1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2010, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
30 ------------------------------------------------------------------------------
32 with Namet; use Namet;
33 with Snames; use Snames;
34 with Types; use Types;
35 with Uintp; use Uintp;
36 with Urealp; use Urealp;
40 -- This package defines the annotations to the abstract syntax tree that
41 -- are needed to support semantic processing of an Ada compilation.
43 -- Note that after editing this spec and the corresponding body it is
44 -- required to run ceinfo to check the consistentcy of spec and body.
45 -- See ceinfo.adb for more information about the checks made.
47 -- These annotations are for the most part attributes of declared entities,
48 -- and they correspond to conventional symbol table information. Other
49 -- attributes include sets of meanings for overloaded names, possible
50 -- types for overloaded expressions, flags to indicate deferred constants,
51 -- incomplete types, etc. These attributes are stored in available fields
52 -- in tree nodes (i.e. fields not used by the parser, as defined by the
53 -- Sinfo package specification), and accessed by means of a set of
54 -- subprograms which define an abstract interface.
56 -- There are two kinds of semantic information
58 -- First, the tree nodes with the following Nkind values:
60 -- N_Defining_Identifier
61 -- N_Defining_Character_Literal
62 -- N_Defining_Operator_Symbol
64 -- are called Entities, and constitute the information that would often
65 -- be stored separately in a symbol table. These nodes are all extended
66 -- to provide extra space, and contain fields which depend on the entity
67 -- kind, as defined by the contents of the Ekind field. The use of the
68 -- Ekind field, and the associated fields in the entity, are defined
69 -- in this package, as are the access functions to these fields.
71 -- Second, in some cases semantic information is stored directly in other
72 -- kinds of nodes, e.g. the Etype field, used to indicate the type of an
73 -- expression. The access functions to these fields are defined in the
74 -- Sinfo package, but their full documentation is to be found in
75 -- the Einfo package specification.
77 -- Declaration processing places information in the nodes of their defining
78 -- identifiers. Name resolution places in all other occurrences of an
79 -- identifier a pointer to the corresponding defining occurrence.
81 --------------------------------
82 -- The XEINFO Utility Program --
83 --------------------------------
85 -- XEINFO is a utility program which automatically produces a C header file,
86 -- einfo.h from the spec and body of package Einfo. It reads the input
87 -- files einfo.ads and einfo.adb and produces the output file einfo.h.
88 -- XEINFO is run automatically by the build scripts when you do a full
91 -- In order for this utility program to operate correctly, the form of the
92 -- einfo.ads and einfo.adb files must meet certain requirements and be laid
93 -- out in a specific manner.
95 -- The general form of einfo.ads is as follows:
97 -- type declaration for type Entity_Kind
98 -- subtype declarations declaring subranges of Entity_Kind
99 -- subtype declarations declaring synonyms for some standard types
100 -- function specs for attributes
102 -- pragma Inline declarations
104 -- This order must be observed. There are no restrictions on the procedures,
105 -- since the C header file only includes functions (Gigi is not allowed to
106 -- modify the generated tree). However, functions are required to have headers
107 -- that fit on a single line.
109 -- XEINFO reads and processes the function specs and the pragma Inlines. For
110 -- functions that are declared as inlined, XEINFO reads the corresponding body
111 -- from einfo.adb, and processes it into C code. This results in some strict
112 -- restrictions on which functions can be inlined:
114 -- The function spec must be on a single line
116 -- There can only be a single statement, contained on a single line,
117 -- not counting any pragma Assert statements.
119 -- This single statement must either be a function call with simple,
120 -- single token arguments, or it must be a membership test of the form
121 -- a in b, where a and b are single tokens.
123 -- For functions that are not inlined, there is no restriction on the body,
124 -- and XEINFO generates a direct reference in the C header file which allows
125 -- the C code in Gigi to directly call the corresponding Ada body.
127 ----------------------------------
128 -- Handling of Type'Size Values --
129 ----------------------------------
131 -- The Ada 95 RM contains some rather peculiar (to us!) rules on the value
132 -- of type'Size (see RM 13.3(55)). We have found that attempting to use
133 -- these RM Size values generally, and in particular for determining the
134 -- default size of objects, creates chaos, and major incompatibilies in
137 -- We proceed as follows, for discrete and fixed-point subtypes, we have
138 -- two separate sizes for each subtype:
140 -- The Object_Size, which is used for determining the default size of
141 -- objects and components. This size value can be referred to using the
142 -- Object_Size attribute. The phrase "is used" here means that it is
143 -- the basis of the determination of the size. The backend is free to
144 -- pad this up if necessary for efficiency, e.g. an 8-bit stand-alone
145 -- character might be stored in 32 bits on a machine with no efficient
146 -- byte access instructions such as the Alpha.
148 -- The default rules for the value of Object_Size for fixed-point and
149 -- discrete types are as follows:
151 -- The Object_Size for base subtypes reflect the natural hardware
152 -- size in bits (see Ttypes and Cstand for integer types). For
153 -- enumeration and fixed-point base subtypes have 8. 16. 32 or 64
154 -- bits for this size, depending on the range of values to be stored.
156 -- The Object_Size of a subtype is the same as the Object_Size of
157 -- the subtype from which it is obtained.
159 -- The Object_Size of a derived base type is copied from the parent
160 -- base type, and the Object_Size of a derived first subtype is copied
161 -- from the parent first subtype.
163 -- The Value_Size which is the number of bits required to store a value
164 -- of the type. This size can be referred to using the Value_Size
165 -- attribute. This value is used to determine how tightly to pack
166 -- records or arrays with components of this type, and also affects
167 -- the semantics of unchecked conversion (unchecked conversions where
168 -- the Value_Size values differ generate a warning, and are potentially
169 -- target dependent).
171 -- The default rule for the value of Value_Size are as follows:
173 -- The Value_Size for a base subtype is the minimum number of bits
174 -- required to store all values of the type (including the sign bit
175 -- only if negative values are possible).
177 -- If a subtype statically matches the first subtype, then it has
178 -- by default the same Value_Size as the first subtype. This is a
179 -- consequence of RM 13.1(14) ("if two subtypes statically match,
180 -- then their subtype-specific aspects are the same".)
182 -- All other subtypes have a Value_Size corresponding to the minimum
183 -- number of bits required to store all values of the subtype. For
184 -- dynamic bounds, it is assumed that the value can range down or up
185 -- to the corresponding bound of the ancestor
187 -- The RM defined attribute Size corresponds to the Value_Size attribute
189 -- The Size attribute may be defined for a first-named subtype. This sets
190 -- the Value_Size of the first-named subtype to the given value, and the
191 -- Object_Size of this first-named subtype to the given value padded up
192 -- to an appropriate boundary. It is a consequence of the default rules
193 -- above that this Object_Size will apply to all further subtypes. On the
194 -- other hand, Value_Size is affected only for the first subtype, any
195 -- dynamic subtypes obtained from it directly, and any statically matching
196 -- subtypes. The Value_Size of any other static subtypes is not affected.
198 -- Value_Size and Object_Size may be explicitly set for any subtype using
199 -- an attribute definition clause. Note that the use of these attributes
200 -- can cause the RM 13.1(14) rule to be violated. If two access types
201 -- reference aliased objects whose subtypes have differing Object_Size
202 -- values as a result of explicit attribute definition clauses, then it
203 -- is erroneous to convert from one access subtype to the other.
205 -- At the implementation level, Esize stores the Object_Size and the
206 -- RM_Size field stores the Value_Size (and hence the value of the
207 -- Size attribute, which, as noted above, is equivalent to Value_Size).
209 -- To get a feel for the difference, consider the following examples (note
210 -- that in each case the base is short_short_integer with a size of 8):
212 -- Object_Size Value_Size
214 -- type x1 is range 0..5; 8 3
216 -- type x2 is range 0..5;
217 -- for x2'size use 12; 16 12
219 -- subtype x3 is x2 range 0 .. 3; 16 2
221 -- subtype x4 is x2'base range 0 .. 10; 8 4
223 -- subtype x5 is x2 range 0 .. dynamic; 16 (7)
225 -- subtype x6 is x2'base range 0 .. dynamic; 8 (7)
227 -- Note: the entries marked (7) are not actually specified by the Ada 95 RM,
228 -- but it seems in the spirit of the RM rules to allocate the minimum number
229 -- of bits known to be large enough to hold the given range of values.
231 -- So far, so good, but GNAT has to obey the RM rules, so the question is
232 -- under what conditions must the RM Size be used. The following is a list
233 -- of the occasions on which the RM Size must be used:
235 -- Component size for packed arrays or records
236 -- Value of the attribute Size for a type
237 -- Warning about sizes not matching for unchecked conversion
239 -- The RM_Size field keeps track of the RM Size as needed in these
242 -- For elementary types other than discrete and fixed-point types, the
243 -- Object_Size and Value_Size are the same (and equivalent to the RM
244 -- attribute Size). Only Size may be specified for such types.
246 -- For composite types, Object_Size and Value_Size are computed from their
247 -- respective value for the type of each element as well as the layout.
249 -- All size attributes are stored as Uint values. Negative values are used to
250 -- reference GCC expressions for the case of non-static sizes, as explained
253 --------------------------------------
254 -- Delayed Freezing and Elaboration --
255 --------------------------------------
257 -- The flag Has_Delayed_Freeze indicates that an entity carries an explicit
258 -- freeze node, which appears later in the expanded tree.
260 -- a) The flag is used by the front-end to trigger expansion actions which
261 -- include the generation of that freeze node. Typically this happens at the
262 -- end of the current compilation unit, or before the first subprogram body is
263 -- encountered in the current unit. See files freeze and exp_ch13 for details
264 -- on the actions triggered by a freeze node, which include the construction
265 -- of initialization procedures and dispatch tables.
267 -- b) The presence of a freeze node on an entity is used by the backend to
268 -- defer elaboration of the entity until its freeze node is seen. In the
269 -- absence of an explicit freeze node, an entity is frozen (and elaborated)
270 -- at the point of declaration.
272 -- For object declarations, the flag is set when an address clause for the
273 -- object is encountered. Legality checks on the address expression only take
274 -- place at the freeze point of the object.
276 -- Most types have an explicit freeze node, because they cannot be elaborated
277 -- until all representation and operational items that apply to them have been
278 -- analyzed. Private types and incomplete types have the flag set as well, as
279 -- do task and protected types.
281 -- Implicit base types created for type derivations, as well as classwide
282 -- types created for all tagged types, have the flag set.
284 -- If a subprogram has an access parameter whose designated type is incomplete
285 -- the subprogram has the flag set.
287 -----------------------
288 -- Entity Attributes --
289 -----------------------
291 -- This section contains a complete list of the attributes that are defined
292 -- on entities. Some attributes apply to all entities, others only to certain
293 -- kinds of entities. In the latter case the attribute should only be set or
294 -- accessed if the Ekind field indicates an appropriate entity.
296 -- There are two kinds of attributes that apply to entities, stored and
297 -- synthesized. Stored attributes correspond to a field or flag in the entity
298 -- itself. Such attributes are identified in the table below by giving the
299 -- field or flag in the attribute that is used to hold the attribute value.
300 -- Synthesized attributes are not stored directly, but are rather computed as
301 -- needed from other attributes, or from information in the tree. These are
302 -- marked "synthesized" in the table below. The stored attributes have both
303 -- access functions and set procedures to set the corresponding values, while
304 -- synthesized attributes have only access functions.
306 -- Note: in the case of Node, Uint, or Elist fields, there are cases where
307 -- the same physical field is used for different purposes in different
308 -- entities, so these access functions should only be referenced for the
309 -- class of entities in which they are defined as being present. Flags are
310 -- not overlapped in this way, but nevertheless as a matter of style and
311 -- abstraction (which may or may not be checked by assertions in the body),
312 -- this restriction should be observed for flag fields as well.
314 -- Note: certain of the attributes on types apply only to base types, and
315 -- are so noted by the notation [base type only]. These are cases where the
316 -- attribute of any subtype is the same as the attribute of the base type.
317 -- The attribute can be referenced on a subtype (and automatically retrieves
318 -- the value from the base type). However, it is an error to try to set the
319 -- attribute on other than the base type, and if assertions are enabled,
320 -- an attempt to set the attribute on a subtype will raise an assert error.
322 -- Other attributes are noted as applying to the [implementation base type
323 -- only]. These are representation attributes which must always apply to a
324 -- full non-private type, and where the attributes are always on the full
325 -- type. The attribute can be referenced on a subtype (and automatically
326 -- retries the value from the implementation base type). However, it is an
327 -- error to try to set the attribute on other than the implementation base
328 -- type, and if assertions are enabled, an attempt to set the attribute on a
329 -- subtype will raise an assert error.
331 -- Accept_Address (Elist21)
332 -- Present in entries. If an accept has a statement sequence, then an
333 -- address variable is created, which is used to hold the address of the
334 -- parameters, as passed by the runtime. Accept_Address holds an element
335 -- list which represents a stack of entities for these address variables.
336 -- The current entry is the top of the stack, which is the last element
337 -- on the list. A stack is required to handle the case of nested select
338 -- statements referencing the same entry.
340 -- Access_Disp_Table (Elist16) [implementation base type only]
341 -- Present in record type entities. For a tagged type, points to the
342 -- dispatch tables associated with the tagged type. The first two
343 -- entities correspond with the primary dispatch table: 1) primary
344 -- dispatch table with user-defined primitives, 2) primary dispatch table
345 -- with predefined primitives. For each interface type covered by the
346 -- tagged type we also have: 3) secondary dispatch table with thunks of
347 -- primitives covering user-defined interface primitives, 4) secondary
348 -- dispatch table with thunks of predefined primitives, 5) secondary
349 -- dispatch table with user-defined primitives, and 6) secondary dispatch
350 -- table with predefined primitives. The last entity of this list is an
351 -- access type declaration used to expand dispatching calls through the
352 -- primary dispatch table. For a non-tagged record, contains Empty.
354 -- Actual_Subtype (Node17)
355 -- Present in variables, constants, and formal parameters. This is the
356 -- subtype imposed by the value of the object, as opposed to its nominal
357 -- subtype, which is imposed by the declaration. The actual subtype
358 -- differs from the nominal one when the latter is indefinite (as in the
359 -- case of an unconstrained formal parameter, or a variable declared
360 -- with an unconstrained type and an initial value). The nominal subtype
361 -- is the Etype entry for the entity. The Actual_Subtype field is set
362 -- only if the actual subtype differs from the nominal subtype. If the
363 -- actual and nominal subtypes are the same, then the Actual_Subtype
364 -- field is Empty, and Etype indicates both types.
366 -- For objects, the Actual_Subtype is set only if this is a discriminated
367 -- type. For arrays, the bounds of the expression are obtained and the
368 -- Etype of the object is directly the constrained subtype. This is
369 -- rather irregular, and the semantic checks that depend on the nominal
370 -- subtype being unconstrained use flag Is_Constr_Subt_For_U_Nominal(qv).
372 -- Address_Clause (synthesized)
373 -- Applies to entries, objects and subprograms. Set if an address clause
374 -- is present which references the object or subprogram and points to
375 -- the N_Attribute_Definition_Clause node. Empty if no Address clause.
376 -- The expression in the address clause is always a constant that is
377 -- defined before the entity to which the address clause applies.
378 -- Note: Gigi references this field in E_Task_Type entities???
380 -- Address_Taken (Flag104)
381 -- Present in all entities. Set if the Address or Unrestricted_Access
382 -- attribute is applied directly to the entity, i.e. the entity is the
383 -- entity of the prefix of the attribute reference. Used by Gigi to
384 -- make sure that the address can be meaningfully taken, and also in
385 -- the case of subprograms to control output of certain warnings.
387 -- Aft_Value (synthesized)
388 -- Applies to fixed and decimal types. Computes a universal integer
389 -- that holds value of the Aft attribute for the type.
392 -- Present in overloaded entities (literals, subprograms, entries) and
393 -- subprograms that cover a primitive operation of an abstract interface
394 -- (that is, subprograms with the Interface_Alias attribute). In case of
395 -- overloaded entities it points to the parent subprogram of a derived
396 -- subprogram. In case of abstract interface subprograms it points to the
397 -- subprogram that covers the abstract interface primitive. Also used for
398 -- a subprogram renaming, where it points to the renamed subprogram. For
399 -- an inherited operation (of a type extension) that is overridden in a
400 -- private part, the Alias is the overriding operation. In this fashion a
401 -- call from outside the package ends up executing the new body even if
402 -- non-dispatching, and a call from inside calls the overriding operation
403 -- because it hides the implicit one. Alias is always empty for entries.
405 -- Alignment (Uint14)
406 -- Present in entities for types and also in constants, variables
407 -- (including exceptions where it refers to the static data allocated for
408 -- an exception), loop parameters, and formal parameters. This indicates
409 -- the desired alignment for a type, or the actual alignment for an
410 -- object. A value of zero (Uint_0) indicates that the alignment has not
411 -- been set yet. The alignment can be set by an explicit alignment
412 -- clause, or set by the front-end in package Layout, or set by the
413 -- back-end as part of the back end back-annotation process. The
414 -- alignment field is also present in E_Exception entities, but there it
415 -- is used only by the back-end for back annotation.
417 -- Alignment_Clause (synthesized)
418 -- Applies to all entities for types and objects. If an alignment
419 -- attribute definition clause is present for the entity, then this
420 -- function returns the N_Attribute_Definition clause that specifies the
421 -- alignment. If no alignment clause applies to the type, then the call
422 -- to this function returns Empty. Note that the call can return a
423 -- non-Empty value even if Has_Alignment_Clause is not set (happens with
424 -- subtype and derived type declarations). Note also that a record
425 -- definition clause with an (obsolescent) mod clause is converted
426 -- into an attribute definition clause for this purpose.
428 -- Associated_Formal_Package (Node12)
429 -- Present in packages that are the actuals of formal_packages. Points
430 -- to the entity in the declaration for the formal package.
432 -- Associated_Node_For_Itype (Node8)
433 -- Present in all type and subtype entities. Set non-Empty only for
434 -- Itypes. Set to point to the associated node for the Itype, i.e.
435 -- the node whose elaboration generated the Itype. This is used for
436 -- copying trees, to determine whether or not to copy an Itype, and
437 -- also for accessibility checks on anonymous access types. This
438 -- node is typically an object declaration, component declaration,
439 -- type or subtype declaration. For an access discriminant in a type
440 -- declaration, the associated_node_for_itype is the discriminant
441 -- specification. For an access parameter it is the enclosing subprogram
444 -- Associated_Storage_Pool (Node22) [root type only]
445 -- Present in simple and general access type entities. References the
446 -- storage pool to be used for the corresponding collection. A value of
447 -- Empty means that the default pool is to be used. This is present
448 -- only in the root type, since derived types must have the same pool
449 -- as the parent type.
451 -- Associated_Final_Chain (Node23)
452 -- Present in simple and general access type entities. References the
453 -- List_Controller object that holds the finalization chain on which
454 -- are attached dynamically allocated objects referenced by the access
455 -- type. Empty when the access type cannot reference a controlled object.
457 -- Barrier_Function (Node12)
458 -- Present in protected entries and entry families. This is the
459 -- subprogram declaration for the body of the function that returns
460 -- the value of the entry barrier.
462 -- Base_Type (synthesized)
463 -- Applies to all type entities. Returns the base type of a type or
464 -- subtype. The base type of a type is the type itself. The base type
465 -- of a subtype is the type that it constrains (which is always a type
466 -- entity, not some other subtype). Note that in the case of a subtype
467 -- of a private type, it is possible for the base type attribute to
468 -- return a private type, even if the subtype to which it applies is
469 -- non-private. See also Implementation_Base_Type. Note: it is allowed
470 -- to apply Base_Type to other than a type, in which case it simply
471 -- returns the entity unchanged.
473 -- Block_Node (Node11)
474 -- Present in block entities. Points to the identifier in the
475 -- Block_Statement itself. Used when retrieving the block construct
476 -- for finalization purposes, The block entity has an implicit label
477 -- declaration in the enclosing declarative part, and has otherwise
478 -- no direct connection in the tree with the block statement. The
479 -- link is to the identifier (which is an occurrence of the entity)
480 -- and not to the block_statement itself, because the statement may
481 -- be rewritten, e.g. in the process of removing dead code.
483 -- Body_Entity (Node19)
484 -- Present in package and generic package entities, points to the
485 -- corresponding package body entity if one is present.
487 -- Body_Needed_For_SAL (Flag40)
488 -- Present in package and subprogram entities that are compilation
489 -- units. Indicates that the source for the body must be included
490 -- when the unit is part of a standalone library.
492 -- C_Pass_By_Copy (Flag125) [implementation base type only]
493 -- Present in record types. Set if a pragma Convention for the record
494 -- type specifies convention C_Pass_By_Copy. This convention name is
495 -- treated as identical in all respects to convention C, except that
496 -- if it is specified for a record type, then the C_Pass_By_Copy flag
497 -- is set, and if a foreign convention subprogram has a formal of the
498 -- corresponding type, then the parameter passing mechanism will be
499 -- set to By_Copy (unless specifically overridden by an Import or
502 -- Can_Never_Be_Null (Flag38)
503 -- This flag is present in all entities, but can only be set in an object
504 -- which can never have a null value. This is set True for constant
505 -- access values initialized to a non-null value. This is also True for
506 -- all access parameters in Ada 83 and Ada 95 modes, and for access
507 -- parameters that explicily exclude null in Ada 2005.
509 -- This is used to avoid unnecessary resetting of the Is_Known_Non_Null
510 -- flag for such entities. In Ada 2005 mode, this is also used when
511 -- determining subtype conformance of subprogram profiles to ensure
512 -- that two formals have the same null-exclusion status.
514 -- ??? This is also set on some access types, eg the Etype of the
515 -- anonymous access type of a controlling formal.
518 -- Present in all entities. This field contains an entry into the names
519 -- table that has the character string of the identifier, character
520 -- literal or operator symbol. See Namet for further details. Note that
521 -- throughout the processing of the front end, this name is the simple
522 -- unqualified name. However, just before gigi is called, a call is made
523 -- to Qualify_All_Entity_Names. This causes entity names to be qualified
524 -- using the encoding described in exp_dbug.ads, and from that point on
525 -- (including post gigi steps such as cross-reference generation), the
526 -- entities will contain the encoded qualified names.
528 -- Checks_May_Be_Suppressed (Flag31)
529 -- Present in all entities. Set if a pragma Suppress or Unsuppress
530 -- mentions the entity specifically in the second argument. If this
531 -- flag is set the Global_Entity_Suppress and Local_Entity_Suppress
532 -- tables must be consulted to determine if there actually is an active
533 -- Suppress or Unsuppress pragma that applies to the entity.
535 -- Class_Wide_Type (Node9)
536 -- Present in all type entities. For a tagged type or subtype, returns
537 -- the corresponding implicitly declared class-wide type. Set to Empty
538 -- for non-tagged types.
540 -- Cloned_Subtype (Node16)
541 -- Present in E_Record_Subtype and E_Class_Wide_Subtype entities.
542 -- Each such entity can either have a Discriminant_Constraint, in
543 -- which case it represents a distinct type from the base type (and
544 -- will have a list of components and discrimants in the list headed by
545 -- First_Entity) or else no such constraint, in which case it will be a
546 -- copy of the base type.
548 -- o Each element of the list in First_Entity is copied from the base
549 -- type; in that case, this field is Empty.
551 -- o The list in First_Entity is shared with the base type; in that
552 -- case, this field points to that entity.
554 -- A record or classwide subtype may also be a copy of some other
555 -- subtype and share the entities in the First_Entity with that subtype.
556 -- In that case, this field points to that subtype.
558 -- For E_Class_Wide_Subtype, the presence of Equivalent_Type overrides
559 -- this field. Note that this field ONLY appears in subtype entries, not
560 -- in type entries, it is not present, and it is an error to reference
561 -- Cloned_Subtype in an E_Record_Type or E_Class_Wide_Type entity.
564 -- This flag appears on all nodes, including entities, and indicates
565 -- that the node was created by the scanner or parser from the original
566 -- source. Thus for entities, it indicates that the entity is defined
567 -- in the original source program.
569 -- Component_Alignment (special field) [base type only]
570 -- Present in array and record entities. Contains a value of type
571 -- Component_Alignment_Kind indicating the alignment of components.
572 -- Set to Calign_Default normally, but can be overridden by use of
573 -- the Component_Alignment pragma. Note: this field is currently
574 -- stored in a non-standard way, see body for details.
576 -- Component_Bit_Offset (Uint11)
577 -- Present in record components (E_Component, E_Discriminant) if a
578 -- component clause applies to the component. First bit position of
579 -- given component, computed from the first bit and position values
580 -- given in the component clause. A value of No_Uint means that the
581 -- value is not yet known. The value can be set by the appearance of
582 -- an explicit component clause in a record representation clause,
583 -- or it can be set by the front-end in package Layout, or it can be
584 -- set by the backend. By the time backend processing is completed,
585 -- this field is always set. A negative value is used to represent
586 -- a value which is not known at compile time, and must be computed
587 -- at run-time (this happens if fields of a record have variable
588 -- lengths). See package Layout for details of these values.
590 -- Note: Component_Bit_Offset is redundant with respect to the fields
591 -- Normalized_First_Bit and Normalized_Position, and could in principle
592 -- be eliminated, but it is convenient in several situations, including
593 -- use in Gigi, to have this redundant field.
595 -- Component_Clause (Node13)
596 -- Present in record components and discriminants. If a record
597 -- representation clause is present for the corresponding record type a
598 -- that specifies a position for the component, then the Component_Clause
599 -- field of the E_Component entity points to the N_Component_Clause node.
600 -- Set to Empty if no record representation clause was present, or if
601 -- there was no specification for this component.
603 -- Component_Size (Uint22) [implementation base type only]
604 -- Present in array types. It contains the component size value for
605 -- the array. A value of No_Uint means that the value is not yet set.
606 -- The value can be set by the use of a component size clause, or
607 -- by the front end in package Layout, or by the backend. A negative
608 -- value is used to represent a value which is not known at compile
609 -- time, and must be computed at run-time (this happens if the type
610 -- of the component has a variable length size). See package Layout
611 -- for details of these values.
613 -- Component_Type (Node20) [implementation base type only]
614 -- Present in array types and string types. References component type.
616 -- Corresponding_Concurrent_Type (Node18)
617 -- Present in record types that are constructed by the expander to
618 -- represent task and protected types (Is_Concurrent_Record_Type flag
619 -- set True). Points to the entity for the corresponding task type or
622 -- Corresponding_Discriminant (Node19)
623 -- Present in discriminants of a derived type, when the discriminant is
624 -- used to constrain a discriminant of the parent type. Points to the
625 -- corresponding discriminant in the parent type. Otherwise it is Empty.
627 -- Corresponding_Equality (Node13)
628 -- Present in function entities for implicit inequality operators.
629 -- Denotes the explicit or derived equality operation that creates
630 -- the implicit inequality. Note that this field is not present in
631 -- other function entities, only in implicit inequality routines,
632 -- where Comes_From_Source is always False.
634 -- Corresponding_Protected_Entry (Node18)
635 -- Present in subrogram bodies. Set for subprogram bodies that implement
636 -- a protected type entry to point to the entity for the entry.
638 -- Corresponding_Record_Type (Node18)
639 -- Present in protected and task types and subtypes. References the
640 -- entity for the corresponding record type constructed by the expander
641 -- (see Exp_Ch9). This type is used to represent values of the task type.
643 -- Corresponding_Remote_Type (Node22)
644 -- Present in record types that describe the fat pointer structure for
645 -- Remote_Access_To_Subrogram types. References the original access type.
647 -- CR_Discriminant (Node23)
648 -- Present in discriminants of concurrent types. Denotes the homologous
649 -- discriminant of the corresponding record type. The CR_Discriminant is
650 -- created at the same time as the discriminal, and used to replace
651 -- occurrences of the discriminant within the type declaration.
653 -- Current_Use_Clause (Node27)
654 -- Present in packages and in types. For packages, denotes the use
655 -- package clause currently in scope that makes the package use_visible.
656 -- For types, it denotes the use_type clause that makes the operators of
657 -- the type visible. Used for more precise warning messages on redundant
660 -- Current_Value (Node9)
661 -- Present in all object entities. Set in E_Variable, E_Constant, formal
662 -- parameters and E_Loop_Parameter entities if we have trackable current
663 -- values. Set non-Empty if the (constant) current value of the variable
664 -- is known, This value is valid only for references from the same
665 -- sequential scope as the entity. The sequential scope of an entity
666 -- includes the immediate scope and any contained scopes that are package
667 -- specs, package bodies, blocks (at any nesting level) or statement
668 -- sequences in IF or loop statements.
670 -- Another related use of this field is to record information about the
671 -- value obtained from an IF or WHILE statement condition. If the IF or
672 -- ELSIF or WHILE condition has the form "NOT {,NOT] OBJ RELOP VAL ",
673 -- or OBJ [AND [THEN]] expr, where OBJ refers to an entity with a
674 -- Current_Value field, RELOP is one of the six relational operators, and
675 -- VAL is a compile-time known value then the Current_Value field of OBJ
676 -- points to the N_If_Statement, N_Elsif_Part, or N_Iteration_Scheme node
677 -- of the relevant construct, and the Condition field of this can be
678 -- consulted to give information about the value of OBJ. For more details
679 -- on this usage, see the procedure Exp_Util.Get_Current_Value_Condition.
681 -- Debug_Info_Off (Flag166)
682 -- Present in all entities. Set if a pragma Suppress_Debug_Info applies
683 -- to the entity, or if internal processing in the compiler determines
684 -- that suppression of debug information is desirable. Note that this
685 -- flag is only for use by the front end as part of the processing for
686 -- determining if Needs_Debug_Info should be set. The back end should
687 -- always test Needs_Debug_Info, it should never test Debug_Info_Off.
689 -- Debug_Renaming_Link (Node25)
690 -- Used to link the variable associated with a debug renaming declaration
691 -- to the renamed entity. See Exp_Dbug.Debug_Renaming_Declaration for
692 -- details of the use of this field.
694 -- Declaration_Node (synthesized)
695 -- Applies to all entities. Returns the tree node for the construct that
696 -- declared the entity. Normally this is just the Parent of the entity.
697 -- One exception arises with child units, where the parent of the entity
698 -- is a selected component/defining program unit name. Another exception
699 -- is that if the entity is an incomplete type that has been completed,
700 -- then we obtain the declaration node denoted by the full type, i.e. the
701 -- full type declaration node. Also note that for subprograms, this
702 -- returns the {function,procedure}_specification, not the subprogram_
705 -- Default_Expr_Function (Node21)
706 -- Present in parameters. It holds the entity of the parameterless
707 -- function that is built to evaluate the default expression if it is
708 -- more complex than a simple identifier or literal. For the latter
709 -- simple cases or if there is no default value, this field is Empty.
711 -- Default_Expressions_Processed (Flag108)
712 -- A flag in subprograms (functions, operators, procedures) and in
713 -- entries and entry families used to indicate that default expressions
714 -- have been processed and to avoid multiple calls to process the
715 -- default expressions (see Freeze.Process_Default_Expressions), which
716 -- would not only waste time, but also generate false error messages.
718 -- Default_Value (Node20)
719 -- Present in formal parameters. Points to the node representing the
720 -- expression for the default value for the parameter. Empty if the
721 -- parameter has no default value (which is always the case for OUT
722 -- and IN OUT parameters in the absence of errors).
724 -- Delay_Cleanups (Flag114)
725 -- Present in entities that have finalization lists (subprograms
726 -- blocks, and tasks). Set if there are pending generic body
727 -- instantiations for the corresponding entity. If this flag is
728 -- set, then generation of cleanup actions for the corresponding
729 -- entity must be delayed, since the insertion of the generic body
730 -- may affect cleanup generation (see Inline for further details).
732 -- Delay_Subprogram_Descriptors (Flag50)
733 -- Present in entities for which exception subprogram descriptors
734 -- are generated (subprograms, package declarations and package
735 -- bodies). Present if there are pending generic body instantiations
736 -- for the corresponding entity. If this flag is set, then generation
737 -- of the subprogram descriptor for the corresponding enities must
738 -- be delayed, since the insertion of the generic body may add entries
739 -- to the list of handlers.
741 -- Note: for subprograms, Delay_Subprogram_Descriptors is set if and
742 -- only if Delay_Cleanups is set. But Delay_Cleanups can be set for a
743 -- a block (in which case Delay_Subprogram_Descriptors is set for the
744 -- containing subprogram). In addition Delay_Subprogram_Descriptors is
745 -- set for a library level package declaration or body which contains
746 -- delayed instantiations (in this case the descriptor refers to the
747 -- enclosing elaboration procedure).
749 -- Delta_Value (Ureal18)
750 -- Present in fixed and decimal types. Points to a universal real
751 -- that holds value of delta for the type, as given in the declaration
752 -- or as inherited by a subtype or derived type.
754 -- Dependent_Instances (Elist8)
755 -- Present in packages that are instances. Holds list of instances
756 -- of inner generics. Used to place freeze nodes for those instances
757 -- after that of the current one, i.e. after the corresponding generic
760 -- Depends_On_Private (Flag14)
761 -- Present in all type entities. Set if the type is private or if it
762 -- depends on a private type.
764 -- Designated_Type (synthesized)
765 -- Applies to access types. Returns the designated type. Differs
766 -- from Directly_Designated_Type in that if the access type refers
767 -- to an incomplete type, and the full type is available, then this
768 -- full type is returned instead of the incomplete type.
770 -- Digits_Value (Uint17)
771 -- Present in floating point types and subtypes and decimal types and
772 -- subtypes. Contains the Digits value specified in the declaration.
774 -- Direct_Primitive_Operations (Elist10)
775 -- Present in tagged types and subtypes (including synchronized types),
776 -- in tagged private types and in tagged incomplete types. Element list
777 -- of entities for primitive operations of the tagged type. Not present
778 -- in untagged types. In order to follow the C++ ABI, entities of
779 -- primitives that come from source must be stored in this list in the
780 -- order of their occurrence in the sources. For incomplete types the
781 -- list is always empty.
783 -- Directly_Designated_Type (Node20)
784 -- Present in access types. This field points to the type that is
785 -- directly designated by the access type. In the case of an access
786 -- type to an incomplete type, this field references the incomplete
787 -- type. Note that in the semantic processing, what is useful in
788 -- nearly all cases is the full type designated by the access type.
789 -- The function Designated_Type obtains this full type in the case of
790 -- access to an incomplete type.
792 -- Discard_Names (Flag88)
793 -- Present in types and exception entities. Set if pragma Discard_Names
794 -- applies to the entity. It is also set for declarative regions and
795 -- package specs for which a Discard_Names pragma with zero arguments
796 -- has been encountered. The purpose of setting this flag is to be able
797 -- to set the Discard_Names attribute on enumeration types declared
798 -- after the pragma within the same declarative region. This flag is
799 -- set to False if a Keep_Names pragma appears for an enumeration type.
801 -- Discriminal (Node17)
802 -- Present in discriminants (Discriminant formal: GNAT's first
803 -- coinage). The entity used as a formal parameter that corresponds
804 -- to a discriminant. See section "Handling of Discriminants" for
805 -- full details of the use of discriminals.
807 -- Discriminal_Link (Node10)
808 -- Present in discriminals (which have an Ekind of E_In_Parameter,
809 -- or E_Constant), points back to corresponding discriminant.
811 -- Discriminant_Checking_Func (Node20)
812 -- Present in components. Points to the defining identifier of the
813 -- function built by the expander returns a Boolean indicating whether
814 -- the given record component exists for the current discriminant
817 -- Discriminant_Constraint (Elist21)
818 -- Present in entities whose Has_Discriminants flag is set (concurrent
819 -- types, subtypes, record types and subtypes, private types and
820 -- subtypes, limited private types and subtypes and incomplete types).
821 -- It is an error to reference the Discriminant_Constraint field if
822 -- Has_Discriminants is False.
824 -- If the Is_Constrained flag is set, Discriminant_Constraint points
825 -- to an element list containing the discriminant constraints in the
826 -- same order in which the discriminants are declared.
828 -- If the Is_Constrained flag is not set but the discriminants of the
829 -- unconstrained type have default initial values then this field
830 -- points to an element list giving these default initial values in
831 -- the same order in which the discriminants are declared. Note that
832 -- in this case the entity cannot be a tagged record type, because
833 -- discriminants in this case cannot have defaults.
835 -- If the entity is a tagged record implicit type, then this field is
836 -- inherited from the first subtype (so that the itype is subtype
837 -- conformant with its first subtype, which is needed when the first
838 -- subtype overrides primitive operations inherited by the implicit
841 -- In all other cases Discriminant_Constraint contains the empty
842 -- Elist (ie it is initialized with a call to New_Elmt_List).
844 -- Discriminant_Default_Value (Node20)
845 -- Present in discriminants. Points to the node representing the
846 -- expression for the default value of the discriminant. Set to
847 -- Empty if the discriminant has no default value.
849 -- Discriminant_Number (Uint15)
850 -- Present in discriminants. Gives the ranking of a discriminant in
851 -- the list of discriminants of the type, i.e. a sequential integer
852 -- index starting at 1 and ranging up to number of discriminants.
854 -- Dispatch_Table_Wrappers (Elist26) [implementation base type only]
855 -- Present in record type [with private] entities. Set in library level
856 -- record type entities if we are generating statically allocated
857 -- dispatch tables. For a tagged type, points to the list of dispatch
858 -- table wrappers associated with the tagged type. For a non-tagged
859 -- record, contains No_Elist.
861 -- DTC_Entity (Node16)
862 -- Present in function and procedure entities. Set to Empty unless
863 -- the subprogram is dispatching in which case it references the
864 -- Dispatch Table pointer Component. That is to say the component _tag
865 -- for regular Ada tagged types, for CPP_Class types and their
866 -- descendants this field points to the component entity in the record
867 -- that is the Vtable pointer for the Vtable containing the entry that
868 -- references the subprogram.
870 -- DT_Entry_Count (Uint15)
871 -- Present in E_Component entities. Only used for component marked
872 -- Is_Tag. Store the number of entries in the Vtable (or Dispatch Table)
874 -- DT_Offset_To_Top_Func (Node25)
875 -- Present in E_Component entities. Only used for component marked
876 -- Is_Tag. If present it stores the Offset_To_Top function used to
877 -- provide this value in tagged types whose ancestor has discriminants.
879 -- DT_Position (Uint15)
880 -- Present in function and procedure entities which are dispatching
881 -- (should not be referenced without first checking that flag
882 -- Is_Dispatching_Operation is True). Contains the offset into
883 -- the Vtable for the entry that references the subprogram.
886 -- Present in all entities. Contains a value of the enumeration type
887 -- Entity_Kind declared in a subsequent section in this spec.
889 -- Elaborate_Body_Desirable (Flag210)
890 -- Present in package entities. Set if the elaboration circuitry detects
891 -- a case where there is a package body that modifies one or more visible
892 -- entities in the package spec and there is no explicit Elaborate_Body
893 -- pragma for the package. This information is passed on to the binder,
894 -- which attempts, but does not promise, to elaborate the body as close
895 -- to the spec as possible.
897 -- Elaboration_Entity (Node13)
898 -- Present in generic and non-generic package and subprogram
899 -- entities. This is a boolean entity associated with the unit that
900 -- is initially set to False, and is set True when the unit is
901 -- elaborated. This is used for two purposes. First, it is used to
902 -- implement required access before elaboration checks (the flag
903 -- must be true to call a subprogram at elaboration time). Second,
904 -- it is used to guard against repeated execution of the generated
907 -- Note that we always allocate this flag, and set this field, but
908 -- we do not always actually use it. It is only used if it is needed
909 -- for access-before-elaboration use (see Elaboration_Entity_Required
910 -- flag) or if either the spec or the body has elaboration code. If
911 -- neither of these two conditions holds, then the entity is still
912 -- allocated (since we don't know early enough whether or not there
913 -- is elaboration code), but is simply not used for any purpose.
915 -- Elaboration_Entity_Required (Flag174)
916 -- Present in generics and non-generic package and subprogram
917 -- entities. Set only if Elaboration_Entity is non-Empty to indicate
918 -- that the boolean is required to be set even if there is no other
919 -- elaboration code. This occurs when the Elaboration_Entity flag
920 -- is used for required access-before-elaboration checking. If the
921 -- flag is only for preventing multiple execution of the elaboration
922 -- code, then if there is no other elaboration code, obviously there
923 -- is no need to set the flag.
925 -- Enclosing_Scope (Node18)
926 -- Present in labels. Denotes the innermost enclosing construct that
927 -- contains the label. Identical to the scope of the label, except for
928 -- labels declared in the body of an accept statement, in which case the
929 -- entry_name is the Enclosing_Scope. Used to validate goto's within
930 -- accept statements.
932 -- Entry_Accepted (Flag152)
933 -- Present in E_Entry and E_Entry_Family entities. Set if there is
934 -- at least one accept for this entry in the task body. Used to
935 -- generate warnings for missing accepts.
937 -- Entry_Bodies_Array (Node15)
938 -- Present in protected types for which Has_Entries is true.
939 -- This is the defining identifier for the array of entry body
940 -- action procedures and barrier functions used by the runtime to
941 -- execute the user code associated with each entry.
943 -- Entry_Cancel_Parameter (Node23)
944 -- Present in blocks. This only applies to a block statement for
945 -- which the Is_Asynchronous_Call_Block flag is set. It
946 -- contains the defining identifier of an object that must be
947 -- passed to the Cancel_Task_Entry_Call or Cancel_Protected_Entry_Call
948 -- call in the cleanup handler added to the block by
949 -- Exp_Ch7.Expand_Cleanup_Actions. This parameter is a Boolean
950 -- object for task entry calls and a Communications_Block object
951 -- in the case of protected entry calls. In both cases the objects
952 -- are declared in outer scopes to this block.
954 -- Entry_Component (Node11)
955 -- Present in formal parameters (in, in out and out parameters). Used
956 -- only for formals of entries. References the corresponding component
957 -- of the entry parameter record for the entry.
959 -- Entry_Formal (Node16)
960 -- Present in components of the record built to correspond to entry
961 -- parameters. This field points from the component to the formal. It
962 -- is the back pointer corresponding to Entry_Component.
964 -- Entry_Index_Constant (Node18)
965 -- Present in an entry index parameter. This is an identifier that
966 -- eventually becomes the name of a constant representing the index
967 -- of the entry family member whose entry body is being executed. Used
968 -- to expand references to the entry index specification identifier.
970 -- Entry_Index_Type (synthesized)
971 -- Applies to an entry family. Denotes Etype of the subtype indication
972 -- in the entry declaration. Used to resolve the index expression in an
973 -- accept statement for a member of the family, and in the prefix of
974 -- 'COUNT when it applies to a family member.
976 -- Entry_Parameters_Type (Node15)
977 -- Present in entries. Points to the access-to-record type that is
978 -- constructed by the expander to hold a reference to the parameter
979 -- values. This reference is manipulated (as an address) by the
980 -- tasking runtime. The designated record represents a packaging
981 -- up of the entry parameters (see Exp_Ch9.Expand_N_Entry_Declaration
982 -- for further details). Entry_Parameters_Type is Empty if the entry
983 -- has no parameters.
985 -- Enumeration_Pos (Uint11)
986 -- Present in enumeration literals. Contains the position number
987 -- corresponding to the value of the enumeration literal.
989 -- Enumeration_Rep (Uint12)
990 -- Present in enumeration literals. Contains the representation that
991 -- corresponds to the value of the enumeration literal. Note that
992 -- this is normally the same as Enumeration_Pos except in the presence
993 -- of representation clauses, where Pos will still represent the
994 -- position of the literal within the type and Rep will have be the
995 -- value given in the representation clause.
997 -- Enumeration_Rep_Expr (Node22)
998 -- Present in enumeration literals. Points to the expression in an
999 -- associated enumeration rep clause that provides the representation
1000 -- value for this literal. Empty if no enumeration rep clause for this
1001 -- literal (or if rep clause does not have an entry for this literal,
1002 -- an error situation). This is also used to catch duplicate entries
1003 -- for the same literal.
1005 -- Enum_Pos_To_Rep (Node23)
1006 -- Present in enumeration types (but not enumeration subtypes). Set to
1007 -- Empty unless the enumeration type has a non-standard representation
1008 -- (i.e. at least one literal has a representation value different from
1009 -- its pos value). In this case, Enum_Pos_To_Rep is the entity for an
1010 -- array constructed when the type is frozen that maps Pos values to
1011 -- corresponding Rep values. The index type of this array is Natural,
1012 -- and the component type is a suitable integer type that holds the
1013 -- full range of representation values.
1015 -- Equivalent_Type (Node18)
1016 -- Present in class wide types and subtypes, access to protected
1017 -- subprogram types, and in exception types. For a classwide type, it
1018 -- is always Empty. For a class wide subtype, it points to an entity
1019 -- created by the expander which gives Gigi an easily understandable
1020 -- equivalent of the class subtype with a known size (given by an
1021 -- initial value). See Exp_Util.Expand_Class_Wide_Subtype for further
1022 -- details. For E_Exception_Type, this points to the record containing
1023 -- the data necessary to represent exceptions (for further details, see
1024 -- System.Standard_Library. For access_to_protected subprograms, it
1025 -- denotes a record that holds pointers to the operation and to the
1026 -- protected object. For remote Access_To_Subprogram types, it denotes
1027 -- the record that is the fat pointer representation of an RAST.
1030 -- Present in all types and subtypes, and also for components, constants,
1031 -- and variables, including exceptions where it refers to the static data
1032 -- allocated for an exception. Contains the Object_Size of the type or of
1033 -- the object. A value of zero indicates that the value is not yet known.
1035 -- For the case of components where a component clause is present, the
1036 -- value is the value from the component clause, which must be non-
1037 -- negative (but may be zero, which is acceptable for the case of
1038 -- a type with only one possible value). It is also possible for Esize
1039 -- of a component to be set without a component clause present, which
1040 -- means that the component size is specified, but not the position.
1041 -- See also RM_Size and the section on "Handling of Type'Size Values".
1042 -- During gigi processing, the value is back annotated for all zero
1043 -- values, so that after the call to gigi, the value is properly set.
1046 -- Present in all entities. Represents the type of the entity, which
1047 -- is itself another entity. For a type entity, points to the parent
1048 -- type for a derived type, or if the type is not derived, points to
1049 -- itself. For a subtype entity, Etype points to the base type. For
1050 -- a class wide type, points to the parent type. For a subprogram or
1051 -- subprogram type, Etype has the return type of a function or is set
1052 -- to Standard_Void_Type to represent a procedure.
1054 -- Note one obscure case: for pragma Default_Storage_Pool (null), the
1055 -- Etype of the N_Null node is Empty.
1057 -- Exception_Code (Uint22)
1058 -- Present in exception entitites. Set to zero unless either an
1059 -- Import_Exception or Export_Exception pragma applies to the
1060 -- pragma and specifies a Code value. See description of these
1061 -- pragmas for details. Note that this field is relevant only if
1062 -- Is_VMS_Exception is set.
1064 -- Extra_Formal (Node15)
1065 -- Present in formal parameters in the non-generic case. Certain
1066 -- parameters require extra implicit information to be passed (e.g. the
1067 -- flag indicating if an unconstrained variant record argument is
1068 -- constrained, and the accessibility level for access parameters. See
1069 -- description of Extra_Constrained, Extra_Accessibility fields for
1070 -- further details. Extra formal parameters are constructed to represent
1071 -- these values, and chained to the end of the list of formals using the
1072 -- Extra_Formal field (i.e. the Extra_Formal field of the last "real"
1073 -- formal points to the first extra formal, and the Extra_Formal field of
1074 -- each extra formal points to the next one, with Empty indicating the
1075 -- end of the list of extra formals.
