gas/testsuite/gas/mips/mips.exp

   1 #
   2 # Some generic MIPS tests
   3 #
   4
   5 # When adding a new test to this file, try to do the following things:
   6 #
   7 # * If testing assembly and disassembly of code, don't forget to test
   8 # the actual bit encodings of the instructions (using the
   9 # --show-raw-insn flag to objdump).
  10 #
  11 # * Try to run the test for as many architectures as appropriate,
  12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  13 # along with the output from a call to "mips_arch_list_matching."
  14 #
  15 # * Be sure to compare the test output before and after your testsuite
  16 # changes, to verify that existing and new tests were run as expected.
  17 # Look for expect ERROR messages in the testsuite .log file to make sure
  18 # the new expect code did not contain errors.
  19
  20 # To add support for a new CPU to this file, add an appropriate entry
  21 # to the sequence of "mips_arch_create" function calls below, and test
  22 # the result.  The new CPU should automatically be used when running
  23 # various tests.  If the new CPU is the default CPU for any tool
  24 # targets, make sure the call to "mips_arch_create" reflects that fact.
  25
  26
  27 # "LOSE" marks information about tests which fail at a particular point
  28 # in time, but which are not XFAILed.  Either they used to pass
  29 # and indicate either regressions or the need to tweak the tests to keep
  30 # up the with code, or they are new tests and it is unknown whether or not
  31 # they should pass as-is for the given object formats.
  32
  33
  34 # The functions below create and manipulate an "architecture data
  35 # array" which contains entries for each MIPS architecture (or CPU)
  36 # known to these tests.  The array contains the following information
  37 # for each architecture, indexed by the name of the architecture
  38 # described by the entry:
  39 #
  40 # displayname: The name of the entry to be used for pretty-printing.
  41 #
  42 # gprsize: The size in bits of General Purpose Registers provided by
  43 # the architecture (must be 32 or 64).
  44 #
  45 # props: A list of text strings which are associated with the
  46 # architecture.  These include the architecture name as well as
  47 # information about what instructions the CPU supports.  When matching
  48 # based on properties, an additional property is added to the normal
  49 # property list, "gpr<gprsize>" so that tests can match CPUs which
  50 # have GPRs of a specific size.  The following properties are most
  51 # useful when matching properties for generic (i.e., not CPU-specific)
  52 # tests:
  53 #
  54 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  55 #               The architecture includes the instructions defined
  56 #               by that MIPS ISA.
  57 #
  58 #       fpisa3, fpisa4, fpisa5
  59 #               The architecture includes the floating-point
  60 #               instructions defined by that MIPS ISA.
  61 #
  62 #       gpr_ilocks
  63 #               The architecture interlocks GPRs accesses.  (That is,
  64 #               there are no load delay slots.)
  65 #
  66 #       mips3d  The architecture includes the MIPS-3D ASE.
  67 #
  68 #       ror     The architecture includes hardware rotate instructions.
  69 #
  70 #       gpr32, gpr64
  71 #               The architecture provides 32- or 64-bit General Purpose
  72 #               Registers.
  73 #
  74 # as_flags: The assembler flags used when assembling tests for this
  75 # architecture.
  76 #
  77 # objdump_flags: The objdump flags used when disassembling tests for
  78 # this architecture.
  79 #
  80 # Most entries in the architecture array will have values in all of
  81 # the fields above.  One entry, "default" represents the default CPU
  82 # based on the target of the assembler being built.  If always has
  83 # empty "as_flags" and "objdump_flags."
  84
  85 # mips_arch_init
  86 #
  87 # This function initializes the architecture data array ("mips_arches")
  88 # to be empty.
  89 proc mips_arch_init {} {
  90     global mips_arches
  91
  92     # Catch because the variable won't be set the first time through.
  93     catch {unset mips_arches}
  94 }
  95
  96 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
  97 #                  (optional:) DEFAULT_FOR_TARGETS
  98 #
  99 # This function creates a new entry in the architecture data array,
 100 # for the architecture or CPU named ARCH, and fills in the entry
 101 # according to the rest of the arguments.
 102 #
 103 # The new entry's property list is initialized to contain ARCH, any
 104 # properties specified by PROPS, and the properties associated with
 105 # the entry specified by EXTENDS.  (The new architecture is considered
 106 # to extend the capabilities provided by that architecture.)
 107 #
 108 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 109 # this architecture is the default architecture.  If "istarget" returns
 110 # true for any of the targets in the list, a "default" entry will be
 111 # added to the architecture array which indicates that ARCH is the default
 112 # architecture.
