projects / gcc.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
mips.h (target_flags_explicit): Declare for GENERATOR_FILE.
[gcc.git] / gcc / config / mips / mips.h
1 /* Definitions of target machine for GNU compiler. MIPS version.
2 Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
3 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009, 2010
4 Free Software Foundation, Inc.
5 Contributed by A. Lichnewsky (lich@inria.inria.fr).
6 Changed by Michael Meissner (meissner@osf.org).
7 64-bit r4000 support by Ian Lance Taylor (ian@cygnus.com) and
8 Brendan Eich (brendan@microunity.com).
9
10 This file is part of GCC.
11
12 GCC is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3, or (at your option)
15 any later version.
16
17 GCC is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with GCC; see the file COPYING3. If not see
24 <http://www.gnu.org/licenses/>. */
25
26
27 #include "config/vxworks-dummy.h"
28
29 #ifdef GENERATOR_FILE
30 /* This is used in some insn conditions, so needs to be declared, but
31 does not need to be defined. */
32 extern int target_flags_explicit;
33 #endif
34
35 /* MIPS external variables defined in mips.c. */
36
37 /* Which ABI to use. ABI_32 (original 32, or o32), ABI_N32 (n32),
38 ABI_64 (n64) are all defined by SGI. ABI_O64 is o32 extended
39 to work on a 64-bit machine. */
40
41 #define ABI_32 0
42 #define ABI_N32 1
43 #define ABI_64 2
44 #define ABI_EABI 3
45 #define ABI_O64 4
46
47 /* Masks that affect tuning.
48
49 PTF_AVOID_BRANCHLIKELY
50 Set if it is usually not profitable to use branch-likely instructions
51 for this target, typically because the branches are always predicted
52 taken and so incur a large overhead when not taken. */
53 #define PTF_AVOID_BRANCHLIKELY 0x1
54
55 /* Information about one recognized processor. Defined here for the
56 benefit of TARGET_CPU_CPP_BUILTINS. */
57 struct mips_cpu_info {
58 /* The 'canonical' name of the processor as far as GCC is concerned.
59 It's typically a manufacturer's prefix followed by a numerical
60 designation. It should be lowercase. */
61 const char *name;
62
63 /* The internal processor number that most closely matches this
64 entry. Several processors can have the same value, if there's no
65 difference between them from GCC's point of view. */
66 enum processor cpu;
67
68 /* The ISA level that the processor implements. */
69 int isa;
70
71 /* A mask of PTF_* values. */
72 unsigned int tune_flags;
73 };
74
75 /* Enumerates the setting of the -mcode-readable option. */
76 enum mips_code_readable_setting {
77 CODE_READABLE_NO,
78 CODE_READABLE_PCREL,
79 CODE_READABLE_YES
80 };
81
82 /* Macros to silence warnings about numbers being signed in traditional
83 C and unsigned in ISO C when compiled on 32-bit hosts. */
84
85 #define BITMASK_HIGH (((unsigned long)1) << 31) /* 0x80000000 */
86 #define BITMASK_UPPER16 ((unsigned long)0xffff << 16) /* 0xffff0000 */
87 #define BITMASK_LOWER16 ((unsigned long)0xffff) /* 0x0000ffff */
88
89 \f
90 /* Run-time compilation parameters selecting different hardware subsets. */
91
92 /* True if we are generating position-independent VxWorks RTP code. */
93 #define TARGET_RTP_PIC (TARGET_VXWORKS_RTP && flag_pic)
94
95 /* True if the output file is marked as ".abicalls; .option pic0"
96 (-call_nonpic). */
97 #define TARGET_ABICALLS_PIC0 \
98 (TARGET_ABSOLUTE_ABICALLS && TARGET_PLT)
99
100 /* True if the output file is marked as ".abicalls; .option pic2" (-KPIC). */
101 #define TARGET_ABICALLS_PIC2 \
102 (TARGET_ABICALLS && !TARGET_ABICALLS_PIC0)
103
104 /* True if the call patterns should be split into a jalr followed by
105 an instruction to restore $gp. It is only safe to split the load
106 from the call when every use of $gp is explicit.
107
108 See mips_must_initialize_gp_p for details about how we manage the
109 global pointer. */
110
111 #define TARGET_SPLIT_CALLS \
112 (TARGET_EXPLICIT_RELOCS && TARGET_CALL_CLOBBERED_GP && epilogue_completed)
113
114 /* True if we're generating a form of -mabicalls in which we can use
115 operators like %hi and %lo to refer to locally-binding symbols.
116 We can only do this for -mno-shared, and only then if we can use
117 relocation operations instead of assembly macros. It isn't really
118 worth using absolute sequences for 64-bit symbols because GOT
119 accesses are so much shorter. */
120
121 #define TARGET_ABSOLUTE_ABICALLS \
122 (TARGET_ABICALLS \
123 && !TARGET_SHARED \
124 && TARGET_EXPLICIT_RELOCS \
125 && !ABI_HAS_64BIT_SYMBOLS)
126
127 /* True if we can optimize sibling calls. For simplicity, we only
128 handle cases in which call_insn_operand will reject invalid
129 sibcall addresses. There are two cases in which this isn't true:
130
131 - TARGET_MIPS16. call_insn_operand accepts constant addresses
132 but there is no direct jump instruction. It isn't worth
133 using sibling calls in this case anyway; they would usually
134 be longer than normal calls.
135
136 - TARGET_USE_GOT && !TARGET_EXPLICIT_RELOCS. call_insn_operand
137 accepts global constants, but all sibcalls must be indirect. */
138 #define TARGET_SIBCALLS \
139 (!TARGET_MIPS16 && (!TARGET_USE_GOT || TARGET_EXPLICIT_RELOCS))
140
141 /* True if we need to use a global offset table to access some symbols. */
142 #define TARGET_USE_GOT (TARGET_ABICALLS || TARGET_RTP_PIC)
143
144 /* True if TARGET_USE_GOT and if $gp is a call-clobbered register. */
145 #define TARGET_CALL_CLOBBERED_GP (TARGET_ABICALLS && TARGET_OLDABI)
146
147 /* True if TARGET_USE_GOT and if $gp is a call-saved register. */
148 #define TARGET_CALL_SAVED_GP (TARGET_USE_GOT && !TARGET_CALL_CLOBBERED_GP)
149
150 /* True if we should use .cprestore to store to the cprestore slot.
151
152 We continue to use .cprestore for explicit-reloc code so that JALs
153 inside inline asms will work correctly. */
154 #define TARGET_CPRESTORE_DIRECTIVE \
155 (TARGET_ABICALLS_PIC2 && !TARGET_MIPS16)
156
157 /* True if we can use the J and JAL instructions. */
158 #define TARGET_ABSOLUTE_JUMPS \
159 (!flag_pic || TARGET_ABSOLUTE_ABICALLS)
160
161 /* True if indirect calls must use register class PIC_FN_ADDR_REG.
162 This is true for both the PIC and non-PIC VxWorks RTP modes. */
163 #define TARGET_USE_PIC_FN_ADDR_REG (TARGET_ABICALLS || TARGET_VXWORKS_RTP)
164
165 /* True if .gpword or .gpdword should be used for switch tables.
166
167 Although GAS does understand .gpdword, the SGI linker mishandles
168 the relocations GAS generates (R_MIPS_GPREL32 followed by R_MIPS_64).
169 We therefore disable GP-relative switch tables for n64 on IRIX targets. */
170 #define TARGET_GPWORD \
171 (TARGET_ABICALLS \
172 && !TARGET_ABSOLUTE_ABICALLS \
173 && !(mips_abi == ABI_64 && TARGET_IRIX6))
174
175 /* True if the output must have a writable .eh_frame.
176 See ASM_PREFERRED_EH_DATA_FORMAT for details. */
177 #ifdef HAVE_LD_PERSONALITY_RELAXATION
178 #define TARGET_WRITABLE_EH_FRAME 0
179 #else
180 #define TARGET_WRITABLE_EH_FRAME (flag_pic && TARGET_SHARED)
181 #endif
182
183 /* Generate mips16 code */
184 #define TARGET_MIPS16 ((target_flags & MASK_MIPS16) != 0)
185 /* Generate mips16e code. Default 16bit ASE for mips32* and mips64* */
186 #define GENERATE_MIPS16E (TARGET_MIPS16 && mips_isa >= 32)
187 /* Generate mips16e register save/restore sequences. */
188 #define GENERATE_MIPS16E_SAVE_RESTORE (GENERATE_MIPS16E && mips_abi == ABI_32)
189
190 /* True if we're generating a form of MIPS16 code in which general
191 text loads are allowed. */
192 #define TARGET_MIPS16_TEXT_LOADS \
193 (TARGET_MIPS16 && mips_code_readable == CODE_READABLE_YES)
194
195 /* True if we're generating a form of MIPS16 code in which PC-relative
196 loads are allowed. */
197 #define TARGET_MIPS16_PCREL_LOADS \
198 (TARGET_MIPS16 && mips_code_readable >= CODE_READABLE_PCREL)
199
200 /* Generic ISA defines. */
201 #define ISA_MIPS1 (mips_isa == 1)
202 #define ISA_MIPS2 (mips_isa == 2)
203 #define ISA_MIPS3 (mips_isa == 3)
204 #define ISA_MIPS4 (mips_isa == 4)
205 #define ISA_MIPS32 (mips_isa == 32)
206 #define ISA_MIPS32R2 (mips_isa == 33)
207 #define ISA_MIPS64 (mips_isa == 64)
208 #define ISA_MIPS64R2 (mips_isa == 65)
209
210 /* Architecture target defines. */
211 #define TARGET_LOONGSON_2E (mips_arch == PROCESSOR_LOONGSON_2E)
212 #define TARGET_LOONGSON_2F (mips_arch == PROCESSOR_LOONGSON_2F)
213 #define TARGET_LOONGSON_2EF (TARGET_LOONGSON_2E || TARGET_LOONGSON_2F)
214 #define TARGET_MIPS3900 (mips_arch == PROCESSOR_R3900)
215 #define TARGET_MIPS4000 (mips_arch == PROCESSOR_R4000)
216 #define TARGET_MIPS4120 (mips_arch == PROCESSOR_R4120)
217 #define TARGET_MIPS4130 (mips_arch == PROCESSOR_R4130)
218 #define TARGET_MIPS5400 (mips_arch == PROCESSOR_R5400)
219 #define TARGET_MIPS5500 (mips_arch == PROCESSOR_R5500)
220 #define TARGET_MIPS7000 (mips_arch == PROCESSOR_R7000)
221 #define TARGET_MIPS9000 (mips_arch == PROCESSOR_R9000)
222 #define TARGET_OCTEON (mips_arch == PROCESSOR_OCTEON)
223 #define TARGET_SB1 (mips_arch == PROCESSOR_SB1 \
224 || mips_arch == PROCESSOR_SB1A)
225 #define TARGET_SR71K (mips_arch == PROCESSOR_SR71000)
226
227 /* Scheduling target defines. */
228 #define TUNE_20KC (mips_tune == PROCESSOR_20KC)
229 #define TUNE_24K (mips_tune == PROCESSOR_24KC \
230 || mips_tune == PROCESSOR_24KF2_1 \
231 || mips_tune == PROCESSOR_24KF1_1)
232 #define TUNE_74K (mips_tune == PROCESSOR_74KC \
233 || mips_tune == PROCESSOR_74KF2_1 \
234 || mips_tune == PROCESSOR_74KF1_1 \
235 || mips_tune == PROCESSOR_74KF3_2)
236 #define TUNE_LOONGSON_2EF (mips_tune == PROCESSOR_LOONGSON_2E \
237 || mips_tune == PROCESSOR_LOONGSON_2F)
238 #define TUNE_MIPS3000 (mips_tune == PROCESSOR_R3000)
239 #define TUNE_MIPS3900 (mips_tune == PROCESSOR_R3900)
240 #define TUNE_MIPS4000 (mips_tune == PROCESSOR_R4000)
241 #define TUNE_MIPS4120 (mips_tune == PROCESSOR_R4120)
242 #define TUNE_MIPS4130 (mips_tune == PROCESSOR_R4130)
243 #define TUNE_MIPS5000 (mips_tune == PROCESSOR_R5000)
244 #define TUNE_MIPS5400 (mips_tune == PROCESSOR_R5400)
245 #define TUNE_MIPS5500 (mips_tune == PROCESSOR_R5500)
246 #define TUNE_MIPS6000 (mips_tune == PROCESSOR_R6000)
247 #define TUNE_MIPS7000 (mips_tune == PROCESSOR_R7000)
248 #define TUNE_MIPS9000 (mips_tune == PROCESSOR_R9000)
249 #define TUNE_OCTEON (mips_tune == PROCESSOR_OCTEON)
250 #define TUNE_SB1 (mips_tune == PROCESSOR_SB1 \
251 || mips_tune == PROCESSOR_SB1A)
252
253 /* Whether vector modes and intrinsics for ST Microelectronics
254 Loongson-2E/2F processors should be enabled. In o32 pairs of
255 floating-point registers provide 64-bit values. */
256 #define TARGET_LOONGSON_VECTORS (TARGET_HARD_FLOAT_ABI \
257 && TARGET_LOONGSON_2EF)
258
259 /* True if the pre-reload scheduler should try to create chains of
260 multiply-add or multiply-subtract instructions. For example,
261 suppose we have:
262
263 t1 = a * b
264 t2 = t1 + c * d
265 t3 = e * f
266 t4 = t3 - g * h
267
268 t1 will have a higher priority than t2 and t3 will have a higher
269 priority than t4. However, before reload, there is no dependence
270 between t1 and t3, and they can often have similar priorities.
271 The scheduler will then tend to prefer:
272
273 t1 = a * b
274 t3 = e * f
275 t2 = t1 + c * d
276 t4 = t3 - g * h
277
278 which stops us from making full use of macc/madd-style instructions.
279 This sort of situation occurs frequently in Fourier transforms and
280 in unrolled loops.
281
282 To counter this, the TUNE_MACC_CHAINS code will reorder the ready
283 queue so that chained multiply-add and multiply-subtract instructions
284 appear ahead of any other instruction that is likely to clobber lo.
285 In the example above, if t2 and t3 become ready at the same time,
286 the code ensures that t2 is scheduled first.
287
288 Multiply-accumulate instructions are a bigger win for some targets
289 than others, so this macro is defined on an opt-in basis. */
290 #define TUNE_MACC_CHAINS (TUNE_MIPS5500 \
291 || TUNE_MIPS4120 \
292 || TUNE_MIPS4130 \
293 || TUNE_24K)
294
295 #define TARGET_OLDABI (mips_abi == ABI_32 || mips_abi == ABI_O64)
296 #define TARGET_NEWABI (mips_abi == ABI_N32 || mips_abi == ABI_64)
297
298 /* TARGET_HARD_FLOAT and TARGET_SOFT_FLOAT reflect whether the FPU is
299 directly accessible, while the command-line options select
300 TARGET_HARD_FLOAT_ABI and TARGET_SOFT_FLOAT_ABI to reflect the ABI
301 in use. */
302 #define TARGET_HARD_FLOAT (TARGET_HARD_FLOAT_ABI && !TARGET_MIPS16)
303 #define TARGET_SOFT_FLOAT (TARGET_SOFT_FLOAT_ABI || TARGET_MIPS16)
304
305 /* False if SC acts as a memory barrier with respect to itself,
306 otherwise a SYNC will be emitted after SC for atomic operations
307 that require ordering between the SC and following loads and
308 stores. It does not tell anything about ordering of loads and
309 stores prior to and following the SC, only about the SC itself and
310 those loads and stores follow it. */
311 #define TARGET_SYNC_AFTER_SC (!TARGET_OCTEON)
312
313 /* IRIX specific stuff. */
314 #define TARGET_IRIX6 0
315
316 /* Define preprocessor macros for the -march and -mtune options.
