Missed a file from previous check-in.

[gcc.git] / gcc / config.gcc

# GCC build-, host- and target-specific configuration file.
# Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.

#This file is part of GCC.

#GCC is free software; you can redistribute it and/or modify it under
#the terms of the GNU General Public License as published by the Free
#Software Foundation; either version 2, or (at your option) any later
#version.

#GCC is distributed in the hope that it will be useful, but WITHOUT
#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
#FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
#for more details.

#You should have received a copy of the GNU General Public License
#along with GCC; see the file COPYING.  If not, write to the Free
#Software Foundation, 59 Temple Place - Suite 330, Boston, MA
#02111-1307, USA.

# This is the GCC build-, host- and target-specific configuration file
# where a configuration type, as recognized and generated by config.bfd,
# is mapped to different system-specific definitions and files.  This is
# invoked by the autoconf-generated configure script, called for build,
# host and target in that order, setting ${machine} to each.  Putting it
# in a separate shell file lets us skip running autoconf when modifying
# build-, host- and target-specific information.

# This file switches on the shell variable ${machine}, and also uses the
# following shell variables:
#
#  with_*               Various variables as set by configure.
#
#  enable_threads_flag  Either the name, yes or no depending on whether
#                       threads support was requested.
#
#  gas_flag             Either yes or no depending on whether GNU as was
#                       requested.
#
#  gnu_ld_flag          Either yes or no depending on whether GNU ld was
#                       requested.

# This file sets the following shell variables for use by the
# autoconf-generated configure script:
#
#  cpu_type             The name of the cpu, if different from machine.
#
#  tm_file              A list of target macro files, if different from
#                       "$cpu_type/$cpu_type.h". Usually it's constructed
#                       per target in a way like this:
#                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
#                       Note that the preferred order is:
#                       - specific target header "${cpu_type}/${cpu_type.h}"
#                       - generic headers like dbxelf.h elfos.h, netware.h, etc.
#                       - specializing target headers like ${cpu_type.h}/elf.h
#                       This helps to keep OS specific stuff out of the CPU
#                       defining header ${cpu_type}/${cpu_type.h}.
#
#  tm_p_file            Location of file with declarations for functions
#                       in $out_file.
#
#  out_file             The name of the machine description C support
#                       file, if different from "$cpu_type/$cpu_type.c".
#
#  md_file              The name of the machine-description file, if
#                       different from "$cpu_type/$cpu_type.md".
#
#  tmake_file           A list of machine-description-specific
#                       makefile-fragments, if different from
#                       "$cpu_type/t-$cpu_type".
#
#  extra_modes          The name of the file containing a list of extra
#                       machine modes, if necessary and different from
#                       "$cpu_type/$cpu_type-modes.def".
#
#  float_format         Set to the symbolic name for the floating-point
#                       formats used for this machine, if different from
#                       "i64".  Used to derive a header file name to
#                       include, like "vax" for "float-vax.h".  If no such
#                       file is wanted, set to "none".
#
#  extra_objs           List of extra objects that should be linked into
#                       the compiler proper (cc1, cc1obj, cc1plus)
#                       depending on target.
#
#  extra_headers        List of used header files from the directory
#                       config/${cpu_type}.
#
#  host_xmake_file      List of host-specific makefile-fragments.
#
#  extra_passes         List of extra executables compiled for this target
#                       machine, used for compiling from source to object.
#
#  extra_parts          List of extra object files that should be compiled
#                       for this target machine.
#
#  extra_programs       Like extra_passes, but these are used when linking.
#
#  host_extra_objs      List of extra host-dependent objects that should
#                       be linked into the compiler proper.
#
#  host_extra_gcc_objs  List of extra host-dependent objects that should
#                       be linked into the gcc driver.
#
#  c_target_objs        List of extra target-dependent objects that be
#                       linked into the C compiler only.
#
#  cxx_target_objs      List of extra target-dependent objects that be
#                       linked into the C++ compiler only.
#
#  build_xm_defines     List of macros to define when compiling for the
#                       build machine.
#
#  build_xm_file        List of files to include when compiling for the
#                       build machine.
#
#  host_xm_defines      List of macros to define when compiling for the
#                       host machine.
#
#  host_xm_file         List of files to include when compiling for the
#                       host machine.
#
#  xm_defines           List of macros to define when compiling for the
#                       target machine.
#
#  xm_file              List of files to include when compiling for the
#                       target machine.
#
#  use_collect2         Set to yes or no, depending on whether collect2
#                       will be used.
#
#  target_cpu_default   Set to override the default target model.
#
#  build_install_headers_dir
#                       Target to use when installing header files.
#
#  host_truncate_target
#                       Non-empty if the target name should be truncated
#                       on this host, due to filename length issues.
#
#  gdb_needs_out_file_path
#                       Set to yes if gdb needs a dir command with
#                       `dirname $out_file`.
#
#  build_exeext         Set to the suffix, if the build machine requires
#                       executables to have a file name suffix.
#
#  host_exeext          Set to the suffix, if the host machine requires
#                       executables to have a file name suffix.
#
#  thread_file          Set to control which thread package to use.
#
#  gas                  Set to yes or no depending on whether the target
#                       system normally uses GNU as.

# The following variables are used in each case-construct to build up the
# outgoing variables:
#
#  xmake_file           Makefile-fragment when this system is as a host,
#                       for host_xmake_file.
#
#  extra_host_objs      List of extra objects that should be linked into
#                       the compiler proper when this system is a host,
#                       for host_extra_objs.
#
#  install_headers_dir  Makefile-target for how the header file directory
#                       is installed, when this system is a build system,
#                       for build_install_headers_dir.
#
#  truncate_target      Non-empty if the target name should be truncated
#                       when this system is a host, due to filename length
#                       issues.  For host_truncate_target.
#
#  exeext               The suffix for executables on this system.
#
#  gnu_ld               Set to yes or no depending on whether the target
#                       system normally uses GNU ld.

out_file=
xmake_file=
tmake_file=
extra_headers=
extra_passes=
extra_parts=
extra_programs=
extra_objs=
extra_host_objs=
extra_gcc_objs=
c_target_objs=
cxx_target_objs=
xm_defines=
float_format=
# Set this to force installation and use of collect2.
use_collect2=
# Set this to override the default target model.
target_cpu_default=
# Set this to control how the header file directory is installed.
install_headers_dir=install-headers-tar
# Set this if directory names should be truncated to 14 characters.
truncate_target=
# Set this if gdb needs a dir command with `dirname $out_file`
gdb_needs_out_file_path=
# Set this if the build machine requires executables to have a
# file name suffix.
exeext=
# Set this to control which thread package will be used.
thread_file=
# Reinitialize these from the flag values every loop pass, since some
# configure entries modify them.
gas="$gas_flag"
gnu_ld="$gnu_ld_flag"
enable_threads=$enable_threads_flag

# Obsolete configurations.
case $machine in
   m88k-*-aout*     \
 | m88k-*-openbsd*  \
 | m88k-*-sysv4*    \
 | mips-sni-sysv4   \
 | mn10200-*-*      \
 | ns32k-*-netbsd*  \
 | ns32k-*-openbsd* \
 | romp-*-openbsd*  \
 )
    if test "x$enable_obsolete" != xyes; then
      echo "*** Configuration $machine is obsolete." >&2
      echo "*** Specify --enable-obsolete to build it anyway." >&2
      echo "*** Support will be REMOVED in the next major release of GCC," >&2
      echo "*** unless a maintainer comes forward." >&2
      exit 1
    fi;;
esac

# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
# updated in each machine entry.  Also set default extra_headers for some
# machines.
tm_p_file=
cpu_type=`echo $machine | sed 's/-.*$//'`
case $machine in
alpha*-*-*)
        cpu_type=alpha
        ;;
strongarm*-*-*)
        cpu_type=arm
        ;;
arm*-*-*)
        cpu_type=arm
        ;;
xscale-*-*)
        cpu_type=arm
        ;;
i[34567]86-*-*)
        cpu_type=i386
        extra_headers="mmintrin.h xmmintrin.h"
        ;;
x86_64-*-*)
        cpu_type=i386
        extra_headers="mmintrin.h xmmintrin.h"
        ;;
ia64-*-*)
        extra_headers=ia64intrin.h
        ;;
hppa*-*-* | parisc*-*-*)
        cpu_type=pa
        ;;
m680[012]0-*-*)
        cpu_type=m68k
        extra_headers=math-68881.h
        ;;
m68k-*-*)
        extra_headers=math-68881.h
        ;;
mips*-*-*)
        cpu_type=mips
        ;;
powerpc*-*-*)
        cpu_type=rs6000
        extra_headers="ppc-asm.h altivec.h"
        ;;
sparc*-*-*)
        cpu_type=sparc
        ;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
sh[123456789l]*-*-*)
        cpu_type=sh
        ;;
esac

tm_file=${cpu_type}/${cpu_type}.h
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
then
        tm_p_file=${cpu_type}/${cpu_type}-protos.h
fi
extra_modes=
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
then
        extra_modes=${cpu_type}/${cpu_type}-modes.def
fi

case $machine in
x86_64-*-*)
        tm_file="i386/biarch64.h ${tm_file}"
        ;;
esac

