6x_init_after_args): New.
1277 (md_apply_fix): Correct shift calculations for SB-relative
1279 (md_pcrel_from): Change to tic6x_pcrel_from_section. Do not
1280 adjust addresses for relocations referencing symbols in other
1282 (tc_gen_reloc): Adjust addend calculations for REL relocations.
1283 * config/tc-tic6x.h (MD_PCREL_FROM_SECTION,
1284 tic6x_pcrel_from_section, tc_init_after_args,
1285 tic6x_init_after_args): New.
1287 2010-04-20 Nick Clifton <nickc@redhat.com>
1290 * macro.c (macro_expand_body): Do not treat LOCAL as a keyword in
1291 altmacro mode if found inside a quoted string.
1293 2010-04-20 Mike Frysinger <vapier@gentoo.org>
1295 * config/bfin-lex.l (parse_int): Change index() to strchr().
1297 2010-04-16 Nick Clifton <nickc@redhat.com>
1300 * config/tc-hppa.c (pa_ip): Do not allow 64-bit add condition
1301 matcher to accept and unconditional 32-bit add instruction.
1302 (pa_build_unwind_subspace): Cope with error conditions not
1303 allowing the start symbol to be set.
1305 2010-04-15 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1307 * config/tc-arm.c (arm_convert_symbolic_attribute): Add support for
1308 new tag names in v2.08 of ARM ABI.
1309 * doc/c-arm.texi: Document new tag names in ABI.
1311 2010-04-14 Tristan Gingold <gingold@adacore.com>
1313 * config/tc-alpha.c: Includes vms/egps.h on EVAX.
1314 (s_alpha_comm): Used new EGPS macros from egps.h
1315 (RGPS__V_NO_SHIFT, EGPS__V_MASK): New local macros.
1316 (s_alpha_section_word): Add comments. Use new EGPS macros.
1317 Adjust for modified bfd_vms_set_section_flags function.
1319 2010-04-10 Alan Modra <amodra@gmail.com>
1322 * config/tc-ppc.c (ppc_elf_cons): Clear frag contents.
1324 2010-04-09 Nick Clifton <nickc@redhat.com>
1326 * as.c (create_obj_attrs_section): Remove unused variable addr.
1327 * listing.c (listing_listing): Remove unused variable message.
1328 * read.c: Remove unnecessary register type qualifiers.
1329 (s_mri): Only define/use old_flag variable if MRI_MODE_CHANGE is
1332 2010-04-07 Eric B. Weddington <eric.weddington@atmel.com>
1334 * config/tc-avr.c (mcu_types): Add support for atmega16a, atmega168a,
1335 atmega164a, atmega165a, atmega169a, atmega169pa, atmega16hva2,
1336 atmega324a, atmega324pa, atmega325a, atmega3250a, atmega328,
1337 atmega329a, atmega329pa, atmega3290a, atmega48a, atmega644a,
1338 atmega645a, atmega645p, atmega6450a, atmega6450p, atmega649a,
1339 atmega649p, atmega6490a, atmega6490p, atmega64hve, atmega88a,
1340 atmega88pa, attiny461a, attiny84a, m3000.
1341 Remove support for atmega8m1, atmega8c1, atmega16c1, atmega4hvd,
1342 atmega8hvd, attiny327, m3000f, m3000s, m3001b.
1343 * doc/c-avr.texi: Same.
1345 2010-04-07 Jie Zhang <jie@codesourcery.com>
1347 * config/tc-arm.c (make_mapping_symbol): Handle the case
1348 that multiple mapping symbols have the same value 0.
1350 2010-04-07 Alan Modra <amodra@gmail.com>
1352 * configure: Regenerate.
1354 2010-04-06 Nick Clifton <nickc@redhat.com>
1356 * po/ru.po: New Russian translation.
1357 * configure.in (ALL_LINGUAS): Add ru.
1358 * configure: Regenerate.
1360 2010-03-30 H.J. Lu <hongjiu.lu@intel.com>
1363 * input-scrub.c (input_scrub_next_buffer): Use memmove instead
1364 of memcpy to copy overlap memory.
1366 2010-03-25 Joseph Myers <joseph@codesourcery.com>
1368 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
1369 (TARGET_CPU_HFILES): Add config/tc-tic6x.h.
