1 /* This file contains the definitions and documentation for the
2 Register Transfer Expressions (rtx's) that make up the
3 Register Transfer Language (rtl) used in the Back End of the GNU compiler.
4 Copyright (C) 1987, 1988, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2004
5 Free Software Foundation, Inc.
7 This file is part of GCC.
9 GCC is free software; you can redistribute it and/or modify it under
10 the terms of the GNU General Public License as published by the Free
11 Software Foundation; either version 2, or (at your option) any later
14 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
15 WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
19 You should have received a copy of the GNU General Public License
20 along with GCC; see the file COPYING. If not, write to the Free
21 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
25 /* Expression definitions and descriptions for all targets are in this file.
26 Some will not be used for some targets.
28 The fields in the cpp macro call "DEF_RTL_EXPR()"
29 are used to create declarations in the C source of the compiler.
33 1. The internal name of the rtx used in the C source.
34 It is a tag in the enumeration "enum rtx_code" defined in "rtl.h".
35 By convention these are in UPPER_CASE.
37 2. The name of the rtx in the external ASCII format read by
38 read_rtx(), and printed by print_rtx().
39 These names are stored in rtx_name[].
40 By convention these are the internal (field 1) names in lower_case.
42 3. The print format, and type of each rtx->u.fld[] (field) in this rtx.
43 These formats are stored in rtx_format[].
44 The meaning of the formats is documented in front of this array in rtl.c
46 4. The class of the rtx. These are stored in rtx_class and are accessed
47 via the GET_RTX_CLASS macro. They are defined as follows:
50 an rtx code that can be used to represent a constant object
53 an rtx code that can be used to represent an object (e.g, REG, MEM)
55 an rtx code for a comparison (e.g, LT, GT)
57 an rtx code for a commutative comparison (e.g, EQ, NE, ORDERED)
59 an rtx code for a unary arithmetic expression (e.g, NEG, NOT)
61 an rtx code for a commutative binary operation (e.g,, PLUS, MULT)
63 an rtx code for a non-bitfield three input operation (IF_THEN_ELSE)
65 an rtx code for a non-commutative binary operation (e.g., MINUS, DIV)
67 an rtx code for a bit-field operation (ZERO_EXTRACT, SIGN_EXTRACT)
69 an rtx code for a machine insn (INSN, JUMP_INSN, CALL_INSN)
71 an rtx code for something that matches in insns (e.g, MATCH_DUP)
73 an rtx code for autoincrement addressing modes (e.g. POST_DEC)
79 /* ---------------------------------------------------------------------
80 Expressions (and "meta" expressions) used for structuring the
81 rtl representation of a program.
82 --------------------------------------------------------------------- */
84 /* an expression code name unknown to the reader */
85 DEF_RTL_EXPR(UNKNOWN, "UnKnown", "*", RTX_EXTRA)
87 /* (NIL) is used by rtl reader and printer to represent a null pointer. */
89 DEF_RTL_EXPR(NIL, "nil", "*", RTX_EXTRA)
94 DEF_RTL_EXPR(INCLUDE, "include", "s", RTX_EXTRA)
96 /* ---------------------------------------------------------------------
97 Expressions used in constructing lists.
98 --------------------------------------------------------------------- */
100 /* a linked list of expressions */
101 DEF_RTL_EXPR(EXPR_LIST, "expr_list", "ee", RTX_EXTRA)
103 /* a linked list of instructions.
104 The insns are represented in print by their uids. */
105 DEF_RTL_EXPR(INSN_LIST, "insn_list", "ue", RTX_EXTRA)
107 /* ----------------------------------------------------------------------
108 Expression types for machine descriptions.
109 These do not appear in actual rtl code in the compiler.
110 ---------------------------------------------------------------------- */
112 /* Appears only in machine descriptions.
113 Means use the function named by the second arg (the string)
114 as a predicate; if matched, store the structure that was matched
115 in the operand table at index specified by the first arg (the integer).
116 If the second arg is the null string, the structure is just stored.
118 A third string argument indicates to the register allocator restrictions
119 on where the operand can be allocated.
121 If the target needs no restriction on any instruction this field should
124 The string is prepended by:
125 '=' to indicate the operand is only written to.
126 '+' to indicate the operand is both read and written to.
128 Each character in the string represents an allocable class for an operand.
129 'g' indicates the operand can be any valid class.
130 'i' indicates the operand can be immediate (in the instruction) data.
131 'r' indicates the operand can be in a register.
132 'm' indicates the operand can be in memory.
133 'o' a subset of the 'm' class. Those memory addressing modes that
134 can be offset at compile time (have a constant added to them).
136 Other characters indicate target dependent operand classes and
137 are described in each target's machine description.
139 For instructions with more than one operand, sets of classes can be
140 separated by a comma to indicate the appropriate multi-operand constraints.
141 There must be a 1 to 1 correspondence between these sets of classes in
142 all operands for an instruction.
144 DEF_RTL_EXPR(MATCH_OPERAND, "match_operand", "iss", RTX_MATCH)
146 /* Appears only in machine descriptions.
147 Means match a SCRATCH or a register. When used to generate rtl, a
148 SCRATCH is generated. As for MATCH_OPERAND, the mode specifies
149 the desired mode and the first argument is the operand number.
150 The second argument is the constraint. */
151 DEF_RTL_EXPR(MATCH_SCRATCH, "match_scratch", "is", RTX_MATCH)
153 /* Appears only in machine descriptions.
154 Means match only something equal to what is stored in the operand table
155 at the index specified by the argument. */
156 DEF_RTL_EXPR(MATCH_DUP, "match_dup", "i", RTX_MATCH)
158 /* Appears only in machine descriptions.
159 Means apply a predicate, AND match recursively the operands of the rtx.
160 Operand 0 is the operand-number, as in match_operand.
161 Operand 1 is a predicate to apply (as a string, a function name).
162 Operand 2 is a vector of expressions, each of which must match
163 one subexpression of the rtx this construct is matching. */
164 DEF_RTL_EXPR(MATCH_OPERATOR, "match_operator", "isE", RTX_MATCH)
166 /* Appears only in machine descriptions.
167 Means to match a PARALLEL of arbitrary length. The predicate is applied
168 to the PARALLEL and the initial expressions in the PARALLEL are matched.
169 Operand 0 is the operand-number, as in match_operand.
170 Operand 1 is a predicate to apply to the PARALLEL.
171 Operand 2 is a vector of expressions, each of which must match the
172 corresponding element in the PARALLEL. */
173 DEF_RTL_EXPR(MATCH_PARALLEL, "match_parallel", "isE", RTX_MATCH)
175 /* Appears only in machine descriptions.
176 Means match only something equal to what is stored in the operand table
177 at the index specified by the argument. For MATCH_OPERATOR. */
178 DEF_RTL_EXPR(MATCH_OP_DUP, "match_op_dup", "iE", RTX_MATCH)
180 /* Appears only in machine descriptions.