# On a.out targets, we need to use collect2.
case $machine in
*-*-*aout*)
        use_collect2=yes
        ;;
esac

# Common parts for GNU/Linux, GNU/Hurd, OpenBSD, NetBSD, and FreeBSD systems.
case $machine in
*-*-linux*)
        xm_defines=POSIX
        ;;
*-*-gnu*)
        # On the Hurd, the setup is just about the same on
        # each different CPU.  The specific machines that we
        # support are matched above and just set $cpu_type.
        xm_defines=POSIX
        tm_file="${cpu_type}/gnu.h"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        # GNU always uses ELF.
        elf=yes
        # GNU tools are the only tools.
        gnu_ld=yes
        gas=yes
        # These details are the same as for Linux.
        # But here we need a little extra magic.
        tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
        case $machine in
        alpha*)
                tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
                ;;
        i[34567]86-*-*)
                tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
                ;;
        esac
        ;;
*-*-openbsd*)
        tm_file=${cpu_type}/openbsd.h
        tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
        xm_defines=POSIX
        if test x$enable_threads = xyes; then
                thread_file='posix'
                tmake_file="${tmake_file} t-openbsd-thread"
        fi
        ;;
*-*-netbsd*)
        tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd"
        xm_defines=POSIX
        gas=yes
        gnu_ld=yes
        ;;
*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
        # This is the place-holder for the generic a.out configuration
        # of FreeBSD.  No actual configuration resides here since
        # there was only ever a bare-bones ix86 configuration for
        # a.out and it exists solely in the machine-specific section.
        # This place-holder must exist to avoid dropping into
        # the generic ELF configuration of FreeBSD (i.e. it must be
        # ordered before that section).
        ;;
*-*-freebsd*)
        # This is the generic ELF configuration of FreeBSD.  Later
        # machine-specific sections may refine and add to this
        # configuration.
        #
        # Due to tm_file entry ordering issues that vary between cpu
        # architectures, we only define fbsd_tm_file to allow the
        # machine-specific section to dictate the final order of all
        # entries of tm_file with the minor exception that components
        # of the tm_file set here will always be of the form:
        #
        # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
        #
        # The machine-specific section should not tamper with this
        # ordering but may order all other entries of tm_file as it
        # pleases around the provided core setting.
        gas=yes
        gnu_ld=yes
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
        case $machine in
        *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
        *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
        *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
        *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";;
        *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;;
        esac
        tmake_file="t-slibgcc-elf-ver t-freebsd"
        xmake_file=none
        xm_defines=POSIX
        case x${enable_threads} in
        xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";;
        x | xyes | xpthreads | xposix)
                thread_file='posix'
                tmake_file="${tmake_file} t-freebsd-thread"
                # Before 5.0, FreeBSD can't bind shared libraries to -lc
                # when "optionally" threaded via weak pthread_* checks.
                case $machine in
                *-*-freebsd[34] | *-*-freebsd[34].*)
                        tmake_file="${tmake_file} t-slibgcc-nolc-override";;
                esac
                ;;
        *) echo 'Unknown thread configuration for FreeBSD'; exit 1;;
        esac
        fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
        ;;
esac

case $machine in
# Support site-specific machine types.
*local*)
        rest=`echo $machine | sed -e "s/$cpu_type-//"`
        tm_file=${cpu_type}/$rest.h
        if test -f $srcdir/config/${cpu_type}/xm-$rest.h
        then xm_file=${cpu_type}/xm-$rest.h
        fi
        if test -f $srcdir/config/${cpu_type}/x-$rest
        then xmake_file=${cpu_type}/x-$rest
        fi
        if test -f $srcdir/config/${cpu_type}/t-$rest
        then tmake_file=${cpu_type}/t-$rest
        fi
        ;;
alpha*-*-unicosmk*)
        use_collect2=yes
        tm_file="${tm_file} alpha/unicosmk.h"

        # Don't include t-ieee for now because we don't support that yet
        # tmake_file="alpha/t-ieee"
        tmake_file="alpha/t-unicosmk"
        ;;
alpha-*-interix)
        tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"

        # GAS + IEEE_CONFORMANT+IEEE (no inexact);
        #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"

        # GAS + IEEE_CONFORMANT
        target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"

        xm_defines=POSIX
        xm_file="alpha/xm-alpha-interix.h"
        tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee"
        if test x$enable_threads = xyes ; then
                thread_file='posix'
        fi
        if test x$stabs = xyes ; then
                tm_file="${tm_file} dbxcoff.h"
        fi
        #prefix='$$INTERIX_ROOT'/usr/contrib
        #local_prefix='$$INTERIX_ROOT'/usr/contrib
        ;;
alpha*-*-linux*ecoff*)
        echo "Configuration $machine no longer supported" 1>&2
        exit 1
        ;;
alpha*-*-linux*libc1*)
        tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
        target_cpu_default="MASK_GAS"
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtfm alpha/t-ieee"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
alpha*-*-linux*)
        tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
        target_cpu_default="MASK_GAS"
        tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
alpha*-*-gnu*)
        target_cpu_default="MASK_GAS"
        tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
        ;;
alpha*-*-freebsd*)
        tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
        target_cpu_default="MASK_GAS"
        tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        ;;
alpha*-*-netbsd*)
        tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
        target_cpu_default="MASK_GAS"
        tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
        ;;

alpha*-*-openbsd*)
        tm_file="${cpu_type}/${cpu_type}.h ${tm_file}"
        # default x-alpha is only appropriate for dec-osf.
        target_cpu_default="MASK_GAS"
        tmake_file="alpha/t-alpha alpha/t-ieee"
        ;;

