1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-95, 1996 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Variables that exist for you to override.
30 # See below for how to change them for certain systems.
32 # List of language subdirectories.
33 # This is overridden by configure.
36 # Selection of languages to be made.
37 # This is overridden by configure.
38 LANGUAGES
= c objective-c proto
40 # Selection of languages to be made during stage1 build.
41 # This is overridden by configure.
48 # Various ways of specifying flags for compilations:
49 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
50 # BOOT_CFLAGS is the value of CFLAGS to pass
51 # to the stage2 and stage3 compilations
52 # XCFLAGS is used for most compilations but not when using the GCC just built.
53 # TCFLAGS is used for compilations with the GCC just built.
57 BOOT_CFLAGS
= -O
$(CFLAGS
)
58 # These exists to be overridden by the x-* and t-* files, respectively.
74 # on sysV, define this as cp.
76 # These permit overriding just for certain files.
77 INSTALL_PROGRAM
= $(INSTALL
)
78 INSTALL_DATA
= $(INSTALL
)
82 # For GNUmake: let us decide what gets passed to recursive makes.
85 # Define this as & to perform parallel make on a Sequent.
86 # Note that this has some bugs, and it seems currently necessary
87 # to compile all the gen* files first by hand to avoid erroneous results.
90 # How to invoke ranlib.
92 # Test to use to see whether ranlib exists on the system.
93 RANLIB_TEST
= [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
95 # Compiler to use for compiling libgcc1.a.
96 # OLDCC should not be the GNU C compiler,
97 # since that would compile typical libgcc1.a functions such as mulsi3
98 # into infinite recursions.
101 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
102 # NOTE: -O does not work on some Unix systems!
105 # Version of ar to use when compiling libgcc1.a.
108 # Target to use when installing include directory. Either
109 # install-headers-tar or install-headers-cpio.
110 INSTALL_HEADERS_DIR
= install-headers-tar
112 # Header files that are made available under the same name
113 # to programs compiled with GCC.
114 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
115 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
116 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
117 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
118 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-pa.h \
119 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
120 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
121 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
122 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/va-sh.h
$(EXTRA_HEADERS
) \
123 $(LANG_EXTRA_HEADERS
)
125 # Target to use whe installing assert.h. Some systems may
126 # want to set this empty.
127 INSTALL_ASSERT_H
= install-assert-h
129 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
130 # Usually the one we just built.
131 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
132 GCC_FOR_TARGET
= .
/xgcc
-B.
/
134 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
135 # It omits XCFLAGS, and specifies -B./.
136 # It also specifies -I./include to find, e.g., stddef.h.
137 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
139 # Special flags for compiling enquire.
140 # We disable optimization to make floating point more reliable.
141 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
142 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
144 # Sed command to transform gcc to installed name. Overwritten by configure.
145 program_transform_name
= -e s
,x
,x
,
146 program_transform_cross_name
= -e s
,^
,$(target_alias
)-,
148 # Tools to use when building a cross-compiler.
149 # These are used because `configure' appends `cross-make'
150 # to the makefile when making a cross-compiler.
152 TARGET_TOOLPREFIX
= $(tooldir
)/bin
/
153 AR_FOR_TARGET
= $(TARGET_TOOLPREFIX
)ar
154 AR_FOR_TARGET_FLAGS
= rc
155 RANLIB_FOR_TARGET
= $(TARGET_TOOLPREFIX
)ranlib
156 RANLIB_TEST_FOR_TARGET
= [ -f
$(TARGET_TOOLPREFIX
)ranlib
]
158 # Dir to search for system headers. Overridden by cross-make.
159 SYSTEM_HEADER_DIR
= /usr
/include
161 # Control whether to run fixproto.
162 STMP_FIXPROTO
= stmp-fixproto
164 # Test to see whether <limits.h> exists in the system header files.
165 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
167 # There may be a premade insn-attrtab.c for this machine.
168 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
169 # PREMADE_ATTRTAB is the file name of the file to use.
170 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
171 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
174 target
= ...
`configure' substitutes actual target name here.
175 target_alias= ... `configure
' substitutes specified target name here.
176 xmake_file= ... `configure' substitutes actual x- file name here.
177 tmake_file
= ...
`configure' substitutes actual t- file name here.
178 out_file= ... `configure
' substitutes actual out file name here.
179 out_object_file= ... `configure' substitutes actual out object file name here.
180 md_file
= ...
`configure' substitutes actual md file name here.
181 tm_file= ... `configure
' substitutes actual tm file name here.
182 build_xm_file= ... `configure' substitutes actual build xm- file name here.
183 host_xm_file
= ...
`configure' substitutes actual host xm- file name here.
184 lang_specs_files= ... `configure
' substitutes actual lang spec file names here.
185 lang_options_files= ... `configure' puts actual lang options file names here.
186 OBJC_THREAD_FILE
= ...
`configure' puts actual objc thread file name here.
187 version=`sed
-e
's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c
`
188 mainversion=`sed
-e
's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c
`
190 # Directory where sources are, from where we are.
192 # Common prefix for installation directories.
193 # NOTE: This directory must exist when you start installation.
195 # Directory in which to put localized header files. On the systems with
196 # gcc as the native cc, `local_prefix
' may not be `prefix' which is
198 # NOTE: local_prefix *should not* default from prefix.
199 local_prefix
= /usr
/local
200 # Directory in which to put host dependent programs and libraries
201 exec_prefix = $(prefix)
202 # Directory in which to put the executable for the command `gcc'
203 bindir = $(exec_prefix)/bin
204 # Directory in which to put the directories used by the compiler.
205 libdir = $(exec_prefix)/lib
206 # Directory in which the compiler finds executables, libraries, etc.
207 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
208 # Directory in which the compiler finds g++ includes.
209 gxx_include_dir
= $(prefix)/include/g
++
210 # Directory in which the old g++ header files may be found.
211 old_gxx_include_dir
= $(libdir)/g
++-include
212 # Directory to search for site-specific includes.
213 includedir = $(local_prefix
)/include
214 # assertdir is overridden in cross-make.
215 # (But this currently agrees with what is in cross-make.)
216 assertdir
= $(tooldir
)/include
217 # where the info files go
218 infodir = $(prefix)/info
219 # Extension (if any) to put in installed man-page filename.
224 # Directory in which to put man pages.
225 mandir = $(prefix)/man
/man1
226 # Directory in which to find other cross-compilation tools and headers.
227 # Used in install-cross.
228 tooldir
= $(exec_prefix)/$(target_alias
)
229 # Dir for temp files.
232 # Additional system libraries to link with.
235 # Change this to a null string if obstacks are installed in the
239 # Specify the rule for actually making libgcc.a,
241 # and the rule for installing it.
242 INSTALL_LIBGCC
= install-libgcc
244 # Specify the rule for actually making libgcc1.a.
245 # The value may be empty; that means to do absolutely nothing
246 # with or for libgcc1.a.
249 # Specify the rule for making libgcc1.a for a cross-compiler.
250 # The default rule assumes that libgcc1.a is supplied by the user.
251 CROSS_LIBGCC1
= libgcc1.cross
253 # Specify the rule for actually making libgcc2.a.
256 # Options to use when compiling libgcc2.a.
257 # -g1 causes output of debug info only for file-scope entities.
258 # we use this here because that should be enough, and also
259 # so that -g1 will be tested.
260 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) -g1
-DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED
262 # Additional options to use when compiling libgcc2.a.
263 # Some targets override this to -Iinclude
266 # Additional target-dependent options for compiling libgcc2.a.
267 TARGET_LIBGCC2_CFLAGS
=
269 # Things which must be built before building libgcc2.a.
270 # Some targets override this to stmp-int-hdrs
273 # Enquire target (This is a variable so that a target can choose not to
277 # libgcc1-test target (must also be overridable for a target)
278 LIBGCC1_TEST
= libgcc1-test
280 # List of extra executables that should be compiled for this target machine
281 # that are used for compiling from source code to object code.
282 # The rules for compiling them should be in the t-* file for the machine.
285 # Like EXTRA_PASSES, but these are used when linking.
288 # List of extra object files that should be compiled for this target machine.
289 # The rules for compiling them should be in the t-* file for the machine.
292 # List of extra object files that should be compiled and linked with
293 # compiler proper (cc1, cc1obj, cc1plus).
296 # List of extra object files that should be compiled and linked with
300 # List of additional header files to install.
301 # Often this is edited directly by `configure'.
304 # Set this to `ld' to enable use of collect2.
306 # It is convenient for configure to add the assignment at the beginning,
307 # so don't override it here.
309 # List of extra C and assembler files to add to libgcc1.a.
310 # Assembler files should have names ending in `.asm'.
313 # List of extra C and assembler files to add to libgcc2.a.
314 # Assembler files should have names ending in `.asm'.
317 # Default float.h source to use for cross-compiler.
318 # This is overidden by configure.
319 CROSS_FLOAT_H
=float.h-cross
321 # Program to convert libraries.
324 # Control whether header files are installed.
325 INSTALL_HEADERS
=install-headers
327 # Options for tar when copying trees. So HPUX can override it.
330 # Select which version of fixincludes to use (I.E. regular versus SVR4)
331 # This value is overridden directly by configure.
332 FIXINCLUDES
=fixincludes
334 # Additional directories of header files to run fixincludes on.
335 # These should be directories searched automatically by default
336 # just as /usr/include is.
337 # *Do not* use this for directories that happen to contain
338 # header files, but are not searched automatically by default.
339 # On most systems, this is empty.
340 OTHER_FIXINCLUDES_DIRS
=
342 # List of things which should already be built whenever we try to use xgcc
343 # to compile anything (without linking).
344 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
346 # List of things which should already be built whenever we try to use xgcc
348 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
350 # Directory to link to, when using the target `maketest'.
353 # Guaranteed to not exist when not passing md through cpp.
354 # This value is overridden directly by configure.
355 MD_FILE
= md-cpp-not-used
357 # Flags to use when cross-building GCC.
358 # Prefix to apply to names of object files when using them
359 # to run on the machine we are compiling on.
361 # Prefix to apply to names of object files when compiling them
362 # to run on the machine we are compiling on.
363 # The default for this variable is chosen to keep these rules
364 # out of the way of the other rules for compiling the same source files.
367 HOST_CFLAGS
=$(ALL_CFLAGS
)
369 HOST_LDFLAGS
=$(LDFLAGS
)
370 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
371 HOST_ALLOCA
=$(ALLOCA
)
372 HOST_MALLOC
=$(MALLOC
)
373 HOST_OBSTACK
=$(OBSTACK
)
375 # Actual name to use when installing a native compiler.
376 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed $$t`
378 # Actual name to use when installing a cross-compiler.
379 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed $$t`
381 # Choose the real default target.
384 # Choose the real install target.
385 INSTALL_TARGET
=install-normal
387 # Source for float.h. Overridden by cross-make.
390 # Extra symbols for fixproto to define when parsing headers.
393 # Extra flags to use when compiling crt{begin,end}.o.
396 # Extra flags to use when compiling [m]crt0.o.
399 # End of variables for you to override.
401 # Definition of `all' is here so that new rules inserted by sed
402 # do not specify the default target.
403 # The real definition is under `all.internal' (for native compilers)
404 # or `all.cross' (for cross compilers).
