1 /* Subroutines for insn-output.c for MIPS
2 Contributed by A. Lichnewsky, lich@inria.inria.fr.
3 Changes by Michael Meissner, meissner@osf.org.
4 Copyright (C) 1989, 1990, 1991 Free Software Foundation, Inc.
6 This file is part of GNU CC.
8 GNU CC is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 GNU CC is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GNU CC; see the file COPYING. If not, write to
20 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
25 #include "hard-reg-set.h"
27 #include "insn-config.h"
28 #include "conditions.h"
29 #include "insn-flags.h"
30 #include "insn-attr.h"
31 #include "insn-codes.h"
35 #undef MAX /* sys/param.h may also define these */
40 #include <sys/types.h>
53 #if defined(USG) || defined(NO_STAB_H)
54 #include "gstab.h" /* If doing DBX on sysV, use our own stab.h. */
56 #include <stab.h> /* On BSD, use the system's stab.h. */
60 #define STAB_CODE_TYPE enum __stab_debug_code
62 #define STAB_CODE_TYPE int
67 extern char *getenv ();
68 extern char *mktemp ();
70 extern rtx
adj_offsettable_operand ();
71 extern rtx
copy_to_reg ();
74 extern tree
lookup_name ();
75 extern void pfatal_with_name ();
76 extern void warning ();
78 extern tree current_function_decl
;
79 extern FILE *asm_out_file
;
81 /* Enumeration for all of the relational tests, so that we can build
82 arrays indexed by the test type, and not worry about the order
99 /* Global variables for machine-dependent things. */
101 /* Threshold for data being put into the small data/bss area, instead
102 of the normal data area (references to the small data/bss area take
103 1 instruction, and use the global pointer, references to the normal
104 data area takes 2 instructions). */
105 int mips_section_threshold
= -1;
107 /* Count the number of .file directives, so that .loc is up to date. */
108 int num_source_filenames
= 0;
110 /* Count the number of sdb related labels are generated (to find block
111 start and end boundaries). */
112 int sdb_label_count
= 0;
114 /* Next label # for each statment for Silicon Graphics IRIS systems. */
117 /* Non-zero if inside of a function, because the stupid MIPS asm can't
118 handle .files inside of functions. */
119 int inside_function
= 0;
121 /* Files to separate the text and the data output, so that all of the data
122 can be emitted before the text, which will mean that the assembler will
123 generate smaller code, based on the global pointer. */
124 FILE *asm_out_data_file
;
125 FILE *asm_out_text_file
;
127 /* Linked list of all externals that are to be emitted when optimizing
128 for the global pointer if they haven't been declared by the end of
129 the program with an appropriate .comm or initialization. */
132 struct extern_list
*next
; /* next external */
133 char *name
; /* name of the external */
134 int size
; /* size in bytes */
137 /* Name of the file containing the current function. */
138 char *current_function_file
= "";
140 /* Warning given that Mips ECOFF can't support changing files
141 within a function. */
142 int file_in_function_warning
= FALSE
;
144 /* Whether to suppress issuing .loc's because the user attempted
145 to change the filename within a function. */
146 int ignore_line_number
= FALSE
;
148 /* Number of nested .set noreorder, noat, nomacro, and volatile requests. */
154 /* The next branch instruction is a branch likely, not branch normal. */
155 int mips_branch_likely
;
157 /* Count of delay slots and how many are filled. */
158 int dslots_load_total
;
159 int dslots_load_filled
;
160 int dslots_jump_total
;
161 int dslots_jump_filled
;
163 /* # of nops needed by previous insn */
164 int dslots_number_nops
;
166 /* Number of 1/2/3 word references to data items (ie, not jal's). */
169 /* registers to check for load delay */
170 rtx mips_load_reg
, mips_load_reg2
, mips_load_reg3
, mips_load_reg4
;
172 /* Cached operands, and operator to compare for use in set/branch on
176 /* what type of branch to use */
177 enum cmp_type branch_type
;
179 /* Number of previously seen half-pic pointers and references. */
180 static int prev_half_pic_ptrs
= 0;
181 static int prev_half_pic_refs
= 0;
183 /* which cpu are we scheduling for */
184 enum processor_type mips_cpu
;
186 /* which instruction set architecture to use. */
189 /* Strings to hold which cpu and instruction set architecture to use. */
190 char *mips_cpu_string
; /* for -mcpu=<xxx> */
191 char *mips_isa_string
; /* for -mips{1,2,3} */
193 /* Array to RTX class classification. At present, we care about
194 whether the operator is an add-type operator, or a divide/modulus,
195 and if divide/modulus, whether it is unsigned. This is for the
197 char mips_rtx_classify
[NUM_RTX_CODE
];
199 /* Array giving truth value on whether or not a given hard register
200 can support a given mode. */
201 char mips_hard_regno_mode_ok
[(int)MAX_MACHINE_MODE
][FIRST_PSEUDO_REGISTER
];
203 /* Current frame information calculated by compute_frame_size. */
204 struct mips_frame_info current_frame_info
;
206 /* Zero structure to initialize current_frame_info. */
207 struct mips_frame_info zero_frame_info
;
209 /* Temporary filename used to buffer .text until end of program
211 static char *temp_filename
;
213 /* List of all MIPS punctuation characters used by print_operand. */
214 char mips_print_operand_punct
[256];
216 /* Map GCC register number to debugger register number. */
217 int mips_dbx_regno
[FIRST_PSEUDO_REGISTER
];
219 /* Buffer to use to enclose a load/store operation with %{ %} to
220 turn on .set volatile. */
221 static char volatile_buffer
[60];
223 /* Hardware names for the registers. If -mrnames is used, this
224 will be overwritten with mips_sw_reg_names. */
226 char mips_reg_names
[][8] =
228 "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7",
229 "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15",
230 "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23",
231 "$24", "$25", "$26", "$27", "$28", "$sp", "$fp", "$31",
232 "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7",
233 "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15",
234 "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",
235 "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31",
239 /* Mips software names for the registers, used to overwrite the
240 mips_reg_names array. */
242 char mips_sw_reg_names
[][8] =
244 "$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
245 "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
246 "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
247 "t8", "t9", "k0", "k1", "gp", "sp", "$fp", "ra",
248 "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7",
249 "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15",
250 "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",
251 "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31",
255 /* Map hard register number to register class */
256 enum reg_class mips_regno_to_class
[] =
258 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
259 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
260 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
261 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
262 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
263 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
264 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
265 GR_REGS
, GR_REGS
, GR_REGS
, GR_REGS
,
266 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
267 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
268 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
269 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
270 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
271 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
272 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
273 FP_REGS
, FP_REGS
, FP_REGS
, FP_REGS
,
274 HI_REG
, LO_REG
, ST_REGS
277 /* Map register constraint character to register class. */
278 enum reg_class mips_char_to_class
[256] =
280 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
281 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
282 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
283 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
284 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
285 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
286 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
287 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
288 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
289 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
290 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
291 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
292 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
293 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
294 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
295 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
296 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
297 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
298 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
299 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
300 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
301 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
302 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
303 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
304 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
305 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
306 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
307 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
308 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
309 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
310 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
311 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
312 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
313 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
314 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
315 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
316 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
317 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
318 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
319 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
320 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
321 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
322 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
323 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
324 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
325 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
326 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
327 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
328 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
329 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
330 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
331 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
332 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
333 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
334 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
335 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
336 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
337 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
338 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
339 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
340 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
341 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
342 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
343 NO_REGS
, NO_REGS
, NO_REGS
, NO_REGS
,
347 /* Return truth value of whether OP can be used as an operands
348 where a register or 16 bit unsigned integer is needed. */
351 uns_arith_operand (op
, mode
)
353 enum machine_mode mode
;
355 if (GET_CODE (op
) == CONST_INT
&& SMALL_INT_UNSIGNED (op
))
358 return register_operand (op
, mode
);
361 /* Return truth value of whether OP can be used as an operands
362 where a 16 bit integer is needed */
365 arith_operand (op
, mode
)
367 enum machine_mode mode
;
369 if (GET_CODE (op
) == CONST_INT
&& SMALL_INT (op
))
372 return register_operand (op
, mode
);
375 /* Return truth value of whether OP can be used as an operand in a two
376 address arithmetic insn (such as set 123456,%o4) of mode MODE. */
379 arith32_operand (op
, mode
)
381 enum machine_mode mode
;
383 if (GET_CODE (op
) == CONST_INT
)
386 return register_operand (op
, mode
);
389 /* Return truth value of whether OP is a integer which fits in 16 bits */
394 enum machine_mode mode
;
396 return (GET_CODE (op
) == CONST_INT
&& SMALL_INT (op
));
399 /* Return truth value of whether OP is an integer which is too big to
400 be loaded with one instruction. */
405 enum machine_mode mode
;
409 if (GET_CODE (op
) != CONST_INT
)
413 if ((value
& ~0x0000ffff) == 0) /* ior reg,$r0,value */
416 if (((unsigned long)(value
+ 32768)) <= 32767) /* subu reg,$r0,value */
419 if ((value
& 0xffff0000) == value
) /* lui reg,value>>16 */
425 /* Return truth value of whether OP is a register or the constant 0. */
428 reg_or_0_operand (op
, mode
)
430 enum machine_mode mode
;
432 switch (GET_CODE (op
))
438 return (INTVAL (op
) == 0);
441 if (CONST_DOUBLE_HIGH (op
) != 0 || CONST_DOUBLE_LOW (op
) != 0)
448 return register_operand (op
, mode
);
454 /* Return truth value of whether OP is one of the special multiply/divide
455 registers (hi, lo). */
458 md_register_operand (op
, mode
)
460 enum machine_mode mode
;
462 return (GET_MODE_CLASS (mode
) == MODE_INT
463 && GET_CODE (op
) == REG
464 && MD_REG_P (REGNO (op
)));
467 /* Return truth value of whether OP is the FP status register. */
470 fpsw_register_operand (op
, mode
)
472 enum machine_mode mode
;
474 return (GET_CODE (op
) == REG
&& ST_REG_P (REGNO (op
)));
477 /* Return truth value if a CONST_DOUBLE is ok to be a legitimate constant. */
480 mips_const_double_ok (op
, mode
)
482 enum machine_mode mode
;
484 if (GET_CODE (op
) != CONST_DOUBLE
)
490 if (mode
!= SFmode
&& mode
!= DFmode
)
493 if (CONST_DOUBLE_HIGH (op
) == 0 && CONST_DOUBLE_LOW (op
) == 0)
496 #if HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
497 if (TARGET_MIPS_AS
) /* gas doesn't like li.d/li.s yet */
499 union { double d
; int i
[2]; } u
;
502 u
.i
[0] = CONST_DOUBLE_LOW (op
);
503 u
.i
[1] = CONST_DOUBLE_HIGH (op
);
507 return FALSE
; /* NAN */
512 /* Rather than trying to get the accuracy down to the last bit,
513 just use approximate ranges. */
515 if (mode
== DFmode
&& d
> 1.0e-300 && d
< 1.0e300
)
518 if (mode
== SFmode
&& d
> 1.0e-38 && d
< 1.0e+38)
526 /* Return truth value if a memory operand fits in a single instruction
527 (ie, register + small offset). */
530 simple_memory_operand (op
, mode
)
532 enum machine_mode mode
;
534 rtx addr
, plus0
, plus1
;
536 /* Eliminate non-memory operations */
537 if (GET_CODE (op
) != MEM
)
540 /* dword operations really put out 2 instructions, so eliminate them. */
541 if (GET_MODE_SIZE (GET_MODE (op
)) > (HAVE_64BIT_P () ? 8 : 4))
544 /* Decode the address now. */
546 switch (GET_CODE (addr
))
555 return SMALL_INT (op
);
558 plus0
= XEXP (addr
, 0);
559 plus1
= XEXP (addr
, 1);
560 if (GET_CODE (plus0
) == REG
561 && GET_CODE (plus1
) == CONST_INT
562 && SMALL_INT (plus1
))
565 else if (GET_CODE (plus1
) == REG
566 && GET_CODE (plus0
) == CONST_INT
567 && SMALL_INT (plus0
))
574 /* We used to allow small symbol refs here (ie, stuff in .sdata
575 or .sbss), but this causes some bugs in G++. Also, it won't
576 interfere if the MIPS linker rewrites the store instruction
577 because the function is PIC. */
579 case LABEL_REF
: /* never gp relative */
583 /* If -G 0, we can never have a GP relative memory operation.
584 Also, save some time if not optimizing. */
585 if (mips_section_threshold
== 0 || !optimize
|| !TARGET_GP_OPT
)
589 rtx offset
= const0_rtx
;
590 addr
= eliminate_constant_term (addr
, &offset
);
591 if (GET_CODE (op
) != SYMBOL_REF
)
594 /* let's be paranoid.... */
595 if (INTVAL (offset
) < 0 || INTVAL (offset
) > 0xffff)
601 return SYMBOL_REF_FLAG (addr
);
608 /* Return true if the code of this rtx pattern is EQ or NE. */
611 equality_op (op
, mode
)
613 enum machine_mode mode
;
615 if (mode
!= GET_MODE (op
))
618 return (classify_op (op
, mode
) & CLASS_EQUALITY_OP
) != 0;
621 /* Return true if the code is a relational operations (EQ, LE, etc.) */
626 enum machine_mode mode
;
628 if (mode
!= GET_MODE (op
))
631 return (classify_op (op
, mode
) & CLASS_CMP_OP
) != 0;
635 /* Genrecog does not take the type of match_operator into consideration,
636 and would complain about two patterns being the same if the same
637 function is used, so make it believe they are different. */
642 enum machine_mode mode
;
644 if (mode
!= GET_MODE (op
))
647 return (classify_op (op
, mode
) & CLASS_CMP_OP
) != 0;
650 /* Return true if the code is an unsigned relational operations (LEU, etc.) */
655 enum machine_mode mode
;
657 if (mode
!= GET_MODE (op
))
660 return (classify_op (op
, mode
) & CLASS_UNS_CMP_OP
) == CLASS_UNS_CMP_OP
;
663 /* Return true if the code is a relational operation FP can use. */
668 enum machine_mode mode
;
670 if (mode
!= GET_MODE (op
))
673 return (classify_op (op
, mode
) & CLASS_FCMP_OP
) != 0;
677 /* Return true if the operand is either the PC or a label_ref. */
680 pc_or_label_operand (op
, mode
)
682 enum machine_mode mode
;
687 if (GET_CODE (op
) == LABEL_REF
)
693 /* Test for a valid operand for a call instruction.
694 Don't allow the arg pointer register or virtual regs
695 since they may change into reg + const, which the patterns
699 call_insn_operand (op
, mode
)
701 enum machine_mode mode
;
703 if (GET_CODE (op
) == MEM
704 && (CONSTANT_ADDRESS_P (XEXP (op
, 0))
705 || (GET_CODE (XEXP (op
, 0)) == REG
706 && XEXP (op
, 0) != arg_pointer_rtx
707 && !(REGNO (XEXP (op
, 0)) >= FIRST_PSEUDO_REGISTER
708 && REGNO (XEXP (op
, 0)) <= LAST_VIRTUAL_REGISTER
))))
713 /* Return an operand string if the given instruction's delay slot or
714 wrap it in a .set noreorder section. This is for filling delay
715 slots on load type instructions under GAS, which does no reordering
716 on its own. For the MIPS assembler, all we do is update the filled
717 delay slot statistics.