alpha*-dec-osf[45]*)
        xm_defines=POSIX
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        if test x$gas != xyes
        then
                extra_passes="mips-tfile mips-tdump"
        fi
        use_collect2=yes
        tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
        tm_file="${tm_file} alpha/osf.h"
        extra_headers=va_list.h
        case $machine in
          *-*-osf4*)
            # Some versions of OSF4 (specifically X4.0-9 296.7) have
            # a broken tar, so we use cpio instead.
            install_headers_dir=install-headers-cpio
            # Set target_cpu_default except on 4.0a.
            case $machine in
                *-*-osf4.0a) ;;
                *) target_cpu_default=MASK_SUPPORT_ARCH
            esac
            ;;
          *-*-osf5*)
            tm_file="${tm_file} alpha/osf5.h"
            target_cpu_default=MASK_SUPPORT_ARCH
            float_format=i128
            ;;
        esac
        ;;
alpha*-*-vxworks*)
        xm_defines=POSIX
        tm_file="${tm_file} dbx.h alpha/vxworks.h"
        tmake_file="alpha/t-alpha alpha/t-ieee"
        if [ x$gas != xyes ]
        then
                extra_passes="mips-tfile mips-tdump"
        fi
        use_collect2=yes
        thread_file='vxworks'
        ;;
alpha64-dec-*vms*)
        xm_defines=POSIX
        tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
        xm_file="alpha/xm-vms.h alpha/xm-vms64.h"
        tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
        xmake_file=alpha/x-vms
        exeext=.exe
        # This removes the cpu type and manufacturer components and
        #  replaces "." with "_" in the operating system version.
        case $host in *-*-*vms*)
                target_alias=`echo $host \
                  | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
                ;;
        esac
        install_headers_dir=install-headers-cp
        prefix=/gnu
        local_prefix=/gnu
        ;;
alpha*-dec-*vms*)
        xm_defines=POSIX
        tm_file="${tm_file} alpha/vms.h"
        xm_file=alpha/xm-vms.h
        tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
        xmake_file=alpha/x-vms
        exeext=.exe
        # This removes the cpu type and manufacturer components and
        #  replaces "." with "_" in the operating system version.
        case $host in *-*-*vms*)
                target_alias=`echo $host \
                  | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
                ;;
        esac
        install_headers_dir=install-headers-cp
        prefix=/gnu
        local_prefix=/gnu
        ;;
arc-*-elf*)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        extra_parts="crtinit.o crtfini.o"
        ;;
arm-*-coff* | armel-*-coff*)
        tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h"
        tmake_file=arm/t-arm-coff
        ;;
arm-*-vxworks*)
        tm_file="arm/semi.h arm/aout.h arm/coff.h arm/vxarm.h arm/arm.h"
        tmake_file=arm/t-arm-coff
        thread_file='vxworks'
        ;;
arm-semi-aout | armel-semi-aout)
        tm_file="arm/semi.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-semi
        ;;
arm-semi-aof | armel-semi-aof)
        tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
        tmake_file=arm/t-semi
        ;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
        tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
        tmake_file="${tmake_file} arm/t-strongarm-elf"
        ;;
arm*-*-netbsdelf*)
        echo "GCC does not yet support the ${machine} target"; exit 1
        ;;
arm*-*-netbsd*)
        tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
        tmake_file="t-netbsd arm/t-netbsd"
        use_collect2=yes
        ;;
arm*-*-linux*)                  # ARM GNU/Linux with ELF
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
        tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        gnu_ld=yes
        case x${enable_threads} in
        x | xyes | xpthreads | xposix)
                thread_file='posix'
                ;;
        esac
        ;;
arm*-*-uclinux*)                # ARM ucLinux
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
        tmake_file=arm/t-arm-elf
        ;;
arm*-*-aout)
        tm_file="arm/aout.h arm/arm.h"
        tmake_file=arm/t-arm-aout
        ;;
arm*-*-ecos-elf)
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
        tmake_file=arm/t-arm-elf
        ;;
arm*-*-rtems*)
        xm_defines=POSIX
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
        tmake_file="arm/t-arm-elf t-rtems"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
arm*-*-elf)
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-arm-elf
        ;;
arm*-*-conix*)
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/conix-elf.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-arm-elf
        ;;
arm*-*-oabi)
        tm_file="arm/unknown-elf-oabi.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-arm-elf
        ;;
arm-*-pe*)
        tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h arm/pe.h"
        tmake_file=arm/t-pe
        extra_objs="pe.o"
        ;;
avr-*-*)
        ;;
c4x-*-rtems*)
        xm_defines=POSIX
        tmake_file="c4x/t-c4x t-rtems"
        tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        c_target_objs="c4x-c.o"
        cxx_target_objs="c4x-c.o"
        ;;
c4x-*)
        float_format=c4x
        tmake_file=c4x/t-c4x
        c_target_objs="c4x-c.o"
        cxx_target_objs="c4x-c.o"
        ;;
cris-*-aout)
        tm_file="dbxelf.h ${tm_file} cris/aout.h"
        gas=yes
        tmake_file="cris/t-cris cris/t-aout"
        ;;
cris-*-elf | cris-*-none)
        tm_file="dbxelf.h elfos.h ${tm_file}"
        tmake_file="cris/t-cris cris/t-elfmulti"
        gas=yes
        ;;
cris-*-linux*)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
        tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        case x${enable_threads} in
        x | xyes | xpthreads | xposix)
                thread_file=posix
                ;;
        esac
        gas=yes
        ;;
d30v-*)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        float_format=i64
        ;;
dsp16xx-*)
        ;;
fr30-*-elf)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        tmake_file=fr30/t-fr30
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        ;;
h8300-*-rtems*)
        xm_defines=POSIX
        tmake_file="h8300/t-h8300 t-rtems"
        tm_file="h8300/h8300.h h8300/rtems.h rtems.h"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        float_format=i32
        ;;
h8300-*-elf*)
        tmake_file="h8300/t-h8300 h8300/t-elf"
        tm_file="h8300/h8300.h h8300/elf.h"
        float_format=i32
        ;;
h8300-*-*)
        float_format=i32
        ;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
        target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
        tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
                 pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
        tmake_file=pa/t-linux64
        gas=yes gnu_ld=yes
        ;;
hppa*-*-linux* | parisc*-*-linux*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
                 pa/pa32-regs.h pa/pa32-linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
hppa*-*-openbsd*)
        target_cpu_default="MASK_PA_11"
        tmake_file=pa/t-bsd
        ;;
hppa1.1-*-pro*)
        target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
        tmake_file="pa/t-bsd pa/t-pro"
        xmake_file="pa/x-ada"
        ;;
hppa1.1-*-osf*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
        tmake_file="pa/t-bsd pa/t-pa"
        xmake_file="pa/x-ada"
        use_collect2=yes
        ;;
hppa1.1-*-rtems*)
        xm_defines=POSIX
        target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
        tmake_file="pa/t-bsd pa/t-pro"
        xmake_file="pa/x-ada"
        ;;
hppa1.0-*-osf*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
        tmake_file="pa/t-bsd pa/t-pa"
        xmake_file="pa/x-ada"
        use_collect2=yes
        ;;
hppa1.1-*-bsd*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
        target_cpu_default="MASK_PA_11"
        tmake_file="pa/t-bsd pa/t-pa"
        xmake_file="pa/x-ada"
        use_collect2=yes
        ;;
hppa1.0-*-bsd*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
        tmake_file="pa/t-bsd pa/t-pa"
        xmake_file="pa/x-ada"
        use_collect2=yes
        ;;
hppa1.0-*-hpux7*)
        tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hpux8.0[0-2]*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        if test x$gas != xyes
        then
                tm_file="pa/pa-oldas.h ${tm_file}"
        fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hpux8.0[0-2]*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        if test x$gas != xyes
        then
                tm_file="pa/pa-oldas.h ${tm_file}"
        fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hpux8*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hpux8*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
        float_format=i128
        xm_defines=POSIX
        tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
        xmake_file="pa/x-ada"
        if test x$enable_threads = x; then
            enable_threads=$have_pthread_h
        fi
        case x${enable_threads} in
        xyes | xdce)
                tmake_file="${tmake_file} pa/t-dce-thr"
                ;;
        esac
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hpux10*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
        float_format=i128
        xm_defines=POSIX
        tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
        xmake_file="pa/x-ada"
        if test x$enable_threads = x; then
            enable_threads=$have_pthread_h
        fi
        case x${enable_threads} in
        xyes | xdce)
                tmake_file="${tmake_file} pa/t-dce-thr"
                ;;
        esac
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa*64*-*-hpux11*)
        xm_defines=POSIX
        tm_file="pa/pa64-start.h ${tm_file} pa/pa64-regs.h pa/long_double.h pa/elf.h pa/pa-hpux.h pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
        float_format=i128
        tmake_file="pa/t-pa64 pa/t-pa-hpux"
        xmake_file="pa/x-ada"
        target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)"

