tree-cfg.c (make_exit_edges): Use get_call_expr_in.
[gcc.git] / gcc / tree-tailcall.c
1 /* Tail call optimization on trees.
2 Copyright (C) 2003 Free Software Foundation, Inc.
3
4 This file is part of GCC.
5
6 GCC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
9 any later version.
10
11 GCC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
15
16 You should have received a copy of the GNU General Public License
17 along with GCC; see the file COPYING. If not, write to
18 the Free Software Foundation, 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
20
21 #include "config.h"
22 #include "system.h"
23 #include "coretypes.h"
24 #include "tm.h"
25 #include "tree.h"
26 #include "rtl.h"
27 #include "tm_p.h"
28 #include "hard-reg-set.h"
29 #include "basic-block.h"
30 #include "function.h"
31 #include "tree-flow.h"
32 #include "tree-dump.h"
33 #include "diagnostic.h"
34 #include "except.h"
35 #include "tree-pass.h"
36 #include "flags.h"
37 #include "langhooks.h"
38
39 /* The file implements the tail recursion elimination. It is also used to
40 analyze the tail calls in general, passing the results to the rtl level
41 where they are used for sibcall optimization.
42
43 In addition to the standard tail recursion elimination, we handle the most
44 trivial cases of making the call tail recursive by creating accumulators.
45 For example the following function
46
47 int sum (int n)
48 {
49 if (n > 0)
50 return n + sum (n - 1);
51 else
52 return 0;
53 }
54
55 is transformed into
56
57 int sum (int n)
58 {
59 int acc = 0;
60
61 while (n > 0)
62 acc += n--;
63
64 return acc;
65 }
66
67 To do this, we maintain two accumulators (a_acc and m_acc) that indicate
68 when we reach the return x statement, we should return a_acc + x * m_acc
69 instead. They are initially initialized to 0 and 1, respectively,
70 so the semantics of the function is obviously preserved. If we are
71 guaranteed that the value of the accumulator never change, we
72 omit the accumulator.
73
74 There are three cases how the function may exit. The first one is
75 handled in adjust_return_value, the other two in adjust_accumulator_values
76 (the second case is actually a special case of the third one and we
77 present it separately just for clarity):
78
79 1) Just return x, where x is not in any of the remaining special shapes.
80 We rewrite this to a gimple equivalent of return m_acc * x + a_acc.
81
82 2) return f (...), where f is the current function, is rewritten in a
83 classical tail-recursion elimination way, into assignment of arguments
84 and jump to the start of the function. Values of the accumulators
85 are unchanged.
86
87 3) return a + m * f(...), where a and m do not depend on call to f.
88 To preserve the semantics described before we want this to be rewritten
89 in such a way that we finally return
90
91 a_acc + (a + m * f(...)) * m_acc = (a_acc + a * m_acc) + (m * m_acc) * f(...).
92
93 I.e. we increase a_acc by a * m_acc, multiply m_acc by m and
94 eliminate the tail call to f. Special cases when the value is just
95 added or just multiplied are obtained by setting a = 0 or m = 1.