1370 * Makefile.in: Regenerate.
1371 * NEWS: Add news entry for TI C6X support.
1372 * app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle
1373 TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in
1374 operands if TC_KEEP_OPERAND_SPACES.
1375 * configure.tgt (tic6x-*-*): New.
1376 * config/tc-ia64.h (TC_PREDICATE_START_CHAR,
1377 TC_PREDICATE_END_CHAR): Define.
1378 * config/tc-tic6x.c, config/tc-tic6x.h: New.
1379 * doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
1380 * doc/Makefile.in: Regenerate.
1381 * doc/all.texi (TIC6X): Define.
1382 * doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi.
1383 * doc/c-tic6x.texi: New.
1385 2010-03-22 H.J. Lu <hongjiu.lu@intel.com>
1387 * config/tc-i386.c (lex_got): Use STRING_COMMA_LEN on gotrel.
1389 2010-03-21 H.J. Lu <hongjiu.lu@intel.com>
1391 * config/tc-i386.c (i386_error): Replace oprand_size_mismatch
1392 with operand_size_mismatch.
1393 (operand_size_match): Updated.
1394 (match_template): Likewise.
1396 2010-03-21 H.J. Lu <hongjiu.lu@intel.com>
1398 * config/tc-i386.c (i386_error): New.
1399 (_i386_insn): Replace err_msg with error.
1400 (operand_size_match): Set error instead of err_msg on failure.
1401 (operand_type_match): Likewise.
1402 (operand_type_register_match): Likewise.
1403 (VEX_check_operands): Likewise.
1404 (match_template): Likewise. Use error instead of err_msg with
1407 2010-03-19 Jie Zhang <jie@codesourcery.com>
1409 * config/tc-arm.c (make_mapping_symbol): Hanle the case
1410 that two mapping symbols have the same value.
1412 2010-03-18 Daniel Jacobowitz <dan@codesourcery.com>
1414 * doc/c-arm.texi (.setfp): Correct example.
1416 2010-03-18 Wei Guozhi <carrot@google.com>
1419 * config/tc-arm.c (reloc_names): New relocation names.
1420 (md_apply_fix): New case for BFD_RELOC_ARM_GOT_PREL.
1421 (tc_gen_reloc): New case for BFD_RELOC_ARM_GOT_PREL.
1422 * doc/c-arm.texi (ARM-Relocations): Document the new relocation.
1424 2010-03-15 Thomas Schwinge <thomas@codesourcery.com>
1426 * dw2gencfi.c (output_cie): Consider emitting the S augmentation in all
1427 cases, and not only for .eh_frame.
1429 * dw2gencfi.c (output_cie): Make it more explicit which code paths
1430 belong to .eh_frame only.
1432 2010-03-13 Segher Boessenkool <segher@kernel.crashing.org>
1434 * config/tc-v850.c (v850_insert_operand): Handle out-of-range
1435 assembler constants on 64-bit hosts.
1437 2010-03-10 Mike Frysinger <michael.frysinger@analog.com>
1439 * bfin-defs.h, bfin-lex.l, bfin-parse.y, tc-bfin.c, tc-bfin.h:
1440 Strip trailing whitespace.
1442 2010-03-10 Mike Frysinger <michael.frysinger@analog.com>
1444 * doc/c-bfin.texi (-mcpu): Add bf504 and bf506.
1445 * config/tc-bfin.c (bfin_cpu_type): Add BFIN_CPU_BF504 and
1447 (bfin_cpus[]): Add 0.0 for bf504 and bf506.
1449 2010-03-10 Jie Zhang <jie@codesourcery.com>
1451 * doc/as.texinfo: Add Blackfin options.
1452 * doc/c-bfin.texi: Document -mfdpic, -mno-fdpic and -mnopic.
1453 * config/tc-bfin.c (md_show_usage): Show usage for all
1454 Blackfin specific options.
1456 2010-03-09 Alan Modra <amodra@gmail.com>
1459 * listing.c (listing_newline): Correct backslash quote logic.
1461 2010-03-08 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
1463 * config/tc-i386.h [TE_SOLARIS] (ELF_TARGET_FORMAT): Define.
1464 (ELF_TARGET_FORMAT64): Define.