181 Means match only something equal to what is stored in the operand table
182 at the index specified by the argument. For MATCH_PARALLEL. */
183 DEF_RTL_EXPR(MATCH_PAR_DUP, "match_par_dup", "iE", RTX_MATCH)
185 /* Appears only in machine descriptions.
186 Defines the pattern for one kind of instruction.
188 0: names this instruction.
189 If the name is the null string, the instruction is in the
190 machine description just to be recognized, and will never be emitted by
191 the tree to rtl expander.
193 2: is a string which is a C expression
194 giving an additional condition for recognizing this pattern.
195 A null string means no extra condition.
196 3: is the action to execute if this pattern is matched.
197 If this assembler code template starts with a * then it is a fragment of
198 C code to run to decide on a template to use. Otherwise, it is the
200 4: optionally, a vector of attributes for this insn.
202 DEF_RTL_EXPR(DEFINE_INSN, "define_insn", "sEsTV", RTX_EXTRA)
204 /* Definition of a peephole optimization.
205 1st operand: vector of insn patterns to match
206 2nd operand: C expression that must be true
207 3rd operand: template or C code to produce assembler output.
208 4: optionally, a vector of attributes for this insn.
210 DEF_RTL_EXPR(DEFINE_PEEPHOLE, "define_peephole", "EsTV", RTX_EXTRA)
212 /* Definition of a split operation.
213 1st operand: insn pattern to match
214 2nd operand: C expression that must be true
215 3rd operand: vector of insn patterns to place into a SEQUENCE
216 4th operand: optionally, some C code to execute before generating the
217 insns. This might, for example, create some RTX's and store them in
218 elements of `recog_data.operand' for use by the vector of
220 (`operands' is an alias here for `recog_data.operand'). */
221 DEF_RTL_EXPR(DEFINE_SPLIT, "define_split", "EsES", RTX_EXTRA)
223 /* Definition of an insn and associated split.
224 This is the concatenation, with a few modifications, of a define_insn
225 and a define_split which share the same pattern.
227 0: names this instruction.
228 If the name is the null string, the instruction is in the
229 machine description just to be recognized, and will never be emitted by
230 the tree to rtl expander.
232 2: is a string which is a C expression
233 giving an additional condition for recognizing this pattern.
234 A null string means no extra condition.
235 3: is the action to execute if this pattern is matched.
236 If this assembler code template starts with a * then it is a fragment of
237 C code to run to decide on a template to use. Otherwise, it is the
239 4: C expression that must be true for split. This may start with "&&"
240 in which case the split condition is the logical and of the insn
241 condition and what follows the "&&" of this operand.
242 5: vector of insn patterns to place into a SEQUENCE
243 6: optionally, some C code to execute before generating the
244 insns. This might, for example, create some RTX's and store them in
245 elements of `recog_data.operand' for use by the vector of
247 (`operands' is an alias here for `recog_data.operand').
248 7: optionally, a vector of attributes for this insn. */
249 DEF_RTL_EXPR(DEFINE_INSN_AND_SPLIT, "define_insn_and_split", "sEsTsESV", RTX_EXTRA)
251 /* Definition of an RTL peephole operation.
252 Follows the same arguments as define_split. */
253 DEF_RTL_EXPR(DEFINE_PEEPHOLE2, "define_peephole2", "EsES", RTX_EXTRA)
255 /* Define how to generate multiple insns for a standard insn name.
256 1st operand: the insn name.
257 2nd operand: vector of insn-patterns.
258 Use match_operand to substitute an element of `recog_data.operand'.
259 3rd operand: C expression that must be true for this to be available.
260 This may not test any operands.
261 4th operand: Extra C code to execute before generating the insns.
262 This might, for example, create some RTX's and store them in
263 elements of `recog_data.operand' for use by the vector of
265 (`operands' is an alias here for `recog_data.operand'). */
266 DEF_RTL_EXPR(DEFINE_EXPAND, "define_expand", "sEss", RTX_EXTRA)
268 /* Define a requirement for delay slots.
269 1st operand: Condition involving insn attributes that, if true,
270 indicates that the insn requires the number of delay slots
272 2nd operand: Vector whose length is the three times the number of delay
274 Each entry gives three conditions, each involving attributes.
275 The first must be true for an insn to occupy that delay slot
276 location. The second is true for all insns that can be
277 annulled if the branch is true and the third is true for all
278 insns that can be annulled if the branch is false.
280 Multiple DEFINE_DELAYs may be present. They indicate differing
281 requirements for delay slots. */
282 DEF_RTL_EXPR(DEFINE_DELAY, "define_delay", "eE", RTX_EXTRA)
284 /* Define a set of insns that requires a function unit. This means that
285 these insns produce their result after a delay and that there may be
286 restrictions on the number of insns of this type that can be scheduled
289 More than one DEFINE_FUNCTION_UNIT can be specified for a function unit.
290 Each gives a set of operations and associated delays. The first three
291 operands must be the same for each operation for the same function unit.
293 All delays are specified in cycles.
295 1st operand: Name of function unit (mostly for documentation)
296 2nd operand: Number of identical function units in CPU
297 3rd operand: Total number of simultaneous insns that can execute on this
298 function unit; 0 if unlimited.
299 4th operand: Condition involving insn attribute, that, if true, specifies
300 those insns that this expression applies to.
301 5th operand: Constant delay after which insn result will be
303 6th operand: Delay until next insn can be scheduled on the function unit
304 executing this operation. The meaning depends on whether or
305 not the next operand is supplied.
306 7th operand: If this operand is not specified, the 6th operand gives the
307 number of cycles after the instruction matching the 4th
308 operand begins using the function unit until a subsequent
309 insn can begin. A value of zero should be used for a
310 unit with no issue constraints. If only one operation can
311 be executed a time and the unit is busy for the entire time,
312 the 3rd operand should be specified as 1, the 6th operand
313 should be specified as 0, and the 7th operand should not
316 If this operand is specified, it is a list of attribute
317 expressions. If an insn for which any of these expressions
318 is true is currently executing on the function unit, the
319 issue delay will be given by the 6th operand. Otherwise,
320 the insn can be immediately scheduled (subject to the limit
321 on the number of simultaneous operations executing on the
323 DEF_RTL_EXPR(DEFINE_FUNCTION_UNIT, "define_function_unit", "siieiiV", RTX_EXTRA)
325 /* Define attribute computation for `asm' instructions. */
326 DEF_RTL_EXPR(DEFINE_ASM_ATTRIBUTES, "define_asm_attributes", "V", RTX_EXTRA)
328 /* Definition of a conditional execution meta operation. Automatically
329 generates new instances of DEFINE_INSN, selected by having attribute
330 "predicable" true. The new pattern will contain a COND_EXEC and the
331 predicate at top-level.
334 0: The predicate pattern. The top-level form should match a
335 relational operator. Operands should have only one alternative.
336 1: A C expression giving an additional condition for recognizing
337 the generated pattern.
338 2: A template or C code to produce assembler output. */
339 DEF_RTL_EXPR(DEFINE_COND_EXEC, "define_cond_exec", "Ess", RTX_EXTRA)
341 /* SEQUENCE appears in the result of a `gen_...' function
342 for a DEFINE_EXPAND that wants to make several insns.