1077 -- Extra_Formals (Node28)
1078 -- Applies to subprograms and subprogram types, and also in entries
1079 -- and entry families. Returns first extra formal of the subprogram
1080 -- or entry. Returns Empty if there are no extra formals.
1082 -- Extra_Accessibility (Node13)
1083 -- Present in formal parameters in the non-generic case if expansion is
1084 -- active. Normally Empty, but if a parameter is one for which a dynamic
1085 -- accessibility check is required, then an extra formal of type
1086 -- Natural is created (see description of field Extra_Formal), and the
1087 -- Extra_Accessibility field of the formal parameter points to the entity
1088 -- for this extra formal. Also present in variables when compiling
1089 -- receiving stubs. In this case, a non Empty value means that this
1090 -- variable's accessibility depth has been transmitted by the caller and
1091 -- must be retrieved through the entity designed by this field instead of
1094 -- Extra_Constrained (Node23)
1095 -- Present in formal parameters in the non-generic case if expansion is
1096 -- active. Normally Empty, but if a parameter is one for which a dynamic
1097 -- indication of its constrained status is required, then an extra formal
1098 -- of type Boolean is created (see description of field Extra_Formal),
1099 -- and the Extra_Constrained field of the formal parameter points to the
1100 -- entity for this extra formal. Also present in variables when compiling
1101 -- receiving stubs. In this case, a non empty value means that this
1102 -- variable's constrained status has been transmitted by the caller and
1103 -- must be retrieved through the entity designed by this field instead of
1106 -- Can_Use_Internal_Rep (Flag229) [base type only]
1107 -- Present in Access_Subprogram_Kind nodes. This flag is set by the
1108 -- front end and used by the back end. False means that the back end
1109 -- must represent the type in the same way as Convention-C types (and
1110 -- other foreign-convention types). On many targets, this means that
1111 -- the back end will use dynamically generated trampolines for nested
1112 -- subprograms. True means that the back end can represent the type in
1113 -- some internal way. On the aforementioned targets, this means that the
1114 -- back end will not use dynamically generated trampolines. This flag
1115 -- must be False if Has_Foreign_Convention is True; otherwise, the front
1116 -- end is free to set the policy.
1118 -- Setting this False in all cases corresponds to the traditional back
1119 -- end strategy, where all access-to-subprogram types are represented the
1120 -- same way, independent of the Convention. See also
1121 -- Always_Compatible_Rep in Targparm.
1123 -- Efficiency note: On targets that use dynamically generated
1124 -- trampolines, False generally favors efficiency of top-level
1125 -- subprograms, whereas True generally favors efficiency of nested
1126 -- ones. On other targets, this flag has little or no effect on
1127 -- efficiency. The front end should take this into account. In
1128 -- particular, pragma Favor_Top_Level gives a hint that the flag should
1131 -- Note: We considered using Convention-C for this purpose, but we need
1132 -- this separate flag, because Convention-C implies that for
1133 -- P'[Unrestricted_]Access, P also have convention C. Sometimes we want
1134 -- to have Can_Use_Internal_Rep False for an access type, but allow P to
1135 -- have convention Ada.
1137 -- Finalization_Chain_Entity (Node19)
1138 -- Present in scopes that can have finalizable entities (blocks,
1139 -- functions, procedures, tasks, entries, return statements). When this
1140 -- field is empty it means that there are no finalization actions to
1141 -- perform on exit of the scope. When this field contains 'Error', it
1142 -- means that no finalization actions should happen at this level and
1143 -- the finalization chain of a parent scope shall be used (??? this is
1144 -- an improper use of 'Error' and should be changed). Otherwise it
1145 -- contains an entity of type Finalizable_Ptr that is the head of the
1146 -- list of objects to finalize on exit. See "Finalization Management"
1147 -- section in exp_ch7.adb for more details.
1149 -- Finalize_Storage_Only (Flag158) [base type only]
1150 -- Present in all types. Set on direct controlled types to which a
1151 -- valid Finalize_Storage_Only pragma applies. This flag is also set on
1152 -- composite types when they have at least one controlled component and
1153 -- all their controlled components are Finalize_Storage_Only. It is also
1154 -- inherited by type derivation except for direct controlled types where
1155 -- the Finalize_Storage_Only pragma is required at each level of
1158 -- First_Component (synthesized)
1159 -- Applies to record types. Returns the first component by following the
1160 -- chain of declared entities for the record until a component is found
1161 -- (one with an Ekind of E_Component). The discriminants are skipped. If
1162 -- the record is null, then Empty is returned.
1164 -- First_Component_Or_Discriminant (synthesized)
1165 -- Similar to First_Component, but discriminants are not skipped, so will
1166 -- find the first discriminant if discriminants are present.
1168 -- First_Entity (Node17)
1169 -- Present in all entities which act as scopes to which a list of
1170 -- associated entities is attached (blocks, class subtypes and types,
1171 -- entries, functions, loops, packages, procedures, protected objects,
1172 -- record types and subtypes, private types, task types and subtypes).
1173 -- Points to a list of associated entities using the Next_Entity field
1174 -- as a chain pointer with Empty marking the end of the list.
1176 -- First_Exit_Statement (Node8)
1177 -- Present in E_Loop entity. The exit statements for a loop are chained
1178 -- (in reverse order of appearence) using this field to point to the
1179 -- first entry in the chain (last exit statement in the loop). The
1180 -- entries are chained through the Next_Exit_Statement field of the
1181 -- N_Exit_Statement node with Empty marking the end of the list.
1183 -- First_Formal (synthesized)
1184 -- Applies to subprograms and subprogram types, and also in entries
1185 -- and entry families. Returns first formal of the subprogram or entry.
1186 -- The formals are the first entities declared in a subprogram or in
1187 -- a subprogram type (the designated type of an Access_To_Subprogram
1188 -- definition) or in an entry.
1190 -- First_Formal_With_Extras (synthesized)
1191 -- Applies to subprograms and subprogram types, and also in entries
1192 -- and entry families. Returns first formal of the subprogram or entry.
1193 -- Returns Empty if there are no formals. The list returned includes
1194 -- all the extra formals (see description of Extra_Formals field).
1196 -- First_Index (Node17)
1197 -- Present in array types and subtypes and in string types and subtypes.
1198 -- By introducing implicit subtypes for the index constraints, we have
1199 -- the same structure for constrained and unconstrained arrays, subtype
1200 -- marks and discrete ranges are both represented by a subtype. This
1201 -- function returns the tree node corresponding to an occurrence of the
1202 -- first index (NOT the entity for the type). Subsequent indexes are
1203 -- obtained using Next_Index. Note that this field is present for the
1204 -- case of string literal subtypes, but is always Empty.
1206 -- First_Literal (Node17)
1207 -- Present in all enumeration types, including character and boolean
1208 -- types. This field points to the first enumeration literal entity
1209 -- for the type (i.e. it is set to First (Literals (N)) where N is
1210 -- the enumeration type definition node. A special case occurs with
1211 -- standard character and wide character types, where this field is
1212 -- Empty, since there are no enumeration literal lists in these cases.
1213 -- Note that this field is set in enumeration subtypes, but it still
1214 -- points to the first literal of the base type in this case.
1216 -- First_Optional_Parameter (Node14)
1217 -- Present in (non-generic) function and procedure entities. Set to a
1218 -- non-null value only if a pragma Import_Function, Import_Procedure
1219 -- or Import_Valued_Procedure specifies a First_Optional_Parameter
1220 -- argument, in which case this field points to the parameter entity
1221 -- corresponding to the specified parameter.
1223 -- First_Private_Entity (Node16)
1224 -- Present in all entities containing private parts (packages, protected
1225 -- types and subtypes, task types and subtypes). The entities on the
1226 -- entity chain are in order of declaration, so the entries for private
1227 -- entities are at the end of the chain. This field points to the first
1228 -- entity for the private part. It is Empty if there are no entities
1229 -- declared in the private part or if there is no private part.
1231 -- First_Rep_Item (Node6)
1232 -- Present in all entities. If non-empty, points to a linked list of
1233 -- representation pragmas nodes and representation clause nodes that
1234 -- apply to the entity, linked using Next_Rep_Item, with Empty marking
1235 -- the end of the list. In the case of derived types and subtypes, the
1236 -- new entity inherits the chain at the point of declaration. This
1237 -- means that it is possible to have multiple instances of the same
1238 -- kind of rep item on the chain, in which case it is the first one
1239 -- that applies to the entity.
1241 -- Note: pragmas that can apply to more than one overloadable entity,
1242 -- (Convention, Interface, Inline, Inline_Always, Import, Export,
1243 -- External) are never present on this chain when they apply to
1244 -- overloadable entities, since it is impossible for a given pragma
1245 -- to be on more than one chain at a time.
1247 -- For most representation items, the representation information is
1248 -- reflected in other fields and flags in the entity. For example if a
1249 -- record representation clause is present, the component entities
1250 -- reflect the specified information. However, there are some items that
1251 -- are only reflected in the chain. These include:
1253 -- Alignment attribute definition clause
1254 -- Machine_Attribute pragma
1255 -- Link_Alias pragma
1256 -- Linker_Section pragma
1257 -- Weak_External pragma
1259 -- If any of these items are present, then the flag Has_Gigi_Rep_Item
1260 -- is set, indicating that Gigi should search the chain.
1262 -- Other representation items are included in the chain so that error
1263 -- messages can easily locate the relevant nodes for posting errors.
1264 -- Note in particular that size clauses are present only for this
1265 -- purpose, and should only be accessed if Has_Size_Clause is set.
1267 -- Freeze_Node (Node7)
1268 -- Present in all entities. If there is an associated freeze node for
1269 -- the entity, this field references this freeze node. If no freeze
1270 -- node is associated with the entity, then this field is Empty. See
1271 -- package Freeze for further details.
1273 -- From_With_Type (Flag159)
1274 -- Present in package and type entities. Indicates that the entity
1275 -- appears in a With_Type clause in the context of some other unit,
1276 -- either as the prefix (which must be a package), or as a type name.
1277 -- The package can only be used to retrieve such a type, and the type
1278 -- can be used only in component declarations and access definitions.
1279 -- The With_Type clause is used to construct mutually recursive
1280 -- types, i.e. record types (Java classes) that hold pointers to each
1281 -- other. If such a type is an access type, it has no explicit freeze
1282 -- node, so that the back-end does not attempt to elaborate it.
1283 -- Currently this flag is also used to implement Ada 2005 (AI-50217).
1284 -- It will be renamed to From_Limited_With after removal of the current
1285 -- GNAT with_type clause???
1287 -- Full_View (Node11)
1288 -- Present in all type and subtype entities and in deferred constants.
1289 -- References the entity for the corresponding full type declaration.
1290 -- For all types other than private and incomplete types, this field
1291 -- always contains Empty. If an incomplete type E1 is completed by a
1292 -- private type E2 whose full type declaration entity is E3 then the
1293 -- full view of E1 is E2, and the full view of E2 is E3. See also
1296 -- Generic_Homonym (Node11)
1297 -- Present in generic packages. The generic homonym is the entity of
1298 -- a renaming declaration inserted in every generic unit. It is used
1299 -- to resolve the name of a local entity that is given by a qualified
1300 -- name, when the generic entity itself is hidden by a local name.
1302 -- Generic_Renamings (Elist23)
1303 -- Present in package and subprogram instances. Holds mapping that
1304 -- associates generic parameters with the corresponding instances, in
1305 -- those cases where the instance is an entity.
1307 -- Handler_Records (List10)
1308 -- Present in subprogram and package entities. Points to a list of
1309 -- identifiers referencing the handler record entities for the
1310 -- corresponding unit.
1312 -- Has_Aliased_Components (Flag135) [implementation base type only]
1313 -- Present in array type entities. Indicates that the component type
1314 -- of the array is aliased.
1316 -- Has_Alignment_Clause (Flag46)
1317 -- Present in all type entities and objects. Indicates if an alignment
1318 -- clause has been given for the entity. If set, then Alignment_Clause
1319 -- returns the N_Attribute_Definition node for the alignment attribute
1320 -- definition clause. Note that it is possible for this flag to be False
1321 -- even when Alignment_Clause returns non_Empty (this happens in the case
1322 -- of derived type declarations).
1324 -- Has_All_Calls_Remote (Flag79)
1325 -- Present in all library unit entities. Set true if the library unit
1326 -- has an All_Calls_Remote pragma. Note that such entities must also
1327 -- be RCI entities, so the flag Is_Remote_Call_Interface will always
1328 -- be set if this flag is set.
1330 -- Has_Anon_Block_Suffix (Flag201)
1331 -- Present in all entities. Set if the entity is nested within one or
1332 -- more anonymous blocks and the Chars field contains a name with an
1333 -- anonymous block suffix (see Exp_Dbug for furthert details).
1335 -- Has_Atomic_Components (Flag86) [implementation base type only]
1336 -- Present in all types and objects. Set only for an array type or
1337 -- an array object if a valid pragma Atomic_Components applies to the
1338 -- type or object. Note that in the case of an object, this flag is
1339 -- only set on the object if there was an explicit pragma for the
1340 -- object. In other words, the proper test for whether an object has
1341 -- atomic components is to see if either the object or its base type
1342 -- has this flag set. Note that in the case of a type, the pragma will
1343 -- be chained to the rep item chain of the first subtype in the usual
1346 -- Has_Attach_Handler (synthesized)
1347 -- Applies to record types that are constructed by the expander to
1348 -- represent protected types. Returns True if there is at least one
1349 -- Attach_Handler pragma in the corresponding specification.
1351 -- Has_Biased_Representation (Flag139)
1352 -- Present in discrete types (where it applies to the type'size value),
1353 -- and to objects (both stand-alone and components), where it applies to
1354 -- the size of the object from a size or record component clause. In
1355 -- all cases it indicates that the size in question is smaller than
1356 -- would normally be required, but that the size requirement can be
1357 -- satisfied by using a biased representation, in which stored values
1358 -- have the low bound (Expr_Value (Type_Low_Bound (T)) subtracted to
1359 -- reduce the required size. For example, a type with a range of 1..2
1360 -- takes one bit, using 0 to represent 1 and 1 to represent 2.
1362 -- Note that in the object and component cases, the flag is only set if
1363 -- the type is unbiased, but the object specifies a smaller size than the
1364 -- size of the type, forcing biased representation for the object, but
1365 -- the subtype is still an unbiased type.
1367 -- Has_Completion (Flag26)
1368 -- Present in all entities that require a completion (functions,
1369 -- procedures, private types, limited private types, incomplete types,
1370 -- constants and packages that require a body). The flag is set if the
1371 -- completion has been encountered and analyzed.
1373 -- Has_Completion_In_Body (Flag71)
1374 -- Present in all entities for types and subtypes. Set only in "Taft
1375 -- amendment types" (incomplete types whose full declaration appears in
1376 -- the package body).
1378 -- Has_Complex_Representation (Flag140) [implementation base type only]
1379 -- Present in all type entities. Set only for a record base type to
1380 -- which a valid pragma Complex_Representation applies.
1382 -- Has_Component_Size_Clause (Flag68) [implementation base type only]
1383 -- Present in all type entities. Set if a component size clause is
1384 -- present for the given type. Note that this flag can be False even
1385 -- if Component_Size is non-zero (happens in the case of derived types).
1387 -- Has_Constrained_Partial_View (Flag187)
1388 -- Present in private type and their completions, when the private
1389 -- type has no discriminants and the full view has discriminants with
1390 -- defaults. In Ada 2005 heap-allocated objects of such types are not
1391 -- constrained, and can change their discriminants with full assignment.
1393 -- Has_Contiguous_Rep (Flag181)
1394 -- Present in enumeration types. True if the type as a representation
1395 -- clause whose entries are successive integers.
1397 -- Has_Controlling_Result (Flag98)
1398 -- Present in E_Function entities. True if the function is a primitive
1399 -- function of a tagged type which can dispatch on result.
1401 -- Has_Controlled_Component (Flag43) [base type only]
1402 -- Present in all entities. Set only for composite type entities which
1403 -- contain a component that either is a controlled type, or itself
1404 -- contains controlled component (i.e. either Has_Controlled_Component
1405 -- or Is_Controlled is set for at least one component).
1407 -- Has_Convention_Pragma (Flag119)
1408 -- Present in all entities. Set true for an entity for which a valid
1409 -- Convention, Import, or Export pragma has been given. Used to prevent
1410 -- more than one such pragma appearing for a given entity (RM B.1(45)).
1412 -- Has_Delayed_Aspects (Flag200) Present in all entities. Set true if the
1413 -- Rep_Item chain for the entity has one or more N_Aspect_Definition
1414 -- nodes chained which are not to be evaluated till the freeze point.
1415 -- The aspect definition expression clause has been preanalyzed to get
1416 -- visibility at the point of use, but no other action has been taken.
1418 -- Has_Delayed_Freeze (Flag18)
1419 -- Present in all entities. Set to indicate that an explicit freeze
1420 -- node must be generated for the entity at its freezing point. See
1421 -- separate section ("Delayed Freezing and Elaboration") for details.
1423 -- Has_Discriminants (Flag5)
1424 -- Present in all types and subtypes. For types that are allowed to have
1425 -- discriminants (record types and subtypes, task types and subtypes,
1426 -- protected types and subtypes, private types, limited private types,
1427 -- and incomplete types), indicates if the corresponding type or subtype
1428 -- has a known discriminant part. Always false for all other types.
1430 -- Has_Dispatch_Table (Flag220)
1431 -- Present in E_Record_Types that are tagged. Set to indicate that the
1432 -- corresponding dispatch table is already built. This flag is used to
1433 -- avoid duplicate construction of library level dispatch tables (because
1434 -- the declaration of library level objects cause premature construction
1435 -- of the table); otherwise the code that builds the table is added at
1436 -- the end of the list of declarations of the package.
1438 -- Has_Entries (synthesized)
1439 -- Applies to concurrent types. True if any entries are declared
1440 -- within the task or protected definition for the type.
1442 -- Has_Enumeration_Rep_Clause (Flag66)
1443 -- Present in enumeration types. Set if an enumeration representation
1444 -- clause has been given for this enumeration type. Used to prevent more
1445 -- than one enumeration representation clause for a given type. Note
1446 -- that this does not imply a representation with holes, since the rep
1447 -- clause may merely confirm the default 0..N representation.
1449 -- Has_External_Tag_Rep_Clause (Flag110)
1450 -- Present in tagged types. Set if an external_tag rep. clause has been
1451 -- given for this type. Use to avoid the generation of the default
1454 -- Has_Exit (Flag47)
1455 -- Present in loop entities. Set if the loop contains an exit statement.
1457 -- Has_Foreign_Convention (synthesized)
1458 -- Applies to all entities. Determines if the Convention for the
1459 -- entity is a foreign convention (i.e. is other than Convention_Ada,
1460 -- Convention_Intrinsic, Convention_Entry or Convention_Protected).
1462 -- Has_Forward_Instantiation (Flag175)
1463 -- Present in package entities. Set true for packages that contain
1464 -- instantiations of local generic entities, before the corresponding
1465 -- generic body has been seen. If a package has a forward instantiation,
1466 -- we cannot inline subprograms appearing in the same package because
1467 -- the placement requirements of the instance will conflict with the
1468 -- linear elaboration of front-end inlining.
1470 -- Has_Fully_Qualified_Name (Flag173)
1471 -- Present in all entities. Set True if the name in the Chars field has
1472 -- been replaced by the fully qualified name, as used for debug output.
1473 -- See Exp_Dbug for a full description of the use of this flag and also
1474 -- the related flag Has_Qualified_Name.
1476 -- Has_Gigi_Rep_Item (Flag82)
1477 -- Present in all entities. Set if the rep item chain (referenced by
1478 -- First_Rep_Item and linked through the Next_Rep_Item chain) contains a
1479 -- representation item that needs to be specially processed by Gigi, i.e.
1480 -- one of the following items:
1482 -- Machine_Attribute pragma
1483 -- Linker_Alias pragma
1484 -- Linker_Section pragma
1485 -- Linker_Constructor pragma
1486 -- Linker_Destructor pragma
1487 -- Weak_External pragma
1489 -- If this flag is set, then Gigi should scan the rep item chain to
1490 -- process any of these items that appear. At least one such item will
1493 -- Has_Homonym (Flag56)
1494 -- Present in all entities. Set if an entity has a homonym in the same
1495 -- scope. Used by Gigi to generate unique names for such entities.
1497 -- Has_Initial_Value (Flag219)
1498 -- Present in entities for variables and out parameters. Set if there
1499 -- is an explicit initial value expression in the declaration of the
1500 -- variable. Note that this is set only if this initial value is
1501 -- explicit, it is not set for the case of implicit initialization
1502 -- of access types or controlled types. Always set to False for out
1503 -- parameters. Also present in entities for in and in-out parameters,
1504 -- but always false in these cases.
1506 -- Has_Interrupt_Handler (synthesized)
1507 -- Applies to all protected type entities. Set if the protected type
1508 -- definition contains at least one procedure to which a pragma
1509 -- Interrupt_Handler applies.
1511 -- Has_Invariants (Flag232)
1512 -- Present in all type entities and in subprogram entities. Set True in
1513 -- private types if an Invariant or Invariant'Class aspect applies to the
1514 -- type, or if the type inherits one or more Invariant'Class aspects.
1515 -- Also set in the corresponding full type. Note: if this flag is set
1516 -- True, then usually the Invariant_Procedure attribute is set once the
1517 -- type is frozen, however this may not be true in some error situations.
1518 -- Note that it might be the full type which has inheritable invariants,
1519 -- and then the flag will also be set in the private type. Also set in
1520 -- the invariant procedure entity, to distinguish it among entries in the
1521 -- Subprograms_For_Type.
1523 -- Has_Inheritable_Invariants (Flag248)
1524 -- Present in all type entities. Set True in private types from which one
1525 -- or more Invariant'Class aspects will be inherited if a another type is
1526 -- derived from the type (i.e. those types which have an Invariant'Class
1527 -- aspect, or which inherit one or more Invariant'Class aspects). Also
1528 -- set in the corresponding full types. Note that it might be the full
1529 -- type which has inheritable invariants, and in this case the flag will
1530 -- also be set in the private type.
1532 -- Has_Machine_Radix_Clause (Flag83)
1533 -- Present in decimal types and subtypes, set if a Machine_Radix
1534 -- representation clause is present. This flag is used to detect
1535 -- the error of multiple machine radix clauses for a single type.
1537 -- Has_Master_Entity (Flag21)
1538 -- Present in entities that can appear in the scope stack (see spec
1539 -- of Sem). It is set if a task master entity (_master) has been
1540 -- declared and initialized in the corresponding scope.
1542 -- Has_Missing_Return (Flag142)
1543 -- Present in functions and generic functions. Set if there is one or
1544 -- more missing return statements in the function. This is used to
1545 -- control wrapping of the body in Exp_Ch6 to ensure that the program
1546 -- error exeption is correctly raised in this case at runtime.
1548 -- Has_Up_Level_Access (Flag215)
1549 -- Present in E_Variable and E_Constant entities. Set if the entity
1550 -- is a local variable declared in a subprogram p and is accessed in
1551 -- a subprogram nested inside p. Currently this flag is only set when
1552 -- VM_Target /= No_VM, for efficiency, since only the .NET back-end
1553 -- makes use of it to generate proper code for up-level references.
1555 -- Has_Nested_Block_With_Handler (Flag101)
1556 -- Present in scope entities. Set if there is a nested block within the
1557 -- scope that has an exception handler and the two scopes are in the
1558 -- same procedure. This is used by the backend for controlling certain
1559 -- optimizations to ensure that they are consistent with exceptions.
1560 -- See documentation in Gigi for further details.
1562 -- Has_Non_Standard_Rep (Flag75) [implementation base type only]
1563 -- Present in all type entities. Set when some representation clause
1564 -- or pragma causes the representation of the item to be significantly
1565 -- modified. In this category are changes of small or radix for a
1566 -- fixed-point type, change of component size for an array, and record
1567 -- or enumeration representation clauses, as well as packed pragmas.
1568 -- All other representation clauses (e.g. Size and Alignment clauses)
1569 -- are not considered to be significant since they do not affect
1570 -- stored bit patterns.
1572 -- Has_Object_Size_Clause (Flag172)
1573 -- Present in entities for types and subtypes. Set if an Object_Size
1574 -- clause has been processed for the type Used to prevent multiple
1575 -- Object_Size clauses for a given entity.
1577 -- Has_Per_Object_Constraint (Flag154)
1578 -- Present in E_Component entities, true if the subtype of the
1579 -- component has a per object constraint. Per object constraints result
1580 -- from the following situations:
1582 -- 1. N_Attribute_Reference - when the prefix is the enclosing type and
1583 -- the attribute is Access.
1584 -- 2. N_Discriminant_Association - when the expression uses the
1585 -- discriminant of the enclosing type.
1586 -- 3. N_Index_Or_Discriminant_Constraint - when at least one of the
1587 -- individual constraints is a per object constraint.
1588 -- 4. N_Range - when the lower or upper bound uses the discriminant of
1589 -- the enclosing type.
1590 -- 5. N_Range_Constraint - when the range expression uses the
1591 -- discriminant of the enclosing type.
1593 -- Has_Persistent_BSS (Flag188)
1594 -- Present in all entities. Set True for entities to which a valid
1595 -- pragma Persistent_BSS applies. Note that although the pragma is
1596 -- only meaningful for objects, we set it for all entities in a unit
1597 -- to which the pragma applies, as well as the unit entity itself, for
1598 -- convenience in propagating the flag to contained entities.
1600 -- Has_Postconditions (Flag240)
1601 -- Present in subprogram entities. Set if postconditions are active for
1602 -- the procedure, and a _postconditions procedure has been generated.
1604 -- Has_Pragma_Controlled (Flag27) [implementation base type only]
1605 -- Present in access type entities. It is set if a pragma Controlled
1606 -- applies to the access type.
1608 -- Has_Pragma_Elaborate_Body (Flag150)
1609 -- Present in all entities. Set in compilation unit entities if a
1610 -- pragma Elaborate_Body applies to the compilation unit.
1612 -- Has_Pragma_Inline (Flag157)
1613 -- Present in all entities. Set for functions and procedures for which a
1614 -- pragma Inline or Inline_Always applies to the subprogram. Note that
1615 -- this flag can be set even if Is_Inlined is not set. This happens for
1616 -- pragma Inline (if Inline_Active is False). In other words, the flag
1617 -- Has_Pragma_Inline represents the formal semantic status, and is used
1618 -- for checking semantic correctness. The flag Is_Inlined indicates
1619 -- whether inlining is actually active for the entity.
1621 -- Has_Pragma_Inline_Always (Flag230)
1622 -- Present in all entities. Set for functions and procedures for which a
1623 -- pragma Inline_Always applies. Note that if this flag is set, the flag
1624 -- Has_Pragma_Inline is also set.
1626 -- Has_Pragma_Ordered (Flag198) [implementation base type only]
1627 -- Present in entities for enumeration types. If set indicates that a
1628 -- valid pragma Ordered was given for the type. This flag is inherited
1629 -- by derived enumeration types. We don't need to distinguish the derived
1630 -- case since we allow multiple occurrences of this pragma anyway.
1632 -- Has_Pragma_Pack (Flag121) [implementation base type only]
1633 -- Present in all entities. If set, indicates that a valid pragma Pack
1634 -- was given for the type. Note that this flag is not inherited by
1635 -- derived type. See also the Is_Packed flag.
1637 -- Has_Pragma_Pure (Flag203)
1638 -- Present in all entities. If set, indicates that a valid pragma Pure
1639 -- was given for the entity. In some cases, we need to test whether
1640 -- Is_Pure was explicitly set using this pragma.
1642 -- Has_Pragma_Preelab_Init (Flag221)
1643 -- Present in type and subtype entities. If set indicates that a valid
1644 -- pragma Preelaborable_Initialization applies to the type.
1646 -- Has_Pragma_Pure_Function (Flag179)
1647 -- Present in all entities. If set, indicates that a valid pragma
1648 -- Pure_Function was given for the entity. In some cases, we need to
1649 -- know that Is_Pure was explicitly set using this pragma.
1651 -- Has_Pragma_Thread_Local_Storage (Flag169)
1652 -- Present in all entities. If set, indicates that a valid pragma
1653 -- Thread_Local_Storage was given for the entity.
1655 -- Has_Pragma_Unmodified (Flag233)
1656 -- Present in all entities. Can only be set for variables (E_Variable,
1657 -- E_Out_Parameter, E_In_Out_Parameter). Set if a valid pragma Unmodified
1658 -- applies to the variable, indicating that no warning should be given
1659 -- if the entity is never modified. Note that clients should generally
1660 -- not test this flag directly, but instead use function Has_Unmodified.
1662 -- Has_Pragma_Unreferenced (Flag180)
1663 -- Present in all entities. Set if a valid pragma Unreferenced applies
1664 -- to the entity, indicating that no warning should be given if the
1665 -- entity has no references, but a warning should be given if it is
1666 -- in fact referenced. For private types, this flag is set in both the
1667 -- private entity and full entity if the pragma applies to either. Note
1668 -- that clients should generally not test this flag directly, but instead
1669 -- use function Has_Unreferenced.
1671 -- Has_Pragma_Unreferenced_Objects (Flag212)
1672 -- Present in type and subtype entities. Set if a valid pragma
1673 -- Unreferenced_Objects applies to the type, indicating that no warning
1674 -- should be given for objects of such a type for being unreferenced
1675 -- (but unlike the case with pragma Unreferenced, it is ok to reference
1676 -- such an object and no warning is generated.
1678 -- Has_Predicates (Flag250)
1679 -- Present in all entities. Set in type and subtype entities if a pragma
1680 -- Predicate or Predicate aspect applies to the type, or if it inherits a
1681 -- Predicate aspect from its parent or progenitor types. Also set in the
1682 -- predicate function entity, to distinguish it among entries in the
1683 -- Subprograms_For_Type.
1685 -- Has_Primitive_Operations (Flag120) [base type only]
1686 -- Present in all type entities. Set if at least one primitive operation
1687 -- is defined for the type.
1689 -- Has_Private_Ancestor (synthesized)
1690 -- Applies to all type and subtype entities. Returns True if at least
1691 -- one ancestor is private, and otherwise False if there are no private
1694 -- Has_Private_Declaration (Flag155)
1695 -- Present in all entities. Returns True if it is the defining entity
1696 -- of a private type declaration or its corresponding full declaration.
1697 -- This flag is thus preserved when the full and the partial views are
1698 -- exchanged, to indicate if a full type declaration is a completion.
1699 -- Used for semantic checks in E.4(18) and elsewhere.
1701 -- Has_Qualified_Name (Flag161)
1702 -- Present in all entities. Set True if the name in the Chars field
1703 -- has been replaced by its qualified name, as used for debug output.
1704 -- See Exp_Dbug for a full description of qualification requirements.
1705 -- For some entities, the name is the fully qualified name, but there
1706 -- are exceptions. In particular, for local variables in procedures,
1707 -- we do not include the procedure itself or higher scopes. See also
1708 -- the flag Has_Fully_Qualified_Name, which is set if the name does
1709 -- indeed include the fully qualified name.
1711 -- Has_RACW (Flag214)
1712 -- Present in package spec entities. Set if the spec contains the
1713 -- declaration of a remote access-to-classwide type.
1715 -- Has_Record_Rep_Clause (Flag65) [implementation base type only]
1716 -- Present in record types. Set if a record representation clause has
1717 -- been given for this record type. Used to prevent more than one such
1718 -- clause for a given record type. Note that this is initially cleared
1719 -- for a derived type, even though the representation is inherited. See
1720 -- also the flag Has_Specified_Layout.
1722 -- Has_Recursive_Call (Flag143)
1723 -- Present in procedures. Set if a direct parameterless recursive call
1724 -- is detected while analyzing the body. Used to activate some error
1725 -- checks for infinite recursion.
1727 -- Has_Size_Clause (Flag29)
1728 -- Present in entities for types and objects. Set if a size clause is
1729 -- present for the entity. Used to prevent multiple Size clauses for a
1730 -- given entity. Note that it is always initially cleared for a derived
1731 -- type, even though the Size for such a type is inherited from a Size
1732 -- clause given for the parent type.
1734 -- Has_Small_Clause (Flag67)
1735 -- Present in ordinary fixed point types (but not subtypes). Indicates
1736 -- that a small clause has been given for the entity. Used to prevent
1737 -- multiple Small clauses for a given entity. Note that it is always
1738 -- initially cleared for a derived type, even though the Small for such
1739 -- a type is inherited from a Small clause given for the parent type.
1741 -- Has_Specified_Layout (Flag100) [implementation base type only]
1742 -- Present in all type entities. Set for a record type or subtype if
1743 -- the record layout has been specified by a record representation
1744 -- clause. Note that this differs from the flag Has_Record_Rep_Clause
1745 -- in that it is inherited by a derived type. Has_Record_Rep_Clause is
1746 -- used to indicate that the type is mentioned explicitly in a record
1747 -- representation clause, and thus is not inherited by a derived type.
1748 -- This flag is always False for non-record types.
1750 -- Has_Specified_Stream_Input (Flag190)
1751 -- Has_Specified_Stream_Output (Flag191)
1752 -- Has_Specified_Stream_Read (Flag192)
1753 -- Has_Specified_Stream_Write (Flag193)
1754 -- Present in all type and subtype entities. Set for a given view if the
1755 -- corresponding stream-oriented attribute has been defined by an
1756 -- attribute definition clause. When such a clause occurs, a TSS is set
1757 -- on the underlying full view; the flags are used to track visibility of
1758 -- the attribute definition clause for partial or incomplete views.
1760 -- Has_Static_Discriminants (Flag211)
1761 -- Present in record subtypes constrained by discriminant values. Set if
1762 -- all the discriminant values have static values, meaning that in the
1763 -- case of a variant record, the component list can be trimmed down to
1764 -- include only the components corresponding to these discriminants.
1766 -- Has_Storage_Size_Clause (Flag23) [implementation base type only]
1767 -- Present in task types and access types. It is set if a Storage_Size
1768 -- clause is present for the type. Used to prevent multiple clauses for
1769 -- one type. Note that this flag is initially cleared for a derived type
1770 -- even though the Storage_Size for such a type is inherited from a
1771 -- Storage_Size clause given for the parent type. Note that in the case
1772 -- of access types, this flag is present only in the root type, since a
1773 -- storage size clause cannot be given to a derived type.
1775 -- Has_Stream_Size_Clause (Flag184)
1776 -- Present in all entities. It is set for types which have a Stream_Size
1777 -- clause attribute. Used to prevent multiple Stream_Size clauses for a
1778 -- given entity, and also whether it is necessary to check for a stream
1781 -- Has_Subprogram_Descriptor (Flag93)
1782 -- This flag is set on entities for which zero-cost exception subprogram
1783 -- descriptors can be generated (subprograms and library level package
1784 -- declarations and bodies). It indicates that a subprogram descriptor
1785 -- has been generated, and is used to suppress generation of multiple
1786 -- descriptors (e.g. when instantiating generic bodies).
1788 -- Has_Task (Flag30) [base type only]
1789 -- Present in all type entities. Set on task types themselves, and also
1790 -- (recursively) on any composite type which has a component for which
1791 -- Has_Task is set. The meaning is that an allocator or declaration of
1792 -- such an object must create the required tasks. Note: the flag is not
1793 -- set on access types, even if they designate an object that Has_Task.
1795 -- Has_Thunks (Flag228)
1796 -- Applies to E_Constant entities marked Is_Tag. True for secondary tag
1797 -- referencing a dispatch table whose contents are pointers to thunks.
1799 -- Has_Unchecked_Union (Flag123) [base type only]
1800 -- Present in all type entities. Set on unchecked unions themselves
1801 -- and (recursively) on any composite type which has a component for
1802 -- which Has_Unchecked_Union is set. The meaning is that a comparison
1803 -- operation for the type is not permitted. Note that the flag is not
1804 -- set on access types, even if they designate an object that has
1805 -- the flag Has_Unchecked_Union set.
1807 -- Has_Unknown_Discriminants (Flag72)
1808 -- Present in all entities. Set for types with unknown discriminants.
1809 -- Types can have unknown discriminants either from their declaration or
1810 -- through type derivation. The use of this flag exactly meets the spec
1811 -- in RM 3.7(26). Note that all class-wide types are considered to have
1812 -- unknown discriminants. Note that both Has_Discriminants and
1813 -- Has_Unknown_Discriminants may be true for a type. Class-wide types and
1814 -- their subtypes have unknown discriminants and can have declared ones
1815 -- as well. Private types declared with unknown discriminants may have a
1816 -- full view that has explicit discriminants, and both flag will be set
1817 -- on the partial view, to insure that discriminants are properly
1818 -- inherited in certain contexts.
1820 -- Has_Volatile_Components (Flag87) [implementation base type only]
1821 -- Present in all types and objects. Set only for an array type or array
1822 -- object if a valid pragma Volatile_Components or a valid pragma
1823 -- Atomic_Components applies to the type or object. Note that in the case
1824 -- of an object, this flag is only set on the object if there was an
1825 -- explicit pragma for the object. In other words, the proper test for
1826 -- whether an object has volatile components is to see if either the
1827 -- object or its base type has this flag set. Note that in the case of a
1828 -- type the pragma will be chained to the rep item chain of the first
1829 -- subtype in the usual manner.
1831 -- Has_Xref_Entry (Flag182)
1832 -- Present in all entities. Set if an entity has an entry in the Xref
1833 -- information generated in ali files. This is true for all source
1834 -- entities in the extended main source file. It is also true of entities
1835 -- in other packages that are referenced directly or indirectly from the
1836 -- main source file (indirect reference occurs when the main source file
1837 -- references an entity with a type reference. See package Lib.Xref for
1838 -- further details).
1840 -- Hiding_Loop_Variable (Node8)
1841 -- Present in variables. Set only if a variable of a discrete type is
1842 -- hidden by a loop variable in the same local scope, in which case
1843 -- the Hiding_Loop_Variable field of the hidden variable points to
1844 -- the E_Loop_Parameter entity doing the hiding. Used in processing
1845 -- warning messages if the hidden variable turns out to be unused
1846 -- or is referenced without being set.
1849 -- Present in all entities. Link for list of entities that have the
1850 -- same source name and that are declared in the same or enclosing
1851 -- scopes. Homonyms in the same scope are overloaded. Used for name
1852 -- resolution and for the generation of debugging information.
1854 -- Implementation_Base_Type (synthesized)
1855 -- Applies to all entities. For types, similar to Base_Type, but never
1856 -- returns a private type when applied to a non-private type. Instead in
1857 -- this case, it always returns the Underlying_Type of the base type, so
1858 -- that we still have a concrete type. For entities other than types,
1859 -- returns the entity unchanged.
1861 -- Interface_Alias (Node25)
1862 -- Present in subprograms that cover a primitive operation of an abstract
1863 -- interface type. Can be set only if the Is_Hidden flag is also set,
1864 -- since such entities are always hidden. Points to its associated
1865 -- interface subprogram. It is used to register the subprogram in
1866 -- secondary dispatch table of the interface (Ada 2005: AI-251).
1868 -- Interfaces (Elist25)
1869 -- Present in record types and subtypes. List of abstract interfaces
1870 -- implemented by a tagged type that are not already implemented by the
1871 -- ancestors (Ada 2005: AI-251).
1873 -- In_Package_Body (Flag48)
1874 -- Present in package entities. Set on the entity that denotes the
1875 -- package (the defining occurrence of the package declaration) while
1876 -- analyzing and expanding the package body. Reset on completion of
1877 -- analysis/expansion.
1879 -- In_Private_Part (Flag45)
1880 -- Present in all entities. Can be set only in package entities and
1881 -- objects. For package entities, this flag is set to indicate that the
1882 -- private part of the package is being analyzed. The flag is reset at
1883 -- the end of the package declaration. For objects it indicates that the
1884 -- declaration of the object occurs in the private part of a package.
1886 -- Inner_Instances (Elist23)
1887 -- Present in generic units. Contains element list of units that are
1888 -- instantiated within the given generic. Used to diagnose circular
1891 -- Interface_Name (Node21)
1892 -- Present in exceptions, functions, procedures, variables, constants,
1893 -- and packages. Set to Empty unless an export, import, or interface
1894 -- name pragma has explicitly specified an external name, in which
1895 -- case it references an N_String_Literal node for the specified
1896 -- external name. In the case of exceptions, the field is set by
1897 -- Import_Exception/Export_Exception (which can be used in OpenVMS
1898 -- versions only). Note that if this field is Empty, and Is_Imported
1899 -- or Is_Exported is set, then the default interface name is the name
1900 -- of the entity, cased in a manner that is appropriate to the system
1901 -- in use. Note that Interface_Name is ignored if an address clause
1902 -- is present (since it is meaningless in this case).
1904 -- An additional special case usage of this field is in JGNAT for
1905 -- E_Component and E_Discriminant. JGNAT allows these entities to be
1906 -- imported by specifying pragma Import within a component's containing
1907 -- record definition. This supports interfacing to object fields defined
1908 -- within Java classes, and such pragmas are generated by the jvm2ada
1909 -- binding generator tool whenever it processes classes with public
1910 -- object fields. A pragma Import for a component can define the
1911 -- External_Name of the imported Java field (which is generally needed,
1912 -- because Java names are case sensitive).
1914 -- Invariant_Procedure (synthesized)
1915 -- Present in types and subtypes. Set for private types if one or more
1916 -- Invariant, or Invariant'Class, or inherited Invariant'Class aspects
1917 -- apply to the type. Points to the entity for a procedure which checks
1918 -- the invariant. This invariant procedure takes a single argument of the
1919 -- given type, and returns if the invariant holds, or raises exception
1920 -- Assertion_Error with an appropriate message if it does not hold. This
1921 -- attribute is present but always empty for private subtypes. This
1922 -- attribute is also set for the corresponding full type.
1924 -- Note: the reason this is marked as a synthesized attribute is that the
1925 -- way this is stored is as an element of the Subprograms_For_Type field.
1928 -- Present in packages and types. Set when analyzing a use clause for
1929 -- the corresponding entity. Reset at end of corresponding declarative
1930 -- part. The flag on a type is also used to determine the visibility of
1931 -- the primitive operators of the type.
1933 -- Is_Abstract_Subprogram (Flag19)
1934 -- Present in all subprograms and entries. Set for abstract subprograms.
1935 -- Always False for enumeration literals and entries. See also
1936 -- Requires_Overriding.
1938 -- Is_Abstract_Type (Flag146)
1939 -- Present in all types. Set for abstract types.
1941 -- Is_Access_Constant (Flag69)
1942 -- Present in access types and subtypes. Indicates that the keyword
1943 -- constant was present in the access type definition.
1945 -- Is_Access_Protected_Subprogram_Type (synthesized)
1946 -- Applies to all types, true for named and anonymous access to
1947 -- protected subprograms.
1949 -- Is_Access_Type (synthesized)
1950 -- Applies to all entities, true for access types and subtypes
1952 -- Is_Ada_2005_Only (Flag185)
1953 -- Present in all entities, true if a valid pragma Ada_05 or Ada_2005
1954 -- applies to the entity which specifically names the entity, indicating
1955 -- that the entity is Ada 2005 only. Note that this flag is not set if
1956 -- the entity is part of a unit compiled with the normal no-argument form
1957 -- of pragma Ada_05 or Ada_2005.
1959 -- Is_Ada_2012_Only (Flag199)
1960 -- Present in all entities, true if a valid pragma Ada_12 or Ada_2012
1961 -- applies to the entity which specifically names the entity, indicating
1962 -- that the entity is Ada 2012 only. Note that this flag is not set if
1963 -- the entity is part of a unit compiled with the normal no-argument form
1964 -- of pragma Ada_12 or Ada_2012.
1966 -- Is_Aliased (Flag15)
1967 -- Present in objects whose declarations carry the keyword aliased,
1968 -- and on record components that have the keyword.
1970 -- Is_AST_Entry (Flag132)
1971 -- Present in entry entities. Set if a valid pragma AST_Entry applies
1972 -- to the entry. This flag can only be set in OpenVMS versions of GNAT.
1973 -- Note: we also allow the flag to appear in entry families, but given
1974 -- the current implementation of the pragma AST_Entry, this flag will
1975 -- always be False in entry families.
1977 -- Is_Atomic (Flag85)
1978 -- Present in all type entities, and also in constants, components and
1979 -- variables. Set if a pragma Atomic or Shared applies to the entity.
1980 -- In the case of private and incomplete types, this flag is set in
1981 -- both the partial view and the full view.
1983 -- Is_Array_Type (synthesized)
1984 -- Applies to all entities, true for array types and subtypes
1986 -- Is_Asynchronous (Flag81)
1987 -- Present in all type entities and in procedure entities. Set
1988 -- if a pragma Asynchronous applies to the entity.
1990 -- Is_Bit_Packed_Array (Flag122) [implementation base type only]
1991 -- Present in all entities. This flag is set for a packed array type that
1992 -- is bit packed (i.e. the component size is known by the front end and
1993 -- is in the range 1-7, 9-15, 17-31, or 33-63). Is_Packed is always set
1994 -- if Is_Bit_Packed_Array is set, but it is possible for Is_Packed to be
1995 -- set without Is_Bit_Packed_Array for the case of an array having one or
1996 -- more index types that are enumeration types with non-standard
1997 -- enumeration representations.
1999 -- Is_Boolean_Type (synthesized)
2000 -- Applies to all entities, true for boolean types and subtypes,
2001 -- i.e. Standard.Boolean and all types ultimately derived from it.
2003 -- Is_Called (Flag102)
2004 -- Present in subprograms. Returns true if the subprogram is called
2005 -- in the unit being compiled or in a unit in the context. Used for
2008 -- Is_Character_Type (Flag63)
2009 -- Present in all entities. Set for character types and subtypes,
2010 -- i.e. enumeration types that have at least one character literal.
2012 -- Is_Child_Unit (Flag73)
2013 -- Present in all entities. Set only for defining entities of program
2014 -- units that are child units (but False for subunits).
2016 -- Is_Class_Wide_Type (synthesized)
2017 -- Applies to all entities, true for class wide types and subtypes
2019 -- Is_Class_Wide_Equivalent_Type (Flag35)
2020 -- Present in record types and subtypes. Set to True, if the type acts
2021 -- as a class-wide equivalent type, i.e. the Equivalent_Type field of
2022 -- some class-wide subtype entity references this record type.
2024 -- Is_Compilation_Unit (Flag149)
2025 -- Present in all entities. Set if the entity is a package or subprogram
2026 -- entity for a compilation unit other than a subunit (since we treat
2027 -- subunits as part of the same compilation operation as the ultimate
2028 -- parent, we do not consider them to be separate units for this flag).
2030 -- Is_Completely_Hidden (Flag103)
2031 -- Present in all entities. This flag can be set only for E_Discriminant
2032 -- entities. This flag can be set only for girder discriminants of
2033 -- untagged types. When set, the entity is a girder discriminant of a
2034 -- derived untagged type which is not directly visible in the derived
2035 -- type because the derived type or one of its ancestors have renamed the
2036 -- discriminants in the root type. Note: there are girder discriminants
2037 -- which are not Completely_Hidden (e.g. discriminants of a root type).
2039 -- Is_Composite_Type (synthesized)
2040 -- Applies to all entities, true for all composite types and
2041 -- subtypes. Either Is_Composite_Type or Is_Elementary_Type (but
2042 -- not both) is true of any type.
2044 -- Is_Concurrent_Record_Type (Flag20)
2045 -- Present in record types and subtypes. Set if the type was created
2046 -- by the expander to represent a task or protected type. For every
2047 -- concurrent type, such as record type is constructed, and task and
2048 -- protected objects are instances of this record type at runtime
2049 -- (Gigi will replace declarations of the concurrent type using the
2050 -- declarations of the corresponding record type). See package Exp_Ch9
2051 -- for further details.
2053 -- Is_Concurrent_Type (synthesized)
2054 -- Applies to all entities, true for task types and subtypes and for
2055 -- protected types and subtypes.