719 We assume that operands[0] is the target register that is set.
721 In order to check the next insn, most of this functionality is moved
722 to FINAL_PRESCAN_INSN, and we just set the global variables that
726 mips_fill_delay_slot (ret
, type
, operands
, cur_insn
)
727 char *ret
; /* normal string to return */
728 enum delay_type type
; /* type of delay */
729 rtx operands
[]; /* operands to use */
730 rtx cur_insn
; /* current insn */
732 register rtx set_reg
;
733 register enum machine_mode mode
;
734 register rtx next_insn
= (cur_insn
) ? NEXT_INSN (cur_insn
) : (rtx
)0;
735 register int num_nops
;
737 if (type
== DELAY_LOAD
|| type
== DELAY_FCMP
)
740 else if (type
== DELAY_HILO
)
746 /* Make sure that we don't put nop's after labels. */
747 next_insn
= NEXT_INSN (cur_insn
);
748 while (next_insn
!= (rtx
)0 && GET_CODE (next_insn
) == NOTE
)
749 next_insn
= NEXT_INSN (next_insn
);
751 dslots_load_total
+= num_nops
;
752 if (TARGET_DEBUG_F_MODE
754 || type
== DELAY_NONE
755 || operands
== (rtx
*)0
756 || cur_insn
== (rtx
)0
757 || next_insn
== (rtx
)0
758 || GET_CODE (next_insn
) == CODE_LABEL
759 || (set_reg
= operands
[0]) == (rtx
)0)
761 dslots_number_nops
= 0;
762 mips_load_reg
= (rtx
)0;
763 mips_load_reg2
= (rtx
)0;
764 mips_load_reg3
= (rtx
)0;
765 mips_load_reg4
= (rtx
)0;
769 set_reg
= operands
[0];
770 if (set_reg
== (rtx
)0)
773 while (GET_CODE (set_reg
) == SUBREG
)
774 set_reg
= SUBREG_REG (set_reg
);
776 mode
= GET_MODE (set_reg
);
777 dslots_number_nops
= num_nops
;
778 mips_load_reg
= set_reg
;
779 mips_load_reg2
= (mode
== DImode
|| mode
== DFmode
)
780 ? gen_rtx (REG
, SImode
, REGNO (set_reg
) + 1)
783 if (type
== DELAY_HILO
)
785 mips_load_reg3
= gen_rtx (REG
, SImode
, MD_REG_FIRST
);
786 mips_load_reg4
= gen_rtx (REG
, SImode
, MD_REG_FIRST
+1);
794 if (TARGET_GAS
&& set_noreorder
++ == 0)
795 fputs ("\t.set\tnoreorder\n", asm_out_file
);
801 /* Determine whether a memory reference takes one (based off of the GP pointer),
802 two (normal), or three (label + reg) instructions, and bump the appropriate
803 counter for -mstats. */
806 mips_count_memory_refs (op
, num
)
812 rtx addr
, plus0
, plus1
;
813 enum rtx_code code0
, code1
;
816 if (TARGET_DEBUG_B_MODE
)
818 fprintf (stderr
, "\n========== mips_count_memory_refs:\n");
822 /* Skip MEM if passed, otherwise handle movsi of address. */
823 addr
= (GET_CODE (op
) != MEM
) ? op
: XEXP (op
, 0);
825 /* Loop, going through the address RTL */
829 switch (GET_CODE (addr
))
839 plus0
= XEXP (addr
, 0);
840 plus1
= XEXP (addr
, 1);
841 code0
= GET_CODE (plus0
);
842 code1
= GET_CODE (plus1
);
852 if (code0
== CONST_INT
)
867 if (code1
== CONST_INT
)
874 if (code0
== SYMBOL_REF
|| code0
== LABEL_REF
|| code0
== CONST
)
881 if (code1
== SYMBOL_REF
|| code1
== LABEL_REF
|| code1
== CONST
)
891 n_words
= 2; /* always 2 words */
895 addr
= XEXP (addr
, 0);
900 n_words
= SYMBOL_REF_FLAG (addr
) ? 1 : 2;
909 n_words
+= additional
;
913 num_refs
[n_words
-1] += num
;
917 /* Return the appropriate instructions to move one operand to another. */
920 mips_move_1word (operands
, insn
, unsignedp
)
926 rtx op0
= operands
[0];
927 rtx op1
= operands
[1];
928 enum rtx_code code0
= GET_CODE (op0
);
929 enum rtx_code code1
= GET_CODE (op1
);
930 enum machine_mode mode
= GET_MODE (op0
);
931 int subreg_word0
= 0;
932 int subreg_word1
= 0;
933 enum delay_type delay
= DELAY_NONE
;
935 while (code0
== SUBREG
)
937 subreg_word0
+= SUBREG_WORD (op0
);
938 op0
= SUBREG_REG (op0
);
939 code0
= GET_CODE (op0
);
942 while (code1
== SUBREG
)
944 subreg_word1
+= SUBREG_WORD (op1
);
945 op1
= SUBREG_REG (op1
);
946 code1
= GET_CODE (op1
);
951 int regno0
= REGNO (op0
) + subreg_word0
;
955 int regno1
= REGNO (op1
) + subreg_word1
;
957 /* Just in case, don't do anything for assigning a register
958 to itself, unless we are filling a delay slot. */
959 if (regno0
== regno1
&& set_nomacro
== 0)
962 else if (GP_REG_P (regno0
))
964 if (GP_REG_P (regno1
))
967 else if (MD_REG_P (regno1
))
976 if (FP_REG_P (regno1
))
979 else if (regno1
== FPSW_REGNUM
)
980 ret
= "cfc1\t%0,$31";
984 else if (FP_REG_P (regno0
))
986 if (GP_REG_P (regno1
))
992 if (FP_REG_P (regno1
))
993 ret
= "mov.s\t%0,%1";
996 else if (MD_REG_P (regno0
))
998 if (GP_REG_P (regno1
))
1005 else if (regno0
== FPSW_REGNUM
)
1007 if (GP_REG_P (regno1
))
1010 ret
= "ctc1\t%0,$31";
1015 else if (code1
== MEM
)
1020 mips_count_memory_refs (op1
, 1);
1022 if (GP_REG_P (regno0
))
1024 /* For loads, use the mode of the memory item, instead of the
1025 target, so zero/sign extend can use this code as well. */
1026 switch (GET_MODE (op1
))
1029 case SFmode
: ret
= "lw\t%0,%1"; break;
1030 case SImode
: ret
= "lw\t%0,%1"; break;
1031 case HImode
: ret
= (unsignedp
) ? "lhu\t%0,%1" : "lh\t%0,%1"; break;
1032 case QImode
: ret
= (unsignedp
) ? "lbu\t%0,%1" : "lb\t%0,%1"; break;
1036 else if (FP_REG_P (regno0
) && (mode
== SImode
|| mode
== SFmode
))
1039 if (ret
!= (char *)0 && MEM_VOLATILE_P (op1
))
1041 int i
= strlen (ret
);
1042 if (i
> sizeof (volatile_buffer
) - sizeof ("%{%}"))
1045 sprintf (volatile_buffer
, "%%{%s%%}", ret
);
1046 ret
= volatile_buffer
;
1050 else if (code1
== CONST_INT
)
1052 if (INTVAL (op1
) == 0)
1054 if (GP_REG_P (regno0
))
1055 ret
= "move\t%0,%z1";
1057 else if (FP_REG_P (regno0
))
1060 ret
= "mtc1\t%z1,%0";
1064 else if (GP_REG_P (regno0
))
1065 ret
= (INTVAL (op1
) < 0) ? "li\t%0,%1\t\t\t# %X1" : "li\t%0,%X1\t\t# %1";
1068 else if (code1
== CONST_DOUBLE
&& mode
== SFmode
)
1070 if (CONST_DOUBLE_HIGH (op1
) == 0 && CONST_DOUBLE_LOW (op1
) == 0)
1072 if (GP_REG_P (regno0
))
1073 ret
= "move\t%0,%.";
1075 else if (FP_REG_P (regno0
))
1078 ret
= "mtc1\t%.,%0";
1085 ret
= "li.s\t%0,%1";
1089 else if (code1
== LABEL_REF
)
1092 mips_count_memory_refs (op1
, 1);
1097 else if (code1
== SYMBOL_REF
|| code1
== CONST
)
1099 if (HALF_PIC_P () && CONSTANT_P (op1
) && HALF_PIC_ADDRESS_P (op1
))
1101 rtx offset
= const0_rtx
;
1103 if (GET_CODE (op1
) == CONST
)
1104 op1
= eliminate_constant_term (XEXP (op1
, 0), &offset
);
1106 if (GET_CODE (op1
) == SYMBOL_REF
)
1108 operands
[2] = HALF_PIC_PTR (op1
);
1111 mips_count_memory_refs (operands
[2], 1);
1113 if (INTVAL (offset
) == 0)
1120 dslots_load_total
++;
1121 operands
[3] = offset
;
1122 ret
= (SMALL_INT (offset
))
1123 ? "lw\t%0,%2%#\n\tadd\t%0,%0,%3"
1124 : "lw\t%0,%2%#\n\t%[li\t%@,%3\n\tadd\t%0,%0,%@%]";
1131 mips_count_memory_refs (op1
, 1);
1137 else if (code1
== PLUS
)
1139 rtx add_op0
= XEXP (op1
, 0);
1140 rtx add_op1
= XEXP (op1
, 1);
1142 if (GET_CODE (XEXP (op1
, 1)) == REG
&& GET_CODE (XEXP (op1
, 0)) == CONST_INT
)
1144 add_op0
= XEXP (op1
, 1); /* reverse operands */
1145 add_op1
= XEXP (op1
, 0);
1148 operands
[2] = add_op0
;
1149 operands
[3] = add_op1
;
1150 ret
= "add%:\t%0,%2,%3";
1154 else if (code0
== MEM
)
1157 mips_count_memory_refs (op0
, 1);
1161 int regno1
= REGNO (op1
) + subreg_word1
;
1163 if (GP_REG_P (regno1
))
1168 case SFmode
: ret
= "sw\t%1,%0"; break;
1169 case SImode
: ret
= "sw\t%1,%0"; break;
1170 case HImode
: ret
= "sh\t%1,%0"; break;
1171 case QImode
: ret
= "sb\t%1,%0"; break;
1175 else if (FP_REG_P (regno1
) && (mode
== SImode
|| mode
== SFmode
))
1179 else if (code1
== CONST_INT
&& INTVAL (op1
) == 0)
1184 case SFmode
: ret
= "sw\t%z1,%0"; break;
1185 case SImode
: ret
= "sw\t%z1,%0"; break;
1186 case HImode
: ret
= "sh\t%z1,%0"; break;
1187 case QImode
: ret
= "sb\t%z1,%0"; break;
1191 else if (code1
== CONST_DOUBLE
&& CONST_DOUBLE_HIGH (op1
) == 0 && CONST_DOUBLE_LOW (op1
) == 0)
1196 case SFmode
: ret
= "sw\t%.,%0"; break;
1197 case SImode
: ret
= "sw\t%.,%0"; break;
1198 case HImode
: ret
= "sh\t%.,%0"; break;
1199 case QImode
: ret
= "sb\t%.,%0"; break;
1203 if (ret
!= (char *)0 && MEM_VOLATILE_P (op0
))
1205 int i
= strlen (ret
);
1206 if (i
> sizeof (volatile_buffer
) - sizeof ("%{%}"))
1209 sprintf (volatile_buffer
, "%%{%s%%}", ret
);
1210 ret
= volatile_buffer
;
1214 if (ret
== (char *)0)
1216 abort_with_insn (insn
, "Bad move");
1220 if (delay
!= DELAY_NONE
)
1221 return mips_fill_delay_slot (ret
, delay
, operands
, insn
);
1227 /* Return the appropriate instructions to move 2 words */
1230 mips_move_2words (operands
, insn
)
1235 rtx op0
= operands
[0];
1236 rtx op1
= operands
[1];
1237 enum rtx_code code0
= GET_CODE (operands
[0]);
1238 enum rtx_code code1
= GET_CODE (operands
[1]);
1239 int subreg_word0
= 0;
1240 int subreg_word1
= 0;
1241 enum delay_type delay
= DELAY_NONE
;
1243 while (code0
== SUBREG
)
1245 subreg_word0
+= SUBREG_WORD (op0
);
1246 op0
= SUBREG_REG (op0
);
1247 code0
= GET_CODE (op0
);
1250 while (code1
== SUBREG
)
1252 subreg_word1
+= SUBREG_WORD (op1
);
1253 op1
= SUBREG_REG (op1
);
1254 code1
= GET_CODE (op1
);
1259 int regno0
= REGNO (op0
) + subreg_word0
;
1263 int regno1
= REGNO (op1
) + subreg_word1
;
1265 /* Just in case, don't do anything for assigning a register
1266 to itself, unless we are filling a delay slot. */
1267 if (regno0
== regno1
&& set_nomacro
== 0)
1270 else if (FP_REG_P (regno0
))
1272 if (FP_REG_P (regno1
))
1273 ret
= "mov.d\t%0,%1";
1278 ret
= (TARGET_FLOAT64
)
1280 : "mtc1\t%L1,%0\n\tmtc1\t%M1,%D0";
1284 else if (FP_REG_P (regno1
))
1287 ret
= (TARGET_FLOAT64
)
1289 : "mfc1\t%L0,%1\n\tmfc1\t%M0,%D1";
1292 else if (MD_REG_P (regno0
) && GP_REG_P (regno1
))
1295 ret
= "mthi\t%M1\n\tmtlo\t%L1";
1298 else if (GP_REG_P (regno0
) && MD_REG_P (regno1
))
1301 ret
= "mfhi\t%M0\n\tmflo\t%L0";
1304 else if (regno0
!= (regno1
+1))
1305 ret
= "move\t%0,%1\n\tmove\t%D0,%D1";
1308 ret
= "move\t%D0,%D1\n\tmove\t%0,%1";
1311 else if (code1
== CONST_DOUBLE
)
1313 if (CONST_DOUBLE_HIGH (op1
) != 0 || CONST_DOUBLE_LOW (op1
) != 0)
1315 if (GET_MODE (op1
) == DFmode
)
1318 ret
= "li.d\t%0,%1";
1323 operands
[2] = GEN_INT (CONST_DOUBLE_LOW (op1
));
1324 operands
[3] = GEN_INT (CONST_DOUBLE_HIGH (op1
));
1325 ret
= "li\t%M0,%3\n\tli\t%L0,%2";
1331 if (GP_REG_P (regno0
))
1332 ret
= "move\t%0,%.\n\tmove\t%D0,%.";
1334 else if (FP_REG_P (regno0
))
1337 ret
= (TARGET_FLOAT64
)
1339 : "mtc1\t%.,%0\n\tmtc1\t%.,%D0";
1344 else if (code1
== CONST_INT
&& INTVAL (op1
) == 0)
1346 if (GP_REG_P (regno0
))
1347 ret
= "move\t%0,%.\n\tmove\t%D0,%.";
1349 else if (FP_REG_P (regno0
))
1352 ret
= (TARGET_FLOAT64
)
1354 : "mtc1\t%.,%0\n\tmtc1\t%.,%D0";
1358 else if (code1
== CONST_INT
&& GET_MODE (op0
) == DImode
&& GP_REG_P (regno0
))
1360 operands
[2] = GEN_INT (INTVAL (operands
[1]) >= 0 ? 0 : -1);
1361 ret
= "li\t%M0,%2\n\tli\t%L0,%1";
1364 else if (code1
== MEM
)
1369 mips_count_memory_refs (op1
, 2);
1371 if (FP_REG_P (regno0
))
1374 else if (offsettable_address_p (1, DFmode
, XEXP (op1
, 0)))
1376 operands
[2] = adj_offsettable_operand (op1
, 4);
1377 if (reg_mentioned_p (op0
, op1
))
1378 ret
= "lw\t%D0,%2\n\tlw\t%0,%1";
1380 ret
= "lw\t%0,%1\n\tlw\t%D0,%2";
1383 if (ret
!= (char *)0 && MEM_VOLATILE_P (op1
))
1385 int i
= strlen (ret
);
1386 if (i
> sizeof (volatile_buffer
) - sizeof ("%{%}"))
1389 sprintf (volatile_buffer
, "%%{%s%%}", ret
);
1390 ret
= volatile_buffer
;
1395 else if (code0
== MEM
)
1399 int regno1
= REGNO (op1
) + subreg_word1
;
1401 if (FP_REG_P (regno1
))
1404 else if (offsettable_address_p (1, DFmode
, XEXP (op0
, 0)))
1406 operands
[2] = adj_offsettable_operand (op0
, 4);
1407 ret
= "sw\t%1,%0\n\tsw\t%D1,%2";
1411 else if (code1
== CONST_DOUBLE
1412 && CONST_DOUBLE_HIGH (op1
) == 0
1413 && CONST_DOUBLE_LOW (op1
) == 0
1414 && offsettable_address_p (1, DFmode
, XEXP (op0
, 0)))
1420 operands
[2] = adj_offsettable_operand (op0
, 4);
1421 ret
= "sw\t%.,%0\n\tsw\t%.,%2";
1426 mips_count_memory_refs (op0
, 2);
1428 if (ret
!= (char *)0 && MEM_VOLATILE_P (op0
))
1430 int i
= strlen (ret
);
1431 if (i
> sizeof (volatile_buffer
) - sizeof ("%{%}"))
1434 sprintf (volatile_buffer
, "%%{%s%%}", ret
);
1435 ret
= volatile_buffer
;
1439 if (ret
== (char *)0)
1441 abort_with_insn (insn
, "Bad move");
1445 if (delay
!= DELAY_NONE
)
1446 return mips_fill_delay_slot (ret
, delay
, operands
, insn
);
1452 /* Provide the costs of an addressing mode that contains ADDR.
