* gas/dvp/vif-1.d: Update.

[binutils-gdb.git] / gas / testsuite / ChangeLog

start-sanitize-sky
Wed Mar 25 14:27:46 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/vif-1.d: Update.

end-sanitize-sky
start-sanitize-r5900
Tue Mar 24 18:21:03 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.s: Add tests for "bc2f", "bc2fl", "bc2t", "bc2tl",
        "cfc.i", "cfc.ni", "ctc.i", and "ctc.ni".
        * gas/mips/vu0.d: Corresponding changes.

end-sanitize-r5900
start-sanitize-sky
Mon Mar 23 13:26:12 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/mpg-1.[sd]: New files.
        * gas/dvp/mpg-1vu.s: New file.
        * gas/dvp/dvp.exp: Run new test mpg-1.s.

end-sanitize-sky
start-sanitize-m32rx
Mon Mar 23 11:34:00 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.d: Fix sath bit pattern (PR15418).

end-sanitize-m32rx
Mon Mar 23 10:47:33 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/all/align.s: Back out ".section text" change below;
        use ".text" again.
        * gas/macros/semi.s: Ditto.
        
start-sanitize-r5900
Sun Mar 22 13:16:31 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.d: We don't want relocations in the output.
        (vcallms): Enable opcode checking on this test.

end-sanitize-r5900
Fri Mar 20 18:51:49 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/all/align.s: Identify ".text" section explicitly.
        * gas/macros/semi.s: Ditto.
        
start-sanitize-sky
        * gas/dvp/dma-2.d: Change to match automatic alignment of dmadata.
end-sanitize-sky
        
start-sanitize-r5900
Thu Mar 19 14:13:12 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.s, gas/mips/vu0.d: New testfiles.
        * gas/mips/mips.exp: Run vu0 tests.

end-sanitize-r5900
        
start-sanitize-sky
Thu Mar 19 10:49:15 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/vif-1.[sd]: stcycle -> stcycl.

Tue Mar 17 14:02:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/dma-[12].[sd]: New testcases.
        * gas/dvp/dvp.exp: Run them.

Thu Mar 12 15:25:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/*.d: Update, dest spec on registers is printed again.

Fri Mar  6 11:22:23 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/upper-2.d (loi): Fix expected output.
        * gas/dvp/vif-1.[sd]: Add more tests.
        * gas/dvp/vif-2.[sd]: New testcases.
        * gas/dvp/gif{packed,reglist,image}-1.[sd]: New testcases.
        * gas/dvp/dvp.exp: Run them.  Pass -I${srcdir}/${subdir} to gas.

end-sanitize-sky
start-sanitize-vr4320
Tue Mar  3 11:06:53 1998  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp (ilocks) : Added mips64vr4320*-*-*.

end-sanitize-vr4320
Mon Mar  2 13:30:40 1998  Doug Evans  <devans@seba.cygnus.com>

        * gas/m32r/allinsn.[sd] (ldi8a,ldi16a): Delete.
        (ldi16): Improve test.
        (nop): Fix test.

start-sanitize-vr5400
Mon Feb 23 10:31:05 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.s: Use absolute expression for performance
        register number.
        * gas/mips/vr5400.d: Corresponding changes.

end-sanitize-vr5400
start-sanitize-r5900
Mon Feb 23 10:31:05 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s: Use absolute expression for performance
        register number.
        * gas/mips/r5900.d: Corresponding changes.

Fri Feb 20 01:29:16 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s, gas/mips/r5900.d: Update for "mula.s" change.

end-sanitize-r5900
start-sanitize-m32rx
Thu Feb 19 10:35:48 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s (mvtc__subv): Avoid register conflict.

        * gas/m32r/m32rx.d: Updated to match latest assembler output.
end-sanitize-m32rx
start-sanitize-sky
Tue Feb 17 18:44:12 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/{basic-1,lower-1,upper-1,upper-2}.d: Update to remove dest
        spec on operands.

end-sanitize-sky
start-sanitize-m32rx
Fri Feb 13 14:44:32 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s (rte__subx): Do not perform RTE and SUBX in
        parallel since they both write to the C bit.

end-sanitize-m32rx
start-sanitize-sky
Thu Feb 12 17:42:39 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/upper-2.[sd]: New testcase.
        * gas/dvp/dvp.exp: Run it.

end-sanitize-sky
Thu Feb 12 20:12:39 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/macro.out: Adjust to reflect the fact that keyword
        arguments are now permitted after positional arguments.

start-sanitize-sky
Wed Feb 11 17:07:25 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/{*}: .text renamed to .vutext.
        * gas/dvp/vif-1.[sd]: Renamed from pke-1.[sd].

Tue Feb 10 15:32:22 1998  Ian Carmichael  <iancarm@cygnus.com>

        * gas/dvp/{error.exp,bignum-1.[sd],bignum_d.s}: New files.

end-sanitize-sky
start-sanitize-m32rx
Mon Feb  9 17:19:05 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s: Add tests for DIVH and new versions of RAC and
        RACH instructions.  Rename MACHL1 ro MACLH1.
end-sanitize-m32rx
Wed Feb  4 15:27:44 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/arm/arm7t.d: Update to match latest assembler output.

Wed Feb  4 15:40:00 1998  Geoffrey Keating  <geoffk@ozemail.com.au>

        * gas/ppc/ppc.exp: New file.
        * gas/ppc/astest.s, gas/ppc/astest.d: New test.
        * gas/ppc/astest2.s, gas/ppc/astest2.d: New test.

Sun Feb  1 21:43:54 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/4010.s: Pad test code out to a 16byte boundary.
        * gas/mips/4010.d: Corresponding changes.
        * gas/mips/4100.s: Pad test code out to a 16byte boundary.
        * gas/mips/4100.d: Corresponding changes.
        * gas/mips/4650.s: Pad test code out to a 16byte boundary.
        * gas/mips/4650.d: Corresponding changes.
start-sanitize-r5900
        * gas/mips/5900.s: Pad test code out to a 16byte boundary.
        * gas/mips/5900.d: Corresponding changes.
end-sanitize-r5900

Fri Jan 30 14:09:13 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/moveml.d: Add test comments, fix regexps.

Thu Jan 29 13:34:49 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/m32r/{allinsn,high-1}.d: Allow # constant prefix to be missing.

Thu Jan 29 09:43:50 1998  Richard Henderson  <rth@cygnus.com>

        * gas/m68k/mri_moveml.[sd]: Moved to ...
        * gas/mri/moveml.[sd]: ... here.
        * gas/mri/mri.exp: Run it.

start-sanitize-sky
Wed Jan 28 10:18:21 1998  Doug Evans  <devans@canuck.cygnus.com>

        * dvp/dvp.exp: New file.
        * dvp/{basic-1,br-1,upper-1,lower-1,pke-1}.[sd]: New testcases.

end-sanitize-sky
Tue Jan 27 21:55:44 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/4010.s: Add 4010 tests.
        * gas/mips/4010.d: Expected output.
        * gas/mips/4100.s: Add 4010 tests.
        * gas/mips/4100.d: Expected output.
        * gas/mips/4650.s: Add 4010 tests.
        * gas/mips/4650.d: Expected output.
        * gas/mips/mips.exp: Run the new tests.
        * gas/mips/*.d: Pass the right processor model to objdump.
        Fix minor cases where expected output was wrong due to opcode
        conflicts.

Tue Jan 27 05:35:02 1998  Richard Henderson  <rth@cygnus.com>

        * gas/m68k/mri_moveml.[sd]: New testcase.

start-sanitize-m32rx
Fri Jan 23 10:30:29 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s: Use 'label' as desitnation of branches.
        * gas/m32r/m32rx.d: Update to match latest disassembly.

end-sanitize-m32rx
Thu Jan 22 17:29:07 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/high-1.d: Add hash prefix to constants.

        * gas/m32r/allinsn.s: Add hash prefix to some constants.
        * gas/m32r/allinsn.d: Add hash prefix to constants.
start-sanitize-m32rx
        * gas/m32r/m32rx.s: Add tests for automatic parallelisation.
        * gas/m32r/m32rx.d: Add results of automatic parallelisation.
        * gas/m32r/relax-1.d: Add results of automatic parallelisation.
        * gas/m32r/uppercase.d: Add results of automatic parallelisation.
end-sanitize-m32rx

Wed Jan 21 21:24:08 1998  Manfred Hollstein  <manfred@s-direktnet.de>

        * gas/m88k/init.d: Fix hexadecimal offsets.

Wed Jan 14 17:49:22 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/uppercase.d: Fix white space matching.
        * gas/m32r/relax-1.d: Fix white space matching.
start-sanitize-m32rx    
        * gas/m32r/m32rx.d: Add expected results.
        * gas/m32r/m32rx.s: Correct typos in test cases.
end-sanitize-m32rx      

Wed Jan 14 15:44:32 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/div.d: Update for recent assembler changes.
        * gas/mips/div-ilocks.d: Likewise.