317 PREFIX is either _MIPS_ARCH or _MIPS_TUNE, INFO is the selected
318 processor. If INFO's canonical name is "foo", define PREFIX to
319 be "foo", and define an additional macro PREFIX_FOO. */
320 #define MIPS_CPP_SET_PROCESSOR(PREFIX, INFO) \
321 do \
322 { \
323 char *macro, *p; \
324 \
325 macro = concat ((PREFIX), "_", (INFO)->name, NULL); \
326 for (p = macro; *p != 0; p++) \
327 *p = TOUPPER (*p); \
328 \
329 builtin_define (macro); \
330 builtin_define_with_value ((PREFIX), (INFO)->name, 1); \
331 free (macro); \
332 } \
333 while (0)
334
335 /* Target CPU builtins. */
336 #define TARGET_CPU_CPP_BUILTINS() \
337 do \
338 { \
339 /* Everyone but IRIX defines this to mips. */ \
340 if (!TARGET_IRIX6) \
341 builtin_assert ("machine=mips"); \
342 \
343 builtin_assert ("cpu=mips"); \
344 builtin_define ("__mips__"); \
345 builtin_define ("_mips"); \
346 \
347 /* We do this here because __mips is defined below and so we \
348 can't use builtin_define_std. We don't ever want to define \
349 "mips" for VxWorks because some of the VxWorks headers \
350 construct include filenames from a root directory macro, \
351 an architecture macro and a filename, where the architecture \
352 macro expands to 'mips'. If we define 'mips' to 1, the \
353 architecture macro expands to 1 as well. */ \
354 if (!flag_iso && !TARGET_VXWORKS) \
355 builtin_define ("mips"); \
356 \
357 if (TARGET_64BIT) \
358 builtin_define ("__mips64"); \
359 \
360 if (!TARGET_IRIX6) \
361 { \
362 /* Treat _R3000 and _R4000 like register-size \
363 defines, which is how they've historically \
364 been used. */ \
365 if (TARGET_64BIT) \
366 { \
367 builtin_define_std ("R4000"); \
368 builtin_define ("_R4000"); \
369 } \
370 else \
371 { \
372 builtin_define_std ("R3000"); \
373 builtin_define ("_R3000"); \
374 } \
375 } \
376 if (TARGET_FLOAT64) \
377 builtin_define ("__mips_fpr=64"); \
378 else \
379 builtin_define ("__mips_fpr=32"); \
380 \
381 if (mips_base_mips16) \
382 builtin_define ("__mips16"); \
383 \
384 if (TARGET_MIPS3D) \
385 builtin_define ("__mips3d"); \
386 \
387 if (TARGET_SMARTMIPS) \
388 builtin_define ("__mips_smartmips"); \
389 \
390 if (TARGET_DSP) \
391 { \
392 builtin_define ("__mips_dsp"); \
393 if (TARGET_DSPR2) \
394 { \
395 builtin_define ("__mips_dspr2"); \
396 builtin_define ("__mips_dsp_rev=2"); \
397 } \
398 else \
399 builtin_define ("__mips_dsp_rev=1"); \
400 } \
401 \
402 MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
403 MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
404 \
405 if (ISA_MIPS1) \
406 { \
407 builtin_define ("__mips=1"); \
408 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS1"); \
409 } \
410 else if (ISA_MIPS2) \
411 { \
412 builtin_define ("__mips=2"); \
413 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS2"); \
414 } \
415 else if (ISA_MIPS3) \
416 { \
417 builtin_define ("__mips=3"); \
418 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS3"); \
419 } \
420 else if (ISA_MIPS4) \
421 { \
422 builtin_define ("__mips=4"); \
423 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS4"); \
424 } \
425 else if (ISA_MIPS32) \
426 { \
427 builtin_define ("__mips=32"); \
428 builtin_define ("__mips_isa_rev=1"); \
429 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
430 } \
431 else if (ISA_MIPS32R2) \
432 { \
433 builtin_define ("__mips=32"); \
434 builtin_define ("__mips_isa_rev=2"); \
435 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS32"); \
436 } \
437 else if (ISA_MIPS64) \
438 { \
439 builtin_define ("__mips=64"); \
440 builtin_define ("__mips_isa_rev=1"); \
441 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
442 } \
443 else if (ISA_MIPS64R2) \
444 { \
445 builtin_define ("__mips=64"); \
446 builtin_define ("__mips_isa_rev=2"); \
447 builtin_define ("_MIPS_ISA=_MIPS_ISA_MIPS64"); \
448 } \
449 \
450 switch (mips_abi) \
451 { \
452 case ABI_32: \
453 builtin_define ("_ABIO32=1"); \
454 builtin_define ("_MIPS_SIM=_ABIO32"); \
455 break; \
456 \
457 case ABI_N32: \
458 builtin_define ("_ABIN32=2"); \
459 builtin_define ("_MIPS_SIM=_ABIN32"); \
460 break; \
461 \
462 case ABI_64: \
463 builtin_define ("_ABI64=3"); \
464 builtin_define ("_MIPS_SIM=_ABI64"); \
465 break; \
466 \
467 case ABI_O64: \
468 builtin_define ("_ABIO64=4"); \
469 builtin_define ("_MIPS_SIM=_ABIO64"); \
470 break; \
471 } \
472 \
473 builtin_define_with_int_value ("_MIPS_SZINT", INT_TYPE_SIZE); \
474 builtin_define_with_int_value ("_MIPS_SZLONG", LONG_TYPE_SIZE); \
475 builtin_define_with_int_value ("_MIPS_SZPTR", POINTER_SIZE); \
476 builtin_define_with_int_value ("_MIPS_FPSET", \
477 32 / MAX_FPRS_PER_FMT); \
478 \
479 /* These defines reflect the ABI in use, not whether the \
480 FPU is directly accessible. */ \
481 if (TARGET_NO_FLOAT) \
482 builtin_define ("__mips_no_float"); \
483 else if (TARGET_HARD_FLOAT_ABI) \
484 builtin_define ("__mips_hard_float"); \
485 else \
486 builtin_define ("__mips_soft_float"); \
487 \
488 if (TARGET_SINGLE_FLOAT) \
489 builtin_define ("__mips_single_float"); \
490 \
491 if (TARGET_PAIRED_SINGLE_FLOAT) \
492 builtin_define ("__mips_paired_single_float"); \
493 \
494 if (TARGET_BIG_ENDIAN) \
495 { \
496 builtin_define_std ("MIPSEB"); \
497 builtin_define ("_MIPSEB"); \
498 } \
499 else \
500 { \
501 builtin_define_std ("MIPSEL"); \
502 builtin_define ("_MIPSEL"); \
503 } \
504 \
505 /* Whether calls should go through $25. The separate __PIC__ \
506 macro indicates whether abicalls code might use a GOT. */ \
507 if (TARGET_ABICALLS) \
508 builtin_define ("__mips_abicalls"); \
509 \
510 /* Whether Loongson vector modes are enabled. */ \
511 if (TARGET_LOONGSON_VECTORS) \
512 builtin_define ("__mips_loongson_vector_rev"); \
513 \
514 /* Historical Octeon macro. */ \
515 if (TARGET_OCTEON) \
516 builtin_define ("__OCTEON__"); \
517 \
518 /* Macros dependent on the C dialect. */ \
519 if (preprocessing_asm_p ()) \
520 { \
521 builtin_define_std ("LANGUAGE_ASSEMBLY"); \
522 builtin_define ("_LANGUAGE_ASSEMBLY"); \
523 } \
524 else if (c_dialect_cxx ()) \
525 { \
526 builtin_define ("_LANGUAGE_C_PLUS_PLUS"); \
527 builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \
528 builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \
529 } \
530 else \
531 { \
532 builtin_define_std ("LANGUAGE_C"); \
533 builtin_define ("_LANGUAGE_C"); \
534 } \
535 if (c_dialect_objc ()) \
536 { \
537 builtin_define ("_LANGUAGE_OBJECTIVE_C"); \
538 builtin_define ("__LANGUAGE_OBJECTIVE_C"); \
539 /* Bizarre, but needed at least for Irix. */ \
540 builtin_define_std ("LANGUAGE_C"); \
541 builtin_define ("_LANGUAGE_C"); \
542 } \
543 \
544 if (mips_abi == ABI_EABI) \
545 builtin_define ("__mips_eabi"); \
546 \
547 if (TARGET_CACHE_BUILTIN) \
548 builtin_define ("__GCC_HAVE_BUILTIN_MIPS_CACHE"); \
549 } \
550 while (0)
551
552 /* Default target_flags if no switches are specified */
553
554 #ifndef TARGET_DEFAULT
555 #define TARGET_DEFAULT 0
556 #endif
557
558 #ifndef TARGET_CPU_DEFAULT
559 #define TARGET_CPU_DEFAULT 0
560 #endif
561
562 #ifndef TARGET_ENDIAN_DEFAULT
563 #define TARGET_ENDIAN_DEFAULT MASK_BIG_ENDIAN
564 #endif
565
566 #ifndef TARGET_FP_EXCEPTIONS_DEFAULT
567 #define TARGET_FP_EXCEPTIONS_DEFAULT MASK_FP_EXCEPTIONS
568 #endif
569
570 /* 'from-abi' makes a good default: you get whatever the ABI requires. */
571 #ifndef MIPS_ISA_DEFAULT
572 #ifndef MIPS_CPU_STRING_DEFAULT
573 #define MIPS_CPU_STRING_DEFAULT "from-abi"
574 #endif
575 #endif
576
577 #ifdef IN_LIBGCC2
578 #undef TARGET_64BIT
579 /* Make this compile time constant for libgcc2 */
580 #ifdef __mips64
581 #define TARGET_64BIT 1
582 #else
583 #define TARGET_64BIT 0
584 #endif
585 #endif /* IN_LIBGCC2 */
586
587 /* Force the call stack unwinders in unwind.inc not to be MIPS16 code
588 when compiled with hardware floating point. This is because MIPS16
589 code cannot save and restore the floating-point registers, which is
590 important if in a mixed MIPS16/non-MIPS16 environment. */
591
592 #ifdef IN_LIBGCC2
593 #if __mips_hard_float
594 #define LIBGCC2_UNWIND_ATTRIBUTE __attribute__((__nomips16__))
595 #endif
596 #endif /* IN_LIBGCC2 */
597
598 #define TARGET_LIBGCC_SDATA_SECTION ".sdata"
599
600 #ifndef MULTILIB_ENDIAN_DEFAULT
601 #if TARGET_ENDIAN_DEFAULT == 0
602 #define MULTILIB_ENDIAN_DEFAULT "EL"
603 #else
604 #define MULTILIB_ENDIAN_DEFAULT "EB"
605 #endif
606 #endif
607
608 #ifndef MULTILIB_ISA_DEFAULT
609 # if MIPS_ISA_DEFAULT == 1
610 # define MULTILIB_ISA_DEFAULT "mips1"
611 # else
612 # if MIPS_ISA_DEFAULT == 2
613 # define MULTILIB_ISA_DEFAULT "mips2"
614 # else
615 # if MIPS_ISA_DEFAULT == 3
616 # define MULTILIB_ISA_DEFAULT "mips3"
617 # else
618 # if MIPS_ISA_DEFAULT == 4
619 # define MULTILIB_ISA_DEFAULT "mips4"
620 # else
621 # if MIPS_ISA_DEFAULT == 32
622 # define MULTILIB_ISA_DEFAULT "mips32"
623 # else
624 # if MIPS_ISA_DEFAULT == 33
625 # define MULTILIB_ISA_DEFAULT "mips32r2"
626 # else
627 # if MIPS_ISA_DEFAULT == 64
628 # define MULTILIB_ISA_DEFAULT "mips64"
629 # else
630 # if MIPS_ISA_DEFAULT == 65
631 # define MULTILIB_ISA_DEFAULT "mips64r2"
632 # else
633 # define MULTILIB_ISA_DEFAULT "mips1"
634 # endif
635 # endif
636 # endif
637 # endif
638 # endif
639 # endif
640 # endif
641 # endif
642 #endif
643
644 #ifndef MIPS_ABI_DEFAULT
645 #define MIPS_ABI_DEFAULT ABI_32
646 #endif
647
648 /* Use the most portable ABI flag for the ASM specs. */
649
650 #if MIPS_ABI_DEFAULT == ABI_32
651 #define MULTILIB_ABI_DEFAULT "mabi=32"
652 #endif
653
654 #if MIPS_ABI_DEFAULT == ABI_O64
655 #define MULTILIB_ABI_DEFAULT "mabi=o64"
656 #endif
657
658 #if MIPS_ABI_DEFAULT == ABI_N32
659 #define MULTILIB_ABI_DEFAULT "mabi=n32"
660 #endif
661
662 #if MIPS_ABI_DEFAULT == ABI_64
663 #define MULTILIB_ABI_DEFAULT "mabi=64"
664 #endif
665
666 #if MIPS_ABI_DEFAULT == ABI_EABI
667 #define MULTILIB_ABI_DEFAULT "mabi=eabi"
668 #endif
669
670 #ifndef MULTILIB_DEFAULTS
671 #define MULTILIB_DEFAULTS \
672 { MULTILIB_ENDIAN_DEFAULT, MULTILIB_ISA_DEFAULT, MULTILIB_ABI_DEFAULT }
673 #endif
674
675 /* We must pass -EL to the linker by default for little endian embedded
676 targets using linker scripts with a OUTPUT_FORMAT line. Otherwise, the
677 linker will default to using big-endian output files. The OUTPUT_FORMAT
678 line must be in the linker script, otherwise -EB/-EL will not work. */
679
680 #ifndef ENDIAN_SPEC
681 #if TARGET_ENDIAN_DEFAULT == 0
682 #define ENDIAN_SPEC "%{!EB:%{!meb:-EL}} %{EB|meb:-EB}"
683 #else
684 #define ENDIAN_SPEC "%{!EL:%{!mel:-EB}} %{EL|mel:-EL}"
685 #endif
686 #endif
687
688 /* A spec condition that matches all non-mips16 -mips arguments. */
689
690 #define MIPS_ISA_LEVEL_OPTION_SPEC \
691 "mips1|mips2|mips3|mips4|mips32*|mips64*"
692
693 /* A spec condition that matches all non-mips16 architecture arguments. */
694
695 #define MIPS_ARCH_OPTION_SPEC \
696 MIPS_ISA_LEVEL_OPTION_SPEC "|march=*"
697
698 /* A spec that infers a -mips argument from an -march argument,
699 or injects the default if no architecture is specified. */
700
701 #define MIPS_ISA_LEVEL_SPEC \
702 "%{" MIPS_ISA_LEVEL_OPTION_SPEC ":;: \
703 %{march=mips1|march=r2000|march=r3000|march=r3900:-mips1} \
704 %{march=mips2|march=r6000:-mips2} \
705 %{march=mips3|march=r4*|march=vr4*|march=orion|march=loongson2*:-mips3} \
706 %{march=mips4|march=r8000|march=vr5*|march=rm7000|march=rm9000 \
707 |march=r10000|march=r12000|march=r14000|march=r16000:-mips4} \
708 %{march=mips32|march=4kc|march=4km|march=4kp|march=4ksc:-mips32} \
709 %{march=mips32r2|march=m4k|march=4ke*|march=4ksd|march=24k* \
710 |march=34k*|march=74k*|march=1004k*: -mips32r2} \
711 %{march=mips64|march=5k*|march=20k*|march=sb1*|march=sr71000 \
712 |march=xlr: -mips64} \
713 %{march=mips64r2|march=octeon: -mips64r2} \
714 %{!march=*: -" MULTILIB_ISA_DEFAULT "}}"
715
716 /* A spec that infers a -mhard-float or -msoft-float setting from an
717 -march argument. Note that soft-float and hard-float code are not
718 link-compatible. */
719
720 #define MIPS_ARCH_FLOAT_SPEC \
721 "%{mhard-float|msoft-float|march=mips*:; \
722 march=vr41*|march=m4k|march=4k*|march=24kc|march=24kec \
723 |march=34kc|march=74kc|march=1004kc|march=5kc \
724 |march=octeon|march=xlr: -msoft-float; \
725 march=*: -mhard-float}"
726
727 /* A spec condition that matches 32-bit options. It only works if
728 MIPS_ISA_LEVEL_SPEC has been applied. */
729
730 #define MIPS_32BIT_OPTION_SPEC \
731 "mips1|mips2|mips32*|mgp32"
732
733 #if MIPS_ABI_DEFAULT == ABI_O64 \
734 || MIPS_ABI_DEFAULT == ABI_N32 \
735 || MIPS_ABI_DEFAULT == ABI_64
736 #define OPT_ARCH64 "mabi=32|mgp32:;"
737 #define OPT_ARCH32 "mabi=32|mgp32"
738 #else
739 #define OPT_ARCH64 "mabi=o64|mabi=n32|mabi=64|mgp64"
740 #define OPT_ARCH32 "mabi=o64|mabi=n32|mabi=64|mgp64:;"
741 #endif
742
743 /* Support for a compile-time default CPU, et cetera. The rules are:
744 --with-arch is ignored if -march is specified or a -mips is specified
745 (other than -mips16); likewise --with-arch-32 and --with-arch-64.
746 --with-tune is ignored if -mtune is specified; likewise
747 --with-tune-32 and --with-tune-64.
748 --with-abi is ignored if -mabi is specified.
749 --with-float is ignored if -mhard-float or -msoft-float are
750 specified.