1453 If ADDR is not a valid address, its cost is irrelevant. */
1456 mips_address_cost (addr
)
1459 switch (GET_CODE (addr
))
1473 rtx offset
= const0_rtx
;
1474 addr
= eliminate_constant_term (addr
, &offset
);
1475 if (GET_CODE (addr
) == LABEL_REF
)
1478 if (GET_CODE (addr
) != SYMBOL_REF
)
1481 if (INTVAL (offset
) < -32768 || INTVAL (offset
) > 32767)
1487 return SYMBOL_REF_FLAG (addr
) ? 1 : 2;
1491 register rtx plus0
= XEXP (addr
, 0);
1492 register rtx plus1
= XEXP (addr
, 1);
1494 if (GET_CODE (plus0
) != REG
&& GET_CODE (plus1
) == REG
)
1496 plus0
= XEXP (addr
, 1);
1497 plus1
= XEXP (addr
, 0);
1500 if (GET_CODE (plus0
) != REG
)
1503 switch (GET_CODE (plus1
))
1510 int value
= INTVAL (plus1
);
1511 return (value
< -32768 || value
> 32767) ? 2 : 1;
1519 return mips_address_cost (plus1
) + 1;
1528 /* Make normal rtx_code into something we can index from an array */
1530 static enum internal_test
1531 map_test_to_internal_test (test_code
)
1532 enum rtx_code test_code
;
1534 enum internal_test test
= ITEST_MAX
;
1539 case EQ
: test
= ITEST_EQ
; break;
1540 case NE
: test
= ITEST_NE
; break;
1541 case GT
: test
= ITEST_GT
; break;
1542 case GE
: test
= ITEST_GE
; break;
1543 case LT
: test
= ITEST_LT
; break;
1544 case LE
: test
= ITEST_LE
; break;
1545 case GTU
: test
= ITEST_GTU
; break;
1546 case GEU
: test
= ITEST_GEU
; break;
1547 case LTU
: test
= ITEST_LTU
; break;
1548 case LEU
: test
= ITEST_LEU
; break;
1555 /* Generate the code to compare two integer values. The return value is:
1556 (reg:SI xx) The pseudo register the comparison is in
1557 (rtx)0 No register, generate a simple branch. */
1560 gen_int_relational (test_code
, result
, cmp0
, cmp1
, p_invert
)
1561 enum rtx_code test_code
; /* relational test (EQ, etc) */
1562 rtx result
; /* result to store comp. or 0 if branch */
1563 rtx cmp0
; /* first operand to compare */
1564 rtx cmp1
; /* second operand to compare */
1565 int *p_invert
; /* NULL or ptr to hold whether branch needs */
1566 /* to reverse its test */
1569 enum rtx_code test_code
; /* code to use in instruction (LT vs. LTU) */
1570 int const_low
; /* low bound of constant we can accept */
1571 int const_high
; /* high bound of constant we can accept */
1572 int const_add
; /* constant to add (convert LE -> LT) */
1573 int reverse_regs
; /* reverse registers in test */
1574 int invert_const
; /* != 0 if invert value if cmp1 is constant */
1575 int invert_reg
; /* != 0 if invert value if cmp1 is register */
1576 int unsignedp
; /* != 0 for unsigned comparisons. */
1579 static struct cmp_info info
[ (int)ITEST_MAX
] = {
1581 { XOR
, 0, 65535, 0, 0, 0, 0, 0 }, /* EQ */
1582 { XOR
, 0, 65535, 0, 0, 1, 1, 0 }, /* NE */
1583 { LT
, -32769, 32766, 1, 1, 1, 0, 0 }, /* GT */
1584 { LT
, -32768, 32767, 0, 0, 1, 1, 0 }, /* GE */
1585 { LT
, -32768, 32767, 0, 0, 0, 0, 0 }, /* LT */
1586 { LT
, -32769, 32766, 1, 1, 0, 1, 0 }, /* LE */
1587 { LTU
, -32769, 32766, 1, 1, 1, 0, 1 }, /* GTU */
1588 { LTU
, -32768, 32767, 0, 0, 1, 1, 1 }, /* GEU */
1589 { LTU
, -32768, 32767, 0, 0, 0, 0, 1 }, /* LTU */
1590 { LTU
, -32769, 32766, 1, 1, 0, 1, 1 }, /* LEU */
1593 enum internal_test test
;
1594 struct cmp_info
*p_info
;
1601 test
= map_test_to_internal_test (test_code
);
1602 if (test
== ITEST_MAX
)
1605 p_info
= &info
[ (int)test
];
1606 eqne_p
= (p_info
->test_code
== XOR
);
1608 /* Eliminate simple branches */
1609 branch_p
= (result
== (rtx
)0);
1612 if (GET_CODE (cmp0
) == REG
|| GET_CODE (cmp0
) == SUBREG
)
1614 /* Comparisons against zero are simple branches */
1615 if (GET_CODE (cmp1
) == CONST_INT
&& INTVAL (cmp1
) == 0)
1618 /* Test for beq/bne. */
1623 /* allocate a pseudo to calculate the value in. */
1624 result
= gen_reg_rtx (SImode
);
1627 /* Make sure we can handle any constants given to us. */
1628 if (GET_CODE (cmp0
) == CONST_INT
)
1629 cmp0
= force_reg (SImode
, cmp0
);
1631 if (GET_CODE (cmp1
) == CONST_INT
)
1633 HOST_WIDE_INT value
= INTVAL (cmp1
);
1634 if (value
< p_info
->const_low
|| value
> p_info
->const_high
)
1635 cmp1
= force_reg (SImode
, cmp1
);
1638 /* See if we need to invert the result. */
1639 invert
= (GET_CODE (cmp1
) == CONST_INT
)
1640 ? p_info
->invert_const
1641 : p_info
->invert_reg
;
1643 if (p_invert
!= (int *)0)
1649 /* Comparison to constants, may involve adding 1 to change a LT into LE.
1650 Comparison between two registers, may involve switching operands. */
1651 if (GET_CODE (cmp1
) == CONST_INT
)
1653 if (p_info
->const_add
!= 0)
1655 HOST_WIDE_INT
new = INTVAL (cmp1
) + p_info
->const_add
;
1656 /* If modification of cmp1 caused overflow,
1657 we would get the wrong answer if we follow the usual path;
1658 thus, x > 0xffffffffu would turn into x > 0u. */
1659 if ((p_info
->unsignedp
1660 ? (unsigned HOST_WIDE_INT
) new > INTVAL (cmp1
)
1661 : new > INTVAL (cmp1
))
1662 != (p_info
->const_add
> 0))
1664 /* This test is always true, but if INVERT is true then
1665 the result of the test needs to be inverted so 0 should
1666 be returned instead. */
1667 emit_move_insn (result
, invert
? const0_rtx
: const_true_rtx
);
1671 cmp1
= GEN_INT (new);
1674 else if (p_info
->reverse_regs
)
1681 if (test
== ITEST_NE
&& GET_CODE (cmp1
) == CONST_INT
&& INTVAL (cmp1
) == 0)
1685 reg
= (invert
|| eqne_p
) ? gen_reg_rtx (SImode
) : result
;
1686 emit_move_insn (reg
, gen_rtx (p_info
->test_code
, SImode
, cmp0
, cmp1
));
1689 if (test
== ITEST_NE
)
1691 emit_move_insn (result
, gen_rtx (GTU
, SImode
, reg
, const0_rtx
));
1695 else if (test
== ITEST_EQ
)
1697 reg2
= (invert
) ? gen_reg_rtx (SImode
) : result
;
1698 emit_move_insn (reg2
, gen_rtx (LTU
, SImode
, reg
, const1_rtx
));
1703 emit_move_insn (result
, gen_rtx (XOR
, SImode
, reg
, const1_rtx
));
1709 /* Emit the common code for doing conditional branches.
1710 operand[0] is the label to jump to.
1711 The comparison operands are saved away by cmp{si,sf,df}. */
1714 gen_conditional_branch (operands
, test_code
)
1716 enum rtx_code test_code
;
1718 static enum machine_mode mode_map
[(int)CMP_MAX
][(int)ITEST_MAX
] = {
1733 CC_REV_FPmode
, /* ne */
1745 CC_REV_FPmode
, /* ne */
1757 enum machine_mode mode
;
1758 enum cmp_type type
= branch_type
;
1759 rtx cmp0
= branch_cmp
[0];
1760 rtx cmp1
= branch_cmp
[1];
1761 rtx label1
= gen_rtx (LABEL_REF
, VOIDmode
, operands
[0]);
1762 rtx label2
= pc_rtx
;
1765 enum internal_test test
= map_test_to_internal_test (test_code
);
1767 if (test
== ITEST_MAX
)
1773 /* Get the machine mode to use (CCmode, CC_EQmode, CC_FPmode, or CC_REV_FPmode). */
1774 mode
= mode_map
[(int)type
][(int)test
];
1775 if (mode
== VOIDmode
)
1778 switch (branch_type
)
1784 reg
= gen_int_relational (test_code
, (rtx
)0, cmp0
, cmp1
, &invert
);
1792 /* Make sure not non-zero constant if ==/!= */
1793 else if (GET_CODE (cmp1
) == CONST_INT
&& INTVAL (cmp1
) != 0)
1794 cmp1
= force_reg (SImode
, cmp1
);
1801 rtx reg
= gen_rtx (REG
, mode
, FPSW_REGNUM
);
1802 emit_insn (gen_rtx (SET
, VOIDmode
, reg
, gen_rtx (test_code
, mode
, cmp0
, cmp1
)));
1810 /* Generate the jump */
1817 emit_jump_insn (gen_rtx (SET
, VOIDmode
,
1819 gen_rtx (IF_THEN_ELSE
, VOIDmode
,
1820 gen_rtx (test_code
, mode
, cmp0
, cmp1
),
1827 abort_with_insn (gen_rtx (test_code
, mode
, cmp0
, cmp1
), "bad test");
1831 #define UNITS_PER_SHORT (SHORT_TYPE_SIZE / BITS_PER_UNIT)
1833 /* Internal code to generate the load and store of one word/short/byte.
1834 The load is emitted directly, and the store insn is returned. */
1838 block_move_load_store (dest_reg
, src_reg
, p_bytes
, p_offset
, align
, orig_src
)
1839 rtx src_reg
; /* register holding source memory address */
1840 rtx dest_reg
; /* register holding dest. memory address */
1841 int *p_bytes
; /* pointer to # bytes remaining */
1842 int *p_offset
; /* pointer to current offset */
1843 int align
; /* alignment */
1844 rtx orig_src
; /* original source for making a reg note */
1846 int bytes
; /* # bytes remaining */
1847 int offset
; /* offset to use */
1848 int size
; /* size in bytes of load/store */
1849 enum machine_mode mode
; /* mode to use for load/store */
1850 rtx reg
; /* temporary register */
1851 rtx src_addr
; /* source address */
1852 rtx dest_addr
; /* destination address */
1853 rtx insn
; /* insn of the load */
1854 rtx orig_src_addr
; /* original source address */
1855 rtx (*load_func
)(); /* function to generate load insn */
1856 rtx (*store_func
)(); /* function to generate destination insn */
1859 if (bytes
<= 0 || align
<= 0)
1862 if (bytes
>= UNITS_PER_WORD
&& align
>= UNITS_PER_WORD
)
1865 size
= UNITS_PER_WORD
;
1866 load_func
= gen_movsi
;
1867 store_func
= gen_movsi
;
1871 /* Don't generate unaligned moves here, rather defer those to the
1872 general movestrsi_internal pattern. */
1873 else if (bytes
>= UNITS_PER_WORD
)
1876 size
= UNITS_PER_WORD
;
1877 load_func
= gen_movsi_ulw
;
1878 store_func
= gen_movsi_usw
;
1882 else if (bytes
>= UNITS_PER_SHORT
&& align
>= UNITS_PER_SHORT
)
1885 size
= UNITS_PER_SHORT
;
1886 load_func
= gen_movhi
;
1887 store_func
= gen_movhi
;
1894 load_func
= gen_movqi
;
1895 store_func
= gen_movqi
;
1899 *p_offset
= offset
+ size
;
1900 *p_bytes
= bytes
- size
;
1905 dest_addr
= dest_reg
;
1909 src_addr
= gen_rtx (PLUS
, Pmode
, src_reg
, GEN_INT (offset
));
1910 dest_addr
= gen_rtx (PLUS
, Pmode
, dest_reg
, GEN_INT (offset
));
1913 reg
= gen_reg_rtx (mode
);
1914 insn
= emit_insn ((*load_func
) (reg
, gen_rtx (MEM
, mode
, src_addr
)));
1915 orig_src_addr
= XEXP (orig_src
, 0);
1916 if (CONSTANT_P (orig_src_addr
))
1917 REG_NOTES (insn
) = gen_rtx (EXPR_LIST
, REG_EQUIV
,
1918 plus_constant (orig_src_addr
, offset
),
1921 return (*store_func
) (gen_rtx (MEM
, mode
, dest_addr
), reg
);
1926 /* Write a series of loads/stores to move some bytes. Generate load/stores as follows:
1938 This way, no NOP's are needed, except at the end, and only
1939 two temp registers are needed. Two delay slots are used
1940 in deference to the R4000. */
1944 block_move_sequence (dest_reg
, src_reg
, bytes
, align
, orig_src
)
1945 rtx dest_reg
; /* register holding destination address */
1946 rtx src_reg
; /* register holding source address */
1947 int bytes
; /* # bytes to move */
1948 int align
; /* max alignment to assume */
1949 rtx orig_src
; /* original source for making a reg note */
1952 rtx prev2_store
= (rtx
)0;
1953 rtx prev_store
= (rtx
)0;
1954 rtx cur_store
= (rtx
)0;
1958 /* Is there a store to do? */
1960 emit_insn (prev2_store
);
1962 prev2_store
= prev_store
;
1963 prev_store
= cur_store
;
1964 cur_store
= block_move_load_store (dest_reg
, src_reg
,
1969 /* Finish up last three stores. */
1971 emit_insn (prev2_store
);
1974 emit_insn (prev_store
);
1977 emit_insn (cur_store
);
1982 /* Write a loop to move a constant number of bytes. Generate load/stores as follows:
1988 temp<last> = src[MAX_MOVE_REGS-1];
1992 dest[MAX_MOVE_REGS-1] = temp<last>;
1993 src += MAX_MOVE_REGS;
1994 dest += MAX_MOVE_REGS;
1995 } while (src != final);
1997 This way, no NOP's are needed, and only MAX_MOVE_REGS+3 temp
1998 registers are needed.
2000 Aligned moves move MAX_MOVE_REGS*4 bytes every (2*MAX_MOVE_REGS)+3
2001 cycles, unaligned moves move MAX_MOVE_REGS*4 bytes every
2002 (4*MAX_MOVE_REGS)+3 cycles, assuming no cache misses. */
2004 #define MAX_MOVE_REGS 4
2005 #define MAX_MOVE_BYTES (MAX_MOVE_REGS * UNITS_PER_WORD)
2008 block_move_loop (dest_reg
, src_reg
, bytes
, align
, orig_src
)
2009 rtx dest_reg
; /* register holding destination address */
2010 rtx src_reg
; /* register holding source address */
2011 int bytes
; /* # bytes to move */
2012 int align
; /* alignment */
2013 rtx orig_src
; /* original source for making a reg note */
2015 rtx dest_mem
= gen_rtx (MEM
, BLKmode
, dest_reg
);
2016 rtx src_mem
= gen_rtx (MEM
, BLKmode
, src_reg
);
2017 rtx align_rtx
= GEN_INT (align
);
2023 if (bytes
< 2*MAX_MOVE_BYTES
)
2026 leftover
= bytes
% MAX_MOVE_BYTES
;
2029 label
= gen_label_rtx ();
2030 final_src
= gen_reg_rtx (Pmode
);
2031 bytes_rtx
= GEN_INT (bytes
);
2035 emit_insn (gen_movsi (final_src
, bytes_rtx
));
2036 emit_insn (gen_addsi3 (final_src
, final_src
, src_reg
));
2039 emit_insn (gen_addsi3 (final_src
, src_reg
, bytes_rtx
));
2043 bytes_rtx
= GEN_INT (MAX_MOVE_BYTES
);
2044 emit_insn (gen_movstrsi_internal (dest_mem
, src_mem
, bytes_rtx
, align_rtx
));
2045 emit_insn (gen_addsi3 (src_reg
, src_reg
, bytes_rtx
));
2046 emit_insn (gen_addsi3 (dest_reg
, dest_reg
, bytes_rtx
));
2047 emit_insn (gen_cmpsi (src_reg
, final_src
));
2048 emit_jump_insn (gen_bne (label
));
2051 emit_insn (gen_movstrsi_internal (dest_mem
, src_mem
,
2057 /* Use a library function to move some bytes. */
2060 block_move_call (dest_reg
, src_reg
, bytes_rtx
)
2065 #ifdef TARGET_MEM_FUNCTIONS
2066 emit_library_call (gen_rtx (SYMBOL_REF
, Pmode
, "memcpy"), 0,
2072 emit_library_call (gen_rtx (SYMBOL_REF
, Pmode
, "bcopy"), 0,
2081 /* Expand string/block move operations.
2083 operands[0] is the pointer to the destination.
2084 operands[1] is the pointer to the source.
2085 operands[2] is the number of bytes to move.