Wed Jan 14 11:13:06 1998  Doug Evans  <devans@seba.cygnus.com>

        * gas/m32r/allinsn.d (cmpui): Update output to new format.

start-sanitize-r5900
Mon Dec 22 12:47:16 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/r5900.d: Update for current disassembler.

end-sanitize-r5900
Thu Dec 18 11:10:42 1997  Nick Clifton  <nickc@cygnus.com>

start-sanitize-m32rx
        * gas/m32r/m32rx.d: New file.
        * gas/m32r/m32rx.s: New file.
        * gas/m32r/m32rx.exp: New file.

end-sanitize-m32rx
        * gas/arm/inst.d: Updated to match latest disassembler changes.

        * gas/arm/arm7t.d: Updated to match latest disassembler changes.

Tue Dec 16 22:19:25 1997  Ken Raeburn  <raeburn@cygnus.com>

        * gas/mips/lb-xgot.d, gas/mips/rol.d, gas/mips/jal-svr4pic.d,
        gas/mips/jal-xgot.d: Add assembler option to select a specific
        target chip, the R3000.
        * gas/mips/lb-xgot-ilocks.d: New test, specifically selecting
        R3900.
        * gas/mips/mips.exp: Run it.

start-sanitize-r5900
Tue Dec 16 12:54:30 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s: Add more r5900 tests.
        * gas/mips/r5900.d: Corresponding changes.

        * gas/mips/r5900.s: New testcase for r5900 insns.
        * gas/mips/r5900.d: Support file for r5900 tests.
        * gas/mips/mips.exp: Run r5900 tests too.

end-sanitize-r5900
start-sanitize-vr5400
Mon Dec 15 10:34:15 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.s: Tweak mfpc, mtpc, mfps, mfps, and mtps for
        better testing coverage.
        * gas/mips/vr5400.d: Corresponding changes.

end-sanitize-vr5400
start-sanitize-tx49
Thu Dec 11 09:23:05 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Don't run the mips16 test for tx49.

end-sanitize-tx49
start-sanitize-vr5400
Tue Dec  9 13:19:58 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.d: Minor tweaks for more accurate matching.

Fri Nov  7 21:32:01 1997  Ken Raeburn  <raeburn@cygnus.com>

        * gas/mips/vr5400.s, gas/mips/vr5400.d: New test, for
        VR5400-specific instructions.
        * gas/mips/mips.exp: Run it.

end-sanitize-vr5400
        * gas/ieee-fp/x930509a.exp: Don't run IEEE FP tests for Vax
        targets.

start-sanitize-tx49
Wed Oct 29 16:27:30 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Add tx49 configury.

end-sanitize-tx49
Wed Oct 15 10:40:14 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/ieee-fp/x930509a.s: Tweak slightly to work on the PA.

        * gas/hppa/unsorted/unsorted.exp: Update for recent disassembler
        changes.

Thu Oct  9 18:10:44 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/set64.[sd]: `set' doesn't take negative arguments.

Thu Oct  9 12:59:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/arm7t.d: Update for recent disassembler changes.
        * gas/h8300/ffxx1.d: Likewise.

Wed Oct  8 16:22:50 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/reloc64.[sd]: Add testcases for %hix,%lox.

Wed Oct  8 15:12:35 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Update for recent disassembler changes.
        * gas/sparc/synth64.d: Likewise.

        * gas/mips/beq.s: Add .text to .globl to mark the symbol to as a
        function symbol.
        * gas/mips/jal.s: Likewise.

Tue Oct  7 13:30:30 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/reloc64.[sd]: New testcase.
        * gas/sparc/sparc.exp: Run it.

Sat Oct  4 19:14:24 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/ieee-fp/x930509a.exp: Accept m68k listing format.

Fri Oct  3 15:46:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/ieee-fp/x930509a.exp: Remove setup_xfail; it should now
        work.  Correct for big endian and for tabs in input file.

        * gas/alpha/fp.exp: Check for alpha-*-osf*, not alpha-*-osf1*.
        * gas/alpha/fp.s: Change comment characters from ! to #.

Thu Sep 18 11:17:53 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.d: Update to new objdump output format.
        * gas/sparc/{asi.d,membar.d,prefetch.d,rdpr.d,wrpr.d}: Likewise.
        * gas/sparc/set64.[ds]: New testcase.
        * gas/sparc/splet-2.[ds]: New testcase.
        * gas/sparc/sparc.exp: Run them.

start-sanitize-d30v
Tue Sep 16 15:27:08 1997  Ken Raeburn  <raeburn@cygnus.com>

        Merge changes from Martin Hunt:

        * gas/d30v/inst.s: Add some new tests. 

        * gas/d30v/{inst, opt, reloc}.d: Update results with
        new disassembler changes.

        * gas/d30v/inst.[sd]: Update examples for d*i instructions. 

        * gas/d30v/*.d: Update all test results because
        of new ".s" and ".l" extensions.

        * gas/d30v/inst.[sd]: Correct entry for mulx2h.
        * gas/d30v/opt.[sd]: Correct st2w instruction. 

        * gas/d30v/align.d: Change expected output.

        * gas/d30v/reloc.[sd]: Add test case. 

        * gas/d30v/array.[sd]: New test case.

        * gas/d30v/opt.[sd]: Added more test cases. 

        * gas/d30v/opt.s: Add test cases.
        * gas/d30v/reloc.s: Fix a test case.    
        * gas/d30v/{opt,reloc}.d: Regenerate.

end-sanitize-d30v
start-sanitize-tx19
Mon Sep 15 17:29:08 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Handle r3900 and r1900.
        * gas/mips/ld-ilocks: New file.

end-sanitize-tx19
Mon Sep  8 14:21:23 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/high-1.[ds]: New testcase.
        * gas/m32r/m32r.exp: Run it.

Mon Aug 25 11:04:24 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/relax-1.[ds]: New testcase.
        * gas/m32r/m32r.exp: Run it.

Thu Aug 14 23:49:49 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/arc: New directory
        * gas/arc/{arc.exp,alias.[sd],branch.[sd],flag.[sd],insn3.[sd],j.[sd],
        ld.[sd],math.[sd],sshift.[sd],st.[sd],warn.{exp,s}}: New files.

Wed Aug  6 00:33:30 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/default.exp: Set AS and GASP to as-new, not as.new.

Tue Aug  5 12:33:23 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/default.exp: Set NM to nm-new, not nm.new, to match
        recent change in binutils build directory.

Thu Jul 31 15:21:51 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/range.s: New test.
        * gas/v850/basic.exp: Run it.

Tue Jul 29 14:35:02 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/hilo2.s: New test.
        * gas/v850/fepsw.s: New test.
        * gas/v850/basic.exp: Run them.

Tue Jul 15 13:03:17 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/uppercase.[sd]: New testcase.
        * gas/m32r/m32r.exp: New file.

Mon Jun 16 14:32:11 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/pcrel.d: Update for m68k disassembler changes.
        * gas/m68k/operands.d: Likewise.

Mon Jun  2 16:50:03 1997  Nick Clifton  <nickc@cygnus.com>

        * gas/arm/arm.exp: Added changes from armT-970328-branch.

Mon Jun  2 12:09:02 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: The r3900 has interlocks for mul, but
        not div.

Mon Jun  2 12:03:32 1997  Gavin Koch  <gavin@.cygnus.com>

        * gas/mips/mul.{d,s}: End the tests with no-ops. 

Mon Jun  2 11:48:58 1997  Gavin Koch  <gavin@cygnus.com>

        * lib/gas-defs.exp (regexp_diff): Improve messages when one
        file is shorter than the other.

Wed May  7 16:18:30 1997  Manfred Hollstein  <manfred@s-direktnet.de>

        * gas/m88k/init.{s,d}: New checks for proper padding of
        .init sections.
        * gas/m88k/m88.exp: Run them.

        * gas/m68k/t2.d: New file for check of presence of section
        symbols on the m68k-motorola-sysv.
        * gas/m68k/all.exp: Run t2 if [istarget m68*-motorola-sysv].

Wed May  7 16:12:24 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Don't run cofftag test for m88k-coff.

        * gas/mips/lifloat.s: Update for recent changes to floating point
        handling.
        * gas/mips/lif-empic.d, gas/mips/lif-svr4pic.d: Likewise.
        * gas/mips/lif-xgot.d, gas/mips/lifloat.d: Likewise.

        * gas/mips/mips.exp: Handle Irix 6 like Irix 5.

Sat Apr 19 23:16:35 1997  Niklas Hallqvist  <niklas@petra.appli.se>

        * gas/mips/mips.exp: Handle OpenBSD like NetBSD.

start-sanitize-d30v
Wed Apr 16 12:20:24 1997  Martin Hunt  <hunt@cygnus.com>

        * gas/d30v/d30.exp: Add optimizer test case.
        * gas/d30v/opt.s: Add conditional compilation tests.
        * gas/d30v/opt.d: Rebuild.

end-sanitize-d30v       
Tue Apr 15 18:10:01 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/{delay.d,nodelay.d}: added.