1466 2010-03-05 Paul Brook <paul@codesourcery.com>
1468 * config/tc-arm.c (arm_cpu_option_table): Add cortex-m4.
1470 2010-03-02 Andrew Stubbs <ams@codesourcery.com>
1472 * config/tc-sh.c (get_specific): Move overflow checking code to avoid
1473 reading uninitialized data.
1475 2010-03-01 Tristan Gingold <gingold@adacore.com>
1477 * config/tc-score7.c (s7_frag_check): Add ATTRIBUTE_UNUSED.
1479 2010-02-26 Doug Evans <dje@sebabeach.org>
1481 * configure.tgt: Fix mep cpu case.
1483 2010-02-26 Jie Zhang <jie@codesourcery.com>
1485 * config/tc-arm.c (do_t_strexd): Remove
1486 operand[1] != operand[2] contraint.
1488 2010-02-26 Jie Zhang <jie@codesourcery.com>
1490 * config/tc-arm.c (neon_select_shape): No need to match
1491 the remaining operands in the shape when one operand does
1494 2010-02-26 Jie Zhang <jie@codesourcery.com>
1496 * config/tc-arm.c (do_neon_ld_st_interleave): Reject bad
1499 2010-02-25 Doug Evans <dje@sebabeach.org>
1501 * cgen.c: Whitespace fixes.
1502 (weak_operand_overflow_check): Formatting fix.
1504 2010-02-25 H.J. Lu <hongjiu.lu@intel.com>
1506 * config/tc-i386.c (match_template): Update error messages.
1508 2010-02-25 H.J. Lu <hongjiu.lu@intel.com>
1510 * config/tc-i386.c (_i386_insn): Add err_msg.
1511 (operand_size_match): Set err_msg on failure.
1512 (operand_type_match): Likewise.
1513 (operand_type_register_match): Likewise.
1514 (VEX_check_operands): Likewise.
1515 (match_template): Likewise. Use i.err_msg with as_bad.
1517 2010-02-25 Wu Zhangjin <wuzhangjin@gmail.com>
1519 * config/tc-mips.c (mips_fix_loongson2f, mips_fix_loongson2f_nop,
1520 mips_fix_loongson2f_jump): New variables.
1521 (md_longopts): Add New options -mfix-loongson2f-nop/jump,
1522 -mno-fix-loongson2f-nop/jump.
1523 (md_parse_option): Initialize variables via above options.
1524 (options): New enums for the above options.
1525 (md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
1526 (fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
1528 (append_insn): call fix_loongson2f().
1529 (mips_handle_align): Replace the implicit nops.
1530 * config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
1531 for the new mips_handle_align().
1532 * doc/c-mips.texi: Document the new options.
1534 2010-02-23 Daniel Gutson <dgutson@codesourcery.com>
1536 * config/tc-arm.c (do_rd_rm_rn): Added warning
1539 2010-02-23 Andrew Zabolotny <anpaza@mail.ru>
1542 * config/tc-avr.c (md_apply_fix): Handle BFD_RELOC_8.
1543 (avr_cons_fix_new): Handle fixups of a single byte.
1545 2010-02-22 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1548 * config/tc-arm.c (CPU_DEFAULT): Do not define based upon build
1549 compiler's predefines.
1551 2010-02-19 Alan Modra <amodra@gmail.com>
1553 * configure.tgt: Whiltespace. Sort moxie entry.
1555 2010-02-18 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1557 * config/tc-arm.c (arm_convert_symbolic_attribute): Add Tag_DIV_use.
1558 * doc/c-arm.texi: Likewise.
1560 2010-02-12 Daniel Gutson <dgutson@codesourcery.com>
1562 * config/tc-arm.c (asm_opcode): operands type
1564 (BAD_PC_ADDRESSING): New macro message.
1565 (BAD_PC_WRITEBACK): Likewise.
1566 (MIX_ARM_THUMB_OPERANDS): New macro.
1567 (operand_parse_code): Added enum values.
1568 (parse_operands): Added thumb/arm distinction,
1569 plus new enum values handling.
1570 (encode_arm_addr_mode_2): Validations enhanced.
1571 (encode_arm_addr_mode_3): Likewise.
1572 (do_rm_rd_rn): Likewise.
1573 (encode_thumb32_addr_mode): Likewise.
1574 (do_t_ldrex): Likewise.