407 # This tells GNU Make version 3 not to put all variables in the environment.
410 # sed inserts variable overrides after the following line.
416 # Now figure out from those variables how to compile and link.
420 # IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
421 # ??? IN_GCC should be obsolete now.
422 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC
424 # This is the variable actually used when we compile.
425 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
)
428 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
430 # Even if ALLOCA is set, don't use it if compiling with GCC.
431 USE_ALLOCA
= ` case "${CC}" in "${OLDCC}") echo "${ALLOCA}" ;; esac `
432 USE_HOST_ALLOCA
= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
433 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
434 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
436 # Dependency on obstack, alloca, malloc or whatever library facilities
437 # are not installed in the system libraries.
438 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
439 LIBDEPS
= $(OBSTACK
) $(ALLOCA
) $(MALLOC
)
441 # Likewise, for use in the tools that must run on this machine
442 # even if we are cross-building GCC.
443 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
444 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
)
446 # How to link with both our special library facilities
447 # and the system's installed libraries.
448 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(CLIB
)
450 # Likewise, for use in the tools that must run on this machine
451 # even if we are cross-building GCC.
452 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
455 HOST_RTL
= $(HOST_PREFIX
)rtl.o
456 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
457 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
459 # Specify the directories to be searched for header files.
460 # Both . and srcdir are used, in that order,
461 # so that tm.h and config.h will be found in the compilation
462 # subdirectory rather than in the source directory.
463 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
465 # Always use -I$(srcdir)/config when compiling.
467 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
469 # This tells GNU make version 3 not to export all the variables
470 # defined in this file into the environment.
473 # Support for additional languages (other than c and objc).
474 # ??? objc can be supported this way too (leave for later).
476 # These next lines are overridden by configure.
483 # Flags to pass to recursive makes.
484 # CC is set by configure. Hosts without symlinks need special handling
485 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
487 # ??? The choices here will need some experimenting with.
489 "AR_FLAGS=$(AR_FLAGS)" \
490 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
492 "BISONFLAGS=$(BISONFLAGS)" \
493 "CC=set-by-configure" \
496 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
497 "LDFLAGS=$(LDFLAGS)" \
499 "LEXFLAGS=$(LEXFLAGS)" \
500 "MAKEINFO=$(MAKEINFO)" \
501 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
502 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
503 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
507 "exec_prefix=$(exec_prefix)" \
509 "tooldir=$(tooldir)" \
511 "libsubdir=$(libsubdir)"
513 # Lists of files for various purposes.
515 # A list of all the language-specific executables.
516 # This is overridden by configure.
517 COMPILERS
= cc1
$(exeext
) cc1obj
$(exeext
)
519 # Language-specific object files for C.
520 C_OBJS
= c-parse.o c-lang.o c-lex.o c-pragma.o \
521 c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
523 # Language-specific object files for Objective C.
524 OBJC_OBJS
= objc-parse.o objc-act.o c-lex.o c-pragma.o \
525 c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
527 # Files specific to the C interpreter bytecode compiler(s).
528 BC_OBJS
= bc-emit.o bc-optab.o
530 # Bytecode header files constructed at build time; vmsconfig.com wants this.
531 BC_ALL
= bc-arity.h bc-opcode.h bc-opname.h
533 # Language-independent object files.
534 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
535 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
536 varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
537 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o \
538 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
539 regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
540 insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \
541 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
542 insn-attrtab.o
$(out_object_file
) getpwd.o convert.o
$(EXTRA_OBJS
)
544 # GEN files are listed separately, so they can be built before doing parallel
545 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
546 # them before rtl.o is compiled.
547 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep
550 # Uncomment this line if you want to use cppmain (w/cpplib) as cpp.
553 # Files to be copied away after each stage in building.
554 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
555 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
556 insn-attr.h insn-attrtab.c insn-opinit.c \
557 stamp-flags stamp-config stamp-codes stamp-mlib \
558 stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
559 stamp-attr stamp-attrtab stamp-opinit stamp-proto stamp-crt stamp-crtS stamp-crt0 \
560 genemit
$(exeext
) genoutput
$(exeext
) genrecog
$(exeext
) genextract
$(exeext
) \
561 genflags
$(exeext
) gencodes
$(exeext
) genconfig
$(exeext
) genpeep
$(exeext
) \
562 genattrtab
$(exeext
) genattr
$(exeext
) genopinit
$(exeext
) \
564 stamp-bcarity stamp-bcopcode stamp-bcopname \
565 bi-arity
$(exeext
) bi-opcode
$(exeext
) bi-opname
$(exeext
) \
566 $(GCC_PASSES
) $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
567 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
568 protoize
$(exeext
) unprotoize
$(exeext
) \
569 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
570 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
571 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack \
575 # Members of libgcc1.a.
576 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
577 _lshrsi3 _ashrsi3 _ashlsi3 \
578 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
579 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
580 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
581 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
582 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
584 # Library members defined in libgcc2.c.
585 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
586 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
587 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
588 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
589 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
590 _fixtfdi _fixunstfdi _floatditf \
591 __gcc_bcmp _varargs __dummy _eprintf _op_new _op_vnew _new_handler \
592 _op_delete _op_vdel _bb _shtab _clear_cache _trampoline __main _exit \
595 # The files that "belong" in CONFIG_H are deliberately omitted
596 # because having them there would not be useful in actual practice.
597 # All they would do is cause complete recompilation every time
598 # one of the machine description files is edited.
599 # That may or may not be what one wants to do.
600 # If it is, rm *.o is an easy way to do it.
601 # CONFIG_H = $(host_xm_file) $(tm_file)
603 RTL_H
= rtl.h rtl.def machmode.h machmode.def
604 TREE_H
= tree.h real.h tree.def machmode.h machmode.def
605 BYTECODE_H
= bytecode.h bc-emit.h bc-optab.h
607 # Language makefile fragments.
609 # The following targets define the interface between us and the languages.
611 # all.build, all.cross, start.encap, rest.encap,
613 # install-normal, install-common, install-info, install-man,
614 # uninstall, distdir,
615 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
616 # stage1, stage2, stage3, stage4
618 # Each language is linked in with a series of hooks (since we can't use `::'
619 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
620 # Configure computes and adds these here.
624 # sed inserts language fragments after the following line.
625 ####language fragments
627 # End of language makefile fragments.
629 # Avoid a lot of time thinking about remaking Makefile.in and *.def.
632 Makefile
: $(srcdir)/Makefile.in
$(srcdir)/configure
$(srcdir)/version.c \
633 $(xmake_file
) $(tmake_file
) \
635 cp config.status config.run
639 all.internal
: start.encap rest.encap
640 # This is what to compile if making a cross-compiler.
641 # Note that we can compile enquire using the cross-compiler just built,
642 # although we can't run it on this machine.
643 all.cross
: native gcc-cross specs stmp-headers
$(LIBGCC
) $(STMP_FIXPROTO
) \
644 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross
645 # This is what to compile if making gcc with a cross-compiler.
646 all.build
: native xgcc
$(EXTRA_PARTS
) lang.
all.build
647 # This is what must be made before installing GCC and converting libraries.
648 start.encap
: native xgcc specs
$(LIBGCC1
) xlimits.h lang.start.encap
649 # These can't be made until after GCC can run.
650 rest.encap
: stmp-headers
$(LIBGCC
) $(STMP_FIXPROTO
) $(EXTRA_PARTS
) lang.rest.encap
651 # This is what is made with the host's compiler
652 # whether making a cross compiler or not.
653 native
: config.status
cpp $(LANGUAGES
) $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
655 # Define the names for selecting languages in LANGUAGES.
657 OBJC objc
: cc1obj objc-runtime
658 OBJECTIVE-C objective-c
: cc1obj objc-runtime
661 # Tell GNU make these are phony targets.
662 .PHONY
: C c OBJC objc OBJECTIVE-C objective-c PROTO proto
664 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
665 # a target to build even if it is up-to-date. So we must verify that
666 # config.status does not exist before failing.
668 @if
[ ! -f config.status
] ; then \
669 echo You must configure gcc. Look at the INSTALL file for details.
; \
675 # On the target machine, finish building a cross compiler.
676 # This does the things that can't be done on the host machine.
677 rest.cross
: $(LIBGCC
) gfloat.h specs
679 # Verify that it works to compile and link libgcc1-test.
680 # If it does, then there are sufficient replacements for libgcc1.a.
681 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
682 @echo
"Testing libgcc1. Ignore linker warning messages."
683 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
684 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
685 libgcc1-test.o
: libgcc1-test.c native xgcc
686 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
688 # Recompile all the language-independent object files.
689 # This is used only if the user explicitly asks for it.
690 compilations
: ${OBJS}
692 # Create a list of the language-independent object files so the language
693 # subdirectories needn't mention their names explicitly.
694 stamp-objlist
: $(OBJS
) $(BC_OBJS
)
695 echo
" $(OBJS) $(BC_OBJS)" | sed
-e
's, \([a-z]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
697 # We call this executable `xgcc' rather than `gcc'
698 # to avoid confusion if the current directory is in the path
699 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
700 xgcc
: gcc.o version.o choose-temp.o pexecute.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
701 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o version.o \
702 choose-temp.o pexecute.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
704 # Dump a specs file to make -B./ read these specs over installed ones.
706 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
709 # We do want to create an executable named `xgcc', so we can use it to
711 # Also create gcc-cross, so that install-common will install properly.
713 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
715 cc1
: $(P
) $(C_OBJS
) $(OBJS
) $(BC_OBJS
) $(LIBDEPS
)
716 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(C_OBJS
) $(OBJS
) $(BC_OBJS
) $(LIBS
)
718 cc1obj
: $(P
) $(OBJC_OBJS
) $(OBJS
) $(BC_OBJS
) $(LIBDEPS
)
719 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJC_OBJS
) $(OBJS
) $(BC_OBJS
) $(LIBS
)
721 # Copy float.h from its source.
724 cp
$(FLOAT_H
) gfloat.h
726 # Create float.h source for the native machine.
728 -.
/enquire
-f
> tmp-float.h
729 mv tmp-float.h float.h-nat
731 # Create a dummy float.h source for a cross-compiler.
732 # ??? This isn't used anymore. Should we create config/float-unkn.h
733 # and make that the default float_format in configure?
735 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
736 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
737 echo
"#endif" >> t-float.h-cross
738 mv t-float.h-cross float.h-cross
740 # Used to compile enquire with standard cc, but have forgotten why.
741 # Let's try with GCC.
742 enquire
: enquire.o
$(GCC_PARTS
)
743 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
744 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
745 # Breaking this line caused a problem with one version of GNU make.
746 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) -I.
-c
$(srcdir)/enquire.c
748 # Build the version of limits.h that we will install.
749 xlimits.h
: glimits.h limitx.h limity.h
750 if
$(LIMITS_H_TEST
) ; then \
751 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
753 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
755 mv tmp-xlimits.h xlimits.h
758 # This is done in two parts because some functions, in libgcc1.c,
759 # must be compiled with something other than GCC,
760 # while the rest, in libgcc2.c, must be compiled with xgcc.
761 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
763 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
764 # LIBCONVERT should put its output in libgcc1.conv.