Mon Apr  7 12:57:45 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/allinsn.d: Update to new objdump output style.

Fri Apr  4 13:19:39 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/float.s: Put a tab before .text, to keep the PA happy.

        * gas/arm/arm.exp: Only run inst and arm7t on targets which can
        handle -EL.  Add setup_xfail for thumb.

        * gas/h8300/ffxx1.d: Don't fail if BFD is 64 bits.

Thu Apr  3 18:26:56 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/allinsn.{exp,s.d}: New testcases.

start-sanitize-d30v
Thu Mar 27 00:42:28 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * gas/d30v/d30.exp: Add test case reloc.
        * gas/d30v/reloc.[sd]: New files to test relocations.

end-sanitize-d30v       
Sat Mar 15 17:21:46 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/inst.d: Update for disassembler changes.
        * gas/arm/arm7t.d: Likewise.

Tue Mar 11 13:31:56 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * gas/m68k/op68000.d: Update for recent assembler bug fix.

Wed Mar  5 13:01:24 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail a couple tests for the mn10300.

start-sanitize-tic80
Mon Mar  3 11:41:00 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, float.d, regops2.d, relocs1.d, relocs1b.d,
        relocs2.d, relocs2b.d}: Adjust to objdump format tweaks.

Thu Feb 27 15:21:46 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{align.d, align.lst, align.s} New test for the
        ".align" pseudop.
        * gas/tic80/tic80.exp: Run the align test.
        
Wed Feb 26 20:36:46 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{float.d, float.lst, float.s}: New tests for
        simple floating point operands.
        * gas/tic80/tic80.exp: Run the float test.

Wed Feb 26 15:16:04 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{regops2.d, regops2.lst, regops2.s, regops3.d,
        regops3.lst, regops3.s, regops4.d, regops4.lst, regops4.s}:
        New tests for :m and :s operand modifiers.
        * gas/tic80/tic80.exp: Run the regops2, regops3, and regops4 tests.

end-sanitize-tic80
Tue Feb 25 13:45:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/semi.s: Force the final alignment to use a fill value
        of 0.

        * gas/all/cond.s, gas/all/cond.d: New test.
        * gas/all/gas.exp: Run it.

Mon Feb 24 10:52:12 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gas-defs.exp(gas_init): Added new parameter for script
        name.

start-sanitize-tic80
Mon Feb 24 10:40:28 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, bitnum.d, ccode.d, cregops.d, endmask.d,
        regops.d, relocs1.d, 
        (relocs1.c): Add file for reference.
        (relocs1b.d): Split reloc table contents test to different test file.
        (relocs2.c): Add test that uses various types (char, short, int, ...) of
        static and global variables with data shuffling to generate lots of ld/st
        instructions for the different types.
        (relocs2.d): New file, expected code for relocs2 test.
        (relocs2.lst): New file, TI assembler listing for reference.
        (relocs2.s): New file, assembly source for relocs2 test.
        (relocs2b.d): New file, expected reloc table contents for relocs2 test.
        (tic80.exp): Run the relocs1b, relocs2, and relocs2b tests.

end-sanitize-tic80
Sun Feb 23 17:54:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/all/itbl-test.c(main): Update function calls.
        Remove parameters from itbl_get_reg_val and
        change itbl_get_insn_name to itbl_get_field.

Sun Feb 23 17:22:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl: Add comments.
        * gas/mips/itbl.s: Add comments.  Prefix register names with $.
        * gas/all/itbl: Generic table for testing for itbl support.
        * gas/all/itbl.s: Generic assembly for testing for itbl support.
        * gas/mips/itbl-test.c: Moved to gas/all.
        * gas/all/itbl-test.c: Moved from gas/mips.

start-sanitize-tic80
Sat Feb 22 20:24:23 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.lst, bitnum.lst, ccode.lst, cregops.lst,
        endmask.lst, regops.lst}: Remove ^M's from end of lines.
        * gas/tic80/bitnum.s: Add comment to each line showing value
        that symbolic BITNUM assembles to.  Add coverage for raw
        numeric values for the BITNUM operand.
        * gas/tic80/bitnum.d: Update due to bitnum.s changes.
        * gas/tic80/regops.d: Update due to opcode library additions
        of floating point test BITNUM values that are ambiguous with
        the integral ones.
        * gas/tic80/relocs1.s: New test case that tests simple relocs.
        * gas/tic80/relocs1.d: Expected output for above.
        * gas/tic80/relocs1.lst: TI assembler listing for above.
        * gas/tic80/tic80.exp: Add relocs1 test.

end-sanitize-tic80
start-sanitize-d30v
Fri Feb 21 14:23:14 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * gas/d30v/{align.d, align.s, d30.exp, guard.d, guard.s,
        inst.d, inst.s, opt.d, opt.s}: Test files for D30V.

end-sanitize-d30v       
Wed Feb 19 00:55:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/semi.s, gas/macros/semi.d: New test.
        * gas/macros/macros.exp: Run it.
        * gas/mri/semi.s, gas/mri/semi.d: New test.
        * gas/mri/mri.exp: Run it.

Tue Feb 18 13:37:06 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/unsorted.exp (align4 tests): Tweak expected
        output.
        
Fri Feb 14 17:56:27 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/align.d, gas/all/align.s: New test.
        * gas/all/gas.exp: Run it.

Thu Feb 13 14:44:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Correct PC relative instruction bytes.

Wed Feb 12 12:33:08 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/lif-svr4pic.d: Pass -EB when running the assembler.
        * gas/mips/lif-xgot.d: Likewise.
        * gas/mips/ulh-svr4pic.d: Likewise.
        * gas/mips/ulh-xgot.d: Likewise.

        * gas/mips/mips16.d: Update for yet another change in disassembly
        output (this one is spacing only).

start-sanitize-tic80
Tue Feb 11 14:45:39 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, add.lst, add.s, bitnum.d, bitnum.lst, bitnum.s,
        ccode.d, ccode.lst, ccode.s, cregops.d, cregops.lst, cregops.s,
        endmask.d, endmask.lst, endmask.s, regops.d, regops.lst, regops.s,
        tic80.exp}: New files for TIc80 test cases.

end-sanitize-tic80
Tue Feb 11 15:46:27 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Update for change in disassembly output.

Mon Feb 10 22:24:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl-test.c: Add copyright message and fix indentation.   

Mon Feb 10 17:54:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl-test.c: New file.  Stand-alone assembler and 
        dissassembler for itbl support.

Mon Feb 10 17:20:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl: New file.  Instruction Spec for testing --itbl
        option.
        * gas/mips/itbl.s: New file.  Assembly with ne2w instructions
        specified in itbl.

Fri Feb  7 16:42:53 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gasp/gasp.exp: Use prune_warnings instead of prune_system_crud.
        * lib/gas-defs.exp: Ditto.

Mon Feb  3 15:46:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/inst.d, gas/arm/arm7t.d: Pass --prefix-addresses to
        objdump.  Update for current relocation printing style.

Thu Jan 30 11:57:33 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Update for disassembler changes.

Thu Jan 23 03:15:06 1997  Angela Marie Thomas (angela@cygnus.com)

        * gas/mips/mips.exp: set ilocks for all 4100/4300

Thu Jan  2 16:49:17 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.s, gas/mips/mips16.d: New test.
        * gas/mips/mips.exp: Run mips16 test.

        * gas/mips/mips.exp: Run dli test unconditionally.
        * gas/mips/dli.s: Add text symbol.  Add nops to round to 16 byte
        boundary.
        * gas/mips/dli.d: Corresponding changes.

Tue Dec 31 13:03:16 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Use --prefix-addresses for objdump.
        * gas/sparc/synth64.d: Likewise.

Tue Dec 24 16:30:58 1996  Angela Marie Thomas (angela@cygnus.com)

        * gas/mips/*-ilocks.d: Fix regexps to resemble disassembled output.

Fri Dec 13 13:05:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.[sd]: Add explicit nops, sometimes controlled by
        .ifdef, to accomodate change to avoid default alignment on
        embedded systems.

Wed Dec 11 09:26:01 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200/basic.exp (do_movb): Fix bit pattern for
        "movb dm,(an)".

Tue Dec 10 13:01:05 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Update after endianness changes to
        the assembler.

        * gas/mn10200/{mov1.s,mov2.s,mov3.s,mov4.s,movx.s}: New tests.
        * gas/mn10200/{movb.s, movbu.s}: Likewise.
        * gas/mn10200/basic.exp: Run them.

Mon Dec  9 17:08:38 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200/*.s: New tests for the mn10200 assembler.
        * gas/mn10200/basic.exp: Run them.

Fri Dec  6 15:35:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/*.s: Remove '$' register prefixing.

Mon Nov 25 16:35:33 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc-solaris/addend.exp: Fix patterns, you can't assume
        \r will be present.