1575 (do_t_ldst): Likewise.
1576 (do_t_strex): Likewise.
1577 (md_assemble): Call parse_operands with
1585 (insns): Updated insns operands.
1587 2010-02-12 Tristan Gingold <gingold@adacore.com>
1588 Douglas B Rupp <rupp@gnat.com>
1590 * config/tc-ia64.c (enum reloc_func): Add FUNC_SLOTCOUNT_RELOC.
1591 (DUMMY_RELOC_IA64_SLOTCOUNT): Added.
1592 (pseudo_func): Add an entry for slotcount.
1593 (md_begin): Initialize slotcount pseudo symbol.
1594 (ia64_parse_name): Handle @slotcount parameter.
1595 (ia64_gen_real_reloc_type): Handle slotcount.
1596 (md_apply_fix): Ditto.
1597 * doc/c-ia64.texi (IA-64-Relocs): Document @slotcount.
1599 2010-02-11 Sterling Augustine <sterling@jaw.hq.tensilica.com>
1601 * config/tc-xtensa.c (istack_init): Don't call memset.
1603 2010-02-11 Sterling Augustine <sterling@tensilica.com>
1605 * config/tc-xtensa.c (cache_literal_section): Handle prefixes as
1608 2010-02-11 Sterling Augustine <sterling@tensilica.com>
1610 * config/tc-xtensa.c (xtensa_find_unaligned_loops): Rewrite.
1612 2010-02-11 H.J. Lu <hongjiu.lu@intel.com>
1614 * config/tc-i386.c (build_modrm_byte): Reformat.
1616 2010-02-11 H.J. Lu <hongjiu.lu@intel.com>
1618 * config/tc-i386.c: Update copyright.
1620 2010-02-10 Quentin Neill <quentin.neill@amd.com>
1621 Sebastian Pop <sebastian.pop@amd.com>
1623 * config/tc-i386.c (vec_imm4) New operand type.
1624 (fits_in_imm4): New.
1625 (VEX_check_operands): New.
1626 (check_reverse): Call VEX_check_operands.
1627 (build_modrm_byte): Reintroduce code for 5
1628 operand insns. Fix whitespace.
1630 2010-02-10 Richard Sandiford <r.sandiford@uk.ibm.com>
1632 * config/tc-ppc.c (md_show_usage): Add -mpwr4, -mpwr5, -mpwr5x,
1635 2010-02-09 Sterling Augustine <sterling@tensilica.com>
1637 * config/tc-xtensa.c (RELAXED_LOOP_INSN_BYTES): New.
1638 (next_frag_pre_opcode_bytes): Use RELAXED_LOOP_INSN_BYTES.
1639 (xtensa_mark_zcl_first_insns): Rewrite to handle corner case.
1641 2010-02-08 Christophe Lyon <christophe.lyon@st.com>
1643 * config/tc-arm.c (md_pcrel_from_section): Keep base to zero for
1644 non-local branches (BFD_RELOC_THUMB_PCREL_BRANCH23,
1645 BFD_RELOC_THUMB_PCREL_BLX, BFD_RELOC_ARM_PCREL_BLX,
1646 BFD_RELOC_ARM_PCREL_CALL)
1648 2010-02-08 Sterling Augustine <sterling@tensilica.com>
1650 * config/tc-xtensa.c (frag_format_size): Generalize logic to
1651 handle more instruction sizes and fetch widths.
1652 (branch_align_power): Likewise.
1653 (text_align_power): Likewise.
1654 (bytes_to_stretch): Likewise.
1656 2010-02-08 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1658 * config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
1659 (ppc_mach): Handle titan.
1660 * doc/c-ppc.texi: Mention -mtitan.
1662 2010-02-05 Sterling Augustine <sterling@tensilica.com>
1664 * config/tc-xtensa.c (UNREACHABLE_MAX_WIDTH): Delete and
1666 (xtensa_fetch_width) ...this.
1668 2010-02-05 Joseph Myers <joseph@codesourcery.com>
1670 * Makefile.am (CPU_TYPES, OBJ_FORMATS, CPU_OBJ_VALID,
1671 MULTI_CPU_TYPES, MULTI_CPU_OBJ_VALID): Remove.
1672 * Makefile.in: Regenerate.