96
97 TODO -- it is possible to do similar tricks for other operations. */
98
99 /* A structure that describes the tailcall. */
100
101 struct tailcall
102 {
103 /* The block in that the call occur. */
104 basic_block call_block;
105
106 /* The iterator pointing to the call statement. */
107 block_stmt_iterator call_bsi;
108
109 /* True if it is a call to the current function. */
110 bool tail_recursion;
111
112 /* The return value of the caller is mult * f + add, where f is the return
113 value of the call. */
114 tree mult, add;
115
116 /* Next tailcall in the chain. */
117 struct tailcall *next;
118 };
119
120 /* The variables holding the value of multiplicative and additive
121 accumulator. */
122 static tree m_acc, a_acc;
123
124 static bool suitable_for_tail_opt_p (void);
125 static bool optimize_tail_call (struct tailcall *, bool);
126 static void eliminate_tail_call (struct tailcall *);
127 static void find_tail_calls (basic_block, struct tailcall **);
128
129 /* Returns false when the function is not suitable for tail call optimization
130 from some reason (e.g. if it takes variable number of arguments). */
131
132 static bool
133 suitable_for_tail_opt_p (void)
134 {
135 int i;
136
137 if (current_function_stdarg)
138 return false;
139
140 /* No local variable should be call-clobbered. We ignore any kind
141 of memory tag, as these are not real variables. */
142 for (i = 0; i < (int) VARRAY_ACTIVE_SIZE (referenced_vars); i++)
143 {
144 tree var = VARRAY_TREE (referenced_vars, i);
145
146 if (decl_function_context (var) == current_function_decl
147 && !TREE_STATIC (var)
148 && var_ann (var)->mem_tag_kind == NOT_A_TAG
149 && is_call_clobbered (var))
150 return false;
151 }
152
153 return true;
154 }
155 /* Returns false when the function is not suitable for tail call optimization
156 from some reason (e.g. if it takes variable number of arguments).
157 This test must pass in addition to suitable_for_tail_opt_p in order to make
158 tail call discovery happen. */
159
160 static bool
161 suitable_for_tail_call_opt_p (void)
162 {
163 /* alloca (until we have stack slot life analysis) inhibits
164 sibling call optimizations, but not tail recursion. */
165 if (current_function_calls_alloca)
166 return false;
167
168 /* If we are using sjlj exceptions, we may need to add a call to
169 _Unwind_SjLj_Unregister at exit of the function. Which means
170 that we cannot do any sibcall transformations. */
171 if (USING_SJLJ_EXCEPTIONS && current_function_has_exception_handlers ())
172 return false;
173
174 /* Any function that calls setjmp might have longjmp called from
175 any called function. ??? We really should represent this
176 properly in the CFG so that this needn't be special cased. */
177 if (current_function_calls_setjmp)
178 return false;
179
180 return true;
181 }
182
183 /* Checks whether the expression EXPR in stmt AT is independent of the
184 statement pointed by BSI (in a sense that we already know EXPR's value
185 at BSI). We use the fact that we are only called from the chain of
186 basic blocks that have only single successor. Returns the expression
187 containing the value of EXPR at BSI. */
188
189 static tree
190 independent_of_stmt_p (tree expr, tree at, block_stmt_iterator bsi)
191 {
