1 /* Convert RTL to assembler code and output it, for GNU compiler.
2 Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it under
8 the terms of the GNU General Public License as published by the Free
9 Software Foundation; either version 2, or (at your option) any later
12 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13 WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING. If not, write to the Free
19 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
22 /* This is the final pass of the compiler.
23 It looks at the rtl code for a function and outputs assembler code.
25 Call `final_start_function' to output the assembler code for function entry,
26 `final' to output assembler code for some RTL code,
27 `final_end_function' to output assembler code for function exit.
28 If a function is compiled in several pieces, each piece is
29 output separately with `final'.
31 Some optimizations are also done at this level.
32 Move instructions that were made unnecessary by good register allocation
33 are detected and omitted from the output. (Though most of these
34 are removed by the last jump pass.)
36 Instructions to set the condition codes are omitted when it can be
37 seen that the condition codes already had the desired values.
39 In some cases it is sufficient if the inherited condition codes
40 have related values, but this may require the following insn
41 (the one that tests the condition codes) to be modified.
43 The code for the function prologue and epilogue are generated
44 directly in assembler by the target functions function_prologue and
45 function_epilogue. Those instructions never exist as rtl. */
49 #include "coretypes.h"
56 #include "insn-config.h"
57 #include "insn-attr.h"
59 #include "conditions.h"
62 #include "hard-reg-set.h"
69 #include "basic-block.h"
73 #include "cfglayout.h"
75 #ifdef XCOFF_DEBUGGING_INFO
76 #include "xcoffout.h" /* Needed for external data
77 declarations for e.g. AIX 4.x. */
80 #if defined (DWARF2_UNWIND_INFO) || defined (DWARF2_DEBUGGING_INFO)
81 #include "dwarf2out.h"
84 #ifdef DBX_DEBUGGING_INFO
88 /* If we aren't using cc0, CC_STATUS_INIT shouldn't exist. So define a
89 null default for it to save conditionalization later. */
90 #ifndef CC_STATUS_INIT
91 #define CC_STATUS_INIT
94 /* How to start an assembler comment. */
95 #ifndef ASM_COMMENT_START
96 #define ASM_COMMENT_START ";#"
99 /* Is the given character a logical line separator for the assembler? */
100 #ifndef IS_ASM_LOGICAL_LINE_SEPARATOR
101 #define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == ';')
104 #ifndef JUMP_TABLES_IN_TEXT_SECTION
105 #define JUMP_TABLES_IN_TEXT_SECTION 0
108 #if defined(READONLY_DATA_SECTION) || defined(READONLY_DATA_SECTION_ASM_OP)
109 #define HAVE_READONLY_DATA_SECTION 1
111 #define HAVE_READONLY_DATA_SECTION 0
114 /* Last insn processed by final_scan_insn. */
115 static rtx debug_insn
;
116 rtx current_output_insn
;
118 /* Line number of last NOTE. */
119 static int last_linenum
;
121 /* Highest line number in current block. */
122 static int high_block_linenum
;
124 /* Likewise for function. */
125 static int high_function_linenum
;
127 /* Filename of last NOTE. */
128 static const char *last_filename
;
130 extern int length_unit_log
; /* This is defined in insn-attrtab.c. */
132 /* Nonzero while outputting an `asm' with operands.
133 This means that inconsistencies are the user's fault, so don't abort.
134 The precise value is the insn being output, to pass to error_for_asm. */
135 rtx this_is_asm_operands
;
137 /* Number of operands of this insn, for an `asm' with operands. */
138 static unsigned int insn_noperands
;
140 /* Compare optimization flag. */
142 static rtx last_ignored_compare
= 0;
144 /* Assign a unique number to each insn that is output.
145 This can be used to generate unique local labels. */
147 static int insn_counter
= 0;
150 /* This variable contains machine-dependent flags (defined in tm.h)
151 set and examined by output routines
152 that describe how to interpret the condition codes properly. */
156 /* During output of an insn, this contains a copy of cc_status
157 from before the insn. */
159 CC_STATUS cc_prev_status
;
162 /* Indexed by hardware reg number, is 1 if that register is ever
163 used in the current function.
165 In life_analysis, or in stupid_life_analysis, this is set
166 up to record the hard regs used explicitly. Reload adds
167 in the hard regs used for holding pseudo regs. Final uses
168 it to generate the code in the function prologue and epilogue
169 to save and restore registers as needed. */
171 char regs_ever_live
[FIRST_PSEUDO_REGISTER
];
173 /* Nonzero means current function must be given a frame pointer.
174 Set in stmt.c if anything is allocated on the stack there.
175 Set in reload1.c if anything is allocated on the stack there. */
177 int frame_pointer_needed
;
179 /* Number of unmatched NOTE_INSN_BLOCK_BEG notes we have seen. */
181 static int block_depth
;
183 /* Nonzero if have enabled APP processing of our assembler output. */
187 /* If we are outputting an insn sequence, this contains the sequence rtx.
192 #ifdef ASSEMBLER_DIALECT
194 /* Number of the assembler dialect to use, starting at 0. */
195 static int dialect_number
;
198 /* Indexed by line number, nonzero if there is a note for that line. */
200 static char *line_note_exists
;
202 #ifdef HAVE_conditional_execution
203 /* Nonnull if the insn currently being emitted was a COND_EXEC pattern. */
204 rtx current_insn_predicate
;
207 #ifdef HAVE_ATTR_length
208 static int asm_insn_count (rtx
);
210 static void profile_function (FILE *);
211 static void profile_after_prologue (FILE *);
212 static bool notice_source_line (rtx
);
213 static rtx
walk_alter_subreg (rtx
*);
214 static void output_asm_name (void);
215 static void output_alternate_entry_point (FILE *, rtx
);
216 static tree
get_mem_expr_from_op (rtx
, int *);
217 static void output_asm_operand_names (rtx
*, int *, int);
218 static void output_operand (rtx
, int);
219 #ifdef LEAF_REGISTERS
220 static void leaf_renumber_regs (rtx
);
223 static int alter_cond (rtx
);
225 #ifndef ADDR_VEC_ALIGN
226 static int final_addr_vec_align (rtx
);
228 #ifdef HAVE_ATTR_length
229 static int align_fuzz (rtx
, rtx
, int, unsigned);
232 /* Initialize data in final at the beginning of a compilation. */
235 init_final (const char *filename ATTRIBUTE_UNUSED
)
240 #ifdef ASSEMBLER_DIALECT
241 dialect_number
= ASSEMBLER_DIALECT
;
245 /* Default target function prologue and epilogue assembler output.
247 If not overridden for epilogue code, then the function body itself
248 contains return instructions wherever needed. */
250 default_function_pro_epilogue (FILE *file ATTRIBUTE_UNUSED
,
251 HOST_WIDE_INT size ATTRIBUTE_UNUSED
)
255 /* Default target hook that outputs nothing to a stream. */
257 no_asm_to_stream (FILE *file ATTRIBUTE_UNUSED
)
261 /* Enable APP processing of subsequent output.
262 Used before the output from an `asm' statement. */
269 fputs (ASM_APP_ON
, asm_out_file
);
274 /* Disable APP processing of subsequent output.
275 Called from varasm.c before most kinds of output. */
282 fputs (ASM_APP_OFF
, asm_out_file
);
287 /* Return the number of slots filled in the current
288 delayed branch sequence (we don't count the insn needing the
289 delay slot). Zero if not in a delayed branch sequence. */
293 dbr_sequence_length (void)
295 if (final_sequence
!= 0)
296 return XVECLEN (final_sequence
, 0) - 1;
302 /* The next two pages contain routines used to compute the length of an insn
303 and to shorten branches. */
305 /* Arrays for insn lengths, and addresses. The latter is referenced by
306 `insn_current_length'. */
308 static int *insn_lengths
;
310 varray_type insn_addresses_
;
312 /* Max uid for which the above arrays are valid. */
313 static int insn_lengths_max_uid
;
315 /* Address of insn being processed. Used by `insn_current_length'. */
316 int insn_current_address
;
318 /* Address of insn being processed in previous iteration. */
319 int insn_last_address
;
321 /* known invariant alignment of insn being processed. */
322 int insn_current_align
;
324 /* After shorten_branches, for any insn, uid_align[INSN_UID (insn)]
325 gives the next following alignment insn that increases the known
326 alignment, or NULL_RTX if there is no such insn.
327 For any alignment obtained this way, we can again index uid_align with
328 its uid to obtain the next following align that in turn increases the
329 alignment, till we reach NULL_RTX; the sequence obtained this way
330 for each insn we'll call the alignment chain of this insn in the following
333 struct label_alignment
339 static rtx
*uid_align
;
340 static int *uid_shuid
;
341 static struct label_alignment
*label_align
;
343 /* Indicate that branch shortening hasn't yet been done. */
346 init_insn_lengths (void)
357 insn_lengths_max_uid
= 0;
359 #ifdef HAVE_ATTR_length
360 INSN_ADDRESSES_FREE ();
369 /* Obtain the current length of an insn. If branch shortening has been done,
370 get its actual length. Otherwise, get its maximum length. */
373 get_attr_length (rtx insn ATTRIBUTE_UNUSED
)
375 #ifdef HAVE_ATTR_length
380 if (insn_lengths_max_uid
> INSN_UID (insn
))
381 return insn_lengths
[INSN_UID (insn
)];
383 switch (GET_CODE (insn
))
391 length
= insn_default_length (insn
);
395 body
= PATTERN (insn
);
396 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
398 /* Alignment is machine-dependent and should be handled by
402 length
= insn_default_length (insn
);
406 body
= PATTERN (insn
);
407 if (GET_CODE (body
) == USE
|| GET_CODE (body
) == CLOBBER
)
410 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
411 length
= asm_insn_count (body
) * insn_default_length (insn
);
412 else if (GET_CODE (body
) == SEQUENCE
)
413 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
414 length
+= get_attr_length (XVECEXP (body
, 0, i
));
416 length
= insn_default_length (insn
);
423 #ifdef ADJUST_INSN_LENGTH
424 ADJUST_INSN_LENGTH (insn
, length
);
427 #else /* not HAVE_ATTR_length */
429 #endif /* not HAVE_ATTR_length */
432 /* Code to handle alignment inside shorten_branches. */
434 /* Here is an explanation how the algorithm in align_fuzz can give
437 Call a sequence of instructions beginning with alignment point X
438 and continuing until the next alignment point `block X'. When `X'
439 is used in an expression, it means the alignment value of the
442 Call the distance between the start of the first insn of block X, and
443 the end of the last insn of block X `IX', for the `inner size of X'.
444 This is clearly the sum of the instruction lengths.
446 Likewise with the next alignment-delimited block following X, which we
449 Call the distance between the start of the first insn of block X, and
450 the start of the first insn of block Y `OX', for the `outer size of X'.
452 The estimated padding is then OX - IX.
454 OX can be safely estimated as
459 OX = round_up(IX, X) + Y - X
461 Clearly est(IX) >= real(IX), because that only depends on the
462 instruction lengths, and those being overestimated is a given.
464 Clearly round_up(foo, Z) >= round_up(bar, Z) if foo >= bar, so
465 we needn't worry about that when thinking about OX.
467 When X >= Y, the alignment provided by Y adds no uncertainty factor
468 for branch ranges starting before X, so we can just round what we have.
469 But when X < Y, we don't know anything about the, so to speak,
470 `middle bits', so we have to assume the worst when aligning up from an
471 address mod X to one mod Y, which is Y - X. */
474 #define LABEL_ALIGN(LABEL) align_labels_log
477 #ifndef LABEL_ALIGN_MAX_SKIP
478 #define LABEL_ALIGN_MAX_SKIP align_labels_max_skip
482 #define LOOP_ALIGN(LABEL) align_loops_log
485 #ifndef LOOP_ALIGN_MAX_SKIP
486 #define LOOP_ALIGN_MAX_SKIP align_loops_max_skip
489 #ifndef LABEL_ALIGN_AFTER_BARRIER
490 #define LABEL_ALIGN_AFTER_BARRIER(LABEL) 0
493 #ifndef LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
494 #define LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP 0
498 #define JUMP_ALIGN(LABEL) align_jumps_log
501 #ifndef JUMP_ALIGN_MAX_SKIP
502 #define JUMP_ALIGN_MAX_SKIP align_jumps_max_skip
505 #ifndef ADDR_VEC_ALIGN
507 final_addr_vec_align (rtx addr_vec
)
509 int align
= GET_MODE_SIZE (GET_MODE (PATTERN (addr_vec
)));
511 if (align
> BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
)
512 align
= BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
;
513 return exact_log2 (align
);
517 #define ADDR_VEC_ALIGN(ADDR_VEC) final_addr_vec_align (ADDR_VEC)
520 #ifndef INSN_LENGTH_ALIGNMENT
521 #define INSN_LENGTH_ALIGNMENT(INSN) length_unit_log
524 #define INSN_SHUID(INSN) (uid_shuid[INSN_UID (INSN)])
526 static int min_labelno
, max_labelno
;
528 #define LABEL_TO_ALIGNMENT(LABEL) \
529 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].alignment)
531 #define LABEL_TO_MAX_SKIP(LABEL) \
532 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].max_skip)
534 /* For the benefit of port specific code do this also as a function. */
537 label_to_alignment (rtx label
)
539 return LABEL_TO_ALIGNMENT (label
);
542 #ifdef HAVE_ATTR_length
543 /* The differences in addresses
544 between a branch and its target might grow or shrink depending on
545 the alignment the start insn of the range (the branch for a forward
546 branch or the label for a backward branch) starts out on; if these
547 differences are used naively, they can even oscillate infinitely.
548 We therefore want to compute a 'worst case' address difference that
549 is independent of the alignment the start insn of the range end
550 up on, and that is at least as large as the actual difference.
551 The function align_fuzz calculates the amount we have to add to the
552 naively computed difference, by traversing the part of the alignment
553 chain of the start insn of the range that is in front of the end insn
554 of the range, and considering for each alignment the maximum amount
555 that it might contribute to a size increase.