765 libgcc1.conv
: libgcc1.a
766 $(LIBCONVERT
) libgcc1.a libgcc1.conv
768 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
769 # Make an empty file instead.
770 libgcc1.null
: $(GCC_PASSES
)
771 echo
"__foo () {}" > dummy.c
772 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
773 $(OLDAR
) $(OLDAR_FLAGS
) libgcc1.null dummy
$(objext
)
774 rm -f dummy
$(objext
) dummy.c
776 # This is $(LIBGCC1) for a cross-compiler.
777 # We have no automatic way of building libgcc1.a,
778 # so it's up to the installer to find a way to do that.
779 # This rule deliberately does not depend on libgcc1.a
780 # so that it will fail if the installer hasn't provided it.
782 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
784 # Compile the library of arithmetic subroutines with the native compiler.
785 # Don't compile it with GCC!
786 # (That would cause most arithmetic functions to call themselves.)
788 # NOTE: If you modify these rules substantially, please be sure to
789 # check at least config/i386/t-sco5 and possibly other makefile
791 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
793 # Actually build it in tmplibgcc1.a, then rename at end,
794 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
795 # -e causes any failing command to make this rule fail.
796 # -e doesn't work in certain shells, so we test $$? as well.
797 # lynx has a broken ar, it always complains when the initial library is
798 # empty, thus this command works only if we don't do -e
799 # There is a trailing backslash (\) deleted from the following line.
801 for name in
$(LIB1FUNCS
); \
804 rm -f
$${name}$(objext
); \
805 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
806 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
807 mv libgcc1
$(objext
) $${name}$(objext
); \
808 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
809 rm -f
$${name}$(objext
); \
811 # Some shells crash when a loop has no items.
812 # So make sure there is always at least one--`..'.
814 # We don't use -e here because there are if statements
815 # that should not make the command give up when the if condition is false.
816 # Instead, we test for failure after each command where it matters.
817 for file in ..
$(LIB1FUNCS_EXTRA
); \
819 if
[ x
$${file} != x..
]; then \
820 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
822 if
[ $${name}.asm
= $${file} ]; then \
823 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
825 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
826 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
827 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
828 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
829 rm -f
$${name}.s
$${name}$(objext
); \
833 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc1.a
; else true
; fi
834 mv tmplibgcc1.a libgcc1.a
836 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
837 # functions. LIB1ASMSRC is the name of the source file in the config
839 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
840 -rm -f tmplibgcc1.a libgcc1.S
841 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
842 # Actually build it in tmplibgcc1.a, then rename at end,
843 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
844 # -e causes any failing command to make this rule fail.
845 # -e doesn't work in certain shells, so we test $$? as well.
846 # lynx has a broken ar, it always complains when the initial library is
847 # empty, thus this command works only if we don't do -e
848 # There is a trailing backslash (\) deleted from the following line.
850 for name in
$(LIB1ASMFUNCS
); \
853 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
854 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
855 mv libgcc1
$(objext
) $${name}$(objext
); \
856 $(AR
) $(AR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
857 rm -f
$${name}$(objext
); \
860 mv tmplibgcc1.a libgcc1-asm.a
862 # Generate assembly versions of the functions required for libgcc1.
863 # You'll still need to massage the code by hand (possibly hacking
864 # underscores and local labels) but this will get you started.
865 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
868 for name in
$(LIB1FUNCS
); \
871 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
872 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
873 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
874 cat libgcc1.s
>> libgcc1.S
; \
875 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
876 echo
"" >> libgcc1.S
; \
879 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
880 # But recompiling cc1 should not force recompilation of libgcc2.a.
881 # If you want to force recompilation, delete libgcc2.a.
882 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
883 -if
[ -f libgcc2.ready
] ; then \
886 touch libgcc2.ready
; \
889 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(LIB2FUNCS_EXTRA
) \
890 $(LANG_LIB2FUNCS
) machmode.h longlong.h gbl-ctors.h config.status
891 # Actually build it in tmplibgcc2.a, then rename at end,
892 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
894 # -e causes any failing command to make this rule fail.
895 # -e doesn't work in certain shells, so we test $$? as well.
896 # lynx has a broken ar, it always complains when the initial library is
897 # empty, thus this command works only if we don't do -e
898 # There is a trailing backslash (\) deleted from the following line.
900 for name in
$(LIB2FUNCS
); \
903 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
904 $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
905 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
906 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${name}$(objext
); \
907 rm -f
$${name}$(objext
); \
909 # Some shells crash when a loop has no items.
910 # So make sure there is always at least one--`..'.
912 # We don't use -e here because there are if statements
913 # that should not make the command give up when the if condition is false.
914 # Instead, we test for failure after each command where it matters.
915 for file in ..
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
); \
917 if
[ x
$${file} != x..
]; then \
918 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
919 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
920 if
[ $${name}.txt
= $${file} ]; then \
921 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
922 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
923 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" \
924 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
925 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
926 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
927 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
928 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${f}; \
933 if
[ $${name}.asm
= $${file} ]; then \
934 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
936 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
937 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
938 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${oname}$(objext
); \
939 rm -f
$${name}.s
$${oname}$(objext
); \
944 mv tmplibgcc2.a libgcc2.a
945 # These lines were deleted from above the mv command
946 # because ranlibing libgcc.a itself should suffice.
947 # -if [ x${HPUX_GAS} = x ] ; then \
948 # if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi; \
951 # Combine the various libraries into a single library, libgcc.a.
952 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
953 -rm -rf tmplibgcc.a libgcc.a tmpcopy
955 -if
[ x
$(LIBGCC1
) != x
]; \
956 then
(cd tmpcopy
; $(AR
) x ..
/$(LIBGCC1
)); \
959 # Some versions of ar (specifically the one in RISC/os 5.x), create an
960 # unwritable table of contents file, and then print an error message when
961 # the second ar command tries to overwrite this file. To avoid the error
962 # message from ar, we make sure all files are writable.
963 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
964 (cd tmpcopy
; $(AR
) x ..
/$(LIBGCC2
))
965 (cd tmpcopy
; $(AR
) $(AR_FLAGS
) ..
/tmplibgcc.a
*$(objext
))
967 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc.a
; else true
; fi
968 # Actually build it in tmplibgcc.a, then rename at end,
969 # so that libgcc.a itself remains nonexistent if compilation is aborted.
970 mv tmplibgcc.a libgcc.a
972 # Use the genmultilib shell script to generate the information the gcc
973 # driver program needs to select the library directory based on the
975 multilib.h
: stamp-mlib
; @true
976 stamp-mlib
: $(srcdir)/genmultilib Makefile
977 $(SHELL
) $(srcdir)/genmultilib \
978 "$(MULTILIB_OPTIONS)" \
979 "$(MULTILIB_DIRNAMES)" \
980 "$(MULTILIB_MATCHES)" \
981 "$(MULTILIB_EXCEPTIONS)" \
982 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
983 $(srcdir)/move-if-change tmp-mlib.h multilib.h
986 # Build multiple copies of libgcc.a, one for each target switch.
987 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
988 $(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
) machmode.h longlong.h gbl-ctors.h \
990 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
991 dir=`echo $$i | sed -e 's/;.*$$//'`; \
992 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
993 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
994 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
995 RANLIB
="$(RANLIB)" RANLIB_TEST
="$(RANLIB_TEST)" \
996 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
997 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
998 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
999 dir="$${dir}" stmp-multilib-sub
; \
1000 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1004 # Subroutine of stmp-multilib so make -n works.
1006 rm -f
$(dir)/libgcc.a
$(LIBGCC2
)
1007 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1008 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1009 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1010 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1011 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1013 else rm -f
$(LIBGCC1
); \
1015 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1018 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1019 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1020 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1021 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1023 rm -rf tmplibgcc.a tmpcopy
1025 if
[ x
$(LIBGCC1
) != x
]; \
1026 then
(cd tmpcopy
; $(AR
) x ..
/$(LIBGCC1
)); \
1029 (cd tmpcopy
; $(AR
) x ..
/$(LIBGCC2
))
1030 (cd tmpcopy
; $(AR
) $(AR_FLAGS
) ..
/tmplibgcc.a
*$(objext
))
1031 rm -rf libgcc2.a tmpcopy
1032 if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc.a
; else true
; fi
1033 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1034 mv tmplibgcc.a
$(dir)/libgcc.a
1036 objc-runtime
: libobjc.a
1038 # Build the Objective C runtime library.
1039 libobjc.a
: cc1obj specs stmp-int-hdrs libgcc2.ready
$(USE_COLLECT2
) $(EXTRA_PARTS
)
1040 if
[ -d objc
]; then true
; else mkdir objc
; fi
1042 srcdir1
=`cd $(srcdir); pwd`; \
1044 $(MAKE
) -f
$${srcdir1}/objc
/Makefile libobjc.a \
1045 srcdir=$${srcdir1} tooldir
=$(tooldir
) AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" \
1046 GCC_FOR_TARGET
="$${thisdir1}/xgcc -B$${thisdir1}/" \
1047 GCC_CFLAGS
="$(GCC_CFLAGS)" OBJC_THREAD_FILE
="$(OBJC_THREAD_FILE)"
1049 ln objc
/libobjc.a .
>/dev
/null
2>&1 || cp objc
/libobjc.a .
1050 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) libobjc.a
; else true
; fi
1052 # This is used by objc/Makefile if the user runs that directly.
1053 sublibobjc.a
: cc1obj specs stmp-int-hdrs libgcc2.ready
1055 srcdir1
=`cd $(srcdir); pwd`; \
1057 $(MAKE
) -f
$$srcdir1/objc
/Makefile libobjc.a \
1058 srcdir=$$srcdir1 tooldir
=$(tooldir
) AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" \
1059 GCC_FOR_TARGET
="$$thisdir1/xgcc -B$$thisdir1/" \
1060 GCC_CFLAGS
="$(GCC_CFLAGS)" OBJC_THREAD_FILE
="$(OBJC_THREAD_FILE)"
1062 # Compile two additional files that are linked with every program
1063 # linked using GCC on systems using COFF or ELF, for the sake of C++
1065 crtbegin.o
: stamp-crt
; @true
1066 crtend.o
: stamp-crt
; @true
1068 stamp-crt
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) gbl-ctors.h
1069 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS
) \
1070 -DCRT_BEGIN
-finhibit-size-directive
-fno-inline-functions \
1071 -g0
-c
$(srcdir)/crtstuff.c
1072 mv crtstuff
$(objext
) crtbegin
$(objext
)
1073 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS
) \
1074 -DCRT_END
-finhibit-size-directive
-fno-inline-functions \
1075 -g0
-c
$(srcdir)/crtstuff.c
-o crtend
$(objext
)
1078 # On some systems we also want to install versions of these files
1079 # compiled using PIC for use in shared libraries.
1080 crtbeginS.o crtendS.o
: stamp-crtS
; @true
1082 stamp-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) gbl-ctors.h
1083 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1084 -DCRT_BEGIN
-finhibit-size-directive
-fno-inline-functions \
1085 -g0
-c
$(srcdir)/crtstuff.c
1086 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1087 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1088 -DCRT_END
-finhibit-size-directive
-fno-inline-functions \
1089 -g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1092 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1093 crt0.o
: stamp-crt0
; @true
1094 mcrt0.o
: stamp-crt0
; @true
1096 stamp-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1097 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1098 -o crt0.o
-c
$(CRT0_S
)
1099 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1100 -o mcrt0.o
-c
$(MCRT0_S
)
1103 # Compiling object files from source files.