Mon Nov 25 13:45:02 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/*.d: Update for disassembler changes.
        * gas/mri/*.d: Likewise.

Mon Nov 25 11:38:37 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/*.s: Use '$' as register prefix for
        all register operands.

Thu Nov 21 11:52:54 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail a couple tests for the mn10300.

Wed Nov 20 11:31:41 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/other.s: Update for correct syntax on a
        few instructions (those with register lists).
        * gas/mn10300/basic.exp: Corresponding changes.

Tue Nov 19 13:36:57 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/movm.s: Update for correct syntax.
        * gas/mn10300/basic.exp: Update expected movm bit patterns.

Fri Nov 15 13:57:42 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/other.s: Put parens around register
        argument in calls and jmp instructions.

Wed Nov 13 13:16:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/ffxx1.d: Update for recent disassembler changes.

Mon Nov 11 16:03:24 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/reloc/reloc.exp: Pass "--prefix-addresses" to objdump
        as needed.
        * gas/hppa/unsorted/unsorted.exp: Likewise.

Thu Nov  7 00:27:52 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check opcode insertion for
        extended instructions.
        * gas/mn10300/extend.s: Tweak constants for better
        testsuite coverage.

Wed Nov  6 13:50:07 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Test insertion of operands
        into call and jmp instructions with 32bit offsets.
        Fix typo in bit test patterns.
        * gas/mn10300/other.s: Tweak constants to improve
        testsuite coverage.

        * gas/mn10300/basic.exp: Test insertion of 32bit operand
        in calls, btst, bclr & bset instructions.

        * gas/mn10300/*.s: Tweak constants in 32bit insns for
        better testing coverage.
        * gas/mn10300/basic.exp: Test insertion of most 32bit
        operands.

Tue Nov  5 13:33:12 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for indexed mov,
        movbu, movhu instructions.  Check bit patterns for more bit
        operations.  Check bit patterns for various 16bit call, retf
        and ret instructions.
        * gas/mn10300/other.s: Update operands for better test coverage.

Mon Nov  4 12:55:11 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for a couple more
        mov and cmp instructions.

Tue Oct 29 17:05:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.d: Update for disassembler changes.

Wed Oct 16 22:39:50 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/reloc.s: New tests.
        * gas/v850/basic.exp: Run them.

Mon Oct 14 13:52:55 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips: Add symbols to several testsuites, since the ELF
        assembler now always builds a symbol table, which means that
        objdump will no longer report `No symbols in FILE'.  Change the
        expected output accordingly.

Thu Oct 10 13:11:48 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for instructions
        with a single 8bit or 16bit immediate operand.

        * gas/mn10300/basic.exp: Check bit patterns for many
        instructions.  Add missing test in do_mov1.
        * gas/mn10300/mov1.s: Add missing test.

Wed Oct  9 14:15:18 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/{add.s, bcc.s, bit.s, cmp.s, ext.s}: New tests.
        * gas/mn10300/{extend.s logical.s, loop.s, mov1.s}: Likewise.
        * gas/mn10300/{mov2.s, mov3.s, mov4.s, movbu.s}: Likewise.
        * gas/mn10300/{movhu.s, movm.s, muldiv.s, other.s}: Likewise.
        * gas/mn10300/{shift.s, sub.s}: Likewise.
        * gas/mn10300/basic.exp: Run them.

Thu Oct  3 09:57:03 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200, gas/mn10300: New directories for Matsushita
        mn10200 and mn10300 tests.

Tue Oct  1 15:38:28 1996  Ian Lance Taylor  <ian@cygnus.com>

        * lib/gas-defs.exp (gas_version): Fix for current version
        printing.

Sun Sep 29 07:55:58 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.d: Fix typo in cpusha result.

Mon Sep 23 12:33:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/fmoveml.s, gas/m68k/fmoveml.d: Add tests for fmovemx.

Wed Sep 18 12:14:06 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/cofftag.s: Use .p2align rather than .align.

Fri Sep 13 15:28:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/macs.s: Add "stmac" instructions.
        * gas/h8300/basic.exp: Test them.

Thu Sep 12 10:28:44 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/thumb.s (back): Check assembly of Thumb BL.

Mon Sep  9 14:37:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips4.s, gas/mips/mips4.d: Use $fccN for condition code
        registers.

Fri Sep  6 18:23:54 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/dli.{s,d}: More test cases added.

Wed Sep  4 11:47:29 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/mips.exp: Add check for dli macro instruction.
        * gas/mips/dli.{s,d}: Added.

Sat Aug 31 01:25:03 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/basic.exp (do_mem): Check bit patterns for short
        load/store instructions.  Remove xfails for short load/store
        instructions.
        * gas/v850/mem.s: Offsets for short load/store operands
        are unsigned.

        * gas/v850/basic.exp (do_branch): Check offsets in branch insns.
        (do_jumps): Likewise.
        
Fri Aug 30 00:37:55 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/misc.s: Tweak register numbers for better testing.
        * gas/v850/basic.exp (do_misc): Corresponding changes.

        * gas/v850/hilo.s: New testfile.
        * gas/v850/basic.exp: Run hilo tests.

Thu Aug 29 11:32:23 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm7t.d: Explicitly force little-endian assembly.

Fri Aug 23 11:02:55 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/basic.exp (do_move): Test instruction bit patterns.
        * gas/v850/move.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_mem): Test instruction bit patterns.
        xfail sst and sld tests.
        (do_mov): Remove bogus xfail.
        * gas/v850/mem.s: sst and sld instructions can only index from
        "ep" register.

        * gas/v850/basic.exp (do_logical): Test instruction bit patterns.
        Update addresses.
        * gas/v850/logical.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_jump): Test instruction bit patterns,
        but not displacements (yet).

        * gas/v850/basic.exp (do_compare): Test instruction bit patterns.

        * gas/v850/basic.exp (do_branch): Test instruction bit patterns,
        but not displacements (yet).
        
        * gas/v850/basic.exp (do_bit): Test instruction bit patterns.

        * gas/v850/basic.exp (do_arith): Test instruction bit patterns. 
        * gas/v850/arith.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_misc): No longer expect failures
        assembling "ldsr" and "stsr" opcodes.
        * gas/v850/misc.s: Re-enable assembling of "ldsr" and "stsr"
        opcodes.

        * gas/v850/basic.exp (do_misc): No longer expect failures
        assembling "trap" opcodes.
        * gas/v850/misc.s: Re-enable assembling of "trap" opcodes.

        * gas/v850: New directory with v850 tests.

Fri Aug 16 00:19:10 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/basic/purge.s: Use "%sr4" on pitlb, pitlbe
        fic and fice instructions to test 3bit space identifiers.
        * gas/hppa/basic/system.s: Similarly for iitlba and
        iitlbp.
        * gas/hppa/basic/basic.exp: Corresponding changes.

Thu Aug 15 16:25:05 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm.exp: Change inst.s test to check objdump.
        * gas/arm/inst.d: Added.
        
Thu Aug 15 16:06:02 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/thumb.s: Added.
        * gas/arm/immed.s: Added.
        * gas/arm/arch4t.s: Added.
        * gas/arm/arm.exp: Updated to run the new tests.

Tue Aug  6 11:06:29 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/misch.s: Reenable "eepmov.w" test.
        * gas/h8300/miscs.s: Likewise.
        * gas/h8300/h8300.exp: Check for correct assembly of "eepmov.w"
        on the H8/300H and H8/S.  Don't expect it to fail.

Wed Jul 31 10:57:44 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/asi.s: Update ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.

Wed Jul 31 15:55:12 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm7t.s: Added.
        * gas/arm/arm7t.d: Added.
        * gas/arm/arm.exp: Updated to run the new test.

Mon Jul  8 14:27:39 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/pcrel.d: Rename from schwab.d.
        * gas/m68k/pcrel.s: Rename from schwab.s.

Mon Jul  8 14:23:26 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * gas/m68k/schwab.d: Correct for ELF format.
        * gas/m68k/all.exp: Run "schwab" test for all targets.

Thu Jul  4 14:23:36 1996  Ian Lance Taylor  <ian@cygnus.com>

        Avoid DOS file naming problems:
        * gas/h8300/branch.s: Rename from branches.s.
        * gas/h8300/branchh.s: Rename from branchesh.s.
        * gas/h8300/branchs.s: Rename from branchess.s.
        * gas/h8300/rotsh.s: Rename from rotshift.s.
        * gas/h8300/rotshh.s: Rename from rotshifth.s.
        * gas/h8300/rotshs.s: Rename from rotshifts.s.
        * gas/h8300/h8300.exp: Corresponding changes.

Thu Jul  4 14:01:46 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/mips.exp: Add new tests for processors with interlocks
        on div and mul.
        * gas/mips/div-ilocks.d: Added.
        * gas/mips/mul-ilocks.d: Added.
        
