gcc/ada/sem_prag.ads

   1 ------------------------------------------------------------------------------
   2 --                                                                          --
   3 --                         GNAT COMPILER COMPONENTS                         --
   4 --                                                                          --
   5 --                             S E M _ P R A G                              --
   6 --                                                                          --
   7 --                                 S p e c                                  --
   8 --                                                                          --
   9 --          Copyright (C) 1992-2013, Free Software Foundation, Inc.         --
  10 --                                                                          --
  11 -- GNAT is free software;  you can  redistribute it  and/or modify it under --
  12 -- terms of the  GNU General Public License as published  by the Free Soft- --
  13 -- ware  Foundation;  either version 3,  or (at your option) any later ver- --
  14 -- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
  15 -- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
  16 -- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
  17 -- for  more details.  You should have  received  a copy of the GNU General --
  18 -- Public License  distributed with GNAT; see file COPYING3.  If not, go to --
  19 -- http://www.gnu.org/licenses for a complete copy of the license.          --
  20 --                                                                          --
  21 -- GNAT was originally developed  by the GNAT team at  New York University. --
  22 -- Extensive contributions were provided by Ada Core Technologies Inc.      --
  23 --                                                                          --
  24 ------------------------------------------------------------------------------
  25
  26 --  Pragma handling is isolated in a separate package
  27 --  (logically this processing belongs in chapter 4)
  28
  29 with Namet;  use Namet;
  30 with Snames; use Snames;
  31 with Types;  use Types;
  32
  33 package Sem_Prag is
  34
  35    --  The following table lists all the implementation-defined pragmas that
  36    --  may apply to a body stub (no language defined pragmas apply). The table
  37    --  should be synchronized with Aspect_On_Body_Or_Stub_OK in unit Aspects if
  38    --  the pragmas below implement an aspect.
  39
  40    Pragma_On_Body_Or_Stub_OK : constant array (Pragma_Id) of Boolean :=
  41      (Pragma_Refined_Depends => True,
  42       Pragma_Refined_Global  => True,
  43       Pragma_Refined_Post    => True,
  44       Pragma_Refined_Pre     => True,
  45       Pragma_SPARK_Mode      => True,
  46       Pragma_Warnings        => True,
  47       others                 => False);
  48
  49    -----------------
  50    -- Subprograms --
  51    -----------------
  52
  53    procedure Analyze_Pragma (N : Node_Id);
  54    --  Analyze procedure for pragma reference node N
  55
  56    procedure Analyze_Contract_Cases_In_Decl_Part (N : Node_Id);
  57    --  Perform full analysis and expansion of delayed pragma Contract_Cases
  58
  59    procedure Analyze_Depends_In_Decl_Part (N : Node_Id);
  60    --  Perform full analysis of delayed pragma Depends
  61
  62    procedure Analyze_Global_In_Decl_Part (N : Node_Id);
  63    --  Perform full analysis of delayed pragma Global
  64
  65    procedure Analyze_Pre_Post_Condition_In_Decl_Part
  66      (Prag    : Node_Id;
  67       Subp_Id : Entity_Id);
  68    --  Perform preanalysis of a [refined] precondition or postcondition that
  69    --  appears on a subprogram declaration or body [stub]. Prag denotes the
  70    --  pragma, Subp_Id is the entity of the related subprogram. The preanalysis
  71    --  of the expression is done as "spec expression" (see section "Handling
  72    --  of Default and Per-Object Expressions in Sem).
  73
  74    procedure Analyze_Refined_Depends_In_Decl_Part (N : Node_Id);
  75    --  Preform full analysis of delayed pragma Refined_Depends
  76
  77    procedure Analyze_Refined_Global_In_Decl_Part (N : Node_Id);
  78    --  Perform full analysis of delayed pragma Refined_Global
  79
  80    procedure Analyze_Test_Case_In_Decl_Part (N : Node_Id; S : Entity_Id);
  81    --  Perform preanalysis of pragma Test_Case that applies to a subprogram
  82    --  declaration. Parameter N denotes the pragma, S is the entity of the
  83    --  related subprogram. The preanalysis of the expression is done as "spec
  84    --  expression" (see section "Handling of Default and Per-Object Expressions
  85    --  in Sem).
  86
  87    procedure Check_Applicable_Policy (N : Node_Id);
  88    --  N is either an N_Aspect or an N_Pragma node. There are two cases. If
  89    --  the name of the aspect or pragma is not one of those recognized as
  90    --  an assertion kind by an Assertion_Policy pragma, then the call has
  91    --  no effect. Note that in the case of a pragma derived from an aspect,
  92    --  the name we use for the purpose of this procedure is the aspect name,
  93    --  which may be different from the pragma name (e.g. Precondition for
  94    --  Pre aspect). In addition, 'Class aspects are recognized (and the
  95    --  corresponding special names used in the processing).
  96    --
  97    --  If the name is a valid assertion kind name, then the Check_Policy pragma
  98    --  chain is checked for a matching entry (or for an Assertion entry which
  99    --  matches all possibilities). If a matching entry is found then the policy
 100    --  is checked. If it is On or Check, then the Is_Checked flag is set in
 101    --  the aspect or pragma node. If it is Off, Ignore, or Disable, then the
 102    --  Is_Ignored flag is set in the aspect or pragma node. Additionally for
 103    --  policy Disable, the Is_Disabled flag is set.
 104    --
 105    --  If no matching Check_Policy pragma is found then the effect depends on
 106    --  whether -gnata was used, if so, then the call has no effect, otherwise
 107    --  Is_Ignored (but not Is_Disabled) is set True.
 108
 109    function Delay_Config_Pragma_Analyze (N : Node_Id) return Boolean;
 110    --  N is a pragma appearing in a configuration pragma file. Most such
 111    --  pragmas are analyzed when the file is read, before parsing and analyzing
 112    --  the main unit. However, the analysis of certain pragmas results in
 113    --  adding information to the compiled main unit, and this cannot be done
 114    --  till the main unit is processed. Such pragmas return True from this
 115    --  function and in Frontend pragmas where Delay_Config_Pragma_Analyze is
 116    --  True have their analysis delayed until after the main program is parsed
 117    --  and analyzed.
 118
 119    function Get_SPARK_Mode_Id (N : Node_Id) return SPARK_Mode_Id;
 120    --  Given a pragma SPARK_Mode node, return the corresponding mode id
 121
 122    procedure Initialize;
 123    --  Initializes data structures used for pragma processing. Must be called
 124    --  before analyzing each new main source program.
 125
 126    function Is_Config_Static_String (Arg : Node_Id) return Boolean;
 127    --  This is called for a configuration pragma that requires either string
 128    --  literal or a concatenation of string literals. We cannot use normal
 129    --  static string processing because it is too early in the case of the
 130    --  pragma appearing in a configuration pragmas file. If Arg is of an
 131    --  appropriate form, then this call obtains the string (doing any necessary
 132    --  concatenations) and places it in Name_Buffer, setting Name_Len to its
 133    --  length, and then returns True. If it is not of the correct form, then an
 134    --  appropriate error message is posted, and False is returned.
 135
 136    function Is_Elaboration_SPARK_Mode (N : Node_Id) return Boolean;
 137    --  Determine whether pragma SPARK_Mode appears in the statement part of a
 138    --  package body.
 139
 140    function Is_Non_Significant_Pragma_Reference (N : Node_Id) return Boolean;
 141    --  The node N is a node for an entity and the issue is whether the
 142    --  occurrence is a reference for the purposes of giving warnings about
 143    --  unreferenced variables. This function returns True if the reference is
 144    --  not a reference from this point of view (e.g. the occurrence in a pragma
 145    --  Pack) and False if it is a real reference (e.g. the occurrence in a
 146    --  pragma Export);
 147
 148    function Is_Pragma_String_Literal (Par : Node_Id) return Boolean;
 149    --  Given an N_Pragma_Argument_Association node, Par, which has the form of
 150    --  an operator symbol, determines whether or not it should be treated as an
 151    --  string literal. This is called by Sem_Ch6.Analyze_Operator_Symbol. If
 152    --  True is returned, the argument is converted to a string literal. If
 153    --  False is returned, then the argument is treated as an entity reference
 154    --  to the operator.
 155
 156    function Is_Private_SPARK_Mode (N : Node_Id) return Boolean;
 157    --  Determine whether pragma SPARK_Mode appears in the private part of a
 158    --  package.
 159
 160    function Is_Valid_Assertion_Kind (Nam : Name_Id) return Boolean;
 161    --  Returns True if Nam is one of the names recognized as a valid assertion
 162    --  kind by the Assertion_Policy pragma. Note that the 'Class cases are
 163    --  represented by the corresponding special names Name_uPre, Name_uPost,
 164    --  Name_uInviarnat, and Name_uType_Invariant (_Pre, _Post, _Invariant,
 165    --  and _Type_Invariant).
 166
 167    procedure Make_Aspect_For_PPC_In_Gen_Sub_Decl (Decl : Node_Id);
 168    --  This routine makes aspects from precondition or postcondition pragmas
 169    --  that appear within a generic subprogram declaration. Decl is the generic
 170    --  subprogram declaration node. Note that the aspects are attached to the
 171    --  generic copy and also to the orginal tree.
 172
 173    procedure Process_Compilation_Unit_Pragmas (N : Node_Id);
 174    --  Called at the start of processing compilation unit N to deal with any
 175    --  special issues regarding pragmas. In particular, we have to deal with
 176    --  Suppress_All at this stage, since it can appear after the unit instead
 177    --  of before (actually we allow it to appear anywhere).
 178
 179    procedure Relocate_Pragmas_To_Body
 180      (Subp_Body   : Node_Id;
 181       Target_Body : Node_Id := Empty);
 182    --  Resocate all pragmas that follow and apply to subprogram body Subp_Body
 183    --  to its own declaration list. Candidate pragmas are classified in table
 184    --  Pragma_On_Body_Or_Stub_OK. If Target_Body is set, the pragma are moved
 185    --  to the declarations of Target_Body. This formal should be set when
 186    --  dealing with subprogram body stubs or expression functions.
 187
 188    procedure Set_Encoded_Interface_Name (E : Entity_Id; S : Node_Id);
 189    --  This routine is used to set an encoded interface name. The node S is an
 190    --  N_String_Literal node for the external name to be set, and E is an
 191    --  entity whose Interface_Name field is to be set. In the normal case where
 192    --  S contains a name that is a valid C identifier, then S is simply set as
 193    --  the value of the Interface_Name. Otherwise it is encoded. See the body
 194    --  for details of the encoding. This encoding is only done on VMS systems,
 195    --  since it seems pretty silly, but is needed to pass some dubious tests in
 196    --  the test suite.
 197
 198 end Sem_Prag;