343 Its elements are the bodies of the insns that should be made.
344 `emit_insn' takes the SEQUENCE apart and makes separate insns. */
345 DEF_RTL_EXPR(SEQUENCE, "sequence", "E", RTX_EXTRA)
347 /* Refers to the address of its argument. This is only used in alias.c. */
348 DEF_RTL_EXPR(ADDRESS, "address", "e", RTX_MATCH)
350 /* ----------------------------------------------------------------------
351 Constructions for CPU pipeline description described by NDFAs.
352 These do not appear in actual rtl code in the compiler.
353 ---------------------------------------------------------------------- */
355 /* (define_cpu_unit string [string]) describes cpu functional
356 units (separated by comma).
358 1st operand: Names of cpu functional units.
359 2nd operand: Name of automaton (see comments for DEFINE_AUTOMATON).
361 All define_reservations, define_cpu_units, and
362 define_query_cpu_units should have unique names which may not be
364 DEF_RTL_EXPR(DEFINE_CPU_UNIT, "define_cpu_unit", "sS", RTX_EXTRA)
366 /* (define_query_cpu_unit string [string]) describes cpu functional
367 units analogously to define_cpu_unit. The reservation of such
368 units can be queried for automaton state. */
369 DEF_RTL_EXPR(DEFINE_QUERY_CPU_UNIT, "define_query_cpu_unit", "sS", RTX_EXTRA)
371 /* (exclusion_set string string) means that each CPU functional unit
372 in the first string can not be reserved simultaneously with any
373 unit whose name is in the second string and vise versa. CPU units
374 in the string are separated by commas. For example, it is useful
375 for description CPU with fully pipelined floating point functional
376 unit which can execute simultaneously only single floating point
377 insns or only double floating point insns. All CPU functional
378 units in a set should belong to the same automaton. */
379 DEF_RTL_EXPR(EXCLUSION_SET, "exclusion_set", "ss", RTX_EXTRA)
381 /* (presence_set string string) means that each CPU functional unit in
382 the first string can not be reserved unless at least one of pattern
383 of units whose names are in the second string is reserved. This is
384 an asymmetric relation. CPU units or unit patterns in the strings
385 are separated by commas. Pattern is one unit name or unit names
386 separated by white-spaces.
388 For example, it is useful for description that slot1 is reserved
389 after slot0 reservation for a VLIW processor. We could describe it
390 by the following construction
392 (presence_set "slot1" "slot0")
394 Or slot1 is reserved only after slot0 and unit b0 reservation. In
395 this case we could write
397 (presence_set "slot1" "slot0 b0")
399 All CPU functional units in a set should belong to the same
401 DEF_RTL_EXPR(PRESENCE_SET, "presence_set", "ss", RTX_EXTRA)
403 /* (final_presence_set string string) is analogous to `presence_set'.
404 The difference between them is when checking is done. When an
405 instruction is issued in given automaton state reflecting all
406 current and planned unit reservations, the automaton state is
407 changed. The first state is a source state, the second one is a
408 result state. Checking for `presence_set' is done on the source
409 state reservation, checking for `final_presence_set' is done on the
410 result reservation. This construction is useful to describe a
411 reservation which is actually two subsequent reservations. For
414 (presence_set "slot1" "slot0")
416 the following insn will be never issued (because slot1 requires
417 slot0 which is absent in the source state).
419 (define_reservation "insn_and_nop" "slot0 + slot1")
421 but it can be issued if we use analogous `final_presence_set'. */
422 DEF_RTL_EXPR(FINAL_PRESENCE_SET, "final_presence_set", "ss", RTX_EXTRA)
424 /* (absence_set string string) means that each CPU functional unit in
425 the first string can be reserved only if each pattern of units
426 whose names are in the second string is not reserved. This is an
427 asymmetric relation (actually exclusion set is analogous to this
428 one but it is symmetric). CPU units or unit patterns in the string
429 are separated by commas. Pattern is one unit name or unit names
430 separated by white-spaces.
432 For example, it is useful for description that slot0 can not be
433 reserved after slot1 or slot2 reservation for a VLIW processor. We
434 could describe it by the following construction
436 (absence_set "slot2" "slot0, slot1")
438 Or slot2 can not be reserved if slot0 and unit b0 are reserved or
439 slot1 and unit b1 are reserved . In this case we could write
441 (absence_set "slot2" "slot0 b0, slot1 b1")
443 All CPU functional units in a set should to belong the same
445 DEF_RTL_EXPR(ABSENCE_SET, "absence_set", "ss", RTX_EXTRA)
447 /* (final_absence_set string string) is analogous to `absence_set' but
448 checking is done on the result (state) reservation. See comments
449 for `final_presence_set'. */
450 DEF_RTL_EXPR(FINAL_ABSENCE_SET, "final_absence_set", "ss", RTX_EXTRA)
452 /* (define_bypass number out_insn_names in_insn_names) names bypass
453 with given latency (the first number) from insns given by the first
454 string (see define_insn_reservation) into insns given by the second
455 string. Insn names in the strings are separated by commas. The
456 third operand is optional name of function which is additional
457 guard for the bypass. The function will get the two insns as
458 parameters. If the function returns zero the bypass will be
459 ignored for this case. Additional guard is necessary to recognize
460 complicated bypasses, e.g. when consumer is load address. */
461 DEF_RTL_EXPR(DEFINE_BYPASS, "define_bypass", "issS", RTX_EXTRA)
463 /* (define_automaton string) describes names of automata generated and
464 used for pipeline hazards recognition. The names are separated by
465 comma. Actually it is possibly to generate the single automaton
466 but unfortunately it can be very large. If we use more one
467 automata, the summary size of the automata usually is less than the
468 single one. The automaton name is used in define_cpu_unit and
469 define_query_cpu_unit. All automata should have unique names. */
470 DEF_RTL_EXPR(DEFINE_AUTOMATON, "define_automaton", "s", RTX_EXTRA)
472 /* (automata_option string) describes option for generation of
473 automata. Currently there are the following options:
475 o "no-minimization" which makes no minimization of automata. This
476 is only worth to do when we are debugging the description and
477 need to look more accurately at reservations of states.
479 o "time" which means printing additional time statistics about
480 generation of automata.
482 o "v" which means generation of file describing the result
483 automata. The file has suffix `.dfa' and can be used for the
484 description verification and debugging.
486 o "w" which means generation of warning instead of error for
489 o "ndfa" which makes nondeterministic finite state automata.
491 o "progress" which means output of a progress bar showing how many
492 states were generated so far for automaton being processed. */
493 DEF_RTL_EXPR(AUTOMATA_OPTION, "automata_option", "s", RTX_EXTRA)
495 /* (define_reservation string string) names reservation (the first
496 string) of cpu functional units (the 2nd string). Sometimes unit
497 reservations for different insns contain common parts. In such
498 case, you can describe common part and use its name (the 1st
499 parameter) in regular expression in define_insn_reservation. All
500 define_reservations, define_cpu_units, and define_query_cpu_units
501 should have unique names which may not be "nothing". */
502 DEF_RTL_EXPR(DEFINE_RESERVATION, "define_reservation", "ss", RTX_EXTRA)
504 /* (define_insn_reservation name default_latency condition regexpr)
505 describes reservation of cpu functional units (the 3nd operand) for
506 instruction which is selected by the condition (the 2nd parameter).