751 --with-divide is ignored if -mdivide-traps or -mdivide-breaks are
752 specified. */
753 #define OPTION_DEFAULT_SPECS \
754 {"arch", "%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}" }, \
755 {"arch_32", "%{" OPT_ARCH32 ":%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}}" }, \
756 {"arch_64", "%{" OPT_ARCH64 ":%{" MIPS_ARCH_OPTION_SPEC ":;: -march=%(VALUE)}}" }, \
757 {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
758 {"tune_32", "%{" OPT_ARCH32 ":%{!mtune=*:-mtune=%(VALUE)}}" }, \
759 {"tune_64", "%{" OPT_ARCH64 ":%{!mtune=*:-mtune=%(VALUE)}}" }, \
760 {"abi", "%{!mabi=*:-mabi=%(VALUE)}" }, \
761 {"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }, \
762 {"divide", "%{!mdivide-traps:%{!mdivide-breaks:-mdivide-%(VALUE)}}" }, \
763 {"llsc", "%{!mllsc:%{!mno-llsc:-m%(VALUE)}}" }, \
764 {"mips-plt", "%{!mplt:%{!mno-plt:-m%(VALUE)}}" }, \
765 {"synci", "%{!msynci:%{!mno-synci:-m%(VALUE)}}" }
766
767
768 /* A spec that infers the -mdsp setting from an -march argument. */
769 #define BASE_DRIVER_SELF_SPECS \
770 "%{!mno-dsp: \
771 %{march=24ke*|march=34k*|march=1004k*: -mdsp} \
772 %{march=74k*:%{!mno-dspr2: -mdspr2 -mdsp}}}"
773
774 #define DRIVER_SELF_SPECS BASE_DRIVER_SELF_SPECS
775
776 #define GENERATE_DIVIDE_TRAPS (TARGET_DIVIDE_TRAPS \
777 && ISA_HAS_COND_TRAP)
778
779 #define GENERATE_BRANCHLIKELY (TARGET_BRANCHLIKELY && !TARGET_MIPS16)
780
781 /* True if the ABI can only work with 64-bit integer registers. We
782 generally allow ad-hoc variations for TARGET_SINGLE_FLOAT, but
783 otherwise floating-point registers must also be 64-bit. */
784 #define ABI_NEEDS_64BIT_REGS (TARGET_NEWABI || mips_abi == ABI_O64)
785
786 /* Likewise for 32-bit regs. */
787 #define ABI_NEEDS_32BIT_REGS (mips_abi == ABI_32)
788
789 /* True if the file format uses 64-bit symbols. At present, this is
790 only true for n64, which uses 64-bit ELF. */
791 #define FILE_HAS_64BIT_SYMBOLS (mips_abi == ABI_64)
792
793 /* True if symbols are 64 bits wide. This is usually determined by
794 the ABI's file format, but it can be overridden by -msym32. Note that
795 overriding the size with -msym32 changes the ABI of relocatable objects,
796 although it doesn't change the ABI of a fully-linked object. */
797 #define ABI_HAS_64BIT_SYMBOLS (FILE_HAS_64BIT_SYMBOLS && !TARGET_SYM32)
798
799 /* ISA has instructions for managing 64-bit fp and gp regs (e.g. mips3). */
800 #define ISA_HAS_64BIT_REGS (ISA_MIPS3 \
801 || ISA_MIPS4 \
802 || ISA_MIPS64 \
803 || ISA_MIPS64R2)
804
805 /* ISA has branch likely instructions (e.g. mips2). */
806 /* Disable branchlikely for tx39 until compare rewrite. They haven't
807 been generated up to this point. */
808 #define ISA_HAS_BRANCHLIKELY (!ISA_MIPS1)
809
810 /* ISA has a three-operand multiplication instruction (usually spelt "mul"). */
811 #define ISA_HAS_MUL3 ((TARGET_MIPS3900 \
812 || TARGET_MIPS5400 \
813 || TARGET_MIPS5500 \
814 || TARGET_MIPS7000 \
815 || TARGET_MIPS9000 \
816 || TARGET_MAD \
817 || ISA_MIPS32 \
818 || ISA_MIPS32R2 \
819 || ISA_MIPS64 \
820 || ISA_MIPS64R2) \
821 && !TARGET_MIPS16)
822
823 /* ISA has a three-operand multiplication instruction. */
824 #define ISA_HAS_DMUL3 (TARGET_64BIT \
825 && TARGET_OCTEON \
826 && !TARGET_MIPS16)
827
828 /* ISA has the floating-point conditional move instructions introduced
829 in mips4. */
830 #define ISA_HAS_FP_CONDMOVE ((ISA_MIPS4 \
831 || ISA_MIPS32 \
832 || ISA_MIPS32R2 \
833 || ISA_MIPS64 \
834 || ISA_MIPS64R2) \
835 && !TARGET_MIPS5500 \
836 && !TARGET_MIPS16)
837
838 /* ISA has the integer conditional move instructions introduced in mips4 and
839 ST Loongson 2E/2F. */
840 #define ISA_HAS_CONDMOVE (ISA_HAS_FP_CONDMOVE || TARGET_LOONGSON_2EF)
841
842 /* ISA has LDC1 and SDC1. */
843 #define ISA_HAS_LDC1_SDC1 (!ISA_MIPS1 && !TARGET_MIPS16)
844
845 /* ISA has the mips4 FP condition code instructions: FP-compare to CC,
846 branch on CC, and move (both FP and non-FP) on CC. */
847 #define ISA_HAS_8CC (ISA_MIPS4 \
848 || ISA_MIPS32 \
849 || ISA_MIPS32R2 \
850 || ISA_MIPS64 \
851 || ISA_MIPS64R2)
852
853 /* This is a catch all for other mips4 instructions: indexed load, the
854 FP madd and msub instructions, and the FP recip and recip sqrt
855 instructions. */
856 #define ISA_HAS_FP4 ((ISA_MIPS4 \
857 || (ISA_MIPS32R2 && TARGET_FLOAT64) \
858 || ISA_MIPS64 \
859 || ISA_MIPS64R2) \
860 && !TARGET_MIPS16)
861
862 /* ISA has paired-single instructions. */
863 #define ISA_HAS_PAIRED_SINGLE (ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2)
864
865 /* ISA has conditional trap instructions. */
866 #define ISA_HAS_COND_TRAP (!ISA_MIPS1 \
867 && !TARGET_MIPS16)
868
869 /* ISA has integer multiply-accumulate instructions, madd and msub. */
870 #define ISA_HAS_MADD_MSUB ((ISA_MIPS32 \
871 || ISA_MIPS32R2 \
872 || ISA_MIPS64 \
873 || ISA_MIPS64R2) \
874 && !TARGET_MIPS16)
875
876 /* Integer multiply-accumulate instructions should be generated. */
877 #define GENERATE_MADD_MSUB (ISA_HAS_MADD_MSUB && !TUNE_74K)
878
879 /* ISA has floating-point madd and msub instructions 'd = a * b [+-] c'. */
880 #define ISA_HAS_FP_MADD4_MSUB4 ISA_HAS_FP4
881
882 /* ISA has floating-point madd and msub instructions 'c = a * b [+-] c'. */
883 #define ISA_HAS_FP_MADD3_MSUB3 TARGET_LOONGSON_2EF
884
885 /* ISA has floating-point nmadd and nmsub instructions
886 'd = -((a * b) [+-] c)'. */
887 #define ISA_HAS_NMADD4_NMSUB4(MODE) \
888 ((ISA_MIPS4 \
889 || (ISA_MIPS32R2 && (MODE) == V2SFmode) \
890 || ISA_MIPS64 \
891 || ISA_MIPS64R2) \
892 && (!TARGET_MIPS5400 || TARGET_MAD) \
893 && !TARGET_MIPS16)
894
895 /* ISA has floating-point nmadd and nmsub instructions
896 'c = -((a * b) [+-] c)'. */
897 #define ISA_HAS_NMADD3_NMSUB3(MODE) \
898 TARGET_LOONGSON_2EF
899
900 /* ISA has count leading zeroes/ones instruction (not implemented). */
901 #define ISA_HAS_CLZ_CLO ((ISA_MIPS32 \
902 || ISA_MIPS32R2 \
903 || ISA_MIPS64 \
904 || ISA_MIPS64R2) \
905 && !TARGET_MIPS16)
906
907 /* ISA has three operand multiply instructions that put
908 the high part in an accumulator: mulhi or mulhiu. */
909 #define ISA_HAS_MULHI ((TARGET_MIPS5400 \
910 || TARGET_MIPS5500 \
911 || TARGET_SR71K) \
912 && !TARGET_MIPS16)
913
914 /* ISA has three operand multiply instructions that
915 negates the result and puts the result in an accumulator. */
916 #define ISA_HAS_MULS ((TARGET_MIPS5400 \
917 || TARGET_MIPS5500 \
918 || TARGET_SR71K) \
919 && !TARGET_MIPS16)
920
921 /* ISA has three operand multiply instructions that subtracts the
922 result from a 4th operand and puts the result in an accumulator. */
923 #define ISA_HAS_MSAC ((TARGET_MIPS5400 \
924 || TARGET_MIPS5500 \
925 || TARGET_SR71K) \
926 && !TARGET_MIPS16)
927
928 /* ISA has three operand multiply instructions that the result
929 from a 4th operand and puts the result in an accumulator. */
930 #define ISA_HAS_MACC ((TARGET_MIPS4120 \
931 || TARGET_MIPS4130 \
932 || TARGET_MIPS5400 \
933 || TARGET_MIPS5500 \
934 || TARGET_SR71K) \
935 && !TARGET_MIPS16)
936
937 /* ISA has NEC VR-style MACC, MACCHI, DMACC and DMACCHI instructions. */
938 #define ISA_HAS_MACCHI ((TARGET_MIPS4120 \
939 || TARGET_MIPS4130) \
940 && !TARGET_MIPS16)
941
942 /* ISA has the "ror" (rotate right) instructions. */
943 #define ISA_HAS_ROR ((ISA_MIPS32R2 \
944 || ISA_MIPS64R2 \
945 || TARGET_MIPS5400 \
946 || TARGET_MIPS5500 \
947 || TARGET_SR71K \
948 || TARGET_SMARTMIPS) \
949 && !TARGET_MIPS16)
950
951 /* ISA has data prefetch instructions. This controls use of 'pref'. */
952 #define ISA_HAS_PREFETCH ((ISA_MIPS4 \
953 || TARGET_LOONGSON_2EF \
954 || ISA_MIPS32 \
955 || ISA_MIPS32R2 \
956 || ISA_MIPS64 \
957 || ISA_MIPS64R2) \
958 && !TARGET_MIPS16)
959
960 /* ISA has data indexed prefetch instructions. This controls use of
961 'prefx', along with TARGET_HARD_FLOAT and TARGET_DOUBLE_FLOAT.
962 (prefx is a cop1x instruction, so can only be used if FP is
963 enabled.) */
964 #define ISA_HAS_PREFETCHX ((ISA_MIPS4 \
965 || ISA_MIPS32R2 \
966 || ISA_MIPS64 \
967 || ISA_MIPS64R2) \
968 && !TARGET_MIPS16)
969
970 /* True if trunc.w.s and trunc.w.d are real (not synthetic)
971 instructions. Both require TARGET_HARD_FLOAT, and trunc.w.d
972 also requires TARGET_DOUBLE_FLOAT. */
973 #define ISA_HAS_TRUNC_W (!ISA_MIPS1)
974
975 /* ISA includes the MIPS32r2 seb and seh instructions. */
976 #define ISA_HAS_SEB_SEH ((ISA_MIPS32R2 \
977 || ISA_MIPS64R2) \
978 && !TARGET_MIPS16)
979
980 /* ISA includes the MIPS32/64 rev 2 ext and ins instructions. */
981 #define ISA_HAS_EXT_INS ((ISA_MIPS32R2 \
982 || ISA_MIPS64R2) \
983 && !TARGET_MIPS16)
984
985 /* ISA has instructions for accessing top part of 64-bit fp regs. */
986 #define ISA_HAS_MXHC1 (TARGET_FLOAT64 \
987 && (ISA_MIPS32R2 \
988 || ISA_MIPS64R2))
989
990 /* ISA has lwxs instruction (load w/scaled index address. */
991 #define ISA_HAS_LWXS (TARGET_SMARTMIPS && !TARGET_MIPS16)
992
993 /* The DSP ASE is available. */
994 #define ISA_HAS_DSP (TARGET_DSP && !TARGET_MIPS16)
995
996 /* Revision 2 of the DSP ASE is available. */
997 #define ISA_HAS_DSPR2 (TARGET_DSPR2 && !TARGET_MIPS16)
998
999 /* True if the result of a load is not available to the next instruction.
1000 A nop will then be needed between instructions like "lw $4,..."
1001 and "addiu $4,$4,1". */
1002 #define ISA_HAS_LOAD_DELAY (ISA_MIPS1 \
1003 && !TARGET_MIPS3900 \
1004 && !TARGET_MIPS16)
1005
1006 /* Likewise mtc1 and mfc1. */
1007 #define ISA_HAS_XFER_DELAY (mips_isa <= 3 \
1008 && !TARGET_LOONGSON_2EF)
1009
1010 /* Likewise floating-point comparisons. */
1011 #define ISA_HAS_FCMP_DELAY (mips_isa <= 3 \
1012 && !TARGET_LOONGSON_2EF)
1013
1014 /* True if mflo and mfhi can be immediately followed by instructions
1015 which write to the HI and LO registers.
1016
1017 According to MIPS specifications, MIPS ISAs I, II, and III need
1018 (at least) two instructions between the reads of HI/LO and
1019 instructions which write them, and later ISAs do not. Contradicting
1020 the MIPS specifications, some MIPS IV processor user manuals (e.g.
1021 the UM for the NEC Vr5000) document needing the instructions between
1022 HI/LO reads and writes, as well. Therefore, we declare only MIPS32,
1023 MIPS64 and later ISAs to have the interlocks, plus any specific
1024 earlier-ISA CPUs for which CPU documentation declares that the
1025 instructions are really interlocked. */
1026 #define ISA_HAS_HILO_INTERLOCKS (ISA_MIPS32 \
1027 || ISA_MIPS32R2 \
1028 || ISA_MIPS64 \
1029 || ISA_MIPS64R2 \
1030 || TARGET_MIPS5500 \
1031 || TARGET_LOONGSON_2EF)
1032
1033 /* ISA includes synci, jr.hb and jalr.hb. */
1034 #define ISA_HAS_SYNCI ((ISA_MIPS32R2 \
1035 || ISA_MIPS64R2) \
1036 && !TARGET_MIPS16)
1037
1038 /* ISA includes sync. */
1039 #define ISA_HAS_SYNC ((mips_isa >= 2 || TARGET_MIPS3900) && !TARGET_MIPS16)
1040 #define GENERATE_SYNC \
1041 (target_flags_explicit & MASK_LLSC \
1042 ? TARGET_LLSC && !TARGET_MIPS16 \
1043 : ISA_HAS_SYNC)
1044
1045 /* ISA includes ll and sc. Note that this implies ISA_HAS_SYNC
1046 because the expanders use both ISA_HAS_SYNC and ISA_HAS_LL_SC
1047 instructions. */
1048 #define ISA_HAS_LL_SC (mips_isa >= 2 && !TARGET_MIPS16)
1049 #define GENERATE_LL_SC \
1050 (target_flags_explicit & MASK_LLSC \
1051 ? TARGET_LLSC && !TARGET_MIPS16 \
1052 : ISA_HAS_LL_SC)
1053
1054 /* ISA includes the baddu instruction. */
1055 #define ISA_HAS_BADDU (TARGET_OCTEON && !TARGET_MIPS16)
1056
1057 /* ISA includes the bbit* instructions. */
1058 #define ISA_HAS_BBIT (TARGET_OCTEON && !TARGET_MIPS16)
1059
1060 /* ISA includes the cins instruction. */
1061 #define ISA_HAS_CINS (TARGET_OCTEON && !TARGET_MIPS16)
1062
1063 /* ISA includes the exts instruction. */
1064 #define ISA_HAS_EXTS (TARGET_OCTEON && !TARGET_MIPS16)
1065
1066 /* ISA includes the seq and sne instructions. */
1067 #define ISA_HAS_SEQ_SNE (TARGET_OCTEON && !TARGET_MIPS16)
1068
1069 /* ISA includes the pop instruction. */
1070 #define ISA_HAS_POP (TARGET_OCTEON && !TARGET_MIPS16)
1071
1072 /* The CACHE instruction is available in non-MIPS16 code. */
1073 #define TARGET_CACHE_BUILTIN (mips_isa >= 3)
1074
1075 /* The CACHE instruction is available. */
1076 #define ISA_HAS_CACHE (TARGET_CACHE_BUILTIN && !TARGET_MIPS16)
1077 \f
1078 /* Add -G xx support. */
1079
1080 #undef SWITCH_TAKES_ARG
1081 #define SWITCH_TAKES_ARG(CHAR) \
1082 (DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
1083
1084 #define CONDITIONAL_REGISTER_USAGE mips_conditional_register_usage ()
1085
1086 /* Show we can debug even without a frame pointer. */
1087 #define CAN_DEBUG_WITHOUT_FP
1088 \f
1089 /* Tell collect what flags to pass to nm. */
1090 #ifndef NM_FLAGS
1091 #define NM_FLAGS "-Bn"
1092 #endif
1093
1094 \f
1095 /* SUBTARGET_ASM_OPTIMIZING_SPEC handles passing optimization options
1096 to the assembler. It may be overridden by subtargets. */
1097 #ifndef SUBTARGET_ASM_OPTIMIZING_SPEC
1098 #define SUBTARGET_ASM_OPTIMIZING_SPEC "\
1099 %{noasmopt:-O0} \
1100 %{!noasmopt:%{O:-O2} %{O1:-O2} %{O2:-O2} %{O3:-O3}}"
1101 #endif
1102
1103 /* SUBTARGET_ASM_DEBUGGING_SPEC handles passing debugging options to
1104 the assembler. It may be overridden by subtargets.
1105
1106 Beginning with gas 2.13, -mdebug must be passed to correctly handle
1107 COFF debugging info. */
1108
1109 #ifndef SUBTARGET_ASM_DEBUGGING_SPEC
1110 #define SUBTARGET_ASM_DEBUGGING_SPEC "\
1111 %{g} %{g0} %{g1} %{g2} %{g3} \
1112 %{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3} \
1113 %{gstabs:-g} %{gstabs0:-g0} %{gstabs1:-g1} %{gstabs2:-g2} %{gstabs3:-g3} \
1114 %{gstabs+:-g} %{gstabs+0:-g0} %{gstabs+1:-g1} %{gstabs+2:-g2} %{gstabs+3:-g3} \
1115 %{gcoff:-g} %{gcoff0:-g0} %{gcoff1:-g1} %{gcoff2:-g2} %{gcoff3:-g3} \
1116 %{gcoff*:-mdebug} %{!gcoff*:-no-mdebug}"
1117 #endif
1118
1119 /* SUBTARGET_ASM_SPEC is always passed to the assembler. It may be
1120 overridden by subtargets. */
1121
1122 #ifndef SUBTARGET_ASM_SPEC
1123 #define SUBTARGET_ASM_SPEC ""
1124 #endif
1125
1126 #undef ASM_SPEC
1127 #define ASM_SPEC "\
1128 %{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} \
1129 %{mips32*} %{mips64*} \
1130 %{mips16} %{mno-mips16:-no-mips16} \
1131 %{mips3d} %{mno-mips3d:-no-mips3d} \
1132 %{mdmx} %{mno-mdmx:-no-mdmx} \
1133 %{mdsp} %{mno-dsp} \
1134 %{mdspr2} %{mno-dspr2} \
1135 %{msmartmips} %{mno-smartmips} \
1136 %{mmt} %{mno-mt} \
1137 %{mfix-vr4120} %{mfix-vr4130} \
1138 %(subtarget_asm_optimizing_spec) \
1139 %(subtarget_asm_debugging_spec) \
1140 %{mabi=*} %{!mabi=*: %(asm_abi_default_spec)} \
1141 %{mgp32} %{mgp64} %{march=*} %{mxgot:-xgot} \
1142 %{mfp32} %{mfp64} \
1143 %{mshared} %{mno-shared} \
1144 %{msym32} %{mno-sym32} \
1145 %{mtune=*} %{v} \
1146 %(subtarget_asm_spec)"
1147
1148 /* Extra switches sometimes passed to the linker. */
1149 /* ??? The bestGnum will never be passed to the linker, because the gcc driver
1150 will interpret it as a -b option. */
1151
1152 #ifndef LINK_SPEC
1153 #define LINK_SPEC "\
1154 %(endian_spec) \
1155 %{G*} %{mips1} %{mips2} %{mips3} %{mips4} %{mips32*} %{mips64*} \
1156 %{bestGnum} %{shared} %{non_shared}"
1157 #endif /* LINK_SPEC defined */
1158
1159
1160 /* Specs for the compiler proper */
1161
1162 /* SUBTARGET_CC1_SPEC is passed to the compiler proper. It may be
1163 overridden by subtargets. */
1164 #ifndef SUBTARGET_CC1_SPEC
1165 #define SUBTARGET_CC1_SPEC ""
1166 #endif
1167
1168 /* CC1_SPEC is the set of arguments to pass to the compiler proper. */
1169
1170 #undef CC1_SPEC
1171 #define CC1_SPEC "\
1172 %{gline:%{!g:%{!g0:%{!g1:%{!g2: -g1}}}}} \
1173 %{G*} %{EB:-meb} %{EL:-mel} %{EB:%{EL:%emay not use both -EB and -EL}} \
1174 %{save-temps: } \
1175 %(subtarget_cc1_spec)"
1176
1177 /* Preprocessor specs. */
1178
1179 /* SUBTARGET_CPP_SPEC is passed to the preprocessor. It may be
1180 overridden by subtargets. */
1181 #ifndef SUBTARGET_CPP_SPEC
1182 #define SUBTARGET_CPP_SPEC ""
1183 #endif
1184
1185 #define CPP_SPEC "%(subtarget_cpp_spec)"
1186
1187 /* This macro defines names of additional specifications to put in the specs
1188 that can be used in various specifications like CC1_SPEC. Its definition
1189 is an initializer with a subgrouping for each command option.