1105 # Note that dependencies on obstack.h are not written
1106 # because that file is not part of GCC.
1108 # C language specific files.
1110 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1111 $(srcdir)/c-parse.h c-tree.h input.h flags.h
1112 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1113 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1114 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1115 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d c-parse.y
-o c-parse.c
1116 $(srcdir)/c-parse.y
: c-parse.in
1117 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1118 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1119 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1120 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1121 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1123 $(srcdir)/c-gperf.h
: c-parse.gperf
1124 gperf
-p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word
-k1
,3,$$ \
1125 $(srcdir)/c-parse.gperf
>tmp-gperf.h
1126 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1128 c-decl.o
: c-decl.c
$(CONFIG_H
) $(TREE_H
) c-tree.h c-lex.h flags.h output.h
1129 c-typeck.o
: c-typeck.c
$(CONFIG_H
) $(TREE_H
) c-tree.h flags.h output.h
1130 c-lang.o
: c-lang.c
$(CONFIG_H
) $(TREE_H
)
1131 c-lex.o
: c-lex.c
$(CONFIG_H
) $(TREE_H
) c-lex.h c-tree.h
$(srcdir)/c-parse.h \
1132 input.h flags.h
$(srcdir)/c-gperf.h c-pragma.h
1133 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) $(TREE_H
) c-tree.h flags.h
1134 c-convert.o
: c-convert.c
$(CONFIG_H
) $(TREE_H
) flags.h
1135 c-pragma.o
: c-pragma.c
$(CONFIG_H
) $(TREE_H
) except.h function.h \
1136 defaults.h c-pragma.h
1137 c-iterate.o
: c-iterate.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) c-tree.h flags.h
1139 # To make a configuration always use collect2, set USE_COLLECT2 to ld.
1142 ln collect2
$(exeext
) ld$(exeext
) > /dev
/null
2>&1 \
1143 || cp collect2
$(exeext
) ld$(exeext
)
1145 collect2
: collect2.o cplus-dem.o underscore.o version.o \
1146 choose-temp.o
$(LIBDEPS
)
1147 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1148 -rm -f collect2
$(exeext
)
1149 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ collect2.o \
1150 cplus-dem.o underscore.o version.o choose-temp.o
$(LIBS
)
1152 collect2.o
: collect2.c
$(CONFIG_H
) gstab.h obstack.h demangle.h
1153 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1154 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1155 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1157 cplus-dem.o
: cplus-dem.c demangle.h
1159 underscore.c
: stamp-under
; @true
1161 stamp-under
: $(GCC_PASSES
)
1162 echo
"int xxy_us_dummy;" >tmp-dum.c
1163 $(GCC_FOR_TARGET
) -S tmp-dum.c
1164 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1165 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1166 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1168 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1170 $(srcdir)/move-if-change tmp-under.c underscore.c
1171 -rm -f tmp-dum.c tmp-dum.s
1174 # Objective C language specific files.
1176 objc-parse.o
: $(srcdir)/objc-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1177 c-tree.h input.h flags.h objc-act.h
1178 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/objc-parse.c
1179 $(srcdir)/objc-parse.c
: $(srcdir)/objc-parse.y
1180 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) objc-parse.y
-o objc-parse.c
1181 $(srcdir)/objc-parse.y
: $(srcdir)/c-parse.in
1182 echo
'/*WARNING: This file is automatically generated!*/' >tmp-objc-prs.y
1183 sed
-e
"/^ifc$$/,/^end ifc$$/d" \
1184 -e
"/^ifobjc$$/d" -e
"/^end ifobjc$$/d" \
1185 $(srcdir)/c-parse.in
>>tmp-objc-prs.y
1186 $(srcdir)/move-if-change tmp-objc-prs.y
$(srcdir)/objc-parse.y
1188 objc-act.o
: objc-act.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) c-tree.h c-lex.h \
1189 flags.h objc-act.h input.h function.h
$(srcdir)/c-parse.h
1191 # A file used by all variants of C.
1193 c-common.o
: c-common.c
$(CONFIG_H
) $(TREE_H
) c-tree.h c-lex.h flags.h
1195 # Language-independent files.
1197 gcc.o
: gcc.c
$(CONFIG_H
) multilib.h config.status
$(lang_specs_files
)
1198 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1199 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1200 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1201 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1202 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1203 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\" \
1204 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1206 dumpvers
: dumpvers.c
1208 version.o
: version.c
1209 obstack.o
: obstack.c
1210 choose-temp.o
: choose-temp.c
1211 pexecute.o
: pexecute.c
1213 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h
1215 tree.o
: tree.c
$(CONFIG_H
) $(TREE_H
) flags.h function.h
1216 print-tree.o
: print-tree.c
$(CONFIG_H
) $(TREE_H
)
1217 stor-layout.o
: stor-layout.c
$(CONFIG_H
) $(TREE_H
) flags.h function.h
1218 fold-const.o
: fold-const.c
$(CONFIG_H
) $(TREE_H
) flags.h
1219 toplev.o
: toplev.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) bytecode.h bc-emit.h \
1220 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1221 $(lang_options_files
)
1222 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1223 -DTARGET_NAME
=\"$(target_alias
)\" \
1224 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1226 rtl.o
: rtl.c
$(CONFIG_H
) $(RTL_H
)
1228 print-rtl.o
: print-rtl.c
$(CONFIG_H
) $(RTL_H
)
1229 rtlanal.o
: rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1231 varasm.o
: varasm.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) flags.h function.h \
1232 defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h \
1233 output.h bytecode.h c-pragma.h
1234 function.o
: function.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h function.h \
1235 insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
1236 recog.h output.h bytecode.h bc-emit.h
1237 stmt.o
: stmt.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h function.h \
1238 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h except.h \
1239 loop.h recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h \
1240 bc-optab.h bc-emit.h
1241 except.o
: except.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h function.h \
1242 insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
1243 recog.h output.h except.h
1244 expr.o
: expr.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h function.h regs.h \
1245 insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
1246 typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
1247 bc-emit.h modemap.def hard-reg-set.h
1248 calls.o
: calls.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h expr.h insn-codes.h \
1250 expmed.o
: expmed.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1251 insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h
1252 explow.o
: explow.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h hard-reg-set.h \
1253 insn-config.h expr.h recog.h insn-flags.h insn-codes.h
1254 optabs.o
: optabs.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1255 insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
1256 dbxout.o
: dbxout.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) flags.h regs.h \
1257 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
1258 sdbout.o
: sdbout.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) gsyms.h flags.h \
1259 insn-config.h reload.h
1260 dwarfout.o
: dwarfout.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) dwarf.h flags.h \
1261 insn-config.h reload.h output.h defaults.h
1262 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) dwarf2.h flags.h \
1263 insn-config.h reload.h output.h defaults.h hard-reg-set.h regs.h
1264 xcoffout.o
: xcoffout.c
$(CONFIG_H
) $(TREE_H
) $(RTL_H
) xcoffout.h flags.h
1265 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1266 function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
1267 bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h bc-emit.h bc-opname.h
1268 real.o
: real.c
$(CONFIG_H
) $(TREE_H
)
1269 getpwd.o
: getpwd.c
$(CONFIG_H
)
1271 integrate.o
: integrate.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h integrate.h \
1272 insn-flags.h insn-config.h insn-codes.h expr.h real.h regs.h function.h \
1275 jump.o
: jump.c
$(CONFIG_H
) $(RTL_H
) flags.h hard-reg-set.h regs.h \
1276 insn-config.h insn-flags.h insn-codes.h expr.h real.h
1277 stupid.o
: stupid.c
$(CONFIG_H
) $(RTL_H
) regs.h hard-reg-set.h flags.h
1279 cse.o
: cse.c
$(CONFIG_H
) $(RTL_H
) regs.h hard-reg-set.h flags.h real.h \
1280 insn-config.h recog.h
1281 loop.o
: loop.c
$(CONFIG_H
) $(RTL_H
) flags.h loop.h insn-config.h \
1282 insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h
1283 unroll.o
: unroll.c
$(CONFIG_H
) $(RTL_H
) insn-config.h insn-codes.h \
1284 integrate.h regs.h flags.h expr.h loop.h
1285 flow.o
: flow.c
$(CONFIG_H
) $(RTL_H
) flags.h insn-config.h \
1286 basic-block.h regs.h hard-reg-set.h output.h
1287 combine.o
: combine.c
$(CONFIG_H
) $(RTL_H
) flags.h \
1288 insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \
1289 basic-block.h recog.h real.h hard-reg-set.h
1290 regclass.o
: regclass.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h flags.h \
1291 basic-block.h regs.h insn-config.h recog.h reload.h real.h bytecode.h
1292 local-alloc.o
: local-alloc.c
$(CONFIG_H
) $(RTL_H
) flags.h basic-block.h \
1293 regs.h hard-reg-set.h insn-config.h recog.h output.h
1294 global.o
: global.c
$(CONFIG_H
) $(RTL_H
) flags.h \
1295 basic-block.h regs.h hard-reg-set.h insn-config.h output.h
1297 reload.o
: reload.c
$(CONFIG_H
) $(RTL_H
) flags.h output.h \
1298 reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
1299 reload1.o
: reload1.c
$(CONFIG_H
) $(RTL_H
) real.h flags.h expr.h \
1300 reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1301 basic-block.h recog.h output.h
1302 caller-save.o
: caller-save.c
$(CONFIG_H
) $(RTL_H
) flags.h \
1303 regs.h hard-reg-set.h insn-codes.h insn-config.h basic-block.h recog.h \
1305 reorg.o
: reorg.c
$(CONFIG_H
) $(RTL_H
) conditions.h hard-reg-set.h \
1306 basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
1308 sched.o
: sched.c
$(CONFIG_H
) $(RTL_H
) basic-block.h regs.h hard-reg-set.h \
1309 flags.h insn-config.h insn-attr.h
1310 final.o
: final.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h regs.h \
1311 recog.h conditions.h insn-config.h insn-attr.h except.h real.h output.h \
1312 hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
1313 recog.o
: recog.c
$(CONFIG_H
) $(RTL_H
) \
1314 regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
1315 insn-flags.h insn-codes.h real.h
1316 reg-stack.o
: reg-stack.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) \
1317 regs.h hard-reg-set.h flags.h insn-config.h insn-flags.h
1319 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1320 $(RTL_H
) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
1321 insn-flags.h output.h insn-attr.h insn-codes.h
1322 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1324 # Build auxiliary files that support ecoff format.
1325 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1326 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1328 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
)
1330 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1331 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1333 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
)
1335 # Build file to support OSF/rose half-pic format.
1336 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
)
1338 # Normally this target is not used; but it is used if you
1339 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1340 # from the GNU Emacs distribution.
1342 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1343 -c
`echo $(srcdir)/alloca.c | sed 's,^\./,,'`
1346 # Generate header and source files from the machine description,
1349 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1350 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1351 insn-attr.h insn-attrtab.c
1353 # The following pair of rules has this effect:
1354 # genconfig is run only if the md has changed since genconfig was last run;
1355 # but the file insn-config.h is touched only when its contents actually change.