2057 -- Is_Constant_Object (synthesized)
2058 -- Applies to all entities, true for E_Constant, E_Loop_Parameter, and
2059 -- E_In_Parameter entities.
2061 -- Is_Constrained (Flag12)
2062 -- Present in types or subtypes which may have index, discriminant
2063 -- or range constraint (i.e. array types and subtypes, record types
2064 -- and subtypes, string types and subtypes, and all numeric types).
2065 -- Set if the type or subtype is constrained.
2067 -- Is_Constr_Subt_For_U_Nominal (Flag80)
2068 -- Present in all types and subtypes. Set true only for the constructed
2069 -- subtype of an object whose nominal subtype is unconstrained. Note
2070 -- that the constructed subtype itself will be constrained.
2072 -- Is_Constr_Subt_For_UN_Aliased (Flag141)
2073 -- Present in all types and subtypes. This flag can be set only if
2074 -- Is_Constr_Subt_For_U_Nominal is also set. It indicates that in
2075 -- addition the object concerned is aliased. This flag is used by
2076 -- Gigi to determine whether a template must be constructed.
2078 -- Is_Constructor (Flag76)
2079 -- Present in function and procedure entities. Set if a pragma
2080 -- CPP_Constructor applies to the subprogram.
2082 -- Is_Controlled (Flag42) [base type only]
2083 -- Present in all type entities. Indicates that the type is controlled,
2084 -- i.e. is either a descendant of Ada.Finalization.Controlled or of
2085 -- Ada.Finalization.Limited_Controlled.
2087 -- Is_Controlling_Formal (Flag97)
2088 -- Present in all Formal_Kind entities. Marks the controlling parameters
2089 -- of dispatching operations.
2091 -- Is_CPP_Class (Flag74)
2092 -- Present in all type entities, set only for tagged types to which a
2093 -- valid pragma Import (CPP, ...) or pragma CPP_Class has been applied.
2095 -- Is_Decimal_Fixed_Point_Type (synthesized)
2096 -- Applies to all type entities, true for decimal fixed point
2097 -- types and subtypes.
2099 -- Is_Descendent_Of_Address (Flag223)
2100 -- Present in all type and subtype entities. Indicates that a type is an
2101 -- address type that is visibly a numeric type. Used for semantic checks
2102 -- on VMS to remove ambiguities in universal integer expressions that may
2103 -- have an address interpretation
2105 -- Is_Discrete_Type (synthesized)
2106 -- Applies to all entities, true for all discrete types and subtypes
2108 -- Is_Discrete_Or_Fixed_Point_Type (synthesized)
2109 -- Applies to all entities, true for all discrete types and subtypes
2110 -- and all fixed-point types and subtypes.
2112 -- Is_Discrim_SO_Function (Flag176)
2113 -- Present in all entities. Set only in E_Function entities that Layout
2114 -- creates to compute discriminant-dependent dynamic size/offset values.
2116 -- Is_Discriminal (synthesized)
2117 -- Applies to all entities, true for renamings of discriminants. Such
2118 -- entities appear as constants or in parameters.
2120 -- Is_Dispatch_Table_Entity (Flag234)
2121 -- Applies to all entities. Set to indicate to the backend that this
2122 -- entity is associated with a dispatch table.
2124 -- Is_Dispatching_Operation (Flag6)
2125 -- Present in all entities. Set true for procedures, functions,
2126 -- generic procedures and generic functions if the corresponding
2127 -- operation is dispatching.
2129 -- Is_Dynamic_Scope (synthesized)
2130 -- Applies to all Entities. Returns True if the entity is a dynamic
2131 -- scope (i.e. a block, subprogram, task_type, entry
2132 -- or extended return statement).
2134 -- Is_Elementary_Type (synthesized)
2135 -- Applies to all entities, true for all elementary types and
2136 -- subtypes. Either Is_Composite_Type or Is_Elementary_Type (but
2137 -- not both) is true of any type.
2139 -- Is_Eliminated (Flag124)
2140 -- Present in type entities, subprogram entities, and object entities.
2141 -- Indicates that the corresponding entity has been eliminated by use
2142 -- of pragma Eliminate. Also used to mark subprogram entities whose
2143 -- declaration and body are within unreachable code that is removed.
2145 -- Is_Enumeration_Type (synthesized)
2146 -- Present in all entities, true for enumeration types and subtypes
2148 -- Is_Entry (synthesized)
2149 -- Applies to all entities, True only for entry and entry family
2150 -- entities and False for all other entity kinds.
2152 -- Is_Entry_Formal (Flag52)
2153 -- Present in all entities. Set only for entry formals (which can
2154 -- only be in, in-out or out parameters). This flag is used to speed
2155 -- up the test for the need to replace references in Exp_Ch2.
2157 -- Is_Exported (Flag99)
2158 -- Present in all entities. Set if the entity is exported. For now we
2159 -- only allow the export of constants, exceptions, functions, procedures
2160 -- and variables, but that may well change later on. Exceptions can only
2161 -- be exported in the OpenVMS and Java VM implementations of GNAT.
2163 -- Is_First_Subtype (Flag70)
2164 -- Present in all entities. True for first subtypes (RM 3.2.1(6)),
2165 -- i.e. the entity in the type declaration that introduced the type.
2166 -- This may be the base type itself (e.g. for record declarations and
2167 -- enumeration type declarations), or it may be the first subtype of
2168 -- an anonymous base type (e.g. for integer type declarations or
2169 -- constrained array declarations).
2171 -- Is_Fixed_Point_Type (synthesized)
2172 -- Applies to all entities, true for decimal and ordinary fixed
2173 -- point types and subtypes
2175 -- Is_Floating_Point_Type (synthesized)
2176 -- Applies to all entities, true for float types and subtypes
2178 -- Is_Formal (synthesized)
2179 -- Applies to all entities, true for IN, IN OUT and OUT parameters
2181 -- Is_Formal_Object (synthesized)
2182 -- Applies to all entities, true for generic IN and IN OUT parameters
2184 -- Is_Formal_Subprogram (Flag111)
2185 -- Present in all entities. Set for generic formal subprograms.
2187 -- Is_For_Access_Subtype (Flag118)
2188 -- Present in E_Private_Subtype and E_Record_Subtype entities. Means the
2189 -- sole purpose of the type is to be designated by an Access_Subtype and
2190 -- hence should not be expanded into components because the type may not
2191 -- have been found or frozen yet.
2193 -- Is_Frozen (Flag4)
2194 -- Present in all type and subtype entities. Set if type or subtype has
2197 -- Is_Generic_Actual_Type (Flag94)
2198 -- Present in all type and subtype entities. Set in the subtype
2199 -- declaration that renames the generic formal as a subtype of the
2200 -- actual. Guarantees that the subtype is not static within the instance.
2202 -- Is_Generic_Instance (Flag130)
2203 -- Present in all entities. Set to indicate that the entity is an
2204 -- instance of a generic unit, or a formal package (which is an instance
2205 -- of the template).
2207 -- Is_Generic_Subprogram (synthesized)
2208 -- Applies to all entities. Yields True for a generic subprogram
2209 -- (generic function, generic subprogram), False for all other entities.
2211 -- Is_Generic_Type (Flag13)
2212 -- Present in all entities. Set for types which are generic formal types.
2213 -- Such types have an Ekind that corresponds to their classification, so
2214 -- the Ekind cannot be used to identify generic types.
2216 -- Is_Generic_Unit (synthesized)
2217 -- Applies to all entities. Yields True for a generic unit (generic
2218 -- package, generic function, generic procedure), and False for all
2221 -- Is_Hidden (Flag57)
2222 -- Present in all entities. Set true for all entities declared in the
2223 -- private part or body of a package. Also marks generic formals of a
2224 -- formal package declared without a box. For library level entities,
2225 -- this flag is set if the entity is not publicly visible. This flag
2226 -- is reset when compiling the body of the package where the entity
2227 -- is declared, when compiling the private part or body of a public
2228 -- child unit, and when compiling a private child unit (see Install_
2229 -- Private_Declaration in sem_ch7).
2231 -- Is_Hidden_Open_Scope (Flag171)
2232 -- Present in all entities. Set true for a scope that contains the
2233 -- instantiation of a child unit, and whose entities are not visible
2234 -- during analysis of the instance.
2236 -- Is_Immediately_Visible (Flag7)
2237 -- Present in all entities. Set if entity is immediately visible, i.e.
2238 -- is defined in some currently open scope (RM 8.3(4)).
2240 -- Is_Imported (Flag24)
2241 -- Present in all entities. Set if the entity is imported. For now we
2242 -- only allow the import of exceptions, functions, procedures, packages.
2243 -- and variables. Exceptions can only be imported in the OpenVMS and
2244 -- Java VM implementations of GNAT. Packages and types can only be
2245 -- imported in the Java VM implementation.
2247 -- Is_Incomplete_Or_Private_Type (synthesized)
2248 -- Applies to all entities, true for private and incomplete types
2250 -- Is_Incomplete_Type (synthesized)
2251 -- Applies to all entities, true for incomplete types and subtypes
2253 -- Is_Inlined (Flag11)
2254 -- Present in all entities. Set for functions and procedures which are
2255 -- to be inlined. For subprograms created during expansion, this flag
2256 -- may be set directly by the expander to request inlining. Also set
2257 -- for packages that contain inlined subprograms, whose bodies must be
2258 -- be compiled. Is_Inlined is also set on generic subprograms and is
2259 -- inherited by their instances. It is also set on the body entities
2260 -- of inlined subprograms. See also Has_Pragma_Inline.
2262 -- Is_Instantiated (Flag126)
2263 -- Present in generic packages and generic subprograms. Set if the unit
2264 -- is instantiated from somewhere in the extended main source unit. This
2265 -- flag is used to control warnings about the unit being uninstantiated.
2266 -- Also set in a package that is used as an actual for a generic package
2267 -- formal in an instantiation. Also set on a parent instance, in the
2268 -- instantiation of a child, which is implicitly declared in the parent.
2270 -- Is_Integer_Type (synthesized)
2271 -- Applies to all entities, true for integer types and subtypes
2273 -- Is_Interface (Flag186)
2274 -- Present in record types and subtypes. Set to indicate that the current
2275 -- entity corresponds with an abstract interface. Because abstract
2276 -- interfaces are conceptually a special kind of abstract tagged types
2277 -- we represent them by means of tagged record types and subtypes
2278 -- marked with this attribute. This allows us to reuse most of the
2279 -- compiler support for abstract tagged types to implement interfaces
2280 -- (Ada 2005: AI-251).
2282 -- Is_Internal (Flag17)
2283 -- Present in all entities. Set to indicate an entity created during
2284 -- semantic processing (e.g. an implicit type, or a temporary). The
2285 -- current uses of this flag are:
2287 -- 1) Internal entities (such as temporaries generated for the result
2288 -- of an inlined function call or dummy variables generated for the
2289 -- debugger). Set to indicate that they need not be initialized, even
2290 -- when scalars are initialized or normalized;
2292 -- 2) Predefined primitives of tagged types. Set to mark that they
2293 -- have specific properties: first they are primitives even if they
2294 -- are not defined in the type scope (the freezing point is not
2295 -- necessarily in the same scope), and second the predefined equality
2296 -- can be overridden by a user-defined equality, no body will be
2297 -- generated in this case.
2299 -- 3) Object declarations generated by the expander that are implicitly
2300 -- imported or exported so that they can be marked in Sprint output.
2302 -- 4) Internal entities in the list of primitives of tagged types that
2303 -- are used to handle secondary dispatch tables. These entities have
2304 -- also the attribute Interface_Alias.
2306 -- Is_Interrupt_Handler (Flag89)
2307 -- Present in procedures. Set if a pragma Interrupt_Handler applies
2308 -- to the procedure. The procedure must be parameterless, and on all
2309 -- targets except AAMP it must be a protected procedure.
2311 -- Is_Intrinsic_Subprogram (Flag64)
2312 -- Present in functions and procedures. It is set if a valid pragma
2313 -- Interface or Import is present for this subprogram specifying pragma
2314 -- Intrinsic. Valid means that the name and profile of the subprogram
2315 -- match the requirements of one of the recognized intrinsic subprograms
2316 -- (see package Sem_Intr for details). Note: the value of Convention for
2317 -- such an entity will be set to Convention_Intrinsic, but it is the
2318 -- setting of Is_Intrinsic_Subprogram, NOT simply having convention set
2319 -- to intrinsic, which causes intrinsic code to be generated.
2321 -- Is_Itype (Flag91)
2322 -- Present in all entities. Set to indicate that a type is an Itype,
2323 -- which means that the declaration for the type does not appear
2324 -- explicitly in the tree. Instead gigi will elaborate the type when it
2325 -- is first used. Has_Delayed_Freeze can be set for Itypes, and the
2326 -- meaning is that the first use (the one which causes the type to be
2327 -- defined) will be the freeze node. Note that an important restriction
2328 -- on Itypes is that the first use of such a type (the one that causes it
2329 -- to be defined) must be in the same scope as the type.
2331 -- Is_Known_Non_Null (Flag37)
2332 -- Present in all entities. Relevant (and can be set True) only for
2333 -- objects of an access type. It is set if the object is currently
2334 -- known to have a non-null value (meaning that no access checks
2335 -- are needed). The indication can for example come from assignment
2336 -- of an access parameter or an allocator whose value is known non-null.
2338 -- Note: this flag is set according to the sequential flow of the
2339 -- program, watching the current value of the variable. However,
2340 -- this processing can miss cases of changing the value of an aliased
2341 -- or constant object, so even if this flag is set, it should not
2342 -- be believed if the variable is aliased or volatile. It would
2343 -- be a little neater to avoid the flag being set in the first
2344 -- place in such cases, but that's trickier, and there is only
2345 -- one place that tests the value anyway.
2347 -- The flag is dynamically set and reset as semantic analysis and
2348 -- expansion proceeds. Its value is meaningless once the tree is
2349 -- fully constructed, since it simply indicates the last state.
2350 -- Thus this flag has no meaning to the back end.
2352 -- Is_Known_Null (Flag204)
2353 -- Present in all entities. Relevant (and can be set True) only for
2354 -- objects of an access type. It is set if the object is currently known
2355 -- to have a null value (meaning that a dereference will surely raise
2356 -- constraint error exception). The indication can come from an
2357 -- assignment or object declaration.
2359 -- The comments above about sequential flow and aliased and volatile for
2360 -- the Is_Known_Non_Null flag apply equally to the Is_Known_Null flag.
2362 -- Is_Known_Valid (Flag170)
2363 -- Present in all entities. Relevant for types (and subtype) and
2364 -- for objects (and enumeration literals) of a discrete type.
2366 -- The purpose of this flag is to implement the requirement stated
2367 -- in (RM 13.9.1(9-11)) which require that the use of possibly invalid
2368 -- values may not cause programs to become erroneous. See the function
2369 -- Checks.Expr_Known_Valid for further details. Note that the setting
2370 -- is conservative, in the sense that if the flag is set, it must be
2371 -- right. If the flag is not set, nothing is known about the validity.
2373 -- For enumeration literals, the flag is always set, since clearly
2374 -- an enumeration literal represents a valid value. Range checks
2375 -- where necessary will ensure that this valid value is appropriate.
2377 -- For objects, the flag indicates the state of knowledge about the
2378 -- current value of the object. This may be modified during expansion,
2379 -- and thus the final value is not relevant to gigi.
2381 -- For types and subtypes, the flag is set if all possible bit patterns
2382 -- of length Object_Size (i.e. Esize of the type) represent valid values
2383 -- of the type. In general for such tytpes, all values are valid, the
2384 -- only exception being the case where an object of the type has an
2385 -- explicit size that is greater than Object_Size.
2387 -- For non-discrete objects, the setting of the Is_Known_Valid flag is
2388 -- not defined, and is not relevant, since the considerations of the
2389 -- requirement in (RM 13.9.1(9-11)) do not apply.
2391 -- The flag is dynamically set and reset as semantic analysis and
2392 -- expansion proceeds. Its value is meaningless once the tree is
2393 -- fully constructed, since it simply indicates the last state.
2394 -- Thus this flag has no meaning to the back end.
2396 -- Is_Limited_Composite (Flag106)
2397 -- Present in all entities. Set for composite types that have a
2398 -- limited component. Used to enforce the rule that operations on
2399 -- the composite type that depend on the full view of the component
2400 -- do not become visible until the immediate scope of the composite
2401 -- type itself (RM 7.3.1 (5)).
2403 -- Is_Limited_Interface (Flag197)
2404 -- Present in record types and subtypes. True for interface types, if
2405 -- interface is declared limited, task, protected, or synchronized, or
2406 -- is derived from a limited interface.
2408 -- Is_Limited_Record (Flag25)
2409 -- Present in all entities. Set to true for record (sub)types if the
2410 -- record is declared to be limited. Note that this flag is not set
2411 -- simply because some components of the record are limited.
2413 -- Is_Local_Anonymous_Access (Flag194)
2414 -- Present in access types. Set for an anonymous access type to indicate
2415 -- that the type is created for a record component with an access
2416 -- definition, an array component, or a stand-alone object. Such
2417 -- anonymous types have an accessibility level equal to that of the
2418 -- declaration in which they appear, unlike the anonymous access types
2419 -- that are created for access parameters and access discriminants.
2421 -- Is_Machine_Code_Subprogram (Flag137)
2422 -- Present in subprogram entities. Set to indicate that the subprogram
2423 -- is a machine code subprogram (i.e. its body includes at least one
2424 -- code statement). Also indicates that all necessary semantic checks
2425 -- as required by RM 13.8(3) have been performed.
2427 -- Is_Modular_Integer_Type (synthesized)
2428 -- Applies to all entities. True if entity is a modular integer type
2430 -- Is_Non_Static_Subtype (Flag109)
2431 -- Present in all type and subtype entities. It is set in some (but not
2432 -- all) cases in which a subtype is known to be non-static. Before this
2433 -- flag was added, the computation of whether a subtype was static was
2434 -- entirely synthesized, by looking at the bounds, and the immediate
2435 -- subtype parent. However, this method does not work for some Itypes
2436 -- that have no parent set (and the only way to find the immediate
2437 -- subtype parent is to go through the tree). For now, this flay is set
2438 -- conservatively, i.e. if it is set then for sure the subtype is non-
2439 -- static, but if it is not set, then the type may or may not be static.
2440 -- Thus the test for a static subtype is that this flag is clear AND that
2441 -- the bounds are static AND that the parent subtype (if available to be
2442 -- tested) is static. Eventually we should make sure this flag is always
2443 -- set right, at which point, these comments can be removed, and the
2444 -- tests for static subtypes greatly simplified.
2446 -- Is_Null_Init_Proc (Flag178)
2447 -- Present in procedure entities. Set for generated init proc procedures
2448 -- (used to initialize composite types), if the code for the procedure
2449 -- is null (i.e. is a return and nothing else). Such null initialization
2450 -- procedures are generated in case some client is compiled using the
2451 -- Initialize_Scalars pragma, generating a call to this null procedure,
2452 -- but there is no need to call such procedures within a compilation
2453 -- unit, and this flag is used to suppress such calls.
2455 -- Is_Numeric_Type (synthesized)
2456 -- Applies to all entities, true for all numeric types and subtypes
2457 -- (integer, fixed, float).
2459 -- Is_Object (synthesized)
2460 -- Applies to all entities, true for entities representing objects,
2461 -- including generic formal parameters.
2463 -- Is_Obsolescent (Flag153)
2464 -- Present in all entities. Set for any entity for which a valid pragma
2465 -- Obsolescent applies.
2467 -- Is_Only_Out_Parameter (Flag226)
2468 -- Present in formal parameter entities. Set if this parameter is the
2469 -- only OUT parameter for this formal part. If there is more than one
2470 -- out parameter, or if there is some other IN OUT parameter then this
2471 -- flag is not set in any of them. Used in generation of warnings.
2473 -- Is_Optional_Parameter (Flag134)
2474 -- Present in parameter entities. Set if the parameter is specified as
2475 -- optional by use of a First_Optional_Parameter argument to one of the
2476 -- extended Import pragmas. Can only be set for OpenVMS versions of GNAT.
2478 -- Is_Ordinary_Fixed_Point_Type (synthesized)
2479 -- Applies to all entities, true for ordinary fixed point types and
2482 -- Is_Overriding_Operation (Flag39)
2483 -- Present in subprograms. Set if the subprogram is a primitive
2484 -- operation of a derived type, that overrides an inherited operation.
2486 -- Is_Package_Or_Generic_Package (synthesized)
2487 -- Applies to all entities. True for packages and generic packages.
2488 -- False for all other entities.
2490 -- Is_Package_Body_Entity (Flag160)
2491 -- Present in all entities. Set for entities defined at the top level
2492 -- of a package body. Used to control externally generated names.
2494 -- Is_Packed (Flag51) [implementation base type only]
2495 -- Present in all type entities. This flag is set only for record and
2496 -- array types which have a packed representation. There are three
2497 -- cases which cause packing:
2499 -- 1. Explicit use of pragma Pack for an array of package components
2500 -- 2. Explicit use of pragma Pack to pack a record
2501 -- 4. Setting Component_Size of an array to a bit-packable value
2502 -- 3. Indexing an array with a non-standard enumeration type.
2504 -- For records, Is_Packed is always set if Has_Pragma_Pack is set,
2505 -- and can also be set on its own in a derived type which inherited
2506 -- its packed status.
2508 -- For arrays, Is_Packed is set if an array is bit packed (i.e. the
2509 -- component size is known at compile time and is 1-7, 9-15 or 17-31),
2510 -- or if the array has one or more index types that are enumeration
2511 -- types with non-standard representations (in GNAT, we store such
2512 -- arrays compactly, using the Pos of the enumeration type value).
2514 -- As for the case of records, Is_Packed can be set on its own for a
2515 -- derived type, with the same dual before/after freeze meaning.
2516 -- Is_Packed can also be set as the result of an explicit component
2517 -- size clause that specifies an appropriate component size.
2519 -- In the bit packed array case, Is_Bit_Packed_Array will be set in
2520 -- the bit packed case once the array type is frozen.
2522 -- Before an array type is frozen, Is_Packed will always be set if
2523 -- Has_Pragma_Pack is set. Before the freeze point, it is not possible
2524 -- to know the component size, since the component type is not frozen
2525 -- until the array type is frozen. Thus Is_Packed for an array type
2526 -- before it is frozen means that packed is required. Then if it turns
2527 -- out that the component size is not suitable for bit packing, the
2528 -- Is_Packed flag gets turned off.
2530 -- Is_Packed_Array_Type (Flag138)
2531 -- Present in all entities. This flag is set on the entity for the type
2532 -- used to implement a packed array (either a modular type, or a subtype
2533 -- of Packed_Bytes{1,2,4} as appropriate). The flag is set if and only
2534 -- if the type appears in the Packed_Array_Type field of some other type
2535 -- entity. It is used by Gigi to activate the special processing for such
2536 -- types (unchecked conversions that would not otherwise be allowed are
2537 -- allowed for such types). If the Is_Packed_Array_Type flag is set in
2538 -- an entity, then the Original_Array_Type field of this entity points
2539 -- to the original array type for which this is the packed array type.
2541 -- Is_Potentially_Use_Visible (Flag9)
2542 -- Present in all entities. Set if entity is potentially use visible,
2543 -- i.e. it is defined in a package that appears in a currently active
2544 -- use clause (RM 8.4(8)). Note that potentially use visible entities
2545 -- are not necessarily use visible (RM 8.4(9-11)).
2547 -- Is_Preelaborated (Flag59)
2548 -- Present in all entities, set in E_Package and E_Generic_Package
2549 -- entities to which a pragma Preelaborate is applied, and also in
2550 -- all entities within such packages. Note that the fact that this
2551 -- flag is set does not necesarily mean that no elaboration code is
2552 -- generated for the package.
2554 -- Is_Primitive (Flag218)
2555 -- Present in overloadable entities and in generic subprograms. Set to
2556 -- indicate that this is a primitive operation of some type, which may
2557 -- be a tagged type or a non-tagged type. Used to verify overriding
2558 -- indicators in bodies.
2560 -- Is_Primitive_Wrapper (Flag195)
2561 -- Present in functions and procedures created by the expander to serve
2562 -- as an indirection mechanism to overriding primitives of concurrent
2563 -- types, entries and protected procedures.
2565 -- Is_Prival (synthesized)
2566 -- Applies to all entities, true for renamings of private protected
2567 -- components. Such entities appear as constants or variables.
2569 -- Is_Private_Composite (Flag107)
2570 -- Present in composite types that have a private component. Used to
2571 -- enforce the rule that operations on the composite type that depend
2572 -- on the full view of the component, do not become visible until the
2573 -- immediate scope of the composite type itself (7.3.1 (5)). Both this
2574 -- flag and Is_Limited_Composite are needed.
2576 -- Is_Private_Descendant (Flag53)
2577 -- Present in entities that can represent library units (packages,
2578 -- functions, procedures). Set if the library unit is itself a private
2579 -- child unit, or if it is the descendent of a private child unit.
2581 -- Is_Private_Primitive (Flag245)
2582 -- Present in subprograms. Set if the operation is a primitive of a
2583 -- tagged type (procedure or function dispatching on result) whose
2584 -- full view has not been seen. Used in particular for primitive
2585 -- subprograms of a synchronized type declared between the two views
2586 -- of the type, so that the wrapper built for such a subprogram can
2587 -- be given the proper signature.
2589 -- Is_Private_Type (synthesized)
2590 -- Applies to all entities, true for private types and subtypes,
2591 -- as well as for record with private types as subtypes
2593 -- Is_Protected_Component (synthesized)
2594 -- Applicable to all entities, true if the entity denotes a private
2595 -- component of a protected type.
2597 -- Is_Protected_Interface (synthesized)
2598 -- Present in types that are interfaces. True if interface is declared
2599 -- protected, or is derived from protected interfaces.
2601 -- Is_Protected_Type (synthesized)
2602 -- Applies to all entities, true for protected types and subtypes
2604 -- Is_Public (Flag10)
2605 -- Present in all entities. Set to indicate that an entity defined in
2606 -- one compilation unit can be referenced from other compilation units.
2607 -- If this reference causes a reference in the generated variable, for
2608 -- example in the case of a variable name, then Gigi will generate an
2609 -- appropriate external name for use by the linker.
2611 -- Is_Protected_Record_Type (synthesized)
2612 -- Applies to all entities, true if Is_Concurrent_Record_Type
2613 -- Corresponding_Concurrent_Type is a protected type.
2616 -- Present in all entities. Set in all entities of a unit to which a
2617 -- pragma Pure is applied, and also set for the entity of the unit
2618 -- itself. In addition, this flag may be set for any other functions
2619 -- or procedures that are known to be side effect free, so in the case
2620 -- of subprograms, the Is_Pure flag may be used by the optimizer to
2621 -- imply that it can assume freedom from side effects (other than those
2622 -- resulting from assignment to out parameters, or to objects designated
2623 -- by access parameters).
2625 -- Is_Pure_Unit_Access_Type (Flag189)
2626 -- Present in access type and subtype entities. Set if the type or
2627 -- subtype appears in a pure unit. Used to give an error message at
2628 -- freeze time if the access type has a storage pool.
2630 -- Is_RACW_Stub_Type (Flag244)
2631 -- Present in all types, true for the stub types generated for remote
2632 -- access-to-class-wide types.
2634 -- Is_Raised (Flag224)
2635 -- Present in exception entities. Set if the entity is referenced by a
2636 -- a raise statement.
2638 -- Is_Real_Type (synthesized)
2639 -- Applies to all entities, true for real types and subtypes
2641 -- Is_Record_Type (synthesized)
2642 -- Applies to all entities, true for record types and subtypes,
2643 -- includes class-wide types and subtypes (which are also records)
2645 -- Is_Remote_Call_Interface (Flag62)
2646 -- Present in all entities. Set in E_Package and E_Generic_Package
2647 -- entities to which a pragma Remote_Call_Interface is applied, and
2648 -- also on entities declared in the visible part of such a package.
2650 -- Is_Remote_Types (Flag61)
2651 -- Present in all entities. Set in E_Package and E_Generic_Package
2652 -- entities to which a pragma Remote_Types is applied, and also on
2653 -- entities declared in the visible part of the spec of such a package.
2655 -- Is_Renaming_Of_Object (Flag112)
2656 -- Present in all entities, set only for a variable or constant for
2657 -- which the Renamed_Object field is non-empty and for which the
2658 -- renaming is handled by the front end, by macro substitution of
2659 -- a copy of the (evaluated) name tree whereever the variable is used.
2661 -- Is_Return_Object (Flag209)
2662 -- Present in all object entities. True if the object is the return
2663 -- object of an extended_return_statement; False otherwise.
2665 -- Is_Scalar_Type (synthesized)
2666 -- Applies to all entities, true for scalar types and subtypes
2668 -- Is_Shared_Passive (Flag60)
2669 -- Present in all entities. Set in E_Package and E_Generic_Package
2670 -- entities to which a pragma Shared_Passive is applied, and also in
2671 -- all entities within such packages.
2673 -- Is_Standard_Character_Type (synthesized)
2674 -- Applies to all entities, true for types and subtypes whose root type
2675 -- is one of the standard character types (Character, Wide_Character,
2676 -- Wide_Wide_Character).
2678 -- Is_Statically_Allocated (Flag28)
2679 -- Present in all entities. This can only be set True for exception,
2680 -- variable, constant, and type/subtype entities. If the flag is set,
2681 -- then the variable or constant must be allocated statically rather
2682 -- than on the local stack frame. For exceptions, the meaning is that
2683 -- the exception data should be allocated statically (and indeed this
2684 -- flag is always set for exceptions, since exceptions do not have
2685 -- local scope). For a type, the meaning is that the type must be
2686 -- elaborated at the global level rather than locally. No type marked
2687 -- with this flag may depend on a local variable, or on any other type
2688 -- which does not also have this flag set to True. For a variable or
2689 -- or constant, if the flag is set, then the type of the object must
2690 -- either be declared at the library level, or it must also have the
2691 -- flag set (since to allocate the object statically, its type must
2692 -- also be elaborated globally).
2694 -- Is_String_Type (synthesized)
2695 -- Applies to all type entities. Determines if the given type is a
2696 -- string type, i.e. it is directly a string type or string subtype,
2697 -- or a string slice type, or an array type with one dimension and a
2698 -- component type that is a character type.
2700 -- Is_Subprogram (synthesized)
2701 -- Applies to all entities, true for function, procedure and operator
2704 -- Is_Synchronized_Interface (synthesized)
2705 -- Present in types that are interfaces. True if interface is declared
2706 -- synchronized, task, or protected, or is derived from a synchronized
2710 -- Present in E_Component and E_Constant entities. For regular tagged
2711 -- type this flag is set on the tag component (whose name is Name_uTag).
2712 -- For CPP_Class tagged types, this flag marks the pointer to the main
2713 -- vtable (i.e. the one to be extended by derivation).
2715 -- Is_Tagged_Type (Flag55)
2716 -- Present in all entities. Set for an entity for a tagged type.
2718 -- Is_Task_Interface (synthesized)
2719 -- Present in types that are interfaces. True if interface is declared as
2720 -- a task interface, or if it is derived from task interfaces.
2722 -- Is_Task_Record_Type (synthesized)
2723 -- Applies to all entities. True if Is_Concurrent_Record_Type
2724 -- Corresponding_Concurrent_Type is a task type.
2726 -- Is_Task_Type (synthesized)
2727 -- Applies to all entities. True for task types and subtypes
2729 -- Is_Thunk (Flag225)
2730 -- Present in all entities for subprograms (functions, procedures, and
2731 -- operators). True for subprograms that are thunks, that is small
2732 -- subprograms built by the expander for tagged types that cover
2733 -- interface types. At run-time thunks displace the pointer to the object
2734 -- (pointer named "this" in the C++ terminology) from a secondary
2735 -- dispatch table to the primary dispatch table associated with a given
2736 -- tagged type. Set by Expand_Interface Thunk and used by Expand_Call to
2737 -- handle extra actuals associated with accessibility level.
2739 -- Is_Trivial_Subprogram (Flag235)
2740 -- Present in all entities. Set in subprograms where either the body
2741 -- consists of a single null statement, or the first or only statement
2742 -- of the body raises an exception. This is used for suppressing certain
2743 -- warnings, see Sem_Ch6.Analyze_Subprogram_Body discussion for details.
2745 -- Is_True_Constant (Flag163)
2746 -- Present in all entities for constants and variables. Set in constants
2747 -- and variables which have an initial value specified but which are
2748 -- never assigned, partially or in the whole. For variables, it means
2749 -- that the variable was initialized but never modified, and hence can be
2750 -- treated as a constant by the code generator. For a constant, it means
2751 -- that the constant was not modified by generated code (e.g. to set a
2752 -- discriminant in an init proc). Assignments by user or generated code
2753 -- will reset this flag.
2755 -- Is_Type (synthesized)
2756 -- Applies to all entities, true for a type entity
2758 -- Is_Unchecked_Union (Flag117) [implementation base type only]
2759 -- Present in all entities. Set only in record types to which the
2760 -- pragma Unchecked_Union has been validly applied.
2762 -- Is_Underlying_Record_View (Flag246) [base type only]
2763 -- Present in all entities. Set only in record types that represent the
2764 -- underlying record view. This view is built for derivations of types
2765 -- with unknown discriminants; it is a record with the same structure
2766 -- as its corresponding record type, but whose parent is the full view
2767 -- of the parent in the original type extension.
2769 -- Is_Unsigned_Type (Flag144)
2770 -- Present in all types, but can be set only for discrete and fixed-point
2771 -- type and subtype entities. This flag is only valid if the entity is
2772 -- frozen. If set it indicates that the representation is known to be
2773 -- unsigned (i.e. that no negative values appear in the range). This is
2774 -- normally just a reflection of the lower bound of the subtype or base
2775 -- type, but there is one case in which the setting is non-obvious,
2776 -- namely the case of an unsigned subtype of a signed type from which
2777 -- a further subtype is obtained using variable bounds. This further
2778 -- subtype is still unsigned, but this cannot be determined by looking
2779 -- at its bounds or the bounds of the corresponding base type.
2781 -- Is_Valued_Procedure (Flag127)
2782 -- Present in procedure entities. Set if an Import_Valued_Procedure
2783 -- or Export_Valued_Procedure pragma applies to the procedure entity.
2785 -- Is_Visible_Child_Unit (Flag116)
2786 -- Present in compilation units that are child units. Once compiled,
2787 -- child units remain chained to the entities in the parent unit, and
2788 -- a separate flag must be used to indicate whether the names are
2789 -- visible by selected notation, or not.
2791 -- Is_Visible_Formal (Flag206)
2792 -- Present in all entities. Set for instances of the formals of a formal
2793 -- package. Indicates that the entity must be made visible in the body
2794 -- of the instance, to reproduce the visibility of the generic. This
2795 -- simplifies visibility settings in instance bodies.
2796 -- ??? confusion in above comments between being present and being set
2798 -- Is_VMS_Exception (Flag133)
2799 -- Present in all entities. Set only for exception entities where the
2800 -- exception was specified in an Import_Exception or Export_Exception
2801 -- pragma with the VMS option for Form. See description of these pragmas
2802 -- for details. This flag can only be set in OpenVMS versions of GNAT.
2804 -- Is_Volatile (Flag16)
2805 -- Present in all type entities, and also in constants, components and
2806 -- variables. Set if a pragma Volatile applies to the entity. Also set
2807 -- if pragma Shared or pragma Atomic applies to entity. In the case of
2808 -- private or incomplete types, this flag is set in both the private
2809 -- and full view. The flag is not set reliably on private subtypes,
2810 -- and is always retrieved from the base type (but this is not a base-
2811 -- type-only attribute because it applies to other entities). Note that
2812 -- the back end should use Treat_As_Volatile, rather than Is_Volatile
2813 -- to indicate code generation requirements for volatile variables.
2814 -- Similarly, any front end test which is concerned with suppressing
2815 -- optimizations on volatile objects should test Treat_As_Volatile
2816 -- rather than testing this flag.
2818 -- Is_Wrapper_Package (synthesized)
2819 -- Present in package entities. Indicates that the package has been
2820 -- created as a wrapper for a subprogram instantiation.
2822 -- Itype_Printed (Flag202)
2823 -- Present in all type and subtype entities. Set in Itypes if the Itype
2824 -- has been printed by Sprint. This is used to avoid printing an Itype
2827 -- Kill_Elaboration_Checks (Flag32)
2828 -- Present in all entities. Set by the expander to kill elaboration
2829 -- checks which are known not to be needed. Equivalent in effect to
2830 -- the use of pragma Suppress (Elaboration_Checks) for that entity
2831 -- except that the effect is permanent and cannot be undone by a
2832 -- subsequent pragma Unsuppress.
2834 -- Kill_Range_Checks (Flag33)
2835 -- Present in all entities. Equivalent in effect to the use of pragma
2836 -- Suppress (Range_Checks) for that entity except that the result is
2837 -- permanent and cannot be undone by a subsequent pragma Unsuppress.
2838 -- This is currently only used in one odd situation in Sem_Ch3 for
2839 -- record types, and it would be good to get rid of it???
2841 -- Kill_Tag_Checks (Flag34)
2842 -- Present in all entities. Set by the expander to kill elaboration
2843 -- checks which are known not to be needed. Equivalent in effect to
2844 -- the use of pragma Suppress (Tag_Checks) for that entity except
2845 -- that the result is permanent and cannot be undone by a subsequent
2846 -- pragma Unsuppress.
2848 -- Known_To_Have_Preelab_Init (Flag207)
2849 -- Present in all type and subtype entities. If set, then the type is
2850 -- known to have preelaborable initialization. In the case of a partial
2851 -- view of a private type, it is only possible for this to be set if a
2852 -- pragma Preelaborable_Initialization is given for the type. For other
2853 -- types, it is never set if the type does not have preelaborable
2854 -- initialization, it may or may not be set if the type does have
2855 -- preelaborable initialization.
2857 -- Last_Assignment (Node26)
2858 -- Present in entities for variables, and OUT or IN OUT formals. Set for
2859 -- a local variable or formal to point to the left side of an assignment
2860 -- statement assigning a value to the variable. Cleared if the value of
2861 -- the entity is referenced. Used to warn about dubious assignment
2862 -- statements whose value is not used.
2864 -- Last_Entity (Node20)
2865 -- Present in all entities which act as scopes to which a list of
2866 -- associated entities is attached (blocks, class subtypes and types,
2867 -- entries, functions, loops, packages, procedures, protected objects,
2868 -- record types and subtypes, private types, task types and subtypes).
2869 -- Points to the last entry in the list of associated entities chained
2870 -- through the Next_Entity field. Empty if no entities are chained.
2872 -- Last_Formal (synthesized)
2873 -- Applies to subprograms and subprogram types, and also in entries
2874 -- and entry families. Returns last formal of the subprogram or entry.
2875 -- The formals are the first entities declared in a subprogram or in
2876 -- a subprogram type (the designated type of an Access_To_Subprogram
2877 -- definition) or in an entry.
2879 -- Limited_View (Node23)
2880 -- Present in non-generic package entities that are not instances. Bona
2881 -- fide package with the limited-view list through the first_entity and
2882 -- first_private attributes. The elements of this list are the shadow
2883 -- entities created for the types and local packages that are declared
2884 -- in a package appearing in a limited_with clause (Ada 2005: AI-50217)
2886 -- Lit_Indexes (Node15)
2887 -- Present in enumeration types and subtypes. Non-empty only for the
2888 -- case of an enumeration root type, where it contains the entity for
2889 -- the generated indexes entity. See unit Exp_Imgv for full details of
2890 -- the nature and use of this entity for implementing the Image and
2891 -- Value attributes for the enumeration type in question.
2893 -- Lit_Strings (Node16)
2894 -- Present in enumeration types and subtypes. Non-empty only for the
2895 -- case of an enumeration root type, where it contains the entity for
2896 -- the literals string entity. See unit Exp_Imgv for full details of
2897 -- the nature and use of this entity for implementing the Image and
2898 -- Value attributes for the enumeration type in question.
2900 -- Low_Bound_Tested (Flag205)
2901 -- Present in all entities. Currently this can only be set True for
2902 -- formal parameter entries of a standard unconstrained one-dimensional
2903 -- array or string type. Indicates that an explicit test of the low bound
2904 -- of the formal appeared in the code, e.g. in a pragma Assert. If this
2905 -- flag is set, warnings about assuming the index low bound to be one
2908 -- Machine_Radix_10 (Flag84)
2909 -- Present in decimal types and subtypes, set if the Machine_Radix
2910 -- is 10, as the result of the specification of a machine radix
2911 -- representation clause. Note that it is possible for this flag
2912 -- to be set without having Has_Machine_Radix_Clause True. This
2913 -- happens when a type is derived from a type with a clause present.
2915 -- Master_Id (Node17)
2916 -- Present in access types and subtypes. Empty unless Has_Task is
2917 -- set for the designated type, in which case it points to the entity
2918 -- for the Master_Id for the access type master. Also set for access-to-
2919 -- limited-class-wide types whose root may be extended with task
2920 -- components, and for access-to-limited-interfaces because they can be
2921 -- used to reference tasks implementing such interface.
2923 -- Materialize_Entity (Flag168)
2924 -- Present in all entities. Set only for constant or renamed entities
2925 -- which should be materialized for debugging purposes. In the case of
2926 -- a constant, a memory location should be allocated containing the
2927 -- value. In the case of a renaming, a memory location containing the
2928 -- renamed address should be allocated.
2930 -- Mechanism (Uint8) (returned as Mechanism_Type)
2931 -- Present in functions and non-generic formal parameters. Indicates
2932 -- the mechanism to be used for the function return or for the formal
2933 -- parameter. See separate section on passing mechanisms. This field
2934 -- is also set (to the default value of zero) in a subprogram body
2935 -- entity but not used in this context.
2937 -- Modulus (Uint17) [base type only]
2938 -- Present in modular types. Contains the modulus. For the binary
2939 -- case, this will be a power of 2, but if Non_Binary_Modulus is
2940 -- set, then it will not be a power of 2.
2942 -- Must_Be_On_Byte_Boundary (Flag183)
2943 -- Present in entities for types and subtypes. Set if objects of
2944 -- the type must always be allocated on a byte boundary (more
2945 -- accurately a storage unit boundary). The front end checks that
2946 -- component clauses respect this rule, and the back end ensures
2947 -- that record packing does not violate this rule. Currently the
2948 -- flag is set only for packed arrays longer than 64 bits where
2949 -- the component size is not a power of 2.
2951 -- Must_Have_Preelab_Init (Flag208)
2952 -- Present in entities for types and subtypes. Set in the full type of a
2953 -- private type or subtype if a pragma Has_Preelaborable_Initialization
2954 -- is present for the private type. Used to check that the full type has
2955 -- preelaborable initialization at freeze time (this has to be deferred
2956 -- to the freeze point because of the rule about overriding Initialize).
2958 -- Needs_Debug_Info (Flag147)
2959 -- Present in all entities. Set if the entity requires normal debugging
2960 -- information to be generated. This is true of all entities that have
2961 -- Comes_From_Source set, and also transitively for entities associated
2962 -- with such components (e.g. their types). It is true for all entities
2963 -- in Debug_Generated_Code mode (-gnatD switch). This is the flag that
2964 -- the back end should check to determine whether or not to generate
2965 -- debugging information for an entity. Note that callers should always
2966 -- use Sem_Util.Set_Debug_Info_Needed, rather than Set_Needs_Debug_Info,
2967 -- so that the flag is set properly on subsidiary entities.
2969 -- Needs_No_Actuals (Flag22)
2970 -- Present in callable entities (subprograms, entries, access to
2971 -- subprograms) which can be called without actuals because all of
2972 -- their formals (if any) have default values. This flag simplifies the
2973 -- resolution of the syntactic ambiguity involving a call to these
2974 -- entities when the return type is an array type, and a call can be
2975 -- interpreted as an indexing of the result of the call. It is also
2976 -- used to resolve various cases of entry calls.
2978 -- Never_Set_In_Source (Flag115)
2979 -- Present in all entities, but can be set only for variables and
2980 -- parameters. This flag is set if the object is never assigned a value
2981 -- in user source code, either by assignment or by being used as an out
2982 -- or in out parameter. Note that this flag is not reset from using an
2983 -- initial value, so if you want to test for this case as well, test the
2984 -- Has_Initial_Value flag also.
2986 -- This flag is only for the purposes of issuing warnings, it must not
2987 -- be used by the code generator to indicate that the variable is in
2988 -- fact a constant, since some assignments in generated code do not
2989 -- count (for example, the call to an init proc to assign some but
2990 -- not all of the fields in a partially initialized record). The code
2991 -- generator should instead use the flag Is_True_Constant.
2993 -- For the purposes of this warning, the default assignment of
2994 -- access variables to null is not considered the assignment of
2995 -- of a value (so the warning can be given for code that relies
2996 -- on this initial null value, when no other value is ever set).
2998 -- In variables and out parameters, if this flag is set after full
2999 -- processing of the corresponding declarative unit, it indicates that
3000 -- the variable or parameter was never set, and a warning message can
3003 -- Note: this flag is initially set, and then cleared on encountering
3004 -- any construct that might conceivably legitimately set the value.
3005 -- Thus during the analysis of a declarative region and its associated
3006 -- statement sequence, the meaning of the flag is "not set yet", and
3007 -- once this analysis is complete the flag means "never assigned".
3009 -- Note: for variables appearing in package declarations, this flag
3010 -- is never set. That is because there is no way to tell if some
3011 -- client modifies the variable (or in the case of variables in the
3012 -- private part, if some child unit modifies the variables).
3014 -- Note: in the case of renamed objects, the flag must be set in the
3015 -- ultimate renamed object. Clients noting a possible modification
3016 -- should use the Note_Possible_Modification procedure in Sem_Util
3017 -- rather than Set_Never_Set_In_Source precisely to deal properly with
3018 -- the renaming possibility.
3020 -- Next_Component (synthesized)
3021 -- Applies to record components. Returns the next component by following
3022 -- the chain of declared entities until one is found which corresponds to
3023 -- a component (Ekind is E_Component). Any internal types generated from
3024 -- the subtype indications of the record components are skipped. Returns
3025 -- Empty if no more components.
3027 -- Next_Component_Or_Discriminant (synthesized)
3028 -- Similar to Next_Component, but includes components and discriminants
3029 -- so the input can have either E_Component or E_Discriminant, and the
3030 -- same is true for the result. Returns Empty if no more components or
3031 -- discriminants in the record.
3033 -- Next_Discriminant (synthesized)
3034 -- Applies to discriminants returned by First/Next_Discriminant.
3035 -- Returns the next language-defined (ie: perhaps non-girder)
3036 -- discriminant by following the chain of declared entities as long as
3037 -- the kind of the entity corresponds to a discriminant. Note that the
3038 -- discriminants might be the only components of the record.
3039 -- Returns Empty if there are no more.
3041 -- Next_Entity (Node2)
3042 -- Present in all entities. The entities of a scope are chained, with
3043 -- the head of the list being in the First_Entity field of the scope
3044 -- entity. All entities use the Next_Entity field as a forward pointer
3045 -- for this list, with Empty indicating the end of the list. Since this
3046 -- field is in the base part of the entity, the access routines for this
3047 -- field are in Sinfo.
3049 -- Next_Formal (synthesized)
3050 -- Applies to the entity for a formal parameter. Returns the next
3051 -- formal parameter of the subprogram or subprogram type. Returns
3052 -- Empty if there are no more formals.