1190
1191 Each subgrouping contains a string constant, that defines the
1192 specification name, and a string constant that used by the GCC driver
1193 program.
1194
1195 Do not define this macro if it does not need to do anything. */
1196
1197 #define EXTRA_SPECS \
1198 { "subtarget_cc1_spec", SUBTARGET_CC1_SPEC }, \
1199 { "subtarget_cpp_spec", SUBTARGET_CPP_SPEC }, \
1200 { "subtarget_asm_optimizing_spec", SUBTARGET_ASM_OPTIMIZING_SPEC }, \
1201 { "subtarget_asm_debugging_spec", SUBTARGET_ASM_DEBUGGING_SPEC }, \
1202 { "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \
1203 { "asm_abi_default_spec", "-" MULTILIB_ABI_DEFAULT }, \
1204 { "endian_spec", ENDIAN_SPEC }, \
1205 SUBTARGET_EXTRA_SPECS
1206
1207 #ifndef SUBTARGET_EXTRA_SPECS
1208 #define SUBTARGET_EXTRA_SPECS
1209 #endif
1210 \f
1211 #define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
1212 #define DWARF2_DEBUGGING_INFO 1 /* dwarf2 debugging info */
1213
1214 #ifndef PREFERRED_DEBUGGING_TYPE
1215 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
1216 #endif
1217
1218 /* The size of DWARF addresses should be the same as the size of symbols
1219 in the target file format. They shouldn't depend on things like -msym32,
1220 because many DWARF consumers do not allow the mixture of address sizes
1221 that one would then get from linking -msym32 code with -msym64 code.
1222
1223 Note that the default POINTER_SIZE test is not appropriate for MIPS.
1224 EABI64 has 64-bit pointers but uses 32-bit ELF. */
1225 #define DWARF2_ADDR_SIZE (FILE_HAS_64BIT_SYMBOLS ? 8 : 4)
1226
1227 /* By default, turn on GDB extensions. */
1228 #define DEFAULT_GDB_EXTENSIONS 1
1229
1230 /* Local compiler-generated symbols must have a prefix that the assembler
1231 understands. By default, this is $, although some targets (e.g.,
1232 NetBSD-ELF) need to override this. */
1233
1234 #ifndef LOCAL_LABEL_PREFIX
1235 #define LOCAL_LABEL_PREFIX "$"
1236 #endif
1237
1238 /* By default on the mips, external symbols do not have an underscore
1239 prepended, but some targets (e.g., NetBSD) require this. */
1240
1241 #ifndef USER_LABEL_PREFIX
1242 #define USER_LABEL_PREFIX ""
1243 #endif
1244
1245 /* On Sun 4, this limit is 2048. We use 1500 to be safe,
1246 since the length can run past this up to a continuation point. */
1247 #undef DBX_CONTIN_LENGTH
1248 #define DBX_CONTIN_LENGTH 1500
1249
1250 /* How to renumber registers for dbx and gdb. */
1251 #define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[REGNO]
1252
1253 /* The mapping from gcc register number to DWARF 2 CFA column number. */
1254 #define DWARF_FRAME_REGNUM(REGNO) mips_dwarf_regno[REGNO]
1255
1256 /* The DWARF 2 CFA column which tracks the return address. */
1257 #define DWARF_FRAME_RETURN_COLUMN RETURN_ADDR_REGNUM
1258
1259 /* Before the prologue, RA lives in r31. */
1260 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, RETURN_ADDR_REGNUM)
1261
1262 /* Describe how we implement __builtin_eh_return. */
1263 #define EH_RETURN_DATA_REGNO(N) \
1264 ((N) < (TARGET_MIPS16 ? 2 : 4) ? (N) + GP_ARG_FIRST : INVALID_REGNUM)
1265
1266 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, GP_REG_FIRST + 3)
1267
1268 #define EH_USES(N) mips_eh_uses (N)
1269
1270 /* Offsets recorded in opcodes are a multiple of this alignment factor.
1271 The default for this in 64-bit mode is 8, which causes problems with
1272 SFmode register saves. */
1273 #define DWARF_CIE_DATA_ALIGNMENT -4
1274
1275 /* Correct the offset of automatic variables and arguments. Note that
1276 the MIPS debug format wants all automatic variables and arguments
1277 to be in terms of the virtual frame pointer (stack pointer before
1278 any adjustment in the function), while the MIPS 3.0 linker wants
1279 the frame pointer to be the stack pointer after the initial
1280 adjustment. */
1281
1282 #define DEBUGGER_AUTO_OFFSET(X) \
1283 mips_debugger_offset (X, (HOST_WIDE_INT) 0)
1284 #define DEBUGGER_ARG_OFFSET(OFFSET, X) \
1285 mips_debugger_offset (X, (HOST_WIDE_INT) OFFSET)
1286 \f
1287 /* Target machine storage layout */
1288
1289 #define BITS_BIG_ENDIAN 0
1290 #define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
1291 #define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
1292
1293 /* Define this to set the endianness to use in libgcc2.c, which can
1294 not depend on target_flags. */
1295 #if !defined(MIPSEL) && !defined(__MIPSEL__)
1296 #define LIBGCC2_WORDS_BIG_ENDIAN 1
1297 #else
1298 #define LIBGCC2_WORDS_BIG_ENDIAN 0
1299 #endif
1300
1301 #define MAX_BITS_PER_WORD 64
1302
1303 /* Width of a word, in units (bytes). */
1304 #define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
1305 #ifndef IN_LIBGCC2
1306 #define MIN_UNITS_PER_WORD 4
1307 #endif
1308
1309 /* For MIPS, width of a floating point register. */
1310 #define UNITS_PER_FPREG (TARGET_FLOAT64 ? 8 : 4)
1311
1312 /* The number of consecutive floating-point registers needed to store the
1313 largest format supported by the FPU. */
1314 #define MAX_FPRS_PER_FMT (TARGET_FLOAT64 || TARGET_SINGLE_FLOAT ? 1 : 2)
1315
1316 /* The number of consecutive floating-point registers needed to store the
1317 smallest format supported by the FPU. */
1318 #define MIN_FPRS_PER_FMT \
1319 (ISA_MIPS32 || ISA_MIPS32R2 || ISA_MIPS64 || ISA_MIPS64R2 \
1320 ? 1 : MAX_FPRS_PER_FMT)
1321
1322 /* The largest size of value that can be held in floating-point
1323 registers and moved with a single instruction. */
1324 #define UNITS_PER_HWFPVALUE \
1325 (TARGET_SOFT_FLOAT_ABI ? 0 : MAX_FPRS_PER_FMT * UNITS_PER_FPREG)
1326
1327 /* The largest size of value that can be held in floating-point
1328 registers. */
1329 #define UNITS_PER_FPVALUE \
1330 (TARGET_SOFT_FLOAT_ABI ? 0 \
1331 : TARGET_SINGLE_FLOAT ? UNITS_PER_FPREG \
1332 : LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT)
1333
1334 /* The number of bytes in a double. */
1335 #define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
1336
1337 /* Set the sizes of the core types. */
1338 #define SHORT_TYPE_SIZE 16
1339 #define INT_TYPE_SIZE 32
1340 #define LONG_TYPE_SIZE (TARGET_LONG64 ? 64 : 32)
1341 #define LONG_LONG_TYPE_SIZE 64
1342
1343 #define FLOAT_TYPE_SIZE 32
1344 #define DOUBLE_TYPE_SIZE 64
1345 #define LONG_DOUBLE_TYPE_SIZE (TARGET_NEWABI ? 128 : 64)
1346
1347 /* Define the sizes of fixed-point types. */
1348 #define SHORT_FRACT_TYPE_SIZE 8
1349 #define FRACT_TYPE_SIZE 16
1350 #define LONG_FRACT_TYPE_SIZE 32
1351 #define LONG_LONG_FRACT_TYPE_SIZE 64
1352
1353 #define SHORT_ACCUM_TYPE_SIZE 16
1354 #define ACCUM_TYPE_SIZE 32
1355 #define LONG_ACCUM_TYPE_SIZE 64
1356 /* FIXME. LONG_LONG_ACCUM_TYPE_SIZE should be 128 bits, but GCC
1357 doesn't support 128-bit integers for MIPS32 currently. */
1358 #define LONG_LONG_ACCUM_TYPE_SIZE (TARGET_64BIT ? 128 : 64)
1359
1360 /* long double is not a fixed mode, but the idea is that, if we
1361 support long double, we also want a 128-bit integer type. */
1362 #define MAX_FIXED_MODE_SIZE LONG_DOUBLE_TYPE_SIZE
1363
1364 #ifdef IN_LIBGCC2
1365 #if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
1366 || (defined _ABI64 && _MIPS_SIM == _ABI64)
1367 # define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
1368 # else
1369 # define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
1370 # endif
1371 #endif
1372
1373 /* Width in bits of a pointer. */
1374 #ifndef POINTER_SIZE
1375 #define POINTER_SIZE ((TARGET_LONG64 && TARGET_64BIT) ? 64 : 32)
1376 #endif
1377
1378 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
1379 #define PARM_BOUNDARY BITS_PER_WORD
1380
1381 /* Allocation boundary (in *bits*) for the code of a function. */
1382 #define FUNCTION_BOUNDARY 32
1383
1384 /* Alignment of field after `int : 0' in a structure. */
1385 #define EMPTY_FIELD_BOUNDARY 32
1386
1387 /* Every structure's size must be a multiple of this. */
1388 /* 8 is observed right on a DECstation and on riscos 4.02. */
1389 #define STRUCTURE_SIZE_BOUNDARY 8
1390
1391 /* There is no point aligning anything to a rounder boundary than this. */
1392 #define BIGGEST_ALIGNMENT LONG_DOUBLE_TYPE_SIZE
1393
1394 /* All accesses must be aligned. */
1395 #define STRICT_ALIGNMENT 1
1396
1397 /* Define this if you wish to imitate the way many other C compilers
1398 handle alignment of bitfields and the structures that contain
1399 them.
1400
1401 The behavior is that the type written for a bit-field (`int',
1402 `short', or other integer type) imposes an alignment for the
1403 entire structure, as if the structure really did contain an
1404 ordinary field of that type. In addition, the bit-field is placed
1405 within the structure so that it would fit within such a field,
1406 not crossing a boundary for it.
1407
1408 Thus, on most machines, a bit-field whose type is written as `int'
1409 would not cross a four-byte boundary, and would force four-byte
1410 alignment for the whole structure. (The alignment used may not
1411 be four bytes; it is controlled by the other alignment
1412 parameters.)
1413
1414 If the macro is defined, its definition should be a C expression;
1415 a nonzero value for the expression enables this behavior. */
1416
1417 #define PCC_BITFIELD_TYPE_MATTERS 1
1418
1419 /* If defined, a C expression to compute the alignment given to a
1420 constant that is being placed in memory. CONSTANT is the constant
1421 and ALIGN is the alignment that the object would ordinarily have.
1422 The value of this macro is used instead of that alignment to align
1423 the object.
1424
1425 If this macro is not defined, then ALIGN is used.
1426
1427 The typical use of this macro is to increase alignment for string
1428 constants to be word aligned so that `strcpy' calls that copy
1429 constants can be done inline. */
1430
1431 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
1432 ((TREE_CODE (EXP) == STRING_CST || TREE_CODE (EXP) == CONSTRUCTOR) \
1433 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
1434
1435 /* If defined, a C expression to compute the alignment for a static
1436 variable. TYPE is the data type, and ALIGN is the alignment that
1437 the object would ordinarily have. The value of this macro is used
1438 instead of that alignment to align the object.
1439
1440 If this macro is not defined, then ALIGN is used.
1441
1442 One use of this macro is to increase alignment of medium-size
1443 data to make it all fit in fewer cache lines. Another is to
1444 cause character arrays to be word-aligned so that `strcpy' calls
1445 that copy constants to character arrays can be done inline. */
1446
1447 #undef DATA_ALIGNMENT
1448 #define DATA_ALIGNMENT(TYPE, ALIGN) \
1449 ((((ALIGN) < BITS_PER_WORD) \
1450 && (TREE_CODE (TYPE) == ARRAY_TYPE \
1451 || TREE_CODE (TYPE) == UNION_TYPE \
1452 || TREE_CODE (TYPE) == RECORD_TYPE)) ? BITS_PER_WORD : (ALIGN))
1453
1454 /* We need this for the same reason as DATA_ALIGNMENT, namely to cause
1455 character arrays to be word-aligned so that `strcpy' calls that copy
1456 constants to character arrays can be done inline, and 'strcmp' can be
1457 optimised to use word loads. */
1458 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \
1459 DATA_ALIGNMENT (TYPE, ALIGN)
1460
1461 #define PAD_VARARGS_DOWN \
1462 (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
1463
1464 /* Define if operations between registers always perform the operation
1465 on the full register even if a narrower mode is specified. */
1466 #define WORD_REGISTER_OPERATIONS
1467
1468 /* When in 64-bit mode, move insns will sign extend SImode and CCmode
1469 moves. All other references are zero extended. */
1470 #define LOAD_EXTEND_OP(MODE) \
1471 (TARGET_64BIT && ((MODE) == SImode || (MODE) == CCmode) \
1472 ? SIGN_EXTEND : ZERO_EXTEND)
1473
1474 /* Define this macro if it is advisable to hold scalars in registers
1475 in a wider mode than that declared by the program. In such cases,
1476 the value is constrained to be within the bounds of the declared
1477 type, but kept valid in the wider mode. The signedness of the
1478 extension may differ from that of the type. */
1479
1480 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
1481 if (GET_MODE_CLASS (MODE) == MODE_INT \
1482 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
1483 { \
1484 if ((MODE) == SImode) \
1485 (UNSIGNEDP) = 0; \
1486 (MODE) = Pmode; \
1487 }
1488
1489 /* Pmode is always the same as ptr_mode, but not always the same as word_mode.
1490 Extensions of pointers to word_mode must be signed. */
1491 #define POINTERS_EXTEND_UNSIGNED false
1492
1493 /* Define if loading short immediate values into registers sign extends. */
1494 #define SHORT_IMMEDIATES_SIGN_EXTEND
1495
1496 /* The [d]clz instructions have the natural values at 0. */
1497
1498 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
1499 ((VALUE) = GET_MODE_BITSIZE (MODE), 2)
1500 \f
1501 /* Standard register usage. */
1502
1503 /* Number of hardware registers. We have:
1504
1505 - 32 integer registers
1506 - 32 floating point registers
1507 - 8 condition code registers
1508 - 2 accumulator registers (hi and lo)
1509 - 32 registers each for coprocessors 0, 2 and 3
1510 - 4 fake registers:
1511 - ARG_POINTER_REGNUM
1512 - FRAME_POINTER_REGNUM
1513 - GOT_VERSION_REGNUM (see the comment above load_call<mode> for details)
1514 - CPRESTORE_SLOT_REGNUM
1515 - 2 dummy entries that were used at various times in the past.
1516 - 6 DSP accumulator registers (3 hi-lo pairs) for MIPS DSP ASE
1517 - 6 DSP control registers */
1518
1519 #define FIRST_PSEUDO_REGISTER 188
1520
1521 /* By default, fix the kernel registers ($26 and $27), the global
1522 pointer ($28) and the stack pointer ($29). This can change
1523 depending on the command-line options.
1524
1525 Regarding coprocessor registers: without evidence to the contrary,
1526 it's best to assume that each coprocessor register has a unique
1527 use. This can be overridden, in, e.g., mips_option_override or
1528 CONDITIONAL_REGISTER_USAGE should the assumption be inappropriate
1529 for a particular target. */
1530
1531 #define FIXED_REGISTERS \
1532 { \
1533 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1534 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, \
1535 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1536 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1537 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, \
1538 /* COP0 registers */ \
1539 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1540 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1541 /* COP2 registers */ \
1542 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1543 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1544 /* COP3 registers */ \
1545 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1546 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1547 /* 6 DSP accumulator registers & 6 control registers */ \
1548 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1 \
1549 }
1550
1551
1552 /* Set up this array for o32 by default.