 113 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 114                        {default_for_targets {}}} {
 115     global mips_arches
 116
 117     if { [info exists mips_arches($arch)] } {
 118              error "mips_arch_create: arch \"$arch\" already exists"
 119     }
 120     if { $gprsize != 32 && $gprsize != 64 } {
 121         error "mips_arch_create: invalid GPR size $gprsize"
 122     }
 123
 124     set archdata(displayname) $arch
 125     set archdata(gprsize) $gprsize
 126     set archdata(as_flags) $as_flags
 127     set archdata(objdump_flags) $objdump_flags
 128     set archdata(props) $arch
 129     eval lappend archdata(props) $props
 130     if { [string length $extends] != 0 } {
 131         eval lappend archdata(props) [mips_arch_properties $extends 0]
 132     }
 133
 134     set mips_arches($arch) [array get archdata]
 135
 136     # Set as default if appropriate.
 137     foreach target $default_for_targets {
 138         if { [istarget $target] } {
 139             if { [info exists mips_arches(default)] } {
 140                 error "mips_arch_create: default arch already exists"
 141             }
 142
 143             set archdata(displayname) "default = $arch"
 144             set archdata(as_flags) ""
 145             set archdata(objdump_flags) ""
 146
 147             set mips_arches(default) [array get archdata]
 148             break
 149         }
 150     }
 151 }
 152
 153 # mips_arch_destroy ARCH
 154 #
 155 # The opposite of the above.  This function removes an entry from
 156 # the architecture data array, for the architecture or CPU named ARCH.
 157
 158 proc mips_arch_destroy {arch} {
 159     global mips_arches
 160
 161     if { [info exists mips_arches($arch)] } {
 162         unset mips_arches($arch)
 163     }
 164 }
 165
 166 # mips_arch_list_all
 167 #
 168 # This function returns the list of all names of entries in the
 169 # architecture data array (including the default entry, if a default
 170 # is known).
 171 proc mips_arch_list_all {} {
 172     global mips_arches
 173     return [lsort -dictionary [array names mips_arches]]
 174 }
 175
 176 # mips_arch_data ARCH
 177 #
 178 # This function returns the information associated with ARCH
 179 # in the architecture data array, in "array get" form.
 180 proc mips_arch_data {arch} {
 181     global mips_arches
 182
 183     if { ! [info exists mips_arches($arch)] } {
 184         error "mips_arch_data: unknown arch \"$arch\""
 185     }
 186     return $mips_arches($arch)
 187 }
 188
 189 # mips_arch_displayname ARCH
 190 #
 191 # This function returns the printable name associated with ARCH in
 192 # the architecture data array.
 193 proc mips_arch_displayname {arch} {
 194     array set archdata [mips_arch_data $arch]
 195     return $archdata(displayname)
 196 }
 197
 198 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 199 #
 200 # This function returns the property list associated with ARCH in the
 201 # architecture data array, including the "canonical" target name as the
 202 # first element.
 203 #
 204 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 205 # property will be returned as part of the list based on the
 206 # architecture's GPR size.
 207 proc mips_arch_properties {arch {include_gprsize 1}} {
 208     array set archdata [mips_arch_data $arch]
 209     set props $archdata(props)
 210     if { $include_gprsize } {
 211         lappend props gpr$archdata(gprsize)
 212     }
 213     return $props
 214 }
 215
 216 # mips_arch_as_flags ARCH
 217 #
 218 # This function returns the assembler flags associated with ARCH in
 219 # the architecture data array.
 220 proc mips_arch_as_flags {arch} {
 221     array set archdata [mips_arch_data $arch]
 222     return $archdata(as_flags)
 223 }
 224
 225 # mips_arch_objdump_flags ARCH
 226 #
 227 # This function returns the objdump disassembly flags associated with
 228 # ARCH in the architecture data array.
 229 proc mips_arch_objdump_flags {arch} {
 230     array set archdata [mips_arch_data $arch]
 231     return $archdata(objdump_flags)
 232 }
 233
 234 # mips_arch_matches ARCH PROPMATCHLIST
 235 #
 236 # This function returns non-zero if ARCH matches the set of properties
 237 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 238 # be the name of a property which must be matched, or "!" followed by
 239 # the name of a property which must not be matched.  ARCH matches
 240 # PROPMATCHLIST if and only if all of the conditions specified by
 241 # PROPMATCHLIST are satisfied.
 242 proc mips_arch_matches {arch propmatchlist} {
 243     foreach pm $propmatchlist {
 244         if { [string match {!*} $pm] } {
 245             # fail if present.
 246             set inverted 1
 247             set p [string range $pm 1 end]
 248         } {
 249             # fail if not present.
 250             set inverted 0
 251             set p $pm
 252         }
 253
 254         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 255
 256         # required-absent and found, or required-present and not found: fail.
 257         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 258             return 0
 259         }
 260     }
 261     return 1
 262 }
 263
 264 # mips_arch_list_matching ARGS
 265 #
 266 # This function returns a list of all architectures which match
 267 # the conditions described by its arguments.  Its arguments are
 268 # taken as a list and used as the PROPMATCHLIST in a call to
 269 # "mips_arch_matches" for each known architecture.
 270 proc mips_arch_list_matching {args} {
 271     set l ""
 272     foreach arch [mips_arch_list_all] {
 273         # For now, don't match default arch until we know what its
 274         # properties actually are.