#       if [ x$enable_threads = x ]; then
#           enable_threads=$have_pthread_h
#       fi
#       if [ x$enable_threads = xyes ]; then
#               thread_file='dce'
#               tmake_file="${tmake_file} pa/t-dce-thr"
#       fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
        float_format=i128
        xm_defines=POSIX
        tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
        xmake_file="pa/x-ada"
#       if test x$enable_threads = x; then
#           enable_threads=$have_pthread_h
#       fi
#       if test x$enable_threads = xyes; then
#               thread_file='dce'
#               tmake_file="${tmake_file} pa/t-dce-thr"
#       fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hpux11*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
        float_format=i128
        xm_defines=POSIX
        tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
        xmake_file="pa/x-ada"
#       if test x$enable_threads = x; then
#           enable_threads=$have_pthread_h
#       fi
#       if test x$enable_threads = xyes; then
#               thread_file='dce'
#               tmake_file="${tmake_file} pa/t-dce-thr"
#       fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hpux* | hppa2*-*-hpux*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hpux*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.1-*-hiux* | hppa2*-*-hiux*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa1.0-*-hiux*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
        xm_defines=POSIX
        tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
hppa*-*-lites*)
        tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h"
        target_cpu_default="MASK_PA_11"
        tmake_file="pa/t-bsd pa/t-pa"
        xmake_file="pa/x-ada"
        use_collect2=yes
        ;;
hppa*-*-mpeix*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h"
        tmake_file=pa/t-mpeix
        echo "You must use gas. Assuming it is already installed."
        gas=yes
        install_headers_dir=install-headers-tar
        use_collect2=yes
        ;;
i370-*-opened*)                  # IBM 360/370/390 Architecture
        xm_defines='POSIX FATAL_EXIT_CODE=12'
        tm_file=i370/oe.h
        tmake_file="i370/t-oe i370/t-i370"
        c_target_objs="i370-c.o"
        cxx_target_objs="i370-c.o"
        ;;
i370-*-mvs*)
        xm_defines='POSIX FATAL_EXIT_CODE=12'
        tm_file=i370/mvs.h
        tmake_file="i370/t-i370"
        c_target_objs="i370-c.o"
        cxx_target_objs="i370-c.o"
        ;;
i370-*-linux*)
        tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h ${tm_file}"
        tmake_file="t-slibgcc-elf-ver t-linux"
        # broken_install=yes
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        # extra_parts="crtbegin.o crtend.o"
        gnu_ld=yes
        gas=yes
        elf=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
i[34567]86-*-elf*)
        xm_defines=POSIX
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
        tmake_file="i386/t-i386elf t-svr4"
        ;;
i[34567]86-ncr-sysv4*)          # NCR 3000 - ix86 running system V.4
        xm_defines="POSIX SMALL_ARG_MAX"
        if test x$stabs = xyes -a x$gas = xyes
        then
                tm_file=i386/sysv4gdb.h
        else
                tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h"
        fi
        extra_parts="crtbegin.o crtend.o"
        tmake_file=i386/t-crtpic
        ;;
i[34567]86-*-netware)           # Intel 80386's running netware
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
        tmake_file=i386/t-netware
        ;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
        if test x$gas = xyes
        then
                tm_file="${tm_file} usegas.h"
        fi
        xm_defines="POSIX SMALL_ARG_MAX"
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
        install_headers_dir=install-headers-cpio
        ;;
i[34567]86-sequent-sysv*)       # would otherwise be caught by i?86-*-sysv*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
i[34567]86-wrs-vxworks*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h i386/vxi386.h"
        thread_file='vxworks'
        ;;
i[34567]86-*-aout*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
        ;;
i[34567]86-*-beoself* | i[34567]86-*-beos*)
        xm_defines=POSIX
        tmake_file='i386/t-beos i386/t-crtpic'
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
        extra_parts='crtbegin.o crtend.o'
        ;;
i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
        tmake_file=t-freebsd
        ;;
i[34567]86-*-freebsd*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
        ;;
x86_64-*-freebsd*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
        ;;
i[34567]86-*-netbsdelf*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
        float_format=i386
        ;;
i[34567]86-*-netbsd*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
        tmake_file=t-netbsd
        use_collect2=yes
        ;;
x86_64-*-netbsd*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
        float_format=i386
        ;;
i[34567]86-*-openbsd*)
        tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h ${tm_file}"
        # needed to unconfuse gdb
        tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
        # we need collect2 until our bug is fixed...
        use_collect2=yes
        ;;
i[34567]86-*-coff*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
        ;;
i[34567]86-*-linux*oldld*)      # would otherwise be caught by i?86-*-linux*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
i[34567]86-*-linux*aout*)       # Intel 80386's running GNU/Linux
                                # with a.out format
        tmake_file="t-linux-aout i386/t-crtstuff"
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
        gnu_ld=yes
        float_format=i386
        ;;
i[34567]86-*-linux*libc1)       # Intel 80386's running GNU/Linux
                                # with ELF format using the
                                # GNU/Linux C library 5
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        gnu_ld=yes
        float_format=i386
        if test x$enable_threads = xyes; then
                thread_file='single'
        fi
        ;;
i[34567]86-*-linux*)    # Intel 80386's running GNU/Linux
                        # with ELF format using glibc 2
                        # aka GNU/Linux C library 6
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gnu_ld=yes
        float_format=i386
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
x86_64-*-linux*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
                 i386/x86-64.h i386/linux64.h"
        tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff i386/t-linux64"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gnu_ld=yes
        float_format=i386
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
i[34567]86-*-gnu*)
        float_format=i386
        ;;
i[34567]86-go32-msdos | i[34567]86-*-go32*)
        echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
        exit 1
        ;;
i[34567]86-pc-msdosdjgpp*)
        xm_file=i386/xm-djgpp.h
        tm_file="dbxcoff.h ${tm_file} i386/djgpp.h"
        tmake_file=i386/t-djgpp
        gnu_ld=yes
        gas=yes
        exeext=.exe
        float_format=none
        case $host in *pc-msdosdjgpp*)
                target_alias=djgpp
                ;;
        esac
        ;;
i[34567]86-moss-msdos* | i[34567]86-*-moss*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h"
        tmake_file=t-libc-ok
        gnu_ld=yes
        gas=yes
        ;;
i[34567]86-*-lynxos*)
        if test x$gas = xyes
        then
                tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx.h i386/lynx.h"
        else
                tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
        fi
        ;;
i[34567]86-*-mach*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h"
#       tmake_file=t-libc-ok
        use_collect2=yes
        ;;
i[34567]86-go32-rtems* | i[34567]86-*-rtemscoff*)
        # would otherwise be caught by i?86-*-rtems*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
i[34567]86-*-rtems*)
        xm_defines=POSIX
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
        extra_parts="crtbegin.o crtend.o crti.o crtn.o"
        tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
        xm_defines=POSIX
        install_headers_dir=install-headers-cpio
        tm_file="${tm_file} i386/unix.h i386/att.h i386/sco5.h"
        if test x$gas = xyes
        then
                tm_file="usegas.h ${tm_file}"
                tmake_file=i386/t-sco5gas
        else
                tmake_file=i386/t-sco5
        fi
        extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
        ;;
i[34567]86-*-solaris2*)
        xm_defines="POSIX SMALL_ARG_MAX"
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sol2.h"
        if test x$gas = xyes; then
                tm_file="i386/sol2gas.h ${tm_file}"
        fi
        tmake_file="i386/t-sol2 t-svr4"
        if test x$gnu_ld = xyes; then
                tmake_file="$tmake_file t-slibgcc-elf-ver"
        else
                tmake_file="$tmake_file t-slibgcc-sld"
        fi
        extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
        if test x${enable_threads} = x; then
            enable_threads=$have_pthread_h
            if test x${enable_threads} = x; then
                enable_threads=$have_thread_h
            fi
        fi
        if test x${enable_threads} = xyes; then
            if test x${have_pthread_h} = xyes; then
                thread_file='posix'
            else
                thread_file='solaris'
            fi
        fi
        ;;
i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
       xm_defines=POSIX
       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
       if test x$stabs = xyes
       then
               tm_file="${tm_file} dbx.h"
       fi
       tmake_file="i386/t-crtpic t-svr4"
       extra_parts="crtbegin.o crtend.o"
       if test x$enable_threads = xyes; then
               thread_file='posix'
       fi
       ;;
i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
        xm_defines="POSIX SMALL_ARG_MAX"
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h"
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        tmake_file="i386/t-crtpic t-svr4"
        extra_parts="crtbegin.o crtend.o"
        ;;
i[34567]86-*-udk*)      # Intel x86 on SCO UW/OSR5 Dev Kit
        xm_defines=POSIX
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
        tmake_file="i386/t-crtpic i386/t-udk t-svr4"
        extra_parts="crtbegin.o crtend.o"
        install_headers_dir=install-headers-cpio
        ;;
i[34567]86-*-sysv*)             # Intel 80386's running system V
        xm_defines=POSIX
        if test x$gas = xyes
        then
                if test x$stabs = xyes
                then
                        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
                        tmake_file=i386/t-svr3dbx
                        extra_parts="svr3.ifile svr3z.ifile"
                else
                        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
                        extra_parts="crtbegin.o crtend.o"
                        tmake_file=i386/t-crtstuff
                fi
        else
                tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h"
                extra_parts="crtbegin.o crtend.o"
                tmake_file=i386/t-crtstuff
        fi
        tmake_file="$tmake_file i386/t-crtpic"
        ;;
i386-*-vsta)                    # Intel 80386's running VSTa kernel
        xm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/xm-vsta.h"
        tm_file="${tm_file} i386/vsta.h"
        ;;
i[34567]86-*-win32)
        xm_defines=POSIX
        xm_file=i386/xm-cygwin.h
        float_format=i386
        tmake_file=i386/t-cygwin
        tm_file="${tm_file} i386/win32.h"
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
        exeext=.exe
        ;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
        xm_defines=POSIX
        xm_file=i386/xm-cygwin.h
        float_format=i386
        tmake_file=i386/t-cygwin
        tm_file=i386/cygwin.h
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
        exeext=.exe
        ;;
i[34567]86-*-mingw32*)
        tm_file=i386/mingw32.h
        float_format=i386
        xm_defines=POSIX
        xm_file=i386/xm-mingw32.h
        tmake_file="i386/t-cygwin i386/t-mingw32"
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
        exeext=.exe
        case $machine in
                *mingw32crt*)
                        tm_file="${tm_file} i386/crtdll.h"
                        ;;
                *minwg32msv* | *mingw32*)
                        ;;
        esac
        ;;
i[34567]86-*-uwin*)
        tm_file="i386/cygwin.h i386/uwin.h"
        tmake_file="i386/t-cygwin i386/t-uwin"
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
        exeext=.exe
        ;;
i[34567]86-*-interix3*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
        xm_file="i386/xm-i386-interix.h"
        xm_defines=POSIX
        tmake_file="t-interix i386/t-interix"
        extra_objs=interix.o
        xmake_file="x-interix"
        if test x$enable_threads = xyes ; then
                thread_file='posix'
        fi
        if test x$stabs = xyes ; then
                tm_file="${tm_file} dbxcoff.h"
        fi
        ;;
i[34567]86-*-interix*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
        xm_file="i386/xm-i386-interix.h"
        xm_defines=POSIX
        tmake_file="t-interix i386/t-interix"
        extra_objs=interix.o
        if test x$enable_threads = xyes ; then
                thread_file='posix'
        fi
        if test x$stabs = xyes ; then
                tm_file="${tm_file} dbxcoff.h"
        fi
        ;;
i960-wrs-vxworks5 | i960-wrs-vxworks5.0*)
        tm_file="${tm_file} i960/vx960.h"
        tmake_file=i960/t-vxworks960
        use_collect2=yes
        thread_file='vxworks'
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
i960-wrs-vxworks5* | i960-wrs-vxworks)
        tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/vx960-coff.h"
        tmake_file=i960/t-vxworks960
        use_collect2=yes
        thread_file='vxworks'
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
i960-wrs-vxworks*)
        tm_file="${tm_file} i960/vx960.h"
        tmake_file=i960/t-vxworks960
        use_collect2=yes
        thread_file='vxworks'
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
i960-*-coff*)
        tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
        tmake_file=i960/t-960bare
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
i960-*-rtems)
        xm_defines=POSIX
        tmake_file="i960/t-960bare t-rtems"
        tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
i960-*-*)                       # Default i960 environment.
        use_collect2=yes
        tmake_file=i960/t-960bare
        c_target_objs="i960-c.o"
        cxx_target_objs="i960-c.o"
        ;;
ia64*-*-aix*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/aix.h"
        tmake_file="ia64/t-ia64 ia64/t-aix"
        target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
        ;;
ia64*-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
        tmake_file="ia64/t-ia64"
        target_cpu_default="0"
        if test x$gas = xyes
        then
                target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
        fi
        if test x$gnu_ld = xyes
        then
                target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
        fi
        float_format=i386
        ;;
ia64*-*-freebsd*)
        tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
        target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
        tmake_file="${tmake_file} ia64/t-ia64"
        float_format=i386
        ;;
ia64*-*-linux*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
        target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        float_format=i386
        ;;
ia64*-*-hpux*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
        tmake_file="ia64/t-ia64 ia64/t-hpux"
        target_cpu_default="MASK_GNU_AS"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        float_format=i386
        ;;
m32r-*-elf*)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        extra_parts="crtinit.o crtfini.o"
        ;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
        tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
        tm_p_file="m68hc11/m68hc11-protos.h"
        md_file="m68hc11/m68hc11.md"
        out_file="m68hc11/m68hc11.c"
        tmake_file="m68hc11/t-m68hc11-gas"
        ;;
m68hc12-*-*|m6812-*-*)
        tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
        tm_p_file="m68hc11/m68hc11-protos.h"
        md_file="m68hc11/m68hc11.md"
        out_file="m68hc11/m68hc11.c"
        tmake_file="m68hc11/t-m68hc11-gas"
        ;;
m68000-hp-bsd*)                 # HP 9000/200 running BSD
        tm_file=m68k/hp2bsd.h
        use_collect2=yes
        ;;
m68000-hp-hpux*)                # HP 9000 series 300
        xm_defines=POSIX
        if test x$gas = xyes
        then
                tm_file=m68k/hp310g.h
        else
                tm_file=m68k/hp310.h