192 basic_block bb, call_bb, at_bb;
193 edge e;
194
195 if (is_gimple_min_invariant (expr))
196 return expr;
197
198 if (TREE_CODE (expr) != SSA_NAME)
199 return NULL_TREE;
200
201 /* Mark the blocks in the chain leading to the end. */
202 at_bb = bb_for_stmt (at);
203 call_bb = bb_for_stmt (bsi_stmt (bsi));
204 for (bb = call_bb; bb != at_bb; bb = bb->succ->dest)
205 bb->aux = &bb->aux;
206 bb->aux = &bb->aux;
207
208 while (1)
209 {
210 at = SSA_NAME_DEF_STMT (expr);
211 bb = bb_for_stmt (at);
212
213 /* The default definition or defined before the chain. */
214 if (!bb || !bb->aux)
215 break;
216
217 if (bb == call_bb)
218 {
219 for (; !bsi_end_p (bsi); bsi_next (&bsi))
220 if (bsi_stmt (bsi) == at)
221 break;
222
223 if (!bsi_end_p (bsi))
224 expr = NULL_TREE;
225 break;
226 }
227
228 if (TREE_CODE (at) != PHI_NODE)
229 {
230 expr = NULL_TREE;
231 break;
232 }
233
234 for (e = bb->pred; e; e = e->pred_next)
235 if (e->src->aux)
236 break;
237 if (!e)
238 abort ();
239
240 expr = PHI_ARG_DEF_FROM_EDGE (at, e);
241 }
242
243 /* Unmark the blocks. */
244 for (bb = call_bb; bb != at_bb; bb = bb->succ->dest)
245 bb->aux = NULL;
246 bb->aux = NULL;
247
248 return expr;
249 }
250
251 /* Simulates the effect of an assignment of ASS in STMT on the return value
252 of the tail recursive CALL passed in ASS_VAR. M and A are the
253 multiplicative and the additive factor for the real return value. */
254
255 static bool
256 process_assignment (tree ass, tree stmt, block_stmt_iterator call, tree *m,
257 tree *a, tree *ass_var)
258 {
259 tree op0, op1, non_ass_var;
260 tree dest = TREE_OPERAND (ass, 0);
261 tree src = TREE_OPERAND (ass, 1);
262 enum tree_code code = TREE_CODE (src);
263 tree src_var = src;
264
265 /* See if this is a simple copy operation of an SSA name to the function
266 result. In that case we may have a simple tail call. Ignore type
267 conversions that can never produce extra code between the function
268 call and the function return. */
269 STRIP_NOPS (src_var);
270 if (TREE_CODE (src_var) == SSA_NAME)
271 {
272 if (src_var != *ass_var)
273 return false;
274
275 *ass_var = dest;
276 return true;
277 }
278
279 if (TREE_CODE_CLASS (code) != '2')
280 return false;
281
282 /* We only handle the code like
283
284 x = call ();
285 y = m * x;
286 z = y + a;
287 return z;
288
289 TODO -- Extend it for cases where the linear transformation of the output
290 is expressed in a more complicated way. */
291
292 op0 = TREE_OPERAND (src, 0);
293 op1 = TREE_OPERAND (src, 1);
294
295 if (op0 == *ass_var
296 && (non_ass_var = independent_of_stmt_p (op1, stmt, call)))
297 ;
298 else if (op1 == *ass_var
299 && (non_ass_var = independent_of_stmt_p (op0, stmt, call)))
300 ;
301 else
302 return false;
303
304 switch (code)
305 {
306 case PLUS_EXPR:
307 /* There should be no previous addition. TODO -- it should be fairly
308 straightforward to lift this restriction -- just allow storing
309 more complicated expressions in *A, and gimplify it in
310 adjust_accumulator_values. */
311 if (*a)
312 return false;
313 *a = non_ass_var;
314 *ass_var = dest;
315 return true;
316
317 case MULT_EXPR:
318 /* Similar remark applies here. Handling multiplication after addition
319 is just slightly more complicated -- we need to multiply both *A and