557 For casesi tables, we also want to know worst case minimum amounts of
558 address difference, in case a machine description wants to introduce
559 some common offset that is added to all offsets in a table.
560 For this purpose, align_fuzz with a growth argument of 0 computes the
561 appropriate adjustment. */
563 /* Compute the maximum delta by which the difference of the addresses of
564 START and END might grow / shrink due to a different address for start
565 which changes the size of alignment insns between START and END.
566 KNOWN_ALIGN_LOG is the alignment known for START.
567 GROWTH should be ~0 if the objective is to compute potential code size
568 increase, and 0 if the objective is to compute potential shrink.
569 The return value is undefined for any other value of GROWTH. */
572 align_fuzz (rtx start
, rtx end
, int known_align_log
, unsigned int growth
)
574 int uid
= INSN_UID (start
);
576 int known_align
= 1 << known_align_log
;
577 int end_shuid
= INSN_SHUID (end
);
580 for (align_label
= uid_align
[uid
]; align_label
; align_label
= uid_align
[uid
])
582 int align_addr
, new_align
;
584 uid
= INSN_UID (align_label
);
585 align_addr
= INSN_ADDRESSES (uid
) - insn_lengths
[uid
];
586 if (uid_shuid
[uid
] > end_shuid
)
588 known_align_log
= LABEL_TO_ALIGNMENT (align_label
);
589 new_align
= 1 << known_align_log
;
590 if (new_align
< known_align
)
592 fuzz
+= (-align_addr
^ growth
) & (new_align
- known_align
);
593 known_align
= new_align
;
598 /* Compute a worst-case reference address of a branch so that it
599 can be safely used in the presence of aligned labels. Since the
600 size of the branch itself is unknown, the size of the branch is
601 not included in the range. I.e. for a forward branch, the reference
602 address is the end address of the branch as known from the previous
603 branch shortening pass, minus a value to account for possible size
604 increase due to alignment. For a backward branch, it is the start
605 address of the branch as known from the current pass, plus a value
606 to account for possible size increase due to alignment.
607 NB.: Therefore, the maximum offset allowed for backward branches needs
608 to exclude the branch size. */
611 insn_current_reference_address (rtx branch
)
616 if (! INSN_ADDRESSES_SET_P ())
619 seq
= NEXT_INSN (PREV_INSN (branch
));
620 seq_uid
= INSN_UID (seq
);
621 if (GET_CODE (branch
) != JUMP_INSN
)
622 /* This can happen for example on the PA; the objective is to know the
623 offset to address something in front of the start of the function.
624 Thus, we can treat it like a backward branch.
625 We assume here that FUNCTION_BOUNDARY / BITS_PER_UNIT is larger than
626 any alignment we'd encounter, so we skip the call to align_fuzz. */
627 return insn_current_address
;
628 dest
= JUMP_LABEL (branch
);
630 /* BRANCH has no proper alignment chain set, so use SEQ.
631 BRANCH also has no INSN_SHUID. */
632 if (INSN_SHUID (seq
) < INSN_SHUID (dest
))
634 /* Forward branch. */
635 return (insn_last_address
+ insn_lengths
[seq_uid
]
636 - align_fuzz (seq
, dest
, length_unit_log
, ~0));
640 /* Backward branch. */
641 return (insn_current_address
642 + align_fuzz (dest
, seq
, length_unit_log
, ~0));
645 #endif /* HAVE_ATTR_length */
648 compute_alignments (void)
650 int log
, max_skip
, max_log
;
659 max_labelno
= max_label_num ();
660 min_labelno
= get_first_label_num ();
661 label_align
= xcalloc (max_labelno
- min_labelno
+ 1,
662 sizeof (struct label_alignment
));
664 /* If not optimizing or optimizing for size, don't assign any alignments. */
665 if (! optimize
|| optimize_size
)
670 rtx label
= bb
->head
;
671 int fallthru_frequency
= 0, branch_frequency
= 0, has_fallthru
= 0;
674 if (GET_CODE (label
) != CODE_LABEL
675 || probably_never_executed_bb_p (bb
))
677 max_log
= LABEL_ALIGN (label
);
678 max_skip
= LABEL_ALIGN_MAX_SKIP
;
680 for (e
= bb
->pred
; e
; e
= e
->pred_next
)
682 if (e
->flags
& EDGE_FALLTHRU
)
683 has_fallthru
= 1, fallthru_frequency
+= EDGE_FREQUENCY (e
);
685 branch_frequency
+= EDGE_FREQUENCY (e
);
688 /* There are two purposes to align block with no fallthru incoming edge:
689 1) to avoid fetch stalls when branch destination is near cache boundary
690 2) to improve cache efficiency in case the previous block is not executed
691 (so it does not need to be in the cache).
693 We to catch first case, we align frequently executed blocks.
694 To catch the second, we align blocks that are executed more frequently
695 than the predecessor and the predecessor is likely to not be executed
696 when function is called. */
699 && (branch_frequency
> BB_FREQ_MAX
/ 10
700 || (bb
->frequency
> bb
->prev_bb
->frequency
* 10
701 && (bb
->prev_bb
->frequency
702 <= ENTRY_BLOCK_PTR
->frequency
/ 2))))
704 log
= JUMP_ALIGN (label
);
708 max_skip
= JUMP_ALIGN_MAX_SKIP
;
711 /* In case block is frequent and reached mostly by non-fallthru edge,
712 align it. It is most likely a first block of loop. */
714 && maybe_hot_bb_p (bb
)
715 && branch_frequency
+ fallthru_frequency
> BB_FREQ_MAX
/ 10
716 && branch_frequency
> fallthru_frequency
* 2)
718 log
= LOOP_ALIGN (label
);
722 max_skip
= LOOP_ALIGN_MAX_SKIP
;
725 LABEL_TO_ALIGNMENT (label
) = max_log
;
726 LABEL_TO_MAX_SKIP (label
) = max_skip
;
730 /* Make a pass over all insns and compute their actual lengths by shortening
731 any branches of variable length if possible. */
733 /* Give a default value for the lowest address in a function. */
735 #ifndef FIRST_INSN_ADDRESS
736 #define FIRST_INSN_ADDRESS 0
739 /* shorten_branches might be called multiple times: for example, the SH
740 port splits out-of-range conditional branches in MACHINE_DEPENDENT_REORG.
741 In order to do this, it needs proper length information, which it obtains
742 by calling shorten_branches. This cannot be collapsed with
743 shorten_branches itself into a single pass unless we also want to integrate
744 reorg.c, since the branch splitting exposes new instructions with delay
748 shorten_branches (rtx first ATTRIBUTE_UNUSED
)
755 #ifdef HAVE_ATTR_length
756 #define MAX_CODE_ALIGN 16
758 int something_changed
= 1;
759 char *varying_length
;
762 rtx align_tab
[MAX_CODE_ALIGN
];
766 /* Compute maximum UID and allocate label_align / uid_shuid. */
767 max_uid
= get_max_uid ();
769 uid_shuid
= xmalloc (max_uid
* sizeof *uid_shuid
);
771 if (max_labelno
!= max_label_num ())
773 int old
= max_labelno
;
777 max_labelno
= max_label_num ();
779 n_labels
= max_labelno
- min_labelno
+ 1;
780 n_old_labels
= old
- min_labelno
+ 1;
782 label_align
= xrealloc (label_align
,
783 n_labels
* sizeof (struct label_alignment
));
785 /* Range of labels grows monotonically in the function. Abort here
786 means that the initialization of array got lost. */
787 if (n_old_labels
> n_labels
)
790 memset (label_align
+ n_old_labels
, 0,
791 (n_labels
- n_old_labels
) * sizeof (struct label_alignment
));
794 /* Initialize label_align and set up uid_shuid to be strictly
795 monotonically rising with insn order. */
796 /* We use max_log here to keep track of the maximum alignment we want to
797 impose on the next CODE_LABEL (or the current one if we are processing
798 the CODE_LABEL itself). */
803 for (insn
= get_insns (), i
= 1; insn
; insn
= NEXT_INSN (insn
))
807 INSN_SHUID (insn
) = i
++;
810 /* reorg might make the first insn of a loop being run once only,
811 and delete the label in front of it. Then we want to apply
812 the loop alignment to the new label created by reorg, which
813 is separated by the former loop start insn from the
814 NOTE_INSN_LOOP_BEG. */
816 else if (GET_CODE (insn
) == CODE_LABEL
)
820 /* Merge in alignments computed by compute_alignments. */
821 log
= LABEL_TO_ALIGNMENT (insn
);
825 max_skip
= LABEL_TO_MAX_SKIP (insn
);
828 log
= LABEL_ALIGN (insn
);
832 max_skip
= LABEL_ALIGN_MAX_SKIP
;
834 next
= NEXT_INSN (insn
);
835 /* ADDR_VECs only take room if read-only data goes into the text
837 if (JUMP_TABLES_IN_TEXT_SECTION
|| !HAVE_READONLY_DATA_SECTION
)
838 if (next
&& GET_CODE (next
) == JUMP_INSN
)
840 rtx nextbody
= PATTERN (next
);
841 if (GET_CODE (nextbody
) == ADDR_VEC
842 || GET_CODE (nextbody
) == ADDR_DIFF_VEC
)
844 log
= ADDR_VEC_ALIGN (next
);
848 max_skip
= LABEL_ALIGN_MAX_SKIP
;
852 LABEL_TO_ALIGNMENT (insn
) = max_log
;
853 LABEL_TO_MAX_SKIP (insn
) = max_skip
;
857 else if (GET_CODE (insn
) == BARRIER
)
861 for (label
= insn
; label
&& ! INSN_P (label
);
862 label
= NEXT_INSN (label
))
863 if (GET_CODE (label
) == CODE_LABEL
)
865 log
= LABEL_ALIGN_AFTER_BARRIER (insn
);
869 max_skip
= LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
;
875 #ifdef HAVE_ATTR_length
877 /* Allocate the rest of the arrays. */
878 insn_lengths
= xmalloc (max_uid
* sizeof (*insn_lengths
));
879 insn_lengths_max_uid
= max_uid
;
880 /* Syntax errors can lead to labels being outside of the main insn stream.
881 Initialize insn_addresses, so that we get reproducible results. */
882 INSN_ADDRESSES_ALLOC (max_uid
);
884 varying_length
= xcalloc (max_uid
, sizeof (char));
886 /* Initialize uid_align. We scan instructions
887 from end to start, and keep in align_tab[n] the last seen insn
888 that does an alignment of at least n+1, i.e. the successor
889 in the alignment chain for an insn that does / has a known
891 uid_align
= xcalloc (max_uid
, sizeof *uid_align
);
893 for (i
= MAX_CODE_ALIGN
; --i
>= 0;)
894 align_tab
[i
] = NULL_RTX
;
895 seq
= get_last_insn ();
896 for (; seq
; seq
= PREV_INSN (seq
))
898 int uid
= INSN_UID (seq
);
900 log
= (GET_CODE (seq
) == CODE_LABEL
? LABEL_TO_ALIGNMENT (seq
) : 0);
901 uid_align
[uid
] = align_tab
[0];
904 /* Found an alignment label. */
905 uid_align
[uid
] = align_tab
[log
];
906 for (i
= log
- 1; i
>= 0; i
--)
910 #ifdef CASE_VECTOR_SHORTEN_MODE
913 /* Look for ADDR_DIFF_VECs, and initialize their minimum and maximum
916 int min_shuid
= INSN_SHUID (get_insns ()) - 1;
917 int max_shuid
= INSN_SHUID (get_last_insn ()) + 1;
920 for (insn
= first
; insn
!= 0; insn
= NEXT_INSN (insn
))
922 rtx min_lab
= NULL_RTX
, max_lab
= NULL_RTX
, pat
;
923 int len
, i
, min
, max
, insn_shuid
;
925 addr_diff_vec_flags flags
;
927 if (GET_CODE (insn
) != JUMP_INSN
928 || GET_CODE (PATTERN (insn
)) != ADDR_DIFF_VEC
)
930 pat
= PATTERN (insn
);
931 len
= XVECLEN (pat
, 1);
934 min_align
= MAX_CODE_ALIGN
;
935 for (min
= max_shuid
, max
= min_shuid
, i
= len
- 1; i
>= 0; i
--)
937 rtx lab
= XEXP (XVECEXP (pat
, 1, i
), 0);
938 int shuid
= INSN_SHUID (lab
);
949 if (min_align
> LABEL_TO_ALIGNMENT (lab
))
950 min_align
= LABEL_TO_ALIGNMENT (lab
);
952 XEXP (pat
, 2) = gen_rtx_LABEL_REF (VOIDmode
, min_lab
);
953 XEXP (pat
, 3) = gen_rtx_LABEL_REF (VOIDmode
, max_lab
);
954 insn_shuid
= INSN_SHUID (insn
);
955 rel
= INSN_SHUID (XEXP (XEXP (pat
, 0), 0));
956 flags
.min_align
= min_align
;
957 flags
.base_after_vec
= rel
> insn_shuid
;
958 flags
.min_after_vec
= min
> insn_shuid
;
959 flags
.max_after_vec
= max
> insn_shuid
;
960 flags
.min_after_base
= min
> rel
;
961 flags
.max_after_base
= max
> rel
;
962 ADDR_DIFF_VEC_FLAGS (pat
) = flags
;
965 #endif /* CASE_VECTOR_SHORTEN_MODE */
967 /* Compute initial lengths, addresses, and varying flags for each insn. */
968 for (insn_current_address
= FIRST_INSN_ADDRESS
, insn
= first
;
970 insn_current_address
+= insn_lengths
[uid
], insn
= NEXT_INSN (insn
))
972 uid
= INSN_UID (insn
);
974 insn_lengths
[uid
] = 0;
976 if (GET_CODE (insn
) == CODE_LABEL
)
978 int log
= LABEL_TO_ALIGNMENT (insn
);
981 int align
= 1 << log
;
982 int new_address
= (insn_current_address
+ align
- 1) & -align
;
983 insn_lengths
[uid
] = new_address
- insn_current_address
;
987 INSN_ADDRESSES (uid
) = insn_current_address
+ insn_lengths
[uid
];
989 if (GET_CODE (insn
) == NOTE
|| GET_CODE (insn
) == BARRIER
990 || GET_CODE (insn
) == CODE_LABEL
)
992 if (INSN_DELETED_P (insn
))
995 body
= PATTERN (insn
);
996 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
998 /* This only takes room if read-only data goes into the text
1000 if (JUMP_TABLES_IN_TEXT_SECTION
|| !HAVE_READONLY_DATA_SECTION
)
1001 insn_lengths
[uid
] = (XVECLEN (body
,
1002 GET_CODE (body
) == ADDR_DIFF_VEC
)
1003 * GET_MODE_SIZE (GET_MODE (body
)));
1004 /* Alignment is handled by ADDR_VEC_ALIGN. */
1006 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
1007 insn_lengths
[uid
] = asm_insn_count (body
) * insn_default_length (insn
);
1008 else if (GET_CODE (body
) == SEQUENCE
)
1011 int const_delay_slots
;
1013 const_delay_slots
= const_num_delay_slots (XVECEXP (body
, 0, 0));
1015 const_delay_slots
= 0;
1017 /* Inside a delay slot sequence, we do not do any branch shortening
1018 if the shortening could change the number of delay slots
1020 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1022 rtx inner_insn
= XVECEXP (body
, 0, i
);
1023 int inner_uid
= INSN_UID (inner_insn
);
1026 if (GET_CODE (body
) == ASM_INPUT
1027 || asm_noperands (PATTERN (XVECEXP (body
, 0, i
))) >= 0)
1028 inner_length
= (asm_insn_count (PATTERN (inner_insn
))
1029 * insn_default_length (inner_insn
));
1031 inner_length
= insn_default_length (inner_insn
);
1033 insn_lengths
[inner_uid
] = inner_length
;
1034 if (const_delay_slots
)
1036 if ((varying_length
[inner_uid
]
1037 = insn_variable_length_p (inner_insn
)) != 0)
1038 varying_length
[uid
] = 1;
1039 INSN_ADDRESSES (inner_uid
) = (insn_current_address
1040 + insn_lengths
[uid
]);
1043 varying_length
[inner_uid
] = 0;
1044 insn_lengths
[uid
] += inner_length
;
1047 else if (GET_CODE (body
) != USE
&& GET_CODE (body
) != CLOBBER
)
1049 insn_lengths
[uid
] = insn_default_length (insn
);
1050 varying_length
[uid
] = insn_variable_length_p (insn
);
1053 /* If needed, do any adjustment. */
1054 #ifdef ADJUST_INSN_LENGTH
1055 ADJUST_INSN_LENGTH (insn
, insn_lengths
[uid
]);
1056 if (insn_lengths
[uid
] < 0)
1057 fatal_insn ("negative insn length", insn
);
1061 /* Now loop over all the insns finding varying length insns. For each,
1062 get the current insn length. If it has changed, reflect the change.
