* doc/c-arc.texi: Fix typo.
[binutils-gdb.git] / gas / ChangeLog
1 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
2
3 * doc/c-arc.texi: Fix typo.
4
5 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
6
7 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
8 Intel mode.
9
10 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
11
12 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
13 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
14 (mcf5407_ctrl): New.
15 (m68k_cpus): Adjust 5407 entry.
16
17 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
18
19 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
20 (m68k_cpus): Define 51QE cpu.
21
22 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
23 Joseph Myers <joseph@codesourcery.com>
24
25 * as.c (main): Flush stderr before printing listings to ensure
26 consistent output order across platforms.
27
28 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
29
30 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
31
32 2007-08-24 Joseph Myers <joseph@codesourcery.com>
33 Paul Brook <paul@codesourcery.com>
34
35 * remap.c: New.
36 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
37 * as.c (show_usage): Document --debug-prefix-map option.
38 (parse_args): Handle --debug-prefix-map.
39 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
40 * stabs.c (stabs_generate_asm_file): Remap debug paths.
41 * Makefile.am (GAS_CFILES): Add remap.c
42 (GENERIC_OBJS): Add remap.o.
43 Regenerate dependencies.
44 * Makefile.in: Regenerate.
45 * doc/as.texinfo (--debug-prefix-map): Document.
46
47 2007-08-24 Aurelien Jarno <aurel32@debian.org>
48
49 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
50 before printing them.
51
52 2007-08-24 Anders Waldenborg <anders@0x63.nu>
53 Alan Modra <amodra@bigpond.net.au>
54
55 * config/tc-i386.c (lex_got): Don't scan past a comma.
56
57 2007-08-23 Ben Elliston <bje@au.ibm.com>
58
59 * config/tc-ppc.c (parse_cpu): Handle "750cl".
60 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
61 (md_show_usage): Document -m750cl.
62 (md_assemble): Handle two delimiters in succession (eg. `),').
63 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
64 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
65 * testsuite/gas/ppc/ppc750ps.s: New file.
66 * testsuite/gas/ppc/ppc750ps.d: Likewise.
67
68 2007-08-23 Ben Elliston <bje@au.ibm.com>
69
70 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
71
72 2007-08-17 Alan Modra <amodra@bigpond.net.au>
73
74 PR gas/4079
75 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
76 expressions.
77 (i386_immediate): Detect and complain about more cases of
78 invalid immediate expressions. Return failure rather than
79 converting them to zero.
80 (i386_displacement): Likewise.
81
82 2007-08-17 Alan Modra <amodra@bigpond.net.au>
83
84 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
85
86 2007-08-14 Andreas Schwab <schwab@suse.de>
87
88 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
89 unrepresentable.
90
91 2007-08-12 Matthias Klose <doko@ubuntu.com>
92
93 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
94 $(top_srcdir)/../../bfd/doc.
95 * doc/Makefile.in: Regenerate.
96
97 2007-08-10 Nick Clifton <nickc@redhat.com>
98
99 * NEWS: Add a marker for the 2.18 features.
100
101 2007-08-09 Paul Brook <paul@codesourcery.com>
102
103 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
104
105 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
106
107 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
108
109 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
110
111 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
112 DWORD memory to Reg64 in Intel synax.
113 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
114 Reg32 in Intel syntax.
115
116 2007-07-25 Sterling Augustine <sterling@tensilica.com>
117
118 * config/tc-xtensa.c (xtensa_extui_opcode): New.
119 (xg_expand_assembly_insn): Check for invalid extui operands.
120 (md_begin): Initialize xtensa_extui_opcode.
121
122 2007-07-24 Nick Clifton <nickc@redhat.com>
123
124 * config/tc-mep.h (skip_whitespace): Remove definition.
125
126 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
127
128 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
129 (f32_15): Removed.
130 (jump_31): New.
131 (f32_patt): Remove f32_15.
132 (f16_patt): Likewise.
133 (i386_align_code): Updated to alt_long_patt for 64bit by
134 default.
135
136 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
137
138 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
139
140 * config/tc-i386.c (i386_align_code): Enable alignment up to
141 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
142 for K8.
143
144 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
145
146 2007-07-20 Nick Clifton <nickc@redhat.com>
147
148 * app.c (do_scrub_chars): Provide a one character buffer to hold a
149 pushed back newline at the end of an unterminated quoted string.
150
151 2007-07-14 Nick Clifton <nickc@redhat.com>
152
153 * config/tc-arm.c (create_register_alias): Return a boolean rather
154 than an integer.
155 Check the return value of insert_reg_alias and do not continue to
156 create aliases once an insertion has failed.
157 (s_unreq): Delete the all-upper-case and all-lower-case
158 alternatives as well.
159
160 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
161
162 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
163 * write.c: Likewise.
164
165 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
166
167 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
168 HAVE_64BIT_SYMBOLS.
169
170 2007-07-04 Richard Sandiford <richard@codesourcery.com>
171
172 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
173 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
174 Deprecate *x and *fx.
175 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
176 *x and *fx.
177
178 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
179
180 * config/obj-coff.h (x86_64_target_format): Renamed to ...
181 (i386_target_format): This
182 (TARGET_FORMAT): Use i386_target_format.
183
184 * config/tc-i386.c (x86_64_target_format): Removed.
185 (i386_target_format): Handle PE formats.
186
187 2007-07-04 Nick Clifton <nickc@redhat.com>
188
189 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
190 to get the right length of printed value.
191
192 2007-07-03 Nick Clifton <nickc@redhat.com>
193
194 * COPYING: Replace with GPLv3 text.
195 * app.c: Update copyright notice to refer to GPLv3.