 275         if { [string compare $arch default] == 0
 276              && [string length [mips_arch_properties default]] == 0} {
 277             continue
 278         }
 279         if { [mips_arch_matches $arch $args] } {
 280             lappend l $arch
 281         }
 282     }
 283     return $l
 284 }
 285
 286
 287 # The functions below facilitate running various types of tests.
 288
 289 # run_dump_test_arch NAME ARCH
 290 #
 291 # Invoke "run_dump_test" for test NAME, with extra assembler and
 292 # disassembler flags to test architecture ARCH.
 293 #
 294 # You can override the expected output for particular architectures
 295 # and file formats.  The possible test names are, in order of preference:
 296 #
 297 # 1. CARCH@FORMAT@NAME.d
 298 # 2. CARCH@NAME.d
 299 # 3. FORMAT@NAME.d
 300 # 4. NAME.d
 301 #
 302 # where CARCH is the "canonical" name of architecture ARCH as recorded
 303 # in its associated property list, and where FORMAT is the target's
 304 # file format (one of "elf", "ecoff" or "aout").
 305 proc run_dump_test_arch { name arch } {
 306     upvar elf elf ecoff ecoff aout aout
 307     global subdir srcdir
 308
 309     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 310     set proparch [lindex [mips_arch_properties $arch 0] 0]
 311     foreach prefix [list ${proparch}@${format}@ ${proparch}@ ${format}@] {
 312         set archname ${prefix}${name}
 313         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 314             set name $archname
 315             break
 316         }
 317     }
 318
 319     if [catch {run_dump_test $name \
 320                              "{name    {([mips_arch_displayname $arch])}}
 321                               {objdump {[mips_arch_objdump_flags $arch]}}
 322                               {as      {[mips_arch_as_flags $arch]}}"} rv] {
 323         perror "$rv"
 324         untested "$subdir/$name ($arch)"
 325     }
 326 }
 327
 328 # run_dump_test_arches NAME ARCH_LIST
 329 #
 330 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 331 # listed in ARCH_LIST.
 332 proc run_dump_test_arches { name arch_list } {
 333     upvar elf elf ecoff ecoff aout aout
 334     foreach arch $arch_list {
 335         run_dump_test_arch "$name" "$arch"
 336     }
 337 }
 338
 339 # run_list_test_arch NAME OPTS ARCH
 340 #
 341 # Invoke "run_list_test" for test NAME with options OPTS, with extra
 342 # assembler flags to test architecture ARCH.
 343 proc run_list_test_arch { name opts arch } {
 344     global subdir
 345
 346     set testname "MIPS $name ([mips_arch_displayname $arch])"
 347     if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
 348                              "$testname"} rv] {
 349         perror "$rv"
 350         untested "$testname"
 351     }
 352 }
 353
 354 # run_list_test_arches NAME OPTS ARCH_LIST
 355 #
 356 # Invoke "run_list_test_arch" for test NAME with options OPTS, for each
 357 # architecture listed in ARCH_LIST.
 358 proc run_list_test_arches { name opts arch_list } {
 359     foreach arch $arch_list {
 360         run_list_test_arch "$name" "$opts" "$arch"
 361     }
 362 }
 363
 364
 365 # Create the architecture data array by providing data for all
 366 # known architectures.
 367 #
 368 # Note that several targets pick default CPU based on ABI.  We
 369 # can't easily handle that; do NOT list those targets as defaulting
 370 # to any architecture.
 371 mips_arch_init
 372 mips_arch_create mips1  32      {}      {} \
 373                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 374 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 375                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 376 mips_arch_create mips3  64      mips2   { fpisa3 } \
 377                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 378 mips_arch_create mips4  64      mips3   { fpisa4 } \
 379                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 380 mips_arch_create mips5  64      mips4   { fpisa5 } \
 381                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 382 mips_arch_create mips32 32      mips2   {} \
 383                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 384                         { mipsisa32-*-* mipsisa32el-*-* }
 385 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 386                         { -march=mips32r2 -mtune=mips32r2 } \
 387                         { -mmips:isa32r2 } \
 388                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 389 mips_arch_create mips64 64      mips5   { mips32 } \
 390                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 391                         { mipsisa64-*-* mipsisa64el-*-* }
 392 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 393                         { -march=mips64r2 -mtune=mips64r2 } \
 394                         { -mmips:isa64r2 } \
 395                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 396 mips_arch_create mips16 32      {}      {} \
 397                         { -march=mips1 -mips16 } { -mmips:16 }
 398 mips_arch_create micromips 64   mips64r2 {} \
 399                         { -march=mips64 -mmicromips } {}
 400 mips_arch_create r3000  32      mips1   {} \
 401                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 402 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 403                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 404                         { mipstx39-*-* mipstx39el-*-* }
 405 mips_arch_create r4000  64      mips3   {} \
 406                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 407 mips_arch_create vr5400 64      mips4   { ror } \
 408                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 409 mips_arch_create sb1    64      mips64  { mips3d } \
 410                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 411                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 412 mips_arch_create octeon 64      mips64r2 {} \
 413                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 414                         { mips64octeon*-*-* }
 415 mips_arch_create xlr    64      mips64  {} \
 416                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 417
 418 #
 419 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 420 # relocations, so most of the generic dump tests will not work there.