1063 When nothing changes for a full pass, we are done. */
1065 while (something_changed
)
1067 something_changed
= 0;
1068 insn_current_align
= MAX_CODE_ALIGN
- 1;
1069 for (insn_current_address
= FIRST_INSN_ADDRESS
, insn
= first
;
1071 insn
= NEXT_INSN (insn
))
1074 #ifdef ADJUST_INSN_LENGTH
1079 uid
= INSN_UID (insn
);
1081 if (GET_CODE (insn
) == CODE_LABEL
)
1083 int log
= LABEL_TO_ALIGNMENT (insn
);
1084 if (log
> insn_current_align
)
1086 int align
= 1 << log
;
1087 int new_address
= (insn_current_address
+ align
- 1) & -align
;
1088 insn_lengths
[uid
] = new_address
- insn_current_address
;
1089 insn_current_align
= log
;
1090 insn_current_address
= new_address
;
1093 insn_lengths
[uid
] = 0;
1094 INSN_ADDRESSES (uid
) = insn_current_address
;
1098 length_align
= INSN_LENGTH_ALIGNMENT (insn
);
1099 if (length_align
< insn_current_align
)
1100 insn_current_align
= length_align
;
1102 insn_last_address
= INSN_ADDRESSES (uid
);
1103 INSN_ADDRESSES (uid
) = insn_current_address
;
1105 #ifdef CASE_VECTOR_SHORTEN_MODE
1106 if (optimize
&& GET_CODE (insn
) == JUMP_INSN
1107 && GET_CODE (PATTERN (insn
)) == ADDR_DIFF_VEC
)
1109 rtx body
= PATTERN (insn
);
1110 int old_length
= insn_lengths
[uid
];
1111 rtx rel_lab
= XEXP (XEXP (body
, 0), 0);
1112 rtx min_lab
= XEXP (XEXP (body
, 2), 0);
1113 rtx max_lab
= XEXP (XEXP (body
, 3), 0);
1114 int rel_addr
= INSN_ADDRESSES (INSN_UID (rel_lab
));
1115 int min_addr
= INSN_ADDRESSES (INSN_UID (min_lab
));
1116 int max_addr
= INSN_ADDRESSES (INSN_UID (max_lab
));
1119 addr_diff_vec_flags flags
;
1121 /* Avoid automatic aggregate initialization. */
1122 flags
= ADDR_DIFF_VEC_FLAGS (body
);
1124 /* Try to find a known alignment for rel_lab. */
1125 for (prev
= rel_lab
;
1127 && ! insn_lengths
[INSN_UID (prev
)]
1128 && ! (varying_length
[INSN_UID (prev
)] & 1);
1129 prev
= PREV_INSN (prev
))
1130 if (varying_length
[INSN_UID (prev
)] & 2)
1132 rel_align
= LABEL_TO_ALIGNMENT (prev
);
1136 /* See the comment on addr_diff_vec_flags in rtl.h for the
1137 meaning of the flags values. base: REL_LAB vec: INSN */
1138 /* Anything after INSN has still addresses from the last
1139 pass; adjust these so that they reflect our current
1140 estimate for this pass. */
1141 if (flags
.base_after_vec
)
1142 rel_addr
+= insn_current_address
- insn_last_address
;
1143 if (flags
.min_after_vec
)
1144 min_addr
+= insn_current_address
- insn_last_address
;
1145 if (flags
.max_after_vec
)
1146 max_addr
+= insn_current_address
- insn_last_address
;
1147 /* We want to know the worst case, i.e. lowest possible value
1148 for the offset of MIN_LAB. If MIN_LAB is after REL_LAB,
1149 its offset is positive, and we have to be wary of code shrink;
1150 otherwise, it is negative, and we have to be vary of code
1152 if (flags
.min_after_base
)
1154 /* If INSN is between REL_LAB and MIN_LAB, the size
1155 changes we are about to make can change the alignment
1156 within the observed offset, therefore we have to break
1157 it up into two parts that are independent. */
1158 if (! flags
.base_after_vec
&& flags
.min_after_vec
)
1160 min_addr
-= align_fuzz (rel_lab
, insn
, rel_align
, 0);
1161 min_addr
-= align_fuzz (insn
, min_lab
, 0, 0);
1164 min_addr
-= align_fuzz (rel_lab
, min_lab
, rel_align
, 0);
1168 if (flags
.base_after_vec
&& ! flags
.min_after_vec
)
1170 min_addr
-= align_fuzz (min_lab
, insn
, 0, ~0);
1171 min_addr
-= align_fuzz (insn
, rel_lab
, 0, ~0);
1174 min_addr
-= align_fuzz (min_lab
, rel_lab
, 0, ~0);
1176 /* Likewise, determine the highest lowest possible value
1177 for the offset of MAX_LAB. */
1178 if (flags
.max_after_base
)
1180 if (! flags
.base_after_vec
&& flags
.max_after_vec
)
1182 max_addr
+= align_fuzz (rel_lab
, insn
, rel_align
, ~0);
1183 max_addr
+= align_fuzz (insn
, max_lab
, 0, ~0);
1186 max_addr
+= align_fuzz (rel_lab
, max_lab
, rel_align
, ~0);
1190 if (flags
.base_after_vec
&& ! flags
.max_after_vec
)
1192 max_addr
+= align_fuzz (max_lab
, insn
, 0, 0);
1193 max_addr
+= align_fuzz (insn
, rel_lab
, 0, 0);
1196 max_addr
+= align_fuzz (max_lab
, rel_lab
, 0, 0);
1198 PUT_MODE (body
, CASE_VECTOR_SHORTEN_MODE (min_addr
- rel_addr
,
1199 max_addr
- rel_addr
,
1201 if (JUMP_TABLES_IN_TEXT_SECTION
|| !HAVE_READONLY_DATA_SECTION
)
1204 = (XVECLEN (body
, 1) * GET_MODE_SIZE (GET_MODE (body
)));
1205 insn_current_address
+= insn_lengths
[uid
];
1206 if (insn_lengths
[uid
] != old_length
)
1207 something_changed
= 1;
1212 #endif /* CASE_VECTOR_SHORTEN_MODE */
1214 if (! (varying_length
[uid
]))
1216 if (GET_CODE (insn
) == INSN
1217 && GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1221 body
= PATTERN (insn
);
1222 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1224 rtx inner_insn
= XVECEXP (body
, 0, i
);
1225 int inner_uid
= INSN_UID (inner_insn
);
1227 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1229 insn_current_address
+= insn_lengths
[inner_uid
];
1233 insn_current_address
+= insn_lengths
[uid
];
1238 if (GET_CODE (insn
) == INSN
&& GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1242 body
= PATTERN (insn
);
1244 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1246 rtx inner_insn
= XVECEXP (body
, 0, i
);
1247 int inner_uid
= INSN_UID (inner_insn
);
1250 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1252 /* insn_current_length returns 0 for insns with a
1253 non-varying length. */
1254 if (! varying_length
[inner_uid
])
1255 inner_length
= insn_lengths
[inner_uid
];
1257 inner_length
= insn_current_length (inner_insn
);
1259 if (inner_length
!= insn_lengths
[inner_uid
])
1261 insn_lengths
[inner_uid
] = inner_length
;
1262 something_changed
= 1;
1264 insn_current_address
+= insn_lengths
[inner_uid
];
1265 new_length
+= inner_length
;
1270 new_length
= insn_current_length (insn
);
1271 insn_current_address
+= new_length
;
1274 #ifdef ADJUST_INSN_LENGTH
1275 /* If needed, do any adjustment. */
1276 tmp_length
= new_length
;
1277 ADJUST_INSN_LENGTH (insn
, new_length
);
1278 insn_current_address
+= (new_length
- tmp_length
);
1281 if (new_length
!= insn_lengths
[uid
])
1283 insn_lengths
[uid
] = new_length
;
1284 something_changed
= 1;
1287 /* For a non-optimizing compile, do only a single pass. */
1292 free (varying_length
);
1294 #endif /* HAVE_ATTR_length */
1297 #ifdef HAVE_ATTR_length
1298 /* Given the body of an INSN known to be generated by an ASM statement, return
1299 the number of machine instructions likely to be generated for this insn.
1300 This is used to compute its length. */
1303 asm_insn_count (rtx body
)
1305 const char *template;
1308 if (GET_CODE (body
) == ASM_INPUT
)
1309 template = XSTR (body
, 0);
1311 template = decode_asm_operands (body
, NULL
, NULL
, NULL
, NULL
);
1313 for (; *template; template++)
1314 if (IS_ASM_LOGICAL_LINE_SEPARATOR (*template) || *template == '\n')
1321 /* Output assembler code for the start of a function,
1322 and initialize some of the variables in this file
1323 for the new function. The label for the function and associated
1324 assembler pseudo-ops have already been output in `assemble_start_function'.