1674 2010-02-03 Quentin Neill <quentin.neill@amd.com>
1676 * config/tc-i386.c (cpu_arch): Change amdfam15 to bdver1.
1677 (i386_align_code): Rename PROCESSOR_AMDFAM15 to PROCESSOR_BDVER1.
1678 * config/tc-i386.h (processor_type): Same.
1679 * doc/c-i386.texi: Change amdfam15 to bdver1.
1681 2010-01-29 Nick Clifton <nickc@redhat.com>
1684 * config/tc-arm.c (neon_check_type): Handle a neon_shape value of
1687 2010-01-27 Dave Korn <dave.korn.cygwin@gmail.com>
1689 * NEWS: Mention new feature.
1690 * config/obj-coff.c (obj_coff_section): Accept digits and use
1691 to override default section alignment power if specified.
1692 * doc/as.texinfo (.section directive): Update documentation.
1694 2010-01-27 H.J. Lu <hongjiu.lu@intel.com>
1696 * config/tc-i386.c (avxscalar): New.
1697 (OPTION_MAVXSCALAR): Likewise.
1698 (build_vex_prefix): Select vector_length for scalar instructions
1700 (md_longopts): Add OPTION_MAVXSCALAR.
1701 (md_parse_option): Handle OPTION_MAVXSCALAR.
1702 (md_show_usage): Add -mavxscalar=.
1704 * doc/c-i386.texi: Document -mavxscalar=.
1706 2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
1708 * config/tc-i386.c (build_vex_prefix): Set i.vex.bytes[0] to
1711 2010-01-23 Richard Sandiford <r.sandiford@uk.ibm.com>
1713 * write.h (fix_at_start): Declare.
1714 * write.c (fix_new_internal): Add at_beginning parameter.
1715 Use it instead of REVERSE_SORT_RELOCS. Fix the handling of
1716 seg_fix_tailP for the at_beginning/REVERSE_SORT_RELOCS case.
1717 (fix_new, fix_new_exp): Update accordingly.
1718 (fix_at_start): New function.
1719 * config/tc-ppc.c (md_pseudo_table): Add .ref to the OBJ_XCOFF section.
1720 (ppc_ref): New function, for OBJ_XCOFF.
1721 (md_apply_fix): Handle BFD_RELOC_NONE for OBJ_XCOFF.
1722 * config/te-i386aix.h (REVERSE_SORT_RELOCS): Remove #undef.
1724 2010-01-21 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
1726 * config/te-solaris.h (DWARF2_EH_FRAME_READ_ONLY): Make read-only
1727 on 64-bit Solaris/x86.
1728 Include obj-format.h earlier.
1730 2010-01-21 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
1732 * config/tc-s390.c (s390_elf_final_processing): New function.
1733 * config/tc-s390.h (elf_tc_final_processing): New macro definition.
1734 (s390_elf_final_processing): Added prototype.
1737 2010-01-20 Nick Clifton <nickc@redhat.com>
1740 * config/tc-arm.c (do_neon_cvt): Rename to do_neon_cvt_1. Add
1741 code to handle round-to-zero for VCVT conversions.
1742 (do_neon_cvt): New. Call do_neon_cvt_1.
1743 (do_neon_cvtr): New. Call do_neon_cvt_1.
1744 (insns): Use do_neon_cvt for VCVT insn and do_neon_cvtr for VCVTR
1747 2010-01-18 Tristan Gingold <gingold@adacore.com>
1749 * config/tc-ia64.c (ia64_vms_note): Generate 24 bytes note headers.
1751 2010-01-15 Sebastian Pop <sebastian.pop@amd.com>
1753 * config/tc-i386.c (md_assemble): Before accessing the IMM field
1754 check that it's not an XOP insn.
1756 2010-01-14 Jie Zhang <jie.zhang@analog.com>
1758 * config/bfin-aux.h: Remove argument names in function
1760 * config/bfin-lex.l (parse_int): Fix shadowed variable name
1762 * config/bfin-parse.y (value_match): Remove argument names
1764 (notethat): Likewise.
1765 (yyerror): Likewise.
1767 2010-01-13 Daniel Jacobowitz <dan@codesourcery.com>
1769 * config/tc-arm.c (do_t_nop): Correct check for Thumb-2 NOP.