1553
1554 Note that we don't mark $31 as a call-clobbered register. The idea is
1555 that it's really the call instructions themselves which clobber $31.
1556 We don't care what the called function does with it afterwards.
1557
1558 This approach makes it easier to implement sibcalls. Unlike normal
1559 calls, sibcalls don't clobber $31, so the register reaches the
1560 called function in tact. EPILOGUE_USES says that $31 is useful
1561 to the called function. */
1562
1563 #define CALL_USED_REGISTERS \
1564 { \
1565 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1566 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, \
1567 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1568 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1569 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1570 /* COP0 registers */ \
1571 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1572 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1573 /* COP2 registers */ \
1574 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1575 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1576 /* COP3 registers */ \
1577 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1578 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1579 /* 6 DSP accumulator registers & 6 control registers */ \
1580 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
1581 }
1582
1583
1584 /* Define this since $28, though fixed, is call-saved in many ABIs. */
1585
1586 #define CALL_REALLY_USED_REGISTERS \
1587 { /* General registers. */ \
1588 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1589 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, \
1590 /* Floating-point registers. */ \
1591 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1592 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1593 /* Others. */ \
1594 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, \
1595 /* COP0 registers */ \
1596 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1597 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1598 /* COP2 registers */ \
1599 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1600 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1601 /* COP3 registers */ \
1602 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1603 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
1604 /* 6 DSP accumulator registers & 6 control registers */ \
1605 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0 \
1606 }
1607
1608 /* Internal macros to classify a register number as to whether it's a
1609 general purpose register, a floating point register, a
1610 multiply/divide register, or a status register. */
1611
1612 #define GP_REG_FIRST 0
1613 #define GP_REG_LAST 31
1614 #define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
1615 #define GP_DBX_FIRST 0
1616 #define K0_REG_NUM (GP_REG_FIRST + 26)
1617 #define K1_REG_NUM (GP_REG_FIRST + 27)
1618 #define KERNEL_REG_P(REGNO) (IN_RANGE (REGNO, K0_REG_NUM, K1_REG_NUM))
1619
1620 #define FP_REG_FIRST 32
1621 #define FP_REG_LAST 63
1622 #define FP_REG_NUM (FP_REG_LAST - FP_REG_FIRST + 1)
1623 #define FP_DBX_FIRST ((write_symbols == DBX_DEBUG) ? 38 : 32)
1624
1625 #define MD_REG_FIRST 64
1626 #define MD_REG_LAST 65
1627 #define MD_REG_NUM (MD_REG_LAST - MD_REG_FIRST + 1)
1628 #define MD_DBX_FIRST (FP_DBX_FIRST + FP_REG_NUM)
1629
1630 /* The DWARF 2 CFA column which tracks the return address from a
1631 signal handler context. This means that to maintain backwards
1632 compatibility, no hard register can be assigned this column if it
1633 would need to be handled by the DWARF unwinder. */
1634 #define DWARF_ALT_FRAME_RETURN_COLUMN 66
1635
1636 #define ST_REG_FIRST 67
1637 #define ST_REG_LAST 74
1638 #define ST_REG_NUM (ST_REG_LAST - ST_REG_FIRST + 1)
1639
1640
1641 /* FIXME: renumber. */
1642 #define COP0_REG_FIRST 80
1643 #define COP0_REG_LAST 111
1644 #define COP0_REG_NUM (COP0_REG_LAST - COP0_REG_FIRST + 1)
1645
1646 #define COP0_STATUS_REG_NUM (COP0_REG_FIRST + 12)
1647 #define COP0_CAUSE_REG_NUM (COP0_REG_FIRST + 13)
1648 #define COP0_EPC_REG_NUM (COP0_REG_FIRST + 14)
1649
1650 #define COP2_REG_FIRST 112
1651 #define COP2_REG_LAST 143
1652 #define COP2_REG_NUM (COP2_REG_LAST - COP2_REG_FIRST + 1)
1653
1654 #define COP3_REG_FIRST 144
1655 #define COP3_REG_LAST 175
1656 #define COP3_REG_NUM (COP3_REG_LAST - COP3_REG_FIRST + 1)
1657 /* ALL_COP_REG_NUM assumes that COP0,2,and 3 are numbered consecutively. */
1658 #define ALL_COP_REG_NUM (COP3_REG_LAST - COP0_REG_FIRST + 1)
1659
1660 #define DSP_ACC_REG_FIRST 176
1661 #define DSP_ACC_REG_LAST 181
1662 #define DSP_ACC_REG_NUM (DSP_ACC_REG_LAST - DSP_ACC_REG_FIRST + 1)
1663
1664 #define AT_REGNUM (GP_REG_FIRST + 1)
1665 #define HI_REGNUM (TARGET_BIG_ENDIAN ? MD_REG_FIRST : MD_REG_FIRST + 1)
1666 #define LO_REGNUM (TARGET_BIG_ENDIAN ? MD_REG_FIRST + 1 : MD_REG_FIRST)
1667
1668 /* A few bitfield locations for the coprocessor registers. */
1669 /* Request Interrupt Priority Level is from bit 10 to bit 15 of
1670 the cause register for the EIC interrupt mode. */
1671 #define CAUSE_IPL 10
1672 /* Interrupt Priority Level is from bit 10 to bit 15 of the status register. */
1673 #define SR_IPL 10
1674 /* Exception Level is at bit 1 of the status register. */
1675 #define SR_EXL 1
1676 /* Interrupt Enable is at bit 0 of the status register. */
1677 #define SR_IE 0
1678
1679 /* FPSW_REGNUM is the single condition code used if !ISA_HAS_8CC.
1680 If ISA_HAS_8CC, it should not be used, and an arbitrary ST_REG
1681 should be used instead. */
1682 #define FPSW_REGNUM ST_REG_FIRST
1683
1684 #define GP_REG_P(REGNO) \
1685 ((unsigned int) ((int) (REGNO) - GP_REG_FIRST) < GP_REG_NUM)
1686 #define M16_REG_P(REGNO) \
1687 (((REGNO) >= 2 && (REGNO) <= 7) || (REGNO) == 16 || (REGNO) == 17)
1688 #define FP_REG_P(REGNO) \
1689 ((unsigned int) ((int) (REGNO) - FP_REG_FIRST) < FP_REG_NUM)
1690 #define MD_REG_P(REGNO) \
1691 ((unsigned int) ((int) (REGNO) - MD_REG_FIRST) < MD_REG_NUM)
1692 #define ST_REG_P(REGNO) \
1693 ((unsigned int) ((int) (REGNO) - ST_REG_FIRST) < ST_REG_NUM)
1694 #define COP0_REG_P(REGNO) \
1695 ((unsigned int) ((int) (REGNO) - COP0_REG_FIRST) < COP0_REG_NUM)
1696 #define COP2_REG_P(REGNO) \
1697 ((unsigned int) ((int) (REGNO) - COP2_REG_FIRST) < COP2_REG_NUM)
1698 #define COP3_REG_P(REGNO) \
1699 ((unsigned int) ((int) (REGNO) - COP3_REG_FIRST) < COP3_REG_NUM)
1700 #define ALL_COP_REG_P(REGNO) \
1701 ((unsigned int) ((int) (REGNO) - COP0_REG_FIRST) < ALL_COP_REG_NUM)
1702 /* Test if REGNO is one of the 6 new DSP accumulators. */
1703 #define DSP_ACC_REG_P(REGNO) \
1704 ((unsigned int) ((int) (REGNO) - DSP_ACC_REG_FIRST) < DSP_ACC_REG_NUM)
1705 /* Test if REGNO is hi, lo, or one of the 6 new DSP accumulators. */
1706 #define ACC_REG_P(REGNO) \
1707 (MD_REG_P (REGNO) || DSP_ACC_REG_P (REGNO))
1708
1709 #define FP_REG_RTX_P(X) (REG_P (X) && FP_REG_P (REGNO (X)))
1710
1711 /* True if X is (const (unspec [(const_int 0)] UNSPEC_GP)). This is used
1712 to initialize the mips16 gp pseudo register. */
1713 #define CONST_GP_P(X) \
1714 (GET_CODE (X) == CONST \
1715 && GET_CODE (XEXP (X, 0)) == UNSPEC \
1716 && XINT (XEXP (X, 0), 1) == UNSPEC_GP)
1717
1718 /* Return coprocessor number from register number. */
1719
1720 #define COPNUM_AS_CHAR_FROM_REGNUM(REGNO) \
1721 (COP0_REG_P (REGNO) ? '0' : COP2_REG_P (REGNO) ? '2' \
1722 : COP3_REG_P (REGNO) ? '3' : '?')
1723
1724
1725 #define HARD_REGNO_NREGS(REGNO, MODE) mips_hard_regno_nregs (REGNO, MODE)
1726
1727 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
1728 mips_hard_regno_mode_ok[ (int)(MODE) ][ (REGNO) ]
1729
1730 #define MODES_TIEABLE_P mips_modes_tieable_p
1731
1732 /* Register to use for pushing function arguments. */
1733 #define STACK_POINTER_REGNUM (GP_REG_FIRST + 29)
1734
1735 /* These two registers don't really exist: they get eliminated to either
1736 the stack or hard frame pointer. */
1737 #define ARG_POINTER_REGNUM 77
1738 #define FRAME_POINTER_REGNUM 78
1739
1740 /* $30 is not available on the mips16, so we use $17 as the frame
1741 pointer. */
1742 #define HARD_FRAME_POINTER_REGNUM \
1743 (TARGET_MIPS16 ? GP_REG_FIRST + 17 : GP_REG_FIRST + 30)
1744
1745 #define HARD_FRAME_POINTER_IS_FRAME_POINTER 0
1746 #define HARD_FRAME_POINTER_IS_ARG_POINTER 0
1747
1748 /* Register in which static-chain is passed to a function. */
1749 #define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 15)
1750
1751 /* Registers used as temporaries in prologue/epilogue code:
1752
1753 - If a MIPS16 PIC function needs access to _gp, it first loads
1754 the value into MIPS16_PIC_TEMP and then copies it to $gp.
1755
1756 - The prologue can use MIPS_PROLOGUE_TEMP as a general temporary
1757 register. The register must not conflict with MIPS16_PIC_TEMP.
1758
1759 - The epilogue can use MIPS_EPILOGUE_TEMP as a general temporary
1760 register.
1761
1762 If we're generating MIPS16 code, these registers must come from the
1763 core set of 8. The prologue registers mustn't conflict with any
1764 incoming arguments, the static chain pointer, or the frame pointer.
1765 The epilogue temporary mustn't conflict with the return registers,
1766 the PIC call register ($25), the frame pointer, the EH stack adjustment,
1767 or the EH data registers.
1768
1769 If we're generating interrupt handlers, we use K0 as a temporary register
1770 in prologue/epilogue code. */
1771
1772 #define MIPS16_PIC_TEMP_REGNUM (GP_REG_FIRST + 2)
1773 #define MIPS_PROLOGUE_TEMP_REGNUM \
1774 (cfun->machine->interrupt_handler_p ? K0_REG_NUM : GP_REG_FIRST + 3)
1775 #define MIPS_EPILOGUE_TEMP_REGNUM \
1776 (cfun->machine->interrupt_handler_p \
1777 ? K0_REG_NUM \
1778 : GP_REG_FIRST + (TARGET_MIPS16 ? 6 : 8))
1779
1780 #define MIPS16_PIC_TEMP gen_rtx_REG (Pmode, MIPS16_PIC_TEMP_REGNUM)
1781 #define MIPS_PROLOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_PROLOGUE_TEMP_REGNUM)
1782 #define MIPS_EPILOGUE_TEMP(MODE) gen_rtx_REG (MODE, MIPS_EPILOGUE_TEMP_REGNUM)
1783
1784 /* Define this macro if it is as good or better to call a constant
1785 function address than to call an address kept in a register. */
1786 #define NO_FUNCTION_CSE 1
1787
1788 /* The ABI-defined global pointer. Sometimes we use a different
1789 register in leaf functions: see PIC_OFFSET_TABLE_REGNUM. */
1790 #define GLOBAL_POINTER_REGNUM (GP_REG_FIRST + 28)
1791
1792 /* We normally use $28 as the global pointer. However, when generating
1793 n32/64 PIC, it is better for leaf functions to use a call-clobbered
1794 register instead. They can then avoid saving and restoring $28
1795 and perhaps avoid using a frame at all.
1796
1797 When a leaf function uses something other than $28, mips_expand_prologue
1798 will modify pic_offset_table_rtx in place. Take the register number
1799 from there after reload. */
1800 #define PIC_OFFSET_TABLE_REGNUM \
1801 (reload_completed ? REGNO (pic_offset_table_rtx) : GLOBAL_POINTER_REGNUM)
1802
1803 #define PIC_FUNCTION_ADDR_REGNUM (GP_REG_FIRST + 25)
1804 \f
1805 /* Define the classes of registers for register constraints in the
1806 machine description. Also define ranges of constants.
1807
1808 One of the classes must always be named ALL_REGS and include all hard regs.
1809 If there is more than one class, another class must be named NO_REGS
1810 and contain no registers.
1811
1812 The name GENERAL_REGS must be the name of a class (or an alias for
1813 another name such as ALL_REGS). This is the class of registers
1814 that is allowed by "g" or "r" in a register constraint.
1815 Also, registers outside this class are allocated only when
1816 instructions express preferences for them.
1817
1818 The classes must be numbered in nondecreasing order; that is,
1819 a larger-numbered class must never be contained completely
1820 in a smaller-numbered class.
1821
1822 For any two classes, it is very desirable that there be another
1823 class that represents their union. */
1824
1825 enum reg_class
1826 {
1827 NO_REGS, /* no registers in set */
1828 M16_REGS, /* mips16 directly accessible registers */
1829 T_REG, /* mips16 T register ($24) */
1830 M16_T_REGS, /* mips16 registers plus T register */
1831 PIC_FN_ADDR_REG, /* SVR4 PIC function address register */
1832 V1_REG, /* Register $v1 ($3) used for TLS access. */
1833 LEA_REGS, /* Every GPR except $25 */
1834 GR_REGS, /* integer registers */
1835 FP_REGS, /* floating point registers */
1836 MD0_REG, /* first multiply/divide register */
1837 MD1_REG, /* second multiply/divide register */
1838 MD_REGS, /* multiply/divide registers (hi/lo) */
1839 COP0_REGS, /* generic coprocessor classes */
1840 COP2_REGS,
1841 COP3_REGS,
1842 ST_REGS, /* status registers (fp status) */
1843 DSP_ACC_REGS, /* DSP accumulator registers */
1844 ACC_REGS, /* Hi/Lo and DSP accumulator registers */
1845 FRAME_REGS, /* $arg and $frame */
1846 GR_AND_MD0_REGS, /* union classes */
1847 GR_AND_MD1_REGS,
1848 GR_AND_MD_REGS,
1849 GR_AND_ACC_REGS,
1850 ALL_REGS, /* all registers */
1851 LIM_REG_CLASSES /* max value + 1 */
1852 };
1853
1854 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1855
1856 #define GENERAL_REGS GR_REGS
1857
1858 /* An initializer containing the names of the register classes as C
1859 string constants. These names are used in writing some of the
1860 debugging dumps. */
1861
1862 #define REG_CLASS_NAMES \
1863 { \
1864 "NO_REGS", \
1865 "M16_REGS", \
1866 "T_REG", \
1867 "M16_T_REGS", \
1868 "PIC_FN_ADDR_REG", \
1869 "V1_REG", \
1870 "LEA_REGS", \
1871 "GR_REGS", \
1872 "FP_REGS", \
1873 "MD0_REG", \
1874 "MD1_REG", \
1875 "MD_REGS", \
1876 /* coprocessor registers */ \
1877 "COP0_REGS", \
1878 "COP2_REGS", \
1879 "COP3_REGS", \
1880 "ST_REGS", \
1881 "DSP_ACC_REGS", \
1882 "ACC_REGS", \
1883 "FRAME_REGS", \
1884 "GR_AND_MD0_REGS", \
1885 "GR_AND_MD1_REGS", \
1886 "GR_AND_MD_REGS", \
1887 "GR_AND_ACC_REGS", \
1888 "ALL_REGS" \
1889 }
1890
1891 /* An initializer containing the contents of the register classes,
1892 as integers which are bit masks. The Nth integer specifies the
1893 contents of class N. The way the integer MASK is interpreted is
1894 that register R is in the class if `MASK & (1 << R)' is 1.