1326 FIRST is the first insn of the rtl for the function being compiled.
1327 FILE is the file to write assembler code to.
1328 OPTIMIZE is nonzero if we should eliminate redundant
1329 test and compare insns. */
1332 final_start_function (rtx first ATTRIBUTE_UNUSED
, FILE *file
,
1333 int optimize ATTRIBUTE_UNUSED
)
1337 this_is_asm_operands
= 0;
1339 #ifdef NON_SAVING_SETJMP
1340 /* A function that calls setjmp should save and restore all the
1341 call-saved registers on a system where longjmp clobbers them. */
1342 if (NON_SAVING_SETJMP
&& current_function_calls_setjmp
)
1346 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1347 if (!call_used_regs
[i
])
1348 regs_ever_live
[i
] = 1;
1352 last_filename
= locator_file (prologue_locator
);
1353 last_linenum
= locator_line (prologue_locator
);
1355 high_block_linenum
= high_function_linenum
= last_linenum
;
1357 (*debug_hooks
->begin_prologue
) (last_linenum
, last_filename
);
1359 #if defined (DWARF2_UNWIND_INFO) || defined (IA64_UNWIND_INFO)
1360 if (write_symbols
!= DWARF2_DEBUG
&& write_symbols
!= VMS_AND_DWARF2_DEBUG
)
1361 dwarf2out_begin_prologue (0, NULL
);
1364 #ifdef LEAF_REG_REMAP
1365 if (current_function_uses_only_leaf_regs
)
1366 leaf_renumber_regs (first
);
1369 /* The Sun386i and perhaps other machines don't work right
1370 if the profiling code comes after the prologue. */
1371 #ifdef PROFILE_BEFORE_PROLOGUE
1372 if (current_function_profile
)
1373 profile_function (file
);
1374 #endif /* PROFILE_BEFORE_PROLOGUE */
1376 #if defined (DWARF2_UNWIND_INFO) && defined (HAVE_prologue)
1377 if (dwarf2out_do_frame ())
1378 dwarf2out_frame_debug (NULL_RTX
);
1381 /* If debugging, assign block numbers to all of the blocks in this
1385 remove_unnecessary_notes ();
1386 reemit_insn_block_notes ();
1387 number_blocks (current_function_decl
);
1388 /* We never actually put out begin/end notes for the top-level
1389 block in the function. But, conceptually, that block is
1391 TREE_ASM_WRITTEN (DECL_INITIAL (current_function_decl
)) = 1;
1394 /* First output the function prologue: code to set up the stack frame. */
1395 (*targetm
.asm_out
.function_prologue
) (file
, get_frame_size ());
1397 /* If the machine represents the prologue as RTL, the profiling code must
1398 be emitted when NOTE_INSN_PROLOGUE_END is scanned. */
1399 #ifdef HAVE_prologue
1400 if (! HAVE_prologue
)
1402 profile_after_prologue (file
);
1406 profile_after_prologue (FILE *file ATTRIBUTE_UNUSED
)
1408 #ifndef PROFILE_BEFORE_PROLOGUE
1409 if (current_function_profile
)
1410 profile_function (file
);
1411 #endif /* not PROFILE_BEFORE_PROLOGUE */
1415 profile_function (FILE *file ATTRIBUTE_UNUSED
)
1417 #ifndef NO_PROFILE_COUNTERS
1418 # define NO_PROFILE_COUNTERS 0
1420 #if defined(ASM_OUTPUT_REG_PUSH)
1421 int sval
= current_function_returns_struct
;
1422 rtx svrtx
= targetm
.calls
.struct_value_rtx (TREE_TYPE (current_function_decl
), 1);
1423 #if defined(STATIC_CHAIN_INCOMING_REGNUM) || defined(STATIC_CHAIN_REGNUM)
1424 int cxt
= current_function_needs_context
;
1426 #endif /* ASM_OUTPUT_REG_PUSH */
1428 if (! NO_PROFILE_COUNTERS
)
1430 int align
= MIN (BIGGEST_ALIGNMENT
, LONG_TYPE_SIZE
);
1432 ASM_OUTPUT_ALIGN (file
, floor_log2 (align
/ BITS_PER_UNIT
));
1433 (*targetm
.asm_out
.internal_label
) (file
, "LP", current_function_funcdef_no
);
1434 assemble_integer (const0_rtx
, LONG_TYPE_SIZE
/ BITS_PER_UNIT
, align
, 1);
1437 function_section (current_function_decl
);
1439 #if defined(ASM_OUTPUT_REG_PUSH)
1440 if (sval
&& GET_CODE (svrtx
) == REG
)
1441 ASM_OUTPUT_REG_PUSH (file
, REGNO (svrtx
));
1444 #if defined(STATIC_CHAIN_INCOMING_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1446 ASM_OUTPUT_REG_PUSH (file
, STATIC_CHAIN_INCOMING_REGNUM
);
1448 #if defined(STATIC_CHAIN_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1451 ASM_OUTPUT_REG_PUSH (file
, STATIC_CHAIN_REGNUM
);
1456 FUNCTION_PROFILER (file
, current_function_funcdef_no
);
1458 #if defined(STATIC_CHAIN_INCOMING_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1460 ASM_OUTPUT_REG_POP (file
, STATIC_CHAIN_INCOMING_REGNUM
);
1462 #if defined(STATIC_CHAIN_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1465 ASM_OUTPUT_REG_POP (file
, STATIC_CHAIN_REGNUM
);
1470 #if defined(ASM_OUTPUT_REG_PUSH)
1471 if (sval
&& GET_CODE (svrtx
) == REG
)
1472 ASM_OUTPUT_REG_POP (file
, REGNO (svrtx
));
1476 /* Output assembler code for the end of a function.
1477 For clarity, args are same as those of `final_start_function'
1478 even though not all of them are needed. */
1481 final_end_function (void)
1485 (*debug_hooks
->end_function
) (high_function_linenum
);
1487 /* Finally, output the function epilogue:
1488 code to restore the stack frame and return to the caller. */
1489 (*targetm
.asm_out
.function_epilogue
) (asm_out_file
, get_frame_size ());
1491 /* And debug output. */
1492 (*debug_hooks
->end_epilogue
) (last_linenum
, last_filename
);
1494 #if defined (DWARF2_UNWIND_INFO)
1495 if (write_symbols
!= DWARF2_DEBUG
&& write_symbols
!= VMS_AND_DWARF2_DEBUG
1496 && dwarf2out_do_frame ())
1497 dwarf2out_end_epilogue (last_linenum
, last_filename
);
1501 /* Output assembler code for some insns: all or part of a function.
1502 For description of args, see `final_start_function', above.
1504 PRESCAN is 1 if we are not really outputting,
1505 just scanning as if we were outputting.
1506 Prescanning deletes and rearranges insns just like ordinary output.
1507 PRESCAN is -2 if we are outputting after having prescanned.
1508 In this case, don't try to delete or rearrange insns
1509 because that has already been done.
1510 Prescanning is done only on certain machines. */
1513 final (rtx first
, FILE *file
, int optimize
, int prescan
)
1519 last_ignored_compare
= 0;
1521 /* Make a map indicating which line numbers appear in this function.
1522 When producing SDB debugging info, delete troublesome line number
1523 notes from inlined functions in other files as well as duplicate
1524 line number notes. */
1525 #ifdef SDB_DEBUGGING_INFO
1526 if (write_symbols
== SDB_DEBUG
)
1529 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
1530 if (GET_CODE (insn
) == NOTE
&& NOTE_LINE_NUMBER (insn
) > 0)
1532 if ((RTX_INTEGRATED_P (insn
)
1533 && strcmp (NOTE_SOURCE_FILE (insn
), main_input_filename
) != 0)
1535 && NOTE_LINE_NUMBER (insn
) == NOTE_LINE_NUMBER (last
)
1536 && NOTE_SOURCE_FILE (insn
) == NOTE_SOURCE_FILE (last
)))
1538 delete_insn (insn
); /* Use delete_note. */
1542 if (NOTE_LINE_NUMBER (insn
) > max_line
)
1543 max_line
= NOTE_LINE_NUMBER (insn
);
1549 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
1550 if (GET_CODE (insn
) == NOTE
&& NOTE_LINE_NUMBER (insn
) > max_line
)
1551 max_line
= NOTE_LINE_NUMBER (insn
);
1554 line_note_exists
= xcalloc (max_line
+ 1, sizeof (char));
1556 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
1558 if (INSN_UID (insn
) > max_uid
) /* Find largest UID. */
1559 max_uid
= INSN_UID (insn
);
1560 if (GET_CODE (insn
) == NOTE
&& NOTE_LINE_NUMBER (insn
) > 0)
1561 line_note_exists
[NOTE_LINE_NUMBER (insn
)] = 1;
1563 /* If CC tracking across branches is enabled, record the insn which
1564 jumps to each branch only reached from one place. */
1565 if (optimize
&& GET_CODE (insn
) == JUMP_INSN
)
1567 rtx lab
= JUMP_LABEL (insn
);
1568 if (lab
&& LABEL_NUSES (lab
) == 1)
1570 LABEL_REFS (lab
) = insn
;
1580 /* Output the insns. */
1581 for (insn
= NEXT_INSN (first
); insn
;)
1583 #ifdef HAVE_ATTR_length
1584 if ((unsigned) INSN_UID (insn
) >= INSN_ADDRESSES_SIZE ())
1586 /* This can be triggered by bugs elsewhere in the compiler if
1587 new insns are created after init_insn_lengths is called. */
1588 if (GET_CODE (insn
) == NOTE
)
1589 insn_current_address
= -1;
1594 insn_current_address
= INSN_ADDRESSES (INSN_UID (insn
));
1595 #endif /* HAVE_ATTR_length */
1597 insn
= final_scan_insn (insn
, file
, optimize
, prescan
, 0);
1600 free (line_note_exists
);
1601 line_note_exists
= NULL
;
1605 get_insn_template (int code
, rtx insn
)
1607 const void *output
= insn_data
[code
].output
;
1608 switch (insn_data
[code
].output_format
)
1610 case INSN_OUTPUT_FORMAT_SINGLE
:
1611 return (const char *) output
;
1612 case INSN_OUTPUT_FORMAT_MULTI
:
1613 return ((const char *const *) output
)[which_alternative
];
1614 case INSN_OUTPUT_FORMAT_FUNCTION
:
1617 return (*(insn_output_fn
) output
) (recog_data
.operand
, insn
);
1624 /* Emit the appropriate declaration for an alternate-entry-point
1625 symbol represented by INSN, to FILE. INSN is a CODE_LABEL with
1626 LABEL_KIND != LABEL_NORMAL.
1628 The case fall-through in this function is intentional. */
1630 output_alternate_entry_point (FILE *file
, rtx insn
)
1632 const char *name
= LABEL_NAME (insn
);
1634 switch (LABEL_KIND (insn
))
1636 case LABEL_WEAK_ENTRY
:
1637 #ifdef ASM_WEAKEN_LABEL
1638 ASM_WEAKEN_LABEL (file
, name
);
1640 case LABEL_GLOBAL_ENTRY
:
1641 (*targetm
.asm_out
.globalize_label
) (file
, name
);
1642 case LABEL_STATIC_ENTRY
:
1643 #ifdef ASM_OUTPUT_TYPE_DIRECTIVE
1644 ASM_OUTPUT_TYPE_DIRECTIVE (file
, name
, "function");
1646 ASM_OUTPUT_LABEL (file
, name
);
1655 /* The final scan for one insn, INSN.
1656 Args are same as in `final', except that INSN
1657 is the insn being scanned.
1658 Value returned is the next insn to be scanned.
1660 NOPEEPHOLES is the flag to disallow peephole processing (currently
1661 used for within delayed branch sequence output). */
1664 final_scan_insn (rtx insn
, FILE *file
, int optimize ATTRIBUTE_UNUSED
,
1665 int prescan
, int nopeepholes ATTRIBUTE_UNUSED
)
1673 /* Ignore deleted insns. These can occur when we split insns (due to a
1674 template of "#") while not optimizing. */
1675 if (INSN_DELETED_P (insn
))
1676 return NEXT_INSN (insn
);
1678 switch (GET_CODE (insn
))
1684 switch (NOTE_LINE_NUMBER (insn
))
1686 case NOTE_INSN_DELETED
:
1687 case NOTE_INSN_LOOP_BEG
:
1688 case NOTE_INSN_LOOP_END
:
1689 case NOTE_INSN_LOOP_END_TOP_COND
:
1690 case NOTE_INSN_LOOP_CONT
:
1691 case NOTE_INSN_LOOP_VTOP
:
1692 case NOTE_INSN_FUNCTION_END
:
1693 case NOTE_INSN_REPEATED_LINE_NUMBER
:
1694 case NOTE_INSN_EXPECTED_VALUE
:
1697 case NOTE_INSN_BASIC_BLOCK
:
1698 #ifdef IA64_UNWIND_INFO
1699 IA64_UNWIND_EMIT (asm_out_file
, insn
);
1702 fprintf (asm_out_file
, "\t%s basic block %d\n",
1703 ASM_COMMENT_START
, NOTE_BASIC_BLOCK (insn
)->index
);
1706 case NOTE_INSN_EH_REGION_BEG
:
1707 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHB",
1708 NOTE_EH_HANDLER (insn
));
1711 case NOTE_INSN_EH_REGION_END
:
1712 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHE",
1713 NOTE_EH_HANDLER (insn
));
1716 case NOTE_INSN_PROLOGUE_END
:
1717 (*targetm
.asm_out
.function_end_prologue
) (file
);
1718 profile_after_prologue (file
);
1721 case NOTE_INSN_EPILOGUE_BEG
:
1722 (*targetm
.asm_out
.function_begin_epilogue
) (file
);
1725 case NOTE_INSN_FUNCTION_BEG
:
1727 (*debug_hooks
->end_prologue
) (last_linenum
, last_filename
);
1730 case NOTE_INSN_BLOCK_BEG
:
1731 if (debug_info_level
== DINFO_LEVEL_NORMAL
1732 || debug_info_level
== DINFO_LEVEL_VERBOSE
1733 || write_symbols
== DWARF_DEBUG
1734 || write_symbols
== DWARF2_DEBUG
1735 || write_symbols
== VMS_AND_DWARF2_DEBUG
1736 || write_symbols
== VMS_DEBUG
)
1738 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
1742 high_block_linenum
= last_linenum
;
1744 /* Output debugging info about the symbol-block beginning. */
1745 (*debug_hooks
->begin_block
) (last_linenum
, n
);
1747 /* Mark this block as output. */
1748 TREE_ASM_WRITTEN (NOTE_BLOCK (insn
)) = 1;
1752 case NOTE_INSN_BLOCK_END
:
1753 if (debug_info_level
== DINFO_LEVEL_NORMAL
1754 || debug_info_level
== DINFO_LEVEL_VERBOSE
1755 || write_symbols
== DWARF_DEBUG
1756 || write_symbols
== DWARF2_DEBUG
1757 || write_symbols
== VMS_AND_DWARF2_DEBUG
1758 || write_symbols
== VMS_DEBUG
)
1760 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
1764 /* End of a symbol-block. */
1766 if (block_depth
< 0)
1769 (*debug_hooks
->end_block
) (high_block_linenum
, n
);
1773 case NOTE_INSN_DELETED_LABEL
:
1774 /* Emit the label. We may have deleted the CODE_LABEL because
1775 the label could be proved to be unreachable, though still
1776 referenced (in the form of having its address taken. */
1777 ASM_OUTPUT_DEBUG_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
));
1784 if (NOTE_LINE_NUMBER (insn
) <= 0)
1791 #if defined (DWARF2_UNWIND_INFO)
1792 if (dwarf2out_do_frame ())
1793 dwarf2out_frame_debug (insn
);
1798 /* The target port might emit labels in the output function for
1799 some insn, e.g. sh.c output_branchy_insn. */
1800 if (CODE_LABEL_NUMBER (insn
) <= max_labelno
)
1802 int align
= LABEL_TO_ALIGNMENT (insn
);
1803 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
1804 int max_skip
= LABEL_TO_MAX_SKIP (insn
);
1807 if (align
&& NEXT_INSN (insn
))
1809 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
1810 ASM_OUTPUT_MAX_SKIP_ALIGN (file
, align
, max_skip
);
1812 #ifdef ASM_OUTPUT_ALIGN_WITH_NOP
1813 ASM_OUTPUT_ALIGN_WITH_NOP (file
, align
);
1815 ASM_OUTPUT_ALIGN (file
, align
);
1822 /* If this label is reached from only one place, set the condition
1823 codes from the instruction just before the branch. */
1825 /* Disabled because some insns set cc_status in the C output code
1826 and NOTICE_UPDATE_CC alone can set incorrect status. */
1827 if (0 /* optimize && LABEL_NUSES (insn) == 1*/)
1829 rtx jump
= LABEL_REFS (insn
);
1830 rtx barrier
= prev_nonnote_insn (insn
);
1832 /* If the LABEL_REFS field of this label has been set to point
1833 at a branch, the predecessor of the branch is a regular
1834 insn, and that branch is the only way to reach this label,
1835 set the condition codes based on the branch and its
1837 if (barrier
&& GET_CODE (barrier
) == BARRIER
1838 && jump
&& GET_CODE (jump
) == JUMP_INSN
1839 && (prev
= prev_nonnote_insn (jump
))
1840 && GET_CODE (prev
) == INSN
)
1842 NOTICE_UPDATE_CC (PATTERN (prev
), prev
);
1843 NOTICE_UPDATE_CC (PATTERN (jump
), jump
);
1850 #ifdef FINAL_PRESCAN_LABEL
1851 FINAL_PRESCAN_INSN (insn
, NULL
, 0);
1854 if (LABEL_NAME (insn
))
1855 (*debug_hooks
->label
) (insn
);
1859 fputs (ASM_APP_OFF
, file
);
1862 if (NEXT_INSN (insn
) != 0
1863 && GET_CODE (NEXT_INSN (insn
)) == JUMP_INSN
)
1865 rtx nextbody
= PATTERN (NEXT_INSN (insn
));
1867 /* If this label is followed by a jump-table,
1868 make sure we put the label in the read-only section. Also
1869 possibly write the label and jump table together. */
1871 if (GET_CODE (nextbody
) == ADDR_VEC
1872 || GET_CODE (nextbody
) == ADDR_DIFF_VEC
)
1874 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
1875 /* In this case, the case vector is being moved by the
1876 target, so don't output the label at all. Leave that
1877 to the back end macros. */
1879 if (! JUMP_TABLES_IN_TEXT_SECTION
)
1883 readonly_data_section ();
1885 #ifdef ADDR_VEC_ALIGN
1886 log_align
= ADDR_VEC_ALIGN (NEXT_INSN (insn
));
1888 log_align
= exact_log2 (BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
);
1890 ASM_OUTPUT_ALIGN (file
, log_align
);
1893 function_section (current_function_decl
);
1895 #ifdef ASM_OUTPUT_CASE_LABEL
1896 ASM_OUTPUT_CASE_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
),
1899 (*targetm
.asm_out
.internal_label
) (file
, "L", CODE_LABEL_NUMBER (insn
));
1905 if (LABEL_ALT_ENTRY_P (insn
))
1906 output_alternate_entry_point (file
, insn
);
1908 (*targetm
.asm_out
.internal_label
) (file
, "L", CODE_LABEL_NUMBER (insn
));
1913 rtx body
= PATTERN (insn
);
1914 int insn_code_number
;
1915 const char *template;
1918 /* An INSN, JUMP_INSN or CALL_INSN.