3054 -- Next_Formal_With_Extras (synthesized)
3055 -- Applies to the entity for a formal parameter. Returns the next
3056 -- formal parameter of the subprogram or subprogram type. Returns
3057 -- Empty if there are no more formals. The list returned includes
3058 -- all the extra formals (see description of Extra_Formal field)
3060 -- Next_Index (synthesized)
3061 -- Applies to array types and subtypes and to string types and
3062 -- subtypes. Yields the next index. The first index is obtained by
3063 -- using the First_Index attribute, and then subsequent indexes are
3064 -- obtained by applying Next_Index to the previous index. Empty is
3065 -- returned to indicate that there are no more indexes. Note that
3066 -- unlike most attributes in this package, Next_Index applies to
3067 -- nodes for the indexes, not to entities.
3069 -- Next_Inlined_Subprogram (Node12)
3070 -- Present in subprograms. Used to chain inlined subprograms used in
3071 -- the current compilation, in the order in which they must be compiled
3072 -- by Gigi to insure that all inlinings are performed.
3074 -- Next_Literal (synthesized)
3075 -- Applies to enumeration literals, returns the next literal, or
3076 -- Empty if applied to the last literal. This is actually a synonym
3077 -- for Next, but its use is preferred in this context.
3079 -- Non_Binary_Modulus (Flag58) [base type only]
3080 -- Present in all subtype and type entities. Set for modular integer
3081 -- types if the modulus value is other than a power of 2.
3083 -- Non_Limited_View (Node17)
3084 -- Present in incomplete types that are the shadow entities created
3085 -- when analyzing a limited_with_clause (Ada 2005: AI-50217). Points to
3086 -- the defining entity in the original declaration.
3088 -- Nonzero_Is_True (Flag162) [base type only]
3089 -- Present in enumeration types. True if any non-zero value is to be
3090 -- interpreted as true. Currently this is set true for derived Boolean
3091 -- types which have a convention of C, C++ or Fortran.
3093 -- No_Pool_Assigned (Flag131) [root type only] Present in access types.
3094 -- Set if a storage size clause applies to the variable with a static
3095 -- expression value of zero. This flag is used to generate errors if any
3096 -- attempt is made to allocate or free an instance of such an access
3097 -- type. This is set only in the root type, since derived types must
3098 -- have the same pool.
3100 -- No_Return (Flag113)
3101 -- Present in all entities. Always false except in the case of procedures
3102 -- and generic procedures for which a pragma No_Return is given.
3104 -- Normalized_First_Bit (Uint8)
3105 -- Present in components and discriminants. Indicates the normalized
3106 -- value of First_Bit for the component, i.e. the offset within the
3107 -- lowest addressed storage unit containing part or all of the field.
3108 -- Set to No_Uint if no first bit position is assigned yet.
3110 -- Normalized_Position (Uint14)
3111 -- Present in components and discriminants. Indicates the normalized
3112 -- value of Position for the component, i.e. the offset in storage
3113 -- units from the start of the record to the lowest addressed storage
3114 -- unit containing part or all of the field.
3116 -- Normalized_Position_Max (Uint10)
3117 -- Present in components and discriminants. For almost all cases, this
3118 -- is the same as Normalized_Position. The one exception is for the case
3119 -- of a discriminated record containing one or more arrays whose length
3120 -- depends on discriminants. In this case, the Normalized_Position_Max
3121 -- field represents the maximum possible value of Normalized_Position
3122 -- assuming min/max values for discriminant subscripts in all fields.
3123 -- This is used by Layout in front end layout mode to properly computed
3124 -- the maximum size such records (needed for allocation purposes when
3125 -- there are default discriminants, and also for the 'Size value).
3127 -- No_Strict_Aliasing (Flag136) [base type only]
3128 -- Present in access types. Set to direct the back end to avoid any
3129 -- optimizations based on an assumption about the aliasing status of
3130 -- objects designated by the access type. For the case of the gcc
3131 -- back end, the effect is as though all references to objects of
3132 -- the type were compiled with -fno-strict-aliasing. This flag is
3133 -- set if an unchecked conversion with the access type as a target
3134 -- type occurs in the same source unit as the declaration of the
3135 -- access type, or if an explicit pragma No_Strict_Aliasing applies.
3137 -- Number_Dimensions (synthesized)
3138 -- Applies to array types and subtypes. Returns the number of dimensions
3139 -- of the array type or subtype as a value of type Pos.
3141 -- Number_Entries (synthesized)
3142 -- Applies to concurrent types. Returns the number of entries that are
3143 -- declared within the task or protected definition for the type.
3145 -- Number_Formals (synthesized)
3146 -- Applies to subprograms and subprogram types. Yields the number of
3147 -- formals as a value of type Pos.
3149 -- OK_To_Reference (Flag249)
3150 -- Present in all entities for types and subtypes. If set it indicates
3151 -- that a naked reference to the type is permitted within an expression
3152 -- that is being analyzed or preanalyed (for example, a type name may
3153 -- be referenced within the Invariant aspect expression for the type).
3155 -- OK_To_Rename (Flag247)
3156 -- Present only in entities for variables. If this flag is set, it
3157 -- means that if the entity is used as the initial value of an object
3158 -- declaration, the object declaration can be safely converted into a
3159 -- renaming to avoid an extra copy. This is set for variables which are
3160 -- generated by the expander to hold the result of evaluating some
3161 -- expression. Most notably, the local variables used to store the result
3162 -- of concatenations are so marked (see Exp_Ch4.Expand_Concatenate). It
3163 -- is only worth setting this flag for composites, since for primitive
3164 -- types, it is cheaper to do the copy.
3166 -- OK_To_Reorder_Components (Flag239) [base type only]
3167 -- Present in record types. Set if the back end is permitted to reorder
3168 -- the components. If not set, the record must be layed out in the order
3169 -- in which the components are declared textually. Currently this flag
3170 -- can only be set by debug switches.
3172 -- Optimize_Alignment_Space (Flag241)
3173 -- A flag present in type, subtype, variable, and constant entities. This
3174 -- flag records that the type or object is to be layed out in a manner
3175 -- consistent with Optimize_Alignment (Space) mode. The compiler and
3176 -- binder ensure a consistent view of any given type or object. If pragma
3177 -- Optimize_Alignment (Off) mode applies to the type/object, then neither
3178 -- of the flags Optimize_Alignment_Space/Optimize_Alignment_Time is set.
3180 -- Optimize_Alignment_Time (Flag242)
3181 -- A flag present in type, subtype, variable, and constant entities. This
3182 -- flag records that the type or object is to be layed out in a manner
3183 -- consistent with Optimize_Alignment (Time) mode. The compiler and
3184 -- binder ensure a consistent view of any given type or object. If pragma
3185 -- Optimize_Alignment (Off) mode applies to the type/object, then neither
3186 -- of the flags Optimize_Alignment_Space/Optimize_Alignment_Time is set.
3188 -- Original_Array_Type (Node21)
3189 -- Present in modular types and array types and subtypes. Set only
3190 -- if the Is_Packed_Array_Type flag is set, indicating that the type
3191 -- is the implementation type for a packed array, and in this case it
3192 -- points to the original array type for which this is the packed
3193 -- array implementation type.
3195 -- Original_Record_Component (Node22)
3196 -- Present in components, including discriminants. The usage depends
3197 -- on whether the record is a base type and whether it is tagged.
3199 -- In base tagged types:
3200 -- When the component is inherited in a record extension, it points
3201 -- to the original component (the entity of the ancestor component
3202 -- which is not itself inherited) otherwise it points to itself.
3203 -- Gigi uses this attribute to implement the automatic dereference in
3204 -- the extension and to apply the transformation:
3206 -- Rec_Ext.Comp -> Rec_Ext.Parent. ... .Parent.Comp
3208 -- In base non-tagged types:
3209 -- Always points to itself except for non-girder discriminants, where
3210 -- it points to the girder discriminant it renames.
3212 -- In subtypes (tagged and untagged):
3213 -- Points to the component in the base type.
3215 -- Overlays_Constant (Flag243)
3216 -- Present in all entities. Set only for a variable for which there is
3217 -- an address clause which causes the variable to overlay a constant.
3219 -- Overridden_Operation (Node26)
3220 -- Present in subprograms. For overriding operations, points to the
3221 -- user-defined parent subprogram that is being overridden.
3223 -- Package_Instantiation (Node26)
3224 -- Present in packages and generic packages. When present, this field
3225 -- references an N_Package_Instantiation node associated with an
3226 -- instantiated package. In the case where the referenced node has
3227 -- been rewritten to an N_Package_Specification, the instantiation
3228 -- node is available from the Original_Node field of the package spec
3229 -- node. This is currently not guaranteed to be set in all cases, but
3230 -- when set, the field is used in Get_Package_Instantiation_Node as
3231 -- one of the means of obtaining the instantiation node. Eventually
3232 -- it should be set in all cases, including package entities associated
3233 -- with formal packages. ???
3235 -- Packed_Array_Type (Node23)
3236 -- Present in array types and subtypes, including the string literal
3237 -- subtype case, if the corresponding type is packed (either bit packed
3238 -- or packed to eliminate holes in non-contiguous enumeration type index
3239 -- types). References the type used to represent the packed array, which
3240 -- is either a modular type for short static arrays, or an array of
3241 -- System.Unsigned. Note that in some situations (internal types, and
3242 -- references to fields of variant records), it is not always possible
3243 -- to construct this type in advance of its use. If Packed_Array_Type
3244 -- is empty, then the necessary type is declared on the fly for each
3245 -- reference to the array.
3247 -- Parameter_Mode (synthesized)
3248 -- Applies to formal parameter entities. This is a synonym for Ekind,
3249 -- used when obtaining the formal kind of a formal parameter (the result
3250 -- is one of E_[In/Out/In_Out]_Parameter)
3252 -- Parent_Subtype (Node19) [base type only]
3253 -- Present in E_Record_Type. Set only for derived tagged types, in which
3254 -- case it points to the subtype of the parent type. This is the type
3255 -- that is used as the Etype of the _parent field.
3257 -- Postcondition_Proc (Node8)
3258 -- Present only in procedure entities, saves the entity of the generated
3259 -- postcondition proc if one is present, otherwise is set to Empty. Used
3260 -- to generate the call to this procedure in case the expander inserts
3261 -- implicit return statements.
3263 -- PPC_Wrapper (Node25)
3264 -- Present in entries and entry families. Set only if pre- or post-
3265 -- conditions are present. The precondition_wrapper body is the original
3266 -- entry call, decorated with the given precondition for the entry.
3268 -- Primitive_Operations (synthesized)
3269 -- Present in concurrent types, tagged record types and subtypes, tagged
3270 -- private types and tagged incomplete types. For concurrent types whose
3271 -- Corresponding_Record_Type (CRT) is available, returns the list of
3272 -- Direct_Primitive_Operations of its CRT; otherwise returns No_Elist.
3273 -- For all the other types returns the Direct_Primitive_Operations.
3275 -- Predicate_Function (synthesized)
3276 -- Present in all types. Set for types for which (Has_Predicates is True)
3277 -- and for which a predicate procedure has been built that tests that the
3278 -- specified predicates are True. Contains the entity for the function
3279 -- which takes a single argument of the given type, and returns True if
3280 -- the predicate holds and False if it does not.
3282 -- Note: the reason this is marked as a synthesized attribute is that the
3283 -- way this is stored is as an element of the Subprograms_For_Type field.
3286 -- Present in private components of protected types. Refers to the entity
3287 -- of the component renaming declaration generated inside protected
3288 -- subprograms, entries or barrier functions.
3290 -- Prival_Link (Node20)
3291 -- Present in constants and variables which rename private components of
3292 -- protected types. Set to the original private component.
3294 -- Private_Dependents (Elist18)
3295 -- Present in private (sub)types. Records the subtypes of the private
3296 -- type, derivations from it, and records and arrays with components
3297 -- dependent on the type.
3299 -- The subtypes are traversed when installing and deinstalling (the full
3300 -- view of) a private type in order to ensure correct view of the
3303 -- Used in similar fashion for incomplete types: holds list of subtypes
3304 -- of these incomplete types that have discriminant constraints. The
3305 -- full views of these subtypes are constructed when the full view of
3306 -- the incomplete type is processed.
3308 -- In addition, if the incomplete type is the designated type in an
3309 -- access definition for an access parameter, the operation may be
3310 -- a dispatching primitive operation, which is only known when the full
3311 -- declaration of the type is seen. Subprograms that have such an
3312 -- access parameter are also placed in the list of private_dependents.
3314 -- Private_View (Node22)
3315 -- For each private type, three entities are allocated, the private view,
3316 -- the full view, and the shadow entity. The shadow entity contains a
3317 -- copy of the private view and is used for restoring the proper private
3318 -- view after a region in which the full view is visible (and is copied
3319 -- into the entity normally used for the private view during this period
3320 -- of visibility). The Private_View field is self-referential when the
3321 -- private view lives in its normal entity, but in the copy that is made
3322 -- in the shadow entity, it points to the proper location in which to
3323 -- restore the private view saved in the shadow.
3325 -- Protected_Formal (Node22)
3326 -- Present in formal parameters (in, in out and out parameters). Used
3327 -- only for formals of protected operations. References corresponding
3328 -- formal parameter in the unprotected version of the operation that
3329 -- is created during expansion.
3331 -- Protected_Body_Subprogram (Node11)
3332 -- Present in protected operations. References the entity for the
3333 -- subprogram which implements the body of the operation.
3335 -- Protection_Object (Node23)
3336 -- Applies to protected entries, entry families and subprograms. Denotes
3337 -- the entity which is used to rename the _object component of protected
3340 -- Reachable (Flag49)
3341 -- Present in labels. The flag is set over the range of statements in
3342 -- which a goto to that label is legal.
3344 -- Referenced (Flag156)
3345 -- Present in all entities. Set if the entity is referenced, except for
3346 -- the case of an appearance of a simple variable that is not a renaming
3347 -- as the left side of an assignment in which case Referenced_As_LHS is
3348 -- set instead, or a similar appearance as an out parameter actual, in
3349 -- which case Referenced_As_Out_Parameter is set.
3351 -- Referenced_As_LHS (Flag36):
3352 -- Present in all entities. This flag is set instead of Referenced if a
3353 -- simple variable that is not a renaming appears as the left side of an
3354 -- assignment. The reason we distinguish this kind of reference is that
3355 -- we have a separate warning for variables that are only assigned and
3358 -- Referenced_As_Out_Parameter (Flag227):
3359 -- Present in all entities. This flag is set instead of Referenced if a
3360 -- simple variable that is not a renaming appears as an actual for an out
3361 -- formal. The reason we distinguish this kind of reference is that
3362 -- we have a separate warning for variables that are only assigned and
3363 -- never read, and out parameters are a special case.
3365 -- Register_Exception_Call (Node20)
3366 -- Present in exception entities. When an exception is declared,
3367 -- a call is expanded to Register_Exception. This field points to
3368 -- the expanded N_Procedure_Call_Statement node for this call. It
3369 -- is used for Import/Export_Exception processing to modify the
3370 -- register call to make appropriate entries in the special tables
3371 -- used for handling these pragmas at runtime.
3373 -- Related_Array_Object (Node19)
3374 -- Present in array types and subtypes. Used only for the base type
3375 -- and subtype created for an anonymous array object. Set to point
3376 -- to the entity of the corresponding array object. Currently used
3377 -- only for type-related error messages.
3379 -- Related_Expression (Node24)
3380 -- Present in variables and types. Set only for internally generated
3381 -- entities, where it may be used to denote the source expression whose
3382 -- elaboration created the variable declaration. If set, it is used
3383 -- for generating clearer messages from CodePeer.
3385 -- Shouldn't it also be used for the same purpose in errout? It seems
3386 -- odd to have two mechanisms here???
3388 -- Related_Instance (Node15)
3389 -- Present in the wrapper packages created for subprogram instances.
3390 -- The internal subprogram that implements the instance is inside the
3391 -- wrapper package, but for debugging purposes its external symbol
3392 -- must correspond to the name and scope of the related instance.
3394 -- Related_Type (Node27)
3395 -- Present in components, constants and variables. Set when there is an
3396 -- associated dispatch table to point to entities containing primary or
3397 -- secondary tags. Not set in the _tag component of record types.
3399 -- Relative_Deadline_Variable (Node26) [implementation base type only]
3400 -- Present in task type entities. This flag is set if a valid and
3401 -- effective pragma Relative_Deadline applies to the base type. Points
3402 -- to the entity for a variable that is created to hold the value given
3403 -- in a Relative_Deadline pragma for a task type.
3405 -- Renamed_Entity (Node18)
3406 -- Present in exceptions, packages, subprograms and generic units. Set
3407 -- for entities that are defined by a renaming declaration. Denotes the
3408 -- renamed entity, or transitively the ultimate renamed entity if
3409 -- there is a chain of renaming declarations. Empty if no renaming.
3411 -- Renamed_In_Spec (Flag231)
3413 -- Present in package entities. If a package renaming occurs within
3414 -- a package spec, then this flag is set on the renamed package. The
3415 -- purpose is to prevent a warning about unused entities in the renamed
3416 -- package. Such a warning would be inappropriate since clients of the
3417 -- package can see the entities in the package via the renaming.
3419 -- Renamed_Object (Node18)
3420 -- Present in all objects (constants, variables, components, formal
3421 -- parameters, generic formal parameters, and loop parameters).
3422 -- ??? Present in discriminants?
3423 -- Set non-Empty if the object was declared by a renaming declaration,
3424 -- in which case it references the tree node for the name of the renamed
3425 -- object. This is only possible for the variable and constant cases.
3426 -- For formal parameters, this field is used in the course of inline
3427 -- expansion, to map the formals of a subprogram into the corresponding
3428 -- actuals. For formals of a task entry, it denotes the local renaming
3429 -- that replaces the actual within the accept statement. The field is
3430 -- Empty otherwise (it is always empty for loop parameters).
3432 -- Renaming_Map (Uint9)
3433 -- Present in generic subprograms, generic packages, and their
3434 -- instances. Also present in the instances of the corresponding
3435 -- bodies. Denotes the renaming map (generic entities => instance
3436 -- entities) used to construct the instance by givin an index into
3437 -- the tables used to represent these maps. See Sem_Ch12 for further
3438 -- details. The maps for package instances are also used when the
3439 -- instance is the actual corresponding to a formal package.
3441 -- Requires_Overriding (Flag213)
3442 -- Present in all subprograms and entries. Set for subprograms that
3443 -- require overriding as defined by RM-2005-3.9.3(6/2). Note that this
3444 -- is True only for implicitly declare subprograms; it is not set on the
3445 -- parent type's subprogram. See also Is_Abstract_Subprogram.
3447 -- Return_Present (Flag54)
3448 -- Present in function and generic function entities. Set if the
3449 -- function contains a return statement (used for error checking).
3450 -- This flag can also be set in procedure and generic procedure
3451 -- entities (for convenience in setting it), but is only tested
3452 -- for the function case.
3454 -- Return_Applies_To (Node8)
3455 -- Present in E_Return_Statement. Points to the entity representing
3456 -- the construct to which the return statement applies, as defined in
3457 -- RM-6.5(4/2). Note that a (simple) return statement within an
3458 -- extended_return_statement applies to the extended_return_statement,
3459 -- even though it causes the whole function to return.
3461 -- Returns_By_Ref (Flag90)
3462 -- Present in function entities, to indicate that the function
3463 -- returns the result by reference, either because its return type is a
3464 -- by-reference-type or because it uses explicitly the secondary stack.
3466 -- Reverse_Bit_Order (Flag164) [base type only]
3467 -- Present in all record type entities. Set if a valid pragma an
3468 -- attribute representation clause for Bit_Order has reversed the order
3469 -- of bits from the default value. When this flag is set, a component
3470 -- clause must specify a set of bits entirely contained in a single
3471 -- storage unit (Ada 95) or a single machine scalar (see Ada 2005
3472 -- AI-133), or must occupy in integral number of storage units.
3475 -- Present in all type and subtype entities. Contains the value of
3476 -- type'Size as defined in the RM. See also the Esize field and
3477 -- and the description on "Handling of Type'Size Values". A value
3478 -- of zero in this field for a non-discrete type means that
3479 -- the front end has not yet determined the size value. For the
3480 -- case of a discrete type, this field is always set by the front
3481 -- end and zero is a legitimate value for a type with one value.
3483 -- Root_Type (synthesized)
3484 -- Applies to all type entities. For class-wide types, return the root
3485 -- type of the class covered by the CW type, otherwise returns the
3486 -- ultimate derivation ancestor of the given type. This function
3487 -- preserves the view, i.e. the Root_Type of a partial view is the
3488 -- partial view of the ultimate ancestor, the Root_Type of a full view
3489 -- is the full view of the ultimate ancestor. Note that this function
3490 -- does not correspond exactly to the use of root type in the RM, since
3491 -- in the RM root type applies to a class of types, not to a type.
3493 -- Scalar_Range (Node20)
3494 -- Present in all scalar types (including modular types, where the
3495 -- bounds are 0 .. modulus - 1). References a node in the tree that
3496 -- contains the bounds for the range. Note that this information
3497 -- could be obtained by rummaging around the tree, but it is more
3498 -- convenient to have it immediately at hand in the entity. The
3499 -- contents of Scalar_Range can either be an N_Subtype_Indication
3500 -- node (with a constraint), or a Range node, but not a simple
3501 -- subtype reference (a subtype is converted into a range).
3503 -- Scale_Value (Uint15)
3504 -- Present in decimal fixed-point types and subtypes. Contains the scale
3505 -- for the type (i.e. the value of type'Scale = the number of decimal
3506 -- digits after the decimal point).
3509 -- Present in all entities. Points to the entity for the scope (block,
3510 -- loop, subprogram, package etc.) in which the entity is declared.
3511 -- Since this field is in the base part of the entity node, the access
3512 -- routines for this field are in Sinfo. Note that for a child package,
3513 -- the Scope will be the parent package, and for a non-child package,
3514 -- the Scope will be Standard.
3516 -- Scope_Depth (synthesized)
3517 -- Applies to program units, blocks, concurrent types and entries, and
3518 -- also to record types, i.e. to any entity that can appear on the scope
3519 -- stack. Yields the scope depth value, which for those entities other
3520 -- than records is simply the scope depth value, for record entities, it
3521 -- is the Scope_Depth of the record scope.
3523 -- Scope_Depth_Value (Uint22)
3524 -- Present in program units, blocks, concurrent types, and entries.
3525 -- Indicates the number of scopes that statically enclose the declaration
3526 -- of the unit or type. Library units have a depth of zero. Note that
3527 -- record types can act as scopes but do NOT have this field set (see
3528 -- Scope_Depth above)
3530 -- Scope_Depth_Set (synthesized)
3531 -- Applies to a special predicate function that returns a Boolean value
3532 -- indicating whether or not the Scope_Depth field has been set. It is
3533 -- needed, since returns an invalid value in this case!
3535 -- Sec_Stack_Needed_For_Return (Flag167)
3536 -- Present in scope entities (blocks, functions, procedures, tasks,
3537 -- entries). Set to True when secondary stack is used to hold the
3538 -- returned value of a function and thus should not be released on
3541 -- Shadow_Entities (List14)
3542 -- Present in package and generic package entities. Points to a list
3543 -- of entities that correspond to private types. For each private type
3544 -- a shadow entity is created that holds a copy of the private view.
3545 -- In regions of the program where the full views of these private
3546 -- entities are visible, the full view is copied into the entity that
3547 -- is normally used to hold the private view, but the shadow entity
3548 -- copy is unchanged. The shadow entities are then used to restore the
3549 -- original private views at the end of the region. This list is a
3550 -- standard format list (i.e. First (Shadow_Entities) is the first
3551 -- entry and subsequent entries are obtained using Next.
3553 -- Shared_Var_Procs_Instance (Node22)
3554 -- Present in variables. Set non-Empty only if Is_Shared_Passive is
3555 -- set, in which case this is the entity for the associated instance of
3556 -- System.Shared_Storage.Shared_Var_Procs. See Exp_Smem for full details.
3558 -- Size_Check_Code (Node19)
3559 -- Present in constants and variables. Normally Empty. Set if code is
3560 -- generated to check the size of the object. This field is used to
3561 -- suppress this code if a subsequent address clause is encountered.
3563 -- Size_Clause (synthesized)
3564 -- Applies to all entities. If a size clause is present in the rep
3565 -- item chain for an entity then the attribute definition clause node
3566 -- for the size clause is returned. Otherwise Size_Clause returns Empty
3567 -- if no item is present. Usually this is only meaningful if the flag
3568 -- Has_Size_Clause is set. This is because when the representation item
3569 -- chain is copied for a derived type, it can inherit a size clause that
3570 -- is not applicable to the entity.
3572 -- Size_Depends_On_Discriminant (Flag177)
3573 -- Present in all entities for types and subtypes. Indicates that the
3574 -- size of the type depends on the value of one or more discriminants.
3575 -- Currently, this flag is only set in front end layout mode for arrays
3576 -- which have one or more bounds depending on a discriminant value.
3578 -- Size_Known_At_Compile_Time (Flag92)
3579 -- Present in all entities for types and subtypes. Indicates that the
3580 -- size of objects of the type is known at compile time. This flag is
3581 -- used to optimize some generated code sequences, and also to enable
3582 -- some error checks (e.g. disallowing component clauses on variable
3583 -- length objects). It is set conservatively (i.e. if it is True, the
3584 -- size is certainly known at compile time, if it is False, then the
3585 -- size may or may not be known at compile time, but the code will
3586 -- assume that it is not known).
3588 -- Small_Value (Ureal21)
3589 -- Present in fixed point types. Points to the universal real for the
3590 -- Small of the type, either as given in a representation clause, or
3591 -- as computed (as a power of two) by the compiler.
3593 -- Spec_Entity (Node19)
3594 -- Present in package body entities. Points to corresponding package
3595 -- spec entity. Also present in subprogram body parameters in the
3596 -- case where there is a separate spec, where this field references
3597 -- the corresponding parameter entities in the spec.
3599 -- Spec_PPC_List (Node24)
3600 -- Present in entries, and in subprogram and generic subprogram entities.
3601 -- Points to a list of Precondition and Postcondition pragma nodes for
3602 -- preconditions and postconditions declared in the spec. The last pragma
3603 -- encountered is at the head of this list, so it is in reverse order of
3604 -- textual appearance. Note that this includes precondition/postcondition
3605 -- pragmas generated to correspond to Pre/Post aspects.
3607 -- Storage_Size_Variable (Node15) [implementation base type only]
3608 -- Present in access types and task type entities. This flag is set
3609 -- if a valid and effective pragma Storage_Size applies to the base
3610 -- type. Points to the entity for a variable that is created to
3611 -- hold the value given in a Storage_Size pragma for an access
3612 -- collection or a task type. Note that in the access type case,
3613 -- this field is present only in the root type (since derived types
3614 -- share the same storage pool).
3616 -- Static_Elaboration_Desired (Flag77)
3617 -- Present in library-level packages. Set by the pragma of the same
3618 -- name, to indicate that static initialization must be attempted for
3619 -- all types declared in the package, and that a warning must be emitted
3620 -- for those types to which static initialization is not available.
3622 -- Static_Initialization (Node26)
3623 -- Present in initialization procedures for types whose objects can be
3624 -- initialized statically. The value of this attribute is a positional
3625 -- aggregate whose components are compile-time static values. Used
3626 -- when available in object declarations to eliminate the call to the
3627 -- initialization procedure, and to minimize elaboration code.
3629 -- Stored_Constraint (Elist23)
3630 -- Present in entities that can have discriminants (concurrent types
3631 -- subtypes, record types and subtypes, private types and subtypes,
3632 -- limited private types and subtypes and incomplete types). Points
3633 -- to an element list containing the expressions for each of the
3634 -- stored discriminants for the record (sub)type.
3636 -- Strict_Alignment (Flag145) [implementation base type only]
3637 -- Present in all type entities. Indicates that some containing part
3638 -- is either aliased or tagged. This prohibits packing the object
3639 -- tighter than its natural size and alignment.
3641 -- String_Literal_Length (Uint16)
3642 -- Present in string literal subtypes (which are created to correspond
3643 -- to string literals in the program). Contains the length of the string
3646 -- String_Literal_Low_Bound (Node15)
3647 -- Present in string literal subtypes (which are created to correspond
3648 -- to string literals in the program). Contains an expression whose
3649 -- value represents the low bound of the literal. This is a copy of
3650 -- the low bound of the applicable index constraint if there is one,
3651 -- or a copy of the low bound of the index base type if not.
3653 -- Subprograms_For_Type (Node29)
3654 -- Present in all type entities, and in subprogram entities. This is used
3655 -- to hold a list of subprogram entities for subprograms associated with
3656 -- the type, linked through the Suprogram_List field of the subprogram
3657 -- entity. Basically this is a way of multiplexing the single field to
3658 -- hold more than one entity (since we ran out of space in some type
3659 -- entities). This is currently used for Invariant_Procedure and also
3660 -- for Predicate_Function, and clients will always use the latter two
3661 -- names to access entries in this list.
3663 -- Suppress_Elaboration_Warnings (Flag148)
3664 -- Present in all entities, can be set only for subprogram entities and
3665 -- for variables. If this flag is set then Sem_Elab will not generate
3666 -- elaboration warnings for the subprogram or variable. Suppression of
3667 -- such warnings is automatic for subprograms for which elaboration
3668 -- checks are suppressed (without the need to set this flag), but the
3669 -- flag is also set for various internal entities (such as init procs)
3670 -- which are known not to generate any possible access before
3671 -- elaboration, and it is set on variables when a warning is given to
3672 -- avoid multiple elaboration warnings for the same variable.
3674 -- Suppress_Init_Proc (Flag105) [base type only]
3675 -- Present in all type entities. Set to suppress the generation of
3676 -- initialization procedures where they are known to be not needed.
3677 -- For example, the enumeration image table entity uses this flag.
3679 -- Suppress_Style_Checks (Flag165)
3680 -- Present in all entities. Suppresses any style checks specifically
3681 -- associated with the given entity if set.
3683 -- Suppress_Value_Tracking_On_Call (Flag217)
3684 -- Present in all entities. Set in a scope entity if value tracking is to
3685 -- be suppressed on any call within the scope. Used when an access to a
3686 -- local subprogram is computed, to deal with the possibility that this
3687 -- value may be passed around, and if used, may clobber a local variable.
3689 -- Task_Body_Procedure (Node25)
3690 -- Present in task types and subtypes. Points to the entity for the task
3691 -- task body procedure (as further described in Exp_Ch9, task bodies are
3692 -- expanded into procedures). A convenient function to retrieve this
3693 -- field is Sem_Util.Get_Task_Body_Procedure.
3695 -- The last sentence is odd??? Why not have Task_Body_Procedure go to the
3696 -- Underlying_Type of the Root_Type???
3698 -- Treat_As_Volatile (Flag41)
3699 -- Present in all type entities, and also in constants, components and
3700 -- variables. Set if this entity is to be treated as volatile for code
3701 -- generation purposes. Always set if Is_Volatile is set, but can also
3702 -- be set as a result of situations (such as address overlays) where
3703 -- the front end wishes to force volatile handling to inhibit aliasing
3704 -- optimization which might be legally ok, but is undesirable. Note
3705 -- that the back end always tests this flag rather than Is_Volatile.
3706 -- The front end tests Is_Volatile if it is concerned with legality
3707 -- checks associated with declared volatile variables, but if the test
3708 -- is for the purposes of suppressing optimizations, then the front
3709 -- end should test Treat_As_Volatile rather than Is_Volatile.
3711 -- Note: before testing Treat_As_Volatile, consider whether it would
3712 -- be more appropriate to use Exp_Util.Is_Volatile_Reference instead,
3713 -- which catches more cases of volatile references.
3715 -- Type_High_Bound (synthesized)
3716 -- Applies to scalar types. Returns the tree node (Node_Id) that contains
3717 -- the high bound of a scalar type. The returned value is literal for a
3718 -- base type, but may be an expression in the case of scalar type with
3719 -- dynamic bounds. Note that in the case of a fixed point type, the high
3720 -- bound is in units of small, and is an integer.
3722 -- Type_Low_Bound (synthesized)
3723 -- Applies to scalar types. Returns the tree node (Node_Id) that contains
3724 -- the low bound of a scalar type. The returned value is literal for a
3725 -- base type, but may be an expression in the case of scalar type with
3726 -- dynamic bounds. Note that in the case of a fixed point type, the low
3727 -- bound is in units of small, and is an integer.
3729 -- Underlying_Full_View (Node19)
3730 -- Present in private subtypes that are the completion of other private
3731 -- types, or in private types that are derived from private subtypes. If
3732 -- the full view of a private type T is derived from another private type
3733 -- with discriminants Td, the full view of T is also private, and there
3734 -- is no way to attach to it a further full view that would convey the
3735 -- structure of T to the back end. The Underlying_Full_ View is an
3736 -- attribute of the full view that is a subtype of Td with the same
3737 -- constraint as the declaration for T. The declaration for this subtype
3738 -- is built at the point of the declaration of T, either as completion,
3739 -- or as a subtype declaration where the base type is private and has a
3740 -- private completion. If Td is already constrained, then its full view
3741 -- can serve directly as the full view of T.
3743 -- Underlying_Record_View (Node28)
3744 -- Present in record types. Set for record types that are extensions of
3745 -- types with unknown discriminants, and also set for internally built
3746 -- underlying record views to reference its original record type. Record
3747 -- types that are extensions of types with unknown discriminants do not
3748 -- have a completion, but they cannot be used without having some
3749 -- discriminated view at hand. This view is a record type with the same
3750 -- structure, whose parent type is the full view of the parent in the
3751 -- original type extension.
3753 -- Underlying_Type (synthesized)
3754 -- Applies to all entities. This is the identity function except in the
3755 -- case where it is applied to an incomplete or private type, in which
3756 -- case it is the underlying type of the type declared by the completion,
3757 -- or Empty if the completion has not yet been encountered and analyzed.
3759 -- Note: the reason this attribute applies to all entities, and not just
3760 -- types, is to legitimize code where Underlying_Type is applied to an
3761 -- entity which may or may not be a type, with the intent that if it is a
3762 -- type, its underlying type is taken.
3764 -- Universal_Aliasing (Flag216) [base type only]
3765 -- Present in all type entities. Set to direct the back-end to avoid
3766 -- any optimizations based on type-based alias analysis for this type.
3767 -- Indicates that objects of this type can alias objects of any other
3768 -- types, which guarantees that any objects can be referenced through
3769 -- access types designating this type safely, whatever the actual type
3770 -- of these objects. In other words, the effect is as though access
3771 -- types designating this type were subject to No_Strict_Aliasing.
3773 -- Unset_Reference (Node16)
3774 -- Present in variables and out parameters. This is normally Empty. It
3775 -- is set to point to an identifier that represents a reference to the
3776 -- entity before any value has been set. Only the first such reference
3777 -- is identified. This field is used to generate a warning message if
3778 -- necessary (see Sem_Warn.Check_Unset_Reference).
3780 -- Used_As_Generic_Actual (Flag222)
3781 -- Present in all entities, set if the entity is used as an argument to
3782 -- a generic instantiation. Used to tune certain warning messages.
3784 -- Uses_Sec_Stack (Flag95)
3785 -- Present in scope entities (blocks,functions, procedures, tasks,
3786 -- entries). Set to True when secondary stack is used in this scope and
3787 -- must be released on exit unless Sec_Stack_Needed_For_Return is set.
3789 -- Vax_Float (Flag151) [base type only]
3790 -- Present in all type and subtype entities. Set only on the base type of
3791 -- float types with Vax format. The particular format is determined by
3792 -- the Digits_Value value which is 6,9,15 for F_Float, D_Float, G_Float.
3794 -- Warnings_Off (Flag96)
3795 -- Present in all entities. Set if a pragma Warnings (Off, entity-name)
3796 -- is used to suppress warnings for a given entity. It is also used by
3797 -- the compiler in some situations to kill spurious warnings. Note that
3798 -- clients should generally not test this flag directly, but instead
3799 -- use function Has_Warnings_Off.
3801 -- Warnings_Off_Used (Flag236)
3802 -- Present in all entities. Can only be set if Warnings_Off is set. If
3803 -- set indicates that a warning was suppressed by the Warnings_Off flag,
3804 -- and Unmodified/Unreferenced would not have suppressed the warning.
3806 -- Warnings_Off_Used_Unmodified (Flag237)
3807 -- Present in all entities. Can only be set if Warnings_Off is set and
3808 -- Has_Pragma_Unmodified is not set. If set indicates that a warning was
3809 -- suppressed by the Warnings_Off status but that pragma Unmodified
3810 -- would also have suppressed the warning.
3812 -- Warnings_Off_Used_Unreferenced (Flag238)
3813 -- Present in all entities. Can only be set if Warnings_Off is set and
3814 -- Has_Pragma_Unreferenced is not set. If set indicates that a warning
3815 -- was suppressed by the Warnings_Off status but that pragma Unreferenced
3816 -- would also have suppressed the warning.
3818 -- Was_Hidden (Flag196)
3819 -- Present in all entities. Used to save the value of the Is_Hidden
3820 -- attribute when the limited-view is installed (Ada 2005: AI-217).
3822 -- Wrapped_Entity (Node27)
3823 -- Present in functions and procedures which have been classified as
3824 -- Is_Primitive_Wrapper. Set to the entity being wrapped.
3830 -- The following entity kinds are introduced by the corresponding type
3834 -- E_General_Access_Type,
3835 -- E_Access_Subprogram_Type,
3836 -- E_Anonymous_Access_Subprogram_Type,
3837 -- E_Access_Protected_Subprogram_Type,
3838 -- E_Anonymous_Access_Protected_Subprogram_Type
3839 -- E_Anonymous_Access_Type.
3841 -- E_Access_Subtype is for an access subtype created by a subtype
3844 -- In addition, we define the kind E_Allocator_Type to label allocators.
3845 -- This is because special resolution rules apply to this construct.
3846 -- Eventually the constructs are labeled with the access type imposed by
3847 -- the context. Gigi should never see the type E_Allocator.
3849 -- Similarly, the type E_Access_Attribute_Type is used as the initial kind
3850 -- associated with an access attribute. After resolution a specific access
3851 -- type will be established as determined by the context.
3853 -- Finally, the type Any_Access is used to label -null- during type
3854 -- resolution. Any_Access is also replaced by the context type after
3857 --------------------------------
3858 -- Classification of Entities --
3859 --------------------------------
3861 -- The classification of program entities which follows is a refinement of
3862 -- the list given in RM 3.1(1). E.g., separate entities denote subtypes of
3863 -- different type classes. Ada 95 entities include class wide types,
3864 -- protected types, subprogram types, generalized access types, generic
3865 -- formal derived types and generic formal packages.
3867 -- The order chosen for these kinds allows us to classify related entities
3868 -- so that they are contiguous. As a result, they do not appear in the
3869 -- exact same order as their order of first appearance in the LRM (For
3870 -- example, private types are listed before packages). The contiguity
3871 -- allows us to define useful subtypes (see below) such as type entities,
3872 -- overloaded entities, etc.
3874 -- Each entity (explicitly or implicitly declared) has a kind, which is
3875 -- a value of the following type:
3877 type Entity_Kind is (
3880 -- The initial Ekind value for a newly created entity. Also used as the
3881 -- Ekind for Standard_Void_Type, a type entity in Standard used as a
3882 -- dummy type for the return type of a procedure (the reason we create
3883 -- this type is to share the circuits for performing overload resolution
3891 -- Components of a record declaration, private declarations of
3892 -- protected objects.
3895 -- Constants created by an object declaration with a constant keyword
3898 -- A discriminant, created by the use of a discriminant in a type
3902 -- A loop parameter created by a for loop
3905 -- Variables created by an object declaration with no constant keyword
3907 ------------------------
3908 -- Parameter Entities --
3909 ------------------------
3911 -- Parameters are also objects
3914 -- An out parameter of a subprogram or entry
3917 -- An in-out parameter of a subprogram or entry
3920 -- An in parameter of a subprogram or entry
3922 --------------------------------
3923 -- Generic Parameter Entities --
3924 --------------------------------
3926 -- Generic parameters are also objects
3928 E_Generic_In_Out_Parameter,
3929 -- A generic in out parameter, created by the use of a generic in out
3930 -- parameter in a generic declaration.
3932 E_Generic_In_Parameter,
3933 -- A generic in parameter, created by the use of a generic in
3934 -- parameter in a generic declaration.
3941 -- Named numbers created by a number declaration with an integer value
3944 -- Named numbers created by a number declaration with a real value
3946 -----------------------
3947 -- Enumeration Types --
3948 -----------------------
3951 -- Enumeration types, created by an enumeration type declaration
3953 E_Enumeration_Subtype,
3954 -- Enumeration subtypes, created by an explicit or implicit subtype
3955 -- declaration applied to an enumeration type or subtype.
3961 E_Signed_Integer_Type,
3962 -- Signed integer type, used for the anonymous base type of the
3963 -- integer subtype created by an integer type declaration.
3965 E_Signed_Integer_Subtype,
3966 -- Signed integer subtype, created by either an integer subtype or
3967 -- integer type declaration (in the latter case an integer type is
3968 -- created for the base type, and this is the first named subtype).
3970 E_Modular_Integer_Type,
3971 -- Modular integer type, used for the anonymous base type of the
3972 -- integer subtype created by a modular integer type declaration.
3974 E_Modular_Integer_Subtype,
3975 -- Modular integer subtype, created by either an modular subtype
3976 -- or modular type declaration (in the latter case a modular type
3977 -- is created for the base type, and this is the first named subtype).
3979 E_Ordinary_Fixed_Point_Type,
3980 -- Ordinary fixed type, used for the anonymous base type of the
3981 -- fixed subtype created by an ordinary fixed point type declaration.
3983 E_Ordinary_Fixed_Point_Subtype,
3984 -- Ordinary fixed point subtype, created by either an ordinary fixed
3985 -- point subtype or ordinary fixed point type declaration (in the
3986 -- latter case a fixed point type is created for the base type, and
3987 -- this is the first named subtype).
3989 E_Decimal_Fixed_Point_Type,
3990 -- Decimal fixed type, used for the anonymous base type of the decimal
3991 -- fixed subtype created by an ordinary fixed point type declaration.
3993 E_Decimal_Fixed_Point_Subtype,
3994 -- Decimal fixed point subtype, created by either a decimal fixed point
3995 -- subtype or decimal fixed point type declaration (in the latter case
3996 -- a fixed point type is created for the base type, and this is the
3997 -- first named subtype).
3999 E_Floating_Point_Type,
4000 -- Floating point type, used for the anonymous base type of the
4001 -- floating point subtype created by a floating point type declaration.
4003 E_Floating_Point_Subtype,
4004 -- Floating point subtype, created by either a floating point subtype
4005 -- or floating point type declaration (in the latter case a floating
4006 -- point type is created for the base type, and this is the first
4014 -- An access type created by an access type declaration with no all
4015 -- keyword present. Note that the predefined type Any_Access, which
4016 -- has E_Access_Type Ekind, is used to label NULL in the upwards pass
4017 -- of type analysis, to be replaced by the true access type in the
4018 -- downwards resolution pass.
4021 -- An access subtype created by a subtype declaration for any access
4022 -- type (whether or not it is a general access type).
4024 E_Access_Attribute_Type,
4025 -- An access type created for an access attribute (such as 'Access,
4026 -- 'Unrestricted_Access and Unchecked_Access)
4029 -- A special internal type used to label allocators and attribute
4030 -- references using 'Access. This is needed because special resolution
4031 -- rules apply to these constructs. On the resolution pass, this type
4032 -- is always replaced by the actual access type, so Gigi should never
4033 -- see types with this Ekind.
4035 E_General_Access_Type,
4036 -- An access type created by an access type declaration with the all
4039 E_Access_Subprogram_Type,
4040 -- An access to subprogram type, created by an access to subprogram
4043 E_Anonymous_Access_Subprogram_Type,
4044 -- An anonymous access to subprogram type, created by an access to
4045 -- subprogram declaration, or generated for a current instance of
4046 -- a type name appearing within a component definition that has an
4047 -- anonymous access to subprogram type.
4049 E_Access_Protected_Subprogram_Type,
4050 -- An access to a protected subprogram, created by the corresponding
4051 -- declaration. Values of such a type denote both a protected object
4052 -- and a protected operation within, and have different compile-time
4053 -- and run-time properties than other access to subprograms.
4055 E_Anonymous_Access_Protected_Subprogram_Type,
4056 -- An anonymous access to protected subprogram type, created by an
4057 -- access to subprogram declaration.
4059 E_Anonymous_Access_Type,
4060 -- An anonymous access type created by an access parameter or access
4063 ---------------------
4064 -- Composite Types --
4065 ---------------------
4068 -- An array type created by an array type declaration. Includes all
4069 -- cases of arrays, except for string types.
4072 -- An array subtype, created by an explicit array subtype declaration,
4073 -- or the use of an anonymous array subtype.
4076 -- A string type, i.e. an array type whose component type is a character
4077 -- type, and for which string literals can thus be written.
4080 -- A string subtype, created by an explicit subtype declaration for a
4081 -- string type, or the use of an anonymous subtype of a string type,
4083 E_String_Literal_Subtype,
4084 -- A special string subtype, used only to describe the type of a string
4085 -- literal (will always be one dimensional, with literal bounds).
4088 -- A class wide type, created by any tagged type declaration (i.e. if
4089 -- a tagged type is declared, the corresponding class type is always
4090 -- created, using this Ekind value).
4092 E_Class_Wide_Subtype,
4093 -- A subtype of a class wide type, created by a subtype declaration
4094 -- used to declare a subtype of a class type.
4097 -- A record type, created by a record type declaration
4100 -- A record subtype, created by a record subtype declaration
4102 E_Record_Type_With_Private,
4103 -- Used for types defined by a private extension declaration, and
4104 -- for tagged private types. Includes the fields for both private
4105 -- types and for record types (with the sole exception of
4106 -- Corresponding_Concurrent_Type which is obviously not needed).
4107 -- This entity is considered to be both a record type and
4110 E_Record_Subtype_With_Private,
4111 -- A subtype of a type defined by a private extension declaration
4114 -- A private type, created by a private type declaration
4115 -- that has neither the keyword limited nor the keyword tagged.
4118 -- A subtype of a private type, created by a subtype declaration used
4119 -- to declare a subtype of a private type.
4121 E_Limited_Private_Type,
4122 -- A limited private type, created by a private type declaration that
4123 -- has the keyword limited, but not the keyword tagged.
4125 E_Limited_Private_Subtype,
4126 -- A subtype of a limited private type, created by a subtype declaration
4127 -- used to declare a subtype of a limited private type.
4130 -- An incomplete type, created by an incomplete type declaration
4132 E_Incomplete_Subtype,
4133 -- An incomplete subtype, created by a subtype declaration where the
4134 -- subtype mark denotes an incomplete type.
4137 -- A task type, created by a task type declaration. An entity with this
4138 -- Ekind is also created to describe the anonymous type of a task that
4139 -- is created by a single task declaration.
4142 -- A subtype of a task type, created by a subtype declaration used to
4143 -- declare a subtype of a task type.
4146 -- A protected type, created by a protected type declaration. An entity
4147 -- with this Ekind is also created to describe the anonymous type of
4148 -- a protected object created by a single protected declaration.
4150 E_Protected_Subtype,
4151 -- A subtype of a protected type, created by a subtype declaration used
4152 -- to declare a subtype of a protected type.
4159 -- The type of an exception created by an exception declaration
4162 -- This is the designated type of an Access_To_Subprogram. Has type
4163 -- and signature like a subprogram entity, so can appear in calls,
4164 -- which are resolved like regular calls, except that such an entity
4165 -- is not overloadable.
4167 ---------------------------
4168 -- Overloadable Entities --
4169 ---------------------------
4171 E_Enumeration_Literal,
4172 -- An enumeration literal, created by the use of the literal in an
4173 -- enumeration type definition.
4176 -- A function, created by a function declaration or a function body
4177 -- that acts as its own declaration.