        fi
        tmake_file=m68k/t-hp320
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
m68000-sun-sunos3*)
        tm_file=m68k/sun2.h
        use_collect2=yes
        ;;
m68000-sun-sunos4*)
        tm_file=m68k/sun2o4.h
        use_collect2=yes
        ;;
m68000-att-sysv*)
        xm_defines=POSIX
        if test x$gas = xyes
        then
                tm_file=m68k/3b1g.h
        else
                tm_file=m68k/3b1.h
        fi
        use_collect2=yes
        ;;
m68k-atari-sysv4*)              # Atari variant of V.4.
        tm_file=m68k/atari.h
        xm_defines=POSIX
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
        float_format=m68k
        ;;
m68k-apollo-sysv* | m68k-bull-sysv*)
        # can otherwise be caught by m68k-*-sysv4*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
m68k-motorola-sysv*)
        tm_file=m68k/mot3300.h
        xm_defines=POSIX
        if test x$gas = xyes
        then
                if test x$gnu_ld = xyes
                then
                        tmake_file=m68k/t-mot3300-gald
                else
                        tmake_file=m68k/t-mot3300-gas
                        use_collect2=yes
                fi
        else
                if test x$gnu_ld = xyes
                then
                        tmake_file=m68k/t-mot3300-gld
                else
                        tmake_file=m68k/t-mot3300
                        use_collect2=yes
                fi
        fi
        gdb_needs_out_file_path=yes
        extra_parts="crt0.o mcrt0.o"
        float_format=m68k
        ;;
m68k-ncr-sysv*)                 # NCR Tower 32 SVR3
        tm_file=m68k/tower-as.h
        xm_defines=POSIX
        extra_parts="crtbegin.o crtend.o"
        ;;
m68k-plexus-sysv*)
        tm_file=m68k/plexus.h
        xm_defines=POSIX
        use_collect2=yes
        ;;
m68k-tti-*)
        tm_file=m68k/pbb.h
        xm_defines=POSIX
        ;;
m68k-crds-unos*)
        xm_defines=POSIX
        tm_file=m68k/crds.h
        use_collect2=yes
        ;;
m68k-cbm-sysv4*)                # Commodore variant of V.4.
        tm_file=m68k/amix.h
        xm_defines=POSIX
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
        float_format=m68k
        ;;
m68k-ccur-rtu)
        tm_file=m68k/ccur-GAS.h
        use_collect2=yes
        float_format=m68k
        ;;
m68k-hp-bsd4.4*)                # HP 9000/3xx running 4.4bsd
        tm_file=m68k/hp3bsd44.h
        use_collect2=yes
        float_format=m68k
        ;;
m68k-hp-bsd*)                   # HP 9000/3xx running Berkeley Unix
        tm_file=m68k/hp3bsd.h
        use_collect2=yes
        float_format=m68k
        ;;
m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
        xm_defines=POSIX
        if test x$gas = xyes
        then
                xmake_file=m68k/x-hp320g
                tm_file=m68k/hp320g.h
        else
                xmake_file=m68k/x-hp320
                tm_file=m68k/hpux7.h
        fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        float_format=m68k
        ;;
m68k-hp-hpux*)  # HP 9000 series 300
        xm_defines=POSIX
        if test x$gas = xyes
        then
                xmake_file=m68k/x-hp320g
                tm_file=m68k/hp320g.h
        else
                xmake_file=m68k/x-hp320
                tm_file=m68k/hp320.h
        fi
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        float_format=m68k
        ;;
m68k-sun-mach*)
        tm_file=m68k/sun3mach.h
        use_collect2=yes
        float_format=m68k
        ;;
m68k-sun-sunos3*)
        if test x$with_fp = xno
        then
                tm_file=m68k/sun3n3.h
        else
                tm_file=m68k/sun3o3.h
                float_format=m68k
        fi
        use_collect2=yes
        ;;
m68k-sun-sunos*)                        # For SunOS 4 (the default).
        if test x$with_fp = xno
        then
                tm_file=m68k/sun3n.h
        else
                tm_file=m68k/sun3.h
                float_format=m68k
        fi
        use_collect2=yes
        ;;
m68k-wrs-vxworks*)
        tm_file=m68k/vxm68k.h
        tmake_file=m68k/t-vxworks68
        thread_file='vxworks'
        float_format=m68k
        ;;
m68k-*-aout*)
        tmake_file=m68k/t-m68kbare
        tm_file="m68k/m68k-aout.h libgloss.h"
        float_format=m68k
        ;;
m68k-*-coff*)
        tmake_file=m68k/t-m68kbare
        tm_file="m68k/m68k-coff.h dbx.h"
        float_format=m68k
        ;;
m68020-*-elf* | m68k-*-elf*)
        tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
        xm_defines=POSIX
        tmake_file=m68k/t-m68kelf
        extra_parts="crtbegin.o crtend.o"
        ;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
        tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
        case $machine in
        m68010*)
                target_cpu_default="0"
                ;;
        *)
                target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
                ;;
        esac
        float_format=m68k
        ;;
m68k*-*-netbsd*)
        tm_file=m68k/netbsd.h
        tmake_file=t-netbsd
        float_format=m68k
        use_collect2=yes
        ;;
m68k*-*-openbsd*)
        # needed to unconfuse gdb
        tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
        float_format=m68k
        # we need collect2 until our bug is fixed...
        use_collect2=yes
        ;;
m68k-*-sysv4*)                  # Motorola m68k's running system V.4
        tm_file=m68k/m68kv4.h
        xm_defines=POSIX
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
        float_format=m68k
        ;;
m68k-*-linux*aout*)             # Motorola m68k's running GNU/Linux
                                # with a.out format
        tm_file=m68k/linux-aout.h
        tmake_file="t-linux-aout m68k/t-linux-aout"
        float_format=m68k
        gnu_ld=yes
        ;;
m68k-*-linux*libc1)             # Motorola m68k's running GNU/Linux
                                # with ELF format using the
                                # GNU/Linux C library 5
        tm_file=m68k/linux.h
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 m68k/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        float_format=m68k
        gnu_ld=yes
        ;;
m68k-*-linux*)          # Motorola m68k's running GNU/Linux
                                # with ELF format using glibc 2
                                # aka the GNU/Linux C library 6.
        tm_file=m68k/linux.h
        tmake_file="t-slibgcc-elf-ver t-linux m68k/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        float_format=m68k
        gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
m68k-*-psos*)
        tmake_file=m68k/t-m68kbare
        tm_file=m68k/m68k-psos.h
        float_format=m68k
        ;;
m68k-*-rtemscoff*)      # would otherwise be caught by m68k-*-rtems*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
m68k-*-rtems*)
        xm_defines=POSIX
        tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
        tm_file="m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
        float_format=m68k
        extra_parts="crtbegin.o crtend.o"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
m88k-*-aout*)
        xm_defines=POSIX
        tm_file=m88k/m88k-aout.h
        ;;
m88k-*-openbsd*)
        tmake_file="${tmake_file} m88k/t-luna-gas"
        tm_file="m88k/aout-dbx.h aoutos.h m88k/m88k.h openbsd.h ${tm_file}"
        ;;
m88k-*-sysv4*)
        xm_defines=POSIX
        tm_file="dbxelf.h elfos.h svr4.h m88k/sysv4.h"
        extra_parts="crtbegin.o crtend.o"
        tmake_file=m88k/t-sysv4
        ;;
mcore-*-elf)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
        tmake_file=mcore/t-mcore
        ;;
mcore-*-pe*)
        tm_file=mcore/mcore-pe.h
        tmake_file=mcore/t-mcore-pe
        ;;
mips-sgi-irix6*)                # SGI System V.4., IRIX 6
        if test "x$gnu_ld" = xyes
        then
                tm_file="mips/iris6.h mips/iris6gld.h"
        else
                tm_file=mips/iris6.h
        fi
        tmake_file="mips/t-iris mips/t-iris6"
        xm_defines=POSIX
#       if test x$enable_threads = xyes; then
#               thread_file='irix'
#       fi
        ;;
mips-wrs-vxworks)
        tm_file="mips/elf.h mips/vxworks.h"
        tmake_file=mips/t-ecoff
        gas=yes
        gnu_ld=yes
        extra_parts="crtbegin.o crtend.o"
        thread_file='vxworks'
        ;;
mips-sgi-irix5cross64)          # Irix5 host, Irix 6 target, cross64
        tm_file="mips/iris6.h mips/cross64.h"
        xm_defines=POSIX
        xm_file=mips/xm-iris5.h
        tmake_file="mips/t-iris mips/t-cross64"
        # See comment in mips/iris[56].h files.
        use_collect2=yes
#       if test x$enable_threads = xyes; then
#               thread_file='irix'
#       fi
        ;;
mips-sni-sysv4)
        if test x$gas = xyes
        then
                if test x$stabs = xyes
                then
                        tm_file=mips/iris5gdb.h
                else
                        tm_file="mips/sni-svr4.h mips/sni-gas.h"
                fi
        else
                tm_file=mips/sni-svr4.h
        fi
        xm_defines=POSIX
        if test x$gnu_ld != xyes
        then
                use_collect2=yes
        fi
        ;;
mips-sgi-irix5*)                # SGI System V.4., IRIX 5
        if test x$gas = xyes
        then
                tm_file="mips/iris5.h mips/iris5gas.h"
                if test x$stabs = xyes
                then
                        tm_file="${tm_file} dbx.h"
                fi
        else
                tm_file=mips/iris5.h
        fi
        tmake_file=mips/t-iris
        xm_defines=POSIX
        xm_file=mips/xm-iris5.h
        # mips-tfile doesn't work yet
        # See comment in mips/iris5.h file.
        use_collect2=yes
#       if test x$enable_threads = xyes; then
#               thread_file='irix'
#       fi
        ;;
mips-sgi-*)     # would otherwise be caught by mips-*-elf*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
mips*-*-netbsd*)                        # NetBSD/mips, either endian.
        tm_file="elfos.h mips/netbsd.h"
        tmake_file="${tmake_file} mips/t-netbsd"
        ;;
mips*-*-linux*)                         # Linux MIPS, either endian.
        tm_file="dbxelf.h elfos.h svr4.h linux.h mips/linux.h"
        case $machine in
        mipsisa32*-*)
                tm_file="$tm_file mips/isa32-linux.h"
                target_cpu_default="MASK_SOFT_FLOAT"
                ;;
        esac
        tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gnu_ld=yes
        gas=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
mips*el-*-openbsd*)     # mips little endian
        target_cpu_default="MASK_GAS|MASK_ABICALLS"
        ;;
mips*-*-openbsd*)               # mips big endian
        target_cpu_default="MASK_GAS|MASK_ABICALLS"
        tm_file="mips/openbsd-be.h ${tm_file}"
        ;;
mips-*-ecoff* | mipsel-*-ecoff*)
        tm_file="gofast.h mips/ecoff.h"
        if test x$stabs = xyes; then
                tm_file="${tm_file} dbx.h"
        fi
        tmake_file=mips/t-ecoff
        ;;
mipsisa32-*-elf* | mipsisa32el-*-elf*)
        tm_file="mips/isa3264.h mips/abi64.h"
        tmake_file=mips/t-isa3264
        target_cpu_default="MASK_SOFT_FLOAT"
        ;;
mips-*-elf* | mipsel-*-elf*)
        tm_file="mips/elf.h"
        tmake_file=mips/t-elf
        ;;
mips64-*-elf* | mips64el-*-elf*)
        tm_file="mips/elf64.h"
        tmake_file=mips/t-elf
        ;;
mips64orion-*-elf* | mips64orionel-*-elf*)
        tm_file="mips/elforion.h mips/elf64.h"
        tmake_file=mips/t-elf
        ;;
mips64orion-*-rtems*)
        xm_defines=POSIX
        tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h rtems.h"
        tmake_file="mips/t-elf t-rtems"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
mips*-*-rtems*)
        xm_defines=POSIX
        tm_file="mips/elf.h mips/rtems.h rtems.h"
        tmake_file="mips/t-elf t-rtems"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
mipstx39-*-elf* | mipstx39el-*-elf*)
        tm_file="mips/r3900.h mips/elf.h mips/abi64.h"
        tmake_file=mips/t-r3900
        ;;
mmix-knuth-mmixware)
        ;;
mn10200-*-*)
        float_format=i32
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        use_collect2=no
        ;;
mn10300-*-*)
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        use_collect2=no
        ;;
ns32k-*-netbsdelf*)
        echo "GCC does not yet support the ${machine} target"; exit 1
        ;;
ns32k-*-netbsd*)
        tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
        # On NetBSD, the headers are already okay, except for math.h.
        tmake_file=t-netbsd
        use_collect2=yes
        ;;
pdp11-*-bsd)
        tm_file="${tm_file} pdp11/2bsd.h"
        ;;
pdp11-*-*)
        ;;
avr-*-*)
        ;;
ns32k-*-openbsd*)
        # Nothing special
        ;;
romp-*-openbsd*)
        # Nothing special
        ;;
powerpc-*-openbsd*)
        tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
        extra_headers=
        ;;
powerpc64-*-linux*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux64.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-linux rs6000/t-linux64"
        ;;
powerpc64-*-gnu*)
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-rs6000 t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
        ;;
powerpc-*-beos*)
        tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
        xm_defines=POSIX
        tmake_file=rs6000/t-beos
        extra_headers=
        ;;
powerpc-*-darwin*)
        tm_file="${tm_file} darwin.h rs6000/darwin.h"
        tm_p_file="${tm_p_file} darwin-protos.h"
        tmake_file=rs6000/t-darwin
        extra_objs="darwin.o"
        config_gtfiles="${config_gtfiles} \$(srcdir)/config/darwin.c"
        c_target_objs="darwin-c.o"
        cxx_target_objs="darwin-c.o"
        # Darwin linker does collect2 functionality
        use_collect2=no
        extra_headers=altivec.h
        ;;
powerpc*-*-freebsd*)
        tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
        xm_file=rs6000/xm-sysv4.h
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
        ;;
powerpc-*-sysv*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
        xm_defines=POSIX
        tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
        ;;
powerpc-*-netbsd*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
        tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
        ;;
powerpc-*-chorusos*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
        tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
        case x${enable_threads} in
          xyes | xpthreads | xposix)
                thread_file='posix'
                ;;
        esac
        ;;
powerpc-*-eabiaix*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpc-*-eabisimaltivec*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
        tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm"
        ;;
powerpc-*-eabisim*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpc-*-elf*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpc-*-eabialtivec*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
        tmake_file="rs6000/t-ppcendian rs6000/t-ppccomm"
        ;;
powerpc-*-eabi*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpc-*-rtems*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
        tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
powerpc-*-linux*libc1)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
powerpc-*-linux-gnualtivec*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
powerpc-*-linux*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
powerpc-*-gnu-gnualtivec*)
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
powerpc-*-gnu*)
        tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
powerpc-wrs-vxworks*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/vxppc.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        thread_file='vxworks'
        ;;
powerpc-wrs-windiss*)
        xm_defines=POSIX
        tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        thread_file=""
        ;;
powerpcle-wrs-vxworks*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/vxppc.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        thread_file='vxworks'
        ;;
powerpcle-*-sysv*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
        xm_defines=POSIX
        tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
        ;;
powerpcle-*-elf*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpcle-*-eabisim*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
powerpcle-*-eabi*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
        tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
rs6000-ibm-aix3.[01]*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/aix31.h rs6000/xcoff.h"
        float_format=none
        use_collect2=yes
        ;;
rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/aix3newas.h rs6000/xcoff.h"
        tmake_file=rs6000/t-newas
        float_format=none
        use_collect2=yes
        extra_headers=
        ;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
        tmake_file=rs6000/t-newas
        float_format=none
        use_collect2=yes
        extra_headers=
        ;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