1919 First check for special kinds that recog doesn't recognize. */
1921 if (GET_CODE (body
) == USE
/* These are just declarations */
1922 || GET_CODE (body
) == CLOBBER
)
1926 /* If there is a REG_CC_SETTER note on this insn, it means that
1927 the setting of the condition code was done in the delay slot
1928 of the insn that branched here. So recover the cc status
1929 from the insn that set it. */
1931 note
= find_reg_note (insn
, REG_CC_SETTER
, NULL_RTX
);
1934 NOTICE_UPDATE_CC (PATTERN (XEXP (note
, 0)), XEXP (note
, 0));
1935 cc_prev_status
= cc_status
;
1939 /* Detect insns that are really jump-tables
1940 and output them as such. */
1942 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
1944 #if !(defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC))
1953 fputs (ASM_APP_OFF
, file
);
1957 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
1958 if (GET_CODE (body
) == ADDR_VEC
)
1960 #ifdef ASM_OUTPUT_ADDR_VEC
1961 ASM_OUTPUT_ADDR_VEC (PREV_INSN (insn
), body
);
1968 #ifdef ASM_OUTPUT_ADDR_DIFF_VEC
1969 ASM_OUTPUT_ADDR_DIFF_VEC (PREV_INSN (insn
), body
);
1975 vlen
= XVECLEN (body
, GET_CODE (body
) == ADDR_DIFF_VEC
);
1976 for (idx
= 0; idx
< vlen
; idx
++)
1978 if (GET_CODE (body
) == ADDR_VEC
)
1980 #ifdef ASM_OUTPUT_ADDR_VEC_ELT
1981 ASM_OUTPUT_ADDR_VEC_ELT
1982 (file
, CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 0, idx
), 0)));
1989 #ifdef ASM_OUTPUT_ADDR_DIFF_ELT
1990 ASM_OUTPUT_ADDR_DIFF_ELT
1993 CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 1, idx
), 0)),
1994 CODE_LABEL_NUMBER (XEXP (XEXP (body
, 0), 0)));
2000 #ifdef ASM_OUTPUT_CASE_END
2001 ASM_OUTPUT_CASE_END (file
,
2002 CODE_LABEL_NUMBER (PREV_INSN (insn
)),
2007 function_section (current_function_decl
);
2011 /* Output this line note if it is the first or the last line
2013 if (notice_source_line (insn
))
2015 (*debug_hooks
->source_line
) (last_linenum
, last_filename
);
2018 if (GET_CODE (body
) == ASM_INPUT
)
2020 const char *string
= XSTR (body
, 0);
2022 /* There's no telling what that did to the condition codes. */
2031 fputs (ASM_APP_ON
, file
);
2034 fprintf (asm_out_file
, "\t%s\n", string
);
2039 /* Detect `asm' construct with operands. */
2040 if (asm_noperands (body
) >= 0)
2042 unsigned int noperands
= asm_noperands (body
);
2043 rtx
*ops
= alloca (noperands
* sizeof (rtx
));
2046 /* There's no telling what that did to the condition codes. */
2051 /* Get out the operand values. */
2052 string
= decode_asm_operands (body
, ops
, NULL
, NULL
, NULL
);
2053 /* Inhibit aborts on what would otherwise be compiler bugs. */
2054 insn_noperands
= noperands
;
2055 this_is_asm_operands
= insn
;
2057 /* Output the insn using them. */
2062 fputs (ASM_APP_ON
, file
);
2065 output_asm_insn (string
, ops
);
2068 this_is_asm_operands
= 0;
2072 if (prescan
<= 0 && app_on
)
2074 fputs (ASM_APP_OFF
, file
);
2078 if (GET_CODE (body
) == SEQUENCE
)
2080 /* A delayed-branch sequence */
2086 final_sequence
= body
;
2088 /* Record the delay slots' frame information before the branch.
2089 This is needed for delayed calls: see execute_cfa_program(). */
2090 #if defined (DWARF2_UNWIND_INFO)
2091 if (dwarf2out_do_frame ())
2092 for (i
= 1; i
< XVECLEN (body
, 0); i
++)
2093 dwarf2out_frame_debug (XVECEXP (body
, 0, i
));
2096 /* The first insn in this SEQUENCE might be a JUMP_INSN that will
2097 force the restoration of a comparison that was previously
2098 thought unnecessary. If that happens, cancel this sequence
2099 and cause that insn to be restored. */
2101 next
= final_scan_insn (XVECEXP (body
, 0, 0), file
, 0, prescan
, 1);
2102 if (next
!= XVECEXP (body
, 0, 1))
2108 for (i
= 1; i
< XVECLEN (body
, 0); i
++)
2110 rtx insn
= XVECEXP (body
, 0, i
);
2111 rtx next
= NEXT_INSN (insn
);
2112 /* We loop in case any instruction in a delay slot gets
2115 insn
= final_scan_insn (insn
, file
, 0, prescan
, 1);
2116 while (insn
!= next
);
2118 #ifdef DBR_OUTPUT_SEQEND
2119 DBR_OUTPUT_SEQEND (file
);
2123 /* If the insn requiring the delay slot was a CALL_INSN, the
2124 insns in the delay slot are actually executed before the
2125 called function. Hence we don't preserve any CC-setting
2126 actions in these insns and the CC must be marked as being
2127 clobbered by the function. */
2128 if (GET_CODE (XVECEXP (body
, 0, 0)) == CALL_INSN
)
2135 /* We have a real machine instruction as rtl. */
2137 body
= PATTERN (insn
);
2140 set
= single_set (insn
);
2142 /* Check for redundant test and compare instructions
2143 (when the condition codes are already set up as desired).
2144 This is done only when optimizing; if not optimizing,
2145 it should be possible for the user to alter a variable
2146 with the debugger in between statements
2147 and the next statement should reexamine the variable
2148 to compute the condition codes. */
2153 rtx set
= single_set (insn
);
2157 && GET_CODE (SET_DEST (set
)) == CC0
2158 && insn
!= last_ignored_compare
)
2160 if (GET_CODE (SET_SRC (set
)) == SUBREG
)
2161 SET_SRC (set
) = alter_subreg (&SET_SRC (set
));
2162 else if (GET_CODE (SET_SRC (set
)) == COMPARE
)
2164 if (GET_CODE (XEXP (SET_SRC (set
), 0)) == SUBREG
)
2165 XEXP (SET_SRC (set
), 0)
2166 = alter_subreg (&XEXP (SET_SRC (set
), 0));
2167 if (GET_CODE (XEXP (SET_SRC (set
), 1)) == SUBREG
)
2168 XEXP (SET_SRC (set
), 1)
2169 = alter_subreg (&XEXP (SET_SRC (set
), 1));
2171 if ((cc_status
.value1
!= 0
2172 && rtx_equal_p (SET_SRC (set
), cc_status
.value1
))
2173 || (cc_status
.value2
!= 0
2174 && rtx_equal_p (SET_SRC (set
), cc_status
.value2
)))
2176 /* Don't delete insn if it has an addressing side-effect. */
2177 if (! FIND_REG_INC_NOTE (insn
, NULL_RTX
)
2178 /* or if anything in it is volatile. */
2179 && ! volatile_refs_p (PATTERN (insn
)))
2181 /* We don't really delete the insn; just ignore it. */
2182 last_ignored_compare
= insn
;
2191 /* Don't bother outputting obvious no-ops, even without -O.
2192 This optimization is fast and doesn't interfere with debugging.
2193 Don't do this if the insn is in a delay slot, since this
2194 will cause an improper number of delay insns to be written. */
2195 if (final_sequence
== 0
2197 && GET_CODE (insn
) == INSN
&& GET_CODE (body
) == SET
2198 && GET_CODE (SET_SRC (body
)) == REG
2199 && GET_CODE (SET_DEST (body
)) == REG
2200 && REGNO (SET_SRC (body
)) == REGNO (SET_DEST (body
)))
2205 /* If this is a conditional branch, maybe modify it
2206 if the cc's are in a nonstandard state
2207 so that it accomplishes the same thing that it would
2208 do straightforwardly if the cc's were set up normally. */
2210 if (cc_status
.flags
!= 0
2211 && GET_CODE (insn
) == JUMP_INSN
2212 && GET_CODE (body
) == SET
2213 && SET_DEST (body
) == pc_rtx
2214 && GET_CODE (SET_SRC (body
)) == IF_THEN_ELSE
2215 && GET_RTX_CLASS (GET_CODE (XEXP (SET_SRC (body
), 0))) == '<'
2216 && XEXP (XEXP (SET_SRC (body
), 0), 0) == cc0_rtx
2217 /* This is done during prescan; it is not done again
2218 in final scan when prescan has been done. */
2221 /* This function may alter the contents of its argument
2222 and clear some of the cc_status.flags bits.
2223 It may also return 1 meaning condition now always true
2224 or -1 meaning condition now always false
2225 or 2 meaning condition nontrivial but altered. */
2226 int result
= alter_cond (XEXP (SET_SRC (body
), 0));
2227 /* If condition now has fixed value, replace the IF_THEN_ELSE
2228 with its then-operand or its else-operand. */
2230 SET_SRC (body
) = XEXP (SET_SRC (body
), 1);
2232 SET_SRC (body
) = XEXP (SET_SRC (body
), 2);
2234 /* The jump is now either unconditional or a no-op.