1357 # Each of the other insn-* files is handled by a similar pair of rules.
1359 # This causes an anomaly in the results of make -n
1360 # because insn-* is older than stamp-*
1361 # and thus make -n thinks that insn-* will be updated
1362 # and force recompilation of things that depend on it.
1363 # We use move-if-change precisely to avoid such recompilation.
1364 # But there is no way to teach make -n that it will be avoided.
1366 # Each of the insn-*.[ch] rules has a semicolon at the end,
1367 # for otherwise the system Make on SunOS 4.1 never tries
1368 # to recompile insn-*.o. To avoid problems and extra noise from
1369 # versions of make which don't like empty commands (nothing after the
1370 # trailing `;'), we call true for each.
1372 insn-config.h
: stamp-config
; @true
1373 stamp-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1374 .
/genconfig
$(md_file
) > tmp-config.h
1375 $(srcdir)/move-if-change tmp-config.h insn-config.h
1378 insn-flags.h
: stamp-flags
; @true
1379 stamp-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1380 .
/genflags
$(md_file
) > tmp-flags.h
1381 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1384 insn-codes.h
: stamp-codes
; @true
1385 stamp-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1386 .
/gencodes
$(md_file
) > tmp-codes.h
1387 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1390 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) expr.h real.h output.h \
1391 insn-config.h insn-flags.h insn-codes.h
1392 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1394 insn-emit.c
: stamp-emit
; @true
1395 stamp-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1396 .
/genemit
$(md_file
) > tmp-emit.c
1397 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1400 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h recog.h \
1401 real.h output.h flags.h
1402 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1404 insn-recog.c
: stamp-recog
; @true
1405 stamp-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1406 .
/genrecog
$(md_file
) > tmp-recog.c
1407 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1410 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1411 insn-config.h flags.h rtl.h recog.h expr.h reload.h
1412 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1414 insn-opinit.c
: stamp-opinit
; @true
1415 stamp-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1416 .
/genopinit
$(md_file
) > tmp-opinit.c
1417 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1420 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
)
1421 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1423 insn-extract.c
: stamp-extract
; @true
1424 stamp-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1425 .
/genextract
$(md_file
) > tmp-extract.c
1426 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1429 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) regs.h output.h real.h
1430 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1432 insn-peep.c
: stamp-peep
; @true
1433 stamp-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1434 .
/genpeep
$(md_file
) > tmp-peep.c
1435 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1438 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) regs.h real.h output.h \
1439 insn-attr.h insn-config.h
1440 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1442 insn-attr.h
: stamp-attr
; @true
1443 stamp-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1444 .
/genattr
$(md_file
) > tmp-attr.h
1445 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1448 insn-attrtab.c
: stamp-attrtab
; @true
1449 stamp-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1450 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1452 echo Using
$(PREMADE_ATTRTAB
); \
1453 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1455 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1457 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1460 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) regs.h real.h conditions.h \
1461 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \
1463 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1465 insn-output.c
: stamp-output
; @true
1466 stamp-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1467 .
/genoutput
$(md_file
) > tmp-output.c
1468 $(srcdir)/move-if-change tmp-output.c insn-output.c
1471 # Compile the programs that generate insn-* from the machine description.
1472 # They are compiled with $(HOST_CC), and associated libraries,
1473 # since they need to run on this machine
1474 # even if GCC is being compiled to run on some other machine.
1476 # $(CONFIG_H) is omitted from the deps of the gen*.o
1477 # because these programs don't really depend on anything
1478 # about the target machine. They do depend on config.h itself,
1479 # since that describes the host machine.
1481 # Pass the md file through cpp if the target requests it.
1482 $(MD_FILE
): $(MD_DEPS
)
1484 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1487 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1488 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1489 genconfig.o
$(HOST_RTL
) $(HOST_LIBS
)
1491 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
)
1492 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1494 genflags
: genflags.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1495 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1496 genflags.o
$(HOST_RTL
) $(HOST_LIBS
)
1498 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
)
1499 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1501 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1502 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1503 gencodes.o
$(HOST_RTL
) $(HOST_LIBS
)
1505 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
)
1506 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1508 genemit
: genemit.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1509 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1510 genemit.o
$(HOST_RTL
) $(HOST_LIBS
)
1512 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
)
1513 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1515 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1516 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1517 genopinit.o
$(HOST_RTL
) $(HOST_LIBS
)
1519 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
)
1520 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1522 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1523 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1524 genrecog.o
$(HOST_RTL
) $(HOST_LIBS
)
1526 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
)
1527 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1529 genextract
: genextract.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1530 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1531 genextract.o
$(HOST_RTL
) $(HOST_LIBS
)
1533 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) insn-config.h
1534 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1536 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1537 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1538 genpeep.o
$(HOST_RTL
) $(HOST_LIBS
)
1540 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
)
1541 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1543 genattr
: genattr.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1544 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1545 genattr.o
$(HOST_RTL
) $(HOST_LIBS
)
1547 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
)
1548 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1550 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1551 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1552 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1554 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) insn-config.h
1555 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1557 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_LIBDEPS
)
1558 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1559 genoutput.o
$(HOST_RTL
) $(HOST_LIBS
)
1561 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
)
1562 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1564 # Compile the libraries to be used by gen*.
1565 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1566 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1567 # with the rules for rtl.o, alloca.o, etc.
1568 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) $(RTL_H
)
1569 rm -f
$(HOST_PREFIX
)rtl.c
1570 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1571 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1573 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
)
1574 rm -f
$(HOST_PREFIX
)print-rtl.c
1575 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1576 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1578 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1579 rm -f
$(HOST_PREFIX
)rtlanal.c
1580 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1581 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1583 $(HOST_PREFIX_1
)alloca.o
: alloca.c
1584 rm -f
$(HOST_PREFIX
)alloca.c
1585 cp
$(srcdir)/alloca.c
$(HOST_PREFIX
)alloca.c
1586 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1588 $(HOST_PREFIX_1
)obstack.o
: obstack.c
1589 rm -f
$(HOST_PREFIX
)obstack.c
1590 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/obstack.c
> $(HOST_PREFIX
)obstack.c
1591 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1593 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1594 rm -f
$(HOST_PREFIX
)malloc.c
1595 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1596 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1598 # This satisfies the dependency that we get if you cross-compile a compiler
1599 # that does not need to compile alloca, malloc or whatever.
1601 touch
$(HOST_PREFIX_1
)
1603 # Remake bytecode files.
1604 BI_OBJ
=bi-parser.o bi-lexer.o bi-reverse.o
1606 bc-emit.o
: bc-emit.c
$(CONFIG_H
) $(RTL_H
) real.h
$(BYTECODE_H
) \
1607 bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
1608 bc-optab.o
: bc-optab.c
$(CONFIG_H
) $(REAL_H
) $(BYTECODE_H
) \
1609 bc-opcode.h bc-typecd.h bc-typecd.def
1611 bi-arity
: bi-arity.o
$(BI_OBJ
) $(HOST_LIBDEPS
)
1612 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1613 bi-arity.o
$(BI_OBJ
) $(HOST_LIBS
)
1614 bi-opcode
: bi-opcode.o
$(BI_OBJ
) $(HOST_LIBDEPS
)
1615 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1616 bi-opcode.o
$(BI_OBJ
) $(HOST_LIBS
)
1617 bi-opname
: bi-opname.o
$(BI_OBJ
) $(HOST_LIBDEPS
)
1618 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1619 bi-opname.o
$(BI_OBJ
) $(HOST_LIBS
)
1621 $(srcdir)/bi-parser.h
: $(srcdir)/bi-parser.c
1622 $(srcdir)/bi-parser.c
: $(srcdir)/bi-parser.y
1623 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d bi-parser.y
-o bi-parser.c
1625 bi-parser.o
: $(srcdir)/bi-parser.c bi-defs.h
$(build_xm_file
)
1626 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1627 $(srcdir)/bi-parser.c
1628 bi-lexer.o
: bi-lexer.c
$(srcdir)/bi-parser.h
$(build_xm_file
)
1629 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1630 $(srcdir)/bi-lexer.c
1631 bi-arity.o
: bi-arity.c bi-defs.h
$(build_xm_file
)
1632 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1633 $(srcdir)/bi-arity.c
1634 bi-opcode.o
: bi-opcode.c bi-defs.h
$(build_xm_file
)
1635 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1636 $(srcdir)/bi-opcode.c
1637 bi-opname.o
: bi-opname.c bi-defs.h
$(build_xm_file
)
1638 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1639 $(srcdir)/bi-opname.c
1640 bi-reverse.o
: bi-reverse.c bi-defs.h
1641 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1642 $(srcdir)/bi-reverse.c
1644 bc-arity.h
: stamp-bcarity
; @true
1645 stamp-bcarity
: $(srcdir)/bytecode.def bi-arity
$(srcdir)/move-if-change
1646 .
/bi-arity
< $(srcdir)/bytecode.def
>tmp-bc-arity.h
1647 $(srcdir)/move-if-change tmp-bc-arity.h bc-arity.h
1650 bc-opcode.h
: stamp-bcopcode
; @true
1651 stamp-bcopcode
: $(srcdir)/bytecode.def bi-opcode
$(srcdir)/move-if-change
1652 .
/bi-opcode
< $(srcdir)/bytecode.def
>tmp-bcopcd.h
1653 $(srcdir)/move-if-change tmp-bcopcd.h bc-opcode.h
1654 touch stamp-bcopcode
1656 bc-opname.h
: stamp-bcopname
; @true
1657 stamp-bcopname
: $(srcdir)/bytecode.def bi-opname
$(srcdir)/move-if-change
1658 .
/bi-opname
< $(srcdir)/bytecode.def
>tmp-bcopnm.h
1659 $(srcdir)/move-if-change tmp-bcopnm.h bc-opname.h
1660 touch stamp-bcopname
1662 bytecode.
mostlyclean:
1663 -rm -f bc-arity.h bc-opcode.h bc-opname.h
1665 bytecode.
distclean bytecode.
clean: bytecode.
mostlyclean
1666 -rm -f bi-arity bi-opcode bi-opname bi-lexer
1668 bytecode.maintainer-clean
: bytecode.
clean
1669 -rm -f bi-parser.c bi-parser.h
1672 # Remake cpp and protoize.
1674 # Making the preprocessor
1677 ln
$(CCCP
)$(exeext
) cpp$(exeext
) > /dev
/null
2>&1 \
1678 || cp
$(CCCP
)$(exeext
) cpp$(exeext
)
1679 cccp
: cccp.o cexp.o version.o
$(LIBDEPS
)
1680 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ cccp.o cexp.o \
1682 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
)
1683 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1684 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1685 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1687 cccp.o
: cccp.c
$(CONFIG_H
) pcp.h version.c config.status
1688 # The reason we use $(libdir)/g++-include rather than using libsubdir
1689 # is for compatibility with the current version of libg++.