        tmake_file=rs6000/t-aix43
        float_format=none
        use_collect2=yes
        thread_file='aix'
        extra_headers=
        ;;
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
        tmake_file=rs6000/t-aix43
        float_format=none
        use_collect2=yes
        thread_file='aix'
        extra_headers=
        ;;
rs6000-ibm-aix*)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
        float_format=none
        use_collect2=yes
        ;;
rs6000-bull-bosx)
        xm_defines=POSIX
        tm_file="${tm_file} rs6000/aix.h rs6000/xcoff.h"
        float_format=none
        use_collect2=yes
        ;;
rs6000-*-mach*)
        tm_file="${tm_file} rs6000/mach.h"
        xm_defines=POSIX
        use_collect2=yes
        ;;
rs6000-*-lynxos*)
        tm_file="lynx.h rs6000/lynx.h"
        tmake_file=rs6000/t-rs6000
        use_collect2=yes
        ;;
s390-*-linux*)
        tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux s390/t-linux"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
s390x-*-linux*)
        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
        tm_p_file=s390/s390-protos.h
        md_file=s390/s390.md
        extra_modes=s390/s390-modes.def
        out_file=s390/s390.c
        tmake_file="t-slibgcc-elf-ver t-linux s390/t-linux s390/t-linux64"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
sh-*-elf* | shl*-*-elf* | sh64*-*-elf*)
        tmake_file="sh/t-sh sh/t-elf"
        case $machine in
        shl* | sh64l*)
                tm_file="sh/little.h ${tm_file}"
                tmake_file="${tmake_file} sh/t-le"
                ;;
        esac
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h"
        float_format=sh
        case $machine in
        sh64*)
                tmake_file="${tmake_file} sh/t-sh64"
                tm_file="${tm_file} sh/sh64.h"
                extra_headers="shmedia.h ushmedia.h sshmedia.h"
                # Not strictly necessary to check this, but a good idea anyway.
                if test $machine = $target; then
                        target_requires_64bit_host_wide_int=yes
                fi
                ;;
        esac
        ;;
sh-*-rtemself*)
        xm_defines=POSIX
        tmake_file="sh/t-sh sh/t-elf t-rtems"
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/rtemself.h rtems.h"
        float_format=sh
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
sh-*-rtems*)
        xm_defines=POSIX
        tmake_file="sh/t-sh t-rtems"
        tm_file="${tm_file} sh/coff.h sh/rtems.h rtems.h"
        float_format=sh
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
sh-*-linux*)
        tm_file="sh/little.h ${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
        tmake_file="sh/t-sh sh/t-elf sh/t-le sh/t-linux"
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        float_format=sh
        ;;
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
  sh64-*-netbsd* | sh64l*-*-netbsd*)
        tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
        tmake_file="${tmake_file} sh/t-sh sh/t-elf"
        case $machine in
        sh*l*-*)
                tm_file="sh/little.h ${tm_file}"
                tmake_file="${tmake_file} sh/t-le"
                ;;
        *)
                tmake_file="${tmake_file} sh/t-be"
                ;;
        esac
        case $machine in
        sh5*-*)
                # SHmedia, 32-bit ABI
                target_cpu_default="SH5_BIT|SH4_BIT|SH3E_BIT"
                tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5"
                ;;
        sh64*-*)
                # SHmedia, 64-bit ABI
                target_cpu_default="SH5_BIT|SH4_BIT"
                tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64"
                ;;
        *)
                # SH3, software floating point
                target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT"
                tmake_file="${tmake_file} sh/t-netbsd"
                ;;
        esac
        float_format=sh
        ;;
sh-*-*)
        tm_file="${tm_file} sh/coff.h"
        float_format=sh
        ;;
sparc-tti-*)
        tm_file="${tm_file} sparc/pbd.h"
        xm_defines=POSIX
        ;;
sparc64-wrs-vxworks*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h sparc/biarch64.h gofast.h sparc/vxsparc64.h"
        tmake_file="sparc/t-vxsparc64 sparc/t-crtfm"
        use_collect2=yes
        ;;
sparc-wrs-vxworks* | sparclite-wrs-vxworks*)
        tm_file="${tm_file} aoutos.h sparc/aout.h gofast.h sparc/vxsparc.h"
        tmake_file=sparc/t-vxsparc
        use_collect2=yes
        thread_file='vxworks'
        ;;
sparc-*-aout*)
        tmake_file=sparc/t-sparcbare
        tm_file="sparc/sparc.h aoutos.h sparc/aout.h libgloss.h"
        ;;
sparc-*-netbsdelf*)
        tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
        ;;
sparc-*-netbsd*)
        tm_file="${tm_file} sparc/aout.h netbsd.h netbsd-aout.h sparc/netbsd.h"
        tmake_file=t-netbsd
        use_collect2=yes
        ;;
sparc-*-openbsd*)
        tm_file="sparc/sparc.h ${tm_file}"
        # needed to unconfuse gdb
        tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
        # we need collect2 until our bug is fixed...
        use_collect2=yes
        ;;
sparc64-*-openbsd*)
        tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
        xm_file=sparc/xm-sp64.h
        gas=yes gnu_ld=yes
        with_cpu=ultrasparc
        float_format=i128
        ;;
sparc-*-bsd*)
        tm_file="${tm_file} sparc/bsd.h"
        ;;
sparc-*-chorusos*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h chorus.h"
        tmake_file="sparc/t-chorus-elf sparc/t-crtfm"
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        float_format=i64
        case x${enable_threads} in
          xyes | xpthreads | xposix)
                thread_file='posix'
                ;;
        esac
        ;;
sparc-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h"
        tmake_file="sparc/t-elf sparc/t-crtfm"
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        #float_format=i128
        float_format=i64
        ;;
sparc-*-linux*aout*)            # Sparc's running GNU/Linux, a.out
        tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
        gnu_ld=yes
        ;;
sparc-*-linux*libc1*)   # Sparc's running GNU/Linux, libc5
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        gnu_ld=yes
        float_format=sparc
        ;;
sparc-*-linux*)         # Sparc's running GNU/Linux, libc6
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        float_format=sparc
        ;;
sparc-*-lynxos*)
        if test x$gas = xyes
        then
                tm_file="${tm_file} lynx.h sparc/aout.h sparc/lynx.h"
        else
                tm_file="${tm_file} lynx-ng.h sparc/aout.h sparc/lynx-ng.h"
        fi
        tmake_file=sparc/t-sunos41
        ;;
sparc-*-rtemsaout*)     # would otherwise be caught by sparc-*-rtems*
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
sparc-*-rtems*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
        tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        #float_format=i128
        float_format=i64
        if test x$enable_threads = xyes; then
          thread_file='rtems'
        fi
        ;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
        tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
        if test x$gnu_ld = xyes; then
                tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
        fi
        if test x$gas = xyes; then
                tm_file="${tm_file} sparc/sol2-gas-bi.h"
        fi
        xm_defines=POSIX
        tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
        if test x$gnu_ld = xyes; then
                tmake_file="$tmake_file t-slibgcc-elf-ver"
        else
                tmake_file="$tmake_file t-slibgcc-sld"
        fi
        extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
        float_format=i128
        if test x${enable_threads} = x ; then
            enable_threads=$have_pthread_h
            if test x${enable_threads} = x ; then
                enable_threads=$have_thread_h
            fi
        fi
        if test x${enable_threads} = xyes ; then
            if test x${have_pthread_h} = xyes ; then
                thread_file='posix'
            else
                thread_file='solaris'
            fi
        fi
        ;;
sparc-hal-solaris2*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/hal.h"
        tmake_file="sparc/t-halos sparc/t-sol2 sparc/t-crtfm"
        if test x$gnu_ld = xyes; then
                tm_file="${tm_file} sparc/sol2-gld.h"
                tmake_file="$tmake_file t-slibgcc-elf-ver"
        else
                tmake_file="$tmake_file t-slibgcc-sld"
        fi
        extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
        float_format=i128
        thread_file='solaris'
        ;;
sparc-*-solaris2*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h"
        if test x$gnu_ld = xyes; then
                tm_file="${tm_file} sparc/sol2-gld.h"
        fi
        tmake_file="sparc/t-sol2 sparc/t-crtfm"
        if test x$gnu_ld = xyes; then
                tmake_file="$tmake_file t-slibgcc-elf-ver"
        else
                tmake_file="$tmake_file t-slibgcc-sld"
        fi
        case $machine in
        *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
                if test x$gnu_ld = xno; then
                        tm_file="${tm_file} sparc/sol26-sld.h"
                fi
                ;;
        *-*-solaris2.[789])
                tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
                if test x$gnu_ld = xyes; then
                        tm_file="${tm_file} sparc/sol2-gld-bi.h"
                fi
                if test x$gas = xyes; then
                        tm_file="${tm_file} sparc/sol2-gas-bi.h"
                fi
                tmake_file="$tmake_file sparc/t-sol2-64"
                ;;
        esac
        xm_defines=POSIX
        extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
        float_format=i128
        if test x${enable_threads} = x; then
            enable_threads=$have_pthread_h
            if test x${enable_threads} = x; then
                enable_threads=$have_thread_h
            fi
        fi
        if test x${enable_threads} = xyes; then
            if test x${have_pthread_h} = xyes; then
                thread_file='posix'
            else
                thread_file='solaris'
            fi
        fi
        ;;
sparc-*-sunos4.0*)
        tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
        use_collect2=yes
        ;;
sparc-*-sunos4*)
        tm_file="${tm_file} sparc/aout.h sparc/sunos4.h"
        tmake_file=sparc/t-sunos41
        use_collect2=yes
        if test x$gas = xyes; then
                tm_file="${tm_file} sparc/sun4gas.h"
        fi
        ;;
sparc-*-sunos3*)
        tm_file="${tm_file} sparc/aout.h sparc/sun4o3.h"
        use_collect2=yes
        ;;
sparc-*-sysv4*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h"
        xm_defines=POSIX
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
        ;;
sparc-*-vxsim*)
        xm_defines=POSIX
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/vxsim.h"
        tmake_file=sparc/t-vxsparc
        ;;
sparclet-*-aout*)
        tm_file="${tm_file} aoutos.h sparc/aout.h sparc/splet.h libgloss.h"
        tmake_file=sparc/t-splet
        ;;
sparclite-*-coff*)
        tm_file="${tm_file} gofast.h sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
        tmake_file=sparc/t-sparclite
        ;;
sparclite-*-aout*)
        tm_file="${tm_file} gofast.h sparc/aout.h sparc/lite.h aoutos.h libgloss.h"
        tmake_file=sparc/t-sparclite
        ;;
sparclite-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
        tmake_file="sparc/t-sparclite sparc/t-crtfm"
        extra_parts="crtbegin.o crtend.o"
        ;;
sparc86x-*-aout*)
        tm_file="${tm_file} gofast.h sparc/aout.h sparc/sp86x-aout.h aoutos.h libgloss.h"
        tmake_file=sparc/t-sp86x
        ;;
sparc86x-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
        tmake_file="sparc/t-sp86x sparc/t-crtfm"
        extra_parts="crtbegin.o crtend.o"
        ;;
sparc64-*-aout*)
        tm_file="sparc/sparc.h aoutos.h sparc/aout.h sparc/sp64-aout.h"
        ;;
sparc64-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h"
        tmake_file="${tmake_file} sparc/t-crtfm"
        extra_parts="crtbegin.o crtend.o"
        ;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
        tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
        tmake_file="${tmake_file} sparc/t-crtfm"
        xmake_file=none
        case "x$with_cpu" in
                xultrasparc) ;;
                x) with_cpu=ultrasparc ;;
                *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
        esac
        ;;
sparc64-*-linux*)               # 64-bit Sparc's running GNU/Linux
        tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
        tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        float_format=sparc
        ;;
sparc64-*-netbsd*)
        tmake_file="${tmake_file} sparc/t-netbsd64"
        tm_file="sparc/biarch64.h ${tm_file}"
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
        float_format=sparc
        ;;
strongarm-*-elf*)
        tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-strongarm-elf
        out_file=arm/arm.c
        md_file=arm/arm.md
        extra_modes=arm/arm-modes.def
        ;;
strongarm-*-coff*)
        tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h"
        tmake_file=arm/t-strongarm-coff
        out_file=arm/arm.c
        md_file=arm/arm.md
        extra_modes=arm/arm-modes.def
        ;;
strongarm-*-pe)
        tm_file="arm/semi.h arm/aout.h arm/coff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
        tmake_file=arm/t-strongarm-pe
        out_file=arm/arm.c
        md_file=arm/arm.md
        extra_modes=arm/arm-modes.def
        extra_objs=pe.o
        ;;
thumb*-*-*)
        { echo "config.gcc: error:
*** The Thumb targets have been deprecated.  The equivalent
*** ARM based toolchain can now generate Thumb instructions
*** when the -mthumb switch is given to the compiler." 1>&2; exit 1; }
        ;;
v850-*-rtems*)
        xm_defines=POSIX
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file} v850/v850.h v850/rtems.h rtems.h"
        tmake_file="v850/t-v850 t-rtems"
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        use_collect2=no
        c_target_objs="v850-c.o"
        cxx_target_objs="v850-c.o"
        ;;
v850-*-*)
        target_cpu_default="TARGET_CPU_generic"
        tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
        tmake_file=v850/t-v850
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
        fi
        use_collect2=no
        c_target_objs="v850-c.o"
        cxx_target_objs="v850-c.o"
        ;;
vax-*-bsd*)                     # VAXen running BSD
        tm_file="${tm_file} vax/bsd.h"
        use_collect2=yes
        float_format=vax
        ;;
vax-*-sysv*)                    # VAXen running system V
        tm_file="${tm_file} vax/vaxv.h"
        xm_defines=POSIX
        float_format=vax
        ;;
vax-*-netbsdelf*)
        echo "GCC does not yet support the ${machine} target"; exit 1
        ;;
vax-*-netbsd*)
        tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
        tmake_file=t-netbsd
        float_format=vax
        use_collect2=yes
        ;;
vax-*-openbsd*)
        tm_file="vax/vax.h vax/openbsd1.h openbsd.h ${tm_file}"
        float_format=vax
        use_collect2=yes
        ;;
vax-*-ultrix*)                  # VAXen running ultrix
        tm_file="${tm_file} vax/ultrix.h"
        float_format=vax
        ;;
vax-*-vms*)                     # VAXen running VMS
        xm_file=vax/xm-vms.h
        tm_file=vax/vms.h
        float_format=vax
        ;;
vax-*-*)                        # VAX default entry
        float_format=vax
        ;;
xscale-*-elf)
        tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
        tmake_file=arm/t-xscale-elf
        out_file=arm/arm.c
        md_file=arm/arm.md
        extra_modes=arm/arm-modes.def
        ;;
xscale-*-coff)
        tm_file="arm/semi.h arm/aout.h arm/coff.h arm/xscale-coff.h arm/arm.h"
        tmake_file=arm/t-xscale-coff
        out_file=arm/arm.c
        md_file=arm/arm.md
        extra_modes=arm/arm-modes.def
        ;;
xstormy16-*-elf)
        # For historical reasons, the target files omit the 'x'.
        tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
        tm_p_file=stormy16/stormy16-protos.h
        md_file=stormy16/stormy16.md
        out_file=stormy16/stormy16.c
        tmake_file="stormy16/t-stormy16"
        extra_parts="crtbegin.o crtend.o"
        ;;
xtensa-*-elf*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
        with_newlib=yes
        tmake_file=xtensa/t-xtensa
        extra_parts="crtbegin.o crtend.o"
        fixincludes=Makefile.in # newlib headers should be OK
        ;;
xtensa-*-linux*)
        tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
        tmake_file="t-linux xtensa/t-xtensa"
        extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        ;;
*)
        echo "*** Configuration $machine not supported" 1>&2
        exit 1
        ;;
esac