Wed Jul  3 14:20:04 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Remove setup_xfail for h8300*-*-* for two tests
        which now pass.
        * gas/h8300/h8300.exp: Fix regexp of mov32bug test to work on a 64
        bit host.

Sat Jun 29 18:21:51 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Add setup_xfail for vax*-*-vms* for 930509a
        test.
        * gas/vax/quad.exp: Expect a nop after the movq.

Tue Jun 18 12:39:49 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

        * gas/h8300/cbranchh.s: Switch into h8300h mode.
        * gas/h8300/h8300.exp (H8/300H misc tests): Fix test names.

        * gas/h8300/{addsubs.s,bitops1s.s,bitops2s.s}: New tests for the
        H8/S.
        * gas/h8300/{bitops3.s,bitops4.s,cbranchs.s,logicals.s}: Likewise.
        * gas/h8300/{branchess.s,compares.s,macs.s,decimals.s}: Likewise.
        * gas/h8300/{incdecs.s,divmuls.s,miscs.s,multiples.s}: Likewise.
        * gas/h8300/{movbs.s,movws.s,movls.s,pushpops.s}: Likewise.
        * gas/h8300/{rotshifts.s,extends.s}: Likewise.
        * gas/h8300/h8300.exp: Run them.

Mon Jun 10 14:14:40 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/cofftag.s, gas/all/cofftag.d: New test for COFF enum tag
        with the same name as a global variable.
        * gas/all/gas.exp: Run cofftag test for any COFF target.

Thu Jun  6 12:30:05 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/all.exp: Pass -m68020 when assembling the disperr.s
        test.

Fri May 31 10:11:13 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/h8300.exp: Fix add.l test for H8/300H.

Wed May 29 16:35:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/jal-xgot.d: Correct for 64 bit output.

Thu Apr 25 19:31:59 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/sparc.exp: Only run sparclet tests if sparclet.

Wed Apr 24 17:06:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/op68000.d: Add statements now caught by gas.

Mon Apr 22 16:45:12 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.[ds]: New tests for sparclet extensions.
        * gas/sparc/sparc.exp: Run them.

Mon Apr 15 17:25:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/la.d: Updated for April 5 MIPS assembler changes.
        * gas/mips/lb.d, gas/mips/ld.d, gas/mips/sb.d: Likewise.
        * gas/mips/uld.d, gas/mips/ulh.d, gas/mips/ulw.d: Likewise.
        * gas/mips/usd.d, gas/mips/ush.d, gas/mips/usw.d: Likewise.

Wed Apr 10 14:27:51 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/mov32bug.s: New test.
        * gas/h8300/h8300.exp: Run it.

Fri Apr  5 10:13:28 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/{addsubh.s,bitops1h.s,bitops2h.s}: New h8300h tests.
        * gas/h8300/{bitops3h.s,bitops4h.s,branchesh.s}: New h8300h tests.
        * gas/h8300/{cbranchh.s,compareh.s,decimalh.s}: New h8300h tests.
        * gas/h8300/{divmulh.s,incdech.s,logicalh.s}: New h8300h tests.
        * gas/h8300/{misch.s,movbh.s,movwh.s}: New h8300h tests.
        * gas/h8300/{pushpoph.s,rotshifth.s}: New h8300h tests.
        * gas/h8300/h8300.exp: Run them.

        * gas/h8300/{movb.s,movw.s}: Correct predecrement syntax.

        * gas/h8300/h8300.exp: Fix typos in bitops4 and movb tests.

        * gas/h8300/{addsub.s,bitops1.s,bitops2.s}: New h8300 tests.
        * gas/h8300/{bitops3.s,bitops4.s,branches.s}: New h8300 tests.
        * gas/h8300/{cbranch.s,compare.s,decimal.s}: New h8300 tests.
        * gas/h8300/{divmul.s,incdec.s,logical.s}: New h8300 tests.
        * gas/h8300/{misc.s,movb.s,movw.s}: New h8300 tests.
        * gas/h8300/{pushpop.s,rotshift.s}: New h8300 tests.
        * gas/h8300/h8300.exp: Run them.

Fri Mar 15 17:16:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Don't require sparc in the file format, since
        it won't be there on SunOS.

Thu Mar  7 14:51:23 1996  Doug Evans  <dje@charmed.cygnus.com>

        * gas/sparc/synth.[ds]: New testcase.
        * gas/sparc/sparc.exp: Run it.

Fri Mar  1 12:01:48 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail difference of two undefined symbols
        and difference of forward references for the h8300.

Thu Feb 22 16:40:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/lb-xgot.d: Correct.

Mon Feb 19 02:43:36 1996  Doug Evans  <dje@charmed.cygnus.com>

        * gas/sparc/{asi,membar,prefetch,rdpr,synth64,wrpr}.d: Pass -Av9
        to gas.
        * gas/sparc/addend.exp: Execute for any sparc cpu.
        * gas/sparc/{mismatch.exp,mism-1.s}: New test.

Wed Feb 14 13:49:59 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/jal-xgot.d, gas/mips/la-xgot.d: New tests.
        * gas/mips/lb-xgot.d, gas/mips/ld-xgot.d: New tests.
        * gas/mips/lif-xgot.d, gas/mips/ulh-xgot.d: New tests.
        * gas/mips/mips.exp: Run new tests if svr4pic.

Sat Jan 27 13:27:45 1996  Doug Evans  <dje@charmed.cygnus.com>

        * lib/gas-dg.exp (gas-dg-test): Delete default_flags and libs args.

Fri Jan 26 14:24:01 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/unsorted.exp: Update for objdump changes.

Wed Jan 10 12:40:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.d: Update for changes to disassembler.

Wed Jan  3 22:59:53 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/ulh-svr4pic.d: Update for tc-mips.c load_address
        change.

Fri Nov 17 10:32:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/immconst.d: New test.
        * gas/mri/mri.exp: Run it.
        * gas/mri/constants.s: Test immediate constants.
        * gas/mri/constants.d: Corresponding change.

        * gas/m68k/link.s: Add nop to pad to eight byte boundary.
        * gas/m68k/link.d: Corresponding change.

Sun Nov 12 21:28:11 1995  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/brlenbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Sun Nov  5 12:49:27 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/beq.s: Declare text_label global.
        * gas/mips/jal.s: Likewise.

Fri Nov  3 12:35:07 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/link.s: Use "&" instead of "#" for immediate values.

        * gas/m68k/fmoveml.s, gas/m68k/fmoveml.d: New test.
        * gas/m68k/all.exp: Run it.

Thu Nov  2 23:11:05 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/link.s, gas/m68k/link.d: New test.
        * gas/m68k/all.exp: Run it.

Tue Oct 24 10:57:20 1995  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/basic/basic.exp: Test lci and syncdma instructions.
        * gas/hppa/basic/system.s: Corresponding changes.

Fri Oct  6 17:13:35 1995  Ken Raeburn  <raeburn@cygnus.com>

        * gas/m68k/operands.d: Don't require a fixed number of leading
        zeros in any number.

        * gas/m68k/operands.s, gas/m68k/bitfield.s: Use "&" instead of "#"
        for immediate values.

Fri Oct  6 10:54:13 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/arm/arm.exp: Renamed from gas.exp.
        * gas/arm/le-fpconst.[sd]: New testcase.

Fri Sep 29 15:12:10 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Only run tests for m68k target.

Mon Sep 25 12:31:46 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Add setup_xfail for arm*-*-* for constants
        test.

Thu Sep 21 01:26:08 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/fp.s (fmac): Update for new assembly syntax.

Mon Sep 18 14:04:34 1995  Ian Lance Taylor  <ian@cygnus.com>

        * lib/gas-defs.exp (gas_run): Call prune_system_crud.
        (run_dump_test, objdump): Likewise.

Thu Sep 14 13:10:10 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/{wrdr.[ds],rdpr.[ds]}: New tests.
        * gas/sparc/sparc.exp: Run them.

Wed Sep 13 16:35:51 1995  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in, configure.in: Remove; the testsuite is now run
        directly from the gas Makefile.

Mon Sep 11 11:44:23 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/empty.s: New file.
        * gas/mri/mri.exp: Test assembling empty.s.
        * gas/mri/comment.s: Add a couple more comment variants.

        * gas/mri/mri.exp: Add xfail for the expr test for all hppa
        targets.

Wed Sep  6 21:39:23 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/comment.s, gas/mri/comment.d: New test.
        * gas/mri/mri.exp: Run it.
        * gas/mri/expr.s: Remove whitespace in operand field.
        * gas/mri/for.s: Add comments for further testing.
        * gas/macros/test2.s: Put in an upper case ELSE to test case
        insensitivity.

Wed Aug 30 16:12:03 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/{prefetch.[ds],synth64.[ds]}: New tests.

Tue Aug 29 18:59:33 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/sparc.exp: New file.
        * gas/sparc/{asi.[ds],membar.[ds]}: New tests.

Mon Aug 21 14:39:29 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/*: New tests for macros.