 421 #
 422 if { [istarget mips*-*-vxworks*] } {
 423     run_dump_test "vxworks1"
 424     run_dump_test "vxworks1-xgot"
 425     run_dump_test "vxworks1-el"
 426     run_dump_test "vxworks1-xgot-el"
 427 } elseif { [istarget mips*-*-*] } {
 428     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 429     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 430     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 431     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 432     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
 433     set no_mips16 [expr !$elf]
 434     set no_micromips [expr !$elf]
 435
 436     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 437         set tmips "t"
 438     } else {
 439         set tmips ""
 440     }
 441     if [istarget mips*el-*-*] {
 442         set el "el"
 443     } {
 444         set el ""
 445     }
 446     if { $no_mips16 } {
 447         mips_arch_destroy mips16
 448     }
 449     if { $no_micromips } {
 450         mips_arch_destroy micromips
 451     }
 452
 453     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 454     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 455     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 456     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 457     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 458                                         [mips_arch_list_matching mips1]
 459     run_dump_test "break20"
 460     run_dump_test "trap20"
 461
 462     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 463     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 464     # more information.  Not sure if the fixes there are correct; should
 465     # branches to external labels be allowed for ECOFF?
 466     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 467     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 468     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 469     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 470     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 471     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 472     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 473     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 474     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 475     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 476     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 477     run_dump_test "branch-misc-3"
 478     run_dump_test "branch-swap"
 479     run_dump_test "div"
 480
 481     if { !$addr32 } {
 482         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 483     }
 484     if $elf {
 485         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 486     } else {
 487         run_dump_test "jal"
 488     }
 489     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 490     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 491     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 492     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 493     run_dump_test "eret-1"
 494     run_dump_test "eret-2"
 495     run_dump_test "eret-3"
 496     run_dump_test_arches "24k-branch-delay-1" \
 497         [mips_arch_list_matching mips1 !micromips]
 498     run_dump_test_arches "24k-triple-stores-1" \
 499         [mips_arch_list_matching fpisa5 !octeon !micromips]
 500     run_dump_test_arches "24k-triple-stores-2" \
 501         [mips_arch_list_matching mips2 !micromips]
 502     run_dump_test_arches "24k-triple-stores-3" \
 503         [mips_arch_list_matching mips2 !micromips]
 504     run_dump_test_arches "24k-triple-stores-4" \
 505         [mips_arch_list_matching mips2 !micromips]
 506     run_dump_test_arches "24k-triple-stores-5" \
 507         [mips_arch_list_matching mips1 !micromips]
 508     run_dump_test_arches "24k-triple-stores-6" \
 509         [mips_arch_list_matching mips2 !micromips]
 510     run_dump_test_arches "24k-triple-stores-7" \
 511         [mips_arch_list_matching mips2 !micromips]
 512     run_dump_test_arches "24k-triple-stores-8" \
 513         [mips_arch_list_matching mips1 !micromips]
 514     run_dump_test_arches "24k-triple-stores-9" \
 515         [mips_arch_list_matching mips1 !micromips]
 516     run_dump_test_arches "24k-triple-stores-10" \
 517         [mips_arch_list_matching mips1 !micromips]
 518     if $elf {
 519         run_dump_test_arches "24k-triple-stores-11" \
 520             [mips_arch_list_matching mips1 !micromips]
 521     }
 522
 523     if $elf {
 524         run_dump_test_arches "jal-svr4pic" \
 525                                         [mips_arch_list_matching mips1]
 526         run_dump_test_arches "jal-svr4pic-noreorder" \
 527                                         [mips_arch_list_matching mips1]
 528     }
 529     if $elf { run_dump_test "jal-xgot" }
 530     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 531     if $has_newabi { run_dump_test "jal-newabi" }
 532     if !$aout { run_dump_test "la" }
 533     if $elf { run_dump_test "la-svr4pic" }
 534     if $elf { run_dump_test "la-xgot" }
 535     if $elf { run_dump_test "lca-svr4pic" }
 536     if $elf { run_dump_test "lca-xgot" }
 537     if !$aout {
 538         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 539         # (Should split and then use appropriate arch lists.)
 540         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 541     }
 542     if $elf {
 543         run_dump_test_arches "lb-svr4pic" \
 544                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 545         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 546     }
 547     if $elf {
 548         # Both versions specify the cpu, so we can run both regardless of
 549         # the interlocking in the configured default cpu.