1895
1896 When the machine has more than 32 registers, an integer does not
1897 suffice. Then the integers are replaced by sub-initializers,
1898 braced groupings containing several integers. Each
1899 sub-initializer must be suitable as an initializer for the type
1900 `HARD_REG_SET' which is defined in `hard-reg-set.h'. */
1901
1902 #define REG_CLASS_CONTENTS \
1903 { \
1904 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
1905 { 0x000300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_REGS */ \
1906 { 0x01000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* T_REG */ \
1907 { 0x010300fc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* M16_T_REGS */ \
1908 { 0x02000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* PIC_FN_ADDR_REG */ \
1909 { 0x00000008, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* V1_REG */ \
1910 { 0xfdffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* LEA_REGS */ \
1911 { 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* GR_REGS */ \
1912 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* FP_REGS */ \
1913 { 0x00000000, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* MD0_REG */ \
1914 { 0x00000000, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* MD1_REG */ \
1915 { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* MD_REGS */ \
1916 { 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000, 0x00000000 }, /* COP0_REGS */ \
1917 { 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff, 0x00000000 }, /* COP2_REGS */ \
1918 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0xffff0000, 0x0000ffff }, /* COP3_REGS */ \
1919 { 0x00000000, 0x00000000, 0x000007f8, 0x00000000, 0x00000000, 0x00000000 }, /* ST_REGS */ \
1920 { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x003f0000 }, /* DSP_ACC_REGS */ \
1921 { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* ACC_REGS */ \
1922 { 0x00000000, 0x00000000, 0x00006000, 0x00000000, 0x00000000, 0x00000000 }, /* FRAME_REGS */ \
1923 { 0xffffffff, 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD0_REGS */ \
1924 { 0xffffffff, 0x00000000, 0x00000002, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD1_REGS */ \
1925 { 0xffffffff, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000000 }, /* GR_AND_MD_REGS */ \
1926 { 0xffffffff, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* GR_AND_ACC_REGS */ \
1927 { 0xffffffff, 0xffffffff, 0xffff67ff, 0xffffffff, 0xffffffff, 0x0fffffff } /* ALL_REGS */ \
1928 }
1929
1930
1931 /* A C expression whose value is a register class containing hard
1932 register REGNO. In general there is more that one such class;
1933 choose a class which is "minimal", meaning that no smaller class
1934 also contains the register. */
1935
1936 #define REGNO_REG_CLASS(REGNO) mips_regno_to_class[ (REGNO) ]
1937
1938 /* A macro whose definition is the name of the class to which a
1939 valid base register must belong. A base register is one used in
1940 an address which is the register value plus a displacement. */
1941
1942 #define BASE_REG_CLASS (TARGET_MIPS16 ? M16_REGS : GR_REGS)
1943
1944 /* A macro whose definition is the name of the class to which a
1945 valid index register must belong. An index register is one used
1946 in an address where its value is either multiplied by a scale
1947 factor or added to another register (as well as added to a
1948 displacement). */
1949
1950 #define INDEX_REG_CLASS NO_REGS
1951
1952 /* We generally want to put call-clobbered registers ahead of
1953 call-saved ones. (IRA expects this.) */
1954
1955 #define REG_ALLOC_ORDER \
1956 { /* Accumulator registers. When GPRs and accumulators have equal \
1957 cost, we generally prefer to use accumulators. For example, \
1958 a division of multiplication result is better allocated to LO, \
1959 so that we put the MFLO at the point of use instead of at the \
1960 point of definition. It's also needed if we're to take advantage \
1961 of the extra accumulators available with -mdspr2. In some cases, \
1962 it can also help to reduce register pressure. */ \
1963 64, 65,176,177,178,179,180,181, \
1964 /* Call-clobbered GPRs. */ \
1965 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
1966 24, 25, 31, \
1967 /* The global pointer. This is call-clobbered for o32 and o64 \
1968 abicalls, call-saved for n32 and n64 abicalls, and a program \
1969 invariant otherwise. Putting it between the call-clobbered \
1970 and call-saved registers should cope with all eventualities. */ \
1971 28, \
1972 /* Call-saved GPRs. */ \
1973 16, 17, 18, 19, 20, 21, 22, 23, 30, \
1974 /* GPRs that can never be exposed to the register allocator. */ \
1975 0, 26, 27, 29, \
1976 /* Call-clobbered FPRs. */ \
1977 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
1978 48, 49, 50, 51, \
1979 /* FPRs that are usually call-saved. The odd ones are actually \
1980 call-clobbered for n32, but listing them ahead of the even \
1981 registers might encourage the register allocator to fragment \
1982 the available FPR pairs. We need paired FPRs to store long \
1983 doubles, so it isn't clear that using a different order \
1984 for n32 would be a win. */ \
1985 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, \
1986 /* None of the remaining classes have defined call-saved \
1987 registers. */ \
1988 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
1989 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \
1990 96, 97, 98, 99, 100,101,102,103,104,105,106,107,108,109,110,111, \
1991 112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127, \
1992 128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143, \
1993 144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159, \
1994 160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175, \
1995 182,183,184,185,186,187 \
1996 }
1997
1998 /* ADJUST_REG_ALLOC_ORDER is a macro which permits reg_alloc_order
1999 to be rearranged based on a particular function. On the mips16, we
2000 want to allocate $24 (T_REG) before other registers for
2001 instructions for which it is possible. */
2002
2003 #define ADJUST_REG_ALLOC_ORDER mips_order_regs_for_local_alloc ()
2004
2005 /* True if VALUE is an unsigned 6-bit number. */
2006
2007 #define UIMM6_OPERAND(VALUE) \
2008 (((VALUE) & ~(unsigned HOST_WIDE_INT) 0x3f) == 0)
2009
2010 /* True if VALUE is a signed 10-bit number. */
2011
2012 #define IMM10_OPERAND(VALUE) \
2013 ((unsigned HOST_WIDE_INT) (VALUE) + 0x200 < 0x400)
2014
2015 /* True if VALUE is a signed 16-bit number. */
2016
2017 #define SMALL_OPERAND(VALUE) \
2018 ((unsigned HOST_WIDE_INT) (VALUE) + 0x8000 < 0x10000)
2019
2020 /* True if VALUE is an unsigned 16-bit number. */
2021
2022 #define SMALL_OPERAND_UNSIGNED(VALUE) \
2023 (((VALUE) & ~(unsigned HOST_WIDE_INT) 0xffff) == 0)
2024
2025 /* True if VALUE can be loaded into a register using LUI. */
2026
2027 #define LUI_OPERAND(VALUE) \
2028 (((VALUE) | 0x7fff0000) == 0x7fff0000 \
2029 || ((VALUE) | 0x7fff0000) + 0x10000 == 0)
2030
2031 /* Return a value X with the low 16 bits clear, and such that
2032 VALUE - X is a signed 16-bit value. */
2033
2034 #define CONST_HIGH_PART(VALUE) \
2035 (((VALUE) + 0x8000) & ~(unsigned HOST_WIDE_INT) 0xffff)
2036
2037 #define CONST_LOW_PART(VALUE) \
2038 ((VALUE) - CONST_HIGH_PART (VALUE))
2039
2040 #define SMALL_INT(X) SMALL_OPERAND (INTVAL (X))
2041 #define SMALL_INT_UNSIGNED(X) SMALL_OPERAND_UNSIGNED (INTVAL (X))
2042 #define LUI_INT(X) LUI_OPERAND (INTVAL (X))
2043
2044 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
2045 mips_preferred_reload_class (X, CLASS)
2046
2047 /* The HI and LO registers can only be reloaded via the general
2048 registers. Condition code registers can only be loaded to the
2049 general registers, and from the floating point registers. */
2050
2051 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
2052 mips_secondary_reload_class (CLASS, MODE, X, true)
2053 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
2054 mips_secondary_reload_class (CLASS, MODE, X, false)
2055
2056 /* Return the maximum number of consecutive registers
2057 needed to represent mode MODE in a register of class CLASS. */
2058
2059 #define CLASS_MAX_NREGS(CLASS, MODE) mips_class_max_nregs (CLASS, MODE)
2060
2061 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
2062 mips_cannot_change_mode_class (FROM, TO, CLASS)
2063 \f
2064 /* Stack layout; function entry, exit and calling. */
2065
2066 #define STACK_GROWS_DOWNWARD
2067
2068 #define FRAME_GROWS_DOWNWARD flag_stack_protect
2069
2070 /* Size of the area allocated in the frame to save the GP. */
2071
2072 #define MIPS_GP_SAVE_AREA_SIZE \
2073 (TARGET_CALL_CLOBBERED_GP ? MIPS_STACK_ALIGN (UNITS_PER_WORD) : 0)
2074
2075 /* The offset of the first local variable from the frame pointer. See
2076 mips_compute_frame_info for details about the frame layout. */
2077
2078 #define STARTING_FRAME_OFFSET \
2079 (FRAME_GROWS_DOWNWARD \
2080 ? 0 \
2081 : crtl->outgoing_args_size + MIPS_GP_SAVE_AREA_SIZE)
2082
2083 #define RETURN_ADDR_RTX mips_return_addr
2084
2085 /* Mask off the MIPS16 ISA bit in unwind addresses.
2086
2087 The reason for this is a little subtle. When unwinding a call,
2088 we are given the call's return address, which on most targets
2089 is the address of the following instruction. However, what we
2090 actually want to find is the EH region for the call itself.
2091 The target-independent unwind code therefore searches for "RA - 1".
2092
2093 In the MIPS16 case, RA is always an odd-valued (ISA-encoded) address.
2094 RA - 1 is therefore the real (even-valued) start of the return
2095 instruction. EH region labels are usually odd-valued MIPS16 symbols
2096 too, so a search for an even address within a MIPS16 region would
2097 usually work.
2098
2099 However, there is an exception. If the end of an EH region is also
2100 the end of a function, the end label is allowed to be even. This is
2101 necessary because a following non-MIPS16 function may also need EH
2102 information for its first instruction.
2103
2104 Thus a MIPS16 region may be terminated by an ISA-encoded or a
2105 non-ISA-encoded address. This probably isn't ideal, but it is
2106 the traditional (legacy) behavior. It is therefore only safe
2107 to search MIPS EH regions for an _odd-valued_ address.
2108
2109 Masking off the ISA bit means that the target-independent code
2110 will search for "(RA & -2) - 1", which is guaranteed to be odd. */
2111 #define MASK_RETURN_ADDR GEN_INT (-2)
2112
2113
2114 /* Similarly, don't use the least-significant bit to tell pointers to
2115 code from vtable index. */
2116
2117 #define TARGET_PTRMEMFUNC_VBIT_LOCATION ptrmemfunc_vbit_in_delta
2118
2119 /* The eliminations to $17 are only used for mips16 code. See the
2120 definition of HARD_FRAME_POINTER_REGNUM. */
2121
2122 #define ELIMINABLE_REGS \
2123 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
2124 { ARG_POINTER_REGNUM, GP_REG_FIRST + 30}, \
2125 { ARG_POINTER_REGNUM, GP_REG_FIRST + 17}, \
2126 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
2127 { FRAME_POINTER_REGNUM, GP_REG_FIRST + 30}, \
2128 { FRAME_POINTER_REGNUM, GP_REG_FIRST + 17}}
2129
2130 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
2131 (OFFSET) = mips_initial_elimination_offset ((FROM), (TO))
2132
2133 /* Allocate stack space for arguments at the beginning of each function. */
2134 #define ACCUMULATE_OUTGOING_ARGS 1
2135
2136 /* The argument pointer always points to the first argument. */
2137 #define FIRST_PARM_OFFSET(FNDECL) 0
2138
2139 /* o32 and o64 reserve stack space for all argument registers. */
2140 #define REG_PARM_STACK_SPACE(FNDECL) \
2141 (TARGET_OLDABI \
2142 ? (MAX_ARGS_IN_REGISTERS * UNITS_PER_WORD) \
2143 : 0)
2144
2145 /* Define this if it is the responsibility of the caller to
2146 allocate the area reserved for arguments passed in registers.
2147 If `ACCUMULATE_OUTGOING_ARGS' is also defined, the only effect
2148 of this macro is to determine whether the space is included in
2149 `crtl->outgoing_args_size'. */
2150 #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
2151
2152 #define STACK_BOUNDARY (TARGET_NEWABI ? 128 : 64)
2153 \f
2154 /* Symbolic macros for the registers used to return integer and floating
2155 point values. */
2156
2157 #define GP_RETURN (GP_REG_FIRST + 2)
2158 #define FP_RETURN ((TARGET_SOFT_FLOAT) ? GP_RETURN : (FP_REG_FIRST + 0))
2159
2160 #define MAX_ARGS_IN_REGISTERS (TARGET_OLDABI ? 4 : 8)
2161
2162 /* Symbolic macros for the first/last argument registers. */
2163
2164 #define GP_ARG_FIRST (GP_REG_FIRST + 4)
2165 #define GP_ARG_LAST (GP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
2166 #define FP_ARG_FIRST (FP_REG_FIRST + 12)
2167 #define FP_ARG_LAST (FP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
2168
2169 #define LIBCALL_VALUE(MODE) \
2170 mips_function_value (NULL_TREE, NULL_TREE, MODE)
2171
2172 #define FUNCTION_VALUE(VALTYPE, FUNC) \
2173 mips_function_value (VALTYPE, FUNC, VOIDmode)
2174
2175 /* 1 if N is a possible register number for a function value.
2176 On the MIPS, R2 R3 and F0 F2 are the only register thus used.
2177 Currently, R2 and F0 are only implemented here (C has no complex type) */
2178
2179 #define FUNCTION_VALUE_REGNO_P(N) ((N) == GP_RETURN || (N) == FP_RETURN \
2180 || (LONG_DOUBLE_TYPE_SIZE == 128 && FP_RETURN != GP_RETURN \
2181 && (N) == FP_RETURN + 2))
2182
2183 /* 1 if N is a possible register number for function argument passing.
2184 We have no FP argument registers when soft-float. When FP registers
2185 are 32 bits, we can't directly reference the odd numbered ones. */
2186
2187 #define FUNCTION_ARG_REGNO_P(N) \
2188 ((IN_RANGE((N), GP_ARG_FIRST, GP_ARG_LAST) \
2189 || (IN_RANGE((N), FP_ARG_FIRST, FP_ARG_LAST))) \
2190 && !fixed_regs[N])
2191 \f
2192 /* This structure has to cope with two different argument allocation
2193 schemes. Most MIPS ABIs view the arguments as a structure, of which
2194 the first N words go in registers and the rest go on the stack. If I
2195 < N, the Ith word might go in Ith integer argument register or in a
2196 floating-point register. For these ABIs, we only need to remember
2197 the offset of the current argument into the structure.
2198
2199 The EABI instead allocates the integer and floating-point arguments
2200 separately. The first N words of FP arguments go in FP registers,
2201 the rest go on the stack. Likewise, the first N words of the other
2202 arguments go in integer registers, and the rest go on the stack. We
2203 need to maintain three counts: the number of integer registers used,
2204 the number of floating-point registers used, and the number of words
2205 passed on the stack.
2206
2207 We could keep separate information for the two ABIs (a word count for
2208 the standard ABIs, and three separate counts for the EABI). But it
2209 seems simpler to view the standard ABIs as forms of EABI that do not
2210 allocate floating-point registers.
2211
2212 So for the standard ABIs, the first N words are allocated to integer
2213 registers, and mips_function_arg decides on an argument-by-argument
2214 basis whether that argument should really go in an integer register,
2215 or in a floating-point one. */
2216
2217 typedef struct mips_args {
2218 /* Always true for varargs functions. Otherwise true if at least
2219 one argument has been passed in an integer register. */
2220 int gp_reg_found;
2221
2222 /* The number of arguments seen so far. */
2223 unsigned int arg_number;
2224
2225 /* The number of integer registers used so far. For all ABIs except
2226 EABI, this is the number of words that have been added to the
2227 argument structure, limited to MAX_ARGS_IN_REGISTERS. */
2228 unsigned int num_gprs;
2229
2230 /* For EABI, the number of floating-point registers used so far. */
2231 unsigned int num_fprs;
2232
2233 /* The number of words passed on the stack. */
2234 unsigned int stack_words;
2235
2236 /* On the mips16, we need to keep track of which floating point
2237 arguments were passed in general registers, but would have been
2238 passed in the FP regs if this were a 32-bit function, so that we
2239 can move them to the FP regs if we wind up calling a 32-bit
2240 function. We record this information in fp_code, encoded in base
2241 four. A zero digit means no floating point argument, a one digit
2242 means an SFmode argument, and a two digit means a DFmode argument,
2243 and a three digit is not used. The low order digit is the first
2244 argument. Thus 6 == 1 * 4 + 2 means a DFmode argument followed by
2245 an SFmode argument. ??? A more sophisticated approach will be
2246 needed if MIPS_ABI != ABI_32. */
2247 int fp_code;
2248
2249 /* True if the function has a prototype. */
2250 int prototype;
2251 } CUMULATIVE_ARGS;
2252
2253 /* Initialize a variable CUM of type CUMULATIVE_ARGS
2254 for a call to a function whose data type is FNTYPE.
2255 For a library call, FNTYPE is 0. */
2256
2257 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
2258 mips_init_cumulative_args (&CUM, FNTYPE)
2259
2260 #define FUNCTION_ARG_BOUNDARY mips_function_arg_boundary
2261
2262 #define FUNCTION_ARG_PADDING(MODE, TYPE) \
2263 (mips_pad_arg_upward (MODE, TYPE) ? upward : downward)
2264
2265 #define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
2266 (mips_pad_reg_upward (MODE, TYPE) ? upward : downward)
2267
2268 /* True if using EABI and varargs can be passed in floating-point
2269 registers. Under these conditions, we need a more complex form
2270 of va_list, which tracks GPR, FPR and stack arguments separately. */
2271 #define EABI_FLOAT_VARARGS_P \
2272 (mips_abi == ABI_EABI && UNITS_PER_FPVALUE >= UNITS_PER_DOUBLE)
2273
2274 \f
2275 #define EPILOGUE_USES(REGNO) mips_epilogue_uses (REGNO)
2276
2277 /* Treat LOC as a byte offset from the stack pointer and round it up
2278 to the next fully-aligned offset. */
2279 #define MIPS_STACK_ALIGN(LOC) \
2280 (TARGET_NEWABI ? ((LOC) + 15) & -16 : ((LOC) + 7) & -8)
2281
2282 \f
2283 /* Output assembler code to FILE to increment profiler label # LABELNO
2284 for profiling a function entry. */
2285
2286 #define FUNCTION_PROFILER(FILE, LABELNO) mips_function_profiler ((FILE))
2287
2288 /* The profiler preserves all interesting registers, including $31. */
2289 #define MIPS_SAVE_REG_FOR_PROFILING_P(REGNO) false
2290
2291 /* No mips port has ever used the profiler counter word, so don't emit it
2292 or the label for it. */
2293
2294 #define NO_PROFILE_COUNTERS 1
2295
2296 /* Define this macro if the code for function profiling should come
2297 before the function prologue. Normally, the profiling code comes
2298 after. */
2299
2300 /* #define PROFILE_BEFORE_PROLOGUE */
2301
2302 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
2303 the stack pointer does not matter. The value is tested only in
2304 functions that have frame pointers.