507 The first parameter is used for output of debugging information.
508 The reservations are described by a regular expression according
509 the following syntax:
511 regexp = regexp "," oneof
514 oneof = oneof "|" allof
517 allof = allof "+" repeat
520 repeat = element "*" number
523 element = cpu_function_unit_name
529 1. "," is used for describing start of the next cycle in
532 2. "|" is used for describing the reservation described by the
533 first regular expression *or* the reservation described by the
534 second regular expression *or* etc.
536 3. "+" is used for describing the reservation described by the
537 first regular expression *and* the reservation described by the
538 second regular expression *and* etc.
540 4. "*" is used for convenience and simply means sequence in
541 which the regular expression are repeated NUMBER times with
542 cycle advancing (see ",").
544 5. cpu functional unit name which means its reservation.
546 6. reservation name -- see define_reservation.
548 7. string "nothing" means no units reservation. */
550 DEF_RTL_EXPR(DEFINE_INSN_RESERVATION, "define_insn_reservation", "sies", RTX_EXTRA)
552 /* ----------------------------------------------------------------------
553 Expressions used for insn attributes. These also do not appear in
554 actual rtl code in the compiler.
555 ---------------------------------------------------------------------- */
557 /* Definition of an insn attribute.
558 1st operand: name of the attribute
559 2nd operand: comma-separated list of possible attribute values
560 3rd operand: expression for the default value of the attribute. */
561 DEF_RTL_EXPR(DEFINE_ATTR, "define_attr", "sse", RTX_EXTRA)
563 /* Marker for the name of an attribute. */
564 DEF_RTL_EXPR(ATTR, "attr", "s", RTX_EXTRA)
566 /* For use in the last (optional) operand of DEFINE_INSN or DEFINE_PEEPHOLE and
567 in DEFINE_ASM_INSN to specify an attribute to assign to insns matching that
570 (set_attr "name" "value") is equivalent to
571 (set (attr "name") (const_string "value")) */
572 DEF_RTL_EXPR(SET_ATTR, "set_attr", "ss", RTX_EXTRA)
574 /* In the last operand of DEFINE_INSN and DEFINE_PEEPHOLE, this can be used to
575 specify that attribute values are to be assigned according to the
578 The following three expressions are equivalent:
580 (set (attr "att") (cond [(eq_attrq "alternative" "1") (const_string "a1")
581 (eq_attrq "alternative" "2") (const_string "a2")]
582 (const_string "a3")))
583 (set_attr_alternative "att" [(const_string "a1") (const_string "a2")
584 (const_string "a3")])
585 (set_attr "att" "a1,a2,a3")
587 DEF_RTL_EXPR(SET_ATTR_ALTERNATIVE, "set_attr_alternative", "sE", RTX_EXTRA)
589 /* A conditional expression true if the value of the specified attribute of
590 the current insn equals the specified value. The first operand is the
591 attribute name and the second is the comparison value. */
592 DEF_RTL_EXPR(EQ_ATTR, "eq_attr", "ss", RTX_EXTRA)
594 /* A special case of the above representing a set of alternatives. The first
595 operand is bitmap of the set, the second one is the default value. */
596 DEF_RTL_EXPR(EQ_ATTR_ALT, "eq_attr_alt", "ii", RTX_EXTRA)
598 /* A conditional expression which is true if the specified flag is
599 true for the insn being scheduled in reorg.
601 genattr.c defines the following flags which can be tested by
602 (attr_flag "foo") expressions in eligible_for_delay.
604 forward, backward, very_likely, likely, very_unlikely, and unlikely. */
606 DEF_RTL_EXPR (ATTR_FLAG, "attr_flag", "s", RTX_EXTRA)
608 /* ----------------------------------------------------------------------
609 Expression types used for things in the instruction chain.
611 All formats must start with "iuu" to handle the chain.
612 Each insn expression holds an rtl instruction and its semantics
613 during back-end processing.
614 See macros's in "rtl.h" for the meaning of each rtx->u.fld[].
616 ---------------------------------------------------------------------- */
618 /* An instruction that cannot jump. */
619 DEF_RTL_EXPR(INSN, "insn", "iuuBieiee", RTX_INSN)
621 /* An instruction that can possibly jump.
622 Fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
623 DEF_RTL_EXPR(JUMP_INSN, "jump_insn", "iuuBieiee0", RTX_INSN)
625 /* An instruction that can possibly call a subroutine
626 but which will not change which instruction comes next
627 in the current function.
628 Field ( rtx->u.fld[9] ) is CALL_INSN_FUNCTION_USAGE.
629 All other fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
630 DEF_RTL_EXPR(CALL_INSN, "call_insn", "iuuBieieee", RTX_INSN)
632 /* A marker that indicates that control will not flow through. */
633 DEF_RTL_EXPR(BARRIER, "barrier", "iuu000000", RTX_EXTRA)
635 /* Holds a label that is followed by instructions.
637 4: is used in jump.c for the use-count of the label.
638 5: is used in flow.c to point to the chain of label_ref's to this label.
639 6: is a number that is unique in the entire compilation.
640 7: is the user-given name of the label, if any. */
641 DEF_RTL_EXPR(CODE_LABEL, "code_label", "iuuB00is", RTX_EXTRA)
643 #ifdef USE_MAPPED_LOCATION
644 /* Say where in the code a source line starts, for symbol table's sake.
646 4: unused if line number > 0, note-specific data otherwise.
647 5: line number if > 0, enum note_insn otherwise.
648 6: CODE_LABEL_NUMBER if line number == NOTE_INSN_DELETED_LABEL. */
650 /* Say where in the code a source line starts, for symbol table's sake.
652 4: filename, if line number > 0, note-specific data otherwise.
653 5: line number if > 0, enum note_insn otherwise.
654 6: unique number if line number == note_insn_deleted_label. */
656 DEF_RTL_EXPR(NOTE, "note", "iuuB0ni", RTX_EXTRA)
658 /* ----------------------------------------------------------------------
659 Top level constituents of INSN, JUMP_INSN and CALL_INSN.
660 ---------------------------------------------------------------------- */
662 /* Conditionally execute code.
663 Operand 0 is the condition that if true, the code is executed.
664 Operand 1 is the code to be executed (typically a SET).
666 Semantics are that there are no side effects if the condition
667 is false. This pattern is created automatically by the if_convert
668 pass run after reload or by target-specific splitters. */
669 DEF_RTL_EXPR(COND_EXEC, "cond_exec", "ee", RTX_EXTRA)
671 /* Several operations to be done in parallel (perhaps under COND_EXEC). */
672 DEF_RTL_EXPR(PARALLEL, "parallel", "E", RTX_EXTRA)
674 /* A string that is passed through to the assembler as input.