 550         run_dump_test "lb-xgot"
 551         run_dump_test "lb-xgot-ilocks"
 552     }
 553     if !$aout {
 554         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 555         run_dump_test_arches "ld-forward" \
 556                                         [mips_arch_list_matching mips1]
 557         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 558         run_dump_test_arches "sd-forward" \
 559                                         [mips_arch_list_matching mips1]
 560         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1]
 561         run_dump_test_arches "l_d-forward" \
 562                                         [mips_arch_list_matching mips1]
 563         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1]
 564         run_dump_test_arches "s_d-forward" \
 565                                         [mips_arch_list_matching mips1]
 566         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2]
 567         run_dump_test_arches "ldc1-forward" \
 568                                         [mips_arch_list_matching mips2]
 569         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2]
 570         run_dump_test_arches "sdc1-forward" \
 571                                         [mips_arch_list_matching mips2]
 572         if $has_newabi {
 573             run_dump_test_arches "ld-n32" \
 574                                         [mips_arch_list_matching mips3]
 575             run_dump_test_arches "ld-forward-n32" \
 576                                         [mips_arch_list_matching mips3]
 577             run_dump_test_arches "sd-n32" \
 578                                         [mips_arch_list_matching mips3]
 579             run_dump_test_arches "sd-forward-n32" \
 580                                         [mips_arch_list_matching mips3]
 581             run_dump_test_arches "l_d-n32" \
 582                                         [mips_arch_list_matching mips3]
 583             run_dump_test_arches "l_d-forward-n32" \
 584                                         [mips_arch_list_matching mips3]
 585             run_dump_test_arches "s_d-n32" \
 586                                         [mips_arch_list_matching mips3]
 587             run_dump_test_arches "s_d-forward-n32" \
 588                                         [mips_arch_list_matching mips3]
 589             run_dump_test_arches "ldc1-n32" \
 590                                         [mips_arch_list_matching mips3]
 591             run_dump_test_arches "ldc1-forward-n32" \
 592                                         [mips_arch_list_matching mips3]
 593             run_dump_test_arches "sdc1-n32" \
 594                                         [mips_arch_list_matching mips3]
 595             run_dump_test_arches "sdc1-forward-n32" \
 596                                         [mips_arch_list_matching mips3]
 597             run_dump_test_arches "ld-n64" \
 598                                         [mips_arch_list_matching mips3]
 599             run_dump_test_arches "ld-forward-n64" \
 600                                         [mips_arch_list_matching mips3]
 601             run_dump_test_arches "sd-n64" \
 602                                         [mips_arch_list_matching mips3]
 603             run_dump_test_arches "sd-forward-n64" \
 604                                         [mips_arch_list_matching mips3]
 605             run_dump_test_arches "l_d-n64" \
 606                                         [mips_arch_list_matching mips3]
 607             run_dump_test_arches "l_d-forward-n64" \
 608                                         [mips_arch_list_matching mips3]
 609             run_dump_test_arches "s_d-n64" \
 610                                         [mips_arch_list_matching mips3]
 611             run_dump_test_arches "s_d-forward-n64" \
 612                                         [mips_arch_list_matching mips3]
 613             run_dump_test_arches "ldc1-n64" \
 614                                         [mips_arch_list_matching mips3]
 615             run_dump_test_arches "ldc1-forward-n64" \
 616                                         [mips_arch_list_matching mips3]
 617             run_dump_test_arches "sdc1-n64" \
 618                                         [mips_arch_list_matching mips3]
 619             run_dump_test_arches "sdc1-forward-n64" \
 620                                         [mips_arch_list_matching mips3]
 621         }
 622     }
 623     if $elf { run_dump_test "ld-svr4pic" }
 624     if $elf { run_dump_test "ld-xgot" }
 625     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 626     if !$aout { run_dump_test "lifloat" }
 627     if $elf { run_dump_test "lif-svr4pic" }
 628     if $elf { run_dump_test "lif-xgot" }
 629     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 630     run_dump_test_arches "mips4-fp"     [mips_arch_list_matching fpisa4]
 631     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 632                                         [mips_arch_list_matching fpisa4]
 633     run_dump_test_arches "mips4-branch-likely" \
 634                                         [mips_arch_list_matching mips4]
 635     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 636                                         [mips_arch_list_matching mips4]
 637     run_dump_test_arches "mips5-fp"     [mips_arch_list_matching fpisa5]
 638     run_dump_test "mul"
 639
 640     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 641     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 642
 643     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 644     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 645
 646     if !$aout { run_dump_test "sb" }
 647     run_dump_test "trunc"
 648     if !$aout { run_dump_test "ulh" }
 649     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 650     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 651     if $elf { run_dump_test "ulh-svr4pic" }
 652     if $elf { run_dump_test "ulh-xgot" }
 653     if !$aout {
 654         run_dump_test "ulw"
 655         run_dump_test "uld"
 656         run_dump_test "ush"
 657         run_dump_test "usw"
 658         run_dump_test "usd"
 659     }
 660     run_dump_test_arches "ulw2-eb" \
 661                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 662     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 663     run_dump_test_arches "ulw2-el" \
 664                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 665     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 666
 667     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 668     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 669
 670     # The mips16 test can only be run on ELF, because only ELF
 671     # supports the necessary mips16 reloc.