2086 operands[3] is the alignment. */
2089 expand_block_move (operands
)
2092 rtx bytes_rtx
= operands
[2];
2093 rtx align_rtx
= operands
[3];
2094 int constp
= (GET_CODE (bytes_rtx
) == CONST_INT
);
2095 int bytes
= (constp
? INTVAL (bytes_rtx
) : 0);
2096 int align
= INTVAL (align_rtx
);
2097 rtx orig_src
= operands
[1];
2101 if (constp
&& bytes
<= 0)
2104 if (align
> UNITS_PER_WORD
)
2105 align
= UNITS_PER_WORD
;
2107 /* Move the address into scratch registers. */
2108 dest_reg
= copy_addr_to_reg (XEXP (operands
[0], 0));
2109 src_reg
= copy_addr_to_reg (XEXP (orig_src
, 0));
2112 block_move_call (dest_reg
, src_reg
, bytes_rtx
);
2115 else if (constp
&& bytes
<= 3*align
)
2116 block_move_sequence (dest_reg
, src_reg
, bytes
, align
, orig_src
);
2119 else if (constp
&& bytes
<= 2*MAX_MOVE_BYTES
)
2120 emit_insn (gen_movstrsi_internal (gen_rtx (MEM
, BLKmode
, dest_reg
),
2121 gen_rtx (MEM
, BLKmode
, src_reg
),
2122 bytes_rtx
, align_rtx
));
2124 else if (constp
&& align
>= UNITS_PER_WORD
&& optimize
)
2125 block_move_loop (dest_reg
, src_reg
, bytes
, align
, orig_src
);
2127 else if (constp
&& optimize
)
2129 /* If the alignment is not word aligned, generate a test at
2130 runtime, to see whether things wound up aligned, and we
2131 can use the faster lw/sw instead ulw/usw. */
2133 rtx temp
= gen_reg_rtx (Pmode
);
2134 rtx aligned_label
= gen_label_rtx ();
2135 rtx join_label
= gen_label_rtx ();
2136 int leftover
= bytes
% MAX_MOVE_BYTES
;
2140 emit_insn (gen_iorsi3 (temp
, src_reg
, dest_reg
));
2141 emit_insn (gen_andsi3 (temp
, temp
, GEN_INT (UNITS_PER_WORD
-1)));
2142 emit_insn (gen_cmpsi (temp
, const0_rtx
));
2143 emit_jump_insn (gen_beq (aligned_label
));
2145 /* Unaligned loop. */
2146 block_move_loop (dest_reg
, src_reg
, bytes
, 1, orig_src
);
2147 emit_jump_insn (gen_jump (join_label
));
2151 emit_label (aligned_label
);
2152 block_move_loop (dest_reg
, src_reg
, bytes
, UNITS_PER_WORD
, orig_src
);
2153 emit_label (join_label
);
2155 /* Bytes at the end of the loop. */
2159 if (leftover
<= 3*align
)
2160 block_move_sequence (dest_reg
, src_reg
, leftover
, align
, orig_src
);
2164 emit_insn (gen_movstrsi_internal (gen_rtx (MEM
, BLKmode
, dest_reg
),
2165 gen_rtx (MEM
, BLKmode
, src_reg
),
2172 block_move_call (dest_reg
, src_reg
, bytes_rtx
);
2176 /* Emit load/stores for a small constant block_move.
2178 operands[0] is the memory address of the destination.
2179 operands[1] is the memory address of the source.
2180 operands[2] is the number of bytes to move.
2181 operands[3] is the alignment.
2182 operands[4] is a temp register.
2183 operands[5] is a temp register.
2185 operands[3+num_regs] is the last temp register.
2187 The block move type can be one of the following:
2188 BLOCK_MOVE_NORMAL Do all of the block move.
2189 BLOCK_MOVE_NOT_LAST Do all but the last store.
2190 BLOCK_MOVE_LAST Do just the last store. */
2193 output_block_move (insn
, operands
, num_regs
, move_type
)
2197 enum block_move_type move_type
;
2199 rtx dest_reg
= XEXP (operands
[0], 0);
2200 rtx src_reg
= XEXP (operands
[1], 0);
2201 int bytes
= INTVAL (operands
[2]);
2202 int align
= INTVAL (operands
[3]);
2205 int use_lwl_lwr
= FALSE
;
2206 int last_operand
= num_regs
+4;
2212 char *load
; /* load insn without nop */
2213 char *load_nop
; /* load insn with trailing nop */
2214 char *store
; /* store insn */
2215 char *final
; /* if last_store used: NULL or swr */
2216 char *last_store
; /* last store instruction */
2217 int offset
; /* current offset */
2218 enum machine_mode mode
; /* mode to use on (MEM) */
2221 /* Detect a bug in GCC, where it can give us a register
2222 the same as one of the addressing registers and reduce
2223 the number of registers available. */
2225 i
< last_operand
&& safe_regs
< (sizeof(xoperands
) / sizeof(xoperands
[0]));
2228 if (!reg_mentioned_p (operands
[i
], operands
[0])
2229 && !reg_mentioned_p (operands
[i
], operands
[1]))
2231 xoperands
[safe_regs
++] = operands
[i
];
2234 if (safe_regs
< last_operand
)
2236 xoperands
[0] = operands
[0];
2237 xoperands
[1] = operands
[1];
2238 xoperands
[2] = operands
[2];
2239 xoperands
[3] = operands
[3];
2240 return output_block_move (insn
, xoperands
, safe_regs
-4, move_type
);
2243 /* If we are given global or static addresses, and we would be
2244 emitting a few instructions, try to save time by using a
2245 temporary register for the pointer. */
2246 if (num_regs
> 2 && (bytes
> 2*align
|| move_type
!= BLOCK_MOVE_NORMAL
))
2248 if (CONSTANT_P (src_reg
))
2251 mips_count_memory_refs (operands
[1], 1);
2253 src_reg
= operands
[ 3 + num_regs
-- ];
2254 if (move_type
!= BLOCK_MOVE_LAST
)
2256 xoperands
[1] = operands
[1];
2257 xoperands
[0] = src_reg
;
2258 output_asm_insn ("la\t%0,%1", xoperands
);
2262 if (CONSTANT_P (dest_reg
))
2265 mips_count_memory_refs (operands
[0], 1);
2267 dest_reg
= operands
[ 3 + num_regs
-- ];
2268 if (move_type
!= BLOCK_MOVE_LAST
)
2270 xoperands
[1] = operands
[0];
2271 xoperands
[0] = dest_reg
;
2272 output_asm_insn ("la\t%0,%1", xoperands
);
2277 if (num_regs
> (sizeof (load_store
) / sizeof (load_store
[0])))
2278 num_regs
= (sizeof (load_store
) / sizeof (load_store
[0]));
2280 else if (num_regs
< 1)
2281 abort_with_insn (insn
, "Cannot do block move, not enough scratch registers");
2283 if (TARGET_GAS
&& move_type
!= BLOCK_MOVE_LAST
&& set_noreorder
++ == 0)
2284 output_asm_insn (".set\tnoreorder", operands
);
2288 load_store
[num
].offset
= offset
;
2290 if (bytes
>= UNITS_PER_WORD
&& align
>= UNITS_PER_WORD
)
2292 load_store
[num
].load
= "lw\t%0,%1";
2293 load_store
[num
].load_nop
= "lw\t%0,%1%#";
2294 load_store
[num
].store
= "sw\t%0,%1";
2295 load_store
[num
].last_store
= "sw\t%0,%1";
2296 load_store
[num
].final
= (char *)0;
2297 load_store
[num
].mode
= SImode
;
2298 offset
+= UNITS_PER_WORD
;
2299 bytes
-= UNITS_PER_WORD
;
2302 else if (bytes
>= UNITS_PER_WORD
)
2304 #if BYTES_BIG_ENDIAN
2305 load_store
[num
].load
= "lwl\t%0,%1\n\tlwr\t%0,%2";
2306 load_store
[num
].load_nop
= "lwl\t%0,%1\n\tlwr\t%0,%2%#";
2307 load_store
[num
].store
= "swl\t%0,%1\n\tswr\t%0,%2";
2308 load_store
[num
].last_store
= "swr\t%0,%2";
2309 load_store
[num
].final
= "swl\t%0,%1";
2311 load_store
[num
].load
= "lwl\t%0,%2\n\tlwr\t%0,%1";
2312 load_store
[num
].load_nop
= "lwl\t%0,%2\n\tlwr\t%0,%1%#";
2313 load_store
[num
].store
= "swl\t%0,%2\n\tswr\t%0,%1";
2314 load_store
[num
].last_store
= "swr\t%0,%1";
2315 load_store
[num
].final
= "swl\t%0,%2";
2317 load_store
[num
].mode
= SImode
;
2318 offset
+= UNITS_PER_WORD
;
2319 bytes
-= UNITS_PER_WORD
;
2323 else if (bytes
>= UNITS_PER_SHORT
&& align
>= UNITS_PER_SHORT
)
2325 load_store
[num
].load
= "lh\t%0,%1";
2326 load_store
[num
].load_nop
= "lh\t%0,%1%#";
2327 load_store
[num
].store
= "sh\t%0,%1";
2328 load_store
[num
].last_store
= "sh\t%0,%1";
2329 load_store
[num
].final
= (char *)0;
2330 load_store
[num
].offset
= offset
;
2331 load_store
[num
].mode
= HImode
;
2332 offset
+= UNITS_PER_SHORT
;
2333 bytes
-= UNITS_PER_SHORT
;
2338 load_store
[num
].load
= "lb\t%0,%1";
2339 load_store
[num
].load_nop
= "lb\t%0,%1%#";
2340 load_store
[num
].store
= "sb\t%0,%1";
2341 load_store
[num
].last_store
= "sb\t%0,%1";
2342 load_store
[num
].final
= (char *)0;
2343 load_store
[num
].mode
= QImode
;
2348 if (TARGET_STATS
&& move_type
!= BLOCK_MOVE_LAST
)
2350 dslots_load_total
++;
2351 dslots_load_filled
++;
2353 if (CONSTANT_P (src_reg
))
2354 mips_count_memory_refs (src_reg
, 1);
2356 if (CONSTANT_P (dest_reg
))
2357 mips_count_memory_refs (dest_reg
, 1);
2360 /* Emit load/stores now if we have run out of registers or are
2361 at the end of the move. */
2363 if (++num
== num_regs
|| bytes
== 0)
2365 /* If only load/store, we need a NOP after the load. */
2368 load_store
[0].load
= load_store
[0].load_nop
;
2369 if (TARGET_STATS
&& move_type
!= BLOCK_MOVE_LAST
)
2370 dslots_load_filled
--;
2373 if (move_type
!= BLOCK_MOVE_LAST
)
2375 for (i
= 0; i
< num
; i
++)
2382 if (GET_MODE (operands
[i
+4]) != load_store
[i
].mode
)
2383 operands
[i
+4] = gen_rtx (REG
, load_store
[i
].mode
, REGNO (operands
[i
+4]));
2385 offset
= load_store
[i
].offset
;
2386 xoperands
[0] = operands
[i
+4];
2387 xoperands
[1] = gen_rtx (MEM
, load_store
[i
].mode
,
2388 plus_constant (src_reg
, offset
));
2391 xoperands
[2] = gen_rtx (MEM
, load_store
[i
].mode
,
2392 plus_constant (src_reg
, UNITS_PER_WORD
-1+offset
));
2394 output_asm_insn (load_store
[i
].load
, xoperands
);
2398 for (i
= 0; i
< num
; i
++)
2400 int last_p
= (i
== num
-1 && bytes
== 0);
2401 int offset
= load_store
[i
].offset
;
2403 xoperands
[0] = operands
[i
+4];
2404 xoperands
[1] = gen_rtx (MEM
, load_store
[i
].mode
,
2405 plus_constant (dest_reg
, offset
));
2409 xoperands
[2] = gen_rtx (MEM
, load_store
[i
].mode
,
2410 plus_constant (dest_reg
, UNITS_PER_WORD
-1+offset
));
2412 if (move_type
== BLOCK_MOVE_NORMAL
)
2413 output_asm_insn (load_store
[i
].store
, xoperands
);
2415 else if (move_type
== BLOCK_MOVE_NOT_LAST
)
2418 output_asm_insn (load_store
[i
].store
, xoperands
);
2420 else if (load_store
[i
].final
!= (char *)0)
2421 output_asm_insn (load_store
[i
].final
, xoperands
);
2425 output_asm_insn (load_store
[i
].last_store
, xoperands
);
2428 num
= 0; /* reset load_store */
2429 use_lwl_lwr
= FALSE
; /* reset whether or not we used lwl/lwr */
2433 if (TARGET_GAS
&& move_type
!= BLOCK_MOVE_LAST
&& --set_noreorder
== 0)
2434 output_asm_insn (".set\treorder", operands
);
2440 /* Argument support functions. */
2442 /* Initialize CUMULATIVE_ARGS for a function. */
2445 init_cumulative_args (cum
, fntype
, libname
)
2446 CUMULATIVE_ARGS
*cum
; /* argument info to initialize */
2447 tree fntype
; /* tree ptr for function decl */
2448 rtx libname
; /* SYMBOL_REF of library name or 0 */
2450 static CUMULATIVE_ARGS zero_cum
;
2451 tree param
, next_param
;
2453 if (TARGET_DEBUG_E_MODE
)
2455 fprintf (stderr
, "\ninit_cumulative_args, fntype = 0x%.8lx", (long)fntype
);
2457 fputc ('\n', stderr
);
2461 tree ret_type
= TREE_TYPE (fntype
);
2462 fprintf (stderr
, ", fntype code = %s, ret code = %s\n",
2463 tree_code_name
[ (int)TREE_CODE (fntype
) ],
2464 tree_code_name
[ (int)TREE_CODE (ret_type
) ]);
2470 /* Determine if this function has variable arguments. This is
2471 indicated by the last argument being 'void_type_mode' if there
2472 are no variable arguments. The standard MIPS calling sequence
2473 passes all arguments in the general purpose registers in this
2476 for (param
= (fntype
) ? TYPE_ARG_TYPES (fntype
) : 0;
2480 next_param
= TREE_CHAIN (param
);
2481 if (next_param
== (tree
)0 && TREE_VALUE (param
) != void_type_node
)
2482 cum
->gp_reg_found
= 1;
2486 /* Advance the argument to the next argument position. */
2489 function_arg_advance (cum
, mode
, type
, named
)
2490 CUMULATIVE_ARGS
*cum
; /* current arg information */
2491 enum machine_mode mode
; /* current arg mode */
2492 tree type
; /* type of the argument or 0 if lib support */
2493 int named
; /* whether or not the argument was named */
2495 if (TARGET_DEBUG_E_MODE
)
2497 "function_adv( {gp reg found = %d, arg # = %2d, words = %2d}, %4s, 0x%.8x, %d )\n\n",
2498 cum
->gp_reg_found
, cum
->arg_number
, cum
->arg_words
, GET_MODE_NAME (mode
),
2505 error ("Illegal mode given to function_arg_advance");
2512 cum
->gp_reg_found
= 1;
2513 cum
->arg_words
+= (int_size_in_bytes (type
) + 3) / 4;
2521 cum
->arg_words
+= 2;
2525 cum
->gp_reg_found
= 1;
2526 cum
->arg_words
+= 2;
2532 cum
->gp_reg_found
= 1;
2538 /* Return a RTL expression containing the register for the given mode,
2539 or 0 if the argument is too be passed on the stack. */
2542 function_arg (cum
, mode
, type
, named
)
2543 CUMULATIVE_ARGS
*cum
; /* current arg information */
2544 enum machine_mode mode
; /* current arg mode */
2545 tree type
; /* type of the argument or 0 if lib support */
2546 int named
; /* != 0 for normal args, == 0 for ... args */
2551 int struct_p
= ((type
!= (tree
)0)
2552 && (TREE_CODE (type
) == RECORD_TYPE
2553 || TREE_CODE (type
) == UNION_TYPE
));
2555 if (TARGET_DEBUG_E_MODE
)
2557 "function_arg( {gp reg found = %d, arg # = %2d, words = %2d}, %4s, 0x%.8x, %d ) = ",
2558 cum
->gp_reg_found
, cum
->arg_number
, cum
->arg_words
, GET_MODE_NAME (mode
),
2564 error ("Illegal mode given to function_arg");
2568 if (cum
->gp_reg_found
|| cum
->arg_number
>= 2)
2569 regbase
= GP_ARG_FIRST
;
2571 regbase
= (TARGET_SOFT_FLOAT
) ? GP_ARG_FIRST
: FP_ARG_FIRST
;
2572 if (cum
->arg_words
== 1) /* first arg was float */
2573 bias
= 1; /* use correct reg */
2579 cum
->arg_words
+= (cum
->arg_words
& 1);
2580 regbase
= (cum
->gp_reg_found
|| TARGET_SOFT_FLOAT
|| cum
->arg_number
>= 2
2586 if (type
!= (tree
)0 && TYPE_ALIGN (type
) > BITS_PER_WORD
)
2587 cum
->arg_words
+= (cum
->arg_words
& 1);
2589 regbase
= GP_ARG_FIRST
;
2596 regbase
= GP_ARG_FIRST
;
2600 cum
->arg_words
+= (cum
->arg_words
& 1);
2601 regbase
= GP_ARG_FIRST
;
2604 if (cum
->arg_words
>= MAX_ARGS_IN_REGISTERS
)
2606 if (TARGET_DEBUG_E_MODE
)
2607 fprintf (stderr
, "<stack>%s\n", struct_p
? ", [struct]" : "");
2616 ret
= gen_rtx (REG
, mode
, regbase
+ cum
->arg_words
+ bias
);
2618 if (TARGET_DEBUG_E_MODE
)
2619 fprintf (stderr
, "%s%s\n", reg_names
[regbase
+ cum
->arg_words
+ bias
],
2620 struct_p
? ", [struct]" : "");
2622 /* The following is a hack in order to pass 1 byte structures
2623 the same way that the MIPS compiler does (namely by passing
2624 the structure in the high byte or half word of the register).