675 One can obviously pass comments through by using the
676 assembler comment syntax.
677 These occur in an insn all by themselves as the PATTERN.
678 They also appear inside an ASM_OPERANDS
679 as a convenient way to hold a string. */
680 DEF_RTL_EXPR(ASM_INPUT, "asm_input", "s", RTX_EXTRA)
682 #ifdef USE_MAPPED_LOCATION
683 /* An assembler instruction with operands.
684 1st operand is the instruction template.
685 2nd operand is the constraint for the output.
686 3rd operand is the number of the output this expression refers to.
687 When an insn stores more than one value, a separate ASM_OPERANDS
688 is made for each output; this integer distinguishes them.
689 4th is a vector of values of input operands.
690 5th is a vector of modes and constraints for the input operands.
691 Each element is an ASM_INPUT containing a constraint string
692 and whose mode indicates the mode of the input operand.
693 6th is the source line number. */
694 DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEi", RTX_EXTRA)
696 /* An assembler instruction with operands.
697 1st operand is the instruction template.
698 2nd operand is the constraint for the output.
699 3rd operand is the number of the output this expression refers to.
700 When an insn stores more than one value, a separate ASM_OPERANDS
701 is made for each output; this integer distinguishes them.
702 4th is a vector of values of input operands.
703 5th is a vector of modes and constraints for the input operands.
704 Each element is an ASM_INPUT containing a constraint string
705 and whose mode indicates the mode of the input operand.
706 6th is the name of the containing source file.
707 7th is the source line number. */
708 DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEsi", RTX_EXTRA)
711 /* A machine-specific operation.
712 1st operand is a vector of operands being used by the operation so that
713 any needed reloads can be done.
714 2nd operand is a unique value saying which of a number of machine-specific
715 operations is to be performed.
716 (Note that the vector must be the first operand because of the way that
717 genrecog.c record positions within an insn.)
718 This can occur all by itself in a PATTERN, as a component of a PARALLEL,
719 or inside an expression. */
720 DEF_RTL_EXPR(UNSPEC, "unspec", "Ei", RTX_EXTRA)
722 /* Similar, but a volatile operation and one which may trap. */
723 DEF_RTL_EXPR(UNSPEC_VOLATILE, "unspec_volatile", "Ei", RTX_EXTRA)
725 /* Vector of addresses, stored as full words. */
726 /* Each element is a LABEL_REF to a CODE_LABEL whose address we want. */
727 DEF_RTL_EXPR(ADDR_VEC, "addr_vec", "E", RTX_EXTRA)
729 /* Vector of address differences X0 - BASE, X1 - BASE, ...
730 First operand is BASE; the vector contains the X's.
731 The machine mode of this rtx says how much space to leave
732 for each difference and is adjusted by branch shortening if
733 CASE_VECTOR_SHORTEN_MODE is defined.
734 The third and fourth operands store the target labels with the
735 minimum and maximum addresses respectively.
736 The fifth operand stores flags for use by branch shortening.
737 Set at the start of shorten_branches:
738 min_align: the minimum alignment for any of the target labels.
739 base_after_vec: true iff BASE is after the ADDR_DIFF_VEC.
740 min_after_vec: true iff minimum addr target label is after the ADDR_DIFF_VEC.
741 max_after_vec: true iff maximum addr target label is after the ADDR_DIFF_VEC.
742 min_after_base: true iff minimum address target label is after BASE.
743 max_after_base: true iff maximum address target label is after BASE.
744 Set by the actual branch shortening process:
745 offset_unsigned: true iff offsets have to be treated as unsigned.
746 scale: scaling that is necessary to make offsets fit into the mode.
748 The third, fourth and fifth operands are only valid when
749 CASE_VECTOR_SHORTEN_MODE is defined, and only in an optimizing
752 DEF_RTL_EXPR(ADDR_DIFF_VEC, "addr_diff_vec", "eEee0", RTX_EXTRA)
754 /* Memory prefetch, with attributes supported on some targets.
755 Operand 1 is the address of the memory to fetch.
756 Operand 2 is 1 for a write access, 0 otherwise.
757 Operand 3 is the level of temporal locality; 0 means there is no
758 temporal locality and 1, 2, and 3 are for increasing levels of temporal
761 The attributes specified by operands 2 and 3 are ignored for targets
762 whose prefetch instructions do not support them. */
763 DEF_RTL_EXPR(PREFETCH, "prefetch", "eee", RTX_EXTRA)
765 /* ----------------------------------------------------------------------
766 At the top level of an instruction (perhaps under PARALLEL).
767 ---------------------------------------------------------------------- */
770 Operand 1 is the location (REG, MEM, PC, CC0 or whatever) assigned to.
771 Operand 2 is the value stored there.
772 ALL assignment must use SET.
773 Instructions that do multiple assignments must use multiple SET,
775 DEF_RTL_EXPR(SET, "set", "ee", RTX_EXTRA)
777 /* Indicate something is used in a way that we don't want to explain.
778 For example, subroutine calls will use the register
779 in which the static chain is passed. */
780 DEF_RTL_EXPR(USE, "use", "e", RTX_EXTRA)
782 /* Indicate something is clobbered in a way that we don't want to explain.
783 For example, subroutine calls will clobber some physical registers
784 (the ones that are by convention not saved). */
785 DEF_RTL_EXPR(CLOBBER, "clobber", "e", RTX_EXTRA)
787 /* Call a subroutine.
788 Operand 1 is the address to call.
789 Operand 2 is the number of arguments. */
791 DEF_RTL_EXPR(CALL, "call", "ee", RTX_EXTRA)
793 /* Return from a subroutine. */
795 DEF_RTL_EXPR(RETURN, "return", "", RTX_EXTRA)
798 Operand 1 is the condition.
799 Operand 2 is the trap code.
800 For an unconditional trap, make the condition (const_int 1). */
801 DEF_RTL_EXPR(TRAP_IF, "trap_if", "ee", RTX_EXTRA)
803 /* Placeholder for _Unwind_Resume before we know if a function call
804 or a branch is needed. Operand 1 is the exception region from
805 which control is flowing. */
806 DEF_RTL_EXPR(RESX, "resx", "i", RTX_EXTRA)
808 /* ----------------------------------------------------------------------
809 Primitive values for use in expressions.
810 ---------------------------------------------------------------------- */
812 /* numeric integer constant */
813 DEF_RTL_EXPR(CONST_INT, "const_int", "w", RTX_CONST_OBJ)
815 /* numeric floating point constant.