1690 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1691 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1692 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1693 -DOLD_GPLUSPLUS_INCLUDE_DIR
=\"$(old_gxx_include_dir
)\" \
1694 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1695 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/sys-include
\" \
1696 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1697 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1699 cppmain
: cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
1700 version.o
$(LIBDEPS
)
1701 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ cppmain.o cpplib.o cpphash.o \
1702 cppalloc.o cpperror.o cppexp.o version.o
$(LIBS
)
1704 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h cpphash.h config.status
1705 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1706 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1707 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1708 -DOLD_GPLUSPLUS_INCLUDE_DIR
=\"$(old_gxx_include_dir
)\" \
1709 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1710 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/sys-include
\" \
1711 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1712 -c
`echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
1714 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h
1716 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h
1718 cpphash.o
: cpphash.c cpplib.h cpphash.h
1720 cppalloc.o
: cppalloc.c
$(CONFIG_H
)
1722 # Note for the stamp targets, we run the program `true' instead of
1723 # having an empty command (nothing following the semicolon).
1725 proto
: config.status protoize unprotoize SYSCALLS.c.X
1727 protoize
: protoize.o getopt.o getopt1.o getpwd.o version.o \
1728 pexecute.o choose-temp.o
$(LIBDEPS
)
1729 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ \
1730 protoize.o getopt.o getopt1.o getpwd.o version.o \
1731 pexecute.o choose-temp.o
$(LIBS
)
1732 protoize.o
: stamp-proto
; @true
1734 unprotoize
: unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1735 pexecute.o choose-temp.o
$(LIBDEPS
)
1736 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ \
1737 unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1738 pexecute.o choose-temp.o
$(LIBS
)
1739 unprotoize.o
: stamp-proto
; @true
1741 stamp-proto
: protoize.c getopt.h
$(CONFIG_H
)
1742 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1743 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1744 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1745 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/sys-include
\" \
1746 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1747 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1748 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
1749 -DUNPROTOIZE
$(srcdir)/protoize.c
1750 mv protoize
$(objext
) unprotoize
$(objext
)
1751 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1752 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1753 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1754 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/sys-include
\" \
1755 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1756 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1757 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
1758 $(srcdir)/protoize.c
1761 getopt.o
: getopt.c getopt.h
1762 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(srcdir)/getopt.c
1763 getopt1.o
: getopt1.c getopt.h
1764 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(srcdir)/getopt1.c
1766 # This info describes the target machine, so compile with GCC just built.
1767 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
1769 -rm -f SYSCALLS.c tmp-SYSCALLS.s
1770 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
1771 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1772 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
1773 -rm -f SYSCALLS.c tmp-SYSCALLS.s
1776 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
1777 -rm -f tmp-proto.
[cso
]
1778 cp
$(srcdir)/protoize.c tmp-proto.c
1779 chmod u
+w tmp-proto.c
1780 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
1781 $(CFLAGS) $(INCLUDES) \
1782 -DGCC_INCLUDE_DIR=0 \
1783 -DGPLUSPLUS_INCLUDE_DIR=0 \
1784 -DCROSS_INCLUDE_DIR=0 \
1785 -DTOOL_INCLUDE_DIR=0 \
1786 -DSTD_PROTO_DIR=0" tmp-proto.c
1787 @echo
'**********' Expect
400 lines of differences.
1788 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
1789 -wc
-l tmp-proto.diff
1790 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
1791 $(CFLAGS) $(INCLUDES) \
1792 -DGCC_INCLUDE_DIR=0 \
1793 -DGPLUSPLUS_INCLUDE_DIR=0 \
1794 -DCROSS_INCLUDE_DIR=0 \
1795 -DTOOL_INCLUDE_DIR=0 \
1796 -DSTD_PROTO_DIR=0" tmp-proto.c
1797 @echo Expect zero differences.
1798 diff
$(srcdir)/protoize.c tmp-proto.c | cat
1799 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
1801 # Build the include directory. The stamp files are stmp-* rather than
1802 # stamp-* so that mostlyclean does not force the include directory to
1805 # Build the include directory except for float.h (which depends upon
1807 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h objc-headers
1808 # Copy in the headers provided with gcc.
1809 # The sed command gets just the last file name component;
1810 # this is necessary because VPATH could add a dirname.
1811 # Using basename would be simpler, but some systems don't have it.
1814 for file in ..
$(USER_H
); do \
1815 if
[ X
$$file != X..
]; then \
1816 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
1817 rm -f
$$objdir/include/$$realfile; \
1818 cp
$$file $$objdir/include; \
1819 chmod a
+r
$$objdir/include/$$realfile; \
1822 rm -f
include/limits.h
1823 cp xlimits.h
include/limits.h
1824 chmod a
+r
include/limits.h
1825 # Install the README
1826 rm -f
include/README
1827 cp
$(srcdir)/README-fixinc
include/README
1828 chmod a
+r
include/README
1831 # Build the complete include directory.
1832 stmp-headers
: stmp-int-hdrs gfloat.h
1833 rm -f
include/float.h
1834 cp gfloat.h
include/float.h
1835 chmod a
+r
include/float.h
1838 # Build fixed copies of system files.
1839 stmp-fixinc
: $(FIXINCLUDES
) gsyslimits.h
1842 if
[ x
$(FIXINCLUDES
) != xMakefile.in
]; \
1844 for
dir in
$(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
); do \
1847 $(SHELL
) $(srcdir)/$(FIXINCLUDES
) include $$dir; \
1852 rm -f
include/syslimits.h
1853 if
[ -f
include/limits.h
]; then \
1854 mv
include/limits.h
include/syslimits.h
; \
1856 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
1858 chmod a
+r
include/syslimits.h
1861 # copy objc header files into build directory
1862 objc-headers
: stmp-fixinc
1863 if
[ -d
include ]; then true
; else mkdir
include; fi
1864 if
[ -d objc
]; then true
; else mkdir objc
; fi
1866 srcdir1
=`cd $(srcdir); pwd`; \
1868 $(MAKE
) -f
$${srcdir1}/objc
/Makefile copy-headers \
1869 srcdir=$${srcdir1} tooldir
=$(tooldir
) AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" \
1870 GCC_FOR_TARGET
="$${thisdir1}/xgcc -B$${thisdir1}/" \
1871 GCC_CFLAGS
="$(GCC_CFLAGS)" incinstalldir
=$${thisdir1}/include
1874 # Files related to the fixproto script.
1876 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
1877 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
1879 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
1880 mv tmp-deduced.h deduced.h
1882 gen-protos
: gen-protos.o scan.o cppalloc.o
$(HOST_LIBDEPS
)
1883 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1884 gen-protos.o scan.o cppalloc.o
$(HOST_LIBS
)
1886 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
)
1887 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
1889 scan.o
: scan.c scan.h
$(build_xm_file
)
1890 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
1892 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
1893 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
1894 mv tmp-fixtmp.c fixtmp.c
1895 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
1896 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
1897 | .
/gen-protos
>xsys-protos.hT
1898 mv xsys-protos.hT xsys-protos.h
1901 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
1902 cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
1903 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
1904 scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o \
1905 cppexp.o
$(HOST_LIBS
)
1907 fix-header.o
: fix-header.c obstack.h scan.h xsys-protos.h
$(build_xm_file
)
1908 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
1910 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
)
1911 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
1913 # stmp-fixproto depends on this, not on fix-header directly.
1914 # The idea is to make sure fix-header gets built,
1915 # but not rerun fixproto after each stage
1916 # just because fix-header's mtime has changed.
1917 fixhdr.ready
: fix-header
1918 -if
[ -f fixhdr.ready
] ; then \
1921 touch fixhdr.ready
; \
1924 # stmp-headers is to make sure fixincludes has already finished.
1925 # The if statement is so that we don't run fixproto a second time
1926 # if it has already been run on the files in `include'.
1927 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
1928 @echo
"Various warnings and error messages from fixproto are normal"
1929 -if
[ -d
include ] ; then true
; else mkdir
include; fi
1930 -if
[ -f
include/fixed
] ; then true
; \
1932 : This line works around a
'make' bug in BSDI
1.1.
; \
1933 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
1934 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
1935 touch
include/fixed
; \
1939 # Remake the info files.
1942 info: $(srcdir)/cpp.
info $(srcdir)/gcc.
info lang.
info
1944 $(srcdir)/cpp.
info: cpp.texi
1945 cd
$(srcdir); $(MAKEINFO
) $(MAKEINFOFLAGS
) cpp.texi
1947 $(srcdir)/gcc.
info: gcc.texi extend.texi
install.texi invoke.texi \
1948 md.texi rtl.texi tm.texi
1949 cd
$(srcdir); $(MAKEINFO
) $(MAKEINFOFLAGS
) gcc.texi
1951 dvi: $(srcdir)/gcc.
dvi $(srcdir)/cpp.
dvi lang.
dvi
1953 # This works with GNU Make's default rule.
1954 $(srcdir)/gcc.
dvi: gcc.texi extend.texi
install.texi invoke.texi \
1955 md.texi rtl.texi tm.texi
1958 # This works with GNU Make's default rule.
1959 $(srcdir)/cpp.
dvi: cpp.texi
1962 $(srcdir)/INSTALL
: install1.texi
install.texi
1963 $(MAKEINFO
) -D INSTALLONLY
--no-header
--no-split \
1964 `echo $(srcdir)/install1.texi | sed 's,^\./,,'`
1966 # Deletion of files made during compilation.
1967 # There are four levels of this:
1968 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
1969 # `mostlyclean' is useful while working on a particular type of machine.
1970 # It deletes most, but not all, of the files made by compilation.
1971 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
1972 # `clean' deletes everything made by running `make all'.
1973 # `distclean' also deletes the files made by config.
1974 # `maintainer-clean' also deletes everything that could be regenerated
1975 # automatically. We remove as much from the language subdirectories as we can
1976 # (less duplicated code).
1979 mostlyclean: bytecode.
mostlyclean lang.
mostlyclean
1980 -rm -f
$(STAGESTUFF
)
1981 # Clean the objc subdir if we created one.
1982 if
[ -d objc
]; then \
1983 srcdir1
=`cd $(srcdir); pwd`; \
1984 cd objc
; $(MAKE
) -f
$$srcdir1/objc
/Makefile
mostlyclean; \
1987 # Delete the temporary source copies for cross compilation.
1988 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
1989 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
1990 -rm -f
$(HOST_PREFIX_1
)obstack.c
1991 # Delete the temp files made in the course of building libgcc.a.
1992 -rm -f tmplibgcc
* tmpcopy xlimits.h
1993 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
1994 # Delete other temporary files.
1995 -rm -f tmp-float.h tmp-gcc.xtar.gz
1996 -rm -f tmp-foo1 tmp-foo2 tmp-proto.
* tmp-unproto
.1 tmp-SYSCALLS.s
1997 -rm -f tmp-c-parse.y tmp-objc-prs.y tmp-gperf.h
1998 -rm -f tmp-specs t-float.h-cross tmp-xlimits.h
1999 -rm -f tmp-fixtmp.c xsys-protos.hT
2000 # Delete the stamp files.
2001 -rm -f stamp-
* tmp-
*
2002 -rm -f
*/stamp-
* */tmp-
*
2003 # Delete debugging dump files.
2004 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2005 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
2006 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2007 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2008 -rm -f
*/*.sched2
*/*.stack
2009 # Delete some files made during installation.
2010 -rm -f specs gfloat.h float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2011 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2012 # Delete files generated for fixproto
2013 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2014 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2015 # Delete unwanted output files from TeX.