2625 This also makes varargs work. If we have such a structure,
2626 we save the adjustment RTL, and the call define expands will
2627 emit them. For the VOIDmode argument (argument after the
2628 last real argument, pass back a parallel vector holding each
2629 of the adjustments. */
2631 if (struct_p
&& int_size_in_bytes (type
) < 4)
2633 rtx amount
= GEN_INT (BITS_PER_WORD
2634 - int_size_in_bytes (type
) * BITS_PER_UNIT
);
2635 rtx reg
= gen_rtx (REG
, SImode
, regbase
+ cum
->arg_words
+ bias
);
2636 cum
->adjust
[ cum
->num_adjusts
++ ] = gen_ashlsi3 (reg
, reg
, amount
);
2640 if (mode
== VOIDmode
&& cum
->num_adjusts
> 0)
2641 ret
= gen_rtx (PARALLEL
, VOIDmode
, gen_rtvec_v (cum
->num_adjusts
, cum
->adjust
));
2648 function_arg_partial_nregs (cum
, mode
, type
, named
)
2649 CUMULATIVE_ARGS
*cum
; /* current arg information */
2650 enum machine_mode mode
; /* current arg mode */
2651 tree type
; /* type of the argument or 0 if lib support */
2652 int named
; /* != 0 for normal args, == 0 for ... args */
2654 if (mode
== BLKmode
&& cum
->arg_words
< MAX_ARGS_IN_REGISTERS
)
2656 int words
= (int_size_in_bytes (type
) + 3) / 4;
2658 if (words
+ cum
->arg_words
<= MAX_ARGS_IN_REGISTERS
)
2659 return 0; /* structure fits in registers */
2661 if (TARGET_DEBUG_E_MODE
)
2662 fprintf (stderr
, "function_arg_partial_nregs = %d\n",
2663 MAX_ARGS_IN_REGISTERS
- cum
->arg_words
);
2665 return MAX_ARGS_IN_REGISTERS
- cum
->arg_words
;
2668 else if (mode
== DImode
&& cum
->arg_words
== MAX_ARGS_IN_REGISTERS
-1)
2670 if (TARGET_DEBUG_E_MODE
)
2671 fprintf (stderr
, "function_arg_partial_nregs = 1\n");
2680 /* Print the options used in the assembly file. */
2682 static struct {char *name
; int value
;} target_switches
[]
2693 int mask
= TARGET_DEFAULT
;
2695 /* Allow assembly language comparisons with -mdebug eliminating the
2696 compiler version number and switch lists. */
2698 if (TARGET_DEBUG_MODE
)
2701 fprintf (out
, "\n # %s %s", language_string
, version_string
);
2702 #ifdef TARGET_VERSION_INTERNAL
2703 TARGET_VERSION_INTERNAL (out
);
2706 fprintf (out
, " compiled by GNU C\n\n");
2708 fprintf (out
, " compiled by CC\n\n");
2711 fprintf (out
, " # Cc1 defaults:");
2713 for (j
= 0; j
< sizeof target_switches
/ sizeof target_switches
[0]; j
++)
2715 if (target_switches
[j
].name
[0] != '\0'
2716 && target_switches
[j
].value
> 0
2717 && (target_switches
[j
].value
& mask
) == target_switches
[j
].value
)
2719 mask
&= ~ target_switches
[j
].value
;
2720 len
= strlen (target_switches
[j
].name
) + 1;
2721 if (len
+ line_len
> 79)
2724 fputs ("\n #", out
);
2726 fprintf (out
, " -m%s", target_switches
[j
].name
);
2731 fprintf (out
, "\n\n # Cc1 arguments (-G value = %d, Cpu = %s, ISA = %d):",
2732 mips_section_threshold
, mips_cpu_string
, mips_isa
);
2735 for (p
= &save_argv
[1]; *p
!= (char *)0; p
++)
2740 len
= strlen (arg
) + 1;
2741 if (len
+ line_len
> 79)
2744 fputs ("\n #", out
);
2746 fprintf (out
, " %s", *p
);
2751 fputs ("\n\n", out
);
2755 /* Abort after printing out a specific insn. */
2758 abort_with_insn (insn
, reason
)
2767 /* Write a message to stderr (for use in macros expanded in files that do not
2768 include stdio.h). */
2774 fprintf (stderr
, s
, s1
, s2
);
2784 fprintf (stderr
, "compiling '%s' in '%s'\n",
2785 (current_function_name
!= (char *)0) ? current_function_name
: "<toplevel>",
2786 (current_function_file
!= (char *)0) ? current_function_file
: "<no file>");
2789 #endif /* SIGINFO */
2792 /* Set up the threshold for data to go into the small data area, instead
2793 of the normal data area, and detect any conflicts in the switches. */
2798 register int i
, start
;
2800 register enum machine_mode mode
;
2802 mips_section_threshold
= (g_switch_set
) ? g_switch_value
: MIPS_DEFAULT_GVALUE
;
2804 /* Identify the processor type */
2805 if (mips_cpu_string
== (char *)0
2806 || !strcmp (mips_cpu_string
, "default")
2807 || !strcmp (mips_cpu_string
, "DEFAULT"))
2809 mips_cpu_string
= "default";
2810 mips_cpu
= PROCESSOR_DEFAULT
;
2815 char *p
= mips_cpu_string
;
2817 if (*p
== 'r' || *p
== 'R')
2820 /* Since there is no difference between a R2000 and R3000 in
2821 terms of the scheduler, we collapse them into just an R3000. */
2823 mips_cpu
= PROCESSOR_DEFAULT
;
2827 if (!strcmp (p
, "2000") || !strcmp (p
, "2k") || !strcmp (p
, "2K"))
2828 mips_cpu
= PROCESSOR_R3000
;
2832 if (!strcmp (p
, "3000") || !strcmp (p
, "3k") || !strcmp (p
, "3K"))
2833 mips_cpu
= PROCESSOR_R3000
;
2837 if (!strcmp (p
, "4000") || !strcmp (p
, "4k") || !strcmp (p
, "4K"))
2838 mips_cpu
= PROCESSOR_R4000
;
2842 if (!strcmp (p
, "6000") || !strcmp (p
, "6k") || !strcmp (p
, "6K"))
2843 mips_cpu
= PROCESSOR_R6000
;
2847 if (mips_cpu
== PROCESSOR_DEFAULT
)
2849 error ("bad value (%s) for -mcpu= switch", mips_cpu_string
);
2850 mips_cpu_string
= "default";
2854 /* Now get the architectural level. */
2855 if (mips_isa_string
== (char *)0)
2858 else if (isdigit (*mips_isa_string
))
2859 mips_isa
= atoi (mips_isa_string
);
2863 error ("bad value (%s) for -mips switch", mips_isa_string
);
2867 if (mips_isa
< 0 || mips_isa
> 3)
2868 error ("-mips%d not supported", mips_isa
);
2870 else if (mips_isa
> 1
2871 && (mips_cpu
== PROCESSOR_DEFAULT
|| mips_cpu
== PROCESSOR_R3000
))
2872 error ("-mcpu=%s does not support -mips%d", mips_cpu_string
, mips_isa
);
2874 else if (mips_cpu
== PROCESSOR_R6000
&& mips_isa
> 2)
2875 error ("-mcpu=%s does not support -mips%d", mips_cpu_string
, mips_isa
);
2877 /* make sure sizes of ints/longs/etc. are ok */
2881 fatal ("Only the r4000 can support 64 bit ints");
2883 else if (TARGET_LONG64
)
2884 fatal ("Only the r4000 can support 64 bit longs");
2886 else if (TARGET_LLONG128
)
2887 fatal ("Only the r4000 can support 128 bit long longs");
2889 else if (TARGET_FLOAT64
)
2890 fatal ("Only the r4000 can support 64 bit fp registers");
2892 else if (TARGET_INT64
|| TARGET_LONG64
|| TARGET_LLONG128
|| TARGET_FLOAT64
)
2893 warning ("r4000 64/128 bit types not yet supported");
2895 /* Tell halfpic.c that we have half-pic code if we do. */
2896 if (TARGET_HALF_PIC
)
2899 /* -mrnames says to use the MIPS software convention for register
2900 names instead of the hardware names (ie, a0 instead of $4).
2901 We do this by switching the names in mips_reg_names, which the
2902 reg_names points into via the REGISTER_NAMES macro. */
2904 if (TARGET_NAME_REGS
)
2908 target_flags
&= ~ MASK_NAME_REGS
;
2909 error ("Gas does not support the MIPS software register name convention.");
2912 bcopy ((char *) mips_sw_reg_names
, (char *) mips_reg_names
, sizeof (mips_reg_names
));
2915 /* If this is OSF/1, set up a SIGINFO handler so we can see what function
2916 is currently being compiled. */
2918 if (getenv ("GCC_SIGINFO") != (char *)0)
2920 struct sigaction action
;
2921 action
.sa_handler
= siginfo
;
2923 action
.sa_flags
= SA_RESTART
;
2924 sigaction (SIGINFO
, &action
, (struct sigaction
*)0);
2929 #if defined(ultrix) || defined(__ultrix) || defined(__OSF1__) || defined(__osf__) || defined(osf)
2930 /* If -mstats and -quiet, make stderr line buffered. */
2931 if (quiet_flag
&& TARGET_STATS
)
2932 setvbuf (stderr
, (char *)0, _IOLBF
, BUFSIZ
);
2936 /* Set up the classification arrays now. */
2937 mips_rtx_classify
[(int)PLUS
] = CLASS_ADD_OP
;
2938 mips_rtx_classify
[(int)MINUS
] = CLASS_ADD_OP
;
2939 mips_rtx_classify
[(int)DIV
] = CLASS_DIVMOD_OP
;
2940 mips_rtx_classify
[(int)MOD
] = CLASS_DIVMOD_OP
;
2941 mips_rtx_classify
[(int)UDIV
] = CLASS_DIVMOD_OP
| CLASS_UNSIGNED_OP
;
2942 mips_rtx_classify
[(int)UMOD
] = CLASS_DIVMOD_OP
| CLASS_UNSIGNED_OP
;
2943 mips_rtx_classify
[(int)EQ
] = CLASS_CMP_OP
| CLASS_EQUALITY_OP
| CLASS_FCMP_OP
;
2944 mips_rtx_classify
[(int)NE
] = CLASS_CMP_OP
| CLASS_EQUALITY_OP
| CLASS_FCMP_OP
;
2945 mips_rtx_classify
[(int)GT
] = CLASS_CMP_OP
| CLASS_FCMP_OP
;
2946 mips_rtx_classify
[(int)GE
] = CLASS_CMP_OP
| CLASS_FCMP_OP
;
2947 mips_rtx_classify
[(int)LT
] = CLASS_CMP_OP
| CLASS_FCMP_OP
;
2948 mips_rtx_classify
[(int)LE
] = CLASS_CMP_OP
| CLASS_FCMP_OP
;
2949 mips_rtx_classify
[(int)GTU
] = CLASS_CMP_OP
| CLASS_UNSIGNED_OP
;
2950 mips_rtx_classify
[(int)GEU
] = CLASS_CMP_OP
| CLASS_UNSIGNED_OP
;
2951 mips_rtx_classify
[(int)LTU
] = CLASS_CMP_OP
| CLASS_UNSIGNED_OP
;
2952 mips_rtx_classify
[(int)LEU
] = CLASS_CMP_OP
| CLASS_UNSIGNED_OP
;
2954 mips_print_operand_punct
['?'] = TRUE
;
2955 mips_print_operand_punct
['#'] = TRUE
;
2956 mips_print_operand_punct
['&'] = TRUE
;
2957 mips_print_operand_punct
['!'] = TRUE
;
2958 mips_print_operand_punct
['*'] = TRUE
;
2959 mips_print_operand_punct
['@'] = TRUE
;
2960 mips_print_operand_punct
['.'] = TRUE
;
2961 mips_print_operand_punct
['('] = TRUE
;
2962 mips_print_operand_punct
[')'] = TRUE
;
2963 mips_print_operand_punct
['['] = TRUE
;
2964 mips_print_operand_punct
[']'] = TRUE
;
2965 mips_print_operand_punct
['<'] = TRUE
;
2966 mips_print_operand_punct
['>'] = TRUE
;
2967 mips_print_operand_punct
['{'] = TRUE
;
2968 mips_print_operand_punct
['}'] = TRUE
;
2970 mips_char_to_class
['d'] = GR_REGS
;
2971 mips_char_to_class
['f'] = ((TARGET_HARD_FLOAT
) ? FP_REGS
: NO_REGS
);
2972 mips_char_to_class
['h'] = HI_REG
;
2973 mips_char_to_class
['l'] = LO_REG
;
2974 mips_char_to_class
['x'] = MD_REGS
;
2975 mips_char_to_class
['y'] = GR_REGS
;
2976 mips_char_to_class
['z'] = ST_REGS
;
2978 /* Set up array to map GCC register number to debug register number.
2979 Ignore the special purpose register numbers. */
2981 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
2982 mips_dbx_regno
[i
] = -1;
2984 start
= GP_DBX_FIRST
- GP_REG_FIRST
;
2985 for (i
= GP_REG_FIRST
; i
<= GP_REG_LAST
; i
++)
2986 mips_dbx_regno
[i
] = i
+ start
;
2988 start
= FP_DBX_FIRST
- FP_REG_FIRST
;
2989 for (i
= FP_REG_FIRST
; i
<= FP_REG_LAST
; i
++)
2990 mips_dbx_regno
[i
] = i
+ start
;
2992 /* Set up array giving whether a given register can hold a given mode.
2993 At present, restrict ints from being in FP registers, because reload
2994 is a little enthusiastic about storing extra values in FP registers,
2995 and this is not good for things like OS kernels. Also, due to the
2996 mandatory delay, it is as fast to load from cached memory as to move
2997 from the FP register. */
2999 for (mode
= VOIDmode
;
3000 mode
!= MAX_MACHINE_MODE
;
3001 mode
= (enum machine_mode
)((int)mode
+ 1))
3003 register int size
= GET_MODE_SIZE (mode
);
3004 register enum mode_class
class = GET_MODE_CLASS (mode
);
3006 for (regno
= 0; regno
< FIRST_PSEUDO_REGISTER
; regno
++)
3010 if (mode
== CC_FPmode
|| mode
== CC_REV_FPmode
)
3011 temp
= (regno
== FPSW_REGNUM
);
3013 else if (GP_REG_P (regno
))
3014 temp
= ((regno
& 1) == 0 || (size
<= UNITS_PER_WORD
));
3016 else if (FP_REG_P (regno
))
3017 temp
= ((TARGET_FLOAT64
|| ((regno
& 1) == 0))
3018 && (class == MODE_FLOAT
3019 || class == MODE_COMPLEX_FLOAT
3020 || (TARGET_DEBUG_H_MODE
&& class == MODE_INT
)));
3022 else if (MD_REG_P (regno
))
3023 temp
= (mode
== SImode
|| (regno
== MD_REG_FIRST
&& mode
== DImode
));
3028 mips_hard_regno_mode_ok
[(int)mode
][regno
] = temp
;
3035 * The MIPS debug format wants all automatic variables and arguments
3036 * to be in terms of the virtual frame pointer (stack pointer before
3037 * any adjustment in the function), while the MIPS 3.0 linker wants
3038 * the frame pointer to be the stack pointer after the initial
3039 * adjustment. So, we do the adjustment here. The arg pointer (which
3040 * is eliminated) points to the virtual frame pointer, while the frame
3041 * pointer (which may be eliminated) points to the stack pointer after
3042 * the initial adjustments.
3046 mips_debugger_offset (addr
, offset
)
3050 rtx offset2
= const0_rtx
;
3051 rtx reg
= eliminate_constant_term (addr
, &offset2
);
3054 offset
= INTVAL (offset2
);
3056 if (reg
== stack_pointer_rtx
|| reg
== frame_pointer_rtx
)
3058 int frame_size
= (!current_frame_info
.initialized
)
3059 ? compute_frame_size (get_frame_size ())
3060 : current_frame_info
.total_size
;
3062 offset
= offset
- frame_size
;
3064 /* sdbout_parms does not want this to crash for unrecognized cases. */
3066 else if (reg
!= arg_pointer_rtx
)
3067 abort_with_insn (addr
, "mips_debugger_offset called with non stack/frame/arg pointer.");
3074 /* A C compound statement to output to stdio stream STREAM the
3075 assembler syntax for an instruction operand X. X is an RTL
3078 CODE is a value that can be used to specify one of several ways
3079 of printing the operand. It is used when identical operands
3080 must be printed differently depending on the context. CODE
3081 comes from the `%' specification that was used to request
3082 printing of the operand. If the specification was just `%DIGIT'
3083 then CODE is 0; if the specification was `%LTR DIGIT' then CODE
3084 is the ASCII code for LTR.
3086 If X is a register, this macro should print the register's name.
3087 The names can be found in an array `reg_names' whose type is
3088 `char *[]'. `reg_names' is initialized from `REGISTER_NAMES'.
3090 When the machine description has a specification `%PUNCT' (a `%'
3091 followed by a punctuation character), this macro is called with
3092 a null pointer for X and the punctuation character for CODE.
3094 The MIPS specific codes are:
3096 'X' X is CONST_INT, prints 32 bits in hexadecimal format = "0x%08x",
3097 'x' X is CONST_INT, prints 16 bits in hexadecimal format = "0x%04x",
3098 'd' output integer constant in decimal,
3099 'z' if the operand is 0, use $0 instead of normal operand.
3100 'D' print second register of double-word register operand.
3101 'L' print low-order register of double-word register operand.
3102 'M' print high-order register of double-word register operand.
3103 'C' print part of opcode for a branch condition.
3104 'N' print part of opcode for a branch condition, inverted.