        * gas/mri/common.s: Use data, not .data.

        * gasp/pl3.out: Update for changes in commented source output when
        LOCAL is used.

Sat Aug 19 17:36:17 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/gasp.exp (gasp_test): Call prune_system_crud on the output
        of diff.
        * lib/gas-defs.exp: Define prune_system_crud if it is not already
        defined.

Fri Aug 18 11:09:38 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/mri/*.out: Use ;, not !, for the comment character.

Wed Aug 16 12:24:12 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Change hppa*-*-* expected failures to only
        expect failure for targets which use SOM.

        * lib/gas-defs.exp (run_dump_test): If the program to run does not
        exist, mark the test as untested.

        * gas/mri/mri.exp: Add setup_xfail for i960 b.out targets for
        common test.

        * lib/gas-defs.exp (run_dump_test): Name the output file dump.o,
        rather than using an implicit a.out.

        * gas/mri/for.s: Add nop to round out to four byte boundary.
        * gas/mri/repeat.s: Likewise.
        * gas/mri/while.s: Likewise.
        * gas/mri/for.d: Expected added nop.
        * gas/mri/repeat.d: Likewise.
        * gas/mri/while.d: Likewise.

        * gas/mips/*.d: Change all test names to say MIPS.

Tue Aug 15 15:42:33 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/for.d, gas/mri/for.s: New test.
        * gas/mri/if.d, gas/mri/if.s: New test.
        * gas/mri/repeat.d, gas/mri/repeat.s: New test.
        * gas/mri/while.d, gas/mri/while.s: New test.
        * gas/mri/mri.exp: Run the new tests.

Mon Aug 14 16:03:07 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/expr.d: Permit leading zeroes, in case we're using a
        64-bit BFD.

        * gasp/mri/*: New tests.
        * gasp/gasp.exp: Run them.  Also, clean up the test names used in
        pass and fail.

Sun Aug 13 00:39:24 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/basic.exp: Update now that we know the right
        bit patters for the new sts instructions.

Thu Aug 10 00:46:21 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/char.d: Fix for little endian machines.
        * gas/mri/float.d: Likewise.

Wed Aug  9 15:34:36 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/struct.s, gas/all/struct.d: New test.
        * gas/all/gas.exp: Run it.

Tue Aug  8 17:11:39 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/common.s, gas/mri/common.d: New test.
        * gas/mri/mri.exp: Run it.

Mon Aug  7 22:39:28 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Add setup_xfail for a29k*-*-* for constants
        test.

        * gasp/crash1.out, gasp/macro.out, gasp/sfunc.out: Complete
        truncated files, so that the tests pass.

        * gas/mri/mri.exp: Add setup_xfail for hppa*-*-* for equ,
        constants, and expr.

        * gas/m68k/all.exp: Run schwab test on hpux*, not just hpux.  Run
        on vxworks*, not just vxworks5.1.

        * lib/gas-defs.exp (fail_phase, pass_phase): Remove.
        (run_dump_test): Just call pass or fail.

        * gas/m68k/operands.s, gas/m68k/operands.d: New test.
        * gas/m68k/op68000.d: New test.
        * gas/m68k/cas.s, gas/m68k/cas.d: New test.
        * gas/m68k/bitfield.s, gas/m68k/bitfield.d: New test.
        * gas/m68k/schwab.d: Run objdump with -j .text.  Adjust for
        changes to disassembler.
        * gas/m68k/all.exp: Run new tests.  Run schwab test for
        m68k-*-coff*.

Mon Aug  7 03:01:32 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/*: New tests for the hitachi-sh.

Tue Aug  1 18:02:47 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/*: New tests for MRI mode.

        * lib/gas-defs.exp (run_dump_test): Support using objcopy.  Dump
        program executions to the log file before running them.  Use the
        simple program name, rather than the path to the binary being run,
        in pass/fail messages.
        (regexp_diff): If the regexp file has the special comment #pass,
        stop checking at that point.
        * config/default.exp: Set NM, NMFLAGS, OBJCOPY, and OBJCOPYFLAGS,
        if they are not already set.

Tue Aug  1 11:41:30 1995  steve chamberlain  <sac@slash.cygnus.com>

        * Makefile.in: Remove superfluous runtest gasp.

Mon Jul 31 18:19:26 1995  steve chamberlain  <sac@slash.cygnus.com>

        * gasp/*: New.
        * Makefile.in: Use gasp tests.
        * config/default.exp: Add gasp stuff.

Thu Jul 20 18:56:48 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/all/gas.exp: Disable tests that are not appropriate for
        the PA.

Thu Jul 13 18:22:49 1995  Ken Raeburn  <raeburn@cygnus.com>

        * gas/m68k/all.exp: Run schwab test for m68k vxworks5.1.

Wed Jun 21 21:28:57 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/m68k/schwab.*: New test based on a test case from Andreas
        Schwab.
        * gas/m68k/all.exp: Run it for some aout configurations.

Mon Jun 12 22:27:18 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/parse/badfmpyadd.s: New test.
        * gas/hppa/parse/parse.exp: Run it.

Sun May 21 20:26:18 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp: Disable align4 tests for
        ELF targets.

Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)       

        * arm/arm7dm.s: New file -- tests for ARM7DM instructions.
        * arm/arm6.s: Correct bogus tests.
        * arm/gas.exp (arm6.s): Is now a valid test.
        (arm7dm.s): New test.
        * arm/float.s: Add load/store multiple floating point instruction 
        tests.

Wed May  3 13:14:44 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/longcall.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Tue May  2 16:37:48 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/ld.d: Modified for gas delay-slot fixes.

Sat Apr 29 23:35:18 1995  Doug Evans  <dje@chestnut.cygnus.com>

        * lib/gas-dg.exp: New file.

Tue Apr 11 13:57:52 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mips4.d: Allow more than exactly 8 zeros in bc1*
        targets.

Mon Apr 10 15:36:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * lib/gas-defs.exp (pass_phase): New proc.
        (run_dump_test): Note passing or failing of each phase of this
        test, instead of failure of phases or passing of complete test.
        Ensure test file name is in reported message.

Sat Apr  8 12:46:33 1995  Doug Evans  <dje@chestnut.cygnus.com>

        * lib/gas-defs.exp (run_dump_test): Handle arguments with paths.
        Always resolve testcase status before returning.
        If `slurp_options' fails, return and don't do test.
        (slurp_options): Fix "can't open" error message.
        Return -1 to indicate error.

Mon Mar 20 22:45:30 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/common.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Fri Mar 10 19:07:09 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/h8300/ffxx1.s: Add .word 0 at the end to eliminate
        uncertainty as to whether there should be trailing bytes in the
        output file.
        * gas/h8300/ffxx1.d: Adjust reloc values to permit an addend value
        of 0x00000000ffffffff on 64-bit hosts.  (I'm not sure if this is
        correct.)  End with "..." to match trailing zero bytes.

Wed Mar  8 15:50:34 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips4.d, gas/mips/mips4.s: New files.
        * gas/mips/mips.exp: Run new test.

Thu Feb 23 17:58:50 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fmemLRbug.s: Add indexing variants.
        * gas/hppa/basic/basic.exp: Test them.

Wed Feb 15 15:43:26 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/uld.d: New file.
        * gas/mips/uld.s: New file.
        * gas/mips/usd.d: New file.
        * gas/mips/usd.s: New file.
        * gas/mips/mips.exp: Run new tests.

Thu Feb  9 10:57:39 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/applybug.s: New test.
        * gas/hppa/reloc/reloc.exp (do_applybug_test): Run it.

Thu Feb  2 00:34:55 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/picreloc.s: New test.
        * gas/hppa/reloc/reloc.exp (do_pic_relocation_test): Run it.

Fri Jan 27 14:02:02 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/h8300/ffxx1.d, gas/h8300/ffxx1.s, gas/h8300/cmpsi2.s,
        gas/h8300/h8300.exp: New tests.

Mon Jan 23 21:44:26 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/basic.exp (do_system): Update.

Wed Jan 11 17:20:25 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mips.exp: Don't run the memory-access tests if the
        format is a.out, because the generated code is different from what
        is used with other formats.

Tue Jan 10 11:42:13 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp (align4.s): Fix glitch in
        regexp to avoid losing without a controlling tty.

Fri Dec 30 18:08:20 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/i386/pushw.l: Fixed whitespace to match current listing
        style.

        * gas/all/gas.exp: Mark test p1480.s expected to pass, even with
        listings enabled.

Thu Dec 15 18:14:27 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * Makefile.in (AS_FOR_TARGET, OBJDUMP_FOR_TARGET): Don't set.
        (uninstall): Don't set OBJDUMP and OBJDUMPFLAGS in site.exp.
        * config/default.exp: Default OBJDUMP and OBJDUMPFLAGS.  Use
        findfile and transform procedures to determine objdump program
        name.