2016 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2017 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2018 # Delete sorted indices we don't actually use.
2019 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2020 # Delete core dumps.
2023 # Delete all files made by compilation
2024 # that don't exist in the distribution.
2025 clean: mostlyclean bytecode.
clean lang.
clean
2026 # It may not be quite desirable to delete unprotoize.c here,
2027 # but the spec for `make clean' requires it.
2028 # Using unprotoize.c is not quite right in the first place,
2029 # but what better way is there?
2030 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2034 -if
[ -f md.pre-cpp
]; then \
2037 # Delete the include directory.
2038 -rm -rf stmp-
* include objc-headers
2040 # Delete files used by the "multilib" facility (including libgcc subdirs).
2041 -rm -f multilib.h tmpmultilib
*
2042 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2043 rm -rf
$(MULTILIB_DIRNAMES
); \
2044 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2045 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2048 # Delete all files that users would normally create
2049 # while building and installing GCC.
2050 distclean: clean bytecode.
distclean lang.
distclean
2051 -rm -f tm.h config.h tconfig.h hconfig.h md
2052 -rm -f config.status config.run
2053 -rm -f Makefile specs.h options.h
*.oaux
2054 -rm -fr stage1 stage2 stage3 stage4
2055 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2056 -rm -f objc-parse.output
2057 -rm -f c-parse.output
2061 # Delete anything likely to be found in the source directory
2062 # that shouldn't be in the distribution.
2063 extraclean
: distclean lang.extraclean
2064 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2065 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2066 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2067 -rm -f config
/*/*.orig config
/*/*.rej
2068 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2069 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2070 -rm -f
*lose config
/*lose config
/*/*lose
2071 -rm -f
*.s
*.s
[0-9] *.i install1.texi config
/ChangeLog
2072 -rm -f
*/=* */"#"* */*~
*
2073 -rm -f
*/patch
* */*.orig
*/*.rej
2074 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2075 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2076 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2078 # Get rid of every file that's generated from some other file.
2079 # Most of these files ARE PRESENT in the GCC distribution.
2080 maintainer-clean
: distclean bytecode.maintainer-clean lang.maintainer-clean
2081 -rm -f c-parse.y c-gperf.h objc-parse.y
2082 -rm -f objc-parse.c objc-parse.output
2083 -rm -f c-parse.c c-parse.h c-parse.output
2084 -rm -f cexp.c cexp.output TAGS
2085 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2086 -rm -f gcc.
info* gcc.??s gcc.
*aux
2088 # Entry points `install' and `uninstall'.
2089 # Also use `install-collect2' to install collect2 when the config files don't.
2091 # The semicolon is to prevent the install.sh -> install default rule
2092 # from doing anything. Having it run true helps avoid problems and
2093 # noise from versions of make which don't like to have null commands.
2094 install: $(INSTALL_TARGET
) ; @true
2096 # Copy the compiler files into directories where they will be run.
2097 # Install the driver last so that the window when things are
2099 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2100 install-libobjc install-man install-info lang.install-normal install-driver
2102 # Do nothing while making gcc with a cross-compiler. The person who
2103 # makes gcc for the target machine has to know how to put a complete
2104 # gcc together by hand.
2105 install-build
: force
2106 @echo You have to
install gcc on your target machine by hand.
2108 # Run this on the target machine
2109 # to finish installation of cross compiler.
2110 install-cross-rest
: install-float-h-cross
2112 # Install float.h for cross compiler.
2113 # Run this on the target machine!
2114 install-float-h-cross
: install-dir
2115 # if [ -f enquire ] ; then true; else false; fi
2116 # Note: don't use -. We should fail right away if enquire was not made.
2117 .
/enquire
-f
> $(tmpdir
)/float.h
2118 -rm -f
$(libsubdir
)/include/float.h
2119 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2120 -rm -f
$(tmpdir
)/float.h
2121 chmod a-x
$(libsubdir
)/include/float.h
2123 # Create the installation directory.
2125 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2126 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2127 # This dir isn't currently searched by cpp.
2128 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2129 -if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; chmod a
+rx
$(libdir)/gcc-lib
/$(target_alias
) ; fi
2130 -if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; chmod a
+rx
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
2131 -if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
)/include ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
)/include ; chmod a
+rx
$(libdir)/gcc-lib
/$(target_alias
)/$(version
)/include ; fi
2132 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2133 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2134 -if
[ -d
$(tooldir
) ] ; then true
; else mkdir
$(tooldir
) ; chmod a
+rx
$(tooldir
) ; fi
2135 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2136 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2137 # We don't use mkdir -p to create the parents of mandir,
2138 # because some systems don't support it.
2139 # Instead, we use this technique to create the immediate parent of mandir.
2140 -parent
=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
2141 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2142 -if
[ -d
$(mandir) ] ; then true
; else mkdir
$(mandir) ; chmod a
+rx
$(mandir) ; fi
2144 # Install the compiler executables built during cross compilation.
2145 install-common
: native install-dir
$(EXTRA_PARTS
) lang.install-common
2146 for file in
$(COMPILERS
); do \
2147 if
[ -f
$$file ] ; then \
2148 rm -f
$(libsubdir
)/$$file; \
2149 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2153 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2154 if
[ x
"$$file" != x..
]; then \
2155 rm -f
$(libsubdir
)/$$file; \
2156 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2159 for file in
$(EXTRA_PARTS
) ..
; do \
2160 if
[ x
"$$file" != x..
]; then \
2161 rm -f
$(libsubdir
)/$$file; \
2162 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2165 # Don't mess with specs if it doesn't exist yet.
2166 -if
[ -f specs
] ; then \
2167 rm -f
$(libsubdir
)/specs
; \
2168 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2170 # Install protoize if it was compiled.
2171 -if
[ -f protoize
$(exeext
) ]; \
2173 rm -f
$(bindir)/protoize
$(exeext
); \
2174 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/protoize
$(exeext
); \
2175 rm -f
$(bindir)/unprotoize
$(exeext
); \
2176 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/unprotoize
$(exeext
); \
2177 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2178 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2179 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2181 -rm -f
$(libsubdir
)/cpp$(exeext
)
2182 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2184 # Install the driver program as $(target_alias)-gcc
2185 # and also as either gcc (if native) or $(tooldir)/bin/gcc.
2186 install-driver
: xgcc
2187 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2188 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2189 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2190 if
[ -d
$(tooldir
)/bin
/.
] ; then \
2191 rm -f
$(tooldir
)/bin
/gcc
$(exeext
); \
2192 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(tooldir
)/bin
/gcc
$(exeext
); \
2195 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2196 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2197 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2198 ln
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
) \
2200 || cp
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2201 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2204 # Install the info files.
2205 install-info
: doc install-dir lang.install-info
2206 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2207 cd
$(srcdir); for f in
cpp.
info* gcc.
info*; \
2208 do
$(INSTALL_DATA
) $$f $(infodir)/$$f; done
2209 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2211 # Install the man pages.
2212 install-man
: install-dir
$(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2213 -if
[ -f gcc-cross
] ; then \
2214 rm -f
$(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2215 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2216 chmod a-x
$(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2218 rm -f
$(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2219 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2220 chmod a-x
$(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2222 -rm -f
$(mandir)/cccp
$(manext)
2223 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(mandir)/cccp
$(manext)
2224 -chmod a-x
$(mandir)/cccp
$(manext)
2226 # Install the library.
2227 install-libgcc
: libgcc.a install-dir
2228 -if
[ -f libgcc.a
] ; then \
2229 rm -f
$(libsubdir
)/libgcc.a
; \
2230 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2231 if
$(RANLIB_TEST
) ; then \
2232 (cd
$(libsubdir
); $(RANLIB
) libgcc.a
); else true
; fi
; \
2233 chmod a-x
$(libsubdir
)/libgcc.a
; \
2236 # Install multiple versions of libgcc.a.
2237 install-multilib
: stmp-multilib install-dir
2238 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2239 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2240 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2241 rm -f
$(libsubdir
)/$${dir}/libgcc.a
; \
2242 $(INSTALL_DATA
) $${dir}/libgcc.a
$(libsubdir
)/$${dir}/libgcc.a
; \
2243 if
$(RANLIB_TEST
); then \
2244 (cd
$(libsubdir
)/$${dir}; $(RANLIB
) libgcc.a
); else true
; fi
; \
2245 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2248 # Install the objc run time library.
2249 install-libobjc
: install-dir
2250 -if
[ -f libobjc.a
] ; then \
2251 rm -f
$(libsubdir
)/libobjc.a
; \
2252 $(INSTALL_DATA
) libobjc.a
$(libsubdir
)/libobjc.a
; \
2253 if
$(RANLIB_TEST
) ; then \
2254 (cd
$(libsubdir
); $(RANLIB
) libobjc.a
); else true
; fi
; \
2255 chmod a-x
$(libsubdir
)/libobjc.a
; \
2258 # Install all the header files built in the include subdirectory.
2259 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2260 # Fix symlinks to absolute paths in the installed include directory to
2261 # point to the installed directory, not the build directory.
2262 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2263 if
[ $$?
-eq
0 ]; then \
2264 dir=`cd include; pwd`; \
2265 for i in
$$files; do \
2266 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2267 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2268 rm -f
$(libsubdir
)/include/$$i; \
2269 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2274 # Create or recreate the gcc private include file directory.
2275 install-include-dir
: install-dir
2276 -rm -rf
$(libsubdir
)/include
2277 mkdir
$(libsubdir
)/include
2278 -chmod a
+rx
$(libsubdir
)/include
2280 # Install the include directory using tar.
2281 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2283 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2284 # /bin/sh on some systems returns the status of the first tar,
2285 # and that can lose with GNU tar which always writes a full block.
2286 # So use `exit 0' to ignore its exit status.
2288 # Install the include directory using cpio.
2289 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2290 (cd
include; find .
-print) |
(cd
include; cpio
-pdum
$(libsubdir
)/include)
2292 # Put assert.h where it won't override GNU libc's assert.h.
2293 # It goes in a dir that is searched after GNU libc's headers;
2294 # thus, the following conditionals are no longer needed.
2295 # But it's not worth deleting them now.
2296 ## Don't replace the assert.h already there if it is not from GCC.
2297 ## This code would be simpler if it tested for -f ... && ! grep ...
2298 ## but supposedly the ! operator is missing in sh on some systems.
2299 install-assert-h
: assert.h install-dir
2300 if
[ -f
$(assertdir
)/assert.h
]; \
2302 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2304 rm -f
$(assertdir
)/assert.h
; \
2305 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2306 chmod a-x
$(assertdir
)/assert.h
; \
2310 rm -f
$(assertdir
)/assert.h
; \
2311 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2312 chmod a-x
$(assertdir
)/assert.h
; \
2315 # Use this target to install the program `collect2' under the name `ld'.
2316 install-collect2
: collect2 install-dir
2317 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/ld$(exeext
)
2318 # Install the driver program as $(libsubdir)/gcc for collect2.
2319 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2321 # Cancel installation by deleting the installed files.