2235 If it has become a no-op, don't try to output it.
2236 (It would not be recognized.) */
2237 if (SET_SRC (body
) == pc_rtx
)
2242 else if (GET_CODE (SET_SRC (body
)) == RETURN
)
2243 /* Replace (set (pc) (return)) with (return). */
2244 PATTERN (insn
) = body
= SET_SRC (body
);
2246 /* Rerecognize the instruction if it has changed. */
2248 INSN_CODE (insn
) = -1;
2251 /* Make same adjustments to instructions that examine the
2252 condition codes without jumping and instructions that
2253 handle conditional moves (if this machine has either one). */
2255 if (cc_status
.flags
!= 0
2258 rtx cond_rtx
, then_rtx
, else_rtx
;
2260 if (GET_CODE (insn
) != JUMP_INSN
2261 && GET_CODE (SET_SRC (set
)) == IF_THEN_ELSE
)
2263 cond_rtx
= XEXP (SET_SRC (set
), 0);
2264 then_rtx
= XEXP (SET_SRC (set
), 1);
2265 else_rtx
= XEXP (SET_SRC (set
), 2);
2269 cond_rtx
= SET_SRC (set
);
2270 then_rtx
= const_true_rtx
;
2271 else_rtx
= const0_rtx
;
2274 switch (GET_CODE (cond_rtx
))
2288 if (XEXP (cond_rtx
, 0) != cc0_rtx
)
2290 result
= alter_cond (cond_rtx
);
2292 validate_change (insn
, &SET_SRC (set
), then_rtx
, 0);
2293 else if (result
== -1)
2294 validate_change (insn
, &SET_SRC (set
), else_rtx
, 0);
2295 else if (result
== 2)
2296 INSN_CODE (insn
) = -1;
2297 if (SET_DEST (set
) == SET_SRC (set
))
2309 #ifdef HAVE_peephole
2310 /* Do machine-specific peephole optimizations if desired. */
2312 if (optimize
&& !flag_no_peephole
&& !nopeepholes
)
2314 rtx next
= peephole (insn
);
2315 /* When peepholing, if there were notes within the peephole,
2316 emit them before the peephole. */
2317 if (next
!= 0 && next
!= NEXT_INSN (insn
))
2319 rtx prev
= PREV_INSN (insn
);
2321 for (note
= NEXT_INSN (insn
); note
!= next
;
2322 note
= NEXT_INSN (note
))
2323 final_scan_insn (note
, file
, optimize
, prescan
, nopeepholes
);
2325 /* In case this is prescan, put the notes
2326 in proper position for later rescan. */
2327 note
= NEXT_INSN (insn
);
2328 PREV_INSN (note
) = prev
;
2329 NEXT_INSN (prev
) = note
;
2330 NEXT_INSN (PREV_INSN (next
)) = insn
;
2331 PREV_INSN (insn
) = PREV_INSN (next
);
2332 NEXT_INSN (insn
) = next
;
2333 PREV_INSN (next
) = insn
;
2336 /* PEEPHOLE might have changed this. */
2337 body
= PATTERN (insn
);
2341 /* Try to recognize the instruction.
2342 If successful, verify that the operands satisfy the
2343 constraints for the instruction. Crash if they don't,
2344 since `reload' should have changed them so that they do. */
2346 insn_code_number
= recog_memoized (insn
);
2347 cleanup_subreg_operands (insn
);
2349 /* Dump the insn in the assembly for debugging. */
2350 if (flag_dump_rtl_in_asm
)
2352 print_rtx_head
= ASM_COMMENT_START
;
2353 print_rtl_single (asm_out_file
, insn
);
2354 print_rtx_head
= "";
2357 if (! constrain_operands_cached (1))
2358 fatal_insn_not_found (insn
);
2360 /* Some target machines need to prescan each insn before
2363 #ifdef FINAL_PRESCAN_INSN
2364 FINAL_PRESCAN_INSN (insn
, recog_data
.operand
, recog_data
.n_operands
);
2367 #ifdef HAVE_conditional_execution
2368 if (GET_CODE (PATTERN (insn
)) == COND_EXEC
)
2369 current_insn_predicate
= COND_EXEC_TEST (PATTERN (insn
));
2371 current_insn_predicate
= NULL_RTX
;
2375 cc_prev_status
= cc_status
;
2377 /* Update `cc_status' for this instruction.
2378 The instruction's output routine may change it further.
2379 If the output routine for a jump insn needs to depend
2380 on the cc status, it should look at cc_prev_status. */
2382 NOTICE_UPDATE_CC (body
, insn
);
2385 current_output_insn
= debug_insn
= insn
;
2387 #if defined (DWARF2_UNWIND_INFO)
2388 if (GET_CODE (insn
) == CALL_INSN
&& dwarf2out_do_frame ())
2389 dwarf2out_frame_debug (insn
);
2392 /* Find the proper template for this insn. */
2393 template = get_insn_template (insn_code_number
, insn
);
2395 /* If the C code returns 0, it means that it is a jump insn
2396 which follows a deleted test insn, and that test insn
2397 needs to be reinserted. */
2402 if (prev_nonnote_insn (insn
) != last_ignored_compare
)
2405 /* We have already processed the notes between the setter and
2406 the user. Make sure we don't process them again, this is
2407 particularly important if one of the notes is a block
2408 scope note or an EH note. */
2410 prev
!= last_ignored_compare
;
2411 prev
= PREV_INSN (prev
))
2413 if (GET_CODE (prev
) == NOTE
)
2414 delete_insn (prev
); /* Use delete_note. */
2420 /* If the template is the string "#", it means that this insn must
2422 if (template[0] == '#' && template[1] == '\0')
2424 rtx
new = try_split (body
, insn
, 0);
2426 /* If we didn't split the insn, go away. */
2427 if (new == insn
&& PATTERN (new) == body
)
2428 fatal_insn ("could not split insn", insn
);
2430 #ifdef HAVE_ATTR_length
2431 /* This instruction should have been split in shorten_branches,
2432 to ensure that we would have valid length info for the
2443 #ifdef IA64_UNWIND_INFO
2444 IA64_UNWIND_EMIT (asm_out_file
, insn
);
2446 /* Output assembler code from the template. */
2448 output_asm_insn (template, recog_data
.operand
);
2450 /* If necessary, report the effect that the instruction has on
2451 the unwind info. We've already done this for delay slots
2452 and call instructions. */
2453 #if defined (DWARF2_UNWIND_INFO)
2454 if (GET_CODE (insn
) == INSN
2455 #if !defined (HAVE_prologue)
2456 && !ACCUMULATE_OUTGOING_ARGS
2458 && final_sequence
== 0
2459 && dwarf2out_do_frame ())
2460 dwarf2out_frame_debug (insn
);
2464 /* It's not at all clear why we did this and doing so used to
2465 interfere with tests that used REG_WAS_0 notes, which are
2466 now gone, so let's try with this out. */
2468 /* Mark this insn as having been output. */
2469 INSN_DELETED_P (insn
) = 1;
2472 /* Emit information for vtable gc. */
2473 note
= find_reg_note (insn
, REG_VTABLE_REF
, NULL_RTX
);
2475 current_output_insn
= debug_insn
= 0;
2478 return NEXT_INSN (insn
);
2481 /* Output debugging info to the assembler file FILE
2482 based on the NOTE-insn INSN, assumed to be a line number. */
2485 notice_source_line (rtx insn
)
2487 const char *filename
= insn_file (insn
);
2488 int linenum
= insn_line (insn
);
2490 if (filename
&& (filename
!= last_filename
|| last_linenum
!= linenum
))
2492 last_filename
= filename
;
2493 last_linenum
= linenum
;
2494 high_block_linenum
= MAX (last_linenum
, high_block_linenum
);
2495 high_function_linenum
= MAX (last_linenum
, high_function_linenum
);
2501 /* For each operand in INSN, simplify (subreg (reg)) so that it refers
2502 directly to the desired hard register. */
2505 cleanup_subreg_operands (rtx insn
)
2508 extract_insn_cached (insn
);
2509 for (i
= 0; i
< recog_data
.n_operands
; i
++)
2511 /* The following test cannot use recog_data.operand when testing
2512 for a SUBREG: the underlying object might have been changed
2513 already if we are inside a match_operator expression that
2514 matches the else clause. Instead we test the underlying
2515 expression directly. */
2516 if (GET_CODE (*recog_data
.operand_loc
[i
]) == SUBREG
)
2517 recog_data
.operand
[i
] = alter_subreg (recog_data
.operand_loc
[i
]);
2518 else if (GET_CODE (recog_data
.operand
[i
]) == PLUS
2519 || GET_CODE (recog_data
.operand
[i
]) == MULT
2520 || GET_CODE (recog_data
.operand
[i
]) == MEM
)
2521 recog_data
.operand
[i
] = walk_alter_subreg (recog_data
.operand_loc
[i
]);
2524 for (i
= 0; i
< recog_data
.n_dups
; i
++)
2526 if (GET_CODE (*recog_data
.dup_loc
[i
]) == SUBREG
)
2527 *recog_data
.dup_loc
[i
] = alter_subreg (recog_data
.dup_loc
[i
]);
2528 else if (GET_CODE (*recog_data
.dup_loc
[i
]) == PLUS
2529 || GET_CODE (*recog_data
.dup_loc
[i
]) == MULT
2530 || GET_CODE (*recog_data
.dup_loc
[i
]) == MEM
)
2531 *recog_data
.dup_loc
[i
] = walk_alter_subreg (recog_data
.dup_loc
[i
]);
2535 /* If X is a SUBREG, replace it with a REG or a MEM,
2536 based on the thing it is a subreg of. */
2539 alter_subreg (rtx
*xp
)
2542 rtx y
= SUBREG_REG (x
);
2544 /* simplify_subreg does not remove subreg from volatile references.
2545 We are required to. */
2546 if (GET_CODE (y
) == MEM
)
2547 *xp
= adjust_address (y
, GET_MODE (x
), SUBREG_BYTE (x
));
2550 rtx
new = simplify_subreg (GET_MODE (x
), y
, GET_MODE (y
),
2555 /* Simplify_subreg can't handle some REG cases, but we have to. */
2556 else if (GET_CODE (y
) == REG
)
2558 unsigned int regno
= subreg_hard_regno (x
, 1);
2559 *xp
= gen_rtx_REG_offset (y
, GET_MODE (x
), regno
, SUBREG_BYTE (x
));
2568 /* Do alter_subreg on all the SUBREGs contained in X. */
2571 walk_alter_subreg (rtx
*xp
)
2574 switch (GET_CODE (x
))
2578 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0));
2579 XEXP (x
, 1) = walk_alter_subreg (&XEXP (x
, 1));
2583 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0));
2587 return alter_subreg (xp
);
2598 /* Given BODY, the body of a jump instruction, alter the jump condition
2599 as required by the bits that are set in cc_status.flags.
2600 Not all of the bits there can be handled at this level in all cases.
2602 The value is normally 0.
2603 1 means that the condition has become always true.
2604 -1 means that the condition has become always false.
2605 2 means that COND has been altered. */
2608 alter_cond (rtx cond
)
2612 if (cc_status
.flags
& CC_REVERSED
)
2615 PUT_CODE (cond
, swap_condition (GET_CODE (cond
)));
2618 if (cc_status
.flags
& CC_INVERTED
)
2621 PUT_CODE (cond
, reverse_condition (GET_CODE (cond
)));
2624 if (cc_status
.flags
& CC_NOT_POSITIVE
)
2625 switch (GET_CODE (cond
))
2630 /* Jump becomes unconditional. */
2636 /* Jump becomes no-op. */
2640 PUT_CODE (cond
, EQ
);
2645 PUT_CODE (cond
, NE
);
2653 if (cc_status
.flags
& CC_NOT_NEGATIVE
)
2654 switch (GET_CODE (cond
))
2658 /* Jump becomes unconditional. */
2663 /* Jump becomes no-op. */
2668 PUT_CODE (cond
, EQ
);
2674 PUT_CODE (cond
, NE
);
2682 if (cc_status
.flags
& CC_NO_OVERFLOW
)
2683 switch (GET_CODE (cond
))
2686 /* Jump becomes unconditional. */
2690 PUT_CODE (cond
, EQ
);
2695 PUT_CODE (cond
, NE
);
2700 /* Jump becomes no-op. */
2707 if (cc_status
.flags
& (CC_Z_IN_NOT_N
| CC_Z_IN_N
))
2708 switch (GET_CODE (cond
))
2714 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? GE
: LT
);
2719 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? LT
: GE
);
2724 if (cc_status
.flags
& CC_NOT_SIGNED
)
2725 /* The flags are valid if signed condition operators are converted
2727 switch (GET_CODE (cond
))
2730 PUT_CODE (cond
, LEU
);
2735 PUT_CODE (cond
, LTU
);
2740 PUT_CODE (cond
, GTU
);
2745 PUT_CODE (cond
, GEU
);
2757 /* Report inconsistency between the assembler template and the operands.
2758 In an `asm', it's the user's fault; otherwise, the compiler's fault. */
2761 output_operand_lossage (const char *msgid
, ...)
2765 const char *pfx_str
;
2768 va_start (ap
, msgid
);
2770 pfx_str
= this_is_asm_operands
? _("invalid `asm': ") : "output_operand: ";
2771 asprintf (&fmt_string
, "%s%s", pfx_str
, _(msgid
));
2772 vasprintf (&new_message
, fmt_string
, ap
);
2774 if (this_is_asm_operands
)
2775 error_for_asm (this_is_asm_operands
, "%s", new_message
);
2777 internal_error ("%s", new_message
);
2784 /* Output of assembler code from a template, and its subroutines. */
2786 /* Annotate the assembly with a comment describing the pattern and
2787 alternative used. */
2790 output_asm_name (void)
2794 int num
= INSN_CODE (debug_insn
);
2795 fprintf (asm_out_file
, "\t%s %d\t%s",
2796 ASM_COMMENT_START
, INSN_UID (debug_insn
),
2797 insn_data
[num
].name
);
2798 if (insn_data
[num
].n_alternatives
> 1)
2799 fprintf (asm_out_file
, "/%d", which_alternative
+ 1);
2800 #ifdef HAVE_ATTR_length
2801 fprintf (asm_out_file
, "\t[length = %d]",
2802 get_attr_length (debug_insn
));
2804 /* Clear this so only the first assembler insn
2805 of any rtl insn will get the special comment for -dp. */
2810 /* If OP is a REG or MEM and we can find a MEM_EXPR corresponding to it
2811 or its address, return that expr . Set *PADDRESSP to 1 if the expr
2812 corresponds to the address of the object and 0 if to the object. */
2815 get_mem_expr_from_op (rtx op
, int *paddressp
)
2822 if (GET_CODE (op
) == REG
)
2823 return REG_EXPR (op
);
2824 else if (GET_CODE (op
) != MEM
)
2827 if (MEM_EXPR (op
) != 0)
2828 return MEM_EXPR (op
);
2830 /* Otherwise we have an address, so indicate it and look at the address. */
2834 /* First check if we have a decl for the address, then look at the right side
2835 if it is a PLUS. Otherwise, strip off arithmetic and keep looking.