4180 -- A predefined operator, appearing in Standard, or an implicitly
4181 -- defined concatenation operator created whenever an array is
4182 -- declared. We do not make normal derived operators explicit in
4183 -- the tree, but the concatenation operators are made explicit.
4186 -- A procedure, created by a procedure declaration or a procedure
4187 -- body that acts as its own declaration.
4190 -- An entry, created by an entry declaration in a task or protected
4193 --------------------
4194 -- Other Entities --
4195 --------------------
4198 -- An entry family, created by an entry family declaration in a
4199 -- task or protected type definition.
4202 -- A block identifier, created by an explicit or implicit label on
4203 -- a block or declare statement.
4205 E_Entry_Index_Parameter,
4206 -- An entry index parameter created by an entry index specification
4207 -- for the body of a protected entry family.
4210 -- An exception created by an exception declaration. The exception
4211 -- itself uses E_Exception for the Ekind, the implicit type that is
4212 -- created to represent its type uses the Ekind E_Exception_Type.
4215 -- A generic function. This is the entity for a generic function
4216 -- created by a generic subprogram declaration.
4218 E_Generic_Procedure,
4219 -- A generic function. This is the entity for a generic procedure
4220 -- created by a generic subprogram declaration.
4223 -- A generic package, this is the entity for a generic package created
4224 -- by a generic package declaration.
4227 -- The defining entity for a label. Note that this is created by the
4228 -- implicit label declaration, not the occurrence of the label itself,
4229 -- which is simply a direct name referring to the label.
4232 -- A loop identifier, created by an explicit or implicit label on a
4236 -- A dummy entity created for each return statement. Used to hold
4237 -- information about the return statement (what it applies to) and in
4238 -- rules checking. For example, a simple_return_statement that applies
4239 -- to an extended_return_statement cannot have an expression; this
4240 -- requires putting the E_Return_Statement entity for the
4241 -- extended_return_statement on the scope stack.
4244 -- A package, created by a package declaration
4247 -- A package body. This entity serves only limited functions, since
4248 -- most semantic analysis uses the package entity (E_Package). However
4249 -- there are some attributes that are significant for the body entity.
4250 -- For example, collection of exception handlers.
4253 -- A protected object, created by an object declaration that declares
4254 -- an object of a protected type.
4257 -- A protected body. This entity serves almost no function, since all
4258 -- semantic analysis uses the protected entity (E_Protected_Type)
4261 -- A task body. This entity serves almost no function, since all
4262 -- semantic analysis uses the protected entity (E_Task_Type).
4265 -- A subprogram body. Used when a subprogram has a separate declaration
4266 -- to represent the entity for the body. This entity serves almost no
4267 -- function, since all semantic analysis uses the subprogram entity
4268 -- for the declaration (E_Function or E_Procedure).
4271 for Entity_Kind'Size use 8;
4272 -- The data structures in Atree assume this!
4274 --------------------------
4275 -- Subtype Declarations --
4276 --------------------------
4278 -- The above entities are arranged so that they can be conveniently grouped
4279 -- into subtype ranges. Note that for each of the xxx_Kind ranges defined
4280 -- below, there is a corresponding Is_xxx (or for types, Is_xxx_Type)
4281 -- predicate which is to be used in preference to direct range tests using
4282 -- the subtype name. However, the subtype names are available for direct
4283 -- use, e.g. as choices in case statements.
4285 subtype Access_Kind is Entity_Kind range
4288 -- E_Access_Attribute_Type
4290 -- E_General_Access_Type
4291 -- E_Access_Subprogram_Type
4292 -- E_Anonymous_Access_Subprogram_Type
4293 -- E_Access_Protected_Subprogram_Type
4294 -- E_Anonymous_Access_Protected_Subprogram_Type
4295 E_Anonymous_Access_Type;
4297 subtype Access_Subprogram_Kind is Entity_Kind range
4298 E_Access_Subprogram_Type ..
4299 -- E_Anonymous_Access_Subprogram_Type
4300 -- E_Access_Protected_Subprogram_Type
4301 E_Anonymous_Access_Protected_Subprogram_Type;
4303 subtype Access_Protected_Kind is Entity_Kind range
4304 E_Access_Protected_Subprogram_Type ..
4305 E_Anonymous_Access_Protected_Subprogram_Type;
4307 subtype Aggregate_Kind is Entity_Kind range
4312 -- E_String_Literal_Subtype
4313 -- E_Class_Wide_Type
4314 -- E_Class_Wide_Subtype
4318 subtype Array_Kind is Entity_Kind range
4323 E_String_Literal_Subtype;
4325 subtype Assignable_Kind is Entity_Kind range
4330 subtype Class_Wide_Kind is Entity_Kind range
4331 E_Class_Wide_Type ..
4332 E_Class_Wide_Subtype;
4334 subtype Composite_Kind is Entity_Kind range
4339 -- E_String_Literal_Subtype
4340 -- E_Class_Wide_Type
4341 -- E_Class_Wide_Subtype
4344 -- E_Record_Type_With_Private
4345 -- E_Record_Subtype_With_Private
4347 -- E_Private_Subtype
4348 -- E_Limited_Private_Type
4349 -- E_Limited_Private_Subtype
4350 -- E_Incomplete_Type
4351 -- E_Incomplete_Subtype
4354 -- E_Protected_Type,
4355 E_Protected_Subtype;
4357 subtype Concurrent_Kind is Entity_Kind range
4360 -- E_Protected_Type,
4361 E_Protected_Subtype;
4363 subtype Concurrent_Body_Kind is Entity_Kind range
4367 subtype Decimal_Fixed_Point_Kind is Entity_Kind range
4368 E_Decimal_Fixed_Point_Type ..
4369 E_Decimal_Fixed_Point_Subtype;
4371 subtype Digits_Kind is Entity_Kind range
4372 E_Decimal_Fixed_Point_Type ..
4373 -- E_Decimal_Fixed_Point_Subtype
4374 -- E_Floating_Point_Type
4375 E_Floating_Point_Subtype;
4377 subtype Discrete_Kind is Entity_Kind range
4378 E_Enumeration_Type ..
4379 -- E_Enumeration_Subtype
4380 -- E_Signed_Integer_Type
4381 -- E_Signed_Integer_Subtype
4382 -- E_Modular_Integer_Type
4383 E_Modular_Integer_Subtype;
4385 subtype Discrete_Or_Fixed_Point_Kind is Entity_Kind range
4386 E_Enumeration_Type ..
4387 -- E_Enumeration_Subtype
4388 -- E_Signed_Integer_Type
4389 -- E_Signed_Integer_Subtype
4390 -- E_Modular_Integer_Type
4391 -- E_Modular_Integer_Subtype
4392 -- E_Ordinary_Fixed_Point_Type
4393 -- E_Ordinary_Fixed_Point_Subtype
4394 -- E_Decimal_Fixed_Point_Type
4395 E_Decimal_Fixed_Point_Subtype;
4397 subtype Elementary_Kind is Entity_Kind range
4398 E_Enumeration_Type ..
4399 -- E_Enumeration_Subtype
4400 -- E_Signed_Integer_Type
4401 -- E_Signed_Integer_Subtype
4402 -- E_Modular_Integer_Type
4403 -- E_Modular_Integer_Subtype
4404 -- E_Ordinary_Fixed_Point_Type
4405 -- E_Ordinary_Fixed_Point_Subtype
4406 -- E_Decimal_Fixed_Point_Type
4407 -- E_Decimal_Fixed_Point_Subtype
4408 -- E_Floating_Point_Type
4409 -- E_Floating_Point_Subtype
4412 -- E_Access_Attribute_Type
4414 -- E_General_Access_Type
4415 -- E_Access_Subprogram_Type
4416 -- E_Access_Protected_Subprogram_Type
4417 -- E_Anonymous_Access_Subprogram_Type
4418 -- E_Anonymous_Access_Protected_Subprogram_Type
4419 E_Anonymous_Access_Type;
4421 subtype Enumeration_Kind is Entity_Kind range
4422 E_Enumeration_Type ..
4423 E_Enumeration_Subtype;
4425 subtype Entry_Kind is Entity_Kind range
4429 subtype Fixed_Point_Kind is Entity_Kind range
4430 E_Ordinary_Fixed_Point_Type ..
4431 -- E_Ordinary_Fixed_Point_Subtype
4432 -- E_Decimal_Fixed_Point_Type
4433 E_Decimal_Fixed_Point_Subtype;
4435 subtype Float_Kind is Entity_Kind range
4436 E_Floating_Point_Type ..
4437 E_Floating_Point_Subtype;
4439 subtype Formal_Kind is Entity_Kind range
4441 -- E_In_Out_Parameter
4444 subtype Formal_Object_Kind is Entity_Kind range
4445 E_Generic_In_Out_Parameter ..
4446 E_Generic_In_Parameter;
4448 subtype Generic_Subprogram_Kind is Entity_Kind range
4449 E_Generic_Function ..
4450 E_Generic_Procedure;
4452 subtype Generic_Unit_Kind is Entity_Kind range
4453 E_Generic_Function ..
4454 -- E_Generic_Procedure
4457 subtype Incomplete_Kind is Entity_Kind range
4458 E_Incomplete_Type ..
4459 E_Incomplete_Subtype;
4461 subtype Incomplete_Or_Private_Kind is Entity_Kind range
4462 E_Record_Type_With_Private ..
4463 -- E_Record_Subtype_With_Private
4465 -- E_Private_Subtype
4466 -- E_Limited_Private_Type
4467 -- E_Limited_Private_Subtype
4468 -- E_Incomplete_Type
4469 E_Incomplete_Subtype;
4471 subtype Integer_Kind is Entity_Kind range
4472 E_Signed_Integer_Type ..
4473 -- E_Signed_Integer_Subtype
4474 -- E_Modular_Integer_Type
4475 E_Modular_Integer_Subtype;
4477 subtype Modular_Integer_Kind is Entity_Kind range
4478 E_Modular_Integer_Type ..
4479 E_Modular_Integer_Subtype;
4481 subtype Named_Kind is Entity_Kind range
4485 subtype Numeric_Kind is Entity_Kind range
4486 E_Signed_Integer_Type ..
4487 -- E_Signed_Integer_Subtype
4488 -- E_Modular_Integer_Type
4489 -- E_Modular_Integer_Subtype
4490 -- E_Ordinary_Fixed_Point_Type
4491 -- E_Ordinary_Fixed_Point_Subtype
4492 -- E_Decimal_Fixed_Point_Type
4493 -- E_Decimal_Fixed_Point_Subtype
4494 -- E_Floating_Point_Type
4495 E_Floating_Point_Subtype;
4497 subtype Object_Kind is Entity_Kind range
4504 -- E_In_Out_Parameter
4506 -- E_Generic_In_Out_Parameter
4507 E_Generic_In_Parameter;
4509 subtype Ordinary_Fixed_Point_Kind is Entity_Kind range
4510 E_Ordinary_Fixed_Point_Type ..
4511 E_Ordinary_Fixed_Point_Subtype;
4513 subtype Overloadable_Kind is Entity_Kind range
4514 E_Enumeration_Literal ..
4520 subtype Private_Kind is Entity_Kind range
4521 E_Record_Type_With_Private ..
4522 -- E_Record_Subtype_With_Private
4524 -- E_Private_Subtype
4525 -- E_Limited_Private_Type
4526 E_Limited_Private_Subtype;
4528 subtype Protected_Kind is Entity_Kind range
4530 E_Protected_Subtype;
4532 subtype Real_Kind is Entity_Kind range
4533 E_Ordinary_Fixed_Point_Type ..
4534 -- E_Ordinary_Fixed_Point_Subtype
4535 -- E_Decimal_Fixed_Point_Type
4536 -- E_Decimal_Fixed_Point_Subtype
4537 -- E_Floating_Point_Type
4538 E_Floating_Point_Subtype;
4540 subtype Record_Kind is Entity_Kind range
4541 E_Class_Wide_Type ..
4542 -- E_Class_Wide_Subtype
4545 -- E_Record_Type_With_Private
4546 E_Record_Subtype_With_Private;
4548 subtype Scalar_Kind is Entity_Kind range
4549 E_Enumeration_Type ..
4550 -- E_Enumeration_Subtype
4551 -- E_Signed_Integer_Type
4552 -- E_Signed_Integer_Subtype
4553 -- E_Modular_Integer_Type
4554 -- E_Modular_Integer_Subtype
4555 -- E_Ordinary_Fixed_Point_Type
4556 -- E_Ordinary_Fixed_Point_Subtype
4557 -- E_Decimal_Fixed_Point_Type
4558 -- E_Decimal_Fixed_Point_Subtype
4559 -- E_Floating_Point_Type
4560 E_Floating_Point_Subtype;
4562 subtype String_Kind is Entity_Kind range
4565 E_String_Literal_Subtype;
4567 subtype Subprogram_Kind is Entity_Kind range
4572 subtype Signed_Integer_Kind is Entity_Kind range
4573 E_Signed_Integer_Type ..
4574 E_Signed_Integer_Subtype;
4576 subtype Task_Kind is Entity_Kind range
4580 subtype Type_Kind is Entity_Kind range
4581 E_Enumeration_Type ..
4582 -- E_Enumeration_Subtype
4583 -- E_Signed_Integer_Type
4584 -- E_Signed_Integer_Subtype
4585 -- E_Modular_Integer_Type
4586 -- E_Modular_Integer_Subtype
4587 -- E_Ordinary_Fixed_Point_Type
4588 -- E_Ordinary_Fixed_Point_Subtype
4589 -- E_Decimal_Fixed_Point_Type
4590 -- E_Decimal_Fixed_Point_Subtype
4591 -- E_Floating_Point_Type
4592 -- E_Floating_Point_Subtype
4595 -- E_Access_Attribute_Type
4596 -- E_Allocator_Type,
4597 -- E_General_Access_Type
4598 -- E_Access_Subprogram_Type,
4599 -- E_Access_Protected_Subprogram_Type
4600 -- E_Anonymous_Access_Subprogram_Type
4601 -- E_Anonymous_Access_Protected_Subprogram_Type
4602 -- E_Anonymous_Access_Type
4607 -- E_String_Literal_Subtype
4608 -- E_Class_Wide_Subtype
4609 -- E_Class_Wide_Type
4612 -- E_Record_Type_With_Private
4613 -- E_Record_Subtype_With_Private
4615 -- E_Private_Subtype
4616 -- E_Limited_Private_Type
4617 -- E_Limited_Private_Subtype
4618 -- E_Incomplete_Type
4619 -- E_Incomplete_Subtype
4623 -- E_Protected_Subtype
4627 --------------------------------------------------------
4628 -- Description of Defined Attributes for Entity_Kinds --
4629 --------------------------------------------------------
4631 -- For each enumeration value defined in Entity_Kind we list all the
4632 -- attributes defined in Einfo which can legally be applied to an entity
4633 -- of that kind. The implementation of the attribute functions (and for
4634 -- non-synthesized attributes, of the corresponding set procedures) are
4635 -- in the Einfo body.
4637 -- The following attributes apply to all entities
4642 -- Next_Entity (Node2)
4646 -- First_Rep_Item (Node6)
4647 -- Freeze_Node (Node7)
4649 -- Address_Taken (Flag104)
4650 -- Can_Never_Be_Null (Flag38)
4651 -- Checks_May_Be_Suppressed (Flag31)
4652 -- Debug_Info_Off (Flag166)
4653 -- Has_Anon_Block_Suffix (Flag201)
4654 -- Has_Controlled_Component (Flag43) (base type only)
4655 -- Has_Convention_Pragma (Flag119)
4656 -- Has_Delayed_Aspects (Flag200)
4657 -- Has_Delayed_Freeze (Flag18)
4658 -- Has_Fully_Qualified_Name (Flag173)
4659 -- Has_Gigi_Rep_Item (Flag82)
4660 -- Has_Homonym (Flag56)
4661 -- Has_Persistent_BSS (Flag188)
4662 -- Has_Pragma_Elaborate_Body (Flag150)
4663 -- Has_Pragma_Inline (Flag157)
4664 -- Has_Pragma_Inline_Always (Flag230)
4665 -- Has_Pragma_Pack (Flag121) (base type only)
4666 -- Has_Pragma_Pure (Flag203)
4667 -- Has_Pragma_Pure_Function (Flag179)
4668 -- Has_Pragma_Thread_Local_Storage (Flag169)
4669 -- Has_Pragma_Unmodified (Flag233)
4670 -- Has_Pragma_Unreferenced (Flag180)
4671 -- Has_Predicates (Flag250)
4672 -- Has_Private_Declaration (Flag155)
4673 -- Has_Qualified_Name (Flag161)
4674 -- Has_Stream_Size_Clause (Flag184)
4675 -- Has_Unknown_Discriminants (Flag72)
4676 -- Has_Xref_Entry (Flag182)
4677 -- In_Private_Part (Flag45)
4678 -- Is_Ada_2005_Only (Flag185)
4679 -- Is_Ada_2012_Only (Flag199)
4680 -- Is_Bit_Packed_Array (Flag122) (base type only)
4681 -- Is_Character_Type (Flag63)
4682 -- Is_Child_Unit (Flag73)
4683 -- Is_Compilation_Unit (Flag149)
4684 -- Is_Completely_Hidden (Flag103)
4685 -- Is_Discrim_SO_Function (Flag176)
4686 -- Is_Dispatch_Table_Entity (Flag234)
4687 -- Is_Dispatching_Operation (Flag6)
4688 -- Is_Entry_Formal (Flag52)
4689 -- Is_Exported (Flag99)
4690 -- Is_First_Subtype (Flag70)
4691 -- Is_Formal_Subprogram (Flag111)
4692 -- Is_Generic_Instance (Flag130)
4693 -- Is_Generic_Type (Flag13)
4694 -- Is_Hidden (Flag57)
4695 -- Is_Hidden_Open_Scope (Flag171)
4696 -- Is_Immediately_Visible (Flag7)
4697 -- Is_Imported (Flag24)
4698 -- Is_Inlined (Flag11)
4699 -- Is_Internal (Flag17)
4700 -- Is_Itype (Flag91)
4701 -- Is_Known_Non_Null (Flag37)
4702 -- Is_Known_Null (Flag204)
4703 -- Is_Known_Valid (Flag170)
4704 -- Is_Limited_Composite (Flag106)
4705 -- Is_Limited_Record (Flag25)
4706 -- Is_Obsolescent (Flag153)
4707 -- Is_Package_Body_Entity (Flag160)
4708 -- Is_Packed_Array_Type (Flag138)
4709 -- Is_Potentially_Use_Visible (Flag9)
4710 -- Is_Preelaborated (Flag59)
4711 -- Is_Primitive_Wrapper (Flag195)
4712 -- Is_Public (Flag10)
4714 -- Is_Remote_Call_Interface (Flag62)
4715 -- Is_Remote_Types (Flag61)
4716 -- Is_Renaming_Of_Object (Flag112)
4717 -- Is_Shared_Passive (Flag60)
4718 -- Is_Statically_Allocated (Flag28)
4719 -- Is_Tagged_Type (Flag55)
4720 -- Is_Trivial_Subprogram (Flag235)
4721 -- Is_Unchecked_Union (Flag117)
4722 -- Is_Visible_Formal (Flag206)
4723 -- Is_VMS_Exception (Flag133)
4724 -- Kill_Elaboration_Checks (Flag32)
4725 -- Kill_Range_Checks (Flag33)
4726 -- Kill_Tag_Checks (Flag34)
4727 -- Low_Bound_Tested (Flag205)
4728 -- Materialize_Entity (Flag168)
4729 -- Needs_Debug_Info (Flag147)
4730 -- Never_Set_In_Source (Flag115)
4731 -- No_Return (Flag113)
4732 -- Overlays_Constant (Flag243)
4733 -- Referenced (Flag156)
4734 -- Referenced_As_LHS (Flag36)
4735 -- Referenced_As_Out_Parameter (Flag227)
4736 -- Suppress_Elaboration_Warnings (Flag148)
4737 -- Suppress_Style_Checks (Flag165)
4738 -- Suppress_Value_Tracking_On_Call (Flag217)
4739 -- Used_As_Generic_Actual (Flag222)
4740 -- Warnings_Off (Flag96)
4741 -- Warnings_Off_Used (Flag236)
4742 -- Warnings_Off_Used_Unmodified (Flag237)
4743 -- Warnings_Off_Used_Unreferenced (Flag238)
4744 -- Was_Hidden (Flag196)
4746 -- Declaration_Node (synth)
4747 -- Has_Foreign_Convention (synth)
4748 -- Is_Dynamic_Scope (synth)
4749 -- Is_Standard_Character_Type (synth)
4750 -- Underlying_Type (synth)
4751 -- all classification attributes (synth)
4753 -- The following list of access functions applies to all entities for
4754 -- types and subtypes. References to this list appear subsequently as
4755 -- as "(plus type attributes)" for each appropriate Entity_Kind.
4757 -- Associated_Node_For_Itype (Node8)
4758 -- Class_Wide_Type (Node9)
4759 -- Full_View (Node11)
4762 -- Alignment (Uint14)
4763 -- Related_Expression (Node24)
4764 -- Current_Use_Clause (Node27)
4765 -- Subprograms_For_Type (Node29)
4767 -- Depends_On_Private (Flag14)
4768 -- Discard_Names (Flag88)
4769 -- Finalize_Storage_Only (Flag158) (base type only)
4770 -- From_With_Type (Flag159)
4771 -- Has_Aliased_Components (Flag135) (base type only)
4772 -- Has_Alignment_Clause (Flag46)
4773 -- Has_Atomic_Components (Flag86) (base type only)
4774 -- Has_Completion_In_Body (Flag71)
4775 -- Has_Complex_Representation (Flag140) (base type only)
4776 -- Has_Constrained_Partial_View (Flag187)
4777 -- Has_Discriminants (Flag5)
4778 -- Has_Inheritable_Invariants (Flag248)
4779 -- Has_Invariants (Flag232)
4780 -- Has_Non_Standard_Rep (Flag75) (base type only)
4781 -- Has_Object_Size_Clause (Flag172)
4782 -- Has_Pragma_Preelab_Init (Flag221)
4783 -- Has_Pragma_Unreferenced_Objects (Flag212)
4784 -- Has_Primitive_Operations (Flag120) (base type only)
4785 -- Has_Size_Clause (Flag29)
4786 -- Has_Specified_Layout (Flag100) (base type only)
4787 -- Has_Specified_Stream_Input (Flag190)
4788 -- Has_Specified_Stream_Output (Flag191)
4789 -- Has_Specified_Stream_Read (Flag192)
4790 -- Has_Specified_Stream_Write (Flag193)
4791 -- Has_Task (Flag30) (base type only)
4792 -- Has_Unchecked_Union (Flag123) (base type only)
4793 -- Has_Volatile_Components (Flag87) (base type only)
4795 -- Is_Abstract_Type (Flag146)
4796 -- Is_Asynchronous (Flag81)
4797 -- Is_Atomic (Flag85)
4798 -- Is_Constr_Subt_For_U_Nominal (Flag80)
4799 -- Is_Constr_Subt_For_UN_Aliased (Flag141)
4800 -- Is_Controlled (Flag42) (base type only)
4801 -- Is_Eliminated (Flag124)
4802 -- Is_Frozen (Flag4)
4803 -- Is_Generic_Actual_Type (Flag94)
4804 -- Is_RACW_Stub_Type (Flag244)
4805 -- Is_Non_Static_Subtype (Flag109)
4806 -- Is_Packed (Flag51) (base type only)
4807 -- Is_Private_Composite (Flag107)
4808 -- Is_Unsigned_Type (Flag144)
4809 -- Is_Volatile (Flag16)
4810 -- Itype_Printed (Flag202) (itypes only)
4811 -- Known_To_Have_Preelab_Init (Flag207)
4812 -- Must_Be_On_Byte_Boundary (Flag183)
4813 -- Must_Have_Preelab_Init (Flag208)
4814 -- OK_To_Reference (Flag249)
4815 -- Optimize_Alignment_Space (Flag241)
4816 -- Optimize_Alignment_Time (Flag242)
4817 -- Size_Depends_On_Discriminant (Flag177)
4818 -- Size_Known_At_Compile_Time (Flag92)
4819 -- Strict_Alignment (Flag145) (base type only)
4820 -- Suppress_Init_Proc (Flag105) (base type only)
4821 -- Treat_As_Volatile (Flag41)
4822 -- Universal_Aliasing (Flag216) (base type only)
4824 -- Alignment_Clause (synth)
4825 -- Base_Type (synth)
4826 -- Has_Private_Ancestor (synth)
4827 -- Implementation_Base_Type (synth)
4828 -- Invariant_Procedure (synth)
4829 -- Is_Access_Protected_Subprogram_Type (synth)
4830 -- Predicate_Function (synth)
4831 -- Root_Type (synth)
4832 -- Size_Clause (synth)
4834 ------------------------------------------
4835 -- Applicable attributes by entity kind --
4836 ------------------------------------------
4838 -- E_Access_Protected_Subprogram_Type
4839 -- Equivalent_Type (Node18)
4840 -- Directly_Designated_Type (Node20)
4841 -- Needs_No_Actuals (Flag22)
4842 -- Can_Use_Internal_Rep (Flag229)
4843 -- (plus type attributes)
4845 -- E_Access_Subprogram_Type
4846 -- Equivalent_Type (Node18) (remote types only)
4847 -- Directly_Designated_Type (Node20)
4848 -- Needs_No_Actuals (Flag22)
4849 -- Can_Use_Internal_Rep (Flag229)
4850 -- (plus type attributes)
4854 -- Storage_Size_Variable (Node15) (base type only)
4855 -- Master_Id (Node17)
4856 -- Directly_Designated_Type (Node20)
4857 -- Associated_Storage_Pool (Node22) (root type only)
4858 -- Associated_Final_Chain (Node23)
4859 -- Has_Pragma_Controlled (Flag27) (base type only)
4860 -- Has_Storage_Size_Clause (Flag23) (base type only)
4861 -- Is_Access_Constant (Flag69)
4862 -- Is_Local_Anonymous_Access (Flag194)
4863 -- Is_Pure_Unit_Access_Type (Flag189)
4864 -- No_Pool_Assigned (Flag131) (base type only)
4865 -- No_Strict_Aliasing (Flag136) (base type only)
4866 -- (plus type attributes)
4868 -- E_Access_Attribute_Type
4869 -- Directly_Designated_Type (Node20)
4870 -- (plus type attributes)
4873 -- Directly_Designated_Type (Node20)
4874 -- (plus type attributes)
4876 -- E_Anonymous_Access_Subprogram_Type
4877 -- E_Anonymous_Access_Protected_Subprogram_Type
4878 -- Storage_Size_Variable (Node15) ??? is this needed ???
4879 -- Directly_Designated_Type (Node20)
4880 -- Can_Use_Internal_Rep (Flag229)
4881 -- (plus type attributes)
4883 -- E_Anonymous_Access_Type
4884 -- Storage_Size_Variable (Node15) ??? is this needed ???
4885 -- Directly_Designated_Type (Node20)
4886 -- (plus type attributes)
4890 -- First_Index (Node17)
4891 -- Related_Array_Object (Node19)
4892 -- Component_Type (Node20) (base type only)
4893 -- Original_Array_Type (Node21)
4894 -- Component_Size (Uint22) (base type only)
4895 -- Packed_Array_Type (Node23)
4896 -- Component_Alignment (special) (base type only)
4897 -- Has_Component_Size_Clause (Flag68) (base type only)
4898 -- Is_Aliased (Flag15)
4899 -- Is_Constrained (Flag12)
4900 -- Next_Index (synth)
4901 -- Number_Dimensions (synth)
4902 -- (plus type attributes)
4905 -- Block_Node (Node11)
4906 -- First_Entity (Node17)
4907 -- Last_Entity (Node20)
4908 -- Finalization_Chain_Entity (Node19)
4909 -- Scope_Depth_Value (Uint22)
4910 -- Entry_Cancel_Parameter (Node23)
4911 -- Delay_Cleanups (Flag114)
4912 -- Discard_Names (Flag88)
4913 -- Has_Master_Entity (Flag21)
4914 -- Has_Nested_Block_With_Handler (Flag101)
4915 -- Sec_Stack_Needed_For_Return (Flag167)
4916 -- Uses_Sec_Stack (Flag95)
4917 -- Scope_Depth (synth)
4919 -- E_Class_Wide_Type
4920 -- E_Class_Wide_Subtype
4921 -- Direct_Primitive_Operations (Elist10)
4922 -- Cloned_Subtype (Node16) (subtype case only)
4923 -- First_Entity (Node17)
4924 -- Equivalent_Type (Node18) (always Empty for type)
4925 -- Last_Entity (Node20)
4926 -- First_Component (synth)
4927 -- First_Component_Or_Discriminant (synth)
4928 -- (plus type attributes)
4931 -- Normalized_First_Bit (Uint8)
4932 -- Current_Value (Node9) (always Empty)
4933 -- Normalized_Position_Max (Uint10)
4934 -- Component_Bit_Offset (Uint11)
4936 -- Component_Clause (Node13)
4937 -- Normalized_Position (Uint14)
4938 -- DT_Entry_Count (Uint15)
4939 -- Entry_Formal (Node16)
4941 -- Renamed_Object (Node18) (always Empty)
4942 -- Discriminant_Checking_Func (Node20)
4943 -- Interface_Name (Node21) (JGNAT usage only)
4944 -- Original_Record_Component (Node22)
4945 -- DT_Offset_To_Top_Func (Node25)
4946 -- Related_Type (Node27)
4947 -- Has_Biased_Representation (Flag139)
4948 -- Has_Per_Object_Constraint (Flag154)
4949 -- Is_Atomic (Flag85)
4951 -- Is_Volatile (Flag16)
4952 -- Treat_As_Volatile (Flag41)
4953 -- Is_Return_Object (Flag209)
4954 -- Next_Component (synth)
4955 -- Next_Component_Or_Discriminant (synth)
4959 -- Current_Value (Node9) (always Empty)
4960 -- Discriminal_Link (Node10) (discriminals only)
4961 -- Full_View (Node11)
4963 -- Alignment (Uint14)
4964 -- Actual_Subtype (Node17)
4965 -- Renamed_Object (Node18)
4966 -- Size_Check_Code (Node19) (constants only)
4967 -- Prival_Link (Node20) (privals only)
4968 -- Interface_Name (Node21)
4969 -- Related_Type (Node27) (constants only)
4970 -- Has_Alignment_Clause (Flag46)
4971 -- Has_Atomic_Components (Flag86)
4972 -- Has_Biased_Representation (Flag139)
4973 -- Has_Completion (Flag26) (constants only)
4974 -- Has_Thunks (Flag228) (constants only)
4975 -- Has_Size_Clause (Flag29)
4976 -- Has_Up_Level_Access (Flag215)
4977 -- Has_Volatile_Components (Flag87)
4978 -- Is_Atomic (Flag85)
4979 -- Is_Eliminated (Flag124)
4980 -- Is_Return_Object (Flag209)
4981 -- Is_True_Constant (Flag163)
4982 -- Is_Volatile (Flag16)
4983 -- Optimize_Alignment_Space (Flag241) (constants only)
4984 -- Optimize_Alignment_Time (Flag242) (constants only)
4985 -- Treat_As_Volatile (Flag41)
4986 -- Address_Clause (synth)
4987 -- Alignment_Clause (synth)
4988 -- Size_Clause (synth)
4990 -- E_Decimal_Fixed_Point_Type
4991 -- E_Decimal_Fixed_Subtype
4992 -- Scale_Value (Uint15)
4993 -- Digits_Value (Uint17)
4994 -- Scalar_Range (Node20)
4995 -- Delta_Value (Ureal18)
4996 -- Small_Value (Ureal21)
4997 -- Has_Machine_Radix_Clause (Flag83)
4998 -- Machine_Radix_10 (Flag84)
4999 -- Aft_Value (synth)
5000 -- Type_Low_Bound (synth)
5001 -- Type_High_Bound (synth)
5002 -- (plus type attributes)
5005 -- Normalized_First_Bit (Uint8)
5006 -- Current_Value (Node9) (always Empty)
5007 -- Normalized_Position_Max (Uint10)
5008 -- Component_Bit_Offset (Uint11)
5010 -- Component_Clause (Node13)
5011 -- Normalized_Position (Uint14)
5012 -- Discriminant_Number (Uint15)
5013 -- Discriminal (Node17)
5014 -- Renamed_Object (Node18) (always Empty)
5015 -- Corresponding_Discriminant (Node19)
5016 -- Discriminant_Default_Value (Node20)
5017 -- Interface_Name (Node21) (JGNAT usage only)
5018 -- Original_Record_Component (Node22)
5019 -- CR_Discriminant (Node23)
5020 -- Is_Return_Object (Flag209)
5021 -- Next_Component_Or_Discriminant (synth)
5022 -- Next_Discriminant (synth)
5023 -- Next_Stored_Discriminant (synth)
5027 -- Protected_Body_Subprogram (Node11)
5028 -- Barrier_Function (Node12)
5029 -- Entry_Parameters_Type (Node15)
5030 -- First_Entity (Node17)
5031 -- Alias (Node18) (for entry only. Empty)
5032 -- Finalization_Chain_Entity (Node19)
5033 -- Last_Entity (Node20)
5034 -- Accept_Address (Elist21)
5035 -- Scope_Depth_Value (Uint22)
5036 -- Protection_Object (Node23) (protected kind)
5037 -- Spec_PPC_List (Node24) (for entry only)
5038 -- PPC_Wrapper (Node25)
5039 -- Default_Expressions_Processed (Flag108)
5040 -- Entry_Accepted (Flag152)
5041 -- Is_AST_Entry (Flag132) (for entry only)
5042 -- Needs_No_Actuals (Flag22)
5043 -- Sec_Stack_Needed_For_Return (Flag167)
5044 -- Uses_Sec_Stack (Flag95)
5045 -- Address_Clause (synth)
5046 -- Entry_Index_Type (synth)
5047 -- First_Formal (synth)
5048 -- First_Formal_With_Extras (synth)
5049 -- Last_Formal (synth)
5050 -- Number_Formals (synth)
5051 -- Scope_Depth (synth)
5053 -- E_Entry_Index_Parameter
5054 -- Entry_Index_Constant (Node18)
5056 -- E_Enumeration_Literal
5057 -- Enumeration_Pos (Uint11)
5058 -- Enumeration_Rep (Uint12)
5060 -- Enumeration_Rep_Expr (Node22)
5061 -- Next_Literal (synth)
5063 -- E_Enumeration_Type
5064 -- E_Enumeration_Subtype
5065 -- Lit_Indexes (Node15) (root type only)
5066 -- Lit_Strings (Node16) (root type only)
5067 -- First_Literal (Node17)
5068 -- Scalar_Range (Node20)
5069 -- Enum_Pos_To_Rep (Node23) (type only)
5070 -- Has_Biased_Representation (Flag139)
5071 -- Has_Contiguous_Rep (Flag181)
5072 -- Has_Enumeration_Rep_Clause (Flag66)
5073 -- Has_Pragma_Ordered (Flag198) (base type only)
5074 -- Nonzero_Is_True (Flag162) (base type only)
5075 -- Type_Low_Bound (synth)
5076 -- Type_High_Bound (synth)
5077 -- (plus type attributes)
5081 -- Alignment (Uint14)
5082 -- Renamed_Entity (Node18)
5083 -- Register_Exception_Call (Node20)
5084 -- Interface_Name (Node21)
5085 -- Exception_Code (Uint22)
5086 -- Discard_Names (Flag88)
5087 -- Is_VMS_Exception (Flag133)
5088 -- Is_Raised (Flag224)
5091 -- Equivalent_Type (Node18)
5092 -- (plus type attributes)
5094 -- E_Floating_Point_Type
5095 -- E_Floating_Point_Subtype
5096 -- Digits_Value (Uint17)
5097 -- Scalar_Range (Node20)
5098 -- Type_Low_Bound (synth)
5099 -- Type_High_Bound (synth)
5100 -- (plus type attributes)
5103 -- E_Generic_Function
5104 -- Mechanism (Uint8) (Mechanism_Type)
5105 -- Renaming_Map (Uint9)
5106 -- Handler_Records (List10) (non-generic case only)
5107 -- Protected_Body_Subprogram (Node11)
5108 -- Next_Inlined_Subprogram (Node12)
5109 -- Corresponding_Equality (Node13) (implicit /= only)
5110 -- Elaboration_Entity (Node13) (all other cases)
5111 -- First_Optional_Parameter (Node14) (non-generic case only)
5112 -- DT_Position (Uint15)
5113 -- DTC_Entity (Node16)
5114 -- First_Entity (Node17)
5115 -- Alias (Node18) (non-generic case only)
5116 -- Renamed_Entity (Node18) (generic case only)
5117 -- Finalization_Chain_Entity (Node19)
5118 -- Last_Entity (Node20)
5119 -- Interface_Name (Node21)
5120 -- Scope_Depth_Value (Uint22)
5121 -- Generic_Renamings (Elist23) (for an instance)
5122 -- Inner_Instances (Elist23) (generic case only)
5123 -- Protection_Object (Node23) (for concurrent kind)
5124 -- Spec_PPC_List (Node24)
5125 -- Interface_Alias (Node25)
5126 -- Overridden_Operation (Node26)
5127 -- Wrapped_Entity (Node27) (non-generic case only)
5128 -- Extra_Formals (Node28)
5129 -- Subprograms_For_Type (Node29)
5130 -- Body_Needed_For_SAL (Flag40)
5131 -- Elaboration_Entity_Required (Flag174)
5132 -- Default_Expressions_Processed (Flag108)
5133 -- Delay_Cleanups (Flag114)
5134 -- Delay_Subprogram_Descriptors (Flag50)
5135 -- Discard_Names (Flag88)
5136 -- Has_Completion (Flag26)
5137 -- Has_Controlling_Result (Flag98)
5138 -- Has_Invariants (Flag232)
5139 -- Has_Master_Entity (Flag21)
5140 -- Has_Missing_Return (Flag142)
5141 -- Has_Nested_Block_With_Handler (Flag101)
5142 -- Has_Postconditions (Flag240)
5143 -- Has_Recursive_Call (Flag143)
5144 -- Has_Subprogram_Descriptor (Flag93)
5145 -- Is_Abstract_Subprogram (Flag19) (non-generic case only)
5146 -- Is_Called (Flag102) (non-generic case only)
5147 -- Is_Constructor (Flag76)
5148 -- Is_Discrim_SO_Function (Flag176)
5149 -- Is_Eliminated (Flag124)
5150 -- Is_Instantiated (Flag126) (generic case only)
5151 -- Is_Intrinsic_Subprogram (Flag64)
5152 -- Is_Machine_Code_Subprogram (Flag137) (non-generic case only)
5153 -- Is_Overriding_Operation (Flag39) (non-generic case only)
5154 -- Is_Primitive (Flag218)
5155 -- Is_Primitive_Wrapper (Flag195) (non-generic case only)
5156 -- Is_Private_Descendant (Flag53)
5157 -- Is_Private_Primitive (Flag245) (non-generic case only)
5159 -- Is_Thunk (Flag225)
5160 -- Is_Visible_Child_Unit (Flag116)
5161 -- Needs_No_Actuals (Flag22)
5162 -- Requires_Overriding (Flag213) (non-generic case only)
5163 -- Return_Present (Flag54)
5164 -- Returns_By_Ref (Flag90)
5165 -- Sec_Stack_Needed_For_Return (Flag167)
5166 -- Uses_Sec_Stack (Flag95)
5167 -- Address_Clause (synth)
5168 -- First_Formal (synth)
5169 -- First_Formal_With_Extras (synth)
5170 -- Last_Formal (synth)
5171 -- Number_Formals (synth)
5172 -- Scope_Depth (synth)
5174 -- E_General_Access_Type
5175 -- Storage_Size_Variable (Node15) (base type only)
5176 -- Master_Id (Node17)
5177 -- Directly_Designated_Type (Node20)
5178 -- Associated_Storage_Pool (Node22) (root type only)
5179 -- Associated_Final_Chain (Node23)
5180 -- (plus type attributes)
5182 -- E_Generic_In_Parameter
5183 -- E_Generic_In_Out_Parameter
5184 -- Current_Value (Node9) (always Empty)
5185 -- Entry_Component (Node11)
5186 -- Actual_Subtype (Node17)
5187 -- Renamed_Object (Node18) (always Empty)
5188 -- Default_Value (Node20)
5189 -- Protected_Formal (Node22)
5190 -- Is_Controlling_Formal (Flag97)
5191 -- Is_Return_Object (Flag209)
5192 -- Parameter_Mode (synth)
5194 -- E_Incomplete_Type
5195 -- E_Incomplete_Subtype
5196 -- Direct_Primitive_Operations (Elist10)
5197 -- Non_Limited_View (Node17)
5198 -- Private_Dependents (Elist18)
5199 -- Discriminant_Constraint (Elist21)
5200 -- Stored_Constraint (Elist23)
5201 -- (plus type attributes)
5204 -- E_In_Out_Parameter
5206 -- Mechanism (Uint8) (Mechanism_Type)
5207 -- Current_Value (Node9)
5208 -- Discriminal_Link (Node10) (discriminals only)
5209 -- Entry_Component (Node11)
5211 -- Extra_Accessibility (Node13)
5212 -- Alignment (Uint14)
5213 -- Extra_Formal (Node15)
5214 -- Unset_Reference (Node16)
5215 -- Actual_Subtype (Node17)
5216 -- Renamed_Object (Node18)
5217 -- Spec_Entity (Node19)
5218 -- Default_Value (Node20)
5219 -- Default_Expr_Function (Node21)
5220 -- Protected_Formal (Node22)
5221 -- Extra_Constrained (Node23)
5222 -- Last_Assignment (Node26) (OUT, IN-OUT only)
5223 -- Has_Initial_Value (Flag219)
5224 -- Is_Controlling_Formal (Flag97)
5225 -- Is_Only_Out_Parameter (Flag226)
5226 -- Is_Optional_Parameter (Flag134)
5227 -- Low_Bound_Tested (Flag205)
5228 -- Is_Return_Object (Flag209)
5229 -- Parameter_Mode (synth)
5232 -- Enclosing_Scope (Node18)
5233 -- Reachable (Flag49)
5235 -- E_Limited_Private_Type
5236 -- E_Limited_Private_Subtype
5237 -- First_Entity (Node17)
5238 -- Private_Dependents (Elist18)
5239 -- Underlying_Full_View (Node19)
5240 -- Last_Entity (Node20)
5241 -- Discriminant_Constraint (Elist21)
5242 -- Private_View (Node22)
5243 -- Stored_Constraint (Elist23)
5244 -- Has_Completion (Flag26)
5245 -- (plus type attributes)
5248 -- First_Exit_Statement (Node8)
5249 -- Has_Exit (Flag47)
5250 -- Has_Master_Entity (Flag21)
5251 -- Has_Nested_Block_With_Handler (Flag101)
5253 -- E_Modular_Integer_Type
5254 -- E_Modular_Integer_Subtype
5255 -- Modulus (Uint17) (base type only)
5256 -- Original_Array_Type (Node21)
5257 -- Scalar_Range (Node20)
5258 -- Non_Binary_Modulus (Flag58) (base type only)
5259 -- Has_Biased_Representation (Flag139)
5260 -- Type_Low_Bound (synth)
5261 -- Type_High_Bound (synth)
5262 -- (plus type attributes)
5269 -- First_Entity (Node17)
5271 -- Last_Entity (Node20)
5272 -- Subprograms_For_Type (Node29)
5273 -- Has_Invariants (Flag232)
5274 -- Has_Postconditions (Flag240)
5275 -- Is_Machine_Code_Subprogram (Flag137)
5277 -- Is_Intrinsic_Subprogram (Flag64)
5278 -- Is_Overriding_Operation (Flag39)
5279 -- Is_Primitive (Flag218)
5280 -- Is_Thunk (Flag225)
5281 -- Default_Expressions_Processed (Flag108)
5282 -- Aren't there more flags and fields? seems like this list should be
5283 -- more similar to the E_Function list, which is much longer ???
5285 -- E_Ordinary_Fixed_Point_Type
5286 -- E_Ordinary_Fixed_Point_Subtype
5287 -- Delta_Value (Ureal18)
5288 -- Scalar_Range (Node20)
5289 -- Small_Value (Ureal21)
5290 -- Has_Small_Clause (Flag67)
5291 -- Aft_Value (synth)
5292 -- Type_Low_Bound (synth)
5293 -- Type_High_Bound (synth)
5294 -- (plus type attributes)
5297 -- E_Generic_Package
5298 -- Dependent_Instances (Elist8) (for an instance)
5299 -- Renaming_Map (Uint9)
5300 -- Handler_Records (List10) (non-generic case only)
5301 -- Generic_Homonym (Node11) (generic case only)
5302 -- Associated_Formal_Package (Node12)
5303 -- Elaboration_Entity (Node13)
5304 -- Shadow_Entities (List14)
5305 -- Related_Instance (Node15) (non-generic case only)
5306 -- First_Private_Entity (Node16)
5307 -- First_Entity (Node17)
5308 -- Renamed_Entity (Node18)
5309 -- Body_Entity (Node19)
5310 -- Last_Entity (Node20)
5311 -- Interface_Name (Node21)
5312 -- Scope_Depth_Value (Uint22)
5313 -- Generic_Renamings (Elist23) (for an instance)
5314 -- Inner_Instances (Elist23) (generic case only)
5315 -- Limited_View (Node23) (non-generic/instance)
5316 -- Current_Use_Clause (Node27)
5317 -- Package_Instantiation (Node26)
5318 -- Delay_Subprogram_Descriptors (Flag50)
5319 -- Body_Needed_For_SAL (Flag40)
5320 -- Discard_Names (Flag88)
5321 -- Elaboration_Entity_Required (Flag174)
5322 -- Elaborate_Body_Desirable (Flag210) (non-generic case only)
5323 -- From_With_Type (Flag159)
5324 -- Has_All_Calls_Remote (Flag79)
5325 -- Has_Completion (Flag26)
5326 -- Has_Forward_Instantiation (Flag175)
5327 -- Has_Master_Entity (Flag21)
5328 -- Has_RACW (Flag214) (non-generic case only)
5329 -- Has_Subprogram_Descriptor (Flag93)
5330 -- In_Package_Body (Flag48)
5332 -- Is_Instantiated (Flag126)
5333 -- Is_Private_Descendant (Flag53)
5334 -- Is_Visible_Child_Unit (Flag116)
5335 -- Is_Wrapper_Package (synth) (non-generic case only)
5336 -- Renamed_In_Spec (Flag231) (non-generic case only)
5337 -- Scope_Depth (synth)
5338 -- Static_Elaboration_Desired (Flag77) (non-generic case only)
5341 -- Handler_Records (List10) (non-generic case only)
5342 -- Related_Instance (Node15) (non-generic case only)
5343 -- First_Entity (Node17)
5344 -- Spec_Entity (Node19)
5345 -- Last_Entity (Node20)
5346 -- Scope_Depth_Value (Uint22)
5347 -- Scope_Depth (synth)
5348 -- Delay_Subprogram_Descriptors (Flag50)
5349 -- Has_Subprogram_Descriptor (Flag93)
5352 -- E_Private_Subtype
5353 -- Direct_Primitive_Operations (Elist10)
5354 -- First_Entity (Node17)
5355 -- Private_Dependents (Elist18)
5356 -- Underlying_Full_View (Node19)
5357 -- Last_Entity (Node20)
5358 -- Discriminant_Constraint (Elist21)
5359 -- Private_View (Node22)
5360 -- Stored_Constraint (Elist23)
5361 -- Has_Completion (Flag26)
5362 -- Is_Controlled (Flag42) (base type only)
5363 -- Is_For_Access_Subtype (Flag118) (subtype only)
5364 -- (plus type attributes)
5367 -- E_Generic_Procedure
5368 -- Postcondition_Proc (Node8) (non-generic case only)
5369 -- Renaming_Map (Uint9)
5370 -- Handler_Records (List10) (non-generic case only)
5371 -- Protected_Body_Subprogram (Node11)
5372 -- Next_Inlined_Subprogram (Node12)
5373 -- Elaboration_Entity (Node13)
5374 -- First_Optional_Parameter (Node14) (non-generic case only)
5375 -- DT_Position (Uint15)
5376 -- DTC_Entity (Node16)
5377 -- First_Entity (Node17)
5378 -- Alias (Node18) (non-generic case only)
5379 -- Renamed_Entity (Node18) (generic case only)
5380 -- Finalization_Chain_Entity (Node19)
5381 -- Last_Entity (Node20)
5382 -- Interface_Name (Node21)
5383 -- Scope_Depth_Value (Uint22)
5384 -- Generic_Renamings (Elist23) (for an instance)
5385 -- Inner_Instances (Elist23) (generic case only)
5386 -- Protection_Object (Node23) (for concurrent kind)
5387 -- Spec_PPC_List (Node24)
5388 -- Interface_Alias (Node25)
5389 -- Static_Initialization (Node26) (init_proc only)
5390 -- Overridden_Operation (Node26) (never for init proc)
5391 -- Wrapped_Entity (Node27) (non-generic case only)
5392 -- Extra_Formals (Node28)
5393 -- Body_Needed_For_SAL (Flag40)
5394 -- Delay_Cleanups (Flag114)
5395 -- Discard_Names (Flag88)
5396 -- Elaboration_Entity_Required (Flag174)
5397 -- Default_Expressions_Processed (Flag108)
5398 -- Delay_Cleanups (Flag114)
5399 -- Delay_Subprogram_Descriptors (Flag50)
5400 -- Discard_Names (Flag88)
5401 -- Has_Completion (Flag26)
5402 -- Has_Invariants (Flag232)
5403 -- Has_Master_Entity (Flag21)
5404 -- Has_Nested_Block_With_Handler (Flag101)
5405 -- Has_Postconditions (Flag240)
5406 -- Has_Subprogram_Descriptor (Flag93)
5407 -- Is_Abstract_Subprogram (Flag19) (non-generic case only)
5408 -- Is_Asynchronous (Flag81)
5409 -- Is_Called (Flag102) (non-generic case only)
5410 -- Is_Constructor (Flag76)
5411 -- Is_Eliminated (Flag124)
5412 -- Is_Instantiated (Flag126) (generic case only)
5413 -- Is_Interrupt_Handler (Flag89)
5414 -- Is_Intrinsic_Subprogram (Flag64)
5415 -- Is_Machine_Code_Subprogram (Flag137) (non-generic case only)
5416 -- Is_Null_Init_Proc (Flag178)
5417 -- Is_Overriding_Operation (Flag39) (non-generic case only)
5418 -- Is_Primitive (Flag218)
5419 -- Is_Primitive_Wrapper (Flag195) (non-generic case only)
5420 -- Is_Private_Descendant (Flag53)
5421 -- Is_Private_Primitive (Flag245) (non-generic case only)
5423 -- Is_Thunk (Flag225)
5424 -- Is_Valued_Procedure (Flag127)
5425 -- Is_Visible_Child_Unit (Flag116)
5426 -- Needs_No_Actuals (Flag22)
5427 -- No_Return (Flag113)
5428 -- Requires_Overriding (Flag213) (non-generic case only)
5429 -- Sec_Stack_Needed_For_Return (Flag167)
5430 -- Address_Clause (synth)
5431 -- First_Formal (synth)
5432 -- First_Formal_With_Extras (synth)
5433 -- Last_Formal (synth)
5434 -- Number_Formals (synth)
5437 -- (any others??? First/Last Entity, Scope_Depth???)