320 *M. */
321 if (*a || *m)
322 return false;
323 *m = non_ass_var;
324 *ass_var = dest;
325 return true;
326
327 /* TODO -- Handle other codes (NEGATE_EXPR, MINUS_EXPR). */
328
329 default:
330 return false;
331 }
332 }
333
334 /* Propagate VAR through phis on edge E. */
335
336 static tree
337 propagate_through_phis (tree var, edge e)
338 {
339 basic_block dest = e->dest;
340 tree phi;
341
342 for (phi = phi_nodes (dest); phi; phi = PHI_CHAIN (phi))
343 if (PHI_ARG_DEF_FROM_EDGE (phi, e) == var)
344 return PHI_RESULT (phi);
345
346 return var;
347 }
348
349 /* Finds tailcalls falling into basic block BB. The list of found tailcalls is
350 added to the start of RET. */
351
352 static void
353 find_tail_calls (basic_block bb, struct tailcall **ret)
354 {
355 tree ass_var, ret_var, stmt, func, param, args, call = NULL_TREE;
356 block_stmt_iterator bsi, absi;
357 bool tail_recursion;
358 struct tailcall *nw;
359 edge e;
360 tree m, a;
361 basic_block abb;
362 stmt_ann_t ann;
363
364 if (bb->succ->succ_next)
365 return;
366
367 for (bsi = bsi_last (bb); !bsi_end_p (bsi); bsi_prev (&bsi))
368 {
369 stmt = bsi_stmt (bsi);
370
371 /* Ignore labels. */
372 if (TREE_CODE (stmt) == LABEL_EXPR)
373 continue;
374
375 get_stmt_operands (stmt);
376
377 /* Check for a call. */
378 if (TREE_CODE (stmt) == MODIFY_EXPR)
379 {
380 ass_var = TREE_OPERAND (stmt, 0);
381 call = TREE_OPERAND (stmt, 1);
382 }
383 else
384 {
385 ass_var = NULL_TREE;
386 call = stmt;
387 }
388
389 if (TREE_CODE (call) == CALL_EXPR)
390 break;
391
392 /* If the statement has virtual operands, fail. */
393 ann = stmt_ann (stmt);
394 if (NUM_V_MAY_DEFS (V_MAY_DEF_OPS (ann))
395 || NUM_V_MUST_DEFS (V_MUST_DEF_OPS (ann))
396 || NUM_VUSES (VUSE_OPS (ann)))
397 return;
398 }
399
400 if (bsi_end_p (bsi))
401 {
402 /* Recurse to the predecessors. */
403 for (e = bb->pred; e; e = e->pred_next)
404 find_tail_calls (e->src, ret);
405
406 return;
407 }
408
409 /* We found the call, check whether it is suitable. */
410 tail_recursion = false;
411 func = get_callee_fndecl (call);
412 if (func == current_function_decl)
413 {
414 for (param = DECL_ARGUMENTS (func), args = TREE_OPERAND (call, 1);
415 param && args;
416 param = TREE_CHAIN (param), args = TREE_CHAIN (args))
417 {
418 tree arg = TREE_VALUE (args);
419 if (param != arg
420 /* Make sure there are no problems with copying. Note we must
421 have a copyable type and the two arguments must have reasonably
422 equivalent types. The latter requirement could be relaxed if
423 we emitted a suitable type conversion statement. */
424 && (!is_gimple_reg_type (TREE_TYPE (param))
425 || !lang_hooks.types_compatible_p (TREE_TYPE (param),
426 TREE_TYPE (arg))))
427 break;
428 }
429 if (!args && !param)
430 tail_recursion = true;
431 }
432
433 /* Now check the statements after the call. None of them has virtual
434 operands, so they may only depend on the call through its return
435 value. The return value should also be dependent on each of them,
436 since we are running after dce. */
437 m = NULL_TREE;
438 a = NULL_TREE;
439
440 abb = bb;
441 absi = bsi;
442 while (1)
443 {
444 bsi_next (&absi);
445
446 while (bsi_end_p (absi))
447 {
448 ass_var = propagate_through_phis (ass_var, abb->succ);
449 abb = abb->succ->dest;