2836 But don't allow the address to itself be indirect. */
2837 if ((expr
= get_mem_expr_from_op (op
, &inner_addressp
)) && ! inner_addressp
)
2839 else if (GET_CODE (op
) == PLUS
2840 && (expr
= get_mem_expr_from_op (XEXP (op
, 1), &inner_addressp
)))
2843 while (GET_RTX_CLASS (GET_CODE (op
)) == '1'
2844 || GET_RTX_CLASS (GET_CODE (op
)) == '2')
2847 expr
= get_mem_expr_from_op (op
, &inner_addressp
);
2848 return inner_addressp
? 0 : expr
;
2851 /* Output operand names for assembler instructions. OPERANDS is the
2852 operand vector, OPORDER is the order to write the operands, and NOPS
2853 is the number of operands to write. */
2856 output_asm_operand_names (rtx
*operands
, int *oporder
, int nops
)
2861 for (i
= 0; i
< nops
; i
++)
2864 rtx op
= operands
[oporder
[i
]];
2865 tree expr
= get_mem_expr_from_op (op
, &addressp
);
2867 fprintf (asm_out_file
, "%c%s",
2868 wrote
? ',' : '\t', wrote
? "" : ASM_COMMENT_START
);
2872 fprintf (asm_out_file
, "%s",
2873 addressp
? "*" : "");
2874 print_mem_expr (asm_out_file
, expr
);
2877 else if (REG_P (op
) && ORIGINAL_REGNO (op
)
2878 && ORIGINAL_REGNO (op
) != REGNO (op
))
2879 fprintf (asm_out_file
, " tmp%i", ORIGINAL_REGNO (op
));
2883 /* Output text from TEMPLATE to the assembler output file,
2884 obeying %-directions to substitute operands taken from
2885 the vector OPERANDS.
2887 %N (for N a digit) means print operand N in usual manner.
2888 %lN means require operand N to be a CODE_LABEL or LABEL_REF
2889 and print the label name with no punctuation.
2890 %cN means require operand N to be a constant
2891 and print the constant expression with no punctuation.
2892 %aN means expect operand N to be a memory address
2893 (not a memory reference!) and print a reference
2895 %nN means expect operand N to be a constant
2896 and print a constant expression for minus the value
2897 of the operand, with no other punctuation. */
2900 output_asm_insn (const char *template, rtx
*operands
)
2904 #ifdef ASSEMBLER_DIALECT
2907 int oporder
[MAX_RECOG_OPERANDS
];
2908 char opoutput
[MAX_RECOG_OPERANDS
];
2911 /* An insn may return a null string template
2912 in a case where no assembler code is needed. */
2916 memset (opoutput
, 0, sizeof opoutput
);
2918 putc ('\t', asm_out_file
);
2920 #ifdef ASM_OUTPUT_OPCODE
2921 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
2928 if (flag_verbose_asm
)
2929 output_asm_operand_names (operands
, oporder
, ops
);
2930 if (flag_print_asm_name
)
2934 memset (opoutput
, 0, sizeof opoutput
);
2936 putc (c
, asm_out_file
);
2937 #ifdef ASM_OUTPUT_OPCODE
2938 while ((c
= *p
) == '\t')
2940 putc (c
, asm_out_file
);
2943 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
2947 #ifdef ASSEMBLER_DIALECT
2953 output_operand_lossage ("nested assembly dialect alternatives");
2957 /* If we want the first dialect, do nothing. Otherwise, skip
2958 DIALECT_NUMBER of strings ending with '|'. */
2959 for (i
= 0; i
< dialect_number
; i
++)
2961 while (*p
&& *p
!= '}' && *p
++ != '|')
2970 output_operand_lossage ("unterminated assembly dialect alternative");
2977 /* Skip to close brace. */
2982 output_operand_lossage ("unterminated assembly dialect alternative");
2986 while (*p
++ != '}');
2990 putc (c
, asm_out_file
);
2995 putc (c
, asm_out_file
);
3001 /* %% outputs a single %. */
3005 putc (c
, asm_out_file
);
3007 /* %= outputs a number which is unique to each insn in the entire
3008 compilation. This is useful for making local labels that are
3009 referred to more than once in a given insn. */
3013 fprintf (asm_out_file
, "%d", insn_counter
);
3015 /* % followed by a letter and some digits
3016 outputs an operand in a special way depending on the letter.
3017 Letters `acln' are implemented directly.
3018 Other letters are passed to `output_operand' so that
3019 the PRINT_OPERAND macro can define them. */
3020 else if (ISALPHA (*p
))
3026 output_operand_lossage ("operand number missing after %%-letter");
3027 else if (this_is_asm_operands
3028 && (c
< 0 || (unsigned int) c
>= insn_noperands
))
3029 output_operand_lossage ("operand number out of range");
3030 else if (letter
== 'l')
3031 output_asm_label (operands
[c
]);
3032 else if (letter
== 'a')
3033 output_address (operands
[c
]);
3034 else if (letter
== 'c')
3036 if (CONSTANT_ADDRESS_P (operands
[c
]))
3037 output_addr_const (asm_out_file
, operands
[c
]);
3039 output_operand (operands
[c
], 'c');
3041 else if (letter
== 'n')
3043 if (GET_CODE (operands
[c
]) == CONST_INT
)
3044 fprintf (asm_out_file
, HOST_WIDE_INT_PRINT_DEC
,
3045 - INTVAL (operands
[c
]));
3048 putc ('-', asm_out_file
);
3049 output_addr_const (asm_out_file
, operands
[c
]);
3053 output_operand (operands
[c
], letter
);
3059 while (ISDIGIT (c
= *p
))
3062 /* % followed by a digit outputs an operand the default way. */
3063 else if (ISDIGIT (*p
))
3066 if (this_is_asm_operands
3067 && (c
< 0 || (unsigned int) c
>= insn_noperands
))
3068 output_operand_lossage ("operand number out of range");
3070 output_operand (operands
[c
], 0);
3076 while (ISDIGIT (c
= *p
))
3079 /* % followed by punctuation: output something for that
3080 punctuation character alone, with no operand.
3081 The PRINT_OPERAND macro decides what is actually done. */
3082 #ifdef PRINT_OPERAND_PUNCT_VALID_P
3083 else if (PRINT_OPERAND_PUNCT_VALID_P ((unsigned char) *p
))
3084 output_operand (NULL_RTX
, *p
++);
3087 output_operand_lossage ("invalid %%-code");
3091 putc (c
, asm_out_file
);
3094 /* Write out the variable names for operands, if we know them. */
3095 if (flag_verbose_asm
)
3096 output_asm_operand_names (operands
, oporder
, ops
);
3097 if (flag_print_asm_name
)
3100 putc ('\n', asm_out_file
);
3103 /* Output a LABEL_REF, or a bare CODE_LABEL, as an assembler symbol. */
3106 output_asm_label (rtx x
)
3110 if (GET_CODE (x
) == LABEL_REF
)
3112 if (GET_CODE (x
) == CODE_LABEL
3113 || (GET_CODE (x
) == NOTE
3114 && NOTE_LINE_NUMBER (x
) == NOTE_INSN_DELETED_LABEL
))
3115 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
3117 output_operand_lossage ("`%%l' operand isn't a label");
3119 assemble_name (asm_out_file
, buf
);
3122 /* Print operand X using machine-dependent assembler syntax.
3123 The macro PRINT_OPERAND is defined just to control this function.
3124 CODE is a non-digit that preceded the operand-number in the % spec,
3125 such as 'z' if the spec was `%z3'. CODE is 0 if there was no char
3126 between the % and the digits.
3127 When CODE is a non-letter, X is 0.
3129 The meanings of the letters are machine-dependent and controlled
3130 by PRINT_OPERAND. */
3133 output_operand (rtx x
, int code ATTRIBUTE_UNUSED
)
3135 if (x
&& GET_CODE (x
) == SUBREG
)
3136 x
= alter_subreg (&x
);
3138 /* If X is a pseudo-register, abort now rather than writing trash to the
3141 if (x
&& GET_CODE (x
) == REG
&& REGNO (x
) >= FIRST_PSEUDO_REGISTER
)
3144 PRINT_OPERAND (asm_out_file
, x
, code
);
3147 /* Print a memory reference operand for address X
3148 using machine-dependent assembler syntax.
3149 The macro PRINT_OPERAND_ADDRESS exists just to control this function. */
3152 output_address (rtx x
)
3154 walk_alter_subreg (&x
);
3155 PRINT_OPERAND_ADDRESS (asm_out_file
, x
);
3158 /* Print an integer constant expression in assembler syntax.
3159 Addition and subtraction are the only arithmetic
3160 that may appear in these expressions. */
3163 output_addr_const (FILE *file
, rtx x
)
3168 switch (GET_CODE (x
))
3175 #ifdef ASM_OUTPUT_SYMBOL_REF
3176 ASM_OUTPUT_SYMBOL_REF (file
, x
);
3178 assemble_name (file
, XSTR (x
, 0));
3186 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
3187 #ifdef ASM_OUTPUT_LABEL_REF
3188 ASM_OUTPUT_LABEL_REF (file
, buf
);
3190 assemble_name (file
, buf
);
3195 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (x
));
3199 /* This used to output parentheses around the expression,
3200 but that does not work on the 386 (either ATT or BSD assembler). */
3201 output_addr_const (file
, XEXP (x
, 0));
3205 if (GET_MODE (x
) == VOIDmode
)
3207 /* We can use %d if the number is one word and positive. */
3208 if (CONST_DOUBLE_HIGH (x
))
3209 fprintf (file
, HOST_WIDE_INT_PRINT_DOUBLE_HEX
,
3210 CONST_DOUBLE_HIGH (x
), CONST_DOUBLE_LOW (x
));
3211 else if (CONST_DOUBLE_LOW (x
) < 0)
3212 fprintf (file
, HOST_WIDE_INT_PRINT_HEX
, CONST_DOUBLE_LOW (x
));
3214 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, CONST_DOUBLE_LOW (x
));
3217 /* We can't handle floating point constants;
3218 PRINT_OPERAND must handle them. */
3219 output_operand_lossage ("floating constant misused");
3223 /* Some assemblers need integer constants to appear last (eg masm). */
3224 if (GET_CODE (XEXP (x
, 0)) == CONST_INT
)
3226 output_addr_const (file
, XEXP (x
, 1));
3227 if (INTVAL (XEXP (x
, 0)) >= 0)
3228 fprintf (file
, "+");
3229 output_addr_const (file
, XEXP (x
, 0));
3233 output_addr_const (file
, XEXP (x
, 0));
3234 if (GET_CODE (XEXP (x
, 1)) != CONST_INT
3235 || INTVAL (XEXP (x
, 1)) >= 0)
3236 fprintf (file
, "+");
3237 output_addr_const (file
, XEXP (x
, 1));
3242 /* Avoid outputting things like x-x or x+5-x,
3243 since some assemblers can't handle that. */
3244 x
= simplify_subtraction (x
);
3245 if (GET_CODE (x
) != MINUS
)
3248 output_addr_const (file
, XEXP (x
, 0));
3249 fprintf (file
, "-");
3250 if ((GET_CODE (XEXP (x
, 1)) == CONST_INT
&& INTVAL (XEXP (x
, 1)) >= 0)
3251 || GET_CODE (XEXP (x
, 1)) == PC
3252 || GET_CODE (XEXP (x
, 1)) == SYMBOL_REF
)
3253 output_addr_const (file
, XEXP (x
, 1));
3256 fputs (targetm
.asm_out
.open_paren
, file
);
3257 output_addr_const (file
, XEXP (x
, 1));
3258 fputs (targetm
.asm_out
.close_paren
, file
);
3265 output_addr_const (file
, XEXP (x
, 0));
3269 #ifdef OUTPUT_ADDR_CONST_EXTRA
3270 OUTPUT_ADDR_CONST_EXTRA (file
, x
, fail
);
3275 output_operand_lossage ("invalid expression as operand");
3279 /* A poor man's fprintf, with the added features of %I, %R, %L, and %U.
3280 %R prints the value of REGISTER_PREFIX.
3281 %L prints the value of LOCAL_LABEL_PREFIX.
3282 %U prints the value of USER_LABEL_PREFIX.
3283 %I prints the value of IMMEDIATE_PREFIX.
3284 %O runs ASM_OUTPUT_OPCODE to transform what follows in the string.
3285 Also supported are %d, %i, %u, %x, %X, %o, %c, %s and %%.
3287 We handle alternate assembler dialects here, just like output_asm_insn. */
3290 asm_fprintf (FILE *file
, const char *p
, ...)
3296 va_start (argptr
, p
);
3303 #ifdef ASSEMBLER_DIALECT
3308 /* If we want the first dialect, do nothing. Otherwise, skip
3309 DIALECT_NUMBER of strings ending with '|'. */
3310 for (i
= 0; i
< dialect_number
; i
++)
3312 while (*p
&& *p
++ != '|')
3322 /* Skip to close brace. */
3323 while (*p
&& *p
++ != '}')
3334 while (strchr ("-+ #0", c
))
3339 while (ISDIGIT (c
) || c
== '.')