 672     if { $elf && !$no_mips16 } {
 673         run_dump_test "mips16"
 674         run_dump_test "mips16-64"
 675         # Check MIPS16e extensions
 676         run_dump_test_arches "mips16e" \
 677                                 [mips_arch_list_matching mips32 !micromips]
 678         # Check jalx handling
 679         run_dump_test "mips16-jalx"
 680         run_dump_test "mips-jalx"
 681         run_dump_test "mips-jalx-2"
 682         # Check MIPS16 HI16/LO16 relocations
 683         run_dump_test "mips16-hilo"
 684         if $has_newabi {
 685             run_dump_test "mips16-hilo-n32"
 686         }
 687         run_dump_test "mips16-hilo-match"
 688     }
 689     run_dump_test "delay"
 690     run_dump_test "nodelay"
 691     run_dump_test "mips4010"
 692     run_dump_test "mips4650"
 693     run_dump_test "mips4100"
 694     run_dump_test "vr4111"
 695     run_dump_test "vr4120"
 696     run_dump_test "vr4120-2"
 697     run_dump_test "vr4130"
 698     run_dump_test "vr5400"
 699     run_dump_test "vr5500"
 700     run_dump_test "rm7000"
 701     run_dump_test "perfcount"
 702     run_dump_test "lineno"
 703     run_dump_test "sync"
 704
 705     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 706     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 707
 708     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 709     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 710                                         [mips_arch_list_matching mips32]
 711     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 712                                             !octeon]
 713
 714     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 715     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 716                                             !octeon]
 717     run_dump_test_arches "mips32r2-fp32" \
 718                                         [mips_arch_list_matching mips32r2]
 719     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 720                                         [mips_arch_list_matching mips32r2]
 721     run_list_test_arches "mips32r2-ill" "-32" \
 722                         [mips_arch_list_matching mips32r2 gpr32]
 723     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 724                         [mips_arch_list_matching mips32r2 gpr64]
 725     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 726                         [mips_arch_list_matching mips32r2]
 727
 728     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 729     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 730                                             !octeon]
 731
 732     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 733     run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
 734
 735     run_dump_test "set-arch"
 736
 737     if { !$addr32 } {
 738         run_dump_test "mips64-mips3d"
 739         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 740
 741         run_dump_test "mips64-mdmx"
 742         run_dump_test "sb1-ext-mdmx"
 743         run_dump_test "sb1-ext-ps"
 744         run_dump_test "xlr-ext"
 745     }
 746
 747     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 748     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 749     run_dump_test "relax-swap1-mips1"
 750     run_dump_test "relax-swap1-mips2"
 751     run_dump_test "relax-swap2"
 752     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 753     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 754                                         [mips_arch_list_matching mips64r2 \
 755                                             !micromips]
 756
 757     run_list_test "illegal" "-32"
 758     run_list_test "baddata1" "-32"
 759     run_list_test "jalr" ""
 760
 761     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 762     # It's unknown whether they _should_ pass as-is, or whether different
 763     # variants are needed for ELF and ECOFF.
 764     run_dump_test "mips-gp32-fp32"
 765     run_dump_test "mips-gp32-fp64"
 766     run_dump_test "mips-gp64-fp32"
 767     run_dump_test "mips-gp64-fp64"
 768
 769     if $elf {
 770         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 771         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 772         # and verify that they're the same.  Specifically, we're checking
 773         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 774         # instruction does get used.  In previous versions of GAS,
 775         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 776         run_dump_test "elf_e_flags1"
 777         run_dump_test "elf_e_flags2"
 778         run_dump_test "elf_e_flags3"
 779         run_dump_test "elf_e_flags4"
 780
 781         # Check EF_MIPS_ARCH markings for each supported architecture.
 782         run_dump_test "elf_arch_mips1"
 783         run_dump_test "elf_arch_mips2"
 784         run_dump_test "elf_arch_mips3"
 785         run_dump_test "elf_arch_mips4"
 786         run_dump_test "elf_arch_mips5"
 787         run_dump_test "elf_arch_mips32"
 788         run_dump_test "elf_arch_mips32r2"
 789         run_dump_test "elf_arch_mips64"
 790         run_dump_test "elf_arch_mips64r2"
 791
 792         # Verify that ASE markings are handled properly.