196 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
197 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
198 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
199 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
200 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
201 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
202 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
203 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
204 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
205 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
206 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
207 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
208 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
209 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
210 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
211 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
212 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
213 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
214 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
215 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
216 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
217 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
218 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
219 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
220 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
221 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
222 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
223 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
224 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
225 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
226 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
227 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
228 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
229 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
230 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
231 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
232 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
233 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
234 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
235 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
236 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
237 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
238 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
239 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
240 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
241 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
242 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
243 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
244 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
245 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
246 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
247 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
248 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
249 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
250 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
251 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
252 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
253 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
254 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
255 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
256
257 * flonum-mult.c: Likewise, and also correct typo referring to
258 non-existant GNU Assembler General Public License.
259 * config/tc-m68851.h: Likewise.
260 * NEWS: Mention the new license. Also note where the 2.17 release
261 happened.
262 * config/e-crisaout.c: Add copyright header.
263 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
264 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
265 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
266 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
267 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
268 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
269 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
270 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
271 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
272 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
273 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
274 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
275 config/te-wince-pe.h: Likewise.
276
277 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
278
279 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
280 (install_operand): Add E encoding.
281 (md_begin): Check and skip initial '.' arg character.
282 (get_num): Add 0..511 case.
283
284 2007-07-03 Alan Modra <amodra@bigpond.net.au>
285
286 PR 4713
287 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
288 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
289
290 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
291
292 PR 4722
293 * app.c (do_scrub_chars <state 5>): Check for output buffer full
294 after memcpy.
295
296 2007-07-02 Joseph Myers <joseph@codesourcery.com>
297
298 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
299 s_dtprel_internal): New.
300 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
301 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
302 BFD_RELOC_MIPS_TLS_DTPREL64.
303
304 2007-07-02 Alan Modra <amodra@bigpond.net.au>
305
306 * Makefile.am: Run "make dep-am".
307 * Makefile.in: Regenerate.
308 * aclocal.m4: Regenerate.
309 * config.in: Regenerate.
310 * doc/Makefile.in: Regenerate.
311 * po/POTFILES.in: Regenerate.
312 * po/gas.pot: Regenerate.
313
314 2007-07-02 Alan Modra <amodra@bigpond.net.au>
315
316 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
317 coff section flag values to bfd section flag.
318
319 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
320
321 * aclocal.m4: Regenerated.
322 * doc/Makefile.in: Likewise.
323 * Makefile.in: Likewise.
324
325 2007-06-29 Joseph Myers <joseph@codesourcery.com>
326
327 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
328
329 2007-06-29 Joseph Myers <joseph@codesourcery.com>
330
331 * as.c (create_obj_attrs_section): New.
332 (main): Call create_obj_attrs_section for ELF.
333 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
334 skip_past_comma, s_vendor_attribute): New.
335 (potable): Add gnu_attribute for ELF.
336 * read.h (s_vendor_attribute): Declare.
337 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
338 round s_vendor_attribute.
339 (aeabi_set_public_attributes): Update for new attributes
340 interfaces.
341 (arm_md_end): Remove attributes contents setting now done
342 generically.
343
344 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
345
346 * Makefile.am: Add CR16 related entry.
347 * Makefile.in: Regenerate.
348 * config/tc-cr16.h: New file
349 * config/tc-cr16.c: New file
350 * doc/c-cr16.texi: New file for cr16
351 * doc/all.texi: Entry for cr16
352 * doc/Makefile.am: Added c-cr16.texi
353 * doc/Makefile.in: Regenerate
354 * doc/as.texinfo: Entry for CR16 target
355 * NEWS: Announce the support for the new target.
356
357 2007-06-26 Paul Brook <paul@codesourcery.com>
358
359 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
360 for OP_RVC.
361 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
362
363 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
364
365 * config/tc-i386.c (process_operands): Replace regKludge
366 with RegKludge.
367
368 2007-06-25 Richard Sandiford <richard@codesourcery.com>
369
370 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
371 * config/tc-mips.c (append_insn): Record which symbols have
372 R_MIPS16_26 relocations against them.
373 (mips_fix_adjustable): Don't reduce relocations against such symbols.
374
375 2007-06-22 Sterling Augustine <sterling@tensilica.com>
376
377 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
378 (frag_format_size): Handle RELAX_IMMED_STEP3.
379 (xtensa_relax_frag, md_convert_frag): Likewise.
380 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
381 (RELAX_IMMED_MAXSTEPS): Adjust.
382 * config/xtensa-relax.c (widen_spec_list): Add transitions from
383 wide branches to branch-over-jumps.
384 (build_transition): Handle wide branches in transition patterns.
385
386 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
387
388 * config/tc-i386.c (disp_size): New.
389 (imm_size): Likewise.
390 (output_disp): Use disp_size and imm_size.
391 (output_imm): Use imm_size.
392
393 2007-06-19 Sterling Augustine <sterling@tensilica.com>
394
395 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
396 use of literal_frag field.
397 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
398 in the literal_frag field.
399 (xtensa_move_literals): Use it here instead of searching. Update
400 literal_frag field with new value.
401
402 2007-06-14 Paul Brook <paul@codesourcery.com>
403
404 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
405 narrow shift by immediate.
406
407 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
408
409 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
410
411 * acinclude.m4: Don't include m4 files.
412 (BFD_BINARY_FOPEN): Removed.
413 Remove libtool kludge.
414
415 * Makefile.in: Regenerated.
416 * doc/Makefile.in: Likewise.
417 * aclocal.m4: Likewise.
418 * configure: Likewise.