1771 2010-01-13 Nick Clifton <nickc@redhat.com>
1773 * config/tc-h8300.c (h8300_elf_section): New function - issue a
1774 warning message if a new section is created without setting any
1776 (md_pseudo_table): Intercept section creation pseudos.
1777 (md_pcrel_from): Replace abort with an error message.
1778 * config/obj-elf.c (obj_elf_section_name): Export this function.
1779 * config/obj-elf.h (obj_elf_section_name): Prototype.
1781 2010-01-12 Alan Modra <amodra@gmail.com>
1784 * listing.c (print_source): Add one to line number.
1786 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1788 * Makefile.in: Regenerate.
1789 * configure: Regenerate.
1790 * doc/Makefile.in: Regenerate.
1792 2010-01-08 H.J. Lu <hongjiu.lu@intel.com>
1794 * version.c (parse_args): Change to "Copyright 2010".
1796 2010-01-06 Quentin Neill <quentin.neill@amd.com>
1798 * config/tc-i386.c (cpu_arch): Add amdfam15.
1799 (i386_align_code): Add PROCESSOR_AMDFAM15 cases.
1800 * config/tc-i386.h (processor_type): Add PROCESSOR_AMDFAM15.
1801 * doc/c-i386.texi: Add amdfam15.
1803 2010-01-04 Daniel Gutson <dgutson@codesourcery.com>
1805 * config/tc-arm.c (do_neon_logic): Accept imm value
1806 in the third operand too.
1807 (operand_parse_code): OP_RNDQ_IMVNb renamed to
1809 (parse_operands): OP_NILO case removed, applied renaming.
1810 (insns): Neon shape changed for some logic instructions.
1812 2010-01-04 Daniel Gutson <dgutson@codesourcery.com>
1814 * config/tc-arm.c (do_neon_ldx_stx): Added
1815 validation for vector load/store insns.
1817 2010-01-04 Edmar Wienskoski <edmar@freescale.com>
1819 * config/tc-ppc.c (md_show_usage): Document -me500mc64.
1821 2010-01-03 Daniel Gutson <dgutson@codesourcery.com>
1823 * config/tc-arm.c (struct arm_it): New flag 'is_neon'.
1824 (NEON_ENC_*): Macros renamed to _NEON_ENC_*.
1825 (NEON_ENCODE): New macro.
1826 (check_neon_suffixes): New macro.
1827 (do_vfp_cond_or_thumb): Set the 'is_neon' flag.
1828 (do_vfp_nsyn_opcode): Likewise.
1829 (do_vfp_nsyn_nmul): Use the new 'NEON_ENCODE' macro.
1830 (do_vfp_nsyn_cmp): Likewise.
1831 (do_neon_shl_imm): Likewise.
1832 (do_neon_qshl_imm): Likewise.
1833 (neon_dyadic_misc): Likewise.
1834 (do_neon_mac_maybe_scalar): Likewise.
1835 (do_neon_qdmulh): Likewise.
1836 (do_neon_qmovn): Likewise.
1837 (do_neon_qmovun): Likewise.
1838 (do_neon_movn): Likewise.
1839 (neon_mac_reg_scalar_long): Likewise.
1840 (do_neon_vmull): Likewise.
1841 (do_neon_trn): Likewise.
1842 (do_neon_ldx_stx): Likewise.
1843 (neon_dp_fixup): Changed signature and set the flag.
1844 (neon_three_same): Call the above with new signature.
1845 (neon_two_same): Likewise.
1846 (neon_imm_shift): Likewise.
1847 (neon_mul_mac): Likewise.
1848 (do_neon_abs_neg): Likewise.
1849 (neon_mixed_length): Likewise.
1850 (do_neon_ext): Likewise.
1851 (do_neon_mov): Likewise.
1852 (do_neon_tbl_tbx): Likewise.
1853 (do_neon_logic): Likewise, and use the new 'NEON_ENCODE' macro.
1854 (neon_compare): Likewise.
1855 (do_neon_shll): Likewise.
1856 (do_neon_cvt): Likewise.
1857 (do_neon_mvn): Likewise.
1858 (do_neon_dup): Likewise.
1859 (md_assemble): Call check_neon_suffixes ().
1861 For older changes see ChangeLog-2009
1867 version-control: never