        * gas/mips/abs.s, gas/mips/div.s: Force some padding at the end,
        in case the format doesn't automatically require it.
        * gas/mips/beq.d, gas/mips/jal.d: Handle MIPS_JMP as an alternate
        name for the reloc type.

        * lib/gas-defs.exp (file_contents, verbose_eval): New procs.
        (run_dump_test): If verbosity level is over 3, print out dump
        command and its output.

Tue Dec 13 18:21:09 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/jal-svr4pic.d: Fix 0-strings to work with 64-bit hosted
        disassembly.

Fri Dec  9 19:54:04 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/all/gas.exp (comment.s test): Make the "\r" optional, since
        it depends on tty modes.

        * lib/gas-defs.exp (gas_start): Try using -nottycopy instead of
        -nottyinit.

        * gas/arm/gas.exp: The arm6 test should report errors, for now.

Thu Dec  8 20:19:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * lib/gas-defs.exp: Use -i in expect_after command.

Wed Dec  7 16:49:14 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mul.d,jal.d: Fix 0-strings to work with 64-bit hosted
        disassembly.

        * gas/ieee-fp: Renamed from ieee.fp.

        * lib/gas-defs.exp: Make sure timeout is at least 2 minutes.

Wed Nov 30 10:48:00 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/parse: Renamed from gas/hppa/more.parse.

Mon Nov 28 00:40:26 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp (nosubspace.s): No longer expected
        to fail.  Fix comments for the test.  Tweak test name.

Tue Nov 22 23:38:20 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Minor tweaks to match current PA ELF
        output. 

Fri Nov 18 17:56:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/ld.d: Adjust to work for both big and little endian
        code.
        * gas/mips/ld.s, gas/mips/lif-empic.d: Likewise.
        * gas/mips/lifloat.d, gas/mips/ulh-empic.d: Likewise.
        * gas/mips/ulh.d, gas/mips/ulw.d, gas/mips/ush.d: Likewise.
        * gas/mips/usw.d: Likewise.

Tue Nov 15 11:09:57 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/align4.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

        * gas/hppa/unsorted/unsorted.exp (importbug): Tweak to match
        current expected PA ELF output.
        * gas/hppa/reloc/reloc.exp (do_r_no_reloc): Likewise.
        (do_plabel_relocation_test): Likewise.

Thu Nov  3 18:14:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/all/p1480.s: Use larger constant, so expression can have a
        positive value.
        * gas/all/gas.exp: Expect p1480.s without listings to pass.

Thu Nov  3 15:43:46 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/ulh.d, gas/mips/ulw.d, gas/mips/ush.d, gas/mips/usw.d:
        Correct test cases.

Thu Oct 20 00:55:13 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/blebug3.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Mon Oct 17 02:33:53 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reduce3.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Sun Oct 16 22:25:56 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (r_no_reloc): Tweak output to match
        current reality.

Wed Sep 28 21:21:34 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reduce.s: Renamed from relocreduce.s
        * gas/hppa/reloc/reduce2.s: Renamed from relocreduce2.s
        * gas/hppa/reloc/r_no_reloc.s: Renamed from r_no_relocbug.s
        * gas/hppa/reloc/reloc.exp: Changed accordingly.

Wed Sep 28 13:25:10 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips/beq.d, gas/mips/beq.s: Test that unconditional branch
        overflows are correctly converted to jumps.

Mon Sep 26 17:41:43 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips: Add test cases for PIC code, both SVR4 style and
        -membedded-pic style.

Fri Sep 23 14:45:42 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips: New directory with MIPS specific test cases.

        * lib/gas-defs.exp (run_dump_test): Permit the .d file to specify
        the name of the source file to assemble.
        (regexp_diff): Put the reason for failure in the log file.

Wed Sep 21 13:44:21 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * lib/gas-defs.exp: Don't try to use shell redirection, since TCL
        doesn't support it.  Redirect stdout using > instead of 1>, and
        don't bother to redirect stderr since TCL redirects it anyhow.
        (run_dump_test): Pass appropriate arguments to program, defaulting
        to -r.

Sat Sep 17 01:04:56 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/vax: New directory.
        * gas/vax/{quad.s,quad.exp}: New test, for immediate quadword
        values.

Mon Sep 12 22:19:11 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/r_no_relocbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

        * gas/hppa/reloc/reloc.exp (do_function_reloc_bug): Update
        expected output.

Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)

        * gas/arm/*: New subtree.  Add ARM tests.

Mon Aug  8 12:13:31 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp: Accept any character
        between foo's type and foo itself.

Fri Jul 15 19:09:25 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (run_dump_test): New routine for running the
        assembler, running objdump or nm (not fully supported) on the
        resulting object file, and comparing the results against a file of
        regular expressions in the test suite, all in one command.
        Options for the assembler and objdump are read from comments at
        the start of the .d file.
        (fail_phase, slurp_options): New auxiliary routines.
        (regexp_diff): Always return a value.  Fix bugs in actually doing
        the regexp test.

        * gas/sun4/addend.exp: Use run_dump_test.
        * gas/sun4/addend.d: Fix regular expressions so that they work.

Thu Jul  7 11:55:33 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/relocreduce2.s: More relocation reduction tests.
        * gas/hppa/reloc/reloc.exp: Run them.

Thu Jun 30 18:49:25 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * config/default.exp: Look for "as.new" in "$base_dir/..", where
        it got compiled, not in "$base_dir".
        * config/unknown.exp: Deleted.

Sun Jun 26 13:23:54 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/lib/gas-defs.exp (gas_finish): Call "close" and "wait"
        before exiting.  Enclose both calls inside a "catch".
        (objdump_finish): Likewise.

Fri Jun 10 10:23:35 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (roundmode test): Tweak expected output
        for SOM to match current testcase.

Thu Jun  2 19:46:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/i386/{pushw.s,pushw.l}: New test.
        * gas/i386/all.exp: Run it.

        * Makefile.in (distclean): Remove site config files and gas.sum.

Fri May 27 12:24:18 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/m68k/disperr.s: Use % for registers.

        * gas/m68k-coff/gas.exp: Expect failure for p2389a.s.

Tue May 17 14:53:08 1994  Bill Cox  (bill@rtl.cygnus.com)

        * lib/gas-defs.exp: Replace error proc calls with perror calls.

Mon May 16 13:19:16 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Tweak expected output to match new
        ELF code.
        * gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
        not support them.
        * gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
        new ELF code.

Thu May  5 17:27:54 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * config/default.exp: Renamed from unix-gas.exp.

Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)

        * Makefile.in (check): Set TCL_LIBRARY for runtest.

Mon Apr 11 07:54:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/callinfobug.s: Add missing name for
        procedure.

        * gas/hppa/reloc/funcrelocbug.s: Place the trampoline in the
        $DATA$ rather than $LIT$ subspace.

Sun Mar 27 14:05:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/funcrelocbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Thu Mar 17 13:38:04 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/importbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Wed Mar 16 11:57:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/regpopbug.s: Add trivial .equ test.

        * gas/hppa/unsorted/globalbug.s: New test (expected to fail).
        * gas/hppa/unsorted/unsorted.exp: Run it.

        * gas/hppa/more.parse/callinfobug.s: New test.
        * gas/hppa/omre.parse/parse.exp: Run it.

        * gas/hppa/more.parse/regpopbug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

Mon Feb 28 14:10:04 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (objdump): New proc.
        (objdump_start): Deleted unused proc.
        (objdump_start_common): Merged into objdump_start_no_subdir.

        * gas/alpha/fp.exp: Use objdump instead of
        objdump_start_no_subdir, since the former actually waits for
        objdump to finish.  Specify .rdata section only.  Make comment
        indicate Alpha architecture rather than SPARC.
        * gas/alpha/fp.d: Omit .reginfo patterns.  Just use "." to match
        against ASCII code 0x2a ("*", special in regexp).
        * gas/sun4/addend.exp: Use objdump instead of
        objdump_start_no_subdir.

Thu Feb 24 07:11:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp (no subspace test): Only expect
        a failure if gas is not producing an ELF object.

Mon Feb 14 09:24:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fmemLRbug.s: New test.
        * gas/hppa/basic/basic.exp: Run it.

Thu Feb 10 00:34:26 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/alpha/fp.*: New files.
        * lib/gas-defs.exp (regexp_diff): Report noted mismatch at
        verbosity level 3 or above only.

Mon Feb  7 15:53:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/*/*.exp: Change xfails to check for PA ELF rather than
        PA OSF1.

Fri Feb  4 23:42:14 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/xmpyubug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

Fri Feb  4 17:13:20 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (regexp_diff): New procedure, vaguely based on
        "simple_diff" from linker test suite.
        * gas/sun4/addend.exp: Use it.
        * gas/sun4/addend.d: New file.

Sun Jan 30 23:34:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/all/gas.exp: Adjust regexp for x930509.s for current listing
        format.

Thu Jan 20 16:44:51 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * gas/all/gas.exp, lib/gas-defs.exp, sun4/addend.exp,
        sparc-solaris/addend.exp: Tweaked to fix a few bugs and to run
        well under either version of expect.