419
420 2007-06-11 Sterling Augustine <sterling@tensilica.com>
421 Bob Wilson <bob.wilson@acm.org>
422
423 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
424 (XTENSA_PROP_NO_TRANSFORM): ...this.
425 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
426 (xtensa_mark_frags_for_org): New.
427 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
428 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
429 (get_frag_property_flags): Adjust reference to is_no_transform flag.
430 (xtensa_frag_flags_combinable): Likewise.
431 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
432 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
433
434 2007-06-06 Paul Brook <paul@codesourcery.com>
435
436 * config/tc-arm.c (s_align): Pad code sections appropriately.
437
438 2007-06-05 Paul Brook <paul@codesourcery.com>
439
440 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
441
442 2007-06-05 Nick Clifton <nickc@redhat.com>
443
444 PR gas/4587
445 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
446
447 2007-06-05 Alan Modra <amodra@bigpond.net.au>
448
449 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
450 number@ppu.
451 (tc_gen_reloc): Abort if neither addsy or subsy is set.
452 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
453 * config/tc-spu.h (md_operand): Handle @ppu without sym.
454
455 2007-05-31 Paul Brook <paul@codesourcery.com>
456
457 * config/tc-arm.c (insns): Allow strex on M profile cores.
458
459 2007-05-29 David S. Miller <davem@davemloft.net>
460 Jakub Jelinek <jakub@redhat.com>
461
462 PR gas/4558
463 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
464 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
465
466 2007-05-29 Alan Modra <amodra@bigpond.net.au>
467
468 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
469
470 2007-05-29 Alan Modra <amodra@bigpond.net.au>
471
472 * config/tc-ppc.c: Convert to ISO C.
473 * config/tc-ppc.c: Likewise.
474
475 2007-05-29 Alan Modra <amodra@bigpond.net.au>
476
477 * write.h (EXEC_MACHINE_TYPE): Delete.
478 (string_byte_count, section_alignment): Delete.
479
480 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
481
482 * app.c (do_scrub_chars): Cope with \ at end of buffer.
483
484 2007-05-26 Alan Modra <amodra@bigpond.net.au>
485
486 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
487 top 32 bits of 64 bit value if so doing results in passing
488 range check. Rewrite sign extension fudges similarly. Enable
489 fudges for powerpc64 too. Report user value if range check
490 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
491 range rather than value, also to report user value on failure.
492
493 2007-03-25 Paul Brook <paul@codesourcery.com>
494
495 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
496 (do_t_add_sub): Correctly encode subs pc, lr, #const.
497 (do_t_mov_cmp): Correctly encode movs pc, lr.
498
499 2007-05-24 Steve Ellcey <sje@cup.hp.com>
500
501 * Makefile.in: Regnerate.
502 * configure: Regenerate.
503 * aclocal.m4: Regenerate.
504 * doc/Makefile.in: Regenerate.
505
506 2007-05-22 Bob Wilson <bob.wilson@acm.org>
507
508 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
509 and index entries about automatic alignment of ENTRY instructions.
510
511 2007-05-22 Nick Clifton <nickc@redhat.com>
512
513 * doc/as.texinfo: Use @copying around the copyright notice.
514
515 2007-05-18 Joseph Myers <joseph@codesourcery.com>
516
517 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
518 containing a comma.
519
520 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
521
522 PR gas/4517
523 2003-06-05 Michal Ludvig <mludvig@suse.cz>
524 * doc/as.texinfo: Document new directives: .cfi_restore,
525 .cfi_undefined, .cfi_same_value, .cfi_return_column,
526 .cfi_remember_state and .cfi_restore_state.
527
528 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
529
530 * config/tc-m68k.c (md_apply_fix): Show value of out of range
531 fixups in error message.
532 (md_conver_frag_1): Propagate the fix source location and use
533 as_bad_where rather than fatal, for better error messages.
534
535 2007-05-16 Paul Brook <paul@codesourcery.com>
536
537 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
538
539 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
540
541 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
542
543 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
544
545 PR gas/3041
546 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
547 addend is stored for relocs against weak symbols.
548 (md_apply_fix): So not loose track of addend for relocs against
549 weak symbols.
550
551 2007-05-14 Thiemo Seufer <ths@mips.com>
552
553 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
554
555 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
556
557 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
558 addri, addri.c, subi, and subi.c when immediate number is hex.
559 (score_insns): Remove subis and subis.c.
560 (do_sub_rdi16): Delete.
561
562 2007-05-11 Alan Modra <amodra@bigpond.net.au>
563
564 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
565 spu_cons for word.
566 (md_assemble): Tidy use of insn.flag.
567 (get_imm): Likewise. Handle uppercase input too.
568 (spu_cons): New function.
569 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
570 (TC_FORCE_RELOCATION): Don't resolve them either.
571
572 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
573
574 * config/tc-arm.c (md_apply_fix): Generate more accurate
575 diagnostic when 8-bit immediate range is exceeded for
576 BFD_RELOC_ARM_OFFSET_IMM8.
577
578 2007-05-04 Alan Modra <amodra@bigpond.net.au>
579
580 PR gas/4460
581 * config/tc-i386.c (lex_got): Don't replace the reloc token with
582 a space if we already have a space.
583
584 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
585
586 * config/tc-i386.c (match_template): Don't explicitly check
587 suffix for crc32 in Intel mode.
588 (process_suffix): Issue an error for crc32 if the operand size
589 is ambiguous.
590
591 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
592 Nick Clifton <nickc@redhat.com>
593
594 PR gas/3041
595 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
596 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
597 (md_apply_fix): Put zero values into the frags referencing weak
598 symbols.