5439 -- E_Protected_Object
5442 -- E_Protected_Subtype
5443 -- Direct_Primitive_Operations (Elist10)
5444 -- Entry_Bodies_Array (Node15)
5445 -- First_Private_Entity (Node16)
5446 -- First_Entity (Node17)
5447 -- Corresponding_Record_Type (Node18)
5448 -- Finalization_Chain_Entity (Node19)
5449 -- Last_Entity (Node20)
5450 -- Discriminant_Constraint (Elist21)
5451 -- Scope_Depth_Value (Uint22)
5452 -- Scope_Depth (synth)
5453 -- Stored_Constraint (Elist23)
5454 -- Has_Interrupt_Handler (synth)
5455 -- Sec_Stack_Needed_For_Return (Flag167) ???
5456 -- Uses_Sec_Stack (Flag95) ???
5457 -- Has_Entries (synth)
5458 -- Number_Entries (synth)
5462 -- Direct_Primitive_Operations (Elist10)
5463 -- Access_Disp_Table (Elist16) (base type only)
5464 -- Cloned_Subtype (Node16) (subtype case only)
5465 -- First_Entity (Node17)
5466 -- Corresponding_Concurrent_Type (Node18)
5467 -- Parent_Subtype (Node19) (base type only)
5468 -- Last_Entity (Node20)
5469 -- Discriminant_Constraint (Elist21)
5470 -- Corresponding_Remote_Type (Node22)
5471 -- Stored_Constraint (Elist23)
5472 -- Interfaces (Elist25)
5473 -- Dispatch_Table_Wrappers (Elist26) (base type only)
5474 -- Underlying_Record_View (Node28) (base type only)
5475 -- Component_Alignment (special) (base type only)
5476 -- C_Pass_By_Copy (Flag125) (base type only)
5477 -- Has_Dispatch_Table (Flag220) (base tagged type only)
5478 -- Has_External_Tag_Rep_Clause (Flag110)
5479 -- Has_Record_Rep_Clause (Flag65) (base type only)
5480 -- Has_Static_Discriminants (Flag211) (subtype only)
5481 -- Is_Class_Wide_Equivalent_Type (Flag35)
5482 -- Is_Concurrent_Record_Type (Flag20)
5483 -- Is_Constrained (Flag12)
5484 -- Is_Controlled (Flag42) (base type only)
5485 -- Is_Interface (Flag186)
5486 -- Is_Limited_Interface (Flag197)
5487 -- OK_To_Reorder_Components (Flag239) (base type only)
5488 -- Reverse_Bit_Order (Flag164) (base type only)
5489 -- First_Component (synth)
5490 -- First_Component_Or_Discriminant (synth)
5491 -- (plus type attributes)
5493 -- E_Record_Type_With_Private
5494 -- E_Record_Subtype_With_Private
5495 -- Direct_Primitive_Operations (Elist10)
5496 -- Access_Disp_Table (Elist16) (base type only)
5497 -- First_Entity (Node17)
5498 -- Private_Dependents (Elist18)
5499 -- Underlying_Full_View (Node19)
5500 -- Last_Entity (Node20)
5501 -- Discriminant_Constraint (Elist21)
5502 -- Private_View (Node22)
5503 -- Stored_Constraint (Elist23)
5504 -- Interfaces (Elist25)
5505 -- Dispatch_Table_Wrappers (Elist26) (base type only)
5506 -- Has_Completion (Flag26)
5507 -- Has_Record_Rep_Clause (Flag65) (base type only)
5508 -- Has_External_Tag_Rep_Clause (Flag110)
5509 -- Is_Concurrent_Record_Type (Flag20)
5510 -- Is_Constrained (Flag12)
5511 -- Is_Controlled (Flag42) (base type only)
5512 -- Is_Interface (Flag186)
5513 -- Is_Limited_Interface (Flag197)
5514 -- OK_To_Reorder_Components (Flag239) (base type only)
5515 -- Reverse_Bit_Order (Flag164) (base type only)
5516 -- First_Component (synth)
5517 -- First_Component_Or_Discriminant (synth)
5518 -- (plus type attributes)
5520 -- E_Return_Statement
5521 -- Return_Applies_To (Node8)
5522 -- Finalization_Chain_Entity (Node19)
5524 -- E_Signed_Integer_Type
5525 -- E_Signed_Integer_Subtype
5526 -- Scalar_Range (Node20)
5527 -- Has_Biased_Representation (Flag139)
5528 -- Type_Low_Bound (synth)
5529 -- Type_High_Bound (synth)
5530 -- (plus type attributes)
5534 -- First_Index (Node17)
5535 -- Component_Type (Node20) (base type only)
5536 -- Is_Constrained (Flag12)
5537 -- Next_Index (synth)
5538 -- Number_Dimensions (synth)
5539 -- (plus type attributes)
5541 -- E_String_Literal_Subtype
5542 -- String_Literal_Low_Bound (Node15)
5543 -- String_Literal_Length (Uint16)
5544 -- First_Index (Node17) (always Empty)
5545 -- Packed_Array_Type (Node23)
5546 -- (plus type attributes)
5548 -- E_Subprogram_Body
5549 -- Mechanism (Uint8)
5550 -- First_Entity (Node17)
5551 -- Corresponding_Protected_Entry (Node18)
5552 -- Last_Entity (Node20)
5553 -- Scope_Depth_Value (Uint22)
5554 -- Scope_Depth (synth)
5556 -- E_Subprogram_Type
5557 -- Directly_Designated_Type (Node20)
5558 -- First_Formal (synth)
5559 -- First_Formal_With_Extras (synth)
5560 -- Last_Formal (synth)
5561 -- Number_Formals (synth)
5562 -- (plus type attributes)
5565 -- (any others??? First/Last Entity, Scope_Depth???)
5569 -- Direct_Primitive_Operations (Elist10)
5570 -- Storage_Size_Variable (Node15) (base type only)
5571 -- First_Private_Entity (Node16)
5572 -- First_Entity (Node17)
5573 -- Corresponding_Record_Type (Node18)
5574 -- Finalization_Chain_Entity (Node19)
5575 -- Last_Entity (Node20)
5576 -- Discriminant_Constraint (Elist21)
5577 -- Scope_Depth_Value (Uint22)
5578 -- Scope_Depth (synth)
5579 -- Stored_Constraint (Elist23)
5580 -- Task_Body_Procedure (Node25)
5581 -- Delay_Cleanups (Flag114)
5582 -- Has_Master_Entity (Flag21)
5583 -- Has_Storage_Size_Clause (Flag23) (base type only)
5584 -- Uses_Sec_Stack (Flag95) ???
5585 -- Sec_Stack_Needed_For_Return (Flag167) ???
5586 -- Has_Entries (synth)
5587 -- Number_Entries (synth)
5588 -- Relative_Deadline_Variable (Node26) (base type only)
5589 -- (plus type attributes)
5592 -- Hiding_Loop_Variable (Node8)
5593 -- Current_Value (Node9)
5595 -- Extra_Accessibility (Node13)
5596 -- Alignment (Uint14)
5597 -- Unset_Reference (Node16)
5598 -- Actual_Subtype (Node17)
5599 -- Renamed_Object (Node18)
5600 -- Size_Check_Code (Node19)
5601 -- Prival_Link (Node20)
5602 -- Interface_Name (Node21)
5603 -- Shared_Var_Procs_Instance (Node22)
5604 -- Extra_Constrained (Node23)
5605 -- Related_Expression (Node24)
5606 -- Debug_Renaming_Link (Node25)
5607 -- Last_Assignment (Node26)
5608 -- Related_Type (Node27)
5609 -- Has_Alignment_Clause (Flag46)
5610 -- Has_Atomic_Components (Flag86)
5611 -- Has_Biased_Representation (Flag139)
5612 -- Has_Initial_Value (Flag219)
5613 -- Has_Size_Clause (Flag29)
5614 -- Has_Up_Level_Access (Flag215)
5615 -- Has_Volatile_Components (Flag87)
5616 -- Is_Atomic (Flag85)
5617 -- Is_Eliminated (Flag124)
5618 -- Is_Shared_Passive (Flag60)
5619 -- Is_True_Constant (Flag163)
5620 -- Is_Volatile (Flag16)
5621 -- Is_Return_Object (Flag209)
5622 -- OK_To_Rename (Flag247)
5623 -- Optimize_Alignment_Space (Flag241)
5624 -- Optimize_Alignment_Time (Flag242)
5625 -- Treat_As_Volatile (Flag41)
5626 -- Address_Clause (synth)
5627 -- Alignment_Clause (synth)
5628 -- Size_Clause (synth)
5631 -- Since E_Void is the initial Ekind value of an entity when it is first
5632 -- created, one might expect that no attributes would be defined on such
5633 -- an entity until its Ekind field is set. However, in practice, there
5634 -- are many instances in which fields of an E_Void entity are set in the
5635 -- code prior to setting the Ekind field. This is not well documented or
5636 -- well controlled, and needs cleaning up later. Meanwhile, the access
5637 -- procedures in the body of Einfo permit many, but not all, attributes
5638 -- to be applied to an E_Void entity, precisely so that this kind of
5639 -- pre-setting of attributes works. This is really a hole in the dynamic
5640 -- type checking, since there is no assurance that the eventual Ekind
5641 -- value will be appropriate for the attributes set, and the consequence
5642 -- is that the dynamic type checking in the Einfo body is unnecessarily
5643 -- weak. To be looked at systematically some time ???
5645 ---------------------------------
5646 -- Component_Alignment Control --
5647 ---------------------------------
5649 -- There are four types of alignment possible for array and record
5650 -- types, and a field in the type entities contains a value of the
5651 -- following type indicating which alignment choice applies. For full
5652 -- details of the meaning of these alignment types, see description
5653 -- of the Component_Alignment pragma
5655 type Component_Alignment_Kind is (
5656 Calign_Default, -- default alignment
5657 Calign_Component_Size, -- natural alignment for component size
5658 Calign_Component_Size_4, -- natural for size <= 4, 4 for size >= 4
5659 Calign_Storage_Unit); -- all components byte aligned
5665 -- In addition to attributes that are stored as plain data, other
5666 -- attributes are procedural, and require some small amount of
5667 -- computation. Of course, from the point of view of a user of this
5668 -- package, the distinction is not visible (even the field information
5669 -- provided below should be disregarded, as it is subject to change
5670 -- without notice!). A number of attributes appear as lists: lists of
5671 -- formals, lists of actuals, of discriminants, etc. For these, pairs
5672 -- of functions are defined, which take the form:
5674 -- function First_Thing (E : Enclosing_Construct) return Thing;
5675 -- function Next_Thing (T : Thing) return Thing;
5677 -- The end of iteration is always signaled by a value of Empty, so that
5678 -- loops over these chains invariably have the form:
5682 -- This := First_Thing (E);
5684 -- while Present (This) loop
5685 -- Do_Something_With (This);
5687 -- This := Next_Thing (This);
5690 -----------------------------------
5691 -- Handling of Check Suppression --
5692 -----------------------------------
5694 -- There are three ways that checks can be suppressed:
5696 -- 1. At the command line level
5697 -- 2. At the scope level.
5698 -- 3. At the entity level.
5700 -- See spec of Sem in sem.ads for details of the data structures used
5701 -- to keep track of these various methods for suppressing checks.
5703 -------------------------------
5704 -- Handling of Discriminants --
5705 -------------------------------
5707 -- During semantic processing, discriminants are separate entities which
5708 -- reflect the semantic properties and allowed usage of discriminants in
5711 -- In the case of discriminants used as bounds, the references are handled
5712 -- directly, since special processing is needed in any case. However, there
5713 -- are two circumstances in which discriminants are referenced in a quite
5714 -- general manner, like any other variables:
5716 -- In initialization expressions for records. Note that the expressions
5717 -- used in Priority, Storage_Size, Task_Info and Relative_Deadline
5718 -- pragmas are effectively in this category, since these pragmas are
5719 -- converted to initialized record fields in the Corresponding_Record_
5722 -- In task and protected bodies, where the discriminant values may be
5723 -- referenced freely within these bodies. Discriminants can also appear
5724 -- in bounds of entry families and in defaults of operations.
5726 -- In both these cases, the discriminants must be treated essentially as
5727 -- objects. The following approach is used to simplify and minimize the
5728 -- special processing that is required.
5730 -- When a record type with discriminants is analyzed, semantic processing
5731 -- creates the entities for the discriminants. It also creates additional
5732 -- sets of entities called discriminals, one for each of the discriminants,
5733 -- and the Discriminal field of the discriminant entity points to this
5734 -- additional entity, which is initially created as an uninitialized
5737 -- During expansion of expressions, any discriminant reference is replaced
5738 -- by a reference to the corresponding discriminal. When the initialization
5739 -- procedure for the record is created (there will always be one, since
5740 -- discriminants are present, see Exp_Ch3 for further details), the
5741 -- discriminals are used as the entities for the formal parameters of
5742 -- this initialization procedure. The references to these discriminants
5743 -- have already been replaced by references to these discriminals, which
5744 -- are now the formal parameters corresponding to the required objects.
5746 -- In the case of a task or protected body, the semantics similarly creates
5747 -- a set of discriminals for the discriminants of the task or protected
5748 -- type. When the procedure is created for the task body, the parameter
5749 -- passed in is a reference to the task value type, which contains the
5750 -- required discriminant values. The expander creates a set of declarations
5753 -- discr_nameD : constant discr_type renames _task.discr_name;
5755 -- where discr_nameD is the discriminal entity referenced by the task
5756 -- discriminant, and _task is the task value passed in as the parameter.
5757 -- Again, any references to discriminants in the task body have been
5758 -- replaced by the discriminal reference, which is now an object that
5759 -- contains the required value.
5761 -- This approach for tasks means that two sets of discriminals are needed
5762 -- for a task type, one for the initialization procedure, and one for the
5763 -- task body. This works out nicely, since the semantics allocates one set
5764 -- for the task itself, and one set for the corresponding record.
5766 -- The one bit of trickiness arises in making sure that the right set of
5767 -- discriminals is used at the right time. First the task definition is
5768 -- processed. Any references to discriminants here are replaced by the
5769 -- corresponding *task* discriminals (the record type doesn't even exist
5770 -- yet, since it is constructed as part of the expansion of the task
5771 -- declaration, which happens after the semantic processing of the task
5772 -- definition). The discriminants to be used for the corresponding record
5773 -- are created at the same time as the other discriminals, and held in the
5774 -- CR_Discriminant field of the discriminant. A use of the discriminant in
5775 -- a bound for an entry family is replaced with the CR_Discriminant because
5776 -- it controls the bound of the entry queue array which is a component of
5777 -- the corresponding record.
5779 -- Just before the record initialization routine is constructed, the
5780 -- expander exchanges the task and record discriminals. This has two
5781 -- effects. First the generation of the record initialization routine
5782 -- uses the discriminals that are now on the record, which is the set
5783 -- that used to be on the task, which is what we want.
5785 -- Second, a new set of (so far unused) discriminals is now on the task
5786 -- discriminants, and it is this set that will be used for expanding the
5787 -- task body, and also for the discriminal declarations at the start of
5790 ---------------------------------------------------
5791 -- Handling of private data in protected objects --
5792 ---------------------------------------------------
5794 -- Private components in protected types pose problems similar to those
5795 -- of discriminants. Private data is visible and can be directly referenced
5796 -- from protected bodies. However, when protected entries and subprograms
5797 -- are expanded into corresponding bodies and barrier functions, private
5798 -- components lose their original context and visibility.
5800 -- To remedy this side effect of expansion, private components are expanded
5801 -- into renamings called "privals", by analogy with "discriminals".
5803 -- private_comp : comp_type renames _object.private_comp;
5805 -- Prival declarations are inserted during the analysis of subprogram and
5806 -- entry bodies to ensure proper visibility for any subsequent expansion.
5807 -- _Object is the formal parameter of the generated corresponding body or
5808 -- a local renaming which denotes the protected object obtained from entry
5809 -- parameter _O. Privals receive minimal decoration upon creation and are
5810 -- categorized as either E_Variable for the general case or E_Constant when
5811 -- they appear in functions.
5813 -- Along with the local declarations, each private component carries a
5814 -- placeholder which references the prival entity in the current body. This
5815 -- form of indirection is used to resolve name clashes of privals and other
5816 -- locally visible entities such as parameters, local objects, entry family
5817 -- indexes or identifiers used in the barrier condition.
5819 -- When analyzing the statements of a protected subprogram or entry, any
5820 -- reference to a private component must resolve to the locally declared
5821 -- prival through normal visibility. In case of name conflicts (the cases
5822 -- above), the prival is marked as hidden and acts as a weakly declared
5823 -- entity. As a result, the reference points to the correct entity. When a
5824 -- private component is denoted by an expanded name (prot_type.comp for
5825 -- example), the expansion mechanism uses the placeholder of the component
5826 -- to correct the Entity and Etype of the reference.
5832 -- The following type synonyms are used to tidy up the function and
5833 -- procedure declarations that follow, and also to make it possible to meet
5834 -- the requirement for the XEINFO utility that all function specs must fit
5835 -- on a single source line.
5837 subtype B is Boolean;
5838 subtype C is Component_Alignment_Kind;
5839 subtype E is Entity_Id;
5840 subtype M is Mechanism_Type;
5841 subtype N is Node_Id;
5844 subtype L is Elist_Id;
5845 subtype S is List_Id;
5847 --------------------------------
5848 -- Attribute Access Functions --
5849 --------------------------------
5851 -- All attributes are manipulated through a procedural interface. This
5852 -- section contains the functions used to obtain attribute values which
5853 -- correspond to values in fields or flags in the entity itself.
5855 function Accept_Address (Id : E) return L;
5856 function Access_Disp_Table (Id : E) return L;
5857 function Actual_Subtype (Id : E) return E;
5858 function Address_Taken (Id : E) return B;
5859 function Alias (Id : E) return E;
5860 function Alignment (Id : E) return U;
5861 function Associated_Final_Chain (Id : E) return E;
5862 function Associated_Formal_Package (Id : E) return E;
5863 function Associated_Node_For_Itype (Id : E) return N;
5864 function Associated_Storage_Pool (Id : E) return E;
5865 function Barrier_Function (Id : E) return N;
5866 function Block_Node (Id : E) return N;
5867 function Body_Entity (Id : E) return E;
5868 function Body_Needed_For_SAL (Id : E) return B;
5869 function CR_Discriminant (Id : E) return E;
5870 function C_Pass_By_Copy (Id : E) return B;
5871 function Can_Never_Be_Null (Id : E) return B;
5872 function Checks_May_Be_Suppressed (Id : E) return B;
5873 function Class_Wide_Type (Id : E) return E;
5874 function Cloned_Subtype (Id : E) return E;
5875 function Component_Alignment (Id : E) return C;
5876 function Component_Clause (Id : E) return N;
5877 function Component_Bit_Offset (Id : E) return U;
5878 function Component_Size (Id : E) return U;
5879 function Component_Type (Id : E) return E;
5880 function Corresponding_Concurrent_Type (Id : E) return E;
5881 function Corresponding_Discriminant (Id : E) return E;
5882 function Corresponding_Equality (Id : E) return E;
5883 function Corresponding_Protected_Entry (Id : E) return E;
5884 function Corresponding_Record_Type (Id : E) return E;
5885 function Corresponding_Remote_Type (Id : E) return E;
5886 function Current_Use_Clause (Id : E) return E;
5887 function Current_Value (Id : E) return N;
5888 function Debug_Info_Off (Id : E) return B;
5889 function Debug_Renaming_Link (Id : E) return E;
5890 function Dispatch_Table_Wrappers (Id : E) return L;
5891 function DTC_Entity (Id : E) return E;
5892 function DT_Entry_Count (Id : E) return U;
5893 function DT_Offset_To_Top_Func (Id : E) return E;
5894 function DT_Position (Id : E) return U;
5895 function Default_Expr_Function (Id : E) return E;
5896 function Default_Expressions_Processed (Id : E) return B;
5897 function Default_Value (Id : E) return N;
5898 function Delay_Cleanups (Id : E) return B;
5899 function Delay_Subprogram_Descriptors (Id : E) return B;
5900 function Delta_Value (Id : E) return R;
5901 function Dependent_Instances (Id : E) return L;
5902 function Depends_On_Private (Id : E) return B;
5903 function Digits_Value (Id : E) return U;
5904 function Directly_Designated_Type (Id : E) return E;
5905 function Discard_Names (Id : E) return B;
5906 function Discriminal (Id : E) return E;
5907 function Discriminal_Link (Id : E) return E;
5908 function Discriminant_Checking_Func (Id : E) return E;
5909 function Discriminant_Constraint (Id : E) return L;
5910 function Discriminant_Default_Value (Id : E) return N;
5911 function Discriminant_Number (Id : E) return U;
5912 function Elaborate_Body_Desirable (Id : E) return B;
5913 function Elaboration_Entity (Id : E) return E;
5914 function Elaboration_Entity_Required (Id : E) return B;
5915 function Enclosing_Scope (Id : E) return E;
5916 function Entry_Accepted (Id : E) return B;
5917 function Entry_Bodies_Array (Id : E) return E;
5918 function Entry_Cancel_Parameter (Id : E) return E;
5919 function Entry_Component (Id : E) return E;
5920 function Entry_Formal (Id : E) return E;
5921 function Entry_Index_Constant (Id : E) return E;
5922 function Entry_Index_Type (Id : E) return E;
5923 function Entry_Parameters_Type (Id : E) return E;
5924 function Enum_Pos_To_Rep (Id : E) return E;
5925 function Enumeration_Pos (Id : E) return U;
5926 function Enumeration_Rep (Id : E) return U;
5927 function Enumeration_Rep_Expr (Id : E) return N;
5928 function Equivalent_Type (Id : E) return E;
5929 function Esize (Id : E) return U;
5930 function Exception_Code (Id : E) return U;
5931 function Extra_Accessibility (Id : E) return E;
5932 function Extra_Constrained (Id : E) return E;
5933 function Extra_Formal (Id : E) return E;
5934 function Extra_Formals (Id : E) return E;
5935 function Can_Use_Internal_Rep (Id : E) return B;
5936 function Finalization_Chain_Entity (Id : E) return E;
5937 function Finalize_Storage_Only (Id : E) return B;
5938 function First_Entity (Id : E) return E;
5939 function First_Exit_Statement (Id : E) return N;
5940 function First_Index (Id : E) return N;
5941 function First_Literal (Id : E) return E;
5942 function First_Optional_Parameter (Id : E) return E;
5943 function First_Private_Entity (Id : E) return E;
5944 function First_Rep_Item (Id : E) return N;
5945 function Freeze_Node (Id : E) return N;
5946 function From_With_Type (Id : E) return B;
5947 function Full_View (Id : E) return E;
5948 function Generic_Homonym (Id : E) return E;
5949 function Generic_Renamings (Id : E) return L;
5950 function Handler_Records (Id : E) return S;
5951 function Has_Aliased_Components (Id : E) return B;
5952 function Has_Alignment_Clause (Id : E) return B;
5953 function Has_All_Calls_Remote (Id : E) return B;
5954 function Has_Anon_Block_Suffix (Id : E) return B;
5955 function Has_Atomic_Components (Id : E) return B;
5956 function Has_Biased_Representation (Id : E) return B;
5957 function Has_Completion (Id : E) return B;
5958 function Has_Completion_In_Body (Id : E) return B;
5959 function Has_Complex_Representation (Id : E) return B;
5960 function Has_Component_Size_Clause (Id : E) return B;
5961 function Has_Constrained_Partial_View (Id : E) return B;
5962 function Has_Contiguous_Rep (Id : E) return B;
5963 function Has_Controlled_Component (Id : E) return B;
5964 function Has_Controlling_Result (Id : E) return B;
5965 function Has_Convention_Pragma (Id : E) return B;
5966 function Has_Delayed_Aspects (Id : E) return B;
5967 function Has_Delayed_Freeze (Id : E) return B;
5968 function Has_Discriminants (Id : E) return B;
5969 function Has_Dispatch_Table (Id : E) return B;
5970 function Has_Enumeration_Rep_Clause (Id : E) return B;
5971 function Has_Exit (Id : E) return B;
5972 function Has_External_Tag_Rep_Clause (Id : E) return B;
5973 function Has_Fully_Qualified_Name (Id : E) return B;
5974 function Has_Gigi_Rep_Item (Id : E) return B;
5975 function Has_Homonym (Id : E) return B;
5976 function Has_Inheritable_Invariants (Id : E) return B;
5977 function Has_Initial_Value (Id : E) return B;
5978 function Has_Invariants (Id : E) return B;
5979 function Has_Interrupt_Handler (Id : E) return B;
5980 function Has_Machine_Radix_Clause (Id : E) return B;
5981 function Has_Master_Entity (Id : E) return B;
5982 function Has_Missing_Return (Id : E) return B;
5983 function Has_Nested_Block_With_Handler (Id : E) return B;
5984 function Has_Forward_Instantiation (Id : E) return B;
5985 function Has_Up_Level_Access (Id : E) return B;
5986 function Has_Non_Standard_Rep (Id : E) return B;
5987 function Has_Object_Size_Clause (Id : E) return B;
5988 function Has_Per_Object_Constraint (Id : E) return B;
5989 function Has_Persistent_BSS (Id : E) return B;
5990 function Has_Postconditions (Id : E) return B;
5991 function Has_Pragma_Controlled (Id : E) return B;
5992 function Has_Pragma_Elaborate_Body (Id : E) return B;
5993 function Has_Pragma_Inline (Id : E) return B;
5994 function Has_Pragma_Inline_Always (Id : E) return B;
5995 function Has_Pragma_Ordered (Id : E) return B;
5996 function Has_Pragma_Pack (Id : E) return B;
5997 function Has_Pragma_Preelab_Init (Id : E) return B;
5998 function Has_Pragma_Pure (Id : E) return B;
5999 function Has_Pragma_Pure_Function (Id : E) return B;
6000 function Has_Pragma_Thread_Local_Storage (Id : E) return B;
6001 function Has_Pragma_Unmodified (Id : E) return B;
6002 function Has_Pragma_Unreferenced (Id : E) return B;
6003 function Has_Pragma_Unreferenced_Objects (Id : E) return B;
6004 function Has_Predicates (Id : E) return B;
6005 function Has_Primitive_Operations (Id : E) return B;
6006 function Has_Qualified_Name (Id : E) return B;
6007 function Has_RACW (Id : E) return B;
6008 function Has_Record_Rep_Clause (Id : E) return B;
6009 function Has_Recursive_Call (Id : E) return B;
6010 function Has_Size_Clause (Id : E) return B;
6011 function Has_Small_Clause (Id : E) return B;
6012 function Has_Specified_Layout (Id : E) return B;
6013 function Has_Specified_Stream_Input (Id : E) return B;
6014 function Has_Specified_Stream_Output (Id : E) return B;
6015 function Has_Specified_Stream_Read (Id : E) return B;
6016 function Has_Specified_Stream_Write (Id : E) return B;
6017 function Has_Static_Discriminants (Id : E) return B;
6018 function Has_Storage_Size_Clause (Id : E) return B;
6019 function Has_Stream_Size_Clause (Id : E) return B;
6020 function Has_Subprogram_Descriptor (Id : E) return B;
6021 function Has_Task (Id : E) return B;
6022 function Has_Thunks (Id : E) return B;
6023 function Has_Unchecked_Union (Id : E) return B;
6024 function Has_Unknown_Discriminants (Id : E) return B;
6025 function Has_Volatile_Components (Id : E) return B;
6026 function Has_Xref_Entry (Id : E) return B;
6027 function Hiding_Loop_Variable (Id : E) return E;
6028 function Homonym (Id : E) return E;
6029 function In_Package_Body (Id : E) return B;
6030 function In_Private_Part (Id : E) return B;
6031 function In_Use (Id : E) return B;
6032 function Inner_Instances (Id : E) return L;
6033 function Interface_Alias (Id : E) return E;
6034 function Interfaces (Id : E) return L;
6035 function Interface_Name (Id : E) return N;
6036 function Is_AST_Entry (Id : E) return B;
6037 function Is_Abstract_Subprogram (Id : E) return B;
6038 function Is_Abstract_Type (Id : E) return B;
6039 function Is_Access_Constant (Id : E) return B;
6040 function Is_Ada_2005_Only (Id : E) return B;
6041 function Is_Ada_2012_Only (Id : E) return B;
6042 function Is_Aliased (Id : E) return B;
6043 function Is_Asynchronous (Id : E) return B;
6044 function Is_Atomic (Id : E) return B;
6045 function Is_Bit_Packed_Array (Id : E) return B;
6046 function Is_CPP_Class (Id : E) return B;
6047 function Is_Called (Id : E) return B;
6048 function Is_Character_Type (Id : E) return B;
6049 function Is_Child_Unit (Id : E) return B;
6050 function Is_Class_Wide_Equivalent_Type (Id : E) return B;
6051 function Is_Compilation_Unit (Id : E) return B;
6052 function Is_Completely_Hidden (Id : E) return B;
6053 function Is_Constr_Subt_For_UN_Aliased (Id : E) return B;
6054 function Is_Constr_Subt_For_U_Nominal (Id : E) return B;
6055 function Is_Constrained (Id : E) return B;
6056 function Is_Constructor (Id : E) return B;
6057 function Is_Controlled (Id : E) return B;
6058 function Is_Controlling_Formal (Id : E) return B;
6059 function Is_Discrim_SO_Function (Id : E) return B;
6060 function Is_Dispatch_Table_Entity (Id : E) return B;
6061 function Is_Dispatching_Operation (Id : E) return B;
6062 function Is_Eliminated (Id : E) return B;
6063 function Is_Entry_Formal (Id : E) return B;
6064 function Is_Exported (Id : E) return B;
6065 function Is_First_Subtype (Id : E) return B;
6066 function Is_For_Access_Subtype (Id : E) return B;
6067 function Is_Frozen (Id : E) return B;
6068 function Is_Generic_Instance (Id : E) return B;
6069 function Is_Hidden (Id : E) return B;
6070 function Is_Hidden_Open_Scope (Id : E) return B;
6071 function Is_Immediately_Visible (Id : E) return B;
6072 function Is_Imported (Id : E) return B;
6073 function Is_Inlined (Id : E) return B;
6074 function Is_Interface (Id : E) return B;
6075 function Is_Instantiated (Id : E) return B;
6076 function Is_Internal (Id : E) return B;
6077 function Is_Interrupt_Handler (Id : E) return B;
6078 function Is_Intrinsic_Subprogram (Id : E) return B;
6079 function Is_Itype (Id : E) return B;
6080 function Is_Known_Non_Null (Id : E) return B;
6081 function Is_Known_Null (Id : E) return B;
6082 function Is_Known_Valid (Id : E) return B;
6083 function Is_Limited_Composite (Id : E) return B;
6084 function Is_Limited_Interface (Id : E) return B;
6085 function Is_Local_Anonymous_Access (Id : E) return B;
6086 function Is_Machine_Code_Subprogram (Id : E) return B;
6087 function Is_Non_Static_Subtype (Id : E) return B;
6088 function Is_Null_Init_Proc (Id : E) return B;
6089 function Is_Obsolescent (Id : E) return B;
6090 function Is_Only_Out_Parameter (Id : E) return B;
6091 function Is_Optional_Parameter (Id : E) return B;
6092 function Is_Package_Body_Entity (Id : E) return B;
6093 function Is_Packed (Id : E) return B;
6094 function Is_Packed_Array_Type (Id : E) return B;
6095 function Is_Potentially_Use_Visible (Id : E) return B;
6096 function Is_Preelaborated (Id : E) return B;
6097 function Is_Primitive (Id : E) return B;
6098 function Is_Primitive_Wrapper (Id : E) return B;
6099 function Is_Private_Composite (Id : E) return B;
6100 function Is_Private_Descendant (Id : E) return B;
6101 function Is_Private_Primitive (Id : E) return B;
6102 function Is_Public (Id : E) return B;
6103 function Is_Pure (Id : E) return B;
6104 function Is_Pure_Unit_Access_Type (Id : E) return B;
6105 function Is_RACW_Stub_Type (Id : E) return B;
6106 function Is_Raised (Id : E) return B;
6107 function Is_Remote_Call_Interface (Id : E) return B;
6108 function Is_Remote_Types (Id : E) return B;
6109 function Is_Renaming_Of_Object (Id : E) return B;
6110 function Is_Return_Object (Id : E) return B;
6111 function Is_Shared_Passive (Id : E) return B;
6112 function Is_Statically_Allocated (Id : E) return B;
6113 function Is_Tag (Id : E) return B;
6114 function Is_Tagged_Type (Id : E) return B;
6115 function Is_Thunk (Id : E) return B;
6116 function Is_Trivial_Subprogram (Id : E) return B;
6117 function Is_True_Constant (Id : E) return B;
6118 function Is_Unchecked_Union (Id : E) return B;
6119 function Is_Underlying_Record_View (Id : E) return B;
6120 function Is_Unsigned_Type (Id : E) return B;
6121 function Is_VMS_Exception (Id : E) return B;
6122 function Is_Valued_Procedure (Id : E) return B;
6123 function Is_Visible_Child_Unit (Id : E) return B;
6124 function Is_Visible_Formal (Id : E) return B;
6125 function Is_Volatile (Id : E) return B;
6126 function Itype_Printed (Id : E) return B;
6127 function Kill_Elaboration_Checks (Id : E) return B;
6128 function Kill_Range_Checks (Id : E) return B;
6129 function Kill_Tag_Checks (Id : E) return B;
6130 function Known_To_Have_Preelab_Init (Id : E) return B;
6131 function Last_Assignment (Id : E) return N;
6132 function Last_Entity (Id : E) return E;
6133 function Limited_View (Id : E) return E;
6134 function Lit_Indexes (Id : E) return E;
6135 function Lit_Strings (Id : E) return E;
6136 function Low_Bound_Tested (Id : E) return B;
6137 function Machine_Radix_10 (Id : E) return B;
6138 function Master_Id (Id : E) return E;
6139 function Materialize_Entity (Id : E) return B;
6140 function Mechanism (Id : E) return M;
6141 function Modulus (Id : E) return U;
6142 function Must_Be_On_Byte_Boundary (Id : E) return B;
6143 function Must_Have_Preelab_Init (Id : E) return B;
6144 function Needs_Debug_Info (Id : E) return B;
6145 function Needs_No_Actuals (Id : E) return B;
6146 function Never_Set_In_Source (Id : E) return B;
6147 function Next_Inlined_Subprogram (Id : E) return E;
6148 function No_Pool_Assigned (Id : E) return B;
6149 function No_Return (Id : E) return B;
6150 function No_Strict_Aliasing (Id : E) return B;
6151 function Non_Binary_Modulus (Id : E) return B;
6152 function Non_Limited_View (Id : E) return E;
6153 function Nonzero_Is_True (Id : E) return B;
6154 function Normalized_First_Bit (Id : E) return U;
6155 function Normalized_Position (Id : E) return U;
6156 function Normalized_Position_Max (Id : E) return U;
6157 function OK_To_Reference (Id : E) return B;
6158 function OK_To_Rename (Id : E) return B;
6159 function OK_To_Reorder_Components (Id : E) return B;
6160 function Optimize_Alignment_Space (Id : E) return B;
6161 function Optimize_Alignment_Time (Id : E) return B;
6162 function Original_Array_Type (Id : E) return E;
6163 function Original_Record_Component (Id : E) return E;
6164 function Overlays_Constant (Id : E) return B;
6165 function Overridden_Operation (Id : E) return E;
6166 function Package_Instantiation (Id : E) return N;
6167 function Packed_Array_Type (Id : E) return E;
6168 function Parent_Subtype (Id : E) return E;
6169 function Postcondition_Proc (Id : E) return E;
6170 function PPC_Wrapper (Id : E) return E;
6171 function Direct_Primitive_Operations (Id : E) return L;
6172 function Prival (Id : E) return E;
6173 function Prival_Link (Id : E) return E;
6174 function Private_Dependents (Id : E) return L;
6175 function Private_View (Id : E) return N;
6176 function Protected_Body_Subprogram (Id : E) return E;
6177 function Protected_Formal (Id : E) return E;
6178 function Protection_Object (Id : E) return E;
6179 function RM_Size (Id : E) return U;
6180 function Reachable (Id : E) return B;
6181 function Referenced (Id : E) return B;
6182 function Referenced_As_LHS (Id : E) return B;
6183 function Referenced_As_Out_Parameter (Id : E) return B;
6184 function Register_Exception_Call (Id : E) return N;
6185 function Related_Array_Object (Id : E) return E;
6186 function Related_Expression (Id : E) return N;
6187 function Related_Instance (Id : E) return E;
6188 function Related_Type (Id : E) return E;
6189 function Relative_Deadline_Variable (Id : E) return E;
6190 function Renamed_Entity (Id : E) return N;
6191 function Renamed_In_Spec (Id : E) return B;
6192 function Renamed_Object (Id : E) return N;
6193 function Renaming_Map (Id : E) return U;
6194 function Requires_Overriding (Id : E) return B;
6195 function Return_Present (Id : E) return B;
6196 function Return_Applies_To (Id : E) return N;
6197 function Returns_By_Ref (Id : E) return B;
6198 function Reverse_Bit_Order (Id : E) return B;
6199 function Scalar_Range (Id : E) return N;
6200 function Scale_Value (Id : E) return U;
6201 function Scope_Depth_Value (Id : E) return U;
6202 function Sec_Stack_Needed_For_Return (Id : E) return B;
6203 function Shadow_Entities (Id : E) return S;
6204 function Shared_Var_Procs_Instance (Id : E) return E;
6205 function Size_Check_Code (Id : E) return N;
6206 function Size_Known_At_Compile_Time (Id : E) return B;
6207 function Size_Depends_On_Discriminant (Id : E) return B;
6208 function Small_Value (Id : E) return R;
6209 function Spec_Entity (Id : E) return E;
6210 function Spec_PPC_List (Id : E) return N;
6211 function Storage_Size_Variable (Id : E) return E;
6212 function Static_Elaboration_Desired (Id : E) return B;
6213 function Static_Initialization (Id : E) return N;
6214 function Stored_Constraint (Id : E) return L;
6215 function Strict_Alignment (Id : E) return B;
6216 function String_Literal_Length (Id : E) return U;
6217 function String_Literal_Low_Bound (Id : E) return N;
6218 function Subprograms_For_Type (Id : E) return E;
6219 function Suppress_Elaboration_Warnings (Id : E) return B;
6220 function Suppress_Init_Proc (Id : E) return B;
6221 function Suppress_Style_Checks (Id : E) return B;
6222 function Suppress_Value_Tracking_On_Call (Id : E) return B;
6223 function Task_Body_Procedure (Id : E) return N;
6224 function Treat_As_Volatile (Id : E) return B;
6225 function Underlying_Full_View (Id : E) return E;
6226 function Underlying_Record_View (Id : E) return E;
6227 function Universal_Aliasing (Id : E) return B;
6228 function Unset_Reference (Id : E) return N;
6229 function Used_As_Generic_Actual (Id : E) return B;
6230 function Uses_Sec_Stack (Id : E) return B;
6231 function Vax_Float (Id : E) return B;
6232 function Warnings_Off (Id : E) return B;
6233 function Warnings_Off_Used (Id : E) return B;
6234 function Warnings_Off_Used_Unmodified (Id : E) return B;
6235 function Warnings_Off_Used_Unreferenced (Id : E) return B;
6236 function Was_Hidden (Id : E) return B;
6237 function Wrapped_Entity (Id : E) return E;
6239 -------------------------------
6240 -- Classification Attributes --
6241 -------------------------------
6243 -- These functions provide a convenient functional notation for testing
6244 -- whether an Ekind value belongs to a specified kind, for example the
6245 -- function Is_Elementary_Type tests if its argument is in Elementary_Kind.
6246 -- In some cases, the test is of an entity attribute (e.g. in the case of
6247 -- Is_Generic_Type where the Ekind does not provide the needed information)
6249 function Is_Access_Type (Id : E) return B;
6250 function Is_Access_Protected_Subprogram_Type (Id : E) return B;
6251 function Is_Access_Subprogram_Type (Id : E) return B;
6252 function Is_Aggregate_Type (Id : E) return B;
6253 function Is_Array_Type (Id : E) return B;
6254 function Is_Assignable (Id : E) return B;
6255 function Is_Class_Wide_Type (Id : E) return B;
6256 function Is_Composite_Type (Id : E) return B;
6257 function Is_Concurrent_Body (Id : E) return B;
6258 function Is_Concurrent_Record_Type (Id : E) return B;
6259 function Is_Concurrent_Type (Id : E) return B;
6260 function Is_Decimal_Fixed_Point_Type (Id : E) return B;
6261 function Is_Digits_Type (Id : E) return B;
6262 function Is_Descendent_Of_Address (Id : E) return B;
6263 function Is_Discrete_Or_Fixed_Point_Type (Id : E) return B;
6264 function Is_Discrete_Type (Id : E) return B;
6265 function Is_Elementary_Type (Id : E) return B;
6266 function Is_Entry (Id : E) return B;
6267 function Is_Enumeration_Type (Id : E) return B;
6268 function Is_Fixed_Point_Type (Id : E) return B;
6269 function Is_Floating_Point_Type (Id : E) return B;
6270 function Is_Formal (Id : E) return B;
6271 function Is_Formal_Object (Id : E) return B;
6272 function Is_Formal_Subprogram (Id : E) return B;
6273 function Is_Generic_Actual_Type (Id : E) return B;
6274 function Is_Generic_Unit (Id : E) return B;
6275 function Is_Generic_Type (Id : E) return B;
6276 function Is_Generic_Subprogram (Id : E) return B;
6277 function Is_Incomplete_Or_Private_Type (Id : E) return B;
6278 function Is_Incomplete_Type (Id : E) return B;
6279 function Is_Integer_Type (Id : E) return B;
6280 function Is_Limited_Record (Id : E) return B;
6281 function Is_Modular_Integer_Type (Id : E) return B;
6282 function Is_Named_Number (Id : E) return B;
6283 function Is_Numeric_Type (Id : E) return B;
6284 function Is_Object (Id : E) return B;
6285 function Is_Ordinary_Fixed_Point_Type (Id : E) return B;
6286 function Is_Overloadable (Id : E) return B;
6287 function Is_Overriding_Operation (Id : E) return B;
6288 function Is_Private_Type (Id : E) return B;
6289 function Is_Protected_Type (Id : E) return B;
6290 function Is_Real_Type (Id : E) return B;
6291 function Is_Record_Type (Id : E) return B;
6292 function Is_Scalar_Type (Id : E) return B;
6293 function Is_Signed_Integer_Type (Id : E) return B;
6294 function Is_Subprogram (Id : E) return B;
6295 function Is_Task_Type (Id : E) return B;
6296 function Is_Type (Id : E) return B;
6298 -------------------------------------
6299 -- Synthesized Attribute Functions --
6300 -------------------------------------
6302 -- The functions in this section synthesize attributes from the tree,
6303 -- so they do not correspond to defined fields in the entity itself.