Mon Jan 17 00:25:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fp_misc.s: Delete copr instruction.  It's tested
        elsewhere now.
        * gas/hppa/basic/{copr, coprmem, spop}.s: New tests.
        * gas/hppa/basic/basic.exp: Run them.

Thu Jan 13 11:59:22 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/all/gas.exp: No longer expect difference of forward
        references to fail.
        * gas/all/x930509.s: Fix testcase to match how the expect code was
        written.

Wed Jan 12 13:41:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Fix typo in last change.  Latest test
        for cross-subspace call bugs is no longer expected to fail.

        * gas/hppa/more.parse/procbug.s: Add test for another bug relating
        to having a function's label follow the .PROC directive.

Tue Jan 11 21:47:48 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Add test for cross-subspace call bug
        found while working on multiple $CODE$ subspace support.

Mon Jan 10 09:54:15 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp: procbug.s is no longer expected
        to fail.
        * gas/hppa/more.parse/procbug.s: Add missing .procend.

Mon Jan  3 10:07:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/labelbug.s: Add testcase for bug in last
        app.c change.

Wed Dec 29 11:32:39 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/labelbug.s: Add more colonless label tests.

Wed Dec 15 08:24:31 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

        * Makefile.in (site.exp): Don't set ASFLAGS.  Quote value of
        OBJDUMPFLAGS in case it's empty.  Use temporary names until the
        end; make creating site.exp the final step.
        (check): Pass in ASFLAGS.

        * gas/all/gas.exp: Use all_ones proc.  Change regexp for matching
        C comments to avoid bugs in latest expect code.

Wed Dec  8 14:30:14 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/m68k/disperr.s: New test.
        * gas/m68k/all.exp: Run it.

Sun Dec  5 19:24:57 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/roundmode.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.  Fix typo in last change.

Wed Dec  1 10:44:18 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Run the first half of bogus R_EXIT
        test for ELF.  

Tue Nov 30 13:43:21 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp: Test for error on for subspace
        directive is an XFAIL for SOM assmeblers.

        * gas/hppa/reloc/reloc.exp: Remove XFAIL for relocation on
        cross-subspace call test.

Sun Nov 28 12:12:50 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/appbug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

        * gas/hppa/unsorted/align3.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Sat Nov 27 22:50:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/all/p2425.s: Insert a tab before assembler directives so
        that the directives are not interpreted as labels.

        * gas/hppa/basic/weird.s: Sync with GDB version.

        * gas/hppa/more.parse/labelbug.s: New test.

        * gas/hppa/more.parse/parse.exp: Run it.

Wed Nov 24 01:25:03 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/fixupbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

        * gas/hppa/reloc/exitbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Sun Nov 21 22:11:10 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Minor fixes so that SOM & ELF can
        share the same test code.
        * gas/hppa/reloc/relocreduce.s: Likewise.

        * gas/hppa/basic/fmem.s: Add quadword FP store instructions.
        * gas/hppa/basic/basic.exp: Test quadword FP store instructions.

Sun Nov  7 00:31:41 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: No longer expect failure for
        field selector on ble instruction test.

        * gas/hppa/basic/basic.exp: No longer expect failures for
        system instruction tests now that probei is fixed.

Sat Nov  6 22:45:08 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/selectorbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Thu Nov  4 17:01:30 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/fragbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Thu Nov 04 09:09:49 1993  Jeffrey Wheat  (cassidy@cygnus.com)

        * Makefile.in: Changed RUNTESTFLAGS to RUNTEST_FLAGS

Tue Nov  2 22:12:30 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/{defbug.s, stdreg.s}: New tests.
        * gas/hppa/more.parse/parse.exp: Run them.

Mon Nov  1 23:37:58 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (reloc_reduce): Correct offsets at
        which specific relocations are expected to be found.
        
Sat Oct 30 14:12:31 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp (ss_align): Remove OSF xfail.

        * gas/hppa/more.parse/parse.exp: Add new test.
        * gas/hppa/more.parse/ssbug.s: New test to make sure non-default
        sections are handled correctly.

        * gas/all/gas.exp: Disable (and fail) p1480.s for all PA targets.

Fri Oct 29 16:29:06 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/calldatabug.s: Colonize.
        * gas/hppa/more.parse/parse.exp: Fix typos.

Thu Oct 28 21:40:06 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/{basic, more.parse, reloc, unsorted}: New directories.
        * gas/hppa/*/*.exp: New test drivers.
        * gas/hppa/*/*.s: New test files.

Mon Oct 25 09:40:59 1993  Ken Raeburn  (raeburn@cygnus.com)

        * gas/sun4: New directory.
        * gas/sun4/addend.s,addend.exp: New test case.
        * gas/sparc-solaris/addend.s,addend.exp: Solaris version of same
        test case.

        * gas/all/gas.exp: Check `*' in C comments.

        * lib/gas-defs.exp (all_ones): New procedure, for a predicate to
        simplify some tests.
        (want_no_output): Return zero or nonzero, depending on success or
        failure.
        (gas_test_old): Return value from want_no_output.
        (objdump_start_common): Split off from objdump_start.
        (objdump_start_no_subdir): New procedure.

Wed Oct 20 07:25:48 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

        * gas/all/diff1.s, gas/m68k/pic1.s: New tests.
        * gas/all/gas.exp, gas/m68k/all.exp: Run them.

        * Makefile.in (OBJDUMP_FOR_TARGET): Define similar to
        AS_FOR_TARGET.
        (check): Don't pass ASFLAGS variable.
        (site.exp): Put ASFLAGS, OBJDUMP, OBJDUMPFLAGS into site.exp.

        From Jeff Law:

        * lib/gas-defs.exp (objdump_start, objdump_finish): New functions
        so that tests can parse the output of objdump looking for errors
        in relocation entires, file headers and the like.

Thu Sep 23 16:20:34 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/ieee.fp/x930509a.exp: Currently expected to fail always.
        * gas/all/gas.exp (p1480.s, x930509.s): Ditto.  Break up gas_test
        call so it no longer performs multiple tests.
        * gas/m68k/all.exp (t2.s): Don't bother with listings.
        (p2410.s): Don't pass unwanted arguments to gas_test_error.

Wed Aug 25 16:50:08 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * lib/do*: Remove RCS id strings.

Mon May 17 15:09:45 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * gas/all/float.s, gas/all/p1480.s, gas/m68k/p2410.s: New tests.
        * gas/all/gas.exp, gas/m68k/all.exp: Run them.
        * gas/i386: New directory.

Mon May 10 14:50:20 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * Added directory structure, to categorize tests by targets.
        * Added new tests all/x930509.s, ieee.fp/x930509a.s, m68k/p2663.s,
        and refined some to examine the assembler listing output.
        * lib/gas-defs.exp: Renamed gas_start to gas_run.  Added some
        expect_after patterns.
        (gas_start, gas_finish): New procs, for tests that examine process
        output.
        * config/unix-gas.exp: Invoke gas_init directly, instead of
        requiring test .exp files do it.

Wed Apr 21 01:24:16 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/gas.exp: Handle new tests, and changes to testing procs.

        * lib/gas-defs.exp (want_no_output): New proc; success iff output
        is empty.
        (gas_test_old): Functionally same as old gas_test.
        (gas_test_ignore_stdout): Rewritten to use want_no_output.
        (gas_test): New argument lists set of options to be tried in
        combinations.  Option with trailing ">" indicates standard output
        should be ignored.

        * gas/p2425a.s: Use %-form for registers, so this test can be run
        on m68k-coff targets too.

        * gas/p2430a.s: New test case, whitespace &c matches customer
        report more closely.  Gets different results from p2430.s; this is
        bad, and not yet tested for.

Mon Apr  5 12:27:19 1993  Ken Raeburn  (raeburn@cygnus.com)

        * gas/p2389a.s, gas/p2411.s, gas/t2.s: New test cases.
        * lib/run: New script.
        * gas/gas-defs.exp (gas_start): Takes new args, assembler options
        and redirection options.  Use "run" script so redirection works.
        (gas_test): Now takes assembler options as separate arg from input
        file name.
        (gas_test_ignore_stdout): New proc.  Discards output.
        (gas_test_error): New proc.  Expects assembler to generate output.
        (target_cpu_family setting): Handle i486->i386 also.

        * lib/do*: Scripts moved here from gas/testscripts.  May be useful
        someday for writing more test cases; not currently used.

Tue Mar 30 11:45:27 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/sol-gcc.s, gas/sol-cc.s, gas/p2425a.s, gas/p2389.s: New test
        cases.
        * gas/gas.exp: Enable them for appropriate targets.  Removed some
        useless comments &c.  Changed m68k target test to be more general.

        * lib/gas-defs.exp (gas_exit, gas_init): New procs.
        * gas/gas.exp: Call gas_init.

Mon Mar 29 00:00:00 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

        * Test suite created.