599
600 2007-05-02 Alan Modra <amodra@bigpond.net.au>
601
602 PR 4448
603 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
604 PPC_OPERAND_PLUS1.
605
606 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
607
608 * config/tc-i386.c (match_template): Check suffix for crc32 in
609 Intel mdoe.
610 (process_suffix): Default the suffix of 8bit crc32 to
611 BYTE_MNEM_SUFFIX.
612 (check_byte_reg): Skip check for 8bit crc32.
613
614 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
615
616 * config/tc-i386.c (md_assemble): Use register_prefix in
617 error/warning message.
618 (check_byte_reg): Likewise.
619 (check_long_reg): Likewise.
620 (check_qword_reg): Likewise.
621 (check_word_reg): Likewise.
622 (process_operands): Likewise.
623
624 2007-04-30 Alan Modra <amodra@bigpond.net.au>
625
626 PR 4436
627 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
628 min > max.
629
630 2007-04-28 Thiemo Seufer <ths@networkno.de>
631
632 * config/tc-mips.c: Fix comment.
633
634 2007-04-26 Anatoly Sokolov <aesok@post.ru>
635
636 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
637 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
638 * doc/c-avr.texi: Document new devices.
639
640 2007-04-24 Alan Modra <amodra@bigpond.net.au>
641
642 * Makefile.am: Run "make dep-am".
643 * Makefile.in: Regenerate.
644
645 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
646
647 * config/tc-m68k.c (mcf54455_ctrl): New.
648 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
649 (m68k_archs): Add isac.
650 (m68k_cpus): Add 54455 family.
651 (m68k_ip): Split Bg into Bb, Bs, Bg.
652 (m68k_elf_final_processing): Add ISA_C.
653 * doc/c-m68k.texi (M680x0 Options): Add isac.
654
655 2007-04-22 Alan Modra <amodra@bigpond.net.au>
656
657 * read.c (read_a_source_file): Skip multiple spaces to
658 cover hack in mmix md_start_line_hook which overwrites a
659 colon with a space. Delete sermon and needless assertion.
660
661 2007-04-21 Alan Modra <amodra@bigpond.net.au>
662
663 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
664 (md_atof): Make number_of_chars unsigned. Revert last change.
665 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
666 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
667 * config/tc-sh.h (md_optimize_expr): Likewise.
668 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
669 assertion.
670 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
671
672 2007-04-21 Nick Clifton <nickc@redhat.com>
673
674 * config/atof-vax.c (md_atof): Fix comparison inside know().
675
676 * config/tc-ia64.c (emit_one_bundle): Fix typo.
677
678 2007-04-21 Alan Modra <amodra@bigpond.net.au>
679
680 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
681 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
682 Don't skip over NUL char.
683 (pseudo_set): Set X_op for registers to O_register.
684 * symbols.c (symbol_clone): Remove assertion that sym is defined.
685 (resolve_symbol_value): Resolve O_register symbols.
686 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
687 Instead find st(0) by hash lookup.
688 * config/tc-ppc.c (ppc_macro): Warning fix.
689
690 * as.h (ENABLE_CHECKING): Default define to 0.
691 (know): Assert if ENABLE_CHECKING.
692 (struct relax_type): Remove superfluous declaration.
693 * configure.in (--enable-checking): New.
694 * configure: Regenerate.
695 * config.in: Regenerate.
696 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
697 Check for duplicate powerpc_operands entries.
698
699 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
700
701 * config/tc-m68k.c (mcf5253_ctrl): New.
702 (mcf52223_ctrl): New.
703 (m68k_cpus): Add 5253, 52221, 52223.
704
705 * config/m68k-parse.h (RAMBAR_ALT): New.
706 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
707 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
708 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
709 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
710 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
711 RAMBAR1.
712 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
713 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
714 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
715 to control register mapping.
716
717 2007-04-20 Alan Modra <amodra@bigpond.net.au>
718
719 * messages.c (as_internal_value_out_of_range): Fix typo in
720 error message. Return after printing domain error.
721 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
722 in max when shifting right.
723
724 2007-04-20 Alan Modra <amodra@bigpond.net.au>
725
726 * messages.c (as_internal_value_out_of_range): Extend to report
727 errors for values with invalid low bits set.
728 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
729 fields. Check that operands and opcode fields are disjoint.
730 (ppc_insert_operand): Check operands using mask rather than bit
731 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
732 insertion code.
733 (md_apply_fix): Adjust for struct powerpc_operand change.
734
735 2007-04-19 Paul Brook <paul@codesourcery.com>
736
737 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
738 Thumb-1. Add sanity check for bogus relaxations.
739
740 2007-04-19 Paul Brook <paul@codesourcery.com>
741
742 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
743
744 2007-04-19 Alan Modra <amodra@bigpond.net.au>
745
746 * Makefile.am: Run "make dep-am".
747 * Makefile.in: Regenerate.
748
749 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
750
751 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
752
753 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
754
755 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
756
757 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
758
759 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
760 (match_template): Handle operand size for crc32 in SSE4.2.
761 (process_suffix): Handle operand type for crc32 in SSE4.2.
762 (output_insn): Support SSE4.2.
763
764 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
765
766 * config/tc-i386.c (cpu_arch): Add .sse4.1.
767 (process_operands): Adjust implicit operand for blendvpd,
768 blendvps and pblendvb in SSE4.1.
769 (output_insn): Support SSE4.1.
770
771 2007-04-18 Paul Brook <paul@codesourcery.com>
772
773 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
774
775 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
776
777 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
778 of as_warn_where for misaligned data.
779
780 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
781
782 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
783 rs_fill frags.