3350 case 'd': case 'i': case 'u':
3351 case 'x': case 'X': case 'o':
3355 fprintf (file
, buf
, va_arg (argptr
, int));
3359 /* This is a prefix to the 'd', 'i', 'u', 'x', 'X', and
3360 'o' cases, but we do not check for those cases. It
3361 means that the value is a HOST_WIDE_INT, which may be
3362 either `long' or `long long'. */
3363 memcpy (q
, HOST_WIDE_INT_PRINT
, strlen (HOST_WIDE_INT_PRINT
));
3364 q
+= strlen (HOST_WIDE_INT_PRINT
);
3367 fprintf (file
, buf
, va_arg (argptr
, HOST_WIDE_INT
));
3372 #ifdef HAVE_LONG_LONG
3378 fprintf (file
, buf
, va_arg (argptr
, long long));
3385 fprintf (file
, buf
, va_arg (argptr
, long));
3393 fprintf (file
, buf
, va_arg (argptr
, char *));
3397 #ifdef ASM_OUTPUT_OPCODE
3398 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3403 #ifdef REGISTER_PREFIX
3404 fprintf (file
, "%s", REGISTER_PREFIX
);
3409 #ifdef IMMEDIATE_PREFIX
3410 fprintf (file
, "%s", IMMEDIATE_PREFIX
);
3415 #ifdef LOCAL_LABEL_PREFIX
3416 fprintf (file
, "%s", LOCAL_LABEL_PREFIX
);
3421 fputs (user_label_prefix
, file
);
3424 #ifdef ASM_FPRINTF_EXTENSIONS
3425 /* Uppercase letters are reserved for general use by asm_fprintf
3426 and so are not available to target specific code. In order to
3427 prevent the ASM_FPRINTF_EXTENSIONS macro from using them then,
3428 they are defined here. As they get turned into real extensions
3429 to asm_fprintf they should be removed from this list. */
3430 case 'A': case 'B': case 'C': case 'D': case 'E':
3431 case 'F': case 'G': case 'H': case 'J': case 'K':
3432 case 'M': case 'N': case 'P': case 'Q': case 'S':
3433 case 'T': case 'V': case 'W': case 'Y': case 'Z':
3436 ASM_FPRINTF_EXTENSIONS (file
, argptr
, p
)
3449 /* Split up a CONST_DOUBLE or integer constant rtx
3450 into two rtx's for single words,
3451 storing in *FIRST the word that comes first in memory in the target
3452 and in *SECOND the other. */
3455 split_double (rtx value
, rtx
*first
, rtx
*second
)
3457 if (GET_CODE (value
) == CONST_INT
)
3459 if (HOST_BITS_PER_WIDE_INT
>= (2 * BITS_PER_WORD
))
3461 /* In this case the CONST_INT holds both target words.
3462 Extract the bits from it into two word-sized pieces.
3463 Sign extend each half to HOST_WIDE_INT. */
3464 unsigned HOST_WIDE_INT low
, high
;
3465 unsigned HOST_WIDE_INT mask
, sign_bit
, sign_extend
;
3467 /* Set sign_bit to the most significant bit of a word. */
3469 sign_bit
<<= BITS_PER_WORD
- 1;
3471 /* Set mask so that all bits of the word are set. We could
3472 have used 1 << BITS_PER_WORD instead of basing the
3473 calculation on sign_bit. However, on machines where
3474 HOST_BITS_PER_WIDE_INT == BITS_PER_WORD, it could cause a
3475 compiler warning, even though the code would never be
3477 mask
= sign_bit
<< 1;
3480 /* Set sign_extend as any remaining bits. */
3481 sign_extend
= ~mask
;
3483 /* Pick the lower word and sign-extend it. */
3484 low
= INTVAL (value
);
3489 /* Pick the higher word, shifted to the least significant
3490 bits, and sign-extend it. */
3491 high
= INTVAL (value
);
3492 high
>>= BITS_PER_WORD
- 1;
3495 if (high
& sign_bit
)
3496 high
|= sign_extend
;
3498 /* Store the words in the target machine order. */
3499 if (WORDS_BIG_ENDIAN
)
3501 *first
= GEN_INT (high
);
3502 *second
= GEN_INT (low
);
3506 *first
= GEN_INT (low
);
3507 *second
= GEN_INT (high
);
3512 /* The rule for using CONST_INT for a wider mode
3513 is that we regard the value as signed.
3514 So sign-extend it. */
3515 rtx high
= (INTVAL (value
) < 0 ? constm1_rtx
: const0_rtx
);
3516 if (WORDS_BIG_ENDIAN
)
3528 else if (GET_CODE (value
) != CONST_DOUBLE
)
3530 if (WORDS_BIG_ENDIAN
)
3532 *first
= const0_rtx
;
3538 *second
= const0_rtx
;
3541 else if (GET_MODE (value
) == VOIDmode
3542 /* This is the old way we did CONST_DOUBLE integers. */
3543 || GET_MODE_CLASS (GET_MODE (value
)) == MODE_INT
)
3545 /* In an integer, the words are defined as most and least significant.
3546 So order them by the target's convention. */
3547 if (WORDS_BIG_ENDIAN
)
3549 *first
= GEN_INT (CONST_DOUBLE_HIGH (value
));
3550 *second
= GEN_INT (CONST_DOUBLE_LOW (value
));
3554 *first
= GEN_INT (CONST_DOUBLE_LOW (value
));
3555 *second
= GEN_INT (CONST_DOUBLE_HIGH (value
));
3562 REAL_VALUE_FROM_CONST_DOUBLE (r
, value
);
3564 /* Note, this converts the REAL_VALUE_TYPE to the target's
3565 format, splits up the floating point double and outputs
3566 exactly 32 bits of it into each of l[0] and l[1] --
3567 not necessarily BITS_PER_WORD bits. */
3568 REAL_VALUE_TO_TARGET_DOUBLE (r
, l
);
3570 /* If 32 bits is an entire word for the target, but not for the host,
3571 then sign-extend on the host so that the number will look the same
3572 way on the host that it would on the target. See for instance
3573 simplify_unary_operation. The #if is needed to avoid compiler
3576 #if HOST_BITS_PER_LONG > 32
3577 if (BITS_PER_WORD
< HOST_BITS_PER_LONG
&& BITS_PER_WORD
== 32)
3579 if (l
[0] & ((long) 1 << 31))
3580 l
[0] |= ((long) (-1) << 32);
3581 if (l
[1] & ((long) 1 << 31))
3582 l
[1] |= ((long) (-1) << 32);
3586 *first
= GEN_INT ((HOST_WIDE_INT
) l
[0]);
3587 *second
= GEN_INT ((HOST_WIDE_INT
) l
[1]);
3591 /* Return nonzero if this function has no function calls. */
3594 leaf_function_p (void)
3599 if (current_function_profile
|| profile_arc_flag
)
3602 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
3604 if (GET_CODE (insn
) == CALL_INSN
3605 && ! SIBLING_CALL_P (insn
))
3607 if (GET_CODE (insn
) == INSN
3608 && GET_CODE (PATTERN (insn
)) == SEQUENCE
3609 && GET_CODE (XVECEXP (PATTERN (insn
), 0, 0)) == CALL_INSN
3610 && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn
), 0, 0)))
3613 for (link
= current_function_epilogue_delay_list
;
3615 link
= XEXP (link
, 1))
3617 insn
= XEXP (link
, 0);
3619 if (GET_CODE (insn
) == CALL_INSN
3620 && ! SIBLING_CALL_P (insn
))
3622 if (GET_CODE (insn
) == INSN
3623 && GET_CODE (PATTERN (insn
)) == SEQUENCE
3624 && GET_CODE (XVECEXP (PATTERN (insn
), 0, 0)) == CALL_INSN
3625 && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn
), 0, 0)))
3632 /* Return 1 if branch is a forward branch.
3633 Uses insn_shuid array, so it works only in the final pass. May be used by
3634 output templates to customary add branch prediction hints.
3637 final_forward_branch_p (rtx insn
)
3639 int insn_id
, label_id
;
3642 insn_id
= INSN_SHUID (insn
);
3643 label_id
= INSN_SHUID (JUMP_LABEL (insn
));
3644 /* We've hit some insns that does not have id information available. */
3645 if (!insn_id
|| !label_id
)
3647 return insn_id
< label_id
;
3650 /* On some machines, a function with no call insns
3651 can run faster if it doesn't create its own register window.
3652 When output, the leaf function should use only the "output"
3653 registers. Ordinarily, the function would be compiled to use
3654 the "input" registers to find its arguments; it is a candidate
3655 for leaf treatment if it uses only the "input" registers.
3656 Leaf function treatment means renumbering so the function
3657 uses the "output" registers instead. */
3659 #ifdef LEAF_REGISTERS
3661 /* Return 1 if this function uses only the registers that can be
3662 safely renumbered. */
3665 only_leaf_regs_used (void)
3668 const char *const permitted_reg_in_leaf_functions
= LEAF_REGISTERS
;
3670 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
3671 if ((regs_ever_live
[i
] || global_regs
[i
])
3672 && ! permitted_reg_in_leaf_functions
[i
])
3675 if (current_function_uses_pic_offset_table
3676 && pic_offset_table_rtx
!= 0
3677 && GET_CODE (pic_offset_table_rtx
) == REG
3678 && ! permitted_reg_in_leaf_functions
[REGNO (pic_offset_table_rtx
)])
3684 /* Scan all instructions and renumber all registers into those
3685 available in leaf functions. */
3688 leaf_renumber_regs (rtx first
)
3692 /* Renumber only the actual patterns.
3693 The reg-notes can contain frame pointer refs,
3694 and renumbering them could crash, and should not be needed. */
3695 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
3697 leaf_renumber_regs_insn (PATTERN (insn
));
3698 for (insn
= current_function_epilogue_delay_list
;
3700 insn
= XEXP (insn
, 1))
3701 if (INSN_P (XEXP (insn
, 0)))
3702 leaf_renumber_regs_insn (PATTERN (XEXP (insn
, 0)));
3705 /* Scan IN_RTX and its subexpressions, and renumber all regs into those
3706 available in leaf functions. */
3709 leaf_renumber_regs_insn (rtx in_rtx
)
3712 const char *format_ptr
;
3717 /* Renumber all input-registers into output-registers.
3718 renumbered_regs would be 1 for an output-register;
3721 if (GET_CODE (in_rtx
) == REG
)
3725 /* Don't renumber the same reg twice. */
3729 newreg
= REGNO (in_rtx
);
3730 /* Don't try to renumber pseudo regs. It is possible for a pseudo reg
3731 to reach here as part of a REG_NOTE. */
3732 if (newreg
>= FIRST_PSEUDO_REGISTER
)
3737 newreg
= LEAF_REG_REMAP (newreg
);
3740 regs_ever_live
[REGNO (in_rtx
)] = 0;
3741 regs_ever_live
[newreg
] = 1;
3742 REGNO (in_rtx
) = newreg
;
3746 if (INSN_P (in_rtx
))
3748 /* Inside a SEQUENCE, we find insns.
3749 Renumber just the patterns of these insns,
3750 just as we do for the top-level insns. */
3751 leaf_renumber_regs_insn (PATTERN (in_rtx
));
3755 format_ptr
= GET_RTX_FORMAT (GET_CODE (in_rtx
));
3757 for (i
= 0; i
< GET_RTX_LENGTH (GET_CODE (in_rtx
)); i
++)
3758 switch (*format_ptr
++)
3761 leaf_renumber_regs_insn (XEXP (in_rtx
, i
));
3765 if (NULL
!= XVEC (in_rtx
, i
))
3767 for (j
= 0; j
< XVECLEN (in_rtx
, i
); j
++)
3768 leaf_renumber_regs_insn (XVECEXP (in_rtx
, i
, j
));
3788 /* When -gused is used, emit debug info for only used symbols. But in
3789 addition to the standard intercepted debug_hooks there are some direct
3790 calls into this file, i.e., dbxout_symbol, dbxout_parms, and dbxout_reg_params.
3791 Those routines may also be called from a higher level intercepted routine. So
3792 to prevent recording data for an inner call to one of these for an intercept,
3793 we maintain a intercept nesting counter (debug_nesting). We only save the
3794 intercepted arguments if the nesting is 1. */
3795 int debug_nesting
= 0;
3797 static tree
*symbol_queue
;
3798 int symbol_queue_index
= 0;
3799 static int symbol_queue_size
= 0;
3801 /* Generate the symbols for any queued up type symbols we encountered
3802 while generating the type info for some originally used symbol.
3803 This might generate additional entries in the queue. Only when
3804 the nesting depth goes to 0 is this routine called. */
3807 debug_flush_symbol_queue (void)
3811 /* Make sure that additionally queued items are not flushed
3816 for (i
= 0; i
< symbol_queue_index
; ++i
)
3818 /* If we pushed queued symbols then such symbols are must be
3819 output no matter what anyone else says. Specifically,
3820 we need to make sure dbxout_symbol() thinks the symbol was
3821 used and also we need to override TYPE_DECL_SUPPRESS_DEBUG
3822 which may be set for outside reasons. */
3823 int saved_tree_used
= TREE_USED (symbol_queue
[i
]);
3824 int saved_suppress_debug
= TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]);
3825 TREE_USED (symbol_queue
[i
]) = 1;
3826 TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]) = 0;
3828 #ifdef DBX_DEBUGGING_INFO
3829 dbxout_symbol (symbol_queue
[i
], 0);
3832 TREE_USED (symbol_queue
[i
]) = saved_tree_used
;
3833 TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]) = saved_suppress_debug
;
3836 symbol_queue_index
= 0;
3840 /* Queue a type symbol needed as part of the definition of a decl
3841 symbol. These symbols are generated when debug_flush_symbol_queue()
3845 debug_queue_symbol (tree decl
)
3847 if (symbol_queue_index
>= symbol_queue_size
)
3849 symbol_queue_size
+= 10;
3850 symbol_queue
= xrealloc (symbol_queue
,
3851 symbol_queue_size
* sizeof (tree
));
3854 symbol_queue
[symbol_queue_index
++] = decl
;
3857 /* Free symbol queue. */
3859 debug_free_queue (void)
3863 free (symbol_queue
);
3864 symbol_queue
= NULL
;
3865 symbol_queue_size
= 0;