2305 No definition is equivalent to always zero. */
2306
2307 #define EXIT_IGNORE_STACK 1
2308
2309 \f
2310 /* Trampolines are a block of code followed by two pointers. */
2311
2312 #define TRAMPOLINE_SIZE \
2313 (mips_trampoline_code_size () + GET_MODE_SIZE (ptr_mode) * 2)
2314
2315 /* Forcing a 64-bit alignment for 32-bit targets allows us to load two
2316 pointers from a single LUI base. */
2317
2318 #define TRAMPOLINE_ALIGNMENT 64
2319
2320 /* mips_trampoline_init calls this library function to flush
2321 program and data caches. */
2322
2323 #ifndef CACHE_FLUSH_FUNC
2324 #define CACHE_FLUSH_FUNC "_flush_cache"
2325 #endif
2326
2327 #define MIPS_ICACHE_SYNC(ADDR, SIZE) \
2328 /* Flush both caches. We need to flush the data cache in case \
2329 the system has a write-back cache. */ \
2330 emit_library_call (gen_rtx_SYMBOL_REF (Pmode, mips_cache_flush_func), \
2331 LCT_NORMAL, VOIDmode, 3, ADDR, Pmode, SIZE, Pmode, \
2332 GEN_INT (3), TYPE_MODE (integer_type_node))
2333
2334 \f
2335 /* Addressing modes, and classification of registers for them. */
2336
2337 #define REGNO_OK_FOR_INDEX_P(REGNO) 0
2338 #define REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) \
2339 mips_regno_mode_ok_for_base_p (REGNO, MODE, 1)
2340
2341 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2342 and check its validity for a certain class.
2343 We have two alternate definitions for each of them.
2344 The usual definition accepts all pseudo regs; the other rejects them all.
2345 The symbol REG_OK_STRICT causes the latter definition to be used.
2346
2347 Most source files want to accept pseudo regs in the hope that
2348 they will get allocated to the class that the insn wants them to be in.
2349 Some source files that are used after register allocation
2350 need to be strict. */
2351
2352 #ifndef REG_OK_STRICT
2353 #define REG_MODE_OK_FOR_BASE_P(X, MODE) \
2354 mips_regno_mode_ok_for_base_p (REGNO (X), MODE, 0)
2355 #else
2356 #define REG_MODE_OK_FOR_BASE_P(X, MODE) \
2357 mips_regno_mode_ok_for_base_p (REGNO (X), MODE, 1)
2358 #endif
2359
2360 #define REG_OK_FOR_INDEX_P(X) 0
2361
2362 \f
2363 /* Maximum number of registers that can appear in a valid memory address. */
2364
2365 #define MAX_REGS_PER_ADDRESS 1
2366
2367 /* Check for constness inline but use mips_legitimate_address_p
2368 to check whether a constant really is an address. */
2369
2370 #define CONSTANT_ADDRESS_P(X) \
2371 (CONSTANT_P (X) && memory_address_p (SImode, X))
2372
2373 #define LEGITIMATE_CONSTANT_P(X) (mips_const_insns (X) > 0)
2374
2375 /* This handles the magic '..CURRENT_FUNCTION' symbol, which means
2376 'the start of the function that this code is output in'. */
2377
2378 #define ASM_OUTPUT_LABELREF(FILE,NAME) \
2379 if (strcmp (NAME, "..CURRENT_FUNCTION") == 0) \
2380 asm_fprintf ((FILE), "%U%s", \
2381 XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0)); \
2382 else \
2383 asm_fprintf ((FILE), "%U%s", (NAME))
2384 \f
2385 /* Flag to mark a function decl symbol that requires a long call. */
2386 #define SYMBOL_FLAG_LONG_CALL (SYMBOL_FLAG_MACH_DEP << 0)
2387 #define SYMBOL_REF_LONG_CALL_P(X) \
2388 ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_LONG_CALL) != 0)
2389
2390 /* This flag marks functions that cannot be lazily bound. */
2391 #define SYMBOL_FLAG_BIND_NOW (SYMBOL_FLAG_MACH_DEP << 1)
2392 #define SYMBOL_REF_BIND_NOW_P(RTX) \
2393 ((SYMBOL_REF_FLAGS (RTX) & SYMBOL_FLAG_BIND_NOW) != 0)
2394
2395 /* True if we're generating a form of MIPS16 code in which jump tables
2396 are stored in the text section and encoded as 16-bit PC-relative
2397 offsets. This is only possible when general text loads are allowed,
2398 since the table access itself will be an "lh" instruction. */
2399 /* ??? 16-bit offsets can overflow in large functions. */
2400 #define TARGET_MIPS16_SHORT_JUMP_TABLES TARGET_MIPS16_TEXT_LOADS
2401
2402 #define JUMP_TABLES_IN_TEXT_SECTION TARGET_MIPS16_SHORT_JUMP_TABLES
2403
2404 #define CASE_VECTOR_MODE (TARGET_MIPS16_SHORT_JUMP_TABLES ? HImode : ptr_mode)
2405
2406 #define CASE_VECTOR_PC_RELATIVE TARGET_MIPS16_SHORT_JUMP_TABLES
2407
2408 /* Define this as 1 if `char' should by default be signed; else as 0. */
2409 #ifndef DEFAULT_SIGNED_CHAR
2410 #define DEFAULT_SIGNED_CHAR 1
2411 #endif
2412
2413 /* Although LDC1 and SDC1 provide 64-bit moves on 32-bit targets,
2414 we generally don't want to use them for copying arbitrary data.
2415 A single N-word move is usually the same cost as N single-word moves. */
2416 #define MOVE_MAX UNITS_PER_WORD
2417 #define MAX_MOVE_MAX 8
2418
2419 /* Define this macro as a C expression which is nonzero if
2420 accessing less than a word of memory (i.e. a `char' or a
2421 `short') is no faster than accessing a word of memory, i.e., if
2422 such access require more than one instruction or if there is no
2423 difference in cost between byte and (aligned) word loads.
2424
2425 On RISC machines, it tends to generate better code to define
2426 this as 1, since it avoids making a QI or HI mode register.
2427
2428 But, generating word accesses for -mips16 is generally bad as shifts
2429 (often extended) would be needed for byte accesses. */
2430 #define SLOW_BYTE_ACCESS (!TARGET_MIPS16)
2431
2432 /* Standard MIPS integer shifts truncate the shift amount to the
2433 width of the shifted operand. However, Loongson vector shifts
2434 do not truncate the shift amount at all. */
2435 #define SHIFT_COUNT_TRUNCATED (!TARGET_LOONGSON_2EF)
2436
2437 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
2438 is done just by pretending it is already truncated. */
2439 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) \
2440 (TARGET_64BIT ? ((INPREC) <= 32 || (OUTPREC) > 32) : 1)
2441
2442
2443 /* Specify the machine mode that pointers have.
2444 After generation of rtl, the compiler makes no further distinction
2445 between pointers and any other objects of this machine mode. */
2446
2447 #ifndef Pmode
2448 #define Pmode (TARGET_64BIT && TARGET_LONG64 ? DImode : SImode)
2449 #endif
2450
2451 /* Give call MEMs SImode since it is the "most permissive" mode
2452 for both 32-bit and 64-bit targets. */
2453
2454 #define FUNCTION_MODE SImode
2455
2456 \f
2457
2458 /* Define if copies to/from condition code registers should be avoided.
2459
2460 This is needed for the MIPS because reload_outcc is not complete;
2461 it needs to handle cases where the source is a general or another
2462 condition code register. */
2463 #define AVOID_CCMODE_COPIES
2464
2465 /* A C expression for the cost of a branch instruction. A value of
2466 1 is the default; other values are interpreted relative to that. */
2467
2468 #define BRANCH_COST(speed_p, predictable_p) mips_branch_cost
2469 #define LOGICAL_OP_NON_SHORT_CIRCUIT 0
2470
2471 /* If defined, modifies the length assigned to instruction INSN as a
2472 function of the context in which it is used. LENGTH is an lvalue
2473 that contains the initially computed length of the insn and should
2474 be updated with the correct length of the insn. */
2475 #define ADJUST_INSN_LENGTH(INSN, LENGTH) \
2476 ((LENGTH) = mips_adjust_insn_length ((INSN), (LENGTH)))
2477
2478 /* Return the asm template for a non-MIPS16 conditional branch instruction.
2479 OPCODE is the opcode's mnemonic and OPERANDS is the asm template for
2480 its operands. */
2481 #define MIPS_BRANCH(OPCODE, OPERANDS) \
2482 "%*" OPCODE "%?\t" OPERANDS "%/"
2483
2484 /* Return an asm string that forces INSN to be treated as an absolute
2485 J or JAL instruction instead of an assembler macro. */
2486 #define MIPS_ABSOLUTE_JUMP(INSN) \
2487 (TARGET_ABICALLS_PIC2 \
2488 ? ".option\tpic0\n\t" INSN "\n\t.option\tpic2" \
2489 : INSN)
2490
2491 /* Return the asm template for a call. INSN is the instruction's mnemonic
2492 ("j" or "jal"), OPERANDS are its operands, TARGET_OPNO is the operand
2493 number of the target. SIZE_OPNO is the operand number of the argument size
2494 operand that can optionally hold the call attributes. If SIZE_OPNO is not
2495 -1 and the call is indirect, use the function symbol from the call
2496 attributes to attach a R_MIPS_JALR relocation to the call.
2497
2498 When generating GOT code without explicit relocation operators,
2499 all calls should use assembly macros. Otherwise, all indirect
2500 calls should use "jr" or "jalr"; we will arrange to restore $gp
2501 afterwards if necessary. Finally, we can only generate direct
2502 calls for -mabicalls by temporarily switching to non-PIC mode. */
2503 #define MIPS_CALL(INSN, OPERANDS, TARGET_OPNO, SIZE_OPNO) \
2504 (TARGET_USE_GOT && !TARGET_EXPLICIT_RELOCS \
2505 ? "%*" INSN "\t%" #TARGET_OPNO "%/" \
2506 : (REG_P (OPERANDS[TARGET_OPNO]) \
2507 && mips_get_pic_call_symbol (OPERANDS, SIZE_OPNO)) \
2508 ? ("%*.reloc\t1f,R_MIPS_JALR,%" #SIZE_OPNO "\n" \
2509 "1:\t" INSN "r\t%" #TARGET_OPNO "%/") \
2510 : REG_P (OPERANDS[TARGET_OPNO]) \
2511 ? "%*" INSN "r\t%" #TARGET_OPNO "%/" \
2512 : MIPS_ABSOLUTE_JUMP ("%*" INSN "\t%" #TARGET_OPNO "%/"))
2513 \f
2514 /* Control the assembler format that we output. */
2515
2516 /* Output to assembler file text saying following lines
2517 may contain character constants, extra white space, comments, etc. */
2518
2519 #ifndef ASM_APP_ON
2520 #define ASM_APP_ON " #APP\n"
2521 #endif
2522
2523 /* Output to assembler file text saying following lines
2524 no longer contain unusual constructs. */
2525
2526 #ifndef ASM_APP_OFF
2527 #define ASM_APP_OFF " #NO_APP\n"
2528 #endif
2529
2530 #define REGISTER_NAMES \
2531 { "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", \
2532 "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", \
2533 "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", \
2534 "$24", "$25", "$26", "$27", "$28", "$sp", "$fp", "$31", \
2535 "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", \
2536 "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", \
2537 "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", \
2538 "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31", \
2539 "hi", "lo", "", "$fcc0","$fcc1","$fcc2","$fcc3","$fcc4", \
2540 "$fcc5","$fcc6","$fcc7","", "$cprestore", "$arg", "$frame", "$fakec", \
2541 "$c0r0", "$c0r1", "$c0r2", "$c0r3", "$c0r4", "$c0r5", "$c0r6", "$c0r7", \
2542 "$c0r8", "$c0r9", "$c0r10","$c0r11","$c0r12","$c0r13","$c0r14","$c0r15", \
2543 "$c0r16","$c0r17","$c0r18","$c0r19","$c0r20","$c0r21","$c0r22","$c0r23", \
2544 "$c0r24","$c0r25","$c0r26","$c0r27","$c0r28","$c0r29","$c0r30","$c0r31", \
2545 "$c2r0", "$c2r1", "$c2r2", "$c2r3", "$c2r4", "$c2r5", "$c2r6", "$c2r7", \
2546 "$c2r8", "$c2r9", "$c2r10","$c2r11","$c2r12","$c2r13","$c2r14","$c2r15", \
2547 "$c2r16","$c2r17","$c2r18","$c2r19","$c2r20","$c2r21","$c2r22","$c2r23", \
2548 "$c2r24","$c2r25","$c2r26","$c2r27","$c2r28","$c2r29","$c2r30","$c2r31", \
2549 "$c3r0", "$c3r1", "$c3r2", "$c3r3", "$c3r4", "$c3r5", "$c3r6", "$c3r7", \
2550 "$c3r8", "$c3r9", "$c3r10","$c3r11","$c3r12","$c3r13","$c3r14","$c3r15", \
2551 "$c3r16","$c3r17","$c3r18","$c3r19","$c3r20","$c3r21","$c3r22","$c3r23", \
2552 "$c3r24","$c3r25","$c3r26","$c3r27","$c3r28","$c3r29","$c3r30","$c3r31", \
2553 "$ac1hi","$ac1lo","$ac2hi","$ac2lo","$ac3hi","$ac3lo","$dsp_po","$dsp_sc", \
2554 "$dsp_ca","$dsp_ou","$dsp_cc","$dsp_ef" }
2555
2556 /* List the "software" names for each register. Also list the numerical
2557 names for $fp and $sp. */
2558
2559 #define ADDITIONAL_REGISTER_NAMES \
2560 { \
2561 { "$29", 29 + GP_REG_FIRST }, \
2562 { "$30", 30 + GP_REG_FIRST }, \
2563 { "at", 1 + GP_REG_FIRST }, \
2564 { "v0", 2 + GP_REG_FIRST }, \
2565 { "v1", 3 + GP_REG_FIRST }, \
2566 { "a0", 4 + GP_REG_FIRST }, \
2567 { "a1", 5 + GP_REG_FIRST }, \
2568 { "a2", 6 + GP_REG_FIRST }, \
2569 { "a3", 7 + GP_REG_FIRST }, \
2570 { "t0", 8 + GP_REG_FIRST }, \
2571 { "t1", 9 + GP_REG_FIRST }, \
2572 { "t2", 10 + GP_REG_FIRST }, \
2573 { "t3", 11 + GP_REG_FIRST }, \
2574 { "t4", 12 + GP_REG_FIRST }, \
2575 { "t5", 13 + GP_REG_FIRST }, \
2576 { "t6", 14 + GP_REG_FIRST }, \
2577 { "t7", 15 + GP_REG_FIRST }, \
2578 { "s0", 16 + GP_REG_FIRST }, \
2579 { "s1", 17 + GP_REG_FIRST }, \
2580 { "s2", 18 + GP_REG_FIRST }, \
2581 { "s3", 19 + GP_REG_FIRST }, \
2582 { "s4", 20 + GP_REG_FIRST }, \
2583 { "s5", 21 + GP_REG_FIRST }, \
2584 { "s6", 22 + GP_REG_FIRST }, \
2585 { "s7", 23 + GP_REG_FIRST }, \
2586 { "t8", 24 + GP_REG_FIRST }, \
2587 { "t9", 25 + GP_REG_FIRST }, \
2588 { "k0", 26 + GP_REG_FIRST }, \
2589 { "k1", 27 + GP_REG_FIRST }, \
2590 { "gp", 28 + GP_REG_FIRST }, \
2591 { "sp", 29 + GP_REG_FIRST }, \
2592 { "fp", 30 + GP_REG_FIRST }, \
2593 { "ra", 31 + GP_REG_FIRST }, \
2594 ALL_COP_ADDITIONAL_REGISTER_NAMES \
2595 }
2596
2597 /* This is meant to be redefined in the host dependent files. It is a
2598 set of alternative names and regnums for mips coprocessors. */
2599
2600 #define ALL_COP_ADDITIONAL_REGISTER_NAMES
2601
2602 #define DBR_OUTPUT_SEQEND(STREAM) \
2603 do \
2604 { \
2605 /* Undo the effect of '%*'. */ \
2606 mips_pop_asm_switch (&mips_nomacro); \
2607 mips_pop_asm_switch (&mips_noreorder); \
2608 /* Emit a blank line after the delay slot for emphasis. */ \
2609 fputs ("\n", STREAM); \
2610 } \
2611 while (0)
2612
2613 /* mips-tfile does not understand .stabd directives. */
2614 #define DBX_OUTPUT_SOURCE_LINE(STREAM, LINE, COUNTER) do { \
2615 dbxout_begin_stabn_sline (LINE); \
2616 dbxout_stab_value_internal_label ("LM", &COUNTER); \
2617 } while (0)
2618
2619 /* Use .loc directives for SDB line numbers. */
2620 #define SDB_OUTPUT_SOURCE_LINE(STREAM, LINE) \
2621 fprintf (STREAM, "\t.loc\t%d %d\n", num_source_filenames, LINE)
2622
2623 /* The MIPS implementation uses some labels for its own purpose. The
2624 following lists what labels are created, and are all formed by the
2625 pattern $L[a-z].*. The machine independent portion of GCC creates
2626 labels matching: $L[A-Z][0-9]+ and $L[0-9]+.