784
785 2007-04-14 Steve Ellcey <sje@cup.hp.com>
786
787 * Makefile.am: Add ACLOCAL_AMFLAGS.
788 * Makefile.in: Regenerate.
789
790 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
791
792 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
793 (sh_optimize_expr): Likewise.
794 * config/tc-sh.h (md_optimize_expr): Define.
795 (sh_optimize_expr): Prototype.
796
797 2007-04-06 Matt Thomas <matt@netbsd.org>
798
799 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
800 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
801 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
802
803 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
804
805 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
806
807 2007-04-04 Paul Brook <paul@codesourcery.com>
808
809 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
810 (insns): Use I15 for vext.
811
812 2007-04-04 Paul Brook <paul@codesourcery.com>
813
814 * configure.tgt: Loosen checks for arm uclinux eabi targets.
815
816 2007-04-02 Sterling Augustine <sterling@tensilica.com>
817
818 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
819 outputting_stabs_line_debug.
820
821 2007-03-26 Anatoly Sokolov <aesok@post.ru>
822
823 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
824 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
825 devices.
826 * doc/c-avr.texi: Document new devices.
827
828 2007-04-02 Richard Sandiford <richard@codesourcery.com>
829
830 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
831 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
832 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
833
834 2007-03-30 Sterling Augustine <sterling@tensilica.com>
835 Bob Wilson <bob.wilson@acm.org>
836
837 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
838 Do not check is_loop_target flag.
839 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
840 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
841 xtensa_move_labels for alignment of loop opcodes.
842
843 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
844
845 * config/tc-i386.c (process_suffix): Reindent a bit.
846
847 2007-03-30 Paul Brook <paul@codesourcery.com>
848
849 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
850 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
851 (do_t_push_pop): Use encode_thumb2_ldmstm.
852
853 2007-03-29 DJ Delorie <dj@redhat.com>
854
855 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
856 (md_relax_table): Add entries for ADJNZ macros.
857 (M32C_Macros): Add ADJNZ macros.
858 (subtype_mappings): Add entries for ADJNZ macros.
859 (insn_to_subtype): Check for adjnz and sbjnz insns.
860 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
861 (md_convert_frag): Convert adjnz and sbjnz.
862
863 2007-03-29 Nick Clifton <nickc@redhat.com>
864
865 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
866 initialization.
867 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
868 using ITBL_NUMBER_OF_PROCESSORS.
869 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
870
871 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
872
873 * config/tc-i386.c (build_modrm_byte): For instructions with 2
874 register operands, encode destination in i.rm.regmem if its
875 RegMem bit is set.
876
877 2007-03-28 Richard Sandiford <richard@codesourcery.com>
878 Phil Edwards <phil@codesourcery.com>
879
880 * doc/as.texinfo: Put the contents after the title page rather
881 than at the end of the document.
882
883 2007-03-27 Alan Modra <amodra@bigpond.net.au>
884
885 * NEWS: Mention ".reloc".
886
887 2007-03-26 Sterling Augustine <sterling@tensilica.com>
888
889 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
890 in FLIX instructions.
891
892 2007-03-26 Julian Brown <julian@codesourcery.com>
893
894 * config/tc-arm.c (arm_it): Add immisfloat field.
895 (parse_qfloat_immediate): Disallow integer syntax for floating-point
896 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
897 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
898 float.
899 (neon_cmode_for_move_imm): Reject non-float immediates for float
900 operands.
901 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
902
903 2007-03-26 Julian Brown <julian@codesourcery.com>
904
905 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
906
907 2007-03-26 Alan Modra <amodra@bigpond.net.au>
908
909 * doc/as.texinfo (Reloc): Document.
910 * read.c (potable): Add "reloc".
911 (s_reloc): New function.
912 * write.c (reloc_list): New global var.
913 (resolve_reloc_expr_symbols): New function.
914 (write_object_file): Call it.
915 (write_relocs): Process reloc_list.
916 * write.h (struct reloc_list): New.
917 (reloc_list): Declare.
918
919 2007-03-24 Paul Brook <paul@codesourcery.com>
920
921 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
922
923 2007-03-24 Paul Brook <paul@codesourcery.com>
924 Mark Shinwell <shinwell@codesourcery.com>
925
926 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
927 (parse_operands): Don't expect comma if first operand missing.
928 Handle OP_oRRw.
929 (do_srs): Encode register number, checking it is r13. Update comment.
930 (insns): Update SRS entries to take a register.
931
932 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
933
934 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
935
936 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
937
938 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
939 attempt to jump to the next instruction into NOPs.
940
941 2007-03-23 Alan Modra <amodra@bigpond.net.au>
942
943 * config/tc-spu.c: Don't include opcode/spu.h.
944 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
945 (md_apply_fix): Adjust.
946 * config/tc-spu.h: Include opcode/spu.h.
947 (struct tc_fix_info): New.
948 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
949 (TC_FORCE_RELOCATION): Define.
950
951 2007-03-22 Joseph Myers <joseph@codesourcery.com>
952
953 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
954
955 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
956
957 * config/tc-i386.c (process_suffix): Check 0x90 instead of
958 xchg for xchg %rax,%rax.
959
960 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
961
962 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
963 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
964
965 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
966
967 PR binutils/4218
968 * config/tc-i386.c (match_template): Properly handle 64bit mode
969 "xchg %eax, %eax".
970
971 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
972
973 PR gas/4124
974 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
975
976 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
977
978 * Makefile.am: Run dep-am.
979 * Makefile.in: Regenerated.
980
981 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
982
983 * config/tc-i386.h: Include "opcodes/i386-opc.h".
984 (NOP_OPCODE): Removed.