3105 '(' Turn on .set noreorder
3106 ')' Turn on .set reorder
3107 '[' Turn on .set noat
3109 '<' Turn on .set nomacro
3110 '>' Turn on .set macro
3111 '{' Turn on .set volatile (not GAS)
3112 '}' Turn on .set novolatile (not GAS)
3113 '&' Turn on .set noreorder if filling delay slots
3114 '*' Turn on both .set noreorder and .set nomacro if filling delay slots
3115 '!' Turn on .set nomacro if filling delay slots
3116 '#' Print nop if in a .set noreorder section.
3117 '?' Print 'l' if we are to use a branch likely instead of normal branch.
3118 '@' Print the name of the assembler temporary register (at or $1).
3119 '.' Print the name of the register with a hard-wired zero (zero or $0). */
3122 print_operand (file
, op
, letter
)
3123 FILE *file
; /* file to write to */
3124 rtx op
; /* operand to print */
3125 int letter
; /* %<letter> or 0 */
3127 register enum rtx_code code
;
3129 if (PRINT_OPERAND_PUNCT_VALID_P (letter
))
3134 error ("PRINT_OPERAND: Unknown punctuation '%c'", letter
);
3138 if (mips_branch_likely
)
3143 fputs (reg_names
[GP_REG_FIRST
+ 1], file
);
3147 fputs (reg_names
[GP_REG_FIRST
+ 0], file
);
3151 if (final_sequence
!= 0 && set_noreorder
++ == 0)
3152 fputs (".set\tnoreorder\n\t", file
);
3156 if (final_sequence
!= 0)
3158 if (set_noreorder
++ == 0)
3159 fputs (".set\tnoreorder\n\t", file
);
3161 if (set_nomacro
++ == 0)
3162 fputs (".set\tnomacro\n\t", file
);
3167 if (final_sequence
!= 0 && set_nomacro
++ == 0)
3168 fputs ("\n\t.set\tnomacro", file
);
3172 if (set_noreorder
!= 0)
3173 fputs ("\n\tnop", file
);
3175 else if (TARGET_GAS
|| TARGET_STATS
)
3176 fputs ("\n\t#nop", file
);
3181 if (set_noreorder
++ == 0)
3182 fputs (".set\tnoreorder\n\t", file
);
3186 if (set_noreorder
== 0)
3187 error ("internal error: %%) found without a %%( in assembler pattern");
3189 else if (--set_noreorder
== 0)
3190 fputs ("\n\t.set\treorder", file
);
3195 if (set_noat
++ == 0)
3196 fputs (".set\tnoat\n\t", file
);
3201 error ("internal error: %%] found without a %%[ in assembler pattern");
3203 else if (--set_noat
== 0)
3204 fputs ("\n\t.set\tat", file
);
3209 if (set_nomacro
++ == 0)
3210 fputs (".set\tnomacro\n\t", file
);
3214 if (set_nomacro
== 0)
3215 error ("internal error: %%> found without a %%< in assembler pattern");
3217 else if (--set_nomacro
== 0)
3218 fputs ("\n\t.set\tmacro", file
);
3223 if (set_volatile
++ == 0)
3224 fprintf (file
, "%s.set\tvolatile\n\t", (TARGET_MIPS_AS
) ? "" : "#");
3228 if (set_volatile
== 0)
3229 error ("internal error: %%} found without a %%{ in assembler pattern");
3231 else if (--set_volatile
== 0)
3232 fprintf (file
, "\n\t%s.set\tnovolatile", (TARGET_MIPS_AS
) ? "" : "#");
3241 error ("PRINT_OPERAND null pointer");
3245 code
= GET_CODE (op
);
3249 case EQ
: fputs ("eq", file
); break;
3250 case NE
: fputs ("ne", file
); break;
3251 case GT
: fputs ("gt", file
); break;
3252 case GE
: fputs ("ge", file
); break;
3253 case LT
: fputs ("lt", file
); break;
3254 case LE
: fputs ("le", file
); break;
3255 case GTU
: fputs ("gtu", file
); break;
3256 case GEU
: fputs ("geu", file
); break;
3257 case LTU
: fputs ("ltu", file
); break;
3258 case LEU
: fputs ("leu", file
); break;
3261 abort_with_insn (op
, "PRINT_OPERAND, illegal insn for %%C");
3264 else if (letter
== 'N')
3267 case EQ
: fputs ("ne", file
); break;
3268 case NE
: fputs ("eq", file
); break;
3269 case GT
: fputs ("le", file
); break;
3270 case GE
: fputs ("lt", file
); break;
3271 case LT
: fputs ("ge", file
); break;
3272 case LE
: fputs ("gt", file
); break;
3273 case GTU
: fputs ("leu", file
); break;
3274 case GEU
: fputs ("ltu", file
); break;
3275 case LTU
: fputs ("geu", file
); break;
3276 case LEU
: fputs ("gtu", file
); break;
3279 abort_with_insn (op
, "PRINT_OPERAND, illegal insn for %%N");
3282 else if (code
== REG
)
3284 register int regnum
= REGNO (op
);
3287 regnum
+= MOST_SIGNIFICANT_WORD
;
3289 else if (letter
== 'L')
3290 regnum
+= LEAST_SIGNIFICANT_WORD
;
3292 else if (letter
== 'D')
3295 fprintf (file
, "%s", reg_names
[regnum
]);
3298 else if (code
== MEM
)
3299 output_address (XEXP (op
, 0));
3301 else if (code
== CONST_DOUBLE
)
3303 #if HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT
3304 union { double d
; int i
[2]; } u
;
3305 u
.i
[0] = CONST_DOUBLE_LOW (op
);
3306 u
.i
[1] = CONST_DOUBLE_HIGH (op
);
3307 if (GET_MODE (op
) == SFmode
)
3313 fprintf (file
, "%.20e", u
.d
);
3315 fatal ("CONST_DOUBLE found in cross compilation");
3319 else if ((letter
== 'x') && (GET_CODE(op
) == CONST_INT
))
3320 fprintf (file
, "0x%04x", 0xffff & (INTVAL(op
)));
3322 else if ((letter
== 'X') && (GET_CODE(op
) == CONST_INT
))
3323 fprintf (file
, "0x%08x", INTVAL(op
));
3325 else if ((letter
== 'd') && (GET_CODE(op
) == CONST_INT
))
3326 fprintf (file
, "%d", (INTVAL(op
)));
3328 else if (letter
== 'z'
3329 && (GET_CODE (op
) == CONST_INT
)
3330 && INTVAL (op
) == 0)
3331 fputs (reg_names
[GP_REG_FIRST
], file
);
3333 else if (letter
== 'd' || letter
== 'x' || letter
== 'X')
3334 fatal ("PRINT_OPERAND: letter %c was found & insn was not CONST_INT", letter
);
3337 output_addr_const (file
, op
);
3341 /* A C compound statement to output to stdio stream STREAM the
3342 assembler syntax for an instruction operand that is a memory
3343 reference whose address is ADDR. ADDR is an RTL expression.
3345 On some machines, the syntax for a symbolic address depends on
3346 the section that the address refers to. On these machines,
3347 define the macro `ENCODE_SECTION_INFO' to store the information
3348 into the `symbol_ref', and then check for it here. */
3351 print_operand_address (file
, addr
)
3356 error ("PRINT_OPERAND_ADDRESS, null pointer");
3359 switch (GET_CODE (addr
))
3362 abort_with_insn (addr
, "PRINT_OPERAND_ADDRESS, illegal insn #1");
3366 if (REGNO (addr
) == ARG_POINTER_REGNUM
)
3367 abort_with_insn (addr
, "Arg pointer not eliminated.");
3369 fprintf (file
, "0(%s)", reg_names
[REGNO (addr
)]);
3374 register rtx reg
= (rtx
)0;
3375 register rtx offset
= (rtx
)0;
3376 register rtx arg0
= XEXP (addr
, 0);
3377 register rtx arg1
= XEXP (addr
, 1);
3379 if (GET_CODE (arg0
) == REG
)
3383 if (GET_CODE (offset
) == REG
)
3384 abort_with_insn (addr
, "PRINT_OPERAND_ADDRESS, 2 regs");
3386 else if (GET_CODE (arg1
) == REG
)
3391 else if (CONSTANT_P (arg0
) && CONSTANT_P (arg1
))
3393 output_addr_const (file
, addr
);
3397 abort_with_insn (addr
, "PRINT_OPERAND_ADDRESS, no regs");
3399 if (!CONSTANT_P (offset
))
3400 abort_with_insn (addr
, "PRINT_OPERAND_ADDRESS, illegal insn #2");
3402 if (REGNO (reg
) == ARG_POINTER_REGNUM
)
3403 abort_with_insn (addr
, "Arg pointer not eliminated.");
3405 output_addr_const (file
, offset
);
3406 fprintf (file
, "(%s)", reg_names
[REGNO (reg
)]);
3414 output_addr_const (file
, addr
);
3420 /* If optimizing for the global pointer, keep track of all of
3421 the externs, so that at the end of the file, we can emit
3422 the appropriate .extern declaration for them, before writing
3423 out the text section. We assume that all names passed to
3424 us are in the permanent obstack, so that they will be valid
3425 at the end of the compilation.
3427 If we have -G 0, or the extern size is unknown, don't bother
3428 emitting the .externs. */
3431 mips_output_external (file
, decl
, name
)
3436 register struct extern_list
*p
;
3440 && mips_section_threshold
!= 0
3441 && ((TREE_CODE (decl
)) != FUNCTION_DECL
)
3442 && ((len
= int_size_in_bytes (TREE_TYPE (decl
))) > 0))
3444 p
= (struct extern_list
*)permalloc ((long) sizeof (struct extern_list
));
3445 p
->next
= extern_head
;
3454 /* Compute a string to use as a temporary file name. */
3460 char *base
= getenv ("TMPDIR");
3463 if (base
== (char *)0)
3466 if (access (P_tmpdir
, R_OK
| W_OK
) == 0)
3470 if (access ("/usr/tmp", R_OK
| W_OK
) == 0)
3476 len
= strlen (base
);
3477 temp_filename
= (char *) alloca (len
+ sizeof("/ccXXXXXX"));
3478 strcpy (temp_filename
, base
);
3479 if (len
> 0 && temp_filename
[len
-1] != '/')
3480 temp_filename
[len
++] = '/';
3482 strcpy (temp_filename
+ len
, "ccXXXXXX");
3483 mktemp (temp_filename
);
3485 stream
= fopen (temp_filename
, "w+");
3487 pfatal_with_name (temp_filename
);
3489 unlink (temp_filename
);
3494 /* Emit a new filename to a stream. If this is MIPS ECOFF, watch out
3495 for .file's that start within a function. If we are smuggling stabs, try to
3496 put out a MIPS ECOFF file and a stab. */
3499 mips_output_filename (stream
, name
)
3503 static int first_time
= TRUE
;
3504 char ltext_label_name
[100];
3510 current_function_file
= name
;
3511 fprintf (stream
, "\t.file\t%d ", num_source_filenames
);
3512 output_quoted_string (stream
, name
);
3513 fprintf (stream
, "\n");
3514 if (!TARGET_GAS
&& write_symbols
== DBX_DEBUG
)
3515 fprintf (stream
, "\t#@stabs\n");
3518 else if (!TARGET_GAS
&& write_symbols
== DBX_DEBUG
)
3520 ASM_GENERATE_INTERNAL_LABEL (ltext_label_name
, "Ltext", 0);
3521 fprintf (stream
, "%s ", ASM_STABS_OP
);
3522 output_quoted_string (stream
, name
);
3523 fprintf (stream
, ",%d,0,0,%s\n", N_SOL
, <ext_label_name
[1]);
3526 else if (name
!= current_function_file
3527 && strcmp (name
, current_function_file
) != 0)
3529 if (inside_function
&& !TARGET_GAS
)
3531 if (!file_in_function_warning
)
3533 file_in_function_warning
= TRUE
;
3534 ignore_line_number
= TRUE
;
3535 warning ("MIPS ECOFF format does not allow changing filenames within functions with #line");
3538 fprintf (stream
, "\t#.file\t%d ", num_source_filenames
);
3544 current_function_file
= name
;
3545 fprintf (stream
, "\t.file\t%d ", num_source_filenames
);
3547 output_quoted_string (stream
, name
);
3548 fprintf (stream
, "\n");
3553 /* Emit a linenumber. For encapsulated stabs, we need to put out a stab
3554 as well as a .loc, since it is possible that MIPS ECOFF might not be
3555 able to represent the location for inlines that come from a different
3559 mips_output_lineno (stream
, line
)
3563 if (!TARGET_GAS
&& write_symbols
== DBX_DEBUG
)
3566 fprintf (stream
, "$LM%d:\n\t%s %d,0,%d,$LM%d\n",
3567 sym_lineno
, ASM_STABN_OP
, N_SLINE
, line
, sym_lineno
);
3572 fprintf (stream
, "\n\t%s.loc\t%d %d\n",
3573 (ignore_line_number
) ? "#" : "",
3574 num_source_filenames
, line
);
3576 LABEL_AFTER_LOC (stream
);
3581 /* If defined, a C statement to be executed just prior to the
3582 output of assembler code for INSN, to modify the extracted
3583 operands so they will be output differently.
3585 Here the argument OPVEC is the vector containing the operands
3586 extracted from INSN, and NOPERANDS is the number of elements of
3587 the vector which contain meaningful data for this insn. The
3588 contents of this vector are what will be used to convert the
3589 insn template into assembler code, so you can change the
3590 assembler output by changing the contents of the vector.
3592 We use it to check if the current insn needs a nop in front of it
3593 because of load delays, and also to update the delay slot
3597 final_prescan_insn (insn
, opvec
, noperands
)
3602 if (dslots_number_nops
> 0)
3604 rtx pattern
= PATTERN (insn
);
3605 int length
= get_attr_length (insn
);
3607 /* Do we need to emit a NOP? */
3609 || (mips_load_reg
!= (rtx
)0 && reg_mentioned_p (mips_load_reg
, pattern
))
3610 || (mips_load_reg2
!= (rtx
)0 && reg_mentioned_p (mips_load_reg2
, pattern
))
3611 || (mips_load_reg3
!= (rtx
)0 && reg_mentioned_p (mips_load_reg3
, pattern
))
3612 || (mips_load_reg4
!= (rtx
)0 && reg_mentioned_p (mips_load_reg4
, pattern
)))
3613 fputs ((set_noreorder
) ? "\tnop\n" : "\t#nop\n", asm_out_file
);
3616 dslots_load_filled
++;
3618 while (--dslots_number_nops
> 0)
3619 fputs ((set_noreorder
) ? "\tnop\n" : "\t#nop\n", asm_out_file
);
3621 mips_load_reg
= (rtx
)0;
3622 mips_load_reg2
= (rtx
)0;
3623 mips_load_reg3
= (rtx
)0;
3624 mips_load_reg4
= (rtx
)0;
3626 if (set_noreorder
&& --set_noreorder
== 0)
3627 fputs ("\t.set\treorder\n", asm_out_file
);
3632 enum rtx_code code
= GET_CODE (insn
);
3633 if (code
== JUMP_INSN
|| code
== CALL_INSN
)
3634 dslots_jump_total
++;
3639 /* Output at beginning of assembler file.
3640 If we are optimizing to use the global pointer, create a temporary
3641 file to hold all of the text stuff, and write it out to the end.