450 absi = bsi_start (abb);
451 }
452
453 stmt = bsi_stmt (absi);
454
455 if (TREE_CODE (stmt) == LABEL_EXPR)
456 continue;
457
458 if (TREE_CODE (stmt) == RETURN_EXPR)
459 break;
460
461 if (TREE_CODE (stmt) != MODIFY_EXPR)
462 return;
463
464 if (!process_assignment (stmt, stmt, bsi, &m, &a, &ass_var))
465 return;
466 }
467
468 /* See if this is a tail call we can handle. */
469 ret_var = TREE_OPERAND (stmt, 0);
470 if (ret_var
471 && TREE_CODE (ret_var) == MODIFY_EXPR)
472 {
473 tree ret_op = TREE_OPERAND (ret_var, 1);
474 STRIP_NOPS (ret_op);
475 if (!tail_recursion
476 && TREE_CODE (ret_op) != SSA_NAME)
477 return;
478
479 if (!process_assignment (ret_var, stmt, bsi, &m, &a, &ass_var))
480 return;
481 ret_var = TREE_OPERAND (ret_var, 0);
482 }
483
484 /* We may proceed if there either is no return value, or the return value
485 is identical to the call's return. */
486 if (ret_var
487 && (ret_var != ass_var))
488 return;
489
490 /* If this is not a tail recursive call, we cannot handle addends or
491 multiplicands. */
492 if (!tail_recursion && (m || a))
493 return;
494
495 nw = xmalloc (sizeof (struct tailcall));
496
497 nw->call_block = bb;
498 nw->call_bsi = bsi;
499
500 nw->tail_recursion = tail_recursion;
501
502 nw->mult = m;
503 nw->add = a;
504
505 nw->next = *ret;
506 *ret = nw;
507 }
508
509 /* Adjust the accumulator values according to A and M after BSI, and update
510 the phi nodes on edge BACK. */
511
512 static void
513 adjust_accumulator_values (block_stmt_iterator bsi, tree m, tree a, edge back)
514 {
515 tree stmt, var, phi, tmp;
516 tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
517 tree a_acc_arg = a_acc, m_acc_arg = m_acc;
518
519 if (a)
520 {
521 if (m_acc)
522 {
523 if (integer_onep (a))
524 var = m_acc;
525 else
526 {
527 stmt = build (MODIFY_EXPR, ret_type, NULL_TREE,
528 build (MULT_EXPR, ret_type, m_acc, a));
529
530 tmp = create_tmp_var (ret_type, "acc_tmp");
531 add_referenced_tmp_var (tmp);
532
533 var = make_ssa_name (tmp, stmt);
534 TREE_OPERAND (stmt, 0) = var;
535 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
536 }
537 }
538 else
539 var = a;
540
541 stmt = build (MODIFY_EXPR, ret_type, NULL_TREE,
542 build (PLUS_EXPR, ret_type, a_acc, var));
543 var = make_ssa_name (SSA_NAME_VAR (a_acc), stmt);
544 TREE_OPERAND (stmt, 0) = var;
545 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
546 a_acc_arg = var;
547 }
548
549 if (m)
550 {
551 stmt = build (MODIFY_EXPR, ret_type, NULL_TREE,
552 build (MULT_EXPR, ret_type, m_acc, m));
553 var = make_ssa_name (SSA_NAME_VAR (m_acc), stmt);
554 TREE_OPERAND (stmt, 0) = var;
555 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
556 m_acc_arg = var;
557 }
558
559 if (a_acc)
560 {
561 for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
562 if (PHI_RESULT (phi) == a_acc)
563 break;
564
565 add_phi_arg (&phi, a_acc_arg, back);
566 }
567
568 if (m_acc)
569 {
570 for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
571 if (PHI_RESULT (phi) == m_acc)
572 break;
573
574 add_phi_arg (&phi, m_acc_arg, back);
575 }
576 }
577
578 /* Adjust value of the return at the end of BB according to M and A
579 accumulators. */
580
581 static void
582 adjust_return_value (basic_block bb, tree m, tree a)
583 {
584 tree ret_stmt = last_stmt (bb), ret_var, var, stmt, tmp;
585 tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
586 block_stmt_iterator bsi = bsi_last (bb);
587
588 if (TREE_CODE (ret_stmt) != RETURN_EXPR)
589 abort ();
590
591 ret_var = TREE_OPERAND (ret_stmt, 0);
592 if (!ret_var)
593 return;
594
595 if (TREE_CODE (ret_var) == MODIFY_EXPR)
596 {
597 ret_var->common.ann = (tree_ann_t) stmt_ann (ret_stmt);
598 bsi_replace (&bsi, ret_var, true);
599 SSA_NAME_DEF_STMT (TREE_OPERAND (ret_var, 0)) = ret_var;
600 ret_var = TREE_OPERAND (ret_var, 0);
601 ret_stmt = build1 (RETURN_EXPR, TREE_TYPE (ret_stmt), ret_var);
602 bsi_insert_after (&bsi, ret_stmt, BSI_NEW_STMT);
603 }
604
605 if (m)
606 {
607 stmt = build (MODIFY_EXPR, ret_type, NULL_TREE,
608 build (MULT_EXPR, ret_type, m_acc, ret_var));
609
610 tmp = create_tmp_var (ret_type, "acc_tmp");
611 add_referenced_tmp_var (tmp);
612
613 var = make_ssa_name (tmp, stmt);
614 TREE_OPERAND (stmt, 0) = var;
615 bsi_insert_before (&bsi, stmt, BSI_NEW_STMT);
616 }
617 else
618 var = ret_var;
619
620 if (a)
621 {
622 stmt = build (MODIFY_EXPR, ret_type, NULL_TREE,
623 build (PLUS_EXPR, ret_type, a_acc, var));
624
625 tmp = create_tmp_var (ret_type, "acc_tmp");
626 add_referenced_tmp_var (tmp);
627
628 var = make_ssa_name (tmp, stmt);
629 TREE_OPERAND (stmt, 0) = var;
630 bsi_insert_before (&bsi, stmt, BSI_NEW_STMT);
631 }
632
633 TREE_OPERAND (ret_stmt, 0) = var;
634 modify_stmt (ret_stmt);
635 }
636
637 /* Eliminates tail call described by T. TMP_VARS is a list of
638 temporary variables used to copy the function arguments. */
639
640 static void
641 eliminate_tail_call (struct tailcall *t)
642 {
643 tree param, stmt, args, rslt, call;
644 basic_block bb, first;
645 edge e;
646 tree phi;
647 stmt_ann_t ann;
648 v_may_def_optype v_may_defs;
649 unsigned i;
650
651 stmt = bsi_stmt (t->call_bsi);
652 get_stmt_operands (stmt);
653 ann = stmt_ann (stmt);
654 bb = t->call_block;
655
656 if (dump_file && (dump_flags & TDF_DETAILS))
657 {
658 fprintf (dump_file, "Eliminated tail recursion in bb %d : ",
659 bb->index);
660 print_generic_stmt (dump_file, stmt, TDF_SLIM);
661 fprintf (dump_file, "\n");
662 }
663
664 if (TREE_CODE (stmt) == MODIFY_EXPR)
665 stmt = TREE_OPERAND (stmt, 1);
666
667 first = ENTRY_BLOCK_PTR->succ->dest;
668
669 /* Replace the call by a jump to the start of function. */
670 e = redirect_edge_and_branch (t->call_block->succ, first);
671 if (!e)
672 abort ();
673 PENDING_STMT (e) = NULL_TREE;
674
675 /* Add phi node entries for arguments. Not every PHI node corresponds to
676 a function argument (there may be PHI nodes for virtual definitions of the
677 eliminated calls), so we search for a PHI corresponding to each argument
678 rather than searching for which argument a PHI node corresponds to. */
679
680 for (param = DECL_ARGUMENTS (current_function_decl),
681 args = TREE_OPERAND (stmt, 1);
682 param;
683 param = TREE_CHAIN (param),
684 args = TREE_CHAIN (args))
685 {
686
687 for (phi = phi_nodes (first); phi; phi = PHI_CHAIN (phi))
688 if (param == SSA_NAME_VAR (PHI_RESULT (phi)))
689 break;
690
691 /* The phi node indeed does not have to be there, in case the operand is
692 invariant in the function. */
693 if (!phi)
694 continue;
695
696 add_phi_arg (&phi, TREE_VALUE (args), e);
697 }
698
699 /* Add phi nodes for the call clobbered variables. */
700 v_may_defs = V_MAY_DEF_OPS (ann);
701 for (i = 0; i < NUM_V_MAY_DEFS (v_may_defs); i++)
702 {
703 param = SSA_NAME_VAR (V_MAY_DEF_RESULT (v_may_defs, i));
704 for (phi = phi_nodes (first); phi; phi = PHI_CHAIN (phi))
705 if (param == SSA_NAME_VAR (PHI_RESULT (phi)))
706 break;
707
708 if (!phi)
709 {
710 tree name = var_ann (param)->default_def;
711 tree new_name = make_ssa_name (param, SSA_NAME_DEF_STMT (name));
712
713 var_ann (param)->default_def = new_name;
714 phi = create_phi_node (name, first);
715 SSA_NAME_DEF_STMT (name) = phi;
716 add_phi_arg (&phi, new_name, ENTRY_BLOCK_PTR->succ);
717
718 /* For all calls the same set of variables should be clobbered. This
719 means that there always should be the appropriate phi node except
720 for the first time we eliminate the call. */
721 if (first->pred->pred_next->pred_next)
722 abort ();
723 }
724
725 add_phi_arg (&phi, V_MAY_DEF_OP (v_may_defs, i), e);
726 }
727
728 /* Update the values of accumulators. */
729 adjust_accumulator_values (t->call_bsi, t->mult, t->add, e);
730
731 call = bsi_stmt (t->call_bsi);
732 if (TREE_CODE (call) == MODIFY_EXPR)
733 {
734 rslt = TREE_OPERAND (call, 0);
735
736 /* Result of the call will no longer be defined. So adjust the
737 SSA_NAME_DEF_STMT accordingly. */
738 SSA_NAME_DEF_STMT (rslt) = build_empty_stmt ();
739 }
740
741 bsi_remove (&t->call_bsi);
742 }
743
744 /* Optimizes the tailcall described by T. If OPT_TAILCALLS is true, also
745 mark the tailcalls for the sibcall optimization. */
746
747 static bool
748 optimize_tail_call (struct tailcall *t, bool opt_tailcalls)
749 {
750 if (t->tail_recursion)
751 {
752 eliminate_tail_call (t);
753 return true;
754 }
755
756 if (opt_tailcalls)
757 {
758 tree stmt = bsi_stmt (t->call_bsi);
759
760 stmt = get_call_expr_in (stmt);
761 CALL_EXPR_TAILCALL (stmt) = 1;
762 if (dump_file && (dump_flags & TDF_DETAILS))
763 {
764 fprintf (dump_file, "Found tail call ");
765 print_generic_expr (dump_file, stmt, dump_flags);
766 fprintf (dump_file, " in bb %i\n", t->call_block->index);
767 }
768 }
769
770 return false;
771 }
772
773 /* Optimizes tail calls in the function, turning the tail recursion
774 into iteration. */
775
776 static void
777 tree_optimize_tail_calls_1 (bool opt_tailcalls)
778 {
779 edge e;
780 bool phis_constructed = false;
781 struct tailcall *tailcalls = NULL, *act, *next;
782 bool changed = false;
783 basic_block first = ENTRY_BLOCK_PTR->succ->dest;
784 tree stmt, param, ret_type, tmp, phi;
785
786 if (!suitable_for_tail_opt_p ())
787 return;
788 if (opt_tailcalls)
789 opt_tailcalls = suitable_for_tail_call_opt_p ();
790
791 for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
792 {
793 /* Only traverse the normal exits, i.e. those that end with return
794 statement. */
795 stmt = last_stmt (e->src);
796
797 if (stmt
798 && TREE_CODE (stmt) == RETURN_EXPR)
799 find_tail_calls (e->src, &tailcalls);
800 }
801
802 /* Construct the phi nodes and accumulators if necessary. */
803 a_acc = m_acc = NULL_TREE;
804 for (act = tailcalls; act; act = act->next)
805 {
806 if (!act->tail_recursion)
807 continue;
808
809 if (!phis_constructed)
810 {
811 /* Ensure that there is only one predecessor of the block. */