985 (template): Likewise.
986
987 2007-03-21 Andreas Schwab <schwab@suse.de>
988
989 * config/tc-i386.h (NOP_OPCODE): Restore.
990
991 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
992
993 * config/tc-arm.c (do_mul): Don't warn about overlapping
994 Rd and Rm operands when assembling for v6 or above.
995 Correctly capitalize register names in the messages.
996 (do_mlas): Likewise. Delete spurious blank line.
997
998 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
999
1000 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1001
1002 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1003
1004 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1005 i386_regtab.
1006 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1007 on i386_regtab.
1008
1009 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1010
1011 PR gas/4184
1012 * app.c (do_scrub_chars): PUT after setting states.
1013
1014 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1015
1016 * Makefile.am: Run "make dep-am".
1017 * Makefile.in: Regenerated.
1018
1019 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1020 "opcode/i386.h".
1021 (md_begin): Check reg_name != NULL for the last entry in
1022 i386_regtab.
1023
1024 * config/tc-i386.h: Move many entries to opcode/i386.h and
1025 opcodes/i386-opc.h.
1026
1027 * configure.in (need_opcodes): Set true for i386.
1028 * configure: Regenerated.
1029
1030 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1031
1032 * Makefile.am (REPORT_BUGS_TO): Removed.
1033 (INCLUDES): Remove -DREPORT_BUGS_TO.
1034 * Makefile.in: Regenerated.
1035
1036 * configure.in (--with-bugurl): Removed.
1037 * configure: Regenerated.
1038
1039 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1040 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1041 (TEXI2DVI): Likewise.
1042 (gasver.texi): Removed.
1043 (MOSTLYCLEANFILES): Remove gasver.texi.
1044 (as.1): Don't depend on gasver.texi.
1045 * doc/Makefile.in: Regenerated.
1046
1047 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1048
1049 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1050
1051 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1052 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1053 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1054 * gas/symbols.c (copy_symbol_attributes): Use
1055 TC_COPY_SYMBOL_ATTRIBUTES.
1056
1057 2007-03-14 Paul Brook <paul@codesourcery.com>
1058
1059 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1060
1061 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1062
1063 PR 4029
1064 * write.c (relax_segment): Insert extra alignment padding
1065 to break infinite relax loop when given impossible
1066 gcc_except_table assembly.
1067
1068 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1069
1070 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1071 on i.tm.base_opcode.
1072 (match_template): Likewise.
1073 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1074
1075 * config/tc-i386.h (Opcode_D): New.
1076 (Opcode_FloatR): Likewise.
1077 (Opcode_FloatD): Likewise.
1078 (D): Redefined.
1079 (W): Likewise.
1080 (FloatMF): Likewise.
1081 (FloatR): Likewise.
1082 (FloatD): Likewise.
1083
1084 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1085
1086 * app.c (do_scrub_chars): Recognize comments after # line "file".
1087 * read.c (get_linefile_number): New.
1088 (s_app_line): Accept ill-formed .linefile lines as comments.
1089
1090 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1091
1092 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1093
1094 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1095
1096 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1097 * as.h (new_logical_line_flags): New.
1098 * input-scrub.c (new_logical_line): Turned into wrapper for...
1099 (new_logical_line_flags): this. Handle flags.
1100 * read.c (potable): Add linefile. Adjust appline argument.
1101 (s_app_file): Fake .appfiles no more.
1102 (s_app_line): For .linefile, accept file name and flags.
1103
1104 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1105
1106 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1107
1108 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1109
1110 * Makefile.am: Run "make dep-am".
1111 * Makefile.in: Regenerate.
1112 * po/POTFILES.in: Regenerate.
1113
1114 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1115
1116 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1117 bug-reporting URL.
1118 * doc/Makefile.am (gasver.texi): Define BUGURL.
1119 * doc/as.texinfo: Use BUGURL.
1120 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1121
1122 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1123
1124 * config/tc-s390.c (md_parse_option): z9-ec option added.
1125
1126 2007-03-02 Paul Brook <paul@codesourcery.com>
1127
1128 * config/tc-arm.c (relax_immediate): Always return positive values.
1129 (relaxed_symbol_addr): New function.
1130 (relax_adr, relax_branch): Use it.
1131 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1132
1133 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1134
1135 * as.c (parse_args): Update copyright date.
1136
1137 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1138
1139 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1140
1141 2007-02-28 Nick Clifton <nickc@redhat.com>
1142
1143 PR gas/3797
1144 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1145 just return -1 whenever a problem is encountered.
1146 (md_assemble): If do_assemble returns -1 generate a non-fatal
1147 error message and return.
1148
1149 PR gas/2623
1150 * config/tc-msp430.c (line_separator_char): Change to '{'.
1151
1152 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1153
1154 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1155 (build_jump_insn): Likewise.
1156 (build_insn): Likewise.
1157 (s_m68hc11_relax): Likewise.
1158
1159 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1160
1161 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1162
1163 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1164
1165 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1166
1167 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1168
1169 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1170 (md_assemble): Likewise.
1171
1172 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1173
1174 * write.c (size_seg): Always clear SEC_RELOC here.
1175 (install_reloc): New function, extracted from..
1176 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1177 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1178 testing frag size. Set SEC_RELOC here.
1179
1180 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1181
1182 PR 4082
1183 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1184
1185 2007-02-20 Thiemo Seufer <ths@mips.com>
1186
1187 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1188
1189 2007-02-20 Thiemo Seufer <ths@mips.com>
1190
1191 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1192
1193 2007-02-20 Thiemo Seufer <ths@mips.com>
1194 Chao-Ying Fu <fu@mips.com>
1195
1196 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1197 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1198 (macro_build): Add case '2'.