2627
2628 LM[0-9]+ Silicon Graphics/ECOFF stabs label before each stmt.
2629 $Lb[0-9]+ Begin blocks for MIPS debug support
2630 $Lc[0-9]+ Label for use in s<xx> operation.
2631 $Le[0-9]+ End blocks for MIPS debug support */
2632
2633 #undef ASM_DECLARE_OBJECT_NAME
2634 #define ASM_DECLARE_OBJECT_NAME(STREAM, NAME, DECL) \
2635 mips_declare_object (STREAM, NAME, "", ":\n")
2636
2637 /* Globalizing directive for a label. */
2638 #define GLOBAL_ASM_OP "\t.globl\t"
2639
2640 /* This says how to define a global common symbol. */
2641
2642 #define ASM_OUTPUT_ALIGNED_DECL_COMMON mips_output_aligned_decl_common
2643
2644 /* This says how to define a local common symbol (i.e., not visible to
2645 linker). */
2646
2647 #ifndef ASM_OUTPUT_ALIGNED_LOCAL
2648 #define ASM_OUTPUT_ALIGNED_LOCAL(STREAM, NAME, SIZE, ALIGN) \
2649 mips_declare_common_object (STREAM, NAME, "\n\t.lcomm\t", SIZE, ALIGN, false)
2650 #endif
2651
2652 /* This says how to output an external. It would be possible not to
2653 output anything and let undefined symbol become external. However
2654 the assembler uses length information on externals to allocate in
2655 data/sdata bss/sbss, thereby saving exec time. */
2656
2657 #undef ASM_OUTPUT_EXTERNAL
2658 #define ASM_OUTPUT_EXTERNAL(STREAM,DECL,NAME) \
2659 mips_output_external(STREAM,DECL,NAME)
2660
2661 /* This is how to declare a function name. The actual work of
2662 emitting the label is moved to function_prologue, so that we can
2663 get the line number correctly emitted before the .ent directive,
2664 and after any .file directives. Define as empty so that the function
2665 is not declared before the .ent directive elsewhere. */
2666
2667 #undef ASM_DECLARE_FUNCTION_NAME
2668 #define ASM_DECLARE_FUNCTION_NAME(STREAM,NAME,DECL)
2669
2670 /* This is how to store into the string LABEL
2671 the symbol_ref name of an internal numbered label where
2672 PREFIX is the class of label and NUM is the number within the class.
2673 This is suitable for output with `assemble_name'. */
2674
2675 #undef ASM_GENERATE_INTERNAL_LABEL
2676 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
2677 sprintf ((LABEL), "*%s%s%ld", (LOCAL_LABEL_PREFIX), (PREFIX), (long)(NUM))
2678
2679 /* Print debug labels as "foo = ." rather than "foo:" because they should
2680 represent a byte pointer rather than an ISA-encoded address. This is
2681 particularly important for code like:
2682
2683 $LFBxxx = .
2684 .cfi_startproc
2685 ...
2686 .section .gcc_except_table,...
2687 ...
2688 .uleb128 foo-$LFBxxx
2689
2690 The .uleb128 requies $LFBxxx to match the FDE start address, which is
2691 likewise a byte pointer rather than an ISA-encoded address.
2692
2693 At the time of writing, this hook is not used for the function end
2694 label:
2695
2696 $LFExxx:
2697 .end foo
2698
2699 But this doesn't matter, because GAS doesn't treat a pre-.end label
2700 as a MIPS16 one anyway. */
2701
2702 #define ASM_OUTPUT_DEBUG_LABEL(FILE, PREFIX, NUM) \
2703 fprintf (FILE, "%s%s%d = .\n", LOCAL_LABEL_PREFIX, PREFIX, NUM)
2704
2705 /* This is how to output an element of a case-vector that is absolute. */
2706
2707 #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
2708 fprintf (STREAM, "\t%s\t%sL%d\n", \
2709 ptr_mode == DImode ? ".dword" : ".word", \
2710 LOCAL_LABEL_PREFIX, \
2711 VALUE)
2712
2713 /* This is how to output an element of a case-vector. We can make the
2714 entries PC-relative in MIPS16 code and GP-relative when .gp(d)word
2715 is supported. */
2716
2717 #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
2718 do { \
2719 if (TARGET_MIPS16_SHORT_JUMP_TABLES) \
2720 fprintf (STREAM, "\t.half\t%sL%d-%sL%d\n", \
2721 LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL); \
2722 else if (TARGET_GPWORD) \
2723 fprintf (STREAM, "\t%s\t%sL%d\n", \
2724 ptr_mode == DImode ? ".gpdword" : ".gpword", \
2725 LOCAL_LABEL_PREFIX, VALUE); \
2726 else if (TARGET_RTP_PIC) \
2727 { \
2728 /* Make the entry relative to the start of the function. */ \
2729 rtx fnsym = XEXP (DECL_RTL (current_function_decl), 0); \
2730 fprintf (STREAM, "\t%s\t%sL%d-", \
2731 Pmode == DImode ? ".dword" : ".word", \
2732 LOCAL_LABEL_PREFIX, VALUE); \
2733 assemble_name (STREAM, XSTR (fnsym, 0)); \
2734 fprintf (STREAM, "\n"); \
2735 } \
2736 else \
2737 fprintf (STREAM, "\t%s\t%sL%d\n", \
2738 ptr_mode == DImode ? ".dword" : ".word", \
2739 LOCAL_LABEL_PREFIX, VALUE); \
2740 } while (0)
2741
2742 /* This is how to output an assembler line
2743 that says to advance the location counter
2744 to a multiple of 2**LOG bytes. */
2745
2746 #define ASM_OUTPUT_ALIGN(STREAM,LOG) \
2747 fprintf (STREAM, "\t.align\t%d\n", (LOG))
2748
2749 /* This is how to output an assembler line to advance the location
2750 counter by SIZE bytes. */
2751
2752 #undef ASM_OUTPUT_SKIP
2753 #define ASM_OUTPUT_SKIP(STREAM,SIZE) \
2754 fprintf (STREAM, "\t.space\t"HOST_WIDE_INT_PRINT_UNSIGNED"\n", (SIZE))
2755
2756 /* This is how to output a string. */
2757 #undef ASM_OUTPUT_ASCII
2758 #define ASM_OUTPUT_ASCII mips_output_ascii
2759
2760 /* Output #ident as a in the read-only data section. */
2761 #undef ASM_OUTPUT_IDENT
2762 #define ASM_OUTPUT_IDENT(FILE, STRING) \
2763 { \
2764 const char *p = STRING; \
2765 int size = strlen (p) + 1; \
2766 switch_to_section (readonly_data_section); \
2767 assemble_string (p, size); \
2768 }
2769 \f
2770 /* Default to -G 8 */
2771 #ifndef MIPS_DEFAULT_GVALUE
2772 #define MIPS_DEFAULT_GVALUE 8
2773 #endif
2774
2775 /* Define the strings to put out for each section in the object file. */
2776 #define TEXT_SECTION_ASM_OP "\t.text" /* instructions */
2777 #define DATA_SECTION_ASM_OP "\t.data" /* large data */
2778
2779 #undef READONLY_DATA_SECTION_ASM_OP
2780 #define READONLY_DATA_SECTION_ASM_OP "\t.rdata" /* read-only data */
2781 \f
2782 #define ASM_OUTPUT_REG_PUSH(STREAM,REGNO) \
2783 do \
2784 { \
2785 fprintf (STREAM, "\t%s\t%s,%s,-8\n\t%s\t%s,0(%s)\n", \
2786 TARGET_64BIT ? "daddiu" : "addiu", \
2787 reg_names[STACK_POINTER_REGNUM], \
2788 reg_names[STACK_POINTER_REGNUM], \
2789 TARGET_64BIT ? "sd" : "sw", \
2790 reg_names[REGNO], \
2791 reg_names[STACK_POINTER_REGNUM]); \
2792 } \
2793 while (0)
2794
2795 #define ASM_OUTPUT_REG_POP(STREAM,REGNO) \
2796 do \
2797 { \
2798 mips_push_asm_switch (&mips_noreorder); \
2799 fprintf (STREAM, "\t%s\t%s,0(%s)\n\t%s\t%s,%s,8\n", \
2800 TARGET_64BIT ? "ld" : "lw", \
2801 reg_names[REGNO], \
2802 reg_names[STACK_POINTER_REGNUM], \
2803 TARGET_64BIT ? "daddu" : "addu", \
2804 reg_names[STACK_POINTER_REGNUM], \
2805 reg_names[STACK_POINTER_REGNUM]); \
2806 mips_pop_asm_switch (&mips_noreorder); \
2807 } \
2808 while (0)
2809
2810 /* How to start an assembler comment.
2811 The leading space is important (the mips native assembler requires it). */
2812 #ifndef ASM_COMMENT_START
2813 #define ASM_COMMENT_START " #"
2814 #endif
2815 \f
2816 /* Default definitions for size_t and ptrdiff_t. We must override the
2817 definitions from ../svr4.h on mips-*-linux-gnu. */
2818
2819 #undef SIZE_TYPE
2820 #define SIZE_TYPE (POINTER_SIZE == 64 ? "long unsigned int" : "unsigned int")
2821
2822 #undef PTRDIFF_TYPE
2823 #define PTRDIFF_TYPE (POINTER_SIZE == 64 ? "long int" : "int")
2824
2825 /* The maximum number of bytes that can be copied by one iteration of
2826 a movmemsi loop; see mips_block_move_loop. */
2827 #define MIPS_MAX_MOVE_BYTES_PER_LOOP_ITER \
2828 (UNITS_PER_WORD * 4)
2829
2830 /* The maximum number of bytes that can be copied by a straight-line
2831 implementation of movmemsi; see mips_block_move_straight. We want
2832 to make sure that any loop-based implementation will iterate at
2833 least twice. */
2834 #define MIPS_MAX_MOVE_BYTES_STRAIGHT \
2835 (MIPS_MAX_MOVE_BYTES_PER_LOOP_ITER * 2)
2836
2837 /* The base cost of a memcpy call, for MOVE_RATIO and friends. These
2838 values were determined experimentally by benchmarking with CSiBE.
2839 In theory, the call overhead is higher for TARGET_ABICALLS (especially
2840 for o32 where we have to restore $gp afterwards as well as make an
2841 indirect call), but in practice, bumping this up higher for
2842 TARGET_ABICALLS doesn't make much difference to code size. */
2843
2844 #define MIPS_CALL_RATIO 8
2845
2846 /* Any loop-based implementation of movmemsi will have at least
2847 MIPS_MAX_MOVE_BYTES_STRAIGHT / UNITS_PER_WORD memory-to-memory
2848 moves, so allow individual copies of fewer elements.
2849
2850 When movmemsi is not available, use a value approximating
2851 the length of a memcpy call sequence, so that move_by_pieces
2852 will generate inline code if it is shorter than a function call.
2853 Since move_by_pieces_ninsns counts memory-to-memory moves, but
2854 we'll have to generate a load/store pair for each, halve the
2855 value of MIPS_CALL_RATIO to take that into account. */
2856
2857 #define MOVE_RATIO(speed) \
2858 (HAVE_movmemsi \
2859 ? MIPS_MAX_MOVE_BYTES_STRAIGHT / MOVE_MAX \
2860 : MIPS_CALL_RATIO / 2)
2861
2862 /* movmemsi is meant to generate code that is at least as good as
2863 move_by_pieces. However, movmemsi effectively uses a by-pieces
2864 implementation both for moves smaller than a word and for word-aligned
2865 moves of no more than MIPS_MAX_MOVE_BYTES_STRAIGHT bytes. We should
2866 allow the tree-level optimisers to do such moves by pieces, as it
2867 often exposes other optimization opportunities. We might as well
2868 continue to use movmemsi at the rtl level though, as it produces
2869 better code when scheduling is disabled (such as at -O). */
2870
2871 #define MOVE_BY_PIECES_P(SIZE, ALIGN) \
2872 (HAVE_movmemsi \
2873 ? (!currently_expanding_to_rtl \
2874 && ((ALIGN) < BITS_PER_WORD \
2875 ? (SIZE) < UNITS_PER_WORD \
2876 : (SIZE) <= MIPS_MAX_MOVE_BYTES_STRAIGHT)) \
2877 : (move_by_pieces_ninsns (SIZE, ALIGN, MOVE_MAX_PIECES + 1) \
2878 < (unsigned int) MOVE_RATIO (false)))
2879
2880 /* For CLEAR_RATIO, when optimizing for size, give a better estimate
2881 of the length of a memset call, but use the default otherwise. */
2882
2883 #define CLEAR_RATIO(speed)\
2884 ((speed) ? 15 : MIPS_CALL_RATIO)
2885
2886 /* This is similar to CLEAR_RATIO, but for a non-zero constant, so when
2887 optimizing for size adjust the ratio to account for the overhead of
2888 loading the constant and replicating it across the word. */
2889
2890 #define SET_RATIO(speed) \
2891 ((speed) ? 15 : MIPS_CALL_RATIO - 2)
2892
2893 /* STORE_BY_PIECES_P can be used when copying a constant string, but
2894 in that case each word takes 3 insns (lui, ori, sw), or more in
2895 64-bit mode, instead of 2 (lw, sw). For now we always fail this
2896 and let the move_by_pieces code copy the string from read-only
2897 memory. In the future, this could be tuned further for multi-issue
2898 CPUs that can issue stores down one pipe and arithmetic instructions
2899 down another; in that case, the lui/ori/sw combination would be a
2900 win for long enough strings. */
2901
2902 #define STORE_BY_PIECES_P(SIZE, ALIGN) 0
2903 \f
2904 #ifndef __mips16
2905 /* Since the bits of the _init and _fini function is spread across
2906 many object files, each potentially with its own GP, we must assume
2907 we need to load our GP. We don't preserve $gp or $ra, since each
2908 init/fini chunk is supposed to initialize $gp, and crti/crtn
2909 already take care of preserving $ra and, when appropriate, $gp. */
2910 #if (defined _ABIO32 && _MIPS_SIM == _ABIO32)
2911 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
2912 asm (SECTION_OP "\n\
2913 .set noreorder\n\
2914 bal 1f\n\
2915 nop\n\
2916 1: .cpload $31\n\
2917 .set reorder\n\
2918 jal " USER_LABEL_PREFIX #FUNC "\n\
2919 " TEXT_SECTION_ASM_OP);
2920 #endif /* Switch to #elif when we're no longer limited by K&R C. */
2921 #if (defined _ABIN32 && _MIPS_SIM == _ABIN32) \
2922 || (defined _ABI64 && _MIPS_SIM == _ABI64)
2923 #define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
2924 asm (SECTION_OP "\n\
2925 .set noreorder\n\
2926 bal 1f\n\
2927 nop\n\
2928 1: .set reorder\n\
2929 .cpsetup $31, $2, 1b\n\
2930 jal " USER_LABEL_PREFIX #FUNC "\n\
2931 " TEXT_SECTION_ASM_OP);
2932 #endif
2933 #endif
2934
2935 #ifndef HAVE_AS_TLS
2936 #define HAVE_AS_TLS 0
2937 #endif
2938
2939 #ifndef USED_FOR_TARGET
2940 /* Information about ".set noFOO; ...; .set FOO" blocks. */
2941 struct mips_asm_switch {
2942 /* The FOO in the description above. */
2943 const char *name;
2944
2945 /* The current block nesting level, or 0 if we aren't in a block. */
2946 int nesting_level;
2947 };
2948
2949 extern const enum reg_class mips_regno_to_class[];
2950 extern bool mips_hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER];
2951 extern const char *current_function_file; /* filename current function is in */
2952 extern int num_source_filenames; /* current .file # */
2953 extern struct mips_asm_switch mips_noreorder;
2954 extern struct mips_asm_switch mips_nomacro;
2955 extern struct mips_asm_switch mips_noat;
2956 extern int mips_dbx_regno[];
2957 extern int mips_dwarf_regno[];
2958 extern bool mips_split_p[];
2959 extern bool mips_split_hi_p[];
2960 extern enum processor mips_arch; /* which cpu to codegen for */
2961 extern enum processor mips_tune; /* which cpu to schedule for */
2962 extern int mips_isa; /* architectural level */
2963 extern int mips_abi; /* which ABI to use */
2964 extern const struct mips_cpu_info *mips_arch_info;
2965 extern const struct mips_cpu_info *mips_tune_info;
2966 extern bool mips_base_mips16;
2967 extern enum mips_code_readable_setting mips_code_readable;
2968 extern GTY(()) struct target_globals *mips16_globals;
2969 #endif
2970
2971 /* Enable querying of DFA units. */
2972 #define CPU_UNITS_QUERY 1
2973
2974 #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
2975 mips_final_prescan_insn (INSN, OPVEC, NOPERANDS)
2976
2977 /* As on most targets, we want the .eh_frame section to be read-only where
2978 possible. And as on most targets, this means two things:
2979
2980 (a) Non-locally-binding pointers must have an indirect encoding,
2981 so that the addresses in the .eh_frame section itself become
2982 locally-binding.
2983
2984 (b) A shared library's .eh_frame section must encode locally-binding
2985 pointers in a relative (relocation-free) form.
2986
2987 However, MIPS has traditionally not allowed directives like:
2988
2989 .long x-.
2990
2991 in cases where "x" is in a different section, or is not defined in the
2992 same assembly file. We are therefore unable to emit the PC-relative
2993 form required by (b) at assembly time.
2994
2995 Fortunately, the linker is able to convert absolute addresses into
2996 PC-relative addresses on our behalf. Unfortunately, only certain
2997 versions of the linker know how to do this for indirect pointers,
2998 and for personality data. We must fall back on using writable
2999 .eh_frame sections for shared libraries if the linker does not
3000 support this feature. */
3001 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
3002 (((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_absptr)
3003
3004 /* For switching between MIPS16 and non-MIPS16 modes. */
3005 #define SWITCHABLE_TARGET 1