gas/doc/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = 1.8 cygnus
   4
   5 # What version of the manual you want; "all" includes everything
   6 CONFIG=all
   7
   8 # Options to extract the man page from as.texinfo
   9 MANCONF = -Dman
  10
  11 TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
  12
  13 POD2MAN = pod2man --center="GNU Development Tools" \
  14         --release="binutils-$(VERSION)" --section=1
  15
  16 man_MANS = as.1
  17
  18 info_TEXINFOS = as.texinfo
  19 as_TEXINFOS = asconfig.texi $(CPU_DOCS)
  20
  21 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
  22                    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
  23 TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
  24                    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
  25
  26 asconfig.texi: $(CONFIG).texi
  27         rm -f asconfig.texi
  28         cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
  29         chmod u+w ./asconfig.texi
  30
  31 CPU_DOCS = \
  32         c-alpha.texi \
  33         c-arc.texi \
  34         c-arm.texi \
  35         c-avr.texi \
  36         c-bfin.texi \
  37         c-cr16.texi \
  38         c-d10v.texi \
  39         c-cris.texi \
  40         c-h8300.texi \
  41         c-hppa.texi \
  42         c-i370.texi \
  43         c-i386.texi \
  44         c-i860.texi \
  45         c-i960.texi \
  46         c-ip2k.texi \
  47         c-lm32.texi \
  48         c-m32c.texi \
  49         c-m32r.texi \
  50         c-m68hc11.texi \
  51         c-m68k.texi \
  52         c-mips.texi \
  53         c-mmix.texi \
  54         c-mt.texi \
  55         c-msp430.texi \
  56         c-ns32k.texi \
  57         c-pdp11.texi \
  58         c-pj.texi \
  59         c-ppc.texi \
  60         c-s390.texi \
  61         c-sh.texi \
  62         c-sh64.texi \
  63         c-sparc.texi \
  64         c-tic54x.texi \
  65         c-vax.texi \
  66         c-v850.texi \
  67         c-xtensa.texi \
  68         c-z80.texi \
  69         c-z8k.texi
  70
  71 # We want install to imply install-info as per GNU standards, despite the
  72 # cygnus option.
  73 install-data-local: install-info
  74
  75 pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
  76
  77 install-pdf: install-pdf-am
  78
  79 install-pdf-am: $(PDFS)
  80         @$(NORMAL_INSTALL)
  81         test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
  82         @list='$(PDFS)'; for p in $$list; do \
  83           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  84           f=$(pdf__strip_dir) \
  85           echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
  86           $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
  87         done
  88
  89 html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
  90
  91 install-html: install-html-am
  92
  93 install-html-am: $(HTMLS)
  94         @$(NORMAL_INSTALL)
  95         test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
  96         @list='$(HTMLS)'; for p in $$list; do \
  97           if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
  98           f=$(html__strip_dir) \
  99           if test -d "$$d$$p"; then \
 100             echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
 101             $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 102             echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 103             $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
 104           else \
 105             echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
 106             $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
 107           fi; \
 108         done
 109
 110 # This one isn't ready for prime time yet.  Not even a little bit.
 111
 112 noinst_TEXINFOS = internals.texi
 113
 114 MAINTAINERCLEANFILES = asconfig.texi
 115
 116 BASEDIR = $(srcdir)/../..
 117 BFDDIR = $(BASEDIR)/bfd
 118
 119 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 120
 121 # Maintenance
 122
 123 # We need it for the taz target in ../../Makefile.in.
 124 info-local: $(MANS)
 125
 126 # Build the man page from the texinfo file
 127 # The sed command removes the no-adjust Nroff command so that
 128 # the man output looks standard.
 129 as.1: $(srcdir)/as.texinfo asconfig.texi $(CPU_DOCS)
 130         touch $@
 131         -$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texinfo > as.pod
 132         -($(POD2MAN) as.pod | \
 133                 sed -e '/^.if n .na/d' > $@.T$$$$ && \
 134                 mv -f $@.T$$$$ $@) || \
 135                 (rm -f $@.T$$$$ && exit 1)
 136         rm -f as.pod
 137
 138 MAINTAINERCLEANFILES += as.info
 139
 140 # Automake 1.9 will only build info files in the objdir if they are
 141 # mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
 142 # though, so we use a bogus condition.
 143 if GENINSRC_NEVER
 144 DISTCLEANFILES = as.info
 145 endif