6305 function Address_Clause (Id : E) return N;
6306 function Aft_Value (Id : E) return U;
6307 function Alignment_Clause (Id : E) return N;
6308 function Base_Type (Id : E) return E;
6309 function Declaration_Node (Id : E) return N;
6310 function Designated_Type (Id : E) return E;
6311 function First_Component (Id : E) return E;
6312 function First_Component_Or_Discriminant (Id : E) return E;
6313 function First_Formal (Id : E) return E;
6314 function First_Formal_With_Extras (Id : E) return E;
6315 function Has_Attach_Handler (Id : E) return B;
6316 function Has_Entries (Id : E) return B;
6317 function Has_Foreign_Convention (Id : E) return B;
6318 function Has_Private_Ancestor (Id : E) return B;
6319 function Has_Private_Declaration (Id : E) return B;
6320 function Implementation_Base_Type (Id : E) return E;
6321 function Is_Boolean_Type (Id : E) return B;
6322 function Is_Constant_Object (Id : E) return B;
6323 function Is_Discriminal (Id : E) return B;
6324 function Is_Dynamic_Scope (Id : E) return B;
6325 function Is_Package_Or_Generic_Package (Id : E) return B;
6326 function Is_Prival (Id : E) return B;
6327 function Is_Protected_Component (Id : E) return B;
6328 function Is_Protected_Interface (Id : E) return B;
6329 function Is_Protected_Record_Type (Id : E) return B;
6330 function Is_Standard_Character_Type (Id : E) return B;
6331 function Is_String_Type (Id : E) return B;
6332 function Is_Synchronized_Interface (Id : E) return B;
6333 function Is_Task_Interface (Id : E) return B;
6334 function Is_Task_Record_Type (Id : E) return B;
6335 function Is_Wrapper_Package (Id : E) return B;
6336 function Last_Formal (Id : E) return E;
6337 function Next_Component (Id : E) return E;
6338 function Next_Component_Or_Discriminant (Id : E) return E;
6339 function Next_Discriminant (Id : E) return E;
6340 function Next_Formal (Id : E) return E;
6341 function Next_Formal_With_Extras (Id : E) return E;
6342 function Next_Literal (Id : E) return E;
6343 function Next_Stored_Discriminant (Id : E) return E;
6344 function Number_Dimensions (Id : E) return Pos;
6345 function Number_Entries (Id : E) return Nat;
6346 function Number_Formals (Id : E) return Pos;
6347 function Parameter_Mode (Id : E) return Formal_Kind;
6348 function Primitive_Operations (Id : E) return L;
6349 function Root_Type (Id : E) return E;
6350 function Scope_Depth_Set (Id : E) return B;
6351 function Size_Clause (Id : E) return N;
6352 function Stream_Size_Clause (Id : E) return N;
6353 function Type_High_Bound (Id : E) return N;
6354 function Type_Low_Bound (Id : E) return N;
6355 function Underlying_Type (Id : E) return E;
6357 ----------------------------------------------
6358 -- Type Representation Attribute Predicates --
6359 ----------------------------------------------
6361 -- These predicates test the setting of the indicated attribute. If the
6362 -- value has been set, then Known is True, and Unknown is False. If no
6363 -- value is set, then Known is False and Unknown is True. The Known_Static
6364 -- predicate is true only if the value is set (Known) and is set to a
6365 -- compile time known value. Note that in the case of Alignment and
6366 -- Normalized_First_Bit, dynamic values are not possible, so we do not
6367 -- need a separate Known_Static calls in these cases. The not set (unknown)
6368 -- values are as follows:
6370 -- Alignment Uint_0 or No_Uint
6371 -- Component_Size Uint_0 or No_Uint
6372 -- Component_Bit_Offset No_Uint
6373 -- Digits_Value Uint_0 or No_Uint
6374 -- Esize Uint_0 or No_Uint
6375 -- Normalized_First_Bit No_Uint
6376 -- Normalized_Position No_Uint
6377 -- Normalized_Position_Max No_Uint
6378 -- RM_Size Uint_0 or No_Uint
6380 -- It would be cleaner to use No_Uint in all these cases, but historically
6381 -- we chose to use Uint_0 at first, and the change over will take time ???
6382 -- This is particularly true for the RM_Size field, where a value of zero
6383 -- is legitimate. We deal with this by a nasty kludge that knows that the
6384 -- value is always known static for discrete types (and no other types can
6385 -- have an RM_Size value of zero).
6387 -- In two cases, Known_Static_Esize and Known_Static_RM_Size, there is one
6388 -- more consideration, which is that we always return False for generic
6389 -- types. Within a template, the size can look known, because of the fake
6390 -- size values we put in template types, but they are not really known and
6391 -- anyone testing if they are known within the template should get False as
6392 -- a result to prevent incorrect assumptions.
6394 function Known_Alignment (E : Entity_Id) return B;
6395 function Known_Component_Bit_Offset (E : Entity_Id) return B;
6396 function Known_Component_Size (E : Entity_Id) return B;
6397 function Known_Esize (E : Entity_Id) return B;
6398 function Known_Normalized_First_Bit (E : Entity_Id) return B;
6399 function Known_Normalized_Position (E : Entity_Id) return B;
6400 function Known_Normalized_Position_Max (E : Entity_Id) return B;
6401 function Known_RM_Size (E : Entity_Id) return B;
6403 function Known_Static_Component_Bit_Offset (E : Entity_Id) return B;
6404 function Known_Static_Component_Size (E : Entity_Id) return B;
6405 function Known_Static_Esize (E : Entity_Id) return B;
6406 function Known_Static_Normalized_First_Bit (E : Entity_Id) return B;
6407 function Known_Static_Normalized_Position (E : Entity_Id) return B;
6408 function Known_Static_Normalized_Position_Max (E : Entity_Id) return B;
6409 function Known_Static_RM_Size (E : Entity_Id) return B;
6411 function Unknown_Alignment (E : Entity_Id) return B;
6412 function Unknown_Component_Bit_Offset (E : Entity_Id) return B;
6413 function Unknown_Component_Size (E : Entity_Id) return B;
6414 function Unknown_Esize (E : Entity_Id) return B;
6415 function Unknown_Normalized_First_Bit (E : Entity_Id) return B;
6416 function Unknown_Normalized_Position (E : Entity_Id) return B;
6417 function Unknown_Normalized_Position_Max (E : Entity_Id) return B;
6418 function Unknown_RM_Size (E : Entity_Id) return B;
6420 ------------------------------
6421 -- Attribute Set Procedures --
6422 ------------------------------
6424 procedure Set_Accept_Address (Id : E; V : L);
6425 procedure Set_Access_Disp_Table (Id : E; V : L);
6426 procedure Set_Dispatch_Table_Wrappers (Id : E; V : L);
6427 procedure Set_Actual_Subtype (Id : E; V : E);
6428 procedure Set_Address_Taken (Id : E; V : B := True);
6429 procedure Set_Alias (Id : E; V : E);
6430 procedure Set_Alignment (Id : E; V : U);
6431 procedure Set_Associated_Final_Chain (Id : E; V : E);
6432 procedure Set_Associated_Formal_Package (Id : E; V : E);
6433 procedure Set_Associated_Node_For_Itype (Id : E; V : N);
6434 procedure Set_Associated_Storage_Pool (Id : E; V : E);
6435 procedure Set_Barrier_Function (Id : E; V : N);
6436 procedure Set_Block_Node (Id : E; V : N);
6437 procedure Set_Body_Entity (Id : E; V : E);
6438 procedure Set_Body_Needed_For_SAL (Id : E; V : B := True);
6439 procedure Set_CR_Discriminant (Id : E; V : E);
6440 procedure Set_C_Pass_By_Copy (Id : E; V : B := True);
6441 procedure Set_Can_Never_Be_Null (Id : E; V : B := True);
6442 procedure Set_Checks_May_Be_Suppressed (Id : E; V : B := True);
6443 procedure Set_Class_Wide_Type (Id : E; V : E);
6444 procedure Set_Cloned_Subtype (Id : E; V : E);
6445 procedure Set_Component_Alignment (Id : E; V : C);
6446 procedure Set_Component_Bit_Offset (Id : E; V : U);
6447 procedure Set_Component_Clause (Id : E; V : N);
6448 procedure Set_Component_Size (Id : E; V : U);
6449 procedure Set_Component_Type (Id : E; V : E);
6450 procedure Set_Corresponding_Concurrent_Type (Id : E; V : E);
6451 procedure Set_Corresponding_Discriminant (Id : E; V : E);
6452 procedure Set_Corresponding_Equality (Id : E; V : E);
6453 procedure Set_Corresponding_Protected_Entry (Id : E; V : E);
6454 procedure Set_Corresponding_Record_Type (Id : E; V : E);
6455 procedure Set_Corresponding_Remote_Type (Id : E; V : E);
6456 procedure Set_Current_Use_Clause (Id : E; V : E);
6457 procedure Set_Current_Value (Id : E; V : N);
6458 procedure Set_Debug_Info_Off (Id : E; V : B := True);
6459 procedure Set_Debug_Renaming_Link (Id : E; V : E);
6460 procedure Set_DTC_Entity (Id : E; V : E);
6461 procedure Set_DT_Entry_Count (Id : E; V : U);
6462 procedure Set_DT_Offset_To_Top_Func (Id : E; V : E);
6463 procedure Set_DT_Position (Id : E; V : U);
6464 procedure Set_Default_Expr_Function (Id : E; V : E);
6465 procedure Set_Default_Expressions_Processed (Id : E; V : B := True);
6466 procedure Set_Default_Value (Id : E; V : N);
6467 procedure Set_Delay_Cleanups (Id : E; V : B := True);
6468 procedure Set_Delay_Subprogram_Descriptors (Id : E; V : B := True);
6469 procedure Set_Delta_Value (Id : E; V : R);
6470 procedure Set_Dependent_Instances (Id : E; V : L);
6471 procedure Set_Depends_On_Private (Id : E; V : B := True);
6472 procedure Set_Digits_Value (Id : E; V : U);
6473 procedure Set_Directly_Designated_Type (Id : E; V : E);
6474 procedure Set_Discard_Names (Id : E; V : B := True);
6475 procedure Set_Discriminal (Id : E; V : E);
6476 procedure Set_Discriminal_Link (Id : E; V : E);
6477 procedure Set_Discriminant_Checking_Func (Id : E; V : E);
6478 procedure Set_Discriminant_Constraint (Id : E; V : L);
6479 procedure Set_Discriminant_Default_Value (Id : E; V : N);
6480 procedure Set_Discriminant_Number (Id : E; V : U);
6481 procedure Set_Elaborate_Body_Desirable (Id : E; V : B := True);
6482 procedure Set_Elaboration_Entity (Id : E; V : E);
6483 procedure Set_Elaboration_Entity_Required (Id : E; V : B := True);
6484 procedure Set_Enclosing_Scope (Id : E; V : E);
6485 procedure Set_Entry_Accepted (Id : E; V : B := True);
6486 procedure Set_Entry_Bodies_Array (Id : E; V : E);
6487 procedure Set_Entry_Cancel_Parameter (Id : E; V : E);
6488 procedure Set_Entry_Component (Id : E; V : E);
6489 procedure Set_Entry_Formal (Id : E; V : E);
6490 procedure Set_Entry_Index_Constant (Id : E; V : E);
6491 procedure Set_Entry_Parameters_Type (Id : E; V : E);
6492 procedure Set_Enum_Pos_To_Rep (Id : E; V : E);
6493 procedure Set_Enumeration_Pos (Id : E; V : U);
6494 procedure Set_Enumeration_Rep (Id : E; V : U);
6495 procedure Set_Enumeration_Rep_Expr (Id : E; V : N);
6496 procedure Set_Equivalent_Type (Id : E; V : E);
6497 procedure Set_Esize (Id : E; V : U);
6498 procedure Set_Exception_Code (Id : E; V : U);
6499 procedure Set_Extra_Accessibility (Id : E; V : E);
6500 procedure Set_Extra_Constrained (Id : E; V : E);
6501 procedure Set_Extra_Formal (Id : E; V : E);
6502 procedure Set_Extra_Formals (Id : E; V : E);
6503 procedure Set_Can_Use_Internal_Rep (Id : E; V : B := True);
6504 procedure Set_Finalization_Chain_Entity (Id : E; V : E);
6505 procedure Set_Finalize_Storage_Only (Id : E; V : B := True);
6506 procedure Set_First_Entity (Id : E; V : E);
6507 procedure Set_First_Exit_Statement (Id : E; V : N);
6508 procedure Set_First_Index (Id : E; V : N);
6509 procedure Set_First_Literal (Id : E; V : E);
6510 procedure Set_First_Optional_Parameter (Id : E; V : E);
6511 procedure Set_First_Private_Entity (Id : E; V : E);
6512 procedure Set_First_Rep_Item (Id : E; V : N);
6513 procedure Set_Freeze_Node (Id : E; V : N);
6514 procedure Set_From_With_Type (Id : E; V : B := True);
6515 procedure Set_Full_View (Id : E; V : E);
6516 procedure Set_Generic_Homonym (Id : E; V : E);
6517 procedure Set_Generic_Renamings (Id : E; V : L);
6518 procedure Set_Handler_Records (Id : E; V : S);
6519 procedure Set_Has_Aliased_Components (Id : E; V : B := True);
6520 procedure Set_Has_Alignment_Clause (Id : E; V : B := True);
6521 procedure Set_Has_All_Calls_Remote (Id : E; V : B := True);
6522 procedure Set_Has_Anon_Block_Suffix (Id : E; V : B := True);
6523 procedure Set_Has_Atomic_Components (Id : E; V : B := True);
6524 procedure Set_Has_Biased_Representation (Id : E; V : B := True);
6525 procedure Set_Has_Completion (Id : E; V : B := True);
6526 procedure Set_Has_Completion_In_Body (Id : E; V : B := True);
6527 procedure Set_Has_Complex_Representation (Id : E; V : B := True);
6528 procedure Set_Has_Component_Size_Clause (Id : E; V : B := True);
6529 procedure Set_Has_Constrained_Partial_View (Id : E; V : B := True);
6530 procedure Set_Has_Contiguous_Rep (Id : E; V : B := True);
6531 procedure Set_Has_Controlled_Component (Id : E; V : B := True);
6532 procedure Set_Has_Controlling_Result (Id : E; V : B := True);
6533 procedure Set_Has_Convention_Pragma (Id : E; V : B := True);
6534 procedure Set_Has_Delayed_Aspects (Id : E; V : B := True);
6535 procedure Set_Has_Delayed_Freeze (Id : E; V : B := True);
6536 procedure Set_Has_Discriminants (Id : E; V : B := True);
6537 procedure Set_Has_Dispatch_Table (Id : E; V : B := True);
6538 procedure Set_Has_Enumeration_Rep_Clause (Id : E; V : B := True);
6539 procedure Set_Has_Exit (Id : E; V : B := True);
6540 procedure Set_Has_External_Tag_Rep_Clause (Id : E; V : B := True);
6541 procedure Set_Has_Fully_Qualified_Name (Id : E; V : B := True);
6542 procedure Set_Has_Gigi_Rep_Item (Id : E; V : B := True);
6543 procedure Set_Has_Homonym (Id : E; V : B := True);
6544 procedure Set_Has_Inheritable_Invariants (Id : E; V : B := True);
6545 procedure Set_Has_Initial_Value (Id : E; V : B := True);
6546 procedure Set_Has_Invariants (Id : E; V : B := True);
6547 procedure Set_Has_Machine_Radix_Clause (Id : E; V : B := True);
6548 procedure Set_Has_Master_Entity (Id : E; V : B := True);
6549 procedure Set_Has_Missing_Return (Id : E; V : B := True);
6550 procedure Set_Has_Nested_Block_With_Handler (Id : E; V : B := True);
6551 procedure Set_Has_Forward_Instantiation (Id : E; V : B := True);
6552 procedure Set_Has_Up_Level_Access (Id : E; V : B := True);
6553 procedure Set_Has_Non_Standard_Rep (Id : E; V : B := True);
6554 procedure Set_Has_Object_Size_Clause (Id : E; V : B := True);
6555 procedure Set_Has_Per_Object_Constraint (Id : E; V : B := True);
6556 procedure Set_Has_Persistent_BSS (Id : E; V : B := True);
6557 procedure Set_Has_Postconditions (Id : E; V : B := True);
6558 procedure Set_Has_Pragma_Controlled (Id : E; V : B := True);
6559 procedure Set_Has_Pragma_Elaborate_Body (Id : E; V : B := True);
6560 procedure Set_Has_Pragma_Inline (Id : E; V : B := True);
6561 procedure Set_Has_Pragma_Inline_Always (Id : E; V : B := True);
6562 procedure Set_Has_Pragma_Ordered (Id : E; V : B := True);
6563 procedure Set_Has_Pragma_Pack (Id : E; V : B := True);
6564 procedure Set_Has_Pragma_Preelab_Init (Id : E; V : B := True);
6565 procedure Set_Has_Pragma_Pure (Id : E; V : B := True);
6566 procedure Set_Has_Pragma_Pure_Function (Id : E; V : B := True);
6567 procedure Set_Has_Pragma_Thread_Local_Storage (Id : E; V : B := True);
6568 procedure Set_Has_Pragma_Unmodified (Id : E; V : B := True);
6569 procedure Set_Has_Pragma_Unreferenced (Id : E; V : B := True);
6570 procedure Set_Has_Pragma_Unreferenced_Objects (Id : E; V : B := True);
6571 procedure Set_Has_Predicates (Id : E; V : B := True);
6572 procedure Set_Has_Primitive_Operations (Id : E; V : B := True);
6573 procedure Set_Has_Private_Declaration (Id : E; V : B := True);
6574 procedure Set_Has_Qualified_Name (Id : E; V : B := True);
6575 procedure Set_Has_RACW (Id : E; V : B := True);
6576 procedure Set_Has_Record_Rep_Clause (Id : E; V : B := True);
6577 procedure Set_Has_Recursive_Call (Id : E; V : B := True);
6578 procedure Set_Has_Size_Clause (Id : E; V : B := True);
6579 procedure Set_Has_Small_Clause (Id : E; V : B := True);
6580 procedure Set_Has_Specified_Layout (Id : E; V : B := True);
6581 procedure Set_Has_Specified_Stream_Input (Id : E; V : B := True);
6582 procedure Set_Has_Specified_Stream_Output (Id : E; V : B := True);
6583 procedure Set_Has_Specified_Stream_Read (Id : E; V : B := True);
6584 procedure Set_Has_Specified_Stream_Write (Id : E; V : B := True);
6585 procedure Set_Has_Static_Discriminants (Id : E; V : B := True);
6586 procedure Set_Has_Storage_Size_Clause (Id : E; V : B := True);
6587 procedure Set_Has_Stream_Size_Clause (Id : E; V : B := True);
6588 procedure Set_Has_Subprogram_Descriptor (Id : E; V : B := True);
6589 procedure Set_Has_Task (Id : E; V : B := True);
6590 procedure Set_Has_Thunks (Id : E; V : B := True);
6591 procedure Set_Has_Unchecked_Union (Id : E; V : B := True);
6592 procedure Set_Has_Unknown_Discriminants (Id : E; V : B := True);
6593 procedure Set_Has_Volatile_Components (Id : E; V : B := True);
6594 procedure Set_Has_Xref_Entry (Id : E; V : B := True);
6595 procedure Set_Hiding_Loop_Variable (Id : E; V : E);
6596 procedure Set_Homonym (Id : E; V : E);
6597 procedure Set_Interfaces (Id : E; V : L);
6598 procedure Set_In_Package_Body (Id : E; V : B := True);
6599 procedure Set_In_Private_Part (Id : E; V : B := True);
6600 procedure Set_In_Use (Id : E; V : B := True);
6601 procedure Set_Inner_Instances (Id : E; V : L);
6602 procedure Set_Interface_Alias (Id : E; V : E);
6603 procedure Set_Interface_Name (Id : E; V : N);
6604 procedure Set_Is_AST_Entry (Id : E; V : B := True);
6605 procedure Set_Is_Abstract_Subprogram (Id : E; V : B := True);
6606 procedure Set_Is_Abstract_Type (Id : E; V : B := True);
6607 procedure Set_Is_Access_Constant (Id : E; V : B := True);
6608 procedure Set_Is_Ada_2005_Only (Id : E; V : B := True);
6609 procedure Set_Is_Ada_2012_Only (Id : E; V : B := True);
6610 procedure Set_Is_Aliased (Id : E; V : B := True);
6611 procedure Set_Is_Asynchronous (Id : E; V : B := True);
6612 procedure Set_Is_Atomic (Id : E; V : B := True);
6613 procedure Set_Is_Bit_Packed_Array (Id : E; V : B := True);
6614 procedure Set_Is_CPP_Class (Id : E; V : B := True);
6615 procedure Set_Is_Called (Id : E; V : B := True);
6616 procedure Set_Is_Character_Type (Id : E; V : B := True);
6617 procedure Set_Is_Child_Unit (Id : E; V : B := True);
6618 procedure Set_Is_Class_Wide_Equivalent_Type (Id : E; V : B := True);
6619 procedure Set_Is_Compilation_Unit (Id : E; V : B := True);
6620 procedure Set_Is_Completely_Hidden (Id : E; V : B := True);
6621 procedure Set_Is_Concurrent_Record_Type (Id : E; V : B := True);
6622 procedure Set_Is_Constr_Subt_For_UN_Aliased (Id : E; V : B := True);
6623 procedure Set_Is_Constr_Subt_For_U_Nominal (Id : E; V : B := True);
6624 procedure Set_Is_Constrained (Id : E; V : B := True);
6625 procedure Set_Is_Constructor (Id : E; V : B := True);
6626 procedure Set_Is_Controlled (Id : E; V : B := True);
6627 procedure Set_Is_Controlling_Formal (Id : E; V : B := True);
6628 procedure Set_Is_Descendent_Of_Address (Id : E; V : B := True);
6629 procedure Set_Is_Discrim_SO_Function (Id : E; V : B := True);
6630 procedure Set_Is_Dispatch_Table_Entity (Id : E; V : B := True);
6631 procedure Set_Is_Dispatching_Operation (Id : E; V : B := True);
6632 procedure Set_Is_Eliminated (Id : E; V : B := True);
6633 procedure Set_Is_Entry_Formal (Id : E; V : B := True);
6634 procedure Set_Is_Exported (Id : E; V : B := True);
6635 procedure Set_Is_First_Subtype (Id : E; V : B := True);
6636 procedure Set_Is_For_Access_Subtype (Id : E; V : B := True);
6637 procedure Set_Is_Formal_Subprogram (Id : E; V : B := True);
6638 procedure Set_Is_Frozen (Id : E; V : B := True);
6639 procedure Set_Is_Generic_Actual_Type (Id : E; V : B := True);
6640 procedure Set_Is_Generic_Instance (Id : E; V : B := True);
6641 procedure Set_Is_Generic_Type (Id : E; V : B := True);
6642 procedure Set_Is_Hidden (Id : E; V : B := True);
6643 procedure Set_Is_Hidden_Open_Scope (Id : E; V : B := True);
6644 procedure Set_Is_Immediately_Visible (Id : E; V : B := True);
6645 procedure Set_Is_Imported (Id : E; V : B := True);
6646 procedure Set_Is_Inlined (Id : E; V : B := True);
6647 procedure Set_Is_Interface (Id : E; V : B := True);
6648 procedure Set_Is_Instantiated (Id : E; V : B := True);
6649 procedure Set_Is_Internal (Id : E; V : B := True);
6650 procedure Set_Is_Interrupt_Handler (Id : E; V : B := True);
6651 procedure Set_Is_Intrinsic_Subprogram (Id : E; V : B := True);
6652 procedure Set_Is_Itype (Id : E; V : B := True);
6653 procedure Set_Is_Known_Non_Null (Id : E; V : B := True);
6654 procedure Set_Is_Known_Null (Id : E; V : B := True);
6655 procedure Set_Is_Known_Valid (Id : E; V : B := True);
6656 procedure Set_Is_Limited_Composite (Id : E; V : B := True);
6657 procedure Set_Is_Limited_Interface (Id : E; V : B := True);
6658 procedure Set_Is_Limited_Record (Id : E; V : B := True);
6659 procedure Set_Is_Local_Anonymous_Access (Id : E; V : B := True);
6660 procedure Set_Is_Machine_Code_Subprogram (Id : E; V : B := True);
6661 procedure Set_Is_Non_Static_Subtype (Id : E; V : B := True);
6662 procedure Set_Is_Null_Init_Proc (Id : E; V : B := True);
6663 procedure Set_Is_Obsolescent (Id : E; V : B := True);
6664 procedure Set_Is_Only_Out_Parameter (Id : E; V : B := True);
6665 procedure Set_Is_Optional_Parameter (Id : E; V : B := True);
6666 procedure Set_Is_Overriding_Operation (Id : E; V : B := True);
6667 procedure Set_Is_Package_Body_Entity (Id : E; V : B := True);
6668 procedure Set_Is_Packed (Id : E; V : B := True);
6669 procedure Set_Is_Packed_Array_Type (Id : E; V : B := True);
6670 procedure Set_Is_Potentially_Use_Visible (Id : E; V : B := True);
6671 procedure Set_Is_Preelaborated (Id : E; V : B := True);
6672 procedure Set_Is_Primitive (Id : E; V : B := True);
6673 procedure Set_Is_Primitive_Wrapper (Id : E; V : B := True);
6674 procedure Set_Is_Private_Composite (Id : E; V : B := True);
6675 procedure Set_Is_Private_Descendant (Id : E; V : B := True);
6676 procedure Set_Is_Private_Primitive (Id : E; V : B := True);
6677 procedure Set_Is_Public (Id : E; V : B := True);
6678 procedure Set_Is_Pure (Id : E; V : B := True);
6679 procedure Set_Is_Pure_Unit_Access_Type (Id : E; V : B := True);
6680 procedure Set_Is_RACW_Stub_Type (Id : E; V : B := True);
6681 procedure Set_Is_Raised (Id : E; V : B := True);
6682 procedure Set_Is_Remote_Call_Interface (Id : E; V : B := True);
6683 procedure Set_Is_Remote_Types (Id : E; V : B := True);
6684 procedure Set_Is_Renaming_Of_Object (Id : E; V : B := True);
6685 procedure Set_Is_Return_Object (Id : E; V : B := True);
6686 procedure Set_Is_Shared_Passive (Id : E; V : B := True);
6687 procedure Set_Is_Statically_Allocated (Id : E; V : B := True);
6688 procedure Set_Is_Tag (Id : E; V : B := True);
6689 procedure Set_Is_Tagged_Type (Id : E; V : B := True);
6690 procedure Set_Is_Thunk (Id : E; V : B := True);
6691 procedure Set_Is_Trivial_Subprogram (Id : E; V : B := True);
6692 procedure Set_Is_True_Constant (Id : E; V : B := True);
6693 procedure Set_Is_Unchecked_Union (Id : E; V : B := True);
6694 procedure Set_Is_Underlying_Record_View (Id : E; V : B := True);
6695 procedure Set_Is_Unsigned_Type (Id : E; V : B := True);
6696 procedure Set_Is_VMS_Exception (Id : E; V : B := True);
6697 procedure Set_Is_Valued_Procedure (Id : E; V : B := True);
6698 procedure Set_Is_Visible_Child_Unit (Id : E; V : B := True);
6699 procedure Set_Is_Visible_Formal (Id : E; V : B := True);
6700 procedure Set_Is_Volatile (Id : E; V : B := True);
6701 procedure Set_Itype_Printed (Id : E; V : B := True);
6702 procedure Set_Kill_Elaboration_Checks (Id : E; V : B := True);
6703 procedure Set_Kill_Range_Checks (Id : E; V : B := True);
6704 procedure Set_Kill_Tag_Checks (Id : E; V : B := True);
6705 procedure Set_Known_To_Have_Preelab_Init (Id : E; V : B := True);
6706 procedure Set_Last_Assignment (Id : E; V : N);
6707 procedure Set_Last_Entity (Id : E; V : E);
6708 procedure Set_Limited_View (Id : E; V : E);
6709 procedure Set_Lit_Indexes (Id : E; V : E);
6710 procedure Set_Lit_Strings (Id : E; V : E);
6711 procedure Set_Low_Bound_Tested (Id : E; V : B := True);
6712 procedure Set_Machine_Radix_10 (Id : E; V : B := True);
6713 procedure Set_Master_Id (Id : E; V : E);
6714 procedure Set_Materialize_Entity (Id : E; V : B := True);
6715 procedure Set_Mechanism (Id : E; V : M);
6716 procedure Set_Modulus (Id : E; V : U);
6717 procedure Set_Must_Be_On_Byte_Boundary (Id : E; V : B := True);
6718 procedure Set_Must_Have_Preelab_Init (Id : E; V : B := True);
6719 procedure Set_Needs_Debug_Info (Id : E; V : B := True);
6720 procedure Set_Needs_No_Actuals (Id : E; V : B := True);
6721 procedure Set_Never_Set_In_Source (Id : E; V : B := True);
6722 procedure Set_Next_Inlined_Subprogram (Id : E; V : E);
6723 procedure Set_No_Pool_Assigned (Id : E; V : B := True);
6724 procedure Set_No_Return (Id : E; V : B := True);
6725 procedure Set_No_Strict_Aliasing (Id : E; V : B := True);
6726 procedure Set_Non_Binary_Modulus (Id : E; V : B := True);
6727 procedure Set_Non_Limited_View (Id : E; V : E);
6728 procedure Set_Nonzero_Is_True (Id : E; V : B := True);
6729 procedure Set_Normalized_First_Bit (Id : E; V : U);
6730 procedure Set_Normalized_Position (Id : E; V : U);
6731 procedure Set_Normalized_Position_Max (Id : E; V : U);
6732 procedure Set_OK_To_Reference (Id : E; V : B := True);
6733 procedure Set_OK_To_Rename (Id : E; V : B := True);
6734 procedure Set_OK_To_Reorder_Components (Id : E; V : B := True);
6735 procedure Set_Optimize_Alignment_Space (Id : E; V : B := True);
6736 procedure Set_Optimize_Alignment_Time (Id : E; V : B := True);
6737 procedure Set_Original_Array_Type (Id : E; V : E);
6738 procedure Set_Original_Record_Component (Id : E; V : E);
6739 procedure Set_Overlays_Constant (Id : E; V : B := True);
6740 procedure Set_Overridden_Operation (Id : E; V : E);
6741 procedure Set_Package_Instantiation (Id : E; V : N);
6742 procedure Set_Packed_Array_Type (Id : E; V : E);
6743 procedure Set_Parent_Subtype (Id : E; V : E);
6744 procedure Set_Postcondition_Proc (Id : E; V : E);
6745 procedure Set_PPC_Wrapper (Id : E; V : E);
6746 procedure Set_Direct_Primitive_Operations (Id : E; V : L);
6747 procedure Set_Prival (Id : E; V : E);
6748 procedure Set_Prival_Link (Id : E; V : E);
6749 procedure Set_Private_Dependents (Id : E; V : L);
6750 procedure Set_Private_View (Id : E; V : N);
6751 procedure Set_Protected_Body_Subprogram (Id : E; V : E);
6752 procedure Set_Protected_Formal (Id : E; V : E);
6753 procedure Set_Protection_Object (Id : E; V : E);
6754 procedure Set_RM_Size (Id : E; V : U);
6755 procedure Set_Reachable (Id : E; V : B := True);
6756 procedure Set_Referenced (Id : E; V : B := True);
6757 procedure Set_Referenced_As_LHS (Id : E; V : B := True);
6758 procedure Set_Referenced_As_Out_Parameter (Id : E; V : B := True);
6759 procedure Set_Register_Exception_Call (Id : E; V : N);
6760 procedure Set_Related_Array_Object (Id : E; V : E);
6761 procedure Set_Related_Expression (Id : E; V : N);
6762 procedure Set_Related_Instance (Id : E; V : E);
6763 procedure Set_Related_Type (Id : E; V : E);
6764 procedure Set_Relative_Deadline_Variable (Id : E; V : E);
6765 procedure Set_Renamed_Entity (Id : E; V : N);
6766 procedure Set_Renamed_In_Spec (Id : E; V : B := True);
6767 procedure Set_Renamed_Object (Id : E; V : N);
6768 procedure Set_Renaming_Map (Id : E; V : U);
6769 procedure Set_Requires_Overriding (Id : E; V : B := True);
6770 procedure Set_Return_Present (Id : E; V : B := True);
6771 procedure Set_Return_Applies_To (Id : E; V : N);
6772 procedure Set_Returns_By_Ref (Id : E; V : B := True);
6773 procedure Set_Reverse_Bit_Order (Id : E; V : B := True);
6774 procedure Set_Scalar_Range (Id : E; V : N);
6775 procedure Set_Scale_Value (Id : E; V : U);
6776 procedure Set_Scope_Depth_Value (Id : E; V : U);
6777 procedure Set_Sec_Stack_Needed_For_Return (Id : E; V : B := True);
6778 procedure Set_Shadow_Entities (Id : E; V : S);
6779 procedure Set_Shared_Var_Procs_Instance (Id : E; V : E);
6780 procedure Set_Size_Check_Code (Id : E; V : N);
6781 procedure Set_Size_Depends_On_Discriminant (Id : E; V : B := True);
6782 procedure Set_Size_Known_At_Compile_Time (Id : E; V : B := True);
6783 procedure Set_Small_Value (Id : E; V : R);
6784 procedure Set_Spec_Entity (Id : E; V : E);
6785 procedure Set_Spec_PPC_List (Id : E; V : N);
6786 procedure Set_Storage_Size_Variable (Id : E; V : E);
6787 procedure Set_Static_Elaboration_Desired (Id : E; V : B);
6788 procedure Set_Static_Initialization (Id : E; V : N);
6789 procedure Set_Stored_Constraint (Id : E; V : L);
6790 procedure Set_Strict_Alignment (Id : E; V : B := True);
6791 procedure Set_String_Literal_Length (Id : E; V : U);
6792 procedure Set_String_Literal_Low_Bound (Id : E; V : N);
6793 procedure Set_Subprograms_For_Type (Id : E; V : E);
6794 procedure Set_Suppress_Elaboration_Warnings (Id : E; V : B := True);
6795 procedure Set_Suppress_Init_Proc (Id : E; V : B := True);
6796 procedure Set_Suppress_Style_Checks (Id : E; V : B := True);
6797 procedure Set_Suppress_Value_Tracking_On_Call (Id : E; V : B := True);
6798 procedure Set_Task_Body_Procedure (Id : E; V : N);
6799 procedure Set_Treat_As_Volatile (Id : E; V : B := True);
6800 procedure Set_Underlying_Full_View (Id : E; V : E);
6801 procedure Set_Underlying_Record_View (Id : E; V : E);
6802 procedure Set_Universal_Aliasing (Id : E; V : B := True);
6803 procedure Set_Unset_Reference (Id : E; V : N);
6804 procedure Set_Used_As_Generic_Actual (Id : E; V : B := True);
6805 procedure Set_Uses_Sec_Stack (Id : E; V : B := True);
6806 procedure Set_Vax_Float (Id : E; V : B := True);
6807 procedure Set_Warnings_Off (Id : E; V : B := True);
6808 procedure Set_Warnings_Off_Used (Id : E; V : B := True);
6809 procedure Set_Warnings_Off_Used_Unmodified (Id : E; V : B := True);
6810 procedure Set_Warnings_Off_Used_Unreferenced (Id : E; V : B := True);
6811 procedure Set_Was_Hidden (Id : E; V : B := True);
6812 procedure Set_Wrapped_Entity (Id : E; V : E);
6814 ---------------------------------------------------
6815 -- Access to Subprograms in Subprograms_For_Type --
6816 ---------------------------------------------------
6818 function Invariant_Procedure (Id : E) return N;
6819 function Predicate_Function (Id : E) return N;
6821 procedure Set_Invariant_Procedure (Id : E; V : E);
6822 procedure Set_Predicate_Function (Id : E; V : E);
6824 -----------------------------------
6825 -- Field Initialization Routines --
6826 -----------------------------------
6828 -- These routines are overloadings of some of the above Set procedures
6829 -- where the argument is normally a Uint. The overloadings take an Int
6830 -- parameter instead, and appropriately convert it. There are also
6831 -- versions that implicitly initialize to the appropriate "not set"
6832 -- value. The not set (unknown) values are as follows:
6835 -- Component_Size Uint_0
6836 -- Component_Bit_Offset No_Uint
6837 -- Digits_Value Uint_0
6839 -- Normalized_First_Bit No_Uint
6840 -- Normalized_Position No_Uint
6841 -- Normalized_Position_Max No_Uint
6844 -- It would be cleaner to use No_Uint in all these cases, but historically
6845 -- we chose to use Uint_0 at first, and the change over will take time ???
6846 -- This is particularly true for the RM_Size field, where a value of zero
6847 -- is legitimate and causes some kludges around the code.
6849 -- Contrary to the corresponding Set procedures above, these routines
6850 -- do NOT check the entity kind of their argument, instead they set the
6851 -- underlying Uint fields directly (this allows them to be used for
6852 -- entities whose Ekind has not been set yet).
6854 procedure Init_Alignment (Id : E; V : Int);
6855 procedure Init_Component_Size (Id : E; V : Int);
6856 procedure Init_Component_Bit_Offset (Id : E; V : Int);
6857 procedure Init_Digits_Value (Id : E; V : Int);
6858 procedure Init_Esize (Id : E; V : Int);
6859 procedure Init_Normalized_First_Bit (Id : E; V : Int);
6860 procedure Init_Normalized_Position (Id : E; V : Int);
6861 procedure Init_Normalized_Position_Max (Id : E; V : Int);
6862 procedure Init_RM_Size (Id : E; V : Int);
6864 procedure Init_Alignment (Id : E);
6865 procedure Init_Component_Size (Id : E);
6866 procedure Init_Component_Bit_Offset (Id : E);
6867 procedure Init_Digits_Value (Id : E);
6868 procedure Init_Esize (Id : E);
6869 procedure Init_Normalized_First_Bit (Id : E);
6870 procedure Init_Normalized_Position (Id : E);
6871 procedure Init_Normalized_Position_Max (Id : E);
6872 procedure Init_RM_Size (Id : E);
6874 procedure Init_Size_Align (Id : E);
6875 -- This procedure initializes both size fields and the alignment
6876 -- field to all be Unknown.
6878 procedure Init_Size (Id : E; V : Int);
6879 -- Initialize both the Esize and RM_Size fields of E to V
6881 procedure Init_Component_Location (Id : E);
6882 -- Initializes all fields describing the location of a component
6883 -- (Normalized_Position, Component_Bit_Offset, Normalized_First_Bit,
6884 -- Normalized_Position_Max, Esize) to all be Unknown.
6890 -- The call to Next_xxx (obj) is equivalent to obj := Next_xxx (obj)
6891 -- We define the set of Proc_Next_xxx routines simply for the purposes
6892 -- of inlining them without necessarily inlining the function.
6894 procedure Proc_Next_Component (N : in out Node_Id);
6895 procedure Proc_Next_Component_Or_Discriminant (N : in out Node_Id);
6896 procedure Proc_Next_Discriminant (N : in out Node_Id);
6897 procedure Proc_Next_Formal (N : in out Node_Id);
6898 procedure Proc_Next_Formal_With_Extras (N : in out Node_Id);
6899 procedure Proc_Next_Index (N : in out Node_Id);
6900 procedure Proc_Next_Inlined_Subprogram (N : in out Node_Id);
6901 procedure Proc_Next_Literal (N : in out Node_Id);
6902 procedure Proc_Next_Stored_Discriminant (N : in out Node_Id);
6904 pragma Inline (Proc_Next_Component);
6905 pragma Inline (Proc_Next_Component_Or_Discriminant);
6906 pragma Inline (Proc_Next_Discriminant);
6907 pragma Inline (Proc_Next_Formal);
6908 pragma Inline (Proc_Next_Formal_With_Extras);
6909 pragma Inline (Proc_Next_Index);
6910 pragma Inline (Proc_Next_Inlined_Subprogram);
6911 pragma Inline (Proc_Next_Literal);
6912 pragma Inline (Proc_Next_Stored_Discriminant);
6914 procedure Next_Component (N : in out Node_Id)
6915 renames Proc_Next_Component;
6917 procedure Next_Component_Or_Discriminant (N : in out Node_Id)
6918 renames Proc_Next_Component_Or_Discriminant;
6920 procedure Next_Discriminant (N : in out Node_Id)
6921 renames Proc_Next_Discriminant;
6923 procedure Next_Formal (N : in out Node_Id)
6924 renames Proc_Next_Formal;
6926 procedure Next_Formal_With_Extras (N : in out Node_Id)
6927 renames Proc_Next_Formal_With_Extras;
6929 procedure Next_Index (N : in out Node_Id)
6930 renames Proc_Next_Index;
6932 procedure Next_Inlined_Subprogram (N : in out Node_Id)
6933 renames Proc_Next_Inlined_Subprogram;
6935 procedure Next_Literal (N : in out Node_Id)
6936 renames Proc_Next_Literal;
6938 procedure Next_Stored_Discriminant (N : in out Node_Id)
6939 renames Proc_Next_Stored_Discriminant;
6941 ---------------------------
6942 -- Testing Warning Flags --
6943 ---------------------------
6945 -- These routines are to be used rather than testing flags Warnings_Off,
6946 -- Has_Pragma_Unmodified, Has_Pragma_Unreferenced. They deal with setting
6947 -- the flags Warnings_Off_Used[_Unmodified|Unreferenced] for later access.
6949 function Has_Warnings_Off (E : Entity_Id) return Boolean;
6950 -- If Warnings_Off is set on E, then returns True and also sets the flag
6951 -- Warnings_Off_Used on E. If Warnings_Off is not set on E, returns False
6952 -- and has no side effect.
6954 function Has_Unmodified (E : Entity_Id) return Boolean;
6955 -- If flag Has_Pragma_Unmodified is set on E, returns True with no side
6956 -- effects. Otherwise if Warnings_Off is set on E, returns True and also
6957 -- sets the flag Warnings_Off_Used_Unmodified on E. If neither of the flags
6958 -- Warnings_Off nor Has_Pragma_Unmodified is set, returns False with no
6961 function Has_Unreferenced (E : Entity_Id) return Boolean;
6962 -- If flag Has_Pragma_Unreferenced is set on E, returns True with no side
6963 -- effects. Otherwise if Warnings_Off is set on E, returns True and also
6964 -- sets the flag Warnings_Off_Used_Unreferenced on E. If neither of the
6965 -- flags Warnings_Off nor Has_Pragma_Unreferenced is set, returns False
6966 -- with no side effects.
6968 ----------------------------------------------
6969 -- Subprograms for Accessing Rep Item Chain --
6970 ----------------------------------------------
6972 -- The First_Rep_Item field of every entity points to a linked list (linked
6973 -- through Next_Rep_Item) of representation pragmas, attribute definition
6974 -- clauses, representation clauses, and aspect specifications that apply to
6975 -- the item. Note that in the case of types, it is assumed that any such
6976 -- rep items for a base type also apply to all subtypes. This is achieved
6977 -- by having the chain for subtypes link onto the chain for the base type,
6978 -- so that new entries for the subtype are added at the start of the chain.
6980 -- Note: aspect specification nodes are linked only when evaluation of the
6981 -- expression is deferred to the freeze point. For further details see
6982 -- Sem_Ch13.Analyze_Aspect_Specifications.
6984 function Get_Attribute_Definition_Clause
6986 Id : Attribute_Id) return Node_Id;
6987 -- Searches the Rep_Item chain for a given entity E, for an instance of an
6988 -- attribute definition clause with the given attribute Id. If found, the
6989 -- value returned is the N_Attribute_Definition_Clause node, otherwise
6990 -- Empty is returned.
6992 function Get_Rep_Item_For_Entity
6994 Nam : Name_Id) return Node_Id;
6995 -- Searches the Rep_Item chain for a given entity E, for an instance of a
6996 -- rep item (pragma, attribute definition clause, or aspect specitication)
6997 -- whose name matches the given name. If one is found, it is returned,
6998 -- otherwise Empty is returned. Unlike the other Get routines for the
6999 -- Rep_Item chain, this only returns items whose entity matches E (it
7000 -- does not return items from the parent chain).
7002 function Get_Record_Representation_Clause (E : Entity_Id) return Node_Id;
7003 -- Searches the Rep_Item chain for a given entity E, for a record
7004 -- representation clause, and if found, returns it. Returns Empty
7005 -- if no such clause is found.
7007 function Get_Rep_Pragma (E : Entity_Id; Nam : Name_Id) return Node_Id;
7008 -- Searches the Rep_Item chain for the given entity E, for an instance
7009 -- a representation pragma with the given name Nam. If found then the
7010 -- value returned is the N_Pragma node, otherwise Empty is returned.
7012 function Has_Rep_Pragma (E : Entity_Id; Nam : Name_Id) return Boolean;
7013 -- Searches the Rep_Item chain for the given entity E, for an instance
7014 -- of representation pragma with the given name Nam. If found then True
7015 -- is returned, otherwise False indicates that no matching entry was found.
7017 function Has_Attribute_Definition_Clause
7019 Id : Attribute_Id) return Boolean;
7020 -- Searches the Rep_Item chain for a given entity E, for an instance of an
7021 -- attribute definition clause with the given attribute Id. If found, True
7022 -- is returned, otherwise False indicates that no matching entry was found.
7024 procedure Record_Rep_Item (E : Entity_Id; N : Node_Id);
7025 -- N is the node for a representation pragma, representation clause, an
7026 -- attribute definition clause, or an aspect specification that applies to
7027 -- entity E. This procedure links the node N onto the Rep_Item chain for
7028 -- entity E. Note that it is an error to call this procedure with E being
7029 -- overloadable, and N being a pragma that applies to multiple overloadable
7030 -- entities (Convention, Interface, Inline, Inline_Always, Import, Export,
7031 -- External). This is not allowed even in the case where the entity is not
7032 -- overloaded, since we can't rely on it being present in the overloaded
7033 -- case, it is not useful to have it present in the non-overloaded case.
7035 -------------------------------
7036 -- Miscellaneous Subprograms --
7037 -------------------------------
7039 procedure Append_Entity (Id : Entity_Id; V : Entity_Id);
7040 -- Add an entity to the list of entities declared in the scope V
7042 function Get_Full_View (T : Entity_Id) return Entity_Id;
7043 -- If T is an incomplete type and the full declaration has been seen, or
7044 -- is the name of a class_wide type whose root is incomplete, return the
7045 -- corresponding full declaration, else return T itself.
7047 function Is_Entity_Name (N : Node_Id) return Boolean;
7048 -- Test if the node N is the name of an entity (i.e. is an identifier,
7049 -- expanded name, or an attribute reference that returns an entity).
7051 function Next_Index (Id : Node_Id) return Node_Id;
7052 -- Given an index from a previous call to First_Index or Next_Index,
7053 -- returns a node representing the occurrence of the next index subtype,
7054 -- or Empty if there are no more index subtypes.
7056 function Scope_Depth (Id : Entity_Id) return Uint;
7057 -- Returns the scope depth value of the Id, unless the Id is a record
7058 -- type, in which case it returns the scope depth of the record scope.
7060 function Subtype_Kind (K : Entity_Kind) return Entity_Kind;
7061 -- Given an entity_kind K this function returns the entity_kind
7062 -- corresponding to subtype kind of the type represented by K. For
7063 -- example if K is E_Signed_Integer_Type then E_Signed_Integer_Subtype
7064 -- is returned. If K is already a subtype kind it itself is returned. An
7065 -- internal error is generated if no such correspondence exists for K.
7067 ----------------------------------
7068 -- Debugging Output Subprograms --
7069 ----------------------------------
7071 procedure Write_Entity_Flags (Id : Entity_Id; Prefix : String);
7072 -- Writes a series of entries giving a line for each flag that is
7073 -- set to True. Each line is prefixed by the given string
7075 procedure Write_Entity_Info (Id : Entity_Id; Prefix : String);
7076 -- A debugging procedure to write out information about an entity
7078 procedure Write_Field6_Name (Id : Entity_Id);
7079 procedure Write_Field7_Name (Id : Entity_Id);
7080 procedure Write_Field8_Name (Id : Entity_Id);
7081 procedure Write_Field9_Name (Id : Entity_Id);
7082 procedure Write_Field10_Name (Id : Entity_Id);
7083 procedure Write_Field11_Name (Id : Entity_Id);
7084 procedure Write_Field12_Name (Id : Entity_Id);
7085 procedure Write_Field13_Name (Id : Entity_Id);
7086 procedure Write_Field14_Name (Id : Entity_Id);
7087 procedure Write_Field15_Name (Id : Entity_Id);
7088 procedure Write_Field16_Name (Id : Entity_Id);
7089 procedure Write_Field17_Name (Id : Entity_Id);
7090 procedure Write_Field18_Name (Id : Entity_Id);
7091 procedure Write_Field19_Name (Id : Entity_Id);
7092 procedure Write_Field20_Name (Id : Entity_Id);
7093 procedure Write_Field21_Name (Id : Entity_Id);
7094 procedure Write_Field22_Name (Id : Entity_Id);
7095 procedure Write_Field23_Name (Id : Entity_Id);
7096 procedure Write_Field24_Name (Id : Entity_Id);
7097 procedure Write_Field25_Name (Id : Entity_Id);
7098 procedure Write_Field26_Name (Id : Entity_Id);
7099 procedure Write_Field27_Name (Id : Entity_Id);
7100 procedure Write_Field28_Name (Id : Entity_Id);
7101 procedure Write_Field29_Name (Id : Entity_Id);
7102 -- These routines are used in Treepr to output a nice symbolic name for
7103 -- the given field, depending on the Ekind. No blanks or end of lines are
7104 -- output, just the characters of the field name.