816 Operands hold the value. They are all 'w' and there may be from 2 to 6;
818 DEF_RTL_EXPR(CONST_DOUBLE, "const_double", CONST_DOUBLE_FORMAT, RTX_CONST_OBJ)
820 /* Describes a vector constant. */
821 DEF_RTL_EXPR(CONST_VECTOR, "const_vector", "E", RTX_EXTRA)
823 /* String constant. Used only for attributes right now. */
824 DEF_RTL_EXPR(CONST_STRING, "const_string", "s", RTX_OBJ)
826 /* This is used to encapsulate an expression whose value is constant
827 (such as the sum of a SYMBOL_REF and a CONST_INT) so that it will be
828 recognized as a constant operand rather than by arithmetic instructions. */
830 DEF_RTL_EXPR(CONST, "const", "e", RTX_CONST_OBJ)
832 /* program counter. Ordinary jumps are represented
833 by a SET whose first operand is (PC). */
834 DEF_RTL_EXPR(PC, "pc", "", RTX_OBJ)
836 /* Used in the cselib routines to describe a value. */
837 DEF_RTL_EXPR(VALUE, "value", "0", RTX_OBJ)
839 /* A register. The "operand" is the register number, accessed with
840 the REGNO macro. If this number is less than FIRST_PSEUDO_REGISTER
841 than a hardware register is being referred to. The second operand
842 holds the original register number - this will be different for a
843 pseudo register that got turned into a hard register.
844 This rtx needs to have as many (or more) fields as a MEM, since we
845 can change REG rtx's into MEMs during reload. */
846 DEF_RTL_EXPR(REG, "reg", "i00", RTX_OBJ)
848 /* A scratch register. This represents a register used only within a
849 single insn. It will be turned into a REG during register allocation
850 or reload unless the constraint indicates that the register won't be
851 needed, in which case it can remain a SCRATCH. This code is
852 marked as having one operand so it can be turned into a REG. */
853 DEF_RTL_EXPR(SCRATCH, "scratch", "0", RTX_OBJ)
855 /* One word of a multi-word value.
856 The first operand is the complete value; the second says which word.
857 The WORDS_BIG_ENDIAN flag controls whether word number 0
858 (as numbered in a SUBREG) is the most or least significant word.
860 This is also used to refer to a value in a different machine mode.
861 For example, it can be used to refer to a SImode value as if it were
862 Qimode, or vice versa. Then the word number is always 0. */
863 DEF_RTL_EXPR(SUBREG, "subreg", "ei", RTX_EXTRA)
865 /* This one-argument rtx is used for move instructions
866 that are guaranteed to alter only the low part of a destination.
867 Thus, (SET (SUBREG:HI (REG...)) (MEM:HI ...))
868 has an unspecified effect on the high part of REG,
869 but (SET (STRICT_LOW_PART (SUBREG:HI (REG...))) (MEM:HI ...))
870 is guaranteed to alter only the bits of REG that are in HImode.
872 The actual instruction used is probably the same in both cases,
873 but the register constraints may be tighter when STRICT_LOW_PART
876 DEF_RTL_EXPR(STRICT_LOW_PART, "strict_low_part", "e", RTX_EXTRA)
878 /* (CONCAT a b) represents the virtual concatenation of a and b
879 to make a value that has as many bits as a and b put together.
880 This is used for complex values. Normally it appears only
881 in DECL_RTLs and during RTL generation, but not in the insn chain. */
882 DEF_RTL_EXPR(CONCAT, "concat", "ee", RTX_OBJ)
884 /* A memory location; operand is the address. The second operand is the
885 alias set to which this MEM belongs. We use `0' instead of `w' for this
886 field so that the field need not be specified in machine descriptions. */
887 DEF_RTL_EXPR(MEM, "mem", "e0", RTX_OBJ)
889 /* Reference to an assembler label in the code for this function.
890 The operand is a CODE_LABEL found in the insn chain.
891 The unprinted fields 1 and 2 are used in flow.c for the
892 LABEL_NEXTREF and CONTAINING_INSN. */
893 DEF_RTL_EXPR(LABEL_REF, "label_ref", "u00", RTX_CONST_OBJ)
895 /* Reference to a named label:
896 Operand 0: label name
897 Operand 1: flags (see SYMBOL_FLAG_* in rtl.h)
898 Operand 2: tree from which this symbol is derived, or null.
899 This is either a DECL node, or some kind of constant. */
900 DEF_RTL_EXPR(SYMBOL_REF, "symbol_ref", "s00", RTX_CONST_OBJ)
902 /* The condition code register is represented, in our imagination,
903 as a register holding a value that can be compared to zero.
904 In fact, the machine has already compared them and recorded the
905 results; but instructions that look at the condition code
906 pretend to be looking at the entire value and comparing it. */
907 DEF_RTL_EXPR(CC0, "cc0", "", RTX_OBJ)
909 /* ----------------------------------------------------------------------
910 Expressions for operators in an rtl pattern
911 ---------------------------------------------------------------------- */
913 /* if_then_else. This is used in representing ordinary
914 conditional jump instructions.
919 DEF_RTL_EXPR(IF_THEN_ELSE, "if_then_else", "eee", RTX_TERNARY)
921 /* General conditional. The first operand is a vector composed of pairs of
922 expressions. The first element of each pair is evaluated, in turn.
923 The value of the conditional is the second expression of the first pair
924 whose first expression evaluates nonzero. If none of the expressions is
925 true, the second operand will be used as the value of the conditional.
927 This should be replaced with use of IF_THEN_ELSE. */
928 DEF_RTL_EXPR(COND, "cond", "Ee", RTX_EXTRA)
930 /* Comparison, produces a condition code result. */
931 DEF_RTL_EXPR(COMPARE, "compare", "ee", RTX_BIN_ARITH)
934 DEF_RTL_EXPR(PLUS, "plus", "ee", RTX_COMM_ARITH)
936 /* Operand 0 minus operand 1. */
937 DEF_RTL_EXPR(MINUS, "minus", "ee", RTX_BIN_ARITH)
939 /* Minus operand 0. */
940 DEF_RTL_EXPR(NEG, "neg", "e", RTX_UNARY)
942 DEF_RTL_EXPR(MULT, "mult", "ee", RTX_COMM_ARITH)
944 /* Operand 0 divided by operand 1. */
945 DEF_RTL_EXPR(DIV, "div", "ee", RTX_BIN_ARITH)
946 /* Remainder of operand 0 divided by operand 1. */
947 DEF_RTL_EXPR(MOD, "mod", "ee", RTX_BIN_ARITH)
949 /* Unsigned divide and remainder. */
950 DEF_RTL_EXPR(UDIV, "udiv", "ee", RTX_BIN_ARITH)
951 DEF_RTL_EXPR(UMOD, "umod", "ee", RTX_BIN_ARITH)
953 /* Bitwise operations. */
954 DEF_RTL_EXPR(AND, "and", "ee", RTX_COMM_ARITH)
956 DEF_RTL_EXPR(IOR, "ior", "ee", RTX_COMM_ARITH)
958 DEF_RTL_EXPR(XOR, "xor", "ee", RTX_COMM_ARITH)
960 DEF_RTL_EXPR(NOT, "not", "e", RTX_UNARY)
963 0: value to be shifted.