 793         if { !$no_mips16 } {
 794             run_dump_test "elf_ase_mips16"
 795             run_dump_test "elf_ase_mips16-2"
 796         }
 797         if { !$no_micromips } {
 798             run_dump_test "elf_ase_micromips"
 799             run_dump_test "elf_ase_micromips-2"
 800         }
 801
 802         run_dump_test "mips-gp32-fp32-pic"
 803         run_dump_test "mips-gp32-fp64-pic"
 804         run_dump_test "mips-gp64-fp32-pic"
 805         run_dump_test "mips-gp64-fp64-pic"
 806
 807         run_dump_test "mips-abi32"
 808         run_dump_test "mips-abi32-pic"
 809         run_dump_test "mips-abi32-pic2"
 810
 811         run_dump_test "elf${el}-rel"
 812         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
 813         run_dump_test "e32${el}-rel2"
 814         run_dump_test "elf${el}-rel3"
 815         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 816         run_dump_test "e32-rel4"
 817         run_dump_test "elf-rel5"
 818         run_dump_test "elf-rel6"
 819         if $has_newabi {
 820             run_dump_test "elf-rel6-n32"
 821             run_dump_test "elf-rel6-n64"
 822         }
 823         run_dump_test "elf-rel7"
 824         run_dump_test "elf-rel8"
 825         run_dump_test "elf-rel8-mips16"
 826         run_dump_test "elf-rel9"
 827         run_dump_test "elf-rel9-mips16"
 828         if $has_newabi {
 829             run_dump_test "elf-rel10"
 830             run_dump_test "elf-rel11"
 831         }
 832         run_dump_test "elf-rel12"
 833         run_dump_test "elf-rel13"
 834         run_dump_test "elf-rel13-mips16"
 835         run_dump_test "elf-rel14"
 836
 837         if $has_newabi {
 838             run_dump_test "elf-rel15"
 839             run_dump_test "elf-rel16"
 840
 841             run_dump_test "elf-rel-got-n32"
 842             run_dump_test "elf-rel-xgot-n32"
 843             run_dump_test "elf-rel-got-n64"
 844             run_dump_test "elf-rel-xgot-n64"
 845         }
 846         run_dump_test "elf-rel17"
 847         if $has_newabi {
 848             run_dump_test "elf-rel18"
 849         }
 850         run_dump_test "elf-rel19"
 851         run_dump_test "elf-rel20"
 852         if $has_newabi {
 853             run_dump_test "elf-rel21"
 854             run_dump_test "elf-rel22"
 855             run_dump_test "elf-rel23"
 856             run_dump_test "elf-rel23a"
 857             run_dump_test "elf-rel23b"
 858             run_dump_test "elf-rel24"
 859         }
 860
 861         run_dump_test "elf-rel25"
 862         run_dump_test "elf-rel25a"
 863         run_dump_test "elf-rel26"
 864
 865         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 866
 867         if $has_newabi {
 868             run_dump_test "elf-rel28-n32"
 869             run_dump_test "elf-rel28-n64"
 870         }
 871
 872         if { !$no_mips16 } {
 873             run_dump_test "${tmips}mips${el}16-e"
 874             run_dump_test "${tmips}mips${el}16-f"
 875         }
 876         run_dump_test "elf-consthilo"
 877         run_dump_test "expr1"
 878
 879         run_list_test "tls-ill" "-32"
 880         run_dump_test "tls-o32"
 881         run_dump_test "jalr2"
 882
 883         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 884
 885         run_dump_test_arches "branch-misc-4" \
 886                                         [mips_arch_list_matching mips1]
 887         run_dump_test_arches "branch-misc-4-64" \
 888                                         [mips_arch_list_matching mips3]
 889
 890         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 891         run_dump_test_arches "loc-swap-dis" \
 892                                         [mips_arch_list_all]
 893         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
 894     }
 895
 896     if $has_newabi {
 897         run_dump_test "n32-consec"
 898     }
 899
 900     # tests of objdump's ability to disassemble using different
 901     # register names.