1199 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1200 (validate_mips_insn): Add support for balign instruction.
1201 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1202 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1203 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1204 command line options.
1205 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1206 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1207 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1208 .set dspr2, .set nodspr2.
1209
1210 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1211
1212 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1213 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1214
1215 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1216
1217 * write.c (TC_FX_SIZE_SLACK): Define.
1218 (write_relocs): Reinstate check for fixup within frag.
1219 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1220 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1221 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1222 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1223 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1224
1225 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1226 Nathan Sidwell <nathan@codesourcery.com>
1227 Vladimir Prus <vladimir@codesourcery.com
1228 Joseph Myers <joseph@codesourcery.com>
1229
1230 * configure.in (--with-bugurl): New option.
1231 * configure: Regenerate.
1232 * dep-in.sed: Remove bin-bugs.h.
1233 * Makefile.am (REPORT_BUGS_TO): Define.
1234 (INCLUDES): Define REPORT_BUGS_TO.
1235 (DEP_INCLUDES): Likewise.
1236 ($(OBJS)): No longer depend on bin-bugs.h.
1237 * Makefile.in: Regenerate.
1238 * doc/Makefile.in: Regenerate.
1239 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1240 * as.h: Remove include of bin-bugs.h.
1241
1242 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1243
1244 * write.c: White space fixes.
1245 (fixup_segment): Move symbol_mri_common_p adjustments..
1246 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1247 (adjust_reloc_syms): ..to here.
1248
1249 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1250
1251 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1252 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1253 (subseg_set_rest): Remove unnecessary cast.
1254 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1255 Remove unnecessary forward declarations and casts.
1256 (set_symtab): Delete extern bfd_alloc.
1257 (fixup_segment): Move.
1258
1259 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1260
1261 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1262 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1263 (mcf5475_ctrl, mcf5485_ctrl): New.
1264 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1265 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1266 (init_table): Add asid, mmubar, adjust rombar0.
1267
1268 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1269
1270 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1271 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1272 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1273 code, and test for these insns using a combination of
1274 opcode_modifier and operand_types.
1275
1276 2007-02-07 Paul Brook <paul@codesourcery.com>
1277
1278 * configure.tgt: Add arm*-*-uclinux-*eabi.
1279
1280 2007-02-05 Dave Brolley <brolley@redhat.com>
1281 Richard Sandiford <rsandifo@redhat.com>
1282 DJ Delorie <dj@redhat.com>
1283 Stan Cox <scox@redhat.com>
1284 Jim Blandy <jimb@redhat.com>
1285 Nick Clifton <nickc@redhat.com>
1286 Jim Wilson <wilson@redhat.com>
1287 Frank Ch. Eigler <fche@redhat.com>
1288 Graydon Hoare <graydon@redhat.com>
1289 Ben Elliston <bje@redhat.com>
1290 John Healy <jhealy@redhat.com>
1291 Richard Henderson <rth@redhat.com>
1292
1293 * Makefile.am (CPU_TYPES): Add mep.
1294 (TARGET_CPU_CFILES): Add tc-mep.c.
1295 (TARGET_CPU_HFILES): Add tc-mep.h.
1296 (DEPTC_mep_elf): New variable.
1297 (DEPTC_mep_coff): Likewise.
1298 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1299 * configure.in: Support mep.
1300 * configure.tgt: Likewise.
1301 * config/tc-mep.c: New file.
1302 * config/obj-elf.c: New file.
1303 * config/tc-mep.c: New file.
1304 * config/tc-mep.h: New file.
1305 * testsuite/gas/mep: New testsuite with content.
1306 * Makefile.in: Regenerate.
1307 * configure: Regenerate.
1308
1309 2007-02-05 Dave Brolley <brolley@redhat.com>
1310
1311 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1312 (complex_reloc_installation_howto): Removed.
1313
1314 2007-02-05 Dave Brolley <brolley@redhat.com>
1315 Graydon Hoare <graydon@redhat.com>
1316 DJ Delorie <dj@redhat.com>
1317 Catherine Moore <clm@redhat.com>
1318 Michael Chastain <chastain@redhat.com>
1319 Frank Ch. Eigler <fche@redhat.com>
1320
1321 * symbols.c (use_complex_relocs_for): New, to decide
1322 when to use complex relocs. Add signed RELC support.
1323 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1324 encode expression symbols as mangled complex relocation symbols (when
1325 compiled with -DOBJ_COMPLEX_RELOC).
1326 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1327 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1328 encode_addend with new args. Modify to get start, length from
1329 ifield whenever it is set. Also change condition on which
1330 self-describing relocs are encoded. Add hook into
1331 gas_cgen_encode_addend.
1332 (queue_fixup_recursively): Add signed RELC support. Change from masked
1333 expr to trunc flag. Restore assignment of sub-field value to
1334 temporary in fixups array. Reflect changed meaning of last arg to
1335 queue_fixup_recursively.
1336 (fixup): Add cgen_maybe_multi_ifield member.
1337 (make_right_shifted_expr): New function.
1338 (queue_fixup): Change to recursive function that fragments
1339 fixups if operand has a multi-ifield.
1340 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1341 symbols, call weak_operand_overflow_check, and fragment call
1342 queue_fixup with operand fields.
1343 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1344 (weak_operand_overflow_check): New function to try to select
1345 insns correctly.
1346 (gas_cgen_encode_addend): New function for relc.
1347 (gas_cgen_install_complex_reloc): Likewise.
1348 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1349 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1350 cgen_maybe_multi_ifield field to fx_cgen substructure.