2322 uninstall: lang.
uninstall
2323 -rm -rf
$(libsubdir
)
2324 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2325 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2326 -rm -rf
$(bindir)/protoize
$(exeext
)
2327 -rm -rf
$(bindir)/unprotoize
$(exeext
)
2328 -rm -rf
$(mandir)/$(GCC_INSTALL_NAME
)$(manext)
2329 -rm -rf
$(mandir)/$(GCC_CROSS_NAME
)$(manext)
2330 -rm -rf
$(mandir)/cccp
$(manext)
2331 -rm -rf
$(mandir)/protoize
$(manext)
2332 -rm -rf
$(mandir)/unprotoize
$(manext)
2334 # These exist for maintenance purposes.
2336 # Update the tags table.
2340 mv
-f c-parse.
[ch
] objc-parse.c cexp.c
=*.
[chy
] temp
; \
2341 etags
*.y
*.h
*.c
; \
2345 # Create the distribution tar file.
2346 #dist: gcc-$(version).tar.gz
2349 gcc.xtar.gz
: gcc.xtar
2350 gzip
--best
< gcc.xtar
> tmp-gcc.xtar.gz
2351 mv tmp-gcc.xtar.gz gcc.xtar.gz
2353 #gcc-$(version).tar.gz: gcc-$(version).tar
2354 # gzip < gcc-$(version).tar > gcc-$(version).tar.gz
2356 #gcc-$(version).tar:
2358 # Make the distribution.
2359 tar -chf gcc.xtar gcc-
$(version
)
2361 # This target exists to do the initial work before the language specific
2363 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2364 $(srcdir)/objc-parse.y
$(srcdir)/c-parse.c
$(srcdir)/objc-parse.c \
2366 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2368 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2370 # Update the version number in README
2371 awk
'$$1 " " $$2 " " $$3 == "This directory contains" \
2372 { $$6 = version; print $$0 } \
2373 $$1 " " $$2 " " $$3 != "This directory contains"' \
2374 version
=$(version
) README
> tmp.README
2375 mv tmp.README README
2376 -rm -rf gcc-
$(version
) tmp
2377 # Put all the files in a temporary subdirectory
2378 # which has the name that we want to have in the tar file.
2383 for file in
*[0-9a-zA-Z
+]; do \
2384 ln
$$file tmp
> /dev
/null
2>&1 || cp
$$file tmp
; \
2387 for file in
*[0-9a-zA-Z
+]; do \
2388 if
test -d
$$file && test "$$file" != RCS
; then \
2389 mkdir ..
/tmp
/config
/$$file; \
2391 for subfile in
*[0-9a-zA-Z
+]; do \
2392 ln
$$subfile ..
/..
/tmp
/config
/$$file >/dev
/null
2>&1 \
2393 || cp
$$subfile ..
/..
/tmp
/config
/$$file; \
2397 ln
$$file ..
/tmp
/config
>/dev
/null
2>&1 \
2398 || cp
$$file ..
/tmp
/config
; \
2402 for file in
*[0-9a-zA-Z
+]; do \
2403 ln
$$file ..
/tmp
/ginclude
>/dev
/null
2>&1 \
2404 || cp
$$file ..
/tmp
/ginclude
; \
2407 for file in
*[0-9a-zA-Z
+]; do \
2408 ln
$$file ..
/tmp
/objc
>/dev
/null
2>&1 || cp
$$file ..
/tmp
/objc
; \
2412 # Finish making `distdir', after the languages have done their thing.
2414 mv tmp gcc-
$(version
)
2415 # Get rid of everything we don't want in the distribution. We'd want
2416 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2418 cd gcc-
$(version
); make extraclean
2420 distdir
: distdir-start lang.distdir distdir-finish
2422 # make diff oldversion=M.N
2423 # creates a diff file between an older distribution and this one.
2424 # The -P option assumes this is GNU diff.
2426 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2427 -x cexp.c
-x bi-parser.c
-x objc-parse.y
-x objc-parse.c \
2429 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2430 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2431 $(LANG_DIFF_EXCLUDES
) \
2432 gcc-
$(oldversion
) gcc-
$(version
) > diffs
2435 # Only build the C compiler for stage1, because that is the only one that
2436 # we can guarantee will build with the native compiler, and also it is the
2437 # only thing useful for building stage2.
2438 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2440 # This used to define ALLOCA as empty, but that would lead to bad results
2441 # for a subsequent `make install' since that would not have ALLOCA empty.
2442 # To prevent `make install' from compiling alloca.o and then relinking cc1
2443 # because alloca.o is newer, we permit these recursive makes to compile
2444 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2445 $(MAKE
) CC
="stage1/xgcc -Bstage1/" CFLAGS
="$(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2447 $(MAKE
) CC
="stage2/xgcc -Bstage2/" CFLAGS
="$(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2450 $(MAKE
) CC
="stage1/xgcc -Bstage1/" CFLAGS
="$(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2452 $(MAKE
) CC
="stage2/xgcc -Bstage2/" CFLAGS
="$(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2455 $(MAKE
) CC
="stage2/xgcc -Bstage2/" CFLAGS
="$(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2457 # Compare the object files in the current directory with those in the
2460 # ./ avoids bug in some versions of tail.
2462 for file in
*$(objext
); do \
2463 tail
+16c .
/$$file > tmp-foo1
; \
2464 tail
+16c stage2
/$$file > tmp-foo2
2>/dev
/null \
2465 && (cmp tmp-foo1 tmp-foo2 || echo
$$file differs
) || true
; \
2467 for
dir in tmp-foo
$(SUBDIRS
); do \
2468 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2469 for file in
$$dir/*$(objext
); do \
2470 tail
+16c .
/$$file > tmp-foo1
; \
2471 tail
+16c stage2
/$$file > tmp-foo2
2>/dev
/null \
2472 && (cmp tmp-foo1 tmp-foo2 || echo
$$file differs
) || true
; \
2478 # Similar, but compare with stage3 directory
2480 for file in
*$(objext
); do \
2481 tail
+16c .
/$$file > tmp-foo1
; \
2482 tail
+16c stage3
/$$file > tmp-foo2
2>/dev
/null \
2483 && (cmp tmp-foo1 tmp-foo2 || echo
$$file differs
) || true
; \
2485 for
dir in tmp-foo
$(SUBDIRS
); do \
2486 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2487 for file in
$$dir/*$(objext
); do \
2488 tail
+16c .
/$$file > tmp-foo1
; \
2489 tail
+16c stage3
/$$file > tmp-foo2
2>/dev
/null \
2490 && (cmp tmp-foo1 tmp-foo2 || echo
$$file differs
) || true
; \
2496 # Compare the object files in the current directory with those in the
2497 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2498 # running tail and the overhead of twice copying each object file.
2501 for file in
*$(objext
); do \
2502 cmp
--ignore-initial
=16 $$file stage2
/$$file || true
; \
2504 for
dir in tmp-foo
$(SUBDIRS
); do \
2505 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2506 for file in
$$dir/*$(objext
); do \
2507 cmp
--ignore-initial
=16 $$file stage2
/$$file || true
; \
2512 # Similar, but compare with stage3 directory
2514 for file in
*$(objext
); do \
2515 cmp
--ignore-initial
=16 $$file stage3
/$$file || true
; \
2517 for
dir in tmp-foo
$(SUBDIRS
); do \
2518 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2519 for file in
$$dir/*$(objext
); do \
2520 cmp
--ignore-initial
=16 $$file stage3
/$$file || true
; \
2525 # Copy the object files from a particular stage into a subdirectory.
2527 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
2528 -for
dir in .
$(SUBDIRS
) ; \
2530 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
2532 -mv
$(STAGESTUFF
) stage1
2533 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2534 # dir will work properly.
2535 -if
[ -f
as$(exeext
) ] ; then ln
-s ..
/as$(exeext
) stage1 || cp
as$(exeext
) stage1
; else true
; fi
2536 -if
[ -f
ld$(exeext
) ] ; then ln
-s ..
/ld$(exeext
) stage1 || cp
ld$(exeext
) stage1
; else true
; fi
2537 -if
[ -f collect-ld
$(exeext
) ] ; then ln
-s ..
/collect-ld
$(exeext
) stage1 || cp collect-ld
$(exeext
) stage1
; else true
; fi
2538 -rm -f stage1
/libgcc.a
2540 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage1
/libgcc.a
; else true
; fi
2541 stage1
: force stage1-start lang.stage1
2544 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
2545 -for
dir in .
$(SUBDIRS
) ; \
2547 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
2549 -mv
$(STAGESTUFF
) stage2
2550 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2551 # dir will work properly.
2552 -if
[ -f
as$(exeext
) ] ; then ln
-s ..
/as$(exeext
) stage2 || cp
as$(exeext
) stage2
; else true
; fi
2553 -if
[ -f
ld$(exeext
) ] ; then ln
-s ..
/ld$(exeext
) stage2 || cp
ld$(exeext
) stage2
; else true
; fi
2554 -if
[ -f collect-ld
] ; then ln
-s ..
/collect-ld
$(exeext
) stage2 || cp collect-ld
$(exeext
) stage2
; else true
; fi
2555 -rm -f stage2
/libgcc.a
2557 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage2
/libgcc.a
; else true
; fi
2558 stage2
: force stage2-start lang.stage2
2561 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
2562 -for
dir in .
$(SUBDIRS
) ; \
2564 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
2566 -mv
$(STAGESTUFF
) stage3
2567 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2568 # dir will work properly.
2569 -if
[ -f
as$(exeext
) ] ; then ln
-s ..
/as$(exeext
) stage3 || cp
as$(exeext
) stage3
; else true
; fi
2570 -if
[ -f
ld$(exeext
) ] ; then ln
-s ..
/ld$(exeext
) stage3 || cp
ld$(exeext
) stage3
; else true
; fi
2571 -if
[ -f collect-ld
$(exeext
) ] ; then ln
-s ..
/collect-ld
$(exeext
) stage3 || cp collect-ld
$(exeext
) stage3
; else true
; fi
2572 -rm -f stage3
/libgcc.a
2574 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage3
/libgcc.a
; else true
; fi
2575 stage3
: force stage3-start lang.stage3
2578 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
2579 -for
dir in .
$(SUBDIRS
) ; \
2581 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
2583 -mv
$(STAGESTUFF
) stage4
2584 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2585 # dir will work properly.
2586 -if
[ -f
as$(exeext
) ] ; then ln
-s ..
/as$(exeext
) stage4 || cp
as$(exeext
) stage4
; else true
; fi
2587 -if
[ -f
ld$(exeext
) ] ; then ln
-s ..
/ld$(exeext
) stage4 || cp
ld$(exeext
) stage4
; else true
; fi
2588 -if
[ -f collect-ld
$(exeext
) ] ; then ln
-s ..
/collect-ld
$(exeext
) stage4 || cp collect-ld
$(exeext
) stage4
; else true
; fi
2589 -rm -f stage4
/libgcc.a
2591 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage4
/libgcc.a
; else true
; fi
2592 stage4
: force stage4-start lang.stage4
2594 # Copy just the executable files from a particular stage into a subdirectory,
2595 # and delete the object files. Use this if you're just verifying a version
2596 # that is pretty sure to work, and you are short of disk space.
2597 risky-stage1
: stage1
2600 risky-stage2
: stage2
2603 risky-stage3
: stage3
2606 risky-stage4
: stage4
2609 #In GNU Make, ignore whether `stage*' exists.
2610 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
2611 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4