3642 This is needed because the MIPS assembler is evidently one pass,
3643 and if it hasn't seen the relevant .comm/.lcomm/.extern/.sdata
3644 declaration when the code is processed, it generates a two
3645 instruction sequence. */
3648 mips_asm_file_start (stream
)
3651 ASM_OUTPUT_SOURCE_FILENAME (stream
, main_input_filename
);
3653 /* Versions of the MIPS assembler before 2.20 generate errors
3654 if a branch inside of a .set noreorder section jumps to a
3655 label outside of the .set noreorder section. Revision 2.20
3656 just set nobopt silently rather than fixing the bug. */
3658 if (TARGET_MIPS_AS
&& optimize
&& flag_delayed_branch
)
3659 fprintf (stream
, "\t.set\tnobopt\n");
3661 /* Generate the pseudo ops that the Pyramid based System V.4 wants. */
3662 if (TARGET_ABICALLS
)
3663 fprintf (stream
, "\t.abicalls\n");
3667 asm_out_data_file
= stream
;
3668 asm_out_text_file
= make_temp_file ();
3671 asm_out_data_file
= asm_out_text_file
= stream
;
3673 if (TARGET_NAME_REGS
)
3674 fprintf (asm_out_file
, "#include <regdef.h>\n");
3676 print_options (stream
);
3680 /* If we are optimizing the global pointer, emit the text section now
3681 and any small externs which did not have .comm, etc that are
3682 needed. Also, give a warning if the data area is more than 32K and
3683 -pic because 3 instructions are needed to reference the data
3687 mips_asm_file_end (file
)
3692 struct extern_list
*p
;
3696 HALF_PIC_FINISH (file
);
3703 for (p
= extern_head
; p
!= 0; p
= p
->next
)
3705 name_tree
= get_identifier (p
->name
);
3707 /* Positively ensure only one .extern for any given symbol. */
3708 if (! TREE_ASM_WRITTEN (name_tree
))
3710 TREE_ASM_WRITTEN (name_tree
) = 1;
3711 fputs ("\t.extern\t", file
);
3712 assemble_name (file
, p
->name
);
3713 fprintf (file
, ", %d\n", p
->size
);
3717 fprintf (file
, "\n\t.text\n");
3718 rewind (asm_out_text_file
);
3719 if (ferror (asm_out_text_file
))
3720 fatal_io_error (temp_filename
);
3722 while ((len
= fread (buffer
, 1, sizeof (buffer
), asm_out_text_file
)) > 0)
3723 if (fwrite (buffer
, 1, len
, file
) != len
)
3724 pfatal_with_name (asm_file_name
);
3727 pfatal_with_name (temp_filename
);
3729 if (fclose (asm_out_text_file
) != 0)
3730 pfatal_with_name (temp_filename
);
3735 /* Emit either a label, .comm, or .lcomm directive, and mark
3736 that the symbol is used, so that we don't emit an .extern
3737 for it in mips_asm_file_end. */
3740 mips_declare_object (stream
, name
, init_string
, final_string
, size
)
3747 fputs (init_string
, stream
); /* "", "\t.comm\t", or "\t.lcomm\t" */
3748 assemble_name (stream
, name
);
3749 fprintf (stream
, final_string
, size
); /* ":\n", ",%u\n", ",%u\n" */
3751 if (TARGET_GP_OPT
&& mips_section_threshold
!= 0)
3753 tree name_tree
= get_identifier (name
);
3754 TREE_ASM_WRITTEN (name_tree
) = 1;
3759 /* Output a double precision value to the assembler. If both the
3760 host and target are IEEE, emit the values in hex. */
3763 mips_output_double (stream
, value
)
3765 REAL_VALUE_TYPE value
;
3767 #ifdef REAL_VALUE_TO_TARGET_DOUBLE
3769 REAL_VALUE_TO_TARGET_DOUBLE (value
, value_long
);
3771 fprintf (stream
, "\t.word\t0x%08lx\t\t# %.20g\n\t.word\t0x%08lx\n",
3772 value_long
[0], value
, value_long
[1]);
3774 fprintf (stream
, "\t.double\t%.20g\n", value
);
3779 /* Output a single precision value to the assembler. If both the
3780 host and target are IEEE, emit the values in hex. */
3783 mips_output_float (stream
, value
)
3785 REAL_VALUE_TYPE value
;
3787 #ifdef REAL_VALUE_TO_TARGET_SINGLE
3789 REAL_VALUE_TO_TARGET_SINGLE (value
, value_long
);
3791 fprintf (stream
, "\t.word\t0x%08lx\t\t# %.12g (float)\n", value_long
, value
);
3793 fprintf (stream
, "\t.float\t%.12g\n", value
);
3798 /* Return TRUE if any register used in the epilogue is used. This to insure
3799 any insn put into the epilogue delay slots is safe. */
3802 epilogue_reg_mentioned_p (insn
)
3807 register enum rtx_code code
;
3813 if (GET_CODE (insn
) == LABEL_REF
)
3816 code
= GET_CODE (insn
);
3820 regno
= REGNO (insn
);
3821 if (regno
== STACK_POINTER_REGNUM
)
3824 if (regno
== FRAME_POINTER_REGNUM
&& frame_pointer_needed
)
3827 if (!call_used_regs
[regno
])
3830 if (regno
!= MIPS_TEMP1_REGNUM
&& regno
!= MIPS_TEMP2_REGNUM
)
3833 if (!current_frame_info
.initialized
)
3834 compute_frame_size (get_frame_size ());
3836 return (current_frame_info
.total_size
>= 32768);
3846 fmt
= GET_RTX_FORMAT (code
);
3847 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
3852 for (j
= XVECLEN (insn
, i
) - 1; j
>= 0; j
--)
3853 if (epilogue_reg_mentioned_p (XVECEXP (insn
, i
, j
)))
3856 else if (fmt
[i
] == 'e' && epilogue_reg_mentioned_p (XEXP (insn
, i
)))
3864 /* Return the bytes needed to compute the frame pointer from the current
3867 Mips stack frames look like:
3869 Before call After call
3870 +-----------------------+ +-----------------------+
3873 | caller's temps. | | caller's temps. |
3875 +-----------------------+ +-----------------------+
3877 | arguments on stack. | | arguments on stack. |
3879 +-----------------------+ +-----------------------+
3880 | 4 words to save | | 4 words to save |
3881 | arguments passed | | arguments passed |
3882 | in registers, even | | in registers, even |
3883 SP->| if not passed. | FP->| if not passed. |
3884 +-----------------------+ +-----------------------+
3886 | GP save for V.4 abi |
3888 +-----------------------+
3890 | fp register save |
3892 +-----------------------+
3894 | gp register save |
3896 +-----------------------+
3900 +-----------------------+
3902 | alloca allocations |
3904 +-----------------------+
3906 | arguments on stack |
3908 +-----------------------+
3910 | arguments passed |
3911 | in registers, even |
3912 low SP->| if not passed. |
3913 memory +-----------------------+
3918 compute_frame_size (size
)
3919 int size
; /* # of var. bytes allocated */
3922 long total_size
; /* # bytes that the entire frame takes up */
3923 long var_size
; /* # bytes that variables take up */
3924 long args_size
; /* # bytes that outgoing arguments take up */
3925 long extra_size
; /* # extra bytes */
3926 long gp_reg_rounded
; /* # bytes needed to store gp after rounding */
3927 long gp_reg_size
; /* # bytes needed to store gp regs */
3928 long fp_reg_size
; /* # bytes needed to store fp regs */
3929 long mask
; /* mask of saved gp registers */
3930 long fmask
; /* mask of saved fp registers */
3931 int fp_inc
; /* 1 or 2 depending on the size of fp regs */
3932 long fp_bits
; /* bitmask to use for each fp register */
3938 extra_size
= MIPS_STACK_ALIGN (((TARGET_ABICALLS
) ? UNITS_PER_WORD
: 0));
3939 var_size
= MIPS_STACK_ALIGN (size
);
3940 args_size
= MIPS_STACK_ALIGN (current_function_outgoing_args_size
);
3942 /* The MIPS 3.0 linker does not like functions that dynamically
3943 allocate the stack and have 0 for STACK_DYNAMIC_OFFSET, since it
3944 looks like we are trying to create a second frame pointer to the
3945 function, so allocate some stack space to make it happy. */
3947 if (args_size
== 0 && current_function_calls_alloca
)
3948 args_size
= 4*UNITS_PER_WORD
;
3950 total_size
= var_size
+ args_size
+ extra_size
;
3952 /* Calculate space needed for gp registers. */
3953 for (regno
= GP_REG_FIRST
; regno
<= GP_REG_LAST
; regno
++)
3955 if (MUST_SAVE_REGISTER (regno
))
3957 gp_reg_size
+= UNITS_PER_WORD
;
3958 mask
|= 1L << (regno
- GP_REG_FIRST
);
3962 /* Calculate space needed for fp registers. */
3974 for (regno
= FP_REG_FIRST
; regno
<= FP_REG_LAST
; regno
+= fp_inc
)
3976 if (regs_ever_live
[regno
] && !call_used_regs
[regno
])
3978 fp_reg_size
+= 2*UNITS_PER_WORD
;
3979 fmask
|= fp_bits
<< (regno
- FP_REG_FIRST
);
3983 gp_reg_rounded
= MIPS_STACK_ALIGN (gp_reg_size
);
3984 total_size
+= gp_reg_rounded
+ fp_reg_size
;
3986 if (total_size
== extra_size
)
3987 total_size
= extra_size
= 0;
3989 /* Save other computed information. */
3990 current_frame_info
.total_size
= total_size
;
3991 current_frame_info
.var_size
= var_size
;
3992 current_frame_info
.args_size
= args_size
;
3993 current_frame_info
.extra_size
= extra_size
;
3994 current_frame_info
.gp_reg_size
= gp_reg_size
;
3995 current_frame_info
.fp_reg_size
= fp_reg_size
;
3996 current_frame_info
.mask
= mask
;
3997 current_frame_info
.fmask
= fmask
;
3998 current_frame_info
.initialized
= reload_completed
;
3999 current_frame_info
.num_gp
= gp_reg_size
/ UNITS_PER_WORD
;
4000 current_frame_info
.num_fp
= fp_reg_size
/ (2*UNITS_PER_WORD
);
4004 unsigned long offset
= args_size
+ var_size
+ gp_reg_size
- UNITS_PER_WORD
;
4005 current_frame_info
.gp_sp_offset
= offset
;
4006 current_frame_info
.gp_save_offset
= offset
- total_size
;
4010 current_frame_info
.gp_sp_offset
= 0;
4011 current_frame_info
.gp_save_offset
= 0;
4017 unsigned long offset
= args_size
+ var_size
+ gp_reg_rounded
+ fp_reg_size
- 2*UNITS_PER_WORD
;
4018 current_frame_info
.fp_sp_offset
= offset
;
4019 current_frame_info
.fp_save_offset
= offset
- total_size
+ UNITS_PER_WORD
;
4023 current_frame_info
.fp_sp_offset
= 0;
4024 current_frame_info
.fp_save_offset
= 0;
4027 /* Ok, we're done. */
4032 /* Common code to emit the insns (or to write the instructions to a file)
4033 to save/restore registers.
4035 Other parts of the code assume that MIPS_TEMP1_REGNUM (aka large_reg)
4036 is not modified within save_restore_insns. */
4038 #define BITSET_P(value,bit) (((value) & (1L << (bit))) != 0)
4041 save_restore_insns (store_p
, large_reg
, large_offset
, file
)
4042 int store_p
; /* true if this is prologue */
4043 rtx large_reg
; /* register holding large offset constant or NULL */
4044 long large_offset
; /* large constant offset value */
4045 FILE *file
; /* file to write instructions to instead of making RTL */
4047 long mask
= current_frame_info
.mask
;
4048 long fmask
= current_frame_info
.fmask
;
4056 if (frame_pointer_needed
&& !BITSET_P (mask
, FRAME_POINTER_REGNUM
- GP_REG_FIRST
))
4059 if (mask
== 0 && fmask
== 0)
4062 /* Save registers starting from high to low. The debuggers prefer
4063 at least the return register be stored at func+4, and also it
4064 allows us not to need a nop in the epilog if at least one
4065 register is reloaded in addition to return address. */
4067 /* Save GP registers if needed. */
4070 /* Pick which pointer to use as a base register. For small
4071 frames, just use the stack pointer. Otherwise, use a
4072 temporary register. Save 2 cycles if the save area is near
4073 the end of a large frame, by reusing the constant created in
4074 the prologue/epilogue to adjust the stack frame. */
4076 gp_offset
= current_frame_info
.gp_sp_offset
;
4077 end_offset
= gp_offset
- (current_frame_info
.gp_reg_size
- UNITS_PER_WORD
);
4079 if (gp_offset
< 0 || end_offset
< 0)
4080 fatal ("gp_offset (%ld) or end_offset (%ld) is less than zero.",
4081 gp_offset
, end_offset
);
4083 else if (gp_offset
< 32768)
4085 base_reg_rtx
= stack_pointer_rtx
;
4089 else if (large_reg
!= (rtx
)0
4090 && (((unsigned long)(large_offset
- gp_offset
)) < 32768)
4091 && (((unsigned long)(large_offset
- end_offset
)) < 32768))
4093 base_reg_rtx
= gen_rtx (REG
, Pmode
, MIPS_TEMP2_REGNUM
);
4094 base_offset
= large_offset
;
4095 if (file
== (FILE *)0)
4096 emit_insn (gen_addsi3 (base_reg_rtx
, large_reg
, stack_pointer_rtx
));
4098 fprintf (file
, "\taddu\t%s,%s,%s\n",
4099 reg_names
[MIPS_TEMP2_REGNUM
],
4100 reg_names
[REGNO (large_reg
)],
4101 reg_names
[STACK_POINTER_REGNUM
]);
4106 base_reg_rtx
= gen_rtx (REG
, Pmode
, MIPS_TEMP2_REGNUM
);
4107 base_offset
= gp_offset
;
4108 if (file
== (FILE *)0)
4110 emit_move_insn (base_reg_rtx
, GEN_INT (gp_offset
));
4111 emit_insn (gen_addsi3 (base_reg_rtx
, base_reg_rtx
, stack_pointer_rtx
));
4114 fprintf (file
, "\tli\t%s,0x%.08lx\t# %ld\n\taddu\t%s,%s,%s\n",
4115 reg_names
[MIPS_TEMP2_REGNUM
],
4118 reg_names
[MIPS_TEMP2_REGNUM
],
4119 reg_names
[MIPS_TEMP2_REGNUM
],
4120 reg_names
[STACK_POINTER_REGNUM
]);
4123 for (regno
= GP_REG_LAST
; regno
>= GP_REG_FIRST
; regno
--)
4125 if (BITSET_P (mask
, regno
- GP_REG_FIRST
))
4127 if (file
== (FILE *)0)
4129 rtx reg_rtx
= gen_rtx (REG
, Pmode
, regno
);
4130 rtx mem_rtx
= gen_rtx (MEM
, Pmode
,
4131 gen_rtx (PLUS
, Pmode
, base_reg_rtx
,
4132 GEN_INT (gp_offset
- base_offset
)));
4135 emit_move_insn (mem_rtx
, reg_rtx
);
4137 emit_move_insn (reg_rtx
, mem_rtx
);
4140 fprintf (file
, "\t%s\t%s,%ld(%s)\n",
4141 (store_p
) ? "sw" : "lw",
4143 gp_offset
- base_offset
,
4144 reg_names
[REGNO(base_reg_rtx
)]);
4146 gp_offset
-= UNITS_PER_WORD
;
4152 base_reg_rtx
= (rtx
)0; /* Make sure these are initialzed */
4156 /* Save floating point registers if needed. */
4159 int fp_inc
= (TARGET_FLOAT64
) ? 1 : 2;
4161 /* Pick which pointer to use as a base register. */
4162 fp_offset
= current_frame_info
.fp_sp_offset
;
4163 end_offset
= fp_offset
- (current_frame_info
.fp_reg_size
- 2*UNITS_PER_WORD
);
4165 if (fp_offset
< 0 || end_offset
< 0)
4166 fatal ("fp_offset (%ld) or end_offset (%ld) is less than zero.",
4167 fp_offset
, end_offset
);
4169 else if (fp_offset
< 32768)
4171 base_reg_rtx
= stack_pointer_rtx
;
4175 else if (base_reg_rtx
!= (rtx
)0
4176 && (((unsigned long)(base_offset
- fp_offset
)) < 32768)
4177 && (((unsigned long)(base_offset
- end_offset
)) < 32768))
4179 ; /* already set up for gp registers above */
4182 else if (large_reg
!= (rtx
)0
4183 && (((unsigned long)(large_offset
- fp_offset
)) < 32768)
4184 && (((unsigned long)(large_offset
- end_offset
)) < 32768))
4186 base_reg_rtx
= gen_rtx (REG
, Pmode
, MIPS_TEMP2_REGNUM
);
4187 base_offset
= large_offset
;
4188 if (file
== (FILE *)0)
4189 emit_insn (gen_addsi3 (base_reg_rtx
, large_reg
, stack_pointer_rtx
));
4191 fprintf (file
, "\taddu\t%s,%s,%s\n",
4192 reg_names
[MIPS_TEMP2_REGNUM
],
4193 reg_names
[REGNO (large_reg
)],
4194 reg_names
[STACK_POINTER_REGNUM
]);
4199 base_reg_rtx
= gen_rtx (REG
, Pmode
, MIPS_TEMP2_REGNUM
);
4200 base_offset
= fp_offset
;
4201 if (file