1351 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1352 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1353
1354 2007-02-03 DJ Delorie <dj@delorie.com>
1355
1356 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1357 byte relocs.
1358 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1359 (m32c_cons_fix_new): Prototype.
1360
1361 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1362
1363 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1364 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1365
1366 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1367
1368 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1369 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1370 (map_suffix_reloc_to_operator): New.
1371 (map_operator_to_reloc): New.
1372 (expression_maybe_register): Fix incorrect test of return value from
1373 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1374 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1375
1376 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1377
1378 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1379 (tinsn_get_tok): Delete prototype.
1380 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1381
1382 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1383
1384 * config/xtensa-relax.h (struct build_instr): Delete id field.
1385 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1386 and LABEL tokens.
1387 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1388 set op_data fields to zero.
1389 (parse_id_constant): Delete.
1390 (build_transition): Remove code to handle numbered literals and labels.
1391
1392 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1393
1394 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1395 (build_transition_table): Likewise.
1396
1397 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1398
1399 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1400 fx_tcbit.
1401 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1402
1403 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1404
1405 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1406 (struct fix <fx_plt>): Rename to tcbit2.
1407 * write.c (fix_new_internal): Adjust.
1408 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1409 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1410 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1411 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1412 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1413 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1414 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1415 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1416 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1417 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1418 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1419 Instead, compare fx_r_type.
1420 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1421 fx_tcbit in place of fx_plt.
1422 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1423 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1424 to fx_plt.
1425
1426 2007-01-30 Nick Clifton <nickc@redhat.com>
1427
1428 * as.c (main): Mark symbols created via the --defsym command line
1429 option as volatile so that they can be overridden later on by a
1430 .set directive. This maintains compatibility with the behaviour
1431 of earlier versions of the assembler.
1432 * doc/as.texinfo (--defsym): Document that the defined symbol's
1433 value can be overridden via a .set directive.
1434
1435 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1436
1437 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1438 (swap_2_operands): This. Take 2 ints.
1439 (md_assemble): Updated.
1440 (swap_operands): Call swap_2_operands to swap 2 operands.
1441
1442 2007-01-24 DJ Delorie <dj@redhat.com>
1443
1444 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1445
1446 2007-01-22 Nick Clifton <nickc@redhat.com>
1447
1448 PR gas/3871
1449 * tc-score.c: Remove unnecessary uses of _().
1450 Make the err_msg[] a file level local array in order to save
1451 storage space.
1452 Remove unnecessary sprintf()s.
1453
1454 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1455
1456 PR gas/3871
1457 * config/tc-score.c : Using _() for const string.
1458 Do not assign inst.error with a local string pointer.
1459 (md_section_align): Pad section.
1460
1461 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1462
1463 * config/tc-i386.c (build_modrm_byte): Check number of operands
1464 when procssing memory/register operand.
1465
1466 2007-01-12 Nick Clifton <nickc@redhat.com>
1467
1468 PR gas/3856
1469 * macro.c (expand_irp): Do not ignore spaces inside quoted
1470 strings.
1471
1472 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1473
1474 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1475 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1476 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1477 (TC_FORCE_RELOCATION): Define.
1478 (TC_FORCE_RELOCATION_LOCAL): Define.
1479 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1480
1481 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1482
1483 * input-file.c (input_file_open): Check fgets return.
1484
1485 2007-01-11 Paul Brook <paul@codesourcery.com>
1486
1487 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1488
1489 2007-01-11 Nick Clifton <nickc@redhat.com>
1490
1491 PR gas/3707
1492 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1493 variable.
1494
1495 * config/tc-mcore.c (md_number_to_chars): Use
1496 number_to_chars_{big|little}endian.
1497
1498 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1499
1500 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1501 architecture by itself.
1502 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1503 (m68k_elf_final_processing): Treat Fido as an architecture by
1504 itself.
1505
1506 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1507
1508 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1509
1510 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1511
1512 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1513 depending on allow_naked_reg.
1514
1515 2007-01-04 Paul Brook <paul@codesourcery.com>
1516
1517 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1518
1519 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1520
1521 PR gas/3830
1522 * config/tc-i386.c (register_prefix): New.
1523 (set_intel_syntax): Set set_intel_syntax to "" if register
1524 prefix isn't needed.
1525 (check_byte_reg): Use register_prefix for error message.
1526 (check_long_reg): Likewise.
1527 (check_qword_reg): Likewise.
1528 (check_word_reg): Likewise.
1529
1530 2007-01-04 Julian Brown <julian@codesourcery.com>
1531
1532 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1533 (do_neon_qshl_imm): Likewise.
1534 (do_neon_rshl): New function. Handle rounding variants of
1535 v{q}shl-by-register.
1536 (insns): Use do_neon_rshl for vrshl, vqrshl.
1537
1538 2007-01-04 Paul Brook <paul@codesourcery.com>
1539
1540 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1541 and vacle.
1542
1543 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1544
1545 * config/tc-i386.c (swap_operands): Remove branches.
1546
1547 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1548
1549 * config/tc-i386.c: Update copyright year.
1550 * config/tc-i386.h: Likewise.
1551
1552 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1553
1554 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1555 instead of int.
1556
1557 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1558
1559 * config/tc-i386.c: Convert to ISO C90 formatting
1560 * config/tc-i386.h: Likewise.
1561
1562 2007-01-03 David Daney <ddaney@avtrex.com>
1563
1564 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1565 documentation.
1566
1567 For older changes see ChangeLog-2006
1568 \f
1569 Local Variables:
1570 mode: change-log
1571 left-margin: 8
1572 fill-column: 74
1573 version-control: never
1574 End: