1 /* Top level of GNU C compiler
2 Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001 Free Software Foundation, Inc.
5 This file is part of GNU CC.
7 GNU CC is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2, or (at your option)
12 GNU CC is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with GNU CC; see the file COPYING. If not, write to
19 the Free Software Foundation, 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
22 /* This is the top level of cc1/c++.
23 It parses command args, opens files, invokes the various passes
24 in the proper order, and counts the time used by each.
25 Error messages and low-level interface to malloc also handled here. */
28 #undef FLOAT /* This is for hpux. They should change hpux. */
29 #undef FFS /* Some systems define this in param.h. */
34 #ifdef HAVE_SYS_RESOURCE_H
35 # include <sys/resource.h>
38 #ifdef HAVE_SYS_TIMES_H
39 # include <sys/times.h>
47 #include "insn-attr.h"
48 #include "insn-codes.h"
49 #include "insn-config.h"
50 #include "hard-reg-set.h"
58 #include "basic-block.h"
65 #include "diagnostic.h"
68 #ifndef ACCUMULATE_OUTGOING_ARGS
69 #define ACCUMULATE_OUTGOING_ARGS 0
72 #ifdef DWARF_DEBUGGING_INFO
76 #if defined (DWARF2_UNWIND_INFO) || defined (DWARF2_DEBUGGING_INFO)
77 #include "dwarf2out.h"
80 #if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO)
84 #ifdef SDB_DEBUGGING_INFO
88 #ifdef XCOFF_DEBUGGING_INFO
93 /* The extra parameters substantially improve the I/O performance. */
96 vms_fopen (fname
, type
)
100 /* The <stdio.h> in the gcc-vms-1.42 distribution prototypes fopen with two
101 fixed arguments, which matches ANSI's specification but not VAXCRTL's
102 pre-ANSI implementation. This hack circumvents the mismatch problem. */
103 FILE *(*vmslib_fopen
)() = (FILE *(*)()) fopen
;
106 return (*vmslib_fopen
) (fname
, type
, "mbc=32",
107 "deq=64", "fop=tef", "shr=nil");
109 return (*vmslib_fopen
) (fname
, type
, "mbc=32");
112 #define fopen vms_fopen
115 #ifndef DEFAULT_GDB_EXTENSIONS
116 #define DEFAULT_GDB_EXTENSIONS 1
119 /* If more than one debugging type is supported, you must define
120 PREFERRED_DEBUGGING_TYPE to choose a format in a system-dependent way.
122 This is one long line cause VAXC can't handle a \-newline. */
123 #if 1 < (defined (DBX_DEBUGGING_INFO) + defined (SDB_DEBUGGING_INFO) + defined (DWARF_DEBUGGING_INFO) + defined (DWARF2_DEBUGGING_INFO) + defined (XCOFF_DEBUGGING_INFO))
124 #ifndef PREFERRED_DEBUGGING_TYPE
125 You Lose
! You must define PREFERRED_DEBUGGING_TYPE
!
126 #endif /* no PREFERRED_DEBUGGING_TYPE */
127 #else /* Only one debugging format supported. Define PREFERRED_DEBUGGING_TYPE
128 so the following code needn't care. */
129 #ifdef DBX_DEBUGGING_INFO
130 #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
132 #ifdef SDB_DEBUGGING_INFO
133 #define PREFERRED_DEBUGGING_TYPE SDB_DEBUG
135 #ifdef DWARF_DEBUGGING_INFO
136 #define PREFERRED_DEBUGGING_TYPE DWARF_DEBUG
138 #ifdef DWARF2_DEBUGGING_INFO
139 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
141 #ifdef XCOFF_DEBUGGING_INFO
142 #define PREFERRED_DEBUGGING_TYPE XCOFF_DEBUG
144 #endif /* More than one debugger format enabled. */
146 /* If still not defined, must have been because no debugging formats
148 #ifndef PREFERRED_DEBUGGING_TYPE
149 #define PREFERRED_DEBUGGING_TYPE NO_DEBUG
152 #if defined (HAVE_DECL_ENVIRON) && !HAVE_DECL_ENVIRON
153 extern char **environ
;
156 /* Carry information from ASM_DECLARE_OBJECT_NAME
157 to ASM_FINISH_DECLARE_OBJECT. */
159 extern int size_directive_output
;
160 extern tree last_assemble_variable_decl
;
162 static void set_target_switch
PARAMS ((const char *));
163 static const char *decl_name
PARAMS ((tree
, int));
165 static void float_signal
PARAMS ((int)) ATTRIBUTE_NORETURN
;
166 static void crash_signal
PARAMS ((int)) ATTRIBUTE_NORETURN
;
167 #ifdef ASM_IDENTIFY_LANGUAGE
168 /* This might or might not be used in ASM_IDENTIFY_LANGUAGE. */
169 static void output_lang_identify
PARAMS ((FILE *)) ATTRIBUTE_UNUSED
;
171 static void compile_file
PARAMS ((const char *));
172 static void display_help
PARAMS ((void));
173 static void display_target_options
PARAMS ((void));
175 static void decode_d_option
PARAMS ((const char *));
176 static int decode_f_option
PARAMS ((const char *));
177 static int decode_W_option
PARAMS ((const char *));
178 static int decode_g_option
PARAMS ((const char *));
179 static unsigned int independent_decode_option
PARAMS ((int, char **));
181 static void print_version
PARAMS ((FILE *, const char *));
182 static int print_single_switch
PARAMS ((FILE *, int, int, const char *,
183 const char *, const char *,
184 const char *, const char *));
185 static void print_switch_values
PARAMS ((FILE *, int, int, const char *,
186 const char *, const char *));
188 /* Length of line when printing switch values. */
191 /* Name of program invoked, sans directories. */
193 const char *progname
;
195 /* Copy of arguments to main. */
199 /* Name of current original source file (what was input to cpp).
200 This comes from each #-command in the actual input. */
202 const char *input_filename
;
204 /* Name of top-level original source file (what was input to cpp).
205 This comes from the #-command at the beginning of the actual input.
206 If there isn't any there, then this is the cc1 input file name. */
208 const char *main_input_filename
;
210 /* Current line number in real source file. */
214 /* Nonzero if it is unsafe to create any new pseudo registers. */
217 /* Stack of currently pending input files. */
219 struct file_stack
*input_file_stack
;
221 /* Incremented on each change to input_file_stack. */
222 int input_file_stack_tick
;
224 /* Name to use as base of names for dump output files. */
226 const char *dump_base_name
;
228 /* Bit flags that specify the machine subtype we are compiling for.
229 Bits are tested using macros TARGET_... defined in the tm.h file
230 and set by `-m...' switches. Must be defined in rtlanal.c. */
232 extern int target_flags
;
234 /* Describes a dump file. */
236 struct dump_file_info
238 /* The unique extension to apply, e.g. ".jump". */
239 const char *const extension
;
241 /* The -d<c> character that enables this dump file. */
242 char const debug_switch
;
244 /* True if there is a corresponding graph dump file. */
245 char const graph_dump_p
;
247 /* True if the user selected this dump. */
250 /* True if the files have been initialized (ie truncated). */
254 /* Enumerate the extant dump files. */
292 /* Describes all the dump files. Should be kept in order of the
293 pass and in sync with dump_file_index above.
295 Remaining -d letters:
301 struct dump_file_info dump_file
[DFI_MAX
] =
303 { "rtl", 'r', 0, 0, 0 },
304 { "sibling", 'i', 0, 0, 0 },
305 { "jump", 'j', 0, 0, 0 },
306 { "cse", 's', 0, 0, 0 },
307 { "addressof", 'F', 0, 0, 0 },
308 { "ssa", 'e', 1, 0, 0 },
309 { "dce", 'X', 1, 0, 0 },
310 { "ussa", 'e', 1, 0, 0 }, /* Yes, duplicate enable switch. */
311 { "gcse", 'G', 1, 0, 0 },
312 { "loop", 'L', 1, 0, 0 },
313 { "cse2", 't', 1, 0, 0 },
314 { "cfg", 'f', 1, 0, 0 },
315 { "bp", 'b', 1, 0, 0 },
316 { "life", 'f', 1, 0, 0 }, /* Yes, duplicate enable switch. */
317 { "combine", 'c', 1, 0, 0 },
318 { "ce", 'C', 1, 0, 0 },
319 { "regmove", 'N', 1, 0, 0 },
320 { "sched", 'S', 1, 0, 0 },
321 { "lreg", 'l', 1, 0, 0 },
322 { "greg", 'g', 1, 0, 0 },
323 { "postreload", 'o', 1, 0, 0 },
324 { "flow2", 'w', 1, 0, 0 },
325 { "peephole2", 'z', 1, 0, 0 },
326 { "rnreg", 'n', 1, 0, 0 },
327 { "ce2", 'E', 1, 0, 0 },
328 { "sched2", 'R', 1, 0, 0 },
329 { "bbro", 'B', 1, 0, 0 },
330 { "jump2", 'J', 1, 0, 0 },
331 { "mach", 'M', 1, 0, 0 },
332 { "dbr", 'd', 0, 0, 0 },
333 { "stack", 'k', 1, 0, 0 },
336 static int open_dump_file
PARAMS ((enum dump_file_index
, tree
));
337 static void close_dump_file
PARAMS ((enum dump_file_index
,
338 void (*) (FILE *, rtx
), rtx
));
340 /* Other flags saying which kinds of debugging dump have been requested. */
342 int rtl_dump_and_exit
;
343 int flag_print_asm_name
;
344 static int flag_print_mem
;
345 static int version_flag
;
346 static char *filename
;
347 enum graph_dump_types graph_dump_format
;
349 /* Name for output file of assembly code, specified with -o. */
353 /* Value of the -G xx switch, and whether it was passed or not. */
357 /* Type(s) of debugging information we are producing (if any).
358 See flags.h for the definitions of the different possible
359 types of debugging information. */
360 enum debug_info_type write_symbols
= NO_DEBUG
;
362 /* Level of debugging information we are producing. See flags.h
363 for the definitions of the different possible levels. */
364 enum debug_info_level debug_info_level
= DINFO_LEVEL_NONE
;
366 /* Nonzero means use GNU-only extensions in the generated symbolic
367 debugging information. */
368 /* Currently, this only has an effect when write_symbols is set to
369 DBX_DEBUG, XCOFF_DEBUG, or DWARF_DEBUG. */
370 int use_gnu_debug_info_extensions
= 0;
372 /* Nonzero means do optimizations. -O.
373 Particular numeric values stand for particular amounts of optimization;
374 thus, -O2 stores 2 here. However, the optimizations beyond the basic
375 ones are not controlled directly by this variable. Instead, they are
376 controlled by individual `flag_...' variables that are defaulted
377 based on this variable. */
381 /* Nonzero means optimize for size. -Os.
382 The only valid values are zero and non-zero. When optimize_size is
383 non-zero, optimize defaults to 2, but certain individual code
384 bloating optimizations are disabled. */
386 int optimize_size
= 0;
388 /* Number of error messages and warning messages so far. */
391 int warningcount
= 0;
394 /* The FUNCTION_DECL for the function currently being compiled,
395 or 0 if between functions. */
396 tree current_function_decl
;
398 /* Set to the FUNC_BEGIN label of the current function, or NULL_TREE
400 tree current_function_func_begin_label
;
402 /* Pointer to function to compute the name to use to print a declaration.
403 DECL is the declaration in question.
404 VERBOSITY determines what information will be printed:
405 0: DECL_NAME, demangled as necessary.
406 1: and scope information.
407 2: and any other information that might be interesting, such as function
408 parameter types in C++. */
410 const char *(*decl_printable_name
) PARAMS ((tree
, int));
412 /* Pointer to function to compute rtl for a language-specific tree code. */
414 typedef rtx (*lang_expand_expr_t
)
415 PARAMS ((union tree_node
*, rtx
, enum machine_mode
,
416 enum expand_modifier modifier
));
418 lang_expand_expr_t lang_expand_expr
= 0;
420 tree (*lang_expand_constant
) PARAMS ((tree
)) = 0;
422 /* Pointer to function to finish handling an incomplete decl at the
423 end of compilation. */
425 void (*incomplete_decl_finalize_hook
) PARAMS ((tree
)) = 0;
427 /* Nonzero if doing dwarf2 duplicate elimination. */
429 int flag_eliminate_dwarf2_dups
= 0;
431 /* Nonzero if generating code to do profiling. */
433 int profile_flag
= 0;
435 /* Nonzero if generating code to do profiling on a line-by-line basis. */
437 int profile_block_flag
;
439 /* Nonzero if generating code to profile program flow graph arcs. */
441 int profile_arc_flag
= 0;
443 /* Nonzero if generating info for gcov to calculate line test coverage. */
445 int flag_test_coverage
= 0;
447 /* Nonzero indicates that branch taken probabilities should be calculated. */
449 int flag_branch_probabilities
= 0;
451 /* Nonzero if basic blocks should be reordered. */
453 int flag_reorder_blocks
= 0;
455 /* Nonzero if registers should be renamed. */
457 int flag_rename_registers
= 0;
459 /* Nonzero for -pedantic switch: warn about anything
460 that standard spec forbids. */
464 /* Temporarily suppress certain warnings.
465 This is set while reading code from a system header file. */
467 int in_system_header
= 0;
469 /* Don't print functions as they are compiled. -quiet. */
473 /* Print times taken by the various passes. -ftime-report. */
477 /* Print memory still in use at end of compilation (which may have little
478 to do with peak memory consumption). -fmem-report. */
482 /* Non-zero means to collect statistics which might be expensive
483 and to print them when we are done. */
484 int flag_detailed_statistics
= 0;
489 /* Nonzero means `char' should be signed. */
491 int flag_signed_char
;
493 /* Nonzero means give an enum type only as many bytes as it needs. */
495 int flag_short_enums
;
497 /* Nonzero for -fcaller-saves: allocate values in regs that need to
498 be saved across function calls, if that produces overall better code.
499 Optional now, so people can test it. */
501 #ifdef DEFAULT_CALLER_SAVES
502 int flag_caller_saves
= 1;
504 int flag_caller_saves
= 0;
507 /* Nonzero if structures and unions should be returned in memory.
509 This should only be defined if compatibility with another compiler or
510 with an ABI is needed, because it results in slower code. */
512 #ifndef DEFAULT_PCC_STRUCT_RETURN
513 #define DEFAULT_PCC_STRUCT_RETURN 1
516 /* Nonzero for -fpcc-struct-return: return values the same way PCC does. */
518 int flag_pcc_struct_return
= DEFAULT_PCC_STRUCT_RETURN
;
520 /* Nonzero for -fforce-mem: load memory value into a register
521 before arithmetic on it. This makes better cse but slower compilation. */
523 int flag_force_mem
= 0;
525 /* Nonzero for -fforce-addr: load memory address into a register before
526 reference to memory. This makes better cse but slower compilation. */
528 int flag_force_addr
= 0;
530 /* Nonzero for -fdefer-pop: don't pop args after each function call;
531 instead save them up to pop many calls' args with one insns. */
533 int flag_defer_pop
= 0;
535 /* Nonzero for -ffloat-store: don't allocate floats and doubles
536 in extended-precision registers. */
538 int flag_float_store
= 0;
540 /* Nonzero for -fcse-follow-jumps:
541 have cse follow jumps to do a more extensive job. */
543 int flag_cse_follow_jumps
;
545 /* Nonzero for -fcse-skip-blocks:
546 have cse follow a branch around a block. */
547 int flag_cse_skip_blocks
;
549 /* Nonzero for -fexpensive-optimizations:
550 perform miscellaneous relatively-expensive optimizations. */
551 int flag_expensive_optimizations
;
553 /* Nonzero for -fthread-jumps:
554 have jump optimize output of loop. */
556 int flag_thread_jumps
;
558 /* Nonzero enables strength-reduction in loop.c. */
560 int flag_strength_reduce
= 0;
562 /* Nonzero enables loop unrolling in unroll.c. Only loops for which the
563 number of iterations can be calculated at compile-time (UNROLL_COMPLETELY,
564 UNROLL_MODULO) or at run-time (preconditioned to be UNROLL_MODULO) are
567 int flag_unroll_loops
;
569 /* Nonzero enables loop unrolling in unroll.c. All loops are unrolled.
570 This is generally not a win. */
572 int flag_unroll_all_loops
;
574 /* Nonzero forces all invariant computations in loops to be moved
577 int flag_move_all_movables
= 0;
579 /* Nonzero forces all general induction variables in loops to be
582 int flag_reduce_all_givs
= 0;
584 /* Nonzero to perform full register move optimization passes. This is the
587 int flag_regmove
= 0;
589 /* Nonzero for -fwritable-strings:
590 store string constants in data segment and don't uniquize them. */
592 int flag_writable_strings
= 0;
594 /* Nonzero means don't put addresses of constant functions in registers.
595 Used for compiling the Unix kernel, where strange substitutions are
596 done on the assembly output. */
598 int flag_no_function_cse
= 0;
600 /* Nonzero for -fomit-frame-pointer:
601 don't make a frame pointer in simple functions that don't require one. */
603 int flag_omit_frame_pointer
= 0;
605 /* Nonzero means place each function into its own section on those platforms
606 which support arbitrary section names and unlimited numbers of sections. */
608 int flag_function_sections
= 0;
610 /* ... and similar for data. */
612 int flag_data_sections
= 0;
614 /* Nonzero to inhibit use of define_optimization peephole opts. */
616 int flag_no_peephole
= 0;
618 /* Nonzero allows GCC to violate some IEEE or ANSI rules regarding math
619 operations in the interest of optimization. For example it allows
620 GCC to assume arguments to sqrt are nonnegative numbers, allowing
621 faster code for sqrt to be generated. */
623 int flag_fast_math
= 0;
625 /* Nonzero allows GCC to optimize sibling and tail recursive calls. */
627 int flag_optimize_sibling_calls
= 0;
629 /* Nonzero means the front end generally wants `errno' maintained by math
630 operations, like built-in SQRT, unless overridden by flag_fast_math. */
632 int flag_errno_math
= 1;
634 /* 0 means straightforward implementation of complex divide acceptable.
635 1 means wide ranges of inputs must work for complex divide.
636 2 means C99-like requirements for complex divide (not yet implemented). */
638 int flag_complex_divide_method
= 0;
640 /* Nonzero means all references through pointers are volatile. */
644 /* Nonzero means treat all global and extern variables as volatile. */
646 int flag_volatile_global
;
648 /* Nonzero means treat all static variables as volatile. */
650 int flag_volatile_static
;
652 /* Nonzero means just do syntax checking; don't output anything. */
654 int flag_syntax_only
= 0;
656 /* Nonzero means perform global cse. */
658 static int flag_gcse
;
660 /* Nonzero means to use global dataflow analysis to eliminate
661 useless null pointer tests. */
663 static int flag_delete_null_pointer_checks
;
665 /* Nonzero means to rerun cse after loop optimization. This increases
666 compilation time about 20% and picks up a few more common expressions. */
668 static int flag_rerun_cse_after_loop
;
670 /* Nonzero means to run loop optimizations twice. */
672 int flag_rerun_loop_opt
;
674 /* Nonzero for -finline-functions: ok to inline functions that look like
675 good inline candidates. */
677 int flag_inline_functions
;
679 /* Nonzero for -fkeep-inline-functions: even if we make a function
680 go inline everywhere, keep its definition around for debugging
683 int flag_keep_inline_functions
;
685 /* Nonzero means that functions will not be inlined. */
689 /* Nonzero means that we should emit static const variables
690 regardless of whether or not optimization is turned on. */
692 int flag_keep_static_consts
= 1;
694 /* Nonzero means we should be saving declaration info into a .X file. */
696 int flag_gen_aux_info
= 0;
698 /* Specified name of aux-info file. */
700 static char *aux_info_file_name
;
702 /* Nonzero means make the text shared if supported. */
704 int flag_shared_data
;
706 /* Nonzero means schedule into delayed branch slots if supported. */
708 int flag_delayed_branch
;
710 /* Nonzero if we are compiling pure (sharable) code.
711 Value is 1 if we are doing reasonable (i.e. simple
712 offset into offset table) pic. Value is 2 if we can
713 only perform register offsets. */
717 /* Nonzero means generate extra code for exception handling and enable
718 exception handling. */
722 /* Nonzero means use the new model for exception handling. Replaces
723 -DNEW_EH_MODEL as a compile option. */
725 int flag_new_exceptions
= 1;
727 /* Nonzero means generate frame unwind info table when supported. */
729 int flag_unwind_tables
= 0;
731 /* Nonzero means don't place uninitialized global data in common storage
736 /* Nonzero means pretend it is OK to examine bits of target floats,
737 even if that isn't true. The resulting code will have incorrect constants,
738 but the same series of instructions that the native compiler would make. */
740 int flag_pretend_float
;
742 /* Nonzero means change certain warnings into errors.
743 Usually these are warnings about failure to conform to some standard. */
745 int flag_pedantic_errors
= 0;
747 /* flag_schedule_insns means schedule insns within basic blocks (before
749 flag_schedule_insns_after_reload means schedule insns after
752 int flag_schedule_insns
= 0;
753 int flag_schedule_insns_after_reload
= 0;
755 /* The following flags have effect only for scheduling before register
758 flag_schedule_interblock means schedule insns accross basic blocks.
759 flag_schedule_speculative means allow speculative motion of non-load insns.
760 flag_schedule_speculative_load means allow speculative motion of some
762 flag_schedule_speculative_load_dangerous allows speculative motion of more
765 int flag_schedule_interblock
= 1;
766 int flag_schedule_speculative
= 1;
767 int flag_schedule_speculative_load
= 0;
768 int flag_schedule_speculative_load_dangerous
= 0;
770 int flag_single_precision_constant
;
772 /* flag_branch_on_count_reg means try to replace add-1,compare,branch tupple
773 by a cheaper branch on a count register. */
774 int flag_branch_on_count_reg
= 1;
776 /* -finhibit-size-directive inhibits output of .size for ELF.
777 This is used only for compiling crtstuff.c,
778 and it may be extended to other effects
779 needed for crtstuff.c on other systems. */
780 int flag_inhibit_size_directive
= 0;
782 /* -fverbose-asm causes extra commentary information to be produced in
783 the generated assembly code (to make it more readable). This option
784 is generally only of use to those who actually need to read the
785 generated assembly code (perhaps while debugging the compiler itself).
786 -fno-verbose-asm, the default, causes the extra information
787 to be omitted and is useful when comparing two assembler files. */
789 int flag_verbose_asm
= 0;
791 /* -dA causes debug commentary information to be produced in
792 the generated assembly code (to make it more readable). This option
793 is generally only of use to those who actually need to read the
794 generated assembly code (perhaps while debugging the compiler itself).
795 Currently, this switch is only used by dwarfout.c; however, it is intended
796 to be a catchall for printing debug information in the assembler file. */
798 int flag_debug_asm
= 0;
800 /* -dP causes the rtl to be emitted as a comment in assembly. */
802 int flag_dump_rtl_in_asm
= 0;
804 /* -fgnu-linker specifies use of the GNU linker for initializations.
805 (Or, more generally, a linker that handles initializations.)
806 -fno-gnu-linker says that collect2 will be used. */
808 int flag_gnu_linker
= 0;
810 int flag_gnu_linker
= 1;
816 /* Enable dead code elimination. */
819 /* Tag all structures with __attribute__(packed). */
820 int flag_pack_struct
= 0;
822 /* Emit code to check for stack overflow; also may cause large objects
823 to be allocated dynamically. */
824 int flag_stack_check
;
826 /* When non-NULL, indicates that whenever space is allocated on the
827 stack, the resulting stack pointer must not pass this
828 address---that is, for stacks that grow downward, the stack pointer
829 must always be greater than or equal to this address; for stacks
830 that grow upward, the stack pointer must be less than this address.
831 At present, the rtx may be either a REG or a SYMBOL_REF, although
832 the support provided depends on the backend. */
835 /* -fcheck-memory-usage causes extra code to be generated in order to check
836 memory accesses. This is used by a detector of bad memory accesses such
838 int flag_check_memory_usage
= 0;
840 /* -fprefix-function-name causes function name to be prefixed. This
841 can be used with -fcheck-memory-usage to isolate code compiled with
842 -fcheck-memory-usage. */
843 int flag_prefix_function_name
= 0;
845 /* 0 if pointer arguments may alias each other. True in C.
846 1 if pointer arguments may not alias each other but may alias
848 2 if pointer arguments may not alias each other and may not
849 alias global variables. True in Fortran.
850 This defaults to 0 for C. */
851 int flag_argument_noalias
= 0;
853 /* Nonzero if we should do (language-dependent) alias analysis.
854 Typically, this analysis will assume that expressions of certain
855 types do not alias expressions of certain other types. Only used
856 if alias analysis (in general) is enabled. */
857 int flag_strict_aliasing
= 0;
859 /* Instrument functions with calls at entry and exit, for profiling. */
860 int flag_instrument_function_entry_exit
= 0;
862 /* Nonzero means ignore `#ident' directives. 0 means handle them.
863 On SVR4 targets, it also controls whether or not to emit a
864 string identifying the compiler. */
866 int flag_no_ident
= 0;
868 /* This will perform a peephole pass before sched2. */
869 int flag_peephole2
= 0;
871 /* -fbounded-pointers causes gcc to compile pointers as composite
872 objects occupying three words: the pointer value, the base address
873 of the referent object, and the address immediately beyond the end
874 of the referent object. The base and extent allow us to perform
875 runtime bounds checking. -fbounded-pointers implies -fcheck-bounds. */
876 int flag_bounded_pointers
= 0;
878 /* -fcheck-bounds causes gcc to generate array bounds checks.
879 For C, C++: defaults to value of flag_bounded_pointers.
880 For ObjC: defaults to off.
881 For Java: defaults to on.
882 For Fortran: defaults to off.
883 For CHILL: defaults to off. */
884 int flag_bounds_check
= 0;
886 /* If one, renumber instruction UIDs to reduce the number of
887 unused UIDs if there are a lot of instructions. If greater than
888 one, unconditionally renumber instruction UIDs. */
889 int flag_renumber_insns
= 1;
891 /* Values of the -falign-* flags: how much to align labels in code.
892 0 means `use default', 1 means `don't align'.
893 For each variable, there is an _log variant which is the power
894 of two not less than the variable, for .align output. */
901 int align_labels_log
;
903 int align_functions_log
;
905 /* Table of supported debugging formats. */
909 /* Since PREFERRED_DEBUGGING_TYPE isn't necessarily a
910 constant expression, we use NO_DEBUG in its place. */
911 enum debug_info_type debug_type
;
912 int use_extensions_p
;
913 const char *description
;
917 { "", NO_DEBUG
, DEFAULT_GDB_EXTENSIONS
,
918 "Generate default debug format output" },
919 { "gdb", NO_DEBUG
, 1, "Generate default extended debug format output" },
920 #ifdef DBX_DEBUGGING_INFO
921 { "stabs", DBX_DEBUG
, 0, "Generate STABS format debug output" },
922 { "stabs+", DBX_DEBUG
, 1, "Generate extended STABS format debug output" },
924 #ifdef DWARF_DEBUGGING_INFO
925 { "dwarf", DWARF_DEBUG
, 0, "Generate DWARF-1 format debug output"},
926 { "dwarf+", DWARF_DEBUG
, 1,
927 "Generated extended DWARF-1 format debug output" },
929 #ifdef DWARF2_DEBUGGING_INFO
930 { "dwarf-2", DWARF2_DEBUG
, 0, "Enable DWARF-2 debug output" },
932 #ifdef XCOFF_DEBUGGING_INFO
933 { "xcoff", XCOFF_DEBUG
, 0, "Generate XCOFF format debug output" },
934 { "xcoff+", XCOFF_DEBUG
, 1, "Generate extended XCOFF format debug output" },
936 #ifdef SDB_DEBUGGING_INFO
937 { "coff", SDB_DEBUG
, 0, "Generate COFF format debug output" },
947 const char *description
;
949 lang_independent_options
;
953 /* Add or remove a leading underscore from user symbols. */
954 int flag_leading_underscore
= -1;
956 /* The user symbol prefix after having resolved same. */
957 const char *user_label_prefix
;
959 /* A default for same. */
960 #ifndef USER_LABEL_PREFIX
961 #define USER_LABEL_PREFIX ""
964 /* Table of language-independent -f options.
965 STRING is the option name. VARIABLE is the address of the variable.
966 ON_VALUE is the value to store in VARIABLE
967 if `-fSTRING' is seen as an option.
968 (If `-fno-STRING' is seen as an option, the opposite value is stored.) */
970 lang_independent_options f_options
[] =
972 {"eliminate-dwarf2-dups", &flag_eliminate_dwarf2_dups
, 1,
973 "Perform DWARF2 duplicate elimination"},
974 {"float-store", &flag_float_store
, 1,
975 "Do not store floats in registers" },
976 {"volatile", &flag_volatile
, 1,
977 "Consider all mem refs through pointers as volatile"},
978 {"volatile-global", &flag_volatile_global
, 1,
979 "Consider all mem refs to global data to be volatile" },
980 {"volatile-static", &flag_volatile_static
, 1,
981 "Consider all mem refs to static data to be volatile" },
982 {"defer-pop", &flag_defer_pop
, 1,
983 "Defer popping functions args from stack until later" },
984 {"omit-frame-pointer", &flag_omit_frame_pointer
, 1,
985 "When possible do not generate stack frames"},
986 {"optimize-sibling-calls", &flag_optimize_sibling_calls
, 1,
987 "Optimize sibling and tail recursive calls" },
988 {"cse-follow-jumps", &flag_cse_follow_jumps
, 1,
989 "When running CSE, follow jumps to their targets" },
990 {"cse-skip-blocks", &flag_cse_skip_blocks
, 1,
991 "When running CSE, follow conditional jumps" },
992 {"expensive-optimizations", &flag_expensive_optimizations
, 1,
993 "Perform a number of minor, expensive optimisations" },
994 {"thread-jumps", &flag_thread_jumps
, 1,
995 "Perform jump threading optimisations"},
996 {"strength-reduce", &flag_strength_reduce
, 1,
997 "Perform strength reduction optimisations" },
998 {"unroll-loops", &flag_unroll_loops
, 1,
999 "Perform loop unrolling when iteration count is known" },
1000 {"unroll-all-loops", &flag_unroll_all_loops
, 1,
1001 "Perform loop unrolling for all loops" },
1002 {"move-all-movables", &flag_move_all_movables
, 1,
1003 "Force all loop invariant computations out of loops" },
1004 {"reduce-all-givs", &flag_reduce_all_givs
, 1,
1005 "Strength reduce all loop general induction variables" },
1006 {"writable-strings", &flag_writable_strings
, 1,
1007 "Store strings in writable data section" },
1008 {"peephole", &flag_no_peephole
, 0,
1009 "Enable machine specific peephole optimisations" },
1010 {"force-mem", &flag_force_mem
, 1,
1011 "Copy memory operands into registers before using" },
1012 {"force-addr", &flag_force_addr
, 1,
1013 "Copy memory address constants into regs before using" },
1014 {"function-cse", &flag_no_function_cse
, 0,
1015 "Allow function addresses to be held in registers" },
1016 {"inline-functions", &flag_inline_functions
, 1,
1017 "Integrate simple functions into their callers" },
1018 {"keep-inline-functions", &flag_keep_inline_functions
, 1,
1019 "Generate code for funcs even if they are fully inlined" },
1020 {"inline", &flag_no_inline
, 0,
1021 "Pay attention to the 'inline' keyword"},
1022 {"keep-static-consts", &flag_keep_static_consts
, 1,
1023 "Emit static const variables even if they are not used" },
1024 {"syntax-only", &flag_syntax_only
, 1,
1025 "Check for syntax errors, then stop" },
1026 {"shared-data", &flag_shared_data
, 1,
1027 "Mark data as shared rather than private" },
1028 {"caller-saves", &flag_caller_saves
, 1,
1029 "Enable saving registers around function calls" },
1030 {"pcc-struct-return", &flag_pcc_struct_return
, 1,
1031 "Return 'short' aggregates in memory, not registers" },
1032 {"reg-struct-return", &flag_pcc_struct_return
, 0,
1033 "Return 'short' aggregates in registers" },
1034 {"delayed-branch", &flag_delayed_branch
, 1,
1035 "Attempt to fill delay slots of branch instructions" },
1036 {"gcse", &flag_gcse
, 1,
1037 "Perform the global common subexpression elimination" },
1038 {"rerun-cse-after-loop", &flag_rerun_cse_after_loop
, 1,
1039 "Run CSE pass after loop optimisations"},
1040 {"rerun-loop-opt", &flag_rerun_loop_opt
, 1,
1041 "Run the loop optimiser twice"},
1042 {"delete-null-pointer-checks", &flag_delete_null_pointer_checks
, 1,
1043 "Delete useless null pointer checks" },
1044 {"pretend-float", &flag_pretend_float
, 1,
1045 "Pretend that host and target use the same FP format"},
1046 {"schedule-insns", &flag_schedule_insns
, 1,
1047 "Reschedule instructions to avoid pipeline stalls"},
1048 {"schedule-insns2", &flag_schedule_insns_after_reload
, 1,
1049 "Run two passes of the instruction scheduler"},
1050 {"sched-interblock",&flag_schedule_interblock
, 1,
1051 "Enable scheduling across basic blocks" },
1052 {"sched-spec",&flag_schedule_speculative
, 1,
1053 "Allow speculative motion of non-loads" },
1054 {"sched-spec-load",&flag_schedule_speculative_load
, 1,
1055 "Allow speculative motion of some loads" },
1056 {"sched-spec-load-dangerous",&flag_schedule_speculative_load_dangerous
, 1,
1057 "Allow speculative motion of more loads" },
1058 {"branch-count-reg",&flag_branch_on_count_reg
, 1,
1059 "Replace add,compare,branch with branch on count reg"},
1060 {"pic", &flag_pic
, 1,
1061 "Generate position independent code, if possible"},
1062 {"PIC", &flag_pic
, 2, ""},
1063 {"exceptions", &flag_exceptions
, 1,
1064 "Enable exception handling" },
1065 {"new-exceptions", &flag_new_exceptions
, 1,
1066 "Use the new model for exception handling" },
1067 {"unwind-tables", &flag_unwind_tables
, 1,
1068 "Just generate unwind tables for exception handling" },
1069 {"sjlj-exceptions", &exceptions_via_longjmp
, 1,
1070 "Use setjmp/longjmp to handle exceptions" },
1071 {"asynchronous-exceptions", &asynchronous_exceptions
, 1,
1072 "Support asynchronous exceptions" },
1073 {"profile-arcs", &profile_arc_flag
, 1,
1074 "Insert arc based program profiling code" },
1075 {"test-coverage", &flag_test_coverage
, 1,
1076 "Create data files needed by gcov" },
1077 {"branch-probabilities", &flag_branch_probabilities
, 1,
1078 "Use profiling information for branch probabilities" },
1079 {"reorder-blocks", &flag_reorder_blocks
, 1,
1080 "Reorder basic blocks to improve code placement" },
1081 {"rename-registers", &flag_rename_registers
, 1,
1082 "Do the register renaming optimization pass"},
1083 {"fast-math", &flag_fast_math
, 1,
1084 "Improve FP speed by violating ANSI & IEEE rules" },
1085 {"common", &flag_no_common
, 0,
1086 "Do not put unitialised globals in the common section" },
1087 {"inhibit-size-directive", &flag_inhibit_size_directive
, 1,
1088 "Do not generate .size directives" },
1089 {"function-sections", &flag_function_sections
, 1,
1090 "place each function into its own section" },
1091 {"data-sections", &flag_data_sections
, 1,
1092 "place data items into their own section" },
1093 {"verbose-asm", &flag_verbose_asm
, 1,
1094 "Add extra commentry to assembler output"},
1095 {"gnu-linker", &flag_gnu_linker
, 1,
1096 "Output GNU ld formatted global initialisers"},
1097 {"regmove", &flag_regmove
, 1,
1098 "Enables a register move optimisation"},
1099 {"optimize-register-move", &flag_regmove
, 1,
1100 "Do the full regmove optimization pass"},
1101 {"pack-struct", &flag_pack_struct
, 1,
1102 "Pack structure members together without holes" },
1103 {"stack-check", &flag_stack_check
, 1,
1104 "Insert stack checking code into the program" },
1105 {"argument-alias", &flag_argument_noalias
, 0,
1106 "Specify that arguments may alias each other & globals"},
1107 {"argument-noalias", &flag_argument_noalias
, 1,
1108 "Assume arguments may alias globals but not each other"},
1109 {"argument-noalias-global", &flag_argument_noalias
, 2,
1110 "Assume arguments do not alias each other or globals" },
1111 {"strict-aliasing", &flag_strict_aliasing
, 1,
1112 "Assume strict aliasing rules apply" },
1113 {"align-loops", &align_loops
, 0,
1114 "Align the start of loops" },
1115 {"align-jumps", &align_jumps
, 0,
1116 "Align labels which are only reached by jumping" },
1117 {"align-labels", &align_labels
, 0,
1118 "Align all labels" },
1119 {"align-functions", &align_functions
, 0,
1120 "Align the start of functions" },
1121 {"check-memory-usage", &flag_check_memory_usage
, 1,
1122 "Generate code to check every memory access" },
1123 {"prefix-function-name", &flag_prefix_function_name
, 1,
1124 "Add a prefix to all function names" },
1125 {"dump-unnumbered", &flag_dump_unnumbered
, 1,
1126 "Suppress output of instruction numbers and line number notes in debugging dumps"},
1127 {"instrument-functions", &flag_instrument_function_entry_exit
, 1,
1128 "Instrument function entry/exit with profiling calls"},
1129 {"ssa", &flag_ssa
, 1,
1130 "Enable SSA optimizations" },
1131 {"dce", &flag_dce
, 1,
1132 "Enable dead code elimination" },
1133 {"leading-underscore", &flag_leading_underscore
, 1,
1134 "External symbols have a leading underscore" },
1135 {"ident", &flag_no_ident
, 0,
1136 "Process #ident directives"},
1137 { "peephole2", &flag_peephole2
, 1,
1138 "Enables an rtl peephole pass run before sched2" },
1139 {"math-errno", &flag_errno_math
, 1,
1140 "Set errno after built-in math functions"},
1141 {"bounded-pointers", &flag_bounded_pointers
, 1,
1142 "Compile pointers as triples: value, base & end" },
1143 {"bounds-check", &flag_bounds_check
, 1,
1144 "Generate code to check bounds before dereferencing pointers and arrays" },
1145 {"single-precision-constant", &flag_single_precision_constant
, 1,
1146 "Convert floating point constant to single precision constant"},
1147 {"time-report", &time_report
, 1,
1148 "Report time taken by each compiler pass at end of run"},
1149 {"mem-report", &mem_report
, 1,
1150 "Report on permanent memory allocation at end of run"},
1151 { "trapv", &flag_trapv
, 1,
1152 "Trap for signed overflow in addition / subtraction / multiplication." },
1155 /* Table of language-specific options. */
1157 static struct lang_opt
1160 const char *description
;
1162 documented_lang_options
[] =
1164 /* In order not to overload the --help output, the convention
1165 used here is to only describe those options which are not
1166 enabled by default. */
1168 { "-ansi", "Compile just for ISO C89" },
1169 { "-fallow-single-precision",
1170 "Do not promote floats to double if using -traditional" },
1171 { "-std= ", "Determine language standard"},
1173 { "-fsigned-bitfields", "" },
1174 { "-funsigned-bitfields","Make bitfields by unsigned by default" },
1175 { "-fno-signed-bitfields", "" },
1176 { "-fno-unsigned-bitfields","" },
1177 { "-fsigned-char", "Make 'char' be signed by default"},
1178 { "-funsigned-char", "Make 'char' be unsigned by default"},
1179 { "-fno-signed-char", "" },
1180 { "-fno-unsigned-char", "" },
1182 { "-ftraditional", "" },
1183 { "-traditional", "Attempt to support traditional K&R style C"},
1184 { "-fnotraditional", "" },
1185 { "-fno-traditional", "" },
1188 { "-fno-asm", "Do not recognise the 'asm' keyword" },
1189 { "-fbuiltin", "" },
1190 { "-fno-builtin", "Do not recognise any built in functions" },
1191 { "-fhosted", "Assume normal C execution environment" },
1192 { "-fno-hosted", "" },
1194 "Assume that standard libraries & main might not exist" },
1195 { "-fno-freestanding", "" },
1196 { "-fcond-mismatch", "Allow different types as args of ? operator"},
1197 { "-fno-cond-mismatch", "" },
1198 { "-fdollars-in-identifiers", "Allow the use of $ inside identifiers" },
1199 { "-fno-dollars-in-identifiers", "" },
1200 { "-fpreprocessed", "" },
1201 { "-fno-preprocessed", "" },
1202 { "-fshort-double", "Use the same size for double as for float" },
1203 { "-fno-short-double", "" },
1204 { "-fshort-enums", "Use the smallest fitting integer to hold enums"},
1205 { "-fno-short-enums", "" },
1206 { "-fshort-wchar", "Override the underlying type for wchar_t to `unsigned short'" },
1207 { "-fno-short-wchar", "" },
1209 { "-Wall", "Enable most warning messages" },
1210 { "-Wbad-function-cast",
1211 "Warn about casting functions to incompatible types" },
1212 { "-Wno-bad-function-cast", "" },
1213 { "-Wno-missing-noreturn", "" },
1214 { "-Wmissing-format-attribute",
1215 "Warn about functions which might be candidates for format attributes" },
1216 { "-Wno-missing-format-attribute", "" },
1217 { "-Wcast-qual", "Warn about casts which discard qualifiers"},
1218 { "-Wno-cast-qual", "" },
1219 { "-Wchar-subscripts", "Warn about subscripts whose type is 'char'"},
1220 { "-Wno-char-subscripts", "" },
1221 { "-Wcomment", "Warn if nested comments are detected" },
1222 { "-Wno-comment", "" },
1223 { "-Wcomments", "Warn if nested comments are detected" },
1224 { "-Wno-comments", "" },
1225 { "-Wconversion", "Warn about possibly confusing type conversions" },
1226 { "-Wno-conversion", "" },
1227 { "-Wformat", "Warn about printf/scanf/strftime/strfmon format anomalies" },
1228 { "-Wno-format", "" },
1229 { "-Wformat-y2k", "" },
1230 { "-Wno-format-y2k",
1231 "Don't warn about strftime formats yielding 2 digit years" },
1232 { "-Wformat-extra-args", "" },
1233 { "-Wno-format-extra-args",
1234 "Don't warn about too many arguments to format functions" },
1235 { "-Wformat-nonliteral", "Warn about non-string-literal format strings" },
1236 { "-Wno-format-nonliteral", "" },
1237 { "-Wformat-security",
1238 "Warn about possible security problems with format functions" },
1239 { "-Wno-format-security", "" },
1240 { "-Wimplicit-function-declaration",
1241 "Warn about implicit function declarations" },
1242 { "-Wno-implicit-function-declaration", "" },
1243 { "-Werror-implicit-function-declaration", "" },
1244 { "-Wimplicit-int", "Warn when a declaration does not specify a type" },
1245 { "-Wno-implicit-int", "" },
1246 { "-Wimplicit", "" },
1247 { "-Wno-implicit", "" },
1248 { "-Wimport", "Warn about the use of the #import directive" },
1249 { "-Wno-import", "" },
1250 { "-Wlong-long","" },
1251 { "-Wno-long-long", "Do not warn about using 'long long' when -pedantic" },
1252 { "-Wmain", "Warn about suspicious declarations of main" },
1253 { "-Wno-main", "" },
1254 { "-Wmissing-braces",
1255 "Warn about possibly missing braces around initialisers" },
1256 { "-Wno-missing-braces", "" },
1257 { "-Wmissing-declarations",
1258 "Warn about global funcs without previous declarations"},
1259 { "-Wno-missing-declarations", "" },
1260 { "-Wmissing-prototypes", "Warn about global funcs without prototypes" },
1261 { "-Wno-missing-prototypes", "" },
1262 { "-Wmultichar", "Warn about use of multicharacter literals"},
1263 { "-Wno-multichar", "" },
1264 { "-Wnested-externs", "Warn about externs not at file scope level" },
1265 { "-Wno-nested-externs", "" },
1266 { "-Wparentheses", "Warn about possible missing parentheses" },
1267 { "-Wno-parentheses", "" },
1268 { "-Wsequence-point",
1269 "Warn about possible violations of sequence point rules" },
1270 { "-Wno-sequence-point", "" },
1271 { "-Wpointer-arith", "Warn about function pointer arithmetic" },
1272 { "-Wno-pointer-arith", "" },
1273 { "-Wredundant-decls",
1274 "Warn about multiple declarations of the same object" },
1275 { "-Wno-redundant-decls", "" },
1276 { "-Wsign-compare", "Warn about signed/unsigned comparisons" },
1277 { "-Wno-sign-compare", "" },
1278 { "-Wfloat-equal", "Warn about testing equality of floating point numbers" },
1279 { "-Wno-float-equal", "" },
1280 { "-Wunknown-pragmas", "Warn about unrecognized pragmas" },
1281 { "-Wno-unknown-pragmas", "" },
1282 { "-Wstrict-prototypes", "Warn about non-prototyped function decls" },
1283 { "-Wno-strict-prototypes", "" },
1284 { "-Wtraditional", "Warn about constructs whose meaning change in ISO C"},
1285 { "-Wno-traditional", "" },
1286 { "-Wtrigraphs", "Warn when trigraphs are encountered" },
1287 { "-Wno-trigraphs", "" },
1289 { "-Wno-undef", "" },
1290 { "-Wwrite-strings", "Mark strings as 'const char *'"},
1291 { "-Wno-write-strings", "" },
1293 #define DEFINE_LANG_NAME(NAME) { NULL, NAME },
1295 #include "options.h"
1299 /* Here is a table, controlled by the tm.h file, listing each -m switch
1300 and which bits in `target_switches' it should set or clear.
1301 If VALUE is positive, it is bits to set.
1302 If VALUE is negative, -VALUE is bits to clear.
1303 (The sign bit is not used so there is no confusion.) */
1309 const char *description
;
1311 target_switches
[] = TARGET_SWITCHES
;
1313 /* This table is similar, but allows the switch to have a value. */
1315 #ifdef TARGET_OPTIONS
1319 const char **variable
;
1320 const char *description
;
1322 target_options
[] = TARGET_OPTIONS
;
1325 /* Options controlling warnings. */
1327 /* Don't print warning messages. -w. */
1329 int inhibit_warnings
= 0;
1331 /* Don't suppress warnings from system headers. -Wsystem-headers. */
1333 int warn_system_headers
= 0;
1335 /* Print various extra warnings. -W. */
1337 int extra_warnings
= 0;
1339 /* Treat warnings as errors. -Werror. */
1341 int warnings_are_errors
= 0;
1343 /* Nonzero to warn about unused variables, functions et.al. */
1345 int warn_unused_function
;
1346 int warn_unused_label
;
1347 int warn_unused_parameter
;
1348 int warn_unused_variable
;
1349 int warn_unused_value
;
1352 set_Wunused (setting
)
1355 warn_unused_function
= setting
;
1356 warn_unused_label
= setting
;
1357 /* Unused function parameter warnings are reported when either ``-W
1358 -Wunused'' or ``-Wunused-parameter'' is specified. Differentiate
1359 -Wunused by setting WARN_UNUSED_PARAMETER to -1. */
1361 warn_unused_parameter
= 0;
1362 else if (!warn_unused_parameter
)
1363 warn_unused_parameter
= -1;
1364 warn_unused_variable
= setting
;
1365 warn_unused_value
= setting
;
1368 /* Nonzero to warn about code which is never reached. */
1370 int warn_notreached
;
1372 /* Nonzero to warn about variables used before they are initialized. */
1374 int warn_uninitialized
;
1376 /* Nonzero means warn about all declarations which shadow others. */
1380 /* Warn if a switch on an enum fails to have a case for every enum value. */
1384 /* Nonzero means warn about function definitions that default the return type
1385 or that use a null return and have a return-type other than void. */
1387 int warn_return_type
;
1389 /* Nonzero means warn about pointer casts that increase the required
1390 alignment of the target type (and might therefore lead to a crash
1391 due to a misaligned access). */
1393 int warn_cast_align
;
1395 /* Nonzero means warn about any identifiers that match in the first N
1396 characters. The value N is in `id_clash_len'. */
1401 /* Nonzero means warn about any objects definitions whose size is larger
1402 than N bytes. Also want about function definitions whose returned
1403 values are larger than N bytes. The value N is in `larger_than_size'. */
1405 int warn_larger_than
;
1406 HOST_WIDE_INT larger_than_size
;
1408 /* Nonzero means warn if inline function is too large. */
1412 /* Warn if a function returns an aggregate,
1413 since there are often incompatible calling conventions for doing this. */
1415 int warn_aggregate_return
;
1417 /* Warn if packed attribute on struct is unnecessary and inefficient. */
1421 /* Warn when gcc pads a structure to an alignment boundary. */
1425 /* Warn when an optimization pass is disabled. */
1427 int warn_disabled_optimization
;
1429 /* Warn about functions which might be candidates for attribute noreturn. */
1431 int warn_missing_noreturn
;
1433 /* Likewise for -W. */
1435 lang_independent_options W_options
[] =
1437 {"unused-function", &warn_unused_function
, 1, "Warn when a function is unused" },
1438 {"unused-label", &warn_unused_label
, 1, "Warn when a label is unused" },
1439 {"unused-parameter", &warn_unused_parameter
, 1, "Warn when a function parameter is unused" },
1440 {"unused-variable", &warn_unused_variable
, 1, "Warn when a variable is unused" },
1441 {"unused-value", &warn_unused_value
, 1, "Warn when an expression value is unused" },
1442 {"system-headers", &warn_system_headers
, 1, "Do not suppress warnings from system headers"},
1443 {"error", &warnings_are_errors
, 1, ""},
1444 {"shadow", &warn_shadow
, 1, "Warn when one local variable shadows another" },
1445 {"switch", &warn_switch
, 1,
1446 "Warn about enumerated switches missing a specific case" },
1447 {"aggregate-return", &warn_aggregate_return
, 1,
1448 "Warn about returning structures, unions or arrays" },
1449 {"cast-align", &warn_cast_align
, 1,
1450 "Warn about pointer casts which increase alignment" },
1451 {"unreachable-code", &warn_notreached
, 1,
1452 "Warn about code that will never be executed" },
1453 {"uninitialized", &warn_uninitialized
, 1,
1454 "Warn about unitialized automatic variables"},
1455 {"inline", &warn_inline
, 1,
1456 "Warn when an inlined function cannot be inlined"},
1457 {"packed", &warn_packed
, 1,
1458 "Warn when the packed attribute has no effect on struct layout"},
1459 {"padded", &warn_padded
, 1,
1460 "Warn when padding is required to align struct members"},
1461 {"disabled-optimization", &warn_disabled_optimization
, 1,
1462 "Warn when an optimization pass is disabled"},
1463 {"missing-noreturn", &warn_missing_noreturn
, 1,
1464 "Warn about functions which might be candidates for attribute noreturn"}
1467 /* Output files for assembler code (real compiler output)
1468 and debugging dumps. */
1471 FILE *aux_info_file
;
1472 FILE *rtl_dump_file
= NULL
;
1474 /* Decode the string P as an integral parameter.
1475 If the string is indeed an integer return its numeric value else
1476 issue an Invalid Option error for the option PNAME and return DEFVAL.
1477 If PNAME is zero just return DEFVAL, do not call error. */
1480 read_integral_parameter (p
, pname
, defval
)
1485 const char *endp
= p
;
1489 if (*endp
>= '0' && *endp
<= '9')
1498 error ("Invalid option `%s'", pname
);
1506 /* This is the default decl_printable_name function. */
1509 decl_name (decl
, verbosity
)
1511 int verbosity ATTRIBUTE_UNUSED
;
1513 return IDENTIFIER_POINTER (DECL_NAME (decl
));
1517 /* This calls abort and is used to avoid problems when abort if a macro.
1518 It is used when we need to pass the address of abort. */
1526 /* When `malloc.c' is compiled with `rcheck' defined,
1527 it calls this function to report clobberage. */
1531 const char *s ATTRIBUTE_UNUSED
;
1536 /* Return the logarithm of X, base 2, considering X unsigned,
1537 if X is a power of 2. Otherwise, returns -1.
1539 This should be used via the `exact_log2' macro. */
1543 register unsigned HOST_WIDE_INT x
;
1545 register int log
= 0;
1546 /* Test for 0 or a power of 2. */
1547 if (x
== 0 || x
!= (x
& -x
))
1549 while ((x
>>= 1) != 0)
1554 /* Given X, an unsigned number, return the largest int Y such that 2**Y <= X.
1555 If X is 0, return -1.
1557 This should be used via the floor_log2 macro. */
1561 register unsigned HOST_WIDE_INT x
;
1563 register int log
= -1;
1570 /* Return the approximate positive square root of a number N. This is for
1571 statistical reports, not code generation. */
1586 d
= (s
* s
- x
) / (2 * s
);
1593 static int float_handler_set
;
1595 jmp_buf float_handler
;
1597 /* Signals actually come here. */
1600 float_signal (signo
)
1601 /* If this is missing, some compilers complain. */
1602 int signo ATTRIBUTE_UNUSED
;
1604 if (float_handled
== 0)
1605 crash_signal (signo
);
1606 #if defined (USG) || defined (hpux)
1607 /* Re-enable the signal catcher. */
1608 signal (SIGFPE
, float_signal
);
1611 signal (SIGFPE
, float_signal
);
1612 longjmp (float_handler
, 1);
1615 /* Specify where to longjmp to when a floating arithmetic error happens.
1616 If HANDLER is 0, it means don't handle the errors any more. */
1619 set_float_handler (handler
)
1622 float_handled
= (handler
!= 0);
1624 bcopy ((char *) handler
, (char *) float_handler
, sizeof (float_handler
));
1626 if (float_handled
&& ! float_handler_set
)
1628 signal (SIGFPE
, float_signal
);
1629 float_handler_set
= 1;
1633 /* This is a wrapper function for code which might elicit an
1634 arithmetic exception. That code should be passed in as a function
1635 pointer FN, and one argument DATA. DATA is usually a struct which
1636 contains the real input and output for function FN. This function
1637 returns 0 (failure) if longjmp was called (i.e. an exception
1638 occured.) It returns 1 (success) otherwise. */
1641 do_float_handler (fn
, data
)
1642 void (*fn
) PARAMS ((PTR
));
1649 /* We got here via longjmp () caused by an exception in function
1651 set_float_handler (NULL
);
1655 set_float_handler (buf
);
1657 set_float_handler (NULL
);
1661 /* Specify, in HANDLER, where to longjmp to when a floating arithmetic
1662 error happens, pushing the previous specification into OLD_HANDLER.
1663 Return an indication of whether there was a previous handler in effect. */
1666 push_float_handler (handler
, old_handler
)
1667 jmp_buf handler
, old_handler
;
1669 int was_handled
= float_handled
;
1673 memcpy ((char *) old_handler
, (char *) float_handler
,
1674 sizeof (float_handler
));
1676 memcpy ((char *) float_handler
, (char *) handler
, sizeof (float_handler
));
1680 /* Restore the previous specification of whether and where to longjmp to
1681 when a floating arithmetic error happens. */
1684 pop_float_handler (handled
, handler
)
1688 float_handled
= handled
;
1690 bcopy ((char *) handler
, (char *) float_handler
, sizeof (float_handler
));
1693 /* Handler for fatal signals, such as SIGSEGV. These are transformed
1694 into ICE messages, which is much more user friendly. */
1697 crash_signal (signo
)
1698 /* If this is missing, some compilers complain. */
1701 fatal ("Internal error: %s.", strsignal (signo
));
1704 /* Strip off a legitimate source ending from the input string NAME of
1705 length LEN. Rather than having to know the names used by all of
1706 our front ends, we strip off an ending of a period followed by
1707 up to five characters. (Java uses ".class".) */
1710 strip_off_ending (name
, len
)
1715 for (i
= 2; i
< 6 && len
> i
; i
++)
1717 if (name
[len
- i
] == '.')
1719 name
[len
- i
] = '\0';
1725 /* Given a file name X, return the nondirectory portion. */
1728 file_name_nondirectory (x
)
1731 char *tmp
= (char *) strrchr (x
, '/');
1732 if (DIR_SEPARATOR
!= '/' && ! tmp
)
1733 tmp
= (char *) strrchr (x
, DIR_SEPARATOR
);
1735 return (char *) (tmp
+ 1);
1740 /* Output a quoted string. */
1743 output_quoted_string (asm_file
, string
)
1747 #ifdef OUTPUT_QUOTED_STRING
1748 OUTPUT_QUOTED_STRING (asm_file
, string
);
1752 putc ('\"', asm_file
);
1753 while ((c
= *string
++) != 0)
1755 if (c
== '\"' || c
== '\\')
1756 putc ('\\', asm_file
);
1759 putc ('\"', asm_file
);
1763 /* Output a file name in the form wanted by System V. */
1766 output_file_directive (asm_file
, input_name
)
1768 const char *input_name
;
1770 int len
= strlen (input_name
);
1771 const char *na
= input_name
+ len
;
1773 /* NA gets INPUT_NAME sans directory names. */
1774 while (na
> input_name
)
1776 if (IS_DIR_SEPARATOR (na
[-1]))
1781 #ifdef ASM_OUTPUT_MAIN_SOURCE_FILENAME
1782 ASM_OUTPUT_MAIN_SOURCE_FILENAME (asm_file
, na
);
1784 #ifdef ASM_OUTPUT_SOURCE_FILENAME
1785 ASM_OUTPUT_SOURCE_FILENAME (asm_file
, na
);
1787 fprintf (asm_file
, "\t.file\t");
1788 output_quoted_string (asm_file
, na
);
1789 fputc ('\n', asm_file
);
1794 #ifdef ASM_IDENTIFY_LANGUAGE
1795 /* Routine to build language identifier for object file. */
1798 output_lang_identify (asm_out_file
)
1801 int len
= strlen (lang_identify ()) + sizeof ("__gnu_compiled_") + 1;
1802 char *s
= (char *) alloca (len
);
1804 sprintf (s
, "__gnu_compiled_%s", lang_identify ());
1805 ASM_OUTPUT_LABEL (asm_out_file
, s
);
1809 /* Routine to open a dump file. Return true if the dump file is enabled. */
1812 open_dump_file (index
, decl
)
1813 enum dump_file_index index
;
1817 const char *open_arg
;
1820 if (! dump_file
[index
].enabled
)
1823 timevar_push (TV_DUMP
);
1824 if (rtl_dump_file
!= NULL
)
1825 fclose (rtl_dump_file
);
1827 sprintf (seq
, ".%02d.", index
);
1829 if (! dump_file
[index
].initialized
)
1831 /* If we've not initialized the files, do so now. */
1832 if (graph_dump_format
!= no_graph
1833 && dump_file
[index
].graph_dump_p
)
1835 dump_name
= concat (seq
, dump_file
[index
].extension
, NULL
);
1836 clean_graph_dump_file (dump_base_name
, dump_name
);
1839 dump_file
[index
].initialized
= 1;
1845 dump_name
= concat (dump_base_name
, seq
,
1846 dump_file
[index
].extension
, NULL
);
1848 rtl_dump_file
= fopen (dump_name
, open_arg
);
1849 if (rtl_dump_file
== NULL
)
1850 pfatal_with_name (dump_name
);
1855 fprintf (rtl_dump_file
, "\n;; Function %s\n\n",
1856 decl_printable_name (decl
, 2));
1858 timevar_pop (TV_DUMP
);
1862 /* Routine to close a dump file. */
1865 close_dump_file (index
, func
, insns
)
1866 enum dump_file_index index
;
1867 void (*func
) PARAMS ((FILE *, rtx
));
1870 if (! rtl_dump_file
)
1873 timevar_push (TV_DUMP
);
1875 && graph_dump_format
!= no_graph
1876 && dump_file
[index
].graph_dump_p
)
1881 sprintf (seq
, ".%02d.", index
);
1882 suffix
= concat (seq
, dump_file
[index
].extension
, NULL
);
1883 print_rtl_graph_with_bb (dump_base_name
, suffix
, insns
);
1888 func (rtl_dump_file
, insns
);
1890 fflush (rtl_dump_file
);
1891 fclose (rtl_dump_file
);
1893 rtl_dump_file
= NULL
;
1894 timevar_pop (TV_DUMP
);
1897 /* Do any final processing required for the declarations in VEC, of
1898 which there are LEN. We write out inline functions and variables
1899 that have been deferred until this point, but which are required.
1900 Returns non-zero if anything was put out. */
1903 wrapup_global_declarations (vec
, len
)
1910 int output_something
= 0;
1912 for (i
= 0; i
< len
; i
++)
1916 /* We're not deferring this any longer. */
1917 DECL_DEFER_OUTPUT (decl
) = 0;
1919 if (TREE_CODE (decl
) == VAR_DECL
&& DECL_SIZE (decl
) == 0
1920 && incomplete_decl_finalize_hook
!= 0)
1921 (*incomplete_decl_finalize_hook
) (decl
);
1924 /* Now emit any global variables or functions that we have been
1925 putting off. We need to loop in case one of the things emitted
1926 here references another one which comes earlier in the list. */
1930 for (i
= 0; i
< len
; i
++)
1934 if (TREE_ASM_WRITTEN (decl
) || DECL_EXTERNAL (decl
))
1937 /* Don't write out static consts, unless we still need them.
1939 We also keep static consts if not optimizing (for debugging),
1940 unless the user specified -fno-keep-static-consts.
1941 ??? They might be better written into the debug information.
1942 This is possible when using DWARF.
1944 A language processor that wants static constants to be always
1945 written out (even if it is not used) is responsible for
1946 calling rest_of_decl_compilation itself. E.g. the C front-end
1947 calls rest_of_decl_compilation from finish_decl.
1948 One motivation for this is that is conventional in some
1949 environments to write things like:
1950 static const char rcsid[] = "... version string ...";
1951 intending to force the string to be in the executable.
1953 A language processor that would prefer to have unneeded
1954 static constants "optimized away" would just defer writing
1955 them out until here. E.g. C++ does this, because static
1956 constants are often defined in header files.
1958 ??? A tempting alternative (for both C and C++) would be
1959 to force a constant to be written if and only if it is
1960 defined in a main file, as opposed to an include file. */
1962 if (TREE_CODE (decl
) == VAR_DECL
&& TREE_STATIC (decl
)
1963 && (! TREE_READONLY (decl
)
1964 || TREE_PUBLIC (decl
)
1966 && flag_keep_static_consts
1967 && !DECL_ARTIFICIAL (decl
))
1968 || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl
))))
1971 rest_of_decl_compilation (decl
, NULL_PTR
, 1, 1);
1974 if (TREE_CODE (decl
) == FUNCTION_DECL
1975 && DECL_INITIAL (decl
) != 0
1976 && DECL_SAVED_INSNS (decl
) != 0
1977 && (flag_keep_inline_functions
1978 || (TREE_PUBLIC (decl
) && !DECL_COMDAT (decl
))
1979 || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl
))))
1982 output_inline_function (decl
);
1987 output_something
= 1;
1991 return output_something
;
1994 /* Issue appropriate warnings for the global declarations in VEC (of
1995 which there are LEN). Output debugging information for them. */
1998 check_global_declarations (vec
, len
)
2005 for (i
= 0; i
< len
; i
++)
2009 if (TREE_CODE (decl
) == VAR_DECL
&& TREE_STATIC (decl
)
2010 && ! TREE_ASM_WRITTEN (decl
))
2011 /* Cancel the RTL for this decl so that, if debugging info
2012 output for global variables is still to come,
2013 this one will be omitted. */
2014 DECL_RTL (decl
) = NULL
;
2016 /* Warn about any function
2017 declared static but not defined.
2018 We don't warn about variables,
2019 because many programs have static variables
2020 that exist only to get some text into the object file. */
2021 if (TREE_CODE (decl
) == FUNCTION_DECL
2022 && (warn_unused_function
2023 || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl
)))
2024 && DECL_INITIAL (decl
) == 0
2025 && DECL_EXTERNAL (decl
)
2026 && ! DECL_ARTIFICIAL (decl
)
2027 && ! TREE_PUBLIC (decl
))
2029 if (TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl
)))
2030 pedwarn_with_decl (decl
,
2031 "`%s' used but never defined");
2033 warning_with_decl (decl
,
2034 "`%s' declared `static' but never defined");
2035 /* This symbol is effectively an "extern" declaration now. */
2036 TREE_PUBLIC (decl
) = 1;
2037 assemble_external (decl
);
2040 /* Warn about static fns or vars defined but not used,
2041 but not about inline functions or static consts
2042 since defining those in header files is normal practice. */
2043 if (((warn_unused_function
2044 && TREE_CODE (decl
) == FUNCTION_DECL
&& ! DECL_INLINE (decl
))
2045 || (warn_unused_variable
2046 && TREE_CODE (decl
) == VAR_DECL
&& ! TREE_READONLY (decl
)))
2047 && ! DECL_IN_SYSTEM_HEADER (decl
)
2048 && ! DECL_EXTERNAL (decl
)
2049 && ! TREE_PUBLIC (decl
)
2050 && ! TREE_USED (decl
)
2051 && (TREE_CODE (decl
) == FUNCTION_DECL
|| ! DECL_REGISTER (decl
))
2052 /* The TREE_USED bit for file-scope decls
2053 is kept in the identifier, to handle multiple
2054 external decls in different scopes. */
2055 && ! TREE_USED (DECL_NAME (decl
)))
2056 warning_with_decl (decl
, "`%s' defined but not used");
2058 timevar_push (TV_SYMOUT
);
2059 #ifdef SDB_DEBUGGING_INFO
2060 /* The COFF linker can move initialized global vars to the end.
2061 And that can screw up the symbol ordering.
2062 By putting the symbols in that order to begin with,
2063 we avoid a problem. mcsun!unido!fauern!tumuc!pes@uunet.uu.net. */
2064 if (write_symbols
== SDB_DEBUG
&& TREE_CODE (decl
) == VAR_DECL
2065 && TREE_PUBLIC (decl
) && DECL_INITIAL (decl
)
2066 && ! DECL_EXTERNAL (decl
)
2067 && DECL_RTL (decl
) != 0)
2068 sdbout_symbol (decl
, 0);
2070 /* Output COFF information for non-global
2071 file-scope initialized variables. */
2072 if (write_symbols
== SDB_DEBUG
2073 && TREE_CODE (decl
) == VAR_DECL
2074 && DECL_INITIAL (decl
)
2075 && ! DECL_EXTERNAL (decl
)
2076 && DECL_RTL (decl
) != 0
2077 && GET_CODE (DECL_RTL (decl
)) == MEM
)
2078 sdbout_toplevel_data (decl
);
2079 #endif /* SDB_DEBUGGING_INFO */
2080 #ifdef DWARF_DEBUGGING_INFO
2081 /* Output DWARF information for file-scope tentative data object
2082 declarations, file-scope (extern) function declarations (which
2083 had no corresponding body) and file-scope tagged type declarations
2084 and definitions which have not yet been forced out. */
2086 if (write_symbols
== DWARF_DEBUG
2087 && (TREE_CODE (decl
) != FUNCTION_DECL
|| !DECL_INITIAL (decl
)))
2088 dwarfout_file_scope_decl (decl
, 1);
2090 #ifdef DWARF2_DEBUGGING_INFO
2091 /* Output DWARF2 information for file-scope tentative data object
2092 declarations, file-scope (extern) function declarations (which
2093 had no corresponding body) and file-scope tagged type declarations
2094 and definitions which have not yet been forced out. */
2096 if (write_symbols
== DWARF2_DEBUG
2097 && (TREE_CODE (decl
) != FUNCTION_DECL
|| !DECL_INITIAL (decl
)))
2098 dwarf2out_decl (decl
);
2100 timevar_pop (TV_SYMOUT
);
2104 /* Save the current INPUT_FILENAME and LINENO on the top entry in the
2105 INPUT_FILE_STACK. Push a new entry for FILE and LINE, and set the
2106 INPUT_FILENAME and LINENO accordingly. */
2109 push_srcloc (file
, line
)
2113 struct file_stack
*fs
;
2115 if (input_file_stack
)
2117 input_file_stack
->name
= input_filename
;
2118 input_file_stack
->line
= lineno
;
2121 fs
= (struct file_stack
*) xmalloc (sizeof (struct file_stack
));
2122 fs
->name
= input_filename
= file
;
2123 fs
->line
= lineno
= line
;
2124 fs
->indent_level
= 0;
2125 fs
->next
= input_file_stack
;
2126 input_file_stack
= fs
;
2127 input_file_stack_tick
++;
2130 /* Pop the top entry off the stack of presently open source files.
2131 Restore the INPUT_FILENAME and LINENO from the new topmost entry on
2137 struct file_stack
*fs
;
2139 fs
= input_file_stack
;
2140 input_file_stack
= fs
->next
;
2142 input_file_stack_tick
++;
2143 /* The initial source file is never popped. */
2144 if (!input_file_stack
)
2146 input_filename
= input_file_stack
->name
;
2147 lineno
= input_file_stack
->line
;
2150 /* Compile an entire file of output from cpp, named NAME.
2151 Write a file of assembly output and various debugging dumps. */
2159 int name_specified
= name
!= 0;
2161 if (dump_base_name
== 0)
2162 dump_base_name
= name
? name
: "gccdump";
2167 /* Start timing total execution time. */
2170 timevar_start (TV_TOTAL
);
2172 /* Initialize data in various passes. */
2175 name
= init_parse (name
);
2176 init_emit_once (debug_info_level
== DINFO_LEVEL_NORMAL
2177 || debug_info_level
== DINFO_LEVEL_VERBOSE
2178 || flag_test_coverage
2179 || warn_notreached
);
2182 init_decl_processing ();
2188 init_function_once ();
2189 init_stor_layout_once ();
2190 init_varasm_once ();
2192 /* The following initialization functions need to generate rtl, so
2193 provide a dummy function context for them. */
2194 init_dummy_function_start ();
2197 if (flag_caller_saves
)
2198 init_caller_save ();
2199 expand_dummy_function_end ();
2201 /* If auxiliary info generation is desired, open the output file.
2202 This goes in the same directory as the source file--unlike
2203 all the other output files. */
2204 if (flag_gen_aux_info
)
2206 aux_info_file
= fopen (aux_info_file_name
, "w");
2207 if (aux_info_file
== 0)
2208 pfatal_with_name (aux_info_file_name
);
2211 /* Open assembler code output file. Do this even if -fsyntax-only is on,
2212 because then the driver will have provided the name of a temporary
2213 file or bit bucket for us. */
2215 if (! name_specified
&& asm_file_name
== 0)
2216 asm_out_file
= stdout
;
2219 if (asm_file_name
== 0)
2221 int len
= strlen (dump_base_name
);
2222 char *dumpname
= (char *) xmalloc (len
+ 6);
2223 memcpy (dumpname
, dump_base_name
, len
+ 1);
2224 strip_off_ending (dumpname
, len
);
2225 strcat (dumpname
, ".s");
2226 asm_file_name
= dumpname
;
2228 if (!strcmp (asm_file_name
, "-"))
2229 asm_out_file
= stdout
;
2231 asm_out_file
= fopen (asm_file_name
, "w");
2232 if (asm_out_file
== 0)
2233 pfatal_with_name (asm_file_name
);
2236 #ifdef IO_BUFFER_SIZE
2237 setvbuf (asm_out_file
, (char *) xmalloc (IO_BUFFER_SIZE
),
2238 _IOFBF
, IO_BUFFER_SIZE
);
2242 name
= ggc_strdup (name
);
2244 input_filename
= name
;
2246 /* Put an entry on the input file stack for the main input file. */
2247 push_srcloc (input_filename
, 0);
2249 /* Perform language-specific initialization.
2250 This may set main_input_filename. */
2251 if (lang_hooks
.init
)
2252 (*lang_hooks
.init
) ();
2254 /* If the input doesn't start with a #line, use the input name
2255 as the official input file name. */
2256 if (main_input_filename
== 0)
2257 main_input_filename
= name
;
2259 if (flag_syntax_only
)
2261 write_symbols
= NO_DEBUG
;
2263 profile_block_flag
= 0;
2267 ASM_FILE_START (asm_out_file
);
2269 #ifdef ASM_COMMENT_START
2270 if (flag_verbose_asm
)
2272 /* Print the list of options in effect. */
2273 print_version (asm_out_file
, ASM_COMMENT_START
);
2274 print_switch_values (asm_out_file
, 0, MAX_LINE
,
2275 ASM_COMMENT_START
, " ", "\n");
2276 /* Add a blank line here so it appears in assembler output but not
2278 fprintf (asm_out_file
, "\n");
2282 /* Output something to inform GDB that this compilation was by GCC. */
2283 #ifndef ASM_IDENTIFY_GCC
2284 fprintf (asm_out_file
, "gcc2_compiled.:\n");
2286 ASM_IDENTIFY_GCC (asm_out_file
);
2289 /* Output something to identify which front-end produced this file. */
2290 #ifdef ASM_IDENTIFY_LANGUAGE
2291 ASM_IDENTIFY_LANGUAGE (asm_out_file
);
2293 } /* ! flag_syntax_only */
2295 #ifndef ASM_OUTPUT_SECTION_NAME
2296 if (flag_function_sections
)
2298 warning ("-ffunction-sections not supported for this target.");
2299 flag_function_sections
= 0;
2301 if (flag_data_sections
)
2303 warning ("-fdata-sections not supported for this target.");
2304 flag_data_sections
= 0;
2308 if (flag_function_sections
2309 && (profile_flag
|| profile_block_flag
))
2311 warning ("-ffunction-sections disabled; it makes profiling impossible.");
2312 flag_function_sections
= 0;
2315 #ifndef OBJECT_FORMAT_ELF
2316 if (flag_function_sections
&& write_symbols
!= NO_DEBUG
)
2317 warning ("-ffunction-sections may affect debugging on some targets.");
2320 /* ??? Note: There used to be a conditional here
2321 to call assemble_zeros without fail if DBX_DEBUGGING_INFO is defined.
2322 This was to guarantee separation between gcc_compiled. and
2323 the first function, for the sake of dbx on Suns.
2324 However, having the extra zero here confused the Emacs
2325 code for unexec, and might confuse other programs too.
2326 Therefore, I took out that change.
2327 In future versions we should find another way to solve
2328 that dbx problem. -- rms, 23 May 93. */
2330 /* Don't let the first function fall at the same address
2331 as gcc_compiled., if profiling. */
2332 if (profile_flag
|| profile_block_flag
)
2334 /* It's best if we can write a nop here since some
2335 assemblers don't tolerate zeros in the text section. */
2336 output_asm_insn (get_insn_template (CODE_FOR_nop
, NULL
), NULL_PTR
);
2339 /* If dbx symbol table desired, initialize writing it
2340 and output the predefined types. */
2341 timevar_push (TV_SYMOUT
);
2342 #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
2343 if (write_symbols
== DBX_DEBUG
|| write_symbols
== XCOFF_DEBUG
)
2344 dbxout_init (asm_out_file
, main_input_filename
, getdecls ());
2346 #ifdef SDB_DEBUGGING_INFO
2347 if (write_symbols
== SDB_DEBUG
)
2348 sdbout_init (asm_out_file
, main_input_filename
, getdecls ());
2350 #ifdef DWARF_DEBUGGING_INFO
2351 if (write_symbols
== DWARF_DEBUG
)
2352 dwarfout_init (asm_out_file
, main_input_filename
);
2354 #ifdef DWARF2_UNWIND_INFO
2355 if (dwarf2out_do_frame ())
2356 dwarf2out_frame_init ();
2358 #ifdef DWARF2_DEBUGGING_INFO
2359 if (write_symbols
== DWARF2_DEBUG
)
2360 dwarf2out_init (asm_out_file
, main_input_filename
);
2362 timevar_pop (TV_SYMOUT
);
2364 /* Initialize yet another pass. */
2366 init_final (main_input_filename
);
2367 init_branch_prob (dump_base_name
);
2369 timevar_push (TV_PARSE
);
2371 /* Call the parser, which parses the entire file
2372 (calling rest_of_compilation for each function). */
2374 if (yyparse () != 0)
2376 if (errorcount
== 0)
2377 fnotice (stderr
, "Errors detected in input file (your bison.simple is out of date)\n");
2379 /* In case there were missing closebraces,
2380 get us back to the global binding level. */
2381 while (! global_bindings_p ())
2385 /* Compilation is now finished except for writing
2386 what's left of the symbol table output. */
2388 timevar_pop (TV_PARSE
);
2390 if (flag_syntax_only
)
2393 globals
= getdecls ();
2395 /* Really define vars that have had only a tentative definition.
2396 Really output inline functions that must actually be callable
2397 and have not been output so far. */
2400 int len
= list_length (globals
);
2401 tree
*vec
= (tree
*) xmalloc (sizeof (tree
) * len
);
2405 /* Process the decls in reverse order--earliest first.
2406 Put them into VEC from back to front, then take out from front. */
2408 for (i
= 0, decl
= globals
; i
< len
; i
++, decl
= TREE_CHAIN (decl
))
2409 vec
[len
- i
- 1] = decl
;
2411 wrapup_global_declarations (vec
, len
);
2413 /* This must occur after the loop to output deferred functions. Else
2414 the profiler initializer would not be emitted if all the functions
2415 in this compilation unit were deferred.
2417 output_func_start_profiler can not cause any additional functions or
2418 data to need to be output, so it need not be in the deferred function
2420 output_func_start_profiler ();
2422 /* Now that all possible functions have been output, we can dump
2423 the exception table. */
2425 #ifndef IA64_UNWIND_INFO
2426 output_exception_table ();
2428 free_exception_table ();
2430 check_global_declarations (vec
, len
);
2436 /* Write out any pending weak symbol declarations. */
2440 /* Do dbx symbols. */
2441 timevar_push (TV_SYMOUT
);
2442 #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
2443 if (write_symbols
== DBX_DEBUG
|| write_symbols
== XCOFF_DEBUG
)
2444 dbxout_finish (asm_out_file
, main_input_filename
);
2447 #ifdef DWARF_DEBUGGING_INFO
2448 if (write_symbols
== DWARF_DEBUG
)
2452 #ifdef DWARF2_UNWIND_INFO
2453 if (dwarf2out_do_frame ())
2454 dwarf2out_frame_finish ();
2457 #ifdef DWARF2_DEBUGGING_INFO
2458 if (write_symbols
== DWARF2_DEBUG
)
2459 dwarf2out_finish ();
2461 timevar_pop (TV_SYMOUT
);
2463 /* Output some stuff at end of file if nec. */
2465 end_final (dump_base_name
);
2467 if (profile_arc_flag
|| flag_test_coverage
|| flag_branch_probabilities
)
2469 timevar_push (TV_DUMP
);
2470 open_dump_file (DFI_bp
, NULL
);
2474 close_dump_file (DFI_bp
, NULL
, NULL_RTX
);
2475 timevar_pop (TV_DUMP
);
2479 ASM_FILE_END (asm_out_file
);
2482 /* Language-specific end of compilation actions. */
2484 if (lang_hooks
.finish
)
2485 (*lang_hooks
.finish
) ();
2487 /* Close the dump files. */
2489 if (flag_gen_aux_info
)
2491 fclose (aux_info_file
);
2493 unlink (aux_info_file_name
);
2496 if (optimize
> 0 && open_dump_file (DFI_combine
, NULL
))
2498 timevar_push (TV_DUMP
);
2499 dump_combine_total_stats (rtl_dump_file
);
2500 close_dump_file (DFI_combine
, NULL
, NULL_RTX
);
2501 timevar_pop (TV_DUMP
);
2504 /* Close non-debugging input and output files. Take special care to note
2505 whether fclose returns an error, since the pages might still be on the
2506 buffer chain while the file is open. */
2510 if (ferror (asm_out_file
) != 0 || fclose (asm_out_file
) != 0)
2511 fatal_io_error (asm_file_name
);
2513 /* Do whatever is necessary to finish printing the graphs. */
2514 if (graph_dump_format
!= no_graph
)
2518 for (i
= 0; i
< DFI_MAX
; ++i
)
2519 if (dump_file
[i
].initialized
&& dump_file
[i
].graph_dump_p
)
2524 sprintf (seq
, ".%02d.", i
);
2525 suffix
= concat (seq
, dump_file
[i
].extension
, NULL
);
2526 finish_graph_dump_file (dump_base_name
, suffix
);
2533 ggc_print_statistics ();
2534 stringpool_statistics ();
2537 /* Free up memory for the benefit of leak detectors. */
2540 /* Stop timing total execution time. */
2541 timevar_stop (TV_TOTAL
);
2543 /* Print the times. */
2545 timevar_print (stderr
);
2548 /* This is called from various places for FUNCTION_DECL, VAR_DECL,
2549 and TYPE_DECL nodes.
2551 This does nothing for local (non-static) variables, unless the
2552 variable is a register variable with an ASMSPEC. In that case, or
2553 if the variable is not an automatice, it sets up the RTL and
2554 outputs any assembler code (label definition, storage allocation
2555 and initialization).
2557 DECL is the declaration. If ASMSPEC is nonzero, it specifies
2558 the assembler symbol name to be used. TOP_LEVEL is nonzero
2559 if this declaration is not within a function. */
2562 rest_of_decl_compilation (decl
, asmspec
, top_level
, at_end
)
2564 const char *asmspec
;
2568 /* Declarations of variables, and of functions defined elsewhere. */
2570 /* The most obvious approach, to put an #ifndef around where
2571 this macro is used, doesn't work since it's inside a macro call. */
2572 #ifndef ASM_FINISH_DECLARE_OBJECT
2573 #define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP, END)
2576 /* Forward declarations for nested functions are not "external",
2577 but we need to treat them as if they were. */
2578 if (TREE_STATIC (decl
) || DECL_EXTERNAL (decl
)
2579 || TREE_CODE (decl
) == FUNCTION_DECL
)
2581 timevar_push (TV_VARCONST
);
2582 make_decl_rtl (decl
, asmspec
, top_level
);
2583 /* Initialized extern variable exists to be replaced
2584 with its value, or represents something that will be
2585 output in another file. */
2586 if (! (TREE_CODE (decl
) == VAR_DECL
2587 && DECL_EXTERNAL (decl
) && TREE_READONLY (decl
)
2588 && DECL_INITIAL (decl
) != 0
2589 && DECL_INITIAL (decl
) != error_mark_node
))
2590 /* Don't output anything
2591 when a tentative file-scope definition is seen.
2592 But at end of compilation, do output code for them. */
2593 if (! (! at_end
&& top_level
2594 && (DECL_INITIAL (decl
) == 0
2595 || DECL_INITIAL (decl
) == error_mark_node
)))
2596 assemble_variable (decl
, top_level
, at_end
, 0);
2597 if (decl
== last_assemble_variable_decl
)
2599 ASM_FINISH_DECLARE_OBJECT (asm_out_file
, decl
,
2602 timevar_pop (TV_VARCONST
);
2604 else if (DECL_REGISTER (decl
) && asmspec
!= 0)
2606 if (decode_reg_name (asmspec
) >= 0)
2608 DECL_RTL (decl
) = 0;
2609 make_decl_rtl (decl
, asmspec
, top_level
);
2613 error ("invalid register name `%s' for register variable", asmspec
);
2614 DECL_REGISTER (decl
) = 0;
2615 make_decl_rtl (decl
, NULL
, top_level
);
2618 #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
2619 else if ((write_symbols
== DBX_DEBUG
|| write_symbols
== XCOFF_DEBUG
)
2620 && TREE_CODE (decl
) == TYPE_DECL
)
2622 timevar_push (TV_SYMOUT
);
2623 dbxout_symbol (decl
, 0);
2624 timevar_pop (TV_SYMOUT
);
2627 #ifdef SDB_DEBUGGING_INFO
2628 else if (write_symbols
== SDB_DEBUG
&& top_level
2629 && TREE_CODE (decl
) == TYPE_DECL
)
2631 timevar_push (TV_SYMOUT
);
2632 sdbout_symbol (decl
, 0);
2633 timevar_pop (TV_SYMOUT
);
2638 /* Called after finishing a record, union or enumeral type. */
2641 rest_of_type_compilation (type
, toplev
)
2642 #if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO) || defined (SDB_DEBUGGING_INFO)
2646 tree type ATTRIBUTE_UNUSED
;
2647 int toplev ATTRIBUTE_UNUSED
;
2650 timevar_push (TV_SYMOUT
);
2651 #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
2652 if (write_symbols
== DBX_DEBUG
|| write_symbols
== XCOFF_DEBUG
)
2653 dbxout_symbol (TYPE_STUB_DECL (type
), !toplev
);
2655 #ifdef SDB_DEBUGGING_INFO
2656 if (write_symbols
== SDB_DEBUG
)
2657 sdbout_symbol (TYPE_STUB_DECL (type
), !toplev
);
2659 #ifdef DWARF2_DEBUGGING_INFO
2660 if (write_symbols
== DWARF2_DEBUG
&& toplev
)
2661 dwarf2out_decl (TYPE_STUB_DECL (type
));
2663 timevar_pop (TV_SYMOUT
);
2666 /* DECL is an inline function, whose body is present, but which is not
2667 being output at this point. (We're putting that off until we need
2668 to do it.) If there are any actions that need to take place,
2669 including the emission of debugging information for the function,
2670 this is where they should go. This function may be called by
2671 language-dependent code for front-ends that do not even generate
2672 RTL for functions that don't need to be put out. */
2675 note_deferral_of_defined_inline_function (decl
)
2676 tree decl ATTRIBUTE_UNUSED
;
2678 #ifdef DWARF_DEBUGGING_INFO
2679 /* Generate the DWARF info for the "abstract" instance of a function
2680 which we may later generate inlined and/or out-of-line instances
2682 if (write_symbols
== DWARF_DEBUG
&& DECL_INLINE (decl
))
2684 /* The front-end may not have set CURRENT_FUNCTION_DECL, but the
2685 DWARF code expects it to be set in this case. Intuitively,
2686 DECL is the function we just finished defining, so setting
2687 CURRENT_FUNCTION_DECL is sensible. */
2688 tree saved_cfd
= current_function_decl
;
2689 current_function_decl
= decl
;
2691 /* Let the DWARF code do its work. */
2692 set_decl_abstract_flags (decl
, 1);
2693 dwarfout_file_scope_decl (decl
, 0);
2694 set_decl_abstract_flags (decl
, 0);
2696 /* Reset CURRENT_FUNCTION_DECL. */
2697 current_function_decl
= saved_cfd
;
2702 /* This is called from finish_function (within yyparse)
2703 after each top-level definition is parsed.
2704 It is supposed to compile that function or variable
2705 and output the assembler code for it.
2706 After we return, the tree storage is freed. */
2709 rest_of_compilation (decl
)
2715 int rebuild_label_notes_after_reload
;
2716 int register_life_up_to_date
;
2718 timevar_push (TV_REST_OF_COMPILATION
);
2720 /* Now that we're out of the frontend, we shouldn't have any more
2721 CONCATs anywhere. */
2722 generating_concat_p
= 0;
2724 /* When processing delayed functions, prepare_function_start() won't
2725 have been run to re-initialize it. */
2726 cse_not_expected
= ! optimize
;
2728 /* First, make sure that NOTE_BLOCK is set correctly for each
2729 NOTE_INSN_BLOCK_BEG/NOTE_INSN_BLOCK_END note. */
2730 if (!cfun
->x_whole_function_mode_p
)
2733 /* Then remove any notes we don't need. That will make iterating
2734 over the instruction sequence faster, and allow the garbage
2735 collector to reclaim the memory used by the notes. */
2736 remove_unnecessary_notes ();
2738 /* In function-at-a-time mode, we do not attempt to keep the BLOCK
2739 tree in sensible shape. So, we just recalculate it here. */
2740 if (cfun
->x_whole_function_mode_p
)
2745 /* If we are reconsidering an inline function
2746 at the end of compilation, skip the stuff for making it inline. */
2748 if (DECL_SAVED_INSNS (decl
) == 0)
2754 /* If this is nested inside an inlined external function, pretend
2755 it was only declared. Since we cannot inline such functions,
2756 generating code for this one is not only not necessary but will
2757 confuse some debugging output writers. */
2758 for (parent
= DECL_CONTEXT (current_function_decl
);
2759 parent
!= NULL_TREE
;
2760 parent
= get_containing_scope (parent
))
2761 if (TREE_CODE (parent
) == FUNCTION_DECL
2762 && DECL_INLINE (parent
) && DECL_EXTERNAL (parent
))
2764 DECL_INITIAL (decl
) = 0;
2765 goto exit_rest_of_compilation
;
2768 /* If requested, consider whether to make this function inline. */
2769 if (DECL_INLINE (decl
) || flag_inline_functions
)
2771 timevar_push (TV_INTEGRATION
);
2772 lose
= function_cannot_inline_p (decl
);
2773 timevar_pop (TV_INTEGRATION
);
2774 if (lose
|| ! optimize
)
2776 if (warn_inline
&& DECL_INLINE (decl
))
2777 warning_with_decl (decl
, lose
);
2778 DECL_ABSTRACT_ORIGIN (decl
) = 0;
2779 /* Don't really compile an extern inline function.
2780 If we can't make it inline, pretend
2781 it was only declared. */
2782 if (DECL_EXTERNAL (decl
))
2784 DECL_INITIAL (decl
) = 0;
2785 goto exit_rest_of_compilation
;
2789 /* ??? Note that this has the effect of making it look
2790 like "inline" was specified for a function if we choose
2791 to inline it. This isn't quite right, but it's
2792 probably not worth the trouble to fix. */
2793 inlinable
= DECL_INLINE (decl
) = 1;
2796 insns
= get_insns ();
2798 /* Dump the rtl code if we are dumping rtl. */
2800 if (open_dump_file (DFI_rtl
, decl
))
2802 if (DECL_SAVED_INSNS (decl
))
2803 fprintf (rtl_dump_file
, ";; (integrable)\n\n");
2804 close_dump_file (DFI_rtl
, print_rtl
, insns
);
2807 /* If function is inline, and we don't yet know whether to
2808 compile it by itself, defer decision till end of compilation.
2809 finish_compilation will call rest_of_compilation again
2810 for those functions that need to be output. Also defer those
2811 functions that we are supposed to defer. */
2814 || (DECL_INLINE (decl
)
2815 && ((! TREE_PUBLIC (decl
) && ! TREE_ADDRESSABLE (decl
)
2816 && ! flag_keep_inline_functions
)
2817 || DECL_EXTERNAL (decl
))))
2818 DECL_DEFER_OUTPUT (decl
) = 1;
2820 if (DECL_INLINE (decl
))
2821 /* DWARF wants seperate debugging info for abstract and
2822 concrete instances of all inline functions, including those
2823 declared inline but not inlined, and those inlined even
2824 though they weren't declared inline. Conveniently, that's
2825 what DECL_INLINE means at this point. */
2826 note_deferral_of_defined_inline_function (decl
);
2828 if (DECL_DEFER_OUTPUT (decl
))
2830 /* If -Wreturn-type, we have to do a bit of compilation. We just
2831 want to call jump_optimize to figure out whether or not we can
2832 fall off the end of the function; we do the minimum amount of
2833 work necessary to make that safe. And, we set optimize to zero
2834 to keep jump_optimize from working too hard. */
2835 if (warn_return_type
)
2837 int saved_optimize
= optimize
;
2840 find_exception_handler_labels ();
2841 jump_optimize (insns
, !JUMP_CROSS_JUMP
, !JUMP_NOOP_MOVES
,
2842 !JUMP_AFTER_REGSCAN
);
2843 optimize
= saved_optimize
;
2846 current_function_nothrow
= nothrow_function_p ();
2847 if (current_function_nothrow
)
2848 /* Now we know that this can't throw; set the flag for the benefit
2849 of other functions later in this translation unit. */
2850 TREE_NOTHROW (current_function_decl
) = 1;
2852 timevar_push (TV_INTEGRATION
);
2853 save_for_inline (decl
);
2854 timevar_pop (TV_INTEGRATION
);
2855 DECL_SAVED_INSNS (decl
)->inlinable
= inlinable
;
2856 goto exit_rest_of_compilation
;
2859 /* If specified extern inline but we aren't inlining it, we are
2860 done. This goes for anything that gets here with DECL_EXTERNAL
2861 set, not just things with DECL_INLINE. */
2862 if (DECL_EXTERNAL (decl
))
2863 goto exit_rest_of_compilation
;
2866 init_EXPR_INSN_LIST_cache ();
2870 /* Initialize some variables used by the optimizers. */
2871 init_function_for_compilation ();
2873 if (! DECL_DEFER_OUTPUT (decl
))
2874 TREE_ASM_WRITTEN (decl
) = 1;
2876 /* Now that integrate will no longer see our rtl, we need not
2877 distinguish between the return value of this function and the
2878 return value of called functions. Also, we can remove all SETs
2879 of subregs of hard registers; they are only here because of
2881 rtx_equal_function_value_matters
= 0;
2882 purge_hard_subreg_sets (get_insns ());
2884 /* Don't return yet if -Wreturn-type; we need to do jump_optimize. */
2885 if ((rtl_dump_and_exit
|| flag_syntax_only
) && !warn_return_type
)
2886 goto exit_rest_of_compilation
;
2888 /* Emit code to get eh context, if needed. */
2891 /* We may have potential sibling or tail recursion sites. Select one
2892 (of possibly multiple) methods of performing the call. */
2893 if (flag_optimize_sibling_calls
)
2895 timevar_push (TV_JUMP
);
2896 open_dump_file (DFI_sibling
, decl
);
2898 optimize_sibling_and_tail_recursive_calls ();
2900 close_dump_file (DFI_sibling
, print_rtl
, get_insns ());
2901 timevar_pop (TV_JUMP
);
2905 /* If we are doing position-independent code generation, now
2906 is the time to output special prologues and epilogues.
2907 We do not want to do this earlier, because it just clutters
2908 up inline functions with meaningless insns. */
2913 insns
= get_insns ();
2915 /* Copy any shared structure that should not be shared. */
2916 unshare_all_rtl (current_function_decl
, insns
);
2918 #ifdef SETJMP_VIA_SAVE_AREA
2919 /* This must be performed before virutal register instantiation. */
2920 if (current_function_calls_alloca
)
2921 optimize_save_area_alloca (insns
);
2924 /* Instantiate all virtual registers. */
2925 instantiate_virtual_regs (current_function_decl
, insns
);
2927 /* Find all the EH handlers. */
2928 find_exception_handler_labels ();
2930 open_dump_file (DFI_jump
, decl
);
2932 /* Always do one jump optimization pass to ensure that JUMP_LABEL fields
2933 are initialized and to compute whether control can drop off the end
2936 timevar_push (TV_JUMP
);
2937 /* Turn NOTE_INSN_EXPECTED_VALUE into REG_BR_PROB. Do this
2938 before jump optimization switches branch directions. */
2939 expected_value_to_br_prob ();
2941 reg_scan (insns
, max_reg_num (), 0);
2942 jump_optimize (insns
, !JUMP_CROSS_JUMP
, !JUMP_NOOP_MOVES
,
2943 JUMP_AFTER_REGSCAN
);
2945 timevar_pop (TV_JUMP
);
2947 /* Now is when we stop if -fsyntax-only and -Wreturn-type. */
2948 if (rtl_dump_and_exit
|| flag_syntax_only
|| DECL_DEFER_OUTPUT (decl
))
2950 close_dump_file (DFI_jump
, print_rtl
, insns
);
2951 goto exit_rest_of_compilation
;
2954 timevar_push (TV_JUMP
);
2958 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
2959 cleanup_cfg (insns
);
2961 /* ??? Run if-conversion before delete_null_pointer_checks,
2962 since the later does not preserve the CFG. This should
2963 be changed -- no since converting if's that are going to
2965 timevar_push (TV_IFCVT
);
2967 timevar_pop (TV_IFCVT
);
2969 /* Try to identify useless null pointer tests and delete them. */
2970 if (flag_delete_null_pointer_checks
)
2971 delete_null_pointer_checks (insns
);
2974 /* Jump optimization, and the removal of NULL pointer checks, may
2975 have reduced the number of instructions substantially. CSE, and
2976 future passes, allocate arrays whose dimensions involve the
2977 maximum instruction UID, so if we can reduce the maximum UID
2978 we'll save big on memory. */
2979 renumber_insns (rtl_dump_file
);
2980 timevar_pop (TV_JUMP
);
2982 close_dump_file (DFI_jump
, print_rtl
, insns
);
2986 /* Perform common subexpression elimination.
2987 Nonzero value from `cse_main' means that jumps were simplified
2988 and some code may now be unreachable, so do
2989 jump optimization again. */
2993 open_dump_file (DFI_cse
, decl
);
2994 timevar_push (TV_CSE
);
2996 reg_scan (insns
, max_reg_num (), 1);
2998 if (flag_thread_jumps
)
3000 timevar_push (TV_JUMP
);
3001 thread_jumps (insns
, max_reg_num (), 1);
3002 timevar_pop (TV_JUMP
);
3005 tem
= cse_main (insns
, max_reg_num (), 0, rtl_dump_file
);
3007 /* If we are not running the second CSE pass, then we are no longer
3008 expecting CSE to be run. */
3009 cse_not_expected
= !flag_rerun_cse_after_loop
;
3011 if (tem
|| optimize
> 1)
3013 timevar_push (TV_JUMP
);
3014 jump_optimize (insns
, !JUMP_CROSS_JUMP
, !JUMP_NOOP_MOVES
,
3015 !JUMP_AFTER_REGSCAN
);
3016 timevar_pop (TV_JUMP
);
3019 /* Run this after jump optmizations remove all the unreachable code
3020 so that unreachable code will not keep values live. */
3021 delete_trivially_dead_insns (insns
, max_reg_num ());
3023 /* Try to identify useless null pointer tests and delete them. */
3024 if (flag_delete_null_pointer_checks
)
3026 timevar_push (TV_JUMP
);
3027 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3029 cleanup_cfg (insns
);
3031 delete_null_pointer_checks (insns
);
3032 timevar_pop (TV_JUMP
);
3035 /* The second pass of jump optimization is likely to have
3036 removed a bunch more instructions. */
3037 renumber_insns (rtl_dump_file
);
3039 timevar_pop (TV_CSE
);
3040 close_dump_file (DFI_cse
, print_rtl
, insns
);
3043 open_dump_file (DFI_addressof
, decl
);
3045 purge_addressof (insns
);
3046 reg_scan (insns
, max_reg_num (), 1);
3048 close_dump_file (DFI_addressof
, print_rtl
, insns
);
3052 if (optimize
> 0 && flag_ssa
)
3054 /* Convert to SSA form. */
3056 timevar_push (TV_TO_SSA
);
3057 open_dump_file (DFI_ssa
, decl
);
3059 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3060 cleanup_cfg (insns
);
3063 close_dump_file (DFI_ssa
, print_rtl_with_bb
, insns
);
3064 timevar_pop (TV_TO_SSA
);
3066 /* The SSA implementation uses basic block numbers in its phi
3067 nodes. Thus, changing the control-flow graph or the basic
3068 blocks, e.g., calling find_basic_blocks () or cleanup_cfg (),
3069 may cause problems. */
3073 /* Remove dead code. */
3075 timevar_push (TV_DEAD_CODE_ELIM
);
3076 open_dump_file (DFI_dce
, decl
);
3078 insns
= get_insns ();
3079 eliminate_dead_code();
3081 close_dump_file (DFI_dce
, print_rtl_with_bb
, insns
);
3082 timevar_pop (TV_DEAD_CODE_ELIM
);
3085 /* Convert from SSA form. */
3087 timevar_push (TV_FROM_SSA
);
3088 open_dump_file (DFI_ussa
, decl
);
3090 convert_from_ssa ();
3091 /* New registers have been created. Rescan their usage. */
3092 reg_scan (insns
, max_reg_num (), 1);
3093 /* Life analysis used in SSA adds log_links but these
3094 shouldn't be there until the flow stage, so clear
3096 clear_log_links (insns
);
3098 close_dump_file (DFI_ussa
, print_rtl_with_bb
, insns
);
3099 timevar_pop (TV_FROM_SSA
);
3104 /* Perform global cse. */
3106 if (optimize
> 0 && flag_gcse
)
3108 timevar_push (TV_GCSE
);
3109 open_dump_file (DFI_gcse
, decl
);
3111 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3112 cleanup_cfg (insns
);
3113 tem
= gcse_main (insns
, rtl_dump_file
);
3115 /* If gcse altered any jumps, rerun jump optimizations to clean
3119 timevar_push (TV_JUMP
);
3120 jump_optimize (insns
, !JUMP_CROSS_JUMP
, !JUMP_NOOP_MOVES
,
3121 !JUMP_AFTER_REGSCAN
);
3122 timevar_pop (TV_JUMP
);
3125 close_dump_file (DFI_gcse
, print_rtl
, insns
);
3126 timevar_pop (TV_GCSE
);
3131 /* Move constant computations out of loops. */
3135 timevar_push (TV_LOOP
);
3136 open_dump_file (DFI_loop
, decl
);
3138 if (flag_rerun_loop_opt
)
3140 /* We only want to perform unrolling once. */
3142 loop_optimize (insns
, rtl_dump_file
, 0);
3144 /* The first call to loop_optimize makes some instructions
3145 trivially dead. We delete those instructions now in the
3146 hope that doing so will make the heuristics in loop work
3147 better and possibly speed up compilation. */
3148 delete_trivially_dead_insns (insns
, max_reg_num ());
3150 /* The regscan pass is currently necessary as the alias
3151 analysis code depends on this information. */
3152 reg_scan (insns
, max_reg_num (), 1);
3154 loop_optimize (insns
, rtl_dump_file
,
3155 (flag_unroll_loops
? LOOP_UNROLL
: 0) | LOOP_BCT
);
3157 close_dump_file (DFI_loop
, print_rtl
, insns
);
3158 timevar_pop (TV_LOOP
);
3165 timevar_push (TV_CSE2
);
3166 open_dump_file (DFI_cse2
, decl
);
3168 if (flag_rerun_cse_after_loop
)
3170 /* Running another jump optimization pass before the second
3171 cse pass sometimes simplifies the RTL enough to allow
3172 the second CSE pass to do a better job. Jump_optimize can change
3173 max_reg_num so we must rerun reg_scan afterwards.
3174 ??? Rework to not call reg_scan so often. */
3175 timevar_push (TV_JUMP
);
3177 reg_scan (insns
, max_reg_num (), 0);
3178 jump_optimize (insns
, !JUMP_CROSS_JUMP
,
3179 !JUMP_NOOP_MOVES
, JUMP_AFTER_REGSCAN
);
3181 timevar_push (TV_IFCVT
);
3183 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3184 cleanup_cfg (insns
);
3187 timevar_pop(TV_IFCVT
);
3189 timevar_pop (TV_JUMP
);
3191 reg_scan (insns
, max_reg_num (), 0);
3192 tem
= cse_main (insns
, max_reg_num (), 1, rtl_dump_file
);
3196 timevar_push (TV_JUMP
);
3197 jump_optimize (insns
, !JUMP_CROSS_JUMP
,
3198 !JUMP_NOOP_MOVES
, !JUMP_AFTER_REGSCAN
);
3199 timevar_pop (TV_JUMP
);
3203 if (flag_thread_jumps
)
3205 /* This pass of jump threading straightens out code
3206 that was kinked by loop optimization. */
3207 timevar_push (TV_JUMP
);
3208 reg_scan (insns
, max_reg_num (), 0);
3209 thread_jumps (insns
, max_reg_num (), 0);
3210 timevar_pop (TV_JUMP
);
3213 close_dump_file (DFI_cse2
, print_rtl
, insns
);
3214 timevar_pop (TV_CSE2
);
3219 cse_not_expected
= 1;
3223 /* Do control and data flow analysis; wrote some of the results to
3226 timevar_push (TV_FLOW
);
3227 open_dump_file (DFI_cfg
, decl
);
3229 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3230 cleanup_cfg (insns
);
3231 check_function_return_warnings ();
3233 close_dump_file (DFI_cfg
, print_rtl_with_bb
, insns
);
3235 if (profile_arc_flag
|| flag_test_coverage
|| flag_branch_probabilities
)
3237 timevar_push (TV_BRANCH_PROB
);
3238 open_dump_file (DFI_bp
, decl
);
3242 close_dump_file (DFI_bp
, print_rtl_with_bb
, insns
);
3243 timevar_pop (TV_BRANCH_PROB
);
3246 open_dump_file (DFI_life
, decl
);
3251 /* Discover and record the loop depth at the head of each basic
3252 block. The loop infrastructure does the real job for us. */
3253 flow_loops_find (&loops
, LOOP_TREE
);
3255 /* Estimate using heuristics if no profiling info is available. */
3256 estimate_probability (&loops
);
3259 flow_loops_dump (&loops
, rtl_dump_file
, NULL
, 0);
3261 flow_loops_free (&loops
);
3263 life_analysis (insns
, rtl_dump_file
, PROP_FINAL
);
3264 mark_constant_function ();
3265 timevar_pop (TV_FLOW
);
3267 register_life_up_to_date
= 1;
3270 if (warn_uninitialized
|| extra_warnings
)
3272 uninitialized_vars_warning (DECL_INITIAL (decl
));
3274 setjmp_args_warning ();
3277 close_dump_file (DFI_life
, print_rtl_with_bb
, insns
);
3281 /* If -opt, try combining insns through substitution. */
3285 int rebuild_jump_labels_after_combine
= 0;
3287 timevar_push (TV_COMBINE
);
3288 open_dump_file (DFI_combine
, decl
);
3290 rebuild_jump_labels_after_combine
3291 = combine_instructions (insns
, max_reg_num ());
3293 /* Combining insns may have turned an indirect jump into a
3294 direct jump. Rebuid the JUMP_LABEL fields of jumping
3296 if (rebuild_jump_labels_after_combine
)
3298 timevar_push (TV_JUMP
);
3299 rebuild_jump_labels (insns
);
3300 timevar_pop (TV_JUMP
);
3302 timevar_push (TV_FLOW
);
3303 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3304 cleanup_cfg (insns
);
3306 /* Blimey. We've got to have the CFG up to date for the call to
3307 if_convert below. However, the random deletion of blocks
3308 without updating life info can wind up with Wierd Stuff in
3309 global_live_at_end. We then run sched1, which updates things
3310 properly, discovers the wierdness and aborts. */
3311 update_life_info (NULL
, UPDATE_LIFE_GLOBAL_RM_NOTES
,
3312 PROP_DEATH_NOTES
| PROP_KILL_DEAD_CODE
3313 | PROP_SCAN_DEAD_CODE
);
3315 timevar_pop (TV_FLOW
);
3318 close_dump_file (DFI_combine
, print_rtl_with_bb
, insns
);
3319 timevar_pop (TV_COMBINE
);
3324 /* Rerun if-conversion, as combine may have simplified things enough to
3325 now meet sequence length restrictions. */
3328 timevar_push (TV_IFCVT
);
3329 open_dump_file (DFI_ce
, decl
);
3335 close_dump_file (DFI_ce
, print_rtl_with_bb
, insns
);
3336 timevar_pop (TV_IFCVT
);
3339 /* Register allocation pre-pass, to reduce number of moves
3340 necessary for two-address machines. */
3341 if (optimize
> 0 && (flag_regmove
|| flag_expensive_optimizations
))
3343 timevar_push (TV_REGMOVE
);
3344 open_dump_file (DFI_regmove
, decl
);
3346 regmove_optimize (insns
, max_reg_num (), rtl_dump_file
);
3348 close_dump_file (DFI_regmove
, print_rtl_with_bb
, insns
);
3349 timevar_pop (TV_REGMOVE
);
3354 /* Any of the several passes since flow1 will have munged register
3355 lifetime data a bit. */
3357 register_life_up_to_date
= 0;
3359 #ifdef OPTIMIZE_MODE_SWITCHING
3360 timevar_push (TV_GCSE
);
3362 if (optimize_mode_switching (NULL_PTR
))
3364 /* We did work, and so had to regenerate global life information.
3365 Take advantage of this and don't re-recompute register life
3366 information below. */
3367 register_life_up_to_date
= 1;
3370 timevar_pop (TV_GCSE
);
3373 #ifdef INSN_SCHEDULING
3375 /* Print function header into sched dump now
3376 because doing the sched analysis makes some of the dump. */
3377 if (optimize
> 0 && flag_schedule_insns
)
3379 timevar_push (TV_SCHED
);
3380 open_dump_file (DFI_sched
, decl
);
3382 /* Do control and data sched analysis,
3383 and write some of the results to dump file. */
3385 schedule_insns (rtl_dump_file
);
3387 close_dump_file (DFI_sched
, print_rtl_with_bb
, insns
);
3388 timevar_pop (TV_SCHED
);
3392 /* Register lifetime information was updated as part of verifying
3394 register_life_up_to_date
= 1;
3398 /* Determine if the current function is a leaf before running reload
3399 since this can impact optimizations done by the prologue and
3400 epilogue thus changing register elimination offsets. */
3401 current_function_is_leaf
= leaf_function_p ();
3403 timevar_push (TV_LOCAL_ALLOC
);
3404 open_dump_file (DFI_lreg
, decl
);
3406 /* Allocate pseudo-regs that are used only within 1 basic block.
3408 RUN_JUMP_AFTER_RELOAD records whether or not we need to rerun the
3409 jump optimizer after register allocation and reloading are finished. */
3411 if (! register_life_up_to_date
)
3412 recompute_reg_usage (insns
, ! optimize_size
);
3413 regclass (insns
, max_reg_num (), rtl_dump_file
);
3414 rebuild_label_notes_after_reload
= local_alloc ();
3416 timevar_pop (TV_LOCAL_ALLOC
);
3418 if (dump_file
[DFI_lreg
].enabled
)
3420 timevar_push (TV_DUMP
);
3422 dump_flow_info (rtl_dump_file
);
3423 dump_local_alloc (rtl_dump_file
);
3425 close_dump_file (DFI_lreg
, print_rtl_with_bb
, insns
);
3426 timevar_pop (TV_DUMP
);
3431 timevar_push (TV_GLOBAL_ALLOC
);
3432 open_dump_file (DFI_greg
, decl
);
3434 /* If optimizing, allocate remaining pseudo-regs. Do the reload
3435 pass fixing up any insns that are invalid. */
3438 failure
= global_alloc (rtl_dump_file
);
3441 build_insn_chain (insns
);
3442 failure
= reload (insns
, 0);
3445 timevar_pop (TV_GLOBAL_ALLOC
);
3447 if (dump_file
[DFI_greg
].enabled
)
3449 timevar_push (TV_DUMP
);
3451 dump_global_regs (rtl_dump_file
);
3453 close_dump_file (DFI_greg
, print_rtl_with_bb
, insns
);
3454 timevar_pop (TV_DUMP
);
3458 goto exit_rest_of_compilation
;
3462 open_dump_file (DFI_postreload
, decl
);
3464 /* Do a very simple CSE pass over just the hard registers. */
3467 timevar_push (TV_RELOAD_CSE_REGS
);
3468 reload_cse_regs (insns
);
3469 timevar_pop (TV_RELOAD_CSE_REGS
);
3472 /* If optimizing, then go ahead and split insns now since we are about
3473 to recompute flow information anyway. */
3476 int old_labelnum
= max_label_num ();
3478 split_all_insns (0);
3479 rebuild_label_notes_after_reload
|= old_labelnum
!= max_label_num ();
3482 /* Register allocation and reloading may have turned an indirect jump into
3483 a direct jump. If so, we must rebuild the JUMP_LABEL fields of
3484 jumping instructions. */
3485 if (rebuild_label_notes_after_reload
)
3487 timevar_push (TV_JUMP
);
3489 rebuild_jump_labels (insns
);
3491 timevar_pop (TV_JUMP
);
3494 close_dump_file (DFI_postreload
, print_rtl_with_bb
, insns
);
3496 /* Re-create the death notes which were deleted during reload. */
3497 timevar_push (TV_FLOW2
);
3498 open_dump_file (DFI_flow2
, decl
);
3500 jump_optimize (insns
, !JUMP_CROSS_JUMP
,
3501 JUMP_NOOP_MOVES
, !JUMP_AFTER_REGSCAN
);
3502 find_basic_blocks (insns
, max_reg_num (), rtl_dump_file
);
3504 /* On some machines, the prologue and epilogue code, or parts thereof,
3505 can be represented as RTL. Doing so lets us schedule insns between
3506 it and the rest of the code and also allows delayed branch
3507 scheduling to operate in the epilogue. */
3508 thread_prologue_and_epilogue_insns (insns
);
3512 cleanup_cfg (insns
);
3513 life_analysis (insns
, rtl_dump_file
, PROP_FINAL
);
3515 /* This is kind of a heuristic. We need to run combine_stack_adjustments
3516 even for machines with possibly nonzero RETURN_POPS_ARGS
3517 and ACCUMULATE_OUTGOING_ARGS. We expect that only ports having
3518 push instructions will have popping returns. */
3519 #ifndef PUSH_ROUNDING
3520 if (!ACCUMULATE_OUTGOING_ARGS
)
3522 combine_stack_adjustments ();
3527 flow2_completed
= 1;
3529 close_dump_file (DFI_flow2
, print_rtl_with_bb
, insns
);
3530 timevar_pop (TV_FLOW2
);
3532 #ifdef HAVE_peephole2
3533 if (optimize
> 0 && flag_peephole2
)
3535 timevar_push (TV_PEEPHOLE2
);
3536 open_dump_file (DFI_peephole2
, decl
);
3538 peephole2_optimize (rtl_dump_file
);
3540 close_dump_file (DFI_peephole2
, print_rtl_with_bb
, insns
);
3541 timevar_pop (TV_PEEPHOLE2
);
3545 if (optimize
> 0 && flag_rename_registers
)
3547 timevar_push (TV_RENAME_REGISTERS
);
3548 open_dump_file (DFI_rnreg
, decl
);
3550 regrename_optimize ();
3552 close_dump_file (DFI_rnreg
, print_rtl_with_bb
, insns
);
3553 timevar_pop (TV_RENAME_REGISTERS
);
3558 timevar_push (TV_IFCVT2
);
3559 open_dump_file (DFI_ce2
, decl
);
3563 close_dump_file (DFI_ce2
, print_rtl_with_bb
, insns
);
3564 timevar_pop (TV_IFCVT2
);
3567 #ifdef INSN_SCHEDULING
3568 if (optimize
> 0 && flag_schedule_insns_after_reload
)
3570 timevar_push (TV_SCHED2
);
3571 open_dump_file (DFI_sched2
, decl
);
3573 /* Do control and data sched analysis again,
3574 and write some more of the results to dump file. */
3576 schedule_insns (rtl_dump_file
);
3578 close_dump_file (DFI_sched2
, print_rtl_with_bb
, insns
);
3579 timevar_pop (TV_SCHED2
);
3585 #ifdef LEAF_REGISTERS
3586 current_function_uses_only_leaf_regs
3587 = optimize
> 0 && only_leaf_regs_used () && leaf_function_p ();
3590 if (optimize
> 0 && flag_reorder_blocks
)
3592 timevar_push (TV_REORDER_BLOCKS
);
3593 open_dump_file (DFI_bbro
, decl
);
3595 reorder_basic_blocks ();
3597 close_dump_file (DFI_bbro
, print_rtl_with_bb
, insns
);
3598 timevar_pop (TV_REORDER_BLOCKS
);
3601 /* One more attempt to remove jumps to .+1 left by dead-store elimination.
3602 Also do cross-jumping this time and delete no-op move insns. */
3606 timevar_push (TV_JUMP
);
3607 open_dump_file (DFI_jump2
, decl
);
3609 jump_optimize (insns
, JUMP_CROSS_JUMP
, JUMP_NOOP_MOVES
,
3610 !JUMP_AFTER_REGSCAN
);
3612 /* CFG no longer kept up to date. */
3614 close_dump_file (DFI_jump2
, print_rtl
, insns
);
3615 timevar_pop (TV_JUMP
);
3618 /* If a machine dependent reorganization is needed, call it. */
3619 #ifdef MACHINE_DEPENDENT_REORG
3620 open_dump_file (DFI_mach
, decl
);
3622 MACHINE_DEPENDENT_REORG (insns
);
3624 close_dump_file (DFI_mach
, print_rtl
, insns
);
3629 /* If a scheduling pass for delayed branches is to be done,
3630 call the scheduling code. */
3633 if (optimize
> 0 && flag_delayed_branch
)
3635 timevar_push (TV_DBR_SCHED
);
3636 open_dump_file (DFI_dbr
, decl
);
3638 dbr_schedule (insns
, rtl_dump_file
);
3640 close_dump_file (DFI_dbr
, print_rtl
, insns
);
3641 timevar_pop (TV_DBR_SCHED
);
3647 /* Shorten branches.
3649 Note this must run before reg-stack because of death note (ab)use
3650 in the ia32 backend. */
3651 timevar_push (TV_SHORTEN_BRANCH
);
3652 shorten_branches (get_insns ());
3653 timevar_pop (TV_SHORTEN_BRANCH
);
3656 timevar_push (TV_REG_STACK
);
3657 open_dump_file (DFI_stack
, decl
);
3659 reg_to_stack (insns
, rtl_dump_file
);
3661 close_dump_file (DFI_stack
, print_rtl
, insns
);
3662 timevar_pop (TV_REG_STACK
);
3667 current_function_nothrow
= nothrow_function_p ();
3668 if (current_function_nothrow
)
3669 /* Now we know that this can't throw; set the flag for the benefit
3670 of other functions later in this translation unit. */
3671 TREE_NOTHROW (current_function_decl
) = 1;
3673 /* Now turn the rtl into assembler code. */
3675 timevar_push (TV_FINAL
);
3680 /* Get the function's name, as described by its RTL. This may be
3681 different from the DECL_NAME name used in the source file. */
3683 x
= DECL_RTL (decl
);
3684 if (GET_CODE (x
) != MEM
)
3687 if (GET_CODE (x
) != SYMBOL_REF
)
3689 fnname
= XSTR (x
, 0);
3691 assemble_start_function (decl
, fnname
);
3692 final_start_function (insns
, asm_out_file
, optimize
);
3693 final (insns
, asm_out_file
, optimize
, 0);
3694 final_end_function (insns
, asm_out_file
, optimize
);
3695 assemble_end_function (decl
, fnname
);
3697 fflush (asm_out_file
);
3699 /* Release all memory allocated by flow. */
3700 free_basic_block_vars (0);
3702 /* Release all memory held by regsets now. */
3703 regset_release_memory ();
3705 timevar_pop (TV_FINAL
);
3709 /* Write DBX symbols if requested. */
3711 /* Note that for those inline functions where we don't initially
3712 know for certain that we will be generating an out-of-line copy,
3713 the first invocation of this routine (rest_of_compilation) will
3714 skip over this code by doing a `goto exit_rest_of_compilation;'.
3715 Later on, finish_compilation will call rest_of_compilation again
3716 for those inline functions that need to have out-of-line copies
3717 generated. During that call, we *will* be routed past here. */
3719 timevar_push (TV_SYMOUT
);
3720 #ifdef DBX_DEBUGGING_INFO
3721 if (write_symbols
== DBX_DEBUG
)
3722 dbxout_function (decl
);
3725 #ifdef DWARF_DEBUGGING_INFO
3726 if (write_symbols
== DWARF_DEBUG
)
3727 dwarfout_file_scope_decl (decl
, 0);
3730 #ifdef DWARF2_DEBUGGING_INFO
3731 if (write_symbols
== DWARF2_DEBUG
)
3732 dwarf2out_decl (decl
);
3734 timevar_pop (TV_SYMOUT
);
3736 exit_rest_of_compilation
:
3738 /* In case the function was not output,
3739 don't leave any temporary anonymous types
3740 queued up for sdb output. */
3741 #ifdef SDB_DEBUGGING_INFO
3742 if (write_symbols
== SDB_DEBUG
)
3743 sdbout_types (NULL_TREE
);
3746 reload_completed
= 0;
3747 flow2_completed
= 0;
3750 timevar_push (TV_FINAL
);
3752 /* Clear out the insn_length contents now that they are no
3754 init_insn_lengths ();
3756 /* Clear out the real_constant_chain before some of the rtx's
3757 it runs through become garbage. */
3758 clear_const_double_mem ();
3760 /* Show no temporary slots allocated. */
3763 free_basic_block_vars (0);
3765 timevar_pop (TV_FINAL
);
3767 /* Make sure volatile mem refs aren't considered valid operands for
3768 arithmetic insns. We must call this here if this is a nested inline
3769 function, since the above code leaves us in the init_recog state
3770 (from final.c), and the function context push/pop code does not
3771 save/restore volatile_ok.
3773 ??? Maybe it isn't necessary for expand_start_function to call this
3774 anymore if we do it here? */
3776 init_recog_no_volatile ();
3778 /* We're done with this function. Free up memory if we can. */
3779 free_after_parsing (cfun
);
3780 if (! DECL_DEFER_OUTPUT (decl
))
3781 free_after_compilation (cfun
);
3786 timevar_pop (TV_REST_OF_COMPILATION
);
3796 printf (_(" -ffixed-<register> Mark <register> as being unavailable to the compiler\n"));
3797 printf (_(" -fcall-used-<register> Mark <register> as being corrupted by function calls\n"));
3798 printf (_(" -fcall-saved-<register> Mark <register> as being preserved across functions\n"));
3799 printf (_(" -finline-limit=<number> Limits the size of inlined functions to <number>\n"));
3800 printf (_(" -fmessage-length=<number> Limits diagnostics messages lengths to <number> characters per line. 0 suppresses line-wrapping\n"));
3801 printf (_(" -fdiagnostics-show-location=[once | every-line] Indicates how often source location information should be emitted, as prefix, at the beginning of diagnostics when line-wrapping\n"));
3803 for (i
= ARRAY_SIZE (f_options
); i
--;)
3805 const char *description
= f_options
[i
].description
;
3807 if (description
!= NULL
&& * description
!= 0)
3808 printf (" -f%-21s %s\n",
3809 f_options
[i
].string
, description
);
3812 printf (_(" -O[number] Set optimisation level to [number]\n"));
3813 printf (_(" -Os Optimise for space rather than speed\n"));
3814 printf (_(" -pedantic Issue warnings needed by strict compliance to ISO C\n"));
3815 printf (_(" -pedantic-errors Like -pedantic except that errors are produced\n"));
3816 printf (_(" -w Suppress warnings\n"));
3817 printf (_(" -W Enable extra warnings\n"));
3819 for (i
= ARRAY_SIZE (W_options
); i
--;)
3821 const char *description
= W_options
[i
].description
;
3823 if (description
!= NULL
&& * description
!= 0)
3824 printf (" -W%-21s %s\n",
3825 W_options
[i
].string
, description
);
3828 printf (_(" -Wunused Enable unused warnings\n"));
3829 printf (_(" -Wid-clash-<num> Warn if 2 identifiers have the same first <num> chars\n"));
3830 printf (_(" -Wlarger-than-<number> Warn if an object is larger than <number> bytes\n"));
3831 printf (_(" -p Enable function profiling\n"));
3832 #if defined (BLOCK_PROFILER) || defined (FUNCTION_BLOCK_PROFILER)
3833 printf (_(" -a Enable block profiling \n"));
3835 #if defined (BLOCK_PROFILER) || defined (FUNCTION_BLOCK_PROFILER) || defined FUNCTION_BLOCK_PROFILER_EXIT
3836 printf (_(" -ax Enable jump profiling \n"));
3838 printf (_(" -o <file> Place output into <file> \n"));
3840 -G <number> Put global and static data smaller than <number>\n\
3841 bytes into a special section (on some targets)\n"));
3843 for (i
= ARRAY_SIZE (debug_args
); i
--;)
3845 if (debug_args
[i
].description
!= NULL
)
3846 printf (" -g%-21s %s\n",
3847 debug_args
[i
].arg
, debug_args
[i
].description
);
3850 printf (_(" -aux-info <file> Emit declaration info into <file>.X\n"));
3851 printf (_(" -quiet Do not display functions compiled or elapsed time\n"));
3852 printf (_(" -version Display the compiler's version\n"));
3853 printf (_(" -d[letters] Enable dumps from specific passes of the compiler\n"));
3854 printf (_(" -dumpbase <file> Base name to be used for dumps from specific passes\n"));
3855 #if defined INSN_SCHEDULING
3856 printf (_(" -fsched-verbose=<number> Set the verbosity level of the scheduler\n"));
3858 printf (_(" --help Display this information\n"));
3863 /* Display descriptions of language specific options.
3864 If there is no description, note that there is an undocumented option.
3865 If the description is empty, do not display anything. (This allows
3866 options to be deliberately undocumented, for whatever reason).
3867 If the option string is missing, then this is a marker, indicating
3868 that the description string is in fact the name of a language, whose
3869 language specific options are to follow. */
3871 if (ARRAY_SIZE (documented_lang_options
) > 1)
3873 printf (_("\nLanguage specific options:\n"));
3875 for (i
= 0; i
< ARRAY_SIZE (documented_lang_options
); i
++)
3877 const char *description
= documented_lang_options
[i
].description
;
3878 const char *option
= documented_lang_options
[i
].option
;
3880 if (description
== NULL
)
3885 printf (_(" %-23.23s [undocumented]\n"), option
);
3887 else if (*description
== 0)
3889 else if (option
== NULL
)
3893 (_("\nThere are undocumented %s specific options as well.\n"),
3897 printf (_("\n Options for %s:\n"), description
);
3902 printf (" %-23.23s %s\n", option
, description
);
3907 printf (_("\nThere are undocumented %s specific options as well.\n"),
3910 display_target_options ();
3914 display_target_options ()
3918 if (ARRAY_SIZE (target_switches
) > 1
3919 #ifdef TARGET_OPTIONS
3920 || ARRAY_SIZE (target_options
) > 1
3928 printf (_("\nTarget specific options:\n"));
3930 for (i
= ARRAY_SIZE (target_switches
); i
--;)
3932 const char *option
= target_switches
[i
].name
;
3933 const char *description
= target_switches
[i
].description
;
3935 if (option
== NULL
|| *option
== 0)
3937 else if (description
== NULL
)
3942 printf (_(" -m%-23.23s [undocumented]\n"), option
);
3944 else if (* description
!= 0)
3945 doc
+= printf (" -m%-23.23s %s\n", option
, description
);
3948 #ifdef TARGET_OPTIONS
3949 for (i
= ARRAY_SIZE (target_options
); i
--;)
3951 const char *option
= target_options
[i
].prefix
;
3952 const char *description
= target_options
[i
].description
;
3954 if (option
== NULL
|| *option
== 0)
3956 else if (description
== NULL
)
3961 printf (_(" -m%-23.23s [undocumented]\n"), option
);
3963 else if (* description
!= 0)
3964 doc
+= printf (" -m%-23.23s %s\n", option
, description
);
3970 printf (_("\nThere are undocumented target specific options as well.\n"));
3972 printf (_(" They exist, but they are not documented.\n"));
3977 /* Parse a -d... comand line switch. */
3980 decode_d_option (arg
)
3989 for (i
= 0; i
< DFI_MAX
; ++i
)
3990 dump_file
[i
].enabled
= 1;
3999 flag_print_asm_name
= 1;
4002 flag_dump_rtl_in_asm
= 1;
4003 flag_print_asm_name
= 1;
4006 graph_dump_format
= vcg
;
4009 rtl_dump_and_exit
= 1;
4014 case 'D': /* These are handled by the preprocessor. */
4020 for (i
= 0; i
< DFI_MAX
; ++i
)
4021 if (c
== dump_file
[i
].debug_switch
)
4023 dump_file
[i
].enabled
= 1;
4028 warning ("unrecognized gcc debugging option: %c", c
);
4033 /* Parse a -f... comand line switch. ARG is the value after the -f.
4034 It is safe to access 'ARG - 2' to generate the full switch name.
4035 Return the number of strings consumed. */
4038 decode_f_option (arg
)
4042 const char *option_value
= NULL
;
4044 /* Search for the option in the table of binary f options. */
4045 for (j
= ARRAY_SIZE (f_options
); j
--;)
4047 if (!strcmp (arg
, f_options
[j
].string
))
4049 *f_options
[j
].variable
= f_options
[j
].on_value
;
4053 if (arg
[0] == 'n' && arg
[1] == 'o' && arg
[2] == '-'
4054 && ! strcmp (arg
+ 3, f_options
[j
].string
))
4056 *f_options
[j
].variable
= ! f_options
[j
].on_value
;
4061 if ((option_value
= skip_leading_substring (arg
, "inline-limit-"))
4062 || (option_value
= skip_leading_substring (arg
, "inline-limit=")))
4064 read_integral_parameter (option_value
, arg
- 2, inline_max_insns
);
4065 #ifdef INSN_SCHEDULING
4066 else if ((option_value
= skip_leading_substring (arg
, "sched-verbose=")))
4067 fix_sched_param ("verbose", option_value
);
4069 else if ((option_value
= skip_leading_substring (arg
, "fixed-")))
4070 fix_register (option_value
, 1, 1);
4071 else if ((option_value
= skip_leading_substring (arg
, "call-used-")))
4072 fix_register (option_value
, 0, 1);
4073 else if ((option_value
= skip_leading_substring (arg
, "call-saved-")))
4074 fix_register (option_value
, 0, 0);
4075 else if ((option_value
= skip_leading_substring (arg
, "align-loops=")))
4076 align_loops
= read_integral_parameter (option_value
, arg
- 2, align_loops
);
4077 else if ((option_value
= skip_leading_substring (arg
, "align-functions=")))
4079 = read_integral_parameter (option_value
, arg
- 2, align_functions
);
4080 else if ((option_value
= skip_leading_substring (arg
, "align-jumps=")))
4081 align_jumps
= read_integral_parameter (option_value
, arg
- 2, align_jumps
);
4082 else if ((option_value
= skip_leading_substring (arg
, "align-labels=")))
4084 = read_integral_parameter (option_value
, arg
- 2, align_labels
);
4085 else if ((option_value
4086 = skip_leading_substring (arg
, "stack-limit-register=")))
4088 int reg
= decode_reg_name (option_value
);
4090 error ("unrecognized register name `%s'", option_value
);
4092 stack_limit_rtx
= gen_rtx_REG (Pmode
, reg
);
4094 else if ((option_value
4095 = skip_leading_substring (arg
, "stack-limit-symbol=")))
4098 nm
= ggc_strdup (option_value
);
4099 stack_limit_rtx
= gen_rtx_SYMBOL_REF (Pmode
, nm
);
4101 else if ((option_value
4102 = skip_leading_substring (arg
, "message-length=")))
4103 diagnostic_message_length_per_line
=
4104 read_integral_parameter (option_value
, arg
- 2,
4105 diagnostic_message_length_per_line
);
4106 else if ((option_value
4107 = skip_leading_substring (arg
, "diagnostics-show-location=")))
4109 if (!strcmp (option_value
, "once"))
4110 set_message_prefixing_rule (DIAGNOSTICS_SHOW_PREFIX_ONCE
);
4111 else if (!strcmp (option_value
, "every-line"))
4112 set_message_prefixing_rule (DIAGNOSTICS_SHOW_PREFIX_EVERY_LINE
);
4114 error ("Unrecognized option `%s'", arg
- 2);
4116 else if (!strcmp (arg
, "no-stack-limit"))
4117 stack_limit_rtx
= NULL_RTX
;
4118 else if (!strcmp (arg
, "preprocessed"))
4119 /* Recognise this switch but do nothing. This prevents warnings
4120 about an unrecognized switch if cpplib has not been linked in. */
4128 /* Parse a -W... comand line switch. ARG is the value after the -W.
4129 It is safe to access 'ARG - 2' to generate the full switch name.
4130 Return the number of strings consumed. */
4133 decode_W_option (arg
)
4136 const char *option_value
= NULL
;
4139 /* Search for the option in the table of binary W options. */
4141 for (j
= ARRAY_SIZE (W_options
); j
--;)
4143 if (!strcmp (arg
, W_options
[j
].string
))
4145 *W_options
[j
].variable
= W_options
[j
].on_value
;
4149 if (arg
[0] == 'n' && arg
[1] == 'o' && arg
[2] == '-'
4150 && ! strcmp (arg
+ 3, W_options
[j
].string
))
4152 *W_options
[j
].variable
= ! W_options
[j
].on_value
;
4157 if ((option_value
= skip_leading_substring (arg
, "id-clash-")))
4159 id_clash_len
= read_integral_parameter (option_value
, arg
- 2, -1);
4161 if (id_clash_len
!= -1)
4164 else if ((option_value
= skip_leading_substring (arg
, "larger-than-")))
4166 larger_than_size
= read_integral_parameter (option_value
, arg
- 2, -1);
4168 if (larger_than_size
!= -1)
4169 warn_larger_than
= 1;
4171 else if (!strcmp (arg
, "unused"))
4175 else if (!strcmp (arg
, "no-unused"))
4185 /* Parse a -g... comand line switch. ARG is the value after the -g.
4186 It is safe to access 'ARG - 2' to generate the full switch name.
4187 Return the number of strings consumed. */
4190 decode_g_option (arg
)
4194 /* A lot of code assumes write_symbols == NO_DEBUG if the
4195 debugging level is 0 (thus -gstabs1 -gstabs0 would lose track
4196 of what debugging type has been selected). This records the
4197 selected type. It is an error to specify more than one
4199 static enum debug_info_type selected_debug_type
= NO_DEBUG
;
4200 /* Non-zero if debugging format has been explicitly set.
4201 -g and -ggdb don't explicitly set the debugging format so
4202 -gdwarf -g3 is equivalent to -gdwarf3. */
4203 static int type_explicitly_set_p
= 0;
4204 /* Indexed by enum debug_info_type. */
4205 static const char *debug_type_names
[] =
4207 "none", "stabs", "coff", "dwarf-1", "dwarf-2", "xcoff"
4210 /* The maximum admissible debug level value. */
4211 static const unsigned max_debug_level
= 3;
4213 /* Look up ARG in the table. */
4214 for (da
= debug_args
; da
->arg
; da
++)
4216 const int da_len
= strlen (da
->arg
);
4218 if (da_len
== 0 || ! strncmp (arg
, da
->arg
, da_len
))
4220 enum debug_info_type type
= da
->debug_type
;
4221 const char *p
= arg
+ da_len
;
4223 if (*p
&& (*p
< '0' || *p
> '9'))
4226 /* A debug flag without a level defaults to level 2.
4227 Note we do not want to call read_integral_parameter
4228 for that case since it will call atoi which
4231 ??? We may want to generalize the interface to
4232 read_integral_parameter to better handle this case
4233 if this case shows up often. */
4235 level
= read_integral_parameter (p
, 0, max_debug_level
+ 1);
4239 if (da_len
> 1 && *p
&& !strncmp (arg
, "dwarf", da_len
))
4241 error ("use -gdwarf -g%d for DWARF v1, level %d",
4244 error ("use -gdwarf-2 for DWARF v2");
4247 if (level
> max_debug_level
)
4250 ignoring option `%s' due to invalid debug level specification",
4252 level
= debug_info_level
;
4255 if (type
== NO_DEBUG
)
4257 type
= PREFERRED_DEBUGGING_TYPE
;
4259 if (da_len
> 1 && strncmp (arg
, "gdb", da_len
) == 0)
4261 #if defined (DWARF2_DEBUGGING_INFO) && !defined (LINKER_DOES_NOT_WORK_WITH_DWARF2)
4262 type
= DWARF2_DEBUG
;
4264 #ifdef DBX_DEBUGGING_INFO
4271 if (type
== NO_DEBUG
)
4272 warning ("`%s': unknown or unsupported -g option", arg
- 2);
4274 /* Does it conflict with an already selected type? */
4275 if (type_explicitly_set_p
4276 /* -g/-ggdb don't conflict with anything. */
4277 && da
->debug_type
!= NO_DEBUG
4278 && type
!= selected_debug_type
)
4279 warning ("`%s' ignored, conflicts with `-g%s'",
4280 arg
- 2, debug_type_names
[(int) selected_debug_type
]);
4283 /* If the format has already been set, -g/-ggdb
4284 only change the debug level. */
4285 if (type_explicitly_set_p
&& da
->debug_type
== NO_DEBUG
)
4286 /* Don't change debugging type. */
4290 selected_debug_type
= type
;
4291 type_explicitly_set_p
= da
->debug_type
!= NO_DEBUG
;
4294 write_symbols
= (level
== 0
4296 : selected_debug_type
);
4297 use_gnu_debug_info_extensions
= da
->use_extensions_p
;
4298 debug_info_level
= (enum debug_info_level
) level
;
4311 /* Decode the first argument in the argv as a language-independent option.
4312 Return the number of strings consumed. */
4315 independent_decode_option (argc
, argv
)
4319 char *arg
= argv
[0];
4321 if (arg
[0] != '-' || arg
[1] == 0)
4333 if (!strcmp (arg
, "-help"))
4339 if (!strcmp (arg
, "-target-help"))
4341 display_target_options ();
4345 if (!strcmp (arg
, "-version"))
4347 print_version (stderr
, "");
4360 /* Already been treated in main (). Do nothing. */
4364 set_target_switch (arg
+ 1);
4368 return decode_f_option (arg
+ 1);
4371 return decode_g_option (arg
+ 1);
4374 if (!strcmp (arg
, "dumpbase"))
4379 dump_base_name
= argv
[1];
4383 decode_d_option (arg
+ 1);
4387 if (!strcmp (arg
, "pedantic"))
4389 else if (!strcmp (arg
, "pedantic-errors"))
4390 flag_pedantic_errors
= pedantic
= 1;
4391 else if (arg
[1] == 0)
4398 if (!strcmp (arg
, "quiet"))
4405 if (!strcmp (arg
, "version"))
4413 inhibit_warnings
= 1;
4422 /* We save the value of warn_uninitialized, since if they put
4423 -Wuninitialized on the command line, we need to generate a
4424 warning about not using it without also specifying -O. */
4425 if (warn_uninitialized
!= 1)
4426 warn_uninitialized
= 2;
4429 return decode_W_option (arg
+ 1);
4435 #if !defined (BLOCK_PROFILER) || !defined (FUNCTION_BLOCK_PROFILER)
4436 warning ("`-a' option (basic block profile) not supported");
4438 profile_block_flag
= (profile_block_flag
< 2) ? 1 : 3;
4441 else if (!strcmp (arg
, "ax"))
4443 #if !defined (FUNCTION_BLOCK_PROFILER_EXIT) || !defined (BLOCK_PROFILER) || !defined (FUNCTION_BLOCK_PROFILER)
4444 warning ("`-ax' option (jump profiling) not supported");
4446 profile_block_flag
= (!profile_block_flag
4447 || profile_block_flag
== 2) ? 2 : 3;
4450 else if (!strncmp (arg
, "aux-info", 8))
4452 flag_gen_aux_info
= 1;
4458 aux_info_file_name
= argv
[1];
4462 aux_info_file_name
= arg
+ 8;
4474 asm_file_name
= argv
[1];
4489 g_switch_val
= read_integral_parameter (argv
[1], 0, -1);
4494 g_switch_val
= read_integral_parameter (arg
+ 1, 0, -1);
4498 if (g_switch_val
== -1)
4502 g_switch_set
= TRUE
;
4503 g_switch_value
= g_switch_val
;
4513 /* Entry point of cc1/c++. Decode command args, then call compile_file.
4514 Exit code is 35 if can't open files, 34 if fatal error,
4515 33 if had nonfatal errors, else success. */
4517 extern int main
PARAMS ((int, char **));
4527 /* save in case md file wants to emit args as a comment. */
4531 p
= argv
[0] + strlen (argv
[0]);
4532 while (p
!= argv
[0] && !IS_DIR_SEPARATOR (p
[-1]))
4536 xmalloc_set_program_name (progname
);
4538 /* LC_CTYPE determines the character set used by the terminal so it has be set
4539 to output messages correctly. */
4541 #ifdef HAVE_LC_MESSAGES
4542 setlocale (LC_CTYPE
, "");
4543 setlocale (LC_MESSAGES
, "");
4545 setlocale (LC_ALL
, "");
4548 (void) bindtextdomain (PACKAGE
, localedir
);
4549 (void) textdomain (PACKAGE
);
4551 /* Install handler for SIGFPE, which may be received while we do
4552 compile-time floating point arithmetic. */
4553 signal (SIGFPE
, float_signal
);
4555 /* Trap fatal signals, e.g. SIGSEGV, and convert them to ICE messages. */
4557 signal (SIGSEGV
, crash_signal
);
4560 signal (SIGILL
, crash_signal
);
4563 signal (SIGBUS
, crash_signal
);
4566 signal (SIGABRT
, crash_signal
);
4568 #if defined SIGIOT && (!defined SIGABRT || SIGABRT != SIGIOT)
4569 signal (SIGIOT
, crash_signal
);
4572 decl_printable_name
= decl_name
;
4573 lang_expand_expr
= (lang_expand_expr_t
) do_abort
;
4575 /* Initialize whether `char' is signed. */
4576 flag_signed_char
= DEFAULT_SIGNED_CHAR
;
4577 #ifdef DEFAULT_SHORT_ENUMS
4578 /* Initialize how much space enums occupy, by default. */
4579 flag_short_enums
= DEFAULT_SHORT_ENUMS
;
4582 /* Initialize the garbage-collector. */
4585 ggc_add_rtx_root (&stack_limit_rtx
, 1);
4586 ggc_add_tree_root (¤t_function_decl
, 1);
4587 ggc_add_tree_root (¤t_function_func_begin_label
, 1);
4589 /* Initialize the diagnostics reporting machinery. */
4590 initialize_diagnostics ();
4592 /* Perform language-specific options intialization. */
4593 if (lang_hooks
.init_options
)
4594 (*lang_hooks
.init_options
) ();
4596 /* Scan to see what optimization level has been specified. That will
4597 determine the default value of many flags. */
4598 for (i
= 1; i
< argc
; i
++)
4600 if (!strcmp (argv
[i
], "-O"))
4605 else if (argv
[i
][0] == '-' && argv
[i
][1] == 'O')
4607 /* Handle -Os, -O2, -O3, -O69, ... */
4608 char *p
= &argv
[i
][2];
4610 if ((p
[0] == 's') && (p
[1] == 0))
4614 /* Optimizing for size forces optimize to be 2. */
4619 const int optimize_val
= read_integral_parameter (p
, p
- 2, -1);
4620 if (optimize_val
!= -1)
4622 optimize
= optimize_val
;
4632 flag_thread_jumps
= 1;
4634 flag_delayed_branch
= 1;
4636 #ifdef CAN_DEBUG_WITHOUT_FP
4637 flag_omit_frame_pointer
= 1;
4643 flag_optimize_sibling_calls
= 1;
4644 flag_cse_follow_jumps
= 1;
4645 flag_cse_skip_blocks
= 1;
4647 flag_expensive_optimizations
= 1;
4648 flag_strength_reduce
= 1;
4649 flag_rerun_cse_after_loop
= 1;
4650 flag_rerun_loop_opt
= 1;
4651 flag_caller_saves
= 1;
4654 #ifdef INSN_SCHEDULING
4655 flag_schedule_insns
= 1;
4656 flag_schedule_insns_after_reload
= 1;
4659 flag_strict_aliasing
= 1;
4660 flag_delete_null_pointer_checks
= 1;
4661 flag_reorder_blocks
= 1;
4666 flag_inline_functions
= 1;
4667 flag_rename_registers
= 1;
4670 if (optimize
< 2 || optimize_size
)
4675 align_functions
= 1;
4678 /* Initialize target_flags before OPTIMIZATION_OPTIONS so the latter can
4681 set_target_switch ("");
4683 /* Unwind tables are always present in an ABI-conformant IA-64
4684 object file, so the default should be ON. */
4685 #ifdef IA64_UNWIND_INFO
4686 flag_unwind_tables
= IA64_UNWIND_INFO
;
4689 #ifdef OPTIMIZATION_OPTIONS
4690 /* Allow default optimizations to be specified on a per-machine basis. */
4691 OPTIMIZATION_OPTIONS (optimize
, optimize_size
);
4694 /* Initialize register usage now so switches may override. */
4697 /* Perform normal command line switch decoding. */
4698 for (i
= 1; i
< argc
;)
4700 unsigned int lang_processed
;
4701 unsigned int indep_processed
;
4703 /* Give the language a chance to decode the option for itself. */
4704 lang_processed
= (*lang_hooks
.decode_option
) (argc
- i
, argv
+ i
);
4706 /* Now see if the option also has a language independent meaning.
4707 Some options are both language specific and language independent,
4709 indep_processed
= independent_decode_option (argc
- i
, argv
+ i
);
4711 if (lang_processed
|| indep_processed
)
4712 i
+= MAX (lang_processed
, indep_processed
);
4715 const char *option
= NULL
;
4716 const char *lang
= NULL
;
4719 /* It is possible that the command line switch is not valid for the
4720 current language, but it is valid for another language. In order
4721 to be compatible with previous versions of the compiler (which
4722 did not issue an error message in this case) we check for this
4723 possibility here. If we do find a match, then if extra_warnings
4724 is set we generate a warning message, otherwise we will just
4725 ignore the option. */
4726 for (j
= 0; j
< ARRAY_SIZE (documented_lang_options
); j
++)
4728 option
= documented_lang_options
[j
].option
;
4731 lang
= documented_lang_options
[j
].description
;
4732 else if (! strncmp (argv
[i
], option
, strlen (option
)))
4736 if (j
!= ARRAY_SIZE (documented_lang_options
))
4740 warning ("Ignoring command line option '%s'", argv
[i
]);
4743 ("(It is valid for %s but not the selected language)",
4747 else if (argv
[i
][0] == '-' && argv
[i
][1] == 'g')
4748 warning ("`%s': unknown or unsupported -g option", &argv
[i
][2]);
4750 error ("Unrecognized option `%s'", argv
[i
]);
4756 /* All command line options have been processed. */
4757 if (lang_hooks
.post_options
)
4758 (*lang_hooks
.post_options
) ();
4760 /* Reflect any language-specific diagnostic option setting. */
4761 reshape_diagnostic_buffer ();
4763 /* Checker uses the frame pointer. */
4764 if (flag_check_memory_usage
)
4765 flag_omit_frame_pointer
= 0;
4769 /* Inlining does not work if not optimizing,
4770 so force it not to be done. */
4774 /* The c_decode_option function and decode_option hook set
4775 this to `2' if -Wall is used, so we can avoid giving out
4776 lots of errors for people who don't realize what -Wall does. */
4777 if (warn_uninitialized
== 1)
4778 warning ("-Wuninitialized is not supported without -O");
4781 #ifdef OVERRIDE_OPTIONS
4782 /* Some machines may reject certain combinations of options. */
4786 if (exceptions_via_longjmp
== 2)
4788 #ifdef DWARF2_UNWIND_INFO
4789 exceptions_via_longjmp
= ! DWARF2_UNWIND_INFO
;
4791 #ifdef IA64_UNWIND_INFO
4792 exceptions_via_longjmp
= ! IA64_UNWIND_INFO
;
4794 exceptions_via_longjmp
= 1;
4799 /* Since each function gets its own handler data, we can't support the
4800 new model currently, since it depend on a specific rethrow label
4801 which is declared at the front of the table, and we can only
4802 have one such symbol in a file. */
4803 #ifdef IA64_UNWIND_INFO
4804 flag_new_exceptions
= 0;
4807 /* Set up the align_*_log variables, defaulting them to 1 if they
4808 were still unset. */
4809 if (align_loops
<= 0) align_loops
= 1;
4810 align_loops_log
= floor_log2 (align_loops
* 2 - 1);
4811 if (align_jumps
<= 0) align_jumps
= 1;
4812 align_jumps_log
= floor_log2 (align_jumps
* 2 - 1);
4813 if (align_labels
<= 0) align_labels
= 1;
4814 align_labels_log
= floor_log2 (align_labels
* 2 - 1);
4815 if (align_functions
<= 0) align_functions
= 1;
4816 align_functions_log
= floor_log2 (align_functions
* 2 - 1);
4818 if (profile_block_flag
== 3)
4820 warning ("`-ax' and `-a' are conflicting options. `-a' ignored.");
4821 profile_block_flag
= 2;
4824 /* Unrolling all loops implies that standard loop unrolling must also
4826 if (flag_unroll_all_loops
)
4827 flag_unroll_loops
= 1;
4828 /* Loop unrolling requires that strength_reduction be on also. Silently
4829 turn on strength reduction here if it isn't already on. Also, the loop
4830 unrolling code assumes that cse will be run after loop, so that must
4831 be turned on also. */
4832 if (flag_unroll_loops
)
4834 flag_strength_reduce
= 1;
4835 flag_rerun_cse_after_loop
= 1;
4838 /* Warn about options that are not supported on this machine. */
4839 #ifndef INSN_SCHEDULING
4840 if (flag_schedule_insns
|| flag_schedule_insns_after_reload
)
4841 warning ("instruction scheduling not supported on this target machine");
4844 if (flag_delayed_branch
)
4845 warning ("this target machine does not have delayed branches");
4848 user_label_prefix
= USER_LABEL_PREFIX
;
4849 if (flag_leading_underscore
!= -1)
4851 /* If the default prefix is more complicated than "" or "_",
4852 issue a warning and ignore this option. */
4853 if (user_label_prefix
[0] == 0 ||
4854 (user_label_prefix
[0] == '_' && user_label_prefix
[1] == 0))
4856 user_label_prefix
= flag_leading_underscore
? "_" : "";
4859 warning ("-f%sleading-underscore not supported on this target machine",
4860 flag_leading_underscore
? "" : "no-");
4863 /* If we are in verbose mode, write out the version and maybe all the
4864 option flags in use. */
4867 print_version (stderr
, "");
4869 print_switch_values (stderr
, 0, MAX_LINE
, "", " ", "\n");
4872 compile_file (filename
);
4874 #if !defined(OS2) && !defined(VMS) && (!defined(_WIN32) || defined (__CYGWIN__)) && !defined(__INTERIX)
4877 char *lim
= (char *) sbrk (0);
4879 fnotice (stderr
, "Data size %ld.\n", (long) (lim
- (char *) &environ
));
4884 system ("ps -l 1>&2");
4887 #endif /* not USG */
4890 #endif /* ! OS2 && ! VMS && (! _WIN32 || CYGWIN) && ! __INTERIX */
4893 return (FATAL_EXIT_CODE
);
4895 return (FATAL_EXIT_CODE
);
4896 return (SUCCESS_EXIT_CODE
);
4899 /* Decode -m switches. */
4900 /* Decode the switch -mNAME. */
4903 set_target_switch (name
)
4907 int valid_target_option
= 0;
4909 for (j
= 0; j
< ARRAY_SIZE (target_switches
); j
++)
4910 if (!strcmp (target_switches
[j
].name
, name
))
4912 if (target_switches
[j
].value
< 0)
4913 target_flags
&= ~-target_switches
[j
].value
;
4915 target_flags
|= target_switches
[j
].value
;
4916 valid_target_option
= 1;
4919 #ifdef TARGET_OPTIONS
4920 if (!valid_target_option
)
4921 for (j
= 0; j
< ARRAY_SIZE (target_options
); j
++)
4923 int len
= strlen (target_options
[j
].prefix
);
4924 if (!strncmp (target_options
[j
].prefix
, name
, len
))
4926 *target_options
[j
].variable
= name
+ len
;
4927 valid_target_option
= 1;
4932 if (!valid_target_option
)
4933 error ("Invalid option `%s'", name
);
4936 /* Print version information to FILE.
4937 Each line begins with INDENT (for the case where FILE is the
4938 assembler output file). */
4941 print_version (file
, indent
)
4946 #define __VERSION__ "[?]"
4950 "%s%s%s version %s (%s)\n%s\tcompiled by GNU C version %s.\n"
4952 "%s%s%s version %s (%s) compiled by CC.\n"
4954 , indent
, *indent
!= 0 ? " " : "",
4955 language_string
, version_string
, TARGET_NAME
,
4956 indent
, __VERSION__
);
4959 /* Print an option value and return the adjusted position in the line.
4960 ??? We don't handle error returns from fprintf (disk full); presumably
4961 other code will catch a disk full though. */
4964 print_single_switch (file
, pos
, max
, indent
, sep
, term
, type
, name
)
4967 const char *indent
, *sep
, *term
, *type
, *name
;
4969 /* The ultrix fprintf returns 0 on success, so compute the result we want
4970 here since we need it for the following test. */
4971 int len
= strlen (sep
) + strlen (type
) + strlen (name
);
4976 fprintf (file
, "%s", term
);
4981 fprintf (file
, "%s", indent
);
4982 pos
= strlen (indent
);
4984 fprintf (file
, "%s%s%s", sep
, type
, name
);
4989 /* Print active target switches to FILE.
4990 POS is the current cursor position and MAX is the size of a "line".
4991 Each line begins with INDENT and ends with TERM.
4992 Each switch is separated from the next by SEP. */
4995 print_switch_values (file
, pos
, max
, indent
, sep
, term
)
4998 const char *indent
, *sep
, *term
;
5003 /* Print the options as passed. */
5005 pos
= print_single_switch (file
, pos
, max
, indent
, *indent
? " " : "", term
,
5006 _("options passed: "), "");
5008 for (p
= &save_argv
[1]; *p
!= NULL
; p
++)
5012 if (strcmp (*p
, "-o") == 0)
5018 if (strcmp (*p
, "-quiet") == 0)
5020 if (strcmp (*p
, "-version") == 0)
5025 pos
= print_single_switch (file
, pos
, max
, indent
, sep
, term
, *p
, "");
5028 fprintf (file
, "%s", term
);
5030 /* Print the -f and -m options that have been enabled.
5031 We don't handle language specific options but printing argv
5034 pos
= print_single_switch (file
, 0, max
, indent
, *indent
? " " : "", term
,
5035 _("options enabled: "), "");
5037 for (j
= 0; j
< ARRAY_SIZE (f_options
); j
++)
5038 if (*f_options
[j
].variable
== f_options
[j
].on_value
)
5039 pos
= print_single_switch (file
, pos
, max
, indent
, sep
, term
,
5040 "-f", f_options
[j
].string
);
5042 /* Print target specific options. */
5044 for (j
= 0; j
< ARRAY_SIZE (target_switches
); j
++)
5045 if (target_switches
[j
].name
[0] != '\0'
5046 && target_switches
[j
].value
> 0
5047 && ((target_switches
[j
].value
& target_flags
)
5048 == target_switches
[j
].value
))
5050 pos
= print_single_switch (file
, pos
, max
, indent
, sep
, term
,
5051 "-m", target_switches
[j
].name
);
5054 #ifdef TARGET_OPTIONS
5055 for (j
= 0; j
< ARRAY_SIZE (target_options
); j
++)
5056 if (*target_options
[j
].variable
!= NULL
)
5059 sprintf (prefix
, "-m%s", target_options
[j
].prefix
);
5060 pos
= print_single_switch (file
, pos
, max
, indent
, sep
, term
,
5061 prefix
, *target_options
[j
].variable
);
5065 fprintf (file
, "%s", term
);
5068 /* Record the beginning of a new source file, named FILENAME. */
5071 debug_start_source_file (filename
)
5072 register const char *filename ATTRIBUTE_UNUSED
;
5074 #ifdef DBX_DEBUGGING_INFO
5075 if (write_symbols
== DBX_DEBUG
)
5076 dbxout_start_new_source_file (filename
);
5078 #ifdef DWARF_DEBUGGING_INFO
5079 if (debug_info_level
== DINFO_LEVEL_VERBOSE
5080 && write_symbols
== DWARF_DEBUG
)
5081 dwarfout_start_new_source_file (filename
);
5082 #endif /* DWARF_DEBUGGING_INFO */
5083 #ifdef DWARF2_DEBUGGING_INFO
5084 if (write_symbols
== DWARF2_DEBUG
)
5085 dwarf2out_start_source_file (filename
);
5086 #endif /* DWARF2_DEBUGGING_INFO */
5087 #ifdef SDB_DEBUGGING_INFO
5088 if (write_symbols
== SDB_DEBUG
)
5089 sdbout_start_new_source_file (filename
);
5093 /* Record the resumption of a source file. LINENO is the line number in
5094 the source file we are returning to. */
5097 debug_end_source_file (lineno
)
5098 register unsigned lineno ATTRIBUTE_UNUSED
;
5100 #ifdef DBX_DEBUGGING_INFO
5101 if (write_symbols
== DBX_DEBUG
)
5102 dbxout_resume_previous_source_file ();
5104 #ifdef DWARF_DEBUGGING_INFO
5105 if (debug_info_level
== DINFO_LEVEL_VERBOSE
5106 && write_symbols
== DWARF_DEBUG
)
5107 dwarfout_resume_previous_source_file (lineno
);
5108 #endif /* DWARF_DEBUGGING_INFO */
5109 #ifdef DWARF2_DEBUGGING_INFO
5110 if (write_symbols
== DWARF2_DEBUG
)
5111 dwarf2out_end_source_file ();
5112 #endif /* DWARF2_DEBUGGING_INFO */
5113 #ifdef SDB_DEBUGGING_INFO
5114 if (write_symbols
== SDB_DEBUG
)
5115 sdbout_resume_previous_source_file ();
5119 /* Called from cb_define in c-lex.c. The `buffer' parameter contains
5120 the tail part of the directive line, i.e. the part which is past the
5121 initial whitespace, #, whitespace, directive-name, whitespace part. */
5124 debug_define (lineno
, buffer
)
5125 register unsigned lineno ATTRIBUTE_UNUSED
;
5126 register const char *buffer ATTRIBUTE_UNUSED
;
5128 #ifdef DWARF_DEBUGGING_INFO
5129 if (write_symbols
== DWARF_DEBUG
)
5130 dwarfout_define (lineno
, buffer
);
5131 #endif /* DWARF_DEBUGGING_INFO */
5132 #ifdef DWARF2_DEBUGGING_INFO
5133 if (write_symbols
== DWARF2_DEBUG
)
5134 dwarf2out_define (lineno
, buffer
);
5135 #endif /* DWARF2_DEBUGGING_INFO */
5138 /* Called from cb_undef in c-lex.c. The `buffer' parameter contains
5139 the tail part of the directive line, i.e. the part which is past the
5140 initial whitespace, #, whitespace, directive-name, whitespace part. */
5143 debug_undef (lineno
, buffer
)
5144 register unsigned lineno ATTRIBUTE_UNUSED
;
5145 register const char *buffer ATTRIBUTE_UNUSED
;
5147 #ifdef DWARF_DEBUGGING_INFO
5148 if (write_symbols
== DWARF_DEBUG
)
5149 dwarfout_undef (lineno
, buffer
);
5150 #endif /* DWARF_DEBUGGING_INFO */
5151 #ifdef DWARF2_DEBUGGING_INFO
5152 if (write_symbols
== DWARF2_DEBUG
)
5153 dwarf2out_undef (lineno
, buffer
);
5154 #endif /* DWARF2_DEBUGGING_INFO */
5157 /* Returns nonzero if it is appropriate not to emit any debugging
5158 information for BLOCK, because it doesn't contain any instructions.
5159 This may not be the case for blocks containing nested functions, since
5160 we may actually call such a function even though the BLOCK information
5164 debug_ignore_block (block
)
5165 tree block ATTRIBUTE_UNUSED
;
5167 /* Never delete the BLOCK for the outermost scope
5168 of the function; we can refer to names from
5169 that scope even if the block notes are messed up. */
5170 if (is_body_block (block
))
5173 #ifdef DWARF2_DEBUGGING_INFO
5174 if (write_symbols
== DWARF2_DEBUG
)
5175 return dwarf2out_ignore_block (block
);