== (FILE *)0)
4203 emit_move_insn (base_reg_rtx
, GEN_INT (fp_offset
));
4204 emit_insn (gen_addsi3 (base_reg_rtx
, base_reg_rtx
, stack_pointer_rtx
));
4207 fprintf (file
, "\tli\t%s,0x%.08lx\t# %ld\n\taddu\t%s,%s,%s\n",
4208 reg_names
[MIPS_TEMP2_REGNUM
],
4211 reg_names
[MIPS_TEMP2_REGNUM
],
4212 reg_names
[MIPS_TEMP2_REGNUM
],
4213 reg_names
[STACK_POINTER_REGNUM
]);
4216 for (regno
= FP_REG_LAST
-1; regno
>= FP_REG_FIRST
; regno
-= fp_inc
)
4218 if (BITSET_P (fmask
, regno
- FP_REG_FIRST
))
4220 if (file
== (FILE *)0)
4222 rtx reg_rtx
= gen_rtx (REG
, DFmode
, regno
);
4223 rtx mem_rtx
= gen_rtx (MEM
, DFmode
,
4224 gen_rtx (PLUS
, Pmode
, base_reg_rtx
,
4225 GEN_INT (fp_offset
- base_offset
)));
4228 emit_move_insn (mem_rtx
, reg_rtx
);
4230 emit_move_insn (reg_rtx
, mem_rtx
);
4233 fprintf (file
, "\t%s\t%s,%ld(%s)\n",
4234 (store_p
) ? "s.d" : "l.d",
4236 fp_offset
- base_offset
,
4237 reg_names
[REGNO(base_reg_rtx
)]);
4240 fp_offset
-= 2*UNITS_PER_WORD
;
4247 /* Set up the stack and frame (if desired) for the function. */
4250 function_prologue (file
, size
)
4254 long tsize
= current_frame_info
.total_size
;
4256 ASM_OUTPUT_SOURCE_FILENAME (file
, DECL_SOURCE_FILE (current_function_decl
));
4258 if (debug_info_level
!= DINFO_LEVEL_TERSE
)
4259 ASM_OUTPUT_SOURCE_LINE (file
, DECL_SOURCE_LINE (current_function_decl
));
4261 inside_function
= 1;
4262 fputs ("\t.ent\t", file
);
4263 assemble_name (file
, current_function_name
);
4266 assemble_name (file
, current_function_name
);
4267 fputs (":\n", file
);
4269 if (TARGET_ABICALLS
)
4271 "\t.set\tnoreorder\n\t.cpload\t%s\n\t.set\treorder\n",
4272 reg_names
[ GP_REG_FIRST
+ 25 ]);
4274 tsize
= current_frame_info
.total_size
;
4275 if (tsize
> 0 && TARGET_ABICALLS
)
4276 fprintf (file
, "\t.cprestore %d\n", tsize
+ STARTING_FRAME_OFFSET
);
4278 fprintf (file
, "\t.frame\t%s,%d,%s\t\t# vars= %d, regs= %d/%d, args = %d, extra= %d\n",
4279 reg_names
[ (frame_pointer_needed
) ? FRAME_POINTER_REGNUM
: STACK_POINTER_REGNUM
],
4281 reg_names
[31 + GP_REG_FIRST
],
4282 current_frame_info
.var_size
,
4283 current_frame_info
.num_gp
,
4284 current_frame_info
.num_fp
,
4285 current_function_outgoing_args_size
,
4286 current_frame_info
.extra_size
);
4288 fprintf (file
, "\t.mask\t0x%08lx,%d\n\t.fmask\t0x%08lx,%d\n",
4289 current_frame_info
.mask
,
4290 current_frame_info
.gp_save_offset
,
4291 current_frame_info
.fmask
,
4292 current_frame_info
.fp_save_offset
);
4296 /* Expand the prologue into a bunch of separate insns. */
4299 mips_expand_prologue ()
4303 rtx tmp_rtx
= (rtx
)0;
4304 char *arg_name
= (char *)0;
4305 tree fndecl
= current_function_decl
;
4306 tree fntype
= TREE_TYPE (fndecl
);
4307 tree fnargs
= (TREE_CODE (fntype
) != METHOD_TYPE
)
4308 ? DECL_ARGUMENTS (fndecl
)
4314 CUMULATIVE_ARGS args_so_far
;
4316 /* If struct value address is treated as the first argument, make it so. */
4317 if (aggregate_value_p (DECL_RESULT (fndecl
))
4318 && ! current_function_returns_pcc_struct
4319 && struct_value_incoming_rtx
== 0)
4321 tree type
= build_pointer_type (fntype
);
4322 tree function_result_decl
= build_decl (PARM_DECL
, NULL_TREE
, type
);
4323 DECL_ARG_TYPE (function_result_decl
) = type
;
4324 TREE_CHAIN (function_result_decl
) = fnargs
;
4325 fnargs
= function_result_decl
;
4328 /* Determine the last argument, and get its name. */
4330 INIT_CUMULATIVE_ARGS (args_so_far
, fntype
, (rtx
)0);
4331 regno
= GP_ARG_FIRST
;
4333 for (cur_arg
= fnargs
; cur_arg
!= (tree
)0; cur_arg
= next_arg
)
4335 tree type
= DECL_ARG_TYPE (cur_arg
);
4336 enum machine_mode passed_mode
= TYPE_MODE (type
);
4337 rtx entry_parm
= FUNCTION_ARG (args_so_far
,
4339 DECL_ARG_TYPE (cur_arg
),
4346 /* passed in a register, so will get homed automatically */
4347 if (GET_MODE (entry_parm
) == BLKmode
)
4348 words
= (int_size_in_bytes (type
) + 3) / 4;
4350 words
= (GET_MODE_SIZE (GET_MODE (entry_parm
)) + 3) / 4;
4352 regno
= REGNO (entry_parm
) + words
- 1;
4356 regno
= GP_ARG_LAST
+1;
4360 FUNCTION_ARG_ADVANCE (args_so_far
,
4362 DECL_ARG_TYPE (cur_arg
),
4365 next_arg
= TREE_CHAIN (cur_arg
);
4366 if (next_arg
== (tree
)0)
4368 if (DECL_NAME (cur_arg
))
4369 arg_name
= IDENTIFIER_POINTER (DECL_NAME (cur_arg
));
4375 /* In order to pass small structures by value in registers
4376 compatibly with the MIPS compiler, we need to shift the value
4377 into the high part of the register. Function_arg has encoded a
4378 PARALLEL rtx, holding a vector of adjustments to be made as the
4379 next_arg_reg variable, so we split up the insns, and emit them
4382 next_arg_reg
= FUNCTION_ARG (args_so_far
, VOIDmode
, void_type_node
, 1);
4383 if (next_arg_reg
!= (rtx
)0 && GET_CODE (next_arg_reg
) == PARALLEL
)
4385 rtvec adjust
= XVEC (next_arg_reg
, 0);
4386 int num
= GET_NUM_ELEM (adjust
);
4388 for (i
= 0; i
< num
; i
++)
4390 rtx pattern
= RTVEC_ELT (adjust
, i
);
4391 if (GET_CODE (pattern
) != SET
4392 || GET_CODE (SET_SRC (pattern
)) != ASHIFT
)
4393 abort_with_insn (pattern
, "Insn is not a shift");
4395 PUT_CODE (SET_SRC (pattern
), ASHIFTRT
);
4396 emit_insn (pattern
);
4400 /* If this function is a varargs function, store any registers that
4401 would normally hold arguments ($4 - $7) on the stack. */
4402 if ((TYPE_ARG_TYPES (fntype
) != 0
4403 && (TREE_VALUE (tree_last (TYPE_ARG_TYPES (fntype
))) != void_type_node
))
4404 || (arg_name
!= (char *)0
4405 && ((arg_name
[0] == '_' && strcmp (arg_name
, "__builtin_va_alist") == 0)
4406 || (arg_name
[0] == 'v' && strcmp (arg_name
, "va_alist") == 0))))
4408 for (; regno
<= GP_ARG_LAST
; regno
++)
4410 rtx ptr
= stack_pointer_rtx
;
4411 if (regno
!= GP_ARG_FIRST
)
4412 ptr
= gen_rtx (PLUS
, Pmode
, ptr
,
4413 GEN_INT ((regno
- GP_ARG_FIRST
) * UNITS_PER_WORD
));
4415 emit_move_insn (gen_rtx (MEM
, Pmode
, ptr
), gen_rtx (REG
, Pmode
, regno
));
4419 tsize
= compute_frame_size (get_frame_size ());
4422 rtx tsize_rtx
= GEN_INT (tsize
);
4426 tmp_rtx
= gen_rtx (REG
, SImode
, MIPS_TEMP1_REGNUM
);
4427 emit_move_insn (tmp_rtx
, tsize_rtx
);
4428 tsize_rtx
= tmp_rtx
;
4431 emit_insn (gen_subsi3 (stack_pointer_rtx
, stack_pointer_rtx
, tsize_rtx
));
4433 save_restore_insns (TRUE
, tmp_rtx
, tsize
, (FILE *)0);
4435 if (frame_pointer_needed
)
4436 emit_insn (gen_movsi (frame_pointer_rtx
, stack_pointer_rtx
));
4439 /* If we are profiling, make sure no instructions are scheduled before
4440 the call to mcount. */
4442 if (profile_flag
|| profile_block_flag
)
4443 emit_insn (gen_blockage ());
4447 /* Do any necessary cleanup after a function to restore stack, frame, and regs. */
4449 #define RA_MASK ((long) 0x80000000) /* 1 << 31 */
4452 function_epilogue (file
, size
)
4457 char *sp_str
= reg_names
[STACK_POINTER_REGNUM
];
4458 char *t1_str
= reg_names
[MIPS_TEMP1_REGNUM
];
4459 rtx epilogue_delay
= current_function_epilogue_delay_list
;
4460 int noreorder
= !TARGET_MIPS_AS
|| (epilogue_delay
!= 0);
4461 int noepilogue
= FALSE
;
4462 int load_nop
= FALSE
;
4464 rtx tmp_rtx
= (rtx
)0;
4468 /* The epilogue does not depend on any registers, but the stack
4469 registers, so we assume that if we have 1 pending nop, it can be
4470 ignored, and 2 it must be filled (2 nops occur for integer
4471 multiply and divide). */
4473 if (dslots_number_nops
> 0)
4475 if (dslots_number_nops
== 1)
4477 dslots_number_nops
= 0;
4478 dslots_load_filled
++;
4482 while (--dslots_number_nops
> 0)
4483 fputs ((set_noreorder
) ? "\tnop\n" : "\t#nop\n", asm_out_file
);
4486 if (set_noreorder
> 0 && --set_noreorder
== 0)
4487 fputs ("\t.set\treorder\n", file
);
4493 fputs ("\t.set\tat\n", file
);
4494 error ("internal gcc error: .set noat left on in epilogue");
4497 if (set_nomacro
!= 0)
4500 fputs ("\t.set\tmacro\n", file
);
4501 error ("internal gcc error: .set nomacro left on in epilogue");
4504 if (set_noreorder
!= 0)
4507 fputs ("\t.set\treorder\n", file
);
4508 error ("internal gcc error: .set noreorder left on in epilogue");
4511 if (set_volatile
!= 0)
4514 fprintf (file
, "\t#.set\tnovolatile\n", (TARGET_MIPS_AS
) ? "" : "#");
4515 error ("internal gcc error: .set volatile left on in epilogue");
4518 size
= MIPS_STACK_ALIGN (size
);
4519 tsize
= (!current_frame_info
.initialized
)
4520 ? compute_frame_size (size
)
4521 : current_frame_info
.total_size
;
4523 if (tsize
== 0 && epilogue_delay
== 0)
4525 rtx insn
= get_last_insn ();
4527 /* If the last insn was a BARRIER, we don't have to write any code
4528 because a jump (aka return) was put there. */
4529 if (GET_CODE (insn
) == NOTE
)
4530 insn
= prev_nonnote_insn (insn
);
4531 if (insn
&& GET_CODE (insn
) == BARRIER
)
4539 /* In the reload sequence, we don't need to fill the load delay
4540 slots for most of the loads, also see if we can fill the final
4541 delay slot if not otherwise filled by the reload sequence. */
4544 fprintf (file
, "\t.set\tnoreorder\n");
4548 fprintf (file
, "\tli\t%s,0x%.08lx\t# %ld\n", t1_str
, (long)tsize
, (long)tsize
);
4549 tmp_rtx
= gen_rtx (REG
, Pmode
, MIPS_TEMP1_REGNUM
);
4552 if (frame_pointer_needed
)
4553 fprintf (file
, "\tmove\t%s,%s\t\t\t# sp not trusted here\n",
4554 sp_str
, reg_names
[FRAME_POINTER_REGNUM
]);
4556 save_restore_insns (FALSE
, tmp_rtx
, tsize
, file
);
4558 load_only_r31
= (current_frame_info
.mask
== RA_MASK
4559 && current_frame_info
.fmask
== 0);
4563 /* If the only register saved is the return address, we need a
4564 nop, unless we have an instruction to put into it. Otherwise
4565 we don't since reloading multiple registers doesn't reference
4566 the register being loaded. */
4571 final_scan_insn (XEXP (epilogue_delay
, 0),
4575 1); /* nopeepholes */
4578 fprintf (file
, "\tnop\n");
4583 fprintf (file
, "\tj\t%s\n", reg_names
[GP_REG_FIRST
+ 31]);
4586 fprintf (file
, "\taddu\t%s,%s,%s\n", sp_str
, sp_str
, t1_str
);
4589 fprintf (file
, "\taddu\t%s,%s,%d\n", sp_str
, sp_str
, tsize
);
4591 else if (!load_only_r31
&& epilogue_delay
!= 0)
4592 final_scan_insn (XEXP (epilogue_delay
, 0),
4596 1); /* nopeepholes */
4598 fprintf (file
, "\t.set\treorder\n");
4604 fprintf (file
, "\taddu\t%s,%s,%s\n", sp_str
, sp_str
, t1_str
);
4607 fprintf (file
, "\taddu\t%s,%s,%d\n", sp_str
, sp_str
, tsize
);
4609 fprintf (file
, "\tj\t%s\n", reg_names
[GP_REG_FIRST
+ 31]);
4613 fputs ("\t.end\t", file
);
4614 assemble_name (file
, current_function_name
);
4619 int num_gp_regs
= current_frame_info
.gp_reg_size
/ 4;
4620 int num_fp_regs
= current_frame_info
.fp_reg_size
/ 8;
4621 int num_regs
= num_gp_regs
+ num_fp_regs
;
4622 char *name
= current_function_name
;
4627 dslots_load_total
+= num_regs
;
4630 dslots_jump_total
++;
4634 dslots_load_filled
+= num_regs
;
4636 /* If the only register saved is the return register, we
4637 can't fill this register's delay slot. */
4639 if (load_only_r31
&& epilogue_delay
== 0)
4640 dslots_load_filled
--;
4642 if (tsize
> 0 || (!load_only_r31
&& epilogue_delay
!= 0))
4643 dslots_jump_filled
++;
4647 "%-20s fp=%c leaf=%c alloca=%c setjmp=%c stack=%4ld arg=%3ld reg=%2d/%d delay=%3d/%3dL %3d/%3dJ refs=%3d/%3d/%3d",
4649 (frame_pointer_needed
) ? 'y' : 'n',
4650 ((current_frame_info
.mask
& RA_MASK
) != 0) ? 'n' : 'y',
4651 (current_function_calls_alloca
) ? 'y' : 'n',
4652 (current_function_calls_setjmp
) ? 'y' : 'n',
4653 (long)current_frame_info
.total_size
,
4654 (long)current_function_outgoing_args_size
,
4655 num_gp_regs
, num_fp_regs
,
4656 dslots_load_total
, dslots_load_filled
,
4657 dslots_jump_total
, dslots_jump_filled
,
4658 num_refs
[0], num_refs
[1], num_refs
[2]);
4660 if (HALF_PIC_NUMBER_PTRS
> prev_half_pic_ptrs
)
4662 fprintf (stderr
, " half-pic=%3d", HALF_PIC_NUMBER_PTRS
- prev_half_pic_ptrs
);
4663 prev_half_pic_ptrs
= HALF_PIC_NUMBER_PTRS
;
4666 if (HALF_PIC_NUMBER_REFS
> prev_half_pic_refs
)
4668 fprintf (stderr
, " pic-ref=%3d", HALF_PIC_NUMBER_REFS
- prev_half_pic_refs
);
4669 prev_half_pic_refs
= HALF_PIC_NUMBER_REFS
;
4672 fputc ('\n', stderr
);
4675 /* Reset state info for each function. */
4676 inside_function
= FALSE
;
4677 ignore_line_number
= FALSE
;
4678 dslots_load_total
= 0;
4679 dslots_jump_total
= 0;
4680 dslots_load_filled
= 0;
4681 dslots_jump_filled
= 0;
4685 mips_load_reg
= (rtx
)0;
4686 mips_load_reg2
= (rtx
)0;
4687 current_frame_info
= zero_frame_info
;
4689 /* Restore the output file if optimizing the GP (optimizing the GP causes
4690 the text to be diverted to a tempfile, so that data decls come before
4691 references to the data). */
4694 asm_out_file
= asm_out_data_file
;
4698 /* Expand the epilogue into a bunch of separate insns. */
4701 mips_expand_epilogue ()
4703 long tsize
= current_frame_info
.total_size
;
4704 rtx tsize_rtx
= GEN_INT (tsize
);
4705 rtx tmp_rtx
= (rtx
)0;
4709 tmp_rtx
= gen_rtx (REG
, SImode
, MIPS_TEMP1_REGNUM
);
4710 emit_move_insn (tmp_rtx
, tsize_rtx
);
4711 tsize_rtx
= tmp_rtx
;
4716 if (frame_pointer_needed
)
4717 emit_insn (gen_movsi (stack_pointer_rtx
, frame_pointer_rtx
));
4719 save_restore_insns (FALSE
, tmp_rtx
, tsize
, (FILE *)0);
4721 emit_insn (gen_addsi3 (stack_pointer_rtx
, stack_pointer_rtx
, tsize_rtx
));
4724 emit_jump_insn (gen_return_internal (gen_rtx (REG
, Pmode
, GP_REG_FIRST
+31)));
4728 /* Define the number of delay slots needed for the function epilogue.
4730 On the mips, we need a slot if either no stack has been allocated,
4731 or the only register saved is the return register. */
4734 mips_epilogue_delay_slots ()
4736 if (!current_frame_info
.initialized
)
4737 (void) compute_frame_size (get_frame_size ());
4739 if (current_frame_info
.total_size
== 0)
4742 if (current_frame_info
.mask
== RA_MASK
&& current_frame_info
.fmask
== 0)
4749 /* Return true if this function is known to have a null epilogue.
4750 This allows the optimizer to omit jumps to jumps if no stack
4754 simple_epilogue_p ()
4756 if (!reload_completed
)
4759 if (current_frame_info
.initialized
)
4760 return current_frame_info
.total_size
== 0;
4762 return (compute_frame_size (get_frame_size ())) == 0;