964 1: number of bits. */
965 DEF_RTL_EXPR(ASHIFT, "ashift", "ee", RTX_BIN_ARITH) /* shift left */
966 DEF_RTL_EXPR(ROTATE, "rotate", "ee", RTX_BIN_ARITH) /* rotate left */
967 DEF_RTL_EXPR(ASHIFTRT, "ashiftrt", "ee", RTX_BIN_ARITH) /* arithmetic shift right */
968 DEF_RTL_EXPR(LSHIFTRT, "lshiftrt", "ee", RTX_BIN_ARITH) /* logical shift right */
969 DEF_RTL_EXPR(ROTATERT, "rotatert", "ee", RTX_BIN_ARITH) /* rotate right */
971 /* Minimum and maximum values of two operands. We need both signed and
972 unsigned forms. (We cannot use MIN for SMIN because it conflicts
973 with a macro of the same name.) */
975 DEF_RTL_EXPR(SMIN, "smin", "ee", RTX_COMM_ARITH)
976 DEF_RTL_EXPR(SMAX, "smax", "ee", RTX_COMM_ARITH)
977 DEF_RTL_EXPR(UMIN, "umin", "ee", RTX_COMM_ARITH)
978 DEF_RTL_EXPR(UMAX, "umax", "ee", RTX_COMM_ARITH)
980 /* These unary operations are used to represent incrementation
981 and decrementation as they occur in memory addresses.
982 The amount of increment or decrement are not represented
983 because they can be understood from the machine-mode of the
984 containing MEM. These operations exist in only two cases:
985 1. pushes onto the stack.
986 2. created automatically by the life_analysis pass in flow.c. */
987 DEF_RTL_EXPR(PRE_DEC, "pre_dec", "e", RTX_AUTOINC)
988 DEF_RTL_EXPR(PRE_INC, "pre_inc", "e", RTX_AUTOINC)
989 DEF_RTL_EXPR(POST_DEC, "post_dec", "e", RTX_AUTOINC)
990 DEF_RTL_EXPR(POST_INC, "post_inc", "e", RTX_AUTOINC)
992 /* These binary operations are used to represent generic address
993 side-effects in memory addresses, except for simple incrementation
994 or decrementation which use the above operations. They are
995 created automatically by the life_analysis pass in flow.c.
996 The first operand is a REG which is used as the address.
997 The second operand is an expression that is assigned to the
998 register, either before (PRE_MODIFY) or after (POST_MODIFY)
999 evaluating the address.
1000 Currently, the compiler can only handle second operands of the
1001 form (plus (reg) (reg)) and (plus (reg) (const_int)), where
1002 the first operand of the PLUS has to be the same register as
1003 the first operand of the *_MODIFY. */
1004 DEF_RTL_EXPR(PRE_MODIFY, "pre_modify", "ee", RTX_AUTOINC)
1005 DEF_RTL_EXPR(POST_MODIFY, "post_modify", "ee", RTX_AUTOINC)
1007 /* Comparison operations. The ordered comparisons exist in two
1008 flavors, signed and unsigned. */
1009 DEF_RTL_EXPR(NE, "ne", "ee", RTX_COMM_COMPARE)
1010 DEF_RTL_EXPR(EQ, "eq", "ee", RTX_COMM_COMPARE)
1011 DEF_RTL_EXPR(GE, "ge", "ee", RTX_COMPARE)
1012 DEF_RTL_EXPR(GT, "gt", "ee", RTX_COMPARE)
1013 DEF_RTL_EXPR(LE, "le", "ee", RTX_COMPARE)
1014 DEF_RTL_EXPR(LT, "lt", "ee", RTX_COMPARE)
1015 DEF_RTL_EXPR(GEU, "geu", "ee", RTX_COMPARE)
1016 DEF_RTL_EXPR(GTU, "gtu", "ee", RTX_COMPARE)
1017 DEF_RTL_EXPR(LEU, "leu", "ee", RTX_COMPARE)
1018 DEF_RTL_EXPR(LTU, "ltu", "ee", RTX_COMPARE)
1020 /* Additional floating point unordered comparison flavors. */
1021 DEF_RTL_EXPR(UNORDERED, "unordered", "ee", RTX_COMM_COMPARE)
1022 DEF_RTL_EXPR(ORDERED, "ordered", "ee", RTX_COMM_COMPARE)
1024 /* These are equivalent to unordered or ... */
1025 DEF_RTL_EXPR(UNEQ, "uneq", "ee", RTX_COMM_COMPARE)
1026 DEF_RTL_EXPR(UNGE, "unge", "ee", RTX_COMPARE)
1027 DEF_RTL_EXPR(UNGT, "ungt", "ee", RTX_COMPARE)
1028 DEF_RTL_EXPR(UNLE, "unle", "ee", RTX_COMPARE)
1029 DEF_RTL_EXPR(UNLT, "unlt", "ee", RTX_COMPARE)
1031 /* This is an ordered NE, ie !UNEQ, ie false for NaN. */
1032 DEF_RTL_EXPR(LTGT, "ltgt", "ee", RTX_COMM_COMPARE)
1034 /* Represents the result of sign-extending the sole operand.
1035 The machine modes of the operand and of the SIGN_EXTEND expression
1036 determine how much sign-extension is going on. */
1037 DEF_RTL_EXPR(SIGN_EXTEND, "sign_extend", "e", RTX_UNARY)
1039 /* Similar for zero-extension (such as unsigned short to int). */
1040 DEF_RTL_EXPR(ZERO_EXTEND, "zero_extend", "e", RTX_UNARY)
1042 /* Similar but here the operand has a wider mode. */
1043 DEF_RTL_EXPR(TRUNCATE, "truncate", "e", RTX_UNARY)
1045 /* Similar for extending floating-point values (such as SFmode to DFmode). */
1046 DEF_RTL_EXPR(FLOAT_EXTEND, "float_extend", "e", RTX_UNARY)
1047 DEF_RTL_EXPR(FLOAT_TRUNCATE, "float_truncate", "e", RTX_UNARY)
1049 /* Conversion of fixed point operand to floating point value. */
1050 DEF_RTL_EXPR(FLOAT, "float", "e", RTX_UNARY)
1052 /* With fixed-point machine mode:
1053 Conversion of floating point operand to fixed point value.
1054 Value is defined only when the operand's value is an integer.
1055 With floating-point machine mode (and operand with same mode):
1056 Operand is rounded toward zero to produce an integer value
1057 represented in floating point. */
1058 DEF_RTL_EXPR(FIX, "fix", "e", RTX_UNARY)
1060 /* Conversion of unsigned fixed point operand to floating point value. */
1061 DEF_RTL_EXPR(UNSIGNED_FLOAT, "unsigned_float", "e", RTX_UNARY)
1063 /* With fixed-point machine mode:
1064 Conversion of floating point operand to *unsigned* fixed point value.
1065 Value is defined only when the operand's value is an integer. */
1066 DEF_RTL_EXPR(UNSIGNED_FIX, "unsigned_fix", "e", RTX_UNARY)
1068 /* Absolute value */
1069 DEF_RTL_EXPR(ABS, "abs", "e", RTX_UNARY)
1072 DEF_RTL_EXPR(SQRT, "sqrt", "e", RTX_UNARY)
1074 /* Find first bit that is set.