case $machine in
*-*-sysv*)
        install_headers_dir=install-headers-cpio
        ;;
esac

# Distinguish i[34567]86
# Also, do not run mips-tfile on MIPS if using gas.
# Process --with-cpu= for PowerPC/rs6000
target_cpu_default2=
case $machine in
i486-*-*)
        target_cpu_default2=TARGET_CPU_DEFAULT_i486
        ;;
i586-*-*)
        case $target_alias in
                k6_2-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_k6_2
                        ;;
                k6_3-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_k6_3
                        ;;
                k6-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_k6
                        ;;
                pentium_mmx-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx
                        ;;
                *)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentium
                        ;;
        esac
        ;;
i686-*-* | i786-*-*)
        case $target_alias in
                athlon_xp-*|athlon_mp-*|athlon_4-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
                        ;;
                athlon_tbird-*|athlon-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_athlon
                        ;;
                pentium2-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentium2
                        ;;
                pentium3-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentium3
                        ;;
                pentium4-*)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentium4
                        ;;
                *)
                        target_cpu_default2=TARGET_CPU_DEFAULT_pentiumpro
                        ;;
        esac
        ;;
x86_64-*-*)
        # We should have hammer chip here, but it does not exist yet and
        # thus it is not supported.  Athlon_SSE is probably equivalent feature
        # wise to hammer from our point of view except for 64bit mode.
        target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
        ;;
alpha*-*-*)
        case $machine in
                alphaev6[78]*)
                        target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
                        ;;
                alphaev6*)
                        target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
                        ;;
                alphapca56*)
                        target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
                        ;;
                alphaev56*)
                        target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
                        ;;
                alphaev5*)
                        target_cpu_default2="MASK_CPU_EV5"
                        ;;
        esac