7106 --------------------
7107 -- Inline Pragmas --
7108 --------------------
7110 -- Note that these inline pragmas are referenced by the XEINFO utility
7111 -- program in preparing the corresponding C header, and only those
7112 -- subprograms meeting the requirements documented in the section on
7113 -- XEINFO may be referenced in this section.
7115 pragma Inline (Accept_Address);
7116 pragma Inline (Access_Disp_Table);
7117 pragma Inline (Actual_Subtype);
7118 pragma Inline (Address_Taken);
7119 pragma Inline (Alias);
7120 pragma Inline (Alignment);
7121 pragma Inline (Associated_Final_Chain);
7122 pragma Inline (Associated_Formal_Package);
7123 pragma Inline (Associated_Node_For_Itype);
7124 pragma Inline (Associated_Storage_Pool);
7125 pragma Inline (Barrier_Function);
7126 pragma Inline (Block_Node);
7127 pragma Inline (Body_Entity);
7128 pragma Inline (Body_Needed_For_SAL);
7129 pragma Inline (CR_Discriminant);
7130 pragma Inline (C_Pass_By_Copy);
7131 pragma Inline (Can_Never_Be_Null);
7132 pragma Inline (Checks_May_Be_Suppressed);
7133 pragma Inline (Class_Wide_Type);
7134 pragma Inline (Cloned_Subtype);
7135 pragma Inline (Component_Bit_Offset);
7136 pragma Inline (Component_Clause);
7137 pragma Inline (Component_Size);
7138 pragma Inline (Component_Type);
7139 pragma Inline (Corresponding_Concurrent_Type);
7140 pragma Inline (Corresponding_Discriminant);
7141 pragma Inline (Corresponding_Equality);
7142 pragma Inline (Corresponding_Protected_Entry);
7143 pragma Inline (Corresponding_Record_Type);
7144 pragma Inline (Corresponding_Remote_Type);
7145 pragma Inline (Current_Use_Clause);
7146 pragma Inline (Current_Value);
7147 pragma Inline (Debug_Info_Off);
7148 pragma Inline (Debug_Renaming_Link);
7149 pragma Inline (Dispatch_Table_Wrappers);
7150 pragma Inline (DTC_Entity);
7151 pragma Inline (DT_Entry_Count);
7152 pragma Inline (DT_Offset_To_Top_Func);
7153 pragma Inline (DT_Position);
7154 pragma Inline (Default_Expr_Function);
7155 pragma Inline (Default_Expressions_Processed);
7156 pragma Inline (Default_Value);
7157 pragma Inline (Delay_Cleanups);
7158 pragma Inline (Delay_Subprogram_Descriptors);
7159 pragma Inline (Delta_Value);
7160 pragma Inline (Dependent_Instances);
7161 pragma Inline (Depends_On_Private);
7162 pragma Inline (Digits_Value);
7163 pragma Inline (Direct_Primitive_Operations);
7164 pragma Inline (Directly_Designated_Type);
7165 pragma Inline (Discard_Names);
7166 pragma Inline (Discriminal);
7167 pragma Inline (Discriminal_Link);
7168 pragma Inline (Discriminant_Checking_Func);
7169 pragma Inline (Discriminant_Constraint);
7170 pragma Inline (Discriminant_Default_Value);
7171 pragma Inline (Discriminant_Number);
7172 pragma Inline (Elaborate_Body_Desirable);
7173 pragma Inline (Elaboration_Entity);
7174 pragma Inline (Elaboration_Entity_Required);
7175 pragma Inline (Enclosing_Scope);
7176 pragma Inline (Entry_Accepted);
7177 pragma Inline (Entry_Bodies_Array);
7178 pragma Inline (Entry_Cancel_Parameter);
7179 pragma Inline (Entry_Component);
7180 pragma Inline (Entry_Formal);
7181 pragma Inline (Entry_Index_Constant);
7182 pragma Inline (Entry_Index_Type);
7183 pragma Inline (Entry_Parameters_Type);
7184 pragma Inline (Enum_Pos_To_Rep);
7185 pragma Inline (Enumeration_Pos);
7186 pragma Inline (Enumeration_Rep);
7187 pragma Inline (Enumeration_Rep_Expr);
7188 pragma Inline (Equivalent_Type);
7189 pragma Inline (Esize);
7190 pragma Inline (Exception_Code);
7191 pragma Inline (Extra_Accessibility);
7192 pragma Inline (Extra_Constrained);
7193 pragma Inline (Extra_Formal);
7194 pragma Inline (Extra_Formals);
7195 pragma Inline (Can_Use_Internal_Rep);
7196 pragma Inline (Finalization_Chain_Entity);
7197 pragma Inline (First_Entity);
7198 pragma Inline (First_Exit_Statement);
7199 pragma Inline (First_Index);
7200 pragma Inline (First_Literal);
7201 pragma Inline (First_Optional_Parameter);
7202 pragma Inline (First_Private_Entity);
7203 pragma Inline (First_Rep_Item);
7204 pragma Inline (Freeze_Node);
7205 pragma Inline (From_With_Type);
7206 pragma Inline (Full_View);
7207 pragma Inline (Generic_Homonym);
7208 pragma Inline (Generic_Renamings);
7209 pragma Inline (Handler_Records);
7210 pragma Inline (Has_Aliased_Components);
7211 pragma Inline (Has_Alignment_Clause);
7212 pragma Inline (Has_All_Calls_Remote);
7213 pragma Inline (Has_Anon_Block_Suffix);
7214 pragma Inline (Has_Atomic_Components);
7215 pragma Inline (Has_Biased_Representation);
7216 pragma Inline (Has_Completion);
7217 pragma Inline (Has_Completion_In_Body);
7218 pragma Inline (Has_Complex_Representation);
7219 pragma Inline (Has_Component_Size_Clause);
7220 pragma Inline (Has_Constrained_Partial_View);
7221 pragma Inline (Has_Contiguous_Rep);
7222 pragma Inline (Has_Controlled_Component);
7223 pragma Inline (Has_Controlling_Result);
7224 pragma Inline (Has_Convention_Pragma);
7225 pragma Inline (Has_Delayed_Aspects);
7226 pragma Inline (Has_Delayed_Freeze);
7227 pragma Inline (Has_Discriminants);
7228 pragma Inline (Has_Dispatch_Table);
7229 pragma Inline (Has_Enumeration_Rep_Clause);
7230 pragma Inline (Has_Exit);
7231 pragma Inline (Has_External_Tag_Rep_Clause);
7232 pragma Inline (Has_Fully_Qualified_Name);
7233 pragma Inline (Has_Gigi_Rep_Item);
7234 pragma Inline (Has_Homonym);
7235 pragma Inline (Has_Inheritable_Invariants);
7236 pragma Inline (Has_Initial_Value);
7237 pragma Inline (Has_Invariants);
7238 pragma Inline (Has_Machine_Radix_Clause);
7239 pragma Inline (Has_Master_Entity);
7240 pragma Inline (Has_Missing_Return);
7241 pragma Inline (Has_Nested_Block_With_Handler);
7242 pragma Inline (Has_Forward_Instantiation);
7243 pragma Inline (Has_Non_Standard_Rep);
7244 pragma Inline (Has_Object_Size_Clause);
7245 pragma Inline (Has_Per_Object_Constraint);
7246 pragma Inline (Has_Persistent_BSS);
7247 pragma Inline (Has_Postconditions);
7248 pragma Inline (Has_Pragma_Controlled);
7249 pragma Inline (Has_Pragma_Elaborate_Body);
7250 pragma Inline (Has_Pragma_Inline);
7251 pragma Inline (Has_Pragma_Inline_Always);
7252 pragma Inline (Has_Pragma_Ordered);
7253 pragma Inline (Has_Pragma_Pack);
7254 pragma Inline (Has_Pragma_Preelab_Init);
7255 pragma Inline (Has_Pragma_Pure);
7256 pragma Inline (Has_Pragma_Pure_Function);
7257 pragma Inline (Has_Pragma_Thread_Local_Storage);
7258 pragma Inline (Has_Pragma_Unmodified);
7259 pragma Inline (Has_Pragma_Unreferenced);
7260 pragma Inline (Has_Pragma_Unreferenced_Objects);
7261 pragma Inline (Has_Predicates);
7262 pragma Inline (Has_Primitive_Operations);
7263 pragma Inline (Has_Private_Declaration);
7264 pragma Inline (Has_Qualified_Name);
7265 pragma Inline (Has_RACW);
7266 pragma Inline (Has_Record_Rep_Clause);
7267 pragma Inline (Has_Recursive_Call);
7268 pragma Inline (Has_Size_Clause);
7269 pragma Inline (Has_Small_Clause);
7270 pragma Inline (Has_Specified_Layout);
7271 pragma Inline (Has_Specified_Stream_Input);
7272 pragma Inline (Has_Specified_Stream_Output);
7273 pragma Inline (Has_Specified_Stream_Read);
7274 pragma Inline (Has_Specified_Stream_Write);
7275 pragma Inline (Has_Static_Discriminants);
7276 pragma Inline (Has_Storage_Size_Clause);
7277 pragma Inline (Has_Stream_Size_Clause);
7278 pragma Inline (Has_Subprogram_Descriptor);
7279 pragma Inline (Has_Task);
7280 pragma Inline (Has_Thunks);
7281 pragma Inline (Has_Unchecked_Union);
7282 pragma Inline (Has_Unknown_Discriminants);
7283 pragma Inline (Has_Up_Level_Access);
7284 pragma Inline (Has_Volatile_Components);
7285 pragma Inline (Has_Xref_Entry);
7286 pragma Inline (Hiding_Loop_Variable);
7287 pragma Inline (Homonym);
7288 pragma Inline (Interfaces);
7289 pragma Inline (In_Package_Body);
7290 pragma Inline (In_Private_Part);
7291 pragma Inline (In_Use);
7292 pragma Inline (Inner_Instances);
7293 pragma Inline (Interface_Alias);
7294 pragma Inline (Interface_Name);
7295 pragma Inline (Is_AST_Entry);
7296 pragma Inline (Is_Abstract_Subprogram);
7297 pragma Inline (Is_Abstract_Type);
7298 pragma Inline (Is_Access_Constant);
7299 pragma Inline (Is_Ada_2005_Only);
7300 pragma Inline (Is_Ada_2012_Only);
7301 pragma Inline (Is_Access_Type);
7302 pragma Inline (Is_Access_Protected_Subprogram_Type);
7303 pragma Inline (Is_Access_Subprogram_Type);
7304 pragma Inline (Is_Aggregate_Type);
7305 pragma Inline (Is_Aliased);
7306 pragma Inline (Is_Array_Type);
7307 pragma Inline (Is_Assignable);
7308 pragma Inline (Is_Asynchronous);
7309 pragma Inline (Is_Atomic);
7310 pragma Inline (Is_Bit_Packed_Array);
7311 pragma Inline (Is_CPP_Class);
7312 pragma Inline (Is_Called);
7313 pragma Inline (Is_Character_Type);
7314 pragma Inline (Is_Child_Unit);
7315 pragma Inline (Is_Class_Wide_Equivalent_Type);
7316 pragma Inline (Is_Class_Wide_Type);
7317 pragma Inline (Is_Compilation_Unit);
7318 pragma Inline (Is_Completely_Hidden);
7319 pragma Inline (Is_Composite_Type);
7320 pragma Inline (Is_Concurrent_Body);
7321 pragma Inline (Is_Concurrent_Record_Type);
7322 pragma Inline (Is_Concurrent_Type);
7323 pragma Inline (Is_Constr_Subt_For_UN_Aliased);
7324 pragma Inline (Is_Constr_Subt_For_U_Nominal);
7325 pragma Inline (Is_Constrained);
7326 pragma Inline (Is_Constructor);
7327 pragma Inline (Is_Controlled);
7328 pragma Inline (Is_Controlling_Formal);
7329 pragma Inline (Is_Decimal_Fixed_Point_Type);
7330 pragma Inline (Is_Discrim_SO_Function);
7331 pragma Inline (Is_Digits_Type);
7332 pragma Inline (Is_Descendent_Of_Address);
7333 pragma Inline (Is_Discrete_Or_Fixed_Point_Type);
7334 pragma Inline (Is_Discrete_Type);
7335 pragma Inline (Is_Dispatch_Table_Entity);
7336 pragma Inline (Is_Dispatching_Operation);
7337 pragma Inline (Is_Elementary_Type);
7338 pragma Inline (Is_Eliminated);
7339 pragma Inline (Is_Entry);
7340 pragma Inline (Is_Entry_Formal);
7341 pragma Inline (Is_Enumeration_Type);
7342 pragma Inline (Is_Exported);
7343 pragma Inline (Is_First_Subtype);
7344 pragma Inline (Is_Fixed_Point_Type);
7345 pragma Inline (Is_Floating_Point_Type);
7346 pragma Inline (Is_For_Access_Subtype);
7347 pragma Inline (Is_Formal);
7348 pragma Inline (Is_Formal_Object);
7349 pragma Inline (Is_Formal_Subprogram);
7350 pragma Inline (Is_Frozen);
7351 pragma Inline (Is_Generic_Actual_Type);
7352 pragma Inline (Is_Generic_Instance);
7353 pragma Inline (Is_Generic_Subprogram);
7354 pragma Inline (Is_Generic_Type);
7355 pragma Inline (Is_Generic_Unit);
7356 pragma Inline (Is_Hidden);
7357 pragma Inline (Is_Hidden_Open_Scope);
7358 pragma Inline (Is_Immediately_Visible);
7359 pragma Inline (Is_Imported);
7360 pragma Inline (Is_Incomplete_Or_Private_Type);
7361 pragma Inline (Is_Incomplete_Type);
7362 pragma Inline (Is_Inlined);
7363 pragma Inline (Is_Interface);
7364 pragma Inline (Is_Instantiated);
7365 pragma Inline (Is_Integer_Type);
7366 pragma Inline (Is_Internal);
7367 pragma Inline (Is_Interrupt_Handler);
7368 pragma Inline (Is_Intrinsic_Subprogram);
7369 pragma Inline (Is_Itype);
7370 pragma Inline (Is_Known_Non_Null);
7371 pragma Inline (Is_Known_Null);
7372 pragma Inline (Is_Known_Valid);
7373 pragma Inline (Is_Limited_Composite);
7374 pragma Inline (Is_Limited_Interface);
7375 pragma Inline (Is_Limited_Record);
7376 pragma Inline (Is_Local_Anonymous_Access);
7377 pragma Inline (Is_Machine_Code_Subprogram);
7378 pragma Inline (Is_Modular_Integer_Type);
7379 pragma Inline (Is_Named_Number);
7380 pragma Inline (Is_Non_Static_Subtype);
7381 pragma Inline (Is_Null_Init_Proc);
7382 pragma Inline (Is_Obsolescent);
7383 pragma Inline (Is_Only_Out_Parameter);
7384 pragma Inline (Is_Numeric_Type);
7385 pragma Inline (Is_Object);
7386 pragma Inline (Is_Optional_Parameter);
7387 pragma Inline (Is_Package_Body_Entity);
7388 pragma Inline (Is_Ordinary_Fixed_Point_Type);
7389 pragma Inline (Is_Overloadable);
7390 pragma Inline (Is_Overriding_Operation);
7391 pragma Inline (Is_Packed);
7392 pragma Inline (Is_Packed_Array_Type);
7393 pragma Inline (Is_Potentially_Use_Visible);
7394 pragma Inline (Is_Preelaborated);
7395 pragma Inline (Is_Primitive);
7396 pragma Inline (Is_Primitive_Wrapper);
7397 pragma Inline (Is_Private_Composite);
7398 pragma Inline (Is_Private_Descendant);
7399 pragma Inline (Is_Private_Primitive);
7400 pragma Inline (Is_Private_Type);
7401 pragma Inline (Is_Protected_Type);
7402 pragma Inline (Is_Public);
7403 pragma Inline (Is_Pure);
7404 pragma Inline (Is_Pure_Unit_Access_Type);
7405 pragma Inline (Is_RACW_Stub_Type);
7406 pragma Inline (Is_Raised);
7407 pragma Inline (Is_Real_Type);
7408 pragma Inline (Is_Record_Type);
7409 pragma Inline (Is_Remote_Call_Interface);
7410 pragma Inline (Is_Remote_Types);
7411 pragma Inline (Is_Renaming_Of_Object);
7412 pragma Inline (Is_Return_Object);
7413 pragma Inline (Is_Scalar_Type);
7414 pragma Inline (Is_Shared_Passive);
7415 pragma Inline (Is_Signed_Integer_Type);
7416 pragma Inline (Is_Statically_Allocated);
7417 pragma Inline (Is_Subprogram);
7418 pragma Inline (Is_Tag);
7419 pragma Inline (Is_Tagged_Type);
7420 pragma Inline (Is_True_Constant);
7421 pragma Inline (Is_Task_Type);
7422 pragma Inline (Is_Thunk);
7423 pragma Inline (Is_Trivial_Subprogram);
7424 pragma Inline (Is_Type);
7425 pragma Inline (Is_Unchecked_Union);
7426 pragma Inline (Is_Underlying_Record_View);
7427 pragma Inline (Is_Unsigned_Type);
7428 pragma Inline (Is_VMS_Exception);
7429 pragma Inline (Is_Valued_Procedure);
7430 pragma Inline (Is_Visible_Child_Unit);
7431 pragma Inline (Is_Visible_Formal);
7432 pragma Inline (Itype_Printed);
7433 pragma Inline (Kill_Elaboration_Checks);
7434 pragma Inline (Kill_Range_Checks);
7435 pragma Inline (Kill_Tag_Checks);
7436 pragma Inline (Known_To_Have_Preelab_Init);
7437 pragma Inline (Last_Assignment);
7438 pragma Inline (Last_Entity);
7439 pragma Inline (Limited_View);
7440 pragma Inline (Lit_Indexes);
7441 pragma Inline (Lit_Strings);
7442 pragma Inline (Low_Bound_Tested);
7443 pragma Inline (Machine_Radix_10);
7444 pragma Inline (Master_Id);
7445 pragma Inline (Materialize_Entity);
7446 pragma Inline (Mechanism);
7447 pragma Inline (Modulus);
7448 pragma Inline (Must_Be_On_Byte_Boundary);
7449 pragma Inline (Must_Have_Preelab_Init);
7450 pragma Inline (Needs_Debug_Info);
7451 pragma Inline (Needs_No_Actuals);
7452 pragma Inline (Never_Set_In_Source);
7453 pragma Inline (Next_Index);
7454 pragma Inline (Next_Inlined_Subprogram);
7455 pragma Inline (Next_Literal);
7456 pragma Inline (No_Pool_Assigned);
7457 pragma Inline (No_Return);
7458 pragma Inline (No_Strict_Aliasing);
7459 pragma Inline (Non_Binary_Modulus);
7460 pragma Inline (Non_Limited_View);
7461 pragma Inline (Nonzero_Is_True);
7462 pragma Inline (Normalized_First_Bit);
7463 pragma Inline (Normalized_Position);
7464 pragma Inline (Normalized_Position_Max);
7465 pragma Inline (OK_To_Reference);
7466 pragma Inline (OK_To_Rename);
7467 pragma Inline (OK_To_Reorder_Components);
7468 pragma Inline (Optimize_Alignment_Space);
7469 pragma Inline (Optimize_Alignment_Time);
7470 pragma Inline (Original_Array_Type);
7471 pragma Inline (Original_Record_Component);
7472 pragma Inline (Overlays_Constant);
7473 pragma Inline (Overridden_Operation);
7474 pragma Inline (Package_Instantiation);
7475 pragma Inline (Packed_Array_Type);
7476 pragma Inline (Parameter_Mode);
7477 pragma Inline (Parent_Subtype);
7478 pragma Inline (Postcondition_Proc);
7479 pragma Inline (PPC_Wrapper);
7480 pragma Inline (Prival);
7481 pragma Inline (Prival_Link);
7482 pragma Inline (Private_Dependents);
7483 pragma Inline (Private_View);
7484 pragma Inline (Protected_Body_Subprogram);
7485 pragma Inline (Protected_Formal);
7486 pragma Inline (Protection_Object);
7487 pragma Inline (RM_Size);
7488 pragma Inline (Reachable);
7489 pragma Inline (Referenced);
7490 pragma Inline (Referenced_As_LHS);
7491 pragma Inline (Referenced_As_Out_Parameter);
7492 pragma Inline (Register_Exception_Call);
7493 pragma Inline (Related_Array_Object);
7494 pragma Inline (Related_Expression);
7495 pragma Inline (Related_Instance);
7496 pragma Inline (Related_Type);
7497 pragma Inline (Relative_Deadline_Variable);
7498 pragma Inline (Renamed_Entity);
7499 pragma Inline (Renamed_In_Spec);
7500 pragma Inline (Renamed_Object);
7501 pragma Inline (Renaming_Map);
7502 pragma Inline (Requires_Overriding);
7503 pragma Inline (Return_Present);
7504 pragma Inline (Return_Applies_To);
7505 pragma Inline (Returns_By_Ref);
7506 pragma Inline (Reverse_Bit_Order);
7507 pragma Inline (Scalar_Range);
7508 pragma Inline (Scale_Value);
7509 pragma Inline (Scope_Depth_Value);
7510 pragma Inline (Sec_Stack_Needed_For_Return);
7511 pragma Inline (Shadow_Entities);
7512 pragma Inline (Shared_Var_Procs_Instance);
7513 pragma Inline (Size_Check_Code);
7514 pragma Inline (Size_Depends_On_Discriminant);
7515 pragma Inline (Size_Known_At_Compile_Time);
7516 pragma Inline (Small_Value);
7517 pragma Inline (Spec_Entity);
7518 pragma Inline (Spec_PPC_List);
7519 pragma Inline (Storage_Size_Variable);
7520 pragma Inline (Static_Elaboration_Desired);
7521 pragma Inline (Static_Initialization);
7522 pragma Inline (Stored_Constraint);
7523 pragma Inline (Strict_Alignment);
7524 pragma Inline (String_Literal_Length);
7525 pragma Inline (String_Literal_Low_Bound);
7526 pragma Inline (Subprograms_For_Type);
7527 pragma Inline (Suppress_Elaboration_Warnings);
7528 pragma Inline (Suppress_Init_Proc);
7529 pragma Inline (Suppress_Style_Checks);
7530 pragma Inline (Suppress_Value_Tracking_On_Call);
7531 pragma Inline (Task_Body_Procedure);
7532 pragma Inline (Treat_As_Volatile);
7533 pragma Inline (Underlying_Full_View);
7534 pragma Inline (Underlying_Record_View);
7535 pragma Inline (Universal_Aliasing);
7536 pragma Inline (Unset_Reference);
7537 pragma Inline (Used_As_Generic_Actual);
7538 pragma Inline (Uses_Sec_Stack);
7539 pragma Inline (Vax_Float);
7540 pragma Inline (Warnings_Off);
7541 pragma Inline (Warnings_Off_Used);
7542 pragma Inline (Warnings_Off_Used_Unmodified);
7543 pragma Inline (Warnings_Off_Used_Unreferenced);
7544 pragma Inline (Was_Hidden);
7545 pragma Inline (Wrapped_Entity);
7547 pragma Inline (Init_Alignment);
7548 pragma Inline (Init_Component_Bit_Offset);
7549 pragma Inline (Init_Component_Size);
7550 pragma Inline (Init_Digits_Value);
7551 pragma Inline (Init_Esize);
7552 pragma Inline (Init_RM_Size);
7554 pragma Inline (Set_Accept_Address);
7555 pragma Inline (Set_Access_Disp_Table);
7556 pragma Inline (Set_Actual_Subtype);
7557 pragma Inline (Set_Address_Taken);
7558 pragma Inline (Set_Alias);
7559 pragma Inline (Set_Alignment);
7560 pragma Inline (Set_Associated_Final_Chain);
7561 pragma Inline (Set_Associated_Formal_Package);
7562 pragma Inline (Set_Associated_Node_For_Itype);
7563 pragma Inline (Set_Associated_Storage_Pool);
7564 pragma Inline (Set_Barrier_Function);
7565 pragma Inline (Set_Block_Node);
7566 pragma Inline (Set_Body_Entity);
7567 pragma Inline (Set_Body_Needed_For_SAL);
7568 pragma Inline (Set_CR_Discriminant);
7569 pragma Inline (Set_C_Pass_By_Copy);
7570 pragma Inline (Set_Can_Never_Be_Null);
7571 pragma Inline (Set_Checks_May_Be_Suppressed);
7572 pragma Inline (Set_Class_Wide_Type);
7573 pragma Inline (Set_Cloned_Subtype);
7574 pragma Inline (Set_Component_Bit_Offset);
7575 pragma Inline (Set_Component_Clause);
7576 pragma Inline (Set_Component_Size);
7577 pragma Inline (Set_Component_Type);
7578 pragma Inline (Set_Corresponding_Concurrent_Type);
7579 pragma Inline (Set_Corresponding_Discriminant);
7580 pragma Inline (Set_Corresponding_Equality);
7581 pragma Inline (Set_Corresponding_Protected_Entry);
7582 pragma Inline (Set_Corresponding_Record_Type);
7583 pragma Inline (Set_Corresponding_Remote_Type);
7584 pragma Inline (Set_Current_Use_Clause);
7585 pragma Inline (Set_Current_Value);
7586 pragma Inline (Set_Debug_Info_Off);
7587 pragma Inline (Set_Debug_Renaming_Link);
7588 pragma Inline (Set_Dispatch_Table_Wrappers);
7589 pragma Inline (Set_DTC_Entity);
7590 pragma Inline (Set_DT_Entry_Count);
7591 pragma Inline (Set_DT_Offset_To_Top_Func);
7592 pragma Inline (Set_DT_Position);
7593 pragma Inline (Set_Relative_Deadline_Variable);
7594 pragma Inline (Set_Default_Expr_Function);
7595 pragma Inline (Set_Default_Expressions_Processed);
7596 pragma Inline (Set_Default_Value);
7597 pragma Inline (Set_Delay_Cleanups);
7598 pragma Inline (Set_Delay_Subprogram_Descriptors);
7599 pragma Inline (Set_Delta_Value);
7600 pragma Inline (Set_Dependent_Instances);
7601 pragma Inline (Set_Depends_On_Private);
7602 pragma Inline (Set_Digits_Value);
7603 pragma Inline (Set_Direct_Primitive_Operations);
7604 pragma Inline (Set_Directly_Designated_Type);
7605 pragma Inline (Set_Discard_Names);
7606 pragma Inline (Set_Discriminal);
7607 pragma Inline (Set_Discriminal_Link);
7608 pragma Inline (Set_Discriminant_Checking_Func);
7609 pragma Inline (Set_Discriminant_Constraint);
7610 pragma Inline (Set_Discriminant_Default_Value);
7611 pragma Inline (Set_Discriminant_Number);
7612 pragma Inline (Set_Elaborate_Body_Desirable);
7613 pragma Inline (Set_Elaboration_Entity);
7614 pragma Inline (Set_Elaboration_Entity_Required);
7615 pragma Inline (Set_Enclosing_Scope);
7616 pragma Inline (Set_Entry_Accepted);
7617 pragma Inline (Set_Entry_Bodies_Array);
7618 pragma Inline (Set_Entry_Cancel_Parameter);
7619 pragma Inline (Set_Entry_Component);
7620 pragma Inline (Set_Entry_Formal);
7621 pragma Inline (Set_Entry_Parameters_Type);
7622 pragma Inline (Set_Enum_Pos_To_Rep);
7623 pragma Inline (Set_Enumeration_Pos);
7624 pragma Inline (Set_Enumeration_Rep);
7625 pragma Inline (Set_Enumeration_Rep_Expr);
7626 pragma Inline (Set_Equivalent_Type);
7627 pragma Inline (Set_Esize);
7628 pragma Inline (Set_Exception_Code);
7629 pragma Inline (Set_Extra_Accessibility);
7630 pragma Inline (Set_Extra_Constrained);
7631 pragma Inline (Set_Extra_Formal);
7632 pragma Inline (Set_Extra_Formals);
7633 pragma Inline (Set_Can_Use_Internal_Rep);
7634 pragma Inline (Set_Finalization_Chain_Entity);
7635 pragma Inline (Set_First_Entity);
7636 pragma Inline (Set_First_Exit_Statement);
7637 pragma Inline (Set_First_Index);
7638 pragma Inline (Set_First_Literal);
7639 pragma Inline (Set_First_Optional_Parameter);
7640 pragma Inline (Set_First_Private_Entity);
7641 pragma Inline (Set_First_Rep_Item);
7642 pragma Inline (Set_Freeze_Node);
7643 pragma Inline (Set_From_With_Type);
7644 pragma Inline (Set_Full_View);
7645 pragma Inline (Set_Generic_Homonym);
7646 pragma Inline (Set_Generic_Renamings);
7647 pragma Inline (Set_Handler_Records);
7648 pragma Inline (Set_Has_Aliased_Components);
7649 pragma Inline (Set_Has_Alignment_Clause);
7650 pragma Inline (Set_Has_All_Calls_Remote);
7651 pragma Inline (Set_Has_Anon_Block_Suffix);
7652 pragma Inline (Set_Has_Atomic_Components);
7653 pragma Inline (Set_Has_Biased_Representation);
7654 pragma Inline (Set_Has_Completion);
7655 pragma Inline (Set_Has_Completion_In_Body);
7656 pragma Inline (Set_Has_Complex_Representation);
7657 pragma Inline (Set_Has_Component_Size_Clause);
7658 pragma Inline (Set_Has_Constrained_Partial_View);
7659 pragma Inline (Set_Has_Contiguous_Rep);
7660 pragma Inline (Set_Has_Controlled_Component);
7661 pragma Inline (Set_Has_Controlling_Result);
7662 pragma Inline (Set_Has_Convention_Pragma);
7663 pragma Inline (Set_Has_Delayed_Aspects);
7664 pragma Inline (Set_Has_Delayed_Freeze);
7665 pragma Inline (Set_Has_Discriminants);
7666 pragma Inline (Set_Has_Dispatch_Table);
7667 pragma Inline (Set_Has_Enumeration_Rep_Clause);
7668 pragma Inline (Set_Has_Exit);
7669 pragma Inline (Set_Has_External_Tag_Rep_Clause);
7670 pragma Inline (Set_Has_Fully_Qualified_Name);
7671 pragma Inline (Set_Has_Gigi_Rep_Item);
7672 pragma Inline (Set_Has_Homonym);
7673 pragma Inline (Set_Has_Inheritable_Invariants);
7674 pragma Inline (Set_Has_Initial_Value);
7675 pragma Inline (Set_Has_Invariants);
7676 pragma Inline (Set_Has_Machine_Radix_Clause);
7677 pragma Inline (Set_Has_Master_Entity);
7678 pragma Inline (Set_Has_Missing_Return);
7679 pragma Inline (Set_Has_Nested_Block_With_Handler);
7680 pragma Inline (Set_Has_Forward_Instantiation);
7681 pragma Inline (Set_Has_Non_Standard_Rep);
7682 pragma Inline (Set_Has_Object_Size_Clause);
7683 pragma Inline (Set_Has_Per_Object_Constraint);
7684 pragma Inline (Set_Has_Persistent_BSS);
7685 pragma Inline (Set_Has_Postconditions);
7686 pragma Inline (Set_Has_Pragma_Controlled);
7687 pragma Inline (Set_Has_Pragma_Elaborate_Body);
7688 pragma Inline (Set_Has_Pragma_Inline);
7689 pragma Inline (Set_Has_Pragma_Inline_Always);
7690 pragma Inline (Set_Has_Pragma_Ordered);
7691 pragma Inline (Set_Has_Pragma_Pack);
7692 pragma Inline (Set_Has_Pragma_Preelab_Init);
7693 pragma Inline (Set_Has_Pragma_Pure);
7694 pragma Inline (Set_Has_Pragma_Pure_Function);
7695 pragma Inline (Set_Has_Pragma_Thread_Local_Storage);
7696 pragma Inline (Set_Has_Pragma_Unmodified);
7697 pragma Inline (Set_Has_Pragma_Unreferenced);
7698 pragma Inline (Set_Has_Pragma_Unreferenced_Objects);
7699 pragma Inline (Set_Has_Predicates);
7700 pragma Inline (Set_Has_Primitive_Operations);
7701 pragma Inline (Set_Has_Private_Declaration);
7702 pragma Inline (Set_Has_Qualified_Name);
7703 pragma Inline (Set_Has_RACW);
7704 pragma Inline (Set_Has_Record_Rep_Clause);
7705 pragma Inline (Set_Has_Recursive_Call);
7706 pragma Inline (Set_Has_Size_Clause);
7707 pragma Inline (Set_Has_Small_Clause);
7708 pragma Inline (Set_Has_Specified_Layout);
7709 pragma Inline (Set_Has_Specified_Stream_Input);
7710 pragma Inline (Set_Has_Specified_Stream_Output);
7711 pragma Inline (Set_Has_Specified_Stream_Read);
7712 pragma Inline (Set_Has_Specified_Stream_Write);
7713 pragma Inline (Set_Has_Static_Discriminants);
7714 pragma Inline (Set_Has_Storage_Size_Clause);
7715 pragma Inline (Set_Has_Stream_Size_Clause);
7716 pragma Inline (Set_Has_Subprogram_Descriptor);
7717 pragma Inline (Set_Has_Task);
7718 pragma Inline (Set_Has_Thunks);
7719 pragma Inline (Set_Has_Unchecked_Union);
7720 pragma Inline (Set_Has_Unknown_Discriminants);
7721 pragma Inline (Set_Has_Up_Level_Access);
7722 pragma Inline (Set_Has_Volatile_Components);
7723 pragma Inline (Set_Has_Xref_Entry);
7724 pragma Inline (Set_Hiding_Loop_Variable);
7725 pragma Inline (Set_Homonym);
7726 pragma Inline (Set_Interfaces);
7727 pragma Inline (Set_In_Package_Body);
7728 pragma Inline (Set_In_Private_Part);
7729 pragma Inline (Set_In_Use);
7730 pragma Inline (Set_Inner_Instances);
7731 pragma Inline (Set_Interface_Alias);
7732 pragma Inline (Set_Interface_Name);
7733 pragma Inline (Set_Is_AST_Entry);
7734 pragma Inline (Set_Is_Abstract_Subprogram);
7735 pragma Inline (Set_Is_Abstract_Type);
7736 pragma Inline (Set_Is_Access_Constant);
7737 pragma Inline (Set_Is_Ada_2005_Only);
7738 pragma Inline (Set_Is_Ada_2012_Only);
7739 pragma Inline (Set_Is_Aliased);
7740 pragma Inline (Set_Is_Asynchronous);
7741 pragma Inline (Set_Is_Atomic);
7742 pragma Inline (Set_Is_Bit_Packed_Array);
7743 pragma Inline (Set_Is_CPP_Class);
7744 pragma Inline (Set_Is_Called);
7745 pragma Inline (Set_Is_Character_Type);
7746 pragma Inline (Set_Is_Child_Unit);
7747 pragma Inline (Set_Is_Class_Wide_Equivalent_Type);
7748 pragma Inline (Set_Is_Compilation_Unit);
7749 pragma Inline (Set_Is_Completely_Hidden);
7750 pragma Inline (Set_Is_Concurrent_Record_Type);
7751 pragma Inline (Set_Is_Constr_Subt_For_U_Nominal);
7752 pragma Inline (Set_Is_Constr_Subt_For_UN_Aliased);
7753 pragma Inline (Set_Is_Constrained);
7754 pragma Inline (Set_Is_Constructor);
7755 pragma Inline (Set_Is_Controlled);
7756 pragma Inline (Set_Is_Controlling_Formal);
7757 pragma Inline (Set_Is_Descendent_Of_Address);
7758 pragma Inline (Set_Is_Discrim_SO_Function);
7759 pragma Inline (Set_Is_Dispatch_Table_Entity);
7760 pragma Inline (Set_Is_Dispatching_Operation);
7761 pragma Inline (Set_Is_Eliminated);
7762 pragma Inline (Set_Is_Entry_Formal);
7763 pragma Inline (Set_Is_Exported);
7764 pragma Inline (Set_Is_First_Subtype);
7765 pragma Inline (Set_Is_For_Access_Subtype);
7766 pragma Inline (Set_Is_Formal_Subprogram);
7767 pragma Inline (Set_Is_Frozen);
7768 pragma Inline (Set_Is_Generic_Actual_Type);
7769 pragma Inline (Set_Is_Generic_Instance);
7770 pragma Inline (Set_Is_Generic_Type);
7771 pragma Inline (Set_Is_Hidden);
7772 pragma Inline (Set_Is_Hidden_Open_Scope);
7773 pragma Inline (Set_Is_Immediately_Visible);
7774 pragma Inline (Set_Is_Imported);
7775 pragma Inline (Set_Is_Inlined);
7776 pragma Inline (Set_Is_Interface);
7777 pragma Inline (Set_Is_Instantiated);
7778 pragma Inline (Set_Is_Internal);
7779 pragma Inline (Set_Is_Interrupt_Handler);
7780 pragma Inline (Set_Is_Intrinsic_Subprogram);
7781 pragma Inline (Set_Is_Itype);
7782 pragma Inline (Set_Is_Known_Non_Null);
7783 pragma Inline (Set_Is_Known_Null);
7784 pragma Inline (Set_Is_Known_Valid);
7785 pragma Inline (Set_Is_Limited_Composite);
7786 pragma Inline (Set_Is_Limited_Interface);
7787 pragma Inline (Set_Is_Limited_Record);
7788 pragma Inline (Set_Is_Local_Anonymous_Access);
7789 pragma Inline (Set_Is_Machine_Code_Subprogram);
7790 pragma Inline (Set_Is_Non_Static_Subtype);
7791 pragma Inline (Set_Is_Null_Init_Proc);
7792 pragma Inline (Set_Is_Obsolescent);
7793 pragma Inline (Set_Is_Only_Out_Parameter);
7794 pragma Inline (Set_Is_Optional_Parameter);
7795 pragma Inline (Set_Is_Overriding_Operation);
7796 pragma Inline (Set_Is_Package_Body_Entity);
7797 pragma Inline (Set_Is_Packed);
7798 pragma Inline (Set_Is_Packed_Array_Type);
7799 pragma Inline (Set_Is_Potentially_Use_Visible);
7800 pragma Inline (Set_Is_Preelaborated);
7801 pragma Inline (Set_Is_Primitive);
7802 pragma Inline (Set_Is_Primitive_Wrapper);
7803 pragma Inline (Set_Is_Private_Composite);
7804 pragma Inline (Set_Is_Private_Descendant);
7805 pragma Inline (Set_Is_Private_Primitive);
7806 pragma Inline (Set_Is_Public);
7807 pragma Inline (Set_Is_Pure);
7808 pragma Inline (Set_Is_Pure_Unit_Access_Type);
7809 pragma Inline (Set_Is_RACW_Stub_Type);
7810 pragma Inline (Set_Is_Raised);
7811 pragma Inline (Set_Is_Remote_Call_Interface);
7812 pragma Inline (Set_Is_Remote_Types);
7813 pragma Inline (Set_Is_Renaming_Of_Object);
7814 pragma Inline (Set_Is_Return_Object);
7815 pragma Inline (Set_Is_Shared_Passive);
7816 pragma Inline (Set_Is_Statically_Allocated);
7817 pragma Inline (Set_Is_Tag);
7818 pragma Inline (Set_Is_Tagged_Type);
7819 pragma Inline (Set_Is_Thunk);
7820 pragma Inline (Set_Is_Trivial_Subprogram);
7821 pragma Inline (Set_Is_True_Constant);
7822 pragma Inline (Set_Is_Unchecked_Union);
7823 pragma Inline (Set_Is_Underlying_Record_View);
7824 pragma Inline (Set_Is_Unsigned_Type);
7825 pragma Inline (Set_Is_VMS_Exception);
7826 pragma Inline (Set_Is_Valued_Procedure);
7827 pragma Inline (Set_Is_Visible_Child_Unit);
7828 pragma Inline (Set_Is_Visible_Formal);
7829 pragma Inline (Set_Is_Volatile);
7830 pragma Inline (Set_Itype_Printed);
7831 pragma Inline (Set_Kill_Elaboration_Checks);
7832 pragma Inline (Set_Kill_Range_Checks);
7833 pragma Inline (Set_Kill_Tag_Checks);
7834 pragma Inline (Set_Known_To_Have_Preelab_Init);
7835 pragma Inline (Set_Last_Assignment);
7836 pragma Inline (Set_Last_Entity);
7837 pragma Inline (Set_Limited_View);
7838 pragma Inline (Set_Lit_Indexes);
7839 pragma Inline (Set_Lit_Strings);
7840 pragma Inline (Set_Low_Bound_Tested);
7841 pragma Inline (Set_Machine_Radix_10);
7842 pragma Inline (Set_Master_Id);
7843 pragma Inline (Set_Materialize_Entity);
7844 pragma Inline (Set_Mechanism);
7845 pragma Inline (Set_Modulus);
7846 pragma Inline (Set_Must_Be_On_Byte_Boundary);
7847 pragma Inline (Set_Must_Have_Preelab_Init);
7848 pragma Inline (Set_Needs_Debug_Info);
7849 pragma Inline (Set_Needs_No_Actuals);
7850 pragma Inline (Set_Never_Set_In_Source);
7851 pragma Inline (Set_Next_Inlined_Subprogram);
7852 pragma Inline (Set_No_Pool_Assigned);
7853 pragma Inline (Set_No_Return);
7854 pragma Inline (Set_No_Strict_Aliasing);
7855 pragma Inline (Set_Non_Binary_Modulus);
7856 pragma Inline (Set_Non_Limited_View);
7857 pragma Inline (Set_Nonzero_Is_True);
7858 pragma Inline (Set_Normalized_First_Bit);
7859 pragma Inline (Set_Normalized_Position);
7860 pragma Inline (Set_Normalized_Position_Max);
7861 pragma Inline (Set_OK_To_Reorder_Components);
7862 pragma Inline (Set_OK_To_Reference);
7863 pragma Inline (Set_OK_To_Rename);
7864 pragma Inline (Set_Optimize_Alignment_Space);
7865 pragma Inline (Set_Optimize_Alignment_Time);
7866 pragma Inline (Set_Original_Array_Type);
7867 pragma Inline (Set_Original_Record_Component);
7868 pragma Inline (Set_Overlays_Constant);
7869 pragma Inline (Set_Overridden_Operation);
7870 pragma Inline (Set_Package_Instantiation);
7871 pragma Inline (Set_Packed_Array_Type);
7872 pragma Inline (Set_Parent_Subtype);
7873 pragma Inline (Set_Postcondition_Proc);
7874 pragma Inline (Set_PPC_Wrapper);
7875 pragma Inline (Set_Prival);
7876 pragma Inline (Set_Prival_Link);
7877 pragma Inline (Set_Private_Dependents);
7878 pragma Inline (Set_Private_View);
7879 pragma Inline (Set_Protected_Body_Subprogram);
7880 pragma Inline (Set_Protected_Formal);
7881 pragma Inline (Set_Protection_Object);
7882 pragma Inline (Set_RM_Size);
7883 pragma Inline (Set_Reachable);
7884 pragma Inline (Set_Referenced);
7885 pragma Inline (Set_Referenced_As_LHS);
7886 pragma Inline (Set_Referenced_As_Out_Parameter);
7887 pragma Inline (Set_Register_Exception_Call);
7888 pragma Inline (Set_Related_Array_Object);
7889 pragma Inline (Set_Related_Expression);
7890 pragma Inline (Set_Related_Instance);
7891 pragma Inline (Set_Related_Type);
7892 pragma Inline (Set_Renamed_Entity);
7893 pragma Inline (Set_Renamed_In_Spec);
7894 pragma Inline (Set_Renamed_Object);
7895 pragma Inline (Set_Renaming_Map);
7896 pragma Inline (Set_Requires_Overriding);
7897 pragma Inline (Set_Return_Present);
7898 pragma Inline (Set_Return_Applies_To);
7899 pragma Inline (Set_Returns_By_Ref);
7900 pragma Inline (Set_Reverse_Bit_Order);
7901 pragma Inline (Set_Scalar_Range);
7902 pragma Inline (Set_Scale_Value);
7903 pragma Inline (Set_Scope_Depth_Value);
7904 pragma Inline (Set_Sec_Stack_Needed_For_Return);
7905 pragma Inline (Set_Shadow_Entities);
7906 pragma Inline (Set_Shared_Var_Procs_Instance);
7907 pragma Inline (Set_Size_Check_Code);
7908 pragma Inline (Set_Size_Depends_On_Discriminant);
7909 pragma Inline (Set_Size_Known_At_Compile_Time);
7910 pragma Inline (Set_Small_Value);
7911 pragma Inline (Set_Spec_Entity);
7912 pragma Inline (Set_Spec_PPC_List);
7913 pragma Inline (Set_Storage_Size_Variable);
7914 pragma Inline (Set_Static_Elaboration_Desired);
7915 pragma Inline (Set_Static_Initialization);
7916 pragma Inline (Set_Stored_Constraint);
7917 pragma Inline (Set_Strict_Alignment);
7918 pragma Inline (Set_String_Literal_Length);
7919 pragma Inline (Set_String_Literal_Low_Bound);
7920 pragma Inline (Set_Subprograms_For_Type);
7921 pragma Inline (Set_Suppress_Elaboration_Warnings);
7922 pragma Inline (Set_Suppress_Init_Proc);
7923 pragma Inline (Set_Suppress_Style_Checks);
7924 pragma Inline (Set_Suppress_Value_Tracking_On_Call);
7925 pragma Inline (Set_Task_Body_Procedure);
7926 pragma Inline (Set_Treat_As_Volatile);
7927 pragma Inline (Set_Underlying_Full_View);
7928 pragma Inline (Set_Underlying_Record_View);
7929 pragma Inline (Set_Universal_Aliasing);
7930 pragma Inline (Set_Unset_Reference);
7931 pragma Inline (Set_Used_As_Generic_Actual);
7932 pragma Inline (Set_Uses_Sec_Stack);
7933 pragma Inline (Set_Vax_Float);
7934 pragma Inline (Set_Warnings_Off);
7935 pragma Inline (Set_Warnings_Off_Used);
7936 pragma Inline (Set_Warnings_Off_Used_Unmodified);
7937 pragma Inline (Set_Warnings_Off_Used_Unreferenced);
7938 pragma Inline (Set_Was_Hidden);
7939 pragma Inline (Set_Wrapped_Entity);
7941 -- END XEINFO INLINES
7943 -- The following Inline pragmas are *not* read by xeinfo when building
7944 -- the C version of this interface automatically (so the C version will
7945 -- end up making out of line calls). The pragma scan in xeinfo will be
7946 -- terminated on encountering the END XEINFO INLINES line. We inline
7947 -- things here which are small, but not of the canonical attribute
7948 -- access/set format that can be handled by xeinfo.
7950 pragma Inline (Is_Package_Or_Generic_Package);
7951 pragma Inline (Is_Volatile);
7952 pragma Inline (Is_Wrapper_Package);
7953 pragma Inline (Known_RM_Size);
7954 pragma Inline (Known_Static_Component_Bit_Offset);
7955 pragma Inline (Known_Static_RM_Size);
7956 pragma Inline (Scope_Depth);
7957 pragma Inline (Scope_Depth_Set);
7958 pragma Inline (Unknown_RM_Size);