812 if (first->pred->pred_next)
813 first = split_edge (ENTRY_BLOCK_PTR->succ);
814
815 /* Copy the args if needed. */
816 for (param = DECL_ARGUMENTS (current_function_decl);
817 param;
818 param = TREE_CHAIN (param))
819 if (var_ann (param)
820 /* Also parameters that are only defined but never used need not
821 be copied. */
822 && (var_ann (param)->default_def
823 && TREE_CODE (var_ann (param)->default_def) == SSA_NAME))
824 {
825 tree name = var_ann (param)->default_def;
826 tree new_name = make_ssa_name (param, SSA_NAME_DEF_STMT (name));
827 tree phi;
828
829 var_ann (param)->default_def = new_name;
830 phi = create_phi_node (name, first);
831 SSA_NAME_DEF_STMT (name) = phi;
832 add_phi_arg (&phi, new_name, first->pred);
833 }
834 phis_constructed = true;
835 }
836
837 if (act->add && !a_acc)
838 {
839 ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
840
841 tmp = create_tmp_var (ret_type, "add_acc");
842 add_referenced_tmp_var (tmp);
843
844 phi = create_phi_node (tmp, first);
845 add_phi_arg (&phi, fold_convert (ret_type, integer_zero_node),
846 first->pred);
847 a_acc = PHI_RESULT (phi);
848 }
849
850 if (act->mult && !m_acc)
851 {
852 ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
853
854 tmp = create_tmp_var (ret_type, "mult_acc");
855 add_referenced_tmp_var (tmp);
856
857 phi = create_phi_node (tmp, first);
858 add_phi_arg (&phi, fold_convert (ret_type, integer_one_node),
859 first->pred);
860 m_acc = PHI_RESULT (phi);
861 }
862 }
863
864 for (; tailcalls; tailcalls = next)
865 {
866 next = tailcalls->next;
867 changed |= optimize_tail_call (tailcalls, opt_tailcalls);
868 free (tailcalls);
869 }
870
871 if (a_acc || m_acc)
872 {
873 /* Modify the remaining return statements. */
874 for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
875 {
876 stmt = last_stmt (e->src);
877
878 if (stmt
879 && TREE_CODE (stmt) == RETURN_EXPR)
880 adjust_return_value (e->src, m_acc, a_acc);
881 }
882 }
883
884 if (changed)
885 {
886 free_dominance_info (CDI_DOMINATORS);
887 cleanup_tree_cfg ();
888 }
889 }
890
891 static void
892 execute_tail_recursion (void)
893 {
894 tree_optimize_tail_calls_1 (false);
895 }
896
897 static bool
898 gate_tail_calls (void)
899 {
900 return flag_optimize_sibling_calls != 0;
901 }
902
903 static void
904 execute_tail_calls (void)
905 {
906 tree_optimize_tail_calls_1 (true);
907 }
908
909 struct tree_opt_pass pass_tail_recursion =
910 {
911 "tailr", /* name */
912 NULL, /* gate */
913 execute_tail_recursion, /* execute */
914 NULL, /* sub */
915 NULL, /* next */
916 0, /* static_pass_number */
917 0, /* tv_id */
918 PROP_cfg | PROP_ssa, /* properties_required */
919 0, /* properties_provided */
920 0, /* properties_destroyed */
921 0, /* todo_flags_start */
922 TODO_dump_func | TODO_verify_ssa /* todo_flags_finish */
923 };
924
925 struct tree_opt_pass pass_tail_calls =
926 {
927 "tailc", /* name */
928 gate_tail_calls, /* gate */
929 execute_tail_calls, /* execute */
930 NULL, /* sub */
931 NULL, /* next */
932 0, /* static_pass_number */
933 0, /* tv_id */
934 PROP_cfg | PROP_ssa, /* properties_required */
935 0, /* properties_provided */
936 0, /* properties_destroyed */
937 0, /* todo_flags_start */
938 TODO_dump_func | TODO_verify_ssa /* todo_flags_finish */
939 };