 902     run_dump_test "gpr-names-numeric"
 903     run_dump_test "gpr-names-32"
 904     run_dump_test "gpr-names-n32"
 905     run_dump_test "gpr-names-64"
 906
 907     run_dump_test "fpr-names-numeric"
 908     run_dump_test "fpr-names-32"
 909     run_dump_test "fpr-names-n32"
 910     run_dump_test "fpr-names-64"
 911
 912     run_dump_test "cp0-names-numeric"
 913     run_dump_test "cp0-names-r3000"
 914     run_dump_test "cp0-names-r4000" \
 915                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 916     run_dump_test "cp0-names-r4000" \
 917                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 918     run_dump_test "cp0-names-mips32"
 919     run_dump_test "cp0-names-mips32r2"
 920     run_dump_test "cp0-names-mips64"
 921     run_dump_test "cp0-names-mips64r2"
 922     run_dump_test "cp0-names-sb1"
 923
 924     run_dump_test "cp0sel-names-numeric"
 925     run_dump_test "cp0sel-names-mips32"
 926     run_dump_test "cp0sel-names-mips32r2"
 927     run_dump_test "cp0sel-names-mips64"
 928     run_dump_test "cp0sel-names-mips64r2"
 929     run_dump_test "cp0sel-names-sb1"
 930
 931     run_dump_test "hwr-names-numeric"
 932     run_dump_test "hwr-names-mips32r2"
 933     run_dump_test "hwr-names-mips64r2"
 934
 935     run_dump_test "ldstla-32"
 936     run_dump_test "ldstla-32-mips3"
 937     run_dump_test "ldstla-32-shared"
 938     run_dump_test "ldstla-32-mips3-shared"
 939     run_list_test "ldstla-32-1" "-mabi=32" \
 940         "MIPS ld-st-la bad constants (ABI o32)"
 941     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
 942         "MIPS ld-st-la bad constants (ABI o32, mips3)"
 943     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
 944         "MIPS ld-st-la bad constants (ABI o32, shared)"
 945     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
 946         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
 947     run_dump_test "ldstla-eabi64"
 948     if $has_newabi {
 949         run_dump_test "ldstla-n64"
 950         run_dump_test "ldstla-n64-shared"
 951         run_dump_test "ldstla-n64-sym32"
 952     }
 953
 954     run_dump_test "macro-warn-1"
 955     run_dump_test "macro-warn-2"
 956     run_dump_test "macro-warn-3"
 957     run_dump_test "macro-warn-4"
 958     if $has_newabi {
 959         run_dump_test "macro-warn-1-n32"
 960         run_dump_test "macro-warn-2-n32"
 961     }
 962
 963     run_dump_test "noat-1"
 964     run_list_test "noat-2" ""
 965     run_list_test "noat-3" ""
 966     run_list_test "noat-4" ""
 967     run_list_test "noat-5" ""
 968     run_list_test "noat-6" ""
 969     run_list_test "noat-7" ""
 970
 971     run_dump_test "at-1"
 972     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
 973
 974     run_dump_test "loongson-2e"
 975     run_dump_test "loongson-2f"
 976     run_dump_test "loongson-2f-2"
 977     run_dump_test "loongson-2f-3"
 978
 979     run_dump_test "loongson-3a"
 980     run_dump_test "loongson-3a-2"
 981     run_dump_test "loongson-3a-3"
 982
 983     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
 984     run_list_test_arches "octeon-ill" "" \
 985                                         [mips_arch_list_matching octeon]
 986     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
 987
 988     run_dump_test "smartmips"
 989     run_dump_test "mips32-dsp"
 990     run_dump_test "mips32-dspr2"
 991     run_dump_test "mips64-dsp"
 992     run_dump_test "mips32-mt"
 993
 994     if { $elf && !$no_mips16 } {
 995         run_dump_test "mips16-dwarf2"
 996         if $has_newabi {
 997             run_dump_test "mips16-dwarf2-n32"
 998         }
 999     }
1000     if { !$no_mips16 } {
1001         run_dump_test "mips16e-jrc"
1002         run_dump_test "mips16e-save"
1003         run_dump_test "mips16e-64"
1004         run_list_test "mips16e-64" "-march=mips32 -32"
1005         run_dump_test "mips16-intermix"
1006     }
1007     run_dump_test "vxworks1"
1008     run_dump_test "vxworks1-xgot"
1009     run_dump_test "vxworks1-el"
1010     run_dump_test "vxworks1-xgot-el"
1011
1012     run_dump_test "noreorder"
1013     run_dump_test "align"
1014     run_dump_test "align2"
1015     run_dump_test "align2-el"
1016     run_dump_test "odd-float"
1017
1018     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1019                                         [mips_arch_list_matching mips2]
1020     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1021                                         [mips_arch_list_matching mips2]
1022
1023     run_list_test_arches "mips-hard-float-flag" \
1024         "-32 -msoft-float -mhard-float" \
1025                                         [mips_arch_list_matching mips1]
1026     run_list_test_arches "mips-double-float-flag" \
1027         "-32 -msingle-float -mdouble-float" \
1028                                         [mips_arch_list_matching mips1]
1029
1030     run_dump_test "mips16-vis-1"
1031     run_dump_test "call-nonpic-1"
1032     run_dump_test "mips32-sync"
1033     run_dump_test_arches "mips32r2-sync" \
1034                                         [mips_arch_list_matching mips32r2]
1035     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1036     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1037                                         [mips_arch_list_matching mips3] \
1038                                         [mips_arch_list_matching mips32] ] ]
1039     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1040     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1041                                         [mips_arch_list_matching mips4] \
1042                                         [mips_arch_list_matching mips32] ] ]
1043
1044     if $has_newabi { run_dump_test "cfi-n64-1" }
1045
1046     run_dump_test "pr12915"
1047     run_dump_test "reginfo-1a"
1048     run_dump_test "reginfo-1b"
1049
1050     if { !$no_micromips } {
1051         run_dump_test "micromips"
1052         run_dump_test "micromips-trap"
1053         run_list_test "micromips-size-0" \
1054             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1055         run_dump_test "micromips-size-1"
1056         run_dump_test "micromips-branch-relax"
1057         run_dump_test "micromips-branch-relax-pic"
1058         run_dump_test "micromips-branch-delay"
1059     }
1060
1061     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1062                                             !octeon]
1063 }