        if test x$gas = xyes
        then
                if test "$target_cpu_default2" = ""
                then
                        target_cpu_default2="MASK_GAS"
                else
                        target_cpu_default2="${target_cpu_default2}|MASK_GAS"
                fi
        fi
        ;;
arm*-*-*)
        case "x$with_cpu" in
                x)
                        # The most generic
                        target_cpu_default2="TARGET_CPU_generic"
                        ;;

                # Distinguish cores, and major variants
                # arm7m doesn't exist, but D & I don't affect code
                xarm[236789] | xarm250 | xarm[67][01]0 \
                | xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \
                | xarm7100 | xarm7500 | xarm7500fe | xarm810 \
                | xxscale \
                | xstrongarm | xstrongarm110 | xstrongarm1100)
                        target_cpu_default2="TARGET_CPU_$with_cpu"
                        ;;

                xyes | xno)
                        echo "--with-cpu must be passed a value" 1>&2
                        exit 1
                        ;;

                *)
                        if test x$pass2done = xyes
                        then
                                echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
                                exit 1
                        fi
                        ;;
        esac
        ;;

hppa*-*-* | parisc*-*-*)
        if test x$gas = xyes
        then
                target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
        fi
        case $machine in
                hppa1.0* | parisc1.0*)
                        tm_file="pa/pa-700.h ${tm_file}"
                        ;;
                hppa1.1* | parisc1.1*)
                        tm_file="pa/pa-7100.h ${tm_file}"
                        ;;
        esac
        ;;
mips*-*-*)
        case $machine in
        mips*-*-ecoff* | mips*-*-elf*)
                if test x$gas = xyes
                then
                        if test x$gnu_ld = xyes
                        then
                                target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
                        else
                                target_cpu_default2="MASK_GAS"
                        fi
                fi
                ;;
        mips*-*-*)
                if test x$gas = xyes
                then
                        target_cpu_default2="MASK_GAS"
                fi
                ;;
        esac
        case $machine in
                mips*el-*-*)
                        tm_file="mips/little.h ${tm_file}"
                        ;;
        esac
        ;;
powerpc*-*-* | rs6000-*-*)
        if test x$enable_altivec = xyes
        then
                tm_file="$tm_file rs6000/altivec-defs.h"
        fi
        case "x$with_cpu" in
                x)
                        ;;

                xcommon | xpower | xpower2 | xpower3 | xpowerpc | xpowerpc64 \
                  | xrios | xrios1 | xrios2 | xrsc | xrsc1 | xrs64a \
                  | x601 | x602 | x603 | x603e | x604 | x604e | x620 | x630 \
                  | x740 | x750 | x7400 | x7450 | x505)
                        target_cpu_default2="\\\"$with_cpu\\\""
                        ;;

                x401 | x403 | x405 | xec603e | x801 | x821 | x823 | x860)
                        target_cpu_default2="\\\"$with_cpu\\\""
                        ;;

                xyes | xno)
                        echo "--with-cpu must be passed a value" 1>&2
                        exit 1
                        ;;

                *)
                        if test x$pass2done = xyes
                        then
                                echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
                                exit 1
                        fi
                        ;;
        esac
        case $machine in
          *-*-darwin*)
            ;;
          *)
            c_target_objs="rs6000-c.o"
            cxx_target_objs="rs6000-c.o"
            tmake_file="${tmake_file} rs6000/t-rs6000-c-rule"
            ;;
        esac
        ;;
sparc*-*-*)
        case ".$with_cpu" in
                .)
                        target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
                        ;;
                .supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9)
                        target_cpu_default2="TARGET_CPU_$with_cpu"
                        ;;
                *)
                        if test x$pass2done = xyes
                        then
                                echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
                                exit 1
                        fi
                        ;;
        esac
        ;;
esac

if test "$target_cpu_default2" != ""
then
        if test "$target_cpu_default" != ""
        then
                target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
        else
                target_cpu_default=$target_cpu_default2
        fi
fi

# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
if test x$pass1done = x
then
        if test x$xm_file != x
        then build_xm_file=$xm_file
        fi
        build_xm_defines=$xm_defines
        build_install_headers_dir=$install_headers_dir
        build_exeext=$exeext
        pass1done=yes
else
        if test x$pass2done = x
        then
                if test x$xm_file != x
                then host_xm_file=$xm_file
                fi
                host_xm_defines=$xm_defines
                host_xmake_file="$xmake_file"
                host_truncate_target=$truncate_target
                host_extra_gcc_objs=$extra_gcc_objs
                host_extra_objs=$extra_host_objs
                host_exeext=$exeext
                pass2done=yes
        fi
fi