1075 Value is 1 + number of trailing zeros in the arg.,
1076 or 0 if arg is 0. */
1077 DEF_RTL_EXPR(FFS, "ffs", "e", RTX_UNARY)
1079 /* Count leading zeros. */
1080 DEF_RTL_EXPR(CLZ, "clz", "e", RTX_UNARY)
1082 /* Count trailing zeros. */
1083 DEF_RTL_EXPR(CTZ, "ctz", "e", RTX_UNARY)
1085 /* Population count (number of 1 bits). */
1086 DEF_RTL_EXPR(POPCOUNT, "popcount", "e", RTX_UNARY)
1088 /* Population parity (number of 1 bits modulo 2). */
1089 DEF_RTL_EXPR(PARITY, "parity", "e", RTX_UNARY)
1091 /* Reference to a signed bit-field of specified size and position.
1092 Operand 0 is the memory unit (usually SImode or QImode) which
1093 contains the field's first bit. Operand 1 is the width, in bits.
1094 Operand 2 is the number of bits in the memory unit before the
1095 first bit of this field.
1096 If BITS_BIG_ENDIAN is defined, the first bit is the msb and
1097 operand 2 counts from the msb of the memory unit.
1098 Otherwise, the first bit is the lsb and operand 2 counts from
1099 the lsb of the memory unit. */
1100 DEF_RTL_EXPR(SIGN_EXTRACT, "sign_extract", "eee", RTX_BITFIELD_OPS)
1102 /* Similar for unsigned bit-field. */
1103 DEF_RTL_EXPR(ZERO_EXTRACT, "zero_extract", "eee", RTX_BITFIELD_OPS)
1105 /* For RISC machines. These save memory when splitting insns. */
1107 /* HIGH are the high-order bits of a constant expression. */
1108 DEF_RTL_EXPR(HIGH, "high", "e", RTX_CONST_OBJ)
1110 /* LO_SUM is the sum of a register and the low-order bits
1111 of a constant expression. */
1112 DEF_RTL_EXPR(LO_SUM, "lo_sum", "ee", RTX_OBJ)
1114 /* Header for range information. Operand 0 is the NOTE_INSN_RANGE_BEG insn.
1115 Operand 1 is the NOTE_INSN_RANGE_END insn. Operand 2 is a vector of all of
1116 the registers that can be substituted within this range. Operand 3 is the
1117 number of calls in the range. Operand 4 is the number of insns in the
1118 range. Operand 5 is the unique range number for this range. Operand 6 is
1119 the basic block # of the start of the live range. Operand 7 is the basic
1120 block # of the end of the live range. Operand 8 is the loop depth. Operand
1121 9 is a bitmap of the registers live at the start of the range. Operand 10
1122 is a bitmap of the registers live at the end of the range. Operand 11 is
1123 marker number for the start of the range. Operand 12 is the marker number
1124 for the end of the range. */
1125 DEF_RTL_EXPR(RANGE_INFO, "range_info", "uuEiiiiiibbii", RTX_EXTRA)
1127 /* Registers that can be substituted within the range. Operand 0 is the
1128 original pseudo register number. Operand 1 will be filled in with the
1129 pseudo register the value is copied for the duration of the range. Operand
1130 2 is the number of references within the range to the register. Operand 3
1131 is the number of sets or clobbers of the register in the range. Operand 4
1132 is the number of deaths the register has. Operand 5 is the copy flags that
1133 give the status of whether a copy is needed from the original register to
1134 the new register at the beginning of the range, or whether a copy from the
1135 new register back to the original at the end of the range. Operand 6 is the
1136 live length. Operand 7 is the number of calls that this register is live
1137 across. Operand 8 is the symbol node of the variable if the register is a
1138 user variable. Operand 9 is the block node that the variable is declared
1139 in if the register is a user variable. */
1140 DEF_RTL_EXPR(RANGE_REG, "range_reg", "iiiiiiiitt", RTX_EXTRA)
1142 /* Information about a local variable's ranges. Operand 0 is an EXPR_LIST of
1143 the different ranges a variable is in where it is copied to a different
1144 pseudo register. Operand 1 is the block that the variable is declared in.
1145 Operand 2 is the number of distinct ranges. */
1146 DEF_RTL_EXPR(RANGE_VAR, "range_var", "eti", RTX_EXTRA)
1148 /* Information about the registers that are live at the current point. Operand
1149 0 is the live bitmap. Operand 1 is the original block number. */
1150 DEF_RTL_EXPR(RANGE_LIVE, "range_live", "bi", RTX_EXTRA)
1152 /* Describes a merge operation between two vector values.
1153 Operands 0 and 1 are the vectors to be merged, operand 2 is a bitmask
1154 that specifies where the parts of the result are taken from. Set bits
1155 indicate operand 0, clear bits indicate operand 1. The parts are defined
1156 by the mode of the vectors. */
1157 DEF_RTL_EXPR(VEC_MERGE, "vec_merge", "eee", RTX_TERNARY)
1159 /* Describes an operation that selects parts of a vector.
1160 Operands 0 is the source vector, operand 1 is a PARALLEL that contains
1161 a CONST_INT for each of the subparts of the result vector, giving the
1162 number of the source subpart that should be stored into it. */
1163 DEF_RTL_EXPR(VEC_SELECT, "vec_select", "ee", RTX_BIN_ARITH)
1165 /* Describes a vector concat operation. Operands 0 and 1 are the source
1166 vectors, the result is a vector that is as long as operands 0 and 1
1167 combined and is the concatenation of the two source vectors. */
1168 DEF_RTL_EXPR(VEC_CONCAT, "vec_concat", "ee", RTX_BIN_ARITH)
1170 /* Describes an operation that converts a small vector into a larger one by
1171 duplicating the input values. The output vector mode must have the same
1172 submodes as the input vector mode, and the number of output parts must be
1173 an integer multiple of the number of input parts. */
1174 DEF_RTL_EXPR(VEC_DUPLICATE, "vec_duplicate", "e", RTX_UNARY)
1176 /* Addition with signed saturation */
1177 DEF_RTL_EXPR(SS_PLUS, "ss_plus", "ee", RTX_COMM_ARITH)
1179 /* Addition with unsigned saturation */
1180 DEF_RTL_EXPR(US_PLUS, "us_plus", "ee", RTX_COMM_ARITH)
1182 /* Operand 0 minus operand 1, with signed saturation. */
1183 DEF_RTL_EXPR(SS_MINUS, "ss_minus", "ee", RTX_BIN_ARITH)
1185 /* Operand 0 minus operand 1, with unsigned saturation. */
1186 DEF_RTL_EXPR(US_MINUS, "us_minus", "ee", RTX_BIN_ARITH)
1188 /* Signed saturating truncate. */
1189 DEF_RTL_EXPR(SS_TRUNCATE, "ss_truncate", "e", RTX_UNARY)
1191 /* Unsigned saturating truncate. */
1192 DEF_RTL_EXPR(US_TRUNCATE, "us_truncate", "e", RTX_UNARY)
1194 /* Information about the variable and its location. */
1195 DEF_RTL_EXPR(VAR_LOCATION, "var_location", "te", RTX_EXTRA)
projects / gcc.git / blob